From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-15.8 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER,INCLUDES_PATCH,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS, URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7C04CC4361B for ; Mon, 14 Dec 2020 08:53:28 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 0D549206C3 for ; Mon, 14 Dec 2020 08:53:27 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2439461AbgLNIx1 (ORCPT ); Mon, 14 Dec 2020 03:53:27 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49584 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2407249AbgLNIxR (ORCPT ); Mon, 14 Dec 2020 03:53:17 -0500 Received: from mail-pf1-x443.google.com (mail-pf1-x443.google.com [IPv6:2607:f8b0:4864:20::443]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 44F12C061793 for ; Mon, 14 Dec 2020 00:52:37 -0800 (PST) Received: by mail-pf1-x443.google.com with SMTP id 131so11638977pfb.9 for ; Mon, 14 Dec 2020 00:52:37 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=chromium.org; s=google; h=date:from:to:cc:subject:message-id:references:mime-version :content-disposition:in-reply-to; bh=kdiDmjyGHdA5QM4nzdg7uco0WpjPQgLAEHHA1WzZ7To=; b=kXZktvb4hXFyHQ4m2w+x9MgyeEdTUrUp9MlYZhN5GTs5Q3BlPzrU0b6CQHgtIl6uJu Qt+Ia+SEZ2J9zsWMmmCxiEPM2kiNHgTsI8dp0VNj4Dfu5EYeEB3RrNjlSfRnW0ZOQ54Q b/gdg66n+XUwjcD7Kh6W+uMv4KjfVJZaZNsW4= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=kdiDmjyGHdA5QM4nzdg7uco0WpjPQgLAEHHA1WzZ7To=; b=VUTQGnx/1oLmAzvl1HqMYV1m6zfJoG9U95v50FNL3AlU3k1LWco1AY1c1OZg1PAsed SgPMM2eSW0X2EXSfFaeDsoz4M9cUPfwrE2BoDjKhnl/K3cvVm5m9aG42W7Y4a/wMKUf4 /2ma14LhI5QoqQ+GcsF4mcEdL1j15XmQ4TrR2O2xC8NDMNoYbOCfbg8eAdvxlAi4SXt8 s4TKUUT77eM20AJ4EiuZtQq2veFN0BRC3kUSBanug7bJSXh9XuXxLwRlII0DfJH89QH4 qGsXm2yxcy44A51NKjVEeDf+V0UHElI8M2tosQExwjxon3moBfwZMtTfm+w5q496c+mj 0Ysg== X-Gm-Message-State: AOAM531NCkibDQ4loXQ/Jlz1NA4Zkj4eEOWHzgjaFgh/tKZpGG8Eohzy TLGnMRTccndUJNkcx8LDgV2rHA== X-Google-Smtp-Source: ABdhPJxg+hqv6Y9LfDrapqw32IauK2dDuFTRJR8Db0CEpFIJwAOSGNhaPHFddBKucQF5Ezie9YMcKw== X-Received: by 2002:a05:6a00:8c4:b029:196:6931:2927 with SMTP id s4-20020a056a0008c4b029019669312927mr22745869pfu.56.1607935956278; Mon, 14 Dec 2020 00:52:36 -0800 (PST) Received: from chromium.org ([2401:fa00:8f:2:a28c:fdff:fef0:43bf]) by smtp.gmail.com with ESMTPSA id ft19sm8751358pjb.44.2020.12.14.00.52.31 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 14 Dec 2020 00:52:35 -0800 (PST) Date: Mon, 14 Dec 2020 17:52:29 +0900 From: Tomasz Figa To: Helen Koike Cc: mchehab@kernel.org, hans.verkuil@cisco.com, laurent.pinchart@ideasonboard.com, sakari.ailus@iki.fi, linux-media@vger.kernel.org, Boris Brezillon , hiroh@chromium.org, nicolas@ndufresne.ca, Brian.Starkey@arm.com, kernel@collabora.com, narmstrong@baylibre.com, linux-kernel@vger.kernel.org, frkoenig@chromium.org, mjourdan@baylibre.com, stanimir.varbanov@linaro.org Subject: Re: [PATCH v5 3/7] media: videobuf2: Expose helpers to implement the _ext_fmt and _ext_buf hooks Message-ID: References: <20200804192939.2251988-1-helen.koike@collabora.com> <20200804192939.2251988-4-helen.koike@collabora.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20200804192939.2251988-4-helen.koike@collabora.com> Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Helen, On Tue, Aug 04, 2020 at 04:29:35PM -0300, Helen Koike wrote: > The VB2 layer is used by a lot of drivers. Patch it to support the > _EXT_PIX_FMT and _EXT_BUF ioctls in order to ease conversion of existing > drivers to these new APIs. > > Note that internally, the VB2 core is now only using ext structs and old > APIs are supported through conversion wrappers. We decided to only support V4L2_BUF_TYPE_VIDEO* for the ext structs. Still, existing drivers may use vb2 with the other, legacy, buf types. How would they be handled with this change? > > Signed-off-by: Boris Brezillon > Signed-off-by: Helen Koike > --- > Changes in v5: > - Update with new format and buffer structs > - Updated commit message with the uAPI prefix > > Changes in v4: > - Update with new format and buffer structs > - Fix some bugs caught by v4l2-compliance > - Rebased on top of media/master (post 5.8-rc1) > > Changes in v3: > - Rebased