linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nathan Chancellor <nathan@kernel.org>
To: Zhenguo Yao <yaozhenguo1@gmail.com>
Cc: mike.kravetz@oracle.com, mpe@ellerman.id.au,
	benh@kernel.crashing.org, paulus@samba.org, corbet@lwn.net,
	rppt@kernel.org, akpm@linux-foundation.org, yaozhenguo@jd.com,
	willy@infradead.org, linux-kernel@vger.kernel.org,
	linux-doc@vger.kernel.org, linux-mm@kvack.org,
	llvm@lists.linux.dev
Subject: Re: [PATCH v7] hugetlbfs: Extend the definition of hugepages parameter to support node allocation
Date: Wed, 29 Sep 2021 12:24:06 -0700	[thread overview]
Message-ID: <YVS9VhrAuKE2YdbF@archlinux-ax161> (raw)
In-Reply-To: <20210927104149.46884-1-yaozhenguo1@gmail.com>

On Mon, Sep 27, 2021 at 06:41:49PM +0800, Zhenguo Yao wrote:
> We can specify the number of hugepages to allocate at boot. But the
> hugepages is balanced in all nodes at present. In some scenarios,
> we only need hugepages in one node. For example: DPDK needs hugepages
> which are in the same node as NIC. if DPDK needs four hugepages of 1G
> size in node1 and system has 16 numa nodes. We must reserve 64 hugepages
> in kernel cmdline. But, only four hugepages are used. The others should
> be free after boot. If the system memory is low(for example: 64G), it will
> be an impossible task. So, Extending hugepages parameter to support
> specifying hugepages at a specific node.
> For example add following parameter:
> 
> hugepagesz=1G hugepages=0:1,1:3
> 
> It will allocate 1 hugepage in node0 and 3 hugepages in node1.
> 
> Signed-off-by: Zhenguo Yao <yaozhenguo1@gmail.com>

<snip>

> diff --git a/mm/hugetlb.c b/mm/hugetlb.c
> index 95dc7b83381f..ca00676a1bdd 100644
> --- a/mm/hugetlb.c
> +++ b/mm/hugetlb.c
> @@ -66,6 +66,7 @@ static struct hstate * __initdata parsed_hstate;
>  static unsigned long __initdata default_hstate_max_huge_pages;
>  static bool __initdata parsed_valid_hugepagesz = true;
>  static bool __initdata parsed_default_hugepagesz;
> +static unsigned int default_hugepages_in_node[MAX_NUMNODES] __initdata;
>  
>  /*
>   * Protects updates to hugepage_freelists, hugepage_activelist, nr_huge_pages,
> @@ -2868,33 +2869,41 @@ struct page *alloc_huge_page(struct vm_area_struct *vma,
>  	return ERR_PTR(-ENOSPC);
>  }
>  
> -int alloc_bootmem_huge_page(struct hstate *h)
> +int alloc_bootmem_huge_page(struct hstate *h, int nid)
>  	__attribute__ ((weak, alias("__alloc_bootmem_huge_page")));
> -int __alloc_bootmem_huge_page(struct hstate *h)
> +int __alloc_bootmem_huge_page(struct hstate *h, int nid)
>  {
>  	struct huge_bootmem_page *m;
>  	int nr_nodes, node;
>  
> +	if (nid >= nr_online_nodes)
> +		return 0;
> +	/* do node specific alloc */
> +	if (nid != NUMA_NO_NODE) {
> +		m = memblock_alloc_try_nid_raw(huge_page_size(h), huge_page_size(h),
> +				0, MEMBLOCK_ALLOC_ACCESSIBLE, nid);
> +		if (m)
> +			goto found;
> +		else
> +			return 0;
> +	}
> +	/* do all node balanced alloc */
>  	for_each_node_mask_to_alloc(h, nr_nodes, node, &node_states[N_MEMORY]) {
> -		void *addr;
> -
> -		addr = memblock_alloc_try_nid_raw(
> +		m = memblock_alloc_try_nid_raw(
>  				huge_page_size(h), huge_page_size(h),
>  				0, MEMBLOCK_ALLOC_ACCESSIBLE, node);
> -		if (addr) {
> -			/*
> -			 * Use the beginning of the huge page to store the
> -			 * huge_bootmem_page struct (until gather_bootmem
> -			 * puts them into the mem_map).
> -			 */
> -			m = addr;
> +		/*
> +		 * Use the beginning of the huge page to store the
> +		 * huge_bootmem_page struct (until gather_bootmem
> +		 * puts them into the mem_map).
> +		 */
> +		if (m)
>  			goto found;
> -		}
> +		else
> +			return 0;
>  	}
> -	return 0;
>  
>  found:
> -	BUG_ON(!IS_ALIGNED(virt_to_phys(m), huge_page_size(h)));
>  	/* Put them into a private list first because mem_map is not up yet */
>  	INIT_LIST_HEAD(&m->list);
>  	list_add(&m->list, &huge_boot_pages);

This hunk causes a clang warning now:

mm/hugetlb.c:2957:33: error: variable 'm' is used uninitialized whenever '&&' condition is false [-Werror,-Wsometimes-uninitialized]
        for_each_node_mask_to_alloc(h, nr_nodes, node, &node_states[N_MEMORY]) {
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mm/hugetlb.c:1254:3: note: expanded from macro 'for_each_node_mask_to_alloc'
                nr_nodes > 0 &&                                         \
                ^~~~~~~~~~~~
mm/hugetlb.c:2974:18: note: uninitialized use occurs here
        INIT_LIST_HEAD(&m->list);
                        ^
mm/hugetlb.c:2957:33: note: remove the '&&' if its condition is always true
        for_each_node_mask_to_alloc(h, nr_nodes, node, &node_states[N_MEMORY]) {
                                       ^
mm/hugetlb.c:2942:29: note: initialize the variable 'm' to silence this warning
        struct huge_bootmem_page *m;
                                   ^
                                    = NULL
1 error generated.

I am not sure if it is possible for nr_nodes to be 0 right out of the
gate so might be a false positive?

Cheers,
Nathan

  parent reply	other threads:[~2021-09-29 19:24 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-27 10:41 [PATCH v7] hugetlbfs: Extend the definition of hugepages parameter to support node allocation Zhenguo Yao
2021-09-28 16:47 ` Mike Rapoport
2021-09-29  5:38   ` Zhenguo Yao
2021-09-29 19:24 ` Nathan Chancellor [this message]
2021-09-29 22:27   ` Mike Rapoport
2021-09-29 23:25     ` Andrew Morton
2021-10-01 22:33 ` Mike Kravetz
2021-10-04 15:06   ` Zhenguo Yao
2021-10-04 17:34     ` Mike Kravetz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YVS9VhrAuKE2YdbF@archlinux-ax161 \
    --to=nathan@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=benh@kernel.crashing.org \
    --cc=corbet@lwn.net \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=llvm@lists.linux.dev \
    --cc=mike.kravetz@oracle.com \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    --cc=rppt@kernel.org \
    --cc=willy@infradead.org \
    --cc=yaozhenguo1@gmail.com \
    --cc=yaozhenguo@jd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).