From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Thara Gopinath <thara.gopinath@linaro.org>
Cc: agross@kernel.org, rui.zhang@intel.com,
daniel.lezcano@linaro.org, viresh.kumar@linaro.org,
rjw@rjwysocki.net, robh+dt@kernel.org, tdas@codeaurora.org,
mka@chromium.org, linux-arm-msm@vger.kernel.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Subject: Re: [Patch v3 5/6] arm64: boot: dts: qcom: sdm845: Remove cpufreq cooling devices for CPU thermal zones
Date: Fri, 9 Jul 2021 23:17:47 -0500 [thread overview]
Message-ID: <YOkfa3nG3l5djiYD@yoga> (raw)
In-Reply-To: <20210708120656.663851-6-thara.gopinath@linaro.org>
On Thu 08 Jul 07:06 CDT 2021, Thara Gopinath wrote:
> Now that Limits h/w is enabled to monitor thermal events around cpus and
> throttle the cpu frequencies, remove cpufreq cooling device for the CPU
> thermal zones which does software throttling of cpu frequencies.
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
> ---
>
> v2->v3:
> - Improved the subject header and descrption to better reflect the
> patch as per Matthias's review comments.
>
> v1->v2:
> Removing only cooling maps for cpu specific thermal zones keeping the
> trip point definitions intact as per Daniel's suggestion. This is to
> ensure that thermal zone temparature and trip violation information is
> available to any userspace daemon monitoring these zones.
>
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 136 ---------------------------
> 1 file changed, 136 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 4da6b8f3dd7b..6185fff8859a 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -4994,23 +4994,6 @@ cpu0_crit: cpu_crit {
> type = "critical";
> };
> };
> -
> - cooling-maps {
> - map0 {
> - trip = <&cpu0_alert0>;
> - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - map1 {
> - trip = <&cpu0_alert1>;
> - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - };
> };
>
> cpu1-thermal {
> @@ -5038,23 +5021,6 @@ cpu1_crit: cpu_crit {
> type = "critical";
> };
> };
> -
> - cooling-maps {
> - map0 {
> - trip = <&cpu1_alert0>;
> - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - map1 {
> - trip = <&cpu1_alert1>;
> - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - };
> };
>
> cpu2-thermal {
> @@ -5082,23 +5048,6 @@ cpu2_crit: cpu_crit {
> type = "critical";
> };
> };
> -
> - cooling-maps {
> - map0 {
> - trip = <&cpu2_alert0>;
> - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - map1 {
> - trip = <&cpu2_alert1>;
> - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - };
> };
>
> cpu3-thermal {
> @@ -5126,23 +5075,6 @@ cpu3_crit: cpu_crit {
> type = "critical";
> };
> };
> -
> - cooling-maps {
> - map0 {
> - trip = <&cpu3_alert0>;
> - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - map1 {
> - trip = <&cpu3_alert1>;
> - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - };
> };
>
> cpu4-thermal {
> @@ -5170,23 +5102,6 @@ cpu4_crit: cpu_crit {
> type = "critical";
> };
> };
> -
> - cooling-maps {
> - map0 {
> - trip = <&cpu4_alert0>;
> - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - map1 {
> - trip = <&cpu4_alert1>;
> - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - };
> };
>
> cpu5-thermal {
> @@ -5214,23 +5129,6 @@ cpu5_crit: cpu_crit {
> type = "critical";
> };
> };
> -
> - cooling-maps {
> - map0 {
> - trip = <&cpu5_alert0>;
> - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - map1 {
> - trip = <&cpu5_alert1>;
> - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - };
> };
>
> cpu6-thermal {
> @@ -5258,23 +5156,6 @@ cpu6_crit: cpu_crit {
> type = "critical";
> };
> };
> -
> - cooling-maps {
> - map0 {
> - trip = <&cpu6_alert0>;
> - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - map1 {
> - trip = <&cpu6_alert1>;
> - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - };
> };
>
> cpu7-thermal {
> @@ -5302,23 +5183,6 @@ cpu7_crit: cpu_crit {
> type = "critical";
> };
> };
> -
> - cooling-maps {
> - map0 {
> - trip = <&cpu7_alert0>;
> - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - map1 {
> - trip = <&cpu7_alert1>;
> - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> - };
> - };
> };
>
> aoss0-thermal {
> --
> 2.25.1
>
next prev parent reply other threads:[~2021-07-10 4:17 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-08 12:06 [Patch v3 0/6] Introduce LMh driver for Qualcomm SoCs Thara Gopinath
2021-07-08 12:06 ` [Patch v3 1/6] firmware: qcom_scm: Introduce SCM calls to access LMh Thara Gopinath
2021-07-10 4:02 ` Bjorn Andersson
2021-07-08 12:06 ` [Patch v3 2/6] thermal: qcom: Add support for LMh driver Thara Gopinath
2021-07-10 4:15 ` Bjorn Andersson
2021-07-13 0:49 ` Thara Gopinath
2021-07-08 12:06 ` [Patch v3 3/6] cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support Thara Gopinath
2021-07-09 6:46 ` Viresh Kumar
2021-07-09 15:37 ` Thara Gopinath
2021-07-12 4:35 ` Viresh Kumar
2021-07-12 4:41 ` Viresh Kumar
2021-07-13 1:18 ` Thara Gopinath
2021-07-13 3:18 ` Viresh Kumar
2021-07-14 12:37 ` Thara Gopinath
2021-07-10 4:57 ` Bjorn Andersson
2021-07-13 1:09 ` Thara Gopinath
2021-07-08 12:06 ` [Patch v3 4/6] arm64: boot: dts: qcom: sdm45: Add support for LMh node Thara Gopinath
2021-07-10 4:17 ` Bjorn Andersson
2021-07-19 16:33 ` Bjorn Andersson
2021-07-19 22:44 ` Thara Gopinath
2021-07-08 12:06 ` [Patch v3 5/6] arm64: boot: dts: qcom: sdm845: Remove cpufreq cooling devices for CPU thermal zones Thara Gopinath
2021-07-10 4:17 ` Bjorn Andersson [this message]
2021-07-08 12:06 ` [Patch v3 6/6] dt-bindings: thermal: Add dt binding for QCOM LMh Thara Gopinath
2021-07-10 4:21 ` Bjorn Andersson
2021-07-13 0:54 ` Thara Gopinath
2021-07-12 17:32 ` Rob Herring
2021-07-22 3:14 ` [Patch v3 0/6] Introduce LMh driver for Qualcomm SoCs Steev Klimaszewski
2021-07-27 15:29 ` Thara Gopinath
2021-07-27 17:43 ` Steev Klimaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YOkfa3nG3l5djiYD@yoga \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mka@chromium.org \
--cc=rjw@rjwysocki.net \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=tdas@codeaurora.org \
--cc=thara.gopinath@linaro.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).