linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Lunn <andrew@lunn.ch>
To: Vladimir Oltean <olteanv@gmail.com>
Cc: Saravana Kannan <saravanak@google.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>, Len Brown <lenb@kernel.org>,
	Alvin Sipraga <ALSI@bang-olufsen.dk>,
	kernel-team@android.com, linux-kernel@vger.kernel.org,
	netdev@vger.kernel.org, linux-acpi@vger.kernel.org
Subject: Re: [PATCH v1 1/2] driver core: fw_devlink: Add support for FWNODE_FLAG_BROKEN_PARENT
Date: Wed, 1 Sep 2021 01:27:18 +0200	[thread overview]
Message-ID: <YS661l5gIi3wcpHc@lunn.ch> (raw)
In-Reply-To: <20210831231804.zozyenear45ljemd@skbuf>

On Wed, Sep 01, 2021 at 02:18:04AM +0300, Vladimir Oltean wrote:
> On Wed, Sep 01, 2021 at 01:02:09AM +0200, Andrew Lunn wrote:
> > Rev B is interesting because switch0 and switch1 got genphy, while
> > switch2 got the correct Marvell PHY driver. switch2 PHYs don't have
> > interrupt properties, so don't loop back to their parent device.
> 
> This is interesting and not what I really expected to happen. It goes to
> show that we really need more time to understand all the subtleties of
> device dependencies before jumping on patching stuff.

Here is the log on Rev B with the extra debug prints

Linux version 5.12.0-rc4-00011-gea718c699055-dirty (andrew@lenovo) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binu
tils for Debian) 2.37) #20 Tue Aug 31 18:06:09 CDT 2021
CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt: Machine model: ZII VF610 Development Board, Rev B
printk: bootconsole [earlycon0] enabled
Memory policy: Data cache writeback
Zone ranges:
  Normal   [mem 0x0000000080000000-0x000000009fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000080000000-0x000000009fffffff]
Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff]
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists, mobility grouping on.  Total pages: 130048
Kernel command line: root=/dev/nfs nfsroot=10.0.0.1:/srv/nfsroot/zii_devel_b,nfsvers=3,tcp ip=dhcp rw earlyprintk
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 508204K/524288K available (7168K kernel code, 931K rwdata, 1644K rodata, 1024K init, 250K bss, 16084K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
ftrace: allocating 25455 entries in 50 pages
ftrace: allocated 50 pages with 3 groups
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
L2C-310 erratum 769419 enabled
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x06060000
random: get_random_bytes called from start_kernel+0x32c/0x470 with crng_init=0
sched_clock: 64 bits at 166MHz, resolution 5ns, wraps every 4398046511102ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x2674622ffc, max_idle_ns: 440795203810 ns
Switching to timer-based delay loop, resolution 5ns
Console: colour dummy device 80x30
printk: console [tty0] enabled
printk: bootconsole [earlycon0] disabled
Booting Linux on physical CPU 0x0
Linux version 5.12.0-rc4-00011-gea718c699055-dirty (andrew@lenovo) (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binu
tils for Debian) 2.37) #20 Tue Aug 31 18:06:09 CDT 2021
CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt: Machine model: ZII VF610 Development Board, Rev B
printk: bootconsole [earlycon0] enabled
Memory policy: Data cache writeback
Zone ranges:
  Normal   [mem 0x0000000080000000-0x000000009fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000080000000-0x000000009fffffff]
Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff]
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists, mobility grouping on.  Total pages: 130048
Kernel command line: root=/dev/nfs nfsroot=10.0.0.1:/srv/nfsroot/zii_devel_b,nfsvers=3,tcp ip=dhcp rw earlyprintk
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 508204K/524288K available (7168K kernel code, 931K rwdata, 1644K rodata, 1024K init, 250K bss, 16084K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
