Re: [PATCH net-next 03/12] dt-bindings: net: pcs: add bindings for Renesas RZ/N1 MII converter

[Rob Herring <robh@kernel.org>]

On Thu, Apr 14, 2022 at 02:22:41PM +0200, Clément Léger wrote:
> This MII converter can be found on the RZ/N1 processor family. The MII
> converter ports are declared as subnodes which are then referenced by
> users of the PCS driver such as the switch.
> 
> Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> ---
>  .../bindings/net/pcs/renesas,rzn1-miic.yaml   | 95 +++++++++++++++++++
>  include/dt-bindings/net/pcs-rzn1-miic.h       | 19 ++++
>  2 files changed, 114 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
>  create mode 100644 include/dt-bindings/net/pcs-rzn1-miic.h
> 
> diff --git a/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
> new file mode 100644
> index 000000000000..ccb25ce6cbde
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
> @@ -0,0 +1,95 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/pcs/renesas,rzn1-miic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/N1 MII converter
> +
> +maintainers:
> +  - Clément Léger <clement.leger@bootlin.com>
> +
> +description: |
> +  This MII converter is present on the Renesas RZ/N1 SoC family. It is
> +  responsible to do MII passthrough or convert it to RMII/RGMII.
> +
> +properties:
> +  compatible:
> +      const: renesas,rzn1-miic

Need SoC specific compatibles.

> +
> +  reg:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  clocks:
> +    items:
> +      - description: MII reference clock
> +      - description: RGMII reference clock
> +      - description: RMII reference clock
> +      - description: AHB clock used for the MII converter register interface
> +
> +  renesas,miic-cfg-mode:
> +    description: MII mux configuration mode. This value should use one of the
> +                 value defined in dt-bindings/net/pcs-rzn1-miic.h.

Describe possible values here as constraints. At present, I don't see 
the point of this property if there is only 1 possible value and it is 
required.

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +  
> +patternProperties:
> +  "^mii-conv@[0-4]$":
> +    type: object

       additionalProperties: false

> +    description: MII converter port
> +
> +    properties:
> +      reg:
> +        maxItems: 1

Why do you need sub-nodes? They don't have any properties. A simple mask 
property could tell you which ports are present/active/enabled if that's 
what you are tracking. Or the SoC specific compatibles you need to add 
can imply the ports if they are SoC specific.

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - renesas,miic-cfg-mode
> +  - "#address-cells"
> +  - "#size-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/net/pcs-rzn1-miic.h>
> +    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
> +
> +    eth-miic@44030000 {
> +      compatible = "renesas,rzn1-miic";
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      reg = <0x44030000 0x10000>;
> +      clocks = <&sysctrl R9A06G032_CLK_MII_REF>,
> +              <&sysctrl R9A06G032_CLK_RGMII_REF>,
> +              <&sysctrl R9A06G032_CLK_RMII_REF>,
> +              <&sysctrl R9A06G032_HCLK_SWITCH_RG>;
> +      renesas,miic-cfg-mode = <MIIC_MUX_MAC2_MAC1_SWD_SWC_SWB_SWA>;
> +
> +      mii_conv0: mii-conv@0 {
> +        reg = <0>;
> +      };
> +
> +      mii_conv1: mii-conv@1 {
> +        reg = <1>;
> +      };
> +
> +      mii_conv2: mii-conv@2 {
> +        reg = <2>;
> +      };
> +
> +      mii_conv3: mii-conv@3 {
> +        reg = <3>;
> +      };
> +
> +      mii_conv4: mii-conv@4 {
> +        reg = <4>;
> +      };
> +    };
> \ No newline at end of file

Fix this.

> diff --git a/include/dt-bindings/net/pcs-rzn1-miic.h b/include/dt-bindings/net/pcs-rzn1-miic.h
> new file mode 100644
> index 000000000000..c5a0f382967b
> --- /dev/null
> +++ b/include/dt-bindings/net/pcs-rzn1-miic.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: GPL-2.0 */

Dual license please.

> +/*
> + * Copyright (C) 2022 Schneider-Electric
> + *
> + * Clément Léger <clement.leger@bootlin.com>
> + */
> +
> +#ifndef _DT_BINDINGS_PCS_RZN1_MIIC
> +#define _DT_BINDINGS_PCS_RZN1_MIIC
> +
> +/*
> + * Reefer to the datasheet [1] section 8.2.1, Internal Connection of Ethernet
> + * Ports to check the meaning of these values.
> + *
> + * [1] REN_r01uh0750ej0140-rzn1-introduction_MAT_20210228.pdf
> + */
> +#define MIIC_MUX_MAC2_MAC1_SWD_SWC_SWB_SWA	0x13
> +
> +#endif
> -- 
> 2.34.1
> 
>