From: Rob Herring <robh@kernel.org>
To: Samuel Holland <samuel@sholland.org>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-watchdog@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329
Date: Fri, 13 Aug 2021 12:46:49 -0500 [thread overview]
Message-ID: <YRawCZ0BWEzTE4El@robh.at.kernel.org> (raw)
In-Reply-To: <20210805045716.46141-1-samuel@sholland.org>
On Wed, Aug 04, 2021 at 11:57:14PM -0500, Samuel Holland wrote:
> On existing SoCs, the watchdog has a single clock input: HOSC (OSC24M)
> divided by 750. However, starting with R329, LOSC (OSC32k) is added as
> an alternative clock source, with a bit to switch between them.
>
> Since 24 MHz / 750 == 32 kHz, not 32.768 kHz, the hardware adjusts the
> cycle counts to keep the timeouts independent of the clock source. This
> keeps the programming interface backward-compatible.
>
> R329 also adds two new registers, to allow software to immediately drive
> the SoC reset signal.
>
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
> Changes v1 to v2:
> - Switch from enum to const
> - Add descriptions to "clocks" items
>
> .../watchdog/allwinner,sun4i-a10-wdt.yaml | 32 ++++++++++++++++++-
> 1 file changed, 31 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
> index 9aa3c313c49f..8fa5b0d32381 100644
> --- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
> @@ -24,6 +24,7 @@ properties:
> - allwinner,sun50i-a100-wdt
> - allwinner,sun50i-h6-wdt
> - allwinner,sun50i-h616-wdt
> + - allwinner,sun50i-r329-wdt
> - const: allwinner,sun6i-a31-wdt
> - items:
> - const: allwinner,suniv-f1c100s-wdt
> @@ -33,7 +34,18 @@ properties:
> maxItems: 1
>
> clocks:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
> + items:
> + - description: High-frequency oscillator input, divided internally
> + - description: Low-frequency oscillator input, only found on some variants
> +
> + clock-names:
> + minItems: 1
> + maxItems: 2
> + items:
> + - const: hosc
> + - const: losc
>
> interrupts:
> maxItems: 1
> @@ -44,6 +56,24 @@ required:
> - clocks
> - interrupts
>
> +if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - allwinner,sun50i-r329-wdt
> +
> +then:
> + properties:
> + clocks:
> + minItems: 2
> +
> + clock-names:
> + minItems: 2
> +
> + required:
> + - clock-names
Needs an else clause with 'maxItems: 1' or is the 2nd clock now valid
for all?
> +
> unevaluatedProperties: false
>
> examples:
> --
> 2.31.1
>
>
next prev parent reply other threads:[~2021-08-13 17:47 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-05 4:57 [PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329 Samuel Holland
2021-08-05 4:57 ` [PATCH v2 2/3] dt-bindings: watchdog: sunxi: Add compatible for D1 Samuel Holland
2021-08-18 9:07 ` Maxime Ripard
2021-08-28 16:23 ` Guenter Roeck
2021-08-05 4:57 ` [PATCH v2 3/3] watchdog: sunxi_wdt: Add support " Samuel Holland
2021-08-18 9:08 ` Maxime Ripard
2021-08-13 17:46 ` Rob Herring [this message]
2021-08-18 9:07 ` [PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329 Maxime Ripard
2021-08-20 4:04 ` Samuel Holland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YRawCZ0BWEzTE4El@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mripard@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).