[PATCH 5.4 00/73] 5.4.114-rc1 review

[PATCH 5.4 00/73] 5.4.114-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.114 release.
There are 73 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 21 Apr 2021 13:05:09 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.114-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.114-rc1

Pali Rohár <pali@kernel.org>
    net: phy: marvell: fix detection of PHY on Topaz switches

Fredrik Strupe <fredrik@strupe.net>
    ARM: 9071/1: uprobes: Don't hook on thumb instructions

Heiner Kallweit <hkallweit1@gmail.com>
    r8169: don't advertise pause in jumbo mode

Heiner Kallweit <hkallweit1@gmail.com>
    r8169: tweak max read request size for newer chips also in jumbo mtu mode

Heiner Kallweit <hkallweit1@gmail.com>
    r8169: improve rtl_jumbo_config

Heiner Kallweit <hkallweit1@gmail.com>
    r8169: fix performance regression related to PCIe max read request size

Heiner Kallweit <hkallweit1@gmail.com>
    r8169: simplify setting PCI_EXP_DEVCTL_NOSNOOP_EN

Heiner Kallweit <hkallweit1@gmail.com>
    r8169: remove fiddling with the PCIe max read request size

Andre Przywara <andre.przywara@arm.com>
    arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems

Russell King <rmk+kernel@armlinux.org.uk>
    ARM: footbridge: fix PCI interrupt mapping

Eric Dumazet <edumazet@google.com>
    gro: ensure frag0 meets IP header alignment

Lijun Pan <lijunp213@gmail.com>
    ibmvnic: remove duplicate napi_schedule call in open function

Lijun Pan <lijunp213@gmail.com>
    ibmvnic: remove duplicate napi_schedule call in do_reset function

Lijun Pan <lijunp213@gmail.com>
    ibmvnic: avoid calling napi_disable() twice

Jason Xing <xingwanli@kuaishou.com>
    i40e: fix the panic when running bpf in xdpdrv mode

Hristo Venev <hristo@venev.name>
    net: ip6_tunnel: Unregister catch-all devices

Hristo Venev <hristo@venev.name>
    net: sit: Unregister catch-all devices

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    net: davicom: Fix regulator not turned off on failed probe

Eric Dumazet <edumazet@google.com>
    netfilter: nft_limit: avoid possible divide error in nft_limit_init

Claudiu Beznea <claudiu.beznea@microchip.com>
    net: macb: fix the restore of cmp registers

Florian Westphal <fw@strlen.de>
    netfilter: arp_tables: add pre_exit hook for table unregister

Florian Westphal <fw@strlen.de>
    netfilter: bridge: add pre_exit hooks for ebtable unregistration

Vaibhav Jain <vaibhav@linux.ibm.com>
    libnvdimm/region: Fix nvdimm_has_flush() to handle ND_REGION_ASYNC

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: conntrack: do not print icmpv6 as unknown via /proc

Jolly Shah <jollys@google.com>
    scsi: libsas: Reset num_scatter if libata marks qc as NODATA

Kefeng Wang <wangkefeng.wang@huawei.com>
    riscv: Fix spelling mistake "SPARSEMEM" to "SPARSMEM"

Christian A. Ehrhardt <lk@c--e.de>
    vfio/pci: Add missing range check in vfio_pci_mmap

Nathan Chancellor <nathan@kernel.org>
    arm64: alternatives: Move length validation in alternative_{insn, endif}

Peter Collingbourne <pcc@google.com>
    arm64: fix inline asm in load_unaligned_zeropad()

Linus Torvalds <torvalds@linux-foundation.org>
    readdir: make sure to verify directory entry for legacy interfaces too

Jaegeuk Kim <jaegeuk@kernel.org>
    dm verity fec: fix misaligned RS roots IO

Ping Cheng <pinglinux@gmail.com>
    HID: wacom: set EV_KEY and EV_ABS only for non-HID_GENERIC type of devices

Arnd Bergmann <arnd@arndb.de>
    Input: i8042 - fix Pegatron C15B ID entry

Caleb Connolly <caleb@connolly.tech>
    Input: s6sy761 - fix coordinate read bit shift

A. Cody Schuffelen <schuffelen@google.com>
    virt_wifi: Return micros for BSS TSF values

Seevalamuthu Mariappan <seevalam@codeaurora.org>
    mac80211: clear sta->fast_rx when STA removed from 4-addr VLAN

Zheng Yongjun <zhengyongjun3@huawei.com>
    net: tipc: Fix spelling errors in net/tipc module

Aditya Pakki <pakki001@umn.edu>
    net/rds: Avoid potential use after free in rds_send_remove_from_sock

Guenter Roeck <linux@roeck-us.net>
    pcnet32: Use pci_resource_len to validate PCI resource

Alexander Aring <aahringo@redhat.com>
    net: ieee802154: forbid monitor for add llsec seclevel

Alexander Aring <aahringo@redhat.com>
    net: ieee802154: stop dump llsec seclevels for monitors

Alexander Aring <aahringo@redhat.com>
    net: ieee802154: forbid monitor for del llsec devkey

Alexander Aring <aahringo@redhat.com>
    net: ieee802154: forbid monitor for add llsec devkey

Alexander Aring <aahringo@redhat.com>
    net: ieee802154: stop dump llsec devkeys for monitors

Alexander Aring <aahringo@redhat.com>
    net: ieee802154: forbid monitor for del llsec dev

Alexander Aring <aahringo@redhat.com>
    net: ieee802154: forbid monitor for add llsec dev

Alexander Aring <aahringo@redhat.com>
    net: ieee802154: stop dump llsec devs for monitors

Alexander Aring <aahringo@redhat.com>
    net: ieee802154: forbid monitor for del llsec key

Alexander Aring <aahringo@redhat.com>
    net: ieee802154: forbid monitor for add llsec key

Alexander Aring <aahringo@redhat.com>
    net: ieee802154: stop dump llsec keys for monitors

Martin Wilck <mwilck@suse.com>
    scsi: scsi_transport_srp: Don't block target in SRP_PORT_LOST state

Alexander Shiyan <shc_work@mail.ru>
    ASoC: fsl_esai: Fix TDM slot setup for I2S mode

Rob Clark <robdclark@chromium.org>
    drm/msm: Fix a5xx/a6xx timestamps

Arnd Bergmann <arnd@arndb.de>
    ARM: omap1: fix building with clang IAS

Arnd Bergmann <arnd@arndb.de>
    ARM: keystone: fix integer overflow warning

Tong Zhu <zhutong@amazon.com>
    neighbour: Disregard DEAD dst in neigh_update

Ryan Lee <ryans.lee@maximintegrated.com>
    ASoC: max98373: Added 30ms turn on/off time delay

Wang Qing <wangqing@vivo.com>
    arc: kernel: Return -EFAULT if copy_to_user() fails

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    lockdep: Add a missing initialization hint to the "INFO: Trying to register non-static key" message

Tony Lindgren <tony@atomide.com>
    ARM: dts: Fix moving mmc devices with aliases for omap4 & 5

Tony Lindgren <tony@atomide.com>
    ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    dmaengine: dw: Make it dependent to HAS_IOMEM

Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
    gpio: sysfs: Obey valid_mask

Fabian Vogt <fabian@ritter-vogt.de>
    Input: nspire-keypad - enable interrupts only when opened

Or Cohen <orcohen@paloaltonetworks.com>
    net/sctp: fix race condition in sctp_destroy_sock

Quinn Tran <qutran@marvell.com>
    scsi: qla2xxx: Fix fabric scan hang

Quinn Tran <qutran@marvell.com>
    scsi: qla2xxx: Fix stuck login session using prli_pend_timer

Shyam Sundar <ssundar@marvell.com>
    scsi: qla2xxx: Add a shadow variable to hold disc_state history of fcport

Quinn Tran <qutran@marvell.com>
    scsi: qla2xxx: Retry PLOGI on FC-NVMe PRLI failure

Arun Easi <aeasi@marvell.com>
    scsi: qla2xxx: Fix device connect issues in P2P configuration

Michael Hernandez <mhernandez@marvell.com>
    scsi: qla2xxx: Dual FCP-NVMe target port support

Sasha Levin <sashal@kernel.org>
    Revert "scsi: qla2xxx: Fix stuck login session using prli_pend_timer"

Sasha Levin <sashal@kernel.org>
    Revert "scsi: qla2xxx: Retry PLOGI on FC-NVMe PRLI failure"


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arc/kernel/signal.c                           |   4 +-
 arch/arm/boot/dts/omap4.dtsi                       |   5 +
 arch/arm/boot/dts/omap44xx-clocks.dtsi             |   8 --
 arch/arm/boot/dts/omap5.dtsi                       |   5 +
 arch/arm/mach-footbridge/cats-pci.c                |   4 +-
 arch/arm/mach-footbridge/ebsa285-pci.c             |   4 +-
 arch/arm/mach-footbridge/netwinder-pci.c           |   2 +-
 arch/arm/mach-footbridge/personal-pci.c            |   5 +-
 arch/arm/mach-keystone/keystone.c                  |   4 +-
 arch/arm/mach-omap1/ams-delta-fiq-handler.S        |   1 +
 arch/arm/probes/uprobes/core.c                     |   4 +-
 .../boot/dts/allwinner/sun50i-a64-pine64-lts.dts   |   4 +
 .../boot/dts/allwinner/sun50i-a64-sopine.dtsi      |   2 +-
 arch/arm64/include/asm/alternative.h               |   8 +-
 arch/arm64/include/asm/word-at-a-time.h            |  10 +-
 arch/riscv/Kconfig                                 |   2 +-
 drivers/dma/dw/Kconfig                             |   2 +
 drivers/gpio/gpiolib-sysfs.c                       |   8 ++
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c              |   4 +-
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c              |   4 +-
 drivers/hid/wacom_wac.c                            |   6 +-
 drivers/input/keyboard/nspire-keypad.c             |  56 ++++----
 drivers/input/serio/i8042-x86ia64io.h              |   1 +
 drivers/input/touchscreen/s6sy761.c                |   4 +-
 drivers/md/dm-verity-fec.c                         |  11 +-
 drivers/md/dm-verity-fec.h                         |   1 +
 drivers/net/dsa/mv88e6xxx/chip.c                   |  30 ++---
 drivers/net/ethernet/amd/pcnet32.c                 |   5 +-
 drivers/net/ethernet/cadence/macb_main.c           |   2 +-
 drivers/net/ethernet/davicom/dm9000.c              |   6 +-
 drivers/net/ethernet/ibm/ibmvnic.c                 |  14 +-
 drivers/net/ethernet/intel/i40e/i40e_main.c        |   6 +
 drivers/net/ethernet/realtek/r8169_main.c          | 141 +++++++--------------
 drivers/net/phy/marvell.c                          |  29 ++++-
 drivers/net/wireless/virt_wifi.c                   |   5 +-
 drivers/nvdimm/region_devs.c                       |   9 +-
 drivers/scsi/libsas/sas_ata.c                      |   9 +-
 drivers/scsi/qla2xxx/qla_dbg.c                     |   2 +-
 drivers/scsi/qla2xxx/qla_def.h                     |  40 +++++-
 drivers/scsi/qla2xxx/qla_fw.h                      |   2 +
 drivers/scsi/qla2xxx/qla_gbl.h                     |   3 +
 drivers/scsi/qla2xxx/qla_gs.c                      |  44 ++++---
 drivers/scsi/qla2xxx/qla_init.c                    | 133 +++++++++++--------
 drivers/scsi/qla2xxx/qla_inline.h                  |  36 ++++++
 drivers/scsi/qla2xxx/qla_iocb.c                    |  53 ++++++--
 drivers/scsi/qla2xxx/qla_mbx.c                     |  11 +-
 drivers/scsi/qla2xxx/qla_os.c                      |  19 ++-
 drivers/scsi/qla2xxx/qla_target.c                  |  11 +-
 drivers/scsi/scsi_transport_srp.c                  |   2 +-
 drivers/vfio/pci/vfio_pci.c                        |   4 +-
 fs/readdir.c                                       |   6 +
 include/linux/marvell_phy.h                        |   5 +-
 include/linux/netfilter_arp/arp_tables.h           |   5 +-
 include/linux/netfilter_bridge/ebtables.h          |   5 +-
 kernel/locking/lockdep.c                           |   3 +-
 net/bridge/netfilter/ebtable_broute.c              |   8 +-
 net/bridge/netfilter/ebtable_filter.c              |   8 +-
 net/bridge/netfilter/ebtable_nat.c                 |   8 +-
 net/bridge/netfilter/ebtables.c                    |  30 ++++-
 net/core/dev.c                                     |   3 +-
 net/core/neighbour.c                               |   2 +-
 net/ieee802154/nl802154.c                          |  41 ++++++
 net/ipv4/netfilter/arp_tables.c                    |   9 +-
 net/ipv4/netfilter/arptable_filter.c               |  10 +-
 net/ipv6/ip6_tunnel.c                              |  10 ++
 net/ipv6/sit.c                                     |   4 +-
 net/mac80211/cfg.c                                 |   4 +-
 net/netfilter/nf_conntrack_standalone.c            |   1 +
 net/netfilter/nft_limit.c                          |   4 +-
 net/rds/message.c                                  |   1 +
 net/rds/send.c                                     |   2 +-
 net/sctp/socket.c                                  |  13 +-
 net/tipc/bearer.h                                  |   6 +-
 net/tipc/net.c                                     |   2 +-
 net/tipc/node.c                                    |   2 +-
 sound/soc/codecs/max98373.c                        |   2 +
 sound/soc/fsl/fsl_esai.c                           |   8 +-
 78 files changed, 625 insertions(+), 366 deletions(-)

[PATCH 5.4 01/73] Revert "scsi: qla2xxx: Retry PLOGI on FC-NVMe PRLI failure"

[Greg Kroah-Hartman]

This reverts commit 74924e407bf74667b07430f785a104371be097af.

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_init.c | 28 ++++++++++++++++++++++++----
 drivers/scsi/qla2xxx/qla_iocb.c |  6 +-----
 2 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index b300e1109582..05a22fb17e52 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1921,13 +1921,33 @@ qla24xx_handle_prli_done_event(struct scsi_qla_host *vha, struct event_arg *ea)
 				"%s %d %8phC post fc4 prli\n",
 				__func__, __LINE__, ea->fcport->port_name);
 			ea->fcport->fc4f_nvme = 0;
+			qla24xx_post_prli_work(vha, ea->fcport);
 			return;
 		}
 
-		ea->fcport->flags &= ~FCF_ASYNC_SENT;
-		ea->fcport->keep_nport_handle = 0;
-		ea->fcport->logout_on_delete = 1;
-		qlt_schedule_sess_for_deletion(ea->fcport);
+		/* at this point both PRLI NVME & PRLI FCP failed */
+		if (N2N_TOPO(vha->hw)) {
+			if (ea->fcport->n2n_link_reset_cnt < 3) {
+				ea->fcport->n2n_link_reset_cnt++;
+				/*
+				 * remote port is not sending Plogi. Reset
+				 * link to kick start his state machine
+				 */
+				set_bit(N2N_LINK_RESET, &vha->dpc_flags);
+			} else {
+				ql_log(ql_log_warn, vha, 0x2119,
+				    "%s %d %8phC Unable to reconnect\n",
+				    __func__, __LINE__, ea->fcport->port_name);
+			}
+		} else {
+			/*
+			 * switch connect. login failed. Take connection
+			 * down and allow relogin to retrigger
+			 */
+			ea->fcport->flags &= ~FCF_ASYNC_SENT;
+			ea->fcport->keep_nport_handle = 0;
+			qlt_schedule_sess_for_deletion(ea->fcport);
+		}
 		break;
 	}
 }
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index aed4ce66e6cf..2e272fc858ed 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2773,7 +2773,6 @@ static void qla2x00_els_dcmd2_sp_done(srb_t *sp, int res)
 			ea.sp = sp;
 			qla24xx_handle_plogi_done_event(vha, &ea);
 			break;
-
 		case CS_IOCB_ERROR:
 			switch (fw_status[1]) {
 			case LSC_SCODE_PORTID_USED:
@@ -2844,7 +2843,6 @@ static void qla2x00_els_dcmd2_sp_done(srb_t *sp, int res)
 				    fw_status[0], fw_status[1], fw_status[2]);
 
 				fcport->flags &= ~FCF_ASYNC_SENT;
-				fcport->disc_state = DSC_LOGIN_FAILED;
 				set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 				break;
 			}
@@ -2857,7 +2855,6 @@ static void qla2x00_els_dcmd2_sp_done(srb_t *sp, int res)
 			    fw_status[0], fw_status[1], fw_status[2]);
 
 			sp->fcport->flags &= ~FCF_ASYNC_SENT;
-			sp->fcport->disc_state = DSC_LOGIN_FAILED;
 			set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 			break;
 		}
@@ -2893,12 +2890,11 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *vha, int els_opcode,
 		return -ENOMEM;
 	}
 
-	fcport->flags |= FCF_ASYNC_SENT;
-	fcport->disc_state = DSC_LOGIN_PEND;
 	elsio = &sp->u.iocb_cmd;
 	ql_dbg(ql_dbg_io, vha, 0x3073,
 	    "Enter: PLOGI portid=%06x\n", fcport->d_id.b24);
 
+	fcport->flags |= FCF_ASYNC_SENT;
 	sp->type = SRB_ELS_DCMD;
 	sp->name = "ELS_DCMD";
 	sp->fcport = fcport;
-- 
2.30.2

[PATCH 5.4 02/73] Revert "scsi: qla2xxx: Fix stuck login session using prli_pend_timer"

[Greg Kroah-Hartman]

This reverts commit 0b84591fdd5ea3ca0d93aaea489353f0381832c0.

Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_def.h    |  5 -----
 drivers/scsi/qla2xxx/qla_init.c   | 34 ++++++++-----------------------
 drivers/scsi/qla2xxx/qla_target.c |  1 -
 3 files changed, 8 insertions(+), 32 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index c57b95a20688..1eb3fe281cc3 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2402,7 +2402,6 @@ typedef struct fc_port {
 	unsigned int scan_needed:1;
 	unsigned int n2n_flag:1;
 	unsigned int explicit_logout:1;
-	unsigned int prli_pend_timer:1;
 
 	struct completion nvme_del_done;
 	uint32_t nvme_prli_service_param;
@@ -2429,7 +2428,6 @@ typedef struct fc_port {
 	struct work_struct free_work;
 	struct work_struct reg_work;
 	uint64_t jiffies_at_registration;
-	unsigned long prli_expired;
 	struct qlt_plogi_ack_t *plogi_link[QLT_PLOGI_LINK_MAX];
 
 	uint16_t tgt_id;
@@ -4823,9 +4821,6 @@ struct sff_8247_a0 {
 	 ha->current_topology == ISP_CFG_N || \
 	 !ha->current_topology)
 
-#define PRLI_PHASE(_cls) \
-	((_cls == DSC_LS_PRLI_PEND) || (_cls == DSC_LS_PRLI_COMP))
-
 #include "qla_target.h"
 #include "qla_gbl.h"
 #include "qla_dbg.h"
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 05a22fb17e52..5305c914b0a4 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -696,7 +696,7 @@ static void qla24xx_handle_gnl_done_event(scsi_qla_host_t *vha,
 	port_id_t id;
 	u64 wwn;
 	u16 data[2];
-	u8 current_login_state, nvme_cls;
+	u8 current_login_state;
 
 	fcport = ea->fcport;
 	ql_dbg(ql_dbg_disc, vha, 0xffff,
@@ -755,17 +755,10 @@ static void qla24xx_handle_gnl_done_event(scsi_qla_host_t *vha,
 
 		loop_id = le16_to_cpu(e->nport_handle);
 		loop_id = (loop_id & 0x7fff);
-		nvme_cls = e->current_login_state >> 4;
-		current_login_state = e->current_login_state & 0xf;
-
-		if (PRLI_PHASE(nvme_cls)) {
-			current_login_state = nvme_cls;
-			fcport->fc4_type &= ~FS_FC4TYPE_FCP;
-			fcport->fc4_type |= FS_FC4TYPE_NVME;
-		} else if (PRLI_PHASE(current_login_state)) {
-			fcport->fc4_type |= FS_FC4TYPE_FCP;
-			fcport->fc4_type &= ~FS_FC4TYPE_NVME;
-		}
+		if  (fcport->fc4f_nvme)
+			current_login_state = e->current_login_state >> 4;
+		else
+			current_login_state = e->current_login_state & 0xf;
 
 
 		ql_dbg(ql_dbg_disc, vha, 0x20e2,
@@ -1246,19 +1239,12 @@ qla24xx_async_prli(struct scsi_qla_host *vha, fc_port_t *fcport)
 	struct srb_iocb *lio;
 	int rval = QLA_FUNCTION_FAILED;
 
-	if (!vha->flags.online) {
-		ql_dbg(ql_dbg_disc, vha, 0xffff, "%s %d %8phC exit\n",
-		    __func__, __LINE__, fcport->port_name);
+	if (!vha->flags.online)
 		return rval;
-	}
 
-	if ((fcport->fw_login_state == DSC_LS_PLOGI_PEND ||
-	    fcport->fw_login_state == DSC_LS_PRLI_PEND) &&
-	    qla_dual_mode_enabled(vha)) {
-		ql_dbg(ql_dbg_disc, vha, 0xffff, "%s %d %8phC exit\n",
-		    __func__, __LINE__, fcport->port_name);
+	if (fcport->fw_login_state == DSC_LS_PLOGI_PEND ||
+	    fcport->fw_login_state == DSC_LS_PRLI_PEND)
 		return rval;
-	}
 
 	sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
 	if (!sp)
@@ -1636,10 +1622,6 @@ int qla24xx_fcport_handle_login(struct scsi_qla_host *vha, fc_port_t *fcport)
 			break;
 		default:
 			if (fcport->login_pause) {
-				ql_dbg(ql_dbg_disc, vha, 0x20d8,
-				    "%s %d %8phC exit\n",
-				    __func__, __LINE__,
-				    fcport->port_name);
 				fcport->last_rscn_gen = fcport->rscn_gen;
 				fcport->last_login_gen = fcport->login_gen;
 				set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 8fd0a568303b..5dbdae1f65af 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -1267,7 +1267,6 @@ void qlt_schedule_sess_for_deletion(struct fc_port *sess)
 	sess->deleted = QLA_SESS_DELETION_IN_PROGRESS;
 	spin_unlock_irqrestore(&sess->vha->work_lock, flags);
 
-	sess->prli_pend_timer = 0;
 	sess->disc_state = DSC_DELETE_PEND;
 
 	qla24xx_chk_fcp_state(sess);
-- 
2.30.2

[PATCH 5.4 03/73] scsi: qla2xxx: Dual FCP-NVMe target port support

[Greg Kroah-Hartman]

From: Michael Hernandez <mhernandez@marvell.com>

[ Upstream commit 84ed362ac40ca44dbbbebf767301463aa72bc797 ]

Some storage arrays advertise FCP LUNs and NVMe namespaces behind the same
WWN.  The driver now offers a user option by way of NVRAM parameter to
allow users to choose, on a per port basis, the kind of FC-4 type they
would like to prioritize for login.

Link: https://lore.kernel.org/r/20190912180918.6436-9-hmadhani@marvell.com
Signed-off-by: Michael Hernandez <mhernandez@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_def.h    | 26 ++++++++++++-
 drivers/scsi/qla2xxx/qla_fw.h     |  2 +
 drivers/scsi/qla2xxx/qla_gs.c     | 42 ++++++++++++--------
 drivers/scsi/qla2xxx/qla_init.c   | 64 ++++++++++++++++++-------------
 drivers/scsi/qla2xxx/qla_inline.h | 12 ++++++
 drivers/scsi/qla2xxx/qla_mbx.c    | 11 +++---
 drivers/scsi/qla2xxx/qla_os.c     | 17 ++++----
 7 files changed, 114 insertions(+), 60 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 1eb3fe281cc3..894c2716b7ce 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2281,7 +2281,7 @@ typedef struct {
 	uint8_t fabric_port_name[WWN_SIZE];
 	uint16_t fp_speed;
 	uint8_t fc4_type;
-	uint8_t fc4f_nvme;	/* nvme fc4 feature bits */
+	uint8_t fc4_features;
 } sw_info_t;
 
 /* FCP-4 types */
@@ -2450,7 +2450,7 @@ typedef struct fc_port {
 	u32 supported_classes;
 
 	uint8_t fc4_type;
-	uint8_t	fc4f_nvme;
+	uint8_t fc4_features;
 	uint8_t scan_state;
 
 	unsigned long last_queue_full;
@@ -2481,6 +2481,9 @@ typedef struct fc_port {
 	u16 n2n_chip_reset;
 } fc_port_t;
 
+#define FC4_PRIORITY_NVME	0
+#define FC4_PRIORITY_FCP	1
+
 #define QLA_FCPORT_SCAN		1
 #define QLA_FCPORT_FOUND	2
 
@@ -4296,6 +4299,8 @@ struct qla_hw_data {
 	atomic_t        nvme_active_aen_cnt;
 	uint16_t        nvme_last_rptd_aen;             /* Last recorded aen count */
 
+	uint8_t fc4_type_priority;
+
 	atomic_t zio_threshold;
 	uint16_t last_zio_threshold;
 
@@ -4821,6 +4826,23 @@ struct sff_8247_a0 {
 	 ha->current_topology == ISP_CFG_N || \
 	 !ha->current_topology)
 
+#define NVME_TYPE(fcport) \
+	(fcport->fc4_type & FS_FC4TYPE_NVME) \
+
+#define FCP_TYPE(fcport) \
+	(fcport->fc4_type & FS_FC4TYPE_FCP) \
+
+#define NVME_ONLY_TARGET(fcport) \
+	(NVME_TYPE(fcport) && !FCP_TYPE(fcport))  \
+
+#define NVME_FCP_TARGET(fcport) \
+	(FCP_TYPE(fcport) && NVME_TYPE(fcport)) \
+
+#define NVME_TARGET(ha, fcport) \
+	((NVME_FCP_TARGET(fcport) && \
+	(ha->fc4_type_priority == FC4_PRIORITY_NVME)) || \
+	NVME_ONLY_TARGET(fcport)) \
+
 #include "qla_target.h"
 #include "qla_gbl.h"
 #include "qla_dbg.h"
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index dc2366a29665..9dc09c117416 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -2105,4 +2105,6 @@ struct qla_fcp_prio_cfg {
 #define FA_FLASH_LAYOUT_ADDR_83	(0x3F1000/4)
 #define FA_FLASH_LAYOUT_ADDR_28	(0x11000/4)
 
