linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* USB devices on Dell TB16 dock stop working after resuming
@ 2019-11-04 13:13 Paul Menzel
  2019-11-04 14:24 ` Mika Westerberg
  0 siblings, 1 reply; 34+ messages in thread
From: Paul Menzel @ 2019-11-04 13:13 UTC (permalink / raw)
  To: Andreas Noever, Michael Jamet, Mika Westerberg, Yehezkel Bernat
  Cc: Christian Kellner, Linux Kernel Mailing List, Mario Limonciello


[-- Attachment #1.1: Type: text/plain, Size: 512 bytes --]

Dear Linux folks,


On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
suspending the system, and resuming with Dell’s Thunderbolt TB16
dock connected, the USB input devices, keyboard and mouse,
connected to the TB16 stop working. They work for a few seconds
(mouse cursor can be moved), but then stop working. The laptop
keyboard and touchpad still works fine. All firmware is up-to-date
according to `fwupdmgr`.

Please find the Linux messages attached.


Kind regards,

Paul

[-- Attachment #1.2: 20191101b--dmesg.txt --]
[-- Type: text/plain, Size: 96132 bytes --]

[    0.463803] pci 0000:3f:00.0: PME# supported from D3cold
[    0.464089] pci 0000:3e:01.0: PCI bridge to [bus 3f]
[    0.464111] pci 0000:3e:01.0:   bridge window [mem 0xc4000000-0xc40fffff]
[    0.464220] pci 0000:3e:04.0: PCI bridge to [bus 40-6d]
[    0.464241] pci 0000:3e:04.0:   bridge window [mem 0xc4100000-0xd9ffffff]
[    0.464256] pci 0000:3e:04.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[    0.464560] pci 0000:6e:00.0: [1344:5410] type 00 class 0x010802
[    0.464583] pci 0000:6e:00.0: reg 0x10: [mem 0xdc300000-0xdc303fff 64bit]
[    0.464870] pci 0000:00:1d.4: PCI bridge to [bus 6e]
[    0.464873] pci 0000:00:1d.4:   bridge window [mem 0xdc300000-0xdc3fffff]
[    0.468165] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.468218] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
[    0.468269] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.468320] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.468371] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.468422] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.468473] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.468524] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.482170] ACPI: EC: interrupt unblocked
[    0.482180] ACPI: EC: event unblocked
[    0.482196] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.482197] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions and events
[    0.482653] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.482653] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.482653] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.482653] vgaarb: loaded
[    0.482752] EDAC MC: Ver: 3.0.0
[    0.483874] Registered efivars operations
[    0.483874] PCI: Using ACPI for IRQ routing
[    0.519201] PCI: pci_cache_line_size set to 64 bytes
[    0.519918] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.519919] e820: reserve RAM buffer [mem 0x2a059000-0x2bffffff]
[    0.519920] e820: reserve RAM buffer [mem 0x3a927000-0x3bffffff]
[    0.519920] e820: reserve RAM buffer [mem 0x48e00000-0x4bffffff]
[    0.519921] e820: reserve RAM buffer [mem 0x4ae800000-0x4afffffff]
[    0.520127] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.520129] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.521960] clocksource: Switched to clocksource tsc-early
[    0.528569] VFS: Disk quotas dquot_6.6.0
[    0.528579] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.528668] AppArmor: AppArmor Filesystem Enabled
[    0.528677] pnp: PnP ACPI init
[    0.528744] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[    0.528747] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.528858] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.528859] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.528861] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.528889] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.528948] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.528950] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.529027] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.529036] pnp 00:05: Plug and Play ACPI device, IDs DLL08af PNP0f13 (active)
[    0.529154] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.529155] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.529156] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.529157] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.529157] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.529158] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.529159] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.529159] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.529161] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.529305] system 00:07: [io  0x1800-0x18fe] could not be reserved
[    0.529306] system 00:07: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.529307] system 00:07: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.529307] system 00:07: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.529308] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.529309] system 00:07: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.529309] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.529311] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.529505] system 00:08: [io  0x2000-0x20fe] has been reserved
[    0.529507] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.530166] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.536095] pnp: PnP ACPI: found 10 devices
[    0.536733] thermal_sys: Registered thermal governor 'fair_share'
[    0.536734] thermal_sys: Registered thermal governor 'bang_bang'
[    0.536734] thermal_sys: Registered thermal governor 'step_wise'
[    0.536734] thermal_sys: Registered thermal governor 'user_space'
[    0.541219] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.541237] pci 0000:04:01.0: bridge window [io  0x1000-0x0fff] to [bus 06-38] add_size 1000
[    0.541238] pci 0000:3e:04.0: bridge window [io  0x1000-0x0fff] to [bus 40-6d] add_size 1000
[    0.541239] pci 0000:3d:00.0: bridge window [io  0x1000-0x0fff] to [bus 3e-6d] add_size 1000
[    0.541240] pci 0000:3b:04.0: bridge window [io  0x1000-0x0fff] to [bus 3d-6d] add_size 2000
[    0.541241] pci 0000:3a:00.0: bridge window [io  0x1000-0x0fff] to [bus 3b-6d] add_size 2000
[    0.541242] pci 0000:04:04.0: bridge window [io  0x1000-0x0fff] to [bus 3a-6d] add_size 3000
[    0.541242] pci 0000:03:00.0: bridge window [io  0x1000-0x0fff] to [bus 04-6d] add_size 4000
[    0.541243] pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 03-6d] add_size 5000
[    0.541250] pci 0000:00:15.0: BAR 0: assigned [mem 0x4f800000-0x4f800fff 64bit]
[    0.541302] pci 0000:00:15.1: BAR 0: assigned [mem 0x4f801000-0x4f801fff 64bit]
[    0.541347] pci 0000:00:1d.0: BAR 13: assigned [io  0x4000-0x8fff]
[    0.541349] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.541351] pci 0000:00:1c.0:   bridge window [mem 0xdc400000-0xdc4fffff]
[    0.541355] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    0.541358] pci 0000:00:1c.6:   bridge window [mem 0xdc000000-0xdc1fffff]
[    0.541362] pci 0000:03:00.0: BAR 13: assigned [io  0x4000-0x7fff]
[    0.541363] pci 0000:04:01.0: BAR 13: assigned [io  0x4000-0x4fff]
[    0.541364] pci 0000:04:04.0: BAR 13: assigned [io  0x5000-0x7fff]
[    0.541365] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.541368] pci 0000:04:00.0:   bridge window [mem 0xda000000-0xda0fffff]
[    0.541375] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[    0.541377] pci 0000:04:01.0:   bridge window [io  0x4000-0x4fff]
[    0.541381] pci 0000:04:01.0:   bridge window [mem 0xac000000-0xc3efffff]
[    0.541384] pci 0000:04:01.0:   bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[    0.541388] pci 0000:04:02.0: PCI bridge to [bus 39]
[    0.541392] pci 0000:04:02.0:   bridge window [mem 0xc3f00000-0xc3ffffff]
[    0.541399] pci 0000:3a:00.0: BAR 13: assigned [io  0x5000-0x6fff]
[    0.541400] pci 0000:3b:04.0: BAR 13: assigned [io  0x5000-0x6fff]
[    0.541401] pci 0000:3b:01.0: PCI bridge to [bus 3c]
[    0.541423] pci 0000:3d:00.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.541423] pci 0000:3e:04.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.541424] pci 0000:3e:01.0: PCI bridge to [bus 3f]
[    0.541435] pci 0000:3e:01.0:   bridge window [mem 0xc4000000-0xc40fffff]
[    0.541457] pci 0000:3e:04.0: PCI bridge to [bus 40-6d]
[    0.541461] pci 0000:3e:04.0:   bridge window [io  0x5000-0x5fff]
[    0.541472] pci 0000:3e:04.0:   bridge window [mem 0xc4100000-0xd9ffffff]
[    0.541480] pci 0000:3e:04.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[    0.541495] pci 0000:3d:00.0: PCI bridge to [bus 3e-6d]
[    0.541499] pci 0000:3d:00.0:   bridge window [io  0x5000-0x5fff]
[    0.541510] pci 0000:3d:00.0:   bridge window [mem 0xc4000000-0xd9ffffff]
[    0.541517] pci 0000:3d:00.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[    0.541532] pci 0000:3b:04.0: PCI bridge to [bus 3d-6d]
[    0.541535] pci 0000:3b:04.0:   bridge window [io  0x5000-0x6fff]
[    0.541542] pci 0000:3b:04.0:   bridge window [mem 0xc4000000-0xd9ffffff]
[    0.541547] pci 0000:3b:04.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[    0.541557] pci 0000:3a:00.0: PCI bridge to [bus 3b-6d]
[    0.541560] pci 0000:3a:00.0:   bridge window [io  0x5000-0x6fff]
[    0.541567] pci 0000:3a:00.0:   bridge window [mem 0xc4000000-0xd9ffffff]
[    0.541572] pci 0000:3a:00.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[    0.541582] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[    0.541583] pci 0000:04:04.0:   bridge window [io  0x5000-0x7fff]
[    0.541587] pci 0000:04:04.0:   bridge window [mem 0xc4000000-0xd9ffffff]
[    0.541589] pci 0000:04:04.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[    0.541594] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[    0.541596] pci 0000:03:00.0:   bridge window [io  0x4000-0x7fff]
[    0.541599] pci 0000:03:00.0:   bridge window [mem 0xac000000-0xda0fffff]
[    0.541602] pci 0000:03:00.0:   bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[    0.541606] pci 0000:00:1d.0: PCI bridge to [bus 03-6d]
[    0.541608] pci 0000:00:1d.0:   bridge window [io  0x4000-0x8fff]
[    0.541610] pci 0000:00:1d.0:   bridge window [mem 0xac000000-0xda0fffff]
[    0.541611] pci 0000:00:1d.0:   bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[    0.541614] pci 0000:00:1d.4: PCI bridge to [bus 6e]
[    0.541617] pci 0000:00:1d.4:   bridge window [mem 0xdc300000-0xdc3fffff]
[    0.541621] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.541622] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.541623] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.541623] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.541624] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.541624] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.541625] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.541625] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.541626] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.541626] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.541627] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.541627] pci_bus 0000:00: resource 15 [mem 0x4f800000-0xdfffffff window]
[    0.541628] pci_bus 0000:00: resource 16 [mem 0xfc800000-0xfe7fffff window]
[    0.541629] pci_bus 0000:01: resource 1 [mem 0xdc400000-0xdc4fffff]
[    0.541629] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdc1fffff]
[    0.541630] pci_bus 0000:03: resource 0 [io  0x4000-0x8fff]
[    0.541630] pci_bus 0000:03: resource 1 [mem 0xac000000-0xda0fffff]
[    0.541631] pci_bus 0000:03: resource 2 [mem 0x60000000-0xa9ffffff 64bit pref]
[    0.541631] pci_bus 0000:04: resource 0 [io  0x4000-0x7fff]
[    0.541632] pci_bus 0000:04: resource 1 [mem 0xac000000-0xda0fffff]
[    0.541632] pci_bus 0000:04: resource 2 [mem 0x60000000-0xa9ffffff 64bit pref]
[    0.541633] pci_bus 0000:05: resource 1 [mem 0xda000000-0xda0fffff]
[    0.541634] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    0.541634] pci_bus 0000:06: resource 1 [mem 0xac000000-0xc3efffff]
[    0.541635] pci_bus 0000:06: resource 2 [mem 0x60000000-0x7fffffff 64bit pref]
[    0.541635] pci_bus 0000:39: resource 1 [mem 0xc3f00000-0xc3ffffff]
[    0.541636] pci_bus 0000:3a: resource 0 [io  0x5000-0x7fff]
[    0.541636] pci_bus 0000:3a: resource 1 [mem 0xc4000000-0xd9ffffff]
[    0.541637] pci_bus 0000:3a: resource 2 [mem 0x80000000-0xa9ffffff 64bit pref]
[    0.541637] pci_bus 0000:3b: resource 0 [io  0x5000-0x6fff]
[    0.541638] pci_bus 0000:3b: resource 1 [mem 0xc4000000-0xd9ffffff]
[    0.541638] pci_bus 0000:3b: resource 2 [mem 0x80000000-0xa9ffffff 64bit pref]
[    0.541639] pci_bus 0000:3d: resource 0 [io  0x5000-0x6fff]
[    0.541639] pci_bus 0000:3d: resource 1 [mem 0xc4000000-0xd9ffffff]
[    0.541640] pci_bus 0000:3d: resource 2 [mem 0x80000000-0xa9ffffff 64bit pref]
[    0.541640] pci_bus 0000:3e: resource 0 [io  0x5000-0x5fff]
[    0.541641] pci_bus 0000:3e: resource 1 [mem 0xc4000000-0xd9ffffff]
[    0.541641] pci_bus 0000:3e: resource 2 [mem 0x80000000-0xa9ffffff 64bit pref]
[    0.541642] pci_bus 0000:3f: resource 1 [mem 0xc4000000-0xc40fffff]
[    0.541643] pci_bus 0000:40: resource 0 [io  0x5000-0x5fff]
[    0.541643] pci_bus 0000:40: resource 1 [mem 0xc4100000-0xd9ffffff]
[    0.541644] pci_bus 0000:40: resource 2 [mem 0x80000000-0xa9ffffff 64bit pref]
[    0.541644] pci_bus 0000:6e: resource 1 [mem 0xdc300000-0xdc3fffff]
[    0.541732] NET: Registered protocol family 2
[    0.541807] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.541825] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.541965] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.542122] TCP: Hash tables configured (established 131072 bind 65536)
[    0.542142] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.542179] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.542237] NET: Registered protocol family 1
[    0.542240] NET: Registered protocol family 44
[    0.542245] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.542638] pci 0000:03:00.0: CLS mismatch (64 != 128), using 64 bytes
[    0.542705] pci 0000:03:00.0: enabling device (0006 -> 0007)
[    0.542854] pci 0000:04:04.0: enabling device (0006 -> 0007)
[    0.542887] pci 0000:3a:00.0: enabling device (0006 -> 0007)
[    0.542924] pci 0000:3b:04.0: enabling device (0006 -> 0007)
[    0.542963] pci 0000:3d:00.0: enabling device (0006 -> 0007)
[    0.543180] Trying to unpack rootfs image as initramfs...
[    1.590954] Freeing initrd memory: 17160K
[    1.591013] DMAR: No ATSR found
[    1.591053] DMAR: dmar0: Using Queued invalidation
[    1.591055] DMAR: dmar1: Using Queued invalidation
[    1.591298] pci 0000:00:00.0: Adding to iommu group 0
[    1.595823] pci 0000:00:02.0: Adding to iommu group 1
[    1.596174] pci 0000:00:02.0: Using iommu direct mapping
[    1.596195] pci 0000:00:04.0: Adding to iommu group 2
[    1.596228] pci 0000:00:08.0: Adding to iommu group 3
[    1.596260] pci 0000:00:12.0: Adding to iommu group 4
[    1.596309] pci 0000:00:14.0: Adding to iommu group 5
[    1.596316] pci 0000:00:14.2: Adding to iommu group 5
[    1.596355] pci 0000:00:15.0: Adding to iommu group 6
[    1.596362] pci 0000:00:15.1: Adding to iommu group 6
[    1.596417] pci 0000:00:16.0: Adding to iommu group 7
[    1.596452] pci 0000:00:1c.0: Adding to iommu group 8
[    1.596489] pci 0000:00:1c.6: Adding to iommu group 9
[    1.596525] pci 0000:00:1d.0: Adding to iommu group 10
[    1.596564] pci 0000:00:1d.4: Adding to iommu group 11
[    1.596611] pci 0000:00:1f.0: Adding to iommu group 12
[    1.596619] pci 0000:00:1f.3: Adding to iommu group 12
[    1.596626] pci 0000:00:1f.4: Adding to iommu group 12
[    1.596632] pci 0000:00:1f.5: Adding to iommu group 12
[    1.596666] pci 0000:01:00.0: Adding to iommu group 13
[    1.596705] pci 0000:02:00.0: Adding to iommu group 14
[    1.596741] pci 0000:03:00.0: Adding to iommu group 15
[    1.596783] pci 0000:04:00.0: Adding to iommu group 16
[    1.596818] pci 0000:04:01.0: Adding to iommu group 17
[    1.596874] pci 0000:04:02.0: Adding to iommu group 18
[    1.596911] pci 0000:04:04.0: Adding to iommu group 19
[    1.596921] pci 0000:05:00.0: Adding to iommu group 16
[    1.596931] pci 0000:39:00.0: Adding to iommu group 18
[    1.596941] pci 0000:3a:00.0: Adding to iommu group 19
[    1.596951] pci 0000:3b:01.0: Adding to iommu group 19
[    1.596960] pci 0000:3b:04.0: Adding to iommu group 19
[    1.596977] pci 0000:3d:00.0: Adding to iommu group 19
[    1.596994] pci 0000:3e:01.0: Adding to iommu group 19
[    1.597011] pci 0000:3e:04.0: Adding to iommu group 19
[    1.597036] pci 0000:3f:00.0: Adding to iommu group 19
[    1.597078] pci 0000:6e:00.0: Adding to iommu group 20
[    1.597177] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    1.598555] Initialise system trusted keyrings
[    1.598574] Key type blacklist registered
[    1.598605] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    1.599286] zbud: loaded
[    1.599461] Platform Keyring initialized
[    1.599462] Key type asymmetric registered
[    1.599462] Asymmetric key parser 'x509' registered
[    1.599467] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.599492] io scheduler mq-deadline registered
[    1.601683] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[    1.601823] pcieport 0000:00:1c.6: PME: Signaling with IRQ 123
[    1.601898] pcieport 0000:00:1d.0: PME: Signaling with IRQ 124
[    1.601911] pcieport 0000:00:1d.0: pciehp: Slot #12 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.602072] pcieport 0000:00:1d.4: PME: Signaling with IRQ 125
[    1.602325] pcieport 0000:04:01.0: enabling device (0006 -> 0007)
[    1.602395] pcieport 0000:04:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.602634] pcieport 0000:04:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.603183] pcieport 0000:3b:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.603861] pcieport 0000:3e:04.0: enabling device (0006 -> 0007)
[    1.604033] pcieport 0000:3e:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.604285] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.604295] efifb: probing for efifb
[    1.604301] efifb: framebuffer at 0x50000000, using 8128k, total 8128k
[    1.604302] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    1.604302] efifb: scrolling: redraw
[    1.604303] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.604349] Console: switching to colour frame buffer device 240x67
[    1.606551] fb0: EFI VGA frame buffer device
[    1.606555] intel_idle: MWAIT substates: 0x11142120
[    1.606555] intel_idle: v0.4.1 model 0x8E
[    1.606802] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.608618] thermal LNXTHERM:00: registered as thermal_zone0
[    1.608619] ACPI: Thermal Zone [THM] (25 C)
[    1.608768] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.609276] Linux agpgart interface v0.103
[    1.609321] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.609321] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    1.609673] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.610141] i8042: Warning: Keylock active
[    1.611745] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.611759] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.611844] mousedev: PS/2 mouse device common for all mice
[    1.611883] rtc_cmos 00:02: RTC can wake from S4
[    1.612709] rtc_cmos 00:02: registered as rtc0
[    1.612716] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram
[    1.612720] intel_pstate: Intel P-state driver initializing
[    1.612892] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.615003] intel_pstate: HWP enabled
[    1.615141] ledtrig-cpu: registered to indicate activity on CPUs
[    1.615423] NET: Registered protocol family 10
[    1.621811] Segment Routing with IPv6
[    1.621822] mip6: Mobile IPv6
[    1.621823] NET: Registered protocol family 17
[    1.621846] mpls_gso: MPLS GSO support
[    1.622217] microcode: sig=0x806ec, pf=0x80, revision=0xb8
[    1.622375] microcode: Microcode Update Driver: v2.2.
[    1.622381] sched_clock: Marking stable (1617760519, 4393139)->(1634080979, -11927321)
[    1.622637] registered taskstats version 1
[    1.622637] Loading compiled-in X.509 certificates
[    1.641697] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    1.641706] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[    1.641717] zswap: loaded using pool lzo/zbud
[    1.641778] AppArmor: AppArmor sha1 policy hashing enabled
[    1.642599] integrity: Loading X.509 certificate: UEFI:db
[    1.642624] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
[    1.642624] integrity: Loading X.509 certificate: UEFI:db
[    1.642634] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    1.642635] integrity: Loading X.509 certificate: UEFI:db
[    1.642644] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    1.644271] rtc_cmos 00:02: setting system clock to 2019-11-01T12:18:12 UTC (1572610692)
[    1.644897] Freeing unused kernel image memory: 1660K
[    1.702183] Write protecting the kernel read-only data: 16384k
[    1.702752] Freeing unused kernel image memory: 2036K
[    1.702981] Freeing unused kernel image memory: 540K
[    1.709337] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.709338] Run /init as init process
[    1.779607] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.779622] ACPI: Lid Switch [LID0]
[    1.779674] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    1.779683] ACPI: Power Button [PBTN]
[    1.779709] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[    1.779713] ACPI: Sleep Button [SBTN]
[    1.780082] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    1.780124] wmi_bus wmi_bus-PNP0C14:03: WQBC data block query control method not found
[    1.780125] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    1.787257] nvme nvme0: pci function 0000:6e:00.0
[    1.790724] ACPI: bus type USB registered
[    1.790741] usbcore: registered new interface driver usbfs
[    1.790747] usbcore: registered new interface driver hub
[    1.790774] usbcore: registered new device driver usb
[    1.791860] cryptd: max_cpu_qlen set to 1000
[    1.807154] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.807169] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.808263] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    1.808267] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.808660] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.808661] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.808662] usb usb1: Product: xHCI Host Controller
[    1.808663] usb usb1: Manufacturer: Linux 5.3.0-1-amd64 xhci-hcd
[    1.808664] usb usb1: SerialNumber: 0000:00:14.0
[    1.809652] AVX2 version of gcm_enc/dec engaged.
[    1.809652] AES CTR mode by8 optimization enabled
[    1.824205] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    1.824254] hub 1-0:1.0: USB hub found
[    1.824273] hub 1-0:1.0: 12 ports detected
[    1.847623] acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    1.847803] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.847806] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.847809] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.847853] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    1.847854] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.847855] usb usb2: Product: xHCI Host Controller
[    1.847856] usb usb2: Manufacturer: Linux 5.3.0-1-amd64 xhci-hcd
[    1.847856] usb usb2: SerialNumber: 0000:00:14.0
[    1.847938] hub 2-0:1.0: USB hub found
[    1.847948] hub 2-0:1.0: 6 ports detected
[    1.848171] usb: port power management may be unreliable
[    1.848594] xhci_hcd 0000:39:00.0: xHCI Host Controller
[    1.848597] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[    1.848770] [drm] VT-d active for gfx access
[    1.848771] checking generic (50000000 7f0000) vs hw (50000000 10000000)
[    1.848772] fb0: switching to inteldrmfb from EFI VGA
[    1.848812] Console: switching to colour dummy device 80x25
[    1.848831] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.849749] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[    1.849800] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.849800] [drm] Driver supports precise vblank timestamp query.
[    1.849997] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.849997] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.849998] usb usb3: Product: xHCI Host Controller
[    1.849998] usb usb3: Manufacturer: Linux 5.3.0-1-amd64 xhci-hcd
[    1.849999] usb usb3: SerialNumber: 0000:39:00.0
[    1.850203] hub 3-0:1.0: USB hub found
[    1.850209] hub 3-0:1.0: 2 ports detected
[    1.850418] xhci_hcd 0000:39:00.0: xHCI Host Controller
[    1.850420] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[    1.850421] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    1.850439] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    1.850440] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.850440] usb usb4: Product: xHCI Host Controller
[    1.850441] usb usb4: Manufacturer: Linux 5.3.0-1-amd64 xhci-hcd
[    1.850441] usb usb4: SerialNumber: 0000:39:00.0
[    1.850489] hub 4-0:1.0: USB hub found
[    1.850535] hub 4-0:1.0: 2 ports detected
[    1.850557] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.850592] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[    1.850744] xhci_hcd 0000:3f:00.0: xHCI Host Controller
[    1.850746] xhci_hcd 0000:3f:00.0: new USB bus registered, assigned bus number 5
[    1.852698] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    1.917419] xhci_hcd 0000:3f:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410
[    1.917509] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[    1.918107] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.918108] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.918109] usb usb5: Product: xHCI Host Controller
[    1.918109] usb usb5: Manufacturer: Linux 5.3.0-1-amd64 xhci-hcd
[    1.918110] usb usb5: SerialNumber: 0000:3f:00.0
[    1.918167] hub 5-0:1.0: USB hub found
[    1.918180] hub 5-0:1.0: 2 ports detected
[    1.918350] xhci_hcd 0000:3f:00.0: xHCI Host Controller
[    1.918353] xhci_hcd 0000:3f:00.0: new USB bus registered, assigned bus number 6
[    1.918354] xhci_hcd 0000:3f:00.0: Host supports USB 3.0 SuperSpeed
[    1.919140] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.919148] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    1.919148] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.919149] usb usb6: Product: xHCI Host Controller
[    1.919149] usb usb6: Manufacturer: Linux 5.3.0-1-amd64 xhci-hcd
[    1.919150] usb usb6: SerialNumber: 0000:3f:00.0
[    1.919267] hub 6-0:1.0: USB hub found
[    1.919280] hub 6-0:1.0: 2 ports detected
[    2.067433] nvme nvme0: 8/0/0 default/read/poll queues
[    2.075494]  nvme0n1: p1 p2 p3
[    2.182025] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[    2.264032] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    2.286655] usb 6-1: New USB device found, idVendor=0424, idProduct=5807, bcdDevice= 2.04
[    2.286657] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.286659] usb 6-1: Product: USB5807 Hub
[    2.286661] usb 6-1: Manufacturer: Microchip
[    2.323676] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.325031] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    2.336684] hub 6-1:1.0: USB hub found
[    2.337153] hub 6-1:1.0: 7 ports detected
[    2.338779] fbcon: i915drmfb (fb0) is primary device
[    2.346568] usb 1-5: New USB device found, idVendor=0c45, idProduct=6723, bcdDevice=80.08
[    2.346571] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.346573] usb 1-5: Product: Integrated_Webcam_HD
[    2.346575] usb 1-5: Manufacturer: CN09357G8LG0096MAD4KA01
[    2.474035] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    2.478029] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[    2.606025] tsc: Refined TSC clocksource calibration: 1991.997 MHz
[    2.606035] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d4bf570c, max_idle_ns: 881590425443 ns
[    2.606078] clocksource: Switched to clocksource tsc
[    2.606085] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734]
[    2.622947] usb 1-7: New USB device found, idVendor=0489, idProduct=e0a2, bcdDevice= 0.01
[    2.622950] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.633903] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..]
[    2.633910] psmouse serio1: synaptics: Your touchpad (PNP: DLL08af PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    2.689317] psmouse serio1: synaptics: Touchpad model: 1, fw: 9.16, id: 0x1e2a1, caps: 0xf00323/0x840300/0x12e800/0x500000, board id: 3038, fw id: 2767034
[    2.715489] usb 5-1: New USB device found, idVendor=0424, idProduct=2807, bcdDevice= 2.04
[    2.715492] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.715494] usb 5-1: Product: USB2807 Hub
[    2.715496] usb 5-1: Manufacturer: Microchip
[    2.724048] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.765769] hub 5-1:1.0: USB hub found
[    2.765934] hub 5-1:1.0: 7 ports detected
[    2.806943] usb 6-1.2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[    2.832483] usb 6-1.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.11
[    2.832487] usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    2.832489] usb 6-1.2: Product: USB 10/100/1000 LAN
[    2.832491] usb 6-1.2: Manufacturer: Realtek
[    2.832492] usb 6-1.2: SerialNumber: 000001000000
[    3.130267] usb 5-1.3: new low-speed USB device number 3 using xhci_hcd
[    3.285711] usb 5-1.3: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00
[    3.285715] usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.285718] usb 5-1.3: Product: Dell MS116 USB Optical Mouse
[    3.285720] usb 5-1.3: Manufacturer: PixArt
[    3.346492] hidraw: raw HID events driver (C) Jiri Kosina
[    3.349932] usbcore: registered new interface driver usbhid
[    3.349933] usbhid: USB HID core driver
[    3.350915] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3a:00.0/0000:3b:04.0/0000:3d:00.0/0000:3e:01.0/0000:3f:00.0/usb5/5-1/5-1.3/5-1.3:1.0/0003:413C:301A.0001/input/input7
[    3.351002] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:3f:00.0-1.3/input0
[    3.422158] usb 5-1.5: new high-speed USB device number 4 using xhci_hcd
[    3.447517] Console: switching to colour frame buffer device 240x67
[    3.469077] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    3.538073] device-mapper: uevent: version 1.0.3
[    3.538159] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[    3.623930] usb 5-1.5: New USB device found, idVendor=0bda, idProduct=4014, bcdDevice= 0.05
[    3.623933] usb 5-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    3.623935] usb 5-1.5: Product: USB Audio
[    3.623936] usb 5-1.5: Manufacturer: Generic
[    3.623938] usb 5-1.5: SerialNumber: 200901010001
[    3.758303] usb 5-1.6: new low-speed USB device number 5 using xhci_hcd
[    3.921535] usb 5-1.6: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.10
[    3.921541] usb 5-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    3.921544] usb 5-1.6: Product: Dell KB216 Wired Keyboard
[    4.016908] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3a:00.0/0000:3b:04.0/0000:3d:00.0/0000:3e:01.0/0000:3f:00.0/usb5/5-1/5-1.6/5-1.6:1.0/0003:413C:2113.0002/input/input8
[    4.074938] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:3f:00.0-1.6/input0
[    4.084757] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3a:00.0/0000:3b:04.0/0000:3d:00.0/0000:3e:01.0/0000:3f:00.0/usb5/5-1/5-1.6/5-1.6:1.1/0003:413C:2113.0003/input/input9
[    4.142581] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3a:00.0/0000:3b:04.0/0000:3d:00.0/0000:3e:01.0/0000:3f:00.0/usb5/5-1/5-1.6/5-1.6:1.1/0003:413C:2113.0003/input/input10
[    4.142993] hid-generic 0003:413C:2113.0003: input,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:3f:00.0-1.6/input1
[   13.773526] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[   13.775420] XFS (dm-0): Mounting V5 Filesystem
[   13.791297] XFS (dm-0): Ending clean mount
[   13.836555] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[   13.928002] systemd[1]: Inserted module 'autofs4'
[   14.015946] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   14.034215] systemd[1]: Detected architecture x86-64.
[   14.036152] systemd[1]: Set hostname to <hassler>.
[   14.036432] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[   14.106312] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[   14.154802] systemd[1]: /lib/systemd/system/pcscd.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly.
[   14.159190] systemd[1]: Listening on Journal Socket (/dev/log).
[   14.159393] systemd[1]: Listening on Journal Audit Socket.
[   14.159413] systemd[1]: Reached target User and Group Name Lookups.
[   14.159474] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   14.184762] lp: driver loaded but no devices found
[   14.187544] ppdev: user-space parallel port driver
[   14.252844] input: Intel HID events as /devices/platform/INT33D5:00/input/input11
[   14.253959] intel-hid INT33D5:00: platform supports 5 button array
[   14.253995] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input12
[   14.255610] ACPI: AC Adapter [AC] (on-line)
[   14.282436] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[   14.285809] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[   14.287740] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   14.290599] idma64 idma64.0: Found Intel integrated DMA 64-bit
[   14.291374] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   14.295143] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1)
[   14.312548] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[   14.312841] idma64 idma64.1: Found Intel integrated DMA 64-bit
[   14.327447] EFI Variables Facility v0.08 2004-May-17
[   14.327768] input: PC Speaker as /devices/platform/pcspkr/input/input13
[   14.329668] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   14.329914] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   14.329963] intel_rapl_common: Found RAPL domain package
[   14.329964] intel_rapl_common: Found RAPL domain dram
[   14.331334] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[   14.338735] mc: Linux media interface: v0.10
[   14.339526] usbcore: registered new interface driver r8152
[   14.345191] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[   14.345192] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   14.345193] RAPL PMU: hw unit of domain package 2^-14 Joules
[   14.345193] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   14.345193] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   14.345194] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   14.358804] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[   14.387362] XFS (nvme0n1p2): Mounting V5 Filesystem
[   14.388145] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[   14.412560] usbcore: registered new interface driver cdc_ether
[   14.423347] videodev: Linux video capture interface: v2.00
[   14.429274] intel_rapl_common: Found RAPL domain package
[   14.429275] intel_rapl_common: Found RAPL domain core
[   14.429275] intel_rapl_common: Found RAPL domain uncore
[   14.429276] intel_rapl_common: Found RAPL domain dram
[   14.460756] input: Dell WMI hotkeys as /devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input14
[   14.461101] pstore: Using crash dump compression: deflate
[   14.461114] pstore: Registered efi as persistent store backend
[   14.476631] battery: ACPI: Battery Slot [BAT0] (battery present)
[   14.522438] systemd-journald[520]: Received request to flush runtime journal from PID 1
[   14.536274] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   14.536609] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[   14.536849] iTCO_vendor_support: vendor-support=0
[   14.538299] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   14.538347] iTCO_wdt iTCO_wdt: can't request region for resource [mem 0x00c5fffc-0x00c5ffff]
[   14.538371] iTCO_wdt: probe of iTCO_wdt failed with error -16
[   14.540088] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6723)
[   14.544100] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   14.545192] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[   14.545192] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[   14.545193] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[   14.545194] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[   14.545227] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input15
[   14.545268] usbcore: registered new interface driver uvcvideo
[   14.545268] USB Video Class driver (1.1.1)
[   14.546849] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   14.570098] Bluetooth: Core ver 2.22
[   14.570112] NET: Registered protocol family 31
[   14.570112] Bluetooth: HCI device and connection manager initialized
[   14.570115] Bluetooth: HCI socket layer initialized
[   14.570116] Bluetooth: L2CAP socket layer initialized
[   14.570118] Bluetooth: SCO socket layer initialized
[   14.625655] usbcore: registered new interface driver btusb
[   14.629274] bluetooth hci0: firmware: direct-loading firmware qca/rampatch_usb_00000302.bin
[   14.629277] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[   14.629278] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[   14.683862] bluetooth hci0: firmware: direct-loading firmware qca/nvm_usb_00000302.bin
[   14.683865] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[   14.687969] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3271: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   14.687971] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.687972] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   14.687973] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   14.687973] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   14.687974] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[   14.687975] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1b
[   14.687976] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   14.759542] snd_hda_codec_generic hdaudioC0D2: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[   14.759543] snd_hda_codec_generic hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.759544] snd_hda_codec_generic hdaudioC0D2:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.759544] snd_hda_codec_generic hdaudioC0D2:    mono: mono_out=0x0
[   14.759545] snd_hda_codec_generic hdaudioC0D2:    dig-out=0x3/0x0
[   14.759545] snd_hda_codec_generic hdaudioC0D2:    inputs:
[   14.760751] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[   14.760790] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[   14.812648] i2c_hid i2c-DELL08AF:00: i2c-DELL08AF:00 supply vdd not found, using dummy regulator
[   14.812655] i2c_hid i2c-DELL08AF:00: i2c-DELL08AF:00 supply vddl not found, using dummy regulator
[   14.829442] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2)
[   14.829472] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[   14.829513] ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2)
[   14.833726] ath10k_pci 0000:02:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/firmware-6.bin
[   14.833730] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:143a
[   14.833731] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[   14.834069] ath10k_pci 0000:02:00.0: firmware ver RM.4.4.1.c2-00057-QCARMSWP-1 api 6 features wowlan,ignore-otp,no-4addr-pad,raw-mode crc32 e061250a
[   14.837577] input: DELL08AF:00 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-DELL08AF:00/0018:06CB:76AF.0004/input/input18
[   14.837657] input: DELL08AF:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-DELL08AF:00/0018:06CB:76AF.0004/input/input19
[   14.837700] hid-generic 0018:06CB:76AF.0004: input,hidraw3: I2C HID v1.00 Mouse [DELL08AF:00 06CB:76AF] on i2c-DELL08AF:00
[   14.851434] usb 6-1.2: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[   14.854554] XFS (nvme0n1p2): Ending clean mount
[   14.899223] ath10k_pci 0000:02:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/board-2.bin
[   14.899500] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 4ed3569e
[   14.959232] ath10k_pci 0000:02:00.0: UART prints enabled
[   14.974144] input: DELL08AF:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-DELL08AF:00/0018:06CB:76AF.0004/input/input22
[   14.974201] hid-multitouch 0018:06CB:76AF.0004: input,hidraw3: I2C HID v1.00 Mouse [DELL08AF:00 06CB:76AF] on i2c-DELL08AF:00
[   14.982690] audit: type=1400 audit(1572610705.833:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=764 comm="apparmor_parser"
[   14.982944] audit: type=1400 audit(1572610705.833:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=759 comm="apparmor_parser"
[   14.982946] audit: type=1400 audit(1572610705.833:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=759 comm="apparmor_parser"
[   14.982982] audit: type=1400 audit(1572610705.833:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=763 comm="apparmor_parser"
[   14.983019] audit: type=1400 audit(1572610705.833:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=758 comm="apparmor_parser"
[   14.983198] audit: type=1400 audit(1572610705.833:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=757 comm="apparmor_parser"
[   14.983200] audit: type=1400 audit(1572610705.833:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=757 comm="apparmor_parser"
[   14.983200] audit: type=1400 audit(1572610705.833:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=757 comm="apparmor_parser"
[   14.984024] audit: type=1400 audit(1572610705.833:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=761 comm="apparmor_parser"
[   14.984190] audit: type=1400 audit(1572610705.833:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=766 comm="apparmor_parser"
[   15.022960] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
[   15.214642] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.214642] Bluetooth: BNEP filters: protocol multicast
[   15.214645] Bluetooth: BNEP socket layer initialized
[   15.310747] ath10k_pci 0000:02:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[   15.415836] ath: EEPROM regdomain: 0x6c
[   15.415837] ath: EEPROM indicates we should expect a direct regpair map
[   15.415837] ath: Country alpha2 being used: 00
[   15.415838] ath: Regpair used: 0x6c
[   15.418069] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[   15.505468] usb 6-1.2: Dell TB16 Dock, disable RX aggregation
[   15.520626] r8152 6-1.2:1.0 (unnamed net_device) (uninitialized): Using pass-thru MAC addr 98:e7:43:a8:3c:db
[   15.636893] usbcore: registered new interface driver snd-usb-audio
[   15.642727] ath10k_pci 0000:02:00.0: UART prints enabled
[   15.706569] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
[   16.063147] r8152 6-1.2:1.0 eth0: v1.09.10
[   16.145732] thunderbolt 0000:05:00.0: 3: drom data crc32 mismatch (expected: 0xaf438340, got: 0xaf4383c0), continuing
[   16.149465] thunderbolt 0-3: new device found, vendor=0xd4 device=0xb051
[   16.149466] thunderbolt 0-3: Dell Dell Thunderbolt Cable
[   16.363501] ath10k_pci 0000:02:00.0: UART prints enabled
[   16.378624] fuse: init (API version 7.31)
[   16.427281] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
[   16.566608] thunderbolt 0-303: ignoring unnecessary extra entries in DROM
[   16.570678] thunderbolt 0-303: new device found, vendor=0xd4 device=0xb054
[   16.570679] thunderbolt 0-303: Dell Dell Thunderbolt Dock
[   16.781975] r8152 6-1.2:1.0 enx98e743a83cdb: renamed from eth0
[   17.732176] rfkill: input handler disabled
[   17.905084] mce: CPU4: Core temperature above threshold, cpu clock throttled (total events = 1)
[   17.905085] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[   17.905087] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
[   17.905088] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[   17.905089] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[   17.905090] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
[   17.905091] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[   17.905092] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
[   17.905093] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[   17.905097] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
[   18.145407] Bluetooth: RFCOMM TTY layer initialized
[   18.145413] Bluetooth: RFCOMM socket layer initialized
[   18.145415] Bluetooth: RFCOMM ver 1.11
[   19.223693] IPv6: ADDRCONF(NETDEV_CHANGE): enx98e743a83cdb: link becomes ready
[   19.224882] r8152 6-1.2:1.0 enx98e743a83cdb: carrier on
[   26.688471] wlp2s0: authenticate with 6c:f3:7f:10:93:48
[   26.766529] wlp2s0: send auth to 6c:f3:7f:10:93:48 (try 1/3)
[   26.774451] wlp2s0: authenticated
[   26.777958] wlp2s0: associate with 6c:f3:7f:10:93:48 (try 1/3)
[   26.781175] wlp2s0: RX AssocResp from 6c:f3:7f:10:93:48 (capab=0x411 status=0 aid=3)
[   26.832967] wlp2s0: associated
[   26.991665] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   43.130097] rfkill: input handler enabled
[   44.026360] wlp2s0: deauthenticating from 6c:f3:7f:10:93:48 by local choice (Reason: 3=DEAUTH_LEAVING)
[   45.095814] rfkill: input handler disabled
[   53.402378] rfkill: input handler enabled
[   54.733563] rfkill: input handler disabled
[  139.752819] PM: suspend entry (s2idle)
[  139.753919] Filesystems sync: 0.001 seconds
[  139.754235] (NULL device *): firmware: direct-loading firmware qca/nvm_usb_00000302.bin
[  139.754251] (NULL device *): firmware: direct-loading firmware qca/rampatch_usb_00000302.bin
[  139.754879] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[  139.754921] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  139.756608] OOM killer disabled.
[  139.756609] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[  139.757586] printk: Suspending console(s) (use no_console_suspend to debug)
[  139.965726] psmouse serio1: Failed to disable mouse on isa0060/serio1
[  150.530364] usb usb5: root hub lost power or was reset
[  150.530365] usb usb6: root hub lost power or was reset
[  150.723502] ath10k_pci 0000:02:00.0: UART prints enabled
[  150.788182] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
[  150.955648] usb 6-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[  151.172726] usb 5-1: reset high-speed USB device number 2 using xhci_hcd
[  151.509514] usb 6-1.2: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[  151.980691] usb 5-1.3: reset low-speed USB device number 3 using xhci_hcd
[  152.588838] usb 5-1.6: reset low-speed USB device number 5 using xhci_hcd
[  153.026451] usb 5-1.5: reset high-speed USB device number 4 using xhci_hcd
[  154.578785] OOM killer enabled.
[  154.578788] Restarting tasks ... done.
[  154.671809] PM: suspend exit
[  155.362025] IPv6: ADDRCONF(NETDEV_CHANGE): enx98e743a83cdb: link becomes ready
[  155.363594] r8152 6-1.2:1.0 enx98e743a83cdb: carrier on
[  156.614284] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x20270503
[  157.622232] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  158.626371] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  159.634102] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  161.678121] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  162.682272] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  163.694234] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  165.730142] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  166.734062] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  167.737908] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  169.782041] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  170.785827] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  171.790000] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  173.829896] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  174.833893] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  175.837849] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  177.873704] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  178.881771] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  179.885738] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  181.921643] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  182.925675] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  183.132176] PM: suspend entry (s2idle)
[  183.133798] Filesystems sync: 0.001 seconds
[  183.133968] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[  183.134108] (NULL device *): firmware: direct-loading firmware qca/nvm_usb_00000302.bin
[  183.134111] (NULL device *): firmware: direct-loading firmware qca/rampatch_usb_00000302.bin
[  183.134236] Freezing user space processes ... (elapsed 0.001 seconds) done.
[  183.136034] OOM killer disabled.
[  183.136034] Freezing remaining freezable tasks ... 
[  183.937677] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  185.973399] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  186.977389] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  187.981569] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  190.017506] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  190.731632] pcieport 0000:04:04.0: pciehp: Slot(4): Link Down
[  190.731640] pcieport 0000:04:04.0: pciehp: Slot(4): Card not present
[  190.731664] pcieport 0000:3e:04.0: Refused to change power state, currently in D3
[  190.732691] xhci_hcd 0000:3f:00.0: remove, state 1
[  190.732712] usb usb6: USB disconnect, device number 1
[  190.732718] usb 6-1: USB disconnect, device number 2
[  190.732724] usb 6-1.2: USB disconnect, device number 3
[  190.732953] xhci_hcd 0000:3f:00.0: xHCI host controller not responding, assume dead
[  190.763874] xhci_hcd 0000:3f:00.0: USB bus 6 deregistered
[  190.763902] xhci_hcd 0000:3f:00.0: remove, state 1
[  190.763918] usb usb5: USB disconnect, device number 1
[  190.763926] usb 5-1: USB disconnect, device number 2
[  190.763933] usb 5-1.3: USB disconnect, device number 3
[  190.765347] usb 5-1.5: USB disconnect, device number 4
[  190.767022] usb 5-1.6: USB disconnect, device number 5
[  190.771437] xhci_hcd 0000:3f:00.0: Host halt failed, -19
[  190.771445] xhci_hcd 0000:3f:00.0: Host not accessible, reset failed.
[  190.772400] xhci_hcd 0000:3f:00.0: USB bus 5 deregistered
[  190.773654] pcieport 0000:3b:01.0: Refused to change power state, currently in D3
[  190.774231] pci_bus 0000:3c: busn_res: [bus 3c] is released
[  190.774473] pci 0000:3b:01.0: Removing from iommu group 19
[  190.774712] pci 0000:3f:00.0: Removing from iommu group 19
[  190.774784] pci_bus 0000:3f: busn_res: [bus 3f] is released
[  190.774990] pci 0000:3e:01.0: Removing from iommu group 19
[  190.775345] pci_bus 0000:40: busn_res: [bus 40-6d] is released
[  190.775566] pci 0000:3e:04.0: Removing from iommu group 19
[  190.775624] pci_bus 0000:3e: busn_res: [bus 3e-6d] is released
[  190.775817] pci 0000:3d:00.0: Removing from iommu group 19
[  190.776158] pci_bus 0000:3d: busn_res: [bus 3d-6d] is released
[  190.776360] pci 0000:3b:04.0: Removing from iommu group 19
[  190.776692] pci_bus 0000:3b: busn_res: [bus 3b-6d] is released
[  190.776890] pci 0000:3a:00.0: Removing from iommu group 19
[  191.029202] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  192.041443] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  194.077394] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  195.081341] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  196.085350] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  196.121810] (elapsed 12.986 seconds) done.
[  196.121823] printk: Suspending console(s) (use no_console_suspend to debug)
[  196.781066] thunderbolt 0-303: device disconnected
[  196.781161] thunderbolt 0-3: device disconnected
[  208.856314] typec port1-partner: parent port1 should not be sleeping
[  209.301222] usb usb3: root hub lost power or was reset
[  209.301224] usb usb4: root hub lost power or was reset
[  209.494652] ath10k_pci 0000:02:00.0: UART prints enabled
[  209.558420] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
[  210.457355] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  211.469618] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  212.477285] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  213.489562] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  214.525526] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  215.533502] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  216.541473] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  217.549454] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  218.585074] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  219.597378] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  220.605349] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  221.613317] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  222.649292] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  223.657263] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  224.664904] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  225.673212] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  226.709187] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  227.717153] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  228.725125] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  229.733073] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  230.769061] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  231.777025] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  232.784988] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  233.792958] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  234.828927] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  235.836896] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  236.844867] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  237.852862] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  238.888815] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  239.896776] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  240.904761] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  241.912736] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  242.948688] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  243.956668] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  244.964633] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  245.972617] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  247.008597] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  248.016554] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  249.024504] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  250.032496] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  251.068452] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370740
[  252.076434] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370740
[  253.084397] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270d00
[  253.084408] snd_hda_codec_generic hdaudioC0D2: Unable to sync register 0x2f0d00. -11
[  254.092358] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270d00
[  254.092368] snd_hda_codec_generic hdaudioC0D2: Unable to sync register 0x2f0d00. -11
[  255.100329] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x203f0900
[  256.370030] pcieport 0000:04:04.0: pciehp: Slot(4): Card present
[  256.504332] pci 0000:3a:00.0: [8086:1578] type 01 class 0x060400
[  256.504485] pci 0000:3a:00.0: enabling Extended Tags
[  256.504764] pci 0000:3a:00.0: supports D1 D2
[  256.504767] pci 0000:3a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[  256.504905] pci 0000:3a:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:04:04.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
[  256.505073] pci 0000:3a:00.0: Adding to iommu group 19
[  256.505190] pcieport 0000:04:04.0: ASPM: current common clock configuration is broken, reconfiguring
[  256.516344] pci 0000:3a:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[  256.516608] pci 0000:3b:01.0: [8086:1578] type 01 class 0x060400
[  256.516767] pci 0000:3b:01.0: enabling Extended Tags
[  256.517040] pci 0000:3b:01.0: supports D1 D2
[  256.517043] pci 0000:3b:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[  256.517295] pci 0000:3b:01.0: Adding to iommu group 19
[  256.517390] pci 0000:3b:04.0: [8086:1578] type 01 class 0x060400
[  256.517543] pci 0000:3b:04.0: enabling Extended Tags
[  256.517779] pci 0000:3b:04.0: supports D1 D2
[  256.517782] pci 0000:3b:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[  256.517993] pci 0000:3b:04.0: Adding to iommu group 19
[  256.518117] pci 0000:3a:00.0: PCI bridge to [bus 3b-6d]
[  256.518136] pci 0000:3a:00.0:   bridge window [io  0x0000-0x0fff]
[  256.518145] pci 0000:3a:00.0:   bridge window [mem 0x00000000-0x000fffff]
[  256.518161] pci 0000:3a:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[  256.518167] pci 0000:3b:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[  256.518186] pci 0000:3b:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[  256.518345] pci 0000:3b:01.0: PCI bridge to [bus 3c-6d]
[  256.518360] pci 0000:3b:01.0:   bridge window [io  0x0000-0x0fff]
[  256.518370] pci 0000:3b:01.0:   bridge window [mem 0x00000000-0x000fffff]
[  256.518385] pci 0000:3b:01.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[  256.518390] pci_bus 0000:3c: busn_res: [bus 3c-6d] end is updated to 3c
[  256.518536] pci 0000:3b:04.0: PCI bridge to [bus 3d-6d]
[  256.518551] pci 0000:3b:04.0:   bridge window [io  0x0000-0x0fff]
[  256.518560] pci 0000:3b:04.0:   bridge window [mem 0x00000000-0x000fffff]
[  256.518575] pci 0000:3b:04.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[  256.518578] pci_bus 0000:3d: busn_res: [bus 3d-6d] end is updated to 6d
[  256.518588] pci_bus 0000:3b: busn_res: [bus 3b-6d] end is updated to 6d
[  256.518603] pci 0000:3b:04.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 3d-6d] add_size 100000 add_align 100000
[  256.518607] pci 0000:3b:04.0: bridge window [mem 0x00100000-0x001fffff] to [bus 3d-6d] add_size 100000 add_align 100000
[  256.518613] pci 0000:3a:00.0: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 3b-6d] add_size 100000 add_align 100000
[  256.518617] pci 0000:3a:00.0: bridge window [mem 0x00100000-0x002fffff] to [bus 3b-6d] add_size 100000 add_align 100000
[  256.518631] pci 0000:3a:00.0: BAR 14: assigned [mem 0xc4000000-0xd9ffffff]
[  256.518636] pci 0000:3a:00.0: BAR 15: assigned [mem 0x80000000-0xa9ffffff 64bit pref]
[  256.518639] pci 0000:3a:00.0: BAR 13: assigned [io  0x5000-0x6fff]
[  256.518648] pci 0000:3b:01.0: BAR 14: assigned [mem 0xc4000000-0xc40fffff]
[  256.518653] pci 0000:3b:01.0: BAR 15: assigned [mem 0x80000000-0x800fffff 64bit pref]
[  256.518656] pci 0000:3b:04.0: BAR 14: assigned [mem 0xc4100000-0xd9ffffff]
[  256.518660] pci 0000:3b:04.0: BAR 15: assigned [mem 0x80100000-0xa9ffffff 64bit pref]
[  256.518663] pci 0000:3b:01.0: BAR 13: assigned [io  0x5000-0x5fff]
[  256.518666] pci 0000:3b:04.0: BAR 13: assigned [io  0x6000-0x6fff]
[  256.518670] pci 0000:3b:01.0: PCI bridge to [bus 3c]
[  256.518677] pci 0000:3b:01.0:   bridge window [io  0x5000-0x5fff]
[  256.518690] pci 0000:3b:01.0:   bridge window [mem 0xc4000000-0xc40fffff]
[  256.518699] pci 0000:3b:01.0:   bridge window [mem 0x80000000-0x800fffff 64bit pref]
[  256.518714] pci 0000:3b:04.0: PCI bridge to [bus 3d-6d]
[  256.518720] pci 0000:3b:04.0:   bridge window [io  0x6000-0x6fff]
[  256.518732] pci 0000:3b:04.0:   bridge window [mem 0xc4100000-0xd9ffffff]
[  256.518740] pci 0000:3b:04.0:   bridge window [mem 0x80100000-0xa9ffffff 64bit pref]
[  256.518755] pci 0000:3a:00.0: PCI bridge to [bus 3b-6d]
[  256.518761] pci 0000:3a:00.0:   bridge window [io  0x5000-0x6fff]
[  256.518773] pci 0000:3a:00.0:   bridge window [mem 0xc4000000-0xd9ffffff]
[  256.518782] pci 0000:3a:00.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[  256.518797] pcieport 0000:04:04.0: PCI bridge to [bus 3a-6d]
[  256.518801] pcieport 0000:04:04.0:   bridge window [io  0x5000-0x7fff]
[  256.518810] pcieport 0000:04:04.0:   bridge window [mem 0xc4000000-0xd9ffffff]
[  256.518816] pcieport 0000:04:04.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[  257.073049] OOM killer enabled.
[  257.073051] Restarting tasks ... 
[  257.073649] pci 0000:3b:01.0: PCI bridge to [bus 3c]
[  257.073661] pci 0000:3b:01.0:   bridge window [io  0x5000-0x5fff]
[  257.073675] pci 0000:3b:01.0:   bridge window [mem 0xc4000000-0xc40fffff]
[  257.073685] pci 0000:3b:01.0:   bridge window [mem 0x80000000-0x800fffff 64bit pref]
[  257.073702] pci 0000:3b:04.0: PCI bridge to [bus 3d-6d]
[  257.073711] pci 0000:3b:04.0:   bridge window [io  0x6000-0x6fff]
[  257.073726] pci 0000:3b:04.0:   bridge window [mem 0xc4100000-0xd9ffffff]
[  257.073742] pci 0000:3b:04.0:   bridge window [mem 0x80100000-0xa9ffffff 64bit pref]
[  257.073761] pci 0000:3a:00.0: PCI bridge to [bus 3b-6d]
[  257.073768] pci 0000:3a:00.0:   bridge window [io  0x5000-0x6fff]
[  257.073783] pci 0000:3a:00.0:   bridge window [mem 0xc4000000-0xd9ffffff]
[  257.073799] pci 0000:3a:00.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[  257.074285] pci 0000:3b:01.0: PCI bridge to [bus 3c]
[  257.074293] pci 0000:3b:01.0:   bridge window [io  0x5000-0x5fff]
[  257.074308] pci 0000:3b:01.0:   bridge window [mem 0xc4000000-0xc40fffff]
[  257.074319] pci 0000:3b:01.0:   bridge window [mem 0x80000000-0x800fffff 64bit pref]
[  257.074337] pci 0000:3b:04.0: PCI bridge to [bus 3d-6d]
[  257.074344] pci 0000:3b:04.0:   bridge window [io  0x6000-0x6fff]
[  257.074358] pci 0000:3b:04.0:   bridge window [mem 0xc4100000-0xd9ffffff]
[  257.074367] pci 0000:3b:04.0:   bridge window [mem 0x80100000-0xa9ffffff 64bit pref]
[  257.074383] pci 0000:3a:00.0: PCI bridge to [bus 3b-6d]
[  257.074389] pci 0000:3a:00.0:   bridge window [io  0x5000-0x6fff]
[  257.074403] pci 0000:3a:00.0:   bridge window [mem 0xc4000000-0xd9ffffff]
[  257.074414] pci 0000:3a:00.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[  257.077428] done.
[  257.220843] PM: suspend exit
[  257.480391] pcieport 0000:3a:00.0: enabling device (0000 -> 0003)
[  257.480950] pcieport 0000:3b:01.0: enabling device (0000 -> 0003)
[  257.481511] pcieport 0000:3b:04.0: enabling device (0000 -> 0003)
[  257.481894] pcieport 0000:3b:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[  257.482201] pcieport 0000:3b:04.0: pciehp: Slot(4-1): Card present
[  257.482205] pcieport 0000:3b:04.0: pciehp: Slot(4-1): Link Up
[  257.616117] pci 0000:3d:00.0: [8086:1578] type 01 class 0x060400
[  257.616327] pci 0000:3d:00.0: enabling Extended Tags
[  257.616692] pci 0000:3d:00.0: supports D1 D2
[  257.616695] pci 0000:3d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[  257.616898] pci 0000:3d:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:04:04.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
[  257.617077] pci 0000:3d:00.0: Adding to iommu group 19
[  257.617328] pci 0000:3d:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[  257.617591] pci 0000:3e:01.0: [8086:1578] type 01 class 0x060400
[  257.617805] pci 0000:3e:01.0: enabling Extended Tags
[  257.618126] pci 0000:3e:01.0: supports D1 D2
[  257.618129] pci 0000:3e:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[  257.618415] pci 0000:3e:01.0: Adding to iommu group 19
[  257.618517] pci 0000:3e:04.0: [8086:1578] type 01 class 0x060400
[  257.618729] pci 0000:3e:04.0: enabling Extended Tags
[  257.619050] pci 0000:3e:04.0: supports D1 D2
[  257.619053] pci 0000:3e:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[  257.619340] pci 0000:3e:04.0: Adding to iommu group 19
[  257.619502] pci 0000:3d:00.0: PCI bridge to [bus 3e-6d]
[  257.619526] pci 0000:3d:00.0:   bridge window [io  0x0000-0x0fff]
[  257.619538] pci 0000:3d:00.0:   bridge window [mem 0x00000000-0x000fffff]
[  257.619558] pci 0000:3d:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[  257.619566] pci 0000:3e:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[  257.619591] pci 0000:3e:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[  257.619850] pci 0000:3f:00.0: [1b21:1142] type 00 class 0x0c0330
[  257.619997] pci 0000:3f:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[  257.620457] pci 0000:3f:00.0: PME# supported from D3cold
[  257.620762] pci 0000:3f:00.0: Adding to iommu group 19
[  257.620982] pci 0000:3e:01.0: PCI bridge to [bus 3f-6d]
[  257.621006] pci 0000:3e:01.0:   bridge window [io  0x0000-0x0fff]
[  257.621020] pci 0000:3e:01.0:   bridge window [mem 0x00000000-0x000fffff]
[  257.621045] pci 0000:3e:01.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[  257.621053] pci_bus 0000:3f: busn_res: [bus 3f-6d] end is updated to 3f
[  257.621310] pci 0000:3e:04.0: PCI bridge to [bus 40-6d]
[  257.621333] pci 0000:3e:04.0:   bridge window [io  0x0000-0x0fff]
[  257.621347] pci 0000:3e:04.0:   bridge window [mem 0x00000000-0x000fffff]
[  257.621370] pci 0000:3e:04.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[  257.621376] pci_bus 0000:40: busn_res: [bus 40-6d] end is updated to 6d
[  257.621392] pci_bus 0000:3e: busn_res: [bus 3e-6d] end is updated to 6d
[  257.621415] pci 0000:3e:04.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 40-6d] add_size 100000 add_align 100000
[  257.621422] pci 0000:3e:04.0: bridge window [mem 0x00100000-0x001fffff] to [bus 40-6d] add_size 100000 add_align 100000
[  257.621431] pci 0000:3d:00.0: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 3e-6d] add_size 100000 add_align 100000
[  257.621438] pci 0000:3d:00.0: bridge window [mem 0x00100000-0x002fffff] to [bus 3e-6d] add_size 100000 add_align 100000
[  257.621457] pci 0000:3d:00.0: BAR 14: assigned [mem 0xc4100000-0xd9ffffff]
[  257.621464] pci 0000:3d:00.0: BAR 15: assigned [mem 0x80100000-0xa9ffffff 64bit pref]
[  257.621471] pci 0000:3d:00.0: BAR 13: no space for [io  size 0x2000]
[  257.621475] pci 0000:3d:00.0: BAR 13: failed to assign [io  size 0x2000]
[  257.621482] pci 0000:3d:00.0: BAR 13: no space for [io  size 0x2000]
[  257.621486] pci 0000:3d:00.0: BAR 13: failed to assign [io  size 0x2000]
[  257.621498] pci 0000:3e:01.0: BAR 14: assigned [mem 0xc4100000-0xc41fffff]
[  257.621505] pci 0000:3e:01.0: BAR 15: assigned [mem 0x80100000-0x801fffff 64bit pref]
[  257.621511] pci 0000:3e:04.0: BAR 14: assigned [mem 0xc4200000-0xd9ffffff]
[  257.621517] pci 0000:3e:04.0: BAR 15: assigned [mem 0x80200000-0xa9ffffff 64bit pref]
[  257.621521] pci 0000:3e:01.0: BAR 13: no space for [io  size 0x1000]
[  257.621526] pci 0000:3e:01.0: BAR 13: failed to assign [io  size 0x1000]
[  257.621530] pci 0000:3e:04.0: BAR 13: no space for [io  size 0x1000]
[  257.621534] pci 0000:3e:04.0: BAR 13: failed to assign [io  size 0x1000]
[  257.621541] pci 0000:3e:01.0: BAR 13: no space for [io  size 0x1000]
[  257.621545] pci 0000:3e:01.0: BAR 13: failed to assign [io  size 0x1000]
[  257.621549] pci 0000:3e:04.0: BAR 13: no space for [io  size 0x1000]
[  257.621553] pci 0000:3e:04.0: BAR 13: failed to assign [io  size 0x1000]
[  257.621561] pci 0000:3f:00.0: BAR 0: assigned [mem 0xc4100000-0xc4107fff 64bit]
[  257.621607] pci 0000:3e:01.0: PCI bridge to [bus 3f]
[  257.621626] pci 0000:3e:01.0:   bridge window [mem 0xc4100000-0xc41fffff]
[  257.621640] pci 0000:3e:01.0:   bridge window [mem 0x80100000-0x801fffff 64bit pref]
[  257.621663] pci 0000:3e:04.0: PCI bridge to [bus 40-6d]
[  257.621682] pci 0000:3e:04.0:   bridge window [mem 0xc4200000-0xd9ffffff]
[  257.621695] pci 0000:3e:04.0:   bridge window [mem 0x80200000-0xa9ffffff 64bit pref]
[  257.621717] pci 0000:3d:00.0: PCI bridge to [bus 3e-6d]
[  257.621735] pci 0000:3d:00.0:   bridge window [mem 0xc4100000-0xd9ffffff]
[  257.621748] pci 0000:3d:00.0:   bridge window [mem 0x80100000-0xa9ffffff 64bit pref]
[  257.621771] pcieport 0000:3b:04.0: PCI bridge to [bus 3d-6d]
[  257.621779] pcieport 0000:3b:04.0:   bridge window [io  0x6000-0x6fff]
[  257.621793] pcieport 0000:3b:04.0:   bridge window [mem 0xc4100000-0xd9ffffff]
[  257.621805] pcieport 0000:3b:04.0:   bridge window [mem 0x80100000-0xa9ffffff 64bit pref]
[  257.621820] PCI: No. 2 try to assign unassigned res
[  257.621827] pcieport 0000:3b:04.0: resource 13 [io  0x6000-0x6fff] released
[  257.621831] pcieport 0000:3b:04.0: PCI bridge to [bus 3d-6d]
[  257.621860] pcieport 0000:3b:04.0: BAR 13: no space for [io  size 0x2000]
[  257.621865] pcieport 0000:3b:04.0: BAR 13: failed to assign [io  size 0x2000]
[  257.621870] pci 0000:3d:00.0: BAR 13: no space for [io  size 0x2000]
[  257.621874] pci 0000:3d:00.0: BAR 13: failed to assign [io  size 0x2000]
[  257.621879] pci 0000:3e:01.0: BAR 13: no space for [io  size 0x1000]
[  257.621882] pci 0000:3e:01.0: BAR 13: failed to assign [io  size 0x1000]
[  257.621886] pci 0000:3e:04.0: BAR 13: no space for [io  size 0x1000]
[  257.621890] pci 0000:3e:04.0: BAR 13: failed to assign [io  size 0x1000]
[  257.621895] pci 0000:3e:01.0: PCI bridge to [bus 3f]
[  257.621915] pci 0000:3e:01.0:   bridge window [mem 0xc4100000-0xc41fffff]
[  257.621928] pci 0000:3e:01.0:   bridge window [mem 0x80100000-0x801fffff 64bit pref]
[  257.621951] pci 0000:3e:04.0: PCI bridge to [bus 40-6d]
[  257.621970] pci 0000:3e:04.0:   bridge window [mem 0xc4200000-0xd9ffffff]
[  257.621983] pci 0000:3e:04.0:   bridge window [mem 0x80200000-0xa9ffffff 64bit pref]
[  257.622006] pci 0000:3d:00.0: PCI bridge to [bus 3e-6d]
[  257.622023] pci 0000:3d:00.0:   bridge window [mem 0xc4100000-0xd9ffffff]
[  257.622037] pci 0000:3d:00.0:   bridge window [mem 0x80100000-0xa9ffffff 64bit pref]
[  257.622059] pcieport 0000:3b:04.0: PCI bridge to [bus 3d-6d]
[  257.622073] pcieport 0000:3b:04.0:   bridge window [mem 0xc4100000-0xd9ffffff]
[  257.622084] pcieport 0000:3b:04.0:   bridge window [mem 0x80100000-0xa9ffffff 64bit pref]
[  257.622185] pcieport 0000:3d:00.0: enabling device (0000 -> 0002)
[  257.622869] pcieport 0000:3e:01.0: enabling device (0000 -> 0002)
[  257.623687] pcieport 0000:3e:04.0: enabling device (0000 -> 0002)
[  257.624221] pcieport 0000:3e:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[  257.624832] pci 0000:3f:00.0: enabling device (0000 -> 0002)
[  257.625692] xhci_hcd 0000:3f:00.0: xHCI Host Controller
[  257.625710] xhci_hcd 0000:3f:00.0: new USB bus registered, assigned bus number 5
[  257.692602] xhci_hcd 0000:3f:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410
[  257.693065] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[  257.693066] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  257.693067] usb usb5: Product: xHCI Host Controller
[  257.693067] usb usb5: Manufacturer: Linux 5.3.0-1-amd64 xhci-hcd
[  257.693068] usb usb5: SerialNumber: 0000:3f:00.0
[  257.693151] hub 5-0:1.0: USB hub found
[  257.693164] hub 5-0:1.0: 2 ports detected
[  257.693319] xhci_hcd 0000:3f:00.0: xHCI Host Controller
[  257.693321] xhci_hcd 0000:3f:00.0: new USB bus registered, assigned bus number 6
[  257.693324] xhci_hcd 0000:3f:00.0: Host supports USB 3.0 SuperSpeed
[  257.694103] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[  257.694113] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[  257.694114] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  257.694115] usb usb6: Product: xHCI Host Controller
[  257.694115] usb usb6: Manufacturer: Linux 5.3.0-1-amd64 xhci-hcd
[  257.694116] usb usb6: SerialNumber: 0000:3f:00.0
[  257.694168] hub 6-0:1.0: USB hub found
[  257.694180] hub 6-0:1.0: 2 ports detected
[  258.099921] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[  258.341066] usb 5-1: New USB device found, idVendor=0424, idProduct=2807, bcdDevice= 2.04
[  258.341068] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  258.341070] usb 5-1: Product: USB2807 Hub
[  258.341071] usb 5-1: Manufacturer: Microchip
[  258.391103] hub 5-1:1.0: USB hub found
[  258.391191] hub 5-1:1.0: 7 ports detected
[  258.477877] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[  258.504247] usb 6-1: New USB device found, idVendor=0424, idProduct=5807, bcdDevice= 2.04
[  258.504250] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  258.504251] usb 6-1: Product: USB5807 Hub
[  258.504253] usb 6-1: Manufacturer: Microchip
[  258.554304] hub 6-1:1.0: USB hub found
[  258.554738] hub 6-1:1.0: 7 ports detected
[  258.751879] usb 5-1.3: new low-speed USB device number 3 using xhci_hcd
[  258.870547] thunderbolt 0000:05:00.0: 3: drom data crc32 mismatch (expected: 0xaf438340, got: 0xaf4383c0), continuing
[  258.874354] thunderbolt 0-3: new device found, vendor=0xd4 device=0xb051
[  258.874355] thunderbolt 0-3: Dell Dell Thunderbolt Cable
[  258.902974] usb 5-1.3: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00
[  258.902975] usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  258.902976] usb 5-1.3: Product: Dell MS116 USB Optical Mouse
[  258.902991] usb 5-1.3: Manufacturer: PixArt
[  258.955837] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3a:00.0/0000:3b:04.0/0000:3d:00.0/0000:3e:01.0/0000:3f:00.0/usb5/5-1/5-1.3/5-1.3:1.0/0003:413C:301A.0005/input/input28
[  258.956067] hid-generic 0003:413C:301A.0005: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:3f:00.0-1.3/input0
[  258.989834] usb 6-1.2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[  259.014116] usb 6-1.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.11
[  259.014117] usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[  259.014118] usb 6-1.2: Product: USB 10/100/1000 LAN
[  259.014118] usb 6-1.2: Manufacturer: Realtek
[  259.014119] usb 6-1.2: SerialNumber: 000001000000
[  259.087864] usb 5-1.5: new high-speed USB device number 4 using xhci_hcd
[  259.115868] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  259.297203] usb 5-1.5: New USB device found, idVendor=0bda, idProduct=4014, bcdDevice= 0.05
[  259.297204] usb 5-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[  259.297205] usb 5-1.5: Product: USB Audio
[  259.297205] usb 5-1.5: Manufacturer: Generic
[  259.297206] usb 5-1.5: SerialNumber: 200901010001
[  259.298482] thunderbolt 0-303: new device found, vendor=0xd4 device=0xb054
[  259.298483] thunderbolt 0-303: Dell Dell Thunderbolt Dock
[  259.391541] usb 6-1.2: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[  260.123955] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  260.204105] usb 6-1.2: Dell TB16 Dock, disable RX aggregation
[  260.219361] r8152 6-1.2:1.0 (unnamed net_device) (uninitialized): Using pass-thru MAC addr 98:e7:43:a8:3c:db
[  260.263365] r8152 6-1.2:1.0 eth0: v1.09.10
[  261.382435] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  261.393874] r8152 6-1.2:1.0 enx98e743a83cdb: renamed from eth0
[  261.571891] usb 5-1.6: new low-speed USB device number 5 using xhci_hcd
[  261.730373] usb 5-1.6: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.10
[  261.730375] usb 5-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[  261.730376] usb 5-1.6: Product: Dell KB216 Wired Keyboard
[  261.823576] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3a:00.0/0000:3b:04.0/0000:3d:00.0/0000:3e:01.0/0000:3f:00.0/usb5/5-1/5-1.6/5-1.6:1.0/0003:413C:2113.0006/input/input29
[  261.880675] hid-generic 0003:413C:2113.0006: input,hidraw1: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:3f:00.0-1.6/input0
[  261.890074] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3a:00.0/0000:3b:04.0/0000:3d:00.0/0000:3e:01.0/0000:3f:00.0/usb5/5-1/5-1.6/5-1.6:1.1/0003:413C:2113.0007/input/input30
[  261.948000] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3a:00.0/0000:3b:04.0/0000:3d:00.0/0000:3e:01.0/0000:3f:00.0/usb5/5-1/5-1.6/5-1.6:1.1/0003:413C:2113.0007/input/input31
[  261.948186] hid-generic 0003:413C:2113.0007: input,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:3f:00.0-1.6/input1
[  263.435818] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  263.907129] IPv6: ADDRCONF(NETDEV_CHANGE): enx98e743a83cdb: link becomes ready
[  263.908382] r8152 6-1.2:1.0 enx98e743a83cdb: carrier on
[  264.291174] retire_capture_urb: 10 callbacks suppressed
[  264.447842] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  264.575791] usb 5-1.6: reset low-speed USB device number 5 using xhci_hcd
[  265.459820] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  267.503891] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  268.515847] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  269.519799] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  271.555788] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  272.559797] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  273.563735] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  275.611592] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  276.615660] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  277.623529] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  279.663562] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  280.667493] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  281.671289] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  283.715399] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  284.719221] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  285.731333] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  287.771102] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  288.783202] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  289.795161] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  291.839182] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  292.843156] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  293.850945] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  295.902868] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  296.914790] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  297.926918] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  315.995307] rfkill: input handler enabled
[  317.229742] rfkill: input handler disabled
[  318.681836] retire_capture_urb: 199 callbacks suppressed
[  319.150235] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  320.154270] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  321.166142] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  322.178124] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  323.218185] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  324.117626] retire_capture_urb: 43 callbacks suppressed
[  324.226153] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  325.238036] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  326.249939] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  327.289965] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  328.301845] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  329.305933] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  329.353294] retire_capture_urb: 19 callbacks suppressed
[  330.317847] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  331.357872] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  332.361803] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  333.373936] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  334.385785] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  334.406149] retire_capture_urb: 56 callbacks suppressed
[  335.425760] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  335.613031] usb 5-1.3: reset low-speed USB device number 3 using xhci_hcd
[  336.429630] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  337.441631] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  338.445659] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  339.485763] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  339.684063] retire_capture_urb: 50 callbacks suppressed
[  340.497711] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  341.509621] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  342.521515] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  343.557504] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  344.569492] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  344.693874] retire_capture_urb: 54 callbacks suppressed
[  345.573581] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  346.585368] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  347.621375] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  348.625326] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  349.629349] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  349.745528] retire_capture_urb: 23 callbacks suppressed
[  350.641292] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  351.673266] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  351.896304] usb 5-1.3: reset low-speed USB device number 3 using xhci_hcd
[  352.677177] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  353.681146] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  354.689194] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  354.865157] retire_capture_urb: 106 callbacks suppressed
[  355.725242] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20170500
[  356.737271] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270500
[  357.749420] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370500
[  358.761308] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  359.801306] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370740
[  360.316738] retire_capture_urb: 29 callbacks suppressed
[  360.805306] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370740
[  361.817380] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270d00
[  361.817398] snd_hda_codec_generic hdaudioC0D2: Unable to sync register 0x2f0d00. -11
[  362.829332] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270d00
[  362.829344] snd_hda_codec_generic hdaudioC0D2: Unable to sync register 0x2f0d00. -11
[  363.841412] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x203f0900
[  366.989498] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  367.993496] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  368.997490] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  371.037392] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  372.041452] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  373.045439] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  375.081425] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  376.085386] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  377.093380] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  379.129338] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  380.133310] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  381.141306] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  383.189134] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  384.197187] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  385.201069] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  387.241167] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  388.245148] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  389.249137] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  391.301066] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  392.305072] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  393.308982] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  395.352975] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  396.356940] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  397.360950] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  399.396853] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  400.400844] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  401.404726] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
[  403.440785] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
[  404.444755] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
[  405.448735] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-04 13:13 USB devices on Dell TB16 dock stop working after resuming Paul Menzel
@ 2019-11-04 14:24 ` Mika Westerberg
  2019-11-04 14:44   ` Mika Westerberg
  0 siblings, 1 reply; 34+ messages in thread
From: Mika Westerberg @ 2019-11-04 14:24 UTC (permalink / raw)
  To: Paul Menzel
  Cc: Andreas Noever, Michael Jamet, Yehezkel Bernat,
	Christian Kellner, Linux Kernel Mailing List, Mario Limonciello

