Re: [PATCH 09/16] PCI: dwc: Simplify in/outbound iATU setup methods

[Rob Herring <robh@kernel.org>]

On Thu, Mar 24, 2022 at 04:37:27AM +0300, Serge Semin wrote:
> From maintainability and scalability points of view it has been wrong to
> use different iATU inbound and outbound regions accessors for the viewport
> and unrolled versions of the iATU CSRs mapping. Seeing the particular iATU
> region-wise registers layout is almost fully compatible for different
> IP-core versions, there were no much points in splitting the code up that
> way since it was possible to implement a common windows setup methods for
> both viewport and unrolled iATU CSRs spaces. While what we can observe in
> the current driver implementation of these methods, is a lot of code
> duplication, which consequently worsen the code readability,
> maintainability and scalability. Note the current implementation is a bit
> more performant than the one suggested in this commit since it implies
> having less MMIO accesses. But the gain just doesn't worth having the
> denoted difficulties especially seeing the iATU setup methods are mainly
> called on the DW PCIe controller and peripheral devices initialization
> stage.
> 
> Here we suggest to move the iATU viewport and unrolled CSR access
> specifics in the dw_pcie_readl_atu() and dw_pcie_writel_atu() method, and
> convert the dw_pcie_prog_outbound_atu() and
> dw_pcie_prog_{ep_}inbound_atu() functions to being generic instead of
> having a different methods for each viewport and unrolled types of iATU
> CSRs mapping. Nothing complex really. First of all the dw_pcie_readl_atu()
> and dw_pcie_writel_atu() are converted to accept relative iATU CSRs
> address together with the iATU region direction (inbound or outbound) and
> region index. If DW PCIe controller doesn't have the unrolled iATU CSRs
> space, then the accessors will need to activate a iATU viewport based on
> the specified direction and index, otherwise a base address for the
> corresponding region CSRs will be calculated by means of the
> PCIE_ATU_UNROLL_BASE() macro. The CSRs macro have been modified in
> accordance with that logic in the pcie-designware.h header file.
> 
> The rest of the changes in this commit just concern converting the iATU
> in-/out-bound setup methods and iATU regions detection procedure to be
> compatible with the new accessors semantics. As a result we've dropped the
> no more required dw_pcie_prog_outbound_atu_unroll(),
> dw_pcie_prog_inbound_atu_unroll() and dw_pcie_iatu_detect_regions_unroll()
> methods.
> 
> Note aside with the denoted code improvements, there is an additional
> positive side effect of this change. If at some point an atomic iATU
> configs setup procedure is required, it will be possible to be done with
> no much effort just by adding the synchronization into the
> dw_pcie_readl_atu() and dw_pcie_writel_atu() accessors.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> ---
>  drivers/pci/controller/dwc/pcie-designware.c | 301 ++++++-------------
>  drivers/pci/controller/dwc/pcie-designware.h |  50 ++-
>  2 files changed, 112 insertions(+), 239 deletions(-)

Nice diffstat. I didn't really like how this was implemented either.

I'm guessing you tested the unrolled case only? IIRC, QEMU has the older 
interface. I can also throw this at kernel-ci if needed. There's a few 
platforms with DWC that get tested.

> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index b983128584ff..f1aa6e2e85fe 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -205,48 +205,67 @@ void dw_pcie_write_dbi2(struct dw_pcie *pci, u32 reg, size_t size, u32 val)
>  		dev_err(pci->dev, "write DBI address failed\n");
>  }
>  
> -static u32 dw_pcie_readl_atu(struct dw_pcie *pci, u32 reg)
> +static u32 dw_pcie_readl_atu(struct dw_pcie *pci, u32 dir, u32 region, u32 reg)
>  {
> +	void __iomem *base;
>  	int ret;
>  	u32 val;
>  
> +	if (pci->iatu_unroll_enabled) {
> +		base = pci->atu_base;
> +		reg = reg + PCIE_ATU_UNROLL_BASE(dir, region);
> +	} else {
> +		base = pci->dbi_base;
> +		reg = reg + PCIE_ATU_VIEWPORT_BASE;
> +
> +		dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, dir | region);
> +	}
> +
>  	if (pci->ops && pci->ops->read_dbi)
> -		return pci->ops->read_dbi(pci, pci->atu_base, reg, 4);
> +		return pci->ops->read_dbi(pci, base, reg, 4);
>  
> -	ret = dw_pcie_read(pci->atu_base + reg, 4, &val);
> +	ret = dw_pcie_read(base + reg, 4, &val);
>  	if (ret)
>  		dev_err(pci->dev, "Read ATU address failed\n");
>  
>  	return val;
>  }
>  
> -static void dw_pcie_writel_atu(struct dw_pcie *pci, u32 reg, u32 val)
> +static void dw_pcie_writel_atu(struct dw_pcie *pci, u32 dir, u32 region,
> +			       u32 reg, u32 val)
>  {
> +	void __iomem *base;
>  	int ret;
>  
> +	if (pci->iatu_unroll_enabled) {
> +		base = pci->atu_base;
> +		reg = reg + PCIE_ATU_UNROLL_BASE(dir, region);
> +	} else {
> +		base = pci->dbi_base;
> +		reg = reg + PCIE_ATU_VIEWPORT_BASE;
> +
> +		dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, dir | region);
> +	}

You have this same sequence twice. Make it a helper function.

