linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Ben Gardon <bgardon@google.com>
Cc: linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
	Paolo Bonzini <pbonzini@redhat.com>, Peter Xu <peterx@redhat.com>,
	Peter Shier <pshier@google.com>,
	Peter Feiner <pfeiner@google.com>,
	Junaid Shahid <junaids@google.com>,
	Jim Mattson <jmattson@google.com>,
	Yulei Zhang <yulei.kernel@gmail.com>,
	Wanpeng Li <kernellwp@gmail.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	Xiao Guangrong <xiaoguangrong.eric@gmail.com>
Subject: Re: [PATCH v2 21/28] KVM: x86/mmu: Flush TLBs after zap in TDP MMU PF handler
Date: Fri, 5 Feb 2021 16:29:09 -0800	[thread overview]
Message-ID: <YB3i1UXM/uIzHJuD@google.com> (raw)
In-Reply-To: <20210202185734.1680553-22-bgardon@google.com>

On Tue, Feb 02, 2021, Ben Gardon wrote:
> +static inline bool tdp_mmu_zap_spte_atomic(struct kvm *kvm,
> +					   struct tdp_iter *iter)
> +{
> +	/*
> +	 * Freeze the SPTE by setting it to a special,
> +	 * non-present value. This will stop other threads from
> +	 * immediately installing a present entry in its place
> +	 * before the TLBs are flushed.
> +	 */
> +	if (!tdp_mmu_set_spte_atomic(kvm, iter, REMOVED_SPTE))
> +		return false;
> +
> +	kvm_flush_remote_tlbs_with_address(kvm, iter->gfn,
> +					   KVM_PAGES_PER_HPAGE(iter->level));
> +
> +	/*
> +	 * No other thread can overwrite the removed SPTE as they
> +	 * must either wait on the MMU lock or use
> +	 * tdp_mmu_set_spte_atomic which will not overrite the
> +	 * special removed SPTE value. No bookkeeping is needed
> +	 * here since the SPTE is going from non-present
> +	 * to non-present.
> +	 */

Can we expand these comments out to 80 chars before the final/official push?

> +	WRITE_ONCE(*iter->sptep, 0);
> +
> +	return true;
> +}
> +
>  
>  /*
>   * __tdp_mmu_set_spte - Set a TDP MMU SPTE and handle the associated bookkeeping
> @@ -523,6 +562,15 @@ static inline void __tdp_mmu_set_spte(struct kvm *kvm, struct tdp_iter *iter,
>  
>  	lockdep_assert_held_write(&kvm->mmu_lock);
>  
> +	/*
> +	 * No thread should be using this function to set SPTEs to the
> +	 * temporary removed SPTE value.
> +	 * If operating under the MMU lock in read mode, tdp_mmu_set_spte_atomic
> +	 * should be used. If operating under the MMU lock in write mode, the
> +	 * use of the removed SPTE should not be necessary.
> +	 */
> +	WARN_ON(iter->old_spte == REMOVED_SPTE);
> +
>  	WRITE_ONCE(*rcu_dereference(iter->sptep), new_spte);
>  
>  	__handle_changed_spte(kvm, as_id, iter->gfn, iter->old_spte, new_spte,
> @@ -790,12 +838,9 @@ int kvm_tdp_mmu_map(struct kvm_vcpu *vcpu, gpa_t gpa, u32 error_code,
>  		 */
>  		if (is_shadow_present_pte(iter.old_spte) &&
>  		    is_large_pte(iter.old_spte)) {
> -			if (!tdp_mmu_set_spte_atomic(vcpu->kvm, &iter, 0))
> +			if (!tdp_mmu_zap_spte_atomic(vcpu->kvm, &iter))
>  				break;
>  
> -			kvm_flush_remote_tlbs_with_address(vcpu->kvm, iter.gfn,
> -					KVM_PAGES_PER_HPAGE(iter.level));
> -
>  			/*
>  			 * The iter must explicitly re-read the spte here
>  			 * because the new value informs the !present
> -- 
> 2.30.0.365.g02bc693789-goog
> 