Hi,

On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
> Dear Linux folks,
> 
> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
> suspending the system, and resuming with Dell’s Thunderbolt TB16
> dock connected, the USB input devices, keyboard and mouse,
> connected to the TB16 stop working. They work for a few seconds
> (mouse cursor can be moved), but then stop working. The laptop
> keyboard and touchpad still works fine. All firmware is up-to-date
> according to `fwupdmgr`.

What are the exact steps to reproduce? Just "echo mem >
/sys/power/state" and then resume by pressing power button?

> [  139.752819] PM: suspend entry (s2idle)
> [  139.753919] Filesystems sync: 0.001 seconds
> [  139.754235] (NULL device *): firmware: direct-loading firmware qca/nvm_usb_00000302.bin
> [  139.754251] (NULL device *): firmware: direct-loading firmware qca/rampatch_usb_00000302.bin
> [  139.754879] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
> [  139.754921] Freezing user space processes ... (elapsed 0.001 seconds) done.
> [  139.756608] OOM killer disabled.
> [  139.756609] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
> [  139.757586] printk: Suspending console(s) (use no_console_suspend to debug)
> [  139.965726] psmouse serio1: Failed to disable mouse on isa0060/serio1
> [  150.530364] usb usb5: root hub lost power or was reset
> [  150.530365] usb usb6: root hub lost power or was reset
> [  150.723502] ath10k_pci 0000:02:00.0: UART prints enabled
> [  150.788182] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
> [  150.955648] usb 6-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
> [  151.172726] usb 5-1: reset high-speed USB device number 2 using xhci_hcd
> [  151.509514] usb 6-1.2: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
> [  151.980691] usb 5-1.3: reset low-speed USB device number 3 using xhci_hcd
> [  152.588838] usb 5-1.6: reset low-speed USB device number 5 using xhci_hcd
> [  153.026451] usb 5-1.5: reset high-speed USB device number 4 using xhci_hcd
> [  154.578785] OOM killer enabled.
> [  154.578788] Restarting tasks ... done.
> [  154.671809] PM: suspend exit

The first suspend/resume cycle seems to be fine with the exception of
the HDA issue below.

> [  155.362025] IPv6: ADDRCONF(NETDEV_CHANGE): enx98e743a83cdb: link becomes ready
> [  155.363594] r8152 6-1.2:1.0 enx98e743a83cdb: carrier on
> [  156.614284] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x20270503
> [  157.622232] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
> [  158.626371] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
> [  159.634102] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
> [  161.678121] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
> [  162.682272] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
> [  163.694234] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
> [  165.730142] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
> [  166.734062] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
> [  167.737908] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
> [  169.782041] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
> [  170.785827] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
> [  171.790000] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
> [  173.829896] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
> [  174.833893] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
> [  175.837849] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
> [  177.873704] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
> [  178.881771] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
> [  179.885738] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
> [  181.921643] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
> [  182.925675] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503

The second suspend/resume cycle seems to have more issues:

> [  183.132176] PM: suspend entry (s2idle)
> [  183.133798] Filesystems sync: 0.001 seconds
> [  183.133968] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
> [  183.134108] (NULL device *): firmware: direct-loading firmware qca/nvm_usb_00000302.bin
> [  183.134111] (NULL device *): firmware: direct-loading firmware qca/rampatch_usb_00000302.bin
> [  183.134236] Freezing user space processes ... (elapsed 0.001 seconds) done.
> [  183.136034] OOM killer disabled.
> [  183.136034] Freezing remaining freezable tasks ... 
> [  183.937677] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
> [  185.973399] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
> [  186.977389] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
> [  187.981569] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
> [  190.017506] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
> [  190.731632] pcieport 0000:04:04.0: pciehp: Slot(4): Link Down
> [  190.731640] pcieport 0000:04:04.0: pciehp: Slot(4): Card not present

The PCIe link towards the dock goes down.

> [  190.731664] pcieport 0000:3e:04.0: Refused to change power state, currently in D3
> [  190.732691] xhci_hcd 0000:3f:00.0: remove, state 1
> [  190.732712] usb usb6: USB disconnect, device number 1
> [  190.732718] usb 6-1: USB disconnect, device number 2
> [  190.732724] usb 6-1.2: USB disconnect, device number 3
> [  190.732953] xhci_hcd 0000:3f:00.0: xHCI host controller not responding, assume dead
> [  190.763874] xhci_hcd 0000:3f:00.0: USB bus 6 deregistered
> [  190.763902] xhci_hcd 0000:3f:00.0: remove, state 1
> [  190.763918] usb usb5: USB disconnect, device number 1
> [  190.763926] usb 5-1: USB disconnect, device number 2
> [  190.763933] usb 5-1.3: USB disconnect, device number 3
> [  190.765347] usb 5-1.5: USB disconnect, device number 4
> [  190.767022] usb 5-1.6: USB disconnect, device number 5
> [  190.771437] xhci_hcd 0000:3f:00.0: Host halt failed, -19
> [  190.771445] xhci_hcd 0000:3f:00.0: Host not accessible, reset failed.
> [  190.772400] xhci_hcd 0000:3f:00.0: USB bus 5 deregistered
> [  190.773654] pcieport 0000:3b:01.0: Refused to change power state, currently in D3
> [  190.774231] pci_bus 0000:3c: busn_res: [bus 3c] is released
> [  190.774473] pci 0000:3b:01.0: Removing from iommu group 19
> [  190.774712] pci 0000:3f:00.0: Removing from iommu group 19
> [  190.774784] pci_bus 0000:3f: busn_res: [bus 3f] is released
> [  190.774990] pci 0000:3e:01.0: Removing from iommu group 19
> [  190.775345] pci_bus 0000:40: busn_res: [bus 40-6d] is released
> [  190.775566] pci 0000:3e:04.0: Removing from iommu group 19
> [  190.775624] pci_bus 0000:3e: busn_res: [bus 3e-6d] is released
> [  190.775817] pci 0000:3d:00.0: Removing from iommu group 19
> [  190.776158] pci_bus 0000:3d: busn_res: [bus 3d-6d] is released
> [  190.776360] pci 0000:3b:04.0: Removing from iommu group 19
> [  190.776692] pci_bus 0000:3b: busn_res: [bus 3b-6d] is released
> [  190.776890] pci 0000:3a:00.0: Removing from iommu group 19
> [  191.029202] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
> [  192.041443] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
> [  194.077394] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20270503
> [  195.081341] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x20370503
> [  196.085350] snd_hda_intel 0000:00:1f.3: No response from codec, resetting bus: last cmd=0x201f0500
> [  196.121810] (elapsed 12.986 seconds) done.
> [  196.121823] printk: Suspending console(s) (use no_console_suspend to debug)
> [  196.781066] thunderbolt 0-303: device disconnected
> [  196.781161] thunderbolt 0-3: device disconnected

And seems the whole TBT link goes down as well.

What does /sys/bus/thunderbolt/devices/0-0/nvm_version contain?

Also can you add CONFIG_PCI_DEBUG=y in your .config and reproduce so we
can maybe see what is happening in the PCIe side.

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-04 14:24 ` Mika Westerberg
@ 2019-11-04 14:44   ` Mika Westerberg
  2019-11-04 15:44     ` Mika Westerberg
  0 siblings, 1 reply; 34+ messages in thread
From: Mika Westerberg @ 2019-11-04 14:44 UTC (permalink / raw)
  To: Paul Menzel
  Cc: Andreas Noever, Michael Jamet, Yehezkel Bernat,
	Christian Kellner, Linux Kernel Mailing List, Mario Limonciello

On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
> Hi,
> 
> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
> > Dear Linux folks,
> > 
> > On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
> > suspending the system, and resuming with Dell’s Thunderbolt TB16
> > dock connected, the USB input devices, keyboard and mouse,
> > connected to the TB16 stop working. They work for a few seconds
> > (mouse cursor can be moved), but then stop working. The laptop
> > keyboard and touchpad still works fine. All firmware is up-to-date
> > according to `fwupdmgr`.
> 
> What are the exact steps to reproduce? Just "echo mem >
> /sys/power/state" and then resume by pressing power button?

I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
suspend/resume cycles (to s2idle) but I don't see any issues.

I may have older/different firmware than you, though.

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-04 14:44   ` Mika Westerberg
@ 2019-11-04 15:44     ` Mika Westerberg
  2019-11-04 15:49       ` Mario.Limonciello
  0 siblings, 1 reply; 34+ messages in thread
From: Mika Westerberg @ 2019-11-04 15:44 UTC (permalink / raw)
  To: Paul Menzel
  Cc: Andreas Noever, Michael Jamet, Yehezkel Bernat,
	Christian Kellner, Linux Kernel Mailing List, Mario Limonciello

On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
> > Hi,
> > 
> > On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
> > > Dear Linux folks,
> > > 
> > > On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
> > > suspending the system, and resuming with Dell’s Thunderbolt TB16
> > > dock connected, the USB input devices, keyboard and mouse,
> > > connected to the TB16 stop working. They work for a few seconds
> > > (mouse cursor can be moved), but then stop working. The laptop
> > > keyboard and touchpad still works fine. All firmware is up-to-date
> > > according to `fwupdmgr`.
> > 
> > What are the exact steps to reproduce? Just "echo mem >
> > /sys/power/state" and then resume by pressing power button?
> 
> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
> suspend/resume cycles (to s2idle) but I don't see any issues.
> 
> I may have older/different firmware than you, though.

Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
on my system :/

^ permalink raw reply	[flat|nested] 34+ messages in thread

* RE: USB devices on Dell TB16 dock stop working after resuming
  2019-11-04 15:44     ` Mika Westerberg
@ 2019-11-04 15:49       ` Mario.Limonciello
  2019-11-04 16:11         ` Paul Menzel
  0 siblings, 1 reply; 34+ messages in thread
From: Mario.Limonciello @ 2019-11-04 15:49 UTC (permalink / raw)
  To: mika.westerberg, pmenzel
  Cc: andreas.noever, michael.jamet, YehezkelShB, ck, linux-kernel,
	anthony.wong

> -----Original Message-----
> From: Mika Westerberg <mika.westerberg@linux.intel.com>
> Sent: Monday, November 4, 2019 9:45 AM
> To: Paul Menzel
> Cc: Andreas Noever; Michael Jamet; Yehezkel Bernat; Christian Kellner; Linux
> Kernel Mailing List; Limonciello, Mario
> Subject: Re: USB devices on Dell TB16 dock stop working after resuming
> 
> 
> [EXTERNAL EMAIL]
> 
> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
> > On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
> > > Hi,
> > >
> > > On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
> > > > Dear Linux folks,
> > > >
> > > > On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
> > > > suspending the system, and resuming with Dell’s Thunderbolt TB16
> > > > dock connected, the USB input devices, keyboard and mouse,
> > > > connected to the TB16 stop working. They work for a few seconds
> > > > (mouse cursor can be moved), but then stop working. The laptop
> > > > keyboard and touchpad still works fine. All firmware is up-to-date
> > > > according to `fwupdmgr`.
> > >
> > > What are the exact steps to reproduce? Just "echo mem >
> > > /sys/power/state" and then resume by pressing power button?
> >
> > I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
> > suspend/resume cycles (to s2idle) but I don't see any issues.
> >
> > I may have older/different firmware than you, though.
> 
> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
> on my system :/

Loop Anthony.  Anthony can you see if you guys repro this at all too?

As a potential point of comparison and sometimes pain area, I'm wondering if
something in userland is poking power states for Paul leading to this.

Paul what sort of power management policies are you using on your machine? 
Anything like:
* powertop  --auto-tune, 
* TLP
* systemd > 243 (contains some stuff for automatic suspend)


^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-04 15:49       ` Mario.Limonciello
@ 2019-11-04 16:11         ` Paul Menzel
  2019-11-04 16:17           ` Mario.Limonciello
  2019-11-04 16:21           ` Mika Westerberg
  0 siblings, 2 replies; 34+ messages in thread
From: Paul Menzel @ 2019-11-04 16:11 UTC (permalink / raw)
  To: Mario Limonciello, Mika Westerberg
  Cc: Andreas Noever, Michael Jamet, Yehezkel Bernat,
	Christian Kellner, linux-kernel, Anthony Wong

[-- Attachment #1: Type: text/plain, Size: 2198 bytes --]

Dear Mika, dear Mario,


On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:

>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
>> Sent: Monday, November 4, 2019 9:45 AM

>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:

>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:

>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
>>>>> dock connected, the USB input devices, keyboard and mouse,
>>>>> connected to the TB16 stop working. They work for a few seconds
>>>>> (mouse cursor can be moved), but then stop working. The laptop
>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
>>>>> according to `fwupdmgr`.
>>>>
>>>> What are the exact steps to reproduce? Just "echo mem >
>>>> /sys/power/state" and then resume by pressing power button?

GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
display. So more than `echo mem > /sys/power/state` is done. What
distribution do you use?

>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
>>> suspend/resume cycles (to s2idle) but I don't see any issues.
>>>
>>> I may have older/different firmware than you, though.
>>
>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
>> on my system :/

The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
Updating to the recent version (I got the logs with) did not fix the issue.

> Loop Anthony.  Anthony can you see if you guys repro this at all too?
> 
> As a potential point of comparison and sometimes pain area, I'm wondering if
> something in userland is poking power states for Paul leading to this.
> 
> Paul what sort of power management policies are you using on your machine? 
> Anything like:
> * powertop  --auto-tune, 
> * TLP
> * systemd > 243 (contains some stuff for automatic suspend)

I’ll check with the user again, but to my knowledge nothing from the list is
used on the device.


Kind regards,

Paul


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]

^ permalink raw reply	[flat|nested] 34+ messages in thread

* RE: USB devices on Dell TB16 dock stop working after resuming
  2019-11-04 16:11         ` Paul Menzel
@ 2019-11-04 16:17           ` Mario.Limonciello
  2019-11-04 16:22             ` Paul Menzel
  2019-11-04 16:21           ` Mika Westerberg
  1 sibling, 1 reply; 34+ messages in thread
From: Mario.Limonciello @ 2019-11-04 16:17 UTC (permalink / raw)
  To: pmenzel, mika.westerberg
  Cc: andreas.noever, michael.jamet, YehezkelShB, ck, linux-kernel,
	anthony.wong

> -----Original Message-----
> From: Paul Menzel <pmenzel@molgen.mpg.de>
> Sent: Monday, November 4, 2019 10:11 AM
> To: Limonciello, Mario; Mika Westerberg
> Cc: Andreas Noever; Michael Jamet; Yehezkel Bernat; Christian Kellner; linux-
> kernel@vger.kernel.org; Anthony Wong
> Subject: Re: USB devices on Dell TB16 dock stop working after resuming
> 
> Dear Mika, dear Mario,
> 
> 
> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
> 
> >> From: Mika Westerberg <mika.westerberg@linux.intel.com>
> >> Sent: Monday, November 4, 2019 9:45 AM
> 
> >> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
> >>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
> 
> >>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
> 
> >>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
> >>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
> >>>>> dock connected, the USB input devices, keyboard and mouse,
> >>>>> connected to the TB16 stop working. They work for a few seconds
> >>>>> (mouse cursor can be moved), but then stop working. The laptop
> >>>>> keyboard and touchpad still works fine. All firmware is up-to-date
> >>>>> according to `fwupdmgr`.
> >>>>
> >>>> What are the exact steps to reproduce? Just "echo mem >
> >>>> /sys/power/state" and then resume by pressing power button?
> 
> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
> display. So more than `echo mem > /sys/power/state` is done. What
> distribution do you use?

I guess this is then using systemctl's sleep command and anything it does as a
result?

IIRC that has support for doing extra stuff if you want to via scripts.
Any extra scripts you've put in place?  Or your distro is running?

> 
> >>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
> >>> suspend/resume cycles (to s2idle) but I don't see any issues.
> >>>
> >>> I may have older/different firmware than you, though.
> >>
> >> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
> >> on my system :/
> 
> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
> Updating to the recent version (I got the logs with) did not fix the issue.
> 
> > Loop Anthony.  Anthony can you see if you guys repro this at all too?
> >
> > As a potential point of comparison and sometimes pain area, I'm wondering if
> > something in userland is poking power states for Paul leading to this.
> >
> > Paul what sort of power management policies are you using on your machine?
> > Anything like:
> > * powertop  --auto-tune,
> > * TLP
> > * systemd > 243 (contains some stuff for automatic suspend)
> 
> I’ll check with the user again, but to my knowledge nothing from the list is
> used on the device.
> 

Those are just illustrative examples, anything else that you're doing above and beyond
"stock" Debian unstable would be useful to note too in this area.

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-04 16:11         ` Paul Menzel
  2019-11-04 16:17           ` Mario.Limonciello
@ 2019-11-04 16:21           ` Mika Westerberg
  2019-11-19 16:55             ` Paul Menzel
  1 sibling, 1 reply; 34+ messages in thread
From: Mika Westerberg @ 2019-11-04 16:21 UTC (permalink / raw)
  To: Paul Menzel
  Cc: Mario Limonciello, Andreas Noever, Michael Jamet,
	Yehezkel Bernat, Christian Kellner, linux-kernel, Anthony Wong

On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
> Dear Mika, dear Mario,
> 
> 
> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
> 
> >> From: Mika Westerberg <mika.westerberg@linux.intel.com>
> >> Sent: Monday, November 4, 2019 9:45 AM
> 
> >> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
> >>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
> 
> >>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
> 
> >>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
> >>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
> >>>>> dock connected, the USB input devices, keyboard and mouse,
> >>>>> connected to the TB16 stop working. They work for a few seconds
> >>>>> (mouse cursor can be moved), but then stop working. The laptop
> >>>>> keyboard and touchpad still works fine. All firmware is up-to-date
> >>>>> according to `fwupdmgr`.
> >>>>
> >>>> What are the exact steps to reproduce? Just "echo mem >
> >>>> /sys/power/state" and then resume by pressing power button?
> 
> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
> display. So more than `echo mem > /sys/power/state` is done. What
> distribution do you use?

I have buildroot based "distro" so there is no UI running.

> >>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
> >>> suspend/resume cycles (to s2idle) but I don't see any issues.
> >>>
> >>> I may have older/different firmware than you, though.
> >>
> >> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
> >> on my system :/
> 
> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
> Updating to the recent version (I got the logs with) did not fix the issue.

I also tried v40 (that was originally on that system) but I was not able
to reproduce it.

Do you know if the user changed any BIOS settings?

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-04 16:17           ` Mario.Limonciello
@ 2019-11-04 16:22             ` Paul Menzel
  0 siblings, 0 replies; 34+ messages in thread
From: Paul Menzel @ 2019-11-04 16:22 UTC (permalink / raw)
  To: Mario Limonciello, Mika Westerberg
  Cc: Andreas Noever, Michael Jamet, Yehezkel Bernat,
	Christian Kellner, linux-kernel, Anthony Wong

[-- Attachment #1: Type: text/plain, Size: 3067 bytes --]

Dear Mario,


On 2019-11-04 17:17, Mario.Limonciello@dell.com wrote:

>> From: Paul Menzel <pmenzel@molgen.mpg.de>
>> Sent: Monday, November 4, 2019 10:11 AM

>> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
>>
>>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
>>>> Sent: Monday, November 4, 2019 9:45 AM
>>
>>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
>>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
>>
>>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
>>
>>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
>>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
>>>>>>> dock connected, the USB input devices, keyboard and mouse,
>>>>>>> connected to the TB16 stop working. They work for a few seconds
>>>>>>> (mouse cursor can be moved), but then stop working. The laptop
>>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
>>>>>>> according to `fwupdmgr`.
>>>>>>
>>>>>> What are the exact steps to reproduce? Just "echo mem >
>>>>>> /sys/power/state" and then resume by pressing power button?
>>
>> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
>> display. So more than `echo mem > /sys/power/state` is done. What
>> distribution do you use?
> 
> I guess this is then using systemctl's sleep command and anything it does as a
> result?
> 
> IIRC that has support for doing extra stuff if you want to via scripts.
> Any extra scripts you've put in place?  Or your distro is running?

Debian Sid/unstable configuration is used with no custom changes. I’ll check
tomorrow, if it’s reproducible with `echo mem | sudo too /sys/power/state`.

>>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
>>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
>>>>>
>>>>> I may have older/different firmware than you, though.
>>>>
>>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
>>>> on my system :/
>>
>> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
>> Updating to the recent version (I got the logs with) did not fix the issue.
>>
>>> Loop Anthony.  Anthony can you see if you guys repro this at all too?
>>>
>>> As a potential point of comparison and sometimes pain area, I'm wondering if
>>> something in userland is poking power states for Paul leading to this.
>>>
>>> Paul what sort of power management policies are you using on your machine?
>>> Anything like:
>>> * powertop  --auto-tune,
>>> * TLP
>>> * systemd > 243 (contains some stuff for automatic suspend)
>>
>> I’ll check with the user again, but to my knowledge nothing from the list is
>> used on the device.
> 
> Those are just illustrative examples, anything else that you're doing
> above and beyond "stock" Debian unstable would be useful to note too
> in this area.

Sorry for being unclear. No customizations were done.


Kind regards,

Paul


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-04 16:21           ` Mika Westerberg
@ 2019-11-19 16:55             ` Paul Menzel
  2019-11-19 17:20               ` Paul Menzel
  2019-11-20 10:50               ` Mika Westerberg
  0 siblings, 2 replies; 34+ messages in thread
From: Paul Menzel @ 2019-11-19 16:55 UTC (permalink / raw)
  To: Mika Westerberg
  Cc: Mario Limonciello, Andreas Noever, Michael Jamet,
	Yehezkel Bernat, Christian Kellner, linux-kernel, Anthony Wong

[-- Attachment #1: Type: text/plain, Size: 4304 bytes --]

Dear Mika,


On 2019-11-04 17:21, Mika Westerberg wrote:
> On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:

>> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
>>
>>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
>>>> Sent: Monday, November 4, 2019 9:45 AM
>>
>>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
>>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
>>
>>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
>>
>>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
>>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
>>>>>>> dock connected, the USB input devices, keyboard and mouse,
>>>>>>> connected to the TB16 stop working. They work for a few seconds
>>>>>>> (mouse cursor can be moved), but then stop working. The laptop
>>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
>>>>>>> according to `fwupdmgr`.
>>>>>>
>>>>>> What are the exact steps to reproduce? Just "echo mem >
>>>>>> /sys/power/state" and then resume by pressing power button?
>>
>> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
>> display. So more than `echo mem > /sys/power/state` is done. What
>> distribution do you use?
> 
> I have buildroot based "distro" so there is no UI running.

Hmm, this is quite different from the “normal” use-case of the these devices.
That way you won’t hit the bugs of the normal users. ;-)

>>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
>>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
>>>>>
>>>>> I may have older/different firmware than you, though.
>>>>
>>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
>>>> on my system :/
>>
>> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
>> Updating to the recent version (I got the logs with) did not fix the issue.
> 
> I also tried v40 (that was originally on that system) but I was not able
> to reproduce it.
> 
> Do you know if the user changed any BIOS settings?

We had to disable the Thunderbolt security settings as otherwise the USB
devices wouldn’t work at cold boot either.

So, I built Linux 5.4-rc8 (`make bindeb-pkg -j8`), but unfortunately the
error is still there. Sometimes, re-plugging the dock helped, and sometimes
it did not.

Please find the logs attached. The strange thing is, the Linux kernel detects
the devices and I do not see any disconnect events. But, `lsusb` does not list
the keyboard and the mouse. Is that expected.

Additionally, despite `CONFIG_PCI_DEBUG` I do not see more elaborate messages.

Lastly, could the daemon boltd have anything to do with this?

```
$ boltctl --version
bolt 0.8
$ boltctl list
 ● Dell Thunderbolt Cable
   ├─ type:          peripheral
   ├─ name:          Dell Thunderbolt Cable
   ├─ vendor:        Dell
   ├─ uuid:          0082b09d-2f5f-d400-ffff-ffffffffffff
   ├─ status:        authorized
   │  ├─ domain:     ca030000-0090-8708-2328-211e02222a24
   │  └─ authflags:  none
   ├─ authorized:    Tue 19 Nov 2019 11:35:11 AM UTC
   ├─ connected:     Tue 19 Nov 2019 11:35:11 AM UTC
   └─ stored:        Fri 13 Sep 2019 01:00:25 PM UTC
      ├─ policy:     auto
      └─ key:        no

 ● Dell Thunderbolt Dock
   ├─ type:          peripheral
   ├─ name:          Dell Thunderbolt Dock
   ├─ vendor:        Dell
   ├─ uuid:          10d34968-1d46-8680-ffff-ffffffffffff
   ├─ status:        authorized
   │  ├─ domain:     ca030000-0090-8708-2328-211e02222a24
   │  └─ authflags:  none
   ├─ authorized:    Tue 19 Nov 2019 11:35:11 AM UTC
   ├─ connected:     Tue 19 Nov 2019 11:35:11 AM UTC
   └─ stored:        Fri 13 Sep 2019 01:01:02 PM UTC
      ├─ policy:     auto
      └─ key:        no

```


Kind regards,

Paul



PS: Suspending the device with the dock attached, and unplugging the dock the
power button LED lights up, but the screen stays black and the device needs
to be forcefully powered off by pressing the power button for 12(?) seconds.



