From: Greg KH <gregkh@linuxfoundation.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [GIT PULL] USB / Thunderbolt driver changes for 6.0-rc1
Date: Wed, 3 Aug 2022 16:10:26 +0200 [thread overview]
Message-ID: <YuqB0tl2hjT3x7a4@kroah.com> (raw)
The following changes since commit ff6992735ade75aae3e35d16b17da1008d753d28:
Linux 5.19-rc7 (2022-07-17 13:30:22 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git tags/usb-6.0-rc1
for you to fetch changes up to 8288c99fc263bcafc5df5fa8c278b2eb8106364e:
usb: misc: onboard_usb_hub: Remove duplicated power_on delay (2022-07-28 09:21:15 +0200)
----------------------------------------------------------------
USB / Thunderbolt changes for 6.0-rc1
Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development on
some new hardware support and cleanups of older drivers. Highlights of
this pull request are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this
tool it seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted
as they depened on some typec changes, but the cross-tree
merges caused problems so they will come back later through
the platform tree.
All of these have been in linux-next for a while now with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Alan Stern (1):
USB: gadget: Fix use-after-free Read in usb_udc_uevent()
Alexander Stein (5):
usb: chipidea: ci_hdrc_imx: use dev_err_probe()
dt-bindings: usb: Add binding for TI USB8041 hub controller
usb: misc: onboard_usb_hub: Add reset-gpio support
usb: misc: onboard_usb_hub: Add TI USB8041 hub support
usb: misc: onboard_usb_hub: Remove duplicated power_on delay
Alexey Sheplyakov (1):
usb: xhci_plat_remove: avoid NULL dereference
Amelie Delaunay (4):
usb: host: ohci-platform: add TPL support
usb: host: ehci-platform: add TPL support
usb: dwc2: host: add TPL support
usb: dwc2: gadget: remove D+ pull-up while no vbus with usb-role-switch
Andrey Strachuk (1):
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
Artur Bujdoso (1):
staging: octeon-usb: move driver out of staging
Bryan O'Donoghue (3):
tools: usb: testusb: Add wireless speed reporting
tools: usb: testusb: Add super speed reporting
tools: usb: testusb: Add super-plus speed reporting
Chen Xingdi (1):
usb: renesas-xhci: Do not print any log while fw verif success
Chunfeng Yun (12):
dt-bindings: usb: mtk-xhci: add support 'resets' property
dt-bindings: usb: mtu3: add support 'resets' property
usb: xhci-mtk: add support optional controller reset
usb: mtu3: add support controller reset
usb: mtu3: sync interrupt before unbind the udc
usb: mtu3: implement udc_async_callbacks of gadget operation
usb: mtu3: register mtu3_irq by threaded irq
dt-bindings: usb: mtk-xhci: add compatible for mt8188
usb: mtu3: print endpoint type as string
usb: mtu3: add feature to disable device's usb3 port
usb: mtu3: check capability of usb3 dual role
usb: mtu3: support function remote wakeup
Clément Léger (1):
usb: host: ohci-at91: add support to enter suspend using SMC
Colin Ian King (2):
usb: gadget: ast2600: Fix a couple of spelling mistakes
usb: phy: remove redundant store to variable var after & operation
Conor Dooley (2):