+#define NVRAM_DUAL_FCP_NVME_FLAG_OFFSET	0x196
+
 #endif
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index fc6e12fb7d77..ae13aabf280b 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -248,7 +248,7 @@ qla2x00_ga_nxt(scsi_qla_host_t *vha, fc_port_t *fcport)
 		    WWN_SIZE);
 
 		fcport->fc4_type = (ct_rsp->rsp.ga_nxt.fc4_types[2] & BIT_0) ?
-		    FC4_TYPE_FCP_SCSI : FC4_TYPE_OTHER;
+		    FS_FC4TYPE_FCP : FC4_TYPE_OTHER;
 
 		if (ct_rsp->rsp.ga_nxt.port_type != NS_N_PORT_TYPE &&
 		    ct_rsp->rsp.ga_nxt.port_type != NS_NL_PORT_TYPE)
@@ -2887,7 +2887,7 @@ qla2x00_gff_id(scsi_qla_host_t *vha, sw_info_t *list)
 	struct ct_sns_req	*ct_req;
 	struct ct_sns_rsp	*ct_rsp;
 	struct qla_hw_data *ha = vha->hw;
-	uint8_t fcp_scsi_features = 0;
+	uint8_t fcp_scsi_features = 0, nvme_features = 0;
 	struct ct_arg arg;
 
 	for (i = 0; i < ha->max_fibre_devices; i++) {
@@ -2933,14 +2933,19 @@ qla2x00_gff_id(scsi_qla_host_t *vha, sw_info_t *list)
 			   ct_rsp->rsp.gff_id.fc4_features[GFF_FCP_SCSI_OFFSET];
 			fcp_scsi_features &= 0x0f;
 
-			if (fcp_scsi_features)
-				list[i].fc4_type = FC4_TYPE_FCP_SCSI;
-			else
-				list[i].fc4_type = FC4_TYPE_OTHER;
+			if (fcp_scsi_features) {
+				list[i].fc4_type = FS_FC4TYPE_FCP;
+				list[i].fc4_features = fcp_scsi_features;
+			}
 
-			list[i].fc4f_nvme =
+			nvme_features =
 			    ct_rsp->rsp.gff_id.fc4_features[GFF_NVME_OFFSET];
-			list[i].fc4f_nvme &= 0xf;
+			nvme_features &= 0xf;
+
+			if (nvme_features) {
+				list[i].fc4_type |= FS_FC4TYPE_NVME;
+				list[i].fc4_features = nvme_features;
+			}
 		}
 
 		/* Last device exit. */
@@ -3435,6 +3440,8 @@ void qla24xx_async_gffid_sp_done(srb_t *sp, int res)
 	fc_port_t *fcport = sp->fcport;
 	struct ct_sns_rsp *ct_rsp;
 	struct event_arg ea;
+	uint8_t fc4_scsi_feat;
+	uint8_t fc4_nvme_feat;
 
 	ql_dbg(ql_dbg_disc, vha, 0x2133,
 	       "Async done-%s res %x ID %x. %8phC\n",
@@ -3442,24 +3449,25 @@ void qla24xx_async_gffid_sp_done(srb_t *sp, int res)
 
 	fcport->flags &= ~FCF_ASYNC_SENT;
 	ct_rsp = &fcport->ct_desc.ct_sns->p.rsp;
+	fc4_scsi_feat = ct_rsp->rsp.gff_id.fc4_features[GFF_FCP_SCSI_OFFSET];
+	fc4_nvme_feat = ct_rsp->rsp.gff_id.fc4_features[GFF_NVME_OFFSET];
+
 	/*
 	 * FC-GS-7, 5.2.3.12 FC-4 Features - format
 	 * The format of the FC-4 Features object, as defined by the FC-4,
 	 * Shall be an array of 4-bit values, one for each type code value
 	 */
 	if (!res) {
-		if (ct_rsp->rsp.gff_id.fc4_features[GFF_FCP_SCSI_OFFSET] & 0xf) {
+		if (fc4_scsi_feat & 0xf) {
 			/* w1 b00:03 */
-			fcport->fc4_type =
-			    ct_rsp->rsp.gff_id.fc4_features[GFF_FCP_SCSI_OFFSET];
-			fcport->fc4_type &= 0xf;
-	       }
+			fcport->fc4_type = FS_FC4TYPE_FCP;
+			fcport->fc4_features = fc4_scsi_feat & 0xf;
+		}
 
-		if (ct_rsp->rsp.gff_id.fc4_features[GFF_NVME_OFFSET] & 0xf) {
+		if (fc4_nvme_feat & 0xf) {
 			/* w5 [00:03]/28h */
-			fcport->fc4f_nvme =
-			    ct_rsp->rsp.gff_id.fc4_features[GFF_NVME_OFFSET];
-			fcport->fc4f_nvme &= 0xf;
+			fcport->fc4_type |= FS_FC4TYPE_NVME;
+			fcport->fc4_features = fc4_nvme_feat & 0xf;
 		}
 	}
 
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 5305c914b0a4..bc7460da394f 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -356,7 +356,7 @@ qla2x00_async_login(struct scsi_qla_host *vha, fc_port_t *fcport,
 	else
 		lio->u.logio.flags |= SRB_LOGIN_COND_PLOGI;
 
-	if (fcport->fc4f_nvme)
+	if (NVME_TARGET(vha->hw, fcport))
 		lio->u.logio.flags |= SRB_LOGIN_SKIP_PRLI;
 
 	ql_dbg(ql_dbg_disc, vha, 0x2072,
@@ -755,19 +755,17 @@ static void qla24xx_handle_gnl_done_event(scsi_qla_host_t *vha,
 
 		loop_id = le16_to_cpu(e->nport_handle);
 		loop_id = (loop_id & 0x7fff);
-		if  (fcport->fc4f_nvme)
+		if (NVME_TARGET(vha->hw, fcport))
 			current_login_state = e->current_login_state >> 4;
 		else
 			current_login_state = e->current_login_state & 0xf;
 
-
 		ql_dbg(ql_dbg_disc, vha, 0x20e2,
-		    "%s found %8phC CLS [%x|%x] nvme %d ID[%02x%02x%02x|%02x%02x%02x] lid[%d|%d]\n",
+		    "%s found %8phC CLS [%x|%x] fc4_type %d ID[%06x|%06x] lid[%d|%d]\n",
 		    __func__, fcport->port_name,
 		    e->current_login_state, fcport->fw_login_state,
-		    fcport->fc4f_nvme, id.b.domain, id.b.area, id.b.al_pa,
-		    fcport->d_id.b.domain, fcport->d_id.b.area,
-		    fcport->d_id.b.al_pa, loop_id, fcport->loop_id);
+		    fcport->fc4_type, id.b24, fcport->d_id.b24,
+		    loop_id, fcport->loop_id);
 
 		switch (fcport->disc_state) {
 		case DSC_DELETE_PEND:
@@ -1263,13 +1261,13 @@ qla24xx_async_prli(struct scsi_qla_host *vha, fc_port_t *fcport)
 	sp->done = qla2x00_async_prli_sp_done;
 	lio->u.logio.flags = 0;
 
-	if  (fcport->fc4f_nvme)
+	if (NVME_TARGET(vha->hw, fcport))
 		lio->u.logio.flags |= SRB_LOGIN_NVME_PRLI;
 
 	ql_dbg(ql_dbg_disc, vha, 0x211b,
 	    "Async-prli - %8phC hdl=%x, loopid=%x portid=%06x retries=%d %s.\n",
 	    fcport->port_name, sp->handle, fcport->loop_id, fcport->d_id.b24,
-	    fcport->login_retry, fcport->fc4f_nvme ? "nvme" : "fc");
+	    fcport->login_retry, NVME_TARGET(vha->hw, fcport) ? "nvme" : "fc");
 
 	rval = qla2x00_start_sp(sp);
 	if (rval != QLA_SUCCESS) {
@@ -1420,14 +1418,14 @@ void qla24xx_handle_gpdb_event(scsi_qla_host_t *vha, struct event_arg *ea)
 	fcport->flags &= ~FCF_ASYNC_SENT;
 
 	ql_dbg(ql_dbg_disc, vha, 0x20d2,
-	    "%s %8phC DS %d LS %d nvme %x rc %d\n", __func__, fcport->port_name,
-	    fcport->disc_state, pd->current_login_state, fcport->fc4f_nvme,
-	    ea->rc);
+	    "%s %8phC DS %d LS %d fc4_type %x rc %d\n", __func__,
+	    fcport->port_name, fcport->disc_state, pd->current_login_state,
+	    fcport->fc4_type, ea->rc);
 
 	if (fcport->disc_state == DSC_DELETE_PEND)
 		return;
 
-	if (fcport->fc4f_nvme)
+	if (NVME_TARGET(vha->hw, fcport))
 		ls = pd->current_login_state >> 4;
 	else
 		ls = pd->current_login_state & 0xf;
@@ -1616,7 +1614,8 @@ int qla24xx_fcport_handle_login(struct scsi_qla_host *vha, fc_port_t *fcport)
 				ql_dbg(ql_dbg_disc, vha, 0x2118,
 				    "%s %d %8phC post %s PRLI\n",
 				    __func__, __LINE__, fcport->port_name,
-				    fcport->fc4f_nvme ? "NVME" : "FC");
+				    NVME_TARGET(vha->hw, fcport) ? "NVME" :
+				    "FC");
 				qla24xx_post_prli_work(vha, fcport);
 			}
 			break;
@@ -1898,13 +1897,22 @@ qla24xx_handle_prli_done_event(struct scsi_qla_host *vha, struct event_arg *ea)
 			break;
 		}
 
-		if (ea->fcport->fc4f_nvme) {
+		/*
+		 * Retry PRLI with other FC-4 type if failure occurred on dual
+		 * FCP/NVMe port
+		 */
+		if (NVME_FCP_TARGET(ea->fcport)) {
+			if (vha->hw->fc4_type_priority == FC4_PRIORITY_NVME)
+				ea->fcport->fc4_type &= ~FS_FC4TYPE_NVME;
+			else
+				ea->fcport->fc4_type &= ~FS_FC4TYPE_FCP;
 			ql_dbg(ql_dbg_disc, vha, 0x2118,
-				"%s %d %8phC post fc4 prli\n",
-				__func__, __LINE__, ea->fcport->port_name);
-			ea->fcport->fc4f_nvme = 0;
+				"%s %d %8phC post %s prli\n",
+				__func__, __LINE__, ea->fcport->port_name,
+				(ea->fcport->fc4_type & FS_FC4TYPE_NVME) ?
+				"NVMe" : "FCP");
 			qla24xx_post_prli_work(vha, ea->fcport);
-			return;
+			break;
 		}
 
 		/* at this point both PRLI NVME & PRLI FCP failed */
@@ -1990,7 +1998,7 @@ qla24xx_handle_plogi_done_event(struct scsi_qla_host *vha, struct event_arg *ea)
 		 * force a relogin attempt via implicit LOGO, PLOGI, and PRLI
 		 * requests.
 		 */
-		if (ea->fcport->fc4f_nvme) {
+		if (NVME_TARGET(vha->hw, ea->fcport)) {
 			ql_dbg(ql_dbg_disc, vha, 0x2117,
 				"%s %d %8phC post prli\n",
 				__func__, __LINE__, ea->fcport->port_name);
@@ -5415,7 +5423,7 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 
 	qla2x00_iidma_fcport(vha, fcport);
 
-	if (fcport->fc4f_nvme) {
+	if (NVME_TARGET(vha->hw, fcport)) {
 		qla_nvme_register_remote(vha, fcport);
 		fcport->disc_state = DSC_LOGIN_COMPLETE;
 		qla2x00_set_fcport_state(fcport, FCS_ONLINE);
@@ -5743,11 +5751,8 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha)
 				new_fcport->fc4_type = swl[swl_idx].fc4_type;
 
 				new_fcport->nvme_flag = 0;
-				new_fcport->fc4f_nvme = 0;
 				if (vha->flags.nvme_enabled &&
-				    swl[swl_idx].fc4f_nvme) {
-					new_fcport->fc4f_nvme =
-					    swl[swl_idx].fc4f_nvme;
+				    swl[swl_idx].fc4_type & FS_FC4TYPE_NVME) {
 					ql_log(ql_log_info, vha, 0x2131,
 					    "FOUND: NVME port %8phC as FC Type 28h\n",
 					    new_fcport->port_name);
@@ -5803,7 +5808,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha)
 
 		/* Bypass ports whose FCP-4 type is not FCP_SCSI */
 		if (ql2xgffidenable &&
-		    (new_fcport->fc4_type != FC4_TYPE_FCP_SCSI &&
+		    (!(new_fcport->fc4_type & FS_FC4TYPE_FCP) &&
 		    new_fcport->fc4_type != FC4_TYPE_UNKNOWN))
 			continue;
 
@@ -5872,7 +5877,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha)
 			break;
 		}
 
-		if (fcport->fc4f_nvme) {
+		if (NVME_TARGET(vha->hw, fcport)) {
 			if (fcport->disc_state == DSC_DELETE_PEND) {
 				fcport->disc_state = DSC_GNL;
 				vha->fcport_count--;
@@ -8547,6 +8552,11 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 	/* N2N: driver will initiate Login instead of FW */
 	icb->firmware_options_3 |= BIT_8;
 
+	/* Determine NVMe/FCP priority for target ports */
+	ha->fc4_type_priority = qla2xxx_get_fc4_priority(vha);
+	ql_log(ql_log_info, vha, 0xffff, "FC4 priority set to %s\n",
+	    ha->fc4_type_priority & BIT_0 ? "FCP" : "NVMe");
+
 	if (rval) {
 		ql_log(ql_log_warn, vha, 0x0076,
 		    "NVRAM configuration failed.\n");
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index 6dfde42d799b..af91e567a38d 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -312,3 +312,15 @@ qla_83xx_start_iocbs(struct qla_qpair *qpair)
 
 	WRT_REG_DWORD(req->req_q_in, req->ring_index);
 }
+
+static inline int
+qla2xxx_get_fc4_priority(struct scsi_qla_host *vha)
+{
+	uint32_t data;
+
+	data =
+	    ((uint8_t *)vha->hw->nvram)[NVRAM_DUAL_FCP_NVME_FLAG_OFFSET];
+
+
+	return ((data >> 6) & BIT_0);
+}
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index c1631e42d35d..098388a12feb 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1924,7 +1924,7 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt)
 		pd24 = (struct port_database_24xx *) pd;
 
 		/* Check for logged in state. */
-		if (fcport->fc4f_nvme) {
+		if (NVME_TARGET(ha, fcport)) {
 			current_login_state = pd24->current_login_state >> 4;
 			last_login_state = pd24->last_login_state >> 4;
 		} else {
@@ -3891,8 +3891,9 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 				fcport->scan_state = QLA_FCPORT_FOUND;
 				fcport->n2n_flag = 1;
 				fcport->keep_nport_handle = 1;
+				fcport->fc4_type = FS_FC4TYPE_FCP;
 				if (vha->flags.nvme_enabled)
-					fcport->fc4f_nvme = 1;
+					fcport->fc4_type |= FS_FC4TYPE_NVME;
 
 				switch (fcport->disc_state) {
 				case DSC_DELETED:
@@ -6350,7 +6351,7 @@ int __qla24xx_parse_gpdb(struct scsi_qla_host *vha, fc_port_t *fcport,
 	uint64_t zero = 0;
 	u8 current_login_state, last_login_state;
 
-	if (fcport->fc4f_nvme) {
+	if (NVME_TARGET(vha->hw, fcport)) {
 		current_login_state = pd->current_login_state >> 4;
 		last_login_state = pd->last_login_state >> 4;
 	} else {
@@ -6385,8 +6386,8 @@ int __qla24xx_parse_gpdb(struct scsi_qla_host *vha, fc_port_t *fcport,
 	fcport->d_id.b.al_pa = pd->port_id[2];
 	fcport->d_id.b.rsvd_1 = 0;
 
-	if (fcport->fc4f_nvme) {
-		fcport->port_type = 0;
+	if (NVME_TARGET(vha->hw, fcport)) {
+		fcport->port_type = FCT_NVME;
 		if ((pd->prli_svc_param_word_3[0] & BIT_5) == 0)
 			fcport->port_type |= FCT_NVME_INITIATOR;
 		if ((pd->prli_svc_param_word_3[0] & BIT_4) == 0)
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 67b1e74fcd1e..899dfb445710 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -5055,19 +5055,17 @@ void qla24xx_create_new_sess(struct scsi_qla_host *vha, struct qla_work_evt *e)
 			fcport->d_id = e->u.new_sess.id;
 			fcport->flags |= FCF_FABRIC_DEVICE;
 			fcport->fw_login_state = DSC_LS_PLOGI_PEND;
-			if (e->u.new_sess.fc4_type == FS_FC4TYPE_FCP)
-				fcport->fc4_type = FC4_TYPE_FCP_SCSI;
-
-			if (e->u.new_sess.fc4_type == FS_FC4TYPE_NVME) {
-				fcport->fc4_type = FC4_TYPE_OTHER;
-				fcport->fc4f_nvme = FC4_TYPE_NVME;
-			}
 
 			memcpy(fcport->port_name, e->u.new_sess.port_name,
 			    WWN_SIZE);
 
-			if (e->u.new_sess.fc4_type & FS_FCP_IS_N2N)
+			fcport->fc4_type = e->u.new_sess.fc4_type;
+			if (e->u.new_sess.fc4_type & FS_FCP_IS_N2N) {
+				fcport->fc4_type = FS_FC4TYPE_FCP;
 				fcport->n2n_flag = 1;
+				if (vha->flags.nvme_enabled)
+					fcport->fc4_type |= FS_FC4TYPE_NVME;
+			}
 
 		} else {
 			ql_dbg(ql_dbg_disc, vha, 0xffff,
@@ -5171,7 +5169,8 @@ void qla24xx_create_new_sess(struct scsi_qla_host *vha, struct qla_work_evt *e)
 				fcport->flags &= ~FCF_FABRIC_DEVICE;
 				fcport->keep_nport_handle = 1;
 				if (vha->flags.nvme_enabled) {
-					fcport->fc4f_nvme = 1;
+					fcport->fc4_type =
+					    (FS_FC4TYPE_NVME | FS_FC4TYPE_FCP);
 					fcport->n2n_flag = 1;
 				}
 				fcport->fw_login_state = 0;
-- 
2.30.2

[PATCH 5.4 04/73] scsi: qla2xxx: Fix device connect issues in P2P configuration

[Greg Kroah-Hartman]

From: Arun Easi <aeasi@marvell.com>

[ Upstream commit 65e9200938052ce90f24421bb057e1be1d6147c7 ]

P2P needs to take the alternate plogi route.

Link: https://lore.kernel.org/r/20191105150657.8092-8-hmadhani@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_gbl.h  | 1 +
 drivers/scsi/qla2xxx/qla_init.c | 9 +++++++++
 drivers/scsi/qla2xxx/qla_iocb.c | 5 ++---
 3 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index d11416dcee4e..5b163ad85c34 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -917,4 +917,5 @@ int qla2x00_set_data_rate(scsi_qla_host_t *vha, uint16_t mode);
 
 /* nvme.c */
 void qla_nvme_unregister_remote_port(struct fc_port *fcport);
+void qla_handle_els_plogi_done(scsi_qla_host_t *vha, struct event_arg *ea);
 #endif /* _QLA_GBL_H */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index bc7460da394f..633317651138 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1738,6 +1738,15 @@ void qla24xx_handle_relogin_event(scsi_qla_host_t *vha,
 	qla24xx_fcport_handle_login(vha, fcport);
 }
 
+void qla_handle_els_plogi_done(scsi_qla_host_t *vha,
+				      struct event_arg *ea)
+{
+	ql_dbg(ql_dbg_disc, vha, 0x2118,
+	    "%s %d %8phC post PRLI\n",
+	    __func__, __LINE__, ea->fcport->port_name);
+	qla24xx_post_prli_work(vha, ea->fcport);
+}
+
 /*
  * RSCN(s) came in for this fcport, but the RSCN(s) was not able
  * to be consumed by the fcport
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 2e272fc858ed..c0720c8e2f6d 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2769,9 +2769,8 @@ static void qla2x00_els_dcmd2_sp_done(srb_t *sp, int res)
 		case CS_COMPLETE:
 			memset(&ea, 0, sizeof(ea));
 			ea.fcport = fcport;
-			ea.data[0] = MBS_COMMAND_COMPLETE;
-			ea.sp = sp;
-			qla24xx_handle_plogi_done_event(vha, &ea);
+			ea.rc = res;
+			qla_handle_els_plogi_done(vha, &ea);
 			break;
 		case CS_IOCB_ERROR:
 			switch (fw_status[1]) {
-- 
2.30.2

[PATCH 5.4 05/73] scsi: qla2xxx: Retry PLOGI on FC-NVMe PRLI failure

[Greg Kroah-Hartman]

From: Quinn Tran <qutran@marvell.com>

[ Upstream commit 983f127603fac650fa34ee69db363e4615eaf9e7 ]

Current code will send PRLI with FC-NVMe bit set for the targets which
support only FCP. This may result into issue with targets which do not
understand NVMe and will go into a strange state. This patch would restart
the login process by going back to PLOGI state. The PLOGI state will force
the target to respond to correct PRLI request.

Fixes: c76ae845ea836 ("scsi: qla2xxx: Add error handling for PLOGI ELS passthrough")
Cc: stable@vger.kernel.org # 5.4
Link: https://lore.kernel.org/r/20191105150657.8092-2-hmadhani@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_init.c | 37 +++++++--------------------------
 drivers/scsi/qla2xxx/qla_iocb.c |  6 +++++-
 2 files changed, 13 insertions(+), 30 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 633317651138..5d2d0c287469 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1911,42 +1911,21 @@ qla24xx_handle_prli_done_event(struct scsi_qla_host *vha, struct event_arg *ea)
 		 * FCP/NVMe port
 		 */
 		if (NVME_FCP_TARGET(ea->fcport)) {
-			if (vha->hw->fc4_type_priority == FC4_PRIORITY_NVME)
-				ea->fcport->fc4_type &= ~FS_FC4TYPE_NVME;
-			else
-				ea->fcport->fc4_type &= ~FS_FC4TYPE_FCP;
 			ql_dbg(ql_dbg_disc, vha, 0x2118,
 				"%s %d %8phC post %s prli\n",
 				__func__, __LINE__, ea->fcport->port_name,
 				(ea->fcport->fc4_type & FS_FC4TYPE_NVME) ?
 				"NVMe" : "FCP");
-			qla24xx_post_prli_work(vha, ea->fcport);
-			break;
+			if (vha->hw->fc4_type_priority == FC4_PRIORITY_NVME)
+				ea->fcport->fc4_type &= ~FS_FC4TYPE_NVME;
+			else
+				ea->fcport->fc4_type &= ~FS_FC4TYPE_FCP;
 		}
 
-		/* at this point both PRLI NVME & PRLI FCP failed */
-		if (N2N_TOPO(vha->hw)) {
-			if (ea->fcport->n2n_link_reset_cnt < 3) {
-				ea->fcport->n2n_link_reset_cnt++;
-				/*
-				 * remote port is not sending Plogi. Reset
-				 * link to kick start his state machine
-				 */
-				set_bit(N2N_LINK_RESET, &vha->dpc_flags);
-			} else {
-				ql_log(ql_log_warn, vha, 0x2119,
-				    "%s %d %8phC Unable to reconnect\n",
-				    __func__, __LINE__, ea->fcport->port_name);
-			}
-		} else {
-			/*
-			 * switch connect. login failed. Take connection
-			 * down and allow relogin to retrigger
-			 */
-			ea->fcport->flags &= ~FCF_ASYNC_SENT;
-			ea->fcport->keep_nport_handle = 0;
-			qlt_schedule_sess_for_deletion(ea->fcport);
-		}
+		ea->fcport->flags &= ~FCF_ASYNC_SENT;
+		ea->fcport->keep_nport_handle = 0;
+		ea->fcport->logout_on_delete = 1;
+		qlt_schedule_sess_for_deletion(ea->fcport);
 		break;
 	}
 }
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index c0720c8e2f6d..53ccbd6b71ed 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2772,6 +2772,7 @@ static void qla2x00_els_dcmd2_sp_done(srb_t *sp, int res)
 			ea.rc = res;
 			qla_handle_els_plogi_done(vha, &ea);
 			break;
+
 		case CS_IOCB_ERROR:
 			switch (fw_status[1]) {
 			case LSC_SCODE_PORTID_USED:
@@ -2842,6 +2843,7 @@ static void qla2x00_els_dcmd2_sp_done(srb_t *sp, int res)
 				    fw_status[0], fw_status[1], fw_status[2]);
 
 				fcport->flags &= ~FCF_ASYNC_SENT;
+				fcport->disc_state = DSC_LOGIN_FAILED;
 				set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 				break;
 			}
@@ -2854,6 +2856,7 @@ static void qla2x00_els_dcmd2_sp_done(srb_t *sp, int res)
 			    fw_status[0], fw_status[1], fw_status[2]);
 
 			sp->fcport->flags &= ~FCF_ASYNC_SENT;
+			sp->fcport->disc_state = DSC_LOGIN_FAILED;
 			set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 			break;
 		}
@@ -2889,11 +2892,12 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *vha, int els_opcode,
 		return -ENOMEM;
 	}
 
+	fcport->flags |= FCF_ASYNC_SENT;
+	fcport->disc_state = DSC_LOGIN_PEND;
 	elsio = &sp->u.iocb_cmd;
 	ql_dbg(ql_dbg_io, vha, 0x3073,
 	    "Enter: PLOGI portid=%06x\n", fcport->d_id.b24);
 
-	fcport->flags |= FCF_ASYNC_SENT;
 	sp->type = SRB_ELS_DCMD;
 	sp->name = "ELS_DCMD";
 	sp->fcport = fcport;
-- 
2.30.2

[PATCH 5.4 06/73] scsi: qla2xxx: Add a shadow variable to hold disc_state history of fcport

[Greg Kroah-Hartman]

From: Shyam Sundar <ssundar@marvell.com>

[ Upstream commit 27258a5771446f9c7edc929ecb76fe2c12c29d97 ]

This patch adds a shadow variable to hold disc_state history for the fcport
and prints state transition when the logging is enabled.

