* Kernel 5.15 doesn't detect SATA drive on boot
@ 2021-11-16 12:44 Yuji Nakao
2021-11-16 23:05 ` Damien Le Moal
0 siblings, 1 reply; 14+ messages in thread
From: Yuji Nakao @ 2021-11-16 12:44 UTC (permalink / raw)
To: linux-kernel; +Cc: damien.lemoal
[-- Attachment #1: Type: text/plain, Size: 1024 bytes --]
Hello,
I'm using Arch Linux on MacBook Air 2010. I updated `linux` package[1]
from v5.14.16 to v5.15.2 the other day, and the boot process stalled
with the following message.
```shell
:: running early hook [udev]
Starting version 249.6-3-arch
:: running hook [udev]
:: Triggering uevents...
Waiting 10 seconds for device /dev/sda3 ...
ERROR: device '/dev/sda3' not found. Skipping fsck.
:: mounting '/dev/sda' on real root
mount: /new_root: no filesystem type specified.
You are now being dropped into an emergency shell.
sh: can't access tty; job control turned off
[rootfs ]#
```
In the emergency shell there's no `sda` devices when I type `$ ls
/dev/`. By downgrading the kernel, boot process works properly.
See also Arch Linux bug tracker[2]. There are similar reports on
Apple devices.
`dmesg` output in the emergency shell is attached. I guess this issue is
related to libata, so CCed to Damien Le Moal.
Regards.
[1] https://archlinux.org/packages/core/x86_64/linux/
[2] https://bugs.archlinux.org/task/72734
[-- Attachment #2: dmesg_output.log --]
[-- Type: text/plain, Size: 49535 bytes --]
[ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.000000] Linux version 5.15.2-arch1-1 (linux@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Fri, 12 Nov 2021 19:22:10 +0000
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/sda3 rw ipv6.disable=1
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] signal: max sigframe size: 1520
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006f000000-0x000000007effffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f000000-0x000000007f718fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f719000-0x000000007f938fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f939000-0x000000007f953fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f954000-0x000000007f96afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f96b000-0x000000007f96dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f96e000-0x000000007f99afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f99b000-0x000000007f9affff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f9b0000-0x000000007f9dafff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f9db000-0x000000007fef8fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fef9000-0x000000007fefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000093200000-0x0000000093200fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x6d43a018-0x6d448c57] usable ==> usable
[ 0.000000] e820: update [mem 0x6d43a018-0x6d448c57] usable ==> usable
[ 0.000000] e820: update [mem 0x6d439018-0x6d439984] usable ==> usable
[ 0.000000] e820: update [mem 0x6d439018-0x6d439984] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000006d439017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006d439018-0x000000006d439984] usable
[ 0.000000] reserve setup_data: [mem 0x000000006d439985-0x000000006d43a017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006d43a018-0x000000006d448c57] usable
[ 0.000000] reserve setup_data: [mem 0x000000006d448c58-0x000000006effffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006f000000-0x000000007effffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007f000000-0x000000007f718fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007f719000-0x000000007f938fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000007f939000-0x000000007f953fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007f954000-0x000000007f96afff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000007f96b000-0x000000007f96dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007f96e000-0x000000007f99afff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007f99b000-0x000000007f9affff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007f9b0000-0x000000007f9dafff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007f9db000-0x000000007fef8fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007fef9000-0x000000007fefffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000093200000-0x0000000093200fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] efi: EFI v1.10 by Apple
[ 0.000000] efi: ACPI=0x7f96a000 ACPI 2.0=0x7f96a014 SMBIOS=0x7f71a000
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBookAir3,1/Mac-942452F5819B1C1B, BIOS MBA31.88Z.0061.B07.1201241641 01/24/12
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1397.185 MHz processor
[ 0.000027] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000036] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000054] last_pfn = 0x7fef9 max_arch_pfn = 0x400000000
[ 0.001564] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.027471] Secure boot disabled
[ 0.027478] RAMDISK: [mem 0x67891000-0x684ddfff]
[ 0.027491] ACPI: Early table checksum verification disabled
[ 0.027499] ACPI: RSDP 0x000000007F96A014 000024 (v02 APPLE )
[ 0.027510] ACPI: XSDT 0x000000007F96A1C0 000084 (v01 APPLE Apple00 00000061 01000013)
[ 0.027525] ACPI: FACP 0x000000007F968000 0000F4 (v04 APPLE Apple00 00000061 Loki 0000005F)
[ 0.027540] ACPI: DSDT 0x000000007F95B000 00572C (v01 APPLE MacBookA 00030001 INTL 20061109)
[ 0.027550] ACPI: FACS 0x000000007F71E000 000040
[ 0.027558] ACPI: FACS 0x000000007F71E000 000040
[ 0.027566] ACPI: HPET 0x000000007F967000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.027576] ACPI: APIC 0x000000007F966000 000068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.027586] ACPI: APIC 0x000000007F965000 000068 (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.027596] ACPI: ASF! 0x000000007F963000 0000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.027606] ACPI: SBST 0x000000007F962000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.027615] ACPI: ECDT 0x000000007F961000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.027625] ACPI: SSDT 0x000000007F958000 000107 (v01 APPLE SataAhci 00001000 INTL 20061109)
[ 0.027635] ACPI: SSDT 0x000000007F957000 000024 (v01 APPLE Apple 00001000 INTL 20061109)
[ 0.027645] ACPI: SSDT 0x000000007F955000 00008A (v01 APPLE NoSDCard 00001000 INTL 20061109)
[ 0.027654] ACPI: SSDT 0x000000007F954000 0004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.027663] ACPI: MCFG 0x000000007F964000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.027671] ACPI: Reserving FACP table memory at [mem 0x7f968000-0x7f9680f3]
[ 0.027676] ACPI: Reserving DSDT table memory at [mem 0x7f95b000-0x7f96072b]
[ 0.027679] ACPI: Reserving FACS table memory at [mem 0x7f71e000-0x7f71e03f]
[ 0.027682] ACPI: Reserving FACS table memory at [mem 0x7f71e000-0x7f71e03f]
[ 0.027685] ACPI: Reserving HPET table memory at [mem 0x7f967000-0x7f967037]
[ 0.027688] ACPI: Reserving APIC table memory at [mem 0x7f966000-0x7f966067]
[ 0.027692] ACPI: Reserving APIC table memory at [mem 0x7f965000-0x7f965067]
[ 0.027695] ACPI: Reserving ASF! table memory at [mem 0x7f963000-0x7f9630a4]
[ 0.027698] ACPI: Reserving SBST table memory at [mem 0x7f962000-0x7f96202f]
[ 0.027701] ACPI: Reserving ECDT table memory at [mem 0x7f961000-0x7f961052]
[ 0.027704] ACPI: Reserving SSDT table memory at [mem 0x7f958000-0x7f958106]
[ 0.027707] ACPI: Reserving SSDT table memory at [mem 0x7f957000-0x7f957023]
[ 0.027711] ACPI: Reserving SSDT table memory at [mem 0x7f955000-0x7f955089]
[ 0.027714] ACPI: Reserving SSDT table memory at [mem 0x7f954000-0x7f9544db]
[ 0.027717] ACPI: Reserving MCFG table memory at [mem 0x7f964000-0x7f96403b]
[ 0.027725] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.027728] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.027740] ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware
[ 0.027838] No NUMA configuration found
[ 0.027840] Faking a node at [mem 0x0000000000000000-0x000000007fef8fff]
[ 0.027849] NODE_DATA(0) allocated [mem 0x7fef5000-0x7fef8fff]
[ 0.027902] Zone ranges:
[ 0.027904] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.027910] DMA32 [mem 0x0000000001000000-0x000000007fef8fff]
[ 0.027915] Normal empty
[ 0.027918] Device empty
[ 0.027921] Movable zone start for each node
[ 0.027923] Early memory node ranges
[ 0.027925] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.027929] node 0: [mem 0x0000000000090000-0x000000000009ffff]
[ 0.027932] node 0: [mem 0x0000000000100000-0x000000006effffff]
[ 0.027936] node 0: [mem 0x000000007f000000-0x000000007f718fff]
[ 0.027939] node 0: [mem 0x000000007f939000-0x000000007f953fff]
[ 0.027942] node 0: [mem 0x000000007f96b000-0x000000007f96dfff]
[ 0.027945] node 0: [mem 0x000000007f99b000-0x000000007f9affff]
[ 0.027949] node 0: [mem 0x000000007f9db000-0x000000007fef8fff]
[ 0.027953] Initmem setup node 0 [mem 0x0000000000001000-0x000000007fef8fff]
[ 0.027964] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.027968] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.028046] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.046116] On node 0, zone DMA32: 32768 pages in unavailable ranges
[ 0.046146] On node 0, zone DMA32: 544 pages in unavailable ranges
[ 0.046150] On node 0, zone DMA32: 23 pages in unavailable ranges
[ 0.046157] On node 0, zone DMA32: 45 pages in unavailable ranges
[ 0.046214] On node 0, zone DMA32: 43 pages in unavailable ranges
[ 0.046227] On node 0, zone DMA32: 263 pages in unavailable ranges
[ 0.046560] ACPI: PM-Timer IO Port: 0x408
[ 0.046581] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.046586] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.046603] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.046611] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.046616] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.046625] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.046628] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.046641] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.046695] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.046702] PM: hibernation: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.046707] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.046713] PM: hibernation: Registered nosave memory: [mem 0x6d439000-0x6d439fff]
[ 0.046718] PM: hibernation: Registered nosave memory: [mem 0x6d439000-0x6d439fff]
[ 0.046721] PM: hibernation: Registered nosave memory: [mem 0x6d43a000-0x6d43afff]
[ 0.046726] PM: hibernation: Registered nosave memory: [mem 0x6d448000-0x6d448fff]
[ 0.046731] PM: hibernation: Registered nosave memory: [mem 0x6f000000-0x7effffff]
[ 0.046736] PM: hibernation: Registered nosave memory: [mem 0x7f719000-0x7f938fff]
[ 0.046742] PM: hibernation: Registered nosave memory: [mem 0x7f954000-0x7f96afff]
[ 0.046747] PM: hibernation: Registered nosave memory: [mem 0x7f96e000-0x7f99afff]
[ 0.046752] PM: hibernation: Registered nosave memory: [mem 0x7f9b0000-0x7f9dafff]
[ 0.046757] [mem 0x93201000-0xffbfffff] available for PCI devices
[ 0.046763] Booting paravirtualized kernel on bare hardware
[ 0.046771] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.061652] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:2 nr_node_ids:1
[ 0.062557] percpu: Embedded 53 pages/cpu s180224 r8192 d28672 u1048576
[ 0.062577] pcpu-alloc: s180224 r8192 d28672 u1048576 alloc=1*2097152
[ 0.062584] pcpu-alloc: [0] 0 1
[ 0.062648] Built 1 zonelists, mobility grouping on. Total pages: 450424
[ 0.062655] Policy zone: DMA32
[ 0.062658] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=/dev/sda3 rw ipv6.disable=1
[ 0.063637] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.064103] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.065156] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[ 0.086639] Memory: 1690096K/1830944K available (14344K kernel code, 2070K rwdata, 10772K rodata, 1832K init, 3876K bss, 140588K reserved, 0K cma-reserved)
[ 0.086659] random: get_random_u64 called from __kmem_cache_create+0x2a/0x540 with crng_init=0
[ 0.087078] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.087117] Kernel/User page tables isolation: enabled
[ 0.087166] ftrace: allocating 44240 entries in 173 pages
[ 0.124641] ftrace: allocated 173 pages with 5 groups
[ 0.124964] rcu: Preemptible hierarchical RCU implementation.
[ 0.124968] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.124970] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2.
[ 0.124974] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.124977] Trampoline variant of Tasks RCU enabled.
[ 0.124979] Rude variant of Tasks RCU enabled.
[ 0.124980] Tracing variant of Tasks RCU enabled.
[ 0.124982] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.124985] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.136091] NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16
[ 0.136615] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.136715] spurious 8259A interrupt: IRQ7.
[ 0.136753] Console: colour dummy device 80x25
[ 0.136801] printk: console [tty0] enabled
[ 0.136852] ACPI: Core revision 20210730
[ 0.137070] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.137098] APIC: Switch to symmetric I/O mode setup
[ 0.137620] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.153763] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1423bd24a8e, max_idle_ns: 440795254148 ns
[ 0.153776] Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.80 BogoMIPS (lpj=4657283)
[ 0.153783] pid_max: default: 32768 minimum: 301
[ 0.175456] LSM: Security Framework initializing
[ 0.175480] landlock: Up and running.
[ 0.175484] Yama: becoming mindful.
[ 0.175504] LSM support for eBPF active
[ 0.175548] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.175568] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.176218] CPU0: Thermal monitoring enabled (TM2)
[ 0.176241] process: using mwait in idle threads
[ 0.176247] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.176251] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.176260] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.176265] Spectre V2 : Mitigation: Full generic retpoline
[ 0.176267] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.176270] Speculative Store Bypass: Vulnerable
[ 0.176276] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.182847] Freeing SMP alternatives memory: 36K
[ 0.290013] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU U9400 @ 1.40GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.290438] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.290438] ... version: 2
[ 0.290438] ... bit width: 40
[ 0.290438] ... generic registers: 2
[ 0.290438] ... value mask: 000000ffffffffff
[ 0.290438] ... max period: 000000007fffffff
[ 0.290438] ... fixed-purpose events: 3
[ 0.290438] ... event mask: 0000000700000003
[ 0.290438] rcu: Hierarchical SRCU implementation.
[ 0.290438] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.290438] smp: Bringing up secondary CPUs ...
[ 0.290438] x86: Booting SMP configuration:
[ 0.290438] .... node #0, CPUs: #1
[ 0.299182] smp: Brought up 1 node, 2 CPUs
[ 0.299182] smpboot: Max logical packages: 1
[ 0.299182] smpboot: Total of 2 processors activated (5590.60 BogoMIPS)
[ 0.303947] devtmpfs: initialized
[ 0.303947] x86/mm: Memory block size: 128MB
[ 0.304574] ACPI: PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.304574] ACPI: PM: Registering ACPI NVS region [mem 0x7f719000-0x7f938fff] (2228224 bytes)
[ 0.304574] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.304574] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.304574] pinctrl core: initialized pinctrl subsystem
[ 0.304574] PM: RTC time: 04:30:03, date: 2001-01-01
[ 0.304789] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.305098] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.305182] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.305265] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.305285] audit: initializing netlink subsys (disabled)
[ 0.305307] audit: type=2000 audit(978323403.166:1): state=initialized audit_enabled=0 res=1
[ 0.305307] thermal_sys: Registered thermal governor 'fair_share'
[ 0.305307] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.305307] thermal_sys: Registered thermal governor 'step_wise'
[ 0.305307] thermal_sys: Registered thermal governor 'user_space'
[ 0.305307] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.305307] cpuidle: using governor ladder
[ 0.305307] cpuidle: using governor menu
[ 0.307200] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.307204] ACPI: bus type PCI registered
[ 0.307207] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.307649] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
[ 0.307662] PCI: not using MMCONFIG
[ 0.307670] PCI: Using configuration type 1 for base access
[ 0.311786] Kprobes globally optimized
[ 0.311838] HugeTLB: can free 6 vmemmap pages for hugepages-2048kB
[ 0.311838] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.314044] ACPI: Disabled all _OSI OS vendors
[ 0.314049] ACPI: Added _OSI(Module Device)
[ 0.314052] ACPI: Added _OSI(Processor Device)
[ 0.314054] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.314057] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.314060] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.314063] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.314065] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.314068] ACPI: Added _OSI(Darwin)
[ 0.327512] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.328422] ACPI: EC: EC started
[ 0.328425] ACPI: EC: interrupt blocked
[ 0.330113] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.330113] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.330113] ACPI: BIOS _OSI(Darwin) query honored via DMI
[ 0.330967] ACPI: Dynamic OEM Table Load:
[ 0.330985] ACPI: SSDT 0xFFFF906EC180A200 0001FB (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.332541] ACPI: Dynamic OEM Table Load:
[ 0.332557] ACPI: SSDT 0xFFFF906EC13BF800 0005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.334674] ACPI: Dynamic OEM Table Load:
[ 0.334689] ACPI: SSDT 0xFFFF906EC13DFF00 0000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.335835] ACPI: Dynamic OEM Table Load:
[ 0.335849] ACPI: SSDT 0xFFFF906EC13ED180 000085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.337278] ACPI: Interpreter enabled
[ 0.337324] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.337328] ACPI: Using IOAPIC for interrupt routing
[ 0.337392] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
[ 0.338248] PCI: MMCONFIG at [mem 0xf0000000-0xf02fffff] reserved in ACPI motherboard resources
[ 0.338271] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.338838] ACPI: Enabled 7 GPEs in block 00 to 1F
[ 0.338855] ACPI: Enabled 2 GPEs in block 20 to 5F
[ 0.365651] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.365670] acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability LTR DPC]
[ 0.365695] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-02] only partially covers this bridge
[ 0.366369] PCI host bridge to bus 0000:00
[ 0.366374] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.366381] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.366385] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.366390] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.366394] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.366398] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.366402] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.366406] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.366410] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.366414] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.366418] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.366422] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.366426] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.366430] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.366434] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.366438] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.366442] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.366446] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.366671] pci 0000:00:00.0: [10de:0d60] type 00 class 0x060000
[ 0.367178] pci 0000:00:00.1: [10de:0d68] type 00 class 0x050000
[ 0.367587] pci 0000:00:01.0: [10de:0d6d] type 00 class 0x050000
[ 0.368107] pci 0000:00:01.1: [10de:0d6e] type 00 class 0x050000
[ 0.368503] pci 0000:00:01.2: [10de:0d6f] type 00 class 0x050000
[ 0.368929] pci 0000:00:01.3: [10de:0d70] type 00 class 0x050000
[ 0.369360] pci 0000:00:02.0: [10de:0d71] type 00 class 0x050000
[ 0.369798] pci 0000:00:02.1: [10de:0d72] type 00 class 0x050000
[ 0.370313] pci 0000:00:03.0: [10de:0d80] type 00 class 0x060100
[ 0.370332] pci 0000:00:03.0: reg 0x10: [io 0x2100-0x21ff]
[ 0.370739] pci 0000:00:03.1: [10de:0d7b] type 00 class 0x050000
[ 0.371158] pci 0000:00:03.2: [10de:0d79] type 00 class 0x0c0500
[ 0.371178] pci 0000:00:03.2: reg 0x10: [io 0x2000-0x20ff]
[ 0.371190] pci 0000:00:03.2: reg 0x14: [mem 0x93286000-0x93287fff]
[ 0.371215] pci 0000:00:03.2: reg 0x20: [io 0x2240-0x227f]
[ 0.371227] pci 0000:00:03.2: reg 0x24: [io 0x2200-0x223f]
[ 0.371279] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.371564] pci 0000:00:03.3: [10de:0d69] type 00 class 0x050000
[ 0.372124] pci 0000:00:03.4: [10de:0d7a] type 00 class 0x0b4000
[ 0.372161] pci 0000:00:03.4: reg 0x10: [mem 0x93200000-0x9327ffff]
[ 0.372660] pci 0000:00:04.0: [10de:0d9c] type 00 class 0x0c0310
[ 0.372679] pci 0000:00:04.0: reg 0x10: [mem 0x9328a000-0x9328afff]
[ 0.372758] pci 0000:00:04.0: supports D1 D2
[ 0.372762] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.373875] pci 0000:00:04.1: [10de:0d9d] type 00 class 0x0c0320
[ 0.373895] pci 0000:00:04.1: reg 0x10: [mem 0x9328b100-0x9328b1ff]
[ 0.373982] pci 0000:00:04.1: supports D1 D2
[ 0.373986] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.375280] pci 0000:00:06.0: [10de:0d9c] type 00 class 0x0c0310
[ 0.375301] pci 0000:00:06.0: reg 0x10: [mem 0x93289000-0x93289fff]
[ 0.375381] pci 0000:00:06.0: supports D1 D2
[ 0.375385] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.376462] pci 0000:00:06.1: [10de:0d9d] type 00 class 0x0c0320
[ 0.376483] pci 0000:00:06.1: reg 0x10: [mem 0x9328b000-0x9328b0ff]
[ 0.376570] pci 0000:00:06.1: supports D1 D2
[ 0.376574] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.377851] pci 0000:00:08.0: [10de:0d94] type 00 class 0x040300
[ 0.377870] pci 0000:00:08.0: reg 0x10: [mem 0x93280000-0x93283fff]
[ 0.377947] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.378564] pci 0000:00:0a.0: [10de:0d88] type 00 class 0x010601
[ 0.378582] pci 0000:00:0a.0: reg 0x10: [io 0x2298-0x229f]
[ 0.378593] pci 0000:00:0a.0: reg 0x14: [io 0x22a4-0x22a7]
[ 0.378604] pci 0000:00:0a.0: reg 0x18: [io 0x2290-0x2297]
[ 0.378614] pci 0000:00:0a.0: reg 0x1c: [io 0x22a0-0x22a3]
[ 0.378624] pci 0000:00:0a.0: reg 0x20: [io 0x2280-0x228f]
[ 0.378634] pci 0000:00:0a.0: reg 0x24: [mem 0x93284000-0x93285fff]
[ 0.379684] pci 0000:00:0b.0: [10de:0d75] type 00 class 0x050000
[ 0.379702] pci 0000:00:0b.0: reg 0x10: [mem 0x93288000-0x93288fff]
[ 0.380212] pci 0000:00:15.0: [10de:0d9b] type 01 class 0x060400
[ 0.380362] pci 0000:00:15.0: enabling Extended Tags
[ 0.380557] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.381015] pci 0000:00:17.0: [10de:0d76] type 01 class 0x060400
[ 0.381089] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
[ 0.381505] pci 0000:01:00.0: [14e4:4353] type 00 class 0x028000
[ 0.381540] pci 0000:01:00.0: reg 0x10: [mem 0x93100000-0x93103fff 64bit]
[ 0.381611] pci 0000:01:00.0: enabling Extended Tags
[ 0.381711] pci 0000:01:00.0: supports D1 D2
[ 0.381714] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.381988] pci 0000:00:15.0: PCI bridge to [bus 01]
[ 0.382016] pci 0000:00:15.0: bridge window [mem 0x93100000-0x931fffff]
[ 0.382060] pci_bus 0000:02: extended config space not accessible
[ 0.382144] pci 0000:02:00.0: [10de:08a2] type 00 class 0x030000
[ 0.382162] pci 0000:02:00.0: reg 0x10: [mem 0x92000000-0x92ffffff]
[ 0.382176] pci 0000:02:00.0: reg 0x14: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.382190] pci 0000:02:00.0: reg 0x1c: [mem 0x90000000-0x91ffffff 64bit pref]
[ 0.382200] pci 0000:02:00.0: reg 0x24: [io 0x1000-0x107f]
[ 0.382210] pci 0000:02:00.0: reg 0x30: [mem 0x93000000-0x9301ffff pref]
[ 0.382231] pci 0000:02:00.0: Enabling HDA controller
[ 0.382238] pci 0000:02:00.0: BAR 1: assigned to efifb
[ 0.384256] pci 0000:00:17.0: PCI bridge to [bus 02]
[ 0.384265] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
[ 0.384272] pci 0000:00:17.0: bridge window [mem 0x92000000-0x930fffff]
[ 0.384279] pci 0000:00:17.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.385415] ACPI: PCI: Interrupt link LNK1 configured for IRQ 16
[ 0.385767] ACPI: PCI: Interrupt link LNK2 configured for IRQ 17
[ 0.386116] ACPI: PCI: Interrupt link LNK3 configured for IRQ 18
[ 0.386465] ACPI: PCI: Interrupt link LNK4 configured for IRQ 19
[ 0.386815] ACPI: PCI: Interrupt link Z00J configured for IRQ 21
[ 0.387174] ACPI: PCI: Interrupt link Z00K configured for IRQ 21
[ 0.387588] ACPI: PCI: Interrupt link Z00L configured for IRQ 21
[ 0.387939] ACPI: PCI: Interrupt link Z00M configured for IRQ 21
[ 0.388289] ACPI: PCI: Interrupt link LSMB configured for IRQ 22
[ 0.388637] ACPI: PCI: Interrupt link LUS0 configured for IRQ 17
[ 0.388986] ACPI: PCI: Interrupt link LUS2 configured for IRQ 17
[ 0.389340] ACPI: PCI: Interrupt link LMAC configured for IRQ 17
[ 0.389689] ACPI: PCI: Interrupt link LAZA configured for IRQ 20
[ 0.390038] ACPI: PCI: Interrupt link LGPU configured for IRQ 16
[ 0.390379] ACPI: PCI: Interrupt link LPID configured for IRQ 0
[ 0.390383] ACPI: PCI: Interrupt link LPID disabled
[ 0.390738] ACPI: PCI: Interrupt link LSI0 configured for IRQ 18
[ 0.391085] ACPI: PCI: Interrupt link Z000 configured for IRQ 18
[ 0.391433] ACPI: PCI: Interrupt link Z001 configured for IRQ 22
[ 0.391772] ACPI: PCI: Interrupt link LPMU configured for IRQ 0
[ 0.391777] ACPI: PCI: Interrupt link LPMU disabled
[ 0.392415] ACPI: EC: interrupt unblocked
[ 0.392419] ACPI: EC: event unblocked
[ 0.392427] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.392430] ACPI: EC: GPE=0x57
[ 0.392434] ACPI: \_SB_.PCI0.LPCB.EC__: Boot ECDT EC initialization complete
[ 0.392439] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[ 0.392602] iommu: Default domain type: Translated
[ 0.392606] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.393804] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.393804] pci 0000:02:00.0: vgaarb: bridge control possible
[ 0.393808] pci 0000:02:00.0: vgaarb: setting as boot device
[ 0.393811] vgaarb: loaded
[ 0.394294] SCSI subsystem initialized
[ 0.394316] libata version 3.00 loaded.