[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-19 16:55             ` Paul Menzel
@ 2019-11-19 17:20               ` Paul Menzel
  2019-11-20 10:50               ` Mika Westerberg
  1 sibling, 0 replies; 34+ messages in thread
From: Paul Menzel @ 2019-11-19 17:20 UTC (permalink / raw)
  To: Mika Westerberg
  Cc: Mario Limonciello, Andreas Noever, Michael Jamet,
	Yehezkel Bernat, Christian Kellner, linux-kernel, Anthony Wong


[-- Attachment #1.1: Type: text/plain, Size: 4555 bytes --]

[Linux 5.4-rc8 messages attached]

On 2019-11-19 17:55, Paul Menzel wrote:
> Dear Mika,
> 
> 
> On 2019-11-04 17:21, Mika Westerberg wrote:
>> On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
> 
>>> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
>>>
>>>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
>>>>> Sent: Monday, November 4, 2019 9:45 AM
>>>
>>>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
>>>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
>>>
>>>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
>>>
>>>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
>>>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
>>>>>>>> dock connected, the USB input devices, keyboard and mouse,
>>>>>>>> connected to the TB16 stop working. They work for a few seconds
>>>>>>>> (mouse cursor can be moved), but then stop working. The laptop
>>>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
>>>>>>>> according to `fwupdmgr`.
>>>>>>>
>>>>>>> What are the exact steps to reproduce? Just "echo mem >
>>>>>>> /sys/power/state" and then resume by pressing power button?
>>>
>>> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
>>> display. So more than `echo mem > /sys/power/state` is done. What
>>> distribution do you use?
>>
>> I have buildroot based "distro" so there is no UI running.
> 
> Hmm, this is quite different from the “normal” use-case of the these devices.
> That way you won’t hit the bugs of the normal users. ;-)
> 
>>>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
>>>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
>>>>>>
>>>>>> I may have older/different firmware than you, though.
>>>>>
>>>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
>>>>> on my system :/
>>>
>>> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
>>> Updating to the recent version (I got the logs with) did not fix the issue.
>>
>> I also tried v40 (that was originally on that system) but I was not able
>> to reproduce it.
>>
>> Do you know if the user changed any BIOS settings?
> 
> We had to disable the Thunderbolt security settings as otherwise the USB
> devices wouldn’t work at cold boot either.
> 
> So, I built Linux 5.4-rc8 (`make bindeb-pkg -j8`), but unfortunately the
> error is still there. Sometimes, re-plugging the dock helped, and sometimes
> it did not.
> 
> Please find the logs attached. The strange thing is, the Linux kernel detects
> the devices and I do not see any disconnect events. But, `lsusb` does not list
> the keyboard and the mouse. Is that expected.
> 
> Additionally, despite `CONFIG_PCI_DEBUG` I do not see more elaborate messages.
> 
> Lastly, could the daemon boltd have anything to do with this?
> 
> ```
> $ boltctl --version
> bolt 0.8
> $ boltctl list
>  ● Dell Thunderbolt Cable
>    ├─ type:          peripheral
>    ├─ name:          Dell Thunderbolt Cable
>    ├─ vendor:        Dell
>    ├─ uuid:          0082b09d-2f5f-d400-ffff-ffffffffffff
>    ├─ status:        authorized
>    │  ├─ domain:     ca030000-0090-8708-2328-211e02222a24
>    │  └─ authflags:  none
>    ├─ authorized:    Tue 19 Nov 2019 11:35:11 AM UTC
>    ├─ connected:     Tue 19 Nov 2019 11:35:11 AM UTC
>    └─ stored:        Fri 13 Sep 2019 01:00:25 PM UTC
>       ├─ policy:     auto
>       └─ key:        no
> 
>  ● Dell Thunderbolt Dock
>    ├─ type:          peripheral
>    ├─ name:          Dell Thunderbolt Dock
>    ├─ vendor:        Dell
>    ├─ uuid:          10d34968-1d46-8680-ffff-ffffffffffff
>    ├─ status:        authorized
>    │  ├─ domain:     ca030000-0090-8708-2328-211e02222a24
>    │  └─ authflags:  none
>    ├─ authorized:    Tue 19 Nov 2019 11:35:11 AM UTC
>    ├─ connected:     Tue 19 Nov 2019 11:35:11 AM UTC
>    └─ stored:        Fri 13 Sep 2019 01:01:02 PM UTC
>       ├─ policy:     auto
>       └─ key:        no
> 
> ```
> 
> 
> Kind regards,
> 
> Paul
> 
> 
> 
> PS: Suspending the device with the dock attached, and unplugging the dock the
> power button LED lights up, but the screen stays black and the device needs
> to be forcefully powered off by pressing the power button for 12(?) seconds.

[-- Attachment #1.2: 20191119-connect-dock-after-resume.txt --]
[-- Type: text/plain, Size: 129340 bytes --]