ftrace: allocating 25455 entries in 50 pages
ftrace: allocated 50 pages with 3 groups
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
L2C-310 erratum 769419 enabled
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x06060000
random: get_random_bytes called from start_kernel+0x32c/0x470 with crng_init=0
sched_clock: 64 bits at 166MHz, resolution 5ns, wraps every 4398046511102ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x2674622ffc, max_idle_ns: 440795203810 ns
Switching to timer-based delay loop, resolution 5ns
Console: colour dummy device 80x30
printk: console [tty0] enabled
printk: bootconsole [earlycon0] disabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 333.47 BogoMIPS (lpj=1667368)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x80100000 - 0x8010003c
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
platform 40044000.spi: Linked as a consumer to 40048000.iomuxc
platform 4003b000.adc: Linked as a consumer to 40048000.iomuxc
platform 40029000.serial: Linked as a consumer to 40048000.iomuxc
platform 40028000.serial: Linked as a consumer to 40048000.iomuxc
platform 40027000.serial: Linked as a consumer to 40048000.iomuxc
platform 40066000.i2c: Linked as a consumer to 4004a000.gpio
platform 40066000.i2c: Linked as a consumer to 40048000.iomuxc
platform 40066000.i2c: Linked as a sync state only consumer to 4004c000.gpio
platform 40067000.i2c: Linked as a consumer to 40048000.iomuxc
platform 40080000.bus: Linked as a sync state only consumer to 40048000.iomuxc
platform 40080000.bus: Linked as a sync state only consumer to 4004c000.gpio
platform 400b2000.esdhc: Linked as a consumer to 40048000.iomuxc
platform 400d0000.ethernet: Linked as a consumer to 40048000.iomuxc
platform 400d1000.ethernet: Linked as a consumer to 40048000.iomuxc
platform 400e6000.i2c: Linked as a consumer to 40048000.iomuxc
platform 400e6000.i2c: Linked as a sync state only consumer to 4004c000.gpio
platform gpio-leds: Linked as a consumer to 40048000.iomuxc
platform gpio-leds: Linked as a sync state only consumer to 4004b000.gpio
platform 4003b000.adc: Linked as a consumer to regulator-vcc-3v3-mcu
platform 40034000.usb: Linked as a consumer to regulator-usb0-vbus
platform regulator-usb0-vbus: Linked as a consumer to 40049000.gpio
platform regulator-usb0-vbus: Linked as a consumer to 40048000.iomuxc
platform mdio-mux: Linked as a consumer to 40049000.gpio
platform mdio-mux: Linked as a consumer to 40048000.iomuxc
platform spi0: Linked as a consumer to 4004a000.gpio
platform spi0: Linked as a consumer to 40048000.iomuxc
platform spi0: Linked as a sync state only consumer to 4004d000.gpio
vf610-pinctrl 40048000.iomuxc: initialized IMX pinctrl driver
Kprobes globally optimized
platform regulator-usb0-vbus: probe deferral - supplier 40049000.gpio not ready
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
platform 40066000.i2c: probe deferral - supplier 4004a000.gpio not ready
i2c i2c-0: IMX I2C adapter registered
i2c i2c-0: using dma0chan0 (tx) and dma0chan1 (rx) for DMA transfers
i2c 1-0070: Linked as a consumer to 4004c000.gpio
i2c 1-0070: Linked as a consumer to 40048000.iomuxc
i2c i2c-1: IMX I2C adapter registered
i2c i2c-1: using dma0chan16 (tx) and dma0chan17 (rx) for DMA transfers
imx-i2c 400e6000.i2c: Dropping the link to 4004c000.gpio
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes, linear)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=17 bucket_order=0
io scheduler mq-deadline registered
io scheduler kyber registered
40027000.serial: ttyLP0 at MMIO 0x40027000 (irq = 19, base_baud = 5210526) is a FSL_LPUART
printk: console [ttyLP0] enabled
40028000.serial: ttyLP1 at MMIO 0x40028000 (irq = 20, base_baud = 5210526) is a FSL_LPUART
40029000.serial: ttyLP2 at MMIO 0x40029000 (irq = 21, base_baud = 5210526) is a FSL_LPUART
brd: module loaded
spi-nor spi0.0: mt25ql02g (262144 Kbytes)