[ 0.394316] ACPI: bus type USB registered
[ 0.394316] usbcore: registered new interface driver usbfs
[ 0.394316] usbcore: registered new interface driver hub
[ 0.394316] usbcore: registered new device driver usb
[ 0.394316] pps_core: LinuxPPS API ver. 1 registered
[ 0.394316] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.394316] PTP clock support registered
[ 0.394316] EDAC MC: Ver: 3.0.0
[ 0.394316] Registered efivars operations
[ 0.397417] NetLabel: Initializing
[ 0.397420] NetLabel: domain hash size = 128
[ 0.397422] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.397465] NetLabel: unlabeled traffic allowed by default
[ 0.397477] PCI: Using ACPI for IRQ routing
[ 0.397481] PCI: pci_cache_line_size set to 64 bytes
[ 0.397607] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.397612] e820: reserve RAM buffer [mem 0x6d439018-0x6fffffff]
[ 0.397616] e820: reserve RAM buffer [mem 0x6d43a018-0x6fffffff]
[ 0.397619] e820: reserve RAM buffer [mem 0x6f000000-0x6fffffff]
[ 0.397622] e820: reserve RAM buffer [mem 0x7f719000-0x7fffffff]
[ 0.397627] e820: reserve RAM buffer [mem 0x7f954000-0x7fffffff]
[ 0.397631] e820: reserve RAM buffer [mem 0x7f96e000-0x7fffffff]
[ 0.397635] e820: reserve RAM buffer [mem 0x7f9b0000-0x7fffffff]
[ 0.397639] e820: reserve RAM buffer [mem 0x7fef9000-0x7fffffff]
[ 0.399507] hpet: 4 channels of 0 reserved for per-cpu timers
[ 0.399507] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.399507] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.400448] clocksource: Switched to clocksource tsc-early
[ 0.429312] VFS: Disk quotas dquot_6.6.0
[ 0.429355] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.429516] pnp: PnP ACPI init
[ 0.429839] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.430256] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.430666] system 00:02: [io 0x0400-0x047f] has been reserved
[ 0.430673] system 00:02: [io 0x0480-0x04ff] has been reserved
[ 0.430678] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.430683] system 00:02: [io 0x0580-0x05ff] has been reserved
[ 0.430688] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.430692] system 00:02: [io 0x0880-0x08ff] has been reserved
[ 0.430698] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.430706] system 00:02: [io 0x0295-0x0296] has been reserved
[ 0.431955] pnp: PnP ACPI: found 4 devices
[ 0.435653] pci 0000:02:00.0: assigning 36 device properties
[ 0.435704] pci 0000:00:08.0: assigning 4 device properties
[ 0.440259] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.440416] NET: Registered PF_INET protocol family
[ 0.440578] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.442530] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.442606] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.442763] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.442844] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.443014] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.443067] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.443098] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.443188] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.443203] NET: Registered PF_XDP protocol family
[ 0.443247] pci 0000:00:15.0: PCI bridge to [bus 01]
[ 0.443270] pci 0000:00:15.0: bridge window [mem 0x93100000-0x931fffff]
[ 0.443297] pci 0000:00:17.0: PCI bridge to [bus 02]
[ 0.443302] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
[ 0.443309] pci 0000:00:17.0: bridge window [mem 0x92000000-0x930fffff]
[ 0.443314] pci 0000:00:17.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.443323] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.443327] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.443332] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.443336] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.443341] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.443345] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.443349] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.443354] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.443358] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.443362] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.443366] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.443370] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.443375] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.443379] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.443383] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.443387] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.443392] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff window]
[ 0.443397] pci_bus 0000:01: resource 1 [mem 0x93100000-0x931fffff]
[ 0.443402] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.443406] pci_bus 0000:02: resource 1 [mem 0x92000000-0x930fffff]
[ 0.443410] pci_bus 0000:02: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.444702] ACPI: \_SB_.PCI0.LUS0: Enabled at IRQ 23
[ 0.445943] ACPI: \_SB_.PCI0.LUS2: Enabled at IRQ 23
[ 0.447091] ACPI: \_SB_.PCI0.Z000: Enabled at IRQ 20
[ 0.448274] ACPI: \_SB_.PCI0.Z001: Enabled at IRQ 19
[ 0.448765] PCI: CLS 256 bytes, default 64
[ 0.448935] Trying to unpack rootfs image as initramfs...
[ 0.456350] Initialise system trusted keyrings
[ 0.456381] Key type blacklist registered
[ 0.457975] workingset: timestamp_bits=41 max_order=19 bucket_order=0
[ 0.461957] zbud: loaded
[ 0.487986] Key type asymmetric registered
[ 0.487997] Asymmetric key parser 'x509' registered
[ 0.488095] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.491325] io scheduler mq-deadline registered
[ 0.491331] io scheduler kyber registered
[ 0.491450] io scheduler bfq registered
[ 0.492812] ACPI: \_SB_.PCI0.Z00J: Enabled at IRQ 22
[ 0.493329] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.493658] Monitor-Mwait will be used to enter C-1 state
[ 0.493695] Monitor-Mwait will be used to enter C-2 state
[ 0.493708] Monitor-Mwait will be used to enter C-3 state
[ 0.493745] ACPI: \_PR_.CPU0: Found 3 idle states
[ 0.494271] ACPI: AC: AC Adapter [ADP1] (on-line)
[ 0.494405] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.503898] ACPI: button: Lid Switch [LID0]
[ 0.504018] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.504078] ACPI: button: Power Button [PWRB]
[ 0.504159] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.504205] ACPI: button: Sleep Button [SLPB]
[ 0.504349] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.504423] ACPI: button: Power Button [PWRF]
[ 0.505345] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.509791] Non-volatile memory driver v1.3
[ 0.509797] Linux agpgart interface v0.103
[ 0.509800] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.509803] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.510844] ahci 0000:00:0a.0: version 3.0
[ 0.511757] ACPI: \_SB_.PCI0.LSI0: Enabled at IRQ 18
[ 0.511914] ahci 0000:00:0a.0: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 0.511924] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led pio slum part apst
[ 0.512402] scsi host0: ahci
[ 0.512576] ata1: SATA max UDMA/133 abar m8192@0x93284000 port 0x93284100 irq 25
[ 0.512675] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.512690] ehci-pci: EHCI PCI platform driver
[ 0.513096] ehci-pci 0000:00:04.1: EHCI Host Controller
[ 0.513111] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.513126] ehci-pci 0000:00:04.1: debug port 1
[ 0.513169] ehci-pci 0000:00:04.1: disable ppcd for nvidia mcp89
[ 0.513201] ehci-pci 0000:00:04.1: irq 23, io mem 0x9328b100
[ 0.523846] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.10
[ 0.524028] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 0.524035] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.524040] usb usb1: Product: EHCI Host Controller
[ 0.524044] usb usb1: Manufacturer: Linux 5.15.2-arch1-1 ehci_hcd
[ 0.524047] usb usb1: SerialNumber: 0000:00:04.1
[ 0.524402] hub 1-0:1.0: USB hub found
[ 0.524424] hub 1-0:1.0: 6 ports detected
[ 0.525505] ehci-pci 0000:00:06.1: EHCI Host Controller
[ 0.525519] ehci-pci 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.525535] ehci-pci 0000:00:06.1: debug port 1
[ 0.525577] ehci-pci 0000:00:06.1: disable ppcd for nvidia mcp89
[ 0.525616] ehci-pci 0000:00:06.1: irq 19, io mem 0x9328b000
[ 0.537174] ehci-pci 0000:00:06.1: USB 2.0 started, EHCI 1.10
[ 0.537333] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[ 0.537341] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.537345] usb usb2: Product: EHCI Host Controller
[ 0.537349] usb usb2: Manufacturer: Linux 5.15.2-arch1-1 ehci_hcd
[ 0.537353] usb usb2: SerialNumber: 0000:00:06.1
[ 0.537675] hub 2-0:1.0: USB hub found
[ 0.537696] hub 2-0:1.0: 6 ports detected
[ 0.538355] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.538367] ohci-pci: OHCI PCI platform driver
[ 0.538779] ohci-pci 0000:00:04.0: OHCI PCI host controller
[ 0.538795] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 0.538850] ohci-pci 0000:00:04.0: irq 23, io mem 0x9328a000
[ 0.595973] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 0.595988] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.595993] usb usb3: Product: OHCI PCI host controller
[ 0.595997] usb usb3: Manufacturer: Linux 5.15.2-arch1-1 ohci_hcd
[ 0.596000] usb usb3: SerialNumber: 0000:00:04.0
[ 0.596354] hub 3-0:1.0: USB hub found
[ 0.596374] hub 3-0:1.0: 6 ports detected
[ 0.597508] ohci-pci 0000:00:06.0: OHCI PCI host controller
[ 0.597528] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 0.597589] ohci-pci 0000:00:06.0: irq 20, io mem 0x93289000
[ 0.607567] Freeing initrd memory: 12596K
[ 0.631473] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[ 0.631485] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.631490] usb usb4: Product: OHCI PCI host controller
[ 0.631494] usb usb4: Manufacturer: Linux 5.15.2-arch1-1 ohci_hcd
[ 0.631498] usb usb4: SerialNumber: 0000:00:06.0
[ 0.631832] hub 4-0:1.0: USB hub found
[ 0.631859] hub 4-0:1.0: 6 ports detected
[ 0.632500] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.632636] usbcore: registered new interface driver usbserial_generic
[ 0.632649] usbserial: USB Serial support registered for generic
[ 0.633046] rtc_cmos 00:03: RTC can wake from S4
[ 0.633636] rtc_cmos 00:03: registered as rtc0
[ 0.633729] rtc_cmos 00:03: setting system clock to 2001-01-01T04:30:03 UTC (978323403)
[ 0.633768] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.633940] intel_pstate: CPU model not supported
[ 0.633987] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.634357] efifb: probing for efifb
[ 0.634391] efifb: No BGRT, not showing boot graphics
[ 0.634394] efifb: framebuffer at 0x80010000, using 6144k, total 6144k
[ 0.634397] efifb: mode is 1366x768x32, linelength=8192, pages=1
[ 0.634401] efifb: scrolling: redraw
[ 0.634403] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.634507] fbcon: Deferring console take-over
[ 0.634510] fb0: EFI VGA frame buffer device
[ 0.634551] hid: raw HID events driver (C) Jiri Kosina
[ 0.634733] drop_monitor: Initializing network drop monitor service
[ 0.634884] Initializing XFRM netlink socket
[ 0.634892] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 0.634896] NET: Registered PF_PACKET protocol family
[ 0.635324] microcode: sig=0x1067a, pf=0x80, revision=0xa0b
[ 0.635339] microcode: Microcode Update Driver: v2.2.
[ 0.635348] IPI shorthand broadcast: enabled
[ 0.635373] sched_clock: Marking stable (634463590, 678134)->(646882971, -11741247)
[ 0.635671] registered taskstats version 1
[ 0.635852] Loading compiled-in X.509 certificates
[ 0.648208] Loaded X.509 cert 'Build time autogenerated kernel key: ac48247ae4b694dd45afa078318e6038d5aa91dc'
[ 0.648601] zswap: loaded using pool lz4/z3fold
[ 0.649033] Key type ._fscrypt registered
[ 0.649038] Key type .fscrypt registered
[ 0.649040] Key type fscrypt-provisioning registered
[ 0.649783] PM: Magic number: 1:939:513
[ 0.650156] RAS: Correctable Errors collector initialized.
[ 0.717187] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 0.741848] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.807503] usb 2-2: New USB device found, idVendor=0411, idProduct=00a0, bcdDevice= 1.10
[ 0.807516] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 0.807521] usb 2-2: Product: USB Flash Disk
[ 0.807525] usb 2-2: Manufacturer: BUFFALO
[ 0.807529] usb 2-2: SerialNumber: 07980E08B2F10E23
[ 0.874036] usb 3-1: new full-speed USB device number 2 using ohci-pci
[ 0.930835] random: fast init done
[ 0.930838] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc-early' as unstable because the skew is too large:
[ 0.930845] clocksource: 'hpet' wd_nsec: 506667400 wd_now: 1913bc9 wd_last: cff48c mask: ffffffff
[ 0.930851] clocksource: 'tsc-early' cs_nsec: 284910581 cs_now: 5b52e75f0 cs_last: 59d745a16 mask: ffffffffffffffff
[ 0.930856] clocksource: 'tsc-early' is current clocksource.
[ 0.930869] tsc: Marking TSC unstable due to clocksource watchdog
[ 0.930886] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 0.930888] sched_clock: Marking unstable (930207429, 678134)<-(942626783, -11741247)
[ 0.931144] clocksource: Switched to clocksource hpet
[ 1.307381] usb 3-1: New USB device found, idVendor=04fe, idProduct=0008, bcdDevice= 1.02
[ 1.307394] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.307399] usb 3-1: Product: Generic USB Hub
[ 1.307404] usb 3-1: Manufacturer: Chicony
[ 1.310515] hub 3-1:1.0: USB hub found
[ 1.313375] hub 3-1:1.0: 3 ports detected
[ 1.623917] usb 3-1.1: new full-speed USB device number 3 using ohci-pci
[ 1.740377] usb 3-1.1: New USB device found, idVendor=04fe, idProduct=0006, bcdDevice= 1.02
[ 1.740390] usb 3-1.1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 1.740395] usb 3-1.1: Product: PFU-65 USB Keyboard
[ 1.740399] usb 3-1.1: Manufacturer: Chicony
[ 1.927258] usb 3-5: new full-speed USB device number 4 using ohci-pci
[ 2.166377] usb 3-5: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00
[ 2.166390] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.166395] usb 3-5: Product: BRCM2070 Hub
[ 2.166399] usb 3-5: Manufacturer: Apple Inc.
[ 2.169491] hub 3-5:1.0: USB hub found
[ 2.172374] hub 3-5:1.0: 3 ports detected
[ 2.490594] usb 3-5.1: new full-speed USB device number 5 using ohci-pci
[ 2.590596] usb 1-6: new high-speed USB device number 4 using ehci-pci
[ 2.607293] usb 3-5.1: New USB device found, idVendor=05ac, idProduct=820a, bcdDevice= 1.00
[ 2.607306] usb 3-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.690591] usb 3-5.2: new full-speed USB device number 6 using ohci-pci
[ 2.761600] usb 1-6: New USB device found, idVendor=05ac, idProduct=850a, bcdDevice= 6.25
[ 2.761612] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.761617] usb 1-6: Product: Built-in iSight
[ 2.761621] usb 1-6: Manufacturer: Apple Inc.
[ 2.761625] usb 1-6: SerialNumber: CCGA9SAZ4UDF9KF0
[ 2.807300] usb 3-5.2: New USB device found, idVendor=05ac, idProduct=820b, bcdDevice= 1.00
[ 2.807312] usb 3-5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.890592] usb 3-5.3: new full-speed USB device number 7 using ohci-pci
[ 3.017304] usb 3-5.3: New USB device found, idVendor=05ac, idProduct=821b, bcdDevice= 0.42
[ 3.017317] usb 3-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.017322] usb 3-5.3: Product: Bluetooth USB Host Controller
[ 3.017326] usb 3-5.3: Manufacturer: Apple Inc.
[ 5.950599] ata1.00: qc timeout (cmd 0xec)
[ 5.950616] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 6.260968] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 16.403925] ata1.00: qc timeout (cmd 0xec)
[ 16.403940] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 16.403947] ata1: limiting SATA link speed to 1.5 Gbps
[ 16.714298] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 47.550603] ata1.00: qc timeout (cmd 0xec)
[ 47.550620] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 47.860955] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 47.864399] Freeing unused decrypted memory: 2036K
[ 47.865556] Freeing unused kernel image (initmem) memory: 1832K
[ 47.865651] Write protecting the kernel read-only data: 28672k
[ 47.867568] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 47.868760] Freeing unused kernel image (rodata/data gap) memory: 1516K
[ 47.984641] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 47.984653] rodata_test: all tests were successful
[ 47.984693] x86/mm: Checking user space page tables
[ 48.097099] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 48.097162] Run /init as init process
[ 48.097166] with arguments:
[ 48.097169] /init
[ 48.097172] with environment:
[ 48.097175] HOME=/
[ 48.097177] TERM=linux
[ 48.986214] fbcon: Taking over console
[ 48.986557] Console: switching to colour frame buffer device 170x48
[ 49.374948] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 49.375941] scsi host1: usb-storage 2-2:1.0
[ 49.376315] usbcore: registered new interface driver usb-storage
[ 49.381292] input: Chicony PFU-65 USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:04FE:0006.0001/input/input4
[ 49.392300] usbcore: registered new interface driver uas
[ 49.437571] hid-generic 0003:04FE:0006.0001: input,hidraw0: USB HID v1.00 Keyboard [Chicony PFU-65 USB Keyboard] on usb-0000:00:04.0-1.1/input0
[ 49.444480] input: HID 05ac:820a as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.1/3-5.1:1.0/0003:05AC:820A.0002/input/input5
[ 49.500873] hid-generic 0003:05AC:820A.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:04.0-5.1/input0
[ 49.507257] input: HID 05ac:820b as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.2/3-5.2:1.0/0003:05AC:820B.0003/input/input6
[ 49.507469] hid-generic 0003:05AC:820B.0003: input,hidraw2: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:04.0-5.2/input0
[ 49.507569] usbcore: registered new interface driver usbhid
[ 49.507573] usbhid: USB HID core driver
[-- Attachment #3.1: Type: text/plain, Size: 0 bytes --]
[-- Attachment #3.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 865 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel 5.15 doesn't detect SATA drive on boot
2021-11-16 12:44 Kernel 5.15 doesn't detect SATA drive on boot Yuji Nakao
@ 2021-11-16 23:05 ` Damien Le Moal
2021-11-16 23:26 ` Krzysztof Wilczyński
0 siblings, 1 reply; 14+ messages in thread
From: Damien Le Moal @ 2021-11-16 23:05 UTC (permalink / raw)
To: Yuji Nakao, linux-kernel, linux-pci
On 2021/11/16 21:44, Yuji Nakao wrote:
> Hello,
>
> I'm using Arch Linux on MacBook Air 2010. I updated `linux` package[1]
> from v5.14.16 to v5.15.2 the other day, and the boot process stalled
> with the following message.
>
> ```shell
> :: running early hook [udev]
> Starting version 249.6-3-arch
> :: running hook [udev]
> :: Triggering uevents...
> Waiting 10 seconds for device /dev/sda3 ...
> ERROR: device '/dev/sda3' not found. Skipping fsck.
> :: mounting '/dev/sda' on real root
> mount: /new_root: no filesystem type specified.
> You are now being dropped into an emergency shell.
> sh: can't access tty; job control turned off
> [rootfs ]#
> ```
>
> In the emergency shell there's no `sda` devices when I type `$ ls
> /dev/`. By downgrading the kernel, boot process works properly.
>
> See also Arch Linux bug tracker[2]. There are similar reports on
> Apple devices.
>
> `dmesg` output in the emergency shell is attached. I guess this issue is
> related to libata, so CCed to Damien Le Moal.
I think that this problem is due to recent PCI subsystem changes which broke Mac
support. The problem show up as the interrupts not being delivered, which in
turn result in the kernel assuming that the drive is not working (see the
timeout error messages in your dmesg output). Hence your boot drive detection
fails and no rootfs to mount.
Adding linux-pci list.
>
> Regards.
>
> [1] https://archlinux.org/packages/core/x86_64/linux/
> [2] https://bugs.archlinux.org/task/72734
>
>
--
Damien Le Moal
Western Digital Research
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel 5.15 doesn't detect SATA drive on boot
2021-11-16 23:05 ` Damien Le Moal
@ 2021-11-16 23:26 ` Krzysztof Wilczyński
2021-11-16 23:40 ` Damien Le Moal
2021-11-17 9:07 ` Marc Zyngier
0 siblings, 2 replies; 14+ messages in thread
From: Krzysztof Wilczyński @ 2021-11-16 23:26 UTC (permalink / raw)
To: Damien Le Moal
Cc: Yuji Nakao, linux-kernel, linux-pci, . Bjorn Helgaas,
Marc Zyngier, Arnd Bergmann, Sasha Levin
[+CC Arnd, Bjorn, Marc and Sasha for visibility]
Hello Damien and Yuji,
[...]
> > I'm using Arch Linux on MacBook Air 2010. I updated `linux` package[1]
> > from v5.14.16 to v5.15.2 the other day, and the boot process stalled
> > with the following message.
> >
> > ```shell
> > :: running early hook [udev]
> > Starting version 249.6-3-arch
> > :: running hook [udev]
> > :: Triggering uevents...
> > Waiting 10 seconds for device /dev/sda3 ...
> > ERROR: device '/dev/sda3' not found. Skipping fsck.
> > :: mounting '/dev/sda' on real root
> > mount: /new_root: no filesystem type specified.
> > You are now being dropped into an emergency shell.
> > sh: can't access tty; job control turned off
> > [rootfs ]#
> > ```
> >
> > In the emergency shell there's no `sda` devices when I type `$ ls
> > /dev/`. By downgrading the kernel, boot process works properly.
> >
> > See also Arch Linux bug tracker[2]. There are similar reports on
> > Apple devices.
> >
> > `dmesg` output in the emergency shell is attached. I guess this issue is
> > related to libata, so CCed to Damien Le Moal.
>
> I think that this problem is due to recent PCI subsystem changes which broke Mac
> support. The problem show up as the interrupts not being delivered, which in
> turn result in the kernel assuming that the drive is not working (see the
> timeout error messages in your dmesg output). Hence your boot drive detection
> fails and no rootfs to mount.
>
> Adding linux-pci list.
>
>
>
> >
> > Regards.
> >
> > [1] https://archlinux.org/packages/core/x86_64/linux/
> > [2] https://bugs.archlinux.org/task/72734
The error in the dmesg output (see [2] where the log file is attached)
looks similar to the problem reported a week or so ago, as per:
https://lore.kernel.org/linux-pci/ee3884db-da17-39e3-4010-bcc8f878e2f6@xenosoft.de/
The problematic commits where reverted by Bjorn and the Pull Request that
did it was accepted, as per:
https://lore.kernel.org/linux-pci/20211111195040.GA1345641@bhelgaas/
Thus, this would made its way into 5.16-rc1, I suppose. We might have to
back-port this to the stable and long-term kernels.
Yuji, could you, if you have some time to spare, try the 5.16-rc1 to see if
this have gotten better on your system?
Krzysztof
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel 5.15 doesn't detect SATA drive on boot
2021-11-16 23:26 ` Krzysztof Wilczyński
@ 2021-11-16 23:40 ` Damien Le Moal
2021-11-16 23:54 ` Krzysztof Wilczyński
2021-11-17 9:07 ` Marc Zyngier
1 sibling, 1 reply; 14+ messages in thread
From: Damien Le Moal @ 2021-11-16 23:40 UTC (permalink / raw)
To: Krzysztof Wilczyński
Cc: Yuji Nakao, linux-kernel, linux-pci, . Bjorn Helgaas,
Marc Zyngier, Arnd Bergmann, Sasha Levin
On 2021/11/17 8:26, Krzysztof Wilczyński wrote:
> [+CC Arnd, Bjorn, Marc and Sasha for visibility]
>
> Hello Damien and Yuji,
>
> [...]
>>> I'm using Arch Linux on MacBook Air 2010. I updated `linux` package[1]
>>> from v5.14.16 to v5.15.2 the other day, and the boot process stalled
>>> with the following message.
>>>
>>> ```shell
>>> :: running early hook [udev]
>>> Starting version 249.6-3-arch
>>> :: running hook [udev]
>>> :: Triggering uevents...
>>> Waiting 10 seconds for device /dev/sda3 ...
>>> ERROR: device '/dev/sda3' not found. Skipping fsck.
>>> :: mounting '/dev/sda' on real root
>>> mount: /new_root: no filesystem type specified.
>>> You are now being dropped into an emergency shell.
