From: Greg KH <gregkh@linuxfoundation.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [GIT PULL] USB/Thunderbolt driver changes for 6.2-rc1
Date: Fri, 16 Dec 2022 09:43:40 +0100 [thread overview]
Message-ID: <Y5wvvK08gUxb7feH@kroah.com> (raw)
The following changes since commit b7b275e60bcd5f89771e865a8239325f86d9927d:
Linux 6.1-rc7 (2022-11-27 13:31:48 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git tags/usb-6.2-rc1
for you to fetch changes up to 81c25247a2a03a0f97e4805d7aff7541ccff6baa:
usb: gadget: uvc: Rename bmInterfaceFlags -> bmInterlaceFlags (2022-12-08 16:53:47 +0100)
----------------------------------------------------------------
USB/Thunderbolt driver changes for 6.2-rc1
Here is the large set of USB and Thunderbolt driver changes for 6.2-rc1.
Overall, thanks to the removal of a driver, more lines were removed than
added, a nice change. Highlights include:
- removal of the sisusbvga driver that was not used by anyone anymore
- minor thunderbolt driver changes and tweaks
- chipidea driver updates
- usual set of typec driver features and hardware support added
- musb minor driver fixes
- fotg210 driver fixes, bringing that hardware back from the "dead"
- minor dwc3 driver updates
- addition, and then removal, of a list.h helper function for many USB
and other subsystem drivers, that ended up breaking the build. That
will come back for 6.3-rc1, it missed this merge window.
- usual xhci updates and enhancements
- usb-serial driver updates and support for new devices
- other minor USB driver updates
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Abel Vesa (1):
dt-bindings: usb: dwc3: Add SM8550 compatible
Alan Stern (1):
USB: core: Change configuration warnings to notices
Allen-KH Cheng (1):
dt-bindings: usb: mtu3: add compatible for mt8186
Andrzej Pietrasiewicz (1):
usb: gadget: function: Simplify diagnostic messaging in printer
Andy Shevchenko (5):
thunderbolt: Use str_enabled_disabled() helper
i915: Move list_count() to list.h for broader use
usb: gadget: hid: Convert to use list_count()
usb: gadget: udc: bcm63xx: Convert to use list_count()
xhci: Convert to use list_count()
Arnd Bergmann (1):
usb: musb: remove unused davinci support
Bhupesh Sharma (1):
tools: usb: ffs-aio-example: Fix build error with aarch64-*-gnu-gcc toolchain(s)
Brian Norris (2):
usb: ehci-pci: Set PROBE_PREFER_ASYNCHRONOUS
usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS
Bruno Thomsen (1):
USB: serial: cp210x: add Kamstrup RF sniffer PIDs
Christophe JAILLET (3):
usb: core: Use kstrtobool() instead of strtobool()
usb: gadget: Use kstrtobool() instead of strtobool()
usb: fotg210-udc: Remove a useless assignment
Christophe Leroy (1):
usb: Check !irq instead of irq == NO_IRQ
Chunfeng Yun (2):
usb: host: xhci-mtk: omit shared hcd if either root hub has no ports
usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irq
Colin Ian King (4):
usb: ftdi-elan: remove variable err_count
USB: host: Kconfig: Fix spelling mistake "firwmare" -> "firmware"
thunderbolt: Remove redundant assignment to variable len
usb: ftdi-elan: remove variable l
Daniel Scally (1):
usb: gadget: uvc: Rename bmInterfaceFlags -> bmInterlaceFlags
Dongliang Mu (1):
usb: cdns3: adjust the partial logic of cdnsp_pci_remove