on top of media/master (post 5.4-rc1) > > Changes in v2: > - New patch > --- > .../media/common/videobuf2/videobuf2-core.c | 2 + > .../media/common/videobuf2/videobuf2-v4l2.c | 560 ++++++++++-------- > include/media/videobuf2-core.h | 6 +- > include/media/videobuf2-v4l2.h | 21 +- > 4 files changed, 345 insertions(+), 244 deletions(-) > > diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c > index f544d3393e9d6..d719b1e9c148b 100644 > --- a/drivers/media/common/videobuf2/videobuf2-core.c > +++ b/drivers/media/common/videobuf2/videobuf2-core.c > @@ -1270,6 +1270,7 @@ static int __prepare_dmabuf(struct vb2_buffer *vb) > vb->planes[plane].length = 0; > vb->planes[plane].m.fd = 0; > vb->planes[plane].data_offset = 0; > + vb->planes[plane].dbuf_offset = 0; > > /* Acquire each plane's memory */ > mem_priv = call_ptr_memop(vb, attach_dmabuf, > @@ -1313,6 +1314,7 @@ static int __prepare_dmabuf(struct vb2_buffer *vb) > vb->planes[plane].length = planes[plane].length; > vb->planes[plane].m.fd = planes[plane].m.fd; > vb->planes[plane].data_offset = planes[plane].data_offset; > + vb->planes[plane].dbuf_offset = planes[plane].dbuf_offset; > } > > if (reacquired) { > diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c b/drivers/media/common/videobuf2/videobuf2-v4l2.c > index 30caad27281e1..911681d24b3ae 100644 > --- a/drivers/media/common/videobuf2/videobuf2-v4l2.c > +++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c > @@ -29,6 +29,7 @@ > #include > #include > #include > +#include > > #include > > @@ -56,72 +57,39 @@ module_param(debug, int, 0644); > V4L2_BUF_FLAG_TIMECODE | \ > V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF) > > -/* > - * __verify_planes_array() - verify that the planes array passed in struct > - * v4l2_buffer from userspace can be safely used > - */ > -static int __verify_planes_array(struct vb2_buffer *vb, const struct v4l2_buffer *b) > -{ > - if (!V4L2_TYPE_IS_MULTIPLANAR(b->type)) > - return 0; > - > - /* Is memory for copying plane information present? */ > - if (b->m.planes == NULL) { > - dprintk(vb->vb2_queue, 1, > - "multi-planar buffer passed but planes array not provided\n"); > - return -EINVAL; > - } > - > - if (b->length < vb->num_planes || b->length > VB2_MAX_PLANES) { > - dprintk(vb->vb2_queue, 1, > - "incorrect planes array length, expected %d, got %d\n", > - vb->num_planes, b->length); > - return -EINVAL; > - } > - > - return 0; > -} > - > static int __verify_planes_array_core(struct vb2_buffer *vb, const void *pb) > { > - return __verify_planes_array(vb, pb); > + return 0; > } > > /* > * __verify_length() - Verify that the bytesused value for each plane fits in > * the plane length and that the data offset doesn't exceed the bytesused value. > */ > -static int __verify_length(struct vb2_buffer *vb, const struct v4l2_buffer *b) > +static int __verify_length(struct vb2_buffer *vb, > + const struct v4l2_ext_buffer *b) > { > unsigned int length; > unsigned int bytesused; > - unsigned int plane; > + unsigned int i; > > if (V4L2_TYPE_IS_CAPTURE(b->type)) > return 0; > > - if (V4L2_TYPE_IS_MULTIPLANAR(b->type)) { > - for (plane = 0; plane < vb->num_planes; ++plane) { > - length = (b->memory == VB2_MEMORY_USERPTR || > - b->memory == VB2_MEMORY_DMABUF) > - ? b->m.planes[plane].length > - : vb->planes[plane].length; > - bytesused = b->m.planes[plane].bytesused > - ? b->m.planes[plane].bytesused : length; > - > - if (b->m.planes[plane].bytesused > length) > - return -EINVAL; > - > - if (b->m.planes[plane].data_offset > 0 && > - b->m.planes[plane].data_offset >= bytesused) > - return -EINVAL; > - } > - } else { > - length = (b->memory == VB2_MEMORY_USERPTR || > - b->memory == VB2_MEMORY_DMABUF) > - ? b->length : vb->planes[0].length; > + for (i = 0; i < vb->num_planes; ++i) { > + const struct v4l2_ext_plane *plane = &b->planes[i]; > > - if (b->bytesused > length) > + length = (plane->memory == VB2_MEMORY_USERPTR || > + plane->memory == VB2_MEMORY_DMABUF) ? > + plane->buffer_length : > + vb->planes[i].length; > + bytesused = plane->plane_length ? > + plane->plane_length : length; > + > + if (bytesused > length) > + return -EINVAL; > + > + if (plane->offset + bytesused > length) > return -EINVAL; > } > > @@ -140,21 +108,12 @@ static void __init_vb2_v4l2_buffer(struct vb2_buffer *vb) > > static void __copy_timestamp(struct vb2_buffer *vb, const void *pb) > { > - const struct v4l2_buffer *b = pb; > - struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); > + const struct v4l2_ext_buffer *b = pb; > struct vb2_queue *q = vb->vb2_queue; > > - if (q->is_output) { > - /* > - * For output buffers copy the timestamp if needed, > - * and the timecode field and flag if needed. > - */ > - if (q->copy_timestamp) > - vb->timestamp = v4l2_buffer_get_timestamp(b); > - vbuf->flags |= b->flags & V4L2_BUF_FLAG_TIMECODE; > - if (b->flags & V4L2_BUF_FLAG_TIMECODE) > - vbuf->timecode = b->timecode; Is it okay to remove the timecode copying functionality? > - } > + /* For output buffers copy the timestamp if needed. */ > + if (q->is_output && q->copy_timestamp) > + vb->timestamp = b->timestamp; > }; > > static void vb2_warn_zero_bytesused(struct vb2_buffer *vb) > @@ -173,7 +132,8 @@ static void vb2_warn_zero_bytesused(struct vb2_buffer *vb) > pr_warn("use the actual size instead.\n"); > } > > -static int vb2_fill_vb2_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b) > +static int vb2_fill_vb2_v4l2_buffer(struct vb2_buffer *vb, > + struct v4l2_ext_buffer *b) > { > struct vb2_queue *q = vb->vb2_queue; > struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); > @@ -203,110 +163,67 @@ static int vb2_fill_vb2_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b > vbuf->request_fd = -1; > vbuf->is_held = false; > > - if (V4L2_TYPE_IS_MULTIPLANAR(b->type)) { > - switch (b->memory) { > - case VB2_MEMORY_USERPTR: > - for (plane = 0; plane < vb->num_planes; ++plane) { > - planes[plane].m.userptr = > - b->m.planes[plane].m.userptr; > - planes[plane].length = > - b->m.planes[plane].length; > - } > - break; > - case VB2_MEMORY_DMABUF: > - for (plane = 0; plane < vb->num_planes; ++plane) { > - planes[plane].m.fd = > - b->m.planes[plane].m.fd; > - planes[plane].length = > - b->m.planes[plane].length; > - } > - break; > - default: > - for (plane = 0; plane < vb->num_planes; ++plane) { > - planes[plane].m.offset = > - vb->planes[plane].m.offset; > - planes[plane].length = > - vb->planes[plane].length; > - } > - break; > + for (plane = 0; plane < vb->num_planes; ++plane) { > + if (b->planes[0].memory != b->planes[plane].memory) { > + dprintk(q, 1, "planes should have the same memory type\n"); > + return -EINVAL; > } > + } > > - /* Fill in driver-provided information for OUTPUT types */ > - if (V4L2_TYPE_IS_OUTPUT(b->type)) { > - /* > - * Will have to go up to b->length when API starts > - * accepting variable number of planes. > - * > - * If bytesused == 0 for the output buffer, then fall > - * back to the full buffer size. In that case > - * userspace clearly never bothered to set it and > - * it's a safe assumption that they really meant to > - * use the full plane sizes. > - * > - * Some drivers, e.g. old codec drivers, use bytesused == 0 > - * as a way to indicate that streaming is finished. > - * In that case, the driver should use the > - * allow_zero_bytesused flag to keep old userspace > - * applications working. > - */ > - for (plane = 0; plane < vb->num_planes; ++plane) { > - struct vb2_plane *pdst = &planes[plane]; > - struct v4l2_plane *psrc = &b->m.planes[plane]; > - > - if (psrc->bytesused == 0) > - vb2_warn_zero_bytesused(vb); > - > - if (vb->vb2_queue->allow_zero_bytesused) > - pdst->bytesused = psrc->bytesused; > - else > - pdst->bytesused = psrc->bytesused ? > - psrc->bytesused : pdst->length; > - pdst->data_offset = psrc->data_offset; > - } > + switch (b->planes[0].memory) { > + case VB2_MEMORY_USERPTR: > + for (plane = 0; plane < vb->num_planes; ++plane) { > + planes[plane].m.userptr = b->planes[plane].m.userptr; > + planes[plane].length = b->planes[plane].buffer_length; > } > - } else { > + break; > + case VB2_MEMORY_DMABUF: > + for (plane = 0; plane < vb->num_planes; ++plane) { > + planes[plane].m.fd = b->planes[plane].m.dmabuf_fd; > + planes[plane].dbuf_offset = b->planes[plane].offset; > + planes[plane].length = b->planes[plane].buffer_length; > + } > + break; > + default: > + for (plane = 0; plane < vb->num_planes; ++plane) { > + planes[plane].m.offset = vb->planes[plane].m.offset; > + planes[plane].length = vb->planes[plane].length; > + } > + break; > + } > + > + /* Fill in driver-provided information for OUTPUT types */ > + if (V4L2_TYPE_IS_OUTPUT(b->type)) { > /* > - * Single-planar buffers do not use planes array, > - * so fill in relevant v4l2_buffer struct fields instead. > - * In videobuf we use our internal V4l2_planes struct for > - * single-planar buffers as well, for simplicity. > + * Will have to go up to b->length when API starts > + * accepting variable number of planes. > * > - * If bytesused == 0 for the output buffer, then fall back > - * to the full buffer size as that's a sensible default. > + * If bytesused == 0 for the output buffer, then fall Should this be updated with the new field name? > + * back to the full buffer size. In that case > + * userspace clearly never bothered to set it and > + * it's a safe assumption that they really meant to > + * use the full plane sizes. > * > - * Some drivers, e.g. old codec drivers, use bytesused == 0 as > - * a way to indicate that streaming is finished. In that case, > - * the driver should use the allow_zero_bytesused flag to keep > - * old userspace applications working. > + * Some drivers, e.g. old codec drivers, use bytesused == 0 > + * as a way to indicate that streaming is finished. > + * In that case, the driver should use the > + * allow_zero_bytesused flag to keep old userspace > + * applications working. Do we retain this behavior in the new API? If no, I guess we need to check if this was old or new API and react appropriately. > */ > - switch (b->memory) { > - case VB2_MEMORY_USERPTR: > - planes[0].m.userptr = b->m.userptr; > - planes[0].length = b->length; > - break; > - case VB2_MEMORY_DMABUF: > - planes[0].m.fd = b->m.fd; > - planes[0].length = b->length; > - break; > - default: > - planes[0].m.offset = vb->planes[0].m.offset; > - planes[0].length = vb->planes[0].length; > - break; > - } > + for (plane = 0; plane < vb->num_planes; ++plane) { > + struct vb2_plane *pdst = &planes[plane]; > + struct v4l2_ext_plane *psrc = &b->planes[plane]; > > - planes[0].data_offset = 0; > - if (V4L2_TYPE_IS_OUTPUT(b->type)) { > - if (b->bytesused == 0) > + if (psrc->plane_length == 0) > vb2_warn_zero_bytesused(vb); > > if (vb->vb2_queue->allow_zero_bytesused) > - planes[0].bytesused = b->bytesused; > + pdst->bytesused = psrc->plane_length; > else > - planes[0].bytesused = b->bytesused ? > - b->bytesused : planes[0].length; > - } else > - planes[0].bytesused = 0; > - > + pdst->bytesused = psrc->plane_length ? > + psrc->plane_length : > + pdst->length; > + } > } > > /* Zero flags that we handle */ > @@ -343,7 +260,7 @@ static int vb2_fill_vb2_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b > > static void set_buffer_cache_hints(struct vb2_queue *q, > struct vb2_buffer *vb, > - struct v4l2_buffer *b) > + struct v4l2_ext_buffer *b) > { > /* > * DMA exporter should take care of cache syncs, so we can avoid > @@ -388,17 +305,44 @@ static void set_buffer_cache_hints(struct vb2_queue *q, > vb->need_cache_sync_on_prepare = 0; > } > > +static enum v4l2_buf_type vb2_ext_qtype(struct vb2_queue *q) > +{ > + if (!q->is_multiplanar) > + return q->type; Do we need this explicit check? Wouldn't the code below would return the right thing anyway? > + > + if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) > + return V4L2_BUF_TYPE_VIDEO_CAPTURE; > + else if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) > + return V4L2_BUF_TYPE_VIDEO_OUTPUT; > + > + return q->type; > +} > + > +static enum v4l2_buf_type vb2_ext_type(unsigned int type, bool is_multiplanar) > +{ > + if (!is_multiplanar) > + return type; Ditto. > + > + if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) > + return V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; > + else if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT) > + return V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; > + > + return type; > +} > + > static int vb2_queue_or_prepare_buf(struct vb2_queue *q, struct media_device *mdev, > - struct