From: Rob Herring <robh@kernel.org>
To: Cosmin Tanislav <demonsingur@gmail.com>
Cc: cosmin.tanislav@analog.com, Lars-Peter Clausen <lars@metafoo.de>,
Michael Hennerich <Michael.Hennerich@analog.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] dt-bindings: iio: accel: add ADXL367
Date: Wed, 15 Dec 2021 09:54:26 -0600 [thread overview]
Message-ID: <YboPssR4TaxBFkBq@robh.at.kernel.org> (raw)
In-Reply-To: <20211207094337.59300-2-cosmin.tanislav@analog.com>
On Tue, Dec 07, 2021 at 11:43:36AM +0200, Cosmin Tanislav wrote:
> The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.
>
> The ADXL367 does not alias input signals to achieve ultralow power
> consumption, it samples the full bandwidth of the sensor at all
> data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
> with a resolution of 0.25mg/LSB on the +-2 g range.
>
> In addition to its ultralow power consumption, the ADXL367
> has many features to enable true system level power reduction.
> It includes a deep multimode output FIFO, a built-in micropower
> temperature sensor, and an internal ADC for synchronous conversion
> of an additional analog input.
>
> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
> ---
> .../bindings/iio/accel/adi,adxl367.yaml | 79 +++++++++++++++++++
> 1 file changed, 79 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
> new file mode 100644
> index 000000000000..b3c140dfbe2f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accel/adi,adxl367.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADXL367 3-Axis Digital Accelerometer
> +
> +maintainers:
> + - Cosmin Tanislav <cosmin.tanislav@analog.com>
> +
> +description: |
> + The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.
> +
> + The ADXL367 does not alias input signals by to achieve ultralow power
> + consumption, it samples the full bandwidth of the sensor at all
> + data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
> + with a resolution of 0.25mg/LSB on the +-2 g range.
> +
> + In addition to its ultralow power consumption, the ADXL367
> + has many features to enable true system level power reduction.
> + It includes a deep multimode output FIFO, a built-in micropower
> + temperature sensor, and an internal ADC for synchronous conversion
> + of an additional analog input.
> + https://www.analog.com/en/products/adxl367.html
> +
> +properties:
> + compatible:
> + enum:
> + - adi,adxl367
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + spi-max-frequency: true
> +
> + vdd-supply: true
> + vddio-supply: true
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + adxl367@53 {
> + compatible = "adi,adxl367";
> + reg = <0x53>;
> + interrupt-parent = <&gpio>;
> + interrupts = <25 IRQ_TYPE_EDGE_RISING>;
> + };
> + };
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + adxl367@0 {
accelerometer@0
With that,
Reviewed-by: Rob Herring <robh@kernel.org>
> + compatible = "adi,adxl367";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + interrupt-parent = <&gpio>;
> + interrupts = <25 IRQ_TYPE_EDGE_RISING>;
> + };
> + };
> --
> 2.34.1
>
>
next prev parent reply other threads:[~2021-12-15 16:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-07 9:43 [PATCH v2 0/2] Add ADXL367 driver Cosmin Tanislav
2021-12-07 9:43 ` [PATCH v2 1/2] dt-bindings: iio: accel: add ADXL367 Cosmin Tanislav
2021-12-15 15:54 ` Rob Herring [this message]
2021-12-07 9:43 ` [PATCH v2 2/2] iio: accel: add ADXL367 driver Cosmin Tanislav
2021-12-12 17:04 ` Jonathan Cameron
2021-12-12 19:25 ` Cosmin Tanislav
2021-12-16 12:15 ` Jonathan Cameron
2021-12-13 11:34 ` [PATCH v2 0/2] Add " Lars-Peter Clausen
2021-12-14 15:50 ` Sa, Nuno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YboPssR4TaxBFkBq@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=cosmin.tanislav@analog.com \
--cc=demonsingur@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).