> +
>  	if (pci->ops && pci->ops->write_dbi) {
> -		pci->ops->write_dbi(pci, pci->atu_base, reg, 4, val);
> +		pci->ops->write_dbi(pci, base, reg, 4, val);
>  		return;
>  	}
>  
> -	ret = dw_pcie_write(pci->atu_base + reg, 4, val);
> +	ret = dw_pcie_write(base + reg, 4, val);
>  	if (ret)
>  		dev_err(pci->dev, "Write ATU address failed\n");
>  }
>  
> -static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg)
> +static inline u32 dw_pcie_readl_atu_ob(struct dw_pcie *pci, u32 region, u32 reg)
>  {
> -	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
> -
> -	return dw_pcie_readl_atu(pci, offset + reg);
> +	return dw_pcie_readl_atu(pci, PCIE_ATU_REGION_DIR_OB, region, reg);
>  }
>  
> -static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
> -				     u32 val)
> +static inline void dw_pcie_writel_atu_ob(struct dw_pcie *pci, u32 region, u32 reg,
> +					 u32 val)
>  {
> -	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
> -
> -	dw_pcie_writel_atu(pci, offset + reg, val);
> +	dw_pcie_writel_atu(pci, PCIE_ATU_REGION_DIR_OB, region, reg, val);
>  }
>  
>  static inline u32 dw_pcie_enable_ecrc(u32 val)
> @@ -290,50 +309,6 @@ static inline u32 dw_pcie_enable_ecrc(u32 val)
>  	return val | PCIE_ATU_TD;
>  }
>  
> -static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
> -					     int index, int type,
> -					     u64 cpu_addr, u64 pci_addr,
> -					     u64 size)
> -{
> -	u32 retries, val;
> -	u64 limit_addr = cpu_addr + size - 1;
> -
> -	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
> -				 lower_32_bits(cpu_addr));
> -	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
> -				 upper_32_bits(cpu_addr));
> -	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_LIMIT,
> -				 lower_32_bits(limit_addr));
> -	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_LIMIT,
> -				 upper_32_bits(limit_addr));
> -	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
> -				 lower_32_bits(pci_addr));
> -	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
> -				 upper_32_bits(pci_addr));
> -	val = type | PCIE_ATU_FUNC_NUM(func_no);
> -	if (upper_32_bits(limit_addr) > upper_32_bits(cpu_addr))
> -		val |= PCIE_ATU_INCREASE_REGION_SIZE;
> -	if (dw_pcie_ver_is(pci, 490A))
> -		val = dw_pcie_enable_ecrc(val);
> -	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, val);
> -	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
> -				 PCIE_ATU_ENABLE);
> -
> -	/*
> -	 * Make sure ATU enable takes effect before any subsequent config
> -	 * and I/O accesses.
> -	 */
> -	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
> -		val = dw_pcie_readl_ob_unroll(pci, index,
> -					      PCIE_ATU_UNR_REGION_CTRL2);
> -		if (val & PCIE_ATU_ENABLE)
> -			return;
> -
> -		mdelay(LINK_WAIT_IATU);
> -	}
> -	dev_err(pci->dev, "Outbound iATU is not being enabled\n");
> -}
> -
>  static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no,
>  					int index, int type, u64 cpu_addr,
>  					u64 pci_addr, u64 size)
> @@ -344,49 +319,46 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no,
>  	if (pci->ops && pci->ops->cpu_addr_fixup)
>  		cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);
>  
> -	if (pci->iatu_unroll_enabled) {
> -		dw_pcie_prog_outbound_atu_unroll(pci, func_no, index, type,
> -						 cpu_addr, pci_addr, size);
> -		return;
> -	}
> -
>  	limit_addr = cpu_addr + size - 1;
>  
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
> -			   PCIE_ATU_REGION_OUTBOUND | index);
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
> -			   lower_32_bits(cpu_addr));
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
> -			   upper_32_bits(cpu_addr));
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
> -			   lower_32_bits(limit_addr));
> +	dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_LOWER_BASE,
> +			      lower_32_bits(cpu_addr));
> +	dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_UPPER_BASE,
> +			      upper_32_bits(cpu_addr));
> +
> +	dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_LIMIT,
> +			      lower_32_bits(limit_addr));
>  	if (dw_pcie_ver_is_ge(pci, 460A))
> -		dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_LIMIT,
> -				   upper_32_bits(limit_addr));
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
> -			   lower_32_bits(pci_addr));
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
> -			   upper_32_bits(pci_addr));
> +		dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_UPPER_LIMIT,
> +				      upper_32_bits(limit_addr));
> +
> +	dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_LOWER_TARGET,
> +			      lower_32_bits(pci_addr));
> +	dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_UPPER_TARGET,
> +			      upper_32_bits(pci_addr));
> +
>  	val = type | PCIE_ATU_FUNC_NUM(func_no);
>  	if (upper_32_bits(limit_addr) > upper_32_bits(cpu_addr) &&
>  	    dw_pcie_ver_is_ge(pci, 460A))
