Re: [PATCH v10 0/3] media: imx: add support for imx8mq MIPI RX

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Martin,

On Wed, Jul 28, 2021 at 11:12:42AM +0200, Martin Kepplinger wrote:
> hi,
> 
> This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller.
> 
> It includes the driver, the dt-bindings and the DT addition to the SoC dtsi.
> I test it using libcamera. Thanks to Laurent who helped a lot. I'm happy for
> any feedback,

Thank you for the series. I've submitted a pull request that contains
patches 1/3 and 2/3.

Shawn, Sascha, how would you like to handle 3/3 ?

> revision history
> ----------------
> v10: (thank you Dafna)
> * improve send_level documentation.
> * add some comments to 0x180 and 0x184
> * after re-reading I could eliminate the unneeded setting of 0x184 (ignored
>   by setting 0x180 to 1).
> 
> v9: (thank you Laurent)
> * improve getting the esc clock rate for hs_settle
> https://lore.kernel.org/linux-media/20210726082117.2423597-1-martin.kepplinger@puri.sm/
> 
> v8: (thank you Laurent)
> * calculate hs_settle for any clk rate and mode
> * add reviewed-by tag
> https://lore.kernel.org/linux-media/20210723101217.1954805-1-martin.kepplinger@puri.sm/T/
> 
> v7: (thank you Laurent and Rob)
> * fix the binding example (include the reset driver)
> * use pm_runtime_resume_and_get()
> * fix some logic in init_cfg()
> * add some useful code comments and fix minor bits found by Laurent in v6
> https://lore.kernel.org/linux-media/20210716102244.581182-1-martin.kepplinger@puri.sm/T/#t
> 
> v6: (thank you Laurent and Rob)
> * add reviewed-by tag to binding
> * statically allocate clk_bulk_data
> * fix how the hs_settle value is applied
> * remove s_power calls
> * remove the link_setup() callback implementation and make the link immutable
> * more cleanups according to Laurents' review from v5
> https://lore.kernel.org/linux-media/20210714111931.324485-1-martin.kepplinger@puri.sm/
> 
> v5: (thank you Laurent)
> * fix reset usage by using the already supported reset controller driver
> * remove clko2 (totally unrelated clock / had been included by accident)
> * rename pxl clock to ui
> https://lore.kernel.org/linux-media/20210618095753.114557-1-martin.kepplinger@puri.sm/
> 
> v4: (thank you Rob and Marco)
> * create fsl,mipi-phy-gpr custom dt property instead of confusing "phy"
> * add imx8mq-specific compatibile to imx8mq.dtsi for future use
> https://lore.kernel.org/linux-media/20210614121522.2944593-1-martin.kepplinger@puri.sm/
> 
> v3: (thank you, Rob and Laurent)
> among minor other things according to v2 review, changes include:
> * better describe the clocks
> * rename DT property "phy-reset" to "reset" and "phy-gpr" to "phy"
> https://lore.kernel.org/linux-media/20210608104128.1616028-1-martin.kepplinger@puri.sm/T/#t
> 
> v2: (thank you, Dan and Guido)
> among fixes according to v1 reviews, changes include:
> * remove status property from dt-bindings example
> * define a few bits in order to have less magic values
> * use "imx8mq_mipi_csi_" as local function prefix
> * read DT properties only during probe()
> * remove dead code (log_status)
> * add imx8mq_mipi_csi_release_icc()
> * fix imx8mq_mipi_csi_init_icc()
> https://lore.kernel.org/linux-media/20210531112326.90094-1-martin.kepplinger@puri.sm/
> 
> v1:
> https://lore.kernel.org/linux-media/20210527075407.3180744-1-martin.kepplinger@puri.sm/T/#t
> 
> 
> Martin Kepplinger (3):
>   dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and
>     controller
>   media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller
>   arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions
> 
>  .../bindings/media/nxp,imx8mq-mipi-csi2.yaml  | 174 +++
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi     | 104 ++
>  drivers/staging/media/imx/Makefile            |   1 +
>  drivers/staging/media/imx/imx8mq-mipi-csi2.c  | 991 ++++++++++++++++++
>  4 files changed, 1270 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
>  create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c

-- 
Regards,

Laurent Pinchart