From: Rob Herring <robh@kernel.org>
To: Shawn Guo <shawn.guo@linaro.org>
Cc: Georgi Djakov <djakov@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Loic Poulain <loic.poulain@linaro.org>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 5/6] dt-bindings: interconnect: Add Qualcomm QCM2290 NoC support
Date: Mon, 29 Nov 2021 20:23:20 -0600 [thread overview]
Message-ID: <YaWLGAvZJ1dZwWNj@robh.at.kernel.org> (raw)
In-Reply-To: <20211122085123.21049-6-shawn.guo@linaro.org>
On Mon, Nov 22, 2021 at 04:51:22PM +0800, Shawn Guo wrote:
> Add bindings for Qualcomm QCM2290 Network-On-Chip interconnect devices.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
> .../bindings/interconnect/qcom,qcm2290.yaml | 116 ++++++++++++++++++
> .../dt-bindings/interconnect/qcom,qcm2290.h | 94 ++++++++++++++
> 2 files changed, 210 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
> create mode 100644 include/dt-bindings/interconnect/qcom,qcm2290.h
>
> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
> new file mode 100644
> index 000000000000..fb5e62196d9a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
> @@ -0,0 +1,116 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interconnect/qcom,qcm2290.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm QCM2290 Network-On-Chip interconnect
> +
> +maintainers:
> + - Shawn Guo <shawn.guo@linaro.org>
> +
> +description: |
> + The Qualcomm QCM2290 interconnect providers support adjusting the
> + bandwidth requirements between the various NoC fabrics.
> +
> +properties:
> + reg:
> + maxItems: 1
> +
> + compatible:
> + enum:
> + - qcom,qcm2290-bimc
> + - qcom,qcm2290-cnoc
> + - qcom,qcm2290-snoc
> + - qcom,qcm2290-qup-virt
> + - qcom,qcm2290-mmrt-virt
> + - qcom,qcm2290-mmnrt-virt
> +
> + '#interconnect-cells':
> + const: 1
> +
> + clock-names:
> + items:
> + - const: bus
> + - const: bus_a
> +
> + clocks:
> + items:
> + - description: Bus Clock
> + - description: Bus A Clock
> +
> +required:
> + - compatible
> + - '#interconnect-cells'
> + - clock-names
> + - clocks
> +
> +additionalProperties: true
Nope. You have to define the child nodes. Though the 'virt' looks
suspicious.
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - qcom,qcm2290-bimc
> + - qcom,qcm2290-cnoc
> + - qcom,qcm2290-snoc
> + then:
> + required:
> + - reg
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,rpmcc.h>
> +
> + snoc: interconnect@1880000 {
> + compatible = "qcom,qcm2290-snoc";
> + reg = <0x01880000 0x60200>;
> + #interconnect-cells = <1>;
> + clock-names = "bus", "bus_a";
> + clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
> + <&rpmcc RPM_SMD_SNOC_A_CLK>;
> +
> + qup_virt: interconnect-qup {
> + compatible = "qcom,qcm2290-qup-virt";
> + #interconnect-cells = <1>;
> + clock-names = "bus", "bus_a";
> + clocks = <&rpmcc RPM_SMD_QUP_CLK>,
> + <&rpmcc RPM_SMD_QUP_A_CLK>;
> + };
> +
> + mmnrt_virt: interconnect-mmnrt {
> + compatible = "qcom,qcm2290-mmnrt-virt";
> + #interconnect-cells = <1>;
> + clock-names = "bus", "bus_a";
> + clocks = <&rpmcc RPM_SMD_MMNRT_CLK>,
> + <&rpmcc RPM_SMD_MMNRT_A_CLK>;
> + };
> +
> + mmrt_virt: interconnect-mmrt {
> + compatible = "qcom,qcm2290-mmrt-virt";
> + #interconnect-cells = <1>;
> + clock-names = "bus", "bus_a";
> + clocks = <&rpmcc RPM_SMD_MMRT_CLK>,
> + <&rpmcc RPM_SMD_MMRT_A_CLK>;
> + };
> + };
> +
> + cnoc: interconnect@1900000 {
> + compatible = "qcom,qcm2290-cnoc";
> + reg = <0x01900000 0x8200>;
> + #interconnect-cells = <1>;
> + clock-names = "bus", "bus_a";
> + clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
> + <&rpmcc RPM_SMD_CNOC_A_CLK>;
> + };
> +
> + bimc: interconnect@4480000 {
> + compatible = "qcom,qcm2290-bimc";
> + reg = <0x04480000 0x80000>;
> + #interconnect-cells = <1>;
> + clock-names = "bus", "bus_a";
> + clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
> + <&rpmcc RPM_SMD_BIMC_A_CLK>;
