From: Adrian Hunter <adrian.hunter@intel.com>
To: Pramod Gurav <pramod.gurav@linaro.org>,
linux-mmc@vger.kernel.org, linux-arm-msm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, ulf.hansson@linaro.org,
Ritesh Harjani <riteshh@codeaurora.org>,
Georgi Djakov <georgi.djakov@linaro.org>,
Stephen Boyd <sboyd@codeaurora.org>
Subject: Re: [PATCH v3] mmc: sdhci-msm: Add pm_runtime and system PM support
Date: Thu, 8 Sep 2016 11:02:37 +0300 [thread overview]
Message-ID: <a0e314de-3590-399c-27c7-ddd6461dee42@intel.com> (raw)
In-Reply-To: <20160901142335.2396-1-pramod.gurav@linaro.org>
On 01/09/16 17:23, Pramod Gurav wrote:
> Provides runtime PM callbacks to enable and disable clock resources
> when idle. Also support system PM callbacks to be called during system
> suspend and resume.
>
> Signed-off-by: Pramod Gurav <pramod.gurav@linaro.org>
Can we get some Tested/Reviewed/Acked-by from people using this driver?
> ---
> Changes in v3:
> - Added CONFIG_PM around runtime pm function.
> - Replaced msm suspend/resume with generic function directly
> - Use SET_SYSTEM_SLEEP_PM_OPS instead of late version
>
> Changes in v2:
> - Moved pm_rutime enabling before adding host
> - Handled pm_rutime in remove
> - Changed runtime handling with reference from sdhci-of-at91.c
>
> drivers/mmc/host/sdhci-msm.c | 71 +++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 70 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 8ef44a2a..0ef4f29 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -18,6 +18,7 @@
> #include <linux/of_device.h>
> #include <linux/delay.h>
> #include <linux/mmc/mmc.h>
> +#include <linux/pm_runtime.h>
> #include <linux/slab.h>
>
> #include "sdhci-pltfm.h"
> @@ -658,12 +659,26 @@ static int sdhci_msm_probe(struct platform_device *pdev)
> goto clk_disable;
> }
>
> + pm_runtime_get_noresume(&pdev->dev);
> + pm_runtime_set_active(&pdev->dev);
> + pm_runtime_enable(&pdev->dev);
> + pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
> + pm_runtime_use_autosuspend(&pdev->dev);
> +
> ret = sdhci_add_host(host);
> if (ret)
> - goto clk_disable;
> + goto pm_runtime_disable;
> +
> + platform_set_drvdata(pdev, host);
> +
> + pm_runtime_put_autosuspend(&pdev->dev);
>
> return 0;
>
> +pm_runtime_disable:
> + pm_runtime_disable(&pdev->dev);
> + pm_runtime_set_suspended(&pdev->dev);
> + pm_runtime_put_noidle(&pdev->dev);
> clk_disable:
> clk_disable_unprepare(msm_host->clk);
> pclk_disable:
> @@ -685,6 +700,11 @@ static int sdhci_msm_remove(struct platform_device *pdev)
> 0xffffffff);
>
> sdhci_remove_host(host, dead);
> +
> + pm_runtime_get_sync(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
> + pm_runtime_put_noidle(&pdev->dev);
> +
> clk_disable_unprepare(msm_host->clk);
> clk_disable_unprepare(msm_host->pclk);
> if (!IS_ERR(msm_host->bus_clk))
> @@ -693,12 +713,61 @@ static int sdhci_msm_remove(struct platform_device *pdev)
> return 0;
> }
>
> +#ifdef CONFIG_PM
> +static int sdhci_msm_runtime_suspend(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> + int ret;
> +
> + ret = sdhci_runtime_suspend_host(host);
> + if (ret)
> + return ret;
> +
> + clk_disable_unprepare(msm_host->clk);
> + clk_disable_unprepare(msm_host->pclk);
> +
> + return 0;
> +}
> +
> +static int sdhci_msm_runtime_resume(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> + int ret;
> +
> + ret = clk_prepare_enable(msm_host->clk);
> + if (ret) {
> + dev_err(dev, "clk_enable failed: %d\n", ret);
> + return ret;
> + }
> + ret = clk_prepare_enable(msm_host->pclk);
> + if (ret) {
> + dev_err(dev, "clk_enable failed: %d\n", ret);
> + clk_disable_unprepare(msm_host->clk);
> + return ret;
> + }
> +
> + return sdhci_runtime_resume_host(host);
> +}
> +#endif
> +
> +static const struct dev_pm_ops sdhci_msm_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> + pm_runtime_force_resume)
> + SET_RUNTIME_PM_OPS(sdhci_msm_runtime_suspend, sdhci_msm_runtime_resume,
> + NULL)
> +};
> +
> static struct platform_driver sdhci_msm_driver = {
> .probe = sdhci_msm_probe,
> .remove = sdhci_msm_remove,
> .driver = {
> .name = "sdhci_msm",
> .of_match_table = sdhci_msm_dt_match,
> + .pm = &sdhci_msm_pm_ops,
> },
> };
>
>
next prev parent reply other threads:[~2016-09-08 8:07 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-01 14:23 [PATCH v3] mmc: sdhci-msm: Add pm_runtime and system PM support Pramod Gurav
2016-09-08 8:02 ` Adrian Hunter [this message]
2016-09-09 10:18 ` Georgi Djakov
2016-09-15 7:59 ` Pramod Gurav
2016-09-15 10:19 ` Ulf Hansson
2016-09-15 13:58 ` Pramod Gurav
2016-09-22 14:32 ` Ritesh Harjani
2016-09-23 6:26 ` Pramod Gurav
2016-09-23 10:07 ` Ulf Hansson
2016-09-27 4:40 ` Ritesh Harjani
2016-09-09 10:00 ` Tummala, Sahitya
2016-09-12 7:47 ` Pramod Gurav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a0e314de-3590-399c-27c7-ddd6461dee42@intel.com \
--to=adrian.hunter@intel.com \
--cc=georgi.djakov@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=pramod.gurav@linaro.org \
--cc=riteshh@codeaurora.org \
--cc=sboyd@codeaurora.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).