Duke Xin (1):
USB: serial: option: add Quectel EM05-G modem
Ferry Toth (2):
usb: ulpi: defer ulpi_register on ulpi_read_id timeout
usb: dwc3: core: defer probe on ulpi_read_id timeout
Frank Wunderlich (1):
dt-bindings: usb: mtk-xhci: add support for mt7986
Geert Uytterhoeven (1):
usb: USB_FOTG210 should depend on ARCH_GEMINI
Greg Kroah-Hartman (10):
Merge 6.1-rc3 into usb-next
Merge 6.1-rc6 into usb-next
Merge 6.1-rc7 into usb-next
Merge tag 'thunderbolt-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Revert "xhci: Convert to use list_count()"
Revert "usb: gadget: udc: bcm63xx: Convert to use list_count()"
Revert "usb: gadget: hid: Convert to use list_count()"
Revert "i915: Move list_count() to list.h for broader use"
Merge tag 'usb-serial-6.1-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Merge tag 'usb-serial-6.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Heikki Krogerus (3):
usb: typec: retimer: Use device type for matching
thunderbolt: ACPI: Use the helper fwnode_find_reference()
usb: typec: ucsi: Resume in separate work
Henry Tian (1):
usb: gadget: aspeed: fix buffer overflow
Icenowy Zheng (3):
dt-bindings: vendor-prefixes: add Genesys Logic
dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller
usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support
Ivaylo Dimitrov (1):
usb: musb: remove extra check in musb_gadget_vbus_draw
Jean Delvare (2):
usb: misc: onboard_usb_hub: Drop obsolete dependency on COMPILE_TEST
usb: gadget: udc: drop obsolete dependencies on COMPILE_TEST
Jiantao Zhang (1):
USB: gadget: Fix use-after-free during usb config switch
Jiasheng Jiang (1):
usb: storage: Add check for kcalloc
Jiri Slaby (SUSE) (3):
USB: sisusbvga: remove console support
USB: sisusbvga: rename sisusb.c to sisusbvga.c
USB: sisusbvga: use module_usb_driver()
Johan Hovold (4):
USB: serial: cp210x: add support for B0 hangup
USB: serial: f81232: fix division by zero on line-speed change
USB: serial: f81534: fix division by zero on line-speed change
USB: serial: xr: avoid requesting zero DTE rate
John Keeping (3):
usb: gadget: f_hid: fix f_hidg lifetime vs cdev
usb: gadget: f_hid: fix refcount leak on error path
usb: gadget: f_hid: tidy error handling in hidg_alloc
Jonathan Neuschäfer (1):
usb: chipidea: ci_hdrc_imx: Fix a typo ("regualator")
Jose Ignacio Tornos Martinez (1):
USB: usbip: missing lock in stub down
Jules Irenge (1):
usbip: vudc: Convert snprintf() to sysfs_emit()
Li Jun (6):
usb: chipidea: usbmisc: group usbmisc operations for PM
usb: chipidea: usbmisc: add power lost check for imx6sx
usb: chipidea: usbmisc: add power lost check for imx7d
usb: chipidea: usbmisc: add power lost check for imx7ulp
dt-bindings: usb: usb-nop-xceiv: add wakeup-source property
usb: phy: generic: Add wakeup capability
Linus Walleij (12):
dt-bindings: usb: dwc2: Add some missing Lantiq variants
usb: phy: phy-gpio-vbus-usb: Add device tree probing
usb: fotg210: Collect pieces of dual mode controller
usb: fotg210: Compile into one module
usb: fotg210: Select subdriver by mode
usb: fotg2: add Gemini-specific handling
usb: fotg210-udc: Fix ages old endianness issues
usb: fotg210: Fix Kconfig for USB host modules
fotg210-udc: Use dev pointer in probe and dev_messages
