Re: [PATCH v2 2/4] media: dt-bindings: Document Renesas RZ/G2L CRU block

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: "Lad Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	"Mauro Carvalho Chehab" <mchehab@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Jacopo Mondi" <jacopo@jmondi.org>,
	"Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
	"Sakari Ailus" <sakari.ailus@linux.intel.com>,
	"Hans Verkuil" <hverkuil-cisco@xs4all.nl>,
	"Geert Uytterhoeven" <geert+renesas@glider.be>,
	linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	Prabhakar <prabhakar.csengg@gmail.com>,
	"Biju Das" <biju.das.jz@bp.renesas.com>
Subject: Re: [PATCH v2 2/4] media: dt-bindings: Document Renesas RZ/G2L CRU block
Date: Wed, 21 Sep 2022 20:29:34 +0300	[thread overview]
Message-ID: <YytJ/oJK9s2mfqPL@pendragon.ideasonboard.com> (raw)
In-Reply-To: <ba436dd5-2ea2-b2e0-7056-5bae6b4c7bb4@linaro.org>

On Wed, Sep 21, 2022 at 05:51:29PM +0200, Krzysztof Kozlowski wrote:
> On 21/09/2022 14:43, Laurent Pinchart wrote:
> > On Thu, Sep 08, 2022 at 01:40:39PM +0200, Krzysztof Kozlowski wrote:
> >> On 06/09/2022 01:04, Lad Prabhakar wrote:
> >>> Document the CRU block found on Renesas RZ/G2L (and alike) SoCs.
> >>>
> >>> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> >>> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> >>
> >> Thank you for your patch. There is something to discuss/improve.
> >>
> >>> +properties:
> >>> +  compatible:
> >>> +    items:
> >>> +      - enum:
> >>> +          - renesas,r9a07g044-cru       # RZ/G2{L,LC}
> >>> +          - renesas,r9a07g054-cru       # RZ/V2L
> >>> +      - const: renesas,rzg2l-cru
> >>> +
> >>> +  reg:
> >>> +    maxItems: 1
> >>> +
> >>> +  interrupts:
> >>> +    maxItems: 3
> >>> +
> >>> +  interrupt-names:
> >>> +    items:
> >>> +      - const: image_conv
> >>> +      - const: image_conv_err
> >>> +      - const: axi_mst_err
> >>> +
> >>> +  clocks:
> >>> +    items:
> >>> +      - description: CRU Main clock
> >>> +      - description: CPU Register access clock
> >>> +      - description: CRU image transfer clock
> >>> +
> >>> +  clock-names:
> >>> +    items:
> >>> +      - const: vclk
> >>> +      - const: pclk
> >>> +      - const: aclk
> >>
> >> Drop the "clk" suffixes. Remaining names could be made a bit more readable.
> > 
> > These names come from the documentation, isn't it better to match the
> > datasheet ?
> 
> If datasheet calls it "vclk_really_clk_it_is_clk_clk", it's not the
> reason to use it. :)
> 
> The "clk" is redundant even if the hardware engineer thought different.
> 
> The same for IRQs ("tx" not "txirq"), for dmas ("tx" not "txdma").

I'd argue that naming clocks "v", "p" and "a" would be less readable and
more confusing. Is this a new rule ?

-- 
Regards,

Laurent Pinchart