linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michal Hocko <mhocko@suse.com>
To: Oscar Salvador <osalvador@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	David Hildenbrand <david@redhat.com>,
	Anshuman Khandual <anshuman.khandual@arm.com>,
	Vlastimil Babka <vbabka@suse.cz>,
	Pavel Tatashin <pasha.tatashin@soleen.com>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v10 4/8] mm,memory_hotplug: Allocate memmap from the added memory range
Date: Wed, 21 Apr 2021 13:37:22 +0200	[thread overview]
Message-ID: <YIAOcrolk359gnOC@dhcp22.suse.cz> (raw)
In-Reply-To: <20210421102701.25051-5-osalvador@suse.de>

On Wed 21-04-21 12:26:57, Oscar Salvador wrote:
> Physical memory hotadd has to allocate a memmap (struct page array) for
> the newly added memory section. Currently, alloc_pages_node() is used
> for those allocations.
> 
> This has some disadvantages:
>  a) an existing memory is consumed for that purpose
>     (eg: ~2MB per 128MB memory section on x86_64)
>     This can even lead to extreme cases where system goes OOM because
>     the physically hotplugged memory depletes the available memory before
>     it is onlined.
>  b) if the whole node is movable then we have off-node struct pages
>     which has performance drawbacks.
>  c) It might be there are no PMD_ALIGNED chunks so memmap array gets
>     populated with base pages.
> 
> This can be improved when CONFIG_SPARSEMEM_VMEMMAP is enabled.
> 
> Vmemap page tables can map arbitrary memory. That means that we can
> reserve a part of the physically hotadded memory to back vmemmap page
> tables. This implementation uses the beginning of the hotplugged memory
> for that purpose.
> 
> There are some non-obviously things to consider though.  Vmemmap
> pages are allocated/freed during the memory hotplug events
> (add_memory_resource(), try_remove_memory()) when the memory is
> added/removed. This means that the reserved physical range is not online
> although it is used. The most obvious side effect is that pfn_to_online_page()
> returns NULL for those pfns. The current design expects that this
> should be OK as the hotplugged memory is considered a garbage until it
> is onlined. For example hibernation wouldn't save the content of those
> vmmemmaps into the image so it wouldn't be restored on resume but this
> should be OK as there no real content to recover anyway while metadata
> is reachable from other data structures (e.g. vmemmap page tables).
> 
> The reserved space is therefore (de)initialized during the {on,off}line
> events (mhp_{de}init_memmap_on_memory). That is done by extracting page
> allocator independent initialization from the regular onlining path.
> The primary reason to handle the reserved space outside of {on,off}line_pages
> is to make each initialization specific to the purpose rather than
> special case them in a single function.
> 
> As per above, the functions that are introduced are:
> 
>  - mhp_init_memmap_on_memory:
> 		       Initializes vmemmap pages by calling move_pfn_range_to_zone(),
> 		       calls kasan_add_zero_shadow(), and onlines as many sections
> 		       as vmemmap pages fully span.
>  - mhp_deinit_memmap_on_memory:
> 		       Offlines as many sections as vmemmap pages fully span,
> 		       removes the range from zhe zone by remove_pfn_range_from_zone(),
> 		       and calls kasan_remove_zero_shadow() for the range.
> 
> The new function memory_block_online() calls mhp_init_memmap_on_memory() before
> doing the actual online_pages(). Should online_pages() fail, we clean up
> by calling mhp_deinit_memmap_on_memory().
> Adjusting of present_pages is done at the end once we know that online_pages()
> succedeed.
> 
> On offline, memory_block_offline() needs to unaccount vmemmap pages from
> present_pages() before calling offline_pages().
> This is necessary because offline_pages() tears down some structures based
> on the fact whether the node or the zone become empty.
> If offline_pages() fails, we account back vmemmap pages.
> If it succeeds, we call mhp_deinit_memmap_on_memory().
> 
> Hot-remove:
> 
>  We need to be careful when removing memory, as adding and
>  removing memory needs to be done with the same granularity.
>  To check that this assumption is not violated, we check the
>  memory range we want to remove and if a) any memory block has
>  vmemmap pages and b) the range spans more than a single memory
>  block, we scream out loud and refuse to proceed.
> 
>  If all is good and the range was using memmap on memory (aka vmemmap pages),
>  we construct an altmap structure so free_hugepage_table does the right
>  thing and calls vmem_altmap_free instead of free_pagetable.
> 
> Signed-off-by: Oscar Salvador <osalvador@suse.de>
> Reviewed-by: David Hildenbrand <david@redhat.com>