usb: musb: Add support for PolarFire SoC's musb controller
MAINTAINERS: add musb to PolarFire SoC entry
Dan Carpenter (8):
USB: usbip: clean up mixed use of _irq() and _irqsave()
usbip: vudc: Don't enable IRQs prematurely
usb: gadget: aspeed_udc: cleanup loop in ast_dma_descriptor_setup()
usb: musb: mpfs: Fix error codes in probe()
usb: gadget: aspeed_udc: fix handling of tx_len == 0
usb: typec: anx7411: Fix an array out of bounds
usb: typec: anx7411: fix error checking in anx7411_get_gpio_irq()
usb: typec: anx7411: use semi-colons instead of commas
Fabrice Gasnier (8):
dt-bindings: usb: dwc2: document TPL support
dt-bindings: usb: typec: add bindings for stm32g0 controller
usb: typec: ucsi: stm32g0: add support for stm32g0 controller
usb: typec: ucsi: stm32g0: add bootloader support
dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
ARM: multi_v7_defconfig: enable USB onboard HUB driver
Frank Li (2):
usb: cdns3 fix use-after-free at workaround 2
usb: cdns3: fix random warning message when driver load
George D Sworo (1):
thunderbolt: Add support for Intel Raptor Lake
Gil Fine (6):
thunderbolt: Silently ignore CLx enabling in case CLx is not supported
thunderbolt: CLx disable before system suspend only if previously enabled
thunderbolt: Fix typos in CLx enabling
thunderbolt: Change downstream router's TMU rate in both TMU uni/bidir mode
thunderbolt: Add CL1 support for USB4 and Titan Ridge routers
thunderbolt: Change TMU mode to HiFi uni-directional once DisplayPort tunneled
Greg Kroah-Hartman (15):
Revert "ARM: dts: aspeed: Add USB2.0 device controller node"
Merge v5.19-rc3 into usb-next
Merge branch 'staging-octeon' of gitolite.kernel.org:/pub/scm/linux/kernel/git/gregkh/staging into usb-next
Merge 5.19-rc4 into usb-next
Merge tag 'thunderbolt-for-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Merge 5.19-rc7 into usb-next
Revert "platform/chrome: cros_ec_typec: Get retimer handle"
Revert "platform/chrome: cros_ec_typec: Cleanup switch handle return paths"
Revert "platform/chrome: cros_typec_switch: Register mode switches"
Revert "platform/chrome: cros_typec_switch: Add event check"
Revert "platform/chrome: cros_typec_switch: Set EC retimer"
Revert "platform/chrome: cros_typec_switch: Add ACPI Kconfig dep"
Revert "platform/chrome: cros_typec_switch: Add switch driver"
Revert "platform/chrome: Add Type-C mux set command definitions"
Merge tag 'usb-serial-5.20-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Heikki Krogerus (3):
usb: typec: Separate USB Power Delivery from USB Type-C
usb: typec: USB Power Delivery helpers for ports and partners
usb: typec: tcpm: Register USB Power Delivery Capabilities
Herve Codina (1):
dt-bindings: usb: atmel: Add Microchip LAN9662 compatible string
Hyunwoo Kim (1):
usb: host: ehci-q: Fix ehci_submit_single_step_set_feature annotation typo
Jason Wang (1):
USB: xhci: Fix comment typo
Jiang Jian (3):
usb: dwc2: drop unexpected word "the" in the comments
usb: max-3421: drop unexpected word "the" in the comments
USB: serial: fix repeated word "the" in comments
Jiangshan Yi (1):
usb: ldusb: replace ternary operator with max_t()
Jiapeng Chong (1):
