From: "Ardelean, Alexandru" <alexandru.Ardelean@analog.com>
To: "lkp@intel.com" <lkp@intel.com>
Cc: "davem@davemloft.net" <davem@davemloft.net>,
"linux-stm32@st-md-mailman.stormreply.com"
<linux-stm32@st-md-mailman.stormreply.com>,
"joabreu@synopsys.com" <joabreu@synopsys.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"kbuild-all@01.org" <kbuild-all@01.org>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"alexandre.torgue@st.com" <alexandre.torgue@st.com>,
"peppe.cavallaro@st.com" <peppe.cavallaro@st.com>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"mcoquelin.stm32@gmail.com" <mcoquelin.stm32@gmail.com>
Subject: Re: [PATCH] net: stmmac: socfpga: re-use the `interface` parameter from platform data
Date: Mon, 9 Sep 2019 08:53:06 +0000 [thread overview]
Message-ID: <a7dc54d6e1fad0dc464a30101c8740b8c11f2d8b.camel@analog.com> (raw)
In-Reply-To: <201909072036.v1rX0Vwh%lkp@intel.com>
On Sat, 2019-09-07 at 20:54 +0800, kbuild test robot wrote:
> [External]
>
> Hi Alexandru,
>
> I love your patch! Yet something to improve:
>
> [auto build test ERROR on linus/master]
Hmm, this error should be expectable I guess: I applied this on net-next/master.
Alex
> [cannot apply to v5.3-rc7 next-20190904]
> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
>
> url:
> https://github.com/0day-ci/linux/commits/Alexandru-Ardelean/net-stmmac-socfpga-re-use-the-interface-parameter-from-platform-data/20190907-190627
> config: sparc64-allmodconfig (attached as .config)
> compiler: sparc64-linux-gcc (GCC) 7.4.0
> reproduce:
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # save the attached .config to linux build tree
> GCC_VERSION=7.4.0 make.cross ARCH=sparc64
>
> If you fix the issue, kindly add following tag
> Reported-by: kbuild test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
> In file included from include/linux/dma-mapping.h:7:0,
> from include/linux/skbuff.h:30,
> from include/linux/if_ether.h:19,
> from include/uapi/linux/ethtool.h:19,
> from include/linux/ethtool.h:18,
> from include/linux/phy.h:16,
> from drivers/net//ethernet/stmicro/stmmac/dwmac-socfpga.c:11:
> drivers/net//ethernet/stmicro/stmmac/dwmac-socfpga.c: In function 'socfpga_gen5_set_phy_mode':
> > > drivers/net//ethernet/stmicro/stmmac/dwmac-socfpga.c:264:44: error: 'phymode' undeclared (first use in this
> > > function); did you mean 'phy_modes'?
> dev_err(dwmac->dev, "bad phy mode %d\n", phymode);
> ^
> include/linux/device.h:1499:32: note: in definition of macro 'dev_err'
> _dev_err(dev, dev_fmt(fmt), ##__VA_ARGS__)
> ^~~~~~~~~~~
> drivers/net//ethernet/stmicro/stmmac/dwmac-socfpga.c:264:44: note: each undeclared identifier is reported only once
> for each function it appears in
> dev_err(dwmac->dev, "bad phy mode %d\n", phymode);
> ^
> include/linux/device.h:1499:32: note: in definition of macro 'dev_err'
> _dev_err(dev, dev_fmt(fmt), ##__VA_ARGS__)
> ^~~~~~~~~~~
> drivers/net//ethernet/stmicro/stmmac/dwmac-socfpga.c: In function 'socfpga_gen10_set_phy_mode':
> drivers/net//ethernet/stmicro/stmmac/dwmac-socfpga.c:340:6: error: 'phymode' undeclared (first use in this
> function); did you mean 'phy_modes'?
