linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Borislav Petkov <bp@alien8.de>
To: Kuppuswamy Sathyanarayanan  <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>,
	Peter Zijlstra <peterz@infradead.org>,
	Andy Lutomirski <luto@kernel.org>, Peter H Anvin <hpa@zytor.com>,
	Dave Hansen <dave.hansen@intel.com>,
	Tony Luck <tony.luck@intel.com>,
	Dan Williams <dan.j.williams@intel.com>,
	Andi Kleen <ak@linux.intel.com>,
	Kirill Shutemov <kirill.shutemov@linux.intel.com>,
	Sean Christopherson <seanjc@google.com>,
	Kuppuswamy Sathyanarayanan <knsathya@kernel.org>,
	x86@kernel.org, linux-kernel@vger.kernel.org,
	Juergen Gross <jgross@suse.com>, Deep Shah <sdeep@vmware.com>,
	"VMware, Inc." <pv-drivers@vmware.com>
Subject: Re: [PATCH v5 01/12] x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT
Date: Thu, 12 Aug 2021 09:18:19 +0200	[thread overview]
Message-ID: <YRTLO0eQOEChETId@zn.tnic> (raw)
In-Reply-To: <20210804181329.2899708-2-sathyanarayanan.kuppuswamy@linux.intel.com>

On Wed, Aug 04, 2021 at 11:13:18AM -0700, Kuppuswamy Sathyanarayanan wrote:
> From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
> 
> CONFIG_PARAVIRT_XXL is mainly defined/used by XEN PV guests. For
> other VM guest types, features supported under CONFIG_PARAVIRT
> are self sufficient. CONFIG_PARAVIRT mainly provides support for
> TLB flush operations and time related operations.
> 
> For TDX guest as well, paravirt calls under CONFIG_PARVIRT meets
> most of its requirement except the need of HLT and SAFE_HLT
> paravirt calls, which is currently defined under
> COFNIG_PARAVIRT_XXL.
> 
> Since enabling CONFIG_PARAVIRT_XXL is too bloated for TDX guest
> like platforms, move HLT and SAFE_HLT paravirt calls under
> CONFIG_PARAVIRT.
> 
> Moving HLT and SAFE_HLT paravirt calls are not fatal and should not
> break any functionality for current users of CONFIG_PARAVIRT.
> 
> Co-developed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
> Reviewed-by: Andi Kleen <ak@linux.intel.com>
> Reviewed-by: Tony Luck <tony.luck@intel.com>
> ---

You need to do this before sending your patches:

./scripts/get_maintainer.pl /tmp/tdx.01
Thomas Gleixner <tglx@linutronix.de> (maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT),commit_signer:1/6=17%)
Ingo Molnar <mingo@redhat.com> (maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT))
Borislav Petkov <bp@alien8.de> (maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT),commit_signer:6/6=100%)
x86@kernel.org (maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT))
"H. Peter Anvin" <hpa@zytor.com> (reviewer:X86 ARCHITECTURE (32-BIT AND 64-BIT))
Juergen Gross <jgross@suse.com> (supporter:PARAVIRT_OPS INTERFACE,commit_signer:5/6=83%,authored:5/6=83%,added_lines:15/16=94%,removed_lines:38/39=97%)
Deep Shah <sdeep@vmware.com> (supporter:PARAVIRT_OPS INTERFACE)
"VMware, Inc." <pv-drivers@vmware.com> (supporter:PARAVIRT_OPS INTERFACE)
...

and CC also the supporters - I'm pretty sure at least Juergen would like
to be kept up-to-date on pv changes. I'll CC him and the others now and
leave in the whole diff but make sure you do that in the future please.