>  		val |= PCIE_ATU_INCREASE_REGION_SIZE;
>  	if (dw_pcie_ver_is(pci, 490A))
>  		val = dw_pcie_enable_ecrc(val);
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val);
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
> +	dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL1, val);
> +
> +	dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL2, PCIE_ATU_ENABLE);
>  
>  	/*
>  	 * Make sure ATU enable takes effect before any subsequent config
>  	 * and I/O accesses.
>  	 */
>  	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
> -		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
> +		val = dw_pcie_readl_atu_ob(pci, index, PCIE_ATU_REGION_CTRL2);
>  		if (val & PCIE_ATU_ENABLE)
>  			return;
>  
>  		mdelay(LINK_WAIT_IATU);
>  	}
> +
>  	dev_err(pci->dev, "Outbound iATU is not being enabled\n");
>  }
>  
> @@ -405,54 +377,15 @@ void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index,
>  				    cpu_addr, pci_addr, size);
>  }
>  
> -static u32 dw_pcie_readl_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg)
> -{
> -	u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
> -
> -	return dw_pcie_readl_atu(pci, offset + reg);
> -}
> -
> -static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg,
> -				     u32 val)
> +static inline u32 dw_pcie_readl_atu_ib(struct dw_pcie *pci, u32 region, u32 reg)
>  {
> -	u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
> -
> -	dw_pcie_writel_atu(pci, offset + reg, val);
> +	return dw_pcie_readl_atu(pci, PCIE_ATU_REGION_DIR_IB, region, reg);
>  }
>  
> -static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
> -					   int index, int type,
> -					   u64 cpu_addr, u8 bar)
> +static inline void dw_pcie_writel_atu_ib(struct dw_pcie *pci, u32 region, u32 reg,
> +					 u32 val)
>  {
> -	u32 retries, val;
> -
> -	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
> -				 lower_32_bits(cpu_addr));
> -	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
> -				 upper_32_bits(cpu_addr));
> -
> -	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, type |
> -				 PCIE_ATU_FUNC_NUM(func_no));
> -	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
> -				 PCIE_ATU_FUNC_NUM_MATCH_EN |
> -				 PCIE_ATU_ENABLE |
> -				 PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> -
> -	/*
> -	 * Make sure ATU enable takes effect before any subsequent config
> -	 * and I/O accesses.
> -	 */
> -	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
> -		val = dw_pcie_readl_ib_unroll(pci, index,
> -					      PCIE_ATU_UNR_REGION_CTRL2);
> -		if (val & PCIE_ATU_ENABLE)
> -			return 0;
> -
> -		mdelay(LINK_WAIT_IATU);
> -	}
> -	dev_err(pci->dev, "Inbound iATU is not being enabled\n");
> -
> -	return -EBUSY;
> +	dw_pcie_writel_atu(pci, PCIE_ATU_REGION_DIR_IB, region, reg, val);
>  }
>  
>  int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> @@ -460,65 +393,51 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
>  {
>  	u32 retries, val;
>  
> -	if (pci->iatu_unroll_enabled)
> -		return dw_pcie_prog_inbound_atu_unroll(pci, func_no, index, type,
> -						       cpu_addr, bar);
> -
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_INBOUND |
> -			   index);
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, lower_32_bits(cpu_addr));
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, upper_32_bits(cpu_addr));
> +	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_LOWER_TARGET,
> +			      lower_32_bits(cpu_addr));
> +	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_UPPER_TARGET,
> +			      upper_32_bits(cpu_addr));
>  
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> -			   PCIE_ATU_FUNC_NUM(func_no));
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE |
> -			   PCIE_ATU_FUNC_NUM_MATCH_EN |
> -			   PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> +	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_REGION_CTRL1, type |
> +			      PCIE_ATU_FUNC_NUM(func_no));
> +	dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_REGION_CTRL2,
> +			      PCIE_ATU_ENABLE | PCIE_ATU_FUNC_NUM_MATCH_EN |
> +			      PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
>  
>  	/*
>  	 * Make sure ATU enable takes effect before any subsequent config
>  	 * and I/O accesses.
>  	 */
>  	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
> -		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
> +		val = dw_pcie_readl_atu_ib(pci, index, PCIE_ATU_REGION_CTRL2);
>  		if (val & PCIE_ATU_ENABLE)
>  			return 0;
>  
>  		mdelay(LINK_WAIT_IATU);
>  	}
> +
>  	dev_err(pci->dev, "Inbound iATU is not being enabled\n");
>  
> -	return -EBUSY;
> +	return -ETIMEDOUT;
>  }
>  
>  void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
>  			 enum dw_pcie_region_type type)
>  {
> -	int region;
> +	u32 dir;
>  
>  	switch (type) {
>  	case DW_PCIE_REGION_INBOUND:
> -		region = PCIE_ATU_REGION_INBOUND;
> +		dir = PCIE_ATU_REGION_DIR_IB;