[    0.000000] microcode: microcode updated early to revision 0xca, date = 2019-10-03
[    0.000000] Linux version 5.4.0-rc8 (molgenit@hassler) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 SMP Tue Nov 19 11:41:00 CET 2019
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.0-rc8 root=UUID=b3902a37-187f-4181-bc15-199f7633279e ro quiet noisapnp cryptmgr.notests btusb.enable_autosuspend=y log_buf_len=4M
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002a058fff] usable
[    0.000000] BIOS-e820: [mem 0x000000002a059000-0x000000002a059fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000002a05a000-0x000000002a05afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000002a05b000-0x000000003a926fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003a927000-0x000000003d734fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003d735000-0x000000003d7b1fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003d7b2000-0x000000003d87cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003d87d000-0x000000003fe22fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003fe23000-0x000000003fffefff] type 20
[    0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x0000000047ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000048000000-0x0000000048dfffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000048e00000-0x000000004f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004ae7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x3d74e000  ACPI=0x3d74e000  SMBIOS=0xf0000  SMBIOS 3.0=0xf0020  TPMFinalLog=0x3d7db000  ESRT=0x3fa95218  MEMATTR=0x384fe018 
[    0.000000] SMBIOS 3.2.1 present.
[    0.000000] DMI: Dell Inc. XPS 13 9380/0KTW76, BIOS 1.8.0 10/01/2019
[    0.000000] tsc: Detected 2000.000 MHz processor
[    0.001060] tsc: Detected 1999.968 MHz TSC
[    0.001060] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001061] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001066] last_pfn = 0x4ae800 max_arch_pfn = 0x400000000
[    0.001068] MTRR default type: write-back
[    0.001069] MTRR fixed ranges enabled:
[    0.001070]   00000-9FFFF write-back
[    0.001070]   A0000-BFFFF uncachable
[    0.001071]   C0000-FFFFF write-protect
[    0.001071] MTRR variable ranges enabled:
[    0.001072]   0 base 0080000000 mask 7F80000000 uncachable
[    0.001072]   1 base 0060000000 mask 7FE0000000 uncachable
[    0.001073]   2 base 0050000000 mask 7FF0000000 write-combining
[    0.001073]   3 base 004C000000 mask 7FFC000000 uncachable
[    0.001074]   4 base 004B000000 mask 7FFF000000 uncachable
[    0.001074]   5 disabled
[    0.001074]   6 disabled
[    0.001075]   7 disabled
[    0.001075]   8 disabled
[    0.001075]   9 disabled
[    0.001518] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001669] last_pfn = 0x48e00 max_arch_pfn = 0x400000000
[    0.006963] esrt: Reserving ESRT space from 0x000000003fa95218 to 0x000000003fa95250.
[    0.006970] Using GB pages for direct mapping
[    0.006971] BRK [0x393401000, 0x393401fff] PGTABLE
[    0.006972] BRK [0x393402000, 0x393402fff] PGTABLE
[    0.006973] BRK [0x393403000, 0x393403fff] PGTABLE
[    0.006994] BRK [0x393404000, 0x393404fff] PGTABLE
[    0.006995] BRK [0x393405000, 0x393405fff] PGTABLE
[    0.007076] BRK [0x393406000, 0x393406fff] PGTABLE
[    0.007118] BRK [0x393407000, 0x393407fff] PGTABLE
[    0.007140] BRK [0x393408000, 0x393408fff] PGTABLE
[    0.007148] BRK [0x393409000, 0x393409fff] PGTABLE
[    0.007310] printk: log_buf_len: 4194304 bytes
[    0.007311] printk: early log buf free: 125860(96%)
[    0.007311] Secure boot could not be determined
[    0.007312] RAMDISK: [mem 0x33f0b000-0x34ff3fff]
[    0.007322] ACPI: Early table checksum verification disabled
[    0.007324] ACPI: RSDP 0x000000003D74E000 000024 (v02 DELL  )
[    0.007326] ACPI: XSDT 0x000000003D74E0B0 0000E4 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.007330] ACPI: FACP 0x000000003D78B720 000114 (v06 DELL   CBX3     01072009 AMI  00010013)
[    0.007333] ACPI: DSDT 0x000000003D74E228 03D4F7 (v02 DELL   CBX3     01072009 INTL 20160527)
[    0.007335] ACPI: FACS 0x000000003D87BC00 000040
[    0.007336] ACPI: APIC 0x000000003D78B838 0000BC (v04 DELL   CBX3     01072009 AMI  00010013)
[    0.007338] ACPI: FPDT 0x000000003D78B8F8 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.007339] ACPI: FIDT 0x000000003D78B940 00009C (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.007341] ACPI: MCFG 0x000000003D78B9E0 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
[    0.007342] ACPI: SSDT 0x000000003D78BA20 001B1C (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.007344] ACPI: BOOT 0x000000003D78D540 000028 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.007345] ACPI: SSDT 0x000000003D78D568 001663 (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.007347] ACPI: HPET 0x000000003D78EBD0 000038 (v01 DELL\x CBX3     00000002      01000013)
[    0.007349] ACPI: SSDT 0x000000003D78EC08 001FE2 (v02 DELL\x WHL_Tbt_ 00001000 INTL 20160527)
[    0.007350] ACPI: SSDT 0x000000003D790BF0 0030D7 (v02 INTEL  xh_whlt4 00000000 INTL 20160527)
[    0.007352] ACPI: UEFI 0x000000003D793CC8 000042 (v01 DELL\x CBX3     00000002      01000013)
[    0.007353] ACPI: LPIT 0x000000003D793D10 000094 (v01 DELL\x CBX3     00000002      01000013)
[    0.007355] ACPI: SSDT 0x000000003D793DA8 0027DE (v02 DELL\x PtidDevc 00001000 INTL 20160527)
[    0.007356] ACPI: SSDT 0x000000003D796588 00132E (v02 DELL\x TbtTypeC 00000000 INTL 20160527)
[    0.007358] ACPI: DBGP 0x000000003D7978B8 000034 (v01 DELL\x CBX3     00000002      01000013)
[    0.007359] ACPI: DBG2 0x000000003D7978F0 000054 (v00 DELL\x CBX3     00000002      01000013)
[    0.007361] ACPI: SSDT 0x000000003D797948 00081C (v02 DELL\x UsbCTabl 00001000 INTL 20160527)
[    0.007362] ACPI: SSDT 0x000000003D798168 007FBF (v02 DptfTa DptfTabl 00001000 INTL 20160527)
[    0.007364] ACPI: DMAR 0x000000003D7A0128 0000A8 (v01 INTEL  EDK2     00000002      01000013)
[    0.007365] ACPI: SSDT 0x000000003D7A01D0 000144 (v02 Intel  ADebTabl 00001000 INTL 20160527)
[    0.007367] ACPI: NHLT 0x000000003D7A0318 00002D (v00 INTEL  EDK2     00000002      01000013)
[    0.007368] ACPI: BGRT 0x000000003D7A0348 000038 (v00 DELL   CBX3     01072009 AMI  00010013)
[    0.007370] ACPI: TPM2 0x000000003D7A0380 000034 (v04 DELL\x CBX3     00000001 AMI  00000000)
[    0.007376] ACPI: Local APIC address 0xfee00000
[    0.007665] No NUMA configuration found
[    0.007665] Faking a node at [mem 0x0000000000000000-0x00000004ae7fffff]
[    0.007668] NODE_DATA(0) allocated [mem 0x4ae3fb000-0x4ae3fffff]
[    0.007707] Zone ranges:
[    0.007707]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.007708]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.007709]   Normal   [mem 0x0000000100000000-0x00000004ae7fffff]
[    0.007709]   Device   empty
[    0.007710] Movable zone start for each node
[    0.007710] Early memory node ranges
[    0.007711]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.007711]   node   0: [mem 0x000000000009f000-0x000000000009ffff]
[    0.007712]   node   0: [mem 0x0000000000100000-0x000000002a058fff]
[    0.007712]   node   0: [mem 0x000000002a05b000-0x000000003a926fff]
[    0.007713]   node   0: [mem 0x000000003ffff000-0x000000003fffffff]
[    0.007713]   node   0: [mem 0x0000000048000000-0x0000000048dfffff]
[    0.007713]   node   0: [mem 0x0000000100000000-0x00000004ae7fffff]
[    0.008057] Zeroed struct page in unavailable ranges: 51516 pages
[    0.008058] Initmem setup node 0 [mem 0x0000000000001000-0x00000004ae7fffff]
[    0.008059] On node 0 totalpages: 4103876
[    0.008060]   DMA zone: 64 pages used for memmap
[    0.008061]   DMA zone: 23 pages reserved
[    0.008061]   DMA zone: 3998 pages, LIFO batch:0
[    0.008099]   DMA32 zone: 3741 pages used for memmap
[    0.008100]   DMA32 zone: 239398 pages, LIFO batch:63
[    0.014044]   Normal zone: 60320 pages used for memmap
[    0.014045]   Normal zone: 3860480 pages, LIFO batch:63
[    0.051881] Reserving Intel graphics memory at [mem 0x4b800000-0x4f7fffff]
[    0.052349] ACPI: PM-Timer IO Port: 0x1808
[    0.052350] ACPI: Local APIC address 0xfee00000
[    0.052354] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.052355] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.052355] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.052355] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.052356] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.052356] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.052356] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.052357] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.052403] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.052405] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.052406] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.052406] ACPI: IRQ0 used by override.
[    0.052407] ACPI: IRQ9 used by override.
[    0.052408] Using ACPI (MADT) for SMP configuration information
[    0.052409] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.052413] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.052437] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.052438] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.052439] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.052440] PM: Registered nosave memory: [mem 0x2a059000-0x2a059fff]
[    0.052440] PM: Registered nosave memory: [mem 0x2a05a000-0x2a05afff]
[    0.052441] PM: Registered nosave memory: [mem 0x3a927000-0x3d734fff]
[    0.052442] PM: Registered nosave memory: [mem 0x3d735000-0x3d7b1fff]
[    0.052442] PM: Registered nosave memory: [mem 0x3d7b2000-0x3d87cfff]
[    0.052442] PM: Registered nosave memory: [mem 0x3d87d000-0x3fe22fff]
[    0.052443] PM: Registered nosave memory: [mem 0x3fe23000-0x3fffefff]
[    0.052444] PM: Registered nosave memory: [mem 0x40000000-0x47ffffff]
[    0.052445] PM: Registered nosave memory: [mem 0x48e00000-0x4f7fffff]
[    0.052445] PM: Registered nosave memory: [mem 0x4f800000-0xdfffffff]
[    0.052445] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.052446] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.052446] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.052446] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.052447] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.052447] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.052447] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.052447] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.052448] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.052449] [mem 0x4f800000-0xdfffffff] available for PCI devices
[    0.052450] Booting paravirtualized kernel on bare hardware
[    0.052452] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.120553] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.120761] percpu: Embedded 53 pages/cpu s178584 r8192 d30312 u262144
[    0.120766] pcpu-alloc: s178584 r8192 d30312 u262144 alloc=1*2097152
[    0.120767] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.120785] Built 1 zonelists, mobility grouping on.  Total pages: 4039728
[    0.120785] Policy zone: Normal
[    0.120786] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.0-rc8 root=UUID=b3902a37-187f-4181-bc15-199f7633279e ro quiet noisapnp cryptmgr.notests btusb.enable_autosuspend=y log_buf_len=4M
[    0.121901] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.122424] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.122475] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.126958] Calgary: detecting Calgary via BIOS EBDA area
[    0.126960] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.170833] Memory: 15961696K/16415504K available (10243K kernel code, 1196K rwdata, 3452K rodata, 1660K init, 2072K bss, 453808K reserved, 0K cma-reserved)
[    0.170929] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.170939] ftrace: allocating 33493 entries in 131 pages
[    0.180657] rcu: Hierarchical RCU implementation.
[    0.180659] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.180659] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.180660] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.182904] NR_IRQS: 33024, nr_irqs: 2048, preallocated irqs: 16
[    0.183296] random: crng done (trusting CPU's manufacturer)
[    0.183315] Console: colour dummy device 80x25
[    0.183319] printk: console [tty0] enabled
[    0.183331] ACPI: Core revision 20190816
[    0.183693] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.183802] APIC: Switch to symmetric I/O mode setup
[    0.183804] DMAR: Host address width 39
[    0.183805] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.183809] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.183810] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.183812] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.183813] DMAR: RMRR base: 0x0000003d691000 end: 0x0000003d6b0fff
[    0.183814] DMAR: RMRR base: 0x0000004b000000 end: 0x0000004f7fffff
[    0.183815] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.183815] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.183816] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.186157] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.186158] x2apic enabled
[    0.186182] Switched APIC routing to cluster x2apic.
[    0.191952] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.211658] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a8208cdd2, max_idle_ns: 881590748921 ns
[    0.211661] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.93 BogoMIPS (lpj=7999872)
[    0.211663] pid_max: default: 32768 minimum: 301
[    0.213659] LSM: Security Framework initializing
[    0.213663] Yama: becoming mindful.
[    0.213681] AppArmor: AppArmor initialized
[    0.213682] TOMOYO Linux initialized
[    0.213727] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.213759] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.213964] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.213979] process: using mwait in idle threads
[    0.213981] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.213982] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.213984] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.213985] Spectre V2 : Mitigation: Enhanced IBRS
[    0.213985] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.213986] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.213987] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.214329] Freeing SMP alternatives memory: 24K
[    0.215716] TSC deadline timer enabled
[    0.215721] smpboot: CPU0: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xc)
[    0.215781] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.215786] ... version:                4
[    0.215787] ... bit width:              48
[    0.215787] ... generic registers:      4
[    0.215787] ... value mask:             0000ffffffffffff
[    0.215788] ... max period:             00007fffffffffff
[    0.215788] ... fixed-purpose events:   3
[    0.215788] ... event mask:             000000070000000f
[    0.215814] rcu: Hierarchical SRCU implementation.
[    0.216269] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.216327] smp: Bringing up secondary CPUs ...
[    0.216369] x86: Booting SMP configuration:
[    0.216370] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.220075] smp: Brought up 1 node, 8 CPUs
[    0.220075] smpboot: Max logical packages: 1
[    0.220075] smpboot: Total of 8 processors activated (31999.48 BogoMIPS)
[    0.222070] devtmpfs: initialized
[    0.222070] x86/mm: Memory block size: 128MB
[    0.223992] PM: Registering ACPI NVS region [mem 0x2a059000-0x2a059fff] (4096 bytes)
[    0.223992] PM: Registering ACPI NVS region [mem 0x3d7b2000-0x3d87cfff] (831488 bytes)
[    0.223992] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.223992] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.223992] pinctrl core: initialized pinctrl subsystem
[    0.223992] NET: Registered protocol family 16
[    0.223992] audit: initializing netlink subsys (disabled)
[    0.223992] audit: type=2000 audit(1574162295.036:1): state=initialized audit_enabled=0 res=1
[    0.223992] cpuidle: using governor ladder
[    0.223992] cpuidle: using governor menu
[    0.223992] Simple Boot Flag at 0x47 set to 0x80
[    0.223992] ACPI: bus type PCI registered
[    0.223992] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.223992] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.223992] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.223992] PCI: Using configuration type 1 for base access
[    0.224369] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.224373] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.224373] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.455828] ACPI: Added _OSI(Module Device)
[    0.455828] ACPI: Added _OSI(Processor Device)
[    0.455828] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.455828] ACPI: Added _OSI(Processor Aggregator Device)
[    0.455828] ACPI: Added _OSI(Linux-Dell-Video)
[    0.455828] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.455828] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.492359] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    0.558493] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.571397] ACPI: Dynamic OEM Table Load:
[    0.571409] ACPI: SSDT 0xFFFF8A5FDBBA3000 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.572988] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.574154] ACPI: Dynamic OEM Table Load:
[    0.574161] ACPI: SSDT 0xFFFF8A5FDBBB8C00 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.575856] ACPI: Dynamic OEM Table Load:
[    0.575863] ACPI: SSDT 0xFFFF8A5FDB973000 00053F (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.577621] ACPI: Dynamic OEM Table Load:
[    0.577626] ACPI: SSDT 0xFFFF8A5FDBBB0000 00011B (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    0.579171] ACPI: Dynamic OEM Table Load:
[    0.579177] ACPI: SSDT 0xFFFF8A5FDB974800 000724 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    0.580754] ACPI: Dynamic OEM Table Load:
[    0.580759] ACPI: SSDT 0xFFFF8A5FDB975800 0005FC (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.582198] ACPI: Dynamic OEM Table Load:
[    0.582202] ACPI: SSDT 0xFFFF8A5FDBBBAC00 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.583645] ACPI: Dynamic OEM Table Load:
[    0.583651] ACPI: SSDT 0xFFFF8A5FDBBDB000 000AB0 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.585378] ACPI: Dynamic OEM Table Load:
[    0.585382] ACPI: SSDT 0xFFFF8A5FDBBBB000 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.589058] ACPI: EC: EC started
[    0.589059] ACPI: EC: interrupt blocked
[    0.598245] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[    0.598247] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.598247] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[    0.598248] ACPI: Interpreter enabled
[    0.598287] ACPI: (supports S0 S3 S4 S5)
[    0.598288] ACPI: Using IOAPIC for interrupt routing
[    0.598329] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.598737] ACPI: Enabled 9 GPEs in block 00 to 7F
[    0.602904] ACPI: Power Resource [WRST] (on)
[    0.602937] ACPI: Power Resource [DRST] (on)
[    0.603191] ACPI: Power Resource [PXP] (on)
[    0.608171] ACPI: Power Resource [USBC] (on)
[    0.608277] ACPI: Power Resource [PAUD] (on)
[    0.610279] ACPI: Power Resource [V0PR] (on)
[    0.610374] ACPI: Power Resource [V1PR] (on)
[    0.610463] ACPI: Power Resource [V2PR] (on)
[    0.614346] ACPI: Power Resource [WRST] (on)
[    0.622017] ACPI: Power Resource [PIN] (off)
[    0.622274] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.622278] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.623308] acpi PNP0A08:00: _OSC: platform does not support [AER]
[    0.625253] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
[    0.625897] PCI host bridge to bus 0000:00
[    0.625898] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.625899] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.625900] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.625901] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.625901] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.625902] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.625902] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.625903] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.625904] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.625904] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.625905] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.625905] pci_bus 0000:00: root bus resource [mem 0x4f800000-0xdfffffff window]
[    0.625906] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.625907] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.625910] pci_bus 0000:00: scanning bus
[    0.625915] pci 0000:00:00.0: [8086:3e34] type 00 class 0x060000
[    0.626007] pci 0000:00:02.0: [8086:3ea0] type 00 class 0x030000
[    0.626015] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[    0.626020] pci 0000:00:02.0: reg 0x18: [mem 0x50000000-0x5fffffff 64bit pref]
[    0.626023] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.626033] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.626124] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.626134] pci 0000:00:04.0: reg 0x10: [mem 0xdc510000-0xdc517fff 64bit]
[    0.626261] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.626271] pci 0000:00:08.0: reg 0x10: [mem 0xdc524000-0xdc524fff 64bit]
[    0.626400] pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000
[    0.626421] pci 0000:00:12.0: reg 0x10: [mem 0xdc523000-0xdc523fff 64bit]
[    0.626579] pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330
[    0.626596] pci 0000:00:14.0: reg 0x10: [mem 0xdc500000-0xdc50ffff 64bit]
[    0.626646] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.626649] pci 0000:00:14.0: PME# disabled
[    0.626751] pci 0000:00:14.2: [8086:9def] type 00 class 0x050000
[    0.626769] pci 0000:00:14.2: reg 0x10: [mem 0xdc51c000-0xdc51dfff 64bit]
[    0.626778] pci 0000:00:14.2: reg 0x18: [mem 0xdc522000-0xdc522fff 64bit]
[    0.626935] pci 0000:00:15.0: [8086:9de8] type 00 class 0x0c8000
[    0.627001] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.627334] pci 0000:00:15.1: [8086:9de9] type 00 class 0x0c8000
[    0.627412] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.627745] pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000
[    0.627766] pci 0000:00:16.0: reg 0x10: [mem 0xdc51f000-0xdc51ffff 64bit]
[    0.627834] pci 0000:00:16.0: PME# supported from D3hot
[    0.627837] pci 0000:00:16.0: PME# disabled
[    0.627996] pci 0000:00:1c.0: [8086:9dbc] type 01 class 0x060400
[    0.628068] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.628069] pci 0000:00:1c.0: PME# disabled
[    0.628083] pci 0000:00:1c.0: PTM enabled (root), 4dns granularity
[    0.628228] pci 0000:00:1c.6: [8086:9dbe] type 01 class 0x060400
[    0.628299] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.628301] pci 0000:00:1c.6: PME# disabled
[    0.628314] pci 0000:00:1c.6: PTM enabled (root), 4dns granularity
[    0.628430] pci 0000:00:1d.0: [8086:9db0] type 01 class 0x060400
[    0.628530] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.628533] pci 0000:00:1d.0: PME# disabled
[    0.628545] pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
[    0.628691] pci 0000:00:1d.4: [8086:9db4] type 01 class 0x060400
[    0.628772] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[    0.628774] pci 0000:00:1d.4: PME# disabled
[    0.628789] pci 0000:00:1d.4: PTM enabled (root), 4dns granularity
[    0.628917] pci 0000:00:1f.0: [8086:9d84] type 00 class 0x060100
[    0.629079] pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040380
[    0.629119] pci 0000:00:1f.3: reg 0x10: [mem 0xdc518000-0xdc51bfff 64bit]
[    0.629155] pci 0000:00:1f.3: reg 0x20: [mem 0xdc200000-0xdc2fffff 64bit]
[    0.629229] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.629235] pci 0000:00:1f.3: PME# disabled
[    0.629376] pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500
[    0.629402] pci 0000:00:1f.4: reg 0x10: [mem 0xdc51e000-0xdc51e0ff 64bit]
[    0.629429] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.629549] pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000
[    0.629563] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.629670] pci_bus 0000:00: fixups for bus
[    0.629672] pci 0000:00:1c.0: scanning [bus 01-01] behind bridge, pass 0
[    0.629741] pci_bus 0000:01: scanning bus
[    0.629755] pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000
[    0.629784] pci 0000:01:00.0: reg 0x14: [mem 0xdc400000-0xdc400fff]
[    0.629881] pci 0000:01:00.0: supports D1 D2
[    0.629882] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.629885] pci 0000:01:00.0: PME# disabled
[    0.629996] pci_bus 0000:01: fixups for bus
[    0.629997] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.630000] pci 0000:00:1c.0:   bridge window [mem 0xdc400000-0xdc4fffff]
[    0.630004] pci_bus 0000:01: bus scan returning with max=01
[    0.630006] pci 0000:00:1c.6: scanning [bus 02-02] behind bridge, pass 0
[    0.630216] pci_bus 0000:02: scanning bus
[    0.630328] pci 0000:02:00.0: [168c:003e] type 00 class 0x028000
[    0.630653] pci 0000:02:00.0: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit]
[    0.631667] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.631768] pci 0000:02:00.0: PME# disabled
[    0.632813] pci_bus 0000:02: fixups for bus
[    0.632814] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    0.632817] pci 0000:00:1c.6:   bridge window [mem 0xdc000000-0xdc1fffff]
[    0.632820] pci_bus 0000:02: bus scan returning with max=02
[    0.632822] pci 0000:00:1d.0: scanning [bus 03-6d] behind bridge, pass 0
[    0.632891] pci_bus 0000:03: scanning bus
[    0.632904] pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400
[    0.632960] pci 0000:03:00.0: enabling Extended Tags
[    0.633033] pci 0000:03:00.0: supports D1 D2
[    0.633034] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.633037] pci 0000:03:00.0: PME# disabled
[    0.633133] pci_bus 0000:03: fixups for bus
[    0.633134] pci 0000:00:1d.0: PCI bridge to [bus 03-6d]
[    0.633137] pci 0000:00:1d.0:   bridge window [mem 0xac000000-0xda0fffff]
[    0.633140] pci 0000:00:1d.0:   bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[    0.633142] pci 0000:03:00.0: scanning [bus 04-6d] behind bridge, pass 0
[    0.633179] pci_bus 0000:04: scanning bus
[    0.633192] pci 0000:04:00.0: [8086:15d3] type 01 class 0x060400
[    0.633251] pci 0000:04:00.0: enabling Extended Tags
[    0.633329] pci 0000:04:00.0: supports D1 D2
[    0.633329] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.633332] pci 0000:04:00.0: PME# disabled
[    0.633402] pci 0000:04:01.0: [8086:15d3] type 01 class 0x060400
[    0.633461] pci 0000:04:01.0: enabling Extended Tags
[    0.633539] pci 0000:04:01.0: supports D1 D2
[    0.633540] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.633543] pci 0000:04:01.0: PME# disabled
[    0.633612] pci 0000:04:02.0: [8086:15d3] type 01 class 0x060400
[    0.633671] pci 0000:04:02.0: enabling Extended Tags
[    0.633746] pci 0000:04:02.0: supports D1 D2
[    0.633746] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.633749] pci 0000:04:02.0: PME# disabled
[    0.633827] pci 0000:04:04.0: [8086:15d3] type 01 class 0x060400
[    0.633886] pci 0000:04:04.0: enabling Extended Tags
[    0.633965] pci 0000:04:04.0: supports D1 D2
[    0.633965] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.633968] pci 0000:04:04.0: PME# disabled
[    0.634056] pci_bus 0000:04: fixups for bus
[    0.634056] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[    0.634063] pci 0000:03:00.0:   bridge window [mem 0xac000000-0xda0fffff]
[    0.634068] pci 0000:03:00.0:   bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[    0.634070] pci 0000:04:00.0: scanning [bus 05-05] behind bridge, pass 0
[    0.634100] pci_bus 0000:05: scanning bus
[    0.634115] pci 0000:05:00.0: [8086:15d2] type 00 class 0x088000
[    0.634145] pci 0000:05:00.0: reg 0x10: [mem 0xda000000-0xda03ffff]
[    0.634155] pci 0000:05:00.0: reg 0x14: [mem 0xda040000-0xda040fff]
[    0.634210] pci 0000:05:00.0: enabling Extended Tags
[    0.634303] pci 0000:05:00.0: supports D1 D2
[    0.634304] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.634307] pci 0000:05:00.0: PME# disabled
[    0.634431] pci_bus 0000:05: fixups for bus
[    0.634431] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.634439] pci 0000:04:00.0:   bridge window [mem 0xda000000-0xda0fffff]
[    0.634443] pci_bus 0000:05: bus scan returning with max=05
[    0.634447] pci 0000:04:01.0: scanning [bus 06-38] behind bridge, pass 0
[    0.634476] pci_bus 0000:06: scanning bus
[    0.634477] pci_bus 0000:06: fixups for bus
[    0.634478] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[    0.634485] pci 0000:04:01.0:   bridge window [mem 0xac000000-0xc3efffff]
[    0.634490] pci 0000:04:01.0:   bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[    0.634490] pci_bus 0000:06: bus scan returning with max=06
[    0.634493] pci 0000:04:02.0: scanning [bus 39-39] behind bridge, pass 0
[    0.634533] pci_bus 0000:39: scanning bus
[    0.634549] pci 0000:39:00.0: [8086:15d4] type 00 class 0x0c0330
[    0.634582] pci 0000:39:00.0: reg 0x10: [mem 0xc3f00000-0xc3f0ffff]
[    0.634653] pci 0000:39:00.0: enabling Extended Tags
[    0.634751] pci 0000:39:00.0: supports D1 D2
[    0.634751] pci 0000:39:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.634755] pci 0000:39:00.0: PME# disabled
[    0.634811] pci 0000:39:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:04:02.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
[    0.634897] pci_bus 0000:39: fixups for bus
[    0.634897] pci 0000:04:02.0: PCI bridge to [bus 39]
[    0.634904] pci 0000:04:02.0:   bridge window [mem 0xc3f00000-0xc3ffffff]
[    0.634909] pci_bus 0000:39: bus scan returning with max=39
[    0.634912] pci 0000:04:04.0: scanning [bus 3a-6d] behind bridge, pass 0
[    0.634942] pci_bus 0000:3a: scanning bus
[    0.634944] pci_bus 0000:3a: fixups for bus
[    0.634945] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[    0.634952] pci 0000:04:04.0:   bridge window [mem 0xc4000000-0xd9ffffff]
[    0.634957] pci 0000:04:04.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[    0.634957] pci_bus 0000:3a: bus scan returning with max=3a
[    0.634960] pci 0000:04:00.0: scanning [bus 05-05] behind bridge, pass 1
[    0.634965] pci 0000:04:01.0: scanning [bus 06-38] behind bridge, pass 1
[    0.634970] pci 0000:04:02.0: scanning [bus 39-39] behind bridge, pass 1
[    0.634975] pci 0000:04:04.0: scanning [bus 3a-6d] behind bridge, pass 1
[    0.634979] pci_bus 0000:04: bus scan returning with max=6d
[    0.634982] pci 0000:03:00.0: scanning [bus 04-6d] behind bridge, pass 1
[    0.634986] pci_bus 0000:03: bus scan returning with max=6d
[    0.634989] pci 0000:00:1d.4: scanning [bus 6e-6e] behind bridge, pass 0
[    0.635179] pci_bus 0000:6e: scanning bus
[    0.635188] pci 0000:6e:00.0: [1344:5410] type 00 class 0x010802
[    0.635212] pci 0000:6e:00.0: reg 0x10: [mem 0xdc300000-0xdc303fff 64bit]
[    0.635505] pci_bus 0000:6e: fixups for bus
[    0.635505] pci 0000:00:1d.4: PCI bridge to [bus 6e]
[    0.635508] pci 0000:00:1d.4:   bridge window [mem 0xdc300000-0xdc3fffff]
[    0.635511] pci_bus 0000:6e: bus scan returning with max=6e
[    0.635514] pci 0000:00:1c.0: scanning [bus 01-01] behind bridge, pass 1
[    0.635517] pci 0000:00:1c.6: scanning [bus 02-02] behind bridge, pass 1
[    0.635521] pci 0000:00:1d.0: scanning [bus 03-6d] behind bridge, pass 1
[    0.635530] pci 0000:00:1d.4: scanning [bus 6e-6e] behind bridge, pass 1
[    0.635533] pci_bus 0000:00: bus scan returning with max=6e
[    0.638748] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.638802] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
[    0.638855] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.638908] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.638961] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.639013] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.639066] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.639118] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.649209] ACPI: EC: interrupt unblocked
[    0.649218] ACPI: EC: event unblocked
[    0.649236] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.649237] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions and events
[    0.649294] iommu: Default domain type: Translated 
[    0.649306] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.649306] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.649306] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.649306] vgaarb: loaded
[    0.649306] EDAC MC: Ver: 3.0.0
[    0.649306] Registered efivars operations
[    0.649306] PCI: Using ACPI for IRQ routing
[    0.681889] PCI: pci_cache_line_size set to 64 bytes
[    0.681894] pci 0000:00:02.0: BAR 0: reserving [mem 0xdb000000-0xdbffffff flags 0x140204] (d=0, p=0)
[    0.681895] pci 0000:00:02.0: BAR 2: reserving [mem 0x50000000-0x5fffffff flags 0x14220c] (d=0, p=0)
[    0.681896] pci 0000:00:02.0: BAR 4: reserving [io  0x3000-0x303f flags 0x40101] (d=0, p=0)
[    0.681902] pci 0000:00:12.0: BAR 0: reserving [mem 0xdc523000-0xdc523fff flags 0x140204] (d=0, p=0)
[    0.681908] pci 0000:00:14.0: BAR 0: reserving [mem 0xdc500000-0xdc50ffff flags 0x140204] (d=0, p=0)
[    0.682098] pci 0000:05:00.0: BAR 0: reserving [mem 0xda000000-0xda03ffff flags 0x40200] (d=0, p=0)
[    0.682099] pci 0000:05:00.0: BAR 1: reserving [mem 0xda040000-0xda040fff flags 0x40200] (d=0, p=0)
[    0.682104] pci 0000:39:00.0: BAR 0: reserving [mem 0xc3f00000-0xc3f0ffff flags 0x40200] (d=0, p=0)
[    0.682227] pci 0000:6e:00.0: BAR 0: reserving [mem 0xdc300000-0xdc303fff flags 0x140204] (d=0, p=0)
[    0.682238] pci 0000:00:1f.4: BAR 0: reserving [mem 0xdc51e000-0xdc51e0ff flags 0x140204] (d=0, p=0)
[    0.682239] pci 0000:00:1f.4: BAR 4: reserving [io  0xefa0-0xefbf flags 0x40101] (d=0, p=0)
[    0.682241] pci 0000:00:1f.5: BAR 0: reserving [mem 0xfe010000-0xfe010fff flags 0x40200] (d=0, p=0)
[    0.682243] pci 0000:00:04.0: BAR 0: reserving [mem 0xdc510000-0xdc517fff flags 0x140204] (d=1, p=1)
[    0.682244] pci 0000:00:08.0: BAR 0: reserving [mem 0xdc524000-0xdc524fff flags 0x140204] (d=1, p=1)
[    0.682252] pci 0000:00:14.2: BAR 0: reserving [mem 0xdc51c000-0xdc51dfff flags 0x140204] (d=1, p=1)
[    0.682253] pci 0000:00:14.2: BAR 2: reserving [mem 0xdc522000-0xdc522fff flags 0x140204] (d=1, p=1)
[    0.682290] pci 0000:00:16.0: BAR 0: reserving [mem 0xdc51f000-0xdc51ffff flags 0x140204] (d=1, p=1)
[    0.682293] pci 0000:01:00.0: BAR 1: reserving [mem 0xdc400000-0xdc400fff flags 0x40200] (d=1, p=1)
[    0.682436] pci 0000:02:00.0: BAR 0: reserving [mem 0xdc000000-0xdc1fffff flags 0x140204] (d=1, p=1)
[    0.682572] pci 0000:00:1f.3: BAR 0: reserving [mem 0xdc518000-0xdc51bfff flags 0x140204] (d=1, p=1)
[    0.682572] pci 0000:00:1f.3: BAR 4: reserving [mem 0xdc200000-0xdc2fffff flags 0x140204] (d=1, p=1)
[    0.682583] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.682584] e820: reserve RAM buffer [mem 0x2a059000-0x2bffffff]
[    0.682584] e820: reserve RAM buffer [mem 0x3a927000-0x3bffffff]
[    0.682585] e820: reserve RAM buffer [mem 0x48e00000-0x4bffffff]
[    0.682585] e820: reserve RAM buffer [mem 0x4ae800000-0x4afffffff]
[    0.682818] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.682820] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.686742] clocksource: Switched to clocksource tsc-early
[    0.690109] VFS: Disk quotas dquot_6.6.0
[    0.690109] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.690109] AppArmor: AppArmor Filesystem Enabled
[    0.690109] pnp: PnP ACPI init
[    0.690109] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
[    0.690109] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.690109] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.690109] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.690109] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.690109] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.690109] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.690109] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.690109] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.690109] pnp 00:05: Plug and Play ACPI device, IDs DLL08af PNP0f13 (active)
[    0.690109] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.690109] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.690109] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.690109] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.690109] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.690109] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.690109] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.690109] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.690109] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.690109] system 00:07: [io  0x1800-0x18fe] could not be reserved
[    0.690109] system 00:07: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.690109] system 00:07: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.690109] system 00:07: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.690109] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.690109] system 00:07: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.690109] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.690109] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.690109] system 00:08: [io  0x2000-0x20fe] has been reserved
[    0.690109] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.691746] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.697106] pnp: PnP ACPI: found 10 devices
[    0.697792] thermal_sys: Registered thermal governor 'fair_share'
[    0.697793] thermal_sys: Registered thermal governor 'bang_bang'
[    0.697793] thermal_sys: Registered thermal governor 'step_wise'
[    0.697793] thermal_sys: Registered thermal governor 'user_space'
[    0.702278] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.702298] pci 0000:04:01.0: bridge window [io  0x1000-0x0fff] to [bus 06-38] add_size 1000
[    0.702299] pci 0000:04:04.0: bridge window [io  0x1000-0x0fff] to [bus 3a-6d] add_size 1000
[    0.702300] pci 0000:03:00.0: bridge window [io  0x1000-0x0fff] to [bus 04-6d] add_size 2000
[    0.702301] pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 03-6d] add_size 3000
[    0.702308] pci 0000:00:15.0: BAR 0: assigned [mem 0x4f800000-0x4f800fff 64bit]
[    0.702364] pci 0000:00:15.1: BAR 0: assigned [mem 0x4f801000-0x4f801fff 64bit]
[    0.702411] pci 0000:00:1d.0: BAR 13: assigned [io  0x4000-0x6fff]
[    0.702413] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.702415] pci 0000:00:1c.0:   bridge window [mem 0xdc400000-0xdc4fffff]
[    0.702419] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    0.702422] pci 0000:00:1c.6:   bridge window [mem 0xdc000000-0xdc1fffff]
[    0.702426] pci 0000:03:00.0: BAR 13: assigned [io  0x4000-0x5fff]
[    0.702428] pci 0000:04:01.0: BAR 13: assigned [io  0x4000-0x4fff]
[    0.702428] pci 0000:04:04.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.702429] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.702433] pci 0000:04:00.0:   bridge window [mem 0xda000000-0xda0fffff]
[    0.702440] pci 0000:04:01.0: PCI bridge to [bus 06-38]
[    0.702442] pci 0000:04:01.0:   bridge window [io  0x4000-0x4fff]
[    0.702446] pci 0000:04:01.0:   bridge window [mem 0xac000000-0xc3efffff]