Link: https://lore.kernel.org/r/20191217220617.28084-4-hmadhani@marvell.com
Signed-off-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_dbg.c    |  2 +-
 drivers/scsi/qla2xxx/qla_def.h    | 14 ++++++++++++++
 drivers/scsi/qla2xxx/qla_gbl.h    |  1 +
 drivers/scsi/qla2xxx/qla_gs.c     |  2 +-
 drivers/scsi/qla2xxx/qla_init.c   | 29 +++++++++++++++--------------
 drivers/scsi/qla2xxx/qla_inline.h | 24 ++++++++++++++++++++++++
 drivers/scsi/qla2xxx/qla_iocb.c   |  7 ++++---
 drivers/scsi/qla2xxx/qla_os.c     |  2 +-
 drivers/scsi/qla2xxx/qla_target.c | 11 ++++++-----
 9 files changed, 67 insertions(+), 25 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 7bbff91f8883..88a56e8480f7 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -18,7 +18,7 @@
  * | Device Discovery             |       0x2134       | 0x210e-0x2116  |
  * |				  | 		       | 0x211a         |
  * |                              |                    | 0x211c-0x2128  |
- * |                              |                    | 0x212a-0x2130  |
+ * |                              |                    | 0x212a-0x2134  |
  * | Queue Command and IO tracing |       0x3074       | 0x300b         |
  * |                              |                    | 0x3027-0x3028  |
  * |                              |                    | 0x303d-0x3041  |
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 894c2716b7ce..5e940543eaa1 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2464,6 +2464,7 @@ typedef struct fc_port {
 	struct qla_tgt_sess *tgt_session;
 	struct ct_sns_desc ct_desc;
 	enum discovery_state disc_state;
+	atomic_t shadow_disc_state;
 	enum discovery_state next_disc_state;
 	enum login_state fw_login_state;
 	unsigned long dm_login_expire;
@@ -2508,6 +2509,19 @@ struct event_arg {
 
 extern const char *const port_state_str[5];
 
+static const char * const port_dstate_str[] = {
+	"DELETED",
+	"GNN_ID",
+	"GNL",
+	"LOGIN_PEND",
+	"LOGIN_FAILED",
+	"GPDB",
+	"UPD_FCPORT",
+	"LOGIN_COMPLETE",
+	"ADISC",
+	"DELETE_PEND"
+};
+
 /*
  * FC port flags.
  */
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 5b163ad85c34..5a3c47eed645 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -80,6 +80,7 @@ extern int qla24xx_async_gnl(struct scsi_qla_host *, fc_port_t *);
 int qla2x00_post_work(struct scsi_qla_host *vha, struct qla_work_evt *e);
 extern void *qla2x00_alloc_iocbs_ready(struct qla_qpair *, srb_t *);
 extern int qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *, fc_port_t *);
+extern int qla24xx_async_abort_cmd(srb_t *, bool);
 
 extern void qla2x00_set_fcport_state(fc_port_t *fcport, int state);
 extern fc_port_t *
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index ae13aabf280b..d9b5ea77fde9 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -4290,7 +4290,7 @@ int qla24xx_async_gnnid(scsi_qla_host_t *vha, fc_port_t *fcport)
 	if (!vha->flags.online || (fcport->flags & FCF_ASYNC_SENT))
 		return rval;
 
-	fcport->disc_state = DSC_GNN_ID;
+	qla2x00_set_fcport_disc_state(fcport, DSC_GNN_ID);
 	sp = qla2x00_get_sp(vha, fcport, GFP_ATOMIC);
 	if (!sp)
 		goto done;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 5d2d0c287469..0aac1eb1e013 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -337,10 +337,10 @@ qla2x00_async_login(struct scsi_qla_host *vha, fc_port_t *fcport,
 	if (!sp)
 		goto done;
 
+	qla2x00_set_fcport_disc_state(fcport, DSC_LOGIN_PEND);
 	fcport->flags |= FCF_ASYNC_SENT;
 	fcport->logout_completed = 0;
 
-	fcport->disc_state = DSC_LOGIN_PEND;
 	sp->type = SRB_LOGIN_CMD;
 	sp->name = "login";
 	sp->gen1 = fcport->rscn_gen;
@@ -544,7 +544,7 @@ static int qla_post_els_plogi_work(struct scsi_qla_host *vha, fc_port_t *fcport)
 
 	e->u.fcport.fcport = fcport;
 	fcport->flags |= FCF_ASYNC_ACTIVE;
-	fcport->disc_state = DSC_LOGIN_PEND;
+	qla2x00_set_fcport_disc_state(fcport, DSC_LOGIN_PEND);
 	return qla2x00_post_work(vha, e);
 }
 
@@ -847,7 +847,8 @@ static void qla24xx_handle_gnl_done_event(scsi_qla_host_t *vha,
 				 * with GNL. Push disc_state back to DELETED
 				 * so GNL can go out again
 				 */
-				fcport->disc_state = DSC_DELETED;
+				qla2x00_set_fcport_disc_state(fcport,
+				    DSC_DELETED);
 				break;
 			case DSC_LS_PRLI_COMP:
 				if ((e->prli_svc_param_word_3[0] & BIT_4) == 0)
@@ -923,7 +924,7 @@ static void qla24xx_handle_gnl_done_event(scsi_qla_host_t *vha,
 			qla24xx_fcport_handle_login(vha, fcport);
 			break;
 		case ISP_CFG_N:
-			fcport->disc_state = DSC_DELETED;
+			qla2x00_set_fcport_disc_state(fcport, DSC_DELETED);
 			if (time_after_eq(jiffies, fcport->dm_login_expire)) {
 				if (fcport->n2n_link_reset_cnt < 2) {
 					fcport->n2n_link_reset_cnt++;
@@ -1093,7 +1094,7 @@ int qla24xx_async_gnl(struct scsi_qla_host *vha, fc_port_t *fcport)
 
 	spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags);
 	fcport->flags |= FCF_ASYNC_SENT;
-	fcport->disc_state = DSC_GNL;
+	qla2x00_set_fcport_disc_state(fcport, DSC_GNL);
 	fcport->last_rscn_gen = fcport->rscn_gen;
 	fcport->last_login_gen = fcport->login_gen;
 
@@ -1316,12 +1317,12 @@ int qla24xx_async_gpdb(struct scsi_qla_host *vha, fc_port_t *fcport, u8 opt)
 		return rval;
 	}
 
-	fcport->disc_state = DSC_GPDB;
-
 	sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
 	if (!sp)
 		goto done;
 
+	qla2x00_set_fcport_disc_state(fcport, DSC_GPDB);
+
 	fcport->flags |= FCF_ASYNC_SENT;
 	sp->type = SRB_MB_IOCB;
 	sp->name = "gpdb";
@@ -1400,7 +1401,7 @@ void __qla24xx_handle_gpdb_event(scsi_qla_host_t *vha, struct event_arg *ea)
 		ql_dbg(ql_dbg_disc, vha, 0x20d6,
 		    "%s %d %8phC session revalidate success\n",
 		    __func__, __LINE__, ea->fcport->port_name);
-		ea->fcport->disc_state = DSC_LOGIN_COMPLETE;
+		qla2x00_set_fcport_disc_state(ea->fcport, DSC_LOGIN_COMPLETE);
 	}
 	spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
 }
@@ -1454,7 +1455,7 @@ void qla24xx_handle_gpdb_event(scsi_qla_host_t *vha, struct event_arg *ea)
 		/* Set discovery state back to GNL to Relogin attempt */
 		if (qla_dual_mode_enabled(vha) ||
 		    qla_ini_mode_enabled(vha)) {
-			fcport->disc_state = DSC_GNL;
+			qla2x00_set_fcport_disc_state(fcport, DSC_GNL);
 			set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 		}
 		return;
@@ -2013,7 +2014,7 @@ qla24xx_handle_plogi_done_event(struct scsi_qla_host *vha, struct event_arg *ea)
 		    __func__, __LINE__, ea->fcport->port_name, ea->data[1]);
 
 		ea->fcport->flags &= ~FCF_ASYNC_SENT;
-		ea->fcport->disc_state = DSC_LOGIN_FAILED;
+		qla2x00_set_fcport_disc_state(ea->fcport, DSC_LOGIN_FAILED);
 		if (ea->data[1] & QLA_LOGIO_LOGIN_RETRIED)
 			set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 		else
@@ -5393,7 +5394,7 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 	ql_dbg(ql_dbg_disc, vha, 0x20ef, "%s %8phC\n",
 	    __func__, fcport->port_name);
 
-	fcport->disc_state = DSC_UPD_FCPORT;
+	qla2x00_set_fcport_disc_state(fcport, DSC_UPD_FCPORT);
 	fcport->login_retry = vha->hw->login_retry_count;
 	fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT);
 	fcport->deleted = 0;
@@ -5413,7 +5414,7 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 
 	if (NVME_TARGET(vha->hw, fcport)) {
 		qla_nvme_register_remote(vha, fcport);
-		fcport->disc_state = DSC_LOGIN_COMPLETE;
+		qla2x00_set_fcport_disc_state(fcport, DSC_LOGIN_COMPLETE);
 		qla2x00_set_fcport_state(fcport, FCS_ONLINE);
 		return;
 	}
@@ -5458,7 +5459,7 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 		}
 	}
 
-	fcport->disc_state = DSC_LOGIN_COMPLETE;
+	qla2x00_set_fcport_disc_state(fcport, DSC_LOGIN_COMPLETE);
 }
 
 void qla_register_fcport_fn(struct work_struct *work)
@@ -5867,7 +5868,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha)
 
 		if (NVME_TARGET(vha->hw, fcport)) {
 			if (fcport->disc_state == DSC_DELETE_PEND) {
-				fcport->disc_state = DSC_GNL;
+				qla2x00_set_fcport_disc_state(fcport, DSC_GNL);
 				vha->fcport_count--;
 				fcport->login_succ = 0;
 			}
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index af91e567a38d..477b0b8a5f4b 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -105,6 +105,30 @@ qla2x00_clean_dsd_pool(struct qla_hw_data *ha, struct crc_context *ctx)
 	INIT_LIST_HEAD(&ctx->dsd_list);
 }
 
+static inline void
+qla2x00_set_fcport_disc_state(fc_port_t *fcport, int state)
+{
+	int old_val;
+	uint8_t shiftbits, mask;
+
+	/* This will have to change when the max no. of states > 16 */
+	shiftbits = 4;
+	mask = (1 << shiftbits) - 1;
+
+	fcport->disc_state = state;
+	while (1) {
+		old_val = atomic_read(&fcport->shadow_disc_state);
+		if (old_val == atomic_cmpxchg(&fcport->shadow_disc_state,
+		    old_val, (old_val << shiftbits) | state)) {
+			ql_dbg(ql_dbg_disc, fcport->vha, 0x2134,
+			    "FCPort %8phC disc_state transition: %s to %s - portid=%06x.\n",
+			    fcport->port_name, port_dstate_str[old_val & mask],
+			    port_dstate_str[state], fcport->d_id.b24);
+			return;
+		}
+	}
+}
+
 static inline int
 qla2x00_hba_err_chk_enabled(srb_t *sp)
 {
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 53ccbd6b71ed..3f43410fab9d 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2843,7 +2843,8 @@ static void qla2x00_els_dcmd2_sp_done(srb_t *sp, int res)
 				    fw_status[0], fw_status[1], fw_status[2]);
 
 				fcport->flags &= ~FCF_ASYNC_SENT;
-				fcport->disc_state = DSC_LOGIN_FAILED;
+				qla2x00_set_fcport_disc_state(fcport,
+				    DSC_LOGIN_FAILED);
 				set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 				break;
 			}
@@ -2856,7 +2857,7 @@ static void qla2x00_els_dcmd2_sp_done(srb_t *sp, int res)
 			    fw_status[0], fw_status[1], fw_status[2]);
 
 			sp->fcport->flags &= ~FCF_ASYNC_SENT;
-			sp->fcport->disc_state = DSC_LOGIN_FAILED;
+			qla2x00_set_fcport_disc_state(fcport, DSC_LOGIN_FAILED);
 			set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
 			break;
 		}
@@ -2893,7 +2894,7 @@ qla24xx_els_dcmd2_iocb(scsi_qla_host_t *vha, int els_opcode,
 	}
 
 	fcport->flags |= FCF_ASYNC_SENT;
-	fcport->disc_state = DSC_LOGIN_PEND;
+	qla2x00_set_fcport_disc_state(fcport, DSC_LOGIN_PEND);
 	elsio = &sp->u.iocb_cmd;
 	ql_dbg(ql_dbg_io, vha, 0x3073,
 	    "Enter: PLOGI portid=%06x\n", fcport->d_id.b24);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 899dfb445710..af8306a9777f 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -5014,7 +5014,7 @@ void qla24xx_sched_upd_fcport(fc_port_t *fcport)
 	fcport->jiffies_at_registration = jiffies;
 	fcport->sec_since_registration = 0;
 	fcport->next_disc_state = DSC_DELETED;
-	fcport->disc_state = DSC_UPD_FCPORT;
+	qla2x00_set_fcport_disc_state(fcport, DSC_UPD_FCPORT);
 	spin_unlock_irqrestore(&fcport->vha->work_lock, flags);
 
 	queue_work(system_unbound_wq, &fcport->reg_work);
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 5dbdae1f65af..594dfbeee376 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -596,7 +596,8 @@ static void qla2x00_async_nack_sp_done(srb_t *sp, int res)
 			spin_lock_irqsave(&vha->hw->tgt.sess_lock, flags);
 		} else {
 			sp->fcport->login_retry = 0;
-			sp->fcport->disc_state = DSC_LOGIN_COMPLETE;
+			qla2x00_set_fcport_disc_state(sp->fcport,
+			    DSC_LOGIN_COMPLETE);
 			sp->fcport->deleted = 0;
 			sp->fcport->logout_on_delete = 1;
 		}
@@ -1056,7 +1057,7 @@ void qlt_free_session_done(struct work_struct *work)
 			tgt->sess_count--;
 	}
 
-	sess->disc_state = DSC_DELETED;
+	qla2x00_set_fcport_disc_state(sess, DSC_DELETED);
 	sess->fw_login_state = DSC_LS_PORT_UNAVAIL;
 	sess->deleted = QLA_SESS_DELETED;
 
@@ -1166,7 +1167,7 @@ void qlt_unreg_sess(struct fc_port *sess)
 		vha->hw->tgt.tgt_ops->clear_nacl_from_fcport_map(sess);
 
 	sess->deleted = QLA_SESS_DELETION_IN_PROGRESS;
-	sess->disc_state = DSC_DELETE_PEND;
+	qla2x00_set_fcport_disc_state(sess, DSC_DELETE_PEND);
 	sess->last_rscn_gen = sess->rscn_gen;
 	sess->last_login_gen = sess->login_gen;
 
@@ -1267,7 +1268,7 @@ void qlt_schedule_sess_for_deletion(struct fc_port *sess)
 	sess->deleted = QLA_SESS_DELETION_IN_PROGRESS;
 	spin_unlock_irqrestore(&sess->vha->work_lock, flags);
 
-	sess->disc_state = DSC_DELETE_PEND;
+	qla2x00_set_fcport_disc_state(sess, DSC_DELETE_PEND);
 
 	qla24xx_chk_fcp_state(sess);
 
@@ -6060,7 +6061,7 @@ static fc_port_t *qlt_get_port_database(struct scsi_qla_host *vha,
 		if (!IS_SW_RESV_ADDR(fcport->d_id))
 		   vha->fcport_count++;
 		fcport->login_gen++;
-		fcport->disc_state = DSC_LOGIN_COMPLETE;
+		qla2x00_set_fcport_disc_state(fcport, DSC_LOGIN_COMPLETE);
 		fcport->login_succ = 1;
 		newfcport = 1;
 	}
-- 
2.30.2

[PATCH 5.4 07/73] scsi: qla2xxx: Fix stuck login session using prli_pend_timer

[Greg Kroah-Hartman]

From: Quinn Tran <qutran@marvell.com>

[ Upstream commit 8aaac2d7da873aebeba92c666f82c00bbd74aaf9 ]

Session is stuck if driver sees FW has received a PRLI. Driver allows FW to
finish with processing of PRLI by checking back with FW at a later time to
see if the PRLI has finished. Instead, driver failed to push forward after
re-checking PRLI completion.

Fixes: ce0ba496dccf ("scsi: qla2xxx: Fix stuck login session")
Cc: stable@vger.kernel.org # 5.3
Link: https://lore.kernel.org/r/20191217220617.28084-9-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_def.h    |  5 +++++
 drivers/scsi/qla2xxx/qla_init.c   | 34 +++++++++++++++++++++++--------
 drivers/scsi/qla2xxx/qla_target.c |  1 +
 3 files changed, 32 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 5e940543eaa1..7c22f8eea3ea 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2402,6 +2402,7 @@ typedef struct fc_port {
 	unsigned int scan_needed:1;
 	unsigned int n2n_flag:1;
 	unsigned int explicit_logout:1;
+	unsigned int prli_pend_timer:1;
 
 	struct completion nvme_del_done;
 	uint32_t nvme_prli_service_param;
@@ -2428,6 +2429,7 @@ typedef struct fc_port {
 	struct work_struct free_work;
 	struct work_struct reg_work;
 	uint64_t jiffies_at_registration;
+	unsigned long prli_expired;
 	struct qlt_plogi_ack_t *plogi_link[QLT_PLOGI_LINK_MAX];
 
 	uint16_t tgt_id;
@@ -4857,6 +4859,9 @@ struct sff_8247_a0 {
 	(ha->fc4_type_priority == FC4_PRIORITY_NVME)) || \
 	NVME_ONLY_TARGET(fcport)) \
 
+#define PRLI_PHASE(_cls) \
+	((_cls == DSC_LS_PRLI_PEND) || (_cls == DSC_LS_PRLI_COMP))
+
 #include "qla_target.h"
 #include "qla_gbl.h"
 #include "qla_dbg.h"
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 0aac1eb1e013..b4f0c2c8414e 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -696,7 +696,7 @@ static void qla24xx_handle_gnl_done_event(scsi_qla_host_t *vha,
 	port_id_t id;
 	u64 wwn;
 	u16 data[2];
-	u8 current_login_state;
+	u8 current_login_state, nvme_cls;
 
 	fcport = ea->fcport;
 	ql_dbg(ql_dbg_disc, vha, 0xffff,
@@ -755,10 +755,17 @@ static void qla24xx_handle_gnl_done_event(scsi_qla_host_t *vha,
 
 		loop_id = le16_to_cpu(e->nport_handle);
 		loop_id = (loop_id & 0x7fff);
-		if (NVME_TARGET(vha->hw, fcport))
-			current_login_state = e->current_login_state >> 4;
-		else
-			current_login_state = e->current_login_state & 0xf;
+		nvme_cls = e->current_login_state >> 4;
+		current_login_state = e->current_login_state & 0xf;
+
+		if (PRLI_PHASE(nvme_cls)) {
+			current_login_state = nvme_cls;
+			fcport->fc4_type &= ~FS_FC4TYPE_FCP;
+			fcport->fc4_type |= FS_FC4TYPE_NVME;
+		} else if (PRLI_PHASE(current_login_state)) {
+			fcport->fc4_type |= FS_FC4TYPE_FCP;
+			fcport->fc4_type &= ~FS_FC4TYPE_NVME;
+		}
 
 		ql_dbg(ql_dbg_disc, vha, 0x20e2,
 		    "%s found %8phC CLS [%x|%x] fc4_type %d ID[%06x|%06x] lid[%d|%d]\n",
@@ -1238,12 +1245,19 @@ qla24xx_async_prli(struct scsi_qla_host *vha, fc_port_t *fcport)
 	struct srb_iocb *lio;
 	int rval = QLA_FUNCTION_FAILED;
 
-	if (!vha->flags.online)
+	if (!vha->flags.online) {
+		ql_dbg(ql_dbg_disc, vha, 0xffff, "%s %d %8phC exit\n",
+		    __func__, __LINE__, fcport->port_name);
 		return rval;
+	}
 
-	if (fcport->fw_login_state == DSC_LS_PLOGI_PEND ||
-	    fcport->fw_login_state == DSC_LS_PRLI_PEND)
+	if ((fcport->fw_login_state == DSC_LS_PLOGI_PEND ||
+	    fcport->fw_login_state == DSC_LS_PRLI_PEND) &&
+	    qla_dual_mode_enabled(vha)) {
+		ql_dbg(ql_dbg_disc, vha, 0xffff, "%s %d %8phC exit\n",
+		    __func__, __LINE__, fcport->port_name);
 		return rval;
+	}
 
 	sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
 	if (!sp)
@@ -1622,6 +1636,10 @@ int qla24xx_fcport_handle_login(struct scsi_qla_host *vha, fc_port_t *fcport)
 			break;
 		default:
 			if (fcport->login_pause) {
+				ql_dbg(ql_dbg_disc, vha, 0x20d8,
+				    "%s %d %8phC exit\n",
+				    __func__, __LINE__,
+				    fcport->port_name);
 				fcport->last_rscn_gen = fcport->rscn_gen;
 				fcport->last_login_gen = fcport->login_gen;
 				set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 594dfbeee376..509539ec58e9 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -1268,6 +1268,7 @@ void qlt_schedule_sess_for_deletion(struct fc_port *sess)
 	sess->deleted = QLA_SESS_DELETION_IN_PROGRESS;
 	spin_unlock_irqrestore(&sess->vha->work_lock, flags);
 
+	sess->prli_pend_timer = 0;
 	qla2x00_set_fcport_disc_state(sess, DSC_DELETE_PEND);
 
 	qla24xx_chk_fcp_state(sess);
-- 
2.30.2

[PATCH 5.4 08/73] scsi: qla2xxx: Fix fabric scan hang

[Greg Kroah-Hartman]

From: Quinn Tran <qutran@marvell.com>

[ Upstream commit f57a0107359605b29f4ea9afb8ee2e03473b1448 ]

On timeout, SRB pointer was cleared from outstanding command array and
dropped.  It was not allowed to go through the done process and cleanup.
This patch will abort the SRB where FW will return it with an error status
and resume the normal cleanup.

Link: https://lore.kernel.org/r/20191217220617.28084-3-hmadhani@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_gbl.h  |  1 +
 drivers/scsi/qla2xxx/qla_init.c | 34 +++++++++++++++------------
 drivers/scsi/qla2xxx/qla_iocb.c | 41 ++++++++++++++++++++++++++-------
 3 files changed, 53 insertions(+), 23 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 5a3c47eed645..7aa233771ec8 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -256,6 +256,7 @@ extern char *qla2x00_get_fw_version_str(struct scsi_qla_host *, char *);
 
 extern void qla2x00_mark_device_lost(scsi_qla_host_t *, fc_port_t *, int, int);
 extern void qla2x00_mark_all_devices_lost(scsi_qla_host_t *, int);
+extern int qla24xx_async_abort_cmd(srb_t *, bool);
 
 extern struct fw_blob *qla2x00_request_firmware(scsi_qla_host_t *);
 
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index b4f0c2c8414e..643b8ae36cbe 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -50,16 +50,9 @@ qla2x00_sp_timeout(struct timer_list *t)
 {
 	srb_t *sp = from_timer(sp, t, u.iocb_cmd.timer);
 	struct srb_iocb *iocb;
-	struct req_que *req;
-	unsigned long flags;
-	struct qla_hw_data *ha = sp->vha->hw;
 
-	WARN_ON_ONCE(irqs_disabled());
-	spin_lock_irqsave(&ha->hardware_lock, flags);
-	req = sp->qpair->req;
-	req->outstanding_cmds[sp->handle] = NULL;
+	WARN_ON(irqs_disabled());
 	iocb = &sp->u.iocb_cmd;
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	iocb->timeout(sp);
 }
 
@@ -153,7 +146,7 @@ static void qla24xx_abort_sp_done(srb_t *sp, int res)
 		sp->free(sp);
 }
 
-static int qla24xx_async_abort_cmd(srb_t *cmd_sp, bool wait)
+int qla24xx_async_abort_cmd(srb_t *cmd_sp, bool wait)
 {
 	scsi_qla_host_t *vha = cmd_sp->vha;
 	struct srb_iocb *abt_iocb;
@@ -253,6 +246,7 @@ qla2x00_async_iocb_timeout(void *data)
 	case SRB_NACK_PRLI:
 	case SRB_NACK_LOGO:
 	case SRB_CTRL_VP:
+	default:
 		rc = qla24xx_async_abort_cmd(sp, false);
 		if (rc) {
 			spin_lock_irqsave(sp->qpair->qp_lock_ptr, flags);
@@ -269,10 +263,6 @@ qla2x00_async_iocb_timeout(void *data)
 			sp->done(sp, QLA_FUNCTION_TIMEOUT);
 		}
 		break;
-	default:
-		WARN_ON_ONCE(true);
-		sp->done(sp, QLA_FUNCTION_TIMEOUT);
-		break;
 	}
 }
 
@@ -1794,9 +1784,23 @@ qla2x00_tmf_iocb_timeout(void *data)
 {
 	srb_t *sp = data;
 	struct srb_iocb *tmf = &sp->u.iocb_cmd;
+	int rc, h;
+	unsigned long flags;
 
-	tmf->u.tmf.comp_status = CS_TIMEOUT;
-	complete(&tmf->u.tmf.comp);
+	rc = qla24xx_async_abort_cmd(sp, false);
+	if (rc) {
+		spin_lock_irqsave(sp->qpair->qp_lock_ptr, flags);
+		for (h = 1; h < sp->qpair->req->num_outstanding_cmds; h++) {
+			if (sp->qpair->req->outstanding_cmds[h] == sp) {
+				sp->qpair->req->outstanding_cmds[h] = NULL;
+				break;
+			}
+		}
+		spin_unlock_irqrestore(sp->qpair->qp_lock_ptr, flags);
+		tmf->u.tmf.comp_status = CS_TIMEOUT;
+		tmf->u.tmf.data = QLA_FUNCTION_FAILED;
+		complete(&tmf->u.tmf.comp);
+	}
 }
 
 static void qla2x00_tmf_sp_done(srb_t *sp, int res)
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 3f43410fab9d..936103604d02 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -2537,13 +2537,32 @@ qla2x00_els_dcmd_iocb_timeout(void *data)
 	fc_port_t *fcport = sp->fcport;
 	struct scsi_qla_host *vha = sp->vha;
 	struct srb_iocb *lio = &sp->u.iocb_cmd;
+	unsigned long flags = 0;
+	int res, h;
 
 	ql_dbg(ql_dbg_io, vha, 0x3069,
 	    "%s Timeout, hdl=%x, portid=%02x%02x%02x\n",
 	    sp->name, sp->handle, fcport->d_id.b.domain, fcport->d_id.b.area,
 	    fcport->d_id.b.al_pa);
 
-	complete(&lio->u.els_logo.comp);
+	/* Abort the exchange */
+	res = qla24xx_async_abort_cmd(sp, false);
+	if (res) {
+		ql_dbg(ql_dbg_io, vha, 0x3070,
+		    "mbx abort_command failed.\n");
+		spin_lock_irqsave(sp->qpair->qp_lock_ptr, flags);
+		for (h = 1; h < sp->qpair->req->num_outstanding_cmds; h++) {
+			if (sp->qpair->req->outstanding_cmds[h] == sp) {
+				sp->qpair->req->outstanding_cmds[h] = NULL;
+				break;
+			}
+		}
+		spin_unlock_irqrestore(sp->qpair->qp_lock_ptr, flags);
+		complete(&lio->u.els_logo.comp);
+	} else {
+		ql_dbg(ql_dbg_io, vha, 0x3071,
+		    "mbx abort_command success.\n");
+	}
 }
 
 static void qla2x00_els_dcmd_sp_done(srb_t *sp, int res)
@@ -2708,23 +2727,29 @@ qla2x00_els_dcmd2_iocb_timeout(void *data)
 	srb_t *sp = data;
 	fc_port_t *fcport = sp->fcport;
 	struct scsi_qla_host *vha = sp->vha;
-	struct qla_hw_data *ha = vha->hw;
 	unsigned long flags = 0;
-	int res;
+	int res, h;
 
 	ql_dbg(ql_dbg_io + ql_dbg_disc, vha, 0x3069,
 	    "%s hdl=%x ELS Timeout, %8phC portid=%06x\n",
 	    sp->name, sp->handle, fcport->port_name, fcport->d_id.b24);
 
 	/* Abort the exchange */
-	spin_lock_irqsave(&ha->hardware_lock, flags);
-	res = ha->isp_ops->abort_command(sp);
+	res = qla24xx_async_abort_cmd(sp, false);
 	ql_dbg(ql_dbg_io, vha, 0x3070,
 	    "mbx abort_command %s\n",
 	    (res == QLA_SUCCESS) ? "successful" : "failed");
-	spin_unlock_irqrestore(&ha->hardware_lock, flags);
-
-	sp->done(sp, QLA_FUNCTION_TIMEOUT);
+	if (res) {
+		spin_lock_irqsave(sp->qpair->qp_lock_ptr, flags);
+		for (h = 1; h < sp->qpair->req->num_outstanding_cmds; h++) {
+			if (sp->qpair->req->outstanding_cmds[h] == sp) {
+				sp->qpair->req->outstanding_cmds[h] = NULL;
+				break;
+			}
+		}
+		spin_unlock_irqrestore(sp->qpair->qp_lock_ptr, flags);
+		sp->done(sp, QLA_FUNCTION_TIMEOUT);
+	}
 }
 
 void qla2x00_els_dcmd2_free(scsi_qla_host_t *vha, struct els_plogi *els_plogi)
-- 
2.30.2

[PATCH 5.4 09/73] net/sctp: fix race condition in sctp_destroy_sock

[Greg Kroah-Hartman]

From: Or Cohen <orcohen@paloaltonetworks.com>

commit b166a20b07382b8bc1dcee2a448715c9c2c81b5b upstream.

