Re: [PATCH] remoteproc: qcom: q6v5: fix service routines build errors

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Fri 14 Jan 19:13 CST 2022, Randy Dunlap wrote:

> When CONFIG_QCOM_AOSS_QMP=m and CONFIG_QCOM_Q6V5_MSS=y, the builtin
> driver cannot call into the loadable module's low-level service
> functions. Trying to build with that config combo causes linker errors.
> 
> There are two problems here. First, drivers/remoteproc/qcom_q6v5.c
> should #include <linux/soc/qcom/qcom_aoss.h> for the definitions of
> the service functions, depending on whether CONFIG_QCOM_AOSS_QMP is
> set/enabled or not. Second, the qcom remoteproc drivers should depend
> on QCOM_AOSS_QMP iff it is enabled (=y or =m) so that the qcom
> remoteproc drivers can be built properly.
> 
> This prevents these build errors:
> 
> aarch64-linux-ld: drivers/remoteproc/qcom_q6v5.o: in function `q6v5_load_state_toggle':
> qcom_q6v5.c:(.text+0xc4): undefined reference to `qmp_send'
> aarch64-linux-ld: drivers/remoteproc/qcom_q6v5.o: in function `qcom_q6v5_deinit':
> (.text+0x2e4): undefined reference to `qmp_put'
> aarch64-linux-ld: drivers/remoteproc/qcom_q6v5.o: in function `qcom_q6v5_init':
> (.text+0x778): undefined reference to `qmp_get'
> aarch64-linux-ld: (.text+0x7d8): undefined reference to `qmp_put'
> 
> Fixes: c1fe10d238c0 ("remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Reported-by: kernel test robot <lkp@intel.com>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: linux-remoteproc@vger.kernel.org
> Cc: Sibi Sankar <sibis@codeaurora.org>
> Cc: Stephen Boyd <swboyd@chromium.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  drivers/remoteproc/Kconfig     |    4 ++++
>  drivers/remoteproc/qcom_q6v5.c |    1 +
>  2 files changed, 5 insertions(+)
> 
> --- linux-next-20220114.orig/drivers/remoteproc/qcom_q6v5.c
> +++ linux-next-20220114/drivers/remoteproc/qcom_q6v5.c
> @@ -10,6 +10,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/interrupt.h>
>  #include <linux/module.h>
> +#include <linux/soc/qcom/qcom_aoss.h>
>  #include <linux/soc/qcom/smem.h>
>  #include <linux/soc/qcom/smem_state.h>
>  #include <linux/remoteproc.h>
> --- linux-next-20220114.orig/drivers/remoteproc/Kconfig
> +++ linux-next-20220114/drivers/remoteproc/Kconfig
> @@ -180,6 +180,7 @@ config QCOM_Q6V5_ADSP
>  	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
>  	depends on QCOM_SYSMON || QCOM_SYSMON=n
>  	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
> +	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
>  	select MFD_SYSCON
>  	select QCOM_PIL_INFO
>  	select QCOM_MDT_LOADER
> @@ -199,6 +200,7 @@ config QCOM_Q6V5_MSS
>  	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
>  	depends on QCOM_SYSMON || QCOM_SYSMON=n
>  	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
> +	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
>  	select MFD_SYSCON
>  	select QCOM_MDT_LOADER
>  	select QCOM_PIL_INFO
> @@ -218,6 +220,7 @@ config QCOM_Q6V5_PAS
>  	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
>  	depends on QCOM_SYSMON || QCOM_SYSMON=n
>  	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
> +	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
>  	select MFD_SYSCON
>  	select QCOM_PIL_INFO
>  	select QCOM_MDT_LOADER
> @@ -239,6 +242,7 @@ config QCOM_Q6V5_WCSS
>  	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
>  	depends on QCOM_SYSMON || QCOM_SYSMON=n
>  	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
> +	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
>  	select MFD_SYSCON
>  	select QCOM_MDT_LOADER
>  	select QCOM_PIL_INFO