[    0.702449] pci 0000:04:01.0:   bridge window [mem 0x60000000-0x7fffffff 64bit pref]
[    0.702453] pci 0000:04:02.0: PCI bridge to [bus 39]
[    0.702457] pci 0000:04:02.0:   bridge window [mem 0xc3f00000-0xc3ffffff]
[    0.702464] pci 0000:04:04.0: PCI bridge to [bus 3a-6d]
[    0.702466] pci 0000:04:04.0:   bridge window [io  0x5000-0x5fff]
[    0.702470] pci 0000:04:04.0:   bridge window [mem 0xc4000000-0xd9ffffff]
[    0.702473] pci 0000:04:04.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[    0.702478] pci 0000:03:00.0: PCI bridge to [bus 04-6d]
[    0.702479] pci 0000:03:00.0:   bridge window [io  0x4000-0x5fff]
[    0.702483] pci 0000:03:00.0:   bridge window [mem 0xac000000-0xda0fffff]
[    0.702486] pci 0000:03:00.0:   bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[    0.702490] pci 0000:00:1d.0: PCI bridge to [bus 03-6d]
[    0.702491] pci 0000:00:1d.0:   bridge window [io  0x4000-0x6fff]
[    0.702494] pci 0000:00:1d.0:   bridge window [mem 0xac000000-0xda0fffff]
[    0.702496] pci 0000:00:1d.0:   bridge window [mem 0x60000000-0xa9ffffff 64bit pref]
[    0.702499] pci 0000:00:1d.4: PCI bridge to [bus 6e]
[    0.702503] pci 0000:00:1d.4:   bridge window [mem 0xdc300000-0xdc3fffff]
[    0.702507] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.702508] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.702509] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.702509] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.702510] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.702511] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.702511] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.702512] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.702512] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.702513] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.702514] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.702514] pci_bus 0000:00: resource 15 [mem 0x4f800000-0xdfffffff window]
[    0.702515] pci_bus 0000:00: resource 16 [mem 0xfc800000-0xfe7fffff window]
[    0.702516] pci_bus 0000:01: resource 1 [mem 0xdc400000-0xdc4fffff]
[    0.702516] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xdc1fffff]
[    0.702517] pci_bus 0000:03: resource 0 [io  0x4000-0x6fff]
[    0.702517] pci_bus 0000:03: resource 1 [mem 0xac000000-0xda0fffff]
[    0.702518] pci_bus 0000:03: resource 2 [mem 0x60000000-0xa9ffffff 64bit pref]
[    0.702519] pci_bus 0000:04: resource 0 [io  0x4000-0x5fff]
[    0.702519] pci_bus 0000:04: resource 1 [mem 0xac000000-0xda0fffff]
[    0.702520] pci_bus 0000:04: resource 2 [mem 0x60000000-0xa9ffffff 64bit pref]
[    0.702520] pci_bus 0000:05: resource 1 [mem 0xda000000-0xda0fffff]
[    0.702521] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    0.702521] pci_bus 0000:06: resource 1 [mem 0xac000000-0xc3efffff]
[    0.702522] pci_bus 0000:06: resource 2 [mem 0x60000000-0x7fffffff 64bit pref]
[    0.702523] pci_bus 0000:39: resource 1 [mem 0xc3f00000-0xc3ffffff]
[    0.702523] pci_bus 0000:3a: resource 0 [io  0x5000-0x5fff]
[    0.702524] pci_bus 0000:3a: resource 1 [mem 0xc4000000-0xd9ffffff]
[    0.702524] pci_bus 0000:3a: resource 2 [mem 0x80000000-0xa9ffffff 64bit pref]
[    0.702525] pci_bus 0000:6e: resource 1 [mem 0xdc300000-0xdc3fffff]
[    0.702615] NET: Registered protocol family 2
[    0.702695] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.702713] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.702864] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.703003] TCP: Hash tables configured (established 131072 bind 65536)
[    0.703024] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.703059] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.703119] NET: Registered protocol family 1
[    0.703122] NET: Registered protocol family 44
[    0.703128] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.703560] pci 0000:03:00.0: CLS mismatch (64 != 128), using 64 bytes
[    0.703632] pci 0000:03:00.0: enabling device (0006 -> 0007)
[    0.704272] Trying to unpack rootfs image as initramfs...
[    1.911845] Freeing initrd memory: 17316K
[    1.927709] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.927711] software IO TLB: mapped [mem 0x2ff0b000-0x33f0b000] (64MB)
[    1.928372] Initialise system trusted keyrings
[    1.928385] Key type blacklist registered
[    1.928434] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    1.929887] zbud: loaded
[    1.930091] Platform Keyring initialized
[    1.930093] Key type asymmetric registered
[    1.930094] Asymmetric key parser 'x509' registered
[    1.930101] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.930164] io scheduler mq-deadline registered
[    1.932320] pcieport 0000:00:1c.0: runtime IRQ mapping not provided by arch
[    1.932574] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[    1.932638] pcieport 0000:00:1c.6: runtime IRQ mapping not provided by arch
[    1.932806] pcieport 0000:00:1c.6: PME: Signaling with IRQ 123
[    1.932862] pcieport 0000:00:1d.0: runtime IRQ mapping not provided by arch
[    1.932913] pcieport 0000:00:1d.0: PME: Signaling with IRQ 124
[    1.932934] pcieport 0000:00:1d.0: pciehp: Slot #12 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.932939] pci_bus 0000:03: dev 00, created physical slot 12
[    1.933026] pcieport 0000:00:1d.4: runtime IRQ mapping not provided by arch
[    1.933204] pcieport 0000:00:1d.4: PME: Signaling with IRQ 125
[    1.933262] pcieport 0000:03:00.0: runtime IRQ mapping not provided by arch
[    1.933338] pcieport 0000:04:00.0: runtime IRQ mapping not provided by arch
[    1.933524] pcieport 0000:04:01.0: runtime IRQ mapping not provided by arch
[    1.933528] pcieport 0000:04:01.0: enabling device (0006 -> 0007)
[    1.933658] pcieport 0000:04:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.933661] pci_bus 0000:06: dev 00, created physical slot 1
[    1.933788] pcieport 0000:04:02.0: runtime IRQ mapping not provided by arch
[    1.933906] pcieport 0000:04:04.0: runtime IRQ mapping not provided by arch
[    1.933910] pcieport 0000:04:04.0: enabling device (0006 -> 0007)
[    1.934024] pcieport 0000:04:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.934027] pci_bus 0000:3a: dev 00, created physical slot 4
[    1.934157] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.934172] efifb: probing for efifb
[    1.934183] efifb: framebuffer at 0x50000000, using 8128k, total 8128k
[    1.934184] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    1.934184] efifb: scrolling: redraw
[    1.934186] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.934265] Console: switching to colour frame buffer device 240x67
[    1.937842] fb0: EFI VGA frame buffer device
[    1.937848] intel_idle: MWAIT substates: 0x11142120
[    1.937849] intel_idle: v0.4.1 model 0x8E
[    1.938243] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.940599] thermal LNXTHERM:00: registered as thermal_zone0
[    1.940600] ACPI: Thermal Zone [THM] (25 C)
[    1.940687] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.941143] Linux agpgart interface v0.103
[    1.941192] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.941192] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    1.941484] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.942179] i8042: Warning: Keylock active
[    1.943806] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.943809] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.943878] mousedev: PS/2 mouse device common for all mice
[    1.943933] rtc_cmos 00:02: RTC can wake from S4
[    1.944675] rtc_cmos 00:02: registered as rtc0
[    1.944684] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram
[    1.944689] intel_pstate: Intel P-state driver initializing
[    1.944999] intel_pstate: HWP enabled
[    1.945106] ledtrig-cpu: registered to indicate activity on CPUs
[    1.945112] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.945322] drop_monitor: Initializing network drop monitor service
[    1.945470] NET: Registered protocol family 10
[    1.951454] Segment Routing with IPv6
[    1.951465] mip6: Mobile IPv6
[    1.951466] NET: Registered protocol family 17
[    1.951582] mpls_gso: MPLS GSO support
[    1.952070] microcode: sig=0x806ec, pf=0x80, revision=0xca
[    1.952264] microcode: Microcode Update Driver: v2.2.
[    1.952266] IPI shorthand broadcast: enabled
[    1.952271] sched_clock: Marking stable (1947589899, 4405865)->(1968096622, -16100858)
[    1.952533] registered taskstats version 1
[    1.952534] Loading compiled-in X.509 certificates
[    1.952547] zswap: loaded using pool lzo/zbud
[    1.952722] Key type ._fscrypt registered
[    1.952723] Key type .fscrypt registered
[    1.952733] AppArmor: AppArmor sha1 policy hashing enabled
[    1.953792] integrity: Loading X.509 certificate: UEFI:db
[    1.953814] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
[    1.953814] integrity: Loading X.509 certificate: UEFI:db
[    1.953825] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    1.953826] integrity: Loading X.509 certificate: UEFI:db
[    1.953836] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    1.954183] Couldn't get size: 0x800000000000000e
[    1.954195] Couldn't get UEFI MokListRT
[    1.955951] rtc_cmos 00:02: setting system clock to 2019-11-19T11:18:17 UTC (1574162297)
[    1.956570] Freeing unused kernel image memory: 1660K
[    1.995902] Write protecting the kernel read-only data: 16384k
[    1.996425] Freeing unused kernel image memory: 2036K
[    1.996630] Freeing unused kernel image memory: 644K
[    2.002707] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.002709] Run /init as init process
[    2.058885] pcieport 0000:04:01.0: PME# enabled
[    2.058971] pcieport 0000:04:04.0: PME# enabled
[    2.104613] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    2.104854] ACPI: Lid Switch [LID0]
[    2.104928] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    2.104954] ACPI: Power Button [PBTN]
[    2.104987] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[    2.105003] ACPI: Sleep Button [SBTN]
[    2.105187] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    2.105237] wmi_bus wmi_bus-PNP0C14:03: WQBC data block query control method not found
[    2.105238] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    2.107224] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    2.108342] ACPI: bus type USB registered
[    2.108356] usbcore: registered new interface driver usbfs
[    2.108361] usbcore: registered new interface driver hub
[    2.108383] usbcore: registered new device driver usb
[    2.110954] xhci_hcd 0000:00:14.0: runtime IRQ mapping not provided by arch
[    2.111696] xhci_hcd 0000:00:14.0: enabling bus mastering
[    2.111702] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.111707] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.112796] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    2.112801] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.112990] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    2.112991] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.112992] usb usb1: Product: xHCI Host Controller
[    2.112993] usb usb1: Manufacturer: Linux 5.4.0-rc8 xhci-hcd
[    2.112994] usb usb1: SerialNumber: 0000:00:14.0
[    2.115349] cryptd: max_cpu_qlen set to 1000
[    2.115749] hub 1-0:1.0: USB hub found
[    2.115767] hub 1-0:1.0: 12 ports detected
[    2.116640] AVX2 version of gcm_enc/dec engaged.
[    2.116641] AES CTR mode by8 optimization enabled
[    2.117093] nvme 0000:6e:00.0: runtime IRQ mapping not provided by arch
[    2.117184] nvme nvme0: pci function 0000:6e:00.0
[    2.120184] acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    2.120777] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.120781] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.120785] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    2.120821] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    2.120822] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.120823] usb usb2: Product: xHCI Host Controller
[    2.120824] usb usb2: Manufacturer: Linux 5.4.0-rc8 xhci-hcd
[    2.120825] usb usb2: SerialNumber: 0000:00:14.0
[    2.120931] hub 2-0:1.0: USB hub found
[    2.120943] hub 2-0:1.0: 6 ports detected
[    2.121256] usb: port power management may be unreliable
[    2.121583] xhci_hcd 0000:39:00.0: runtime IRQ mapping not provided by arch
[    2.121680] xhci_hcd 0000:39:00.0: enabling bus mastering
[    2.121683] xhci_hcd 0000:39:00.0: xHCI Host Controller
[    2.121687] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 3
[    2.122814] xhci_hcd 0000:39:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[    2.122819] xhci_hcd 0000:39:00.0: enabling Mem-Wr-Inval
[    2.123036] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    2.123038] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.123039] usb usb3: Product: xHCI Host Controller
[    2.123040] usb usb3: Manufacturer: Linux 5.4.0-rc8 xhci-hcd
[    2.123041] usb usb3: SerialNumber: 0000:39:00.0
[    2.123133] hub 3-0:1.0: USB hub found
[    2.123140] hub 3-0:1.0: 2 ports detected
[    2.123519] xhci_hcd 0000:39:00.0: xHCI Host Controller
[    2.123522] xhci_hcd 0000:39:00.0: new USB bus registered, assigned bus number 4
[    2.123524] xhci_hcd 0000:39:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    2.123552] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    2.123553] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.123554] usb usb4: Product: xHCI Host Controller
[    2.123555] usb usb4: Manufacturer: Linux 5.4.0-rc8 xhci-hcd
[    2.123556] usb usb4: SerialNumber: 0000:39:00.0
[    2.123640] hub 4-0:1.0: USB hub found
[    2.123647] hub 4-0:1.0: 2 ports detected
[    2.131314] i915 0000:00:02.0: runtime IRQ mapping not provided by arch
[    2.132029] checking generic (50000000 7f0000) vs hw (50000000 10000000)
[    2.132030] fb0: switching to inteldrmfb from EFI VGA
[    2.132093] Console: switching to colour dummy device 80x25
[    2.132114] i915 0000:00:02.0: vgaarb: deactivate vga console
[    2.133493] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.133494] [drm] Driver supports precise vblank timestamp query.
[    2.134278] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.134828] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    2.164824] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[    2.178187] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.178866] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    2.180281] fbcon: i915drmfb (fb0) is primary device
[    2.232044] xhci_hcd 0000:39:00.0: PME# enabled
[    2.251823] pcieport 0000:04:02.0: PME# enabled
[    2.385041] nvme nvme0: 8/0/0 default/read/poll queues
[    2.392788]  nvme0n1: p1 p2 p3
[    2.455717] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[    2.620661] usb 1-5: New USB device found, idVendor=0c45, idProduct=6723, bcdDevice=80.08
[    2.620663] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.620666] usb 1-5: Product: Integrated_Webcam_HD
[    2.620667] usb 1-5: Manufacturer: CN09357G8LG0096MAD4KA01
[    2.747746] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    2.896674] usb 1-7: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping
[    2.896677] usb 1-7: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping
[    2.896683] usb 1-7: New USB device found, idVendor=0489, idProduct=e0a2, bcdDevice= 0.01
[    2.896685] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.922526] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734]
[    2.939707] tsc: Refined TSC clocksource calibration: 1991.996 MHz
[    2.939719] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d4a59358, max_idle_ns: 881590518684 ns
[    2.939804] clocksource: Switched to clocksource tsc
[    2.950318] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..]
[    2.950325] psmouse serio1: synaptics: Your touchpad (PNP: DLL08af PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    3.005848] psmouse serio1: synaptics: Touchpad model: 1, fw: 9.16, id: 0x1e2a1, caps: 0xf00323/0x840300/0x12e800/0x500000, board id: 3038, fw id: 2767034
[    3.040459] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    3.300756] Console: switching to colour frame buffer device 240x67
[    3.324353] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    3.398789] device-mapper: uevent: version 1.0.3
[    3.398921] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[   10.002973] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[   10.004284] XFS (dm-0): Mounting V5 Filesystem
[   10.079334] XFS (dm-0): Starting recovery (logdev: internal)
[   10.127743] XFS (dm-0): Ending recovery (logdev: internal)
[   10.157530] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[   10.225069] systemd[1]: Inserted module 'autofs4'
[   10.309589] systemd[1]: systemd 243-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   10.327983] systemd[1]: Detected architecture x86-64.
[   10.361048] systemd[1]: Set hostname to <hassler>.
[   10.504419] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[   10.540459] systemd[1]: Created slice system-getty.slice.
[   10.540657] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[   10.540821] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   10.541030] systemd[1]: Created slice User and Session Slice.
[   10.541075] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.541294] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.556517] xfs filesystem being remounted at / supports timestamps until 2038 (0x7fffffff)
[   10.558503] lp: driver loaded but no devices found
[   10.560582] ppdev: user-space parallel port driver
[   10.659193] input: Intel HID events as /devices/platform/INT33D5:00/input/input7
[   10.659561] intel-hid INT33D5:00: platform supports 5 button array
[   10.659587] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input8
[   10.662604] ACPI: AC Adapter [AC] (off-line)
[   10.674054] tpm_tis MSFT0101:00: IRQ index 0 not found
[   10.701893] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1)
[   10.752982] hidraw: raw HID events driver (C) Jiri Kosina
[   10.766713] proc_thermal 0000:00:04.0: runtime IRQ mapping not provided by arch
[   10.766718] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[   10.768703] intel_pch_thermal 0000:00:12.0: runtime IRQ mapping not provided by arch
[   10.771996] intel-lpss 0000:00:15.0: runtime IRQ mapping not provided by arch
[   10.775189] intel-lpss 0000:00:15.0: power state changed by ACPI to D0
[   10.775201] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[   10.775334] intel-lpss 0000:00:15.0: enabling bus mastering
[   10.775353] intel-lpss 0000:00:15.0: enabling Mem-Wr-Inval
[   10.775879] idma64 idma64.0: Found Intel integrated DMA 64-bit
[   10.776372] intel-lpss 0000:00:15.1: runtime IRQ mapping not provided by arch
[   10.777339] intel-lpss 0000:00:15.1: power state changed by ACPI to D0
[   10.777352] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[   10.777449] intel-lpss 0000:00:15.1: enabling bus mastering
[   10.777465] intel-lpss 0000:00:15.1: enabling Mem-Wr-Inval
[   10.777563] idma64 idma64.1: Found Intel integrated DMA 64-bit
[   10.794696] intel_rapl_common: Found RAPL domain package
[   10.794697] intel_rapl_common: Found RAPL domain dram
[   10.794954] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[   10.798549] intel-lpss 0000:00:15.0: power state changed by ACPI to D3cold
[   10.799110] intel-lpss 0000:00:15.1: power state changed by ACPI to D3cold
[   10.836188] battery: ACPI: Battery Slot [BAT0] (battery present)
[   10.857385] rtsx_pci 0000:01:00.0: runtime IRQ mapping not provided by arch
[   10.857396] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
[   10.857766] rtsx_pci 0000:01:00.0: enabling bus mastering
[   10.891014] XFS (nvme0n1p2): Mounting V5 Filesystem
[   10.895306] systemd-journald[494]: Received client request to flush runtime journal.
[   10.909727] mc: Linux media interface: v0.10
[   10.916350] thunderbolt 0000:05:00.0: runtime IRQ mapping not provided by arch
[   10.918838] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   10.918962] mei_me 0000:00:16.0: runtime IRQ mapping not provided by arch
[   10.918971] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   10.919108] mei_me 0000:00:16.0: enabling bus mastering
[   10.921449] videodev: Linux video capture interface: v2.00
[   10.921846] i801_smbus 0000:00:1f.4: runtime IRQ mapping not provided by arch
[   10.922440] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   10.922501] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   10.925740] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[   10.929260] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6723)
[   10.929612] input: Dell WMI hotkeys as /devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9
[   10.930910] snd_hda_intel 0000:00:1f.3: runtime IRQ mapping not provided by arch
[   10.930923] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   10.931294] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   10.934414] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[   10.934416] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[   10.934418] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[   10.934419] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[   10.934490] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input10
[   10.934555] usbcore: registered new interface driver uvcvideo
[   10.934556] USB Video Class driver (1.1.1)
[   10.935781] snd_hda_intel 0000:00:1f.3: enabling bus mastering
[   10.955208] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   10.955579] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   10.955581] cfg80211: failed to load regulatory.db
[   11.027870] EFI Variables Facility v0.08 2004-May-17
[   11.027928] input: PC Speaker as /devices/platform/pcspkr/input/input11
[   11.031517] Error: Driver 'pcspkr' is already registered, aborting...
[   11.032476] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[   11.032477] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   11.032477] RAPL PMU: hw unit of domain package 2^-14 Joules
[   11.032478] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   11.032478] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   11.032479] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   11.045308] Bluetooth: Core ver 2.22
[   11.045320] NET: Registered protocol family 31
[   11.045321] Bluetooth: HCI device and connection manager initialized
[   11.045325] Bluetooth: HCI socket layer initialized
[   11.045327] Bluetooth: L2CAP socket layer initialized
[   11.045329] Bluetooth: SCO socket layer initialized
[   11.046977] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3271: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[   11.046979] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.046980] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   11.046981] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.046982] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.046983] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[   11.046985] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1b
[   11.046986] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   11.052586] skl_uncore 0000:00:00.0: runtime IRQ mapping not provided by arch
[   11.168579] usbcore: registered new interface driver btusb
[   11.171319] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
[   11.171320] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111
[   11.197871] ath10k_pci 0000:02:00.0: runtime IRQ mapping not provided by arch
[   11.197894] pstore: Using crash dump compression: deflate
[   11.197915] pstore: Registered efi as persistent store backend
[   11.198456] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[   11.198929] ath10k_pci 0000:02:00.0: enabling bus mastering
[   11.202379] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   11.207551] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   11.207586] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   11.207616] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[   11.207644] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[   11.207683] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[   11.207715] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[   11.226218] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
[   11.310098] intel_rapl_common: Found RAPL domain package
[   11.310099] intel_rapl_common: Found RAPL domain core
[   11.310100] intel_rapl_common: Found RAPL domain uncore
[   11.310101] intel_rapl_common: Found RAPL domain dram
[   11.313311] intel-lpss 0000:00:15.0: power state changed by ACPI to D0
[   11.313366] intel-lpss 0000:00:15.0: restoring config space at offset 0x10 (was 0x4, writing 0x4f800004)
[   11.449509] iTCO_vendor_support: vendor-support=0
[   11.450288] intel-lpss 0000:00:15.1: power state changed by ACPI to D0
[   11.450327] intel-lpss 0000:00:15.1: restoring config space at offset 0x10 (was 0x4, writing 0x4f801004)
[   11.450962] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.451235] iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[   11.451361] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.461720] intel-lpss 0000:00:15.0: power state changed by ACPI to D3cold
[   11.486195] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:143a
[   11.486197] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[   11.486640] ath10k_pci 0000:02:00.0: firmware ver RM.4.4.1.c2-00057-QCARMSWP-1 api 6 features wowlan,ignore-otp,no-4addr-pad,raw-mode crc32 e061250a
[   11.556737] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 4ed3569e
[   11.626519] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
[   11.633814] i2c_hid i2c-DELL08AF:00: i2c-DELL08AF:00 supply vdd not found, using dummy regulator
[   11.633822] i2c_hid i2c-DELL08AF:00: i2c-DELL08AF:00 supply vddl not found, using dummy regulator
[   11.675921] ath10k_pci 0000:02:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[   11.721015] input: DELL08AF:00 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-DELL08AF:00/0018:06CB:76AF.0001/input/input18
[   11.721097] input: DELL08AF:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-DELL08AF:00/0018:06CB:76AF.0001/input/input19
[   11.721162] hid-generic 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL08AF:00 06CB:76AF] on i2c-DELL08AF:00
[   11.762480] ath: EEPROM regdomain: 0x6c
[   11.762481] ath: EEPROM indicates we should expect a direct regpair map
[   11.762482] ath: Country alpha2 being used: 00
[   11.762482] ath: Regpair used: 0x6c
[   11.765814] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[   11.851313] input: DELL08AF:00 06CB:76AF Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-DELL08AF:00/0018:06CB:76AF.0001/input/input21
[   11.851482] input: DELL08AF:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-DELL08AF:00/0018:06CB:76AF.0001/input/input22
[   11.851562] hid-multitouch 0018:06CB:76AF.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL08AF:00 06CB:76AF] on i2c-DELL08AF:00
[   12.025627] XFS (nvme0n1p2): Ending clean mount
[   12.026828] xfs filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[   12.094897] audit: type=1400 audit(1574162307.631:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=693 comm="apparmor_parser"
[   12.095101] audit: type=1400 audit(1574162307.631:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=688 comm="apparmor_parser"
[   12.095103] audit: type=1400 audit(1574162307.631:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=688 comm="apparmor_parser"
[   12.095299] audit: type=1400 audit(1574162307.631:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=692 comm="apparmor_parser"
[   12.095329] audit: type=1400 audit(1574162307.631:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=687 comm="apparmor_parser"
[   12.095651] audit: type=1400 audit(1574162307.631:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=686 comm="apparmor_parser"
[   12.095653] audit: type=1400 audit(1574162307.631:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=686 comm="apparmor_parser"
[   12.095655] audit: type=1400 audit(1574162307.631:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=686 comm="apparmor_parser"
[   12.096157] audit: type=1400 audit(1574162307.635:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=690 comm="apparmor_parser"
[   12.096936] audit: type=1400 audit(1574162307.635:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=695 comm="apparmor_parser"
[   12.397913] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.397914] Bluetooth: BNEP filters: protocol multicast
[   12.397917] Bluetooth: BNEP socket layer initialized
[   12.915033] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
[   12.929504] intel-lpss 0000:00:15.1: power state changed by ACPI to D3cold
[   13.274627] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
[   14.062613] fuse: init (API version 7.31)
[   14.195838] Bluetooth: RFCOMM TTY layer initialized
[   14.195847] Bluetooth: RFCOMM socket layer initialized
[   14.195856] Bluetooth: RFCOMM ver 1.11
[   15.773904] rfkill: input handler disabled
[   17.121197] intel-lpss 0000:00:15.1: power state changed by ACPI to D0
[   17.121225] intel-lpss 0000:00:15.1: restoring config space at offset 0x10 (was 0x4, writing 0x4f801004)
[   23.169991] wlp2s0: authenticate with 6c:f3:7f:10:93:48
[   23.224257] wlp2s0: send auth to 6c:f3:7f:10:93:48 (try 1/3)
[   23.226131] wlp2s0: authenticated
[   23.231698] wlp2s0: associate with 6c:f3:7f:10:93:48 (try 1/3)
[   23.235437] wlp2s0: RX AssocResp from 6c:f3:7f:10:93:48 (capab=0x411 status=0 aid=4)
[   23.237585] wlp2s0: associated
[   26.346373] rfkill: input handler enabled
[   26.993633] wlp2s0: deauthenticating from 6c:f3:7f:10:93:48 by local choice (Reason: 3=DEAUTH_LEAVING)
[   27.300490] intel-lpss 0000:00:15.1: power state changed by ACPI to D3cold
[   28.141700] rfkill: input handler disabled
[   33.021959] thunderbolt 0000:05:00.0: PME# enabled
[   33.039871] pcieport 0000:04:00.0: PME# enabled
[   33.059861] pcieport 0000:03:00.0: PME# enabled
[   33.079935] pcieport 0000:00:1d.0: PME# enabled
[   34.299878] pcieport 0000:00:1d.0: power state changed by ACPI to D3cold
[   34.377459] rfkill: input handler enabled
[   35.814931] rfkill: input handler disabled
[   36.525835] intel-lpss 0000:00:15.1: power state changed by ACPI to D0
[   36.525871] intel-lpss 0000:00:15.1: restoring config space at offset 0x10 (was 0x4, writing 0x4f801004)
[   45.616287] intel-lpss 0000:00:15.1: power state changed by ACPI to D3cold
[   45.709160] PM: suspend entry (s2idle)
[   45.713981] Filesystems sync: 0.004 seconds
[   45.715040] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   45.716874] OOM killer disabled.
[   45.716874] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   45.718028] printk: Suspending console(s) (use no_console_suspend to debug)
[   45.721133] intel-lpss 0000:00:15.1: power state changed by ACPI to D0
[   45.721176] intel-lpss 0000:00:15.1: restoring config space at offset 0x10 (was 0x4, writing 0x4f801004)
[   45.928844] psmouse serio1: Failed to disable mouse on isa0060/serio1
[   46.974500] pcieport 0000:04:04.0: pciehp: pcie_do_write_cmd: no response from device
[   46.974540] pcieport 0000:04:01.0: pciehp: pcie_do_write_cmd: no response from device
[   47.204548] pcieport 0000:00:1d.0: power state changed by ACPI to D0
[   47.332065] pcieport 0000:00:1d.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   47.332074] pcieport 0000:00:1d.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   47.332080] pcieport 0000:00:1d.0: restoring config space at offset 0x24 (was 0xa9f16001, writing 0xa9f16001)
[   47.332402] pcieport 0000:00:1d.0: PME# disabled
[   47.332502] pcieport 0000:03:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x1201ff)
[   47.332514] pcieport 0000:03:00.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   47.332521] pcieport 0000:03:00.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   47.332528] pcieport 0000:03:00.0: restoring config space at offset 0x24 (was 0x10001, writing 0xa9f16001)
[   47.332534] pcieport 0000:03:00.0: restoring config space at offset 0x20 (was 0x0, writing 0xda00ac00)
[   47.332541] pcieport 0000:03:00.0: restoring config space at offset 0x1c (was 0x101, writing 0x5141)
[   47.332547] pcieport 0000:03:00.0: restoring config space at offset 0x18 (was 0x0, writing 0x6d0403)
[   47.332558] pcieport 0000:03:00.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
[   47.332567] pcieport 0000:03:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100007)
[   47.332610] pcieport 0000:03:00.0: PME# disabled
[   47.332682] pcieport 0000:04:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x1201ff)
[   47.332695] pcieport 0000:04:02.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   47.332701] pcieport 0000:04:02.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   47.332708] pcieport 0000:04:02.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1)
[   47.332714] pcieport 0000:04:02.0: restoring config space at offset 0x20 (was 0x0, writing 0xc3f0c3f0)
[   47.332721] pcieport 0000:04:02.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1)
[   47.332727] pcieport 0000:04:02.0: restoring config space at offset 0x18 (was 0x0, writing 0x393904)
[   47.332738] pcieport 0000:04:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
[   47.332746] pcieport 0000:04:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100406)
[   47.332799] pcieport 0000:04:02.0: PME# disabled
[   47.332923] xhci_hcd 0000:39:00.0: restoring config space at offset 0x10 (was 0x0, writing 0xc3f00000)
[   47.332933] xhci_hcd 0000:39:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20)
[   47.332943] xhci_hcd 0000:39:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100403)
[   47.333001] xhci_hcd 0000:39:00.0: PME# disabled
[   47.333014] xhci_hcd 0000:39:00.0: enabling bus mastering
[   47.368615] nvme 0000:6e:00.0: PCI PM: Suspend power state: D0
[   47.368617] nvme 0000:6e:00.0: PCI PM: Skipped
[   47.369555] ACPI: EC: interrupt blocked
[   47.371383] i801_smbus 0000:00:1f.4: PCI PM: Suspend power state: D0
[   47.371384] i801_smbus 0000:00:1f.4: PCI PM: Skipped
[   47.373051] xhci_hcd 0000:39:00.0: PME# enabled
[   47.373510] pcieport 0000:00:1d.4: PCI PM: Suspend power state: D0
[   47.373511] pcieport 0000:00:1d.4: PCI PM: Skipped
[   47.373550] pcieport 0000:00:1c.0: PME# enabled
[   47.373659] xhci_hcd 0000:00:14.0: PME# enabled
[   47.379756] snd_hda_intel 0000:00:1f.3: power state changed by ACPI to D3hot
[   47.379765] snd_hda_intel 0000:00:1f.3: PCI PM: Suspend power state: D3hot
[   47.379771] i915 0000:00:02.0: PCI PM: Suspend power state: D3hot
[   47.391674] mei_me 0000:00:16.0: PCI PM: Suspend power state: D3hot
[   47.392031] ath10k_pci 0000:02:00.0: PCI PM: Suspend power state: D3hot
[   47.392065] xhci_hcd 0000:39:00.0: PCI PM: Suspend power state: D3hot
[   47.392067] pcieport 0000:00:1c.0: PCI PM: Suspend power state: D3hot
[   47.392102] intel_pch_thermal 0000:00:12.0: PCI PM: Suspend power state: D3hot
[   47.392109] proc_thermal 0000:00:04.0: PCI PM: Suspend power state: D3hot
[   47.392208] pcieport 0000:00:1c.6: PME# enabled
[   47.392341] intel-lpss 0000:00:15.1: power state changed by ACPI to D3cold
[   47.392383] intel-lpss 0000:00:15.1: PCI PM: Suspend power state: D3hot
[   47.392424] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
[   47.392434] xhci_hcd 0000:00:14.0: PCI PM: Suspend power state: D3hot
[   47.411679] pcieport 0000:00:1c.6: PCI PM: Suspend power state: D3hot
[   47.411682] pcieport 0000:04:02.0: PCI PM: Suspend power state: D3hot
[   47.411787] pcieport 0000:03:00.0: PME# enabled
[   47.431722] pcieport 0000:03:00.0: PCI PM: Suspend power state: D3hot
[   47.431837] pcieport 0000:00:1d.0: PME# enabled
[   48.635844] pcieport 0000:00:1d.0: power state changed by ACPI to D3cold
[   48.635850] pcieport 0000:00:1d.0: PCI PM: Suspend power state: D3cold
[   52.425453] ACPI: EC: interrupt unblocked
[   52.425500] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[   52.431736] intel-lpss 0000:00:15.0: power state changed by ACPI to D0
[   52.431781] intel-lpss 0000:00:15.0: restoring config space at offset 0x10 (was 0x4, writing 0x4f800004)
[   52.431848] intel-lpss 0000:00:15.1: power state changed by ACPI to D0
[   52.431893] intel-lpss 0000:00:15.1: restoring config space at offset 0x10 (was 0x4, writing 0x4f801004)
[   52.444354] pcieport 0000:00:1c.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   52.444363] pcieport 0000:00:1c.6: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   52.444367] pcieport 0000:00:1c.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   52.444375] pcieport 0000:00:1c.6: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   52.444377] pcieport 0000:00:1c.0: restoring config space at offset 0x24 (was 0x1fff1, writing 0x1fff1)
[   52.444383] pcieport 0000:00:1c.6: restoring config space at offset 0x24 (was 0x1fff1, writing 0x1fff1)
[   52.444415] i915 0000:00:02.0: restoring config space at offset 0x4 (was 0x100403, writing 0x100407)
[   52.444525] snd_hda_intel 0000:00:1f.3: power state changed by ACPI to D0
[   52.465743] rtsx_pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x100402, writing 0x100406)
[   53.960401] pcieport 0000:00:1d.0: power state changed by ACPI to D0
[   53.980259] pcieport 0000:00:1d.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   53.980265] pcieport 0000:00:1d.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   53.980271] pcieport 0000:00:1d.0: restoring config space at offset 0x24 (was 0xa9f16001, writing 0xa9f16001)
[   53.980407] pcieport 0000:03:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x1201ff)
[   53.980420] pcieport 0000:03:00.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   53.980426] pcieport 0000:03:00.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   53.980433] pcieport 0000:03:00.0: restoring config space at offset 0x24 (was 0x10001, writing 0xa9f16001)
[   53.980439] pcieport 0000:03:00.0: restoring config space at offset 0x20 (was 0x0, writing 0xda00ac00)
[   53.980445] pcieport 0000:03:00.0: restoring config space at offset 0x1c (was 0x101, writing 0x5141)
[   53.980451] pcieport 0000:03:00.0: restoring config space at offset 0x18 (was 0x0, writing 0x6d0403)
[   53.980461] pcieport 0000:03:00.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
[   53.980468] pcieport 0000:03:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100007)
[   53.980720] pcieport 0000:04:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x1201ff)
[   53.980727] pcieport 0000:04:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x1201ff)
[   53.980733] pcieport 0000:04:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x1201ff)
[   53.980736] pcieport 0000:04:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x1201ff)
[   53.980753] pcieport 0000:04:02.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   53.980764] pcieport 0000:04:00.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   53.980770] pcieport 0000:04:02.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   53.980773] pcieport 0000:04:01.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   53.980776] pcieport 0000:04:04.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   53.980780] pcieport 0000:04:00.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   53.980785] pcieport 0000:04:02.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1)
