* [GIT PULL] USB-serial updates for 5.13-rc1
@ 2021-04-22 8:49 Johan Hovold
2021-04-22 9:20 ` Greg Kroah-Hartman
0 siblings, 1 reply; 2+ messages in thread
From: Johan Hovold @ 2021-04-22 8:49 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-usb, linux-kernel
The following changes since commit 1e28eed17697bcf343c6743f0028cc3b5dd88bf0:
Linux 5.12-rc3 (2021-03-14 14:41:02 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial.git usb-serial-5.13-rc1
for you to fetch changes up to 039b81d50a4822edfc07a7c2e6963823e993b2f0:
USB: cdc-acm: add more Maxlinear/Exar models to ignore list (2021-04-13 18:37:22 +0200)
----------------------------------------------------------------
USB-serial updates for 5.13-rc1
Here are the USB-serial updates for 5.13-rc1, including:
- better type detection for pl2303
- support for more line speeds for pl2303 (TA/TB)
- fixed CSIZE handling for the new xr driver
- core support for multi-interface functions
- TIOCGSERIAL and TIOCSSERIAL fixes
- generic TIOCSSERIAL support (e.g. for closing_wait)
- fixed return value for unsupported ioctls
- support for gpio valid masks in cp210x
- drain-delay fixes and improvements
- support for multi-port devices for xr
- generalisation of the xr driver to support three new device classes
(XR21B142X, XR21B1411 and XR2280X)
Included are also various clean ups.
All have been in linux-next with no reported issues.
----------------------------------------------------------------
Colin Ian King (1):
USB: serial: iuu_phoenix: remove redundant variable 'error'
Jiri Slaby (2):
USB: serial: keyspan: drop unneeded forward declarations
USB: serial: io_edgeport: drop unneeded forward declarations
Johan Hovold (67):
USB: serial: pl2303: clean up type detection
USB: serial: pl2303: amend and tighten type detection
USB: serial: pl2303: rename legacy PL2303H type
USB: serial: pl2303: tighten type HXN (G) detection
USB: serial: pl2303: add device-type names
USB: serial: xr: fix CSIZE handling
USB: serial: drop unused suspending flag
USB: serial: refactor endpoint classification
USB: serial: add support for multi-interface functions
USB: serial: xr: claim both interfaces
USB: serial: ark3116: fix TIOCGSERIAL implementation
USB: serial: f81232: fix TIOCGSERIAL implementation
USB: serial: f81534: fix TIOCGSERIAL implementation
USB: serial: ftdi_sio: fix TIOCGSERIAL implementation
USB: serial: io_edgeport: fix TIOCGSERIAL implementation
USB: serial: io_ti: fix TIOCGSERIAL implementation
USB: serial: mos7720: fix TIOCGSERIAL implementation
USB: serial: mos7840: fix TIOCGSERIAL implementation
USB: serial: opticon: fix TIOCGSERIAL implementation
USB: serial: pl2303: fix TIOCGSERIAL implementation
USB: serial: quatech2: fix TIOCGSERIAL implementation
USB: serial: ssu100: fix TIOCGSERIAL implementation
USB: serial: ti_usb_3410_5052: fix TIOCGSERIAL implementation
USB: serial: ti_usb_3410_5052: fix TIOCSSERIAL permission check
USB: serial: usb_wwan: fix TIOCSSERIAL jiffies conversions
USB: serial: usb_wwan: fix unprivileged TIOCCSERIAL
USB: serial: usb_wwan: fix TIOCGSERIAL implementation
USB: serial: whiteheat: fix TIOCGSERIAL implementation
USB: serial: fix return value for unsupported ioctls
USB: serial: add generic support for TIOCSSERIAL
USB: serial: stop reporting legacy UART types
USB: serial: ftdi_sio: ignore baud_base changes
USB: serial: ftdi_sio: simplify TIOCGSERIAL permission check
USB: serial: ftdi_sio: clean up TIOCSSERIAL
USB: serial: io_ti: drop closing_wait module parameter
USB: serial: io_ti: switch to 30-second closing wait
USB: serial: ti_usb_3410_5052: drop closing_wait module parameter
USB: serial: ti_usb_3410_5052: switch to 30-second closing wait
USB: serial: io_edgeport: drop unused definitions
