* [PATCH v2] dt-bindings: gnss: Add Broacom BCM4751 family bindings
@ 2022-04-25 13:22 Linus Walleij
2022-05-02 23:02 ` Rob Herring
0 siblings, 1 reply; 2+ messages in thread
From: Linus Walleij @ 2022-04-25 13:22 UTC (permalink / raw)
To: Johan Hovold, Rob Herring
Cc: linux-kernel, Linus Walleij, devicetree, phone-devel
The Broadcom BCM4751 family of (A-)GPS chips have been around for
some years. The latest iteration BCM4753 is for example mounted
on the Huawei HiKey970.
Cc: devicetree@vger.kernel.org
Cc: phone-devel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Switch do dual GPL/BSD license.
---
.../bindings/gnss/brcm,bcm4751.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
diff --git a/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
new file mode 100644
index 000000000000..e62b30386ac2
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/brcm,bcm4751.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4751 family GNSS Receiver Device Tree Bindings
+
+maintainers:
+ - Johan Hovold <johan@kernel.org>
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+ Broadcom GPS chips can be used over the UART or I2C bus. The UART
+ bus requires CTS/RTS support. The number of the capsule is more
+ elaborate than the compatibles BCM4751 may be printed
+ BCM4751IFBG for example.
+
+allOf:
+ - $ref: gnss-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm4751
+ - brcm,bcm4752
+ - brcm,bcm4753
+
+ reg:
+ description:
+ The I2C Address, not required on UART buses.
+
+ vdd-auxin-supply:
+ description:
+ Main voltage supply, pin name VDD_AUXIN, typically connected
+ directly to a battery such as LiIon 3.8V battery or a 2.6V supply.
+
+ vddio-supply:
+ description:
+ IO voltage supply, pin name VDDIO, typically 1.8V
+
+ reset-gpios:
+ maxItems: 1
+ description: An optional active low reset line, should be flagged with
+ GPIO_ACTIVE_LOW.
+
+ enable-gpios:
+ description: Enable GPIO line, connected to pins named REGPU or NSTANDBY.
+ If the line is active low such as NSTANDBY, it should be tagged
+ GPIO_ACTIVE_LOW.
+
+required:
+ - compatible
+ - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial {
+ gnss {
+ compatible = "brcm,bcm4751";
+ vdd-auxin-supply = <&vbat>;
+ reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ current-speed = <38400>;
+ };
+ };
--
2.35.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] dt-bindings: gnss: Add Broacom BCM4751 family bindings
2022-04-25 13:22 [PATCH v2] dt-bindings: gnss: Add Broacom BCM4751 family bindings Linus Walleij
@ 2022-05-02 23:02 ` Rob Herring
0 siblings, 0 replies; 2+ messages in thread
From: Rob Herring @ 2022-05-02 23:02 UTC (permalink / raw)
To: Linus Walleij
Cc: devicetree, phone-devel, Rob Herring, Johan Hovold, linux-kernel
On Mon, 25 Apr 2022 15:22:15 +0200, Linus Walleij wrote:
> The Broadcom BCM4751 family of (A-)GPS chips have been around for
> some years. The latest iteration BCM4753 is for example mounted
> on the Huawei HiKey970.
>
> Cc: devicetree@vger.kernel.org
> Cc: phone-devel@vger.kernel.org
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v1->v2:
> - Switch do dual GPL/BSD license.
> ---
> .../bindings/gnss/brcm,bcm4751.yaml | 69 +++++++++++++++++++
> 1 file changed, 69 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
>
Applied, thanks!
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-05-02 23:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-25 13:22 [PATCH v2] dt-bindings: gnss: Add Broacom BCM4751 family bindings Linus Walleij
2022-05-02 23:02 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).