linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Drew Fustini <dfustini@baylibre.com>
To: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Dave Gerlach <d-gerlach@ti.com>, Tony Lindgren <tony@atomide.com>,
	Nishanth Menon <nm@ti.com>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] dt-bindings: wkup-m3-ipc: Add vtt toggle gpio pin property
Date: Tue, 12 Apr 2022 14:15:24 -0700	[thread overview]
Message-ID: <YlXr7M/HXvlXWftR@x1> (raw)
In-Reply-To: <YlXY88aJIrcHc5Bc@robh.at.kernel.org>

On Tue, Apr 12, 2022 at 02:54:27PM -0500, Rob Herring wrote:
> On Sat, Apr 09, 2022 at 02:12:14PM -0700, Drew Fustini wrote:
> > Document Wakeup M3 IPC property that indicates a GPIO pin is connected
> > to the enable pin on DDR VTT regulator and can be toggled during low
> > power mode transitions.
> > 
> > Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
> > [dfustini: converted to YAML, removed unnecessary "ti,needs-vtt-toggle"]
> > Signed-off-by: Drew Fustini <dfustini@baylibre.com>
> > ---
> >  .../devicetree/bindings/soc/ti/wkup-m3-ipc.yaml     | 13 +++++++++++++
> >  1 file changed, 13 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml
> > index d855c01ce61c..7f4a75c5fcaa 100644
> > --- a/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml
> > +++ b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml
> > @@ -24,6 +24,14 @@ description: |+
> >    A wkup_m3_ipc device node is used to represent the IPC registers within an
> >    SoC.
> >  
> > +  Support for VTT Toggle
> > +  ==================================
> > +  On some boards like the AM335x EVM-SK and the AM437x GP EVM, a GPIO pin is
> > +  connected to the enable pin on the DDR VTT regulator. This allows the
> > +  regulator to be disabled upon suspend and enabled upon resume. Please note
> > +  that the GPIO pin must be part of the GPIO0 module as only this GPIO module
> > +  is in the wakeup power domain.
> > +
> >  properties:
> >    compatible:
> >      enum:
> > @@ -51,6 +59,10 @@ properties:
> >        mbox_wkupm3 child node.
> >      maxItems: 1
> >  
> > +  ti,vtt-gpio-pin:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description: GPIO pin connected to enable pin on VTT regulator
> 
> Looking at the driver, can't you add 'maximum: 31' here? If so, I can 
> add it when applying.

Yes, good idea. I would appreciate it if that was added when applying.

Thank you,
Drew

  reply	other threads:[~2022-04-12 22:30 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-09 21:12 [PATCH v2 0/2] soc: ti: wkup_m3_ipc: support vtt toggle Drew Fustini
2022-04-09 21:12 ` [PATCH v2 1/2] dt-bindings: wkup-m3-ipc: Add vtt toggle gpio pin property Drew Fustini
2022-04-10 14:17   ` Krzysztof Kozlowski
2022-04-12 19:54   ` Rob Herring
2022-04-12 21:15     ` Drew Fustini [this message]
2022-04-13 21:48   ` Rob Herring
2022-04-09 21:12 ` [PATCH v2 2/2] soc: ti: wkup_m3_ipc: Add support for toggling VTT regulator Drew Fustini
2022-04-22 23:14 ` (subset) [PATCH v2 0/2] soc: ti: wkup_m3_ipc: support vtt toggle Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YlXr7M/HXvlXWftR@x1 \
    --to=dfustini@baylibre.com \
    --cc=d-gerlach@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).