v4l2_buffer *b, bool is_prepare, > + struct v4l2_ext_buffer *b, bool is_prepare, > struct media_request **p_req) > { > const char *opname = is_prepare ? "prepare_buf" : "qbuf"; > struct media_request *req; > struct vb2_v4l2_buffer *vbuf; > struct vb2_buffer *vb; > + unsigned int i; > int ret; > > - if (b->type != q->type) { > + if (b->type != vb2_ext_qtype(q)) { > dprintk(q, 1, "%s: invalid buffer type\n", opname); > return -EINVAL; > } > @@ -414,16 +358,14 @@ static int vb2_queue_or_prepare_buf(struct vb2_queue *q, struct media_device *md > return -EINVAL; > } > > - if (b->memory != q->memory) { > + for (i = 0; i < VIDEO_MAX_PLANES && b->planes[i].buffer_length; i++) > + if (b->planes[i].memory != q->memory) { > dprintk(q, 1, "%s: invalid memory type\n", opname); > return -EINVAL; > } > > vb = q->bufs[b->index]; > vbuf = to_vb2_v4l2_buffer(vb); > - ret = __verify_planes_array(vb, b); > - if (ret) > - return ret; > > if (!is_prepare && (b->flags & V4L2_BUF_FLAG_REQUEST_FD) && > vb->state != VB2_BUF_STATE_DEQUEUED) { > @@ -487,11 +429,6 @@ static int vb2_queue_or_prepare_buf(struct vb2_queue *q, struct media_device *md > !q->ops->buf_out_validate)) > return -EINVAL; > > - if (b->request_fd < 0) { > - dprintk(q, 1, "%s: request_fd < 0\n", opname); > - return -EINVAL; > - } > - I guess this code was useless already, because the call below would validate the FD, but should it be perhaps removed in a separate patch? > req = media_request_get_by_fd(mdev, b->request_fd); > if (IS_ERR(req)) { > dprintk(q, 1, "%s: invalid request_fd\n", opname); > @@ -516,64 +453,46 @@ static int vb2_queue_or_prepare_buf(struct vb2_queue *q, struct media_device *md > } > > /* > - * __fill_v4l2_buffer() - fill in a struct v4l2_buffer with information to be > - * returned to userspace > + * __fill_v4l2_buffer() - fill in a struct v4l2_ext_buffer with information to > + * be returned to userspace > */ > static void __fill_v4l2_buffer(struct vb2_buffer *vb, void *pb) > { > - struct v4l2_buffer *b = pb; > + struct v4l2_ext_buffer *b = pb; > struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); > struct vb2_queue *q = vb->vb2_queue; > unsigned int plane; > > /* Copy back data such as timestamp, flags, etc. */ > b->index = vb->index; > - b->type = vb->type; > - b->memory = vb->memory; > - b->bytesused = 0; > + b->type = vb2_ext_qtype(q); > > b->flags = vbuf->flags; > b->field = vbuf->field; > - v4l2_buffer_set_timestamp(b, vb->timestamp); > - b->timecode = vbuf->timecode; > + b->timestamp = vb->timestamp; > b->sequence = vbuf->sequence; > - b->reserved2 = 0; > b->request_fd = 0; > + memset(b->reserved, 0, sizeof(b->reserved)); > > - if (q->is_multiplanar) { > - /* > - * Fill in plane-related data if userspace provided an array > - * for it. The caller has already verified memory and size. > - */ > - b->length = vb->num_planes; > - for (plane = 0; plane < vb->num_planes; ++plane) { > - struct v4l2_plane *pdst = &b->m.planes[plane]; > - struct vb2_plane *psrc = &vb->planes[plane]; > - > - pdst->bytesused = psrc->bytesused; > - pdst->length = psrc->length; > - if (q->memory == VB2_MEMORY_MMAP) > - pdst->m.mem_offset = psrc->m.offset; > - else if (q->memory == VB2_MEMORY_USERPTR) > - pdst->m.userptr = psrc->m.userptr; > - else if (q->memory == VB2_MEMORY_DMABUF) > - pdst->m.fd = psrc->m.fd; > - pdst->data_offset = psrc->data_offset; > - memset(pdst->reserved, 0, sizeof(pdst->reserved)); > - } > - } else { > - /* > - * We use length and offset in v4l2_planes array even for > - * single-planar buffers, but userspace does not. > - */ > - b->length = vb->planes[0].length; > - b->bytesused = vb->planes[0].bytesused; > + /* > + * Fill in plane-related data if userspace provided an array > + * for it. The caller has already verified memory and size. > + */ > + for (plane = 0; plane < vb->num_planes; ++plane) { > + struct v4l2_ext_plane *pdst = &b->planes[plane]; > + struct vb2_plane *psrc = &vb->planes[plane]; > + > + pdst->memory = vb->memory; > + pdst->plane_length = psrc->bytesused; > + pdst->buffer_length = psrc->length; > + pdst->offset = psrc->dbuf_offset; > if (q->memory == VB2_MEMORY_MMAP) > - b->m.offset = vb->planes[0].m.offset; > + pdst->m.mem_offset = psrc->m.offset; > else if (q->memory == VB2_MEMORY_USERPTR) > - b->m.userptr = vb->planes[0].m.userptr; > + pdst->m.userptr = psrc->m.userptr; > else if (q->memory == VB2_MEMORY_DMABUF) > - b->m.fd = vb->planes[0].m.fd; > + pdst->m.dmabuf_fd = psrc->m.fd; > + memset(pdst->reserved, 0, sizeof(pdst->reserved)); > } > > /* > @@ -668,6 +587,35 @@ int vb2_find_timestamp(const struct vb2_queue *q, u64 timestamp, > } > EXPORT_SYMBOL_GPL(vb2_find_timestamp); > > +#define vb2_buf_to_ext_buf_op(_name, ...) \ > +({ \ > + int ret; \ > + \ > + ret = v4l2_buffer_to_ext_buffer(b, &eb); \ > + if (!ret) \ > + ret = _name(__VA_ARGS__); \ > + if (!ret) \ > + ret = v4l2_ext_buffer_to_buffer(&eb, b, \ > + q->is_multiplanar); \ I'm not very happy with this macro implicitly relying on existence of some specific variables with predefined names in the scope of the caller. That said, I don't have a good idea on how this could be fixed, other than just repeating this code manually in each function. If we don't find anything better, I think at least a comment here explaining the assumptions would make it a bit better. > + ret; \ > +}) > + > +int vb2_ext_querybuf(struct vb2_queue *q, struct v4l2_ext_buffer *b) > +{ > + if (b->type != vb2_ext_qtype(q)) { > + dprintk(q, 1, "wrong buffer type\n"); > + return -EINVAL; > + } > + > + if (b->index >= q->num_buffers) { > + dprintk(q, 1, "buffer index out of range\n"); > + return -EINVAL; > + } > + vb2_core_querybuf(q, b->index, b); > + return 0; > +} > +EXPORT_SYMBOL(vb2_ext_querybuf); > + > /* > * vb2_querybuf() - query video buffer information > * @q: videobuf queue > @@ -683,23 +631,9 @@ EXPORT_SYMBOL_GPL(vb2_find_timestamp); > */ > int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b) > { > - struct vb2_buffer *vb; > - int ret; > - > - if (b->type != q->type) { > - dprintk(q, 1, "wrong buffer type\n"); > - return -EINVAL; > - } > + struct v4l2_ext_buffer eb; > > - if (b->index >= q->num_buffers) { > - dprintk(q, 1, "buffer index out of range\n"); > - return -EINVAL; > - } > - vb = q->bufs[b->index]; > - ret = __verify_planes_array(vb, b); > - if (!ret) > - vb2_core_querybuf(q, b->index, b); > - return ret; > + return vb2_buf_to_ext_buf_op(vb2_ext_querybuf, q, &eb); > } > EXPORT_SYMBOL(vb2_querybuf); > > @@ -741,8 +675,8 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req) > } > EXPORT_SYMBOL_GPL(vb2_reqbufs); > > -int vb2_prepare_buf(struct vb2_queue *q, struct media_device *mdev, > - struct v4l2_buffer *b) > +int vb2_ext_prepare_buf(struct vb2_queue *q, struct media_device *mdev, > + struct v4l2_ext_buffer *b) > { > int ret; > > @@ -758,16 +692,59 @@ int vb2_prepare_buf(struct vb2_queue *q, struct media_device *mdev, > > return ret ? ret : vb2_core_prepare_buf(q, b->index, b); > } > +EXPORT_SYMBOL_GPL(vb2_ext_prepare_buf); > + > +int vb2_prepare_buf(struct vb2_queue *q, struct media_device *mdev, > + struct v4l2_buffer *b) > +{ > + struct v4l2_ext_buffer eb; > + > + return vb2_buf_to_ext_buf_op(vb2_ext_prepare_buf, q, mdev, &eb); > +} > EXPORT_SYMBOL_GPL(vb2_prepare_buf); > > +int vb2_ext_create_bufs(struct vb2_queue *q, > + struct v4l2_ext_create_buffers *create) > +{ > + unsigned int requested_sizes[VIDEO_MAX_PLANES]; > + struct v4l2_ext_pix_format *f = &create->format; > + int ret = vb2_verify_memory_type(q, create->memory, > + vb2_ext_type(f->type, q->is_multiplanar)); > + unsigned i; > + > + if (create->format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE && > + create->format.type != V4L2_BUF_TYPE_VIDEO_OUTPUT) > + return -EINVAL; > + > + fill_buf_caps(q, &create->capabilities); > + clear_consistency_attr(q, create->memory, &create->flags); > + create->index = q->num_buffers; > + if (create->count == 0) > + return ret != -EBUSY ? ret : 0; > + > + if (!f->plane_fmt[0].sizeimage) > + return -EINVAL; > + for (i = 0; i < VIDEO_MAX_PLANES && > + f->plane_fmt[i].sizeimage; i++) > + requested_sizes[i] = f->plane_fmt[i].sizeimage; > + > + return ret ? ret : vb2_core_create_bufs(q, create->memory, > + create->flags, > + &create->count, > + i, > + requested_sizes); > +} > +EXPORT_SYMBOL_GPL(vb2_ext_create_bufs); > + > int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create) > { > + struct