>>> sh: can't access tty; job control turned off
>>> [rootfs ]#
>>> ```
>>>
>>> In the emergency shell there's no `sda` devices when I type `$ ls
>>> /dev/`. By downgrading the kernel, boot process works properly.
>>>
>>> See also Arch Linux bug tracker[2]. There are similar reports on
>>> Apple devices.
>>>
>>> `dmesg` output in the emergency shell is attached. I guess this issue is
>>> related to libata, so CCed to Damien Le Moal.
>>
>> I think that this problem is due to recent PCI subsystem changes which broke Mac
>> support. The problem show up as the interrupts not being delivered, which in
>> turn result in the kernel assuming that the drive is not working (see the
>> timeout error messages in your dmesg output). Hence your boot drive detection
>> fails and no rootfs to mount.
>>
>> Adding linux-pci list.
>>
>>
>>
>>>
>>> Regards.
>>>
>>> [1] https://archlinux.org/packages/core/x86_64/linux/
>>> [2] https://bugs.archlinux.org/task/72734
>
Krzysztof,
> The error in the dmesg output (see [2] where the log file is attached)
> looks similar to the problem reported a week or so ago, as per:
>
> https://lore.kernel.org/linux-pci/ee3884db-da17-39e3-4010-bcc8f878e2f6@xenosoft.de/
Thanks. I searched this thread but could not find it in the archive.
Early morning, need more coffee :)
>
> The problematic commits where reverted by Bjorn and the Pull Request that
> did it was accepted, as per:
>
> https://lore.kernel.org/linux-pci/20211111195040.GA1345641@bhelgaas/
>
> Thus, this would made its way into 5.16-rc1, I suppose. We might have to
> back-port this to the stable and long-term kernels.
Yes, I think the fix needs to go in 5.15, which is latest stable and LTS.
>
> Yuji, could you, if you have some time to spare, try the 5.16-rc1 to see if
> this have gotten better on your system?
>
> Krzysztof
>
--
Damien Le Moal
Western Digital Research
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel 5.15 doesn't detect SATA drive on boot
2021-11-16 23:40 ` Damien Le Moal
@ 2021-11-16 23:54 ` Krzysztof Wilczyński
2021-11-17 16:24 ` Jeremy Soller
0 siblings, 1 reply; 14+ messages in thread
From: Krzysztof Wilczyński @ 2021-11-16 23:54 UTC (permalink / raw)
To: Damien Le Moal
Cc: Yuji Nakao, linux-kernel, linux-pci, . Bjorn Helgaas,
Marc Zyngier, Arnd Bergmann, Sasha Levin, Jeremy Soller
[+CC Adding Jeremy for visibility]
Hi Damien,
[...]
> > The error in the dmesg output (see [2] where the log file is attached)
> > looks similar to the problem reported a week or so ago, as per:
> >
> > https://lore.kernel.org/linux-pci/ee3884db-da17-39e3-4010-bcc8f878e2f6@xenosoft.de/
>
> Thanks. I searched this thread but could not find it in the archive.
> Early morning, need more coffee :)
No worries! Got you covered!
)))
(((
+-----+
| |]
`-----'
Enjoy!
>
> >
> > The problematic commits where reverted by Bjorn and the Pull Request that
> > did it was accepted, as per:
> >
> > https://lore.kernel.org/linux-pci/20211111195040.GA1345641@bhelgaas/
> >
> > Thus, this would made its way into 5.16-rc1, I suppose. We might have to
> > back-port this to the stable and long-term kernels.
>
> Yes, I think the fix needs to go in 5.15, which is latest stable and LTS.
On the plus side, not everyone is on 5.15 yet, but those who are using it would
have some issues. Albeit, with it being an LTS release, the adoption might
increase rapidly.
For instance, I believe that Pop!_OS already ships kernels that are very close
to the upstream, which would hit their current user base.
Krzysztof
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel 5.15 doesn't detect SATA drive on boot
2021-11-16 23:26 ` Krzysztof Wilczyński
2021-11-16 23:40 ` Damien Le Moal
@ 2021-11-17 9:07 ` Marc Zyngier
2021-11-17 9:36 ` Krzysztof Wilczyński
2021-11-17 13:52 ` Yuji Nakao
1 sibling, 2 replies; 14+ messages in thread
From: Marc Zyngier @ 2021-11-17 9:07 UTC (permalink / raw)
To: Krzysztof Wilczyński, Yuji Nakao
Cc: Damien Le Moal, linux-kernel, linux-pci, . Bjorn Helgaas,
Arnd Bergmann, Sasha Levin
Hi Krzysztof, Yugi,
On Tue, 16 Nov 2021 23:26:18 +0000,
Krzysztof Wilczyński <kw@linux.com> wrote:
>
> [+CC Arnd, Bjorn, Marc and Sasha for visibility]
>
> Hello Damien and Yuji,
>
> [...]
> > > I'm using Arch Linux on MacBook Air 2010. I updated `linux` package[1]
> > > from v5.14.16 to v5.15.2 the other day, and the boot process stalled
> > > with the following message.
> > >
> > > ```shell
> > > :: running early hook [udev]
> > > Starting version 249.6-3-arch
> > > :: running hook [udev]
> > > :: Triggering uevents...
> > > Waiting 10 seconds for device /dev/sda3 ...
> > > ERROR: device '/dev/sda3' not found. Skipping fsck.
> > > :: mounting '/dev/sda' on real root
> > > mount: /new_root: no filesystem type specified.
> > > You are now being dropped into an emergency shell.
> > > sh: can't access tty; job control turned off
> > > [rootfs ]#
> > > ```
> > >
> > > In the emergency shell there's no `sda` devices when I type `$ ls
> > > /dev/`. By downgrading the kernel, boot process works properly.
> > >
> > > See also Arch Linux bug tracker[2]. There are similar reports on
> > > Apple devices.
> > >
> > > `dmesg` output in the emergency shell is attached. I guess this issue is
> > > related to libata, so CCed to Damien Le Moal.
> >
> > I think that this problem is due to recent PCI subsystem changes which broke Mac
> > support. The problem show up as the interrupts not being delivered, which in
> > turn result in the kernel assuming that the drive is not working (see the
> > timeout error messages in your dmesg output). Hence your boot drive detection
> > fails and no rootfs to mount.
> >
> > Adding linux-pci list.
> >
> >
> >
> > >
> > > Regards.
> > >
> > > [1] https://archlinux.org/packages/core/x86_64/linux/
> > > [2] https://bugs.archlinux.org/task/72734
>
> The error in the dmesg output (see [2] where the log file is attached)
> looks similar to the problem reported a week or so ago, as per:
>
> https://lore.kernel.org/linux-pci/ee3884db-da17-39e3-4010-bcc8f878e2f6@xenosoft.de/
>
> The problematic commits where reverted by Bjorn and the Pull Request that
> did it was accepted, as per:
>
> https://lore.kernel.org/linux-pci/20211111195040.GA1345641@bhelgaas/
>
> Thus, this would made its way into 5.16-rc1, I suppose. We might have to
> back-port this to the stable and long-term kernels.
>
> Yuji, could you, if you have some time to spare, try the 5.16-rc1 to see if
> this have gotten better on your system?
I'm afraid you have the wrong end of the stick on this one.
The issue is reported on 5.15, and the issue you are pointing at was
introduced during the 5.16 merge window. The problematic commit wasn't
reverted, but instead fixed in 10a20b34d735 ("of/irq: Don't ignore
interrupt-controller when interrupt-map failed").
The issue is instead very close to the one reported at [1], for which
we have a very conservative workaround in 5.16-rc1 (commits
2226667a145d and f21082fb20db). Looking at the dmesg log provided by
Yugi, you find the following nugget:
[ 0.378564] pci 0000:00:0a.0: [10de:0d88] type 00 class 0x010601
Oh look, a NVIDIA AHCI controller, probably similar enough to the one
discussed in the issue reported by Rui.
Yugi, could you please test the patch below on top of 5.16-rc1?
Thanks,
M.
[1] https://lore.kernel.org/r/CALjTZvbzYfBuLB+H=fj2J+9=DxjQ2Uqcy0if_PvmJ-nU-qEgkg@mail.gmail.com
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 003950c738d2..cd88eddf614d 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5857,3 +5857,4 @@ static void nvidia_ion_ahci_fixup(struct pci_dev *pdev)
pdev->dev_flags |= PCI_DEV_FLAGS_HAS_MSI_MASKING;
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0ab8, nvidia_ion_ahci_fixup);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0d88, nvidia_ion_ahci_fixup);
--
Without deviation from the norm, progress is not possible.
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: Kernel 5.15 doesn't detect SATA drive on boot
2021-11-17 9:07 ` Marc Zyngier
@ 2021-11-17 9:36 ` Krzysztof Wilczyński
2021-11-21 15:41 ` Maxym Synytsky
2021-11-17 13:52 ` Yuji Nakao
1 sibling, 1 reply; 14+ messages in thread
From: Krzysztof Wilczyński @ 2021-11-17 9:36 UTC (permalink / raw)
To: Marc Zyngier
Cc: Yuji Nakao, Damien Le Moal, linux-kernel, linux-pci,
. Bjorn Helgaas, Arnd Bergmann, Sasha Levin
Hi Marc,
[...]
> > > I think that this problem is due to recent PCI subsystem changes which broke Mac
> > > support. The problem show up as the interrupts not being delivered, which in
> > > turn result in the kernel assuming that the drive is not working (see the
> > > timeout error messages in your dmesg output). Hence your boot drive detection
> > > fails and no rootfs to mount.
> > >
> > > Adding linux-pci list.
> > >
> > >
> > >
> > > >
> > > > Regards.
> > > >
> > > > [1] https://archlinux.org/packages/core/x86_64/linux/
> > > > [2] https://bugs.archlinux.org/task/72734
> >
> > The error in the dmesg output (see [2] where the log file is attached)
> > looks similar to the problem reported a week or so ago, as per:
> >
> > https://lore.kernel.org/linux-pci/ee3884db-da17-39e3-4010-bcc8f878e2f6@xenosoft.de/
> >
> > The problematic commits where reverted by Bjorn and the Pull Request that
> > did it was accepted, as per:
> >
> > https://lore.kernel.org/linux-pci/20211111195040.GA1345641@bhelgaas/
> >
> > Thus, this would made its way into 5.16-rc1, I suppose. We might have to
> > back-port this to the stable and long-term kernels.
> >
> > Yuji, could you, if you have some time to spare, try the 5.16-rc1 to see if
> > this have gotten better on your system?
>
> I'm afraid you have the wrong end of the stick on this one.
>
> The issue is reported on 5.15, and the issue you are pointing at was
> introduced during the 5.16 merge window. The problematic commit wasn't
> reverted, but instead fixed in 10a20b34d735 ("of/irq: Don't ignore
> interrupt-controller when interrupt-map failed").
Ahh. My bad! I missed the conclusion of the conversation involving the
Nemo board and the patch you proposed here:
https://lore.kernel.org/linux-pci/87mtma8udh.wl-maz@kernel.org/
I then assumed that what Bjorn reverted in his Pull Request was the
solution to the reported problems. Apologies for conflating the issues
here, and also thank you for all the details.
Are we still in need to back-port some of the fixes to the stable and LTS
kernels then? I am just making sure that things will make it there, if
needed.
> The issue is instead very close to the one reported at [1], for which
> we have a very conservative workaround in 5.16-rc1 (commits
> 2226667a145d and f21082fb20db). Looking at the dmesg log provided by
> Yugi, you find the following nugget:
>
> [ 0.378564] pci 0000:00:0a.0: [10de:0d88] type 00 class 0x010601
>
> Oh look, a NVIDIA AHCI controller, probably similar enough to the one
> discussed in the issue reported by Rui.
Good to know for the future reference that these can be problematic.
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 003950c738d2..cd88eddf614d 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -5857,3 +5857,4 @@ static void nvidia_ion_ahci_fixup(struct pci_dev *pdev)
> pdev->dev_flags |= PCI_DEV_FLAGS_HAS_MSI_MASKING;
> }
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0ab8, nvidia_ion_ahci_fixup);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0d88, nvidia_ion_ahci_fixup);
Thank you! I hope this will fix Yuji's issues.
Krzysztof
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel 5.15 doesn't detect SATA drive on boot
2021-11-17 9:07 ` Marc Zyngier
2021-11-17 9:36 ` Krzysztof Wilczyński
@ 2021-11-17 13:52 ` Yuji Nakao
2021-11-17 14:20 ` Marc Zyngier
1 sibling, 1 reply; 14+ messages in thread
From: Yuji Nakao @ 2021-11-17 13:52 UTC (permalink / raw)
To: Marc Zyngier, Krzysztof Wilczyński
Cc: Damien Le Moal, linux-kernel, linux-pci, . Bjorn Helgaas,
Arnd Bergmann, Sasha Levin
[-- Attachment #1: Type: text/plain, Size: 4632 bytes --]
Marc Zyngier <maz@kernel.org> writes:
> Hi Krzysztof, Yugi,
>
> On Tue, 16 Nov 2021 23:26:18 +0000,
> Krzysztof Wilczyński <kw@linux.com> wrote:
>>
>> [+CC Arnd, Bjorn, Marc and Sasha for visibility]
>>
>> Hello Damien and Yuji,
>>
>> [...]
>> > > I'm using Arch Linux on MacBook Air 2010. I updated `linux` package[1]
>> > > from v5.14.16 to v5.15.2 the other day, and the boot process stalled
>> > > with the following message.
>> > >
>> > > ```shell
>> > > :: running early hook [udev]
>> > > Starting version 249.6-3-arch
>> > > :: running hook [udev]
>> > > :: Triggering uevents...
>> > > Waiting 10 seconds for device /dev/sda3 ...
>> > > ERROR: device '/dev/sda3' not found. Skipping fsck.
>> > > :: mounting '/dev/sda' on real root
>> > > mount: /new_root: no filesystem type specified.
>> > > You are now being dropped into an emergency shell.
>> > > sh: can't access tty; job control turned off
>> > > [rootfs ]#
>> > > ```
>> > >
>> > > In the emergency shell there's no `sda` devices when I type `$ ls
>> > > /dev/`. By downgrading the kernel, boot process works properly.
>> > >
>> > > See also Arch Linux bug tracker[2]. There are similar reports on
>> > > Apple devices.
>> > >
>> > > `dmesg` output in the emergency shell is attached. I guess this issue is
>> > > related to libata, so CCed to Damien Le Moal.
>> >
>> > I think that this problem is due to recent PCI subsystem changes which broke Mac
>> > support. The problem show up as the interrupts not being delivered, which in
>> > turn result in the kernel assuming that the drive is not working (see the
>> > timeout error messages in your dmesg output). Hence your boot drive detection
>> > fails and no rootfs to mount.
>> >
>> > Adding linux-pci list.
>> >
>> >
>> >
>> > >
>> > > Regards.
>> > >
>> > > [1] https://archlinux.org/packages/core/x86_64/linux/
>> > > [2] https://bugs.archlinux.org/task/72734
>>
>> The error in the dmesg output (see [2] where the log file is attached)
>> looks similar to the problem reported a week or so ago, as per:
>>
>> https://lore.kernel.org/linux-pci/ee3884db-da17-39e3-4010-bcc8f878e2f6@xenosoft.de/
>>
>> The problematic commits where reverted by Bjorn and the Pull Request that
>> did it was accepted, as per:
>>
>> https://lore.kernel.org/linux-pci/20211111195040.GA1345641@bhelgaas/
>>
>> Thus, this would made its way into 5.16-rc1, I suppose. We might have to
>> back-port this to the stable and long-term kernels.
>>
>> Yuji, could you, if you have some time to spare, try the 5.16-rc1 to see if
>> this have gotten better on your system?
>
> I'm afraid you have the wrong end of the stick on this one.
>
> The issue is reported on 5.15, and the issue you are pointing at was
> introduced during the 5.16 merge window. The problematic commit wasn't
> reverted, but instead fixed in 10a20b34d735 ("of/irq: Don't ignore
> interrupt-controller when interrupt-map failed").
>
> The issue is instead very close to the one reported at [1], for which
> we have a very conservative workaround in 5.16-rc1 (commits
> 2226667a145d and f21082fb20db). Looking at the dmesg log provided by
> Yugi, you find the following nugget:
>
> [ 0.378564] pci 0000:00:0a.0: [10de:0d88] type 00 class 0x010601
>
> Oh look, a NVIDIA AHCI controller, probably similar enough to the one
> discussed in the issue reported by Rui.
>
> Yugi, could you please test the patch below on top of 5.16-rc1?
>
> Thanks,
>
> M.
>
> [1] https://lore.kernel.org/r/CALjTZvbzYfBuLB+H=fj2J+9=DxjQ2Uqcy0if_PvmJ-nU-qEgkg@mail.gmail.com
>
>
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 003950c738d2..cd88eddf614d 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -5857,3 +5857,4 @@ static void nvidia_ion_ahci_fixup(struct pci_dev *pdev)
> pdev->dev_flags |= PCI_DEV_FLAGS_HAS_MSI_MASKING;
> }
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0ab8, nvidia_ion_ahci_fixup);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0d88, nvidia_ion_ahci_fixup);
>
> --
> Without deviation from the norm, progress is not possible.
I installed plane 5.16-rc1 using pre-built image[1] by linux-mainline
aur package[2] maintainer and 5.16-rc1 with the patch provided from
Mark. Both versions succeeded to boot. Thank you for quick
investigation. I'll wait for backporting the fix.
[1] https://wiki.archlinux.org/title/Unofficial_user_repositories#miffe
[2] https://aur.archlinux.org/packages/linux-mainline/
For the record, I attach each dmesg log.
5.16-rc1 dmesg
[-- Attachment #2: dmesg_v5.16-rc1.log --]
[-- Type: text/plain, Size: 72796 bytes --]
[ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.000000] Linux version 5.16.0-rc1-1-mainline (linux-mainline@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Sun, 14 Nov 2021 23:35:58 +0000
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux-mainline.img root=/dev/sda3 rw ipv6.disable=1
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] signal: max sigframe size: 1520
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006f000000-0x000000007effffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f000000-0x000000007f718fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f719000-0x000000007f938fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f939000-0x000000007f953fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f954000-0x000000007f96afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f96b000-0x000000007f96efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f96f000-0x000000007f99afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f99b000-0x000000007f9affff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f9b0000-0x000000007f9dafff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f9db000-0x000000007fef8fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fef9000-0x000000007fefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000093200000-0x0000000093200fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x6e8da018-0x6e8e8c57] usable ==> usable
[ 0.000000] e820: update [mem 0x6e8da018-0x6e8e8c57] usable ==> usable
[ 0.000000] e820: update [mem 0x6e8d9018-0x6e8d9984] usable ==> usable
[ 0.000000] e820: update [mem 0x6e8d9018-0x6e8d9984] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000006e8d9017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006e8d9018-0x000000006e8d9984] usable
[ 0.000000] reserve setup_data: [mem 0x000000006e8d9985-0x000000006e8da017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006e8da018-0x000000006e8e8c57] usable
[ 0.000000] reserve setup_data: [mem 0x000000006e8e8c58-0x000000006effffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006f000000-0x000000007effffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007f000000-0x000000007f718fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007f719000-0x000000007f938fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000007f939000-0x000000007f953fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007f954000-0x000000007f96afff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000007f96b000-0x000000007f96efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007f96f000-0x000000007f99afff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007f99b000-0x000000007f9affff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007f9b0000-0x000000007f9dafff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007f9db000-0x000000007fef8fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007fef9000-0x000000007fefffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000093200000-0x0000000093200fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] efi: EFI v1.10 by Apple
[ 0.000000] efi: ACPI=0x7f96a000 ACPI 2.0=0x7f96a014 SMBIOS=0x7f71a000
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBookAir3,1/Mac-942452F5819B1C1B, BIOS MBA31.88Z.0061.B07.1201241641 01/24/12
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1397.150 MHz processor
[ 0.000027] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000035] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000053] last_pfn = 0x7fef9 max_arch_pfn = 0x400000000
[ 0.001560] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.030088] Secure boot disabled
[ 0.030095] RAMDISK: [mem 0x67e98000-0x68ae5fff]
[ 0.030108] ACPI: Early table checksum verification disabled
[ 0.030116] ACPI: RSDP 0x000000007F96A014 000024 (v02 APPLE )
[ 0.030127] ACPI: XSDT 0x000000007F96A1C0 000084 (v01 APPLE Apple00 00000061 01000013)
[ 0.030143] ACPI: FACP 0x000000007F968000 0000F4 (v04 APPLE Apple00 00000061 Loki 0000005F)
[ 0.030158] ACPI: DSDT 0x000000007F95B000 00572C (v01 APPLE MacBookA 00030001 INTL 20061109)
[ 0.030169] ACPI: FACS 0x000000007F71E000 000040
[ 0.030177] ACPI: FACS 0x000000007F71E000 000040
[ 0.030186] ACPI: HPET 0x000000007F967000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.030196] ACPI: APIC 0x000000007F966000 000068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.030206] ACPI: APIC 0x000000007F965000 000068 (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.030216] ACPI: ASF! 0x000000007F963000 0000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.030226] ACPI: SBST 0x000000007F962000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.030236] ACPI: ECDT 0x000000007F961000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.030245] ACPI: SSDT 0x000000007F958000 000107 (v01 APPLE SataAhci 00001000 INTL 20061109)
[ 0.030255] ACPI: SSDT 0x000000007F957000 000024 (v01 APPLE Apple 00001000 INTL 20061109)
[ 0.030265] ACPI: SSDT 0x000000007F955000 00008A (v01 APPLE NoSDCard 00001000 INTL 20061109)
[ 0.030275] ACPI: SSDT 0x000000007F954000 0004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.030284] ACPI: MCFG 0x000000007F964000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.030292] ACPI: Reserving FACP table memory at [mem 0x7f968000-0x7f9680f3]
[ 0.030297] ACPI: Reserving DSDT table memory at [mem 0x7f95b000-0x7f96072b]
[ 0.030300] ACPI: Reserving FACS table memory at [mem 0x7f71e000-0x7f71e03f]
[ 0.030303] ACPI: Reserving FACS table memory at [mem 0x7f71e000-0x7f71e03f]
[ 0.030306] ACPI: Reserving HPET table memory at [mem 0x7f967000-0x7f967037]
[ 0.030310] ACPI: Reserving APIC table memory at [mem 0x7f966000-0x7f966067]
[ 0.030313] ACPI: Reserving APIC table memory at [mem 0x7f965000-0x7f965067]
[ 0.030316] ACPI: Reserving ASF! table memory at [mem 0x7f963000-0x7f9630a4]
[ 0.030319] ACPI: Reserving SBST table memory at [mem 0x7f962000-0x7f96202f]
[ 0.030322] ACPI: Reserving ECDT table memory at [mem 0x7f961000-0x7f961052]
[ 0.030325] ACPI: Reserving SSDT table memory at [mem 0x7f958000-0x7f958106]
[ 0.030328] ACPI: Reserving SSDT table memory at [mem 0x7f957000-0x7f957023]
[ 0.030331] ACPI: Reserving SSDT table memory at [mem 0x7f955000-0x7f955089]
[ 0.030334] ACPI: Reserving SSDT table memory at [mem 0x7f954000-0x7f9544db]
[ 0.030338] ACPI: Reserving MCFG table memory at [mem 0x7f964000-0x7f96403b]
[ 0.030346] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.030348] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.030360] ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware
[ 0.030458] No NUMA configuration found
[ 0.030460] Faking a node at [mem 0x0000000000000000-0x000000007fef8fff]
[ 0.030470] NODE_DATA(0) allocated [mem 0x7fef5000-0x7fef8fff]
[ 0.030524] Zone ranges:
[ 0.030526] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.030532] DMA32 [mem 0x0000000001000000-0x000000007fef8fff]
[ 0.030536] Normal empty
[ 0.030540] Device empty
[ 0.030543] Movable zone start for each node
[ 0.030545] Early memory node ranges
[ 0.030546] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.030550] node 0: [mem 0x0000000000090000-0x000000000009ffff]
[ 0.030553] node 0: [mem 0x0000000000100000-0x000000006effffff]
[ 0.030557] node 0: [mem 0x000000007f000000-0x000000007f718fff]
[ 0.030560] node 0: [mem 0x000000007f939000-0x000000007f953fff]
[ 0.030563] node 0: [mem 0x000000007f96b000-0x000000007f96efff]
[ 0.030566] node 0: [mem 0x000000007f99b000-0x000000007f9affff]
[ 0.030569] node 0: [mem 0x000000007f9db000-0x000000007fef8fff]
[ 0.030573] Initmem setup node 0 [mem 0x0000000000001000-0x000000007fef8fff]
[ 0.030585] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.030589] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.030665] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.048743] On node 0, zone DMA32: 32768 pages in unavailable ranges
[ 0.048773] On node 0, zone DMA32: 544 pages in unavailable ranges
[ 0.048778] On node 0, zone DMA32: 23 pages in unavailable ranges
[ 0.048783] On node 0, zone DMA32: 44 pages in unavailable ranges
[ 0.048839] On node 0, zone DMA32: 43 pages in unavailable ranges
[ 0.048852] On node 0, zone DMA32: 263 pages in unavailable ranges
[ 0.049183] ACPI: PM-Timer IO Port: 0x408
[ 0.049203] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.049209] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.049228] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.049236] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.049241] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.049251] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.049254] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.049268] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.049324] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.049330] PM: hibernation: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.049336] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.049341] PM: hibernation: Registered nosave memory: [mem 0x6e8d9000-0x6e8d9fff]
[ 0.049346] PM: hibernation: Registered nosave memory: [mem 0x6e8d9000-0x6e8d9fff]
[ 0.049349] PM: hibernation: Registered nosave memory: [mem 0x6e8da000-0x6e8dafff]
[ 0.049354] PM: hibernation: Registered nosave memory: [mem 0x6e8e8000-0x6e8e8fff]
[ 0.049359] PM: hibernation: Registered nosave memory: [mem 0x6f000000-0x7effffff]
[ 0.049365] PM: hibernation: Registered nosave memory: [mem 0x7f719000-0x7f938fff]
[ 0.049371] PM: hibernation: Registered nosave memory: [mem 0x7f954000-0x7f96afff]
[ 0.049377] PM: hibernation: Registered nosave memory: [mem 0x7f96f000-0x7f99afff]
[ 0.049382] PM: hibernation: Registered nosave memory: [mem 0x7f9b0000-0x7f9dafff]
[ 0.049387] [mem 0x93201000-0xffbfffff] available for PCI devices
[ 0.049392] Booting paravirtualized kernel on bare hardware
[ 0.049399] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.067013] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:2 nr_node_ids:1
[ 0.067934] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u1048576
[ 0.067955] pcpu-alloc: s212992 r8192 d28672 u1048576 alloc=1*2097152
[ 0.067962] pcpu-alloc: [0] 0 1
[ 0.068024] Fallback order for Node 0: 0
[ 0.068033] Built 1 zonelists, mobility grouping on. Total pages: 450425
[ 0.068037] Policy zone: DMA32
[ 0.068041] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-mainline.img root=/dev/sda3 rw ipv6.disable=1
[ 0.069024] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.069482] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.070540] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[ 0.092125] Memory: 1692676K/1830948K available (16392K kernel code, 2075K rwdata, 10900K rodata, 1796K init, 3840K bss, 138012K reserved, 0K cma-reserved)
[ 0.092147] random: get_random_u64 called from __kmem_cache_create+0x2a/0x560 with crng_init=0
[ 0.092541] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.092580] Kernel/User page tables isolation: enabled
[ 0.092630] ftrace: allocating 44896 entries in 176 pages
[ 0.132654] ftrace: allocated 176 pages with 3 groups
[ 0.132914] Dynamic Preempt: full
[ 0.132978] rcu: Preemptible hierarchical RCU implementation.