usb: gadget: Remove unnecessary print function dev_err()
Jilin Yuan (8):
usb/atm: fix repeated words in comments
usb/core: fix repeated words in comments
usb/host: fix repeated words in comments
usb/image: fix repeated words in comments
usb/misc: fix repeated words in comments
usb/musb: fix repeated words in comments
usb/typec/tcpm: fix repeated words in comments
usb/chipidea: fix repeated words in comments
Johan Hovold (10):
dt-bindings: usb: qcom,dwc3: add SC8280XP binding
dt-bindings: usb: qcom,dwc3: refine interrupt requirements
usb: dwc3: qcom: fix missing optional irq warnings
USB: cdc: add control-signal defines
USB: cdc: add serial-state defines
USB: cdc-acm: use CDC control-line defines
USB: cdc-acm: use CDC serial-state defines
staging: gdm724x: drop unused CDC defines
USB: gadget: f_acm: use CDC defines
USB: serial: fix tty-port initialized comments
Jozef Martiniak (1):
gadgetfs: ep_io - wait until IRQ finishes
Julia Lawall (3):
usb: typec: tcpm: fix typo in comment
usb: gadget: bdc: fix typo in comment
USB: chipidea: fix typo in comment
Kushagra Verma (4):
usb: dwc3: Remove the checks of -ENOSYS
usb: dwc3: Fix bare use of unsigned checkpatch warning
usb: dwc3: Fix a repeated word checkpatch warning
usb: dwc3: Fix typos in Kconfig
Laurent Pinchart (1):
usb: gadget: uvc: Fix comment blocks style
Li Jun (1):
usb: dwc3: add power down scale setting
Liang He (3):
usb: host: ohci-ppc-of: Fix refcount leak bug
usb: renesas: Fix refcount leak bug
usb: aspeed-vhub: Fix refcount leak bug in ast_vhub_init_desc()
Linyu Yuan (1):
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
Lukas Bulwahn (1):
MAINTAINERS: Repair file entry in ASPEED USB UDC DRIVER
Mathias Nyman (1):
usb: Avoid extra usb SET_SEL requests when enabling link power management
Matthias Kaehlcke (5):
of/platform: Add stubs for of_platform_device_create/destroy()
dt-bindings: usb: rts5411: Rename property 'companion-hub' to 'peer-hub'
usb: misc: Add onboard_usb_hub driver
usb: core: hub: Create platform devices for onboard hubs in hub_probe()
usb: misc: onboard_hub: Fix 'missing prototype' warning
Mauro Carvalho Chehab (3):
usb: typec_altmode: add a missing "@" at a kernel-doc parameter
usb: dwc3: document async_callbacks field
usb: dwc3: gadget: fix a kernel-doc warning
Maxim Devaev (2):
usb: gadget: f_mass_storage: forced_eject attribute
USB: docs: fixed table margin in configfs-usb-gadget-mass-storage
Miaoqian Lin (2):
usb: host: Fix refcount leak in ehci_hcd_ppc_of_probe
usb: ohci-nxp: Fix refcount leak in ohci_hcd_nxp_probe
Michael Grzeschik (6):
usb: gadget: uvc: calculate the number of request depending on framesize
usb: gadget: uvc: call uvc uvcg_warn on completed status instead of uvcg_info
usb: hub: port: add sysfs entry to switch port power
usb: chipidea: udc: implement get_frame
usb: dwc3: gadget: refactor dwc3_repare_one_trb
usb: dwc3: gadget: fix high speed multiplier setting
Michael Walle (2):
usb: gadget: udc: atmel: check rc of devm_gpiod_get_optional()
usb: gadget: udc: atmel: convert to platform driver
Neal Liu (4):
usb: gadget: add Aspeed ast2600 udc driver
ARM: dts: aspeed: Add USB2.0 device controller node
