LKML Archive on
 help / color / Atom feed
From: Steev Klimaszewski <>
To: Sibi Sankar <>,
Subject: Re: [PATCH v2] arm64: dts: qcom: sdm845: Add cpu OPP tables
Date: Wed, 8 Jul 2020 21:22:23 -0500
Message-ID: <> (raw)
In-Reply-To: <>

On 7/2/20 3:46 PM, Sibi Sankar wrote:
> Add OPP tables required to scale DDR/L3 per freq-domain on SDM845 SoCs.
> Signed-off-by: Sibi Sankar <>
> ---

Hi Sibi,

Bjorn asked me to give this patch a whirl, and I have to say, I like it
but I'm not sure if I'm missing a dependency somewhere...

In 5.8.0-rc4, I'm seeing a couple probe defers

[    0.131341] cpu cpu0: _allocate_opp_table: Error finding interconnect
paths: -517

[    0.132694] cpu cpu4: _allocate_opp_table: Error finding interconnect
paths: -517

And then a bit later on,

[    0.625837] cpu cpu0: failed to get clock: -2

If these aren't anything to worry about, you can throw my Tested-by on

Tested-by: Steev Klimaszewski <>

  reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-02 20:46 Sibi Sankar
2020-07-09  2:22 ` Steev Klimaszewski [this message]
2020-07-09 14:29   ` Bjorn Andersson
2020-07-09 14:43     ` Sibi Sankar
2020-07-09 14:45 ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git
	git clone --mirror lkml/git/8.git
	git clone --mirror lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone