linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] Input: edt-ft5x06 - consolidate handling of number of electrodes
@ 2020-12-09 23:09 Dmitry Torokhov
  2020-12-10  9:50 ` Andy Shevchenko
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Dmitry Torokhov @ 2020-12-09 23:09 UTC (permalink / raw)
  To: linux-input
  Cc: Marco Felsch, Andy Shevchenko, Philipp Zabel, Simon Budig, linux-kernel

Instead of using special-casing retrieval of number of X/Y electrodes
based on the firmware, let's select default values and mark registers as
non-existent on firmwares that do not support this operation.

Also mark "report rate" register as non-existent for generic firmwares as
having it set to 0 does not make sense.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/touchscreen/edt-ft5x06.c | 43 ++++++++++----------------
 1 file changed, 17 insertions(+), 26 deletions(-)

diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 6ff81d48da86..2eefbc2485bc 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -69,6 +69,9 @@
 #define EDT_RAW_DATA_RETRIES		100
 #define EDT_RAW_DATA_DELAY		1000 /* usec */
 
+#define EDT_DEFAULT_NUM_X		1024
+#define EDT_DEFAULT_NUM_Y		1024
+
 enum edt_pmode {
 	EDT_PMODE_NOT_SUPPORTED,
 	EDT_PMODE_HIBERNATE,
@@ -977,8 +980,7 @@ static void edt_ft5x06_ts_get_defaults(struct device *dev,
 	}
 }
 
-static void
-edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
+static void edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
 {
 	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
 
@@ -997,21 +999,17 @@ edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
 	if (reg_addr->reg_report_rate != NO_REGISTER)
 		tsdata->report_rate = edt_ft5x06_register_read(tsdata,
 						reg_addr->reg_report_rate);
-	if (tsdata->version == EDT_M06 ||
-	    tsdata->version == EDT_M09 ||
-	    tsdata->version == EDT_M12) {
+	tsdata->num_x = EDT_DEFAULT_NUM_X;
+	if (reg_addr->reg_num_x != NO_REGISTER)
 		tsdata->num_x = edt_ft5x06_register_read(tsdata,
 							 reg_addr->reg_num_x);
+	tsdata->num_y = EDT_DEFAULT_NUM_Y;
+	if (reg_addr->reg_num_y != NO_REGISTER)
 		tsdata->num_y = edt_ft5x06_register_read(tsdata,
 							 reg_addr->reg_num_y);
-	} else {
-		tsdata->num_x = -1;
-		tsdata->num_y = -1;
-	}
 }
 
-static void
-edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
+static void edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
 {
 	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
 
@@ -1041,22 +1039,25 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
 
 	case EV_FT:
 		reg_addr->reg_threshold = EV_REGISTER_THRESHOLD;
+		reg_addr->reg_report_rate = NO_REGISTER;
 		reg_addr->reg_gain = EV_REGISTER_GAIN;
 		reg_addr->reg_offset = NO_REGISTER;
 		reg_addr->reg_offset_x = EV_REGISTER_OFFSET_X;
 		reg_addr->reg_offset_y = EV_REGISTER_OFFSET_Y;
 		reg_addr->reg_num_x = NO_REGISTER;
 		reg_addr->reg_num_y = NO_REGISTER;
-		reg_addr->reg_report_rate = NO_REGISTER;
 		break;
 
 	case GENERIC_FT:
 		/* this is a guesswork */
 		reg_addr->reg_threshold = M09_REGISTER_THRESHOLD;
+		reg_addr->reg_report_rate = NO_REGISTER;
 		reg_addr->reg_gain = M09_REGISTER_GAIN;
 		reg_addr->reg_offset = M09_REGISTER_OFFSET;
 		reg_addr->reg_offset_x = NO_REGISTER;
 		reg_addr->reg_offset_y = NO_REGISTER;
+		reg_addr->reg_num_x = NO_REGISTER;
+		reg_addr->reg_num_y = NO_REGISTER;
 		break;
 	}
 }
@@ -1195,20 +1196,10 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	input->id.bustype = BUS_I2C;
 	input->dev.parent = &client->dev;
 
-	if (tsdata->version == EDT_M06 ||
-	    tsdata->version == EDT_M09 ||
-	    tsdata->version == EDT_M12) {
-		input_set_abs_params(input, ABS_MT_POSITION_X,
-				     0, tsdata->num_x * 64 - 1, 0, 0);
-		input_set_abs_params(input, ABS_MT_POSITION_Y,
-				     0, tsdata->num_y * 64 - 1, 0, 0);
-	} else {
-		/* Unknown maximum values. Specify via devicetree */
-		input_set_abs_params(input, ABS_MT_POSITION_X,
-				     0, 65535, 0, 0);
-		input_set_abs_params(input, ABS_MT_POSITION_Y,
-				     0, 65535, 0, 0);
-	}
+	input_set_abs_params(input, ABS_MT_POSITION_X,
+			     0, tsdata->num_x * 64 - 1, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y,
+			     0, tsdata->num_y * 64 - 1, 0, 0);
 
 	touchscreen_parse_properties(input, true, &tsdata->prop);
 
-- 
2.29.2.576.ga3fc446d84-goog


-- 
Dmitry

^ permalink raw reply related	[flat|nested] 5+ messages in thread
* Re: [PATCH] Input: edt-ft5x06 - consolidate handling of number of electrodes
  2020-12-09 23:09 [PATCH] Input: edt-ft5x06 - consolidate handling of number of electrodes Dmitry Torokhov
@ 2020-12-10  9:50 ` Andy Shevchenko
  2020-12-10 10:08 ` Marco Felsch
  2020-12-10 12:29 ` Simon Budig
  2 siblings, 0 replies; 5+ messages in thread
From: Andy Shevchenko @ 2020-12-10  9:50 UTC (permalink / raw)
  To: Dmitry Torokhov
  Cc: linux-input, Marco Felsch, Philipp Zabel, Simon Budig, linux-kernel

On Wed, Dec 09, 2020 at 03:09:10PM -0800, Dmitry Torokhov wrote:
> Instead of using special-casing retrieval of number of X/Y electrodes
> based on the firmware, let's select default values and mark registers as
> non-existent on firmwares that do not support this operation.
> 
> Also mark "report rate" register as non-existent for generic firmwares as
> having it set to 0 does not make sense.

Makes sense, FWIW,
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
>  drivers/input/touchscreen/edt-ft5x06.c | 43 ++++++++++----------------
>  1 file changed, 17 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
> index 6ff81d48da86..2eefbc2485bc 100644
> --- a/drivers/input/touchscreen/edt-ft5x06.c
> +++ b/drivers/input/touchscreen/edt-ft5x06.c
> @@ -69,6 +69,9 @@
>  #define EDT_RAW_DATA_RETRIES		100
>  #define EDT_RAW_DATA_DELAY		1000 /* usec */
>  
> +#define EDT_DEFAULT_NUM_X		1024
> +#define EDT_DEFAULT_NUM_Y		1024
> +
>  enum edt_pmode {
>  	EDT_PMODE_NOT_SUPPORTED,
>  	EDT_PMODE_HIBERNATE,
> @@ -977,8 +980,7 @@ static void edt_ft5x06_ts_get_defaults(struct device *dev,
>  	}
>  }
>  
> -static void
> -edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
> +static void edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
>  {
>  	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
>  
> @@ -997,21 +999,17 @@ edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
>  	if (reg_addr->reg_report_rate != NO_REGISTER)
>  		tsdata->report_rate = edt_ft5x06_register_read(tsdata,
>  						reg_addr->reg_report_rate);
> -	if (tsdata->version == EDT_M06 ||
> -	    tsdata->version == EDT_M09 ||
> -	    tsdata->version == EDT_M12) {
> +	tsdata->num_x = EDT_DEFAULT_NUM_X;
> +	if (reg_addr->reg_num_x != NO_REGISTER)
>  		tsdata->num_x = edt_ft5x06_register_read(tsdata,
>  							 reg_addr->reg_num_x);
> +	tsdata->num_y = EDT_DEFAULT_NUM_Y;
> +	if (reg_addr->reg_num_y != NO_REGISTER)
>  		tsdata->num_y = edt_ft5x06_register_read(tsdata,
>  							 reg_addr->reg_num_y);
> -	} else {
> -		tsdata->num_x = -1;
> -		tsdata->num_y = -1;
> -	}
>  }
>  
> -static void
> -edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
> +static void edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
>  {
>  	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
>  
> @@ -1041,22 +1039,25 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
>  
>  	case EV_FT:
>  		reg_addr->reg_threshold = EV_REGISTER_THRESHOLD;
> +		reg_addr->reg_report_rate = NO_REGISTER;
>  		reg_addr->reg_gain = EV_REGISTER_GAIN;
>  		reg_addr->reg_offset = NO_REGISTER;
>  		reg_addr->reg_offset_x = EV_REGISTER_OFFSET_X;
>  		reg_addr->reg_offset_y = EV_REGISTER_OFFSET_Y;
>  		reg_addr->reg_num_x = NO_REGISTER;
>  		reg_addr->reg_num_y = NO_REGISTER;
> -		reg_addr->reg_report_rate = NO_REGISTER;
>  		break;
>  
>  	case GENERIC_FT:
>  		/* this is a guesswork */
>  		reg_addr->reg_threshold = M09_REGISTER_THRESHOLD;
> +		reg_addr->reg_report_rate = NO_REGISTER;
>  		reg_addr->reg_gain = M09_REGISTER_GAIN;
>  		reg_addr->reg_offset = M09_REGISTER_OFFSET;
>  		reg_addr->reg_offset_x = NO_REGISTER;
>  		reg_addr->reg_offset_y = NO_REGISTER;
> +		reg_addr->reg_num_x = NO_REGISTER;
> +		reg_addr->reg_num_y = NO_REGISTER;
>  		break;
>  	}
>  }
> @@ -1195,20 +1196,10 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
>  	input->id.bustype = BUS_I2C;
>  	input->dev.parent = &client->dev;
>  
> -	if (tsdata->version == EDT_M06 ||
> -	    tsdata->version == EDT_M09 ||
> -	    tsdata->version == EDT_M12) {
> -		input_set_abs_params(input, ABS_MT_POSITION_X,
> -				     0, tsdata->num_x * 64 - 1, 0, 0);
> -		input_set_abs_params(input, ABS_MT_POSITION_Y,
> -				     0, tsdata->num_y * 64 - 1, 0, 0);
> -	} else {
> -		/* Unknown maximum values. Specify via devicetree */
> -		input_set_abs_params(input, ABS_MT_POSITION_X,
> -				     0, 65535, 0, 0);
> -		input_set_abs_params(input, ABS_MT_POSITION_Y,
> -				     0, 65535, 0, 0);
> -	}
> +	input_set_abs_params(input, ABS_MT_POSITION_X,
> +			     0, tsdata->num_x * 64 - 1, 0, 0);
> +	input_set_abs_params(input, ABS_MT_POSITION_Y,
> +			     0, tsdata->num_y * 64 - 1, 0, 0);
>  
>  	touchscreen_parse_properties(input, true, &tsdata->prop);
>  
> -- 
> 2.29.2.576.ga3fc446d84-goog
> 
> 
> -- 
> Dmitry

-- 
With Best Regards,
Andy Shevchenko



^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [PATCH] Input: edt-ft5x06 - consolidate handling of number of electrodes
  2020-12-09 23:09 [PATCH] Input: edt-ft5x06 - consolidate handling of number of electrodes Dmitry Torokhov
  2020-12-10  9:50 ` Andy Shevchenko
@ 2020-12-10 10:08 ` Marco Felsch
  2020-12-10 11:33   ` Andy Shevchenko
  2020-12-10 12:29 ` Simon Budig
  2 siblings, 1 reply; 5+ messages in thread
From: Marco Felsch @ 2020-12-10 10:08 UTC (permalink / raw)
  To: Dmitry Torokhov
  Cc: linux-input, Andy Shevchenko, Philipp Zabel, Simon Budig, linux-kernel

Hi Dmitry,

On 20-12-09 15:09, Dmitry Torokhov wrote:
> Instead of using special-casing retrieval of number of X/Y electrodes
> based on the firmware, let's select default values and mark registers as
> non-existent on firmwares that do not support this operation.
> 
> Also mark "report rate" register as non-existent for generic firmwares as
> having it set to 0 does not make sense.
> 
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
>  drivers/input/touchscreen/edt-ft5x06.c | 43 ++++++++++----------------
>  1 file changed, 17 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
> index 6ff81d48da86..2eefbc2485bc 100644
> --- a/drivers/input/touchscreen/edt-ft5x06.c
> +++ b/drivers/input/touchscreen/edt-ft5x06.c
> @@ -69,6 +69,9 @@

...

>  	case EV_FT:
>  		reg_addr->reg_threshold = EV_REGISTER_THRESHOLD;
> +		reg_addr->reg_report_rate = NO_REGISTER;
>  		reg_addr->reg_gain = EV_REGISTER_GAIN;
>  		reg_addr->reg_offset = NO_REGISTER;
>  		reg_addr->reg_offset_x = EV_REGISTER_OFFSET_X;
>  		reg_addr->reg_offset_y = EV_REGISTER_OFFSET_Y;
>  		reg_addr->reg_num_x = NO_REGISTER;
>  		reg_addr->reg_num_y = NO_REGISTER;
> -		reg_addr->reg_report_rate = NO_REGISTER;
>  		break;

Nit:
Unrelated change.

However the patch looks good, thanks.

Acked-by: Marco Felsch <m.felsch@pengutronix.de>

Regards,
  Marco

^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [PATCH] Input: edt-ft5x06 - consolidate handling of number of electrodes
  2020-12-10 10:08 ` Marco Felsch
@ 2020-12-10 11:33   ` Andy Shevchenko
  0 siblings, 0 replies; 5+ messages in thread
From: Andy Shevchenko @ 2020-12-10 11:33 UTC (permalink / raw)
  To: Marco Felsch
  Cc: Dmitry Torokhov, linux-input, Philipp Zabel, Simon Budig, linux-kernel

On Thu, Dec 10, 2020 at 11:08:03AM +0100, Marco Felsch wrote:
> On 20-12-09 15:09, Dmitry Torokhov wrote:

...

> >  	case EV_FT:
> >  		reg_addr->reg_threshold = EV_REGISTER_THRESHOLD;
> > +		reg_addr->reg_report_rate = NO_REGISTER;
> >  		reg_addr->reg_gain = EV_REGISTER_GAIN;
> >  		reg_addr->reg_offset = NO_REGISTER;
> >  		reg_addr->reg_offset_x = EV_REGISTER_OFFSET_X;
> >  		reg_addr->reg_offset_y = EV_REGISTER_OFFSET_Y;
> >  		reg_addr->reg_num_x = NO_REGISTER;
> >  		reg_addr->reg_num_y = NO_REGISTER;
> > -		reg_addr->reg_report_rate = NO_REGISTER;
> >  		break;
> 
> Nit:
> Unrelated change.

I guess the motive is to get these assignments consistent between the cases.
Documentation actually allows this kind of modifications of code in one change
when them are toughly related.

-- 
With Best Regards,
Andy Shevchenko



^ permalink raw reply	[flat|nested] 5+ messages in thread
* Re: [PATCH] Input: edt-ft5x06 - consolidate handling of number of electrodes
  2020-12-09 23:09 [PATCH] Input: edt-ft5x06 - consolidate handling of number of electrodes Dmitry Torokhov
  2020-12-10  9:50 ` Andy Shevchenko
  2020-12-10 10:08 ` Marco Felsch
@ 2020-12-10 12:29 ` Simon Budig
  2 siblings, 0 replies; 5+ messages in thread
From: Simon Budig @ 2020-12-10 12:29 UTC (permalink / raw)
  To: Dmitry Torokhov, linux-input
  Cc: Marco Felsch, Andy Shevchenko, Philipp Zabel, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 821 bytes --]

On Wed, 2020-12-09 at 15:09 -0800, Dmitry Torokhov wrote:
> Instead of using special-casing retrieval of number of X/Y electrodes
> based on the firmware, let's select default values and mark registers
> as
> non-existent on firmwares that do not support this operation.
> 
> Also mark "report rate" register as non-existent for generic
> firmwares as
> having it set to 0 does not make sense.

Looks good.

Reviewed-by: Simon Budig <simon.budig@kernelconcepts.de>

Thanks,
        Simon
-- 
     kernel concepts GmbH                 Simon Budig
     Hauptstraße 16                       simon.budig@kernelconcepts.de
     D-57076 Siegen                       +49-271-771091-17
     http://www.kernelconcepts.de/
     HR Siegen, HR B 9613; Geschäftsführer: Ole Reinhardt

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-12-10 13:09 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-09 23:09 [PATCH] Input: edt-ft5x06 - consolidate handling of number of electrodes Dmitry Torokhov
2020-12-10  9:50 ` Andy Shevchenko
2020-12-10 10:08 ` Marco Felsch
2020-12-10 11:33   ` Andy Shevchenko
2020-12-10 12:29 ` Simon Budig

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).