[   53.980788] pcieport 0000:04:01.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   53.980792] pcieport 0000:04:04.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   53.980796] pcieport 0000:04:00.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1)
[   53.980800] pcieport 0000:04:02.0: restoring config space at offset 0x20 (was 0x0, writing 0xc3f0c3f0)
[   53.980804] pcieport 0000:04:01.0: restoring config space at offset 0x24 (was 0x10001, writing 0x7ff16001)
[   53.980808] pcieport 0000:04:04.0: restoring config space at offset 0x24 (was 0x10001, writing 0xa9f18001)
[   53.980812] pcieport 0000:04:00.0: restoring config space at offset 0x20 (was 0x0, writing 0xda00da00)
[   53.980816] pcieport 0000:04:02.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1)
[   53.980819] pcieport 0000:04:01.0: restoring config space at offset 0x20 (was 0x0, writing 0xc3e0ac00)
[   53.980823] pcieport 0000:04:04.0: restoring config space at offset 0x20 (was 0x0, writing 0xd9f0c400)
[   53.980828] pcieport 0000:04:00.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1)
[   53.980832] pcieport 0000:04:02.0: restoring config space at offset 0x18 (was 0x0, writing 0x393904)
[   53.980835] pcieport 0000:04:01.0: restoring config space at offset 0x1c (was 0x101, writing 0x4141)
[   53.980839] pcieport 0000:04:04.0: restoring config space at offset 0x1c (was 0x101, writing 0x5151)
[   53.980844] pcieport 0000:04:00.0: restoring config space at offset 0x18 (was 0x0, writing 0x50504)
[   53.980851] pcieport 0000:04:01.0: restoring config space at offset 0x18 (was 0x0, writing 0x380604)
[   53.980857] pcieport 0000:04:04.0: restoring config space at offset 0x18 (was 0x0, writing 0x6d3a04)
[   53.980864] pcieport 0000:04:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
[   53.980871] pcieport 0000:04:00.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
[   53.980884] pcieport 0000:04:01.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
[   53.980887] pcieport 0000:04:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100406)
[   53.980890] pcieport 0000:04:04.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
[   53.980895] pcieport 0000:04:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100406)
[   53.980904] pcieport 0000:04:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
[   53.980916] pcieport 0000:04:04.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
[   53.981180] xhci_hcd 0000:39:00.0: restoring config space at offset 0x10 (was 0x0, writing 0xc3f00000)
[   53.981190] xhci_hcd 0000:39:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20)
[   53.981199] xhci_hcd 0000:39:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100403)
[   53.990292] pcieport 0000:00:1d.4: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   53.990303] pcieport 0000:00:1d.4: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   53.990311] pcieport 0000:00:1d.4: restoring config space at offset 0x24 (was 0x1fff1, writing 0x1fff1)
[   53.992993] xhci_hcd 0000:00:14.0: PME# disabled
[   53.993006] xhci_hcd 0000:00:14.0: enabling bus mastering
[   53.993027] pcieport 0000:00:1c.6: PME# disabled
[   53.993033] pcieport 0000:00:1c.0: PME# disabled
[   53.993635] pcieport 0000:00:1d.0: PME# disabled
[   53.993844] pcieport 0000:03:00.0: PME# disabled
[   53.993924] pcieport 0000:04:01.0: PME# disabled
[   53.993954] pcieport 0000:04:00.0: PME# disabled
[   53.993979] xhci_hcd 0000:39:00.0: PME# disabled
[   53.993983] pcieport 0000:04:04.0: PME# disabled
[   53.994345] xhci_hcd 0000:39:00.0: enabling bus mastering
[   54.198462] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536
[   54.308779] thunderbolt 0000:05:00.0: restoring config space at offset 0x14 (was 0x0, writing 0xda040000)
[   54.308784] thunderbolt 0000:05:00.0: restoring config space at offset 0x10 (was 0x0, writing 0xda000000)
[   54.308789] thunderbolt 0000:05:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20)
[   54.308794] thunderbolt 0000:05:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100406)
[   54.308837] thunderbolt 0000:05:00.0: PME# disabled
[   54.321510] OOM killer enabled.
[   54.321512] Restarting tasks ... 
[   54.322065] xhci_hcd 0000:39:00.0: PME# enabled
[   54.324439] pcieport 0000:04:04.0: PME# enabled
[   54.324565] pcieport 0000:04:01.0: PME# enabled
[   54.324970] done.
[   54.340329] pcieport 0000:04:02.0: PME# enabled
[   54.349620] intel-lpss 0000:00:15.0: power state changed by ACPI to D3cold
[   54.375017] PM: suspend exit
[   55.180885] intel-lpss 0000:00:15.1: power state changed by ACPI to D3cold
[   60.660421] intel-lpss 0000:00:15.1: power state changed by ACPI to D0
[   60.660481] intel-lpss 0000:00:15.1: restoring config space at offset 0x10 (was 0x4, writing 0x4f801004)
[   69.036842] intel-lpss 0000:00:15.1: power state changed by ACPI to D3cold
[   72.606550] thunderbolt 0000:05:00.0: PME# enabled
[   72.624560] pcieport 0000:04:00.0: PME# enabled
[   72.644559] pcieport 0000:03:00.0: PME# enabled
[   72.664723] pcieport 0000:00:1d.0: PME# enabled
[   73.885691] pcieport 0000:00:1d.0: power state changed by ACPI to D3cold
[   77.260893] pcieport 0000:00:1d.0: power state changed by ACPI to D0
[   77.388566] pcieport 0000:00:1d.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   77.388574] pcieport 0000:00:1d.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   77.388579] pcieport 0000:00:1d.0: restoring config space at offset 0x24 (was 0xa9f16001, writing 0xa9f16001)
[   77.388838] pcieport 0000:00:1d.0: PME# disabled
[   77.388944] pcieport 0000:03:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x1201ff)
[   77.388954] pcieport 0000:03:00.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   77.388960] pcieport 0000:03:00.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   77.388966] pcieport 0000:03:00.0: restoring config space at offset 0x24 (was 0x10001, writing 0xa9f16001)
[   77.388971] pcieport 0000:03:00.0: restoring config space at offset 0x20 (was 0x0, writing 0xda00ac00)
[   77.388977] pcieport 0000:03:00.0: restoring config space at offset 0x1c (was 0x101, writing 0x5141)
[   77.388983] pcieport 0000:03:00.0: restoring config space at offset 0x18 (was 0x0, writing 0x6d0403)
[   77.388992] pcieport 0000:03:00.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
[   77.388999] pcieport 0000:03:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100007)
[   77.389036] pcieport 0000:03:00.0: PME# disabled
[   77.389100] pcieport 0000:04:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x1201ff)
[   77.389110] pcieport 0000:04:01.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   77.389116] pcieport 0000:04:01.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   77.389121] pcieport 0000:04:01.0: restoring config space at offset 0x24 (was 0x10001, writing 0x7ff16001)
[   77.389127] pcieport 0000:04:01.0: restoring config space at offset 0x20 (was 0x0, writing 0xc3e0ac00)
[   77.389133] pcieport 0000:04:01.0: restoring config space at offset 0x1c (was 0x101, writing 0x4141)
[   77.389138] pcieport 0000:04:01.0: restoring config space at offset 0x18 (was 0x0, writing 0x380604)
[   77.389147] pcieport 0000:04:01.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
[   77.389154] pcieport 0000:04:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
[   77.389200] pcieport 0000:04:01.0: PME# disabled
[   77.389289] pcieport 0000:04:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x1201ff)
[   77.389299] pcieport 0000:04:00.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   77.389304] pcieport 0000:04:00.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   77.389310] pcieport 0000:04:00.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1)
[   77.389316] pcieport 0000:04:00.0: restoring config space at offset 0x20 (was 0x0, writing 0xda00da00)
[   77.389321] pcieport 0000:04:00.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1)
[   77.389327] pcieport 0000:04:00.0: restoring config space at offset 0x18 (was 0x0, writing 0x50504)
[   77.389336] pcieport 0000:04:00.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
[   77.389343] pcieport 0000:04:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100406)
[   77.389386] pcieport 0000:04:00.0: PME# disabled
[   77.389482] thunderbolt 0000:05:00.0: restoring config space at offset 0x14 (was 0x0, writing 0xda040000)
[   77.389490] thunderbolt 0000:05:00.0: restoring config space at offset 0x10 (was 0x0, writing 0xda000000)
[   77.389498] thunderbolt 0000:05:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20)
[   77.389506] thunderbolt 0000:05:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100406)
[   77.389561] thunderbolt 0000:05:00.0: PME# disabled
[   77.389667] pcieport 0000:04:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x1201ff)
[   77.389677] pcieport 0000:04:02.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   77.389683] pcieport 0000:04:02.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   77.389688] pcieport 0000:04:02.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1)
[   77.389694] pcieport 0000:04:02.0: restoring config space at offset 0x20 (was 0x0, writing 0xc3f0c3f0)
[   77.389700] pcieport 0000:04:02.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1)
[   77.389705] pcieport 0000:04:02.0: restoring config space at offset 0x18 (was 0x0, writing 0x393904)
[   77.389714] pcieport 0000:04:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
[   77.389721] pcieport 0000:04:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100406)
[   77.389765] pcieport 0000:04:02.0: PME# disabled
[   77.389882] xhci_hcd 0000:39:00.0: restoring config space at offset 0x10 (was 0x0, writing 0xc3f00000)
[   77.389891] xhci_hcd 0000:39:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20)
[   77.389899] xhci_hcd 0000:39:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100403)
[   77.389949] xhci_hcd 0000:39:00.0: PME# disabled
[   77.389960] xhci_hcd 0000:39:00.0: enabling bus mastering
[   77.390444] xhci_hcd 0000:39:00.0: PME# enabled
[   77.390523] pcieport 0000:04:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x1201ff)
[   77.390533] pcieport 0000:04:04.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   77.390539] pcieport 0000:04:04.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   77.390544] pcieport 0000:04:04.0: restoring config space at offset 0x24 (was 0x10001, writing 0xa9f18001)
[   77.390550] pcieport 0000:04:04.0: restoring config space at offset 0x20 (was 0x0, writing 0xd9f0c400)
[   77.390555] pcieport 0000:04:04.0: restoring config space at offset 0x1c (was 0x101, writing 0x5151)
[   77.390561] pcieport 0000:04:04.0: restoring config space at offset 0x18 (was 0x0, writing 0x6d3a04)
[   77.390570] pcieport 0000:04:04.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
[   77.390577] pcieport 0000:04:04.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
[   77.390622] pcieport 0000:04:04.0: PME# disabled
[   77.514602] pcieport 0000:04:01.0: PME# enabled
[   77.514734] pcieport 0000:04:02.0: PME# enabled
[   77.514830] pcieport 0000:04:04.0: PME# enabled
[   78.520270] pcieport 0000:04:04.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   78.520275] pcieport 0000:04:04.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   78.520279] pcieport 0000:04:04.0: restoring config space at offset 0x24 (was 0xa9f18001, writing 0xa9f18001)
[   78.520463] pcieport 0000:04:04.0: PME# disabled
[   78.520538] pcieport 0000:04:04.0: pciehp: Slot(4): Card present
[   78.520540] pcieport 0000:04:04.0: pciehp: Slot(4): Link Up
[   78.656325] pci 0000:3a:00.0: [8086:1578] type 01 class 0x060400
[   78.656512] pci 0000:3a:00.0: enabling Extended Tags
[   78.656794] pci 0000:3a:00.0: supports D1 D2
[   78.656796] pci 0000:3a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[   78.656808] pci 0000:3a:00.0: PME# disabled
[   78.656969] pci 0000:3a:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:04:04.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
[   78.672319] pci 0000:3a:00.0: scanning [bus 00-00] behind bridge, pass 0
[   78.672322] pci 0000:3a:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   78.672340] pci 0000:3a:00.0: scanning [bus 00-00] behind bridge, pass 1
[   78.672472] pci_bus 0000:3b: scanning bus
[   78.672509] pci 0000:3b:01.0: [8086:1578] type 01 class 0x060400
[   78.672638] pci 0000:3b:01.0: enabling Extended Tags
[   78.672980] pci 0000:3b:01.0: supports D1 D2
[   78.672981] pci 0000:3b:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[   78.672989] pci 0000:3b:01.0: PME# disabled
[   78.673186] pci 0000:3b:04.0: [8086:1578] type 01 class 0x060400
[   78.673309] pci 0000:3b:04.0: enabling Extended Tags
[   78.673493] pci 0000:3b:04.0: supports D1 D2
[   78.673494] pci 0000:3b:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[   78.673500] pci 0000:3b:04.0: PME# disabled
[   78.673712] pci_bus 0000:3b: fixups for bus
[   78.673713] pci 0000:3a:00.0: PCI bridge to [bus 3b-6d]
[   78.673727] pci 0000:3a:00.0:   bridge window [io  0x0000-0x0fff]
[   78.673733] pci 0000:3a:00.0:   bridge window [mem 0x00000000-0x000fffff]
[   78.673745] pci 0000:3a:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[   78.673750] pci 0000:3b:01.0: scanning [bus 00-00] behind bridge, pass 0
[   78.673752] pci 0000:3b:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   78.673767] pci 0000:3b:04.0: scanning [bus 00-00] behind bridge, pass 0
[   78.673768] pci 0000:3b:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   78.673783] pci 0000:3b:01.0: scanning [bus 00-00] behind bridge, pass 1
[   78.673884] pci_bus 0000:3c: scanning bus
[   78.673887] pci_bus 0000:3c: fixups for bus
[   78.673889] pci 0000:3b:01.0: PCI bridge to [bus 3c-6d]
[   78.673900] pci 0000:3b:01.0:   bridge window [io  0x0000-0x0fff]
[   78.673907] pci 0000:3b:01.0:   bridge window [mem 0x00000000-0x000fffff]
[   78.673918] pci 0000:3b:01.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[   78.673919] pci_bus 0000:3c: bus scan returning with max=3c
[   78.673921] pci_bus 0000:3c: busn_res: [bus 3c-6d] end is updated to 3c
[   78.673930] pci 0000:3b:04.0: scanning [bus 00-00] behind bridge, pass 1
[   78.674021] pci_bus 0000:3d: scanning bus
[   78.674024] pci_bus 0000:3d: fixups for bus
[   78.674025] pci 0000:3b:04.0: PCI bridge to [bus 3d-6d]
[   78.674036] pci 0000:3b:04.0:   bridge window [io  0x0000-0x0fff]
[   78.674042] pci 0000:3b:04.0:   bridge window [mem 0x00000000-0x000fffff]
[   78.674054] pci 0000:3b:04.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[   78.674055] pci_bus 0000:3d: [bus 3d-6d] extended by 0x30
[   78.674056] pci_bus 0000:3d: bus scan returning with max=6d
[   78.674057] pci_bus 0000:3d: busn_res: [bus 3d-6d] end is updated to 6d
[   78.674064] pci_bus 0000:3b: bus scan returning with max=6d
[   78.674065] pci_bus 0000:3b: busn_res: [bus 3b-6d] end is updated to 6d
[   78.674074] pci 0000:3b:04.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 3d-6d] add_size 100000 add_align 100000
[   78.674076] pci 0000:3b:04.0: bridge window [mem 0x00100000-0x001fffff] to [bus 3d-6d] add_size 100000 add_align 100000
[   78.674078] pci 0000:3a:00.0: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 3b-6d] add_size 100000 add_align 100000
[   78.674080] pci 0000:3a:00.0: bridge window [mem 0x00100000-0x002fffff] to [bus 3b-6d] add_size 100000 add_align 100000
[   78.674082] pci 0000:3a:00.0: bridge window [mem 0x00100000-0x002fffff] extended by 0x0000000015e00000
[   78.674084] pci 0000:3a:00.0: bridge window [mem 0x00100000-0x002fffff 64bit pref] extended by 0x0000000029e00000
[   78.674085] pci 0000:3b:04.0: bridge window [mem 0x00100000-0x001fffff] extended by 0x0000000015e00000
[   78.674086] pci 0000:3b:04.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] extended by 0x0000000029e00000
[   78.674092] pci 0000:3a:00.0: BAR 14: assigned [mem 0xc4000000-0xd9ffffff]
[   78.674094] pci 0000:3a:00.0: BAR 15: assigned [mem 0x80000000-0xa9ffffff 64bit pref]
[   78.674095] pci 0000:3a:00.0: BAR 13: no space for [io  size 0x2000]
[   78.674097] pci 0000:3a:00.0: BAR 13: failed to assign [io  size 0x2000]
[   78.674098] pci 0000:3a:00.0: BAR 13: no space for [io  size 0x2000]
[   78.674099] pci 0000:3a:00.0: BAR 13: failed to assign [io  size 0x2000]
[   78.674103] pci 0000:3b:01.0: BAR 14: assigned [mem 0xc4000000-0xc40fffff]
[   78.674105] pci 0000:3b:01.0: BAR 15: assigned [mem 0x80000000-0x800fffff 64bit pref]
[   78.674106] pci 0000:3b:04.0: BAR 14: assigned [mem 0xc4100000-0xd9ffffff]
[   78.674108] pci 0000:3b:04.0: BAR 15: assigned [mem 0x80100000-0xa9ffffff 64bit pref]
[   78.674109] pci 0000:3b:01.0: BAR 13: no space for [io  size 0x1000]
[   78.674110] pci 0000:3b:01.0: BAR 13: failed to assign [io  size 0x1000]
[   78.674111] pci 0000:3b:04.0: BAR 13: no space for [io  size 0x1000]
[   78.674112] pci 0000:3b:04.0: BAR 13: failed to assign [io  size 0x1000]
[   78.674114] pci 0000:3b:01.0: BAR 13: no space for [io  size 0x1000]
[   78.674115] pci 0000:3b:01.0: BAR 13: failed to assign [io  size 0x1000]
[   78.674116] pci 0000:3b:04.0: BAR 13: no space for [io  size 0x1000]
[   78.674117] pci 0000:3b:04.0: BAR 13: failed to assign [io  size 0x1000]
[   78.674119] pci 0000:3b:01.0: PCI bridge to [bus 3c]
[   78.674128] pci 0000:3b:01.0:   bridge window [mem 0xc4000000-0xc40fffff]
[   78.674134] pci 0000:3b:01.0:   bridge window [mem 0x80000000-0x800fffff 64bit pref]
[   78.674145] pci 0000:3b:04.0: PCI bridge to [bus 3d-6d]
[   78.674154] pci 0000:3b:04.0:   bridge window [mem 0xc4100000-0xd9ffffff]
[   78.674160] pci 0000:3b:04.0:   bridge window [mem 0x80100000-0xa9ffffff 64bit pref]
[   78.674171] pci 0000:3a:00.0: PCI bridge to [bus 3b-6d]
[   78.674180] pci 0000:3a:00.0:   bridge window [mem 0xc4000000-0xd9ffffff]
[   78.674186] pci 0000:3a:00.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[   78.674197] pcieport 0000:04:04.0: PCI bridge to [bus 3a-6d]
[   78.674199] pcieport 0000:04:04.0:   bridge window [io  0x5000-0x5fff]
[   78.674204] pcieport 0000:04:04.0:   bridge window [mem 0xc4000000-0xd9ffffff]
[   78.674208] pcieport 0000:04:04.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[   78.674215] PCI: No. 2 try to assign unassigned res
[   78.674217] pcieport 0000:04:04.0: resource 13 [io  0x5000-0x5fff] released
[   78.674218] pcieport 0000:04:04.0: PCI bridge to [bus 3a-6d]
[   78.674227] pcieport 0000:04:04.0: BAR 13: no space for [io  size 0x2000]
[   78.674228] pcieport 0000:04:04.0: BAR 13: failed to assign [io  size 0x2000]
[   78.674229] pci 0000:3a:00.0: BAR 13: no space for [io  size 0x2000]
[   78.674230] pci 0000:3a:00.0: BAR 13: failed to assign [io  size 0x2000]
[   78.674232] pci 0000:3b:01.0: BAR 13: no space for [io  size 0x1000]
[   78.674233] pci 0000:3b:01.0: BAR 13: failed to assign [io  size 0x1000]
[   78.674234] pci 0000:3b:04.0: BAR 13: no space for [io  size 0x1000]
[   78.674235] pci 0000:3b:04.0: BAR 13: failed to assign [io  size 0x1000]
[   78.674236] pci 0000:3b:01.0: PCI bridge to [bus 3c]
[   78.674248] pci 0000:3b:01.0:   bridge window [mem 0xc4000000-0xc40fffff]
[   78.674257] pci 0000:3b:01.0:   bridge window [mem 0x80000000-0x800fffff 64bit pref]
[   78.674273] pci 0000:3b:04.0: PCI bridge to [bus 3d-6d]
[   78.674285] pci 0000:3b:04.0:   bridge window [mem 0xc4100000-0xd9ffffff]
[   78.674294] pci 0000:3b:04.0:   bridge window [mem 0x80100000-0xa9ffffff 64bit pref]
[   78.674311] pci 0000:3a:00.0: PCI bridge to [bus 3b-6d]
[   78.674323] pci 0000:3a:00.0:   bridge window [mem 0xc4000000-0xd9ffffff]
[   78.674331] pci 0000:3a:00.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[   78.674347] pcieport 0000:04:04.0: PCI bridge to [bus 3a-6d]
[   78.674358] pcieport 0000:04:04.0:   bridge window [mem 0xc4000000-0xd9ffffff]
[   78.674364] pcieport 0000:04:04.0:   bridge window [mem 0x80000000-0xa9ffffff 64bit pref]
[   78.674408] pcieport 0000:3a:00.0: runtime IRQ mapping not provided by arch
[   78.674416] pcieport 0000:3a:00.0: enabling device (0000 -> 0002)
[   78.674868] pcieport 0000:3b:01.0: runtime IRQ mapping not provided by arch
[   78.674877] pcieport 0000:3a:00.0: enabling bus mastering
[   78.674883] pcieport 0000:3b:01.0: enabling device (0000 -> 0002)
[   78.675100] pcieport 0000:3b:01.0: enabling bus mastering
[   78.675465] pcieport 0000:3b:04.0: runtime IRQ mapping not provided by arch
[   78.675477] pcieport 0000:3b:04.0: enabling device (0000 -> 0002)
[   78.675859] pcieport 0000:3b:04.0: enabling bus mastering
[   78.675971] pcieport 0000:3b:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[   78.675980] pci_bus 0000:3d: dev 00, created physical slot 4-1
[   78.785788] pcieport 0000:3b:01.0: PME# enabled
[   78.785995] pcieport 0000:3b:04.0: PME# enabled
[   78.804460] pcieport 0000:3a:00.0: PME# enabled
[   78.824347] pcieport 0000:04:04.0: PME# enabled
[   79.588291] pcieport 0000:04:04.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   79.588298] pcieport 0000:04:04.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   79.588304] pcieport 0000:04:04.0: restoring config space at offset 0x24 (was 0xa9f18001, writing 0xa9f18001)
[   79.588605] pcieport 0000:04:04.0: PME# disabled
[   79.608368] pcieport 0000:3a:00.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   79.608379] pcieport 0000:3a:00.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   79.608388] pcieport 0000:3a:00.0: restoring config space at offset 0x24 (was 0xa9f18001, writing 0xa9f18001)
[   79.608953] pcieport 0000:3a:00.0: PME# disabled
[   79.628329] pcieport 0000:3b:04.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
[   79.628338] pcieport 0000:3b:04.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
[   79.628346] pcieport 0000:3b:04.0: restoring config space at offset 0x24 (was 0xa9f18011, writing 0xa9f18011)
[   79.628454] pcieport 0000:3b:04.0: PME# disabled
[   79.628525] pcieport 0000:3b:04.0: pciehp: Slot(4-1): Card present
[   79.628527] pcieport 0000:3b:04.0: pciehp: Slot(4-1): Link Up
[   79.764377] pci 0000:3d:00.0: [8086:1578] type 01 class 0x060400
[   79.764574] pci 0000:3d:00.0: enabling Extended Tags
[   79.764895] pci 0000:3d:00.0: supports D1 D2
[   79.764898] pci 0000:3d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[   79.764909] pci 0000:3d:00.0: PME# disabled
[   79.765069] pci 0000:3d:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:04:04.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
[   79.765378] pci 0000:3d:00.0: scanning [bus 00-00] behind bridge, pass 0
[   79.765381] pci 0000:3d:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   79.765404] pci 0000:3d:00.0: scanning [bus 00-00] behind bridge, pass 1
[   79.765570] pci_bus 0000:3e: scanning bus
[   79.765626] pci 0000:3e:01.0: [8086:1578] type 01 class 0x060400
[   79.765831] pci 0000:3e:01.0: enabling Extended Tags
[   79.766133] pci 0000:3e:01.0: supports D1 D2
[   79.766136] pci 0000:3e:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[   79.766146] pci 0000:3e:01.0: PME# disabled
[   79.766437] pci 0000:3e:04.0: [8086:1578] type 01 class 0x060400
[   79.766640] pci 0000:3e:04.0: enabling Extended Tags
[   79.766942] pci 0000:3e:04.0: supports D1 D2
[   79.766944] pci 0000:3e:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[   79.766955] pci 0000:3e:04.0: PME# disabled
[   79.767305] pci_bus 0000:3e: fixups for bus
[   79.767309] pci 0000:3d:00.0: PCI bridge to [bus 3e-6d]
[   79.767330] pci 0000:3d:00.0:   bridge window [io  0x0000-0x0fff]
[   79.767341] pci 0000:3d:00.0:   bridge window [mem 0x00000000-0x000fffff]
[   79.767361] pci 0000:3d:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[   79.767368] pci 0000:3e:01.0: scanning [bus 00-00] behind bridge, pass 0
[   79.767370] pci 0000:3e:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   79.767394] pci 0000:3e:04.0: scanning [bus 00-00] behind bridge, pass 0
[   79.767396] pci 0000:3e:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   79.767419] pci 0000:3e:01.0: scanning [bus 00-00] behind bridge, pass 1
[   79.767587] pci_bus 0000:3f: scanning bus
[   79.767649] pci 0000:3f:00.0: [1b21:1142] type 00 class 0x0c0330
[   79.767753] pci 0000:3f:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[   79.768162] pci 0000:3f:00.0: PME# supported from D3cold
[   79.768175] pci 0000:3f:00.0: PME# disabled
[   79.768624] pci_bus 0000:3f: fixups for bus
[   79.768629] pci 0000:3e:01.0: PCI bridge to [bus 3f-6d]
[   79.768653] pci 0000:3e:01.0:   bridge window [io  0x0000-0x0fff]
[   79.768665] pci 0000:3e:01.0:   bridge window [mem 0x00000000-0x000fffff]
[   79.768687] pci 0000:3e:01.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[   79.768691] pci_bus 0000:3f: bus scan returning with max=3f
[   79.768696] pci_bus 0000:3f: busn_res: [bus 3f-6d] end is updated to 3f
[   79.768716] pci 0000:3e:04.0: scanning [bus 00-00] behind bridge, pass 1
[   79.768921] pci_bus 0000:40: scanning bus
[   79.768930] pci_bus 0000:40: fixups for bus
[   79.768933] pci 0000:3e:04.0: PCI bridge to [bus 40-6d]
[   79.768958] pci 0000:3e:04.0:   bridge window [io  0x0000-0x0fff]
[   79.768971] pci 0000:3e:04.0:   bridge window [mem 0x00000000-0x000fffff]
[   79.768991] pci 0000:3e:04.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[   79.768995] pci_bus 0000:40: [bus 40-6d] extended by 0x2d
[   79.768998] pci_bus 0000:40: bus scan returning with max=6d
[   79.769003] pci_bus 0000:40: busn_res: [bus 40-6d] end is updated to 6d
[   79.769016] pci_bus 0000:3e: bus scan returning with max=6d
[   79.769021] pci_bus 0000:3e: busn_res: [bus 3e-6d] end is updated to 6d
[   79.769044] pci 0000:3e:04.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 40-6d] add_size 100000 add_align 100000
[   79.769050] pci 0000:3e:04.0: bridge window [mem 0x00100000-0x001fffff] to [bus 40-6d] add_size 100000 add_align 100000
[   79.769058] pci 0000:3d:00.0: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 3e-6d] add_size 100000 add_align 100000
[   79.769064] pci 0000:3d:00.0: bridge window [mem 0x00100000-0x002fffff] to [bus 3e-6d] add_size 100000 add_align 100000
[   79.769071] pci 0000:3d:00.0: bridge window [mem 0x00100000-0x002fffff] extended by 0x0000000015d00000
[   79.769075] pci 0000:3d:00.0: bridge window [mem 0x00100000-0x002fffff 64bit pref] extended by 0x0000000029d00000
[   79.769080] pci 0000:3e:04.0: bridge window [mem 0x00100000-0x001fffff] extended by 0x0000000015d00000
[   79.769084] pci 0000:3e:04.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] extended by 0x0000000029d00000
[   79.769092] pcieport 0000:3b:04.0: BAR 13: no space for [io  size 0x2000]
[   79.769097] pcieport 0000:3b:04.0: BAR 13: failed to assign [io  size 0x2000]
[   79.769101] pcieport 0000:3b:04.0: BAR 13: no space for [io  size 0x2000]
[   79.769105] pcieport 0000:3b:04.0: BAR 13: failed to assign [io  size 0x2000]
[   79.769115] pci 0000:3d:00.0: BAR 14: assigned [mem 0xc4100000-0xd9ffffff]
[   79.769122] pci 0000:3d:00.0: BAR 15: assigned [mem 0x80100000-0xa9ffffff 64bit pref]
[   79.769126] pci 0000:3d:00.0: BAR 13: no space for [io  size 0x2000]
[   79.769129] pci 0000:3d:00.0: BAR 13: failed to assign [io  size 0x2000]
[   79.769134] pci 0000:3d:00.0: BAR 13: no space for [io  size 0x2000]
[   79.769137] pci 0000:3d:00.0: BAR 13: failed to assign [io  size 0x2000]
[   79.769148] pci 0000:3e:01.0: BAR 14: assigned [mem 0xc4100000-0xc41fffff]
[   79.769154] pci 0000:3e:01.0: BAR 15: assigned [mem 0x80100000-0x801fffff 64bit pref]
[   79.769159] pci 0000:3e:04.0: BAR 14: assigned [mem 0xc4200000-0xd9ffffff]
[   79.769165] pci 0000:3e:04.0: BAR 15: assigned [mem 0x80200000-0xa9ffffff 64bit pref]
[   79.769169] pci 0000:3e:01.0: BAR 13: no space for [io  size 0x1000]
[   79.769173] pci 0000:3e:01.0: BAR 13: failed to assign [io  size 0x1000]
[   79.769177] pci 0000:3e:04.0: BAR 13: no space for [io  size 0x1000]
[   79.769180] pci 0000:3e:04.0: BAR 13: failed to assign [io  size 0x1000]
[   79.769186] pci 0000:3e:01.0: BAR 13: no space for [io  size 0x1000]
[   79.769189] pci 0000:3e:01.0: BAR 13: failed to assign [io  size 0x1000]
[   79.769192] pci 0000:3e:04.0: BAR 13: no space for [io  size 0x1000]
[   79.769195] pci 0000:3e:04.0: BAR 13: failed to assign [io  size 0x1000]
[   79.769203] pci 0000:3f:00.0: BAR 0: assigned [mem 0xc4100000-0xc4107fff 64bit]
[   79.769247] pci 0000:3e:01.0: PCI bridge to [bus 3f]
[   79.769265] pci 0000:3e:01.0:   bridge window [mem 0xc4100000-0xc41fffff]
[   79.769277] pci 0000:3e:01.0:   bridge window [mem 0x80100000-0x801fffff 64bit pref]
[   79.769305] pci 0000:3e:04.0: PCI bridge to [bus 40-6d]
[   79.769322] pci 0000:3e:04.0:   bridge window [mem 0xc4200000-0xd9ffffff]
[   79.769335] pci 0000:3e:04.0:   bridge window [mem 0x80200000-0xa9ffffff 64bit pref]
[   79.769356] pci 0000:3d:00.0: PCI bridge to [bus 3e-6d]
[   79.769385] pci 0000:3d:00.0:   bridge window [mem 0xc4100000-0xd9ffffff]
[   79.769402] pci 0000:3d:00.0:   bridge window [mem 0x80100000-0xa9ffffff 64bit pref]
[   79.769436] pcieport 0000:3b:04.0: PCI bridge to [bus 3d-6d]
[   79.769453] pcieport 0000:3b:04.0:   bridge window [mem 0xc4100000-0xd9ffffff]
[   79.769465] pcieport 0000:3b:04.0:   bridge window [mem 0x80100000-0xa9ffffff 64bit pref]
[   79.769485] PCI: No. 2 try to assign unassigned res
[   79.769499] pcieport 0000:3b:04.0: BAR 13: no space for [io  size 0x2000]
[   79.769503] pcieport 0000:3b:04.0: BAR 13: failed to assign [io  size 0x2000]
[   79.769507] pci 0000:3d:00.0: BAR 13: no space for [io  size 0x2000]
[   79.769511] pci 0000:3d:00.0: BAR 13: failed to assign [io  size 0x2000]
[   79.769517] pci 0000:3e:01.0: BAR 13: no space for [io  size 0x1000]
[   79.769521] pci 0000:3e:01.0: BAR 13: failed to assign [io  size 0x1000]
[   79.769525] pci 0000:3e:04.0: BAR 13: no space for [io  size 0x1000]
[   79.769529] pci 0000:3e:04.0: BAR 13: failed to assign [io  size 0x1000]
[   79.769533] pci 0000:3e:01.0: PCI bridge to [bus 3f]
[   79.769560] pci 0000:3e:01.0:   bridge window [mem 0xc4100000-0xc41fffff]
[   79.769577] pci 0000:3e:01.0:   bridge window [mem 0x80100000-0x801fffff 64bit pref]
[   79.769611] pci 0000:3e:04.0: PCI bridge to [bus 40-6d]
[   79.769628] pci 0000:3e:04.0:   bridge window [mem 0xc4200000-0xd9ffffff]
[   79.769641] pci 0000:3e:04.0:   bridge window [mem 0x80200000-0xa9ffffff 64bit pref]
[   79.769662] pci 0000:3d:00.0: PCI bridge to [bus 3e-6d]
[   79.769679] pci 0000:3d:00.0:   bridge window [mem 0xc4100000-0xd9ffffff]
[   79.769692] pci 0000:3d:00.0:   bridge window [mem 0x80100000-0xa9ffffff 64bit pref]
[   79.769717] pcieport 0000:3b:04.0: PCI bridge to [bus 3d-6d]
[   79.769731] pcieport 0000:3b:04.0:   bridge window [mem 0xc4100000-0xd9ffffff]
[   79.769741] pcieport 0000:3b:04.0:   bridge window [mem 0x80100000-0xa9ffffff 64bit pref]
[   79.769817] pcieport 0000:3d:00.0: runtime IRQ mapping not provided by arch
[   79.769836] pcieport 0000:3d:00.0: enabling device (0000 -> 0002)
[   79.770215] pcieport 0000:3e:01.0: runtime IRQ mapping not provided by arch
[   79.770224] pcieport 0000:3d:00.0: enabling bus mastering
[   79.770233] pcieport 0000:3e:01.0: enabling device (0000 -> 0002)
[   79.770472] pcieport 0000:3e:01.0: enabling bus mastering
[   79.770939] pcieport 0000:3e:04.0: runtime IRQ mapping not provided by arch
[   79.770949] pcieport 0000:3e:04.0: enabling device (0000 -> 0002)
[   79.771081] pcieport 0000:3e:04.0: enabling bus mastering
[   79.771252] pcieport 0000:3e:04.0: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[   79.771258] pci_bus 0000:40: dev 00, created physical slot 4-2
[   79.771602] pci 0000:3f:00.0: enabling device (0000 -> 0002)
[   79.771798] xhci_hcd 0000:3f:00.0: runtime IRQ mapping not provided by arch
[   79.771868] xhci_hcd 0000:3f:00.0: enabling bus mastering
[   79.771875] xhci_hcd 0000:3f:00.0: xHCI Host Controller
[   79.771880] xhci_hcd 0000:3f:00.0: new USB bus registered, assigned bus number 5
[   79.838834] xhci_hcd 0000:3f:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410
[   79.838868] xhci_hcd 0000:3f:00.0: enabling Mem-Wr-Inval
[   79.839444] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[   79.839444] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   79.839445] usb usb5: Product: xHCI Host Controller
[   79.839446] usb usb5: Manufacturer: Linux 5.4.0-rc8 xhci-hcd
[   79.839446] usb usb5: SerialNumber: 0000:3f:00.0
[   79.839634] hub 5-0:1.0: USB hub found
[   79.839652] hub 5-0:1.0: 2 ports detected
[   79.839849] xhci_hcd 0000:3f:00.0: xHCI Host Controller
[   79.839851] xhci_hcd 0000:3f:00.0: new USB bus registered, assigned bus number 6
[   79.839854] xhci_hcd 0000:3f:00.0: Host supports USB 3.0 SuperSpeed
[   79.840619] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[   79.840633] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[   79.840635] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   79.840635] usb usb6: Product: xHCI Host Controller
[   79.840636] usb usb6: Manufacturer: Linux 5.4.0-rc8 xhci-hcd
[   79.840637] usb usb6: SerialNumber: 0000:3f:00.0
[   79.840741] hub 6-0:1.0: USB hub found
[   79.840769] hub 6-0:1.0: 2 ports detected
[   79.896742] pcieport 0000:3e:04.0: PME# enabled
[   80.240260] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[   80.352205] thunderbolt 0000:05:00.0: 3: drom data crc32 mismatch (expected: 0xaf438340, got: 0xaf4383c0), continuing
[   80.355983] thunderbolt 0-3: new device found, vendor=0xd4 device=0xb051
[   80.355984] thunderbolt 0-3: Dell Dell Thunderbolt Cable
[   80.377954] failed hdr00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   80.477117] usb 5-1: New USB device found, idVendor=0424, idProduct=2807, bcdDevice= 2.04
[   80.477118] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   80.477119] usb 5-1: Product: USB2807 Hub
[   80.477119] usb 5-1: Manufacturer: Microchip
[   80.527211] hub 5-1:1.0: USB hub found
[   80.527330] hub 5-1:1.0: 7 ports detected
[   80.614252] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[   80.636857] usb 6-1: New USB device found, idVendor=0424, idProduct=5807, bcdDevice= 2.04
[   80.636858] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   80.636859] usb 6-1: Product: USB5807 Hub
[   80.636877] usb 6-1: Manufacturer: Microchip
[   80.687124] hub 6-1:1.0: USB hub found
[   80.687586] hub 6-1:1.0: 7 ports detected
[   80.780879] thunderbolt 0-303: ignoring unnecessary extra entries in DROM
[   80.784767] thunderbolt 0-303: new device found, vendor=0xd4 device=0xb054
[   80.784767] thunderbolt 0-303: Dell Dell Thunderbolt Dock
[   80.884288] usb 5-1.4: new low-speed USB device number 3 using xhci_hcd
[   81.035930] usb 5-1.4: New USB device found, idVendor=413c, idProduct=301a, bcdDevice= 1.00
[   81.035935] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   81.035938] usb 5-1.4: Product: Dell MS116 USB Optical Mouse
[   81.035941] usb 5-1.4: Manufacturer: PixArt
[   81.122351] usb 6-1.2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[   81.146478] usb 6-1.2: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.11
[   81.146483] usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[   81.146486] usb 6-1.2: Product: USB 10/100/1000 LAN
[   81.146489] usb 6-1.2: Manufacturer: Realtek
[   81.146491] usb 6-1.2: SerialNumber: 000001000000
[   81.676961] usb 5-1.5: new high-speed USB device number 4 using xhci_hcd
[   82.295597] usbcore: registered new interface driver r8152
[   82.301591] usbcore: registered new interface driver cdc_ether
[   82.465795] usb 5-1.5: New USB device found, idVendor=0bda, idProduct=4014, bcdDevice= 0.05
[   82.465796] usb 5-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[   82.465797] usb 5-1.5: Product: USB Audio
[   82.465798] usb 5-1.5: Manufacturer: Generic
[   82.465798] usb 5-1.5: SerialNumber: 200901010001
[   82.541798] usb 6-1.2: reset SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[   82.594738] usb 6-1.2: Dell TB16 Dock, disable RX aggregation
[   82.610120] r8152 6-1.2:1.0 (unnamed net_device) (uninitialized): Using pass-thru MAC addr 98:e7:43:a8:3c:db
[   82.640288] usb 5-1.6: new low-speed USB device number 5 using xhci_hcd
[   82.670933] r8152 6-1.2:1.0 eth0: v1.10.10
[   82.697638] r8152 6-1.2:1.0 enx98e743a83cdb: renamed from eth0
[   82.814597] usb 5-1.6: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.10
[   82.814598] usb 5-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[   82.814599] usb 5-1.6: Product: Dell KB216 Wired Keyboard
[   82.940423] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3a:00.0/0000:3b:04.0/0000:3d:00.0/0000:3e:01.0/0000:3f:00.0/usb5/5-1/5-1.4/5-1.4:1.0/0003:413C:301A.0002/input/input26
[   82.940794] hid-generic 0003:413C:301A.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:3f:00.0-1.4/input0
[   82.944800] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3a:00.0/0000:3b:04.0/0000:3d:00.0/0000:3e:01.0/0000:3f:00.0/usb5/5-1/5-1.6/5-1.6:1.0/0003:413C:2113.0003/input/input27
[   83.008575] hid-generic 0003:413C:2113.0003: input,hidraw2: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:3f:00.0-1.6/input0
[   83.017224] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3a:00.0/0000:3b:04.0/0000:3d:00.0/0000:3e:01.0/0000:3f:00.0/usb5/5-1/5-1.6/5-1.6:1.1/0003:413C:2113.0004/input/input28
[   83.076631] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3a:00.0/0000:3b:04.0/0000:3d:00.0/0000:3e:01.0/0000:3f:00.0/usb5/5-1/5-1.6/5-1.6:1.1/0003:413C:2113.0004/input/input29
[   83.077060] hid-generic 0003:413C:2113.0004: input,hidraw3: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:3f:00.0-1.6/input1
[   83.077165] usbcore: registered new interface driver usbhid
[   83.077167] usbhid: USB HID core driver
[   84.020516] usbcore: registered new interface driver snd-usb-audio
[   86.325800] IPv6: ADDRCONF(NETDEV_CHANGE): enx98e743a83cdb: link becomes ready
[   86.326964] r8152 6-1.2:1.0 enx98e743a83cdb: carrier on
[   98.786772] thunderbolt 0000:05:00.0: PME# enabled
[   98.804559] pcieport 0000:04:00.0: PME# enabled
[  113.468797] intel-lpss 0000:00:15.1: power state changed by ACPI to D0
[  113.468857] intel-lpss 0000:00:15.1: restoring config space at offset 0x10 (was 0x4, writing 0x4f801004)
[  114.512796] intel-lpss 0000:00:15.1: power state changed by ACPI to D3cold
[  130.587448] intel-lpss 0000:00:15.1: power state changed by ACPI to D0
[  130.587509] intel-lpss 0000:00:15.1: restoring config space at offset 0x10 (was 0x4, writing 0x4f801004)
[  136.332825] intel-lpss 0000:00:15.1: power state changed by ACPI to D3cold
[  138.328092] intel-lpss 0000:00:15.1: power state changed by ACPI to D0
[  138.328152] intel-lpss 0000:00:15.1: restoring config space at offset 0x10 (was 0x4, writing 0x4f801004)
[  163.069983] intel-lpss 0000:00:15.1: power state changed by ACPI to D3cold
[  165.321514] intel-lpss 0000:00:15.1: power state changed by ACPI to D0
[  165.321574] intel-lpss 0000:00:15.1: restoring config space at offset 0x10 (was 0x4, writing 0x4f801004)
[  174.077688] intel-lpss 0000:00:15.1: power state changed by ACPI to D3cold
[  183.101021] intel-lpss 0000:00:15.1: power state changed by ACPI to D0
[  183.101081] intel-lpss 0000:00:15.1: restoring config space at offset 0x10 (was 0x4, writing 0x4f801004)
[  184.749513] intel-lpss 0000:00:15.1: power state changed by ACPI to D3cold
[  192.151243] intel-lpss 0000:00:15.1: power state changed by ACPI to D0
[  192.151303] intel-lpss 0000:00:15.1: restoring config space at offset 0x10 (was 0x4, writing 0x4f801004)
[  193.421413] intel-lpss 0000:00:15.1: power state changed by ACPI to D3cold