dt-bindings: usb: add documentation for aspeed udc
usb: gadget: f_mass_storage: Make CD-ROM emulation works with Windows OS
Nícolas F. R. A. Prado (4):
dt-bindings: usb: mtk-xhci: Allow wakeup interrupt-names to be optional
dt-bindings: usb: mtk-xhci: Make all clocks required
Revert "dt-bindings: usb: mtk-xhci: Make all clocks required"
usb: typec: retimer: Add missing id check in match callback
Oliver Neukum (1):
USB: cdc-acm: use define for timeout
Prashant Malani (12):
usb: typec: mux: Allow muxes to specify mode-switch
usb: typec: mux: Add CONFIG guards for functions
usb: typec: Add support for retimers
usb: typec: Add retimer handle to port
platform/chrome: Add Type-C mux set command definitions
platform/chrome: cros_typec_switch: Add switch driver
platform/chrome: cros_typec_switch: Set EC retimer
platform/chrome: cros_typec_switch: Add event check
platform/chrome: cros_typec_switch: Register mode switches
platform/chrome: cros_ec_typec: Cleanup switch handle return paths
platform/chrome: cros_ec_typec: Get retimer handle
platform/chrome: cros_typec_switch: Add ACPI Kconfig dep
Prashanth K (1):
usb: common: usb-conn-gpio: Allow wakeup from system suspend
Randy Dunlap (1):
usb: gadget: udc: amd5536 depends on HAS_DMA
Rohith Kollalsi (1):
usb: dwc3: core: Do not perform GCTL_CORE_SOFTRESET during bootup
Sandeep Maheswaram (5):
dt-bindings: usb: dwc3: Add wakeup-source property support
usb: dwc3: core: Host wake up support from system suspend
usb: dwc3: qcom: Add helper functions to enable,disable wake irqs
usb: dwc3: qcom: Configure wakeup interrupts during suspend
usb: dwc3: qcom: Keep power domain on to retain controller status
Sanket Goswami (2):
ucsi_ccg: Do not hardcode interrupt polarity and type
ucsi_ccg: ACPI based I2c client enumeration for AMD ASICs
Saurav Girepunje (1):
usb: musb: remove schedule work called after flush
Sergey Shtylyov (2):
usb: musb: core: drop redundant checks
usb: host: xhci: use snprintf() in xhci_decode_trb()
Slark Xiao (1):
USB: serial: use kmemdup instead of kmalloc + memcpy
Steven Rostedt (Google) (1):
USB: gadget: udc: tracing: Do not open code __string() with __dynamic_array()
Tang Bin (2):
usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()
usb: xhci: tegra: Fix error check
Thinh Nguyen (2):
Revert "usb: dwc3: Remove the checks of -ENOSYS"
usb: dwc3: core: Deprecate GCTL.CORESOFTRESET
Weitao Wang (1):
USB: HCD: Fix URB giveback issue in tasklet function
Wesley Cheng (1):
usb: dwc3: ep0: Properly handle setup_packet_pending scenario in data stage
Xiang Wangx (1):
thunderbolt: Fix typo in comment
Xiang wangx (2):
USB: ohci-sm501: Fix typo in comment
USB: storage: Fix typo in comment
Xin Ji (4):
usb: typec: tcpci: move tcpci.h to include/linux/usb/
dt-bindings: usb: Add analogix anx7411 PD binding
usb: typec: anx7411: Add Analogix PD ANX7411 support
usb: typec: anx7411: fix passing zero to 'PTR_ERR'
Xuezhi Zhang (2):
usb: core: sysfs: convert sysfs snprintf to sysfs_emit
USB: usbsevseg: convert sysfs snprintf to sysfs_emit
Yan Xinyu (1):
USB: serial: usb_wwan: replace DTR/RTS magic numbers with macros
Yang Li (2):