> + };
> diff --git a/include/dt-bindings/interconnect/qcom,qcm2290.h b/include/dt-bindings/interconnect/qcom,qcm2290.h
> new file mode 100644
> index 000000000000..6cbbb7fe0bd3
> --- /dev/null
> +++ b/include/dt-bindings/interconnect/qcom,qcm2290.h
> @@ -0,0 +1,94 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* QCM2290 interconnect IDs */
> +
> +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_QCM2290_H
> +#define __DT_BINDINGS_INTERCONNECT_QCOM_QCM2290_H
> +
> +/* BIMC */
> +#define MASTER_APPSS_PROC 0
> +#define MASTER_SNOC_BIMC_RT 1
> +#define MASTER_SNOC_BIMC_NRT 2
> +#define MASTER_SNOC_BIMC 3
> +#define MASTER_TCU_0 4
> +#define MASTER_GFX3D 5
> +#define SLAVE_EBI1 6
> +#define SLAVE_BIMC_SNOC 7
> +
> +/* CNOC */
> +#define MASTER_SNOC_CNOC 0
> +#define MASTER_QDSS_DAP 1
> +#define SLAVE_BIMC_CFG 2
> +#define SLAVE_CAMERA_NRT_THROTTLE_CFG 3
> +#define SLAVE_CAMERA_RT_THROTTLE_CFG 4
> +#define SLAVE_CAMERA_CFG 5
> +#define SLAVE_CLK_CTL 6
> +#define SLAVE_CRYPTO_0_CFG 7
> +#define SLAVE_DISPLAY_CFG 8
> +#define SLAVE_DISPLAY_THROTTLE_CFG 9
> +#define SLAVE_GPU_CFG 10
> +#define SLAVE_HWKM 11
> +#define SLAVE_IMEM_CFG 12
> +#define SLAVE_IPA_CFG 13
> +#define SLAVE_LPASS 14
> +#define SLAVE_MESSAGE_RAM 15
> +#define SLAVE_PDM 16
> +#define SLAVE_PIMEM_CFG 17
> +#define SLAVE_PKA_WRAPPER 18
> +#define SLAVE_PMIC_ARB 19
> +#define SLAVE_PRNG 20
> +#define SLAVE_QDSS_CFG 21
> +#define SLAVE_QM_CFG 22
> +#define SLAVE_QM_MPU_CFG 23
> +#define SLAVE_QPIC 24
> +#define SLAVE_QUP_0 25
> +#define SLAVE_SDCC_1 26
> +#define SLAVE_SDCC_2 27
> +#define SLAVE_SNOC_CFG 28
> +#define SLAVE_TCSR 29
> +#define SLAVE_USB3 30
> +#define SLAVE_VENUS_CFG 31
> +#define SLAVE_VENUS_THROTTLE_CFG 32
> +#define SLAVE_VSENSE_CTRL_CFG 33
> +#define SLAVE_SERVICE_CNOC 34
> +
> +/* SNOC */
> +#define MASTER_CRYPTO_CORE0 0
> +#define MASTER_SNOC_CFG 1
> +#define MASTER_TIC 2
> +#define MASTER_ANOC_SNOC 3
> +#define MASTER_BIMC_SNOC 4
> +#define MASTER_PIMEM 5
> +#define MASTER_QDSS_BAM 6
> +#define MASTER_QUP_0 7
> +#define MASTER_IPA 8
> +#define MASTER_QDSS_ETR 9
> +#define MASTER_SDCC_1 10
> +#define MASTER_SDCC_2 11
> +#define MASTER_QPIC 12
> +#define MASTER_USB3_0 13
> +#define SLAVE_APPSS 14
> +#define SLAVE_SNOC_CNOC 15
> +#define SLAVE_IMEM 16
> +#define SLAVE_PIMEM 17
> +#define SLAVE_SNOC_BIMC 18
> +#define SLAVE_SERVICE_SNOC 19
> +#define SLAVE_QDSS_STM 20
> +#define SLAVE_TCU 21
> +#define SLAVE_ANOC_SNOC 22
> +
> +/* QUP Virtual */
> +#define MASTER_QUP_CORE_0 0
> +#define SLAVE_QUP_CORE_0 1
> +
> +/* MMNRT Virtual */
> +#define MASTER_CAMNOC_SF 0
> +#define MASTER_VIDEO_P0 1
> +#define MASTER_VIDEO_PROC 2
> +#define SLAVE_SNOC_BIMC_NRT 3
> +
> +/* MMRT Virtual */
> +#define MASTER_CAMNOC_HF 0
> +#define MASTER_MDP0 1
> +#define SLAVE_SNOC_BIMC_RT 2
> +
> +#endif
> --
> 2.17.1
>
>
next prev parent reply other threads:[~2021-11-30 2:23 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-22 8:51 [PATCH v2 0/6] Add QCM2290 interconnect support Shawn Guo
2021-11-22 8:51 ` [PATCH v2 1/6] interconnect: icc-rpm: Use NOC_QOS_MODE_INVALID for qos_mode check Shawn Guo
2021-11-22 8:51 ` [PATCH v2 2/6] interconnect: icc-rpm: Define ICC device type Shawn Guo
2021-11-22 8:51 ` [PATCH v2 3/6] interconnect: icc-rpm: Add QNOC type QoS support Shawn Guo
2021-11-22 8:51 ` [PATCH v2 4/6] interconnect: icc-rpm: Support child NoC device probe Shawn Guo
2021-11-22 8:51 ` [PATCH v2 5/6] dt-bindings: interconnect: Add Qualcomm QCM2290 NoC support Shawn Guo
2021-11-30 2:23 ` Rob Herring [this message]
2021-11-30 2:49 ` Shawn Guo
2021-11-22 8:51 ` [PATCH v2 6/6] interconnect: qcom: Add QCM2290 driver support Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YaWLGAvZJ1dZwWNj@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=djakov@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).