Thanks for updating the changelog.

Acked-by: Michal Hocko <mhocko@suse.com>

[...]
> @@ -648,9 +650,16 @@ static void online_pages_range(unsigned long start_pfn, unsigned long nr_pages)
>  	 * decide to not expose all pages to the buddy (e.g., expose them
>  	 * later). We account all pages as being online and belonging to this
>  	 * zone ("present").
> +	 * When using memmap_on_memory, the range might not be aligned to
> +	 * MAX_ORDER_NR_PAGES - 1, but pageblock aligned. __ffs() will detect
> +	 * this and the first chunk to online will be pageblock_nr_pages.
>  	 */
> -	for (pfn = start_pfn; pfn < end_pfn; pfn += MAX_ORDER_NR_PAGES)
> -		(*online_page_callback)(pfn_to_page(pfn), MAX_ORDER - 1);
> +	for (pfn = start_pfn; pfn < end_pfn;) {
> +		int order = min(MAX_ORDER - 1UL, __ffs(pfn));
> +
> +		(*online_page_callback)(pfn_to_page(pfn), order);
> +		pfn += (1UL << order);
> +	}
>  
>  	/* mark all involved sections as online */
>  	online_mem_sections(start_pfn, end_pfn);

You have dropped the check for the overflow beyond end_pfn and this made
me think whether that is safe in general. It took me a while to realize
that end_pfn is always going to be within MAX_ORDER - 1 due to section
constrains (hopefully no surprises on some arches). Early init code is
in a much more complicated situation because the early memory maps can
have many oddities.

... just thinking out loud in case I need too to look that up again in
future...
-- 
Michal Hocko
SUSE Labs

  reply	other threads:[~2021-04-21 11:37 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-21 10:26 [PATCH v10 0/8] Allocate memmap from hotadded memory (per device) Oscar Salvador
2021-04-21 10:26 ` [PATCH v10 1/8] drivers/base/memory: Introduce memory_block_{online,offline} Oscar Salvador
2021-04-21 10:26 ` [PATCH v10 2/8] mm,memory_hotplug: Relax fully spanned sections check Oscar Salvador
2021-04-21 10:26 ` [PATCH v10 3/8] mm,memory_hotplug: Factor out adjusting present pages into adjust_present_page_count() Oscar Salvador
2021-04-21 10:26 ` [PATCH v10 4/8] mm,memory_hotplug: Allocate memmap from the added memory range Oscar Salvador
2021-04-21 11:37   ` Michal Hocko [this message]
2021-04-21 10:26 ` [PATCH v10 5/8] acpi,memhotplug: Enable MHP_MEMMAP_ON_MEMORY when supported Oscar Salvador
2021-04-21 10:26 ` [PATCH v10 6/8] mm,memory_hotplug: Add kernel boot option to enable memmap_on_memory Oscar Salvador
2021-04-21 10:27 ` [PATCH v10 7/8] x86/Kconfig: Introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE Oscar Salvador
2021-04-21 10:27 ` [PATCH v10 8/8] arm64/Kconfig: " Oscar Salvador

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YIAOcrolk359gnOC@dhcp22.suse.cz \
    --to=mhocko@suse.com \
    --cc=akpm@linux-foundation.org \
    --cc=anshuman.khandual@arm.com \
    --cc=david@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=osalvador@suse.de \
    --cc=pasha.tatashin@soleen.com \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).