thunderbolt: Fix some kernel-doc comments
usb: gadget: u_ether: Remove duplicated include in u_ether.c
Yang Yingliang (4):
usb: musb: mpfs: add missing clk_disable_unprepare() in mpfs_remove()
usb: typec: anx7411: Fix wrong pointer passed to PTR_ERR()
usb: typec: anx7411: Fix return value check in anx7411_register_i2c_dummy_clients()
usb: typec: anx7411: Fix error return code in anx7411_i2c_probe()
Zhang Jiaming (1):
USB: serial: io_edgeport: fix spelling mistakes
Zheng Bin (1):
usb: gadget: aspeed_udc: fix missing spin_unlock_irqrestore in ast_udc_ep_queue
.../ABI/testing/configfs-usb-gadget-mass-storage | 10 +-
.../ABI/testing/sysfs-bus-platform-onboard-usb-hub | 8 +
Documentation/ABI/testing/sysfs-bus-usb | 11 +
Documentation/ABI/testing/sysfs-class-typec | 8 +
.../ABI/testing/sysfs-class-usb_power_delivery | 240 +++
.../devicetree/bindings/usb/analogix,anx7411.yaml | 81 +
.../bindings/usb/aspeed,ast2600-udc.yaml | 52 +
.../devicetree/bindings/usb/atmel-usb.txt | 3 +
Documentation/devicetree/bindings/usb/dwc2.yaml | 3 +
.../devicetree/bindings/usb/generic-ehci.yaml | 7 +-
.../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 5 +
.../devicetree/bindings/usb/mediatek,mtu3.yaml | 3 +
.../devicetree/bindings/usb/qcom,dwc3.yaml | 152 +-
.../devicetree/bindings/usb/realtek,rts5411.yaml | 10 +-
.../devicetree/bindings/usb/snps,dwc3.yaml | 5 +
.../devicetree/bindings/usb/st,typec-stm32g0.yaml | 91 ++
.../devicetree/bindings/usb/ti,usb8041.yaml | 67 +
Documentation/usb/gadget-testing.rst | 6 +
Documentation/usb/mass-storage.rst | 9 +
MAINTAINERS | 15 +
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 8 +
arch/arm/configs/multi_v7_defconfig | 1 +
arch/mips/configs/cavium_octeon_defconfig | 2 +-
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/staging/gdm724x/gdm_tty.c | 6 -
drivers/staging/octeon-usb/Kconfig | 11 -
drivers/staging/octeon-usb/Makefile | 2 -
drivers/staging/octeon-usb/TODO | 8 -
drivers/thunderbolt/ctl.c | 6 +-
drivers/thunderbolt/ctl.h | 2 +-
drivers/thunderbolt/icm.c | 2 +
drivers/thunderbolt/nhi.c | 4 +
drivers/thunderbolt/nhi.h | 2 +
drivers/thunderbolt/switch.c | 91 +-
drivers/thunderbolt/tb.c | 68 +-
drivers/thunderbolt/tb.h | 48 +-
drivers/thunderbolt/tb_regs.h | 6 +
drivers/thunderbolt/tmu.c | 221 ++-
drivers/usb/atm/ueagle-atm.c | 2 +-
drivers/usb/cdns3/cdns3-gadget.c | 13 +-
drivers/usb/chipidea/ci.h | 1 +
drivers/usb/chipidea/ci_hdrc_imx.c | 23 +-
drivers/usb/chipidea/ci_hdrc_imx.h | 2 +-
drivers/usb/chipidea/core.c | 2 +
drivers/usb/chipidea/otg_fsm.c | 2 +-
drivers/usb/chipidea/udc.c | 14 +
drivers/usb/class/cdc-acm.c | 44 +-
drivers/usb/class/cdc-acm.h | 20 -
drivers/usb/common/usb-conn-gpio.c | 17 +
drivers/usb/core/Makefile | 4 +
drivers/usb/core/driver.c | 2 +-
drivers/usb/core/hcd.c | 34 +-
drivers/usb/core/hub.c | 108 +-
drivers/usb/core/hub.h | 4 +
drivers/usb/core/port.c | 83 +
drivers/usb/core/sysfs.c | 79 +-
drivers/usb/core/usb.c | 2 +-
drivers/usb/dwc2/gadget.c | 3 +-
drivers/usb/dwc2/hcd.c | 5 +-
drivers/usb/dwc3/Kconfig | 4 +-
drivers/usb/dwc3/core.c | 56 +-
drivers/usb/dwc3/core.h | 3 +
drivers/usb/dwc3/dwc3-qcom.c | 144 +-
drivers/usb/dwc3/ep0.c | 9 +-
