linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shreyansh Chouhan <chouhan.shreyansh630@gmail.com>
To: Alex Elder <elder@ieee.org>
Cc: Joe Perches <joe@perches.com>,
	Greg KH <gregkh@linuxfoundation.org>,
	pure.logic@nexus-software.ie, johan@kernel.org, elder@kernel.org,
	greybus-dev@lists.linaro.org, linux-staging@lists.linux.dev,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] staging: greybus: fix gb_loopback_stats_attrs definition
Date: Sat, 15 May 2021 00:37:25 +0530	[thread overview]
Message-ID: <YJ7Kbb5U71l8ukBD@fedora> (raw)
In-Reply-To: <88d7da63-d03c-7fa3-a881-aff8e7b4a618@ieee.org>

On Fri, May 14, 2021 at 01:53:49PM -0500, Alex Elder wrote:
> On 5/14/21 10:56 AM, Joe Perches wrote:
> > On Fri, 2021-05-14 at 17:30 +0200, Greg KH wrote:
> > > On Fri, May 14, 2021 at 08:42:16PM +0530, Shreyansh Chouhan wrote:
> > []
> > > > I didn't look at how/where was the macro called and missed a very
> > > > obvious error. Now that I have looked at it, the only way I can think of
> > > > fixing this is changing the macro to a (inline?) function. Will
> > > > that be a desirable change?
> > > 
> > > No, it can't be a function, the code is fine as-is, checkpatch is just a
> > > perl script and does not always know what needs to be done.
> > 
> > true.
> > 
> > perhaps better though to rename these declaring macros to start with declare_
> 
> I don't disagree with your suggestion, but it's not clear it
> would have prevented submission of the erroneous initial patch
> (nor future ones from people who blindly follow checkpatch.pl
> suggestions).
> 

Well if it makes any difference, I think such a name would at least make
things a little more clear. Also, adding a comment to the macro definition
might help with the problem of future erronous patches.