If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock
held and sp->do_auto_asconf is true, then an element is removed
from the auto_asconf_splist without any proper locking.

This can happen in the following functions:
1. In sctp_accept, if sctp_sock_migrate fails.
2. In inet_create or inet6_create, if there is a bpf program
   attached to BPF_CGROUP_INET_SOCK_CREATE which denies
   creation of the sctp socket.

The bug is fixed by acquiring addr_wq_lock in sctp_destroy_sock
instead of sctp_close.

This addresses CVE-2021-23133.

Reported-by: Or Cohen <orcohen@paloaltonetworks.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Fixes: 610236587600 ("bpf: Add new cgroup attach type to enable sock modifications")
Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/socket.c |   13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1539,11 +1539,9 @@ static void sctp_close(struct sock *sk,
 
 	/* Supposedly, no process has access to the socket, but
 	 * the net layers still may.
-	 * Also, sctp_destroy_sock() needs to be called with addr_wq_lock
-	 * held and that should be grabbed before socket lock.
 	 */
-	spin_lock_bh(&net->sctp.addr_wq_lock);
-	bh_lock_sock_nested(sk);
+	local_bh_disable();
+	bh_lock_sock(sk);
 
 	/* Hold the sock, since sk_common_release() will put sock_put()
 	 * and we have just a little more cleanup.
@@ -1552,7 +1550,7 @@ static void sctp_close(struct sock *sk,
 	sk_common_release(sk);
 
 	bh_unlock_sock(sk);
-	spin_unlock_bh(&net->sctp.addr_wq_lock);
+	local_bh_enable();
 
 	sock_put(sk);
 
@@ -5115,9 +5113,6 @@ static int sctp_init_sock(struct sock *s
 	sk_sockets_allocated_inc(sk);
 	sock_prot_inuse_add(net, sk->sk_prot, 1);
 
-	/* Nothing can fail after this block, otherwise
-	 * sctp_destroy_sock() will be called without addr_wq_lock held
-	 */
 	if (net->sctp.default_auto_asconf) {
 		spin_lock(&sock_net(sk)->sctp.addr_wq_lock);
 		list_add_tail(&sp->auto_asconf_list,
@@ -5152,7 +5147,9 @@ static void sctp_destroy_sock(struct soc
 
 	if (sp->do_auto_asconf) {
 		sp->do_auto_asconf = 0;
+		spin_lock_bh(&sock_net(sk)->sctp.addr_wq_lock);
 		list_del(&sp->auto_asconf_list);
+		spin_unlock_bh(&sock_net(sk)->sctp.addr_wq_lock);
 	}
 	sctp_endpoint_free(sp->ep);
 	local_bh_disable();

[PATCH 5.4 10/73] Input: nspire-keypad - enable interrupts only when opened

[Greg Kroah-Hartman]

From: Fabian Vogt <fabian@ritter-vogt.de>

[ Upstream commit 69d5ff3e9e51e23d5d81bf48480aa5671be67a71 ]

The driver registers an interrupt handler in _probe, but didn't configure
them until later when the _open function is called. In between, the keypad
can fire an IRQ due to touchpad activity, which the handler ignores. This
causes the kernel to disable the interrupt, blocking the keypad from
working.

Fix this by disabling interrupts before registering the handler.
Additionally, disable them in _close, so that they're only enabled while
open.

Fixes: fc4f31461892 ("Input: add TI-Nspire keypad support")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/3383725.iizBOSrK1V@linux-e202.suse.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/keyboard/nspire-keypad.c | 56 ++++++++++++++------------
 1 file changed, 31 insertions(+), 25 deletions(-)

diff --git a/drivers/input/keyboard/nspire-keypad.c b/drivers/input/keyboard/nspire-keypad.c
index 63d5e488137d..e9fa1423f136 100644
--- a/drivers/input/keyboard/nspire-keypad.c
+++ b/drivers/input/keyboard/nspire-keypad.c
@@ -93,9 +93,15 @@ static irqreturn_t nspire_keypad_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int nspire_keypad_chip_init(struct nspire_keypad *keypad)
+static int nspire_keypad_open(struct input_dev *input)
 {
+	struct nspire_keypad *keypad = input_get_drvdata(input);
 	unsigned long val = 0, cycles_per_us, delay_cycles, row_delay_cycles;
+	int error;
+
+	error = clk_prepare_enable(keypad->clk);
+	if (error)
+		return error;
 
 	cycles_per_us = (clk_get_rate(keypad->clk) / 1000000);
 	if (cycles_per_us == 0)
@@ -121,30 +127,6 @@ static int nspire_keypad_chip_init(struct nspire_keypad *keypad)
 	keypad->int_mask = 1 << 1;
 	writel(keypad->int_mask, keypad->reg_base + KEYPAD_INTMSK);
 
-	/* Disable GPIO interrupts to prevent hanging on touchpad */
-	/* Possibly used to detect touchpad events */
-	writel(0, keypad->reg_base + KEYPAD_UNKNOWN_INT);
-	/* Acknowledge existing interrupts */
-	writel(~0, keypad->reg_base + KEYPAD_UNKNOWN_INT_STS);
-
-	return 0;
-}
-
-static int nspire_keypad_open(struct input_dev *input)
-{
-	struct nspire_keypad *keypad = input_get_drvdata(input);
-	int error;
-
-	error = clk_prepare_enable(keypad->clk);
-	if (error)
-		return error;
-
-	error = nspire_keypad_chip_init(keypad);
-	if (error) {
-		clk_disable_unprepare(keypad->clk);
-		return error;
-	}
-
 	return 0;
 }
 
@@ -152,6 +134,11 @@ static void nspire_keypad_close(struct input_dev *input)
 {
 	struct nspire_keypad *keypad = input_get_drvdata(input);
 
+	/* Disable interrupts */
+	writel(0, keypad->reg_base + KEYPAD_INTMSK);
+	/* Acknowledge existing interrupts */
+	writel(~0, keypad->reg_base + KEYPAD_INT);
+
 	clk_disable_unprepare(keypad->clk);
 }
 
@@ -210,6 +197,25 @@ static int nspire_keypad_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	error = clk_prepare_enable(keypad->clk);
+	if (error) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		return error;
+	}
+
+	/* Disable interrupts */
+	writel(0, keypad->reg_base + KEYPAD_INTMSK);
+	/* Acknowledge existing interrupts */
+	writel(~0, keypad->reg_base + KEYPAD_INT);
+
+	/* Disable GPIO interrupts to prevent hanging on touchpad */
+	/* Possibly used to detect touchpad events */
+	writel(0, keypad->reg_base + KEYPAD_UNKNOWN_INT);
+	/* Acknowledge existing GPIO interrupts */
+	writel(~0, keypad->reg_base + KEYPAD_UNKNOWN_INT_STS);
+
+	clk_disable_unprepare(keypad->clk);
+
 	input_set_drvdata(input, keypad);
 
 	input->id.bustype = BUS_HOST;
-- 
2.30.2

[PATCH 5.4 11/73] gpio: sysfs: Obey valid_mask

[Greg Kroah-Hartman]

From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>

[ Upstream commit 23cf00ddd2e1aacf1873e43f5e0c519c120daf7a ]

Do not allow exporting GPIOs which are set invalid
by the driver's valid mask.

Fixes: 726cb3ba4969 ("gpiolib: Support 'gpio-reserved-ranges' property")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib-sysfs.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
index fbf6b1a0a4fa..558cd900d399 100644
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
@@ -457,6 +457,8 @@ static ssize_t export_store(struct class *class,
 	long			gpio;
 	struct gpio_desc	*desc;
 	int			status;
+	struct gpio_chip	*gc;
+	int			offset;
 
 	status = kstrtol(buf, 0, &gpio);
 	if (status < 0)
@@ -468,6 +470,12 @@ static ssize_t export_store(struct class *class,
 		pr_warn("%s: invalid GPIO %ld\n", __func__, gpio);
 		return -EINVAL;
 	}
+	gc = desc->gdev->chip;
+	offset = gpio_chip_hwgpio(desc);
+	if (!gpiochip_line_is_valid(gc, offset)) {
+		pr_warn("%s: GPIO %ld masked\n", __func__, gpio);
+		return -EINVAL;
+	}
 
 	/* No extra locking here; FLAG_SYSFS just signifies that the
 	 * request and export were done by on behalf of userspace, so
-- 
2.30.2

[PATCH 5.4 12/73] dmaengine: dw: Make it dependent to HAS_IOMEM

[Greg Kroah-Hartman]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 88cd1d6191b13689094310c2405394e4ce36d061 ]

Some architectures do not provide devm_*() APIs. Hence make the driver
dependent on HAVE_IOMEM.

Fixes: dbde5c2934d1 ("dw_dmac: use devm_* functions to simplify code")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20210324141757.24710-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dw/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/dma/dw/Kconfig b/drivers/dma/dw/Kconfig
index e5162690de8f..db25f9b7778c 100644
--- a/drivers/dma/dw/Kconfig
+++ b/drivers/dma/dw/Kconfig
@@ -10,6 +10,7 @@ config DW_DMAC_CORE
 
 config DW_DMAC
 	tristate "Synopsys DesignWare AHB DMA platform driver"
+	depends on HAS_IOMEM
 	select DW_DMAC_CORE
 	help
 	  Support the Synopsys DesignWare AHB DMA controller. This
@@ -18,6 +19,7 @@ config DW_DMAC
 config DW_DMAC_PCI
 	tristate "Synopsys DesignWare AHB DMA PCI driver"
 	depends on PCI
+	depends on HAS_IOMEM
 	select DW_DMAC_CORE
 	help
 	  Support the Synopsys DesignWare AHB DMA controller on the
-- 
2.30.2

[PATCH 5.4 13/73] ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 140a776833957539c84301dbdb4c3013876de118 ]

We have a duplicate legacy clock defined for sha2md5_fck that can
sometimes race with clk_disable() with the dts configured clock
for OMAP4_SHA2MD5_CLKCTRL when unused clocks are disabled during
boot causing an "Unhandled fault: imprecise external abort".

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap44xx-clocks.dtsi | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
index e9d9c8460682..68ab6a95f222 100644
--- a/arch/arm/boot/dts/omap44xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -770,14 +770,6 @@
 		ti,max-div = <2>;
 	};
 
-	sha2md5_fck: sha2md5_fck@15c8 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x15c8>;
-	};
-
 	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-- 
2.30.2

[PATCH 5.4 14/73] ARM: dts: Fix moving mmc devices with aliases for omap4 & 5

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 77335a040178a0456d4eabc8bf17a7ca3ee4a327 ]

Fix moving mmc devices with dts aliases as discussed on the lists.
Without this we now have internal eMMC mmc1 show up as mmc2 compared
to the earlier order of devices.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap4.dtsi | 5 +++++
 arch/arm/boot/dts/omap5.dtsi | 5 +++++
 2 files changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 904852006b9b..0a36b8fe3fa9 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -22,6 +22,11 @@
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 041646fabb2d..3b56e993326d 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -25,6 +25,11 @@
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
 		i2c4 = &i2c5;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
-- 
2.30.2

[PATCH 5.4 15/73] lockdep: Add a missing initialization hint to the "INFO: Trying to register non-static key" message

[Greg Kroah-Hartman]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit 3a85969e9d912d5dd85362ee37b5f81266e00e77 ]

Since this message is printed when dynamically allocated spinlocks (e.g.
kzalloc()) are used without initialization (e.g. spin_lock_init()),
suggest to developers to check whether initialization functions for objects
were called, before making developers wonder what annotation is missing.

[ mingo: Minor tweaks to the message. ]

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210321064913.4619-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/lockdep.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index bca0f7f71cde..7429f1571755 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -875,7 +875,8 @@ static bool assign_lock_key(struct lockdep_map *lock)
 		/* Debug-check: all keys must be persistent! */
 		debug_locks_off();
 		pr_err("INFO: trying to register non-static key.\n");
-		pr_err("the code is fine but needs lockdep annotation.\n");
+		pr_err("The code is fine but needs lockdep annotation, or maybe\n");
+		pr_err("you didn't initialize this object before use?\n");
 		pr_err("turning off the locking correctness validator.\n");
 		dump_stack();
 		return false;
-- 
2.30.2

[PATCH 5.4 16/73] arc: kernel: Return -EFAULT if copy_to_user() fails

[Greg Kroah-Hartman]

From: Wang Qing <wangqing@vivo.com>

[ Upstream commit 46e152186cd89d940b26726fff11eb3f4935b45a ]

The copy_to_user() function returns the number of bytes remaining to be
copied, but we want to return -EFAULT if the copy doesn't complete.

Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/kernel/signal.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c
index 3d57ed0d8535..404518051093 100644
--- a/arch/arc/kernel/signal.c
+++ b/arch/arc/kernel/signal.c
@@ -96,7 +96,7 @@ stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
 			     sizeof(sf->uc.uc_mcontext.regs.scratch));
 	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(sigset_t));
 
-	return err;
+	return err ? -EFAULT : 0;
 }
 
 static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
@@ -110,7 +110,7 @@ static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
 				&(sf->uc.uc_mcontext.regs.scratch),
 				sizeof(sf->uc.uc_mcontext.regs.scratch));
 	if (err)
-		return err;
+		return -EFAULT;
 
 	set_current_blocked(&set);
 	regs->bta	= uregs.scratch.bta;
-- 
2.30.2

[PATCH 5.4 17/73] ASoC: max98373: Added 30ms turn on/off time delay

[Greg Kroah-Hartman]

From: Ryan Lee <ryans.lee@maximintegrated.com>

[ Upstream commit 3a27875e91fb9c29de436199d20b33f9413aea77 ]

Amp requires 10 ~ 30ms for the power ON and OFF.
Added 30ms delay for stability.

Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20210325033555.29377-2-ryans.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98373.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c
index 96718e3a1ad0..16fbc9faed90 100644
--- a/sound/soc/codecs/max98373.c
+++ b/sound/soc/codecs/max98373.c
@@ -410,11 +410,13 @@ static int max98373_dac_event(struct snd_soc_dapm_widget *w,
 		regmap_update_bits(max98373->regmap,
 			MAX98373_R20FF_GLOBAL_SHDN,
 			MAX98373_GLOBAL_EN_MASK, 1);
+		usleep_range(30000, 31000);
 		break;
 	case SND_SOC_DAPM_POST_PMD:
 		regmap_update_bits(max98373->regmap,
 			MAX98373_R20FF_GLOBAL_SHDN,
 			MAX98373_GLOBAL_EN_MASK, 0);
+		usleep_range(30000, 31000);
 		max98373->tdm_mode = false;
 		break;
 	default:
-- 
2.30.2

[PATCH 5.4 18/73] neighbour: Disregard DEAD dst in neigh_update

[Greg Kroah-Hartman]

From: Tong Zhu <zhutong@amazon.com>

[ Upstream commit d47ec7a0a7271dda08932d6208e4ab65ab0c987c ]

After a short network outage, the dst_entry is timed out and put
in DST_OBSOLETE_DEAD. We are in this code because arp reply comes
from this neighbour after network recovers. There is a potential
race condition that dst_entry is still in DST_OBSOLETE_DEAD.
With that, another neighbour lookup causes more harm than good.

In best case all packets in arp_queue are lost. This is
counterproductive to the original goal of finding a better path
for those packets.

I observed a worst case with 4.x kernel where a dst_entry in
DST_OBSOLETE_DEAD state is associated with loopback net_device.
It leads to an ethernet header with all zero addresses.
A packet with all zero source MAC address is quite deadly with
mac80211, ath9k and 802.11 block ack.  It fails
ieee80211_find_sta_by_ifaddr in ath9k (xmit.c). Ath9k flushes tx
queue (ath_tx_complete_aggr). BAW (block ack window) is not
updated. BAW logic is damaged and ath9k transmission is disabled.

Signed-off-by: Tong Zhu <zhutong@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/neighbour.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 7080d708b7d0..6635b83113f8 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -1379,7 +1379,7 @@ static int __neigh_update(struct neighbour *neigh, const u8 *lladdr,
 			 * we can reinject the packet there.
 			 */
 			n2 = NULL;
-			if (dst) {
+			if (dst && dst->obsolete != DST_OBSOLETE_DEAD) {
 				n2 = dst_neigh_lookup_skb(dst, skb);
 				if (n2)
 					n1 = n2;
-- 
2.30.2

[PATCH 5.4 19/73] ARM: keystone: fix integer overflow warning

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 844b85dda2f569943e1e018fdd63b6f7d1d6f08e ]

clang warns about an impossible condition when building with 32-bit
phys_addr_t:

arch/arm/mach-keystone/keystone.c:79:16: error: result of comparison of constant 51539607551 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
            mem_end   > KEYSTONE_HIGH_PHYS_END) {
            ~~~~~~~   ^ ~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-keystone/keystone.c:78:16: error: result of comparison of constant 34359738368 with expression of type 'phys_addr_t' (aka 'unsigned int') is always true [-Werror,-Wtautological-constant-out-of-range-compare]
        if (mem_start < KEYSTONE_HIGH_PHYS_START ||
            ~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~

Change the temporary variable to a fixed-size u64 to avoid the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Link: https://lore.kernel.org/r/20210323131814.2751750-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-keystone/keystone.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index 638808c4e122..697adedaced4 100644
--- a/arch/arm/mach-keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
@@ -62,7 +62,7 @@ static void __init keystone_init(void)
 static long long __init keystone_pv_fixup(void)
 {
 	long long offset;
-	phys_addr_t mem_start, mem_end;
+	u64 mem_start, mem_end;
 
 	mem_start = memblock_start_of_DRAM();
 	mem_end = memblock_end_of_DRAM();
@@ -75,7 +75,7 @@ static long long __init keystone_pv_fixup(void)
 	if (mem_start < KEYSTONE_HIGH_PHYS_START ||
 	    mem_end   > KEYSTONE_HIGH_PHYS_END) {
 		pr_crit("Invalid address space for memory (%08llx-%08llx)\n",
-		        (u64)mem_start, (u64)mem_end);
+		        mem_start, mem_end);
 		return 0;
 	}
 
-- 
2.30.2

[PATCH 5.4 20/73] ARM: omap1: fix building with clang IAS

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 28399a5a6d569c9bdb612345e4933046ca37cde5 ]

The clang integrated assembler fails to build one file with
a complex asm instruction:

arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: error: invalid instruction, any one of the following would fix this:
 mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
 ^
arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: armv6t2
 mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
 ^
arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: thumb2
 mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
 ^

The problem is that 'NR_IRQS_LEGACY' is not defined here. Apparently
gas does not care because we first add and then subtract this number,
leading to the immediate value to be the same regardless of the
specific definition of NR_IRQS_LEGACY.

Neither the way that 'gas' just silently builds this file, nor the
way that clang IAS makes nonsensical suggestions for how to fix it
is great. Fortunately there is an easy fix, which is to #include
the header that contains the definition.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210308153430.2530616-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap1/ams-delta-fiq-handler.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 14a6c3eb3298..f745a65d3bd7 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -15,6 +15,7 @@
 #include <linux/platform_data/gpio-omap.h>
 
 #include <asm/assembler.h>
+#include <asm/irq.h>
 
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
-- 
2.30.2

[PATCH 5.4 21/73] drm/msm: Fix a5xx/a6xx timestamps

[Greg Kroah-Hartman]

From: Rob Clark <robdclark@chromium.org>

[ Upstream commit 9fbd3088351b92e8c2cef6e37a39decb12a8d5bb ]

They were reading a counter that was configured to ALWAYS_COUNT (ie.
cycles that the GPU is doing something) rather than ALWAYS_ON.  This
isn't the thing that userspace is looking for.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Message-Id: <20210325012358.1759770-2-robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 4 ++--
 drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index f84049119f1c..e3579e5ffa14 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -1131,8 +1131,8 @@ static int a5xx_pm_suspend(struct msm_gpu *gpu)
 
 static int a5xx_get_timestamp(struct msm_gpu *gpu, uint64_t *value)
 {
-	*value = gpu_read64(gpu, REG_A5XX_RBBM_PERFCTR_CP_0_LO,
-		REG_A5XX_RBBM_PERFCTR_CP_0_HI);
+	*value = gpu_read64(gpu, REG_A5XX_RBBM_ALWAYSON_COUNTER_LO,
+		REG_A5XX_RBBM_ALWAYSON_COUNTER_HI);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index ab75f0309d4b..df2656e57991 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -773,8 +773,8 @@ static int a6xx_get_timestamp(struct msm_gpu *gpu, uint64_t *value)
 	/* Force the GPU power on so we can read this register */
 	a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET);
 
-	*value = gpu_read64(gpu, REG_A6XX_RBBM_PERFCTR_CP_0_LO,
-		REG_A6XX_RBBM_PERFCTR_CP_0_HI);
+	*value = gpu_read64(gpu, REG_A6XX_CP_ALWAYS_ON_COUNTER_LO,
+		REG_A6XX_CP_ALWAYS_ON_COUNTER_HI);
 
 	a6xx_gmu_clear_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET);
 	return 0;
-- 
2.30.2

[PATCH 5.4 22/73] ASoC: fsl_esai: Fix TDM slot setup for I2S mode

[Greg Kroah-Hartman]

From: Alexander Shiyan <shc_work@mail.ru>

[ Upstream commit e7a48c710defa0e0fef54d42b7d9e4ab596e2761 ]

When using the driver in I2S TDM mode, the fsl_esai_startup()
function rewrites the number of slots previously set by the
fsl_esai_set_dai_tdm_slot() function to 2.
To fix this, let's use the saved slot count value or, if TDM
is not used and the number of slots is not set, the driver will use
the default value (2), which is set by fsl_esai_probe().

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210402081405.9892-1-shc_work@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/fsl/fsl_esai.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index 84290be778f0..33ade79fa032 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -494,11 +494,13 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
 				   ESAI_SAICR_SYNC, esai_priv->synchronous ?
 				   ESAI_SAICR_SYNC : 0);
 
-		/* Set a default slot number -- 2 */
+		/* Set slots count */
 		regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR,
-				   ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(2));
+				   ESAI_xCCR_xDC_MASK,
+				   ESAI_xCCR_xDC(esai_priv->slots));
 		regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR,
-				   ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(2));
+				   ESAI_xCCR_xDC_MASK,
+				   ESAI_xCCR_xDC(esai_priv->slots));
 	}
 
 	return 0;
-- 
2.30.2

[PATCH 5.4 23/73] scsi: scsi_transport_srp: Dont block target in SRP_PORT_LOST state

[Greg Kroah-Hartman]

From: Martin Wilck <mwilck@suse.com>

[ Upstream commit 5cd0f6f57639c5afbb36100c69281fee82c95ee7 ]

rport_dev_loss_timedout() sets the rport state to SRP_PORT_LOST and the
SCSI target state to SDEV_TRANSPORT_OFFLINE. If this races with
srp_reconnect_work(), a warning is printed:

Mar 27 18:48:07 ictm1604s01h4 kernel: dev_loss_tmo expired for SRP port-18:1 / host18.
Mar 27 18:48:07 ictm1604s01h4 kernel: ------------[ cut here ]------------
Mar 27 18:48:07 ictm1604s01h4 kernel: scsi_internal_device_block(18:0:0:100) failed: ret = -22
Mar 27 18:48:07 ictm1604s01h4 kernel: Call Trace:
Mar 27 18:48:07 ictm1604s01h4 kernel:  ? scsi_target_unblock+0x50/0x50 [scsi_mod]
Mar 27 18:48:07 ictm1604s01h4 kernel:  starget_for_each_device+0x80/0xb0 [scsi_mod]
Mar 27 18:48:07 ictm1604s01h4 kernel:  target_block+0x24/0x30 [scsi_mod]
Mar 27 18:48:07 ictm1604s01h4 kernel:  device_for_each_child+0x57/0x90
Mar 27 18:48:07 ictm1604s01h4 kernel:  srp_reconnect_rport+0xe4/0x230 [scsi_transport_srp]
Mar 27 18:48:07 ictm1604s01h4 kernel:  srp_reconnect_work+0x40/0xc0 [scsi_transport_srp]

Avoid this by not trying to block targets for rports in SRP_PORT_LOST
state.