  reply	other threads:[~2021-02-06  4:17 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-02 18:57 [PATCH v2 00/28] Allow parallel MMU operations with TDP MMU Ben Gardon
2021-02-02 18:57 ` [PATCH v2 01/28] KVM: x86/mmu: change TDP MMU yield function returns to match cond_resched Ben Gardon
2021-02-02 18:57 ` [PATCH v2 02/28] KVM: x86/mmu: Add comment on __tdp_mmu_set_spte Ben Gardon
2021-02-02 18:57 ` [PATCH v2 03/28] KVM: x86/mmu: Add lockdep when setting a TDP MMU SPTE Ben Gardon
2021-02-02 18:57 ` [PATCH v2 04/28] KVM: x86/mmu: Don't redundantly clear TDP MMU pt memory Ben Gardon
2021-02-02 18:57 ` [PATCH v2 05/28] KVM: x86/mmu: Factor out handling of removed page tables Ben Gardon
2021-02-02 18:57 ` [PATCH v2 06/28] locking/rwlocks: Add contention detection for rwlocks Ben Gardon
2021-02-09 20:39   ` Guenter Roeck
2021-02-09 21:46     ` Waiman Long
2021-02-09 22:25       ` Guenter Roeck
2021-02-10  0:27         ` Waiman Long
2021-02-10  0:41           ` Waiman Long
2021-02-10  6:04           ` Guenter Roeck
2021-02-10 14:57             ` Waiman Long
2021-02-10  3:32   ` Waiman Long
2021-02-10 15:15     ` Waiman Long
2021-02-02 18:57 ` [PATCH v2 07/28] sched: Add needbreak " Ben Gardon
2021-02-02 18:57 ` [PATCH v2 08/28] sched: Add cond_resched_rwlock Ben Gardon
2021-02-02 18:57 ` [PATCH v2 09/28] KVM: x86/mmu: Fix braces in kvm_recover_nx_lpages Ben Gardon
2021-02-02 18:57 ` [PATCH v2 10/28] KVM: x86/mmu: Fix TDP MMU zap collapsible SPTEs Ben Gardon
2021-02-03  9:43   ` Paolo Bonzini
2021-02-02 18:57 ` [PATCH v2 11/28] KVM: x86/mmu: Merge flush and non-flush tdp_mmu_iter_cond_resched Ben Gardon
2021-02-02 18:57 ` [PATCH v2 12/28] KVM: x86/mmu: Rename goal_gfn to next_last_level_gfn Ben Gardon
2021-02-02 18:57 ` [PATCH v2 13/28] KVM: x86/mmu: Ensure forward progress when yielding in TDP MMU iter Ben Gardon
2021-02-05 23:42   ` Sean Christopherson
2021-02-02 18:57 ` [PATCH v2 14/28] KVM: x86/mmu: Yield in TDU MMU iter even if no SPTES changed Ben Gardon
2021-02-02 18:57 ` [PATCH v2 15/28] KVM: x86/mmu: Skip no-op changes in TDP MMU functions Ben Gardon
2021-02-02 18:57 ` [PATCH v2 16/28] KVM: x86/mmu: Clear dirtied pages mask bit before early break Ben Gardon
2021-02-02 18:57 ` [PATCH v2 17/28] KVM: x86/mmu: Protect TDP MMU page table memory with RCU Ben Gardon
2021-02-02 18:57 ` [PATCH v2 18/28] KVM: x86/mmu: Use an rwlock for the x86 MMU Ben Gardon
2021-02-02 18:57 ` [PATCH v2 19/28] KVM: x86/mmu: Factor out functions to add/remove TDP MMU pages Ben Gardon
2021-02-02 18:57 ` [PATCH v2 20/28] KVM: x86/mmu: Use atomic ops to set SPTEs in TDP MMU map Ben Gardon
2021-02-03  2:48   ` kernel test robot
2021-02-03 11:14   ` Paolo Bonzini
2021-02-06  0:26     ` Sean Christopherson
2021-02-08 10:32       ` Paolo Bonzini
2021-04-01 10:32   ` Paolo Bonzini
2021-04-01 16:50     ` Ben Gardon
2021-04-01 17:32       ` Paolo Bonzini
2021-04-01 18:09         ` Sean Christopherson
2021-02-02 18:57 ` [PATCH v2 21/28] KVM: x86/mmu: Flush TLBs after zap in TDP MMU PF handler Ben Gardon
2021-02-06  0:29   ` Sean Christopherson [this message]
2021-02-02 18:57 ` [PATCH v2 22/28] KVM: x86/mmu: Mark SPTEs in disconnected pages as removed Ben Gardon
2021-02-03 11:17   ` Paolo Bonzini
2021-02-02 18:57 ` [PATCH v2 23/28] KVM: x86/mmu: Allow parallel page faults for the TDP MMU Ben Gardon
2021-02-03 12:39   ` Paolo Bonzini
2021-02-03 17:46     ` Ben Gardon
2021-02-03 18:30       ` Paolo Bonzini
2021-02-06  0:12         ` Sean Christopherson
2021-02-02 18:57 ` [PATCH v2 24/28] KVM: x86/mmu: Allow zap gfn range to operate under the mmu read lock Ben Gardon
2021-02-03 11:25   ` Paolo Bonzini
2021-02-03 11:26   ` Paolo Bonzini
2021-02-03 18:31     ` Ben Gardon
2021-02-03 18:32       ` Paolo Bonzini
2021-02-02 18:57 ` [PATCH v2 25/28] KVM: x86/mmu: Allow zapping collapsible SPTEs to use MMU " Ben Gardon
2021-02-03 11:34   ` Paolo Bonzini
2021-02-03 18:51     ` Ben Gardon
2021-02-02 18:57 ` [PATCH v2 26/28] KVM: x86/mmu: Allow enabling / disabling dirty logging under " Ben Gardon
2021-02-03 11:38   ` Paolo Bonzini
2021-02-02 18:57 ` [PATCH v2 27/28] KVM: selftests: Add backing src parameter to dirty_log_perf_test Ben Gardon
2021-02-02 18:57 ` [PATCH v2 28/28] KVM: selftests: Disable dirty logging with vCPUs running Ben Gardon
2021-02-03 10:07   ` Paolo Bonzini
2021-02-03 11:00 ` [PATCH v2 00/28] Allow parallel MMU operations with TDP MMU Paolo Bonzini
2021-02-03 17:54   ` Sean Christopherson
2021-02-03 18:13     ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YB3i1UXM/uIzHJuD@google.com \
    --to=seanjc@google.com \
    --cc=bgardon@google.com \
    --cc=jmattson@google.com \
    --cc=junaids@google.com \
    --cc=kernellwp@gmail.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=peterx@redhat.com \
    --cc=pfeiner@google.com \
    --cc=pshier@google.com \
    --cc=vkuznets@redhat.com \
    --cc=xiaoguangrong.eric@gmail.com \
    --cc=yulei.kernel@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).