Is this the same double definition with the enum?

>  		break;
>  	case DW_PCIE_REGION_OUTBOUND:
> -		region = PCIE_ATU_REGION_OUTBOUND;
> +		dir = PCIE_ATU_REGION_DIR_OB;
>  		break;
>  	default:
>  		return;
>  	}
>  
> -	if (pci->iatu_unroll_enabled) {
> -		if (region == PCIE_ATU_REGION_INBOUND) {
> -			dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
> -						 ~(u32)PCIE_ATU_ENABLE);
> -		} else {
> -			dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
> -						 ~(u32)PCIE_ATU_ENABLE);
> -		}
> -	} else {
> -		dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, region | index);
> -		dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, ~(u32)PCIE_ATU_ENABLE);
> -	}
> +	dw_pcie_writel_atu(pci, dir, index, PCIE_ATU_REGION_CTRL2, 0);
>  }
>  
>  int dw_pcie_wait_for_link(struct dw_pcie *pci)
> @@ -622,63 +541,29 @@ static bool dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
>  	return false;
>  }
>  
> -static void dw_pcie_iatu_detect_regions_unroll(struct dw_pcie *pci)
> -{
> -	int max_region, i, ob = 0, ib = 0;
> -	u32 val;
> -
> -	max_region = min((int)pci->atu_size / 512, 256);
> -
> -	for (i = 0; i < max_region; i++) {
> -		dw_pcie_writel_ob_unroll(pci, i, PCIE_ATU_UNR_LOWER_TARGET,
> -					0x11110000);
> -
> -		val = dw_pcie_readl_ob_unroll(pci, i, PCIE_ATU_UNR_LOWER_TARGET);
> -		if (val == 0x11110000)
> -			ob++;
> -		else
> -			break;
> -	}
> -
> -	for (i = 0; i < max_region; i++) {
> -		dw_pcie_writel_ib_unroll(pci, i, PCIE_ATU_UNR_LOWER_TARGET,
> -					0x11110000);
> -
> -		val = dw_pcie_readl_ib_unroll(pci, i, PCIE_ATU_UNR_LOWER_TARGET);
> -		if (val == 0x11110000)
> -			ib++;
> -		else
> -			break;
> -	}
> -	pci->num_ib_windows = ib;
> -	pci->num_ob_windows = ob;
> -}
> -
>  static void dw_pcie_iatu_detect_regions(struct dw_pcie *pci)
>  {
> -	int max_region, i, ob = 0, ib = 0;
> +	int max_region, ob, ib;
>  	u32 val;
>  
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, 0xFF);
> -	max_region = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT) + 1;
> +	if (pci->iatu_unroll_enabled) {
> +		max_region = min((int)pci->atu_size / 512, 256);
> +	} else {
> +		dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, 0xFF);
> +		max_region = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT) + 1;
> +	}
>  
> -	for (i = 0; i < max_region; i++) {
> -		dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_OUTBOUND | i);
> -		dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, 0x11110000);
> -		val = dw_pcie_readl_dbi(pci, PCIE_ATU_LOWER_TARGET);
> -		if (val == 0x11110000)
> -			ob++;
> -		else
> +	for (ob = 0; ob < max_region; ob++) {
> +		dw_pcie_writel_atu_ob(pci, ob, PCIE_ATU_LOWER_TARGET, 0x11110000);
> +		val = dw_pcie_readl_atu_ob(pci, ob, PCIE_ATU_LOWER_TARGET);
> +		if (val != 0x11110000)
>  			break;
>  	}
>  
> -	for (i = 0; i < max_region; i++) {
> -		dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_INBOUND | i);
> -		dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, 0x11110000);
> -		val = dw_pcie_readl_dbi(pci, PCIE_ATU_LOWER_TARGET);
> -		if (val == 0x11110000)
> -			ib++;
> -		else
> +	for (ib = 0; ib < max_region; ib++) {
> +		dw_pcie_writel_atu_ib(pci, ib, PCIE_ATU_LOWER_TARGET, 0x11110000);
> +		val = dw_pcie_readl_atu_ib(pci, ib, PCIE_ATU_LOWER_TARGET);
> +		if (val != 0x11110000)
>  			break;
>  	}
>  
> @@ -707,12 +592,10 @@ void dw_pcie_iatu_detect(struct dw_pcie *pci)
>  		if (!pci->atu_size)
>  			/* Pick a minimal default, enough for 8 in and 8 out windows */
>  			pci->atu_size = SZ_4K;
> -
> -		dw_pcie_iatu_detect_regions_unroll(pci);
> -	} else {
> -		dw_pcie_iatu_detect_regions(pci);
>  	}
>  
> +	dw_pcie_iatu_detect_regions(pci);
> +
>  	dev_info(pci->dev, "iATU unroll: %s\n", pci->iatu_unroll_enabled ?
>  		"enabled" : "disabled");
>  
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 449c5ad92edc..6adf0c957c3b 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -103,10 +103,20 @@
>  #define PCIE_VERSION_NUMBER		0x8F8
>  #define PCIE_VERSION_TYPE		0x8FC
>  
> +/*
> + * iATU inbound and outbound windows CSRs. Before the IP-core v4.80a each
> + * iATU region CSRs had been indirectly accessible by means of the dedicated
> + * viewport selector. The iATU/eDMA CSRs space was re-designed in DWC PCIe
> + * v4.80a in a way so the viewport was unrolled into the directly accessible
> + * iATU/eDMA CSRs space.

IIRC, I think it is configurable in later versions. There was some 
discussion when I did the detection.

