* [PATCH v2 0/2] media: i2c: imx219: Trivial Fixes
@ 2021-03-11 9:52 Lad Prabhakar
2021-03-11 9:52 ` [PATCH v2 1/2] media: i2c: imx219: Move out locking/unlocking of vflip and hflip controls from imx219_set_stream Lad Prabhakar
2021-03-11 9:52 ` [PATCH v2 2/2] media: i2c: imx219: Balance runtime PM use-count Lad Prabhakar
0 siblings, 2 replies; 5+ messages in thread
From: Lad Prabhakar @ 2021-03-11 9:52 UTC (permalink / raw)
To: Dave Stevenson, Mauro Carvalho Chehab, Laurent Pinchart
Cc: Pavel Machek, Andrey Konovalov, Sakari Ailus, Jacopo Mondi,
Hans Verkuil, linux-media, linux-kernel, linux-renesas-soc,
Prabhakar, Lad Prabhakar, Biju Das
Hi All,
This patch series fixes trivial issues found in imx219 driver.
Cheers,
Prabhakar
Changes for v2:
* Dropped serialization patch
* Moved locking/unlocking of controls to imx219_start/imx219_stop as
suggested by Laurent.
* Moved incrementing/decrementing to imx219_start/imx219_stop as
suggested by Laurent.
Lad Prabhakar (2):
media: i2c: imx219: Move out locking/unlocking of vflip and hflip
controls from imx219_set_stream
media: i2c: imx219: Balance runtime PM use-count
drivers/media/i2c/imx219.c | 49 ++++++++++++++++++++++----------------
1 file changed, 29 insertions(+), 20 deletions(-)
--
2.17.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2 1/2] media: i2c: imx219: Move out locking/unlocking of vflip and hflip controls from imx219_set_stream
2021-03-11 9:52 [PATCH v2 0/2] media: i2c: imx219: Trivial Fixes Lad Prabhakar
@ 2021-03-11 9:52 ` Lad Prabhakar
2021-03-15 0:02 ` Laurent Pinchart
2021-03-11 9:52 ` [PATCH v2 2/2] media: i2c: imx219: Balance runtime PM use-count Lad Prabhakar
1 sibling, 1 reply; 5+ messages in thread
From: Lad Prabhakar @ 2021-03-11 9:52 UTC (permalink / raw)
To: Dave Stevenson, Mauro Carvalho Chehab, Laurent Pinchart
Cc: Pavel Machek, Andrey Konovalov, Sakari Ailus, Jacopo Mondi,
Hans Verkuil, linux-media, linux-kernel, linux-renesas-soc,
Prabhakar, Lad Prabhakar, Biju Das
Move out locking/unlocking of vflip and hflip controls from
imx219_set_stream() to the imx219_start_streaming()/
imx219_stop_streaming() respectively.
This fixes an issue in resume callback error path where streaming is
stopped and the controls are left in locked state.
Fixes: 1283b3b8f82b9 ("media: i2c: Add driver for Sony IMX219 sensor")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/media/i2c/imx219.c | 19 +++++++++++++------
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index 6e3382b85a90..82756cbfbaac 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -1056,8 +1056,16 @@ static int imx219_start_streaming(struct imx219 *imx219)
return ret;
/* set stream on register */
- return imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
- IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING);
+ ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
+ IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING);
+ if (ret)
+ return ret;
+
+ /* vflip and hflip cannot change during streaming */
+ __v4l2_ctrl_grab(imx219->vflip, true);
+ __v4l2_ctrl_grab(imx219->hflip, true);
+
+ return 0;
}
static void imx219_stop_streaming(struct imx219 *imx219)
@@ -1070,6 +1078,9 @@ static void imx219_stop_streaming(struct imx219 *imx219)
IMX219_REG_VALUE_08BIT, IMX219_MODE_STANDBY);
if (ret)
dev_err(&client->dev, "%s failed to set stream\n", __func__);
+
+ __v4l2_ctrl_grab(imx219->vflip, false);
+ __v4l2_ctrl_grab(imx219->hflip, false);
}
static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