>  arch/x86/include/asm/irqflags.h       | 40 +++++++++++++++------------
>  arch/x86/include/asm/paravirt.h       | 20 +++++++-------
>  arch/x86/include/asm/paravirt_types.h |  3 +-
>  arch/x86/kernel/paravirt.c            |  4 ++-
>  4 files changed, 36 insertions(+), 31 deletions(-)
> 
> diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
> index c5ce9845c999..f3bb33b1715d 100644
> --- a/arch/x86/include/asm/irqflags.h
> +++ b/arch/x86/include/asm/irqflags.h
> @@ -59,6 +59,28 @@ static inline __cpuidle void native_halt(void)
>  
>  #endif
>  
> +#ifndef CONFIG_PARAVIRT
> +#ifndef __ASSEMBLY__
> +/*
> + * Used in the idle loop; sti takes one instruction cycle
> + * to complete:
> + */
> +static inline __cpuidle void arch_safe_halt(void)
> +{
> +	native_safe_halt();
> +}
> +
> +/*
> + * Used when interrupts are already enabled or to
> + * shutdown the processor:
> + */
> +static inline __cpuidle void halt(void)
> +{
> +	native_halt();
> +}
> +#endif /* __ASSEMBLY__ */
> +#endif /* CONFIG_PARAVIRT */
> +
>  #ifdef CONFIG_PARAVIRT_XXL
>  #include <asm/paravirt.h>
>  #else
> @@ -80,24 +102,6 @@ static __always_inline void arch_local_irq_enable(void)
>  	native_irq_enable();
>  }
>  
> -/*
> - * Used in the idle loop; sti takes one instruction cycle
> - * to complete:
> - */
> -static inline __cpuidle void arch_safe_halt(void)
> -{
> -	native_safe_halt();
> -}
> -
> -/*
> - * Used when interrupts are already enabled or to
> - * shutdown the processor:
> - */
> -static inline __cpuidle void halt(void)
> -{
> -	native_halt();
> -}
> -
>  /*
>   * For spinlocks, etc:
>   */
> diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
> index da3a1ac82be5..d323a626c7a8 100644
> --- a/arch/x86/include/asm/paravirt.h
> +++ b/arch/x86/include/asm/paravirt.h
> @@ -97,6 +97,16 @@ static inline void paravirt_arch_exit_mmap(struct mm_struct *mm)
>  	PVOP_VCALL1(mmu.exit_mmap, mm);
>  }
>  
> +static inline void arch_safe_halt(void)
> +{
> +	PVOP_VCALL0(irq.safe_halt);
> +}
> +
> +static inline void halt(void)
> +{
> +	PVOP_VCALL0(irq.halt);
> +}
> +
>  #ifdef CONFIG_PARAVIRT_XXL
>  static inline void load_sp0(unsigned long sp0)
>  {
> @@ -162,16 +172,6 @@ static inline void __write_cr4(unsigned long x)
>  	PVOP_VCALL1(cpu.write_cr4, x);
>  }
>  
> -static inline void arch_safe_halt(void)
> -{
> -	PVOP_VCALL0(irq.safe_halt);
> -}
> -
> -static inline void halt(void)
> -{
> -	PVOP_VCALL0(irq.halt);
> -}
> -
>  static inline void wbinvd(void)
>  {
>  	PVOP_ALT_VCALL0(cpu.wbinvd, "wbinvd", ALT_NOT(X86_FEATURE_XENPV));
> diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
> index d9d6b0203ec4..40082847f314 100644
> --- a/arch/x86/include/asm/paravirt_types.h
> +++ b/arch/x86/include/asm/paravirt_types.h
> @@ -150,10 +150,9 @@ struct pv_irq_ops {
>  	struct paravirt_callee_save save_fl;
>  	struct paravirt_callee_save irq_disable;
>  	struct paravirt_callee_save irq_enable;
> -
> +#endif
>  	void (*safe_halt)(void);
>  	void (*halt)(void);
> -#endif
>  } __no_randomize_layout;
>  
>  struct pv_mmu_ops {
> diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
> index 04cafc057bed..124e0f6c5d1c 100644
> --- a/arch/x86/kernel/paravirt.c
> +++ b/arch/x86/kernel/paravirt.c
> @@ -283,9 +283,11 @@ struct paravirt_patch_template pv_ops = {
>  	.irq.save_fl		= __PV_IS_CALLEE_SAVE(native_save_fl),
>  	.irq.irq_disable	= __PV_IS_CALLEE_SAVE(native_irq_disable),
>  	.irq.irq_enable		= __PV_IS_CALLEE_SAVE(native_irq_enable),
> +#endif /* CONFIG_PARAVIRT_XXL */
> +
> +	/* Irq HLT ops. */

What's that comment for?

>  	.irq.safe_halt		= native_safe_halt,
>  	.irq.halt		= native_halt,
> -#endif /* CONFIG_PARAVIRT_XXL */
>  
>  	/* Mmu ops. */
>  	.mmu.flush_tlb_user	= native_flush_tlb_local,
> -- 
> 2.25.1
> 