> + */
>  #define PCIE_ATU_VIEWPORT		0x900
> -#define PCIE_ATU_REGION_INBOUND		BIT(31)
> -#define PCIE_ATU_REGION_OUTBOUND	0
> -#define PCIE_ATU_CR1			0x904
> +#define PCIE_ATU_REGION_DIR_IB		BIT(31)
> +#define PCIE_ATU_REGION_DIR_OB		0
> +#define PCIE_ATU_VIEWPORT_BASE		0x904
> +#define PCIE_ATU_UNROLL_BASE(dir, region) \
> +	(((region) << 9) | ((dir == PCIE_ATU_REGION_DIR_IB) ? BIT(8) : 0))
> +#define PCIE_ATU_REGION_CTRL1		0x000
>  #define PCIE_ATU_INCREASE_REGION_SIZE	BIT(13)
>  #define PCIE_ATU_TYPE_MEM		0x0
>  #define PCIE_ATU_TYPE_IO		0x2
> @@ -114,19 +124,19 @@
>  #define PCIE_ATU_TYPE_CFG1		0x5
>  #define PCIE_ATU_TD			BIT(8)
>  #define PCIE_ATU_FUNC_NUM(pf)           ((pf) << 20)
> -#define PCIE_ATU_CR2			0x908
> +#define PCIE_ATU_REGION_CTRL2		0x004
>  #define PCIE_ATU_ENABLE			BIT(31)
>  #define PCIE_ATU_BAR_MODE_ENABLE	BIT(30)
>  #define PCIE_ATU_FUNC_NUM_MATCH_EN      BIT(19)
> -#define PCIE_ATU_LOWER_BASE		0x90C
> -#define PCIE_ATU_UPPER_BASE		0x910
> -#define PCIE_ATU_LIMIT			0x914
> -#define PCIE_ATU_LOWER_TARGET		0x918
> +#define PCIE_ATU_LOWER_BASE		0x008
> +#define PCIE_ATU_UPPER_BASE		0x00C
> +#define PCIE_ATU_LIMIT			0x010
> +#define PCIE_ATU_LOWER_TARGET		0x014
>  #define PCIE_ATU_BUS(x)			FIELD_PREP(GENMASK(31, 24), x)
>  #define PCIE_ATU_DEV(x)			FIELD_PREP(GENMASK(23, 19), x)
>  #define PCIE_ATU_FUNC(x)		FIELD_PREP(GENMASK(18, 16), x)
> -#define PCIE_ATU_UPPER_TARGET		0x91C
> -#define PCIE_ATU_UPPER_LIMIT		0x924
> +#define PCIE_ATU_UPPER_TARGET		0x018
> +#define PCIE_ATU_UPPER_LIMIT		0x020
>  
>  #define PCIE_MISC_CONTROL_1_OFF		0x8BC
>  #define PCIE_DBI_RO_WR_EN		BIT(0)
> @@ -143,19 +153,6 @@
>  
>  #define PCIE_PL_CHK_REG_ERR_ADDR			0xB28
>  
> -/*
> - * iATU Unroll-specific register definitions
> - * From 4.80 core version the address translation will be made by unroll
> - */
> -#define PCIE_ATU_UNR_REGION_CTRL1	0x00
> -#define PCIE_ATU_UNR_REGION_CTRL2	0x04
> -#define PCIE_ATU_UNR_LOWER_BASE		0x08
> -#define PCIE_ATU_UNR_UPPER_BASE		0x0C
> -#define PCIE_ATU_UNR_LOWER_LIMIT	0x10
> -#define PCIE_ATU_UNR_LOWER_TARGET	0x14
> -#define PCIE_ATU_UNR_UPPER_TARGET	0x18
> -#define PCIE_ATU_UNR_UPPER_LIMIT	0x20
> -
>  /*
>   * The default address offset between dbi_base and atu_base. Root controller
>   * drivers are not required to initialize atu_base if the offset matches this
> @@ -164,13 +161,6 @@
>   */
>  #define DEFAULT_DBI_ATU_OFFSET (0x3 << 20)
>  
> -/* Register address builder */
> -#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) \
> -		((region) << 9)
> -
> -#define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region) \
> -		(((region) << 9) | BIT(8))
> -
>  #define MAX_MSI_IRQS			256
>  #define MAX_MSI_IRQS_PER_CTRL		32
>  #define MAX_MSI_CTRLS			(MAX_MSI_IRQS / MAX_MSI_IRQS_PER_CTRL)
> -- 
> 2.35.1
>