@@ -1105,10 +1116,6 @@ static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
imx219->streaming = enable;
- /* vflip and hflip cannot change during streaming */
- __v4l2_ctrl_grab(imx219->vflip, enable);
- __v4l2_ctrl_grab(imx219->hflip, enable);
-
mutex_unlock(&imx219->mutex);
return ret;
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 2/2] media: i2c: imx219: Balance runtime PM use-count
2021-03-11 9:52 [PATCH v2 0/2] media: i2c: imx219: Trivial Fixes Lad Prabhakar
2021-03-11 9:52 ` [PATCH v2 1/2] media: i2c: imx219: Move out locking/unlocking of vflip and hflip controls from imx219_set_stream Lad Prabhakar
@ 2021-03-11 9:52 ` Lad Prabhakar
2021-03-15 0:03 ` Laurent Pinchart
1 sibling, 1 reply; 5+ messages in thread
From: Lad Prabhakar @ 2021-03-11 9:52 UTC (permalink / raw)
To: Dave Stevenson, Mauro Carvalho Chehab, Laurent Pinchart
Cc: Pavel Machek, Andrey Konovalov, Sakari Ailus, Jacopo Mondi,
Hans Verkuil, linux-media, linux-kernel, linux-renesas-soc,
Prabhakar, Lad Prabhakar, Biju Das
Move incrementing/decrementing runtime PM count to
imx219_start_streaming()/imx219_stop_streaming() functions respectively.
This fixes an issue of unbalanced runtime PM count in resume callback
error path where streaming is stopped and runtime PM count is left
unbalanced.
Fixes: 1283b3b8f82b9 ("media: i2c: Add driver for Sony IMX219 sensor")
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/media/i2c/imx219.c | 32 +++++++++++++++++---------------
1 file changed, 17 insertions(+), 15 deletions(-)
diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index 82756cbfbaac..49ba39418360 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -1035,37 +1035,47 @@ static int imx219_start_streaming(struct imx219 *imx219)
const struct imx219_reg_list *reg_list;
int ret;
+ ret = pm_runtime_get_sync(&client->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&client->dev);
+ return ret;
+ }
+
/* Apply default values of current mode */
reg_list = &imx219->mode->reg_list;
ret = imx219_write_regs(imx219, reg_list->regs, reg_list->num_of_regs);
if (ret) {
dev_err(&client->dev, "%s failed to set mode\n", __func__);
- return ret;
+ goto err_rpm_put;
}
ret = imx219_set_framefmt(imx219);
if (ret) {
dev_err(&client->dev, "%s failed to set frame format: %d\n",
__func__, ret);
- return ret;
+ goto err_rpm_put;
}
/* Apply customized values from user */
ret = __v4l2_ctrl_handler_setup(imx219->sd.ctrl_handler);
if (ret)
- return ret;
+ goto err_rpm_put;
/* set stream on register */
ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING);
if (ret)
- return ret;
+ goto err_rpm_put;
/* vflip and hflip cannot change during streaming */
__v4l2_ctrl_grab(imx219->vflip, true);
__v4l2_ctrl_grab(imx219->hflip, true);
return 0;
+
+err_rpm_put:
+ pm_runtime_put(&client->dev);
+ return ret;
}
static void imx219_stop_streaming(struct imx219 *imx219)
@@ -1081,12 +1091,13 @@ static void imx219_stop_streaming(struct imx219 *imx219)
__v4l2_ctrl_grab(imx219->vflip, false);
__v4l2_ctrl_grab(imx219->hflip, false);
+
+ pm_runtime_put(&client->dev);
}
static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
{
struct imx219 *imx219 = to_imx219(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
int ret = 0;
mutex_lock(&imx219->mutex);
@@ -1096,22 +1107,15 @@ static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
}
if (enable) {
- ret = pm_runtime_get_sync(&client->dev);
- if (ret < 0) {
- pm_runtime_put_noidle(&client->dev);
- goto err_unlock;
- }
-
/*
* Apply default & customized values
* and then start streaming.
