Hi Ulf, On Thu, 2020-03-12 at 14:08 +0100, Ulf Hansson wrote: > On Fri, 6 Mar 2020 at 18:44, Nicolas Saenz Julienne > wrote: > > The series first cleans up a common pattern, which is ultimately needed > > to integrate the regulator with bcm2711's sdhci-iproc. It then > > introduces the relevant device-tree changes. > > > > --- > > > > Changes since v1: > > - Use helper function istead of quirk > > - Add GPIO label > > > > Nicolas Saenz Julienne (11): > > mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage() > > mmc: sdhci: arasan: Use sdhci_set_power_and_voltage() > > mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage() > > mmc: sdhci: at91: Use sdhci_set_power_and_voltage() > > mmc: sdhci: pxav3: Use sdhci_set_power_and_voltage() > > mmc: sdhci: xenon: Use sdhci_set_power_and_voltage() > > mmc: sdhci: am654: Use sdhci_set_power_and_voltage() > > mmc: sdhci: Unexport sdhci_set_power_noreg() > > mmc: sdhci: iproc: Add custom set_power() callback for bcm2711 > > ARM: dts: bcm2711: Update expgpio's GPIO labels > > ARM: dts: bcm2711: Add vmmc regulator in emmc2 > > > > arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 13 ++++++++++++- > > drivers/mmc/host/sdhci-iproc.c | 17 ++++++++++++++++- > > drivers/mmc/host/sdhci-milbeaut.c | 13 +------------ > > drivers/mmc/host/sdhci-of-arasan.c | 15 ++------------- > > drivers/mmc/host/sdhci-of-at91.c | 18 +----------------- > > drivers/mmc/host/sdhci-pxav3.c | 20 +------------------- > > drivers/mmc/host/sdhci-xenon.c | 20 +------------------- > > drivers/mmc/host/sdhci.c | 24 +++++++++++++++++++++--- > > drivers/mmc/host/sdhci.h | 5 +++-- > > drivers/mmc/host/sdhci_am654.c | 17 +++-------------- > > 10 files changed, 61 insertions(+), 101 deletions(-) > > > > -- > > 2.25.1 > > > > Patch 1-4, 6, 9 applied for next, thanks! I think you meant to apply 1-4, 7 and 9. Patch 6 is one of the contentious ones. Regards, Nicolas