* [PATCH v3] m68k: Enable memtest functionality
@ 2021-11-18 22:29 Finn Thain
2021-11-21 6:29 ` Mike Rapoport
2021-11-29 10:07 ` Geert Uytterhoeven
0 siblings, 2 replies; 3+ messages in thread
From: Finn Thain @ 2021-11-18 22:29 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Mike Rapoport, Sam Creasey, Jonathan Corbet, linux-doc,
linux-kernel, linux-m68k
Enable the memtest functionality and rearrange some code to prevent it
from clobbering the initrd.
The code to implement CONFIG_BLK_DEV_INITRD was conditional on
!defined(CONFIG_SUN3). For simplicity, remove that test on the basis
that m68k_ramdisk.size == 0 on Sun 3. The SLIME source code at
http://sammy.net/sun3/ftp/pub/m68k/sun3/slime/slime-2.0.tar.gz
indicates that no BI_RAMDISK entry is ever passed to the kernel due
to #ifdef 0 around the relevant code.
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
---
Is SLIME the only Linux bootloader on Sun 3?
---
Changed since v2:
- Made conditional on MMU_MOTOROLA.
Changed since v1:
- Updated documentation.
---
Documentation/admin-guide/kernel-parameters.txt | 2 +-
arch/m68k/Kconfig | 1 +
arch/m68k/kernel/setup_mm.c | 15 ++++++---------
arch/m68k/mm/motorola.c | 2 ++
4 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 43dc35fe5bc0..ac42b421a95c 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2924,7 +2924,7 @@
both parameters are enabled, hugetlb_free_vmemmap takes
precedence over memory_hotplug.memmap_on_memory.
- memtest= [KNL,X86,ARM,PPC,RISCV] Enable memtest
+ memtest= [KNL,X86,ARM,M68K,PPC,RISCV] Enable memtest
Format: <integer>
default : 0 <disable>
Specifies the number of memtest passes to be
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 0b50da08a9c5..4cae3fbe7f97 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -9,6 +9,7 @@ config M68K
select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
select ARCH_MIGHT_HAVE_PC_PARPORT if ISA
select ARCH_NO_PREEMPT if !COLDFIRE
+ select ARCH_USE_MEMTEST if MMU_MOTOROLA
select ARCH_WANT_IPC_PARSE_VERSION
select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
select DMA_DIRECT_REMAP if HAS_DMA && MMU && !COLDFIRE
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index 4b51bfd38e5f..49e573b94326 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -338,13 +338,6 @@ void __init setup_arch(char **cmdline_p)
panic("No configuration setup");
}
- paging_init();
-
-#ifdef CONFIG_NATFEAT
- nf_init();
-#endif
-
-#ifndef CONFIG_SUN3
#ifdef CONFIG_BLK_DEV_INITRD
if (m68k_ramdisk.size) {
memblock_reserve(m68k_ramdisk.addr, m68k_ramdisk.size);
@@ -354,6 +347,12 @@ void __init setup_arch(char **cmdline_p)
}
#endif
+ paging_init();
+
+#ifdef CONFIG_NATFEAT
+ nf_init();
+#endif
+
#ifdef CONFIG_ATARI
if (MACH_IS_ATARI)
atari_stram_reserve_pages((void *)availmem);
@@ -364,8 +363,6 @@ void __init setup_arch(char **cmdline_p)
}
#endif
-#endif /* !CONFIG_SUN3 */
-
/* set ISA defs early as possible */
#if defined(CONFIG_ISA) && defined(MULTI_ISA)
if (MACH_IS_Q40) {
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 9f3f77785aa7..5b6575eb6d02 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -455,6 +455,8 @@ void __init paging_init(void)
flush_tlb_all();
+ early_memtest(min_addr, max_addr);
+
/*
* initialize the bad page table and bad page to point
* to a couple of allocated pages
--
2.26.3
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v3] m68k: Enable memtest functionality
2021-11-18 22:29 [PATCH v3] m68k: Enable memtest functionality Finn Thain
@ 2021-11-21 6:29 ` Mike Rapoport
2021-11-29 10:07 ` Geert Uytterhoeven
1 sibling, 0 replies; 3+ messages in thread
From: Mike Rapoport @ 2021-11-21 6:29 UTC (permalink / raw)
To: Finn Thain
Cc: Geert Uytterhoeven, Sam Creasey, Jonathan Corbet, linux-doc,
linux-kernel, linux-m68k
On Fri, Nov 19, 2021 at 09:29:38AM +1100, Finn Thain wrote:
> Enable the memtest functionality and rearrange some code to prevent it
> from clobbering the initrd.
>
> The code to implement CONFIG_BLK_DEV_INITRD was conditional on
> !defined(CONFIG_SUN3). For simplicity, remove that test on the basis
> that m68k_ramdisk.size == 0 on Sun 3. The SLIME source code at
> http://sammy.net/sun3/ftp/pub/m68k/sun3/slime/slime-2.0.tar.gz
> indicates that no BI_RAMDISK entry is ever passed to the kernel due
> to #ifdef 0 around the relevant code.
>
> Cc: Mike Rapoport <rppt@kernel.org>
> Cc: Sam Creasey <sammy@sammy.net>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
> ---
> Is SLIME the only Linux bootloader on Sun 3?