Link: https://lore.kernel.org/r/20210401091105.8046-1-mwilck@suse.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_transport_srp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_transport_srp.c b/drivers/scsi/scsi_transport_srp.c
index 8cd0a87764df..9fee851c23a5 100644
--- a/drivers/scsi/scsi_transport_srp.c
+++ b/drivers/scsi/scsi_transport_srp.c
@@ -541,7 +541,7 @@ int srp_reconnect_rport(struct srp_rport *rport)
 	res = mutex_lock_interruptible(&rport->mutex);
 	if (res)
 		goto out;
-	if (rport->state != SRP_RPORT_FAIL_FAST)
+	if (rport->state != SRP_RPORT_FAIL_FAST && rport->state != SRP_RPORT_LOST)
 		/*
 		 * sdev state must be SDEV_TRANSPORT_OFFLINE, transition
 		 * to SDEV_BLOCK is illegal. Calling scsi_target_unblock()
-- 
2.30.2

[PATCH 5.4 24/73] net: ieee802154: stop dump llsec keys for monitors

[Greg Kroah-Hartman]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit fb3c5cdf88cd504ef11d59e8d656f4bc896c6922 ]

This patch stops dumping llsec keys for monitors which we don't support
yet. Otherwise we will access llsec mib which isn't initialized for
monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-4-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ieee802154/nl802154.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c
index f03958fcb5be..27e34aab09a6 100644
--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -1514,6 +1514,11 @@ nl802154_dump_llsec_key(struct sk_buff *skb, struct netlink_callback *cb)
 	if (err)
 		return err;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR) {
+		err = skb->len;
+		goto out_err;
+	}
+
 	if (!wpan_dev->netdev) {
 		err = -EINVAL;
 		goto out_err;
-- 
2.30.2

[PATCH 5.4 25/73] net: ieee802154: forbid monitor for add llsec key

[Greg Kroah-Hartman]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit 08470c5453339369bd3d590c4cbb0b5961cdcbb6 ]

This patch forbids to add llsec key for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-5-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ieee802154/nl802154.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c
index 27e34aab09a6..0920f320b59b 100644
--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -1573,6 +1573,9 @@ static int nl802154_add_llsec_key(struct sk_buff *skb, struct genl_info *info)
 	struct ieee802154_llsec_key_id id = { };
 	u32 commands[NL802154_CMD_FRAME_NR_IDS / 32] = { };
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR)
+		return -EOPNOTSUPP;
+
 	if (!info->attrs[NL802154_ATTR_SEC_KEY] ||
 	    nla_parse_nested_deprecated(attrs, NL802154_KEY_ATTR_MAX, info->attrs[NL802154_ATTR_SEC_KEY], nl802154_key_policy, info->extack))
 		return -EINVAL;
-- 
2.30.2

[PATCH 5.4 26/73] net: ieee802154: forbid monitor for del llsec key

[Greg Kroah-Hartman]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit b6e2949544a183f590ae6f3ef2d1aaaa2c44e38a ]

This patch forbids to del llsec key for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-6-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ieee802154/nl802154.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c
index 0920f320b59b..7fdcbaecc4fd 100644
--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -1625,6 +1625,9 @@ static int nl802154_del_llsec_key(struct sk_buff *skb, struct genl_info *info)
 	struct nlattr *attrs[NL802154_KEY_ATTR_MAX + 1];
 	struct ieee802154_llsec_key_id id;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR)
+		return -EOPNOTSUPP;
+
 	if (!info->attrs[NL802154_ATTR_SEC_KEY] ||
 	    nla_parse_nested_deprecated(attrs, NL802154_KEY_ATTR_MAX, info->attrs[NL802154_ATTR_SEC_KEY], nl802154_key_policy, info->extack))
 		return -EINVAL;
-- 
2.30.2

[PATCH 5.4 27/73] net: ieee802154: stop dump llsec devs for monitors

[Greg Kroah-Hartman]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit 5582d641e6740839c9b83efd1fbf9bcd00b6f5fc ]

This patch stops dumping llsec devs for monitors which we don't support
yet. Otherwise we will access llsec mib which isn't initialized for
monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-7-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ieee802154/nl802154.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c
index 7fdcbaecc4fd..97074180c2e5 100644
--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -1693,6 +1693,11 @@ nl802154_dump_llsec_dev(struct sk_buff *skb, struct netlink_callback *cb)
 	if (err)
 		return err;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR) {
+		err = skb->len;
+		goto out_err;
+	}
+
 	if (!wpan_dev->netdev) {
 		err = -EINVAL;
 		goto out_err;
-- 
2.30.2

[PATCH 5.4 28/73] net: ieee802154: forbid monitor for add llsec dev

[Greg Kroah-Hartman]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit 5303f956b05a2886ff42890908156afaec0f95ac ]

This patch forbids to add llsec dev for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-8-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ieee802154/nl802154.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c
index 97074180c2e5..797888b4b2ce 100644
--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -1784,6 +1784,9 @@ static int nl802154_add_llsec_dev(struct sk_buff *skb, struct genl_info *info)
 	struct wpan_dev *wpan_dev = dev->ieee802154_ptr;
 	struct ieee802154_llsec_device dev_desc;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR)
+		return -EOPNOTSUPP;
+
 	if (ieee802154_llsec_parse_device(info->attrs[NL802154_ATTR_SEC_DEVICE],
 					  &dev_desc) < 0)
 		return -EINVAL;
-- 
2.30.2

[PATCH 5.4 29/73] net: ieee802154: forbid monitor for del llsec dev

[Greg Kroah-Hartman]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit ad8f9de1f3566686af35b1c6b43240726541da61 ]

This patch forbids to del llsec dev for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-9-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ieee802154/nl802154.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c
index 797888b4b2ce..4f6777193029 100644
--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -1802,6 +1802,9 @@ static int nl802154_del_llsec_dev(struct sk_buff *skb, struct genl_info *info)
 	struct nlattr *attrs[NL802154_DEV_ATTR_MAX + 1];
 	__le64 extended_addr;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR)
+		return -EOPNOTSUPP;
+
 	if (!info->attrs[NL802154_ATTR_SEC_DEVICE] ||
 	    nla_parse_nested_deprecated(attrs, NL802154_DEV_ATTR_MAX, info->attrs[NL802154_ATTR_SEC_DEVICE], nl802154_dev_policy, info->extack))
 		return -EINVAL;
-- 
2.30.2

[PATCH 5.4 30/73] net: ieee802154: stop dump llsec devkeys for monitors

[Greg Kroah-Hartman]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit 080d1a57a94d93e70f84b7a360baa351388c574f ]

This patch stops dumping llsec devkeys for monitors which we don't support
yet. Otherwise we will access llsec mib which isn't initialized for
monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-10-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ieee802154/nl802154.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c
index 4f6777193029..66785e1eb559 100644
--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -1874,6 +1874,11 @@ nl802154_dump_llsec_devkey(struct sk_buff *skb, struct netlink_callback *cb)
 	if (err)
 		return err;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR) {
+		err = skb->len;
+		goto out_err;
+	}
+
 	if (!wpan_dev->netdev) {
 		err = -EINVAL;
 		goto out_err;
-- 
2.30.2

[PATCH 5.4 31/73] net: ieee802154: forbid monitor for add llsec devkey

[Greg Kroah-Hartman]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit a347b3b394868fef15b16f143719df56184be81d ]

This patch forbids to add llsec devkey for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-11-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ieee802154/nl802154.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c
index 66785e1eb559..65987215dd0c 100644
--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -1936,6 +1936,9 @@ static int nl802154_add_llsec_devkey(struct sk_buff *skb, struct genl_info *info
 	struct ieee802154_llsec_device_key key;
 	__le64 extended_addr;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR)
+		return -EOPNOTSUPP;
+
 	if (!info->attrs[NL802154_ATTR_SEC_DEVKEY] ||
 	    nla_parse_nested_deprecated(attrs, NL802154_DEVKEY_ATTR_MAX, info->attrs[NL802154_ATTR_SEC_DEVKEY], nl802154_devkey_policy, info->extack) < 0)
 		return -EINVAL;
-- 
2.30.2

[PATCH 5.4 32/73] net: ieee802154: forbid monitor for del llsec devkey

[Greg Kroah-Hartman]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit 6fb8045319ef172dc88a8142e7f8b58c7608137e ]

This patch forbids to del llsec devkey for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-12-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ieee802154/nl802154.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c
index 65987215dd0c..0c43b951a33f 100644
--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -1970,6 +1970,9 @@ static int nl802154_del_llsec_devkey(struct sk_buff *skb, struct genl_info *info
 	struct ieee802154_llsec_device_key key;
 	__le64 extended_addr;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR)
+		return -EOPNOTSUPP;
+
 	if (!info->attrs[NL802154_ATTR_SEC_DEVKEY] ||
 	    nla_parse_nested_deprecated(attrs, NL802154_DEVKEY_ATTR_MAX, info->attrs[NL802154_ATTR_SEC_DEVKEY], nl802154_devkey_policy, info->extack))
 		return -EINVAL;
-- 
2.30.2

[PATCH 5.4 33/73] net: ieee802154: stop dump llsec seclevels for monitors

[Greg Kroah-Hartman]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit 4c9b4f55ad1f5a4b6206ac4ea58f273126d21925 ]

This patch stops dumping llsec seclevels for monitors which we don't
support yet. Otherwise we will access llsec mib which isn't initialized
for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-13-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ieee802154/nl802154.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c
index 0c43b951a33f..4dd936c7db8b 100644
--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -2047,6 +2047,11 @@ nl802154_dump_llsec_seclevel(struct sk_buff *skb, struct netlink_callback *cb)
 	if (err)
 		return err;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR) {
+		err = skb->len;
+		goto out_err;
+	}
+
 	if (!wpan_dev->netdev) {
 		err = -EINVAL;
 		goto out_err;
-- 
2.30.2

[PATCH 5.4 34/73] net: ieee802154: forbid monitor for add llsec seclevel

[Greg Kroah-Hartman]

From: Alexander Aring <aahringo@redhat.com>

[ Upstream commit 9ec87e322428d4734ac647d1a8e507434086993d ]

This patch forbids to add llsec seclevel for monitor interfaces which we
don't support yet. Otherwise we will access llsec mib which isn't
initialized for monitors.

Signed-off-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210405003054.256017-14-aahringo@redhat.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ieee802154/nl802154.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/ieee802154/nl802154.c b/net/ieee802154/nl802154.c
index 4dd936c7db8b..328bb9f5342e 100644
--- a/net/ieee802154/nl802154.c
+++ b/net/ieee802154/nl802154.c
@@ -2136,6 +2136,9 @@ static int nl802154_add_llsec_seclevel(struct sk_buff *skb,
 	struct wpan_dev *wpan_dev = dev->ieee802154_ptr;
 	struct ieee802154_llsec_seclevel sl;
 
+	if (wpan_dev->iftype == NL802154_IFTYPE_MONITOR)
+		return -EOPNOTSUPP;
+
 	if (llsec_parse_seclevel(info->attrs[NL802154_ATTR_SEC_LEVEL],
 				 &sl) < 0)
 		return -EINVAL;
-- 
2.30.2

[PATCH 5.4 35/73] pcnet32: Use pci_resource_len to validate PCI resource

[Greg Kroah-Hartman]

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 66c3f05ddc538ee796321210c906b6ae6fc0792a ]

pci_resource_start() is not a good indicator to determine if a PCI
resource exists or not, since the resource may start at address 0.
This is seen when trying to instantiate the driver in qemu for riscv32
or riscv64.

pci 0000:00:01.0: reg 0x10: [io  0x0000-0x001f]
pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000001f]
...
pcnet32: card has no PCI IO resources, aborting

Use pci_resouce_len() instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/pcnet32.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/amd/pcnet32.c b/drivers/net/ethernet/amd/pcnet32.c
index f5ad12c10934..da84660ceae1 100644
--- a/drivers/net/ethernet/amd/pcnet32.c
+++ b/drivers/net/ethernet/amd/pcnet32.c
@@ -1548,8 +1548,7 @@ pcnet32_probe_pci(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 	pci_set_master(pdev);
 
-	ioaddr = pci_resource_start(pdev, 0);
-	if (!ioaddr) {
+	if (!pci_resource_len(pdev, 0)) {
 		if (pcnet32_debug & NETIF_MSG_PROBE)
 			pr_err("card has no PCI IO resources, aborting\n");
 		err = -ENODEV;
@@ -1562,6 +1561,8 @@ pcnet32_probe_pci(struct pci_dev *pdev, const struct pci_device_id *ent)
 			pr_err("architecture does not support 32bit PCI busmaster DMA\n");
 		goto err_disable_dev;
 	}
+
+	ioaddr = pci_resource_start(pdev, 0);
 	if (!request_region(ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_pci")) {
 		if (pcnet32_debug & NETIF_MSG_PROBE)
 			pr_err("io address range already allocated\n");
-- 
2.30.2

[PATCH 5.4 36/73] net/rds: Avoid potential use after free in rds_send_remove_from_sock

[Greg Kroah-Hartman]

From: Aditya Pakki <pakki001@umn.edu>

[ Upstream commit 0c85a7e87465f2d4cbc768e245f4f45b2f299b05 ]

In case of rs failure in rds_send_remove_from_sock(), the 'rm' resource
is freed and later under spinlock, causing potential use-after-free.
Set the free pointer to NULL to avoid undefined behavior.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rds/message.c | 1 +
 net/rds/send.c    | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/rds/message.c b/net/rds/message.c
index 92b6b22884d4..ed1d2255ce5a 100644
--- a/net/rds/message.c
+++ b/net/rds/message.c
@@ -180,6 +180,7 @@ void rds_message_put(struct rds_message *rm)
 		rds_message_purge(rm);
 
 		kfree(rm);
+		rm = NULL;
 	}
 }
 EXPORT_SYMBOL_GPL(rds_message_put);
diff --git a/net/rds/send.c b/net/rds/send.c
index 68e2bdb08fd0..aa3bc081773f 100644
--- a/net/rds/send.c
+++ b/net/rds/send.c
@@ -665,7 +665,7 @@ static void rds_send_remove_from_sock(struct list_head *messages, int status)
 unlock_and_drop:
 		spin_unlock_irqrestore(&rm->m_rs_lock, flags);
 		rds_message_put(rm);
-		if (was_on_sock)
+		if (was_on_sock && rm)
 			rds_message_put(rm);
 	}
 
-- 
2.30.2

[PATCH 5.4 37/73] net: tipc: Fix spelling errors in net/tipc module

[Greg Kroah-Hartman]

From: Zheng Yongjun <zhengyongjun3@huawei.com>

[ Upstream commit a79ace4b312953c5835fafb12adc3cb6878b26bd ]

These patches fix a series of spelling errors in net/tipc module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/bearer.h | 6 +++---
 net/tipc/net.c    | 2 +-
 net/tipc/node.c   | 2 +-
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/net/tipc/bearer.h b/net/tipc/bearer.h
index ea0f3c49cbed..a7b4cf66dfc2 100644
--- a/net/tipc/bearer.h
+++ b/net/tipc/bearer.h
@@ -149,9 +149,9 @@ struct tipc_media {
  * care of initializing all other fields.
  */
 struct tipc_bearer {
-	void __rcu *media_ptr;			/* initalized by media */
-	u32 mtu;				/* initalized by media */
-	struct tipc_media_addr addr;		/* initalized by media */
+	void __rcu *media_ptr;			/* initialized by media */
+	u32 mtu;				/* initialized by media */
+	struct tipc_media_addr addr;		/* initialized by media */
 	char name[TIPC_MAX_BEARER_NAME];
 	struct tipc_media *media;
 	struct tipc_media_addr bcast_addr;
diff --git a/net/tipc/net.c b/net/tipc/net.c
index 2498ce8b83c1..2600be4b0d89 100644
--- a/net/tipc/net.c
+++ b/net/tipc/net.c
@@ -89,7 +89,7 @@
  *     - A spin lock to protect the registry of kernel/driver users (reg.c)
  *     - A global spin_lock (tipc_port_lock), which only task is to ensure
  *       consistency where more than one port is involved in an operation,
- *       i.e., whe a port is part of a linked list of ports.
+ *       i.e., when a port is part of a linked list of ports.
  *       There are two such lists; 'port_list', which is used for management,
  *       and 'wait_list', which is used to queue ports during congestion.
  *
diff --git a/net/tipc/node.c b/net/tipc/node.c
index c8f6177dd5a2..47f7c8e856c6 100644
--- a/net/tipc/node.c
+++ b/net/tipc/node.c
@@ -1482,7 +1482,7 @@ int tipc_node_xmit(struct net *net, struct sk_buff_head *list,
 }
 
 /* tipc_node_xmit_skb(): send single buffer to destination
- * Buffers sent via this functon are generally TIPC_SYSTEM_IMPORTANCE
+ * Buffers sent via this function are generally TIPC_SYSTEM_IMPORTANCE
  * messages, which will not be rejected
  * The only exception is datagram messages rerouted after secondary
  * lookup, which are rare and safe to dispose of anyway.
-- 
2.30.2

[PATCH 5.4 38/73] mac80211: clear sta->fast_rx when STA removed from 4-addr VLAN

[Greg Kroah-Hartman]

From: Seevalamuthu Mariappan <seevalam@codeaurora.org>

[ Upstream commit dd0b45538146cb6a54d6da7663b8c3afd16ebcfd ]

In some race conditions, with more clients and traffic configuration,
below crash is seen when making the interface down. sta->fast_rx wasn't
cleared when STA gets removed from 4-addr AP_VLAN interface. The crash is
due to try accessing 4-addr AP_VLAN interface's net_device (fast_rx->dev)
which has been deleted already.

Resolve this by clearing sta->fast_rx pointer when STA removes
from a 4-addr VLAN.

[  239.449529] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[  239.449531] pgd = 80204000
...
[  239.481496] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.60 #227
[  239.481591] Hardware name: Generic DT based system
[  239.487665] task: be05b700 ti: be08e000 task.ti: be08e000
[  239.492360] PC is at get_rps_cpu+0x2d4/0x31c
[  239.497823] LR is at 0xbe08fc54
...
[  239.778574] [<80739740>] (get_rps_cpu) from [<8073cb10>] (netif_receive_skb_internal+0x8c/0xac)
[  239.786722] [<8073cb10>] (netif_receive_skb_internal) from [<8073d578>] (napi_gro_receive+0x48/0xc4)
[  239.795267] [<8073d578>] (napi_gro_receive) from [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames+0xbcc/0x12d4 [mac80211])
[  239.804776] [<c7b83e8c>] (ieee80211_mark_rx_ba_filtered_frames [mac80211]) from [<c7b84d4c>] (ieee80211_rx_napi+0x7b8/0x8c8 [mac8
            0211])
[  239.815857] [<c7b84d4c>] (ieee80211_rx_napi [mac80211]) from [<c7f63d7c>] (ath11k_dp_process_rx+0x7bc/0x8c8 [ath11k])
[  239.827757] [<c7f63d7c>] (ath11k_dp_process_rx [ath11k]) from [<c7f5b6c4>] (ath11k_dp_service_srng+0x2c0/0x2e0 [ath11k])
[  239.838484] [<c7f5b6c4>] (ath11k_dp_service_srng [ath11k]) from [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll+0x20/0x84 [ath11k_ahb]
            )
[  239.849419] [<7f55b7dc>] (ath11k_ahb_ext_grp_napi_poll [ath11k_ahb]) from [<8073ce1c>] (net_rx_action+0xe0/0x28c)
[  239.860945] [<8073ce1c>] (net_rx_action) from [<80324868>] (__do_softirq+0xe4/0x228)
[  239.871269] [<80324868>] (__do_softirq) from [<80324c48>] (irq_exit+0x98/0x108)
[  239.879080] [<80324c48>] (irq_exit) from [<8035c59c>] (__handle_domain_irq+0x90/0xb4)
[  239.886114] [<8035c59c>] (__handle_domain_irq) from [<8030137c>] (gic_handle_irq+0x50/0x94)
[  239.894100] [<8030137c>] (gic_handle_irq) from [<803024c0>] (__irq_svc+0x40/0x74)

Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Link: https://lore.kernel.org/r/1616163532-3881-1-git-send-email-seevalam@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/cfg.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 677928bf13d1..1b50bbf030ed 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1670,8 +1670,10 @@ static int ieee80211_change_station(struct wiphy *wiphy,
 		}
 
 		if (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN &&
-		    sta->sdata->u.vlan.sta)
+		    sta->sdata->u.vlan.sta) {
+			ieee80211_clear_fast_rx(sta);
 			RCU_INIT_POINTER(sta->sdata->u.vlan.sta, NULL);
+		}
 
 		if (test_sta_flag(sta, WLAN_STA_AUTHORIZED))
 			ieee80211_vif_dec_num_mcast(sta->sdata);
-- 
2.30.2

[PATCH 5.4 39/73] virt_wifi: Return micros for BSS TSF values

[Greg Kroah-Hartman]

From: A. Cody Schuffelen <schuffelen@google.com>

[ Upstream commit b57aa17f07c9270e576ef7df09f142978b5a75f0 ]

cfg80211_inform_bss expects to receive a TSF value, but is given the
time since boot in nanoseconds. TSF values are expected to be at
microsecond scale rather than nanosecond scale.

Signed-off-by: A. Cody Schuffelen <schuffelen@google.com>
Link: https://lore.kernel.org/r/20210318200419.1421034-1-schuffelen@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/virt_wifi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/virt_wifi.c b/drivers/net/wireless/virt_wifi.c
index 01305ba2d3aa..9d04ca53229b 100644
--- a/drivers/net/wireless/virt_wifi.c
+++ b/drivers/net/wireless/virt_wifi.c
@@ -12,6 +12,7 @@
 #include <net/cfg80211.h>
 #include <net/rtnetlink.h>
 #include <linux/etherdevice.h>
+#include <linux/math64.h>
 #include <linux/module.h>
 
 static struct wiphy *common_wiphy;
@@ -168,11 +169,11 @@ static void virt_wifi_scan_result(struct work_struct *work)
 			     scan_result.work);
 	struct wiphy *wiphy = priv_to_wiphy(priv);
 	struct cfg80211_scan_info scan_info = { .aborted = false };
+	u64 tsf = div_u64(ktime_get_boottime_ns(), 1000);
 
 	informed_bss = cfg80211_inform_bss(wiphy, &channel_5ghz,
 					   CFG80211_BSS_FTYPE_PRESP,
-					   fake_router_bssid,
-					   ktime_get_boottime_ns(),
+					   fake_router_bssid, tsf,
 					   WLAN_CAPABILITY_ESS, 0,
 					   (void *)&ssid, sizeof(ssid),
 					   DBM_TO_MBM(-50), GFP_KERNEL);
-- 
2.30.2

[PATCH 5.4 40/73] Input: s6sy761 - fix coordinate read bit shift

[Greg Kroah-Hartman]

From: Caleb Connolly <caleb@connolly.tech>

commit 30b3f68715595dee7fe4d9bd91a2252c3becdf0a upstream.

The touch coordinate register contains the following:

        byte 3             byte 2             byte 1
+--------+--------+ +-----------------+ +-----------------+
|        |        | |                 | |                 |
| X[3:0] | Y[3:0] | |     Y[11:4]     | |     X[11:4]     |
|        |        | |                 | |                 |
+--------+--------+ +-----------------+ +-----------------+

Bytes 2 and 1 need to be shifted left by 4 bits, the least significant
nibble of each is stored in byte 3. Currently they are only
being shifted by 3 causing the reported coordinates to be incorrect.

This matches downstream examples, and has been confirmed on my
device (OnePlus 7 Pro).

Fixes: 0145a7141e59 ("Input: add support for the Samsung S6SY761 touchscreen")
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Reviewed-by: Andi Shyti <andi@etezian.org>
Link: https://lore.kernel.org/r/20210305185710.225168-1-caleb@connolly.tech
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/touchscreen/s6sy761.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/input/touchscreen/s6sy761.c
+++ b/drivers/input/touchscreen/s6sy761.c
@@ -145,8 +145,8 @@ static void s6sy761_report_coordinates(s
 	u8 major = event[4];
 	u8 minor = event[5];
 	u8 z = event[6] & S6SY761_MASK_Z;
-	u16 x = (event[1] << 3) | ((event[3] & S6SY761_MASK_X) >> 4);
-	u16 y = (event[2] << 3) | (event[3] & S6SY761_MASK_Y);
+	u16 x = (event[1] << 4) | ((event[3] & S6SY761_MASK_X) >> 4);
+	u16 y = (event[2] << 4) | (event[3] & S6SY761_MASK_Y);
 
 	input_mt_slot(sdata->input, tid);
 

[PATCH 5.4 41/73] Input: i8042 - fix Pegatron C15B ID entry

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit daa58c8eec0a65ac8e2e77ff3ea8a233d8eec954 upstream.

The Zenbook Flip entry that was added overwrites a previous one
because of a typo:

In file included from drivers/input/serio/i8042.h:23,
                 from drivers/input/serio/i8042.c:131:
drivers/input/serio/i8042-x86ia64io.h:591:28: error: initialized field overwritten [-Werror=override-init]
  591 |                 .matches = {
      |                            ^
drivers/input/serio/i8042-x86ia64io.h:591:28: note: (near initialization for 'i8042_dmi_noselftest_table[0].matches')

Add the missing separator between the two.

Fixes: b5d6e7ab7fe7 ("Input: i8042 - add ASUS Zenbook Flip to noselftest list")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Link: https://lore.kernel.org/r/20210323130623.2302402-1-arnd@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/serio/i8042-x86ia64io.h |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -588,6 +588,7 @@ static const struct dmi_system_id i8042_
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 			DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */
 		},
+	}, {
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 			DMI_MATCH(DMI_CHASSIS_TYPE, "31"), /* Convertible Notebook */

[PATCH 5.4 42/73] HID: wacom: set EV_KEY and EV_ABS only for non-HID_GENERIC type of devices

[Greg Kroah-Hartman]

From: Ping Cheng <pinglinux@gmail.com>

commit 276559d8d02c2709281578976ca2f53bc62063d4 upstream.

Valid HID_GENERIC type of devices set EV_KEY and EV_ABS by wacom_map_usage.
When *_input_capabilities are reached, those devices should already have
their proper EV_* set. EV_KEY and EV_ABS only need to be set for
non-HID_GENERIC type of devices in *_input_capabilities.

Devices that don't support HID descitoprs will pass back to hid-input for
registration without being accidentally rejected by the introduction of
patch: "Input: refuse to register absolute devices without absinfo"

Fixes: 6ecfe51b4082 ("Input: refuse to register absolute devices without absinfo")
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <Jason.Gerecke@wacom.com>
Tested-by: Juan Garrido <Juan.Garrido@wacom.com>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/wacom_wac.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -3574,8 +3574,6 @@ int wacom_setup_pen_input_capabilities(s
 {
 	struct wacom_features *features = &wacom_wac->features;
 
-	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-
 	if (!(features->device_type & WACOM_DEVICETYPE_PEN))
 		return -ENODEV;
 
@@ -3590,6 +3588,7 @@ int wacom_setup_pen_input_capabilities(s
 		return 0;
 	}
 
+	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 	__set_bit(BTN_TOUCH, input_dev->keybit);
 	__set_bit(ABS_MISC, input_dev->absbit);
 
@@ -3742,8 +3741,6 @@ int wacom_setup_touch_input_capabilities
 {
 	struct wacom_features *features = &wacom_wac->features;
 
-	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-
 	if (!(features->device_type & WACOM_DEVICETYPE_TOUCH))
 		return -ENODEV;
 
@@ -3756,6 +3753,7 @@ int wacom_setup_touch_input_capabilities
 		/* setup has already been done */
 		return 0;
 
+	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 	__set_bit(BTN_TOUCH, input_dev->keybit);
 
 	if (features->touch_max == 1) {

[PATCH 5.4 43/73] dm verity fec: fix misaligned RS roots IO

[Greg Kroah-Hartman]

From: Jaegeuk Kim <jaegeuk@google.com>

commit 8ca7cab82bda4eb0b8064befeeeaa38106cac637 upstream.

commit df7b59ba9245 ("dm verity: fix FEC for RS roots unaligned to
block size") introduced the possibility for misaligned roots IO
relative to the underlying device's logical block size. E.g. Android's
default RS roots=2 results in dm_bufio->block_size=1024, which causes
the following EIO if the logical block size of the device is 4096,
given v->data_dev_block_bits=12:

E sd 0    : 0:0:0: [sda] tag#30 request not aligned to the logical block size
E blk_update_request: I/O error, dev sda, sector 10368424 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
E device-mapper: verity-fec: 254:8: FEC 9244672: parity read failed (block 18056): -5

Fix this by onlu using f->roots for dm_bufio blocksize IFF it is
aligned to v->data_dev_block_bits.

