linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Cc: Forest Bond <forest@alittletooquiet.net>,
	linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 3/3] staging: vt6655: Replace VNSvInPortD with ioread32
Date: Fri, 29 Apr 2022 17:25:26 +0200	[thread overview]
Message-ID: <YmwDZi3mmWRHzKAT@kroah.com> (raw)
In-Reply-To: <b3d6b773-4ca1-a72e-933b-455c5d2b91c9@gmail.com>

On Fri, Apr 29, 2022 at 05:18:28PM +0200, Philipp Hortmann wrote:
> On 4/27/22 07:55, Greg Kroah-Hartman wrote:
> > > MACvRegBitsOn(iobase, MAC_REG_TFTCTL, TFTCTL_TSFCNTRRD);
> > >   	for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
> > > @@ -753,8 +754,9 @@ bool CARDbGetCurrentTSF(struct vnt_private *priv, u64 *pqwCurrTSF)
> > >   	}
> > >   	if (ww == W_MAX_TIMEOUT)
> > >   		return false;
> > > -	VNSvInPortD(iobase + MAC_REG_TSFCNTR, (u32 *)pqwCurrTSF);
> > > -	VNSvInPortD(iobase + MAC_REG_TSFCNTR + 4, (u32 *)pqwCurrTSF + 1);
> > > +	low = ioread32(iobase + MAC_REG_TSFCNTR);
> > > +	high = ioread32(iobase + MAC_REG_TSFCNTR + 4);
> > > +	*pqwCurrTSF = low + ((u64)high << 32);
> > Are you_sure_  this is doing the same thing?
> > 
> 
> To compare I used the following code:
> VNSvInPortD(iobase + MAC_REG_TSFCNTR, (u32 *)pqwCurrTSF);
> VNSvInPortD(iobase + MAC_REG_TSFCNTR + 4, (u32 *)pqwCurrTSF + 1);
> dev_info(&priv->pcid->dev, "CARDbGetCurrentTSF *pqwCurrTSF: %llx",
> *pqwCurrTSF);
> low = ioread32(iobase + MAC_REG_TSFCNTR);
> high = ioread32(iobase + MAC_REG_TSFCNTR + 4);
> dev_info(&priv->pcid->dev, "CARDbGetCurrentTSF low/high: %llx", low +
> ((u64)high << 32));
> 
> Output:
> vt6655 0000:01:05.0: CARDbGetCurrentTSF *pqwCurrTSF: 1155ba
> vt6655 0000:01:05.0: CARDbGetCurrentTSF low/high:    1155ba
> vt6655 0000:01:05.0: CARDbGetCurrentTSF *pqwCurrTSF: 35d7cbd7c
> vt6655 0000:01:05.0: CARDbGetCurrentTSF low/high:    35d7cbd7c
> vt6655 0000:01:05.0: CARDbGetCurrentTSF *pqwCurrTSF: 35d7cbd8a
> vt6655 0000:01:05.0: CARDbGetCurrentTSF low/high:    35d7cbd8a
> 
> So no different results for numbers larger than 32 Bit.

And for a big endian system?  Do you get the same result?

> The pqwCurrTSF is a microsecond counter running in the WLAN Router:
> At a later Measurement I got the following values:
> 269 seconds later: 0x3 6d89 fd91 -> 269.30 seconds
> 15 minutes later: 0x3 6d89 fd91 -> 15.54 minutes
> 8:38 hours later: 0xa 9787 ad91 -> 8.62 hours
> 
> So both methods work on a AMD64 processor.
> 
> > Adding 1 to a u64 pointer increments it by a full u64.  So I guess the
> > cast to u32 * moves it only by a u32?  Hopefully?  That's messy.
> 
> That is the reason why I wanted to change this.
> 
> > Why not keep the current mess and do:
> > 	pqwCurrTSF = ioread32(iobase + MAC_REG_TSFCNTR);
> > 	((u32 *)pqwCurTSF + 1) = ioread32(iobase + MAC_REG_TSFCNTR + 4);
> > Or does that not compile?
> 
> drivers/staging/vt6655/card.c:760:13: warning: assignment to ‘u64 *’ {aka
> ‘long long unsigned int *’} from ‘unsigned int’ makes pointer from integer
> without a cast [-Wint-conversion]
>   760 |  pqwCurrTSF = ioread32(iobase + MAC_REG_TSFCNTR);
>       |             ^
> drivers/staging/vt6655/card.c:761:26: error: lvalue required as left operand
> of assignment
>   761 |  ((u32 *)pqwCurrTSF + 1) = ioread32(iobase + MAC_REG_TSFCNTR + 4);
>       |                          ^
> 
> This compiles:
> 	*(u32 *)pqwCurrTSF = ioread32(iobase + MAC_REG_TSFCNTR);
> 	*((u32 *)pqwCurrTSF + 1) = ioread32(iobase + MAC_REG_TSFCNTR + 4);

Heh, I just guessed :)

> Log:
> vt6655 0000:01:05.0: CARDbGetCurrentTSF *pqwCurrTSF: 178f41d90
> vt6655 0000:01:05.0: CARDbGetCurrentTSF with ioread: 178f41d90
> 
> Ick, how about:
> > 	u32 *temp = (u32 *)pqwCurTSF;
> > 
> > 	temp = ioread32(iobase + MAC_REG_TSFCNTR);
> > 	temp++;
> > 	temp = ioread32(iobase + MAC_REG_TSFCNTR + 4);
> 
> This is working:
> 	u32 *temp = (u32 *)pqwCurrTSF;
> 
> 	*temp = ioread32(iobase + MAC_REG_TSFCNTR);
> 	temp++;
> 	*temp = ioread32(iobase + MAC_REG_TSFCNTR + 4);

Nice!

thanks for testing,

greg k-h

  reply	other threads:[~2022-04-29 15:25 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-27  5:42 [PATCH v3 0/3] staging: vt6655: Replace macro VNSvInPortD with ioread32() Philipp Hortmann
2022-04-27  5:42 ` [PATCH v3 1/3] staging: vt6655: Replace MACvReadMIBCounter with VNSvInPortD Philipp Hortmann
2022-04-27  5:42 ` [PATCH v3 2/3] staging: vt6655: Replace MACvReadISR " Philipp Hortmann
2022-04-27  5:42 ` [PATCH v3 3/3] staging: vt6655: Replace VNSvInPortD with ioread32 Philipp Hortmann
2022-04-27  5:55   ` Greg Kroah-Hartman
2022-04-27  8:01     ` David Laight
2022-04-27  8:48       ` 'Greg Kroah-Hartman'
2022-04-27 19:10       ` Philipp Hortmann
2022-04-27 21:59         ` David Laight
2022-04-29 15:18     ` Philipp Hortmann
2022-04-29 15:25       ` Greg Kroah-Hartman [this message]
2022-04-29 15:32         ` Philipp Hortmann
2022-04-29 15:45           ` Greg Kroah-Hartman
2022-04-29 21:04         ` Philipp Hortmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YmwDZi3mmWRHzKAT@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=forest@alittletooquiet.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=philipp.g.hortmann@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).