[ 0.132980] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.132982] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2.
[ 0.132986] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.132989] Trampoline variant of Tasks RCU enabled.
[ 0.132990] Rude variant of Tasks RCU enabled.
[ 0.132992] Tracing variant of Tasks RCU enabled.
[ 0.132994] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.132997] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.144349] NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16
[ 0.144879] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.144978] spurious 8259A interrupt: IRQ7.
[ 0.145017] Console: colour dummy device 80x25
[ 0.145057] printk: console [tty0] enabled
[ 0.145110] ACPI: Core revision 20210930
[ 0.145333] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.145359] APIC: Switch to symmetric I/O mode setup
[ 0.145881] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.162027] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x14239c11e51, max_idle_ns: 440795262321 ns
[ 0.162039] Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.72 BogoMIPS (lpj=4657166)
[ 0.162046] pid_max: default: 32768 minimum: 301
[ 0.190708] LSM: Security Framework initializing
[ 0.190732] landlock: Up and running.
[ 0.190736] Yama: becoming mindful.
[ 0.190757] LSM support for eBPF active
[ 0.190800] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.190821] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.191465] CPU0: Thermal monitoring enabled (TM2)
[ 0.191489] process: using mwait in idle threads
[ 0.191495] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.191499] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.191509] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.191513] Spectre V2 : Mitigation: Full generic retpoline
[ 0.191516] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.191518] Speculative Store Bypass: Vulnerable
[ 0.191524] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.197412] Freeing SMP alternatives memory: 36K
[ 0.304571] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU U9400 @ 1.40GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.305100] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.305137] ... version: 2
[ 0.305140] ... bit width: 40
[ 0.305142] ... generic registers: 2
[ 0.305144] ... value mask: 000000ffffffffff
[ 0.305147] ... max period: 000000007fffffff
[ 0.305150] ... fixed-purpose events: 3
[ 0.305152] ... event mask: 0000000700000003
[ 0.305368] rcu: Hierarchical SRCU implementation.
[ 0.305368] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.305368] smp: Bringing up secondary CPUs ...
[ 0.305368] x86: Booting SMP configuration:
[ 0.305368] .... node #0, CPUs: #1
[ 0.314120] smp: Brought up 1 node, 2 CPUs
[ 0.314120] smpboot: Max logical packages: 1
[ 0.314120] smpboot: Total of 2 processors activated (5590.45 BogoMIPS)
[ 0.318953] devtmpfs: initialized
[ 0.318953] x86/mm: Memory block size: 128MB
[ 0.319505] ACPI: PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.319505] ACPI: PM: Registering ACPI NVS region [mem 0x7f719000-0x7f938fff] (2228224 bytes)
[ 0.319505] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.319505] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.319505] pinctrl core: initialized pinctrl subsystem
[ 0.319505] PM: RTC time: 00:00:10, date: 2001-01-01
[ 0.319721] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.320033] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.320118] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.320201] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.320222] audit: initializing netlink subsys (disabled)
[ 0.320244] audit: type=2000 audit(978307210.173:1): state=initialized audit_enabled=0 res=1
[ 0.320244] thermal_sys: Registered thermal governor 'fair_share'
[ 0.320244] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.320244] thermal_sys: Registered thermal governor 'step_wise'
[ 0.320244] thermal_sys: Registered thermal governor 'user_space'
[ 0.320244] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.322071] cpuidle: using governor ladder
[ 0.322084] cpuidle: using governor menu
[ 0.322214] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.322218] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.322660] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
[ 0.322673] PCI: not using MMCONFIG
[ 0.322682] PCI: Using configuration type 1 for base access
[ 0.326879] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.326931] HugeTLB: can free 6 vmemmap pages for hugepages-2048kB
[ 0.326931] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.326931] ACPI: Disabled all _OSI OS vendors
[ 0.326931] ACPI: Added _OSI(Module Device)
[ 0.326931] ACPI: Added _OSI(Processor Device)
[ 0.326931] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.326931] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.326931] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.326931] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.326931] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.326931] ACPI: Added _OSI(Darwin)
[ 0.338225] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.339115] ACPI: EC: EC started
[ 0.339118] ACPI: EC: interrupt blocked
[ 0.342830] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.342835] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.343315] ACPI: BIOS _OSI(Darwin) query honored via DMI
[ 0.346228] ACPI: Dynamic OEM Table Load:
[ 0.346246] ACPI: SSDT 0xFFFF9E06011BC800 0001FB (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.349722] ACPI: Dynamic OEM Table Load:
[ 0.349739] ACPI: SSDT 0xFFFF9E060130D800 0005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.351817] ACPI: Dynamic OEM Table Load:
[ 0.351832] ACPI: SSDT 0xFFFF9E060134F600 0000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.352950] ACPI: Dynamic OEM Table Load:
[ 0.352963] ACPI: SSDT 0xFFFF9E060134CD80 000085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.354330] ACPI: Interpreter enabled
[ 0.354375] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.354379] ACPI: Using IOAPIC for interrupt routing
[ 0.354448] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
[ 0.355295] PCI: MMCONFIG at [mem 0xf0000000-0xf02fffff] reserved in ACPI motherboard resources
[ 0.355318] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.355913] ACPI: Enabled 7 GPEs in block 00 to 1F
[ 0.355930] ACPI: Enabled 2 GPEs in block 20 to 5F
[ 0.382492] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.382510] acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability LTR DPC]
[ 0.382536] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-02] only partially covers this bridge
[ 0.383211] PCI host bridge to bus 0000:00
[ 0.383217] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.383223] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.383227] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[ 0.383232] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.383237] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.383273] pci 0000:00:00.0: [10de:0d60] type 00 class 0x060000
[ 0.383583] pci 0000:00:00.1: [10de:0d68] type 00 class 0x050000
[ 0.383915] pci 0000:00:01.0: [10de:0d6d] type 00 class 0x050000
[ 0.384152] pci 0000:00:01.1: [10de:0d6e] type 00 class 0x050000
[ 0.384451] pci 0000:00:01.2: [10de:0d6f] type 00 class 0x050000
[ 0.384686] pci 0000:00:01.3: [10de:0d70] type 00 class 0x050000
[ 0.384925] pci 0000:00:02.0: [10de:0d71] type 00 class 0x050000
[ 0.385165] pci 0000:00:02.1: [10de:0d72] type 00 class 0x050000
[ 0.385407] pci 0000:00:03.0: [10de:0d80] type 00 class 0x060100
[ 0.385426] pci 0000:00:03.0: reg 0x10: [io 0x2100-0x21ff]
[ 0.385636] pci 0000:00:03.1: [10de:0d7b] type 00 class 0x050000
[ 0.385886] pci 0000:00:03.2: [10de:0d79] type 00 class 0x0c0500
[ 0.385905] pci 0000:00:03.2: reg 0x10: [io 0x2000-0x20ff]
[ 0.385917] pci 0000:00:03.2: reg 0x14: [mem 0x93286000-0x93287fff]
[ 0.385942] pci 0000:00:03.2: reg 0x20: [io 0x2240-0x227f]
[ 0.385953] pci 0000:00:03.2: reg 0x24: [io 0x2200-0x223f]
[ 0.386007] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.386203] pci 0000:00:03.3: [10de:0d69] type 00 class 0x050000
[ 0.386475] pci 0000:00:03.4: [10de:0d7a] type 00 class 0x0b4000
[ 0.386511] pci 0000:00:03.4: reg 0x10: [mem 0x93200000-0x9327ffff]
[ 0.386823] pci 0000:00:04.0: [10de:0d9c] type 00 class 0x0c0310
[ 0.386842] pci 0000:00:04.0: reg 0x10: [mem 0x9328a000-0x9328afff]
[ 0.386922] pci 0000:00:04.0: supports D1 D2
[ 0.386926] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.387832] pci 0000:00:04.1: [10de:0d9d] type 00 class 0x0c0320
[ 0.387853] pci 0000:00:04.1: reg 0x10: [mem 0x9328b100-0x9328b1ff]
[ 0.387941] pci 0000:00:04.1: supports D1 D2
[ 0.387945] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.389052] pci 0000:00:06.0: [10de:0d9c] type 00 class 0x0c0310
[ 0.389073] pci 0000:00:06.0: reg 0x10: [mem 0x93289000-0x93289fff]
[ 0.389154] pci 0000:00:06.0: supports D1 D2
[ 0.389158] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.390059] pci 0000:00:06.1: [10de:0d9d] type 00 class 0x0c0320
[ 0.390079] pci 0000:00:06.1: reg 0x10: [mem 0x9328b000-0x9328b0ff]
[ 0.390167] pci 0000:00:06.1: supports D1 D2
[ 0.390171] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.391254] pci 0000:00:08.0: [10de:0d94] type 00 class 0x040300
[ 0.391272] pci 0000:00:08.0: reg 0x10: [mem 0x93280000-0x93283fff]
[ 0.391351] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.391799] pci 0000:00:0a.0: [10de:0d88] type 00 class 0x010601
[ 0.391817] pci 0000:00:0a.0: reg 0x10: [io 0x2298-0x229f]
[ 0.391828] pci 0000:00:0a.0: reg 0x14: [io 0x22a4-0x22a7]
[ 0.391838] pci 0000:00:0a.0: reg 0x18: [io 0x2290-0x2297]
[ 0.391848] pci 0000:00:0a.0: reg 0x1c: [io 0x22a0-0x22a3]
[ 0.391858] pci 0000:00:0a.0: reg 0x20: [io 0x2280-0x228f]
[ 0.391868] pci 0000:00:0a.0: reg 0x24: [mem 0x93284000-0x93285fff]
[ 0.392833] pci 0000:00:0b.0: [10de:0d75] type 00 class 0x050000
[ 0.392851] pci 0000:00:0b.0: reg 0x10: [mem 0x93288000-0x93288fff]
[ 0.393076] pci 0000:00:15.0: [10de:0d9b] type 01 class 0x060400
[ 0.393226] pci 0000:00:15.0: enabling Extended Tags
[ 0.393417] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.393676] pci 0000:00:17.0: [10de:0d76] type 01 class 0x060400
[ 0.393751] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
[ 0.394169] pci 0000:01:00.0: [14e4:4353] type 00 class 0x028000
[ 0.394202] pci 0000:01:00.0: reg 0x10: [mem 0x93100000-0x93103fff 64bit]
[ 0.394273] pci 0000:01:00.0: enabling Extended Tags
[ 0.394373] pci 0000:01:00.0: supports D1 D2
[ 0.394377] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.394637] pci 0000:00:15.0: PCI bridge to [bus 01]
[ 0.394665] pci 0000:00:15.0: bridge window [mem 0x93100000-0x931fffff]
[ 0.394709] pci_bus 0000:02: extended config space not accessible
[ 0.394779] pci 0000:02:00.0: [10de:08a2] type 00 class 0x030000
[ 0.394796] pci 0000:02:00.0: reg 0x10: [mem 0x92000000-0x92ffffff]
[ 0.394810] pci 0000:02:00.0: reg 0x14: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.394824] pci 0000:02:00.0: reg 0x1c: [mem 0x90000000-0x91ffffff 64bit pref]
[ 0.394834] pci 0000:02:00.0: reg 0x24: [io 0x1000-0x107f]
[ 0.394844] pci 0000:02:00.0: reg 0x30: [mem 0x93000000-0x9301ffff pref]
[ 0.394865] pci 0000:02:00.0: Enabling HDA controller
[ 0.394871] pci 0000:02:00.0: BAR 1: assigned to efifb
[ 0.396937] pci 0000:00:17.0: PCI bridge to [bus 02]
[ 0.396947] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
[ 0.396953] pci 0000:00:17.0: bridge window [mem 0x92000000-0x930fffff]
[ 0.396960] pci 0000:00:17.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.398065] ACPI: PCI: Interrupt link LNK1 configured for IRQ 16
[ 0.398425] ACPI: PCI: Interrupt link LNK2 configured for IRQ 17
[ 0.398793] ACPI: PCI: Interrupt link LNK3 configured for IRQ 18
[ 0.399151] ACPI: PCI: Interrupt link LNK4 configured for IRQ 19
[ 0.399509] ACPI: PCI: Interrupt link Z00J configured for IRQ 21
[ 0.399868] ACPI: PCI: Interrupt link Z00K configured for IRQ 21
[ 0.400225] ACPI: PCI: Interrupt link Z00L configured for IRQ 21
[ 0.400582] ACPI: PCI: Interrupt link Z00M configured for IRQ 21
[ 0.400939] ACPI: PCI: Interrupt link LSMB configured for IRQ 22
[ 0.401294] ACPI: PCI: Interrupt link LUS0 configured for IRQ 17
[ 0.401650] ACPI: PCI: Interrupt link LUS2 configured for IRQ 17
[ 0.402008] ACPI: PCI: Interrupt link LMAC configured for IRQ 17
[ 0.402375] ACPI: PCI: Interrupt link LAZA configured for IRQ 20
[ 0.402730] ACPI: PCI: Interrupt link LGPU configured for IRQ 16
[ 0.403078] ACPI: PCI: Interrupt link LPID configured for IRQ 0
[ 0.403082] ACPI: PCI: Interrupt link LPID disabled
[ 0.403436] ACPI: PCI: Interrupt link LSI0 configured for IRQ 18
[ 0.403792] ACPI: PCI: Interrupt link Z000 configured for IRQ 18
[ 0.404148] ACPI: PCI: Interrupt link Z001 configured for IRQ 22
[ 0.404494] ACPI: PCI: Interrupt link LPMU configured for IRQ 0
[ 0.404498] ACPI: PCI: Interrupt link LPMU disabled
[ 0.405145] ACPI: EC: interrupt unblocked
[ 0.405149] ACPI: EC: event unblocked
[ 0.405158] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.405162] ACPI: EC: GPE=0x57
[ 0.405166] ACPI: \_SB_.PCI0.LPCB.EC__: Boot ECDT EC initialization complete
[ 0.405171] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[ 0.405326] iommu: Default domain type: Translated
[ 0.405330] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.405412] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.405412] pci 0000:02:00.0: vgaarb: bridge control possible
[ 0.405412] pci 0000:02:00.0: vgaarb: setting as boot device
[ 0.405412] vgaarb: loaded
[ 0.405890] SCSI subsystem initialized
[ 0.405914] libata version 3.00 loaded.
[ 0.405914] ACPI: bus type USB registered
[ 0.405914] usbcore: registered new interface driver usbfs
[ 0.405914] usbcore: registered new interface driver hub
[ 0.405914] usbcore: registered new device driver usb
[ 0.405914] pps_core: LinuxPPS API ver. 1 registered
[ 0.405914] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.405914] PTP clock support registered
[ 0.405914] EDAC MC: Ver: 3.0.0
[ 0.405914] Registered efivars operations
[ 0.405914] NetLabel: Initializing
[ 0.405914] NetLabel: domain hash size = 128
[ 0.405914] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.405914] NetLabel: unlabeled traffic allowed by default
[ 0.405914] PCI: Using ACPI for IRQ routing
[ 0.405914] PCI: pci_cache_line_size set to 64 bytes
[ 0.405968] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.405973] e820: reserve RAM buffer [mem 0x6e8d9018-0x6fffffff]
[ 0.405977] e820: reserve RAM buffer [mem 0x6e8da018-0x6fffffff]
[ 0.405981] e820: reserve RAM buffer [mem 0x6f000000-0x6fffffff]
[ 0.405984] e820: reserve RAM buffer [mem 0x7f719000-0x7fffffff]
[ 0.405988] e820: reserve RAM buffer [mem 0x7f954000-0x7fffffff]
[ 0.405993] e820: reserve RAM buffer [mem 0x7f96f000-0x7fffffff]
[ 0.405997] e820: reserve RAM buffer [mem 0x7f9b0000-0x7fffffff]
[ 0.406000] e820: reserve RAM buffer [mem 0x7fef9000-0x7fffffff]
[ 0.410253] hpet: 4 channels of 0 reserved for per-cpu timers
[ 0.410264] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.410277] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.412223] clocksource: Switched to clocksource tsc-early
[ 0.440642] VFS: Disk quotas dquot_6.6.0
[ 0.440686] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.440840] pnp: PnP ACPI init
[ 0.441175] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.441639] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.442054] system 00:02: [io 0x0400-0x047f] has been reserved
[ 0.442061] system 00:02: [io 0x0480-0x04ff] has been reserved
[ 0.442066] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.442075] system 00:02: [io 0x0580-0x05ff] has been reserved
[ 0.442080] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.442084] system 00:02: [io 0x0880-0x08ff] has been reserved
[ 0.442090] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.442095] system 00:02: [io 0x0295-0x0296] has been reserved
[ 0.443355] pnp: PnP ACPI: found 4 devices
[ 0.447135] pci 0000:02:00.0: assigning 36 device properties
[ 0.447191] pci 0000:00:08.0: assigning 4 device properties
[ 0.451747] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.451903] NET: Registered PF_INET protocol family
[ 0.452158] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.454063] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.454141] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.454302] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.454382] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.454552] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.454608] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.454650] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.454745] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.454763] NET: Registered PF_XDP protocol family
[ 0.454807] pci 0000:00:15.0: PCI bridge to [bus 01]
[ 0.454829] pci 0000:00:15.0: bridge window [mem 0x93100000-0x931fffff]
[ 0.454855] pci 0000:00:17.0: PCI bridge to [bus 02]
[ 0.454861] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
[ 0.454867] pci 0000:00:17.0: bridge window [mem 0x92000000-0x930fffff]
[ 0.454873] pci 0000:00:17.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.454881] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.454886] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.454890] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window]
[ 0.454894] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.454899] pci_bus 0000:01: resource 1 [mem 0x93100000-0x931fffff]
[ 0.454904] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.454908] pci_bus 0000:02: resource 1 [mem 0x92000000-0x930fffff]
[ 0.454912] pci_bus 0000:02: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.456247] ACPI: \_SB_.PCI0.LUS0: Enabled at IRQ 23
[ 0.457454] ACPI: \_SB_.PCI0.LUS2: Enabled at IRQ 23
[ 0.458669] ACPI: \_SB_.PCI0.Z000: Enabled at IRQ 20
[ 0.459840] ACPI: \_SB_.PCI0.Z001: Enabled at IRQ 19
[ 0.460334] PCI: CLS 256 bytes, default 64
[ 0.460497] Trying to unpack rootfs image as initramfs...
[ 0.469100] Initialise system trusted keyrings
[ 0.469129] Key type blacklist registered
[ 0.469265] workingset: timestamp_bits=41 max_order=19 bucket_order=0
[ 0.473436] zbud: loaded
[ 0.497975] Key type asymmetric registered
[ 0.497987] Asymmetric key parser 'x509' registered
[ 0.498124] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.498294] io scheduler mq-deadline registered
[ 0.498298] io scheduler kyber registered
[ 0.498410] io scheduler bfq registered
[ 0.500021] ACPI: \_SB_.PCI0.Z00J: Enabled at IRQ 22
[ 0.500418] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.500779] Monitor-Mwait will be used to enter C-1 state
[ 0.500803] Monitor-Mwait will be used to enter C-2 state
[ 0.500816] Monitor-Mwait will be used to enter C-3 state
[ 0.500826] ACPI: \_PR_.CPU0: Found 3 idle states
[ 0.501335] ACPI: AC: AC Adapter [ADP1] (on-line)
[ 0.501479] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.501569] ACPI: button: Lid Switch [LID0]
[ 0.501649] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.501702] ACPI: button: Power Button [PWRB]
[ 0.501798] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.501848] ACPI: button: Sleep Button [SLPB]
[ 0.501955] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.502040] ACPI: button: Power Button [PWRF]
[ 0.502825] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.507188] Non-volatile memory driver v1.3
[ 0.507194] Linux agpgart interface v0.103
[ 0.507197] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.507199] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.507253] ACPI: bus type drm_connector registered
[ 0.508274] ahci 0000:00:0a.0: version 3.0
[ 0.509177] ACPI: \_SB_.PCI0.LSI0: Enabled at IRQ 18
[ 0.509343] ahci 0000:00:0a.0: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 0.509353] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led pio slum part apst
[ 0.509803] scsi host0: ahci
[ 0.509966] ata1: SATA max UDMA/133 abar m8192@0x93284000 port 0x93284100 irq 24
[ 0.510092] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.510119] ehci-pci: EHCI PCI platform driver
[ 0.510545] ehci-pci 0000:00:04.1: EHCI Host Controller
[ 0.510560] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.510576] ehci-pci 0000:00:04.1: debug port 1
[ 0.510628] ehci-pci 0000:00:04.1: disable ppcd for nvidia mcp89
[ 0.510661] ehci-pci 0000:00:04.1: irq 23, io mem 0x9328b100
[ 0.520906] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.10
[ 0.521064] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[ 0.521072] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.521077] usb usb1: Product: EHCI Host Controller
[ 0.521081] usb usb1: Manufacturer: Linux 5.16.0-rc1-1-mainline ehci_hcd
[ 0.521085] usb usb1: SerialNumber: 0000:00:04.1
[ 0.521383] hub 1-0:1.0: USB hub found
[ 0.521405] hub 1-0:1.0: 6 ports detected
[ 0.522516] ehci-pci 0000:00:06.1: EHCI Host Controller
[ 0.522530] ehci-pci 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.522546] ehci-pci 0000:00:06.1: debug port 1
[ 0.522590] ehci-pci 0000:00:06.1: disable ppcd for nvidia mcp89
[ 0.522624] ehci-pci 0000:00:06.1: irq 19, io mem 0x9328b000
[ 0.534268] ehci-pci 0000:00:06.1: USB 2.0 started, EHCI 1.10
[ 0.534446] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[ 0.534454] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.534459] usb usb2: Product: EHCI Host Controller
[ 0.534463] usb usb2: Manufacturer: Linux 5.16.0-rc1-1-mainline ehci_hcd
[ 0.534466] usb usb2: SerialNumber: 0000:00:06.1
[ 0.534769] hub 2-0:1.0: USB hub found
[ 0.534793] hub 2-0:1.0: 6 ports detected
[ 0.535487] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.535499] ohci-pci: OHCI PCI platform driver
[ 0.535923] ohci-pci 0000:00:04.0: OHCI PCI host controller
[ 0.535938] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 0.535991] ohci-pci 0000:00:04.0: irq 23, io mem 0x9328a000
[ 0.593015] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.16
[ 0.593030] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.593035] usb usb3: Product: OHCI PCI host controller
[ 0.593039] usb usb3: Manufacturer: Linux 5.16.0-rc1-1-mainline ohci_hcd
[ 0.593042] usb usb3: SerialNumber: 0000:00:04.0
[ 0.593348] hub 3-0:1.0: USB hub found
[ 0.593369] hub 3-0:1.0: 6 ports detected
[ 0.594549] ohci-pci 0000:00:06.0: OHCI PCI host controller
[ 0.594563] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 0.594639] ohci-pci 0000:00:06.0: irq 20, io mem 0x93289000
[ 0.607651] Freeing initrd memory: 12600K
[ 0.632773] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.16
[ 0.632787] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.632792] usb usb4: Product: OHCI PCI host controller
[ 0.632796] usb usb4: Manufacturer: Linux 5.16.0-rc1-1-mainline ohci_hcd
[ 0.632799] usb usb4: SerialNumber: 0000:00:06.0
[ 0.633126] hub 4-0:1.0: USB hub found
[ 0.633146] hub 4-0:1.0: 6 ports detected
[ 0.633801] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.633948] usbcore: registered new interface driver usbserial_generic
[ 0.633961] usbserial: USB Serial support registered for generic
[ 0.634372] rtc_cmos 00:03: RTC can wake from S4
[ 0.634972] rtc_cmos 00:03: registered as rtc0
[ 0.635065] rtc_cmos 00:03: setting system clock to 2001-01-01T00:00:11 UTC (978307211)
[ 0.635108] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.635274] intel_pstate: CPU model not supported
[ 0.635326] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.635732] efifb: probing for efifb
[ 0.635767] efifb: No BGRT, not showing boot graphics
[ 0.635769] efifb: framebuffer at 0x80010000, using 6144k, total 6144k
[ 0.635774] efifb: mode is 1366x768x32, linelength=8192, pages=1
[ 0.635778] efifb: scrolling: redraw
[ 0.635779] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.635884] fbcon: Deferring console take-over
[ 0.635888] fb0: EFI VGA frame buffer device
[ 0.635929] hid: raw HID events driver (C) Jiri Kosina
[ 0.636110] drop_monitor: Initializing network drop monitor service
[ 0.636270] Initializing XFRM netlink socket
[ 0.636279] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 0.636284] NET: Registered PF_PACKET protocol family
[ 0.636725] microcode: sig=0x1067a, pf=0x80, revision=0xa0b
[ 0.636740] microcode: Microcode Update Driver: v2.2.
