linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4] tty: n_gsm: delete DISC command frame as requester
@ 2021-07-05 11:59 Zhenguo Zhao
  2021-07-05 12:36 ` Greg KH
  2021-07-21 10:22 ` Greg KH
  0 siblings, 2 replies; 3+ messages in thread
From: Zhenguo Zhao @ 2021-07-05 11:59 UTC (permalink / raw)
  To: zhenguo6858, gregkh, jirislaby; +Cc: linux-kernel

From: Zhenguo Zhao <Zhenguo.Zhao1@unisoc.com>

as initiator,it need to send DISC command ,as requester,there is
no need to send the DISC control frame,it will cause redundant data.

Signed-off-by: Zhenguo Zhao <Zhenguo.Zhao1@unisoc.com>
---
 drivers/tty/n_gsm.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 5fea02c..ea9c750 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2050,7 +2050,8 @@ static int gsm_disconnect(struct gsm_mux *gsm)
 	del_timer_sync(&gsm->t2_timer);
 	/* Now we are sure T2 has stopped */
 
-	gsm_dlci_begin_close(dlci);
+	if (gsm->initiator)
+		gsm_dlci_begin_close(dlci);
 	wait_event_interruptible(gsm->event,
 				dlci->state == DLCI_CLOSED);
 
@@ -3024,7 +3025,8 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp)
 	mutex_unlock(&dlci->mutex);
 	if (tty_port_close_start(&dlci->port, tty, filp) == 0)
 		return;
-	gsm_dlci_begin_close(dlci);
+	if (dlci->gsm->initiator)
+		gsm_dlci_begin_close(dlci);
 	if (tty_port_initialized(&dlci->port) && C_HUPCL(tty))
 		tty_port_lower_dtr_rts(&dlci->port);
 	tty_port_close_end(&dlci->port, tty);
@@ -3035,10 +3037,12 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp)
 static void gsmtty_hangup(struct tty_struct *tty)
 {
 	struct gsm_dlci *dlci = tty->driver_data;
+	struct gsm_mux *gsm = dlci->gsm;
 	if (dlci->state == DLCI_CLOSED)
 		return;
 	tty_port_hangup(&dlci->port);
-	gsm_dlci_begin_close(dlci);
+	if (gsm->initiator)
+		gsm_dlci_begin_close(dlci);
 }
 
 static int gsmtty_write(struct tty_struct *tty, const unsigned char *buf,
-- 
1.9.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v4] tty: n_gsm: delete DISC command frame as requester
  2021-07-05 11:59 [PATCH v4] tty: n_gsm: delete DISC command frame as requester Zhenguo Zhao
@ 2021-07-05 12:36 ` Greg KH
  2021-07-21 10:22 ` Greg KH
  1 sibling, 0 replies; 3+ messages in thread
From: Greg KH @ 2021-07-05 12:36 UTC (permalink / raw)
  To: Zhenguo Zhao; +Cc: jirislaby, linux-kernel

On Mon, Jul 05, 2021 at 07:59:42PM +0800, Zhenguo Zhao wrote:
> From: Zhenguo Zhao <Zhenguo.Zhao1@unisoc.com>
> 
> as initiator,it need to send DISC command ,as requester,there is
> no need to send the DISC control frame,it will cause redundant data.
> 
> Signed-off-by: Zhenguo Zhao <Zhenguo.Zhao1@unisoc.com>
> ---
>  drivers/tty/n_gsm.c | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
> index 5fea02c..ea9c750 100644
> --- a/drivers/tty/n_gsm.c
> +++ b/drivers/tty/n_gsm.c
> @@ -2050,7 +2050,8 @@ static int gsm_disconnect(struct gsm_mux *gsm)
>  	del_timer_sync(&gsm->t2_timer);
>  	/* Now we are sure T2 has stopped */
>  
> -	gsm_dlci_begin_close(dlci);
> +	if (gsm->initiator)
> +		gsm_dlci_begin_close(dlci);
>  	wait_event_interruptible(gsm->event,
>  				dlci->state == DLCI_CLOSED);
>  
> @@ -3024,7 +3025,8 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp)
>  	mutex_unlock(&dlci->mutex);
>  	if (tty_port_close_start(&dlci->port, tty, filp) == 0)
>  		return;
> -	gsm_dlci_begin_close(dlci);
> +	if (dlci->gsm->initiator)
> +		gsm_dlci_begin_close(dlci);
>  	if (tty_port_initialized(&dlci->port) && C_HUPCL(tty))
>  		tty_port_lower_dtr_rts(&dlci->port);
>  	tty_port_close_end(&dlci->port, tty);
> @@ -3035,10 +3037,12 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp)
>  static void gsmtty_hangup(struct tty_struct *tty)
>  {
>  	struct gsm_dlci *dlci = tty->driver_data;
> +	struct gsm_mux *gsm = dlci->gsm;
>  	if (dlci->state == DLCI_CLOSED)
>  		return;
>  	tty_port_hangup(&dlci->port);
> -	gsm_dlci_begin_close(dlci);
> +	if (gsm->initiator)
> +		gsm_dlci_begin_close(dlci);
>  }
>  
>  static int gsmtty_write(struct tty_struct *tty, const unsigned char *buf,
> -- 
> 1.9.1
> 

