From: "Russell King (Oracle)" <linux@armlinux.org.uk>
To: Wan Jiabing <wanjiabing@vivo.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Antoine Tenart <atenart@kernel.org>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 net] net: phy: mscc: Add error check when __phy_read() failed
Date: Wed, 11 May 2022 11:45:24 +0100 [thread overview]
Message-ID: <YnuTxAw06UHCY1mf@shell.armlinux.org.uk> (raw)
In-Reply-To: <20220510142247.16071-1-wanjiabing@vivo.com>
On Tue, May 10, 2022 at 10:22:45PM +0800, Wan Jiabing wrote:
> Calling __phy_read() might return a negative error code. Use 'int'
> to declare variables which call __phy_read() and also add error check
> for them.
>
> The numerous callers of vsc8584_macsec_phy_read() don't expect it to
> fail. So don't return the error code from __phy_read(), but also don't
> return random values if it does fail.
>
> Fixes: fa164e40c53b ("net: phy: mscc: split the driver into separate files")
> Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
> ---
> Changelog:
> v2:
> - Sort variable declaration and add a detailed comment.
> ---
> drivers/net/phy/mscc/mscc_macsec.c | 11 ++++++++---
> 1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/phy/mscc/mscc_macsec.c b/drivers/net/phy/mscc/mscc_macsec.c
> index b7b2521c73fb..58ad11a697b6 100644
> --- a/drivers/net/phy/mscc/mscc_macsec.c
> +++ b/drivers/net/phy/mscc/mscc_macsec.c
> @@ -22,9 +22,9 @@
> static u32 vsc8584_macsec_phy_read(struct phy_device *phydev,
> enum macsec_bank bank, u32 reg)
> {
> - u32 val, val_l = 0, val_h = 0;
> + int rc, val, val_l, val_h;
> unsigned long deadline;
> - int rc;
> + u32 ret = 0;
>
> rc = phy_select_page(phydev, MSCC_PHY_PAGE_MACSEC);
> if (rc < 0)
> @@ -47,15 +47,20 @@ static u32 vsc8584_macsec_phy_read(struct phy_device *phydev,
> deadline = jiffies + msecs_to_jiffies(PROC_CMD_NCOMPLETED_TIMEOUT_MS);
> do {
> val = __phy_read(phydev, MSCC_EXT_PAGE_MACSEC_19);
> + if (val < 0)
> + goto failed;
> } while (time_before(jiffies, deadline) && !(val & MSCC_PHY_MACSEC_19_CMD));
>
> val_l = __phy_read(phydev, MSCC_EXT_PAGE_MACSEC_17);
> val_h = __phy_read(phydev, MSCC_EXT_PAGE_MACSEC_18);
>
> + if (val_l > 0 && val_h > 0)
> + ret = (val_h << 16) | val_l;
> +
> failed:
> phy_restore_page(phydev, rc, rc);
>
> - return (val_h << 16) | val_l;
> + return ret;
> }
This is still wrong - phy_restore_page() can fail to retore the page.
It's rather unfortunate that you need to return a u32, where the
high values become negative ints, which means you can't use
phy_restore_page() as it's supposed to be used.
If you fail to read from the PHY, is returning zero acceptable?
I think what you should be doing at the very least is:
rc = phy_select_page(phydev, MSCC_PHY_PAGE_MACSEC);
if (rc < 0)
goto failed;
rc = __phy_write(phydev, MSCC_EXT_PAGE_MACSEC_20, ...);
if (rc < 0)
goto failed;
...
rc = __phy_write(phydev, MSCC_EXT_PAGE_MACSEC_19, ...);
if (rc < 0)
goto failed;
...
do {
val = __phy_read(phydev, MSCC_EXT_PAGE_MACSEC_19);
if (val < 0) {
rc = val;
goto failed;
}
} while (...);
val_l = __phy_read(phydev, MSCC_EXT_PAGE_MACSEC_17);
if (val_l < 0) {
rc = val_l;
goto failed;
}
val_h = __phy_read(phydev, MSCC_EXT_PAGE_MACSEC_18);
if (val_h < 0)
rc = val_h;
failed:
rc = phy_restore_page(phgydev, rc, 0);
return rc < 0 ? 0 : val_h << 16 | val_l;
Which means that if any of the PHY IO functions fail at any point, this
returns zero.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
prev parent reply other threads:[~2022-05-11 10:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-10 14:22 [PATCH v2 net] net: phy: mscc: Add error check when __phy_read() failed Wan Jiabing
2022-05-10 14:48 ` Antoine Tenart
2022-05-10 15:08 ` Andrew Lunn
2022-05-10 15:33 ` Antoine Tenart
2022-05-11 3:23 ` Jiabing Wan
2022-05-11 10:45 ` Russell King (Oracle) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YnuTxAw06UHCY1mf@shell.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=andrew@lunn.ch \
--cc=atenart@kernel.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=wanjiabing@vivo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).