linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Heiko Stuebner <heiko@sntech.de>,
	linux-rockchip@lists.infradead.org, alsa-devel@alsa-project.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/4] dt-bindings: sound: add rockchip i2s-tdm binding
Date: Tue, 31 Aug 2021 16:50:22 -0500	[thread overview]
Message-ID: <YS6kHkeOKCJMOOIf@robh.at.kernel.org> (raw)
In-Reply-To: <20210828140205.21973-3-frattaroli.nicolas@gmail.com>

On Sat, Aug 28, 2021 at 04:02:02PM +0200, Nicolas Frattaroli wrote:
> This adds the YAML bindings for the Rockchip I2S/TDM audio driver.
> 
> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
> ---
>  .../bindings/sound/rockchip,i2s-tdm.yaml      | 218 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 219 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
> new file mode 100644
> index 000000000000..ab8731779805
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
> @@ -0,0 +1,218 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/rockchip,i2s-tdm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip I2S/TDM Controller
> +
> +description:
> +  The Rockchip I2S/TDM Controller is a Time Division Multiplexed
> +  audio interface found in various Rockchip SoCs, allowing up
> +  to 8 channels of audio over a serial interface.
> +
> +maintainers:
> +  - Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - rockchip,px30-i2s-tdm
> +      - rockchip,rk1808-i2s-tdm
> +      - rockchip,rk3308-i2s-tdm
> +      - rockchip,rk3568-i2s-tdm
> +      - rockchip,rv1126-i2s-tdm
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  dmas:
> +    minItems: 1
> +    maxItems: 2
> +
> +  dma-names:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      enum:
> +        - rx
> +        - tx
> +
> +  clocks:
> +    minItems: 3
> +    items:
> +      - description: clock for TX
> +      - description: clock for RX
> +      - description: AHB clock driving the interface
> +      - description:
> +          Parent clock for mclk_tx (only required when using mclk-calibrate)
> +      - description:
> +          Parent clock for mclk_rx (only required when using mclk-calibrate)
> +      - description:
> +          Clock for sample rates that are an integer multiple of 8000
> +          (only required when using mclk-calibrate)
> +      - description:
> +          Clock for sample rates that are an integer multiple of 11025
> +          (only required when using mclk-calibrate)
> +
> +  clock-names:
> +    minItems: 3
> +    items:
> +      - const: mclk_tx
> +      - const: mclk_rx
> +      - const: hclk
> +      - const: mclk_tx_src
> +      - const: mclk_rx_src
> +      - const: mclk_root0
> +      - const: mclk_root1
> +
> +  rockchip,frame-width:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    default: 64
> +    minimum: 32
> +    maximum: 512
> +    description:
> +      Width of a frame, usually slot width multiplied by number of slots.
> +      Must be even.
> +
> +  resets:
> +    items:
> +      - description: reset for TX
> +      - description: reset for RX
> +
> +  reset-names:
> +    items:
> +      - const: tx-m
> +      - const: rx-m
> +
> +  rockchip,cru:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      The phandle of the cru.
> +      Required if neither trcm-sync-tx-only nor trcm-sync-rx-only are specified.
> +
> +  rockchip,grf:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      The phandle of the syscon node for the GRF register.
> +
> +  rockchip,mclk-calibrate:
> +    description:
> +      Switch between two root clocks depending on the audio sample rate.
> +      For integer multiples of 8000 (e.g. 48000 Hz), mclk_root0 is used.
> +      For integer multiples of 11025 (e.g. 44100 Hz), mclk_root1 is used.
> +    type: boolean
> +
> +  rockchip,trcm-sync-tx-only:
> +    type: boolean
> +    description: Use TX BCLK/LRCK for both TX and RX.
> +
> +  rockchip,trcm-sync-rx-only:
> +    type: boolean
> +    description: Use RX BCLK/LRCK for both TX and RX.
> +
> +  "#sound-dai-cells":
> +    const: 0
> +
> +  rockchip,i2s-rx-route:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description:
> +      Defines the mapping of I2S RX sdis to I2S data bus lines.
> +      By default, they are mapped one-to-one.
> +    items:
> +      - description: which sdi to connect to data line 0
> +      - description: which sdi to connect to data line 1
> +      - description: which sdi to connect to data line 2
> +      - description: which sdi to connect to data line 3