> phymode == PHY_INTERFACE_MODE_MII ||
> ^~~~~~~
> phy_modes
>
> vim +264 drivers/net//ethernet/stmicro/stmmac/dwmac-socfpga.c
>
> 40ae25505fe834 Dinh Nguyen 2019-06-05 255
> 40ae25505fe834 Dinh Nguyen 2019-06-05 256 static int socfpga_gen5_set_phy_mode(struct socfpga_dwmac *dwmac)
> 40ae25505fe834 Dinh Nguyen 2019-06-05 257 {
> 40ae25505fe834 Dinh Nguyen 2019-06-05 258 struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr;
> 40ae25505fe834 Dinh Nguyen 2019-06-05 259 u32 reg_offset = dwmac->reg_offset;
> 40ae25505fe834 Dinh Nguyen 2019-06-05 260 u32 reg_shift = dwmac->reg_shift;
> 40ae25505fe834 Dinh Nguyen 2019-06-05 261 u32 ctrl, val, module;
> 40ae25505fe834 Dinh Nguyen 2019-06-05 262
> 6169afbe4a340b Alexandru Ardelean 2019-09-06 263 if (socfpga_set_phy_mode_common(dwmac, &val)) {
> 801d233b7302ee Dinh Nguyen 2014-03-26 @264 dev_err(dwmac->dev, "bad phy mode %d\n", phymode);
> 801d233b7302ee Dinh Nguyen 2014-03-26 265 return -EINVAL;
> 801d233b7302ee Dinh Nguyen 2014-03-26 266 }
> 801d233b7302ee Dinh Nguyen 2014-03-26 267
> b4834c86e11baf Ley Foon Tan 2014-08-20 268 /* Overwrite val to GMII if splitter core is enabled. The
> phymode here
> b4834c86e11baf Ley Foon Tan 2014-08-20 269 * is the actual phy mode on phy hardware, but phy interface
> from
> b4834c86e11baf Ley Foon Tan 2014-08-20 270 * EMAC core is GMII.
> b4834c86e11baf Ley Foon Tan 2014-08-20 271 */
> b4834c86e11baf Ley Foon Tan 2014-08-20 272 if (dwmac->splitter_base)
> b4834c86e11baf Ley Foon Tan 2014-08-20 273 val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
> b4834c86e11baf Ley Foon Tan 2014-08-20 274
> 70cb136f773083 Joachim Eastwood 2016-05-01 275 /* Assert reset to the enet controller before changing the phy
> mode */
> bc8a2d9bcbf1ca Dinh Nguyen 2018-06-19 276 reset_control_assert(dwmac->stmmac_ocp_rst);
> 70cb136f773083 Joachim Eastwood 2016-05-01 277 reset_control_assert(dwmac->stmmac_rst);
> 70cb136f773083 Joachim Eastwood 2016-05-01 278
> 801d233b7302ee Dinh Nguyen 2014-03-26 279 regmap_read(sys_mgr_base_addr, reg_offset, &ctrl);
> 801d233b7302ee Dinh Nguyen 2014-03-26 280 ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
> 801d233b7302ee Dinh Nguyen 2014-03-26 281 ctrl |= val << reg_shift;
> 801d233b7302ee Dinh Nguyen 2014-03-26 282
> 013dae5dbc07aa Stephan Gatzka 2017-08-22 283 if (dwmac->f2h_ptp_ref_clk ||
> 013dae5dbc07aa Stephan Gatzka 2017-08-22 284 phymode == PHY_INTERFACE_MODE_MII ||
> 013dae5dbc07aa Stephan Gatzka 2017-08-22 285 phymode == PHY_INTERFACE_MODE_GMII ||
> 013dae5dbc07aa Stephan Gatzka 2017-08-22 286 phymode == PHY_INTERFACE_MODE_SGMII) {
> 43569814fa35b2 Phil Reid 2015-12-14 287 ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK <<
> (reg_shift / 2);
> 734e00fa02eff5 Phil Reid 2016-04-07 288 regmap_read(sys_mgr_base_addr,
> SYSMGR_FPGAGRP_MODULE_REG,
> 734e00fa02eff5 Phil Reid 2016-04-07 289 &module);
> 734e00fa02eff5 Phil Reid 2016-04-07 290 module |= (SYSMGR_FPGAGRP_MODULE_EMAC << (reg_shift /