fotg210-udc: Support optional external PHY
fotg210-udc: Handle PCLK
fotg210-udc: Get IRQ using platform_get_irq()
Longfang Liu (1):
xhci: print warning when HCE was set
Lukas Bulwahn (3):
usb: musb: remove left-over after USB_TI_CPPI_DMA removal
MAINTAINERS: rectify entry for MICROCHIP USB251XB DRIVER
usb: dwc3: improve the config dependency of USB_DWC3_XILINX
Marek Vasut (2):
dt-bindings: usb: usb251xb: Convert to YAML schema
extcon: usbc-tusb320: Update state on probe even if no IRQ pending
Mathias Nyman (4):
xhci: export two xhci_hub functions for xhci-pci module usage
xhci: disable U3 suspended ports in S4 hibernate poweroff_late stage
xhci: Prevent infinite loop in transaction errors recovery for streams
xhci: remove unused stream_id parameter from xhci_handle_halted_endpoint()
Miaoqian Lin (1):
usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init
Michael Grzeschik (2):
usb: gadget: uvc: default the ctrl request interface offsets
usb: gadget: at91-udc: simplify at91rm9200_udc_pullup callback
Paul Cercueil (7):
usb: musb: Add and use inline functions musb_{get,set}_state
usb: musb: Add and use inline function musb_otg_state_string
usb: musb: Allow running without CONFIG_USB_PHY
usb: musb: Support setting OTG mode using generic PHY
usb: musb: jz4740: Don't disable external hubs
usb: musb: jz4740: Support the generic PHY framework
usb: phy: jz4770: Remove driver
Pawel Laszczak (1):
usb: cdnsp: fix lack of ZLP for ep0
Peng Fan (1):
dt-bindings: phy: imx8mq-usb: add power-domains property
Prashant Malani (2):
usb: typec: Add partner PD object wrapper
platform/chrome: cros_ec_typec: Set parent of partner PD object
Quentin Schulz (2):
usb: dwc2: disable lpm feature on Rockchip SoCs
usb: dwc2: power on/off phy for peripheral mode in dual-role mode
Rajat Khandelwal (1):
thunderbolt: Add wake on connect/disconnect on USB4 ports
Ray Chi (1):
usb: core: stop USB enumeration if too many retries
Reka Norman (1):
xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-N
Sascha Hauer (3):
usb: phy: generic: make vcc regulator optional
usb: gadget: u_ether: Do not make UDC parent of the net device
usb: gadget: f_ecm: Always set current gadget in ecm_bind()
Shruthi Sanil (1):
usb: dwc3: pci: Update PCIe device ID for USB3 controller on CPU sub-system for Raptor Lake
Shuah Khan (1):
usb/usbip: Fix v_recv_cmd_submit() to use PIPE_BULK define
Sven Peter (7):
usb: typec: Check for ops->exit instead of ops->enter in altmode_exit
usb: typec: tipd: Cleanup resources if devm_tps6598_psy_register fails
usb: typec: tipd: Fix spurious fwnode_handle_put in error path
usb: typec: tipd: Fix typec_unregister_port error paths
usb: typec: tipd: Move tps6598x_disconnect error path to its own label
usb: dwc3: Fix race between dwc3_set_mode and __dwc3_set_mode
usb: typec: tipd: Set mode of operation for USB Type-C connector
Szymon Heidrich (1):
usb: gadget: uvc: Prevent buffer overflow in setup handler
Thierry Reding (1):
dt-bindings: usb: usb-drd: Describe default dual-role mode
Thinh Nguyen (1):
usb: dwc3: gadget: Reduce TRB IOC settings
Tony Lindgren (2):
usb: musb: omap2430: Fix probe regression for missing resources
usb: musb: Drop old unused am35x glue layer
Uwe Kleine-König (14):