spi-nor spi0.2: mt25ql02g (262144 Kbytes)
libphy: Fixed MDIO Bus: probed
libphy: fec_enet_mii_bus: probed
fec 400d1000.ethernet: Invalid MAC address: 00:00:00:00:00:00
fec 400d1000.ethernet: Using random MAC address: 1a:09:76:4a:0d:49
libphy: fec_enet_mii_bus: probed
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-platform: EHCI generic platform driver
usbcore: registered new interface driver usb-storage
platform 40034000.usb: probe deferral - supplier regulator-usb0-vbus not ready
snvs_rtc 400a7000.snvs:snvs-rtc-lp: registered as rtc0
snvs_rtc 400a7000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01T00:00:00 UTC (0)
i2c /dev entries driver
at24 2-0050: supply vcc not found, using dummy regulator
at24 2-0050: Linked as a consumer to regulator.0
at24 2-0050: Dropping the link to regulator.0
i2c i2c-1: Added multiplexed i2c bus 2
at24 3-0050: supply vcc not found, using dummy regulator
at24 3-0050: Linked as a consumer to regulator.0
at24 3-0050: Dropping the link to regulator.0
i2c i2c-1: Added multiplexed i2c bus 3
at24 4-0050: supply vcc not found, using dummy regulator
at24 4-0050: Linked as a consumer to regulator.0
at24 4-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write
i2c i2c-1: Added multiplexed i2c bus 4
at24 5-0050: supply vcc not found, using dummy regulator
at24 5-0050: Linked as a consumer to regulator.0
at24 5-0050: 256 byte 24c02 EEPROM, writable, 1 bytes/write
i2c i2c-1: Added multiplexed i2c bus 5
i2c i2c-1: Added multiplexed i2c bus 6
i2c i2c-1: Added multiplexed i2c bus 7
i2c i2c-1: Added multiplexed i2c bus 8
i2c i2c-1: Added multiplexed i2c bus 9
pca954x 1-0070: registered 8 multiplexed busses for I2C switch pca9548
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
leds-gpio gpio-leds: Dropping the link to 4004b000.gpio
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
vf610-adc 4003b000.adc: Linked as a consumer to regulator.1
NET: Registered protocol family 17
mmc0: SDHCI controller on 400b2000.esdhc [400b2000.esdhc] using ADMA
lm75 10-0048: supply vs not found, using dummy regulator
lm75 10-0048: Linked as a consumer to regulator.0
lm75 10-0048: hwmon0: sensor 'lm75'
at24 10-0050: supply vcc not found, using dummy regulator
at24 10-0050: Linked as a consumer to regulator.0
at24 10-0050: 512 byte 24c04 EEPROM, writable, 1 bytes/write
at24 10-0052: supply vcc not found, using dummy regulator
at24 10-0052: Linked as a consumer to regulator.0
at24 10-0052: 512 byte 24c04 EEPROM, writable, 1 bytes/write
pca953x 10-0020: supply vcc not found, using dummy regulator
pca953x 10-0020: Linked as a consumer to regulator.0
pca953x 10-0020: using no AI
platform mdio-mux: Linked as a sync state only consumer to 10-0022
i2c 10-0022: Linked as a consumer to 4004c000.gpio
i2c 10-0022: Linked as a consumer to 40048000.iomuxc
pca953x 10-0022: supply vcc not found, using dummy regulator
pca953x 10-0022: Linked as a consumer to regulator.0
pca953x 10-0022: using no AI
pca953x 10-0022: interrupt support not compiled in
i2c i2c-10: IMX I2C adapter registered
i2c i2c-10: using dma0chan2 (tx) and dma0chan3 (rx) for DMA transfers
imx-i2c 40066000.i2c: Dropping the link to 4004c000.gpio
mdio_bus 0.1: Linked as a sync state only consumer to 40049000.gpio
mdio_bus 0.1: Linked as a sync state only consumer to 40048000.iomuxc
libphy: mdio_mux: probed
mdio_bus 0.1:00: Linked as a consumer to 40049000.gpio
mdio_bus 0.1:00: Linked as a consumer to 40048000.iomuxc
mdio_bus 0.1:00: Linked as a sync state only consumer to 0.1:00
mv88e6085 0.1:00: switch 0x3520 detected: Marvell 88E6352, revision 1
mdio_bus !mdio-mux!mdio@1!switch@0!mdio: Linked as a sync state only consumer to 0.1:00
libphy: mdio: probed
mmc0: host does not support reading read-only switch, assuming write-enable
mmc0: new high speed SDHC card at address 0007
mdio_bus !mdio-mux!mdio@1!switch@0!mdio:00: Linked as a consumer to 0.1:00
