[PATCH v1 4/8] powerpc/fsl_booke: Enable reloading of TLBCAM without switching to AS1

[Christophe Leroy <christophe.leroy@csgroup.eu>]

Avoid switching to AS1 when reloading TLBCAM after init for
STRICT_KERNEL_RWX.

When we setup AS1 we expect the entire accessible memory to be mapped
through one entry, this is not the case anymore at the end of init.

We are not changing the size of TLBCAMs, only flags, so no need to
switch to AS1.

So change loadcam_multi() to not switch to AS1 when the given
temporary tlb entry in 0.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 arch/powerpc/mm/nohash/tlb_low.S | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/mm/nohash/tlb_low.S b/arch/powerpc/mm/nohash/tlb_low.S
index 5add4a51e51f..dd39074de9af 100644
--- a/arch/powerpc/mm/nohash/tlb_low.S
+++ b/arch/powerpc/mm/nohash/tlb_low.S
@@ -369,7 +369,7 @@ _GLOBAL(_tlbivax_bcast)
  * extern void loadcam_entry(unsigned int index)
  *
  * Load TLBCAM[index] entry in to the L2 CAM MMU
- * Must preserve r7, r8, r9, r10 and r11
+ * Must preserve r7, r8, r9, r10, r11, r12
  */
 _GLOBAL(loadcam_entry)
 	mflr	r5
@@ -401,7 +401,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
  *
  * r3 = first entry to write
  * r4 = number of entries to write
- * r5 = temporary tlb entry
+ * r5 = temporary tlb entry (0 means no switch to AS1)
  */
 _GLOBAL(loadcam_multi)
 	mflr	r8
@@ -409,6 +409,8 @@ _GLOBAL(loadcam_multi)
 	mfmsr	r11
 	andi.	r11,r11,MSR_IS
 	bne	10f
+	mr.	r12, r5
+	beq	10f
 
 	/*
 	 * Set up temporary TLB entry that is the same as what we're
@@ -446,6 +448,8 @@ _GLOBAL(loadcam_multi)
 	/* Don't return to AS=0 if we were in AS=1 at function start */
 	andi.	r11,r11,MSR_IS
 	bne	3f
+	cmpwi	r12, 0
+	beq	3f
 
 	/* Return to AS=0 and clear the temporary entry */
 	mfmsr	r6
-- 
2.31.1