usb: dwc2: platform: Improve error reporting for problems during .remove()
usb: typec: ucsi: stm32g0: Convert to i2c's .probe_new()
usb: typec: ucsi/ucsi_ccg: Convert to i2c's .probe_new()
usb: typec: tcpm/tcpci_rt1711h: Convert to i2c's .probe_new()
usb: typec: tcpm/tcpci_maxim: Convert to i2c's .probe_new()
usb: typec: tcpm/tcpci: Convert to i2c's .probe_new()
usb: typec: tcpm/fusb302: Convert to i2c's .probe_new()
usb: typec: hd3ss3220: Convert to i2c's .probe_new()
usb: typec: anx7411: Convert to i2c's .probe_new()
usb: phy: isp1301: Convert to i2c's .probe_new()
usb: isp1301-omap: Convert to i2c's .probe_new()
usb: usb4604: Convert to i2c's .probe_new()
usb: misc: usb3503: Convert to i2c's .probe_new()
usb: usb251xb: Convert to i2c's .probe_new()
Vincent Mailhol (1):
usb: add usb_set_intfdata() documentation
Xu Yang (7):
usb: chipidea: core: handle usb role switch in a common way
usb: chipidea: core: add controller resume support when controller is powered off
usb: chipidea: core: handle suspend/resume for each role
usb: chipidea: host: add suspend/resume support for host controller
usb: chipidea: udc: add suspend/resume support for device controller
usb: chipidea: core: wrap ci_handle_power_lost() with CONFIG_PM_SLEEP
usb: host: fix a typo in ehci.h
Xuezhi Zhang (1):
usbip: convert sysfs snprintf to sysfs_emit
Yang Yingliang (5):
Documentation: devres: add missing PHY helpers
usb: typec: tcpci: fix of node refcount leak in tcpci_register_port()
usb: roles: fix of node refcount leak in usb_role_switch_is_parent()
usb: core: hcd: Fix return value check in usb_hcd_setup_local_mem()
usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe()
Yi Yang (1):
usb: fotg210-udc: fix potential memory leak in fotg210_udc_probe()
Documentation/ABI/testing/configfs-usb-gadget-uvc | 4 +-
Documentation/ABI/testing/sysfs-bus-usb | 11 +
.../bindings/phy/fsl,imx8mq-usb-phy.yaml | 3 +
Documentation/devicetree/bindings/usb/dwc2.yaml | 3 +
.../devicetree/bindings/usb/genesys,gl850g.yaml | 48 +
.../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 1 +
.../devicetree/bindings/usb/mediatek,mtu3.yaml | 1 +
.../devicetree/bindings/usb/qcom,dwc3.yaml | 3 +
Documentation/devicetree/bindings/usb/usb-drd.yaml | 1 +
.../devicetree/bindings/usb/usb-nop-xceiv.yaml | 5 +
Documentation/devicetree/bindings/usb/usb251xb.txt | 89 --
.../devicetree/bindings/usb/usb251xb.yaml | 271 ++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
Documentation/driver-api/driver-model/devres.rst | 2 +
MAINTAINERS | 8 +-
arch/powerpc/configs/ppc6xx_defconfig | 1 -
arch/sh/configs/landisk_defconfig | 1 -
drivers/extcon/extcon-usbc-tusb320.c | 17 +-
drivers/platform/chrome/cros_ec_typec.c | 2 +-
drivers/thunderbolt/acpi.c | 12 +-
drivers/thunderbolt/switch.c | 5 +-
drivers/thunderbolt/tb_regs.h | 2 +
drivers/thunderbolt/usb4.c | 33 +-
drivers/thunderbolt/usb4_port.c | 3 +
drivers/thunderbolt/xdomain.c | 4 +-
drivers/usb/Kconfig | 4 +
drivers/usb/Makefile | 2 +
drivers/usb/cdns3/cdnsp-pci.c | 8 +-
drivers/usb/cdns3/cdnsp-ring.c | 42 +-
drivers/usb/chipidea/ci.h | 4 +
drivers/usb/chipidea/ci_hdrc_imx.c | 51 +-
drivers/usb/chipidea/ci_hdrc_imx.h | 4 +-
drivers/usb/chipidea/core.c | 143 +-
drivers/usb/chipidea/host.c | 16 +
drivers/usb/chipidea/otg.c | 2 +-
