linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
	Claudiu Beznea <claudiu.beznea@microchip.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] pcmcia: at91_cf: switch to using gpiod API
Date: Fri, 23 Sep 2022 23:04:29 -0700	[thread overview]
Message-ID: <Yy6d7TjqzUwGQnQa@penguin> (raw)

This patch switches the driver to use newer gpiod API instead of legacy
gpio API. This moves us closer to the goal of stopping exporting
OF-specific APIs of gpiolib.

While at it, stop using module-global for regmap.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/pcmcia/at91_cf.c | 116 ++++++++++++++++++++-------------------
 1 file changed, 60 insertions(+), 56 deletions(-)

diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 92df2c2c5d07..4ae790d00fd6 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2005 David Brownell
  */
 
+#include <linux/err.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
@@ -12,14 +13,13 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/io.h>
 #include <linux/sizes.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/atmel-mc.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/pci.h>
 #include <linux/regmap.h>
 
@@ -36,18 +36,17 @@
 #define	CF_MEM_PHYS	(0x017ff800)
 
 struct at91_cf_data {
-	int	irq_pin;		/* I/O IRQ */
-	int	det_pin;		/* Card detect */
-	int	vcc_pin;		/* power switching */
-	int	rst_pin;		/* card reset */
+	struct gpio_desc *irq_pin;	/* I/O IRQ */
+	struct gpio_desc *det_pin;	/* Card detect */
+	struct gpio_desc *vcc_pin;	/* power switching */
+	struct gpio_desc *rst_pin;	/* card reset */
+	struct regmap *mc;
 	u8	chipselect;		/* EBI Chip Select number */
 	u8	flags;
 #define AT91_CF_TRUE_IDE	0x01
 #define AT91_IDE_SWAP_A0_A2	0x02
 };
 
-struct regmap *mc;
-
 /*--------------------------------------------------------------------------*/
 
 struct at91_cf_socket {
@@ -63,7 +62,7 @@ struct at91_cf_socket {
 
 static inline int at91_cf_present(struct at91_cf_socket *cf)
 {
-	return !gpio_get_value(cf->board->det_pin);
+	return gpiod_get_value(cf->board->det_pin);
 }
 
 /*--------------------------------------------------------------------------*/
@@ -77,7 +76,7 @@ static irqreturn_t at91_cf_irq(int irq, void *_cf)
 {
 	struct at91_cf_socket *cf = _cf;
 
-	if (irq == gpio_to_irq(cf->board->det_pin)) {
+	if (irq == gpiod_to_irq(cf->board->det_pin)) {
 		unsigned present = at91_cf_present(cf);
 
 		/* kick pccard as needed */
@@ -103,16 +102,15 @@ static int at91_cf_get_status(struct pcmcia_socket *s, u_int *sp)
 
 	/* NOTE: CF is always 3VCARD */
 	if (at91_cf_present(cf)) {
-		int rdy	= gpio_is_valid(cf->board->irq_pin);	/* RDY/nIRQ */
-		int vcc	= gpio_is_valid(cf->board->vcc_pin);
-
 		*sp = SS_DETECT | SS_3VCARD;
-		if (!rdy || gpio_get_value(cf->board->irq_pin))
+		/* RDY/nIRQ */
+		if (!cf->board->irq_pin || gpiod_get_value(cf->board->irq_pin))
 			*sp |= SS_READY;
-		if (!vcc || gpio_get_value(cf->board->vcc_pin))
+		if (!cf->board->vcc_pin || gpiod_get_value(cf->board->vcc_pin))
 			*sp |= SS_POWERON;
-	} else
+	} else {
 		*sp = 0;
+	}
 
 	return 0;
 }
@@ -125,13 +123,13 @@ at91_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
 	cf = container_of(sock, struct at91_cf_socket, socket);
 
 	/* switch Vcc if needed and possible */
-	if (gpio_is_valid(cf->board->vcc_pin)) {
+	if (cf->board->vcc_pin) {
 		switch (s->Vcc) {
 		case 0:
-			gpio_set_value(cf->board->vcc_pin, 0);
+			gpiod_set_value(cf->board->vcc_pin, 0);
 			break;
 		case 33:
-			gpio_set_value(cf->board->vcc_pin, 1);
+			gpiod_set_value(cf->board->vcc_pin, 1);
 			break;
 		default:
 			return -EINVAL;
@@ -139,7 +137,7 @@ at91_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
 	}
 