[ 0.636750] IPI shorthand broadcast: enabled
[ 0.636780] sched_clock: Marking stable (635855762, 684151)->(646179782, -9639869)
[ 0.637079] registered taskstats version 1
[ 0.637258] Loading compiled-in X.509 certificates
[ 0.650166] Loaded X.509 cert 'Build time autogenerated kernel key: 12b7d12bc392e2baef079894db94d644400c2527'
[ 0.650671] zswap: loaded using pool lz4/z3fold
[ 0.651019] Key type ._fscrypt registered
[ 0.651023] Key type .fscrypt registered
[ 0.651026] Key type fscrypt-provisioning registered
[ 0.654301] PM: Magic number: 1:0:0
[ 0.654720] RAS: Correctable Errors collector initialized.
[ 0.746253] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.746824] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.746875] ata1.00: ATA-8: APPLE SSD TS064C, CJAA0201, max UDMA/100
[ 0.746881] ata1.00: 118489088 sectors, multi 16: LBA48
[ 0.747351] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.747402] ata1.00: configured for UDMA/100
[ 0.747705] scsi 0:0:0:0: Direct-Access ATA APPLE SSD TS064C 0201 PQ: 0 ANSI: 5
[ 0.748231] sd 0:0:0:0: [sda] 118489088 512-byte logical blocks: (60.7 GB/56.5 GiB)
[ 0.748261] sd 0:0:0:0: [sda] Write Protect is off
[ 0.748267] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.748311] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.752020] sda: sda1 sda2 sda3
[ 0.762944] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.769155] Freeing unused decrypted memory: 2036K
[ 0.770298] Freeing unused kernel image (initmem) memory: 1796K
[ 0.770388] Write protecting the kernel read-only data: 30720k
[ 0.772228] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 0.773351] Freeing unused kernel image (rodata/data gap) memory: 1388K
[ 0.886919] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.886931] rodata_test: all tests were successful
[ 0.886965] x86/mm: Checking user space page tables
[ 0.972700] usb 3-1: new full-speed USB device number 2 using ohci-pci
[ 0.996005] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.996019] Run /init as init process
[ 0.996022] with arguments:
[ 0.996028] /init
[ 0.996031] with environment:
[ 0.996033] HOME=/
[ 0.996036] TERM=linux
[ 1.036019] random: fast init done
[ 1.086038] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc-early' as unstable because the skew is too large:
[ 1.086044] clocksource: 'hpet' wd_nsec: 506668280 wd_now: 1913e44 wd_last: cff6f1 mask: ffffffff
[ 1.086050] clocksource: 'tsc-early' cs_nsec: 425452597 cs_now: 69c4116da cs_last: 678d2f175 mask: ffffffffffffffff
[ 1.086055] clocksource: 'tsc-early' is current clocksource.
[ 1.086061] tsc: Marking TSC unstable due to clocksource watchdog
[ 1.086073] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 1.086075] sched_clock: Marking unstable (1085388640, 684151)<-(1095712612, -9639869)
[ 1.088270] clocksource: Switched to clocksource hpet
[ 1.447167] usb 3-1: New USB device found, idVendor=04fe, idProduct=0008, bcdDevice= 1.02
[ 1.447175] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.447181] usb 3-1: Product: Generic USB Hub
[ 1.447185] usb 3-1: Manufacturer: Chicony
[ 1.450237] hub 3-1:1.0: USB hub found
[ 1.453160] hub 3-1:1.0: 3 ports detected
[ 1.762115] usb 3-1.1: new full-speed USB device number 3 using ohci-pci
[ 1.879154] usb 3-1.1: New USB device found, idVendor=04fe, idProduct=0006, bcdDevice= 1.02
[ 1.879163] usb 3-1.1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 1.879168] usb 3-1.1: Product: PFU-65 USB Keyboard
[ 1.879171] usb 3-1.1: Manufacturer: Chicony
[ 2.052127] usb 3-5: new full-speed USB device number 4 using ohci-pci
[ 2.196633] fbcon: Taking over console
[ 2.196943] Console: switching to colour frame buffer device 170x48
[ 2.292076] usb 3-5: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00
[ 2.292089] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.292095] usb 3-5: Product: BRCM2070 Hub
[ 2.292099] usb 3-5: Manufacturer: Apple Inc.
[ 2.295183] hub 3-5:1.0: USB hub found
[ 2.298071] hub 3-5:1.0: 3 ports detected
[ 2.511097] input: Chicony PFU-65 USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:04FE:0006.0001/input/input4
[ 2.574627] hid-generic 0003:04FE:0006.0001: input,hidraw0: USB HID v1.00 Keyboard [Chicony PFU-65 USB Keyboard] on usb-0000:00:04.0-1.1/input0
[ 2.574720] usbcore: registered new interface driver usbhid
[ 2.574725] usbhid: USB HID core driver
[ 2.585418] usb 1-6: new high-speed USB device number 4 using ehci-pci
[ 2.618806] usb 3-5.1: new full-speed USB device number 5 using ohci-pci
[ 2.735206] usb 3-5.1: New USB device found, idVendor=05ac, idProduct=820a, bcdDevice= 1.00
[ 2.735219] usb 3-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.746149] input: HID 05ac:820a as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.1/3-5.1:1.0/0003:05AC:820A.0002/input/input5
[ 2.746185] usb 1-6: New USB device found, idVendor=05ac, idProduct=850a, bcdDevice= 6.25
[ 2.746193] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.746198] usb 1-6: Product: Built-in iSight
[ 2.746202] usb 1-6: Manufacturer: Apple Inc.
[ 2.746205] usb 1-6: SerialNumber: CCGA9SAZ4UDF9KF0
[ 2.802663] hid-generic 0003:05AC:820A.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:04.0-5.1/input0
[ 2.885611] usb 3-5.2: new full-speed USB device number 6 using ohci-pci
[ 3.015208] usb 3-5.2: New USB device found, idVendor=05ac, idProduct=820b, bcdDevice= 1.00
[ 3.015220] usb 3-5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.026331] input: HID 05ac:820b as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.2/3-5.2:1.0/0003:05AC:820B.0003/input/input6
[ 3.026524] hid-generic 0003:05AC:820B.0003: input,hidraw2: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:04.0-5.2/input0
[ 3.105402] usb 3-5.3: new full-speed USB device number 7 using ohci-pci
[ 3.232080] usb 3-5.3: New USB device found, idVendor=05ac, idProduct=821b, bcdDevice= 0.42
[ 3.232092] usb 3-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.232097] usb 3-5.3: Product: Bluetooth USB Host Controller
[ 3.232102] usb 3-5.3: Manufacturer: Apple Inc.
[ 3.433186] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
[ 3.436838] XFS (sda3): Mounting V5 Filesystem
[ 3.482170] XFS (sda3): Ending clean mount
[ 3.652160] systemd[1]: System time before build time, advancing clock.
[ 3.957409] random: crng init done
[ 3.957439] systemd[1]: Successfully credited entropy passed from boot loader.
[ 3.961196] systemd[1]: systemd 249.6-3-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 3.979099] systemd[1]: Detected architecture x86-64.
[ 3.984713] systemd[1]: Hostname set to <archmba>.
[ 4.635165] systemd[1]: /usr/lib/systemd/system/mbpfan.service:10: PIDFile= references a path below legacy directory /var/run/, updating /var/run/mbpfan.pid → /run/mbpfan.pid; please update the unit file accordingly.
[ 4.716395] systemd[1]: Queued start job for default target Graphical Interface.
[ 4.719123] systemd[1]: Created slice Slice /system/getty.
[ 4.720221] systemd[1]: Created slice Slice /system/modprobe.
[ 4.721211] systemd[1]: Created slice Slice /system/syncthing.
[ 4.722143] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 4.722902] systemd[1]: Created slice User and Session Slice.
[ 4.723252] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.723581] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.724154] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.724451] systemd[1]: Reached target Local Encrypted Volumes.
[ 4.724711] systemd[1]: Reached target Path Units.
[ 4.724896] systemd[1]: Reached target Remote File Systems.
[ 4.725066] systemd[1]: Reached target Slice Units.
[ 4.725275] systemd[1]: Reached target System Time Set.
[ 4.725518] systemd[1]: Reached target Local Verity Protected Volumes.
[ 4.725846] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.726267] systemd[1]: Listening on LVM2 poll daemon socket.
[ 4.729840] systemd[1]: Listening on Process Core Dump Socket.
[ 4.730869] systemd[1]: Listening on Journal Audit Socket.
[ 4.731291] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.731759] systemd[1]: Listening on Journal Socket.
[ 4.732713] systemd[1]: Listening on Network Service Netlink Socket.
[ 4.735310] systemd[1]: Listening on udev Control Socket.
[ 4.735923] systemd[1]: Listening on udev Kernel Socket.
[ 4.738470] systemd[1]: Mounting Huge Pages File System...
[ 4.740936] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.743475] systemd[1]: Mounting Kernel Debug File System...
[ 4.746149] systemd[1]: Mounting Kernel Trace File System...
[ 4.749248] systemd[1]: Starting Create List of Static Device Nodes...
[ 4.755301] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 4.758230] systemd[1]: Starting Load Kernel Module configfs...
[ 4.761024] systemd[1]: Starting Load Kernel Module drm...
[ 4.763908] systemd[1]: Starting Load Kernel Module fuse...
[ 4.786679] systemd[1]: Starting Set Up Additional Binary Formats...
[ 4.787032] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 4.794007] systemd[1]: Starting Journal Service...
[ 4.810762] fuse: init (API version 7.35)
[ 4.811233] systemd[1]: Starting Load Kernel Modules...
[ 4.813928] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.814325] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 4.830226] systemd[1]: Starting Coldplug All udev Devices...
[ 4.850781] systemd[1]: Mounted Huge Pages File System.
[ 4.855274] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.857190] systemd[1]: Mounted Kernel Debug File System.
[ 4.858975] systemd[1]: Mounted Kernel Trace File System.
[ 4.861321] systemd[1]: Finished Create List of Static Device Nodes.
[ 4.863899] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 4.866238] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 4.866893] systemd[1]: Finished Load Kernel Module configfs.
[ 4.869864] xfs filesystem being remounted at / supports timestamps until 2038 (0x7fffffff)
[ 4.869995] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 4.870760] systemd[1]: Finished Load Kernel Module drm.
[ 4.874378] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 4.875711] systemd[1]: Finished Load Kernel Module fuse.
[ 4.879040] audit: type=1130 audit(1636644286.223:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.879078] audit: type=1131 audit(1636644286.223:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.880039] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 4.886058] audit: type=1130 audit(1636644286.229:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.886529] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 188 (systemd-binfmt)
[ 4.892390] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 4.902270] systemd[1]: Mounting FUSE Control File System...
[ 4.906094] Asymmetric key parser 'pkcs8' registered
[ 4.919255] systemd[1]: Mounting Kernel Configuration File System...
[ 4.929089] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 4.937188] systemd[1]: Starting Rebuild Hardware Database...
[ 4.949101] systemd[1]: Starting Load/Save Random Seed...
[ 4.953408] systemd[1]: Starting Create System Users...
[ 4.966873] systemd[1]: Finished Load Kernel Modules.
[ 4.976614] audit: type=1130 audit(1636644286.319:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.981810] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 4.984050] systemd[1]: Mounted FUSE Control File System.
[ 4.998156] systemd[1]: Finished Set Up Additional Binary Formats.
[ 5.000651] audit: type=1130 audit(1636644286.343:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.001591] systemd[1]: Mounted Kernel Configuration File System.
[ 5.018395] systemd[1]: Finished Load/Save Random Seed.
[ 5.022695] audit: type=1130 audit(1636644286.366:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.023178] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 5.035917] systemd[1]: Starting Apply Kernel Variables...
[ 5.044874] systemd[1]: Finished Create System Users.
[ 5.046608] audit: type=1130 audit(1636644286.389:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.056005] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.074312] systemd[1]: Finished Apply Kernel Variables.
[ 5.076054] audit: type=1130 audit(1636644286.419:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.153288] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 5.155023] audit: type=1130 audit(1636644286.496:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.155292] systemd[1]: Reached target Preparation for Local File Systems.
[ 5.157009] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
[ 5.187335] systemd[1]: Started Journal Service.
[ 5.207516] systemd-journald[189]: Received client request to flush runtime journal.
[ 5.209752] systemd-journald[189]: File /var/log/journal/e45c5aa8f43849479ae7ac2035f163b3/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 5.323782] kauditd_printk_skb: 2 callbacks suppressed
[ 5.323789] audit: type=1130 audit(1636644286.666:13): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.643448] audit: type=1130 audit(1636644287.986:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hwdb-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.645933] audit: type=1334 audit(1636644287.989:15): prog-id=13 op=LOAD
[ 6.646168] audit: type=1334 audit(1636644287.989:16): prog-id=14 op=LOAD
[ 6.646178] audit: type=1334 audit(1636644287.989:17): prog-id=15 op=LOAD
[ 6.779471] audit: type=1130 audit(1636644288.123:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.120819] smbus_hc ACPI0001:00: SBS HC: offset = 0x20, query_bit = 0x10
[ 7.173302] ACPI: video: [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 7.173435] ACPI: video: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 7.173990] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/LNXVIDEO:00/input/input7
[ 7.451807] bcma-pci-bridge 0000:01:00.0: bus0: Found chip with id 43224, rev 0x01 and package 0x08
[ 7.451837] bcma-pci-bridge 0000:01:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 7.451857] bcma-pci-bridge 0000:01:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 7.451886] bcma-pci-bridge 0000:01:00.0: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 7.480949] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 7.548292] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] (battery present)
[ 7.585743] bcma-pci-bridge 0000:01:00.0: bus0: Bus registered
[ 7.651912] Adding 4194300k swap on /dev/sda2. Priority:-2 extents:1 across:4194300k SSFS
[ 7.878297] audit: type=1130 audit(1636644289.219:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-B890\x2d55BD comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.081938] audit: type=1130 audit(1636644289.423:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.279103] audit: type=1130 audit(1636644289.623:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.320639] audit: type=1127 audit(1636644289.663:22): pid=267 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[ 8.695580] applesmc: key=323 fan=1 temp=27 index=26 acc=0 lux=0 kbd=0
[ 8.699133] applesmc applesmc.768: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 9.094822] xfs filesystem being remounted at /run/systemd/unit-root/var/lib/systemd/linger supports timestamps until 2038 (0x7fffffff)
[ 9.095010] xfs filesystem being remounted at /run/systemd/unit-root/var/tmp supports timestamps until 2038 (0x7fffffff)
[ 9.095326] xfs filesystem being remounted at /run/systemd/unit-root/etc supports timestamps until 2038 (0x7fffffff)
[ 9.110706] xfs filesystem being remounted at /run/systemd/unit-root/etc supports timestamps until 2038 (0x7fffffff)
[ 9.137923] xfs filesystem being remounted at /run/systemd/unit-root/var/cache/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.146310] xfs filesystem being remounted at /run/systemd/unit-root/var/lib/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.147994] xfs filesystem being remounted at /run/systemd/unit-root/var/log/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.203596] xfs filesystem being remounted at /run/systemd/unit-root/var/lib/systemd/linger supports timestamps until 2038 (0x7fffffff)
[ 9.205165] xfs filesystem being remounted at /run/systemd/unit-root/var/tmp supports timestamps until 2038 (0x7fffffff)
[ 9.212355] intel_powerclamp: No package C-state available
[ 9.213901] xfs filesystem being remounted at /run/systemd/unit-root/var/tmp supports timestamps until 2038 (0x7fffffff)
[ 9.214026] xfs filesystem being remounted at /run/systemd/unit-root/var/lib/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.214254] xfs filesystem being remounted at /run/systemd/unit-root/var/log/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.214708] xfs filesystem being remounted at /run/systemd/unit-root/var/cache/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.223779] snd_hda_intel 0000:00:08.0: enabling device (0000 -> 0002)
[ 9.224735] ACPI: \_SB_.PCI0.LAZA: Enabled at IRQ 20
[ 9.224754] snd_hda_intel 0000:00:08.0: Disabling MSI
[ 9.224759] snd_hda_intel 0000:00:08.0: position_fix set to 1 for device 10de:cb89
[ 9.239843] intel_powerclamp: No package C-state available
[ 9.360921] xfs filesystem being remounted at /run/systemd/unit-root/var/cache/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.370733] xfs filesystem being remounted at /run/systemd/unit-root/var/lib/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.375491] xfs filesystem being remounted at /run/systemd/unit-root/var/log/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.381883] xfs filesystem being remounted at /run/systemd/unit-root/var/tmp supports timestamps until 2038 (0x7fffffff)
[ 9.405738] snd_hda_codec_cirrus hdaudioC0D0: autoconfig for CS4206: line_outs=2 (0xb/0xa/0x0/0x0/0x0) type:speaker
[ 9.405753] snd_hda_codec_cirrus hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.405759] snd_hda_codec_cirrus hdaudioC0D0: hp_outs=1 (0x9/0x0/0x0/0x0/0x0)
[ 9.405764] snd_hda_codec_cirrus hdaudioC0D0: mono: mono_out=0x0
[ 9.405768] snd_hda_codec_cirrus hdaudioC0D0: dig-out=0x10/0x0
[ 9.405772] snd_hda_codec_cirrus hdaudioC0D0: inputs:
[ 9.405776] snd_hda_codec_cirrus hdaudioC0D0: Mic=0xd
[ 9.482998] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
[ 9.483157] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
[ 9.483302] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.0/sound/card0/input11
[ 9.483444] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.0/sound/card0/input12
[ 9.881003] ACPI Warning: \_SB.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20210930/nsarguments-61)
[ 9.881329] ACPI: \_SB_.PCI0.IXVE.IGPU: failed to evaluate _DSM
[ 9.881409] nouveau 0000:02:00.0: enabling device (0006 -> 0007)
[ 9.886789] ACPI: \_SB_.PCI0.LGPU: Enabled at IRQ 16
[ 9.887259] checking generic (80010000 600000) vs hw (92000000 1000000)
[ 9.887265] checking generic (80010000 600000) vs hw (80000000 10000000)
[ 9.887268] fb0: switching to nouveau from EFI VGA
[ 9.890221] Console: switching to colour dummy device 80x25
[ 9.891888] nouveau 0000:02:00.0: vgaarb: deactivate vga console
[ 9.893023] nouveau 0000:02:00.0: NVIDIA MCP89 (0af100a2)
[ 9.949352] xfs filesystem being remounted at /run/systemd/unit-root/var/tmp supports timestamps until 2038 (0x7fffffff)
[ 9.949685] xfs filesystem being remounted at /run/systemd/unit-root/etc/iwd supports timestamps until 2038 (0x7fffffff)
[ 9.949830] xfs filesystem being remounted at /run/systemd/unit-root/var/lib/iwd supports timestamps until 2038 (0x7fffffff)
[ 9.958759] xfs filesystem being remounted at /run/systemd/unit-root/etc/iwd supports timestamps until 2038 (0x7fffffff)
[ 9.982120] xfs filesystem being remounted at /run/systemd/unit-root/var/lib/iwd supports timestamps until 2038 (0x7fffffff)
[ 9.989939] xfs filesystem being remounted at /run/systemd/unit-root/var/tmp supports timestamps until 2038 (0x7fffffff)
[ 10.011396] nouveau 0000:02:00.0: bios: version 70.89.13.00.00
[ 10.053343] NET: Registered PF_ALG protocol family
[ 10.127658] nouveau 0000:02:00.0: fb: 256 MiB stolen system memory
[ 10.210717] nouveau 0000:02:00.0: bus: MMIO write of 0000807f FAULT at 100c18
[ 10.371170] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 10.490438] nouveau 0000:02:00.0: bus: MMIO write of 0000807e FAULT at 100c1c
[ 10.493192] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 10.493294] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 10.493302] cfg80211: failed to load regulatory.db
[ 10.908799] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 10.908822] b43: probe of bcma0:1 failed with error -524
[ 10.911718] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 11.017637] brcmsmac bcma0:1: mfg 4bf core 812 rev 23 class 0 irq 22
[ 11.020430] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.095451] cryptd: max_cpu_qlen set to 1000
[ 11.139880] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 11.139915] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 11.237317] kauditd_printk_skb: 28 callbacks suppressed
[ 11.237324] audit: type=1130 audit(1636644292.576:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=iwd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.280937] audit: type=1130 audit(1636644292.623:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.302885] audit: type=1130 audit(1636644292.646:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=syncthing@archmba comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.389844] audit: type=1130 audit(1636644292.729:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.407979] audit: type=1130 audit(1636644292.749:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.415242] xfs filesystem being remounted at /run/systemd/unit-root/var/tmp supports timestamps until 2038 (0x7fffffff)
[ 11.447520] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 11.447554] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 11.489102] audit: type=1130 audit(1636644292.833:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.587114] audit: type=1101 audit(1636644292.929:55): pid=647 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="archmba" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.587130] audit: type=1103 audit(1636644292.929:56): pid=647 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="archmba" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 11.587138] audit: type=1006 audit(1636644292.929:57): pid=647 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[ 11.587145] audit: type=1300 audit(1636644292.929:57): arch=c000003e syscall=1 success=yes exit=4 a0=9 a1=7ffddd1900a0 a2=4 a3=3e8 items=0 ppid=1 pid=647 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/usr/lib/systemd/systemd" key=(null)
[ 11.672186] wlan0: authenticate with 80:22:a7:34:50:c0
[ 11.674063] wlan0: send auth to 80:22:a7:34:50:c0 (try 1/3)
[ 11.679879] wlan0: authenticated
[ 11.682261] wlan0: associate with 80:22:a7:34:50:c0 (try 1/3)
[ 11.688061] wlan0: RX AssocResp from 80:22:a7:34:50:c0 (capab=0x431 status=0 aid=4)
[ 11.688589] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[ 11.688609] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 11.688635] wlan0: associated
[ 11.693361] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 11.700529] systemd-journald[189]: File /var/log/journal/e45c5aa8f43849479ae7ac2035f163b3/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 11.702399] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 0 addresses (implement)
[ 11.714926] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: AC_VO txop exceeded phylen 159/256 dur 1778/1504
[ 11.735640] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: AC_VO txop exceeded phylen 137/256 dur 1602/1504
[ 11.743099] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 12.196087] usbcore: registered new device driver apple-mfi-fastcharge
[ 12.519012] mc: Linux media interface: v0.10
[ 12.740922] videodev: Linux video capture interface: v2.00
[ 13.083433] nouveau 0000:02:00.0: DRM: VRAM: 256 MiB
[ 13.083445] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
[ 13.083453] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
[ 13.083459] nouveau 0000:02:00.0: DRM: DCB version 4.0
[ 13.083464] nouveau 0000:02:00.0: DRM: DCB outp 00: 040001b6 0f220010
[ 13.083471] nouveau 0000:02:00.0: DRM: DCB outp 01: 020112a6 0f220010
[ 13.083476] nouveau 0000:02:00.0: DRM: DCB outp 02: 02011262 00020010
[ 13.083481] nouveau 0000:02:00.0: DRM: DCB conn 00: 00002047
[ 13.083486] nouveau 0000:02:00.0: DRM: DCB conn 01: 00101146
[ 13.097355] nouveau 0000:02:00.0: DRM: MM: using M2MF for buffer copies
[ 13.260972] usb 1-6: Found UVC 1.00 device Built-in iSight (05ac:850a)
[ 13.285683] input: Built-in iSight: Built-in iSigh as /devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input13
[ 13.286327] usbcore: registered new interface driver uvcvideo
[ 13.700392] nouveau 0000:02:00.0: DRM: allocated 1366x768 fb: 0x50000, bo 00000000d2d8b523
[ 13.702007] fbcon: nouveau (fb0) is primary device
[ 13.726632] mousedev: PS/2 mouse device common for all mice
[ 13.817400] Console: switching to colour frame buffer device 170x48
[ 13.922570] nouveau 0000:02:00.0: [drm] fb0: nouveau frame buffer device
[ 13.956574] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
[ 14.290499] Bluetooth: Core ver 2.22
[ 14.291924] NET: Registered PF_BLUETOOTH protocol family
[ 14.291929] Bluetooth: HCI device and connection manager initialized
[ 14.291940] Bluetooth: HCI socket layer initialized
[ 14.291946] Bluetooth: L2CAP socket layer initialized