*/
ret = imx219_start_streaming(imx219);
if (ret)
- goto err_rpm_put;
+ goto err_unlock;
} else {
imx219_stop_streaming(imx219);
- pm_runtime_put(&client->dev);
}
imx219->streaming = enable;
@@ -1120,8 +1124,6 @@ static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
return ret;
-err_rpm_put:
- pm_runtime_put(&client->dev);
err_unlock:
mutex_unlock(&imx219->mutex);
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/2] media: i2c: imx219: Move out locking/unlocking of vflip and hflip controls from imx219_set_stream
2021-03-11 9:52 ` [PATCH v2 1/2] media: i2c: imx219: Move out locking/unlocking of vflip and hflip controls from imx219_set_stream Lad Prabhakar
@ 2021-03-15 0:02 ` Laurent Pinchart
0 siblings, 0 replies; 5+ messages in thread
From: Laurent Pinchart @ 2021-03-15 0:02 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Dave Stevenson, Mauro Carvalho Chehab, Pavel Machek,
Andrey Konovalov, Sakari Ailus, Jacopo Mondi, Hans Verkuil,
linux-media, linux-kernel, linux-renesas-soc, Prabhakar,
Biju Das
Hi Prabhakar,
Thank you for the patch.
On Thu, Mar 11, 2021 at 09:52:04AM +0000, Lad Prabhakar wrote:
> Move out locking/unlocking of vflip and hflip controls from
> imx219_set_stream() to the imx219_start_streaming()/
> imx219_stop_streaming() respectively.
>
> This fixes an issue in resume callback error path where streaming is
> stopped and the controls are left in locked state.
>
> Fixes: 1283b3b8f82b9 ("media: i2c: Add driver for Sony IMX219 sensor")
> Reported-by: Pavel Machek <pavel@denx.de>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/media/i2c/imx219.c | 19 +++++++++++++------
> 1 file changed, 13 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
> index 6e3382b85a90..82756cbfbaac 100644
> --- a/drivers/media/i2c/imx219.c
> +++ b/drivers/media/i2c/imx219.c
> @@ -1056,8 +1056,16 @@ static int imx219_start_streaming(struct imx219 *imx219)
> return ret;
>
> /* set stream on register */
> - return imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
> - IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING);
> + ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
> + IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING);
> + if (ret)
> + return ret;
> +
> + /* vflip and hflip cannot change during streaming */
> + __v4l2_ctrl_grab(imx219->vflip, true);
> + __v4l2_ctrl_grab(imx219->hflip, true);
> +
> + return 0;
> }
>
> static void imx219_stop_streaming(struct imx219 *imx219)
> @@ -1070,6 +1078,9 @@ static void imx219_stop_streaming(struct imx219 *imx219)
> IMX219_REG_VALUE_08BIT, IMX219_MODE_STANDBY);
> if (ret)
> dev_err(&client->dev, "%s failed to set stream\n", __func__);
> +
> + __v4l2_ctrl_grab(imx219->vflip, false);
> + __v4l2_ctrl_grab(imx219->hflip, false);
> }
>
> static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
> @@ -1105,10 +1116,6 @@ static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
>
> imx219->streaming = enable;
>
> - /* vflip and hflip cannot change during streaming */
> - __v4l2_ctrl_grab(imx219->vflip, enable);
> - __v4l2_ctrl_grab(imx219->hflip, enable);
> -
> mutex_unlock(&imx219->mutex);
>
> return ret;
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 2/2] media: i2c: imx219: Balance runtime PM use-count
2021-03-11 9:52 ` [PATCH v2 2/2] media: i2c: imx219: Balance runtime PM use-count Lad Prabhakar
@ 2021-03-15 0:03 ` Laurent Pinchart
0 siblings, 0 replies; 5+ messages in thread
From: Laurent Pinchart @ 2021-03-15 0:03 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Dave Stevenson, Mauro Carvalho Chehab, Pavel Machek,
Andrey Konovalov, Sakari Ailus, Jacopo Mondi, Hans Verkuil,
linux-media, linux-kernel, linux-renesas-soc, Prabhakar,
Biju Das
Hi Prabhakar,
Thank you for the patch.
On Thu, Mar 11, 2021 at 09:52:05AM +0000, Lad Prabhakar wrote:
> Move incrementing/decrementing runtime PM count to
> imx219_start_streaming()/imx219_stop_streaming() functions respectively.