 	/* toggle reset if needed */
-	gpio_set_value(cf->board->rst_pin, s->flags & SS_RESET);
+	gpiod_set_value(cf->board->rst_pin, s->flags & SS_RESET);
 
 	dev_dbg(&cf->pdev->dev, "Vcc %d, io_irq %d, flags %04x csc %04x\n",
 				s->Vcc, s->io_irq, s->flags, s->csc_mask);
@@ -180,7 +178,8 @@ static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io)
 		csr = AT91_MC_SMC_DBW_16;
 		dev_dbg(&cf->pdev->dev, "16bit i/o bus\n");
 	}
-	regmap_update_bits(mc, AT91_MC_SMC_CSR(cf->board->chipselect),
+	regmap_update_bits(cf->board->mc,
+			   AT91_MC_SMC_CSR(cf->board->chipselect),
 			   AT91_MC_SMC_DBW, csr);
 
 	io->start = cf->socket.io_offset;
@@ -238,17 +237,9 @@ static int at91_cf_probe(struct platform_device *pdev)
 	if (!board)
 		return -ENOMEM;
 
-	board->irq_pin = of_get_gpio(pdev->dev.of_node, 0);
-	board->det_pin = of_get_gpio(pdev->dev.of_node, 1);
-	board->vcc_pin = of_get_gpio(pdev->dev.of_node, 2);
-	board->rst_pin = of_get_gpio(pdev->dev.of_node, 3);
-
-	mc = syscon_regmap_lookup_by_compatible("atmel,at91rm9200-sdramc");
-	if (IS_ERR(mc))
-		return PTR_ERR(mc);
-
-	if (!gpio_is_valid(board->det_pin) || !gpio_is_valid(board->rst_pin))
-		return -ENODEV;
+	board->mc = syscon_regmap_lookup_by_compatible("atmel,at91rm9200-sdramc");
+	if (IS_ERR(board->mc))
+		return PTR_ERR(board->mc);
 
 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!io)
@@ -264,26 +255,34 @@ static int at91_cf_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, cf);
 
 	/* must be a GPIO; ergo must trigger on both edges */
-	status = devm_gpio_request(&pdev->dev, board->det_pin, "cf_det");
-	if (status < 0)
+	board->det_pin = devm_gpiod_get_index(&pdev->dev, NULL, 1, GPIOD_IN);
+	status = PTR_ERR_OR_ZERO(board->det_pin);
+	if (status)
 		return status;
 
-	status = devm_request_irq(&pdev->dev, gpio_to_irq(board->det_pin),
+	gpiod_set_consumer_name(board->det_pin, "cf_det");
+
+	status = devm_request_irq(&pdev->dev, gpiod_to_irq(board->det_pin),
 					at91_cf_irq, 0, "at91_cf detect", cf);
 	if (status < 0)
 		return status;
 
 	device_init_wakeup(&pdev->dev, 1);
 
-	status = devm_gpio_request(&pdev->dev, board->rst_pin, "cf_rst");
-	if (status < 0)
+	board->rst_pin = devm_gpiod_get_index(&pdev->dev, NULL, 3, GPIOD_ASIS);
+	status = PTR_ERR_OR_ZERO(board->rst_pin);
+	if (status)
 		goto fail0a;
 
-	if (gpio_is_valid(board->vcc_pin)) {
-		status = devm_gpio_request(&pdev->dev, board->vcc_pin, "cf_vcc");
-		if (status < 0)
-			goto fail0a;
-	}
+	gpiod_set_consumer_name(board->rst_pin, "cf_rst");
+
+	board->vcc_pin = devm_gpiod_get_index_optional(&pdev->dev,
+						      NULL, 2, GPIOD_ASIS);
+	status = PTR_ERR_OR_ZERO(board->rst_pin);
+	if (status)
+		goto fail0a;
+
+	gpiod_set_consumer_name(board->vcc_pin, "cf_vcc");
 