mdio_bus !mdio-mux!mdio@1!switch@0!mdio:00: probe deferral - supplier 0.1:00 not ready
mmcblk0: mmc0:0007 SD4GB 3.71 GiB 
mdio_bus !mdio-mux!mdio@1!switch@0!mdio:01: Linked as a consumer to 0.1:00
mdio_bus !mdio-mux!mdio@1!switch@0!mdio:01: probe deferral - supplier 0.1:00 not ready
 mmcblk0: p1 p2 p3 < p5 >
mdio_bus !mdio-mux!mdio@1!switch@0!mdio:02: Linked as a consumer to 0.1:00
mdio_bus !mdio-mux!mdio@1!switch@0!mdio:02: probe deferral - supplier 0.1:00 not ready
mv88e6085 0.1:00: Dropping the link to 0.1:00
mdio_bus 0.2: Linked as a sync state only consumer to 40049000.gpio
mdio_bus 0.2: Linked as a sync state only consumer to 40048000.iomuxc
libphy: mdio_mux: probed
mdio_bus 0.2:00: Linked as a consumer to 40049000.gpio
mdio_bus 0.2:00: Linked as a consumer to 40048000.iomuxc
mdio_bus 0.2:00: Linked as a sync state only consumer to 0.2:00
mv88e6085 0.2:00: switch 0x3520 detected: Marvell 88E6352, revision 1
mdio_bus !mdio-mux!mdio@2!switch@0!mdio: Linked as a sync state only consumer to 0.2:00
libphy: mdio: probed
mdio_bus !mdio-mux!mdio@2!switch@0!mdio:00: Linked as a consumer to 0.2:00
mdio_bus !mdio-mux!mdio@2!switch@0!mdio:00: probe deferral - supplier 0.2:00 not ready
mdio_bus !mdio-mux!mdio@2!switch@0!mdio:01: Linked as a consumer to 0.2:00
mdio_bus !mdio-mux!mdio@2!switch@0!mdio:01: probe deferral - supplier 0.2:00 not ready
mdio_bus !mdio-mux!mdio@2!switch@0!mdio:02: Linked as a consumer to 0.2:00
mdio_bus !mdio-mux!mdio@2!switch@0!mdio:02: probe deferral - supplier 0.2:00 not ready
mv88e6085 0.2:00: Dropping the link to 0.2:00
mdio_bus 0.4: Linked as a sync state only consumer to 10-0022
libphy: mdio_mux: probed
mdio_bus 0.4:00: Linked as a sync state only consumer to 10-0022
mv88e6085 0.4:00: switch 0x1a70 detected: Marvell 88E6185, revision 2
libphy: mdio: probed
mv88e6085 0.1:00 lan0 (uninitialized): PHY [!mdio-mux!mdio@1!switch@0!mdio:00] driver [Generic PHY] (irq=POLL)
mv88e6085 0.1:00 lan1 (uninitialized): PHY [!mdio-mux!mdio@1!switch@0!mdio:01] driver [Generic PHY] (irq=POLL)
mv88e6085 0.1:00 lan2 (uninitialized): PHY [!mdio-mux!mdio@1!switch@0!mdio:02] driver [Generic PHY] (irq=POLL)
mv88e6085 0.1:00: configuring for fixed/rgmii-txid link mode
mv88e6085 0.1:00: configuring for fixed/ link mode
mv88e6085 0.1:00: Link is Up - 1Gbps/Full - flow control off
mv88e6085 0.1:00: Link is Up - 100Mbps/Full - flow control off
mv88e6085 0.2:00 lan3 (uninitialized): PHY [!mdio-mux!mdio@2!switch@0!mdio:00] driver [Generic PHY] (irq=POLL)
mv88e6085 0.2:00 lan4 (uninitialized): PHY [!mdio-mux!mdio@2!switch@0!mdio:01] driver [Generic PHY] (irq=POLL)
mv88e6085 0.2:00 lan5 (uninitialized): PHY [!mdio-mux!mdio@2!switch@0!mdio:02] driver [Generic PHY] (irq=POLL)
mv88e6085 0.2:00: configuring for fixed/rgmii-txid link mode
mv88e6085 0.2:00: configuring for fixed/rgmii-txid link mode
mv88e6085 0.4:00 lan6 (uninitialized): PHY [!mdio-mux!mdio@4!switch@0!mdio:00] driver [Marvell 88E1545] (irq=POLL)
mv88e6085 0.4:00 lan7 (uninitialized): PHY [!mdio-mux!mdio@4!switch@0!mdio:01] driver [Marvell 88E1545] (irq=POLL)
mv88e6085 0.4:00 lan8 (uninitialized): PHY [!mdio-mux!mdio@4!switch@0!mdio:02] driver [Marvell 88E1545] (irq=POLL)
mv88e6085 0.4:00: configuring for fixed/rgmii-txid link mode
mv88e6085 0.1:00: Linked as a consumer to 400d1000.ethernet
DSA: tree 0 setup
mv88e6085 0.4:00: Dropping the link to 10-0022
libphy: mdio_mux: probed
mdio-mux-gpio mdio-mux: Dropping the link to 10-0022

      Andrew

  reply	other threads:[~2021-08-31 23:27 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-26  7:45 [PATCH v1 0/2] Fix rtl8366rb issues with fw_devlink=on Saravana Kannan
2021-08-26  7:45 ` [PATCH v1 1/2] driver core: fw_devlink: Add support for FWNODE_FLAG_BROKEN_PARENT Saravana Kannan
2021-08-26 13:13   ` Andrew Lunn
2021-08-26 19:56     ` Saravana Kannan
2021-08-26 20:53       ` Andrew Lunn
2021-08-26 23:44         ` Saravana Kannan
2021-08-27  1:23           ` Andrew Lunn