Regards,
Shreyansh Chouhan

> 					-Alex
> 
> PS  Lots of negatives in that sentence.
> 
> > Something like this:
> > (with miscellaneous realigning of the macros line ending continuations \)
> > ---
> >   drivers/staging/greybus/loopback.c | 72 +++++++++++++++++++-------------------
> >   1 file changed, 36 insertions(+), 36 deletions(-)
> > 
> > diff --git a/drivers/staging/greybus/loopback.c b/drivers/staging/greybus/loopback.c
> > index 2471448ba42a..dc399792f35f 100644
> > --- a/drivers/staging/greybus/loopback.c
> > +++ b/drivers/staging/greybus/loopback.c
> > @@ -119,18 +119,18 @@ module_param(kfifo_depth, uint, 0444);
> >   #define GB_LOOPBACK_US_WAIT_MAX				1000000
> >   /* interface sysfs attributes */
> > -#define gb_loopback_ro_attr(field)				\
> > -static ssize_t field##_show(struct device *dev,			\
> > +#define declare_gb_loopback_ro_attr(field)				\
> > +static ssize_t field##_show(struct device *dev,				\
> >   			    struct device_attribute *attr,		\
> >   			    char *buf)					\
> >   {									\
> >   	struct gb_loopback *gb = dev_get_drvdata(dev);			\
> > -	return sprintf(buf, "%u\n", gb->field);			\
> > +	return sprintf(buf, "%u\n", gb->field);				\
> >   }									\
> >   static DEVICE_ATTR_RO(field)
> > -#define gb_loopback_ro_stats_attr(name, field, type)		\
> > -static ssize_t name##_##field##_show(struct device *dev,	\
> > +#define declare_gb_loopback_ro_stats_attr(name, field, type)		\
> > +static ssize_t name##_##field##_show(struct device *dev,		\
> >   			    struct device_attribute *attr,		\
> >   			    char *buf)					\
> >   {									\
> > @@ -142,8 +142,8 @@ static ssize_t name##_##field##_show(struct device *dev,	\
> >   }									\
> >   static DEVICE_ATTR_RO(name##_##field)
> > -#define gb_loopback_ro_avg_attr(name)			\
> > -static ssize_t name##_avg_show(struct device *dev,		\
> > +#define declare_gb_loopback_ro_avg_attr(name)				\
> > +static ssize_t name##_avg_show(struct device *dev,			\
> >   			    struct device_attribute *attr,		\
> >   			    char *buf)					\
> >   {									\
> > @@ -151,8 +151,8 @@ static ssize_t name##_avg_show(struct device *dev,		\
> >   	struct gb_loopback *gb;						\
> >   	u64 avg, rem;							\
> >   	u32 count;							\
> > -	gb = dev_get_drvdata(dev);			\
> > -	stats = &gb->name;					\
> > +	gb = dev_get_drvdata(dev);					\
> > +	stats = &gb->name;						\
> >   	count = stats->count ? stats->count : 1;			\
> >   	avg = stats->sum + count / 2000000; /* round closest */		\
> >   	rem = do_div(avg, count);					\
> > @@ -162,12 +162,12 @@ static ssize_t name##_avg_show(struct device *dev,		\
> >   }									\
> >   static DEVICE_ATTR_RO(name##_avg)
> > -#define gb_loopback_stats_attrs(field)				\
> > -	gb_loopback_ro_stats_attr(field, min, u);		\
> > -	gb_loopback_ro_stats_attr(field, max, u);		\
> > -	gb_loopback_ro_avg_attr(field)
> > +#define declare_gb_loopback_stats_attrs(field)				\
> > +	declare_gb_loopback_ro_stats_attr(field, min, u);		\
> > +	declare_gb_loopback_ro_stats_attr(field, max, u);		\
> > +	declare_gb_loopback_ro_avg_attr(field)
> > -#define gb_loopback_attr(field, type)					\
> > +#define declare_gb_loopback_attr(field, type)				\
> >   static ssize_t field##_show(struct device *dev,				\
> >   			    struct device_attribute *attr,		\
> >   			    char *buf)					\
> > @@ -193,8 +193,8 @@ static ssize_t field##_store(struct device *dev,			\
> >   }									\
> >   static DEVICE_ATTR_RW(field)
> > -#define gb_dev_loopback_ro_attr(field, conn)				\
> > -static ssize_t field##_show(struct device *dev,		\
> > +#define declare_gb_dev_loopback_ro_attr(field, conn)			\
> > +static ssize_t field##_show(struct device *dev,				\
> >   			    struct device_attribute *attr,		\
> >   			    char *buf)					\
> >   {									\
> > @@ -203,7 +203,7 @@ static ssize_t field##_show(struct device *dev,		\
> >   }									\
> >   static DEVICE_ATTR_RO(field)
> > -#define gb_dev_loopback_rw_attr(field, type)				\
> > +#define declare_gb_dev_loopback_rw_attr(field, type)			\
> >   static ssize_t field##_show(struct device *dev,				\
> >   			    struct device_attribute *attr,		\
> >   			    char *buf)					\
> > @@ -223,7 +223,7 @@ static ssize_t field##_store(struct device *dev,			\
> >   	if (ret != 1)							\
> >   		len = -EINVAL;						\
> >   	else								\
> > -		gb_loopback_check_attr(gb);		\
> > +		gb_loopback_check_attr(gb);				\
> >   	mutex_unlock(&gb->mutex);					\
> >   	return len;							\
> >   }									\
> > @@ -268,26 +268,26 @@ static void gb_loopback_check_attr(struct gb_loopback *gb)
> >   }
> >   /* Time to send and receive one message */
> > -gb_loopback_stats_attrs(latency);
> > +declare_gb_loopback_stats_attrs(latency);
> >   /* Number of requests sent per second on this cport */
> > -gb_loopback_stats_attrs(requests_per_second);
> > +declare_gb_loopback_stats_attrs(requests_per_second);
> >   /* Quantity of data sent and received on this cport */
> > -gb_loopback_stats_attrs(throughput);
> > +declare_gb_loopback_stats_attrs(throughput);
> >   /* Latency across the UniPro link from APBridge's perspective */
> > -gb_loopback_stats_attrs(apbridge_unipro_latency);
> > +declare_gb_loopback_stats_attrs(apbridge_unipro_latency);
> >   /* Firmware induced overhead in the GPBridge */
> > -gb_loopback_stats_attrs(gbphy_firmware_latency);
> > +declare_gb_loopback_stats_attrs(gbphy_firmware_latency);
> >   /* Number of errors encountered during loop */
> > -gb_loopback_ro_attr(error);
> > +declare_gb_loopback_ro_attr(error);
> >   /* Number of requests successfully completed async */
> > -gb_loopback_ro_attr(requests_completed);
> > +declare_gb_loopback_ro_attr(requests_completed);
> >   /* Number of requests timed out async */
> > -gb_loopback_ro_attr(requests_timedout);
> > +declare_gb_loopback_ro_attr(requests_timedout);
> >   /* Timeout minimum in useconds */
> > -gb_loopback_ro_attr(timeout_min);
> > +declare_gb_loopback_ro_attr(timeout_min);
> >   /* Timeout minimum in useconds */
> > -gb_loopback_ro_attr(timeout_max);
> > +declare_gb_loopback_ro_attr(timeout_max);
> >   /*
> >    * Type of loopback message to send based on protocol type definitions
> > @@ -297,21 +297,21 @@ gb_loopback_ro_attr(timeout_max);
> >    *					   payload returned in response)
> >    * 4 => Send a sink message (message with payload, no payload in response)
> >    */
> > -gb_dev_loopback_rw_attr(type, d);
> > +declare_gb_dev_loopback_rw_attr(type, d);
> >   /* Size of transfer message payload: 0-4096 bytes */
> > -gb_dev_loopback_rw_attr(size, u);
> > +declare_gb_dev_loopback_rw_attr(size, u);
> >   /* Time to wait between two messages: 0-1000 ms */
> > -gb_dev_loopback_rw_attr(us_wait, d);
> > +declare_gb_dev_loopback_rw_attr(us_wait, d);
> >   /* Maximum iterations for a given operation: 1-(2^32-1), 0 implies infinite */
> > -gb_dev_loopback_rw_attr(iteration_max, u);
> > +declare_gb_dev_loopback_rw_attr(iteration_max, u);
> >   /* The current index of the for (i = 0; i < iteration_max; i++) loop */
> > -gb_dev_loopback_ro_attr(iteration_count, false);
> > +declare_gb_dev_loopback_ro_attr(iteration_count, false);
> >   /* A flag to indicate synchronous or asynchronous operations */
> > -gb_dev_loopback_rw_attr(async, u);
> > +declare_gb_dev_loopback_rw_attr(async, u);
> >   /* Timeout of an individual asynchronous request */
> > -gb_dev_loopback_rw_attr(timeout, u);
> > +declare_gb_dev_loopback_rw_attr(timeout, u);
> >   /* Maximum number of in-flight operations before back-off */
> > -gb_dev_loopback_rw_attr(outstanding_operations_max, u);
> > +declare_gb_dev_loopback_rw_attr(outstanding_operations_max, u);
> >   static struct attribute *loopback_attrs[] = {
> >   	&dev_attr_latency_min.attr,
> > 
> 