v4l2_format *f = &create->format; > unsigned requested_planes = 1; > unsigned requested_sizes[VIDEO_MAX_PLANES]; > - struct v4l2_format *f = &create->format; > int ret = vb2_verify_memory_type(q, create->memory, f->type); > unsigned i; > > + > fill_buf_caps(q, &create->capabilities); > clear_consistency_attr(q, create->memory, &create->flags); > create->index = q->num_buffers; > @@ -777,18 +754,29 @@ int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create) > switch (f->type) { > case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: > case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: > - requested_planes = f->fmt.pix_mp.num_planes; > - if (requested_planes == 0 || > - requested_planes > VIDEO_MAX_PLANES) > - return -EINVAL; > - for (i = 0; i < requested_planes; i++) > - requested_sizes[i] = > - f->fmt.pix_mp.plane_fmt[i].sizeimage; > - break; > case V4L2_BUF_TYPE_VIDEO_CAPTURE: > - case V4L2_BUF_TYPE_VIDEO_OUTPUT: > - requested_sizes[0] = f->fmt.pix.sizeimage; > - break; > + case V4L2_BUF_TYPE_VIDEO_OUTPUT: { > + struct v4l2_ext_create_buffers ecreate = { > + .count = create->count, > + .memory = create->memory, > + .flags = create->flags, > + }; > + > + ret = v4l2_format_to_ext_pix_format(&create->format, > + &ecreate.format, true); > + if (ret) > + return ret; > + > + ret = vb2_ext_create_bufs(q, &ecreate); > + if (ret) > + return ret; > + > + create->index = ecreate.index; > + create->count = ecreate.count; > + create->flags = ecreate.flags; > + create->capabilities = ecreate.capabilities; > + return 0; > + } > case V4L2_BUF_TYPE_VBI_CAPTURE: > case V4L2_BUF_TYPE_VBI_OUTPUT: > requested_sizes[0] = f->fmt.vbi.samples_per_line * > @@ -820,8 +808,8 @@ int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create) > } > EXPORT_SYMBOL_GPL(vb2_create_bufs); > > -int vb2_qbuf(struct vb2_queue *q, struct media_device *mdev, > - struct v4l2_buffer *b) > +int vb2_ext_qbuf(struct vb2_queue *q, struct media_device *mdev, > + struct v4l2_ext_buffer *b) > { > struct media_request *req = NULL; > int ret; > @@ -839,9 +827,19 @@ int vb2_qbuf(struct vb2_queue *q, struct media_device *mdev, > media_request_put(req); > return ret; > } > +EXPORT_SYMBOL_GPL(vb2_ext_qbuf); > + > +int vb2_qbuf(struct vb2_queue *q, struct media_device *mdev, > + struct v4l2_buffer *b) > +{ > + struct v4l2_ext_buffer eb; > + > + return vb2_buf_to_ext_buf_op(vb2_ext_qbuf, q, mdev, &eb); > +} > EXPORT_SYMBOL_GPL(vb2_qbuf); > > -int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking) > +int vb2_ext_dqbuf(struct vb2_queue *q, struct v4l2_ext_buffer *b, > + bool nonblocking) > { > int ret; > > @@ -850,7 +848,7 @@ int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking) > return -EBUSY; > } > > - if (b->type != q->type) { > + if (b->type != vb2_ext_qtype(q)) { > dprintk(q, 1, "invalid buffer type\n"); > return -EINVAL; > } > @@ -870,6 +868,14 @@ int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking) > > return ret; > } > +EXPORT_SYMBOL_GPL(vb2_ext_dqbuf); > + > +int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking) > +{ > + struct v4l2_ext_buffer eb; > + > + return vb2_buf_to_ext_buf_op(vb2_ext_dqbuf, q, &eb, nonblocking); > +} > EXPORT_SYMBOL_GPL(vb2_dqbuf); > > int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type) > @@ -1040,6 +1046,33 @@ int vb2_ioctl_create_bufs(struct file *file, void *priv, > } > EXPORT_SYMBOL_GPL(vb2_ioctl_create_bufs); > > +int vb2_ioctl_ext_create_bufs(struct file *file, void *priv, > + struct v4l2_ext_create_buffers *p) > +{ > + struct video_device *vdev = video_devdata(file); > + int res = vb2_verify_memory_type(vdev->queue, p->memory, > + vb2_ext_type(p->format.type, vdev->queue->is_multiplanar)); > + > + p->index = vdev->queue->num_buffers; > + fill_buf_caps(vdev->queue, &p->capabilities); > + /* > + * If count == 0, then just check if memory and type are valid. > + * Any -EBUSY result from vb2_verify_memory_type can be mapped to 0. > + */ > + if (p->count == 0) > + return res != -EBUSY ? res : 0; > + if (res) > + return res; > + if (vb2_queue_is_busy(vdev, file)) > + return -EBUSY; > + > + res = vb2_ext_create_bufs(vdev->queue, p); > + if (res == 0) > + vdev->queue->owner = file->private_data; > + return res; > +} > +EXPORT_SYMBOL_GPL(vb2_ioctl_ext_create_bufs); > + > int vb2_ioctl_prepare_buf(struct file *file, void *priv, > struct v4l2_buffer *p) > { > @@ -1051,6 +1084,17 @@ int vb2_ioctl_prepare_buf(struct file *file, void *priv, > } > EXPORT_SYMBOL_GPL(vb2_ioctl_prepare_buf); > > +int vb2_ioctl_ext_prepare_buf(struct file *file, void *priv, > + struct v4l2_ext_buffer *p) > +{ > + struct video_device *vdev = video_devdata(file); > + > + if (vb2_queue_is_busy(vdev, file)) > + return -EBUSY; > + return vb2_ext_prepare_buf(vdev->queue, vdev->v4l2_dev->mdev, p); > +} > +EXPORT_SYMBOL_GPL(vb2_ioctl_ext_prepare_buf); > + > int vb2_ioctl_querybuf(struct file *file, void *priv, struct v4l2_buffer *p) > { > struct video_device *vdev = video_devdata(file); > @@ -1060,6 +1104,16 @@ int vb2_ioctl_querybuf(struct file *file, void *priv, struct v4l2_buffer *p) > } > EXPORT_SYMBOL_GPL(vb2_ioctl_querybuf); > > +int vb2_ioctl_ext_querybuf(struct file *file, void *priv, > + struct v4l2_ext_buffer *p) > +{ > + struct video_device *vdev = video_devdata(file); > + > + /* No need to call vb2_queue_is_busy(), anyone can query buffers. */ > + return vb2_ext_querybuf(vdev->queue, p); > +} > +EXPORT_SYMBOL_GPL(vb2_ioctl_ext_querybuf); > + > int vb2_ioctl_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) > { > struct video_device *vdev = video_devdata(file); > @@ -1070,6 +1124,17 @@ int vb2_ioctl_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) > } > EXPORT_SYMBOL_GPL(vb2_ioctl_qbuf); > > +int vb2_ioctl_ext_qbuf(struct file *file, void *priv, > + struct v4l2_ext_buffer *p) > +{ > + struct video_device *vdev = video_devdata(file); > + > + if (vb2_queue_is_busy(vdev, file)) > + return -EBUSY; > + return vb2_ext_qbuf(vdev->queue, vdev->v4l2_dev->mdev, p); > +} > +EXPORT_SYMBOL_GPL(vb2_ioctl_ext_qbuf); > + > int vb2_ioctl_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) > { > struct video_device *vdev = video_devdata(file); > @@ -1080,6 +1145,17 @@ int vb2_ioctl_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) > } > EXPORT_SYMBOL_GPL(vb2_ioctl_dqbuf); > > +int vb2_ioctl_ext_dqbuf(struct file *file, void *priv, > + struct v4l2_ext_buffer *p) > +{ > + struct video_device *vdev = video_devdata(file); > + > + if (vb2_queue_is_busy(vdev, file)) > + return -EBUSY; > + return vb2_ext_dqbuf(vdev->queue, p, file->f_flags & O_NONBLOCK); > +} > +EXPORT_SYMBOL_GPL(vb2_ioctl_ext_dqbuf); > + > int vb2_ioctl_streamon(struct file *file, void *priv, enum v4l2_buf_type i) > { > struct video_device *vdev = video_devdata(file); > diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h > index 52ef92049073e..f334767785bd9 100644 > --- a/include/media/videobuf2-core.h > +++ b/include/media/videobuf2-core.h > @@ -152,6 +152,8 @@ struct vb2_mem_ops { > * @mem_priv: private data with this plane. > * @dbuf: dma_buf - shared buffer object. > * @dbuf_mapped: flag to show whether dbuf is mapped or not > + * @dbuf_offset: offset where the plane starts. Usually 0, unless the buffer > + * is shared by all planes of a multi-planar format. The comment kind of implies that non-zero is a special case, but I wouldn't want driver authors to come to incorrect conclusions based on that. Do we actually need the last sentence at all? > * @bytesused: number of bytes occupied by data in the plane (payload). > * @length: size of this plane (NOT the payload) in bytes. > * @min_length: minimum required size of this plane (NOT the payload) in bytes. > @@ -175,6 +177,7 @@ struct vb2_plane { > void *mem_priv; > struct dma_buf *dbuf; > unsigned int dbuf_mapped; > + unsigned int dbuf_offset; > unsigned int bytesused; > unsigned int length; > unsigned int min_length; > @@ -446,7 +449,8 @@ struct vb2_ops { > * struct vb2_buffer. > * For V4L2 this is a &struct vb2_v4l2_buffer. > * @fill_user_buffer: given a &vb2_buffer fill in the userspace structure. > - * For V4L2 this is a &struct v4l2_buffer. > + * For V4L2 this is a &struct v4l2_buffer or > + * &struct v4l2_ext_buffer. Isn't it always v4l2_ext_buffer with current code? Best regards, Tomasz