 	/*
 	 * The card driver will request this irq later as needed.
@@ -291,18 +290,23 @@ static int at91_cf_probe(struct platform_device *pdev)
 	 * unless we report that we handle everything (sigh).
 	 * (Note:  DK board doesn't wire the IRQ pin...)
 	 */
-	if (gpio_is_valid(board->irq_pin)) {
-		status = devm_gpio_request(&pdev->dev, board->irq_pin, "cf_irq");
-		if (status < 0)
-			goto fail0a;
+	board->irq_pin = devm_gpiod_get_index_optional(&pdev->dev,
+						      NULL, 0, GPIOD_IN);
+	status = PTR_ERR_OR_ZERO(board->irq_pin);
+	if (status)
+		goto fail0a;
 
-		status = devm_request_irq(&pdev->dev, gpio_to_irq(board->irq_pin),
+	if (board->irq_pin) {
+		gpiod_set_consumer_name(board->irq_pin, "cf_irq");
+
+		status = devm_request_irq(&pdev->dev, gpiod_to_irq(board->irq_pin),
 					at91_cf_irq, IRQF_SHARED, "at91_cf", cf);
 		if (status < 0)
 			goto fail0a;
-		cf->socket.pci_irq = gpio_to_irq(board->irq_pin);
-	} else
+		cf->socket.pci_irq = gpiod_to_irq(board->irq_pin);
+	} else {
 		cf->socket.pci_irq = nr_irqs + 1;
+	}
 
 	/*
 	 * pcmcia layer only remaps "real" memory not iospace
@@ -322,7 +326,7 @@ static int at91_cf_probe(struct platform_device *pdev)
 	}
 
 	dev_info(&pdev->dev, "irqs det #%d, io #%d\n",
-		gpio_to_irq(board->det_pin), gpio_to_irq(board->irq_pin));
+		gpiod_to_irq(board->det_pin), gpiod_to_irq(board->irq_pin));
 
 	cf->socket.owner = THIS_MODULE;
 	cf->socket.dev.parent = &pdev->dev;
@@ -362,9 +366,9 @@ static int at91_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
 	struct at91_cf_data	*board = cf->board;
 
 	if (device_may_wakeup(&pdev->dev)) {
-		enable_irq_wake(gpio_to_irq(board->det_pin));
-		if (gpio_is_valid(board->irq_pin))
-			enable_irq_wake(gpio_to_irq(board->irq_pin));
+		enable_irq_wake(gpiod_to_irq(board->det_pin));
+		if (board->irq_pin)
+			enable_irq_wake(gpiod_to_irq(board->irq_pin));
 	}
 	return 0;
 }
@@ -375,9 +379,9 @@ static int at91_cf_resume(struct platform_device *pdev)
 	struct at91_cf_data	*board = cf->board;
 
 	if (device_may_wakeup(&pdev->dev)) {
-		disable_irq_wake(gpio_to_irq(board->det_pin));
-		if (gpio_is_valid(board->irq_pin))
-			disable_irq_wake(gpio_to_irq(board->irq_pin));
+		disable_irq_wake(gpiod_to_irq(board->det_pin));
+		if (board->irq_pin)
+			disable_irq_wake(gpiod_to_irq(board->irq_pin));
 	}
 
 	return 0;
-- 
2.30.2


-- 
Dmitry

             reply	other threads:[~2022-09-24  6:04 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-24  6:04 Dmitry Torokhov [this message]
2022-09-24  8:33 ` [PATCH] pcmcia: at91_cf: switch to using gpiod API Arnd Bergmann
2022-09-24 11:42   ` Alexandre Belloni
2022-09-24 14:17     ` Dominik Brodowski
2022-09-25  4:54       ` Dmitry Torokhov
2022-09-25 12:24       ` Linus Walleij
2022-09-26 15:26         ` Nicolas Ferre
2022-09-25 18:09       ` Alexandre Belloni
2022-09-25 19:06       ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Yy6d7TjqzUwGQnQa@penguin \
    --to=dmitry.torokhov@gmail.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=claudiu.beznea@microchip.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nicolas.ferre@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).