drivers/usb/chipidea/otg.h | 1 +
drivers/usb/chipidea/udc.c | 32 +
drivers/usb/chipidea/usbmisc_imx.c | 160 +-
drivers/usb/common/ulpi.c | 2 +-
drivers/usb/core/config.c | 82 +-
drivers/usb/core/hcd-pci.c | 13 +
drivers/usb/core/hcd.c | 6 +-
drivers/usb/core/hub.c | 60 +
drivers/usb/core/hub.h | 4 +
drivers/usb/core/port.c | 30 +-
drivers/usb/core/sysfs.c | 7 +-
drivers/usb/dwc2/gadget.c | 6 +-
drivers/usb/dwc2/params.c | 4 +
drivers/usb/dwc2/platform.c | 5 +-
drivers/usb/dwc3/Kconfig | 4 +-
drivers/usb/dwc3/core.c | 23 +-
drivers/usb/dwc3/dwc3-pci.c | 2 +-
drivers/usb/dwc3/dwc3-qcom.c | 13 +-
drivers/usb/dwc3/gadget.c | 14 +-
drivers/usb/fotg210/Kconfig | 38 +
drivers/usb/fotg210/Makefile | 10 +
drivers/usb/fotg210/fotg210-core.c | 166 +++
drivers/usb/{host => fotg210}/fotg210-hcd.c | 51 +-
.../usb/{host/fotg210.h => fotg210/fotg210-hcd.h} | 0
drivers/usb/{gadget/udc => fotg210}/fotg210-udc.c | 164 ++-
.../udc/fotg210.h => fotg210/fotg210-udc.h} | 3 +
drivers/usb/fotg210/fotg210.h | 42 +
drivers/usb/gadget/configfs.c | 3 +-
drivers/usb/gadget/function/f_ecm.c | 22 +-
drivers/usb/gadget/function/f_hid.c | 60 +-
drivers/usb/gadget/function/f_mass_storage.c | 3 +-
drivers/usb/gadget/function/f_printer.c | 9 +-
drivers/usb/gadget/function/f_uvc.c | 20 +-
drivers/usb/gadget/function/storage_common.c | 9 +-
drivers/usb/gadget/function/u_ether.c | 4 -
drivers/usb/gadget/function/u_serial.c | 3 +-
drivers/usb/gadget/function/uvc_configfs.c | 12 +-
drivers/usb/gadget/legacy/serial.c | 3 +-
drivers/usb/gadget/legacy/webcam.c | 4 +-
drivers/usb/gadget/udc/Kconfig | 15 +-
drivers/usb/gadget/udc/Makefile | 1 -
drivers/usb/gadget/udc/aspeed-vhub/core.c | 2 +-
drivers/usb/gadget/udc/aspeed-vhub/epn.c | 16 +-
drivers/usb/gadget/udc/at91_udc.c | 5 +-
drivers/usb/gadget/udc/core.c | 12 +-
drivers/usb/host/Kconfig | 13 +-
drivers/usb/host/Makefile | 1 -
drivers/usb/host/ehci-grlib.c | 2 +-
drivers/usb/host/ehci-pci.c | 7 +-
drivers/usb/host/ehci-ppc-of.c | 2 +-
drivers/usb/host/ehci.h | 2 +-
drivers/usb/host/fhci-hcd.c | 2 +-
drivers/usb/host/ohci-ppc-of.c | 2 +-
drivers/usb/host/uhci-grlib.c | 2 +-
drivers/usb/host/xhci-hub.c | 22 +-
drivers/usb/host/xhci-mtk.c | 73 +-
drivers/usb/host/xhci-pci.c | 63 +-
drivers/usb/host/xhci-ring.c | 42 +-
drivers/usb/host/xhci.h | 2 +-
drivers/usb/misc/Kconfig | 2 +-
drivers/usb/misc/ftdi-elan.c | 4 -
drivers/usb/misc/onboard_usb_hub.c | 2 +
drivers/usb/misc/onboard_usb_hub.h | 5 +
drivers/usb/misc/sisusbvga/Kconfig | 34 -
drivers/usb/misc/sisusbvga/Makefile | 3 -
drivers/usb/misc/sisusbvga/sisusb.h | 21 -
drivers/usb/misc/sisusbvga/sisusb_con.c | 1496 -------------------
drivers/usb/misc/sisusbvga/sisusb_init.c | 955 ------------
drivers/usb/misc/sisusbvga/sisusb_init.h | 180 ---
.../usb/misc/sisusbvga/{sisusb.c => sisusbvga.c} | 289 +---
drivers/usb/misc/usb251xb.c | 5 +-
drivers/usb/misc/usb3503.c | 5 +-
drivers/usb/misc/usb4604.c | 5 +-
drivers/usb/musb/Kconfig | 18 -
drivers/usb/musb/Makefile | 3 -
drivers/usb/musb/am35x.c | 610 --------
drivers/usb/musb/cppi_dma.c | 1547 --------------------
drivers/usb/musb/davinci.c | 606 --------
drivers/usb/musb/davinci.h | 103 --
drivers/usb/musb/jz4740.c | 62 +-
drivers/usb/musb/musb_core.c | 107 +-