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- This looks like a new version of a previously submitted patch, but you
  did not list below the --- line any changes from the previous version.
  Please read the section entitled "The canonical patch format" in the
  kernel file, Documentation/SubmittingPatches for what needs to be done
  here to properly describe this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH v4] tty: n_gsm: delete DISC command frame as requester
  2021-07-05 11:59 [PATCH v4] tty: n_gsm: delete DISC command frame as requester Zhenguo Zhao
  2021-07-05 12:36 ` Greg KH
@ 2021-07-21 10:22 ` Greg KH
  1 sibling, 0 replies; 3+ messages in thread
From: Greg KH @ 2021-07-21 10:22 UTC (permalink / raw)
  To: Zhenguo Zhao; +Cc: jirislaby, linux-kernel

On Mon, Jul 05, 2021 at 07:59:42PM +0800, Zhenguo Zhao wrote:
> From: Zhenguo Zhao <Zhenguo.Zhao1@unisoc.com>
> 
> as initiator,it need to send DISC command ,as requester,there is
> no need to send the DISC control frame,it will cause redundant data.

I am really sorry, but I can not understand what the problem is here,
nor what you are saying is being changed.

Can you try to resend this with a more expanded changelog text?  Perhaps
get someone else to help out with the wording?


> 
> Signed-off-by: Zhenguo Zhao <Zhenguo.Zhao1@unisoc.com>
> ---
>  drivers/tty/n_gsm.c | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
> index 5fea02c..ea9c750 100644
> --- a/drivers/tty/n_gsm.c
> +++ b/drivers/tty/n_gsm.c
> @@ -2050,7 +2050,8 @@ static int gsm_disconnect(struct gsm_mux *gsm)
>  	del_timer_sync(&gsm->t2_timer);
>  	/* Now we are sure T2 has stopped */
>  
> -	gsm_dlci_begin_close(dlci);
> +	if (gsm->initiator)
> +		gsm_dlci_begin_close(dlci);
>  	wait_event_interruptible(gsm->event,
>  				dlci->state == DLCI_CLOSED);
>  
> @@ -3024,7 +3025,8 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp)
>  	mutex_unlock(&dlci->mutex);
>  	if (tty_port_close_start(&dlci->port, tty, filp) == 0)
>  		return;
> -	gsm_dlci_begin_close(dlci);
> +	if (dlci->gsm->initiator)
> +		gsm_dlci_begin_close(dlci);
>  	if (tty_port_initialized(&dlci->port) && C_HUPCL(tty))
>  		tty_port_lower_dtr_rts(&dlci->port);
>  	tty_port_close_end(&dlci->port, tty);
> @@ -3035,10 +3037,12 @@ static void gsmtty_close(struct tty_struct *tty, struct file *filp)
>  static void gsmtty_hangup(struct tty_struct *tty)
>  {
>  	struct gsm_dlci *dlci = tty->driver_data;
> +	struct gsm_mux *gsm = dlci->gsm;
>  	if (dlci->state == DLCI_CLOSED)

You have a coding style issue here now, so I can't take this anyway :(

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-07-21 10:36 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-05 11:59 [PATCH v4] tty: n_gsm: delete DISC command frame as requester Zhenguo Zhao
2021-07-05 12:36 ` Greg KH
2021-07-21 10:22 ` Greg KH

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).