[ 14.291959] Bluetooth: SCO socket layer initialized
[ 14.577404] usbcore: registered new interface driver btusb
[ 14.618011] usb 3-5.1: USB disconnect, device number 5
[ 14.711034] Bluetooth: hci0: BCM: chip id 19 build 0848
[ 14.714029] Bluetooth: hci0: BCM: product 05ac:821b
[ 14.717030] Bluetooth: hci0: BCM: features 0x07
[ 14.735033] Bluetooth: hci0: Apple Bluetooth Device
[ 14.840003] usb 3-5.2: USB disconnect, device number 6
[-- Attachment #3: Type: text/plain, Size: 24 bytes --]
5.16-rc1-patched dmesg
[-- Attachment #4: dmesg_v5.16-rc1-patched.log --]
[-- Type: text/plain, Size: 71327 bytes --]
[ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.000000] Linux version 5.16.0-rc1-1-mainline-patched (linux-mainline-patched@archlinux) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Wed, 17 Nov 2021 10:55:05 +0000
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux-mainline-patched.img root=/dev/sda3 rw ipv6.disable=1
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] signal: max sigframe size: 1520
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000006f000000-0x000000007effffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f000000-0x000000007f718fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f719000-0x000000007f938fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f939000-0x000000007f953fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f954000-0x000000007f96afff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f96b000-0x000000007f96dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f96e000-0x000000007f99afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f99b000-0x000000007f9affff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f9b0000-0x000000007f9dafff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f9db000-0x000000007fef8fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fef9000-0x000000007fefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000093200000-0x0000000093200fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x6cd69018-0x6cd77c57] usable ==> usable
[ 0.000000] e820: update [mem 0x6cd69018-0x6cd77c57] usable ==> usable
[ 0.000000] e820: update [mem 0x6cd68018-0x6cd68984] usable ==> usable
[ 0.000000] e820: update [mem 0x6cd68018-0x6cd68984] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000006cd68017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006cd68018-0x000000006cd68984] usable
[ 0.000000] reserve setup_data: [mem 0x000000006cd68985-0x000000006cd69017] usable
[ 0.000000] reserve setup_data: [mem 0x000000006cd69018-0x000000006cd77c57] usable
[ 0.000000] reserve setup_data: [mem 0x000000006cd77c58-0x000000006effffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000006f000000-0x000000007effffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007f000000-0x000000007f718fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007f719000-0x000000007f938fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000007f939000-0x000000007f953fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007f954000-0x000000007f96afff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000007f96b000-0x000000007f96dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007f96e000-0x000000007f99afff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007f99b000-0x000000007f9affff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007f9b0000-0x000000007f9dafff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007f9db000-0x000000007fef8fff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007fef9000-0x000000007fefffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000093200000-0x0000000093200fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] efi: EFI v1.10 by Apple
[ 0.000000] efi: ACPI=0x7f96a000 ACPI 2.0=0x7f96a014 SMBIOS=0x7f71a000
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBookAir3,1/Mac-942452F5819B1C1B, BIOS MBA31.88Z.0061.B07.1201241641 01/24/12
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1397.125 MHz processor
[ 0.000026] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000035] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000053] last_pfn = 0x7fef9 max_arch_pfn = 0x400000000
[ 0.001560] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.029656] Secure boot disabled
[ 0.029663] RAMDISK: [mem 0x67f32000-0x68b7bfff]
[ 0.029676] ACPI: Early table checksum verification disabled
[ 0.029685] ACPI: RSDP 0x000000007F96A014 000024 (v02 APPLE )
[ 0.029696] ACPI: XSDT 0x000000007F96A1C0 000084 (v01 APPLE Apple00 00000061 01000013)
[ 0.029711] ACPI: FACP 0x000000007F968000 0000F4 (v04 APPLE Apple00 00000061 Loki 0000005F)
[ 0.029726] ACPI: DSDT 0x000000007F95B000 00572C (v01 APPLE MacBookA 00030001 INTL 20061109)
[ 0.029736] ACPI: FACS 0x000000007F71E000 000040
[ 0.029745] ACPI: FACS 0x000000007F71E000 000040
[ 0.029753] ACPI: HPET 0x000000007F967000 000038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.029764] ACPI: APIC 0x000000007F966000 000068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.029773] ACPI: APIC 0x000000007F965000 000068 (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.029783] ACPI: ASF! 0x000000007F963000 0000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.029793] ACPI: SBST 0x000000007F962000 000030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.029803] ACPI: ECDT 0x000000007F961000 000053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.029813] ACPI: SSDT 0x000000007F958000 000107 (v01 APPLE SataAhci 00001000 INTL 20061109)
[ 0.029823] ACPI: SSDT 0x000000007F957000 000024 (v01 APPLE Apple 00001000 INTL 20061109)
[ 0.029832] ACPI: SSDT 0x000000007F955000 00008A (v01 APPLE NoSDCard 00001000 INTL 20061109)
[ 0.029842] ACPI: SSDT 0x000000007F954000 0004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.029852] ACPI: MCFG 0x000000007F964000 00003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.029860] ACPI: Reserving FACP table memory at [mem 0x7f968000-0x7f9680f3]
[ 0.029864] ACPI: Reserving DSDT table memory at [mem 0x7f95b000-0x7f96072b]
[ 0.029868] ACPI: Reserving FACS table memory at [mem 0x7f71e000-0x7f71e03f]
[ 0.029871] ACPI: Reserving FACS table memory at [mem 0x7f71e000-0x7f71e03f]
[ 0.029874] ACPI: Reserving HPET table memory at [mem 0x7f967000-0x7f967037]
[ 0.029877] ACPI: Reserving APIC table memory at [mem 0x7f966000-0x7f966067]
[ 0.029880] ACPI: Reserving APIC table memory at [mem 0x7f965000-0x7f965067]
[ 0.029883] ACPI: Reserving ASF! table memory at [mem 0x7f963000-0x7f9630a4]
[ 0.029886] ACPI: Reserving SBST table memory at [mem 0x7f962000-0x7f96202f]
[ 0.029889] ACPI: Reserving ECDT table memory at [mem 0x7f961000-0x7f961052]
[ 0.029892] ACPI: Reserving SSDT table memory at [mem 0x7f958000-0x7f958106]
[ 0.029895] ACPI: Reserving SSDT table memory at [mem 0x7f957000-0x7f957023]
[ 0.029898] ACPI: Reserving SSDT table memory at [mem 0x7f955000-0x7f955089]
[ 0.029901] ACPI: Reserving SSDT table memory at [mem 0x7f954000-0x7f9544db]
[ 0.029904] ACPI: Reserving MCFG table memory at [mem 0x7f964000-0x7f96403b]
[ 0.029912] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.029915] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.029927] ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware
[ 0.030024] No NUMA configuration found
[ 0.030027] Faking a node at [mem 0x0000000000000000-0x000000007fef8fff]
[ 0.030036] NODE_DATA(0) allocated [mem 0x7fef5000-0x7fef8fff]
[ 0.030090] Zone ranges:
[ 0.030093] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.030098] DMA32 [mem 0x0000000001000000-0x000000007fef8fff]
[ 0.030103] Normal empty
[ 0.030106] Device empty
[ 0.030109] Movable zone start for each node
[ 0.030111] Early memory node ranges
[ 0.030112] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.030117] node 0: [mem 0x0000000000090000-0x000000000009ffff]
[ 0.030120] node 0: [mem 0x0000000000100000-0x000000006effffff]
[ 0.030123] node 0: [mem 0x000000007f000000-0x000000007f718fff]
[ 0.030126] node 0: [mem 0x000000007f939000-0x000000007f953fff]
[ 0.030129] node 0: [mem 0x000000007f96b000-0x000000007f96dfff]
[ 0.030132] node 0: [mem 0x000000007f99b000-0x000000007f9affff]
[ 0.030135] node 0: [mem 0x000000007f9db000-0x000000007fef8fff]
[ 0.030139] Initmem setup node 0 [mem 0x0000000000001000-0x000000007fef8fff]
[ 0.030151] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.030155] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.030232] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.048325] On node 0, zone DMA32: 32768 pages in unavailable ranges
[ 0.048355] On node 0, zone DMA32: 544 pages in unavailable ranges
[ 0.048359] On node 0, zone DMA32: 23 pages in unavailable ranges
[ 0.048365] On node 0, zone DMA32: 45 pages in unavailable ranges
[ 0.048420] On node 0, zone DMA32: 43 pages in unavailable ranges
[ 0.048433] On node 0, zone DMA32: 263 pages in unavailable ranges
[ 0.048764] ACPI: PM-Timer IO Port: 0x408
[ 0.048784] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.048791] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.048810] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.048818] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.048823] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.048833] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.048837] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.048850] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.048905] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.048911] PM: hibernation: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.048917] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.048922] PM: hibernation: Registered nosave memory: [mem 0x6cd68000-0x6cd68fff]
[ 0.048927] PM: hibernation: Registered nosave memory: [mem 0x6cd68000-0x6cd68fff]
[ 0.048930] PM: hibernation: Registered nosave memory: [mem 0x6cd69000-0x6cd69fff]
[ 0.048935] PM: hibernation: Registered nosave memory: [mem 0x6cd77000-0x6cd77fff]
[ 0.048940] PM: hibernation: Registered nosave memory: [mem 0x6f000000-0x7effffff]
[ 0.048946] PM: hibernation: Registered nosave memory: [mem 0x7f719000-0x7f938fff]
[ 0.048951] PM: hibernation: Registered nosave memory: [mem 0x7f954000-0x7f96afff]
[ 0.048957] PM: hibernation: Registered nosave memory: [mem 0x7f96e000-0x7f99afff]
[ 0.048962] PM: hibernation: Registered nosave memory: [mem 0x7f9b0000-0x7f9dafff]
[ 0.048967] [mem 0x93201000-0xffbfffff] available for PCI devices
[ 0.048972] Booting paravirtualized kernel on bare hardware
[ 0.048979] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.066581] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:2 nr_node_ids:1
[ 0.067503] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u1048576
[ 0.067524] pcpu-alloc: s212992 r8192 d28672 u1048576 alloc=1*2097152
[ 0.067532] pcpu-alloc: [0] 0 1
[ 0.067593] Fallback order for Node 0: 0
[ 0.067603] Built 1 zonelists, mobility grouping on. Total pages: 450424
[ 0.067607] Policy zone: DMA32
[ 0.067610] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-mainline-patched.img root=/dev/sda3 rw ipv6.disable=1
[ 0.068590] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.069049] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.070106] mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
[ 0.091698] Memory: 1692696K/1830944K available (16392K kernel code, 2075K rwdata, 10900K rodata, 1796K init, 3840K bss, 137988K reserved, 0K cma-reserved)
[ 0.091720] random: get_random_u64 called from __kmem_cache_create+0x2a/0x560 with crng_init=0
[ 0.092116] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.092155] Kernel/User page tables isolation: enabled
[ 0.092204] ftrace: allocating 44896 entries in 176 pages
[ 0.132228] ftrace: allocated 176 pages with 3 groups
[ 0.132488] Dynamic Preempt: full
[ 0.132553] rcu: Preemptible hierarchical RCU implementation.
[ 0.132556] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.132557] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2.
[ 0.132561] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.132564] Trampoline variant of Tasks RCU enabled.
[ 0.132565] Rude variant of Tasks RCU enabled.
[ 0.132567] Tracing variant of Tasks RCU enabled.
[ 0.132569] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.132572] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.143977] NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16
[ 0.144506] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.144625] Console: colour dummy device 80x25
[ 0.144666] printk: console [tty0] enabled
[ 0.144718] ACPI: Core revision 20210930
[ 0.144940] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.144967] APIC: Switch to symmetric I/O mode setup
[ 0.145487] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.161635] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x142384679a2, max_idle_ns: 440795236310 ns
[ 0.161647] Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.67 BogoMIPS (lpj=4657083)
[ 0.161654] pid_max: default: 32768 minimum: 301
[ 0.190593] LSM: Security Framework initializing
[ 0.190617] landlock: Up and running.
[ 0.190621] Yama: becoming mindful.
[ 0.190642] LSM support for eBPF active
[ 0.190686] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.190706] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.191343] CPU0: Thermal monitoring enabled (TM2)
[ 0.191367] process: using mwait in idle threads
[ 0.191374] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.191378] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.191387] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.191392] Spectre V2 : Mitigation: Full generic retpoline
[ 0.191394] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.191396] Speculative Store Bypass: Vulnerable
[ 0.191403] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.197292] Freeing SMP alternatives memory: 36K
[ 0.304445] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU U9400 @ 1.40GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.304972] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.304976] ... version: 2
[ 0.304976] ... bit width: 40
[ 0.304976] ... generic registers: 2
[ 0.304976] ... value mask: 000000ffffffffff
[ 0.304976] ... max period: 000000007fffffff
[ 0.304976] ... fixed-purpose events: 3
[ 0.304976] ... event mask: 0000000700000003
[ 0.304976] rcu: Hierarchical SRCU implementation.
[ 0.304976] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.304976] smp: Bringing up secondary CPUs ...
[ 0.304976] x86: Booting SMP configuration:
[ 0.304976] .... node #0, CPUs: #1
[ 0.313730] smp: Brought up 1 node, 2 CPUs
[ 0.313730] smpboot: Max logical packages: 1
[ 0.313730] smpboot: Total of 2 processors activated (5590.35 BogoMIPS)
[ 0.318548] devtmpfs: initialized
[ 0.318548] x86/mm: Memory block size: 128MB
[ 0.319113] ACPI: PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.319113] ACPI: PM: Registering ACPI NVS region [mem 0x7f719000-0x7f938fff] (2228224 bytes)
[ 0.319113] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.319113] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.319113] pinctrl core: initialized pinctrl subsystem
[ 0.319113] PM: RTC time: 13:23:23, date: 2021-11-17
[ 0.319330] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.319640] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.319725] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.319808] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.319828] audit: initializing netlink subsys (disabled)
[ 0.319851] audit: type=2000 audit(1637155403.173:1): state=initialized audit_enabled=0 res=1
[ 0.319851] thermal_sys: Registered thermal governor 'fair_share'
[ 0.319851] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.319851] thermal_sys: Registered thermal governor 'step_wise'
[ 0.319851] thermal_sys: Registered thermal governor 'user_space'
[ 0.319851] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.321658] cpuidle: using governor ladder
[ 0.321672] cpuidle: using governor menu
[ 0.321804] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.321808] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.322247] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
[ 0.322260] PCI: not using MMCONFIG
[ 0.322269] PCI: Using configuration type 1 for base access
[ 0.326458] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.326512] HugeTLB: can free 6 vmemmap pages for hugepages-2048kB
[ 0.326512] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.326512] ACPI: Disabled all _OSI OS vendors
[ 0.326512] ACPI: Added _OSI(Module Device)
[ 0.326512] ACPI: Added _OSI(Processor Device)
[ 0.326512] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.326512] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.326512] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.326512] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.326512] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.326512] ACPI: Added _OSI(Darwin)
[ 0.337809] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.338702] ACPI: EC: EC started
[ 0.338705] ACPI: EC: interrupt blocked
[ 0.341704] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.341710] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.342192] ACPI: BIOS _OSI(Darwin) query honored via DMI
[ 0.345837] ACPI: Dynamic OEM Table Load:
[ 0.345855] ACPI: SSDT 0xFFFF949FC11BEE00 0001FB (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.348575] ACPI: Dynamic OEM Table Load:
[ 0.348591] ACPI: SSDT 0xFFFF949FC130D000 0005A6 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.350666] ACPI: Dynamic OEM Table Load:
[ 0.350680] ACPI: SSDT 0xFFFF949FC134EE00 0000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.351799] ACPI: Dynamic OEM Table Load:
[ 0.351813] ACPI: SSDT 0xFFFF949FC134BB40 000085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.353180] ACPI: Interpreter enabled
[ 0.353227] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.353231] ACPI: Using IOAPIC for interrupt routing
[ 0.353300] PCI: MMCONFIG for domain 0000 [bus 00-02] at [mem 0xf0000000-0xf02fffff] (base 0xf0000000)
[ 0.354149] PCI: MMCONFIG at [mem 0xf0000000-0xf02fffff] reserved in ACPI motherboard resources
[ 0.354173] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.354739] ACPI: Enabled 7 GPEs in block 00 to 1F
[ 0.354756] ACPI: Enabled 2 GPEs in block 20 to 5F
[ 0.382704] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.382722] acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability LTR DPC]
[ 0.382748] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-02] only partially covers this bridge
[ 0.383423] PCI host bridge to bus 0000:00
[ 0.383429] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.383435] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.383440] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
[ 0.383444] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.383449] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.383486] pci 0000:00:00.0: [10de:0d60] type 00 class 0x060000
[ 0.383797] pci 0000:00:00.1: [10de:0d68] type 00 class 0x050000
[ 0.384127] pci 0000:00:01.0: [10de:0d6d] type 00 class 0x050000
[ 0.384364] pci 0000:00:01.1: [10de:0d6e] type 00 class 0x050000
[ 0.384664] pci 0000:00:01.2: [10de:0d6f] type 00 class 0x050000
[ 0.384899] pci 0000:00:01.3: [10de:0d70] type 00 class 0x050000
[ 0.385147] pci 0000:00:02.0: [10de:0d71] type 00 class 0x050000
[ 0.385387] pci 0000:00:02.1: [10de:0d72] type 00 class 0x050000
[ 0.385621] pci 0000:00:03.0: [10de:0d80] type 00 class 0x060100
[ 0.385640] pci 0000:00:03.0: reg 0x10: [io 0x2100-0x21ff]
[ 0.385849] pci 0000:00:03.1: [10de:0d7b] type 00 class 0x050000
[ 0.386100] pci 0000:00:03.2: [10de:0d79] type 00 class 0x0c0500
[ 0.386119] pci 0000:00:03.2: reg 0x10: [io 0x2000-0x20ff]
[ 0.386131] pci 0000:00:03.2: reg 0x14: [mem 0x93286000-0x93287fff]
[ 0.386156] pci 0000:00:03.2: reg 0x20: [io 0x2240-0x227f]
[ 0.386167] pci 0000:00:03.2: reg 0x24: [io 0x2200-0x223f]
[ 0.386221] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.386417] pci 0000:00:03.3: [10de:0d69] type 00 class 0x050000
[ 0.386689] pci 0000:00:03.4: [10de:0d7a] type 00 class 0x0b4000
[ 0.386724] pci 0000:00:03.4: reg 0x10: [mem 0x93200000-0x9327ffff]
[ 0.387036] pci 0000:00:04.0: [10de:0d9c] type 00 class 0x0c0310
[ 0.387055] pci 0000:00:04.0: reg 0x10: [mem 0x9328a000-0x9328afff]
[ 0.387135] pci 0000:00:04.0: supports D1 D2
[ 0.387139] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.388047] pci 0000:00:04.1: [10de:0d9d] type 00 class 0x0c0320
[ 0.388068] pci 0000:00:04.1: reg 0x10: [mem 0x9328b100-0x9328b1ff]
[ 0.388156] pci 0000:00:04.1: supports D1 D2
[ 0.388160] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.389271] pci 0000:00:06.0: [10de:0d9c] type 00 class 0x0c0310
[ 0.389291] pci 0000:00:06.0: reg 0x10: [mem 0x93289000-0x93289fff]
[ 0.389372] pci 0000:00:06.0: supports D1 D2
[ 0.389376] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.390277] pci 0000:00:06.1: [10de:0d9d] type 00 class 0x0c0320
[ 0.390298] pci 0000:00:06.1: reg 0x10: [mem 0x9328b000-0x9328b0ff]
[ 0.390386] pci 0000:00:06.1: supports D1 D2
[ 0.390390] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.391476] pci 0000:00:08.0: [10de:0d94] type 00 class 0x040300
[ 0.391494] pci 0000:00:08.0: reg 0x10: [mem 0x93280000-0x93283fff]
[ 0.391573] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.392030] pci 0000:00:0a.0: [10de:0d88] type 00 class 0x010601
[ 0.392048] pci 0000:00:0a.0: reg 0x10: [io 0x2298-0x229f]
[ 0.392059] pci 0000:00:0a.0: reg 0x14: [io 0x22a4-0x22a7]
[ 0.392069] pci 0000:00:0a.0: reg 0x18: [io 0x2290-0x2297]
[ 0.392079] pci 0000:00:0a.0: reg 0x1c: [io 0x22a0-0x22a3]
[ 0.392089] pci 0000:00:0a.0: reg 0x20: [io 0x2280-0x228f]
[ 0.392099] pci 0000:00:0a.0: reg 0x24: [mem 0x93284000-0x93285fff]
[ 0.393055] pci 0000:00:0b.0: [10de:0d75] type 00 class 0x050000
[ 0.393073] pci 0000:00:0b.0: reg 0x10: [mem 0x93288000-0x93288fff]
[ 0.393298] pci 0000:00:15.0: [10de:0d9b] type 01 class 0x060400
[ 0.393447] pci 0000:00:15.0: enabling Extended Tags
[ 0.393638] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.393896] pci 0000:00:17.0: [10de:0d76] type 01 class 0x060400
[ 0.393971] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
[ 0.394373] pci 0000:01:00.0: [14e4:4353] type 00 class 0x028000
[ 0.394407] pci 0000:01:00.0: reg 0x10: [mem 0x93100000-0x93103fff 64bit]
[ 0.394478] pci 0000:01:00.0: enabling Extended Tags
[ 0.394579] pci 0000:01:00.0: supports D1 D2
[ 0.394582] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.394843] pci 0000:00:15.0: PCI bridge to [bus 01]
[ 0.394870] pci 0000:00:15.0: bridge window [mem 0x93100000-0x931fffff]
[ 0.394915] pci_bus 0000:02: extended config space not accessible
[ 0.394992] pci 0000:02:00.0: [10de:08a2] type 00 class 0x030000
[ 0.395009] pci 0000:02:00.0: reg 0x10: [mem 0x92000000-0x92ffffff]
[ 0.395023] pci 0000:02:00.0: reg 0x14: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.395037] pci 0000:02:00.0: reg 0x1c: [mem 0x90000000-0x91ffffff 64bit pref]
[ 0.395047] pci 0000:02:00.0: reg 0x24: [io 0x1000-0x107f]
[ 0.395057] pci 0000:02:00.0: reg 0x30: [mem 0x93000000-0x9301ffff pref]
[ 0.395079] pci 0000:02:00.0: Enabling HDA controller
[ 0.395085] pci 0000:02:00.0: BAR 1: assigned to efifb
[ 0.397138] pci 0000:00:17.0: PCI bridge to [bus 02]
[ 0.397147] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
[ 0.397153] pci 0000:00:17.0: bridge window [mem 0x92000000-0x930fffff]
[ 0.397160] pci 0000:00:17.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.398260] ACPI: PCI: Interrupt link LNK1 configured for IRQ 16
[ 0.398630] ACPI: PCI: Interrupt link LNK2 configured for IRQ 17
[ 0.398989] ACPI: PCI: Interrupt link LNK3 configured for IRQ 18
[ 0.399346] ACPI: PCI: Interrupt link LNK4 configured for IRQ 19
[ 0.399704] ACPI: PCI: Interrupt link Z00J configured for IRQ 21
[ 0.400060] ACPI: PCI: Interrupt link Z00K configured for IRQ 21
[ 0.400418] ACPI: PCI: Interrupt link Z00L configured for IRQ 21
[ 0.400775] ACPI: PCI: Interrupt link Z00M configured for IRQ 21
[ 0.401132] ACPI: PCI: Interrupt link LSMB configured for IRQ 22
[ 0.401488] ACPI: PCI: Interrupt link LUS0 configured for IRQ 17
[ 0.401853] ACPI: PCI: Interrupt link LUS2 configured for IRQ 17
[ 0.402208] ACPI: PCI: Interrupt link LMAC configured for IRQ 17
[ 0.402564] ACPI: PCI: Interrupt link LAZA configured for IRQ 20
[ 0.402919] ACPI: PCI: Interrupt link LGPU configured for IRQ 16
[ 0.403265] ACPI: PCI: Interrupt link LPID configured for IRQ 0
[ 0.403270] ACPI: PCI: Interrupt link LPID disabled
[ 0.403623] ACPI: PCI: Interrupt link LSI0 configured for IRQ 18
[ 0.403979] ACPI: PCI: Interrupt link Z000 configured for IRQ 18
[ 0.404336] ACPI: PCI: Interrupt link Z001 configured for IRQ 22
[ 0.404682] ACPI: PCI: Interrupt link LPMU configured for IRQ 0
[ 0.404687] ACPI: PCI: Interrupt link LPMU disabled
[ 0.405429] ACPI: EC: interrupt unblocked
[ 0.405433] ACPI: EC: event unblocked
[ 0.405441] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.405445] ACPI: EC: GPE=0x57
[ 0.405449] ACPI: \_SB_.PCI0.LPCB.EC__: Boot ECDT EC initialization complete
[ 0.405454] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[ 0.405611] iommu: Default domain type: Translated
[ 0.405616] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.405658] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.405658] pci 0000:02:00.0: vgaarb: bridge control possible
[ 0.405658] pci 0000:02:00.0: vgaarb: setting as boot device
[ 0.405658] vgaarb: loaded
[ 0.405658] SCSI subsystem initialized
[ 0.405658] libata version 3.00 loaded.