> ---
> Changed since v2:
> - Made conditional on MMU_MOTOROLA.
>
> Changed since v1:
> - Updated documentation.
> ---
> Documentation/admin-guide/kernel-parameters.txt | 2 +-
> arch/m68k/Kconfig | 1 +
> arch/m68k/kernel/setup_mm.c | 15 ++++++---------
> arch/m68k/mm/motorola.c | 2 ++
> 4 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 43dc35fe5bc0..ac42b421a95c 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -2924,7 +2924,7 @@
> both parameters are enabled, hugetlb_free_vmemmap takes
> precedence over memory_hotplug.memmap_on_memory.
>
> - memtest= [KNL,X86,ARM,PPC,RISCV] Enable memtest
> + memtest= [KNL,X86,ARM,M68K,PPC,RISCV] Enable memtest
> Format: <integer>
> default : 0 <disable>
> Specifies the number of memtest passes to be
> diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
> index 0b50da08a9c5..4cae3fbe7f97 100644
> --- a/arch/m68k/Kconfig
> +++ b/arch/m68k/Kconfig
> @@ -9,6 +9,7 @@ config M68K
> select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
> select ARCH_MIGHT_HAVE_PC_PARPORT if ISA
> select ARCH_NO_PREEMPT if !COLDFIRE
> + select ARCH_USE_MEMTEST if MMU_MOTOROLA
> select ARCH_WANT_IPC_PARSE_VERSION
> select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
> select DMA_DIRECT_REMAP if HAS_DMA && MMU && !COLDFIRE
> diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
> index 4b51bfd38e5f..49e573b94326 100644
> --- a/arch/m68k/kernel/setup_mm.c
> +++ b/arch/m68k/kernel/setup_mm.c
> @@ -338,13 +338,6 @@ void __init setup_arch(char **cmdline_p)
> panic("No configuration setup");
> }
>
> - paging_init();
> -
> -#ifdef CONFIG_NATFEAT
> - nf_init();
> -#endif
> -
> -#ifndef CONFIG_SUN3
> #ifdef CONFIG_BLK_DEV_INITRD
> if (m68k_ramdisk.size) {
> memblock_reserve(m68k_ramdisk.addr, m68k_ramdisk.size);
> @@ -354,6 +347,12 @@ void __init setup_arch(char **cmdline_p)
> }
> #endif
>
> + paging_init();
> +
> +#ifdef CONFIG_NATFEAT
> + nf_init();
> +#endif
> +
> #ifdef CONFIG_ATARI
> if (MACH_IS_ATARI)
> atari_stram_reserve_pages((void *)availmem);
> @@ -364,8 +363,6 @@ void __init setup_arch(char **cmdline_p)
> }
> #endif
>
> -#endif /* !CONFIG_SUN3 */
> -
> /* set ISA defs early as possible */
> #if defined(CONFIG_ISA) && defined(MULTI_ISA)
> if (MACH_IS_Q40) {
> diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
> index 9f3f77785aa7..5b6575eb6d02 100644
> --- a/arch/m68k/mm/motorola.c
> +++ b/arch/m68k/mm/motorola.c
> @@ -455,6 +455,8 @@ void __init paging_init(void)
>
> flush_tlb_all();
>
> + early_memtest(min_addr, max_addr);
> +
> /*
> * initialize the bad page table and bad page to point
> * to a couple of allocated pages
> --
> 2.26.3
>
--
Sincerely yours,
Mike.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v3] m68k: Enable memtest functionality
2021-11-18 22:29 [PATCH v3] m68k: Enable memtest functionality Finn Thain
2021-11-21 6:29 ` Mike Rapoport
@ 2021-11-29 10:07 ` Geert Uytterhoeven
1 sibling, 0 replies; 3+ messages in thread
From: Geert Uytterhoeven @ 2021-11-29 10:07 UTC (permalink / raw)
To: Finn Thain
Cc: Mike Rapoport, Sam Creasey, Jonathan Corbet,
open list:DOCUMENTATION, Linux Kernel Mailing List, linux-m68k
On Thu, Nov 18, 2021 at 11:32 PM Finn Thain <fthain@linux-m68k.org> wrote:
> Enable the memtest functionality and rearrange some code to prevent it
> from clobbering the initrd.
>
> The code to implement CONFIG_BLK_DEV_INITRD was conditional on
> !defined(CONFIG_SUN3). For simplicity, remove that test on the basis
> that m68k_ramdisk.size == 0 on Sun 3. The SLIME source code at
> http://sammy.net/sun3/ftp/pub/m68k/sun3/slime/slime-2.0.tar.gz
> indicates that no BI_RAMDISK entry is ever passed to the kernel due
> to #ifdef 0 around the relevant code.
>
> Cc: Mike Rapoport <rppt@kernel.org>
> Cc: Sam Creasey <sammy@sammy.net>
> Cc: Jonathan Corbet <corbet@lwn.net>
> Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
i.e. will queue in the m68k for-v5.17 branch.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-11-29 10:09 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-18 22:29 [PATCH v3] m68k: Enable memtest functionality Finn Thain
2021-11-21 6:29 ` Mike Rapoport
2021-11-29 10:07 ` Geert Uytterhoeven
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).