Re: [RFC PATCH net-next v3 04/20] net: dsa: qca8k: handle qca8k_set_page errors

From: Andrew Lunn <andrew@lunn.ch>
To: Ansuel Smith <ansuelsmth@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Russell King <linux@armlinux.org.uk>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH net-next v3 04/20] net: dsa: qca8k: handle qca8k_set_page errors
Date: Wed, 5 May 2021 02:25:39 +0200	[thread overview]
Message-ID: <YJHmAxsyh08CnPHA@lunn.ch> (raw)
In-Reply-To: <20210504222915.17206-4-ansuelsmth@gmail.com>

> +static int
>  qca8k_set_page(struct mii_bus *bus, u16 page)
>  {
>  	if (page == qca8k_current_page)
> -		return;
> +		return 0;
>  
> -	if (bus->write(bus, 0x18, 0, page) < 0)
> +	if (bus->write(bus, 0x18, 0, page) < 0) {
>  		dev_err_ratelimited(&bus->dev,
>  				    "failed to set qca8k page\n");
> +		return -EBUSY;

EBUSY is a bit odd. bus->write() should return an error code. Please
return that.

> @@ -161,14 +169,19 @@ static void
>  qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
>  {
>  	u16 r1, r2, page;
> +	int ret;
>  
>  	qca8k_split_addr(reg, &r1, &r2, &page);
>  
>  	mutex_lock_nested(&priv->bus->mdio_lock, MDIO_MUTEX_NESTED);
>  
> -	qca8k_set_page(priv->bus, page);
> +	ret = qca8k_set_page(priv->bus, page);
> +	if (ret < 0)
> +		goto exit;
> +
>  	qca8k_mii_write32(priv->bus, 0x10 | r2, r1, val);
>  
> +exit:
>  	mutex_unlock(&priv->bus->mdio_lock);

Maybe make this function also return the error? 

>  }