[ 0.405658] ACPI: bus type USB registered
[ 0.405658] usbcore: registered new interface driver usbfs
[ 0.405658] usbcore: registered new interface driver hub
[ 0.405658] usbcore: registered new device driver usb
[ 0.405658] pps_core: LinuxPPS API ver. 1 registered
[ 0.405658] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.405658] PTP clock support registered
[ 0.405658] EDAC MC: Ver: 3.0.0
[ 0.405658] Registered efivars operations
[ 0.405658] NetLabel: Initializing
[ 0.405658] NetLabel: domain hash size = 128
[ 0.405658] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.405658] NetLabel: unlabeled traffic allowed by default
[ 0.405658] PCI: Using ACPI for IRQ routing
[ 0.405658] PCI: pci_cache_line_size set to 64 bytes
[ 0.405658] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.405658] e820: reserve RAM buffer [mem 0x6cd68018-0x6fffffff]
[ 0.405658] e820: reserve RAM buffer [mem 0x6cd69018-0x6fffffff]
[ 0.405658] e820: reserve RAM buffer [mem 0x6f000000-0x6fffffff]
[ 0.405658] e820: reserve RAM buffer [mem 0x7f719000-0x7fffffff]
[ 0.405658] e820: reserve RAM buffer [mem 0x7f954000-0x7fffffff]
[ 0.405658] e820: reserve RAM buffer [mem 0x7f96e000-0x7fffffff]
[ 0.405658] e820: reserve RAM buffer [mem 0x7f9b0000-0x7fffffff]
[ 0.405658] e820: reserve RAM buffer [mem 0x7fef9000-0x7fffffff]
[ 0.410492] hpet: 4 channels of 0 reserved for per-cpu timers
[ 0.410504] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.410517] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.411830] clocksource: Switched to clocksource tsc-early
[ 0.440191] VFS: Disk quotas dquot_6.6.0
[ 0.440235] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.440392] pnp: PnP ACPI init
[ 0.440740] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.441191] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.441604] system 00:02: [io 0x0400-0x047f] has been reserved
[ 0.441611] system 00:02: [io 0x0480-0x04ff] has been reserved
[ 0.441616] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.441625] system 00:02: [io 0x0580-0x05ff] has been reserved
[ 0.441629] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.441634] system 00:02: [io 0x0880-0x08ff] has been reserved
[ 0.441640] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.441644] system 00:02: [io 0x0295-0x0296] has been reserved
[ 0.442908] pnp: PnP ACPI: found 4 devices
[ 0.446682] pci 0000:02:00.0: assigning 36 device properties
[ 0.446738] pci 0000:00:08.0: assigning 4 device properties
[ 0.451294] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.451451] NET: Registered PF_INET protocol family
[ 0.451705] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.453608] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.453686] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.453849] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.453971] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.454188] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.454245] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.454279] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.454375] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.454394] NET: Registered PF_XDP protocol family
[ 0.454439] pci 0000:00:15.0: PCI bridge to [bus 01]
[ 0.454461] pci 0000:00:15.0: bridge window [mem 0x93100000-0x931fffff]
[ 0.454487] pci 0000:00:17.0: PCI bridge to [bus 02]
[ 0.454492] pci 0000:00:17.0: bridge window [io 0x1000-0x1fff]
[ 0.454498] pci 0000:00:17.0: bridge window [mem 0x92000000-0x930fffff]
[ 0.454504] pci 0000:00:17.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.454512] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.454517] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.454521] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window]
[ 0.454525] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.454530] pci_bus 0000:01: resource 1 [mem 0x93100000-0x931fffff]
[ 0.454535] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.454539] pci_bus 0000:02: resource 1 [mem 0x92000000-0x930fffff]
[ 0.454543] pci_bus 0000:02: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
[ 0.455787] ACPI: \_SB_.PCI0.LUS0: Enabled at IRQ 23
[ 0.456995] ACPI: \_SB_.PCI0.LUS2: Enabled at IRQ 23
[ 0.458210] ACPI: \_SB_.PCI0.Z000: Enabled at IRQ 20
[ 0.459383] ACPI: \_SB_.PCI0.Z001: Enabled at IRQ 19
[ 0.459879] PCI: CLS 256 bytes, default 64
[ 0.460041] Trying to unpack rootfs image as initramfs...
[ 0.468081] Initialise system trusted keyrings
[ 0.468111] Key type blacklist registered
[ 0.468239] workingset: timestamp_bits=41 max_order=19 bucket_order=0
[ 0.472369] zbud: loaded
[ 0.496252] Key type asymmetric registered
[ 0.496263] Asymmetric key parser 'x509' registered
[ 0.496401] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[ 0.496563] io scheduler mq-deadline registered
[ 0.496567] io scheduler kyber registered
[ 0.496680] io scheduler bfq registered
[ 0.498238] ACPI: \_SB_.PCI0.Z00J: Enabled at IRQ 22
[ 0.498670] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.499040] Monitor-Mwait will be used to enter C-1 state
[ 0.499063] Monitor-Mwait will be used to enter C-2 state
[ 0.499076] Monitor-Mwait will be used to enter C-3 state
[ 0.499086] ACPI: \_PR_.CPU0: Found 3 idle states
[ 0.499596] ACPI: AC: AC Adapter [ADP1] (on-line)
[ 0.499745] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.499841] ACPI: button: Lid Switch [LID0]
[ 0.499922] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.499975] ACPI: button: Power Button [PWRB]
[ 0.500071] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.500122] ACPI: button: Sleep Button [SLPB]
[ 0.500233] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.500318] ACPI: button: Power Button [PWRF]
[ 0.501110] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.505479] Non-volatile memory driver v1.3
[ 0.505485] Linux agpgart interface v0.103
[ 0.505488] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.505490] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.505545] ACPI: bus type drm_connector registered
[ 0.506559] ahci 0000:00:0a.0: version 3.0
[ 0.507467] ACPI: \_SB_.PCI0.LSI0: Enabled at IRQ 18
[ 0.507643] ahci 0000:00:0a.0: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 0.507653] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led pio slum part apst
[ 0.508115] scsi host0: ahci
[ 0.508279] ata1: SATA max UDMA/133 abar m8192@0x93284000 port 0x93284100 irq 24
[ 0.508397] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.508421] ehci-pci: EHCI PCI platform driver
[ 0.508849] ehci-pci 0000:00:04.1: EHCI Host Controller
[ 0.508864] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.508880] ehci-pci 0000:00:04.1: debug port 1
[ 0.508933] ehci-pci 0000:00:04.1: disable ppcd for nvidia mcp89
[ 0.508964] ehci-pci 0000:00:04.1: irq 23, io mem 0x9328b100
[ 0.519170] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.10
[ 0.519327] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[ 0.519335] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.519340] usb usb1: Product: EHCI Host Controller
[ 0.519344] usb usb1: Manufacturer: Linux 5.16.0-rc1-1-mainline-patched ehci_hcd
[ 0.519348] usb usb1: SerialNumber: 0000:00:04.1
[ 0.519653] hub 1-0:1.0: USB hub found
[ 0.519676] hub 1-0:1.0: 6 ports detected
[ 0.520799] ehci-pci 0000:00:06.1: EHCI Host Controller
[ 0.520813] ehci-pci 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.520829] ehci-pci 0000:00:06.1: debug port 1
[ 0.520873] ehci-pci 0000:00:06.1: disable ppcd for nvidia mcp89
[ 0.520908] ehci-pci 0000:00:06.1: irq 19, io mem 0x9328b000
[ 0.532516] ehci-pci 0000:00:06.1: USB 2.0 started, EHCI 1.10
[ 0.532694] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.16
[ 0.532702] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.532707] usb usb2: Product: EHCI Host Controller
[ 0.532711] usb usb2: Manufacturer: Linux 5.16.0-rc1-1-mainline-patched ehci_hcd
[ 0.532715] usb usb2: SerialNumber: 0000:00:06.1
[ 0.532999] hub 2-0:1.0: USB hub found
[ 0.533021] hub 2-0:1.0: 6 ports detected
[ 0.533731] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.533743] ohci-pci: OHCI PCI platform driver
[ 0.534163] ohci-pci 0000:00:04.0: OHCI PCI host controller
[ 0.534178] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 0.534233] ohci-pci 0000:00:04.0: irq 23, io mem 0x9328a000
[ 0.591283] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.16
[ 0.591298] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.591303] usb usb3: Product: OHCI PCI host controller
[ 0.591307] usb usb3: Manufacturer: Linux 5.16.0-rc1-1-mainline-patched ohci_hcd
[ 0.591311] usb usb3: SerialNumber: 0000:00:04.0
[ 0.591615] hub 3-0:1.0: USB hub found
[ 0.591636] hub 3-0:1.0: 6 ports detected
[ 0.592819] ohci-pci 0000:00:06.0: OHCI PCI host controller
[ 0.592834] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 0.592910] ohci-pci 0000:00:06.0: irq 20, io mem 0x93289000
[ 0.607382] Freeing initrd memory: 12584K
[ 0.632286] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.16
[ 0.632299] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.632304] usb usb4: Product: OHCI PCI host controller
[ 0.632308] usb usb4: Manufacturer: Linux 5.16.0-rc1-1-mainline-patched ohci_hcd
[ 0.632311] usb usb4: SerialNumber: 0000:00:06.0
[ 0.632635] hub 4-0:1.0: USB hub found
[ 0.632654] hub 4-0:1.0: 6 ports detected
[ 0.633308] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.633426] usbcore: registered new interface driver usbserial_generic
[ 0.633439] usbserial: USB Serial support registered for generic
[ 0.633864] rtc_cmos 00:03: RTC can wake from S4
[ 0.634465] rtc_cmos 00:03: registered as rtc0
[ 0.634557] rtc_cmos 00:03: setting system clock to 2021-11-17T13:23:24 UTC (1637155404)
[ 0.634599] rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.634763] intel_pstate: CPU model not supported
[ 0.634814] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.635220] efifb: probing for efifb
[ 0.635255] efifb: No BGRT, not showing boot graphics
[ 0.635257] efifb: framebuffer at 0x80010000, using 6144k, total 6144k
[ 0.635261] efifb: mode is 1366x768x32, linelength=8192, pages=1
[ 0.635265] efifb: scrolling: redraw
[ 0.635267] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.635371] fbcon: Deferring console take-over
[ 0.635375] fb0: EFI VGA frame buffer device
[ 0.635417] hid: raw HID events driver (C) Jiri Kosina
[ 0.635597] drop_monitor: Initializing network drop monitor service
[ 0.635759] Initializing XFRM netlink socket
[ 0.635768] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 0.635772] NET: Registered PF_PACKET protocol family
[ 0.636214] microcode: sig=0x1067a, pf=0x80, revision=0xa0b
[ 0.636229] microcode: Microcode Update Driver: v2.2.
[ 0.636238] IPI shorthand broadcast: enabled
[ 0.636268] sched_clock: Marking stable (635363756, 663728)->(646568409, -10540925)
[ 0.636566] registered taskstats version 1
[ 0.636755] Loading compiled-in X.509 certificates
[ 0.649761] Loaded X.509 cert 'Build time autogenerated kernel key: dec5ebe1682e4bbd650bd4e35368707656149814'
[ 0.650269] zswap: loaded using pool lz4/z3fold
[ 0.650604] Key type ._fscrypt registered
[ 0.650609] Key type .fscrypt registered
[ 0.650611] Key type fscrypt-provisioning registered
[ 0.653891] PM: Magic number: 13:509:382
[ 0.654314] RAS: Correctable Errors collector initialized.
[ 0.749069] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.749640] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.749701] ata1.00: ATA-8: APPLE SSD TS064C, CJAA0201, max UDMA/100
[ 0.749707] ata1.00: 118489088 sectors, multi 16: LBA48
[ 0.750225] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.750274] ata1.00: configured for UDMA/100
[ 0.750572] scsi 0:0:0:0: Direct-Access ATA APPLE SSD TS064C 0201 PQ: 0 ANSI: 5
[ 0.751091] sd 0:0:0:0: [sda] 118489088 512-byte logical blocks: (60.7 GB/56.5 GiB)
[ 0.751121] sd 0:0:0:0: [sda] Write Protect is off
[ 0.751126] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.751172] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.758261] sda: sda1 sda2 sda3
[ 0.776238] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.782432] Freeing unused decrypted memory: 2036K
[ 0.783564] Freeing unused kernel image (initmem) memory: 1796K
[ 0.783654] Write protecting the kernel read-only data: 30720k
[ 0.785493] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 0.786616] Freeing unused kernel image (rodata/data gap) memory: 1388K
[ 0.899826] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.899838] rodata_test: all tests were successful
[ 0.899873] x86/mm: Checking user space page tables
[ 0.966005] usb 3-1: new full-speed USB device number 2 using ohci-pci
[ 1.008681] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.008694] Run /init as init process
[ 1.008697] with arguments:
[ 1.008700] /init
[ 1.008703] with environment:
[ 1.008705] HOME=/
[ 1.008708] TERM=linux
[ 1.029322] random: fast init done
[ 1.079351] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc-early' as unstable because the skew is too large:
[ 1.079357] clocksource: 'hpet' wd_nsec: 506673960 wd_now: 1911291 wd_last: cfcab0 mask: ffffffff
[ 1.079363] clocksource: 'tsc-early' cs_nsec: 419178720 cs_now: 79de8fe94 cs_last: 77b00c290 mask: ffffffffffffffff
[ 1.079368] clocksource: 'tsc-early' is current clocksource.
[ 1.079376] tsc: Marking TSC unstable due to clocksource watchdog
[ 1.079384] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 1.079386] sched_clock: Marking unstable (1078720368, 663728)<-(1089924973, -10540925)
[ 1.080362] clocksource: Switched to clocksource hpet
[ 1.353453] usb 3-1: New USB device found, idVendor=04fe, idProduct=0008, bcdDevice= 1.02
[ 1.353463] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.353468] usb 3-1: Product: Generic USB Hub
[ 1.353471] usb 3-1: Manufacturer: Chicony
[ 1.356514] hub 3-1:1.0: USB hub found
[ 1.359454] hub 3-1:1.0: 3 ports detected
[ 1.668397] usb 3-1.1: new full-speed USB device number 3 using ohci-pci
[ 1.785466] usb 3-1.1: New USB device found, idVendor=04fe, idProduct=0006, bcdDevice= 1.02
[ 1.785474] usb 3-1.1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 1.785479] usb 3-1.1: Product: PFU-65 USB Keyboard
[ 1.785482] usb 3-1.1: Manufacturer: Chicony
[ 1.958404] usb 3-5: new full-speed USB device number 4 using ohci-pci
[ 2.197421] usb 3-5: New USB device found, idVendor=0a5c, idProduct=4500, bcdDevice= 1.00
[ 2.197430] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.197434] usb 3-5: Product: BRCM2070 Hub
[ 2.197438] usb 3-5: Manufacturer: Apple Inc.
[ 2.200519] hub 3-5:1.0: USB hub found
[ 2.203435] hub 3-5:1.0: 3 ports detected
[ 2.228224] fbcon: Taking over console
[ 2.228475] Console: switching to colour frame buffer device 170x48
[ 2.521690] usb 3-5.1: new full-speed USB device number 5 using ohci-pci
[ 2.549199] input: Chicony PFU-65 USB Keyboard as /devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:04FE:0006.0001/input/input4
[ 2.561677] usb 1-6: new high-speed USB device number 4 using ehci-pci
[ 2.605374] hid-generic 0003:04FE:0006.0001: input,hidraw0: USB HID v1.00 Keyboard [Chicony PFU-65 USB Keyboard] on usb-0000:00:04.0-1.1/input0
[ 2.605475] usbcore: registered new interface driver usbhid
[ 2.605479] usbhid: USB HID core driver
[ 2.665389] usb 3-5.1: New USB device found, idVendor=05ac, idProduct=820a, bcdDevice= 1.00
[ 2.665401] usb 3-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.676589] input: HID 05ac:820a as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.1/3-5.1:1.0/0003:05AC:820A.0002/input/input5
[ 2.725587] usb 1-6: New USB device found, idVendor=05ac, idProduct=850a, bcdDevice= 6.25
[ 2.725602] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.725607] usb 1-6: Product: Built-in iSight
[ 2.725611] usb 1-6: Manufacturer: Apple Inc.
[ 2.725615] usb 1-6: SerialNumber: CCGA9SAZ4UDF9KF0
[ 2.732285] hid-generic 0003:05AC:820A.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:04.0-5.1/input0
[ 2.815020] usb 3-5.2: new full-speed USB device number 6 using ohci-pci
[ 2.941507] usb 3-5.2: New USB device found, idVendor=05ac, idProduct=820b, bcdDevice= 1.00
[ 2.941519] usb 3-5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.952395] input: HID 05ac:820b as /devices/pci0000:00/0000:00:04.0/usb3/3-5/3-5.2/3-5.2:1.0/0003:05AC:820B.0003/input/input6
[ 2.952593] hid-generic 0003:05AC:820B.0003: input,hidraw2: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:04.0-5.2/input0
[ 3.038362] usb 3-5.3: new full-speed USB device number 7 using ohci-pci
[ 3.170507] usb 3-5.3: New USB device found, idVendor=05ac, idProduct=821b, bcdDevice= 0.42
[ 3.170520] usb 3-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.170525] usb 3-5.3: Product: Bluetooth USB Host Controller
[ 3.170529] usb 3-5.3: Manufacturer: Apple Inc.
[ 3.595014] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
[ 3.598869] XFS (sda3): Mounting V5 Filesystem
[ 3.645034] XFS (sda3): Ending clean mount
[ 3.649879] xfs filesystem being mounted at /new_root supports timestamps until 2038 (0x7fffffff)
[ 4.120764] random: crng init done
[ 4.120794] systemd[1]: Successfully credited entropy passed from boot loader.
[ 4.124815] systemd[1]: systemd 249.6-3-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 4.142036] systemd[1]: Detected architecture x86-64.
[ 4.147438] systemd[1]: Hostname set to <archmba>.
[ 4.785002] systemd[1]: /usr/lib/systemd/system/mbpfan.service:10: PIDFile= references a path below legacy directory /var/run/, updating /var/run/mbpfan.pid → /run/mbpfan.pid; please update the unit file accordingly.
[ 4.865084] systemd[1]: Queued start job for default target Graphical Interface.
[ 4.867791] systemd[1]: Created slice Slice /system/getty.
[ 4.868906] systemd[1]: Created slice Slice /system/modprobe.
[ 4.869891] systemd[1]: Created slice Slice /system/syncthing.
[ 4.870795] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 4.871593] systemd[1]: Created slice User and Session Slice.
[ 4.871965] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.872298] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.872856] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.873146] systemd[1]: Reached target Local Encrypted Volumes.
[ 4.873387] systemd[1]: Reached target Path Units.
[ 4.873562] systemd[1]: Reached target Remote File Systems.
[ 4.873734] systemd[1]: Reached target Slice Units.
[ 4.873934] systemd[1]: Reached target System Time Set.
[ 4.874120] systemd[1]: Reached target Local Verity Protected Volumes.
[ 4.874452] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.874882] systemd[1]: Listening on LVM2 poll daemon socket.
[ 4.878526] systemd[1]: Listening on Process Core Dump Socket.
[ 4.879510] systemd[1]: Listening on Journal Audit Socket.
[ 4.879934] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.880405] systemd[1]: Listening on Journal Socket.
[ 4.881335] systemd[1]: Listening on Network Service Netlink Socket.
[ 4.883835] systemd[1]: Listening on udev Control Socket.
[ 4.884491] systemd[1]: Listening on udev Kernel Socket.
[ 4.887293] systemd[1]: Mounting Huge Pages File System...
[ 4.889695] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.892336] systemd[1]: Mounting Kernel Debug File System...
[ 4.894958] systemd[1]: Mounting Kernel Trace File System...
[ 4.898091] systemd[1]: Starting Create List of Static Device Nodes...
[ 4.904276] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 4.907243] systemd[1]: Starting Load Kernel Module configfs...
[ 4.910015] systemd[1]: Starting Load Kernel Module drm...
[ 4.912865] systemd[1]: Starting Load Kernel Module fuse...
[ 4.925378] systemd[1]: Starting Set Up Additional Binary Formats...
[ 4.925807] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 4.945308] systemd[1]: Starting Journal Service...
[ 4.948821] systemd[1]: Starting Load Kernel Modules...
[ 4.958688] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.960232] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 4.963920] systemd[1]: Starting Coldplug All udev Devices...
[ 4.993263] systemd[1]: Mounted Huge Pages File System.
[ 5.005779] fuse: init (API version 7.35)
[ 5.006097] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.008032] systemd[1]: Mounted Kernel Debug File System.
[ 5.009844] systemd[1]: Mounted Kernel Trace File System.
[ 5.018431] systemd[1]: Finished Create List of Static Device Nodes.
[ 5.021052] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 5.023421] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 5.024345] systemd[1]: Finished Load Kernel Module configfs.
[ 5.026701] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 5.027484] systemd[1]: Finished Load Kernel Module drm.
[ 5.029774] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 5.031398] systemd[1]: Finished Load Kernel Module fuse.
[ 5.033440] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 186 (systemd-binfmt)
[ 5.035922] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 5.039905] systemd[1]: Mounting FUSE Control File System...
[ 5.044472] systemd[1]: Mounting Kernel Configuration File System...
[ 5.051970] systemd[1]: Mounted FUSE Control File System.
[ 5.061205] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 5.063307] systemd[1]: Mounted Kernel Configuration File System.
[ 5.169130] xfs filesystem being remounted at / supports timestamps until 2038 (0x7fffffff)
[ 5.173735] systemd[1]: Finished Set Up Additional Binary Formats.
[ 5.186795] audit: type=1130 audit(1637155409.049:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.187886] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 5.189561] audit: type=1130 audit(1637155409.052:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.189969] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 5.194369] systemd[1]: Starting Rebuild Hardware Database...
[ 5.194938] Asymmetric key parser 'pkcs8' registered
[ 5.206740] systemd[1]: Starting Load/Save Random Seed...
[ 5.228665] systemd[1]: Starting Create System Users...
[ 5.233783] systemd[1]: Finished Load Kernel Modules.
[ 5.236610] audit: type=1130 audit(1637155409.099:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.254728] systemd[1]: Finished Coldplug All udev Devices.
[ 5.260063] audit: type=1130 audit(1637155409.122:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.261256] systemd[1]: Finished Load/Save Random Seed.
[ 5.268838] audit: type=1130 audit(1637155409.132:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.269466] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 5.272435] systemd[1]: Starting Apply Kernel Variables...
[ 5.302959] systemd[1]: Finished Create System Users.