drivers/usb/dwc3/gadget.c | 93 +-
drivers/usb/gadget/function/f_acm.c | 20 +-
drivers/usb/gadget/function/f_mass_storage.c | 36 +-
drivers/usb/gadget/function/f_uvc.c | 30 +-
drivers/usb/gadget/function/storage_common.c | 15 +
drivers/usb/gadget/function/storage_common.h | 2 +
drivers/usb/gadget/function/u_ether.c | 1 -
drivers/usb/gadget/function/uvc_queue.c | 23 +-
drivers/usb/gadget/function/uvc_video.c | 14 +-
drivers/usb/gadget/legacy/inode.c | 1 +
drivers/usb/gadget/udc/Kconfig | 15 +-
drivers/usb/gadget/udc/Makefile | 1 +
drivers/usb/gadget/udc/aspeed-vhub/hub.c | 4 +-
drivers/usb/gadget/udc/aspeed_udc.c | 1597 +++++++++++++++++++
drivers/usb/gadget/udc/atmel_usba_udc.c | 10 +-
drivers/usb/gadget/udc/bdc/bdc_cmd.c | 2 +-
drivers/usb/gadget/udc/core.c | 11 +-
drivers/usb/gadget/udc/tegra-xudc.c | 8 +-
drivers/usb/gadget/udc/trace.h | 8 +-
drivers/usb/host/Kconfig | 10 +
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-platform.c | 2 +
drivers/usb/host/ehci-ppc-of.c | 1 +
drivers/usb/host/ehci-q.c | 2 +-
drivers/usb/host/max3421-hcd.c | 2 +-
.../{staging/octeon-usb => usb/host}/octeon-hcd.c | 0
.../{staging/octeon-usb => usb/host}/octeon-hcd.h | 0
drivers/usb/host/ohci-at91.c | 69 +-
drivers/usb/host/ohci-nxp.c | 1 +
drivers/usb/host/ohci-platform.c | 3 +
drivers/usb/host/ohci-ppc-of.c | 1 +
drivers/usb/host/ohci-sm501.c | 2 +-
drivers/usb/host/uhci-grlib.c | 2 +-
drivers/usb/host/uhci-hcd.h | 2 +-
drivers/usb/host/xhci-mtk.c | 7 +
drivers/usb/host/xhci-pci-renesas.c | 4 -
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/host/xhci-tegra.c | 8 +-
drivers/usb/host/xhci.h | 2 +-
drivers/usb/image/mdc800.c | 2 +-
drivers/usb/misc/Kconfig | 16 +
drivers/usb/misc/Makefile | 1 +
drivers/usb/misc/ldusb.c | 6 +-
drivers/usb/misc/onboard_usb_hub.c | 458 ++++++
drivers/usb/misc/onboard_usb_hub.h | 36 +
drivers/usb/misc/onboard_usb_hub_pdevs.c | 143 ++
drivers/usb/misc/usbsevseg.c | 2 +-
drivers/usb/misc/usbtest.c | 2 +-
drivers/usb/mtu3/mtu3.h | 5 +-
drivers/usb/mtu3/mtu3_core.c | 35 +-
drivers/usb/mtu3/mtu3_debugfs.c | 8 +-
drivers/usb/mtu3/mtu3_gadget.c | 38 +-
drivers/usb/mtu3/mtu3_gadget_ep0.c | 10 +-
drivers/usb/mtu3/mtu3_hw_regs.h | 16 +
drivers/usb/mtu3/mtu3_plat.c | 43 +-
drivers/usb/mtu3/mtu3_trace.h | 4 +-
drivers/usb/musb/Kconfig | 13 +-
drivers/usb/musb/Makefile | 1 +
drivers/usb/musb/mpfs.c | 269 ++++
drivers/usb/musb/musb_core.c | 16 +-
drivers/usb/musb/musb_cppi41.c | 2 +-
drivers/usb/musb/musb_gadget.c | 2 -
drivers/usb/musb/tusb6010.c | 2 +-
drivers/usb/phy/phy-keystone.c | 2 +-
drivers/usb/renesas_usbhs/rza.c | 4 +
drivers/usb/serial/cypress_m8.c | 2 +-
drivers/usb/serial/garmin_gps.c | 4 +-
drivers/usb/serial/io_edgeport.c | 4 +-
drivers/usb/serial/mos7720.c | 2 +-
drivers/usb/serial/opticon.c | 4 +-
drivers/usb/serial/sierra.c | 7 +-
drivers/usb/serial/usb-serial.c | 2 +-
drivers/usb/serial/usb_wwan.c | 13 +-
drivers/usb/storage/transport.c | 2 +-
drivers/usb/typec/Kconfig | 11 +
drivers/usb/typec/Makefile | 3 +-
drivers/usb/typec/anx7411.c | 1601 ++++++++++++++++++++
drivers/usb/typec/class.c | 167 +-
drivers/usb/typec/class.h | 6 +
drivers/usb/typec/mux.c | 8 +-
