linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Xu <peterx@redhat.com>
To: David Stevens <stevensd@chromium.org>
Cc: linux-mm@kvack.org, Matthew Wilcox <willy@infradead.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	"Kirill A . Shutemov" <kirill@shutemov.name>,
	Yang Shi <shy828301@gmail.com>,
	David Hildenbrand <david@redhat.com>,
	Hugh Dickins <hughd@google.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] mm/khugepaged: skip shmem with userfaultfd
Date: Thu, 16 Feb 2023 09:41:22 -0500	[thread overview]
Message-ID: <Y+5Akpz4CvGywt6R@x1n> (raw)
In-Reply-To: <CAD=HUj69L2e-Z4TB19qFt8h1cn0r1oGbWovJGMOjjyvfDcQ7NA@mail.gmail.com>

On Thu, Feb 16, 2023 at 10:37:47AM +0900, David Stevens wrote:
> On Thu, Feb 16, 2023 at 7:48 AM Peter Xu <peterx@redhat.com> wrote:
> >
> > On Tue, Feb 14, 2023 at 04:57:10PM +0900, David Stevens wrote:
> > > From: David Stevens <stevensd@chromium.org>
> > >
> > > Make sure that collapse_file respects any userfaultfds registered with
> > > MODE_MISSING. If userspace has any such userfaultfds registered, then
> > > for any page which it knows to be missing, it may expect a
> > > UFFD_EVENT_PAGEFAULT. This means collapse_file needs to take care when
> > > collapsing a shmem range would result in replacing an empty page with a
> > > THP, so that it doesn't break userfaultfd.
> > >
> > > Synchronization when checking for userfaultfds in collapse_file is
> > > tricky because the mmap locks can't be used to prevent races with the
> > > registration of new userfaultfds. Instead, we provide synchronization by
> > > ensuring that userspace cannot observe the fact that pages are missing
> > > before we check for userfaultfds. Although this allows registration of a
> > > userfaultfd to race with collapse_file, it ensures that userspace cannot
> > > observe any pages transition from missing to present after such a race.
> > > This makes such a race indistinguishable to the collapse occurring
> > > immediately before the userfaultfd registration.
> > >
> > > The first step to provide this synchronization is to stop filling gaps
> > > during the loop iterating over the target range, since the page cache
> > > lock can be dropped during that loop. The second step is to fill the
> > > gaps with XA_RETRY_ENTRY after the page cache lock is acquired the final
> > > time, to avoid races with accesses to the page cache that only take the
> > > RCU read lock.
> > >
> > > This fix is targeted at khugepaged, but the change also applies to
> > > MADV_COLLAPSE. MADV_COLLAPSE on a range with a userfaultfd will now
> > > return EBUSY if there are any missing pages (instead of succeeding on
> > > shmem and returning EINVAL on anonymous memory). There is also now a
> > > window during MADV_COLLAPSE where a fault on a missing page will cause
> > > the syscall to fail with EAGAIN.
> > >
> > > The fact that intermediate page cache state can no longer be observed
> > > before the rollback of a failed collapse is also technically a
> > > userspace-visible change (via at least SEEK_DATA and SEEK_END), but it
> > > is exceedingly unlikely that anything relies on being able to observe
> > > that transient state.
> > >
> > > Signed-off-by: David Stevens <stevensd@chromium.org>
> > > ---
> > >  mm/khugepaged.c | 66 +++++++++++++++++++++++++++++++++++++++++++------
> > >  1 file changed, 58 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/mm/khugepaged.c b/mm/khugepaged.c
> > > index b648f1053d95..8c2e2349e883 100644
> > > --- a/mm/khugepaged.c
> > > +++ b/mm/khugepaged.c
> > > @@ -55,6 +55,7 @@ enum scan_result {
> > >       SCAN_CGROUP_CHARGE_FAIL,
> > >       SCAN_TRUNCATED,
> > >       SCAN_PAGE_HAS_PRIVATE,
> > > +     SCAN_PAGE_FILLED,
> >
> > PS: You may want to also touch SCAN_STATUS in huge_memory.h next time.
> >
> > >  };
> > >
> > >  #define CREATE_TRACE_POINTS
> > > @@ -1725,8 +1726,8 @@ static int retract_page_tables(struct address_space *mapping, pgoff_t pgoff,
> > >   *  - allocate and lock a new huge page;
> > >   *  - scan page cache replacing old pages with the new one
> > >   *    + swap/gup in pages if necessary;
> > > - *    + fill in gaps;
> >
> > IIUC it's not a complete removal, but just moved downwards:
> >
> > >   *    + keep old pages around in case rollback is required;
> > > + *  - finalize updates to the page cache;
> >
> >          + fill in gaps with RETRY entries
> >          + detect race conditions with userfaultfds
> >
> > >   *  - if replacing succeeds:
> > >   *    + copy data over;
> > >   *    + free old pages;
> > > @@ -1805,13 +1806,12 @@ static int collapse_file(struct mm_struct *mm, unsigned long addr,
> > >                                               result = SCAN_TRUNCATED;
> > >                                               goto xa_locked;
> > >                                       }
> > > -                                     xas_set(&xas, index);
> > > +                                     xas_set(&xas, index + 1);
> > >                               }
> > >                               if (!shmem_charge(mapping->host, 1)) {
> > >                                       result = SCAN_FAIL;
> > >                                       goto xa_locked;
> > >                               }
> > > -                             xas_store(&xas, hpage);
> > >                               nr_none++;
> > >                               continue;
> > >                       }
> > > @@ -1970,6 +1970,56 @@ static int collapse_file(struct mm_struct *mm, unsigned long addr,
> > >               put_page(page);
> > >               goto xa_unlocked;
> > >       }
> > > +
> > > +     if (nr_none) {
> > > +             struct vm_area_struct *vma;
> > > +             int nr_none_check = 0;
> > > +
> > > +             xas_unlock_irq(&xas);
> > > +             i_mmap_lock_read(mapping);
> > > +             xas_lock_irq(&xas);
> > > +
> > > +             xas_set(&xas, start);
> > > +             for (index = start; index < end; index++) {
> > > +                     if (!xas_next(&xas)) {
> > > +                             xas_store(&xas, XA_RETRY_ENTRY);
> > > +                             nr_none_check++;
> > > +                     }
> > > +             }
> > > +
> > > +             if (nr_none != nr_none_check) {
> > > +                     result = SCAN_PAGE_FILLED;
> > > +                     goto immap_locked;
> > > +             }
> > > +
> > > +             /*
> > > +              * If userspace observed a missing page in a VMA with an armed
> > > +              * userfaultfd, then it might expect a UFFD_EVENT_PAGEFAULT for
> > > +              * that page, so we need to roll back to avoid suppressing such
> > > +              * an event. Any userfaultfds armed after this point will not be
> > > +              * able to observe any missing pages due to the previously
> > > +              * inserted retry entries.
> > > +              */
> > > +             vma_interval_tree_foreach(vma, &mapping->i_mmap, start, start) {
> > > +                     if (userfaultfd_missing(vma)) {
> > > +                             result = SCAN_EXCEED_NONE_PTE;
> > > +                             goto immap_locked;
> > > +                     }
> > > +             }
> > > +
> > > +immap_locked:
> > > +             i_mmap_unlock_read(mapping);
> > > +             if (result != SCAN_SUCCEED) {
> > > +                     xas_set(&xas, start);
> > > +                     for (index = start; index < end; index++) {
> > > +                             if (xas_next(&xas) == XA_RETRY_ENTRY)
> > > +                                     xas_store(&xas, NULL);
> > > +                     }
> > > +
> > > +                     goto xa_locked;
> > > +             }
> > > +     }
> > > +
> >
> > Until here, all look fine to me (ignoring patch 1 for now; assuming the
> > hpage is always uptodate).
> >
> > My question is after here we'll release page cache lock again before
> > try_to_unmap_flush(), but is it safe to keep RETRY entries after releasing
> > page cache lock?  It means other threads can be spinning.  I assume page
> > lock is always safe and sleepable, but not sure about the page cache lock
> > here.
> 
> We insert the multi-index entry for hpage before releasing the page
> cache lock, which should replace all of the XA_RETRY_ENTRYs. So the
> page cache will be fully up to date when we release the lock, at least
> in terms of which pages it contains.

