From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Maulik Shah <mkshah@codeaurora.org>
Cc: swboyd@chromium.org, mka@chromium.org, evgreen@chromium.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
agross@kernel.org, dianders@chromium.org, linux@roeck-us.net,
rnayak@codeaurora.org, lsrao@codeaurora.org,
Mahesh Sivasubramanian <msivasub@codeaurora.org>,
Lina Iyer <ilina@codeaurora.org>
Subject: Re: [PATCH v9 2/5] soc: qcom: Add SoC sleep stats driver
Date: Fri, 24 Sep 2021 18:20:50 -0500 [thread overview]
Message-ID: <YU5dUlscQzGXloKc@builder.lan> (raw)
In-Reply-To: <1630906083-32194-3-git-send-email-mkshah@codeaurora.org>
On Mon 06 Sep 00:28 CDT 2021, Maulik Shah wrote:
> From: Mahesh Sivasubramanian <msivasub@codeaurora.org>
>
> Let's add a driver to read the stats from remote processor and
> export to debugfs.
>
> The driver creates "qcom_sleep_stats" directory in debugfs and
> adds files for various low power mode available. Below is sample
> output with command
>
> cat /sys/kernel/debug/qcom_sleep_stats/ddr
> count = 0
> Last Entered At = 0
> Last Exited At = 0
> Accumulated Duration = 0
>
> Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
> Signed-off-by: Lina Iyer <ilina@codeaurora.org>
> [mkshah: add subsystem sleep stats, create one file for each stat]
> Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
> ---
> drivers/soc/qcom/Kconfig | 10 ++
> drivers/soc/qcom/Makefile | 1 +
> drivers/soc/qcom/soc_sleep_stats.c | 241 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 252 insertions(+)
> create mode 100644 drivers/soc/qcom/soc_sleep_stats.c
>
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index 79b568f..e80b63a 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -190,6 +190,16 @@ config QCOM_SOCINFO
> Say yes here to support the Qualcomm socinfo driver, providing
> information about the SoC to user space.
>
> +config QCOM_SOC_SLEEP_STATS
> + tristate "Qualcomm Technologies, Inc. (QTI) SoC sleep stats driver"
> + depends on ARCH_QCOM && DEBUG_FS || COMPILE_TEST
> + depends on QCOM_SMEM
> + help
> + Qualcomm Technologies, Inc. (QTI) SoC sleep stats driver to read
> + the shared memory exported by the remote processor related to
> + various SoC level low power modes statistics and export to debugfs
> + interface.
> +
> config QCOM_WCNSS_CTRL
> tristate "Qualcomm WCNSS control driver"
> depends on ARCH_QCOM || COMPILE_TEST
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index ad675a6..5f30d74 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
> obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
> obj-$(CONFIG_QCOM_SMSM) += smsm.o
> obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o
> +obj-$(CONFIG_QCOM_SOC_SLEEP_STATS) += soc_sleep_stats.o
I know that the rest of the modules here does a bad job and have
completely generic names, but could we rename this "qcom_sleep_stats"
instead?
> obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
> obj-$(CONFIG_QCOM_APR) += apr.o
> obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
> diff --git a/drivers/soc/qcom/soc_sleep_stats.c b/drivers/soc/qcom/soc_sleep_stats.c
[..]
> +static int qcom_soc_sleep_stats_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + void __iomem *reg;
> + struct dentry *root;
> + const struct stats_config *config;
> + struct stats_data *d;
> + int i;
> +
> + config = device_get_match_data(&pdev->dev);
> + if (!config)
> + return -ENODEV;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res)
> + return PTR_ERR(res);
You no longer use this "res".
> +
> + reg = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
> + if (!reg)
IS_ERR()
> + return -ENOMEM;
> +
> + d = devm_kcalloc(&pdev->dev, config->num_records,
> + sizeof(*d), GFP_KERNEL);
> + if (!d)
> + return -ENOMEM;
> +
> + for (i = 0; i < config->num_records; i++)
> + d[i].appended_stats_avail = config->appended_stats_avail;
> +
> + root = debugfs_create_dir("qcom_sleep_stats", NULL);
> +
> + qcom_create_subsystem_stat_files(root);
> + qcom_create_soc_sleep_stat_files(root, reg, d, config->num_records);
> +
> + platform_set_drvdata(pdev, root);
> +
> + return 0;
> +}
> +
> +static int qcom_soc_sleep_stats_remove(struct platform_device *pdev)
> +{
> + struct dentry *root = platform_get_drvdata(pdev);
> +
> + debugfs_remove_recursive(root);
> +
> + return 0;
> +}
> +
> +static const struct stats_config rpm_data = {
> + .num_records = 2,
> + .appended_stats_avail = true,
> +};
> +
> +static const struct stats_config rpmh_data = {
> + .num_records = 3,
> + .appended_stats_avail = false,
> +};
> +
> +static const struct of_device_id qcom_soc_sleep_stats_table[] = {
> + { .compatible = "qcom,rpm-sleep-stats", .data = &rpm_data },
> + { .compatible = "qcom,rpmh-sleep-stats", .data = &rpmh_data },
> + { }
> +};
MODULE_DEVICE_TABLE(of, qcom_soc_sleep_stats_table);
Otherwise the module doesn't load automatically.
Regards,
Bjorn
> +
> +static struct platform_driver soc_sleep_stats = {
> + .probe = qcom_soc_sleep_stats_probe,
> + .remove = qcom_soc_sleep_stats_remove,
> + .driver = {
> + .name = "soc_sleep_stats",
> + .of_match_table = qcom_soc_sleep_stats_table,
> + },
> +};
> +module_platform_driver(soc_sleep_stats);
> +
> +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. (QTI) SoC Sleep Stats driver");
> +MODULE_LICENSE("GPL v2");
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
next prev parent reply other threads:[~2021-09-24 23:21 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-06 5:27 [PATCH v9 0/5] Introduce SoC sleep stats driver Maulik Shah
2021-09-06 5:27 ` [PATCH v9 1/5] dt-bindings: Introduce SoC sleep stats bindings Maulik Shah
2021-09-07 19:58 ` Stephen Boyd
2021-09-24 23:23 ` Bjorn Andersson
2021-10-05 8:53 ` Maulik Shah
2021-09-06 5:28 ` [PATCH v9 2/5] soc: qcom: Add SoC sleep stats driver Maulik Shah
2021-09-24 23:20 ` Bjorn Andersson [this message]
2021-10-05 8:56 ` Maulik Shah
2021-09-06 5:28 ` [PATCH v9 3/5] arm64: dts: qcom: sc7180: Enable SoC sleep stats Maulik Shah
2021-09-06 5:28 ` [PATCH v9 4/5] arm64: defconfig: Enable SoC sleep stats driver Maulik Shah
2021-09-06 5:28 ` [PATCH v9 5/5] arm64: dts: qcom: sc7280: Enable SoC sleep stats Maulik Shah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YU5dUlscQzGXloKc@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=ilina@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lsrao@codeaurora.org \
--cc=mka@chromium.org \
--cc=mkshah@codeaurora.org \
--cc=msivasub@codeaurora.org \
--cc=rnayak@codeaurora.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).