This would be better expressed as:

maxItems: 4
items:
  enum: [ 0, 1, 2, 3 ]

(I'm guessing on the allowed values here)

> +
> +  rockchip,i2s-tx-route:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description:
> +      Defines the mapping of I2S TX sdos to I2S data bus lines.
> +      By default, they are mapped one-to-one.
> +    items:
> +      - description: which sdo to connect to data line 0
> +      - description: which sdo to connect to data line 1
> +      - description: which sdo to connect to data line 2
> +      - description: which sdo to connect to data line 3

Same here.

> +
> +  rockchip,tdm-fsync-half-frame:
> +    description: Whether to use half frame fsync.
> +    type: boolean
> +
> +  rockchip,io-multiplex:
> +    description:
> +      Specify that the GPIO lines on the I2S bus are multiplexed such that
> +      the direction (input/output) needs to be dynamically adjusted.
> +    type: boolean
> +
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - dmas
> +  - dma-names
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - rockchip,grf
> +  - "#sound-dai-cells"
> +
> +allOf:
> +  - if:
> +      properties:
> +        rockchip,trcm-sync-tx-only: false
> +        rockchip,trcm-sync-rx-only: false
> +    then:
> +      required:
> +        - rockchip,cru
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/rk3568-cru.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/pinctrl/rockchip.h>
> +
> +    foo {

bus {

> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +        i2s@fe410000 {
> +            compatible = "rockchip,rk3568-i2s-tdm";
> +            reg = <0x0 0xfe410000 0x0 0x1000>;
> +            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
> +            clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>,
> +                     <&cru HCLK_I2S1_8CH>;
> +            clock-names = "mclk_tx", "mclk_rx", "hclk";
> +            dmas = <&dmac1 3>, <&dmac1 2>;
> +            dma-names = "rx", "tx";
> +            resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>;
> +            reset-names = "tx-m", "rx-m";
> +            rockchip,trcm-sync-tx-only;
> +            rockchip,cru = <&cru>;
> +            rockchip,grf = <&grf>;
> +            #sound-dai-cells = <0>;
> +            pinctrl-names = "default";
> +            pinctrl-0 =
> +                <&i2s1m0_sclktx
> +                &i2s1m0_sclkrx
> +                &i2s1m0_lrcktx
> +                &i2s1m0_lrckrx
> +                &i2s1m0_sdi0
> +                &i2s1m0_sdi1
> +                &i2s1m0_sdi2
> +                &i2s1m0_sdi3
> +                &i2s1m0_sdo0
> +                &i2s1m0_sdo1
> +                &i2s1m0_sdo2
> +                &i2s1m0_sdo3>;
> +            status = "okay";

Still needs to be dropped.

> +        };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5d459d42672c..d2be16a85009 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16053,6 +16053,7 @@ ROCKCHIP I2S TDM DRIVER
>  M:	Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
>  L:	linux-rockchip@lists.infradead.org
>  S:	Maintained
> +F:	Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
>  F:	sound/soc/rockchip/rockchip_i2s_tdm.*
>  
>  ROCKCHIP ISP V1 DRIVER
> -- 
> 2.33.0
> 
> 

  reply	other threads:[~2021-08-31 21:50 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-28 14:02 [PATCH v3 0/4] Rockchip I2S/TDM controller Nicolas Frattaroli
2021-08-28 14:02 ` [PATCH v3 1/4] ASoC: rockchip: add support for i2s-tdm controller Nicolas Frattaroli
2021-08-28 14:02 ` [PATCH v3 2/4] dt-bindings: sound: add rockchip i2s-tdm binding Nicolas Frattaroli
2021-08-31 21:50   ` Rob Herring [this message]
2021-08-28 14:02 ` [PATCH v3 3/4] arm64: dts: rockchip: add i2s1 on rk356x Nicolas Frattaroli
2021-08-28 14:02 ` [PATCH v3 4/4] arm64: dts: rockchip: add analog audio on Quartz64 Nicolas Frattaroli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YS6kHkeOKCJMOOIf@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=frattaroli.nicolas@gmail.com \
    --cc=heiko@sntech.de \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).