IIUC we released it before copying the pages:

xa_locked:
	xas_unlock_irq(&xas);  <-------------------------------- here
xa_unlocked:

	/*
	 * If collapse is successful, flush must be done now before copying.
	 * If collapse is unsuccessful, does flush actually need to be done?
	 * Do it anyway, to clear the state.
	 */
	try_to_unmap_flush();

Before insertion of the multi-index:

        /* Join all the small entries into a single multi-index entry. */
        xas_set_order(&xas, start, HPAGE_PMD_ORDER);
        xas_store(&xas, hpage);

Thanks,

-- 
Peter Xu


  reply	other threads:[~2023-02-16 14:42 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-14  7:57 [PATCH 1/2] mm/khugepaged: set THP as uptodate earlier for shmem David Stevens
2023-02-14  7:57 ` [PATCH 2/2] mm/khugepaged: skip shmem with userfaultfd David Stevens
2023-02-14 22:35   ` Peter Xu
2023-02-15  1:57     ` David Stevens
2023-02-15 22:27       ` Peter Xu
2023-02-15 22:48   ` Peter Xu
2023-02-16  1:37     ` David Stevens
2023-02-16 14:41       ` Peter Xu [this message]
2023-02-16 21:58         ` Yang Shi
2023-02-16 23:07           ` Peter Xu
2023-02-16 23:52             ` Yang Shi
2023-02-17  2:00         ` David Stevens
2023-02-17  3:20           ` Yang Shi
2023-02-14 15:44 ` [PATCH 1/2] mm/khugepaged: set THP as uptodate earlier for shmem Matthew Wilcox
2023-02-15  1:33   ` David Stevens
2023-02-15 22:05     ` Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Y+5Akpz4CvGywt6R@x1n \
    --to=peterx@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=david@redhat.com \
    --cc=hughd@google.com \
    --cc=kirill@shutemov.name \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=shy828301@gmail.com \
    --cc=stevensd@chromium.org \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).