> 2));
> 734e00fa02eff5 Phil Reid 2016-04-07 291 regmap_write(sys_mgr_base_addr,
> SYSMGR_FPGAGRP_MODULE_REG,
> 734e00fa02eff5 Phil Reid 2016-04-07 292 module);
> 734e00fa02eff5 Phil Reid 2016-04-07 293 } else {
> 43569814fa35b2 Phil Reid 2015-12-14 294 ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK <<
> (reg_shift / 2));
> 734e00fa02eff5 Phil Reid 2016-04-07 295 }
> 43569814fa35b2 Phil Reid 2015-12-14 296
> 801d233b7302ee Dinh Nguyen 2014-03-26 297 regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
> 734e00fa02eff5 Phil Reid 2016-04-07 298
> 70cb136f773083 Joachim Eastwood 2016-05-01 299 /* Deassert reset for the phy configuration to be sampled by
> 70cb136f773083 Joachim Eastwood 2016-05-01 300 * the enet controller, and operation to start in requested mode
> 70cb136f773083 Joachim Eastwood 2016-05-01 301 */
> bc8a2d9bcbf1ca Dinh Nguyen 2018-06-19 302 reset_control_deassert(dwmac->stmmac_ocp_rst);
> 70cb136f773083 Joachim Eastwood 2016-05-01 303 reset_control_deassert(dwmac->stmmac_rst);
> fb3bbdb859891e Tien Hock Loh 2016-07-07 304 if (phymode == PHY_INTERFACE_MODE_SGMII) {
> fb3bbdb859891e Tien Hock Loh 2016-07-07 305 if (tse_pcs_init(dwmac->pcs.tse_pcs_base, &dwmac->pcs)
> != 0) {
> fb3bbdb859891e Tien Hock Loh 2016-07-07 306 dev_err(dwmac->dev, "Unable to initialize TSE
> PCS");
> fb3bbdb859891e Tien Hock Loh 2016-07-07 307 return -EINVAL;
> fb3bbdb859891e Tien Hock Loh 2016-07-07 308 }
> fb3bbdb859891e Tien Hock Loh 2016-07-07 309 }
> 70cb136f773083 Joachim Eastwood 2016-05-01 310
> 801d233b7302ee Dinh Nguyen 2014-03-26 311 return 0;
> 801d233b7302ee Dinh Nguyen 2014-03-26 312 }
> 801d233b7302ee Dinh Nguyen 2014-03-26 313
>
> :::::: The code at line 264 was first introduced by commit
> :::::: 801d233b7302eeab94750427a623c10c044cb0ca net: stmmac: Add SOCFPGA glue driver
>
> :::::: TO: Dinh Nguyen <dinguyen@altera.com>
> :::::: CC: David S. Miller <davem@davemloft.net>
>
> ---
> 0-DAY kernel test infrastructure Open Source Technology Center
> https://lists.01.org/pipermail/kbuild-all Intel Corporation
next prev parent reply other threads:[~2019-09-09 8:53 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-06 12:30 [PATCH] net: stmmac: socfpga: re-use the `interface` parameter from platform data Alexandru Ardelean
2019-09-07 12:54 ` kbuild test robot
2019-09-09 8:53 ` Ardelean, Alexandru [this message]
2019-10-09 8:05 ` [kbuild-all] " Rong Chen
2019-09-10 15:45 ` David Miller
2019-09-10 15:46 ` David Miller
2019-09-11 5:03 ` Ardelean, Alexandru
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a7dc54d6e1fad0dc464a30101c8740b8c11f2d8b.camel@analog.com \
--to=alexandru.ardelean@analog.com \
--cc=alexandre.torgue@st.com \
--cc=davem@davemloft.net \
--cc=joabreu@synopsys.com \
--cc=kbuild-all@01.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=lkp@intel.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).