>
> This fixes an issue of unbalanced runtime PM count in resume callback
> error path where streaming is stopped and runtime PM count is left
> unbalanced.
>
> Fixes: 1283b3b8f82b9 ("media: i2c: Add driver for Sony IMX219 sensor")
> Reported-by: Pavel Machek <pavel@denx.de>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> drivers/media/i2c/imx219.c | 32 +++++++++++++++++---------------
> 1 file changed, 17 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
> index 82756cbfbaac..49ba39418360 100644
> --- a/drivers/media/i2c/imx219.c
> +++ b/drivers/media/i2c/imx219.c
> @@ -1035,37 +1035,47 @@ static int imx219_start_streaming(struct imx219 *imx219)
> const struct imx219_reg_list *reg_list;
> int ret;
>
> + ret = pm_runtime_get_sync(&client->dev);
> + if (ret < 0) {
> + pm_runtime_put_noidle(&client->dev);
> + return ret;
> + }
> +
> /* Apply default values of current mode */
> reg_list = &imx219->mode->reg_list;
> ret = imx219_write_regs(imx219, reg_list->regs, reg_list->num_of_regs);
> if (ret) {
> dev_err(&client->dev, "%s failed to set mode\n", __func__);
> - return ret;
> + goto err_rpm_put;
> }
>
> ret = imx219_set_framefmt(imx219);
> if (ret) {
> dev_err(&client->dev, "%s failed to set frame format: %d\n",
> __func__, ret);
> - return ret;
> + goto err_rpm_put;
> }
>
> /* Apply customized values from user */
> ret = __v4l2_ctrl_handler_setup(imx219->sd.ctrl_handler);
> if (ret)
> - return ret;
> + goto err_rpm_put;
>
> /* set stream on register */
> ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
> IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING);
> if (ret)
> - return ret;
> + goto err_rpm_put;
>
> /* vflip and hflip cannot change during streaming */
> __v4l2_ctrl_grab(imx219->vflip, true);
> __v4l2_ctrl_grab(imx219->hflip, true);
>
> return 0;
> +
> +err_rpm_put:
> + pm_runtime_put(&client->dev);
> + return ret;
> }
>
> static void imx219_stop_streaming(struct imx219 *imx219)
> @@ -1081,12 +1091,13 @@ static void imx219_stop_streaming(struct imx219 *imx219)
>
> __v4l2_ctrl_grab(imx219->vflip, false);
> __v4l2_ctrl_grab(imx219->hflip, false);
> +
> + pm_runtime_put(&client->dev);
> }
>
> static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
> {
> struct imx219 *imx219 = to_imx219(sd);
> - struct i2c_client *client = v4l2_get_subdevdata(sd);
> int ret = 0;
>
> mutex_lock(&imx219->mutex);
> @@ -1096,22 +1107,15 @@ static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
> }
>
> if (enable) {
> - ret = pm_runtime_get_sync(&client->dev);
> - if (ret < 0) {
> - pm_runtime_put_noidle(&client->dev);
> - goto err_unlock;
> - }
> -
> /*
> * Apply default & customized values
> * and then start streaming.
> */
> ret = imx219_start_streaming(imx219);
> if (ret)
> - goto err_rpm_put;
> + goto err_unlock;
> } else {
> imx219_stop_streaming(imx219);
> - pm_runtime_put(&client->dev);
> }
>
> imx219->streaming = enable;
> @@ -1120,8 +1124,6 @@ static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
>
> return ret;
>
> -err_rpm_put:
> - pm_runtime_put(&client->dev);
> err_unlock:
> mutex_unlock(&imx219->mutex);
>
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-03-15 0:05 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-11 9:52 [PATCH v2 0/2] media: i2c: imx219: Trivial Fixes Lad Prabhakar
2021-03-11 9:52 ` [PATCH v2 1/2] media: i2c: imx219: Move out locking/unlocking of vflip and hflip controls from imx219_set_stream Lad Prabhakar
2021-03-15 0:02 ` Laurent Pinchart
2021-03-11 9:52 ` [PATCH v2 2/2] media: i2c: imx219: Balance runtime PM use-count Lad Prabhakar
2021-03-15 0:03 ` Laurent Pinchart
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).