USB: serial: do not use tty class device for debugging
USB: serial: cp210x: provide gpio valid mask
USB: serial: cp210x: add gpio-configuration debug printk
USB: serial: f81232: drop time-based drain delay
USB: serial: io_ti: document reason for drain delay
USB: serial: ti_usb_3410_5052: reduce drain delay to one char
USB: serial: ti_usb_3410_5052: drop drain delay for 3410
USB: serial: io_ti: clean up vendor-request helpers
USB: serial: io_ti: add send-port-command helper
USB: serial: io_ti: add read-port-command helper
USB: serial: io_ti: use kernel types consistently
USB: serial: io_ti: drop unnecessary packed attributes
USB: serial: ti_usb_3410_5052: drop unnecessary packed attributes
USB: serial: ti_usb_3410_5052: clean up vendor-request helpers
USB: serial: ti_usb_3410_5052: add port-command helpers
USB: serial: ti_usb_3410_5052: use kernel types consistently
USB: serial: ti_usb_3410_5052: clean up termios CSIZE handling
USB: serial: xr: add support for XR21V1412 and XR21V1414
USB: serial: xr: rename GPIO-mode defines
USB: serial: xr: rename GPIO-pin defines
USB: serial: xr: move pin configuration to probe
USB: serial: xr: drop type prefix from shared defines
USB: serial: xr: add type abstraction
USB: serial: xr: add support for XR21B1421, XR21B1422 and XR21B1424
USB: serial: xr: add support for XR21B1411
USB: serial: xr: add support for XR22801, XR22802, XR22804
USB: serial: xr: reset FIFOs on open
USB: serial: xr: add copyright notice
Mauro Carvalho Chehab (1):
USB: cdc-acm: add more Maxlinear/Exar models to ignore list
Michael G. Katzmann (1):
USB: serial: pl2303: TA & TB alternate divider with non-standard baud rates
drivers/usb/class/cdc-acm.c | 14 +-
drivers/usb/serial/ark3116.c | 13 -
drivers/usb/serial/cp210x.c | 31 +-
drivers/usb/serial/f81232.c | 12 +-
drivers/usb/serial/f81534.c | 7 +-
drivers/usb/serial/ftdi_sio.c | 35 +-
drivers/usb/serial/io_edgeport.c | 67 +--
drivers/usb/serial/io_edgeport.h | 68 ---
drivers/usb/serial/io_ti.c | 210 ++++------
drivers/usb/serial/io_ti.h | 38 +-
drivers/usb/serial/iuu_phoenix.c | 4 +-
drivers/usb/serial/keyspan.c | 20 -
drivers/usb/serial/metro-usb.c | 4 +-
drivers/usb/serial/mos7720.c | 18 -
drivers/usb/serial/mos7840.c | 23 --
drivers/usb/serial/opticon.c | 18 -
drivers/usb/serial/option.c | 2 -
drivers/usb/serial/pl2303.c | 188 ++++++---
drivers/usb/serial/quatech2.c | 16 -
drivers/usb/serial/ssu100.c | 16 -
drivers/usb/serial/ti_usb_3410_5052.c | 213 ++++------
drivers/usb/serial/upd78f0730.c | 7 +-
drivers/usb/serial/usb-serial.c | 226 +++++++---
drivers/usb/serial/usb-wwan.h | 4 -
drivers/usb/serial/usb_wwan.c | 45 --
drivers/usb/serial/whiteheat.c | 17 +-
drivers/usb/serial/xr_serial.c | 754 +++++++++++++++++++++++++++-------
include/linux/usb/serial.h | 10 +-
28 files changed, 1158 insertions(+), 922 deletions(-)
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] USB-serial updates for 5.13-rc1
2021-04-22 8:49 [GIT PULL] USB-serial updates for 5.13-rc1 Johan Hovold
@ 2021-04-22 9:20 ` Greg Kroah-Hartman
0 siblings, 0 replies; 2+ messages in thread
From: Greg Kroah-Hartman @ 2021-04-22 9:20 UTC (permalink / raw)
To: Johan Hovold; +Cc: linux-usb, linux-kernel
On Thu, Apr 22, 2021 at 10:49:24AM +0200, Johan Hovold wrote:
> The following changes since commit 1e28eed17697bcf343c6743f0028cc3b5dd88bf0:
>
> Linux 5.12-rc3 (2021-03-14 14:41:02 -0700)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial.git usb-serial-5.13-rc1
Pulled and pushed out, thanks.
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-04-22 9:21 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-22 8:49 [GIT PULL] USB-serial updates for 5.13-rc1 Johan Hovold
2021-04-22 9:20 ` Greg Kroah-Hartman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).