From: Andrew Lunn <andrew@lunn.ch>
To: Peter Geis <pgwipeout@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
linux-rockchip@lists.infradead.org
Subject: Re: [PATCH v2] net: phy: add driver for Motorcomm yt8511 phy
Date: Wed, 12 May 2021 02:48:46 +0200 [thread overview]
Message-ID: <YJsl7rLVI6ShqZvI@lunn.ch> (raw)
In-Reply-To: <20210511225913.2951922-1-pgwipeout@gmail.com>
On Tue, May 11, 2021 at 06:59:13PM -0400, Peter Geis wrote:
> Add a driver for the Motorcomm yt8511 phy that will be used in the
> production Pine64 rk3566-quartz64 development board.
> It supports gigabit transfer speeds, rgmii, and 125mhz clk output.
Hi Peter
Please can you add minimal RGMII delay support. Trying to add it later
generally end up in backwards compatibility problems.
Do you know which one of the four RGMII modes your setup needs? Is the
PHY adding the Rx and Tx delays? So "rgmii-id"?
Andrew
next prev parent reply other threads:[~2021-05-12 0:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-11 22:59 [PATCH v2] net: phy: add driver for Motorcomm yt8511 phy Peter Geis
2021-05-12 0:48 ` Andrew Lunn [this message]
2021-05-12 1:45 ` Peter Geis
2021-05-12 12:38 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YJsl7rLVI6ShqZvI@lunn.ch \
--to=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pgwipeout@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).