From: Wolfram Sang <wsa@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
Peter Rosin <peda@axentia.se>,
Bartosz Golaszewski <brgl@bgdev.pl>
Subject: [PULL REQUEST] i2c for v5.15
Date: Mon, 30 Aug 2021 21:32:34 +0200 [thread overview]
Message-ID: <YS0yUtFCdybL+A43@kunai> (raw)
[-- Attachment #1: Type: text/plain, Size: 5585 bytes --]
Linus,
I2C has a smaller pull reuest this time:
* new driver for I2C virtio
* removal of PMC SMP driver because platform is already gone
* IRQ probing and DMAENGINE API cleanups
* add SI metric prefix definitions to units.h
* beginning of i801 refactorization
* a few driver improvements
linux-next had trivial merge conflicts for
include/uapi/linux/virtio_ids.h and include/linux/units.h. The fixes
from Stephen were correct.
Please pull.
Thanks,
Wolfram
The following changes since commit ff1176468d368232b684f75e82563369208bc371:
Linux 5.14-rc3 (2021-07-25 15:35:14 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-mergewindow
for you to fetch changes up to 8b51a8e64443b95fb9fec9f76f1c93777b35310a:
i2c: cadence: Implement save restore (2021-08-25 23:07:05 +0200)
----------------------------------------------------------------
Andy Shevchenko (6):
i2c: parport: Switch to use module_parport_driver()
units: Add SI metric prefix definitions
i2c: designware: Use DIV_ROUND_CLOSEST() macro
i2c: designware: Fix indentation in the header
i2c: dev: Define pr_fmt() and drop duplication substrings
i2c: dev: Use sysfs_emit() in "show" functions
Claudiu Beznea (1):
i2c: at91: remove #define CONFIG_PM
Heiner Kallweit (4):
i2c: i801: Fix handling SMBHSTCNT_PEC_EN
i2c: i801: Improve disabling runtime pm
i2c: i801: make p2sb_spinlock a mutex
i2c: i801: Remove not needed debug message
Jie Deng (1):
i2c: virtio: add a virtio i2c frontend driver
Len Baker (1):
i2c: sun6i-pw2i: Prefer strscpy over strlcpy
Lukas Bulwahn (1):
i2c: remove dead PMC MSP TWI/SMBus/I2C driver
Sergey Shtylyov (7):
i2c: highlander: add IRQ check
i2c: synquacer: fix deferred probing
i2c: iop3xx: fix deferred probing
i2c: s3c2410: fix IRQ check
i2c: hix5hd2: fix IRQ check
i2c: mt65xx: fix IRQ check
i2c: xlp9xx: fix main IRQ check
Shubhrajyoti Datta (1):
i2c: cadence: Implement save restore
Wolfram Sang (6):
i2c: at91-master: : use proper DMAENGINE API for termination
i2c: imx: : use proper DMAENGINE API for termination
i2c: mxs: : use proper DMAENGINE API for termination
i2c: qup: : use proper DMAENGINE API for termination
i2c: sh_mobile: : use proper DMAENGINE API for termination
i2c: at91: mark PM ops as __maybe unused
with much appreciated quality assurance from
----------------------------------------------------------------
Codrin Ciubotariu (3):
(Rev.) i2c: at91: mark PM ops as __maybe unused
(Rev.) i2c: at91-master: : use proper DMAENGINE API for termination
(Rev.) i2c: at91: remove #define CONFIG_PM
George Cherian (1):
(Rev.) i2c: xlp9xx: fix main IRQ check
Jean Delvare (6):
(Rev.) i2c: parport: Switch to use module_parport_driver()
(Rev.) i2c: i801: Remove not needed debug message
(Test) i2c: i801: Remove not needed debug message
(Rev.) i2c: i801: make p2sb_spinlock a mutex
(Rev.) i2c: i801: Improve disabling runtime pm
(Test) i2c: i801: Fix handling SMBHSTCNT_PEC_EN
Krzysztof Kozlowski (1):
(Rev.) i2c: s3c2410: fix IRQ check
Mika Westerberg (1):
(Rev.) i2c: i801: make p2sb_spinlock a mutex
Oleksij Rempel (1):
(Rev.) i2c: imx: : use proper DMAENGINE API for termination
Qii Wang (1):
(Rev.) i2c: mt65xx: fix IRQ check
Viresh Kumar (2):
(Rev.) i2c: virtio: add a virtio i2c frontend driver
(Test) i2c: virtio: add a virtio i2c frontend driver
MAINTAINERS | 9 +
drivers/i2c/busses/Kconfig | 20 +-
drivers/i2c/busses/Makefile | 2 +-
drivers/i2c/busses/i2c-at91-core.c | 19 +-
drivers/i2c/busses/i2c-at91-master.c | 4 +-
drivers/i2c/busses/i2c-cadence.c | 38 +-
drivers/i2c/busses/i2c-designware-common.c | 8 +-
drivers/i2c/busses/i2c-designware-core.h | 4 +-
drivers/i2c/busses/i2c-designware-platdrv.c | 5 +-
drivers/i2c/busses/i2c-highlander.c | 2 +-
drivers/i2c/busses/i2c-hix5hd2.c | 2 +-
drivers/i2c/busses/i2c-i801.c | 46 +--
drivers/i2c/busses/i2c-imx.c | 6 +-
drivers/i2c/busses/i2c-iop3xx.c | 6 +-
drivers/i2c/busses/i2c-mt65xx.c | 2 +-
drivers/i2c/busses/i2c-mxs.c | 4 +-
drivers/i2c/busses/i2c-parport.c | 36 +-
drivers/i2c/busses/i2c-pmcmsp.c | 600 ----------------------------
drivers/i2c/busses/i2c-qup.c | 2 +-
drivers/i2c/busses/i2c-s3c2410.c | 2 +-
drivers/i2c/busses/i2c-sh_mobile.c | 4 +-
drivers/i2c/busses/i2c-sun6i-p2wi.c | 2 +-
drivers/i2c/busses/i2c-synquacer.c | 2 +-
drivers/i2c/busses/i2c-virtio.c | 290 ++++++++++++++
drivers/i2c/busses/i2c-xlp9xx.c | 2 +-
drivers/i2c/i2c-dev.c | 22 +-
include/linux/units.h | 16 +
include/uapi/linux/virtio_i2c.h | 41 ++
include/uapi/linux/virtio_ids.h | 1 +
29 files changed, 467 insertions(+), 730 deletions(-)
delete mode 100644 drivers/i2c/busses/i2c-pmcmsp.c
create mode 100644 drivers/i2c/busses/i2c-virtio.c
create mode 100644 include/uapi/linux/virtio_i2c.h
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next reply other threads:[~2021-08-30 19:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-30 19:32 Wolfram Sang [this message]
2021-08-31 21:48 ` [PULL REQUEST] i2c for v5.15 pr-tracker-bot
2021-10-09 19:49 Wolfram Sang
2021-10-09 22:05 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YS0yUtFCdybL+A43@kunai \
--to=wsa@kernel.org \
--cc=brgl@bgdev.pl \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peda@axentia.se \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).