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-19 16:55             ` Paul Menzel
  2019-11-19 17:20               ` Paul Menzel
@ 2019-11-20 10:50               ` Mika Westerberg
  2019-11-20 14:15                 ` Mario.Limonciello
  2019-11-22 10:50                 ` Mika Westerberg
  1 sibling, 2 replies; 34+ messages in thread
From: Mika Westerberg @ 2019-11-20 10:50 UTC (permalink / raw)
  To: Paul Menzel
  Cc: Mario Limonciello, Andreas Noever, Michael Jamet,
	Yehezkel Bernat, Christian Kellner, linux-kernel, Anthony Wong

On Tue, Nov 19, 2019 at 05:55:43PM +0100, Paul Menzel wrote:
> Dear Mika,
> 
> 
> On 2019-11-04 17:21, Mika Westerberg wrote:
> > On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
> 
> >> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
> >>
> >>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
> >>>> Sent: Monday, November 4, 2019 9:45 AM
> >>
> >>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
> >>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
> >>
> >>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
> >>
> >>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
> >>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
> >>>>>>> dock connected, the USB input devices, keyboard and mouse,
> >>>>>>> connected to the TB16 stop working. They work for a few seconds
> >>>>>>> (mouse cursor can be moved), but then stop working. The laptop
> >>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
> >>>>>>> according to `fwupdmgr`.
> >>>>>>
> >>>>>> What are the exact steps to reproduce? Just "echo mem >
> >>>>>> /sys/power/state" and then resume by pressing power button?
> >>
> >> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
> >> display. So more than `echo mem > /sys/power/state` is done. What
> >> distribution do you use?
> > 
> > I have buildroot based "distro" so there is no UI running.
> 
> Hmm, this is quite different from the “normal” use-case of the these devices.
> That way you won’t hit the bugs of the normal users. ;-)

Well, I can install some distro to that thing also :) I suppose Debian
10.2 does have this issue, no?

> >>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
> >>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
> >>>>>
> >>>>> I may have older/different firmware than you, though.
> >>>>
> >>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
> >>>> on my system :/
> >>
> >> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
> >> Updating to the recent version (I got the logs with) did not fix the issue.
> > 
> > I also tried v40 (that was originally on that system) but I was not able
> > to reproduce it.
> > 
> > Do you know if the user changed any BIOS settings?
> 
> We had to disable the Thunderbolt security settings as otherwise the USB
> devices wouldn’t work at cold boot either.

That does not sound right at all. There is the preboot ACL that allows
you to use TBT dock aready on boot. Bolt takes care of this.

Are you talking about USB devices connected to the TB16 dock?

Also are you connecting the TB16 dock to the Thunderbolt ports (left
side of the system marked with small lightning logo) or to the normal
Type-C ports (right side)?

> So, I built Linux 5.4-rc8 (`make bindeb-pkg -j8`), but unfortunately the
> error is still there. Sometimes, re-plugging the dock helped, and sometimes
> it did not.
> 
> Please find the logs attached. The strange thing is, the Linux kernel detects
> the devices and I do not see any disconnect events. But, `lsusb` does not list
> the keyboard and the mouse. Is that expected.

I'm bit confused. Can you describe the exact steps what you do (so I can
replicate them).

> Additionally, despite `CONFIG_PCI_DEBUG` I do not see more elaborate messages.

I see one strange thing in that log. The Thunderbolt driver does not
show the device at boot. You should see something like this when you
boot with the dock connected:

  thunderbolt 0-3: new device found, vendor=0xd4 device=0xb051
  thunderbolt 0-3: Dell Dell Thunderbolt Cable
  thunderbolt 0-303: new device found, vendor=0xd4 device=0xb054
  thunderbolt 0-303: Dell Dell Thunderbolt Dock

I only see those after you did suspend/resume cycle.

> Lastly, could the daemon boltd have anything to do with this?

It is the one that authorizes the PCIe tunneling so definitely has
something to do but below:

> 
> ```
> $ boltctl --version
> bolt 0.8
> $ boltctl list
>  ● Dell Thunderbolt Cable
>    ├─ type:          peripheral
>    ├─ name:          Dell Thunderbolt Cable
>    ├─ vendor:        Dell
>    ├─ uuid:          0082b09d-2f5f-d400-ffff-ffffffffffff
>    ├─ status:        authorized

looks what is expected.

^ permalink raw reply	[flat|nested] 34+ messages in thread

* RE: USB devices on Dell TB16 dock stop working after resuming
  2019-11-20 10:50               ` Mika Westerberg
@ 2019-11-20 14:15                 ` Mario.Limonciello
  2019-11-20 15:23                   ` Mika Westerberg
  2019-11-22 10:50                 ` Mika Westerberg
  1 sibling, 1 reply; 34+ messages in thread
From: Mario.Limonciello @ 2019-11-20 14:15 UTC (permalink / raw)
  To: mika.westerberg, pmenzel
  Cc: andreas.noever, michael.jamet, YehezkelShB, ck, linux-kernel,
	anthony.wong

> -----Original Message-----
> From: Mika Westerberg <mika.westerberg@linux.intel.com>
> Sent: Wednesday, November 20, 2019 4:51 AM
> To: Paul Menzel
> Cc: Limonciello, Mario; Andreas Noever; Michael Jamet; Yehezkel Bernat; Christian
> Kellner; linux-kernel@vger.kernel.org; Anthony Wong
> Subject: Re: USB devices on Dell TB16 dock stop working after resuming
> 
> 
> [EXTERNAL EMAIL]
> 
> On Tue, Nov 19, 2019 at 05:55:43PM +0100, Paul Menzel wrote:
> > Dear Mika,
> >
> >
> > On 2019-11-04 17:21, Mika Westerberg wrote:
> > > On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
> >
> > >> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
> > >>
> > >>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
> > >>>> Sent: Monday, November 4, 2019 9:45 AM
> > >>
> > >>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
> > >>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
> > >>
> > >>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
> > >>
> > >>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
> > >>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
> > >>>>>>> dock connected, the USB input devices, keyboard and mouse,
> > >>>>>>> connected to the TB16 stop working. They work for a few seconds
> > >>>>>>> (mouse cursor can be moved), but then stop working. The laptop
> > >>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
> > >>>>>>> according to `fwupdmgr`.
> > >>>>>>
> > >>>>>> What are the exact steps to reproduce? Just "echo mem >
> > >>>>>> /sys/power/state" and then resume by pressing power button?
> > >>
> > >> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
> > >> display. So more than `echo mem > /sys/power/state` is done. What
> > >> distribution do you use?
> > >
> > > I have buildroot based "distro" so there is no UI running.
> >
> > Hmm, this is quite different from the “normal” use-case of the these devices.
> > That way you won’t hit the bugs of the normal users. ;-)
> 
> Well, I can install some distro to that thing also :) I suppose Debian
> 10.2 does have this issue, no?
> 
> > >>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
> > >>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
> > >>>>>
> > >>>>> I may have older/different firmware than you, though.
> > >>>>
> > >>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
> > >>>> on my system :/
> > >>
> > >> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
> > >> Updating to the recent version (I got the logs with) did not fix the issue.
> > >
> > > I also tried v40 (that was originally on that system) but I was not able
> > > to reproduce it.
> > >
> > > Do you know if the user changed any BIOS settings?
> >
> > We had to disable the Thunderbolt security settings as otherwise the USB
> > devices wouldn’t work at cold boot either.
> 
> That does not sound right at all. There is the preboot ACL that allows
> you to use TBT dock aready on boot. Bolt takes care of this.

Yeah it might be useful to enumerate all the BIOS settings that are selected
related to Thunderbolt.  Some of them are a bit confusing.

> 
> Are you talking about USB devices connected to the TB16 dock?
> 
> Also are you connecting the TB16 dock to the Thunderbolt ports (left
> side of the system marked with small lightning logo) or to the normal
> Type-C ports (right side)?

It definitely wouldn't function at all on the right side.  The TB16 dock and
cable each contains Alpine Ridge, so it will only work with a TBT controller
on the other end.

> 
> > So, I built Linux 5.4-rc8 (`make bindeb-pkg -j8`), but unfortunately the
> > error is still there. Sometimes, re-plugging the dock helped, and sometimes
> > it did not.
> >
> > Please find the logs attached. The strange thing is, the Linux kernel detects
> > the devices and I do not see any disconnect events. But, `lsusb` does not list
> > the keyboard and the mouse. Is that expected.
> 
> I'm bit confused. Can you describe the exact steps what you do (so I can
> replicate them).
> 
> > Additionally, despite `CONFIG_PCI_DEBUG` I do not see more elaborate
> messages.
> 
> I see one strange thing in that log. The Thunderbolt driver does not
> show the device at boot. You should see something like this when you
> boot with the dock connected:
> 
>   thunderbolt 0-3: new device found, vendor=0xd4 device=0xb051
>   thunderbolt 0-3: Dell Dell Thunderbolt Cable
>   thunderbolt 0-303: new device found, vendor=0xd4 device=0xb054
>   thunderbolt 0-303: Dell Dell Thunderbolt Dock
> 
> I only see those after you did suspend/resume cycle.
> 
> > Lastly, could the daemon boltd have anything to do with this?
> 
> It is the one that authorizes the PCIe tunneling so definitely has
> something to do but below:
> 
> >
> > ```
> > $ boltctl --version
> > bolt 0.8
> > $ boltctl list
> >  ● Dell Thunderbolt Cable
> >    ├─ type:          peripheral
> >    ├─ name:          Dell Thunderbolt Cable
> >    ├─ vendor:        Dell
> >    ├─ uuid:          0082b09d-2f5f-d400-ffff-ffffffffffff
> >    ├─ status:        authorized
> 
> looks what is expected.

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-20 14:15                 ` Mario.Limonciello
@ 2019-11-20 15:23                   ` Mika Westerberg
  2019-11-20 17:06                     ` Mario.Limonciello
  0 siblings, 1 reply; 34+ messages in thread
From: Mika Westerberg @ 2019-11-20 15:23 UTC (permalink / raw)
  To: Mario.Limonciello
  Cc: pmenzel, andreas.noever, michael.jamet, YehezkelShB, ck,
	linux-kernel, anthony.wong

On Wed, Nov 20, 2019 at 02:15:17PM +0000, Mario.Limonciello@dell.com wrote:
> > -----Original Message-----
> > From: Mika Westerberg <mika.westerberg@linux.intel.com>
> > Sent: Wednesday, November 20, 2019 4:51 AM
> > To: Paul Menzel
> > Cc: Limonciello, Mario; Andreas Noever; Michael Jamet; Yehezkel Bernat; Christian
> > Kellner; linux-kernel@vger.kernel.org; Anthony Wong
> > Subject: Re: USB devices on Dell TB16 dock stop working after resuming
> > 
> > 
> > [EXTERNAL EMAIL]
> > 
> > On Tue, Nov 19, 2019 at 05:55:43PM +0100, Paul Menzel wrote:
> > > Dear Mika,
> > >
> > >
> > > On 2019-11-04 17:21, Mika Westerberg wrote:
> > > > On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
> > >
> > > >> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
> > > >>
> > > >>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
> > > >>>> Sent: Monday, November 4, 2019 9:45 AM
> > > >>
> > > >>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
> > > >>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
> > > >>
> > > >>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
> > > >>
> > > >>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
> > > >>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
> > > >>>>>>> dock connected, the USB input devices, keyboard and mouse,
> > > >>>>>>> connected to the TB16 stop working. They work for a few seconds
> > > >>>>>>> (mouse cursor can be moved), but then stop working. The laptop
> > > >>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
> > > >>>>>>> according to `fwupdmgr`.
> > > >>>>>>
> > > >>>>>> What are the exact steps to reproduce? Just "echo mem >
> > > >>>>>> /sys/power/state" and then resume by pressing power button?
> > > >>
> > > >> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
> > > >> display. So more than `echo mem > /sys/power/state` is done. What
> > > >> distribution do you use?
> > > >
> > > > I have buildroot based "distro" so there is no UI running.
> > >
> > > Hmm, this is quite different from the “normal” use-case of the these devices.
> > > That way you won’t hit the bugs of the normal users. ;-)
> > 
> > Well, I can install some distro to that thing also :) I suppose Debian
> > 10.2 does have this issue, no?
> > 
> > > >>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
> > > >>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
> > > >>>>>
> > > >>>>> I may have older/different firmware than you, though.
> > > >>>>
> > > >>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
> > > >>>> on my system :/
> > > >>
> > > >> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
> > > >> Updating to the recent version (I got the logs with) did not fix the issue.
> > > >
> > > > I also tried v40 (that was originally on that system) but I was not able
> > > > to reproduce it.
> > > >
> > > > Do you know if the user changed any BIOS settings?
> > >
> > > We had to disable the Thunderbolt security settings as otherwise the USB
> > > devices wouldn’t work at cold boot either.
> > 
> > That does not sound right at all. There is the preboot ACL that allows
> > you to use TBT dock aready on boot. Bolt takes care of this.
> 
> Yeah it might be useful to enumerate all the BIOS settings that are selected
> related to Thunderbolt.  Some of them are a bit confusing.

BTW, I played a bit with 9380 and it looks like there is no option to
enable Preboot ACL which means that if you have TBT security enabled
(user or secure) the Dock PCIe side is not functional during boot, only
once the OS has booted up. That's fine unless you want to enter BIOS
menu from the keyboard you have connected to the TB16 dock (probably not
too common use case anyway).

^ permalink raw reply	[flat|nested] 34+ messages in thread

* RE: USB devices on Dell TB16 dock stop working after resuming
  2019-11-20 15:23                   ` Mika Westerberg
@ 2019-11-20 17:06                     ` Mario.Limonciello
  2019-11-20 17:16                       ` Yehezkel Bernat
  2019-11-20 17:39                       ` Mika Westerberg
  0 siblings, 2 replies; 34+ messages in thread
From: Mario.Limonciello @ 2019-11-20 17:06 UTC (permalink / raw)
  To: mika.westerberg
  Cc: pmenzel, andreas.noever, michael.jamet, YehezkelShB, ck,
	linux-kernel, anthony.wong


> > Yeah it might be useful to enumerate all the BIOS settings that are selected
> > related to Thunderbolt.  Some of them are a bit confusing.
> 
> BTW, I played a bit with 9380 and it looks like there is no option to
> enable Preboot ACL which means that if you have TBT security enabled
> (user or secure) the Dock PCIe side is not functional during boot, only
> once the OS has booted up. That's fine unless you want to enter BIOS
> menu from the keyboard you have connected to the TB16 dock (probably not
> too common use case anyway).

Eh?  On 9380 in front of me:
System Configuration -> Thunderbolt (TM) Adapter Configuration

There is a checkbox for "Enable Thunderbolt (and PCIe behind TBT) Pre-boot
modules".  It's not checked by default, but that should turn on pre-boot ACL
stuff.  That's the thing that Paul probably needs checked too.

But I mean this is generally an unsafe (but convenient) option, it means that you
throw out security pre-boot, and all someone needs to do is turn off your machine,
plug in a malicious device, turn it on and then they have malicious device all the way
into OS.



^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-20 17:06                     ` Mario.Limonciello
@ 2019-11-20 17:16                       ` Yehezkel Bernat
  2019-11-20 17:41                         ` Mario.Limonciello
  2019-11-20 17:43                         ` Mika Westerberg
  2019-11-20 17:39                       ` Mika Westerberg
  1 sibling, 2 replies; 34+ messages in thread
From: Yehezkel Bernat @ 2019-11-20 17:16 UTC (permalink / raw)
  To: Mario Limonciello
  Cc: Mika Westerberg, pmenzel, Andreas Noever, Michael Jamet, ck,
	LKML, Anthony Wong

On Wed, Nov 20, 2019 at 7:06 PM <Mario.Limonciello@dell.com> wrote:
>
>
> But I mean this is generally an unsafe (but convenient) option, it means that you
> throw out security pre-boot, and all someone needs to do is turn off your machine,
> plug in a malicious device, turn it on and then they have malicious device all the way
> into OS.

Only if the attacker found how to forge the device UUID (and knew what UUIDs
are allowed), isn't it? Unless you take into account things like
external GPU box,
where it's pretty easy to replace the card installed inside it.

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-20 17:06                     ` Mario.Limonciello
  2019-11-20 17:16                       ` Yehezkel Bernat
@ 2019-11-20 17:39                       ` Mika Westerberg
  1 sibling, 0 replies; 34+ messages in thread
From: Mika Westerberg @ 2019-11-20 17:39 UTC (permalink / raw)
  To: Mario.Limonciello
  Cc: pmenzel, andreas.noever, michael.jamet, YehezkelShB, ck,
	linux-kernel, anthony.wong

On Wed, Nov 20, 2019 at 05:06:39PM +0000, Mario.Limonciello@dell.com wrote:
> 
> > > Yeah it might be useful to enumerate all the BIOS settings that are selected
> > > related to Thunderbolt.  Some of them are a bit confusing.
> > 
> > BTW, I played a bit with 9380 and it looks like there is no option to
> > enable Preboot ACL which means that if you have TBT security enabled
> > (user or secure) the Dock PCIe side is not functional during boot, only
> > once the OS has booted up. That's fine unless you want to enter BIOS
> > menu from the keyboard you have connected to the TB16 dock (probably not
> > too common use case anyway).
> 
> Eh?  On 9380 in front of me:
> System Configuration -> Thunderbolt (TM) Adapter Configuration
> 
> There is a checkbox for "Enable Thunderbolt (and PCIe behind TBT) Pre-boot
> modules".  It's not checked by default, but that should turn on pre-boot ACL
> stuff.  That's the thing that Paul probably needs checked too.