drivers/usb/musb/musb_core.h | 24 +
drivers/usb/musb/musb_debugfs.c | 6 +-
drivers/usb/musb/musb_dma.h | 13 +-
drivers/usb/musb/musb_gadget.c | 61 +-
drivers/usb/musb/musb_host.c | 18 +-
drivers/usb/musb/musb_virthub.c | 33 +-
drivers/usb/musb/omap2430.c | 54 +
drivers/usb/phy/Kconfig | 14 +-
drivers/usb/phy/Makefile | 1 -
drivers/usb/phy/phy-generic.c | 18 +-
drivers/usb/phy/phy-gpio-vbus-usb.c | 12 +
drivers/usb/phy/phy-isp1301-omap.c | 4 +-
drivers/usb/phy/phy-isp1301.c | 5 +-
drivers/usb/phy/phy-jz4770.c | 353 -----
drivers/usb/roles/class.c | 5 +-
drivers/usb/serial/cp210x.c | 21 +-
drivers/usb/serial/f81232.c | 12 +-
drivers/usb/serial/f81534.c | 12 +-
drivers/usb/serial/option.c | 3 +
drivers/usb/serial/xr_serial.c | 2 -
drivers/usb/storage/alauda.c | 2 +
drivers/usb/typec/anx7411.c | 5 +-
drivers/usb/typec/bus.c | 2 +-
drivers/usb/typec/class.c | 19 +
drivers/usb/typec/hd3ss3220.c | 5 +-
drivers/usb/typec/retimer.c | 16 +-
drivers/usb/typec/retimer.h | 4 +
drivers/usb/typec/tcpm/fusb302.c | 5 +-
drivers/usb/typec/tcpm/tcpci.c | 10 +-
drivers/usb/typec/tcpm/tcpci_maxim.c | 4 +-
drivers/usb/typec/tcpm/tcpci_rt1711h.c | 5 +-
drivers/usb/typec/tipd/core.c | 20 +-
drivers/usb/typec/ucsi/ucsi.c | 17 +-
drivers/usb/typec/ucsi/ucsi.h | 1 +
drivers/usb/typec/ucsi/ucsi_ccg.c | 5 +-
drivers/usb/typec/ucsi/ucsi_stm32g0.c | 4 +-
drivers/usb/typec/wusb3801.c | 2 +-
drivers/usb/usb-skeleton.c | 1 -
drivers/usb/usbip/stub_dev.c | 4 +-
drivers/usb/usbip/vudc_rx.c | 4 +-
drivers/usb/usbip/vudc_sysfs.c | 2 +-
include/linux/usb.h | 12 +
include/linux/usb/hcd.h | 3 +
include/linux/usb/typec.h | 4 +
include/uapi/linux/usb/g_uvc.h | 3 +
include/uapi/linux/usb/video.h | 4 +-
.../ffs-aio-example/simple/device_app/aio_simple.c | 44 +-
163 files changed, 2079 insertions(+), 7049 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
delete mode 100644 Documentation/devicetree/bindings/usb/usb251xb.txt
create mode 100644 Documentation/devicetree/bindings/usb/usb251xb.yaml
create mode 100644 drivers/usb/fotg210/Kconfig
create mode 100644 drivers/usb/fotg210/Makefile
create mode 100644 drivers/usb/fotg210/fotg210-core.c
rename drivers/usb/{host => fotg210}/fotg210-hcd.c (99%)
rename drivers/usb/{host/fotg210.h => fotg210/fotg210-hcd.h} (100%)
rename drivers/usb/{gadget/udc => fotg210}/fotg210-udc.c (89%)
rename drivers/usb/{gadget/udc/fotg210.h => fotg210/fotg210-udc.h} (99%)
create mode 100644 drivers/usb/fotg210/fotg210.h
delete mode 100644 drivers/usb/misc/sisusbvga/sisusb_con.c
delete mode 100644 drivers/usb/misc/sisusbvga/sisusb_init.c
delete mode 100644 drivers/usb/misc/sisusbvga/sisusb_init.h
rename drivers/usb/misc/sisusbvga/{sisusb.c => sisusbvga.c} (91%)
delete mode 100644 drivers/usb/musb/am35x.c
delete mode 100644 drivers/usb/musb/cppi_dma.c
delete mode 100644 drivers/usb/musb/davinci.c
delete mode 100644 drivers/usb/musb/davinci.h
delete mode 100644 drivers/usb/phy/phy-jz4770.c
next reply other threads:[~2022-12-16 8:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-16 8:43 Greg KH [this message]
2022-12-16 16:00 ` [GIT PULL] USB/Thunderbolt driver changes for 6.2-rc1 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y5wvvK08gUxb7feH@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).