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette

  reply	other threads:[~2021-08-12  7:17 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-04 18:13 [PATCH v5 00/12] Add TDX Guest Support (Initial support) Kuppuswamy Sathyanarayanan
2021-08-04 18:13 ` [PATCH v5 01/12] x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT Kuppuswamy Sathyanarayanan
2021-08-12  7:18   ` Borislav Petkov [this message]
2021-08-12 17:17     ` Kuppuswamy, Sathyanarayanan
2021-08-17 12:50     ` Juergen Gross
2021-08-17 13:16       ` Kuppuswamy, Sathyanarayanan
2021-08-17 13:28         ` Juergen Gross
2021-08-17 13:39           ` Kuppuswamy, Sathyanarayanan
2021-08-17 13:47             ` Juergen Gross
2021-08-17 13:50               ` Kuppuswamy, Sathyanarayanan
2021-08-04 18:13 ` [PATCH v5 02/12] x86/tdx: Introduce INTEL_TDX_GUEST config option Kuppuswamy Sathyanarayanan
2021-08-04 18:13 ` [PATCH v5 03/12] x86/cpufeatures: Add TDX Guest CPU feature Kuppuswamy Sathyanarayanan
2021-08-12  7:39   ` Borislav Petkov
2021-08-04 18:13 ` [PATCH v5 04/12] x86/tdx: Add protected guest support for TDX guest Kuppuswamy Sathyanarayanan
2021-08-04 21:59   ` Sean Christopherson
2021-08-04 22:03     ` Dave Hansen
2021-08-04 22:26       ` Kuppuswamy, Sathyanarayanan
2021-08-04 22:42         ` Sean Christopherson
2021-08-04 23:00           ` Kuppuswamy, Sathyanarayanan
2021-08-12  7:53             ` Borislav Petkov
2021-08-12 17:18               ` Kuppuswamy, Sathyanarayanan
2021-08-20 14:28                 ` Borislav Petkov
2021-08-20 16:42                   ` Kuppuswamy, Sathyanarayanan
2021-08-20 16:59                     ` Borislav Petkov
2021-08-20 17:11                       ` Kuppuswamy, Sathyanarayanan
2021-08-04 18:13 ` [PATCH v5 05/12] x86/tdx: Add __tdx_module_call() and __tdx_hypercall() helper functions Kuppuswamy Sathyanarayanan
2021-08-20 15:16   ` Borislav Petkov
2021-08-04 18:13 ` [PATCH v5 06/12] x86/tdx: Get TD execution environment information via TDINFO Kuppuswamy Sathyanarayanan
2021-08-04 22:38   ` Sean Christopherson
2021-08-20 17:13   ` Borislav Petkov
2021-08-20 17:31     ` Kuppuswamy, Sathyanarayanan
2021-08-20 17:35       ` Borislav Petkov
2021-08-20 18:29         ` Kuppuswamy, Sathyanarayanan
2021-08-20 18:58           ` Andi Kleen
2021-08-20 19:01             ` Kuppuswamy, Sathyanarayanan
2021-08-04 18:13 ` [PATCH v5 07/12] x86/traps: Add #VE support for TDX guest Kuppuswamy Sathyanarayanan
2021-08-24 10:17   ` Borislav Petkov
2021-08-24 17:32     ` Kuppuswamy, Sathyanarayanan
2021-08-24 17:36       ` Dave Hansen
2021-08-24 17:46       ` Borislav Petkov
2021-09-02 15:24         ` Kuppuswamy, Sathyanarayanan
2021-09-03 10:17           ` Borislav Petkov
2021-08-04 18:13 ` [PATCH v5 08/12] x86/tdx: Add HLT " Kuppuswamy Sathyanarayanan
2021-08-24 16:10   ` Borislav Petkov
2021-08-24 17:06     ` Sean Christopherson
2021-08-24 17:25       ` Andi Kleen
2021-08-24 17:27       ` Borislav Petkov
2021-08-24 17:47         ` Sean Christopherson
2021-08-24 17:50           ` Borislav Petkov
2021-08-31 20:49         ` Kuppuswamy, Sathyanarayanan
2021-09-01  7:42           ` Borislav Petkov
2021-08-24 18:18       ` Kuppuswamy, Sathyanarayanan
2021-08-24 18:28         ` Andi Kleen
2021-08-24 17:35     ` Kuppuswamy, Sathyanarayanan
2021-08-24 17:48       ` Borislav Petkov
2021-08-04 18:13 ` [PATCH v5 09/12] x86/tdx: Wire up KVM hypercalls Kuppuswamy Sathyanarayanan
2021-08-24 16:34   ` Borislav Petkov
2021-08-24 18:11     ` Kuppuswamy, Sathyanarayanan
2021-08-24 18:29       ` Borislav Petkov
2021-08-24 19:11         ` Kuppuswamy, Sathyanarayanan
2021-08-24 19:39           ` Borislav Petkov
2021-08-04 18:13 ` [PATCH v5 10/12] x86/tdx: Add MSR support for TDX guest Kuppuswamy Sathyanarayanan
2021-08-24 16:55   ` Borislav Petkov
2021-08-24 18:12     ` Kuppuswamy, Sathyanarayanan
2021-08-04 18:13 ` [PATCH v5 11/12] x86/tdx: Don't write CSTAR MSR on Intel Kuppuswamy Sathyanarayanan
2021-08-04 18:31   ` Sean Christopherson
2021-08-04 21:03     ` Kuppuswamy, Sathyanarayanan
2021-08-04 21:44       ` Sean Christopherson
2021-08-04 21:48       ` Dave Hansen
2021-08-04 22:23         ` Kuppuswamy, Sathyanarayanan
2021-08-04 18:13 ` [PATCH v5 12/12] x86/tdx: Handle CPUID via #VE Kuppuswamy Sathyanarayanan
2021-08-24 17:48   ` Borislav Petkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YRTLO0eQOEChETId@zn.tnic \
    --to=bp@alien8.de \
    --cc=ak@linux.intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave.hansen@intel.com \
    --cc=hpa@zytor.com \
    --cc=jgross@suse.com \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=knsathya@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=pv-drivers@vmware.com \
    --cc=sathyanarayanan.kuppuswamy@linux.intel.com \
    --cc=sdeep@vmware.com \
    --cc=seanjc@google.com \
    --cc=tglx@linutronix.de \
    --cc=tony.luck@intel.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).