drivers/usb/typec/pd.c | 708 +++++++++
drivers/usb/typec/pd.h | 30 +
drivers/usb/typec/retimer.c | 173 +++
drivers/usb/typec/retimer.h | 15 +
drivers/usb/typec/tcpm/tcpci.c | 3 +-
drivers/usb/typec/tcpm/tcpci_maxim.c | 3 +-
drivers/usb/typec/tcpm/tcpci_mt6360.c | 3 +-
drivers/usb/typec/tcpm/tcpci_rt1711h.c | 2 +-
drivers/usb/typec/tcpm/tcpm.c | 146 +-
drivers/usb/typec/ucsi/Kconfig | 10 +
drivers/usb/typec/ucsi/Makefile | 1 +
drivers/usb/typec/ucsi/ucsi.c | 4 +
drivers/usb/typec/ucsi/ucsi_ccg.c | 28 +-
drivers/usb/typec/ucsi/ucsi_stm32g0.c | 777 ++++++++++
drivers/usb/usbip/vudc_rx.c | 6 +-
drivers/usb/usbip/vudc_sysfs.c | 14 +-
include/linux/of_platform.h | 22 +-
include/linux/usb.h | 2 +
include/linux/usb/hcd.h | 1 +
include/linux/usb/onboard_hub.h | 18 +
include/linux/usb/pd.h | 38 +
.../usb/typec/tcpm => include/linux/usb}/tcpci.h | 1 +
include/linux/usb/typec.h | 23 +
include/linux/usb/typec_altmode.h | 2 +-
include/linux/usb/typec_mux.h | 44 +-
include/linux/usb/typec_retimer.h | 45 +
include/uapi/linux/usb/cdc.h | 13 +
tools/usb/testusb.c | 18 +-
173 files changed, 8399 insertions(+), 692 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub
create mode 100644 Documentation/ABI/testing/sysfs-class-usb_power_delivery
create mode 100644 Documentation/devicetree/bindings/usb/analogix,anx7411.yaml
create mode 100644 Documentation/devicetree/bindings/usb/aspeed,ast2600-udc.yaml
create mode 100644 Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
create mode 100644 Documentation/devicetree/bindings/usb/ti,usb8041.yaml
delete mode 100644 drivers/staging/octeon-usb/Kconfig
delete mode 100644 drivers/staging/octeon-usb/Makefile
delete mode 100644 drivers/staging/octeon-usb/TODO
create mode 100644 drivers/usb/gadget/udc/aspeed_udc.c
rename drivers/{staging/octeon-usb => usb/host}/octeon-hcd.c (100%)
rename drivers/{staging/octeon-usb => usb/host}/octeon-hcd.h (100%)
create mode 100644 drivers/usb/misc/onboard_usb_hub.c
create mode 100644 drivers/usb/misc/onboard_usb_hub.h
create mode 100644 drivers/usb/misc/onboard_usb_hub_pdevs.c
create mode 100644 drivers/usb/musb/mpfs.c
create mode 100644 drivers/usb/typec/anx7411.c
create mode 100644 drivers/usb/typec/pd.c
create mode 100644 drivers/usb/typec/pd.h
create mode 100644 drivers/usb/typec/retimer.c
create mode 100644 drivers/usb/typec/retimer.h
create mode 100644 drivers/usb/typec/ucsi/ucsi_stm32g0.c
create mode 100644 include/linux/usb/onboard_hub.h
rename {drivers/usb/typec/tcpm => include/linux/usb}/tcpci.h (99%)
create mode 100644 include/linux/usb/typec_retimer.h
next reply other threads:[~2022-08-03 14:10 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-03 14:10 Greg KH [this message]
2022-08-03 15:43 ` [GIT PULL] USB / Thunderbolt driver changes for 6.0-rc1 Nathan Chancellor
2022-08-03 15:50 ` Greg KH
2022-08-03 15:56 ` Krishna Kurapati PSSNV
2022-08-08 13:07 ` Greg KH
2022-08-03 15:58 ` Nathan Chancellor
2022-08-04 18:45 ` Linus Torvalds
2022-08-04 18:50 ` Nathan Chancellor
2022-08-04 19:26 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YuqB0tl2hjT3x7a4@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).