linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michal Hocko <mhocko@suse.com>
To: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <songmuchun@bytedance.com>,
	vdavydov.dev@gmail.com, akpm@linux-foundation.org,
	cgroups@vger.kernel.org, linux-mm@kvack.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/4] mm: memcontrol: fix swap uncharge on cgroup v2
Date: Tue, 16 Feb 2021 18:19:39 +0100	[thread overview]
Message-ID: <YCv+q749iP4J/pWC@dhcp22.suse.cz> (raw)
In-Reply-To: <YCv51LgGIWxVjLHT@cmpxchg.org>

On Tue 16-02-21 11:59:00, Johannes Weiner wrote:
> Hello Muchun,
> 
> On Sat, Feb 13, 2021 at 01:01:59AM +0800, Muchun Song wrote:
> > The swap charges the actual number of swap entries on cgroup v2.
> > If a swap cache page is charged successful, and then we uncharge
> > the swap counter. It is wrong on cgroup v2. Because the swap
> > entry is not freed.
> 
> The patch makes sense to me. But this code is a bit tricky, we should
> add more documentation to how it works and what the problem is.
> 
> How about this for the changelog?
> 
> ---
> mm: memcontrol: fix swap undercounting for shared pages in cgroup2
> 
> When shared pages are swapped in partially, we can have some page
> tables referencing the in-memory page and some referencing the swap
> slot. Cgroup1 and cgroup2 handle these overlapping lifetimes slightly
> differently due to the nature of how they account memory and swap:
> 
> Cgroup1 has a unified memory+swap counter that tracks a data page
> regardless whether it's in-core or swapped out. On swapin, we transfer
> the charge from the swap entry to the newly allocated swapcache page,
> even though the swap entry might stick around for a while. That's why
> we have a mem_cgroup_uncharge_swap() call inside mem_cgroup_charge().
> 
> Cgroup2 tracks memory and swap as separate, independent resources and
> thus has split memory and swap counters. On swapin, we charge the
> newly allocated swapcache page as memory, while the swap slot in turn
> must remain charged to the swap counter as long as its allocated too.
> 
> The cgroup2 logic was broken by commit 2d1c498072de ("mm: memcontrol:
> make swap tracking an integral part of memory control"), because it
> accidentally removed the do_memsw_account() check in the branch inside
> mem_cgroup_uncharge() that was supposed to tell the difference between
> the charge transfer in cgroup1 and the separate counters in cgroup2.
> 
> As a result, cgroup2 currently undercounts consumed swap when shared
> pages are partially swapped back in. This in turn allows a cgroup to
> consume more swap than its configured limit intends.
> 
> Add the do_memsw_account() check back to fix this problem.

Yes this clarfies both the issue and the subtlety of the accounting.
Thanks a lot Johannes! This is a great example of how changelogs should
really look.

> ---
> 
> > Fixes: 2d1c498072de ("mm: memcontrol: make swap tracking an integral part of memory control")
> > Signed-off-by: Muchun Song <songmuchun@bytedance.com>
> 
> Acked-by: Johannes Weiner <hannes@cmpxchg.org>
> 
> > ---
> >  mm/memcontrol.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> > index c737c8f05992..be6bc5044150 100644
> > --- a/mm/memcontrol.c
> > +++ b/mm/memcontrol.c
> > @@ -6753,7 +6753,7 @@ int mem_cgroup_charge(struct page *page, struct mm_struct *mm, gfp_t gfp_mask)
> >  	memcg_check_events(memcg, page);
> >  	local_irq_enable();
> >  
> > -	if (PageSwapCache(page)) {
> > +	if (!cgroup_subsys_on_dfl(memory_cgrp_subsys) && PageSwapCache(page)) {
> 
> It's more descriptive to use do_memsw_account() here, IMO.
> 
> We should also add a comment. How about this above the branch?
> 
> 	/*
> 	 * Cgroup1's unified memory+swap counter has been charged with the
> 	 * new swapcache page, finish the transfer by uncharging the swap
> 	 * slot. The swap slot would also get uncharged when it dies, but
> 	 * for shared pages it can stick around indefinitely and we'd count
> 	 * the page twice the entire time.
> 	 *
> 	 * Cgroup2 has separate resource counters for memory and swap,
> 	 * so this is a non-issue here. Memory and swap charge lifetimes
> 	 * correspond 1:1 to page and swap slot lifetimes: we charge the
> 	 * page to memory here, and uncharge swap when the slot is freed.
> 	 */

Yes very helpful.

With the changelog update and the comment
Acked-by: Michal Hocko <mhocko@suse.com>

Thanks!

-- 
Michal Hocko
SUSE Labs

  parent reply	other threads:[~2021-02-16 17:20 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-12 17:01 [PATCH 1/4] mm: memcontrol: remove memcg check from memcg_oom_recover Muchun Song
2021-02-12 17:01 ` [PATCH 2/4] mm: memcontrol: add missing memcg_oom_recover() when uncharge slab page Muchun Song
2021-02-15  9:37   ` Michal Hocko
2021-02-12 17:01 ` [PATCH 3/4] mm: memcontrol: bail out early when id is zero Muchun Song
2021-02-15  9:39   ` Michal Hocko
2021-02-15 10:09     ` [External] " Muchun Song
2021-02-15 10:27       ` Michal Hocko
2021-02-15 11:34         ` Muchun Song
2021-02-12 17:01 ` [PATCH 4/4] mm: memcontrol: fix swap uncharge on cgroup v2 Muchun Song
2021-02-12 18:56   ` Shakeel Butt
2021-02-13  6:48     ` [External] " Muchun Song
2021-02-16 17:16       ` Shakeel Butt
2021-02-15  9:47   ` Michal Hocko
2021-02-15 10:15     ` [External] " Muchun Song
2021-02-15 10:24       ` Michal Hocko
2021-02-16 16:59   ` Johannes Weiner
2021-02-16 17:17     ` Shakeel Butt
2021-02-16 17:19     ` Michal Hocko [this message]
2021-02-16 17:28     ` Johannes Weiner
2021-02-17  5:15       ` [External] " Muchun Song
2021-02-17  5:11     ` Muchun Song
2021-02-15  9:24 ` [PATCH 1/4] mm: memcontrol: remove memcg check from memcg_oom_recover Michal Hocko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YCv+q749iP4J/pWC@dhcp22.suse.cz \
    --to=mhocko@suse.com \
    --cc=akpm@linux-foundation.org \
    --cc=cgroups@vger.kernel.org \
    --cc=hannes@cmpxchg.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=songmuchun@bytedance.com \
    --cc=vdavydov.dev@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).