[ 5.304697] audit: type=1130 audit(1637155409.165:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.305690] systemd[1]: Finished Apply Kernel Variables.
[ 5.307265] audit: type=1130 audit(1637155409.169:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.309710] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.410209] systemd[1]: Started Journal Service.
[ 5.415062] audit: type=1130 audit(1637155409.275:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.430727] audit: type=1130 audit(1637155409.292:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.434137] systemd-journald[187]: Received client request to flush runtime journal.
[ 5.741045] audit: type=1130 audit(1637155409.602:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.018942] audit: type=1130 audit(1637155410.882:12): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hwdb-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.021372] audit: type=1334 audit(1637155410.882:13): prog-id=13 op=LOAD
[ 7.021510] audit: type=1334 audit(1637155410.882:14): prog-id=14 op=LOAD
[ 7.021634] audit: type=1334 audit(1637155410.882:15): prog-id=15 op=LOAD
[ 7.153404] audit: type=1130 audit(1637155411.015:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 7.496110] smbus_hc ACPI0001:00: SBS HC: offset = 0x20, query_bit = 0x10
[ 7.550968] ACPI: video: [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 7.551047] ACPI: video: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 7.551396] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/LNXVIDEO:00/input/input7
[ 7.775898] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 7.852559] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] (battery present)
[ 7.942775] bcma-pci-bridge 0000:01:00.0: bus0: Found chip with id 43224, rev 0x01 and package 0x08
[ 7.942808] bcma-pci-bridge 0000:01:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[ 7.942828] bcma-pci-bridge 0000:01:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[ 7.942856] bcma-pci-bridge 0000:01:00.0: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[ 8.046549] Adding 4194300k swap on /dev/sda2. Priority:-2 extents:1 across:4194300k SSFS
[ 8.157832] audit: type=1130 audit(1637155412.019:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-B890\x2d55BD comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.294705] audit: type=1130 audit(1637155412.155:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 8.681999] bcma-pci-bridge 0000:01:00.0: bus0: Bus registered
[ 8.898509] applesmc: key=323 fan=1 temp=27 index=26 acc=0 lux=0 kbd=0
[ 8.898746] applesmc applesmc.768: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 9.186513] xfs filesystem being remounted at /run/systemd/unit-root/var/cache/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.188198] xfs filesystem being remounted at /run/systemd/unit-root/var/lib/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.189952] xfs filesystem being remounted at /run/systemd/unit-root/var/log/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.204114] xfs filesystem being remounted at /run/systemd/unit-root/var/tmp supports timestamps until 2038 (0x7fffffff)
[ 9.204349] xfs filesystem being remounted at /run/systemd/unit-root/etc supports timestamps until 2038 (0x7fffffff)
[ 9.205419] xfs filesystem being remounted at /run/systemd/unit-root/var/lib/systemd/linger supports timestamps until 2038 (0x7fffffff)
[ 9.213460] xfs filesystem being remounted at /run/systemd/unit-root/etc supports timestamps until 2038 (0x7fffffff)
[ 9.226432] xfs filesystem being remounted at /run/systemd/unit-root/var/cache/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.226781] xfs filesystem being remounted at /run/systemd/unit-root/var/lib/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.227148] xfs filesystem being remounted at /run/systemd/unit-root/var/log/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.227362] xfs filesystem being remounted at /run/systemd/unit-root/var/tmp supports timestamps until 2038 (0x7fffffff)
[ 9.260997] xfs filesystem being remounted at /run/systemd/unit-root/var/lib/systemd/linger supports timestamps until 2038 (0x7fffffff)
[ 9.269387] xfs filesystem being remounted at /run/systemd/unit-root/var/tmp supports timestamps until 2038 (0x7fffffff)
[ 9.316758] xfs filesystem being remounted at /run/systemd/unit-root/var/cache/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.322575] xfs filesystem being remounted at /run/systemd/unit-root/var/lib/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.325708] xfs filesystem being remounted at /run/systemd/unit-root/var/log/private/dnscrypt-proxy supports timestamps until 2038 (0x7fffffff)
[ 9.339610] xfs filesystem being remounted at /run/systemd/unit-root/var/tmp supports timestamps until 2038 (0x7fffffff)
[ 9.966829] snd_hda_intel 0000:00:08.0: enabling device (0000 -> 0002)
[ 9.967770] ACPI: \_SB_.PCI0.LAZA: Enabled at IRQ 20
[ 9.967792] snd_hda_intel 0000:00:08.0: Disabling MSI
[ 9.967797] snd_hda_intel 0000:00:08.0: position_fix set to 1 for device 10de:cb89
[ 10.102089] snd_hda_codec_cirrus hdaudioC0D0: autoconfig for CS4206: line_outs=2 (0xb/0xa/0x0/0x0/0x0) type:speaker
[ 10.102104] snd_hda_codec_cirrus hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.102110] snd_hda_codec_cirrus hdaudioC0D0: hp_outs=1 (0x9/0x0/0x0/0x0/0x0)
[ 10.102115] snd_hda_codec_cirrus hdaudioC0D0: mono: mono_out=0x0
[ 10.102119] snd_hda_codec_cirrus hdaudioC0D0: dig-out=0x10/0x0
[ 10.102123] snd_hda_codec_cirrus hdaudioC0D0: inputs:
[ 10.102126] snd_hda_codec_cirrus hdaudioC0D0: Mic=0xd
[ 10.150277] ACPI Warning: \_SB.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20210930/nsarguments-61)
[ 10.150607] ACPI: \_SB_.PCI0.IXVE.IGPU: failed to evaluate _DSM
[ 10.150703] nouveau 0000:02:00.0: enabling device (0006 -> 0007)
[ 10.151341] ACPI: \_SB_.PCI0.LGPU: Enabled at IRQ 16
[ 10.151515] checking generic (80010000 600000) vs hw (92000000 1000000)
[ 10.151522] checking generic (80010000 600000) vs hw (80000000 10000000)
[ 10.151526] fb0: switching to nouveau from EFI VGA
[ 10.153782] Console: switching to colour dummy device 80x25
[ 10.153926] nouveau 0000:02:00.0: vgaarb: deactivate vga console
[ 10.154097] nouveau 0000:02:00.0: NVIDIA MCP89 (0af100a2)
[ 10.186764] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
[ 10.186901] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
[ 10.187023] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.0/sound/card0/input11
[ 10.187146] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.0/sound/card0/input12
[ 10.230884] xfs filesystem being remounted at /run/systemd/unit-root/var/tmp supports timestamps until 2038 (0x7fffffff)
[ 10.231040] xfs filesystem being remounted at /run/systemd/unit-root/etc/iwd supports timestamps until 2038 (0x7fffffff)
[ 10.231146] xfs filesystem being remounted at /run/systemd/unit-root/var/lib/iwd supports timestamps until 2038 (0x7fffffff)
[ 10.234143] xfs filesystem being remounted at /run/systemd/unit-root/etc/iwd supports timestamps until 2038 (0x7fffffff)
[ 10.241630] intel_powerclamp: No package C-state available
[ 10.257474] xfs filesystem being remounted at /run/systemd/unit-root/var/lib/iwd supports timestamps until 2038 (0x7fffffff)
[ 10.258875] xfs filesystem being remounted at /run/systemd/unit-root/var/tmp supports timestamps until 2038 (0x7fffffff)
[ 10.317257] NET: Registered PF_ALG protocol family
[ 10.395975] intel_powerclamp: No package C-state available
[ 10.413199] nouveau 0000:02:00.0: bios: version 70.89.13.00.00
[ 10.498052] nouveau 0000:02:00.0: fb: 256 MiB stolen system memory
[ 10.581127] nouveau 0000:02:00.0: bus: MMIO write of 0000807f FAULT at 100c18
[ 10.664219] nouveau 0000:02:00.0: bus: MMIO write of 0000807e FAULT at 100c1c
[ 10.734809] kauditd_printk_skb: 33 callbacks suppressed
[ 10.734816] audit: type=1130 audit(1637155414.595:50): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=alsa-restore comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.157936] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.179684] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 11.179792] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 11.179800] cfg80211: failed to load regulatory.db
[ 11.338873] cryptd: max_cpu_qlen set to 1000
[ 11.454491] audit: type=1130 audit(1637155415.315:51): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=iwd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.468027] audit: type=1130 audit(1637155415.329:52): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.489418] audit: type=1130 audit(1637155415.352:53): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=syncthing@archmba comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.540430] audit: type=1130 audit(1637155415.402:54): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.549821] xfs filesystem being remounted at /run/systemd/unit-root/var/tmp supports timestamps until 2038 (0x7fffffff)
[ 11.560382] audit: type=1130 audit(1637155415.422:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.635899] audit: type=1130 audit(1637155415.499:56): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.720894] audit: type=1101 audit(1637155415.582:57): pid=620 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="archmba" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.720921] audit: type=1103 audit(1637155415.582:58): pid=620 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="archmba" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 11.720930] audit: type=1006 audit(1637155415.582:59): pid=620 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[ 11.761790] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 11.761817] b43: probe of bcma0:1 failed with error -524
[ 11.786464] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 12.510863] usbcore: registered new device driver apple-mfi-fastcharge
[ 12.850563] mc: Linux media interface: v0.10
[ 12.884345] brcmsmac bcma0:1: mfg 4bf core 812 rev 23 class 0 irq 22
[ 12.886318] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.955461] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 12.955496] brcmsmac bcma0:1: brcms_ops_config: change power-save mode: false (implement)
[ 13.157568] wlan0: authenticate with 80:22:a7:34:50:c0
[ 13.159434] wlan0: send auth to 80:22:a7:34:50:c0 (try 1/3)
[ 13.161028] wlan0: authenticated
[ 13.161990] wlan0: associate with 80:22:a7:34:50:c0 (try 1/3)
[ 13.166240] wlan0: RX AssocResp from 80:22:a7:34:50:c0 (capab=0x431 status=0 aid=5)
[ 13.166775] brcmsmac bcma0:1: brcmsmac: brcms_ops_bss_info_changed: associated
[ 13.166795] brcmsmac bcma0:1: brcms_ops_bss_info_changed: qos enabled: true (implement)
[ 13.166818] wlan0: associated
[ 13.189334] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: AC_VO txop exceeded phylen 159/256 dur 1778/1504
[ 13.205306] brcmsmac bcma0:1: wl0: brcms_c_d11hdrs_mac80211: AC_VO txop exceeded phylen 137/256 dur 1602/1504
[ 13.256523] brcmsmac bcma0:1: brcms_ops_bss_info_changed: arp filtering: 1 addresses (implement)
[ 13.462454] videodev: Linux video capture interface: v2.00
[ 13.780298] nouveau 0000:02:00.0: DRM: VRAM: 256 MiB
[ 13.780311] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
[ 13.780319] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
[ 13.780324] nouveau 0000:02:00.0: DRM: DCB version 4.0
[ 13.780329] nouveau 0000:02:00.0: DRM: DCB outp 00: 040001b6 0f220010
[ 13.780336] nouveau 0000:02:00.0: DRM: DCB outp 01: 020112a6 0f220010
[ 13.780340] nouveau 0000:02:00.0: DRM: DCB outp 02: 02011262 00020010
[ 13.780346] nouveau 0000:02:00.0: DRM: DCB conn 00: 00002047
[ 13.780350] nouveau 0000:02:00.0: DRM: DCB conn 01: 00101146
[ 13.821923] nouveau 0000:02:00.0: DRM: MM: using M2MF for buffer copies
[ 13.983958] usb 1-6: Found UVC 1.00 device Built-in iSight (05ac:850a)
[ 14.030287] input: Built-in iSight: Built-in iSigh as /devices/pci0000:00/0000:00:04.1/usb1/1-6/1-6:1.0/input/input13
[ 14.033367] usbcore: registered new interface driver uvcvideo
[ 14.602338] nouveau 0000:02:00.0: DRM: allocated 1366x768 fb: 0x50000, bo 00000000fb5f723e
[ 14.606143] fbcon: nouveau (fb0) is primary device
[ 14.759990] Console: switching to colour frame buffer device 170x48
[ 14.830068] mousedev: PS/2 mouse device common for all mice
[ 14.864073] nouveau 0000:02:00.0: [drm] fb0: nouveau frame buffer device
[ 14.893477] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
[ 15.505388] Bluetooth: Core ver 2.22
[ 15.506871] NET: Registered PF_BLUETOOTH protocol family
[ 15.506878] Bluetooth: HCI device and connection manager initialized
[ 15.506888] Bluetooth: HCI socket layer initialized
[ 15.506894] Bluetooth: L2CAP socket layer initialized
[ 15.506906] Bluetooth: SCO socket layer initialized
[ 15.976864] usbcore: registered new interface driver btusb
[ 16.018268] usb 3-5.1: USB disconnect, device number 5
[ 16.097301] Bluetooth: hci0: BCM: chip id 19 build 0848
[ 16.100294] Bluetooth: hci0: BCM: product 05ac:821b
[ 16.103297] Bluetooth: hci0: BCM: features 0x07
[ 16.121302] Bluetooth: hci0: Apple Bluetooth Device
[ 16.246277] usb 3-5.2: USB disconnect, device number 6
[-- Attachment #5: Type: text/plain, Size: 21 bytes --]
Regards.
Yuji Nakao
[-- Attachment #6.1: Type: text/plain, Size: 0 bytes --]
[-- Attachment #6.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 865 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel 5.15 doesn't detect SATA drive on boot
2021-11-17 13:52 ` Yuji Nakao
@ 2021-11-17 14:20 ` Marc Zyngier
0 siblings, 0 replies; 14+ messages in thread
From: Marc Zyngier @ 2021-11-17 14:20 UTC (permalink / raw)
To: Yuji Nakao
Cc: Krzysztof Wilczyński, Damien Le Moal, linux-kernel,
linux-pci, . Bjorn Helgaas, Arnd Bergmann, Sasha Levin
>
> I installed plane 5.16-rc1 using pre-built image[1] by linux-mainline
> aur package[2] maintainer and 5.16-rc1 with the patch provided from
> Mark. Both versions succeeded to boot. Thank you for quick
> investigation. I'll wait for backporting the fix.
So vanilla 5.16-rc1 works correctly on your machine, without any other
patch?
If so, I don't know what fixed it. Someone with the right HW should
try and identify the fix so that we can backport it.
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel 5.15 doesn't detect SATA drive on boot
2021-11-16 23:54 ` Krzysztof Wilczyński
@ 2021-11-17 16:24 ` Jeremy Soller
0 siblings, 0 replies; 14+ messages in thread
From: Jeremy Soller @ 2021-11-17 16:24 UTC (permalink / raw)
To: Krzysztof Wilczyński, Damien Le Moal
Cc: Yuji Nakao, linux-kernel, linux-pci, . Bjorn Helgaas,
Marc Zyngier, Arnd Bergmann, Sasha Levin
We are using 5.15.2 right now on Pop!_OS 21.10 but have not seen SATA issues yet. I'll look into this,
and hope it makes it into a 5.15 release soon!
--
Jeremy Soller
System76
Principal Engineer
jeremy@system76.com
On Tue, Nov 16, 2021, at 4:54 PM, Krzysztof Wilczyński wrote:
> [+CC Adding Jeremy for visibility]
>
> Hi Damien,
>
> [...]
>> > The error in the dmesg output (see [2] where the log file is attached)
>> > looks similar to the problem reported a week or so ago, as per:
>> >
>> > https://lore.kernel.org/linux-pci/ee3884db-da17-39e3-4010-bcc8f878e2f6@xenosoft.de/
>>
>> Thanks. I searched this thread but could not find it in the archive.
>> Early morning, need more coffee :)
>
> No worries! Got you covered!
>
> )))
> (((
> +-----+
> | |]
> `-----'
>
> Enjoy!
>
>>
>> >
>> > The problematic commits where reverted by Bjorn and the Pull Request that
>> > did it was accepted, as per:
>> >
>> > https://lore.kernel.org/linux-pci/20211111195040.GA1345641@bhelgaas/
>> >
>> > Thus, this would made its way into 5.16-rc1, I suppose. We might have to
>> > back-port this to the stable and long-term kernels.
>>
>> Yes, I think the fix needs to go in 5.15, which is latest stable and LTS.
>
> On the plus side, not everyone is on 5.15 yet, but those who are using it would
> have some issues. Albeit, with it being an LTS release, the adoption might
> increase rapidly.
>
> For instance, I believe that Pop!_OS already ships kernels that are very close
> to the upstream, which would hit their current user base.
>
> Krzysztof
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel 5.15 doesn't detect SATA drive on boot
2021-11-17 9:36 ` Krzysztof Wilczyński
@ 2021-11-21 15:41 ` Maxym Synytsky
2021-11-21 19:58 ` Marc Zyngier
0 siblings, 1 reply; 14+ messages in thread
From: Maxym Synytsky @ 2021-11-21 15:41 UTC (permalink / raw)
To: Krzysztof Wilczyński
Cc: Marc Zyngier, Yuji Nakao, Damien Le Moal, linux-kernel,
linux-pci, . Bjorn Helgaas, Arnd Bergmann, Sasha Levin
[-- Attachment #1: Type: text/plain, Size: 1592 bytes --]
On Wed, 17 Nov 2021 10:36:08 +0100
Krzysztof Wilczyński <kw@linux.com> wrote:
> > > > I think that this problem is due to recent PCI subsystem changes which
> > > > broke Mac support. The problem show up as the interrupts not being
> > > > delivered, which in turn result in the kernel assuming that the drive
> > > > is not working (see the timeout error messages in your dmesg output).
> > > > Hence your boot drive detection fails and no rootfs to mount.
> > > >
> > > > Adding linux-pci list.
> > > >
> > > >
>
> > The issue is instead very close to the one reported at [1], for which
> > we have a very conservative workaround in 5.16-rc1 (commits
> > 2226667a145d and f21082fb20db). Looking at the dmesg log provided by
> > Yugi, you find the following nugget:
> >
> > [ 0.378564] pci 0000:00:0a.0: [10de:0d88] type 00 class 0x010601
> >
> > Oh look, a NVIDIA AHCI controller, probably similar enough to the one
> > discussed in the issue reported by Rui.
>
> Good to know for the future reference that these can be problematic.
>
Hi.
I am also experiencing this issue on Gigabyte GA-M720-US3 mobo which uses
NVIDIA nForce 720D chipset. As I understand from the quirks patch it does not
fix my controller?
$ bunzip2 -ck dmesg_nForce_720D.txt.bz2 | grep 0x010601
[ 0.299980] pci 0000:00:09.0: [10de:0ad4] type 00 class 0x010601
In addition to the absense of devices during boot it takes minutes for this PC
on 5.15 to proceed from loading initramfs image to starting system from it.
I am attaching my dmesg just in case.
Max.
[-- Attachment #2: dmesg_nForce_720D.txt.bz2 --]
[-- Type: application/x-bzip, Size: 18303 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel 5.15 doesn't detect SATA drive on boot
2021-11-21 15:41 ` Maxym Synytsky
@ 2021-11-21 19:58 ` Marc Zyngier
2021-11-21 20:48 ` Maxym Synytsky
0 siblings, 1 reply; 14+ messages in thread
From: Marc Zyngier @ 2021-11-21 19:58 UTC (permalink / raw)
To: Maxym Synytsky
Cc: Krzysztof Wilczyński, Yuji Nakao, Damien Le Moal,
linux-kernel, linux-pci, . Bjorn Helgaas, Arnd Bergmann,
Sasha Levin
On Sun, 21 Nov 2021 15:41:18 +0000,
Maxym Synytsky <synytsky@dedrozeba.org.ua> wrote:
>
> Hi.
> I am also experiencing this issue on Gigabyte GA-M720-US3 mobo which uses
> NVIDIA nForce 720D chipset. As I understand from the quirks patch it does not
> fix my controller?
Are you sure? The dmesg you attached to this email shows otherwise:
[ 0.766490] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.766634] ata1.00: ATA-10: KINGSTON SA400S37120G, 03150002, max UDMA/133
[ 0.766641] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32)
[ 0.769825] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.769845] ata2: SATA link down (SStatus 0 SControl 300)
[ 0.769865] ata5: SATA link down (SStatus 0 SControl 300)
[ 0.769876] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.769894] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.772046] ata1.00: configured for UDMA/133
[ 0.772218] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 0002 PQ: 0 ANSI: 5
[ 0.772503] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 0.772520] sd 0:0:0:0: [sda] Write Protect is off
[ 0.772523] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.772538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.773190] sda: sda1 sda2
[ 0.789894] sd 0:0:0:0: [sda] Attached SCSI disk
From the above, I can only conclude that your SATA controller is up
and running.
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel 5.15 doesn't detect SATA drive on boot
2021-11-21 19:58 ` Marc Zyngier
@ 2021-11-21 20:48 ` Maxym Synytsky
2021-11-21 21:09 ` Marc Zyngier
0 siblings, 1 reply; 14+ messages in thread
From: Maxym Synytsky @ 2021-11-21 20:48 UTC (permalink / raw)
To: Marc Zyngier
Cc: Krzysztof Wilczyński, Yuji Nakao, Damien Le Moal,
linux-kernel, linux-pci, . Bjorn Helgaas, Arnd Bergmann,
Sasha Levin
On Sun, 21 Nov 2021 19:58:31 +0000
Marc Zyngier <maz@kernel.org> wrote:
> > Hi.
> > I am also experiencing this issue on Gigabyte GA-M720-US3 mobo which uses
> > NVIDIA nForce 720D chipset. As I understand from the quirks patch it does
> > not fix my controller?
>
> Are you sure? The dmesg you attached to this email shows otherwise:
>
Yes, this dmesg is for 5.14 kernel which works fine.
For some reason Arch complains in initramfs that root is locked and I am not
dropped to recovery shell so getting dmesg for 5.15 would be tricky for me.
Max.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Kernel 5.15 doesn't detect SATA drive on boot
2021-11-21 20:48 ` Maxym Synytsky
@ 2021-11-21 21:09 ` Marc Zyngier
0 siblings, 0 replies; 14+ messages in thread
From: Marc Zyngier @ 2021-11-21 21:09 UTC (permalink / raw)
To: Maxym Synytsky
Cc: Krzysztof Wilczyński, Yuji Nakao, Damien Le Moal,
linux-kernel, linux-pci, . Bjorn Helgaas, Arnd Bergmann,
Sasha Levin
On Sun, 21 Nov 2021 20:48:02 +0000,
Maxym Synytsky <synytsky@dedrozeba.org.ua> wrote:
>
> On Sun, 21 Nov 2021 19:58:31 +0000
> Marc Zyngier <maz@kernel.org> wrote:
>
> > > Hi.
> > > I am also experiencing this issue on Gigabyte GA-M720-US3 mobo which uses
> > > NVIDIA nForce 720D chipset. As I understand from the quirks patch it does
> > > not fix my controller?
> >
> > Are you sure? The dmesg you attached to this email shows otherwise:
> >
> Yes, this dmesg is for 5.14 kernel which works fine.
Well, that's not exactly useful to debug your problem, is it? What
makes you think that you are suffering from the same issue if you
can't look at the kernel messages?
> For some reason Arch complains in initramfs that root is locked and I am not
> dropped to recovery shell so getting dmesg for 5.15 would be tricky for me.
Can you please try 5.16-rc1? If it doesn't work, try the following
hack on top of -rc1. But that's a complete shot in the dark, and
without more details on what is going on, there is only so much I can
do.
M.
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 003950c738d2..6ac0f0b14130 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5852,8 +5852,10 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_PERICOM, 0x2303,
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_PERICOM, 0x2303,
pci_fixup_pericom_acs_store_forward);
-static void nvidia_ion_ahci_fixup(struct pci_dev *pdev)
+static void nvidia_ahci_fixup(struct pci_dev *pdev)
{
pdev->dev_flags |= PCI_DEV_FLAGS_HAS_MSI_MASKING;
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0ab8, nvidia_ion_ahci_fixup);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_SATA_AHCI, 8,
+ nvidia_ahci_fixup);
--
Without deviation from the norm, progress is not possible.
^ permalink raw reply related [flat|nested] 14+ messages in thread
end of thread, other threads:[~2021-11-21 21:09 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-16 12:44 Kernel 5.15 doesn't detect SATA drive on boot Yuji Nakao
2021-11-16 23:05 ` Damien Le Moal
2021-11-16 23:26 ` Krzysztof Wilczyński
2021-11-16 23:40 ` Damien Le Moal
2021-11-16 23:54 ` Krzysztof Wilczyński
2021-11-17 16:24 ` Jeremy Soller
2021-11-17 9:07 ` Marc Zyngier
2021-11-17 9:36 ` Krzysztof Wilczyński
2021-11-21 15:41 ` Maxym Synytsky
2021-11-21 19:58 ` Marc Zyngier
2021-11-21 20:48 ` Maxym Synytsky
2021-11-21 21:09 ` Marc Zyngier
2021-11-17 13:52 ` Yuji Nakao
2021-11-17 14:20 ` Marc Zyngier
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).