2021-08-27  4:02             ` Saravana Kannan
2021-08-27 13:44               ` Andrew Lunn
2021-08-27 18:06                 ` Saravana Kannan
2021-08-27 20:11                   ` Andrew Lunn
2021-08-27 21:33                     ` Saravana Kannan
2021-08-28 17:01                       ` Andrew Lunn
2021-08-30 19:03                         ` Saravana Kannan
2021-08-31 13:16                           ` Andrew Lunn
2021-08-31 19:26                             ` Saravana Kannan
2021-08-31 22:05                               ` Andrew Lunn
2021-08-31 22:18                                 ` Saravana Kannan
2021-08-31 23:02                                   ` Andrew Lunn
2021-08-31 23:18                                     ` Vladimir Oltean
2021-08-31 23:27                                       ` Andrew Lunn [this message]
2021-09-01  1:28                                       ` Vladimir Oltean
2021-09-01  1:38                                         ` Vladimir Oltean
2021-09-01  2:19                                           ` Saravana Kannan
2021-09-01  9:02                                             ` Vladimir Oltean
2021-09-01 22:57                                               ` Saravana Kannan
2021-09-01  2:00                                       ` Saravana Kannan
2021-09-01  8:46                                         ` Vladimir Oltean
2021-09-01 22:53                                           ` Saravana Kannan
2021-09-02 17:41                                           ` Andrew Lunn
2021-09-02 17:58                                             ` Saravana Kannan
2021-09-30  5:33                                       ` Saravana Kannan
2021-09-30 13:15                                         ` Andrew Lunn
2021-09-30 13:43                                         ` Vladimir Oltean
2021-09-30 14:00                                           ` Andrew Lunn
2021-09-30 17:31                                             ` Saravana Kannan
2021-09-30 19:38                                               ` Andrew Lunn
2021-09-30 19:48                                                 ` Saravana Kannan
2021-09-30 20:06                                                   ` Florian Fainelli
2021-09-30 20:14                                                     ` Saravana Kannan
2021-09-30 21:16                                                       ` Florian Fainelli
2021-09-30 20:22                                                     ` Andrew Lunn
2021-09-01  1:46                                     ` Saravana Kannan
2021-08-31 23:18                                   ` Andrew Lunn
2021-09-08 18:35                             ` Saravana Kannan
2021-09-09  1:39                           ` Andrew Lunn
2021-09-09  3:21                             ` Saravana Kannan
2021-09-09 10:38                               ` Vladimir Oltean
2021-09-09 15:00                               ` Andrew Lunn
2021-09-09 16:56                             ` Florian Fainelli
2021-08-26  7:45 ` [PATCH v1 2/2] net: dsa: rtl8366rb: Quick fix to work with fw_devlink=on Saravana Kannan
2021-08-26  7:55   ` Greg Kroah-Hartman
2021-08-26 11:25   ` Florian Fainelli
2021-08-26 17:29     ` Saravana Kannan
2021-08-26 11:29   ` Alvin Šipraga
2021-08-26 17:26     ` Saravana Kannan
2021-08-26 18:04       ` Alvin Šipraga

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YS661l5gIi3wcpHc@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=ALSI@bang-olufsen.dk \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kernel-team@android.com \
    --cc=kuba@kernel.org \
    --cc=lenb@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=rafael@kernel.org \
    --cc=saravanak@google.com \
    --cc=vivien.didelot@gmail.com \
    --subject='Re: [PATCH v1 1/2] driver core: fw_devlink: Add support for FWNODE_FLAG_BROKEN_PARENT' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).