Fixes: df7b59ba9245 ("dm verity: fix FEC for RS roots unaligned to block size")
Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-verity-fec.c |   11 ++++++++---
 drivers/md/dm-verity-fec.h |    1 +
 2 files changed, 9 insertions(+), 3 deletions(-)

--- a/drivers/md/dm-verity-fec.c
+++ b/drivers/md/dm-verity-fec.c
@@ -65,7 +65,7 @@ static u8 *fec_read_parity(struct dm_ver
 	u8 *res;
 
 	position = (index + rsb) * v->fec->roots;
-	block = div64_u64_rem(position, v->fec->roots << SECTOR_SHIFT, &rem);
+	block = div64_u64_rem(position, v->fec->io_size, &rem);
 	*offset = (unsigned)rem;
 
 	res = dm_bufio_read(v->fec->bufio, block, buf);
@@ -154,7 +154,7 @@ static int fec_decode_bufs(struct dm_ver
 
 		/* read the next block when we run out of parity bytes */
 		offset += v->fec->roots;
-		if (offset >= v->fec->roots << SECTOR_SHIFT) {
+		if (offset >= v->fec->io_size) {
 			dm_bufio_release(buf);
 
 			par = fec_read_parity(v, rsb, block_offset, &offset, &buf);
@@ -742,8 +742,13 @@ int verity_fec_ctr(struct dm_verity *v)
 		return -E2BIG;
 	}
 
+	if ((f->roots << SECTOR_SHIFT) & ((1 << v->data_dev_block_bits) - 1))
+		f->io_size = 1 << v->data_dev_block_bits;
+	else
+		f->io_size = v->fec->roots << SECTOR_SHIFT;
+
 	f->bufio = dm_bufio_client_create(f->dev->bdev,
-					  f->roots << SECTOR_SHIFT,
+					  f->io_size,
 					  1, 0, NULL, NULL);
 	if (IS_ERR(f->bufio)) {
 		ti->error = "Cannot initialize FEC bufio client";
--- a/drivers/md/dm-verity-fec.h
+++ b/drivers/md/dm-verity-fec.h
@@ -36,6 +36,7 @@ struct dm_verity_fec {
 	struct dm_dev *dev;	/* parity data device */
 	struct dm_bufio_client *data_bufio;	/* for data dev access */
 	struct dm_bufio_client *bufio;		/* for parity data access */
+	size_t io_size;		/* IO size for roots */
 	sector_t start;		/* parity data start in blocks */
 	sector_t blocks;	/* number of blocks covered */
 	sector_t rounds;	/* number of interleaving rounds */

[PATCH 5.4 44/73] readdir: make sure to verify directory entry for legacy interfaces too

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 0c93ac69407d63a85be0129aa55ffaec27ffebd3 upstream.

This does the directory entry name verification for the legacy
"fillonedir" (and compat) interface that goes all the way back to the
dark ages before we had a proper dirent, and the readdir() system call
returned just a single entry at a time.

Nobody should use this interface unless you still have binaries from
1991, but let's do it right.

This came up during discussions about unsafe_copy_to_user() and proper
checking of all the inputs to it, as the networking layer is looking to
use it in a few new places.  So let's make sure the _old_ users do it
all right and proper, before we add new ones.

See also commit 8a23eb804ca4 ("Make filldir[64]() verify the directory
entry filename is valid") which did the proper modern interfaces that
people actually use. It had a note:

    Note that I didn't bother adding the checks to any legacy interfaces
    that nobody uses.

which this now corrects.  Note that we really don't care about POSIX and
the presense of '/' in a directory entry, but verify_dirent_name() also
ends up doing the proper name length verification which is what the
input checking discussion was about.

[ Another option would be to remove the support for this particular very
  old interface: any binaries that use it are likely a.out binaries, and
  they will no longer run anyway since we removed a.out binftm support
  in commit eac616557050 ("x86: Deprecate a.out support").

  But I'm not sure which came first: getdents() or ELF support, so let's
  pretend somebody might still have a working binary that uses the
  legacy readdir() case.. ]

Link: https://lore.kernel.org/lkml/CAHk-=wjbvzCAhAtvG0d81W5o0-KT5PPTHhfJ5ieDFq+bGtgOYg@mail.gmail.com/
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/readdir.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/fs/readdir.c
+++ b/fs/readdir.c
@@ -150,6 +150,9 @@ static int fillonedir(struct dir_context
 
 	if (buf->result)
 		return -EINVAL;
+	buf->result = verify_dirent_name(name, namlen);
+	if (buf->result < 0)
+		return buf->result;
 	d_ino = ino;
 	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
 		buf->result = -EOVERFLOW;
@@ -417,6 +420,9 @@ static int compat_fillonedir(struct dir_
 
 	if (buf->result)
 		return -EINVAL;
+	buf->result = verify_dirent_name(name, namlen);
+	if (buf->result < 0)
+		return buf->result;
 	d_ino = ino;
 	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
 		buf->result = -EOVERFLOW;

[PATCH 5.4 45/73] arm64: fix inline asm in load_unaligned_zeropad()

[Greg Kroah-Hartman]

From: Peter Collingbourne <pcc@google.com>

commit 185f2e5f51c2029efd9dd26cceb968a44fe053c6 upstream.

The inline asm's addr operand is marked as input-only, however in
the case where an exception is taken it may be modified by the BIC
instruction on the exception path. Fix the problem by using a temporary
register as the destination register for the BIC instruction.

Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: stable@vger.kernel.org
Link: https://linux-review.googlesource.com/id/I84538c8a2307d567b4f45bb20b715451005f9617
Link: https://lore.kernel.org/r/20210401165110.3952103-1-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/include/asm/word-at-a-time.h |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/arch/arm64/include/asm/word-at-a-time.h
+++ b/arch/arm64/include/asm/word-at-a-time.h
@@ -53,7 +53,7 @@ static inline unsigned long find_zero(un
  */
 static inline unsigned long load_unaligned_zeropad(const void *addr)
 {
-	unsigned long ret, offset;
+	unsigned long ret, tmp;
 
 	/* Load word from unaligned pointer addr */
 	asm(
@@ -61,9 +61,9 @@ static inline unsigned long load_unalign
 	"2:\n"
 	"	.pushsection .fixup,\"ax\"\n"
 	"	.align 2\n"
-	"3:	and	%1, %2, #0x7\n"
-	"	bic	%2, %2, #0x7\n"
-	"	ldr	%0, [%2]\n"
+	"3:	bic	%1, %2, #0x7\n"
+	"	ldr	%0, [%1]\n"
+	"	and	%1, %2, #0x7\n"
 	"	lsl	%1, %1, #0x3\n"
 #ifndef __AARCH64EB__
 	"	lsr	%0, %0, %1\n"
@@ -73,7 +73,7 @@ static inline unsigned long load_unalign
 	"	b	2b\n"
 	"	.popsection\n"
 	_ASM_EXTABLE(1b, 3b)
-	: "=&r" (ret), "=&r" (offset)
+	: "=&r" (ret), "=&r" (tmp)
 	: "r" (addr), "Q" (*(unsigned long *)addr));
 
 	return ret;

[PATCH 5.4 46/73] arm64: alternatives: Move length validation in alternative_{insn, endif}

[Greg Kroah-Hartman]

From: Nathan Chancellor <nathan@kernel.org>

commit 22315a2296f4c251fa92aec45fbbae37e9301b6c upstream.

After commit 2decad92f473 ("arm64: mte: Ensure TIF_MTE_ASYNC_FAULT is
set atomically"), LLVM's integrated assembler fails to build entry.S:

<instantiation>:5:7: error: expected assembly-time absolute expression
 .org . - (664b-663b) + (662b-661b)
      ^
<instantiation>:6:7: error: expected assembly-time absolute expression
 .org . - (662b-661b) + (664b-663b)
      ^

The root cause is LLVM's assembler has a one-pass design, meaning it
cannot figure out these instruction lengths when the .org directive is
outside of the subsection that they are in, which was changed by the
.arch_extension directive added in the above commit.

Apply the same fix from commit 966a0acce2fc ("arm64/alternatives: move
length validation inside the subsection") to the alternative_endif
macro, shuffling the .org directives so that the length validation
happen will always happen in the same subsections. alternative_insn has
not shown any issue yet but it appears that it could have the same issue
in the future so just preemptively change it.

Fixes: f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences")
Cc: <stable@vger.kernel.org> # 5.8.x
Link: https://github.com/ClangBuiltLinux/linux/issues/1347
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210414000803.662534-1-nathan@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/include/asm/alternative.h |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/arm64/include/asm/alternative.h
+++ b/arch/arm64/include/asm/alternative.h
@@ -119,9 +119,9 @@ static inline void apply_alternatives_mo
 	.popsection
 	.subsection 1
 663:	\insn2
-664:	.previous
-	.org	. - (664b-663b) + (662b-661b)
+664:	.org	. - (664b-663b) + (662b-661b)
 	.org	. - (662b-661b) + (664b-663b)
+	.previous
 	.endif
 .endm
 
@@ -191,11 +191,11 @@ static inline void apply_alternatives_mo
  */
 .macro alternative_endif
 664:
+	.org	. - (664b-663b) + (662b-661b)
+	.org	. - (662b-661b) + (664b-663b)
 	.if .Lasm_alt_mode==0
 	.previous
 	.endif
-	.org	. - (664b-663b) + (662b-661b)
-	.org	. - (662b-661b) + (664b-663b)
 .endm
 
 /*

[PATCH 5.4 47/73] vfio/pci: Add missing range check in vfio_pci_mmap

[Greg Kroah-Hartman]

From: Christian A. Ehrhardt <lk@c--e.de>

commit 909290786ea335366e21d7f1ed5812b90f2f0a92 upstream.

When mmaping an extra device region verify that the region index
derived from the mmap offset is valid.

Fixes: a15b1883fee1 ("vfio_pci: Allow mapping extra regions")
Cc: stable@vger.kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Message-Id: <20210412214124.GA241759@lisa.in-ulm.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vfio/pci/vfio_pci.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -1474,6 +1474,8 @@ static int vfio_pci_mmap(void *device_da
 
 	index = vma->vm_pgoff >> (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT);
 
+	if (index >= VFIO_PCI_NUM_REGIONS + vdev->num_regions)
+		return -EINVAL;
 	if (vma->vm_end < vma->vm_start)
 		return -EINVAL;
 	if ((vma->vm_flags & VM_SHARED) == 0)
@@ -1482,7 +1484,7 @@ static int vfio_pci_mmap(void *device_da
 		int regnum = index - VFIO_PCI_NUM_REGIONS;
 		struct vfio_pci_region *region = vdev->region + regnum;
 
-		if (region && region->ops && region->ops->mmap &&
+		if (region->ops && region->ops->mmap &&
 		    (region->flags & VFIO_REGION_INFO_FLAG_MMAP))
 			return region->ops->mmap(vdev, region, vma);
 		return -EINVAL;

[PATCH 5.4 48/73] riscv: Fix spelling mistake "SPARSEMEM" to "SPARSMEM"

[Greg Kroah-Hartman]

From: Kefeng Wang <wangkefeng.wang@huawei.com>

commit 199fc6b8dee7d6d50467a57e0dc7e3e1b7d59966 upstream.

There is a spelling mistake when SPARSEMEM Kconfig copy.

Fixes: a5406a7ff56e ("riscv: Correct SPARSEMEM configuration")
Cc: stable@vger.kernel.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/riscv/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -101,7 +101,7 @@ config ARCH_FLATMEM_ENABLE
 config ARCH_SPARSEMEM_ENABLE
 	def_bool y
 	depends on MMU
-	select SPARSEMEM_STATIC if 32BIT && SPARSMEM
+	select SPARSEMEM_STATIC if 32BIT && SPARSEMEM
 	select SPARSEMEM_VMEMMAP_ENABLE if 64BIT
 
 config ARCH_SELECT_MEMORY_MODEL

[PATCH 5.4 49/73] scsi: libsas: Reset num_scatter if libata marks qc as NODATA

[Greg Kroah-Hartman]

From: Jolly Shah <jollys@google.com>

commit 176ddd89171ddcf661862d90c5d257877f7326d6 upstream.

When the cache_type for the SCSI device is changed, the SCSI layer issues a
MODE_SELECT command. The caching mode details are communicated via a
request buffer associated with the SCSI command with data direction set as
DMA_TO_DEVICE (scsi_mode_select()). When this command reaches the libata
layer, as a part of generic initial setup, libata layer sets up the
scatterlist for the command using the SCSI command (ata_scsi_qc_new()).
This command is then translated by the libata layer into
ATA_CMD_SET_FEATURES (ata_scsi_mode_select_xlat()). The libata layer treats
this as a non-data command (ata_mselect_caching()), since it only needs an
ATA taskfile to pass the caching on/off information to the device. It does
not need the scatterlist that has been setup, so it does not perform
dma_map_sg() on the scatterlist (ata_qc_issue()). Unfortunately, when this
command reaches the libsas layer (sas_ata_qc_issue()), libsas layer sees it
as a non-data command with a scatterlist. It cannot extract the correct DMA
length since the scatterlist has not been mapped with dma_map_sg() for a
DMA operation. When this partially constructed SAS task reaches pm80xx
LLDD, it results in the following warning:

"pm80xx_chip_sata_req 6058: The sg list address
start_addr=0x0000000000000000 data_len=0x0end_addr_high=0xffffffff
end_addr_low=0xffffffff has crossed 4G boundary"

Update libsas to handle ATA non-data commands separately so num_scatter and
total_xfer_len remain 0.

Link: https://lore.kernel.org/r/20210318225632.2481291-1-jollys@google.com
Fixes: 53de092f47ff ("scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA")
Tested-by: Luo Jiaxing <luojiaxing@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jolly Shah <jollys@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/libsas/sas_ata.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -200,18 +200,17 @@ static unsigned int sas_ata_qc_issue(str
 		memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);
 		task->total_xfer_len = qc->nbytes;
 		task->num_scatter = qc->n_elem;
+		task->data_dir = qc->dma_dir;
+	} else if (qc->tf.protocol == ATA_PROT_NODATA) {
+		task->data_dir = DMA_NONE;
 	} else {
 		for_each_sg(qc->sg, sg, qc->n_elem, si)
 			xfer += sg_dma_len(sg);
 
 		task->total_xfer_len = xfer;
 		task->num_scatter = si;
-	}
-
-	if (qc->tf.protocol == ATA_PROT_NODATA)
-		task->data_dir = DMA_NONE;
-	else
 		task->data_dir = qc->dma_dir;
+	}
 	task->scatter = qc->sg;
 	task->ata_task.retry_count = 1;
 	task->task_state_flags = SAS_TASK_STATE_PENDING;

[PATCH 5.4 50/73] netfilter: conntrack: do not print icmpv6 as unknown via /proc

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit fbea31808ca124dd73ff6bb1e67c9af4607c3e32 upstream.

/proc/net/nf_conntrack shows icmpv6 as unknown.

Fixes: 09ec82f5af99 ("netfilter: conntrack: remove protocol name from l4proto struct")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nf_conntrack_standalone.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -266,6 +266,7 @@ static const char* l4proto_name(u16 prot
 	case IPPROTO_GRE: return "gre";
 	case IPPROTO_SCTP: return "sctp";
 	case IPPROTO_UDPLITE: return "udplite";
+	case IPPROTO_ICMPV6: return "icmpv6";
 	}
 
 	return "unknown";

[PATCH 5.4 51/73] libnvdimm/region: Fix nvdimm_has_flush() to handle ND_REGION_ASYNC

[Greg Kroah-Hartman]

From: Vaibhav Jain <vaibhav@linux.ibm.com>

commit a2948b17f6b936fc52f86c0f92c46d2f91928b79 upstream.

In case a platform doesn't provide explicit flush-hints but provides an
explicit flush callback via ND_REGION_ASYNC region flag, then
nvdimm_has_flush() still returns '0' indicating that writes do not
require flushing. This happens on PPC64 with patch at [1] applied, where
'deep_flush' of a region was denied even though an explicit flush
function was provided.

Fix this by adding a condition to nvdimm_has_flush() to test for the
ND_REGION_ASYNC flag on the region and see if a 'region->flush' callback
is assigned.

Link: http://lore.kernel.org/r/161703936121.36.7260632399582101498.stgit@e1fbed493c87 [1]
Fixes: c5d4355d10d4 ("libnvdimm: nd_region flush callback support")
Reported-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Link: https://lore.kernel.org/r/20210402092555.208590-1-vaibhav@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvdimm/region_devs.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/nvdimm/region_devs.c
+++ b/drivers/nvdimm/region_devs.c
@@ -1142,6 +1142,11 @@ int nvdimm_has_flush(struct nd_region *n
 			|| !IS_ENABLED(CONFIG_ARCH_HAS_PMEM_API))
 		return -ENXIO;
 
+	/* Test if an explicit flush function is defined */
+	if (test_bit(ND_REGION_ASYNC, &nd_region->flags) && nd_region->flush)
+		return 1;
+
+	/* Test if any flush hints for the region are available */
 	for (i = 0; i < nd_region->ndr_mappings; i++) {
 		struct nd_mapping *nd_mapping = &nd_region->mapping[i];
 		struct nvdimm *nvdimm = nd_mapping->nvdimm;
@@ -1152,8 +1157,8 @@ int nvdimm_has_flush(struct nd_region *n
 	}
 
 	/*
-	 * The platform defines dimm devices without hints, assume
-	 * platform persistence mechanism like ADR
+	 * The platform defines dimm devices without hints nor explicit flush,
+	 * assume platform persistence mechanism like ADR
 	 */
 	return 0;
 }

[PATCH 5.4 52/73] netfilter: bridge: add pre_exit hooks for ebtable unregistration

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

commit 7ee3c61dcd28bf6e290e06ad382f13511dc790e9 upstream.

Just like ip/ip6/arptables, the hooks have to be removed, then
synchronize_rcu() has to be called to make sure no more packets are being
processed before the ruleset data is released.

Place the hook unregistration in the pre_exit hook, then call the new
ebtables pre_exit function from there.

Years ago, when first netns support got added for netfilter+ebtables,
this used an older (now removed) netfilter hook unregister API, that did
a unconditional synchronize_rcu().

Now that all is done with call_rcu, ebtable_{filter,nat,broute} pernet exit
handlers may free the ebtable ruleset while packets are still in flight.

This can only happens on module removal, not during netns exit.

The new function expects the table name, not the table struct.

This is because upcoming patch set (targeting -next) will remove all
net->xt.{nat,filter,broute}_table instances, this makes it necessary
to avoid external references to those member variables.

The existing APIs will be converted, so follow the upcoming scheme of
passing name + hook type instead.

Fixes: aee12a0a3727e ("ebtables: remove nf_hook_register usage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/netfilter_bridge/ebtables.h |    5 +++--
 net/bridge/netfilter/ebtable_broute.c     |    8 +++++++-
 net/bridge/netfilter/ebtable_filter.c     |    8 +++++++-
 net/bridge/netfilter/ebtable_nat.c        |    8 +++++++-
 net/bridge/netfilter/ebtables.c           |   30 +++++++++++++++++++++++++++---
 5 files changed, 51 insertions(+), 8 deletions(-)

--- a/include/linux/netfilter_bridge/ebtables.h
+++ b/include/linux/netfilter_bridge/ebtables.h
@@ -110,8 +110,9 @@ extern int ebt_register_table(struct net
 			      const struct ebt_table *table,
 			      const struct nf_hook_ops *ops,
 			      struct ebt_table **res);
-extern void ebt_unregister_table(struct net *net, struct ebt_table *table,
-				 const struct nf_hook_ops *);
+extern void ebt_unregister_table(struct net *net, struct ebt_table *table);
+void ebt_unregister_table_pre_exit(struct net *net, const char *tablename,
+				   const struct nf_hook_ops *ops);
 extern unsigned int ebt_do_table(struct sk_buff *skb,
 				 const struct nf_hook_state *state,
 				 struct ebt_table *table);
--- a/net/bridge/netfilter/ebtable_broute.c
+++ b/net/bridge/netfilter/ebtable_broute.c
@@ -105,14 +105,20 @@ static int __net_init broute_net_init(st
 				  &net->xt.broute_table);
 }
 
+static void __net_exit broute_net_pre_exit(struct net *net)
+{
+	ebt_unregister_table_pre_exit(net, "broute", &ebt_ops_broute);
+}
+
 static void __net_exit broute_net_exit(struct net *net)
 {
-	ebt_unregister_table(net, net->xt.broute_table, &ebt_ops_broute);
+	ebt_unregister_table(net, net->xt.broute_table);
 }
 
 static struct pernet_operations broute_net_ops = {
 	.init = broute_net_init,
 	.exit = broute_net_exit,
+	.pre_exit = broute_net_pre_exit,
 };
 
 static int __init ebtable_broute_init(void)
--- a/net/bridge/netfilter/ebtable_filter.c
+++ b/net/bridge/netfilter/ebtable_filter.c
@@ -99,14 +99,20 @@ static int __net_init frame_filter_net_i
 				  &net->xt.frame_filter);
 }
 
+static void __net_exit frame_filter_net_pre_exit(struct net *net)
+{
+	ebt_unregister_table_pre_exit(net, "filter", ebt_ops_filter);
+}
+
 static void __net_exit frame_filter_net_exit(struct net *net)
 {
-	ebt_unregister_table(net, net->xt.frame_filter, ebt_ops_filter);
+	ebt_unregister_table(net, net->xt.frame_filter);
 }
 
 static struct pernet_operations frame_filter_net_ops = {
 	.init = frame_filter_net_init,
 	.exit = frame_filter_net_exit,
+	.pre_exit = frame_filter_net_pre_exit,
 };
 
 static int __init ebtable_filter_init(void)
--- a/net/bridge/netfilter/ebtable_nat.c
+++ b/net/bridge/netfilter/ebtable_nat.c
@@ -99,14 +99,20 @@ static int __net_init frame_nat_net_init
 				  &net->xt.frame_nat);
 }
 
+static void __net_exit frame_nat_net_pre_exit(struct net *net)
+{
+	ebt_unregister_table_pre_exit(net, "nat", ebt_ops_nat);
+}
+
 static void __net_exit frame_nat_net_exit(struct net *net)
 {
-	ebt_unregister_table(net, net->xt.frame_nat, ebt_ops_nat);
+	ebt_unregister_table(net, net->xt.frame_nat);
 }
 
 static struct pernet_operations frame_nat_net_ops = {
 	.init = frame_nat_net_init,
 	.exit = frame_nat_net_exit,
+	.pre_exit = frame_nat_net_pre_exit,
 };
 
 static int __init ebtable_nat_init(void)
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -1237,10 +1237,34 @@ out:
 	return ret;
 }
 
-void ebt_unregister_table(struct net *net, struct ebt_table *table,
-			  const struct nf_hook_ops *ops)
+static struct ebt_table *__ebt_find_table(struct net *net, const char *name)
+{
+	struct ebt_table *t;
+
+	mutex_lock(&ebt_mutex);
+
+	list_for_each_entry(t, &net->xt.tables[NFPROTO_BRIDGE], list) {
+		if (strcmp(t->name, name) == 0) {
+			mutex_unlock(&ebt_mutex);
+			return t;
+		}
+	}
+
+	mutex_unlock(&ebt_mutex);
+	return NULL;
+}
+
+void ebt_unregister_table_pre_exit(struct net *net, const char *name, const struct nf_hook_ops *ops)
+{
+	struct ebt_table *table = __ebt_find_table(net, name);
+
+	if (table)
+		nf_unregister_net_hooks(net, ops, hweight32(table->valid_hooks));
+}
+EXPORT_SYMBOL(ebt_unregister_table_pre_exit);
+
+void ebt_unregister_table(struct net *net, struct ebt_table *table)
 {
-	nf_unregister_net_hooks(net, ops, hweight32(table->valid_hooks));
 	__ebt_unregister_table(net, table);
 }
 

[PATCH 5.4 53/73] netfilter: arp_tables: add pre_exit hook for table unregister

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

commit d163a925ebbc6eb5b562b0f1d72c7e817aa75c40 upstream.

Same problem that also existed in iptables/ip(6)tables, when
arptable_filter is removed there is no longer a wait period before the
table/ruleset is free'd.

Unregister the hook in pre_exit, then remove the table in the exit
function.
This used to work correctly because the old nf_hook_unregister API
did unconditional synchronize_net.

The per-net hook unregister function uses call_rcu instead.

Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/netfilter_arp/arp_tables.h |    5 +++--
 net/ipv4/netfilter/arp_tables.c          |    9 +++++++--
 net/ipv4/netfilter/arptable_filter.c     |   10 +++++++++-
 3 files changed, 19 insertions(+), 5 deletions(-)

--- a/include/linux/netfilter_arp/arp_tables.h
+++ b/include/linux/netfilter_arp/arp_tables.h
@@ -52,8 +52,9 @@ extern void *arpt_alloc_initial_table(co
 int arpt_register_table(struct net *net, const struct xt_table *table,
 			const struct arpt_replace *repl,
 			const struct nf_hook_ops *ops, struct xt_table **res);
-void arpt_unregister_table(struct net *net, struct xt_table *table,
-			   const struct nf_hook_ops *ops);
+void arpt_unregister_table(struct net *net, struct xt_table *table);
+void arpt_unregister_table_pre_exit(struct net *net, struct xt_table *table,
+				    const struct nf_hook_ops *ops);
 extern unsigned int arpt_do_table(struct sk_buff *skb,
 				  const struct nf_hook_state *state,
 				  struct xt_table *table);
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -1580,10 +1580,15 @@ out_free:
 	return ret;
 }
 
-void arpt_unregister_table(struct net *net, struct xt_table *table,
-			   const struct nf_hook_ops *ops)
+void arpt_unregister_table_pre_exit(struct net *net, struct xt_table *table,
+				    const struct nf_hook_ops *ops)
 {
 	nf_unregister_net_hooks(net, ops, hweight32(table->valid_hooks));
+}
+EXPORT_SYMBOL(arpt_unregister_table_pre_exit);
+
+void arpt_unregister_table(struct net *net, struct xt_table *table)
+{
 	__arpt_unregister_table(net, table);
 }
 
--- a/net/ipv4/netfilter/arptable_filter.c
+++ b/net/ipv4/netfilter/arptable_filter.c
@@ -56,16 +56,24 @@ static int __net_init arptable_filter_ta
 	return err;
 }
 
+static void __net_exit arptable_filter_net_pre_exit(struct net *net)
+{
+	if (net->ipv4.arptable_filter)
+		arpt_unregister_table_pre_exit(net, net->ipv4.arptable_filter,
+					       arpfilter_ops);
+}
+
 static void __net_exit arptable_filter_net_exit(struct net *net)
 {
 	if (!net->ipv4.arptable_filter)
 		return;
-	arpt_unregister_table(net, net->ipv4.arptable_filter, arpfilter_ops);
+	arpt_unregister_table(net, net->ipv4.arptable_filter);
 	net->ipv4.arptable_filter = NULL;
 }
 
 static struct pernet_operations arptable_filter_net_ops = {
 	.exit = arptable_filter_net_exit,
+	.pre_exit = arptable_filter_net_pre_exit,
 };
 
 static int __init arptable_filter_init(void)

[PATCH 5.4 54/73] net: macb: fix the restore of cmp registers

[Greg Kroah-Hartman]

From: Claudiu Beznea <claudiu.beznea@microchip.com>

commit a714e27ea8bdee2b238748029d31472d0a65b611 upstream.

Commit a14d273ba159 ("net: macb: restore cmp registers on resume path")
introduces the restore of CMP registers on resume path. In case the IP
doesn't support type 2 screeners (zero on DCFG8 register) the
struct macb::rx_fs_list::list is not initialized and thus the
list_for_each_entry(item, &bp->rx_fs_list.list, list) loop introduced in
commit a14d273ba159 ("net: macb: restore cmp registers on resume path")
will access an uninitialized list leading to crash. Thus, initialize
the struct macb::rx_fs_list::list without taking into account if the
IP supports type 2 screeners or not.

