On Thu, Nov 30, 2023 at 10:19:40AM +0000, Tudor Ambarus wrote: > I'm trying my luck on a 3 year old patch, fingers crossed :). > > On 5/6/20 09:02, Hyunki Koo wrote: > > Hi, Hyunki! > > > Support 32-bit access for the TX/RX hold registers UTXH and URXH. > > > > This is required for some newer SoCs. > > Is the 32-bit access mandatory for the newer SoCs? I'm asking because I > see a SError Interrupt when using 8-bit accesses on gs101 (pixel6). Can > you confirm if gs101 USI UART is restricted to only 32 bit data width > accesses? > > If 32-bit accesses are mandatory, we should impose this restriction so > that we avoid crashing the kernel on wrong user configuration. I have > some patches ready, waiting just for a confirmation. Hi. Yes, some newer exynos SoCs allow only 32bit access to UART TX / RX register. This feature is related with SoC Bus architecture so it should be controlled by "reg-io-width" in UART device tree. Thanks. > > Below is the crash that I see. Thanks! > > [ 1.215459] SError Interrupt on CPU6, code 0x00000000be000411 -- SError > [ 1.215464] CPU: 6 PID: 1 Comm: swapper/0 Not tainted > 6.6.0-rc1-00021-g31831088e862-dirty #88 > [ 1.215468] Hardware name: Oriole DVT (DT) > [ 1.215470] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS > BTYPE=--) > [ 1.215473] pc : s3c24xx_serial_console_putchar+0x1c/0x90 > [ 1.215487] lr : uart_console_write+0x50/0x6c > [ 1.215491] sp : ffff80008007b6c0 > [ 1.215492] x29: ffff80008007b6c0 x28: 0000000000000000 x27: > ffffc0ec2c855900 > [ 1.215498] x26: ffffc0ec2bdee008 x25: 0000000000000000 x24: > ffffc0ec2c529a40 > [ 1.215501] x23: ffff80008007b830 x22: ffffc0ec2c9578b9 x21: > ffffc0ec2c9b8330 > [ 1.215504] x20: ffffc0ec2aa0d684 x19: ffffc0ec2c95788a x18: > 0000000000000006 > [ 1.215507] x17: 0000000000000000 x16: 0000000000000001 x15: > ffff80008007b460 > [ 1.215510] x14: 0000000000000000 x13: 64656c62616e6520 x12: > 5d30434153797474 > [ 1.215513] x11: 5b20656c6f736e6f x10: 63203a6b746e6972 x9 : > 656c62616e65205d > [ 1.215515] x8 : 304341537974745b x7 : 205d303534353132 x6 : > 322e31202020205b > [ 1.215518] x5 : ffffc0ec2c9b82f0 x4 : ffffc0ec2b5bc1c0 x3 : > ffff800080061000 > [ 1.215521] x2 : 0000000000000111 x1 : 0000000000000020 x0 : > ffffc0ec2c9b8330 > [ 1.215526] Kernel panic - not syncing: Asynchronous SError Interrupt > [ 1.215528] CPU: 6 PID: 1 Comm: swapper/0 Not tainted > 6.6.0-rc1-00021-g31831088e862-dirty #88 > [ 1.215531] Hardware name: Oriole DVT (DT) > [ 1.215532] Call trace: > [ 1.215533] dump_backtrace+0x90/0xe8 > [ 1.215542] show_stack+0x18/0x24 > [ 1.215547] dump_stack_lvl+0x48/0x60 > [ 1.215555] dump_stack+0x18/0x24 > [ 1.215559] panic+0x31c/0x378 > [ 1.215565] nmi_panic+0x8c/0x90 > [ 1.215569] arm64_serror_panic+0x6c/0x78 > [ 1.215571] do_serror+0x3c/0x70 > [ 1.215574] el1h_64_error_handler+0x30/0x48 > [ 1.215581] el1h_64_error+0x64/0x68 > [ 1.215583] s3c24xx_serial_console_putchar+0x1c/0x90 > [ 1.215588] s3c24xx_serial_console_write+0xb8/0xfc > [ 1.215593] console_flush_all.isra.0+0x168/0x3ac > [ 1.215600] console_unlock+0x58/0xdc > [ 1.215604] vprintk_emit+0x1a8/0x2b0 > [ 1.215608] vprintk_default+0x38/0x44 > [ 1.215613] vprintk+0xbc/0xd0 > [ 1.215617] _printk+0x5c/0x84 > [ 1.215621] register_console+0x2a0/0x400 > [ 1.215625] serial_core_register_port+0x61c/0x658 > [ 1.215630] serial_ctrl_register_port+0x10/0x1c > [ 1.215634] uart_add_one_port+0x10/0x1c > [ 1.215639] s3c24xx_serial_probe+0x360/0x6fc > [ 1.215644] platform_probe+0x68/0xc8 > [ 1.215650] really_probe+0x148/0x2b0 > [ 1.215653] __driver_probe_device+0x78/0x12c > [ 1.215656] driver_probe_device+0x3c/0x15c > [ 1.215658] __driver_attach+0x90/0x19c > [ 1.215661] bus_for_each_dev+0x78/0xd4 > [ 1.215668] driver_attach+0x24/0x30 > [ 1.215670] bus_add_driver+0xe8/0x1f8 > [ 1.215672] driver_register+0x5c/0x124 > [ 1.215675] __platform_driver_register+0x28/0x34 > [ 