  reply	other threads:[~2021-05-14 19:07 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-14 13:30 [PATCH] staging: greybus: fix gb_loopback_stats_attrs definition Shreyansh Chouhan
2021-05-14 13:36 ` Greg KH
2021-05-14 13:48   ` Shreyansh Chouhan
2021-05-14 14:05     ` Greg KH
2021-05-14 14:23       ` Shreyansh Chouhan
2021-05-14 14:30         ` Greg KH
2021-05-14 15:12           ` Shreyansh Chouhan
2021-05-14 15:30             ` Greg KH
2021-05-14 15:34               ` Shreyansh Chouhan
2021-05-14 15:56               ` Joe Perches
2021-05-14 16:51                 ` Shreyansh Chouhan
2021-05-14 18:04                 ` Shreyansh Chouhan
2021-05-14 18:53                 ` Alex Elder
2021-05-14 19:07                   ` Shreyansh Chouhan [this message]
2021-05-14 19:32                   ` Joe Perches
2021-05-14 19:40                   ` Shreyansh Chouhan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YJ7Kbb5U71l8ukBD@fedora \
    --to=chouhan.shreyansh630@gmail.com \
    --cc=elder@ieee.org \
    --cc=elder@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=greybus-dev@lists.linaro.org \
    --cc=joe@perches.com \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=pure.logic@nexus-software.ie \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).