Fixes: a14d273ba159 ("net: macb: restore cmp registers on resume path")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/cadence/macb_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -3590,6 +3590,7 @@ static int macb_init(struct platform_dev
 	reg = gem_readl(bp, DCFG8);
 	bp->max_tuples = min((GEM_BFEXT(SCR2CMP, reg) / 3),
 			GEM_BFEXT(T2SCR, reg));
+	INIT_LIST_HEAD(&bp->rx_fs_list.list);
 	if (bp->max_tuples > 0) {
 		/* also needs one ethtype match to check IPv4 */
 		if (GEM_BFEXT(SCR2ETH, reg) > 0) {
@@ -3600,7 +3601,6 @@ static int macb_init(struct platform_dev
 			/* Filtering is supported in hw but don't enable it in kernel now */
 			dev->hw_features |= NETIF_F_NTUPLE;
 			/* init Rx flow definitions */
-			INIT_LIST_HEAD(&bp->rx_fs_list.list);
 			bp->rx_fs_list.count = 0;
 			spin_lock_init(&bp->rx_fs_lock);
 		} else

[PATCH 5.4 55/73] netfilter: nft_limit: avoid possible divide error in nft_limit_init

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit b895bdf5d643b6feb7c60856326dd4feb6981560 upstream.

div_u64() divides u64 by u32.

nft_limit_init() wants to divide u64 by u64, use the appropriate
math function (div64_u64)

divide error: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 8390 Comm: syz-executor188 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:div_u64_rem include/linux/math64.h:28 [inline]
RIP: 0010:div_u64 include/linux/math64.h:127 [inline]
RIP: 0010:nft_limit_init+0x2a2/0x5e0 net/netfilter/nft_limit.c:85
Code: ef 4c 01 eb 41 0f 92 c7 48 89 de e8 38 a5 22 fa 4d 85 ff 0f 85 97 02 00 00 e8 ea 9e 22 fa 4c 0f af f3 45 89 ed 31 d2 4c 89 f0 <49> f7 f5 49 89 c6 e8 d3 9e 22 fa 48 8d 7d 48 48 b8 00 00 00 00 00
RSP: 0018:ffffc90009447198 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000200000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff875152e6 RDI: 0000000000000003
RBP: ffff888020f80908 R08: 0000200000000000 R09: 0000000000000000
R10: ffffffff875152d8 R11: 0000000000000000 R12: ffffc90009447270
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS:  000000000097a300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200001c4 CR3: 0000000026a52000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 nf_tables_newexpr net/netfilter/nf_tables_api.c:2675 [inline]
 nft_expr_init+0x145/0x2d0 net/netfilter/nf_tables_api.c:2713
 nft_set_elem_expr_alloc+0x27/0x280 net/netfilter/nf_tables_api.c:5160
 nf_tables_newset+0x1997/0x3150 net/netfilter/nf_tables_api.c:4321
 nfnetlink_rcv_batch+0x85a/0x21b0 net/netfilter/nfnetlink.c:456
 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:580 [inline]
 nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:598
 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:674
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: c26844eda9d4 ("netfilter: nf_tables: Fix nft limit burst handling")
Fixes: 3e0f64b7dd31 ("netfilter: nft_limit: fix packet ratelimiting")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Luigi Rizzo <lrizzo@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nft_limit.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/netfilter/nft_limit.c
+++ b/net/netfilter/nft_limit.c
@@ -76,13 +76,13 @@ static int nft_limit_init(struct nft_lim
 		return -EOVERFLOW;
 
 	if (pkts) {
-		tokens = div_u64(limit->nsecs, limit->rate) * limit->burst;
+		tokens = div64_u64(limit->nsecs, limit->rate) * limit->burst;
 	} else {
 		/* The token bucket size limits the number of tokens can be
 		 * accumulated. tokens_max specifies the bucket size.
 		 * tokens_max = unit * (rate + burst) / rate.
 		 */
-		tokens = div_u64(limit->nsecs * (limit->rate + limit->burst),
+		tokens = div64_u64(limit->nsecs * (limit->rate + limit->burst),
 				 limit->rate);
 	}
 

[PATCH 5.4 56/73] net: davicom: Fix regulator not turned off on failed probe

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

commit 31457db3750c0b0ed229d836f2609fdb8a5b790e upstream.

When the probe fails, we must disable the regulator that was previously
enabled.

This patch is a follow-up to commit ac88c531a5b3
("net: davicom: Fix regulator not turned off on failed probe") which missed
one case.

Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/davicom/dm9000.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -1476,8 +1476,10 @@ dm9000_probe(struct platform_device *pde
 
 	/* Init network device */
 	ndev = alloc_etherdev(sizeof(struct board_info));
-	if (!ndev)
-		return -ENOMEM;
+	if (!ndev) {
+		ret = -ENOMEM;
+		goto out_regulator_disable;
+	}
 
 	SET_NETDEV_DEV(ndev, &pdev->dev);
 

[PATCH 5.4 57/73] net: sit: Unregister catch-all devices

[Greg Kroah-Hartman]

From: Hristo Venev <hristo@venev.name>

commit 610f8c0fc8d46e0933955ce13af3d64484a4630a upstream.

A sit interface created without a local or a remote address is linked
into the `sit_net::tunnels_wc` list of its original namespace. When
deleting a network namespace, delete the devices that have been moved.

The following script triggers a null pointer dereference if devices
linked in a deleted `sit_net` remain:

    for i in `seq 1 30`; do
        ip netns add ns-test
        ip netns exec ns-test ip link add dev veth0 type veth peer veth1
        ip netns exec ns-test ip link add dev sit$i type sit dev veth0
        ip netns exec ns-test ip link set dev sit$i netns $$
        ip netns del ns-test
    done
    for i in `seq 1 30`; do
        ip link del dev sit$i
    done

Fixes: 5e6700b3bf98f ("sit: add support of x-netns")
Signed-off-by: Hristo Venev <hristo@venev.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/sit.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1819,9 +1819,9 @@ static void __net_exit sit_destroy_tunne
 		if (dev->rtnl_link_ops == &sit_link_ops)
 			unregister_netdevice_queue(dev, head);
 
-	for (prio = 1; prio < 4; prio++) {
+	for (prio = 0; prio < 4; prio++) {
 		int h;
-		for (h = 0; h < IP6_SIT_HASH_SIZE; h++) {
+		for (h = 0; h < (prio ? IP6_SIT_HASH_SIZE : 1); h++) {
 			struct ip_tunnel *t;
 
 			t = rtnl_dereference(sitn->tunnels[prio][h]);

[PATCH 5.4 58/73] net: ip6_tunnel: Unregister catch-all devices

[Greg Kroah-Hartman]

From: Hristo Venev <hristo@venev.name>

commit 941ea91e87a6e879ed82dad4949f6234f2702bec upstream.

Similarly to the sit case, we need to remove the tunnels with no
addresses that have been moved to another network namespace.

Fixes: 0bd8762824e73 ("ip6tnl: add x-netns support")
Signed-off-by: Hristo Venev <hristo@venev.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_tunnel.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -2217,6 +2217,16 @@ static void __net_exit ip6_tnl_destroy_t
 			t = rtnl_dereference(t->next);
 		}
 	}
+
+	t = rtnl_dereference(ip6n->tnls_wc[0]);
+	while (t) {
+		/* If dev is in the same netns, it has already
+		 * been added to the list by the previous loop.
+		 */
+		if (!net_eq(dev_net(t->dev), net))
+			unregister_netdevice_queue(t->dev, list);
+		t = rtnl_dereference(t->next);
+	}
 }
 
 static int __net_init ip6_tnl_init_net(struct net *net)

[PATCH 5.4 59/73] i40e: fix the panic when running bpf in xdpdrv mode

[Greg Kroah-Hartman]

From: Jason Xing <xingwanli@kuaishou.com>

commit 4e39a072a6a0fc422ba7da5e4336bdc295d70211 upstream.

Fix this panic by adding more rules to calculate the value of @rss_size_max
which could be used in allocating the queues when bpf is loaded, which,
however, could cause the failure and then trigger the NULL pointer of
vsi->rx_rings. Prio to this fix, the machine doesn't care about how many
cpus are online and then allocates 256 queues on the machine with 32 cpus
online actually.

Once the load of bpf begins, the log will go like this "failed to get
tracking for 256 queues for VSI 0 err -12" and this "setup of MAIN VSI
failed".

Thus, I attach the key information of the crash-log here.

BUG: unable to handle kernel NULL pointer dereference at
0000000000000000
RIP: 0010:i40e_xdp+0xdd/0x1b0 [i40e]
Call Trace:
[2160294.717292]  ? i40e_reconfig_rss_queues+0x170/0x170 [i40e]
[2160294.717666]  dev_xdp_install+0x4f/0x70
[2160294.718036]  dev_change_xdp_fd+0x11f/0x230
[2160294.718380]  ? dev_disable_lro+0xe0/0xe0
[2160294.718705]  do_setlink+0xac7/0xe70
[2160294.719035]  ? __nla_parse+0xed/0x120
[2160294.719365]  rtnl_newlink+0x73b/0x860

Fixes: 41c445ff0f48 ("i40e: main driver core")
Co-developed-by: Shujin Li <lishujin@kuaishou.com>
Signed-off-by: Shujin Li <lishujin@kuaishou.com>
Signed-off-by: Jason Xing <xingwanli@kuaishou.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -11872,6 +11872,7 @@ static int i40e_sw_init(struct i40e_pf *
 {
 	int err = 0;
 	int size;
+	u16 pow;
 
 	/* Set default capability flags */
 	pf->flags = I40E_FLAG_RX_CSUM_ENABLED |
@@ -11890,6 +11891,11 @@ static int i40e_sw_init(struct i40e_pf *
 	pf->rss_table_size = pf->hw.func_caps.rss_table_size;
 	pf->rss_size_max = min_t(int, pf->rss_size_max,
 				 pf->hw.func_caps.num_tx_qp);
+
+	/* find the next higher power-of-2 of num cpus */
+	pow = roundup_pow_of_two(num_online_cpus());
+	pf->rss_size_max = min_t(int, pf->rss_size_max, pow);
+
 	if (pf->hw.func_caps.rss) {
 		pf->flags |= I40E_FLAG_RSS_ENABLED;
 		pf->alloc_rss_size = min_t(int, pf->rss_size_max,

[PATCH 5.4 60/73] ibmvnic: avoid calling napi_disable() twice

[Greg Kroah-Hartman]

From: Lijun Pan <lijunp213@gmail.com>

commit 0775ebc4cf8554bdcd2c212669a0868ab68df5c0 upstream.

__ibmvnic_open calls napi_disable without checking whether NAPI polling
has already been disabled or not. This could cause napi_disable
being called twice, which could generate deadlock. For example,
the first napi_disable will spin until NAPI_STATE_SCHED is cleared
by napi_complete_done, then set it again.
When napi_disable is called the second time, it will loop infinitely
because no dev->poll will be running to clear NAPI_STATE_SCHED.

To prevent above scenario from happening, call ibmvnic_napi_disable()
which checks if napi is disabled or not before calling napi_disable.

Fixes: bfc32f297337 ("ibmvnic: Move resource initialization to its own routine")
Suggested-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1081,8 +1081,7 @@ static int __ibmvnic_open(struct net_dev
 
 	rc = set_link_state(adapter, IBMVNIC_LOGICAL_LNK_UP);
 	if (rc) {
-		for (i = 0; i < adapter->req_rx_queues; i++)
-			napi_disable(&adapter->napi[i]);
+		ibmvnic_napi_disable(adapter);
 		release_resources(adapter);
 		return rc;
 	}

[PATCH 5.4 61/73] ibmvnic: remove duplicate napi_schedule call in do_reset function

[Greg Kroah-Hartman]

From: Lijun Pan <lijunp213@gmail.com>

commit d3a6abccbd272aea7dc2c6f984bb5a2c11278e44 upstream.

During adapter reset, do_reset/do_hard_reset calls ibmvnic_open(),
which will calls napi_schedule if previous state is VNIC_CLOSED
(i.e, the reset case, and "ifconfig down" case). So there is no need
for do_reset to call napi_schedule again at the end of the function
though napi_schedule will neglect the request if napi is already
scheduled.

Fixes: ed651a10875f ("ibmvnic: Updated reset handling")
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1849,7 +1849,7 @@ static int do_reset(struct ibmvnic_adapt
 	u64 old_num_rx_queues, old_num_tx_queues;
 	u64 old_num_rx_slots, old_num_tx_slots;
 	struct net_device *netdev = adapter->netdev;
-	int i, rc;
+	int rc;
 
 	netdev_dbg(adapter->netdev, "Re-setting driver (%d)\n",
 		   rwi->reset_reason);
@@ -1994,10 +1994,6 @@ static int do_reset(struct ibmvnic_adapt
 	/* refresh device's multicast list */
 	ibmvnic_set_multi(netdev);
 
-	/* kick napi */
-	for (i = 0; i < adapter->req_rx_queues; i++)
-		napi_schedule(&adapter->napi[i]);
-
 	if (adapter->reset_reason == VNIC_RESET_FAILOVER ||
 	    adapter->reset_reason == VNIC_RESET_MOBILITY) {
 		call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, netdev);

[PATCH 5.4 62/73] ibmvnic: remove duplicate napi_schedule call in open function

[Greg Kroah-Hartman]

From: Lijun Pan <lijunp213@gmail.com>

commit 7c451f3ef676c805a4b77a743a01a5c21a250a73 upstream.

Remove the unnecessary napi_schedule() call in __ibmvnic_open() since
interrupt_rx() calls napi_schedule_prep/__napi_schedule during every
receive interrupt.

Fixes: ed651a10875f ("ibmvnic: Updated reset handling")
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c |    5 -----
 1 file changed, 5 deletions(-)

--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1088,11 +1088,6 @@ static int __ibmvnic_open(struct net_dev
 
 	netif_tx_start_all_queues(netdev);
 
-	if (prev_state == VNIC_CLOSED) {
-		for (i = 0; i < adapter->req_rx_queues; i++)
-			napi_schedule(&adapter->napi[i]);
-	}
-
 	adapter->state = VNIC_OPEN;
 	return rc;
 }

[PATCH 5.4 63/73] gro: ensure frag0 meets IP header alignment

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 38ec4944b593fd90c5ef42aaaa53e66ae5769d04 upstream.

After commit 0f6925b3e8da ("virtio_net: Do not pull payload in skb->head")
Guenter Roeck reported one failure in his tests using sh architecture.

After much debugging, we have been able to spot silent unaligned accesses
in inet_gro_receive()

The issue at hand is that upper networking stacks assume their header
is word-aligned. Low level drivers are supposed to reserve NET_IP_ALIGN
bytes before the Ethernet header to make that happen.

This patch hardens skb_gro_reset_offset() to not allow frag0 fast-path
if the fragment is not properly aligned.

Some arches like x86, arm64 and powerpc do not care and define NET_IP_ALIGN
as 0, this extra check will be a NOP for them.

Note that if frag0 is not used, GRO will call pskb_may_pull()
as many times as needed to pull network and transport headers.

Fixes: 0f6925b3e8da ("virtio_net: Do not pull payload in skb->head")
Fixes: 78a478d0efd9 ("gro: Inline skb_gro_header and cache frag0 virtual address")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/dev.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5406,7 +5406,8 @@ static void skb_gro_reset_offset(struct
 
 	if (skb_mac_header(skb) == skb_tail_pointer(skb) &&
 	    pinfo->nr_frags &&
-	    !PageHighMem(skb_frag_page(frag0))) {
+	    !PageHighMem(skb_frag_page(frag0)) &&
+	    (!NET_IP_ALIGN || !(skb_frag_off(frag0) & 3))) {
 		NAPI_GRO_CB(skb)->frag0 = skb_frag_address(frag0);
 		NAPI_GRO_CB(skb)->frag0_len = min_t(unsigned int,
 						    skb_frag_size(frag0),

[PATCH 5.4 64/73] ARM: footbridge: fix PCI interrupt mapping

[Greg Kroah-Hartman]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 30e3b4f256b4e366a61658c294f6a21b8626dda7 ]

Since commit 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in
pci_device_probe()"), the PCI code will call the IRQ mapping function
whenever a PCI driver is probed. If these are marked as __init, this
causes an oops if a PCI driver is loaded or bound after the kernel has
initialised.

Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-footbridge/cats-pci.c      | 4 ++--
 arch/arm/mach-footbridge/ebsa285-pci.c   | 4 ++--
 arch/arm/mach-footbridge/netwinder-pci.c | 2 +-
 arch/arm/mach-footbridge/personal-pci.c  | 5 ++---
 4 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c
index 0b2fd7e2e9b4..90b1e9be430e 100644
--- a/arch/arm/mach-footbridge/cats-pci.c
+++ b/arch/arm/mach-footbridge/cats-pci.c
@@ -15,14 +15,14 @@
 #include <asm/mach-types.h>
 
 /* cats host-specific stuff */
-static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
+static int irqmap_cats[] = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
 
 static u8 cats_no_swizzle(struct pci_dev *dev, u8 *pin)
 {
 	return 0;
 }
 
-static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (dev->irq >= 255)
 		return -1;	/* not a valid interrupt. */
diff --git a/arch/arm/mach-footbridge/ebsa285-pci.c b/arch/arm/mach-footbridge/ebsa285-pci.c
index 6f28aaa9ca79..c3f280d08fa7 100644
--- a/arch/arm/mach-footbridge/ebsa285-pci.c
+++ b/arch/arm/mach-footbridge/ebsa285-pci.c
@@ -14,9 +14,9 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
-static int irqmap_ebsa285[] __initdata = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI };
+static int irqmap_ebsa285[] = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI };
 
-static int __init ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (dev->vendor == PCI_VENDOR_ID_CONTAQ &&
 	    dev->device == PCI_DEVICE_ID_CONTAQ_82C693)
diff --git a/arch/arm/mach-footbridge/netwinder-pci.c b/arch/arm/mach-footbridge/netwinder-pci.c
index 9473aa0305e5..e8304392074b 100644
--- a/arch/arm/mach-footbridge/netwinder-pci.c
+++ b/arch/arm/mach-footbridge/netwinder-pci.c
@@ -18,7 +18,7 @@
  * We now use the slot ID instead of the device identifiers to select
  * which interrupt is routed where.
  */
-static int __init netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	switch (slot) {
 	case 0:  /* host bridge */
diff --git a/arch/arm/mach-footbridge/personal-pci.c b/arch/arm/mach-footbridge/personal-pci.c
index 4391e433a4b2..9d19aa98a663 100644
--- a/arch/arm/mach-footbridge/personal-pci.c
+++ b/arch/arm/mach-footbridge/personal-pci.c
@@ -14,13 +14,12 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
-static int irqmap_personal_server[] __initdata = {
+static int irqmap_personal_server[] = {
 	IRQ_IN0, IRQ_IN1, IRQ_IN2, IRQ_IN3, 0, 0, 0,
 	IRQ_DOORBELLHOST, IRQ_DMA1, IRQ_DMA2, IRQ_PCI
 };
 
-static int __init personal_server_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
+static int personal_server_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	unsigned char line;
 
-- 
2.30.2

[PATCH 5.4 65/73] arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems

[Greg Kroah-Hartman]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 3dd4ce4185df6798dcdcc3669bddb35899d7d5e1 ]

Commit 941432d00768 ("arm64: dts: allwinner: Drop non-removable from
SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module,
along the way with the Pine64-LTS, which share the same base .dtsi.

However while both boards indeed have a working CD GPIO on PF6, the
polarity is different: the SOPine modules uses a "push-pull" socket,
which has an active-high switch, while the Pine64-LTS use the more
traditional push-push socket and the common active-low switch.

Fix the polarity in the sopine.dtsi, and overwrite it in the LTS
board .dts, to make the SD card work again on systems using SOPine
modules.

Fixes: 941432d00768 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card")
Reported-by: Ashley <contact@victorianfox.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210316144219.5973-1-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts | 4 ++++
 arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi    | 2 +-
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
index 72d6961dc312..8d15164f2a3c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts
@@ -11,3 +11,7 @@
 	compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
 		     "allwinner,sun50i-a64";
 };
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 push-push switch */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index d935e3028fcb..19e5b7e298fd 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -57,7 +57,7 @@
 	vmmc-supply = <&reg_dcdc1>;
 	disable-wp;
 	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 push-pull switch */
 	status = "okay";
 };
 
-- 
2.30.2

[PATCH 5.4 66/73] r8169: remove fiddling with the PCIe max read request size

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 2df49d36549808a7357ad9f78b7a8e39516e7809 ]

The attempt to improve performance by changing the PCIe max read request
size was added in the vendor driver more than 10 years back and copied
to r8169 driver. In the vendor driver this has been removed long ago.
Obviously it had no effect, also in my tests I didn't see any
difference. Typically the max payload size is less than 512 bytes
anyway, and the PCI core takes care that the maximum supported value
is set. So let's remove fiddling with PCIe max read request size from
r8169 too.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/r8169_main.c | 40 +++--------------------
 1 file changed, 4 insertions(+), 36 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index bd8decc54b87..fb11561a4f17 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -742,12 +742,6 @@ static void rtl_unlock_config_regs(struct rtl8169_private *tp)
 	RTL_W8(tp, Cfg9346, Cfg9346_Unlock);
 }
 
-static void rtl_tx_performance_tweak(struct rtl8169_private *tp, u16 force)
-{
-	pcie_capability_clear_and_set_word(tp->pci_dev, PCI_EXP_DEVCTL,
-					   PCI_EXP_DEVCTL_READRQ, force);
-}
-
 static bool rtl_is_8125(struct rtl8169_private *tp)
 {
 	return tp->mac_version >= RTL_GIGA_MAC_VER_60;
@@ -4057,14 +4051,12 @@ static void r8168c_hw_jumbo_enable(struct rtl8169_private *tp)
 {
 	RTL_W8(tp, Config3, RTL_R8(tp, Config3) | Jumbo_En0);
 	RTL_W8(tp, Config4, RTL_R8(tp, Config4) | Jumbo_En1);
-	rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_512B);
 }
 
 static void r8168c_hw_jumbo_disable(struct rtl8169_private *tp)
 {
 	RTL_W8(tp, Config3, RTL_R8(tp, Config3) & ~Jumbo_En0);
 	RTL_W8(tp, Config4, RTL_R8(tp, Config4) & ~Jumbo_En1);
-	rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
 }
 
 static void r8168dp_hw_jumbo_enable(struct rtl8169_private *tp)
@@ -4082,7 +4074,6 @@ static void r8168e_hw_jumbo_enable(struct rtl8169_private *tp)
 	RTL_W8(tp, MaxTxPacketSize, 0x24);
 	RTL_W8(tp, Config3, RTL_R8(tp, Config3) | Jumbo_En0);
 	RTL_W8(tp, Config4, RTL_R8(tp, Config4) | 0x01);
-	rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_512B);
 }
 
 static void r8168e_hw_jumbo_disable(struct rtl8169_private *tp)
@@ -4090,19 +4081,18 @@ static void r8168e_hw_jumbo_disable(struct rtl8169_private *tp)
 	RTL_W8(tp, MaxTxPacketSize, 0x3f);
 	RTL_W8(tp, Config3, RTL_R8(tp, Config3) & ~Jumbo_En0);
 	RTL_W8(tp, Config4, RTL_R8(tp, Config4) & ~0x01);
-	rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
 }
 
 static void r8168b_0_hw_jumbo_enable(struct rtl8169_private *tp)
 {
-	rtl_tx_performance_tweak(tp,
-		PCI_EXP_DEVCTL_READRQ_512B | PCI_EXP_DEVCTL_NOSNOOP_EN);
+	pcie_capability_set_word(tp->pci_dev, PCI_EXP_DEVCTL,
+				 PCI_EXP_DEVCTL_NOSNOOP_EN);
 }
 
 static void r8168b_0_hw_jumbo_disable(struct rtl8169_private *tp)
 {
-	rtl_tx_performance_tweak(tp,
-		PCI_EXP_DEVCTL_READRQ_4096B | PCI_EXP_DEVCTL_NOSNOOP_EN);
+	pcie_capability_set_word(tp->pci_dev, PCI_EXP_DEVCTL,
+				 PCI_EXP_DEVCTL_NOSNOOP_EN);
 }
 
 static void r8168b_1_hw_jumbo_enable(struct rtl8169_private *tp)
@@ -4575,18 +4565,12 @@ static void rtl_hw_start_8168d(struct rtl8169_private *tp)
 	rtl_set_def_aspm_entry_latency(tp);
 
 	rtl_disable_clock_request(tp);
-
-	if (tp->dev->mtu <= ETH_DATA_LEN)
-		rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
 }
 
 static void rtl_hw_start_8168dp(struct rtl8169_private *tp)
 {
 	rtl_set_def_aspm_entry_latency(tp);
 
-	if (tp->dev->mtu <= ETH_DATA_LEN)
-		rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
-
 	rtl_disable_clock_request(tp);
 }
 
@@ -4601,8 +4585,6 @@ static void rtl_hw_start_8168d_4(struct rtl8169_private *tp)
 
 	rtl_set_def_aspm_entry_latency(tp);
 
-	rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
-
 	rtl_ephy_init(tp, e_info_8168d_4);
 
 	rtl_enable_clock_request(tp);
@@ -4677,8 +4659,6 @@ static void rtl_hw_start_8168f(struct rtl8169_private *tp)
 {
 	rtl_set_def_aspm_entry_latency(tp);
 
-	rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
-
 	rtl_eri_write(tp, 0xc0, ERIAR_MASK_0011, 0x0000);
 	rtl_eri_write(tp, 0xb8, ERIAR_MASK_0011, 0x0000);
 	rtl_set_fifo_size(tp, 0x10, 0x10, 0x02, 0x06);
@@ -4741,8 +4721,6 @@ static void rtl_hw_start_8168g(struct rtl8169_private *tp)
 
 	rtl_set_def_aspm_entry_latency(tp);
 
-	rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
-
 	rtl_reset_packet_filter(tp);
 	rtl_eri_write(tp, 0x2f8, ERIAR_MASK_0011, 0x1d8f);
 
@@ -4979,8 +4957,6 @@ static void rtl_hw_start_8168h_1(struct rtl8169_private *tp)
 
 	rtl_set_def_aspm_entry_latency(tp);
 
-	rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
-
 	rtl_reset_packet_filter(tp);
 
 	rtl_eri_set_bits(tp, 0xdc, ERIAR_MASK_1111, BIT(4));
@@ -5038,8 +5014,6 @@ static void rtl_hw_start_8168ep(struct rtl8169_private *tp)
 
 	rtl_set_def_aspm_entry_latency(tp);
 
-	rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
-
 	rtl_reset_packet_filter(tp);
 
 	rtl_eri_set_bits(tp, 0xd4, ERIAR_MASK_1111, 0x1f80);
@@ -5142,8 +5116,6 @@ static void rtl_hw_start_8102e_1(struct rtl8169_private *tp)
 
 	RTL_W8(tp, DBG_REG, FIX_NAK_1);
 
-	rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
-
 	RTL_W8(tp, Config1,
 	       LEDS1 | LEDS0 | Speed_down | MEMMAP | IOMAP | VPD | PMEnable);
 	RTL_W8(tp, Config3, RTL_R8(tp, Config3) & ~Beacon_en);
@@ -5159,8 +5131,6 @@ static void rtl_hw_start_8102e_2(struct rtl8169_private *tp)
 {
 	rtl_set_def_aspm_entry_latency(tp);
 
-	rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
-
 	RTL_W8(tp, Config1, MEMMAP | IOMAP | VPD | PMEnable);
 	RTL_W8(tp, Config3, RTL_R8(tp, Config3) & ~Beacon_en);
 }
@@ -5221,8 +5191,6 @@ static void rtl_hw_start_8402(struct rtl8169_private *tp)
 
 	rtl_ephy_init(tp, e_info_8402);
 
-	rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
-
 	rtl_set_fifo_size(tp, 0x00, 0x00, 0x02, 0x06);
 	rtl_reset_packet_filter(tp);
 	rtl_eri_write(tp, 0xc0, ERIAR_MASK_0011, 0x0000);
-- 
2.30.2

[PATCH 5.4 67/73] r8169: simplify setting PCI_EXP_DEVCTL_NOSNOOP_EN

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit e0bbe7cbb3c5ff72d680993edf89db2391e80d5d ]

r8168b_0_hw_jumbo_enable() and r8168b_0_hw_jumbo_disable() both do the
same and just set PCI_EXP_DEVCTL_NOSNOOP_EN. We can simplify the code
by moving this setting for RTL8168B to rtl_hw_start_8168().