1.215678] samsung_serial_init+0x30/0x8c > [ 1.215687] do_one_initcall+0x7c/0x1c0 > [ 1.215689] kernel_init_freeable+0x1bc/0x284 > [ 1.215695] kernel_init+0x24/0x1dc > [ 1.215697] ret_from_fork+0x10/0x20 > [ 1.215701] SMP: stopping secondary CPUs > [ 1.215708] Kernel Offset: 0x40ebaa200000 from 0xffff800080000000 > [ 1.215710] PHYS_OFFSET: 0xffffc18980000000 > [ 1.215711] CPU features: 0xc0000001,70020143,1000720b > [ 1.215714] Memory Limit: none > > > > Signed-off-by: Hyunki Koo > > Reviewed-by: Krzysztof Kozlowski > > Tested on Odroid HC1 (Exynos5422): > > Tested-by: Krzysztof Kozlowski > > --- > > drivers/tty/serial/samsung_tty.c | 62 ++++++++++++++++++++++++++++++++++++---- > > 1 file changed, 57 insertions(+), 5 deletions(-) > > > > diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c > > index 326b0164609c..6ef614d8648c 100644 > > --- a/drivers/tty/serial/samsung_tty.c > > +++ b/drivers/tty/serial/samsung_tty.c > > @@ -154,10 +154,33 @@ struct s3c24xx_uart_port { > > #define portaddrl(port, reg) \ > > ((unsigned long *)(unsigned long)((port)->membase + (reg))) > > > > -#define rd_reg(port, reg) (readb_relaxed(portaddr(port, reg))) > > +static u32 rd_reg(struct uart_port *port, u32 reg) > > +{ > > + switch (port->iotype) { > > + case UPIO_MEM: > > + return readb_relaxed(portaddr(port, reg)); > > + case UPIO_MEM32: > > + return readl_relaxed(portaddr(port, reg)); > > + default: > > + return 0; > > + } > > + return 0; > > +} > > + > > #define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg))) > > > > -#define wr_reg(port, reg, val) writeb_relaxed(val, portaddr(port, reg)) > > +static void wr_reg(struct uart_port *port, u32 reg, u32 val) > > +{ > > + switch (port->iotype) { > > + case UPIO_MEM: > > + writeb_relaxed(val, portaddr(port, reg)); > > + break; > > + case UPIO_MEM32: > > + writel_relaxed(val, portaddr(port, reg)); > > + break; > > + } > > +} > > + > > #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg)) > > > > /* Byte-order aware bit setting/clearing functions. */ > > @@ -1974,7 +1997,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) > > struct device_node *np = pdev->dev.of_node; > > struct s3c24xx_uart_port *ourport; > > int index = probe_index; > > - int ret; > > + int ret, prop = 0; > > > > if (np) { > > ret = of_alias_get_id(np, "serial"); > > @@ -2000,10 +2023,27 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) > > dev_get_platdata(&pdev->dev) : > > ourport->drv_data->def_cfg; > > > > - if (np) > > + if (np) { > > of_property_read_u32(np, > > "samsung,uart-fifosize", &ourport->port.fifosize); > > > > + if (of_property_read_u32(np, "reg-io-width", &prop) == 0) { > > + switch (prop) { > > + case 1: > > + ourport->port.iotype = UPIO_MEM; > > + break; > > + case 4: > > + ourport->port.iotype = UPIO_MEM32; > > + break; > > + default: > > + dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n", > > + prop); > > + ret = -EINVAL; > > + break; > > + } > > + } > > + } > > + > > if (ourport->drv_data->fifosize[index]) > > ourport->port.fifosize = ourport->drv_data->fifosize[index]; > > else if (ourport->info->fifosize) > > @@ -2587,6 +2627,18 @@ module_platform_driver(samsung_serial_driver); > > * Early console. > > */ > > > > +static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val) > > +{ > > + switch (port->iotype) { > > + case UPIO_MEM: > > + writeb(val, portaddr(port, reg)); > > + break; > > + case UPIO_MEM32: > > + writel(val, portaddr(port, reg)); > > + break; > > + } > > +} > > + > > struct samsung_early_console_data { > > u32 txfull_mask; > > }; > > @@ -2612,7 +2664,7 @@ static void samsung_early_putc(struct uart_port *port, int c) > > else > > samsung_early_busyuart(port); > > > > - writeb(c, port->membase + S3C2410_UTXH); > > + wr_reg_barrier(port, S3C2410_UTXH, c); > > } > > > > static void samsung_early_write(struct console *con, const char *s, > >