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/r8169_main.c | 34 +++++++----------------
 1 file changed, 10 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index fb11561a4f17..5ca28985c86b 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4083,29 +4083,13 @@ static void r8168e_hw_jumbo_disable(struct rtl8169_private *tp)
 	RTL_W8(tp, Config4, RTL_R8(tp, Config4) & ~0x01);
 }
 
-static void r8168b_0_hw_jumbo_enable(struct rtl8169_private *tp)
-{
-	pcie_capability_set_word(tp->pci_dev, PCI_EXP_DEVCTL,
-				 PCI_EXP_DEVCTL_NOSNOOP_EN);
-}
-
-static void r8168b_0_hw_jumbo_disable(struct rtl8169_private *tp)
-{
-	pcie_capability_set_word(tp->pci_dev, PCI_EXP_DEVCTL,
-				 PCI_EXP_DEVCTL_NOSNOOP_EN);
-}
-
 static void r8168b_1_hw_jumbo_enable(struct rtl8169_private *tp)
 {
-	r8168b_0_hw_jumbo_enable(tp);
-
 	RTL_W8(tp, Config4, RTL_R8(tp, Config4) | (1 << 0));
 }
 
 static void r8168b_1_hw_jumbo_disable(struct rtl8169_private *tp)
 {
-	r8168b_0_hw_jumbo_disable(tp);
-
 	RTL_W8(tp, Config4, RTL_R8(tp, Config4) & ~(1 << 0));
 }
 
@@ -4113,9 +4097,6 @@ static void rtl_hw_jumbo_enable(struct rtl8169_private *tp)
 {
 	rtl_unlock_config_regs(tp);
 	switch (tp->mac_version) {
-	case RTL_GIGA_MAC_VER_11:
-		r8168b_0_hw_jumbo_enable(tp);
-		break;
 	case RTL_GIGA_MAC_VER_12:
 	case RTL_GIGA_MAC_VER_17:
 		r8168b_1_hw_jumbo_enable(tp);
@@ -4139,9 +4120,6 @@ static void rtl_hw_jumbo_disable(struct rtl8169_private *tp)
 {
 	rtl_unlock_config_regs(tp);
 	switch (tp->mac_version) {
-	case RTL_GIGA_MAC_VER_11:
-		r8168b_0_hw_jumbo_disable(tp);
-		break;
 	case RTL_GIGA_MAC_VER_12:
 	case RTL_GIGA_MAC_VER_17:
 		r8168b_1_hw_jumbo_disable(tp);
@@ -5406,10 +5384,18 @@ static void rtl_hw_start_8125(struct rtl8169_private *tp)
 
 static void rtl_hw_start_8168(struct rtl8169_private *tp)
 {
-	if (tp->mac_version == RTL_GIGA_MAC_VER_13 ||
-	    tp->mac_version == RTL_GIGA_MAC_VER_16)
+	switch (tp->mac_version) {
+	case RTL_GIGA_MAC_VER_11:
+	case RTL_GIGA_MAC_VER_12:
+	case RTL_GIGA_MAC_VER_13:
+	case RTL_GIGA_MAC_VER_16:
+	case RTL_GIGA_MAC_VER_17:
 		pcie_capability_set_word(tp->pci_dev, PCI_EXP_DEVCTL,
 					 PCI_EXP_DEVCTL_NOSNOOP_EN);
+		break;
+	default:
+		break;
+	}
 
 	if (rtl_is_8168evl_up(tp))
 		RTL_W8(tp, MaxTxPacketSize, EarlySize);
-- 
2.30.2

[PATCH 5.4 68/73] r8169: fix performance regression related to PCIe max read request size

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 21b5f672fb2eb1366dedc4ac9d32431146b378d3 ]

It turned out that on low performance systems the original change can
cause lower tx performance. On a N3450-based mini-PC tx performance
in iperf3 was reduced from 950Mbps to ~900Mbps. Therefore effectively
revert the original change, just use pcie_set_readrq() now instead of
changing the PCIe capability register directly.

Fixes: 2df49d365498 ("r8169: remove fiddling with the PCIe max read request size")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/r8169_main.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 5ca28985c86b..19ebde91555d 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4099,15 +4099,18 @@ static void rtl_hw_jumbo_enable(struct rtl8169_private *tp)
 	switch (tp->mac_version) {
 	case RTL_GIGA_MAC_VER_12:
 	case RTL_GIGA_MAC_VER_17:
+		pcie_set_readrq(tp->pci_dev, 512);
 		r8168b_1_hw_jumbo_enable(tp);
 		break;
 	case RTL_GIGA_MAC_VER_18 ... RTL_GIGA_MAC_VER_26:
+		pcie_set_readrq(tp->pci_dev, 512);
 		r8168c_hw_jumbo_enable(tp);
 		break;
 	case RTL_GIGA_MAC_VER_27 ... RTL_GIGA_MAC_VER_28:
 		r8168dp_hw_jumbo_enable(tp);
 		break;
 	case RTL_GIGA_MAC_VER_31 ... RTL_GIGA_MAC_VER_33:
+		pcie_set_readrq(tp->pci_dev, 512);
 		r8168e_hw_jumbo_enable(tp);
 		break;
 	default:
@@ -4137,6 +4140,9 @@ static void rtl_hw_jumbo_disable(struct rtl8169_private *tp)
 		break;
 	}
 	rtl_lock_config_regs(tp);
+
+	if (pci_is_pcie(tp->pci_dev) && tp->supports_gmii)
+		pcie_set_readrq(tp->pci_dev, 4096);
 }
 
 static void rtl_jumbo_config(struct rtl8169_private *tp, int mtu)
-- 
2.30.2

[PATCH 5.4 69/73] r8169: improve rtl_jumbo_config

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 9db0ac57bd3286fedcf43a86b29b847cea281cc7 ]

Merge enabling and disabling jumbo packets to one function to make
the code a little simpler.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/r8169_main.c | 69 +++++++++--------------
 1 file changed, 27 insertions(+), 42 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 19ebde91555d..1352dd0b69e9 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4093,66 +4093,52 @@ static void r8168b_1_hw_jumbo_disable(struct rtl8169_private *tp)
 	RTL_W8(tp, Config4, RTL_R8(tp, Config4) & ~(1 << 0));
 }
 
-static void rtl_hw_jumbo_enable(struct rtl8169_private *tp)
+static void rtl_jumbo_config(struct rtl8169_private *tp)
 {
-	rtl_unlock_config_regs(tp);
-	switch (tp->mac_version) {
-	case RTL_GIGA_MAC_VER_12:
-	case RTL_GIGA_MAC_VER_17:
-		pcie_set_readrq(tp->pci_dev, 512);
-		r8168b_1_hw_jumbo_enable(tp);
-		break;
-	case RTL_GIGA_MAC_VER_18 ... RTL_GIGA_MAC_VER_26:
-		pcie_set_readrq(tp->pci_dev, 512);
-		r8168c_hw_jumbo_enable(tp);
-		break;
-	case RTL_GIGA_MAC_VER_27 ... RTL_GIGA_MAC_VER_28:
-		r8168dp_hw_jumbo_enable(tp);
-		break;
-	case RTL_GIGA_MAC_VER_31 ... RTL_GIGA_MAC_VER_33:
-		pcie_set_readrq(tp->pci_dev, 512);
-		r8168e_hw_jumbo_enable(tp);
-		break;
-	default:
-		break;
-	}
-	rtl_lock_config_regs(tp);
-}
+	bool jumbo = tp->dev->mtu > ETH_DATA_LEN;
 
-static void rtl_hw_jumbo_disable(struct rtl8169_private *tp)
-{
 	rtl_unlock_config_regs(tp);
 	switch (tp->mac_version) {
 	case RTL_GIGA_MAC_VER_12:
 	case RTL_GIGA_MAC_VER_17:
-		r8168b_1_hw_jumbo_disable(tp);
+		if (jumbo) {
+			pcie_set_readrq(tp->pci_dev, 512);
+			r8168b_1_hw_jumbo_enable(tp);
+		} else {
+			r8168b_1_hw_jumbo_disable(tp);
+		}
 		break;
 	case RTL_GIGA_MAC_VER_18 ... RTL_GIGA_MAC_VER_26:
-		r8168c_hw_jumbo_disable(tp);
+		if (jumbo) {
+			pcie_set_readrq(tp->pci_dev, 512);
+			r8168c_hw_jumbo_enable(tp);
+		} else {
+			r8168c_hw_jumbo_disable(tp);
+		}
 		break;
 	case RTL_GIGA_MAC_VER_27 ... RTL_GIGA_MAC_VER_28:
-		r8168dp_hw_jumbo_disable(tp);
+		if (jumbo)
+			r8168dp_hw_jumbo_enable(tp);
+		else
+			r8168dp_hw_jumbo_disable(tp);
 		break;
 	case RTL_GIGA_MAC_VER_31 ... RTL_GIGA_MAC_VER_33:
-		r8168e_hw_jumbo_disable(tp);
+		if (jumbo) {
+			pcie_set_readrq(tp->pci_dev, 512);
+			r8168e_hw_jumbo_enable(tp);
+		} else {
+			r8168e_hw_jumbo_disable(tp);
+		}
 		break;
 	default:
 		break;
 	}
 	rtl_lock_config_regs(tp);
 
-	if (pci_is_pcie(tp->pci_dev) && tp->supports_gmii)
+	if (!jumbo && pci_is_pcie(tp->pci_dev) && tp->supports_gmii)
 		pcie_set_readrq(tp->pci_dev, 4096);
 }
 
-static void rtl_jumbo_config(struct rtl8169_private *tp, int mtu)
-{
-	if (mtu > ETH_DATA_LEN)
-		rtl_hw_jumbo_enable(tp);
-	else
-		rtl_hw_jumbo_disable(tp);
-}
-
 DECLARE_RTL_COND(rtl_chipcmd_cond)
 {
 	return RTL_R8(tp, ChipCmd) & CmdReset;
@@ -5458,7 +5444,7 @@ static void rtl_hw_start(struct  rtl8169_private *tp)
 	rtl_set_rx_tx_desc_registers(tp);
 	rtl_lock_config_regs(tp);
 
-	rtl_jumbo_config(tp, tp->dev->mtu);
+	rtl_jumbo_config(tp);
 
 	/* Initially a 10 us delay. Turned it into a PCI commit. - FR */
 	RTL_R16(tp, CPlusCmd);
@@ -5473,10 +5459,9 @@ static int rtl8169_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
 
-	rtl_jumbo_config(tp, new_mtu);
-
 	dev->mtu = new_mtu;
 	netdev_update_features(dev);
+	rtl_jumbo_config(tp);
 
 	/* Reportedly at least Asus X453MA truncates packets otherwise */
 	if (tp->mac_version == RTL_GIGA_MAC_VER_37)
-- 
2.30.2

[PATCH 5.4 70/73] r8169: tweak max read request size for newer chips also in jumbo mtu mode

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 5e00e16cb98935bcf06f51931876d898c226f65c ]

So far we don't increase the max read request size if we switch to
jumbo mode before bringing up the interface for the first time.
Let's change this.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/r8169_main.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 1352dd0b69e9..4e4953b1433a 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4096,13 +4096,14 @@ static void r8168b_1_hw_jumbo_disable(struct rtl8169_private *tp)
 static void rtl_jumbo_config(struct rtl8169_private *tp)
 {
 	bool jumbo = tp->dev->mtu > ETH_DATA_LEN;
+	int readrq = 4096;
 
 	rtl_unlock_config_regs(tp);
 	switch (tp->mac_version) {
 	case RTL_GIGA_MAC_VER_12:
 	case RTL_GIGA_MAC_VER_17:
 		if (jumbo) {
-			pcie_set_readrq(tp->pci_dev, 512);
+			readrq = 512;
 			r8168b_1_hw_jumbo_enable(tp);
 		} else {
 			r8168b_1_hw_jumbo_disable(tp);
@@ -4110,7 +4111,7 @@ static void rtl_jumbo_config(struct rtl8169_private *tp)
 		break;
 	case RTL_GIGA_MAC_VER_18 ... RTL_GIGA_MAC_VER_26:
 		if (jumbo) {
-			pcie_set_readrq(tp->pci_dev, 512);
+			readrq = 512;
 			r8168c_hw_jumbo_enable(tp);
 		} else {
 			r8168c_hw_jumbo_disable(tp);
@@ -4135,8 +4136,8 @@ static void rtl_jumbo_config(struct rtl8169_private *tp)
 	}
 	rtl_lock_config_regs(tp);
 
-	if (!jumbo && pci_is_pcie(tp->pci_dev) && tp->supports_gmii)
-		pcie_set_readrq(tp->pci_dev, 4096);
+	if (pci_is_pcie(tp->pci_dev) && tp->supports_gmii)
+		pcie_set_readrq(tp->pci_dev, readrq);
 }
 
 DECLARE_RTL_COND(rtl_chipcmd_cond)
-- 
2.30.2

[PATCH 5.4 71/73] r8169: dont advertise pause in jumbo mode

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 453a77894efa4d9b6ef9644d74b9419c47ac427c ]

It has been reported [0] that using pause frames in jumbo mode impacts
performance. There's no available chip documentation, but vendor
drivers r8168 and r8125 don't advertise pause in jumbo mode. So let's
do the same, according to Roman it fixes the issue.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=212617

Fixes: 9cf9b84cc701 ("r8169: make use of phy_set_asym_pause")
Reported-by: Roman Mamedov <rm+bko@romanrm.net>
Tested-by: Roman Mamedov <rm+bko@romanrm.net>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/r8169_main.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 4e4953b1433a..8ff178fc2670 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4138,6 +4138,13 @@ static void rtl_jumbo_config(struct rtl8169_private *tp)
 
 	if (pci_is_pcie(tp->pci_dev) && tp->supports_gmii)
 		pcie_set_readrq(tp->pci_dev, readrq);
+
+	/* Chip doesn't support pause in jumbo mode */
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+			 tp->phydev->advertising, !jumbo);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+			 tp->phydev->advertising, !jumbo);
+	phy_start_aneg(tp->phydev);
 }
 
 DECLARE_RTL_COND(rtl_chipcmd_cond)
@@ -6314,8 +6321,6 @@ static int r8169_phy_connect(struct rtl8169_private *tp)
 	if (!tp->supports_gmii)
 		phy_set_max_speed(phydev, SPEED_100);
 
-	phy_support_asym_pause(phydev);
-
 	phy_attached_info(phydev);
 
 	return 0;
-- 
2.30.2

[PATCH 5.4 72/73] ARM: 9071/1: uprobes: Dont hook on thumb instructions

[Greg Kroah-Hartman]

From: Fredrik Strupe <fredrik@strupe.net>

commit d2f7eca60b29006285d57c7035539e33300e89e5 upstream.

Since uprobes is not supported for thumb, check that the thumb bit is
not set when matching the uprobes instruction hooks.

The Arm UDF instructions used for uprobes triggering
(UPROBE_SWBP_ARM_INSN and UPROBE_SS_ARM_INSN) coincidentally share the
same encoding as a pair of unallocated 32-bit thumb instructions (not
UDF) when the condition code is 0b1111 (0xf). This in effect makes it
possible to trigger the uprobes functionality from thumb, and at that
using two unallocated instructions which are not permanently undefined.

Signed-off-by: Fredrik Strupe <fredrik@strupe.net>
Cc: stable@vger.kernel.org
Fixes: c7edc9e326d5 ("ARM: add uprobes support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/probes/uprobes/core.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/probes/uprobes/core.c
+++ b/arch/arm/probes/uprobes/core.c
@@ -204,7 +204,7 @@ unsigned long uprobe_get_swbp_addr(struc
 static struct undef_hook uprobes_arm_break_hook = {
 	.instr_mask	= 0x0fffffff,
 	.instr_val	= (UPROBE_SWBP_ARM_INSN & 0x0fffffff),
-	.cpsr_mask	= MODE_MASK,
+	.cpsr_mask	= (PSR_T_BIT | MODE_MASK),
 	.cpsr_val	= USR_MODE,
 	.fn		= uprobe_trap_handler,
 };
@@ -212,7 +212,7 @@ static struct undef_hook uprobes_arm_bre
 static struct undef_hook uprobes_arm_ss_hook = {
 	.instr_mask	= 0x0fffffff,
 	.instr_val	= (UPROBE_SS_ARM_INSN & 0x0fffffff),
-	.cpsr_mask	= MODE_MASK,
+	.cpsr_mask	= (PSR_T_BIT | MODE_MASK),
 	.cpsr_val	= USR_MODE,
 	.fn		= uprobe_trap_handler,
 };

[PATCH 5.4 73/73] net: phy: marvell: fix detection of PHY on Topaz switches

[Greg Kroah-Hartman]

From: Pali Rohár <pali@kernel.org>

commit 1fe976d308acb6374c899a4ee8025a0a016e453e upstream.

Since commit fee2d546414d ("net: phy: marvell: mv88e6390 temperature
sensor reading"), Linux reports the temperature of Topaz hwmon as
constant -75°C.

This is because switches from the Topaz family (88E6141 / 88E6341) have
the address of the temperature sensor register different from Peridot.

This address is instead compatible with 88E1510 PHYs, as was used for
Topaz before the above mentioned commit.

Create a new mapping table between switch family and PHY ID for families
which don't have a model number. And define PHY IDs for Topaz and Peridot
families.

Create a new PHY ID and a new PHY driver for Topaz's internal PHY.
The only difference from Peridot's PHY driver is the HWMON probing
method.

Prior this change Topaz's internal PHY is detected by kernel as:

  PHY [...] driver [Marvell 88E6390] (irq=63)

And afterwards as:

  PHY [...] driver [Marvell 88E6341 Family] (irq=63)

Signed-off-by: Pali Rohár <pali@kernel.org>
BugLink: https://github.com/globalscaletechnologies/linux/issues/1
Fixes: fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading")
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c |   30 +++++++++++++-----------------
 drivers/net/phy/marvell.c        |   29 ++++++++++++++++++++++++++---
 include/linux/marvell_phy.h      |    5 +++--
 3 files changed, 42 insertions(+), 22 deletions(-)

--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2766,10 +2766,17 @@ unlock:
 	return err;
 }
 
+/* prod_id for switch families which do not have a PHY model number */
+static const u16 family_prod_id_table[] = {
+	[MV88E6XXX_FAMILY_6341] = MV88E6XXX_PORT_SWITCH_ID_PROD_6341,
+	[MV88E6XXX_FAMILY_6390] = MV88E6XXX_PORT_SWITCH_ID_PROD_6390,
+};
+
 static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg)
 {
 	struct mv88e6xxx_mdio_bus *mdio_bus = bus->priv;
 	struct mv88e6xxx_chip *chip = mdio_bus->chip;
+	u16 prod_id;
 	u16 val;
 	int err;
 
@@ -2780,23 +2787,12 @@ static int mv88e6xxx_mdio_read(struct mi
 	err = chip->info->ops->phy_read(chip, bus, phy, reg, &val);
 	mv88e6xxx_reg_unlock(chip);
 
-	if (reg == MII_PHYSID2) {
-		/* Some internal PHYs don't have a model number. */
-		if (chip->info->family != MV88E6XXX_FAMILY_6165)
-			/* Then there is the 6165 family. It gets is
-			 * PHYs correct. But it can also have two
-			 * SERDES interfaces in the PHY address
-			 * space. And these don't have a model
-			 * number. But they are not PHYs, so we don't
-			 * want to give them something a PHY driver
-			 * will recognise.
-			 *
-			 * Use the mv88e6390 family model number
-			 * instead, for anything which really could be
-			 * a PHY,
-			 */
-			if (!(val & 0x3f0))
-				val |= MV88E6XXX_PORT_SWITCH_ID_PROD_6390 >> 4;
+	/* Some internal PHYs don't have a model number. */
+	if (reg == MII_PHYSID2 && !(val & 0x3f0) &&
+	    chip->info->family < ARRAY_SIZE(family_prod_id_table)) {
+		prod_id = family_prod_id_table[chip->info->family];
+		if (prod_id)
+			val |= prod_id >> 4;
 	}
 
 	return err ? err : val;
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -2401,9 +2401,31 @@ static struct phy_driver marvell_drivers
 		.get_stats = marvell_get_stats,
 	},
 	{
-		.phy_id = MARVELL_PHY_ID_88E6390,
+		.phy_id = MARVELL_PHY_ID_88E6341_FAMILY,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
-		.name = "Marvell 88E6390",
+		.name = "Marvell 88E6341 Family",
+		/* PHY_GBIT_FEATURES */
+		.probe = m88e1510_probe,
+		.config_init = &marvell_config_init,
+		.config_aneg = &m88e6390_config_aneg,
+		.read_status = &marvell_read_status,
+		.ack_interrupt = &marvell_ack_interrupt,
+		.config_intr = &marvell_config_intr,
+		.did_interrupt = &m88e1121_did_interrupt,
+		.resume = &genphy_resume,
+		.suspend = &genphy_suspend,
+		.read_page = marvell_read_page,
+		.write_page = marvell_write_page,
+		.get_sset_count = marvell_get_sset_count,
+		.get_strings = marvell_get_strings,
+		.get_stats = marvell_get_stats,
+		.get_tunable = m88e1540_get_tunable,
+		.set_tunable = m88e1540_set_tunable,
+	},
+	{
+		.phy_id = MARVELL_PHY_ID_88E6390_FAMILY,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
+		.name = "Marvell 88E6390 Family",
 		/* PHY_GBIT_FEATURES */
 		.probe = m88e6390_probe,
 		.config_init = &marvell_config_init,
@@ -2441,7 +2463,8 @@ static struct mdio_device_id __maybe_unu
 	{ MARVELL_PHY_ID_88E1540, MARVELL_PHY_ID_MASK },
 	{ MARVELL_PHY_ID_88E1545, MARVELL_PHY_ID_MASK },
 	{ MARVELL_PHY_ID_88E3016, MARVELL_PHY_ID_MASK },
-	{ MARVELL_PHY_ID_88E6390, MARVELL_PHY_ID_MASK },
+	{ MARVELL_PHY_ID_88E6341_FAMILY, MARVELL_PHY_ID_MASK },
+	{ MARVELL_PHY_ID_88E6390_FAMILY, MARVELL_PHY_ID_MASK },
 	{ }
 };
 
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -23,11 +23,12 @@
 #define MARVELL_PHY_ID_88X3310		0x002b09a0
 #define MARVELL_PHY_ID_88E2110		0x002b09b0
 
-/* The MV88e6390 Ethernet switch contains embedded PHYs. These PHYs do
+/* These Ethernet switch families contain embedded PHYs, but they do
  * not have a model ID. So the switch driver traps reads to the ID2
  * register and returns the switch family ID
  */
-#define MARVELL_PHY_ID_88E6390		0x01410f90
+#define MARVELL_PHY_ID_88E6341_FAMILY	0x01410f41
+#define MARVELL_PHY_ID_88E6390_FAMILY	0x01410f90
 
 #define MARVELL_PHY_FAMILY_ID(id)	((id) >> 4)
 

Re: [PATCH 5.4 00/73] 5.4.114-rc1 review

[Florian Fainelli]

On 4/19/2021 6:05 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.114 release.
> There are 73 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 21 Apr 2021 13:05:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.114-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h


On ARCH_BRCMSTB, using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.4 00/73] 5.4.114-rc1 review

[Shuah Khan]

On 4/19/21 7:05 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.114 release.
> There are 73 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 21 Apr 2021 13:05:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.114-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.4 00/73] 5.4.114-rc1 review

[Guenter Roeck]

On Mon, Apr 19, 2021 at 03:05:51PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.114 release.
> There are 73 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 21 Apr 2021 13:05:09 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 433 pass: 433 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.4 00/73] 5.4.114-rc1 review

[Naresh Kamboju]

On Mon, 19 Apr 2021 at 18:50, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.114 release.
> There are 73 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 21 Apr 2021 13:05:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.114-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

NOTE:

The following kernel crash reported on arm64 hikey device running stable-rc
5.4.114-rc1 kernel and testing LTP thp04 test case.
but not reproducible. please find more details in the below link,
So this is not considered as real regression.

thp04: page allocation failure: order:0,
mode:0x400dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO), nodemask=(null)
Unable to handle kernel paging request at virtual address 0000000000001540
,cpuset=/,mems_allowed=0
Unable to handle kernel paging request at virtual address 0000000000001540

https://lore.kernel.org/stable/CA+G9fYtujdEqdGE_3dDpAecLMAmUfwZEm5EmPEGTNdLQgXtYYw@mail.gmail.com/T/#u

## Build
* kernel: 5.4.114-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.4.y
* git commit: c509b45704fd663fc59405e98d29d7f06eaae4b5
* git describe: v5.4.113-74-gc509b45704fd
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.113-74-gc509b45704fd

## No regressions (compared to v5.4.113-49-g56028094045b)

## No fixes (compared to v5.4.113-49-g56028094045b)

## Test result summary
 total: 64147, pass: 53600, fail: 638, skip: 9689, xfail: 220,

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 191 total, 191 passed, 0 failed
* arm64: 25 total, 25 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 14 total, 14 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 21 total, 21 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 25 total, 25 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 00/73] 5.4.114-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, Apr 19, 2021 at 03:05:51PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.114 release.
> There are 73 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 21 Apr 2021 13:05:09 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 10.3.1 20210416): 65 configs -> no new failure
arm (gcc version 10.3.1 20210416): 107 configs -> no new failure
x86_64 (gcc version 10.2.1 20210110): 2 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression.
arm: Booted on rpi3b. No regression.

Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 5.4 00/73] 5.4.114-rc1 review

[Samuel Zou]

On 2021/4/19 21:05, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.114 release.
> There are 73 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 21 Apr 2021 13:05:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.114-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 5.4.114-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.114-rc1
Commit: c509b45704fd663fc59405e98d29d7f06eaae4b5
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 5764
passed: 5764
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 5764
passed: 5764
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>