Ah, it's that one :) I found it as well but did not realize it is the
Preboot ACL support. The "modules" at the end got me confused.

Yes, Paul that you need to enable if you want the devices behind the
dock to work before OS gets control.

> But I mean this is generally an unsafe (but convenient) option, it means that you
> throw out security pre-boot, and all someone needs to do is turn off your machine,
> plug in a malicious device, turn it on and then they have malicious device all the way
> into OS.

Yup.

^ permalink raw reply	[flat|nested] 34+ messages in thread

* RE: USB devices on Dell TB16 dock stop working after resuming
  2019-11-20 17:16                       ` Yehezkel Bernat
@ 2019-11-20 17:41                         ` Mario.Limonciello
  2019-11-20 17:43                         ` Mika Westerberg
  1 sibling, 0 replies; 34+ messages in thread
From: Mario.Limonciello @ 2019-11-20 17:41 UTC (permalink / raw)
  To: yehezkelshb
  Cc: mika.westerberg, pmenzel, andreas.noever, michael.jamet, ck,
	linux-kernel, anthony.wong

> > But I mean this is generally an unsafe (but convenient) option, it means that you
> > throw out security pre-boot, and all someone needs to do is turn off your
> machine,
> > plug in a malicious device, turn it on and then they have malicious device all the
> way
> > into OS.
> 
> Only if the attacker found how to forge the device UUID (and knew what UUIDs
> are allowed), isn't it? Unless you take into account things like
> external GPU box,
> where it's pretty easy to replace the card installed inside it.

Notice, I never said it was easy :)

In order to turn that on something like that "generally" safely you need to have
mitigations like pre boot DMA protection in place.

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-20 17:16                       ` Yehezkel Bernat
  2019-11-20 17:41                         ` Mario.Limonciello
@ 2019-11-20 17:43                         ` Mika Westerberg
  1 sibling, 0 replies; 34+ messages in thread
From: Mika Westerberg @ 2019-11-20 17:43 UTC (permalink / raw)
  To: Yehezkel Bernat
  Cc: Mario Limonciello, pmenzel, Andreas Noever, Michael Jamet, ck,
	LKML, Anthony Wong

On Wed, Nov 20, 2019 at 07:16:58PM +0200, Yehezkel Bernat wrote:
> On Wed, Nov 20, 2019 at 7:06 PM <Mario.Limonciello@dell.com> wrote:
> >
> >
> > But I mean this is generally an unsafe (but convenient) option, it means that you
> > throw out security pre-boot, and all someone needs to do is turn off your machine,
> > plug in a malicious device, turn it on and then they have malicious device all the way
> > into OS.
> 
> Only if the attacker found how to forge the device UUID (and knew what UUIDs
> are allowed), isn't it? Unless you take into account things like
> external GPU box,
> where it's pretty easy to replace the card installed inside it.

No need to forge UUID if you can "borrow" the laptop for a while so that
you boot your own OS there that then updates the Boot ACL with your
malicious device UUIDs. Then you return the laptop and now it suddenly
allows booting from those as well.

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-20 10:50               ` Mika Westerberg
  2019-11-20 14:15                 ` Mario.Limonciello
@ 2019-11-22 10:50                 ` Mika Westerberg
  2019-11-22 11:05                   ` Paul Menzel
  1 sibling, 1 reply; 34+ messages in thread
From: Mika Westerberg @ 2019-11-22 10:50 UTC (permalink / raw)
  To: Paul Menzel
  Cc: Mario Limonciello, Andreas Noever, Michael Jamet,
	Yehezkel Bernat, Christian Kellner, linux-kernel, Anthony Wong,
	Mathias Nyman

On Wed, Nov 20, 2019 at 12:50:53PM +0200, Mika Westerberg wrote:
> On Tue, Nov 19, 2019 at 05:55:43PM +0100, Paul Menzel wrote:
> > Dear Mika,
> > 
> > 
> > On 2019-11-04 17:21, Mika Westerberg wrote:
> > > On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
> > 
> > >> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
> > >>
> > >>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
> > >>>> Sent: Monday, November 4, 2019 9:45 AM
> > >>
> > >>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
> > >>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
> > >>
> > >>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
> > >>
> > >>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
> > >>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
> > >>>>>>> dock connected, the USB input devices, keyboard and mouse,
> > >>>>>>> connected to the TB16 stop working. They work for a few seconds
> > >>>>>>> (mouse cursor can be moved), but then stop working. The laptop
> > >>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
> > >>>>>>> according to `fwupdmgr`.
> > >>>>>>
> > >>>>>> What are the exact steps to reproduce? Just "echo mem >
> > >>>>>> /sys/power/state" and then resume by pressing power button?
> > >>
> > >> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
> > >> display. So more than `echo mem > /sys/power/state` is done. What
> > >> distribution do you use?
> > > 
> > > I have buildroot based "distro" so there is no UI running.
> > 
> > Hmm, this is quite different from the “normal” use-case of the these devices.
> > That way you won’t hit the bugs of the normal users. ;-)
> 
> Well, I can install some distro to that thing also :) I suppose Debian
> 10.2 does have this issue, no?
> 
> > >>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
> > >>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
> > >>>>>
> > >>>>> I may have older/different firmware than you, though.
> > >>>>
> > >>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
> > >>>> on my system :/
> > >>
> > >> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
> > >> Updating to the recent version (I got the logs with) did not fix the issue.
> > > 
> > > I also tried v40 (that was originally on that system) but I was not able
> > > to reproduce it.
> > > 
> > > Do you know if the user changed any BIOS settings?
> > 
> > We had to disable the Thunderbolt security settings as otherwise the USB
> > devices wouldn’t work at cold boot either.
> 
> That does not sound right at all. There is the preboot ACL that allows
> you to use TBT dock aready on boot. Bolt takes care of this.
> 
> Are you talking about USB devices connected to the TB16 dock?
> 
> Also are you connecting the TB16 dock to the Thunderbolt ports (left
> side of the system marked with small lightning logo) or to the normal
> Type-C ports (right side)?
> 
> > So, I built Linux 5.4-rc8 (`make bindeb-pkg -j8`), but unfortunately the
> > error is still there. Sometimes, re-plugging the dock helped, and sometimes
> > it did not.
> > 
> > Please find the logs attached. The strange thing is, the Linux kernel detects
> > the devices and I do not see any disconnect events. But, `lsusb` does not list
> > the keyboard and the mouse. Is that expected.
> 
> I'm bit confused. Can you describe the exact steps what you do (so I can
> replicate them).

I managed to reproduce following scenario.

1. Boot the system up to UI
2. Connect TB16 dock (and see that it gets authorized by bolt)
3. Connect keyboard and mouse to the TB16 dock
4. Both mouse and keyboard are functional
5. Enter s2idle by closing laptop lid
6. Exit s2idle by opening the laptop lid
7. After ~10 seconds or so the mouse or keyboard or both do not work
   anymore. They do not respond but they are still "present".

The above does not happen always but from time to time.

Is this the scenario you see as well?

This is on Ubuntu 19.10 with the 5.3 stock kernel.

I can get them work again by unplugging them and plugging back (leaving
the TBT16 dock connected). Also if you run lspci when the problem
occurs it still shows the dock so PCIe link stays up.

I suspect this has something to do with the ASMEDIA xHCI controller but
I'm not an expert so Mathias CC'd.

> > Additionally, despite `CONFIG_PCI_DEBUG` I do not see more elaborate messages.
> 
> I see one strange thing in that log. The Thunderbolt driver does not
> show the device at boot. You should see something like this when you
> boot with the dock connected:
> 
>   thunderbolt 0-3: new device found, vendor=0xd4 device=0xb051
>   thunderbolt 0-3: Dell Dell Thunderbolt Cable
>   thunderbolt 0-303: new device found, vendor=0xd4 device=0xb054
>   thunderbolt 0-303: Dell Dell Thunderbolt Dock
> 
> I only see those after you did suspend/resume cycle.
> 
> > Lastly, could the daemon boltd have anything to do with this?
> 
> It is the one that authorizes the PCIe tunneling so definitely has
> something to do but below:
> 
> > 
> > ```
> > $ boltctl --version
> > bolt 0.8
> > $ boltctl list
> >  ● Dell Thunderbolt Cable
> >    ├─ type:          peripheral
> >    ├─ name:          Dell Thunderbolt Cable
> >    ├─ vendor:        Dell
> >    ├─ uuid:          0082b09d-2f5f-d400-ffff-ffffffffffff
> >    ├─ status:        authorized
> 
> looks what is expected.

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-22 10:50                 ` Mika Westerberg
@ 2019-11-22 11:05                   ` Paul Menzel
  2019-11-22 11:29                     ` Mika Westerberg
  0 siblings, 1 reply; 34+ messages in thread
From: Paul Menzel @ 2019-11-22 11:05 UTC (permalink / raw)
  To: Mika Westerberg
  Cc: Mario Limonciello, Andreas Noever, Michael Jamet,
	Yehezkel Bernat, Christian Kellner, linux-kernel, Anthony Wong,
	Mathias Nyman


[-- Attachment #1.1: Type: text/plain, Size: 37474 bytes --]

Dear Mika,


Thank you so much for looking into this issue.


On 2019-11-22 11:50, Mika Westerberg wrote:
> On Wed, Nov 20, 2019 at 12:50:53PM +0200, Mika Westerberg wrote:
>> On Tue, Nov 19, 2019 at 05:55:43PM +0100, Paul Menzel wrote:

>>> On 2019-11-04 17:21, Mika Westerberg wrote:
>>>> On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
>>>
>>>>> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
>>>>>
>>>>>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
>>>>>>> Sent: Monday, November 4, 2019 9:45 AM
>>>>>
>>>>>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
>>>>>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
>>>>>
>>>>>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
>>>>>
>>>>>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
>>>>>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
>>>>>>>>>> dock connected, the USB input devices, keyboard and mouse,
>>>>>>>>>> connected to the TB16 stop working. They work for a few seconds
>>>>>>>>>> (mouse cursor can be moved), but then stop working. The laptop
>>>>>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
>>>>>>>>>> according to `fwupdmgr`.
>>>>>>>>>
>>>>>>>>> What are the exact steps to reproduce? Just "echo mem >
>>>>>>>>> /sys/power/state" and then resume by pressing power button?
>>>>>
>>>>> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
>>>>> display. So more than `echo mem > /sys/power/state` is done. What
>>>>> distribution do you use?
>>>>
>>>> I have buildroot based "distro" so there is no UI running.
>>>
>>> Hmm, this is quite different from the “normal” use-case of the these devices.
>>> That way you won’t hit the bugs of the normal users. ;-)
>>
>> Well, I can install some distro to that thing also :) I suppose Debian
>> 10.2 does have this issue, no?
>>
>>>>>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
>>>>>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
>>>>>>>>
>>>>>>>> I may have older/different firmware than you, though.
>>>>>>>
>>>>>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
>>>>>>> on my system :/
>>>>>
>>>>> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
>>>>> Updating to the recent version (I got the logs with) did not fix the issue.
>>>>
>>>> I also tried v40 (that was originally on that system) but I was not able
>>>> to reproduce it.
>>>>
>>>> Do you know if the user changed any BIOS settings?
>>>
>>> We had to disable the Thunderbolt security settings as otherwise the USB
>>> devices wouldn’t work at cold boot either.
>>
>> That does not sound right at all. There is the preboot ACL that allows
>> you to use TBT dock aready on boot. Bolt takes care of this.
>>
>> Are you talking about USB devices connected to the TB16 dock?
>>
>> Also are you connecting the TB16 dock to the Thunderbolt ports (left
>> side of the system marked with small lightning logo) or to the normal
>> Type-C ports (right side)?
>>
>>> So, I built Linux 5.4-rc8 (`make bindeb-pkg -j8`), but unfortunately the
>>> error is still there. Sometimes, re-plugging the dock helped, and sometimes
>>> it did not.
>>>
>>> Please find the logs attached. The strange thing is, the Linux kernel detects
>>> the devices and I do not see any disconnect events. But, `lsusb` does not list
>>> the keyboard and the mouse. Is that expected.
>>
>> I'm bit confused. Can you describe the exact steps what you do (so I can
>> replicate them).
> 
> I managed to reproduce following scenario.
> 
> 1. Boot the system up to UI
> 2. Connect TB16 dock (and see that it gets authorized by bolt)
> 3. Connect keyboard and mouse to the TB16 dock
> 4. Both mouse and keyboard are functional
> 5. Enter s2idle by closing laptop lid
> 6. Exit s2idle by opening the laptop lid
> 7. After ~10 seconds or so the mouse or keyboard or both do not work
>    anymore. They do not respond but they are still "present".
> 
> The above does not happen always but from time to time.
> 
> Is this the scenario you see as well?

Yes, it is. Though I’d say it’s only five seconds or so.

> This is on Ubuntu 19.10 with the 5.3 stock kernel.

“stock” in upstream’s or Ubuntu’s?

> I can get them work again by unplugging them and plugging back (leaving
> the TBT16 dock connected). Also if you run lspci when the problem
> occurs it still shows the dock so PCIe link stays up.

Re-connecting the USB devices does not help here, but I still suspect it’s
the same issue.

Yesterday, I had my hand on a Dell XPS 13 7390 (10th Intel generation) and
tried it with the shipped Ubuntu 18.04 LTS. There, the problem was not
always reproducible, but it still happened. Sometimes, only one of the USB
device (either keyboard or mouse) stopped working.

```
[    0.000000] Linux version 4.15.0-1064-oem (buildd@lgw01-amd64-049) (gcc version 7.4.0 (Ubu
ntu 7.4.0-1ubuntu1~18.04.1)) #73-Ubuntu SMP Tue Nov 12 12:25:21 UTC 2019 (Ubuntu 4.15.0-1064.
73-oem 4.15.18)
[…]
[  158.517750] thunderbolt 0000:05:00.0: 303:b: disabled by eeprom
[  174.750235] thunderbolt 0000:05:00.0: stopping RX ring 0
[  174.750247] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[  174.750262] thunderbolt 0000:05:00.0: stopping TX ring 0
[  174.750271] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[  174.750281] thunderbolt 0000:05:00.0: control channel stopped
[  280.564072] thunderbolt 0000:05:00.0: control channel starting...
[  280.564074] thunderbolt 0000:05:00.0: starting TX ring 0
[  280.564080] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[  280.564081] thunderbolt 0000:05:00.0: starting RX ring 0
[  280.564087] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[  297.834059] thunderbolt 0000:05:00.0: stopping RX ring 0
[  297.834073] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[  297.834104] thunderbolt 0000:05:00.0: stopping TX ring 0
[  297.834115] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[  297.834128] thunderbolt 0000:05:00.0: control channel stopped
```

> I suspect this has something to do with the ASMEDIA xHCI controller but
> I'm not an expert so Mathias CC'd.
> 
>>> Additionally, despite `CONFIG_PCI_DEBUG` I do not see more elaborate messages.
>>
>> I see one strange thing in that log. The Thunderbolt driver does not
>> show the device at boot. You should see something like this when you
>> boot with the dock connected:
>>
>>   thunderbolt 0-3: new device found, vendor=0xd4 device=0xb051
>>   thunderbolt 0-3: Dell Dell Thunderbolt Cable
>>   thunderbolt 0-303: new device found, vendor=0xd4 device=0xb054
>>   thunderbolt 0-303: Dell Dell Thunderbolt Dock
>>
>> I only see those after you did suspend/resume cycle.
>>
>>> Lastly, could the daemon boltd have anything to do with this?
>>
>> It is the one that authorizes the PCIe tunneling so definitely has
>> something to do but below:
>>
>>>
>>> ```
>>> $ boltctl --version
>>> bolt 0.8
>>> $ boltctl list
>>>  ● Dell Thunderbolt Cable
>>>    ├─ type:          peripheral
>>>    ├─ name:          Dell Thunderbolt Cable
>>>    ├─ vendor:        Dell
>>>    ├─ uuid:          0082b09d-2f5f-d400-ffff-ffffffffffff
>>>    ├─ status:        authorized
>>
>> looks what is expected.


Kind regards,

Paul


PS: Here the Ubuntu 18.04 (Linux 4.15) thunderbolt logs. Full log attached.

> grep thunderb 20191121-update-5-only-USB-keyboard-works-dmesg.txt
[    1.164761] thunderbolt 0000:05:00.0: enabling device (0000 -> 0002)
[    1.165915] thunderbolt 0000:05:00.0: NHI initialized, starting thunderbolt
[    1.165918] thunderbolt 0000:05:00.0: allocating TX ring 0 of size 10
[    1.165951] thunderbolt 0000:05:00.0: allocating RX ring 0 of size 10
[    1.165985] thunderbolt 0000:05:00.0: control channel created
[    1.165987] thunderbolt 0000:05:00.0: control channel starting...
[    1.165988] thunderbolt 0000:05:00.0: starting TX ring 0
[    1.166006] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[    1.166007] thunderbolt 0000:05:00.0: starting RX ring 0
[    1.166013] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[    2.524679] thunderbolt 0000:05:00.0: current switch config:
[    2.524680] thunderbolt 0000:05:00.0:  Switch: 8086:15d3 (Revision: 6, TB Version: 2)
[    2.524681] thunderbolt 0000:05:00.0:   Max Port Number: 11
[    2.524681] thunderbolt 0000:05:00.0:   Config:
[    2.524696] thunderbolt 0000:05:00.0:    Upstream Port Number: 5 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 254ms
[    2.524697] thunderbolt 0000:05:00.0:    unknown1: 0x0 unknown4: 0x0
[    2.567959] thunderbolt 0000:05:00.0: 0: uid: 0xd410e424810b00
[    2.569367] thunderbolt 0000:05:00.0:  Port 0: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[    2.569367] thunderbolt 0000:05:00.0:   Max hop id (in/out): 7/7
[    2.569368] thunderbolt 0000:05:00.0:   Max counters: 8
[    2.569368] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    2.569878] thunderbolt 0000:05:00.0:  Port 1: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[    2.569879] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    2.569879] thunderbolt 0000:05:00.0:   Max counters: 16
[    2.569880] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[    2.570390] thunderbolt 0000:05:00.0:  Port 2: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[    2.570391] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    2.570391] thunderbolt 0000:05:00.0:   Max counters: 16
[    2.570391] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[    2.570902] thunderbolt 0000:05:00.0:  Port 3: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[    2.570903] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    2.570903] thunderbolt 0000:05:00.0:   Max counters: 16
[    2.570903] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800000
[    2.571414] thunderbolt 0000:05:00.0:  Port 4: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[    2.571415] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    2.571415] thunderbolt 0000:05:00.0:   Max counters: 16
[    2.571415] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[    2.571416] thunderbolt 0000:05:00.0: 0:5: disabled by eeprom
[    2.571542] thunderbolt 0000:05:00.0:  Port 6: 8086:15d3 (Revision: 6, TB Version: 1, Type: PCIe (0x100101))
[    2.571543] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[    2.571543] thunderbolt 0000:05:00.0:   Max counters: 2
[    2.571544] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    2.571670] thunderbolt 0000:05:00.0:  Port 7: 8086:15d3 (Revision: 6, TB Version: 1, Type: PCIe (0x100101))
[    2.571671] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[    2.571671] thunderbolt 0000:05:00.0:   Max counters: 2
[    2.571672] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    2.571798] thunderbolt 0000:05:00.0:  Port 8: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
[    2.571799] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[    2.571799] thunderbolt 0000:05:00.0:   Max counters: 2
[    2.571800] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    2.571926] thunderbolt 0000:05:00.0:  Port 9: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0101))
[    2.571927] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[    2.571927] thunderbolt 0000:05:00.0:   Max counters: 2
[    2.571927] thunderbolt 0000:05:00.0:   NFC Credits: 0x1000000
[    2.572055] thunderbolt 0000:05:00.0:  Port 10: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0101))
[    2.572055] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[    2.572055] thunderbolt 0000:05:00.0:   Max counters: 2
[    2.572056] thunderbolt 0000:05:00.0:   NFC Credits: 0x100000c
[    2.572183] thunderbolt 0000:05:00.0:  Port 11: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
[    2.572183] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[    2.572183] thunderbolt 0000:05:00.0:   Max counters: 2
[    2.572184] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    2.574876] thunderbolt 0000:05:00.0: current switch config:
[    2.574877] thunderbolt 0000:05:00.0:  Switch: 8086:1578 (Revision: 4, TB Version: 2)
[    2.574878] thunderbolt 0000:05:00.0:   Max Port Number: 11
[    2.574879] thunderbolt 0000:05:00.0:   Config:
[    2.574880] thunderbolt 0000:05:00.0:    Upstream Port Number: 1 Depth: 1 Route String: 0x3 Enabled: 1, PlugEventsDelay: 254ms
[    2.574881] thunderbolt 0000:05:00.0:    unknown1: 0x0 unknown4: 0x0
[    2.592952] thunderbolt 0000:05:00.0: 3: reading drom (length: 0x6e)
[    3.535730] thunderbolt 0000:05:00.0: 3: drom data crc32 mismatch (expected: 0xaf438340, got: 0xaf4383c0), continuing
[    3.536494] thunderbolt 0000:05:00.0: 3: uid: 0xd45f2f9db08200
[    3.536622] thunderbolt 0000:05:00.0:  Port 0: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    3.536623] thunderbolt 0000:05:00.0:   Max hop id (in/out): 7/7
[    3.536623] thunderbolt 0000:05:00.0:   Max counters: 8
[    3.536624] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    3.537133] thunderbolt 0000:05:00.0:  Port 1: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    3.537134] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    3.537134] thunderbolt 0000:05:00.0:   Max counters: 16
[    3.537135] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800048
[    3.537647] thunderbolt 0000:05:00.0:  Port 2: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    3.537647] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    3.537648] thunderbolt 0000:05:00.0:   Max counters: 16
[    3.537648] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[    3.538157] thunderbolt 0000:05:00.0:  Port 3: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    3.538158] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    3.538158] thunderbolt 0000:05:00.0:   Max counters: 16
[    3.538158] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800000
[    3.538669] thunderbolt 0000:05:00.0:  Port 4: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    3.538669] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    3.538670] thunderbolt 0000:05:00.0:   Max counters: 16
[    3.538670] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[    3.538671] thunderbolt 0000:05:00.0: 3:5: disabled by eeprom
[    3.538797] thunderbolt 0000:05:00.0:  Port 6: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100102))
[    3.538798] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[    3.538798] thunderbolt 0000:05:00.0:   Max counters: 2
[    3.538798] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    3.538925] thunderbolt 0000:05:00.0:  Port 7: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100101))
[    3.538926] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[    3.538926] thunderbolt 0000:05:00.0:   Max counters: 2
[    3.538926] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    3.538927] thunderbolt 0000:05:00.0: 3:8: disabled by eeprom
[    3.538927] thunderbolt 0000:05:00.0: 3:9: disabled by eeprom
[    3.538928] thunderbolt 0000:05:00.0: 3:a: disabled by eeprom
[    3.538928] thunderbolt 0000:05:00.0: 3:b: disabled by eeprom
[    3.540468] thunderbolt 0000:05:00.0: current switch config:
[    3.540469] thunderbolt 0000:05:00.0:  Switch: 8086:1578 (Revision: 4, TB Version: 2)
[    3.540469] thunderbolt 0000:05:00.0:   Max Port Number: 11
[    3.540470] thunderbolt 0000:05:00.0:   Config:
[    3.540471] thunderbolt 0000:05:00.0:    Upstream Port Number: 1 Depth: 2 Route String: 0x303 Enabled: 1, PlugEventsDelay: 254ms
[    3.540471] thunderbolt 0000:05:00.0:    unknown1: 0x0 unknown4: 0x0
[    3.558261] thunderbolt 0000:05:00.0: 303: reading drom (length: 0x75)
[    4.044036] thunderbolt 0-303: ignoring unnecessary extra entries in DROM
[    4.044040] thunderbolt 0000:05:00.0: 303: uid: 0x8086461d6849d310
[    4.044206] thunderbolt 0000:05:00.0:  Port 0: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    4.044207] thunderbolt 0000:05:00.0:   Max hop id (in/out): 7/7
[    4.044208] thunderbolt 0000:05:00.0:   Max counters: 8
[    4.044209] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    4.044676] thunderbolt 0000:05:00.0:  Port 1: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    4.044677] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    4.044677] thunderbolt 0000:05:00.0:   Max counters: 16
[    4.044678] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800000
[    4.045187] thunderbolt 0000:05:00.0:  Port 2: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    4.045188] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    4.045189] thunderbolt 0000:05:00.0:   Max counters: 16
[    4.045190] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[    4.045699] thunderbolt 0000:05:00.0:  Port 3: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    4.045701] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    4.045701] thunderbolt 0000:05:00.0:   Max counters: 16
[    4.045702] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[    4.046672] thunderbolt 0000:05:00.0:  Port 4: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    4.046673] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    4.046674] thunderbolt 0000:05:00.0:   Max counters: 16
[    4.046676] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[    4.046677] thunderbolt 0000:05:00.0: 303:5: disabled by eeprom
[    4.046798] thunderbolt 0000:05:00.0:  Port 6: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100102))
[    4.046799] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[    4.046800] thunderbolt 0000:05:00.0:   Max counters: 2
[    4.046801] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    4.046927] thunderbolt 0000:05:00.0:  Port 7: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100101))
[    4.046929] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[    4.046929] thunderbolt 0000:05:00.0:   Max counters: 2
[    4.046930] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    4.047054] thunderbolt 0000:05:00.0:  Port 8: 8086:1578 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0102))
[    4.047055] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[    4.047056] thunderbolt 0000:05:00.0:   Max counters: 2
[    4.047056] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    4.047057] thunderbolt 0000:05:00.0: 303:9: disabled by eeprom
[    4.047184] thunderbolt 0000:05:00.0:  Port 10: 8086:1578 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0101))
[    4.047185] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[    4.047186] thunderbolt 0000:05:00.0:   Max counters: 2
[    4.047186] thunderbolt 0000:05:00.0:   NFC Credits: 0x1000000
[    4.047187] thunderbolt 0000:05:00.0: 303:b: disabled by eeprom
[   19.933636] thunderbolt 0000:05:00.0: stopping RX ring 0
[   19.933651] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[   19.933673] thunderbolt 0000:05:00.0: stopping TX ring 0
[   19.933683] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[   19.933695] thunderbolt 0000:05:00.0: control channel stopped
[   27.352135] thunderbolt 0000:05:00.0: control channel starting...
[   27.352138] thunderbolt 0000:05:00.0: starting TX ring 0
[   27.352145] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[   27.352146] thunderbolt 0000:05:00.0: starting RX ring 0
[   27.352153] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[   31.464322] thunderbolt 0000:05:00.0: current switch config:
[   31.464325] thunderbolt 0000:05:00.0:  Switch: 8086:1578 (Revision: 4, TB Version: 2)
[   31.464327] thunderbolt 0000:05:00.0:   Max Port Number: 11
[   31.464329] thunderbolt 0000:05:00.0:   Config:
[   31.464331] thunderbolt 0000:05:00.0:    Upstream Port Number: 1 Depth: 1 Route String: 0x3 Enabled: 1, PlugEventsDelay: 254ms
[   31.464333] thunderbolt 0000:05:00.0:    unknown1: 0x0 unknown4: 0x0
[   32.224561] thunderbolt 0000:05:00.0: 3: reading drom (length: 0x6e)
[   32.601413] thunderbolt 0000:05:00.0: 3: drom data crc32 mismatch (expected: 0xaf438340, got: 0xaf4383c0), continuing
[   32.602180] thunderbolt 0000:05:00.0: 3: uid: 0xd45f2f9db08200
[   32.602309] thunderbolt 0000:05:00.0:  Port 0: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   32.602309] thunderbolt 0000:05:00.0:   Max hop id (in/out): 7/7
[   32.602310] thunderbolt 0000:05:00.0:   Max counters: 8
[   32.602310] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[   32.602820] thunderbolt 0000:05:00.0:  Port 1: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   32.602821] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   32.602821] thunderbolt 0000:05:00.0:   Max counters: 16
[   32.602822] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800048
[   32.603332] thunderbolt 0000:05:00.0:  Port 2: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   32.603332] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   32.603333] thunderbolt 0000:05:00.0:   Max counters: 16
[   32.603333] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[   32.603844] thunderbolt 0000:05:00.0:  Port 3: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   32.603844] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   32.603845] thunderbolt 0000:05:00.0:   Max counters: 16
[   32.603845] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800000
[   32.604358] thunderbolt 0000:05:00.0:  Port 4: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   32.604359] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   32.604360] thunderbolt 0000:05:00.0:   Max counters: 16
[   32.604361] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[   32.604362] thunderbolt 0000:05:00.0: 3:5: disabled by eeprom
[   32.604488] thunderbolt 0000:05:00.0:  Port 6: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100102))
[   32.604489] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[   32.604490] thunderbolt 0000:05:00.0:   Max counters: 2
[   32.604491] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[   32.604613] thunderbolt 0000:05:00.0:  Port 7: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100101))
[   32.604614] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[   32.604615] thunderbolt 0000:05:00.0:   Max counters: 2
[   32.604616] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[   32.604617] thunderbolt 0000:05:00.0: 3:8: disabled by eeprom
[   32.604618] thunderbolt 0000:05:00.0: 3:9: disabled by eeprom
[   32.604619] thunderbolt 0000:05:00.0: 3:a: disabled by eeprom
[   32.604619] thunderbolt 0000:05:00.0: 3:b: disabled by eeprom
[   32.607873] thunderbolt 0000:05:00.0: current switch config:
[   32.607875] thunderbolt 0000:05:00.0:  Switch: 8086:1578 (Revision: 4, TB Version: 2)
[   32.607876] thunderbolt 0000:05:00.0:   Max Port Number: 11
[   32.607877] thunderbolt 0000:05:00.0:   Config:
[   32.607879] thunderbolt 0000:05:00.0:    Upstream Port Number: 1 Depth: 2 Route String: 0x303 Enabled: 1, PlugEventsDelay: 254ms
[   32.607880] thunderbolt 0000:05:00.0:    unknown1: 0x0 unknown4: 0x0
[   32.628563] thunderbolt 0000:05:00.0: 303: reading drom (length: 0x75)
[   33.018678] thunderbolt 0000:05:00.0: 303: uid: 0x8086461d6849d310
[   33.018804] thunderbolt 0000:05:00.0:  Port 0: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   33.018805] thunderbolt 0000:05:00.0:   Max hop id (in/out): 7/7
[   33.018805] thunderbolt 0000:05:00.0:   Max counters: 8
[   33.018806] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[   33.019315] thunderbolt 0000:05:00.0:  Port 1: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   33.019316] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   33.019316] thunderbolt 0000:05:00.0:   Max counters: 16
[   33.019317] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800000
[   33.019827] thunderbolt 0000:05:00.0:  Port 2: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   33.019827] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   33.019828] thunderbolt 0000:05:00.0:   Max counters: 16
[   33.019828] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[   33.020341] thunderbolt 0000:05:00.0:  Port 3: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   33.020343] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   33.020343] thunderbolt 0000:05:00.0:   Max counters: 16
[   33.020344] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[   33.020853] thunderbolt 0000:05:00.0:  Port 4: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   33.020854] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   33.020855] thunderbolt 0000:05:00.0:   Max counters: 16
[   33.020856] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[   33.020857] thunderbolt 0000:05:00.0: 303:5: disabled by eeprom
[   33.020981] thunderbolt 0000:05:00.0:  Port 6: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100102))
[   33.020982] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[   33.020983] thunderbolt 0000:05:00.0:   Max counters: 2
[   33.020984] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[   33.021109] thunderbolt 0000:05:00.0:  Port 7: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100101))
[   33.021110] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[   33.021111] thunderbolt 0000:05:00.0:   Max counters: 2
[   33.021111] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[   33.021236] thunderbolt 0000:05:00.0:  Port 8: 8086:1578 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0102))
[   33.021237] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[   33.021238] thunderbolt 0000:05:00.0:   Max counters: 2
[   33.021239] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[   33.021240] thunderbolt 0000:05:00.0: 303:9: disabled by eeprom
[   33.021364] thunderbolt 0000:05:00.0:  Port 10: 8086:1578 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0101))
[   33.021365] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[   33.021366] thunderbolt 0000:05:00.0:   Max counters: 2
[   33.021367] thunderbolt 0000:05:00.0:   NFC Credits: 0x1000000
[   33.021368] thunderbolt 0000:05:00.0: 303:b: disabled by eeprom
[   59.918377] thunderbolt 0000:05:00.0: stopping RX ring 0
[   59.918391] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[   59.918414] thunderbolt 0000:05:00.0: stopping TX ring 0
[   59.918424] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[   59.918436] thunderbolt 0000:05:00.0: control channel stopped
[   70.252266] thunderbolt 0000:05:00.0: control channel starting...
[   70.252272] thunderbolt 0000:05:00.0: starting TX ring 0
[   70.252283] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[   70.252286] thunderbolt 0000:05:00.0: starting RX ring 0
[   70.252296] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[   87.006216] thunderbolt 0000:05:00.0: stopping RX ring 0
[   87.006230] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[   87.006268] thunderbolt 0000:05:00.0: stopping TX ring 0
[   87.006275] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[   87.006284] thunderbolt 0000:05:00.0: control channel stopped
[   98.948481] thunderbolt 0000:05:00.0: control channel starting...
[   98.948495] thunderbolt 0000:05:00.0: starting TX ring 0
[   98.948517] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[   98.948527] thunderbolt 0000:05:00.0: starting RX ring 0
[   98.948546] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[  114.910424] thunderbolt 0000:05:00.0: stopping RX ring 0
[  114.910436] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[  114.910455] thunderbolt 0000:05:00.0: stopping TX ring 0
[  114.910464] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[  114.910474] thunderbolt 0000:05:00.0: control channel stopped
[  155.720248] thunderbolt 0000:05:00.0: control channel starting...
[  155.720252] thunderbolt 0000:05:00.0: starting TX ring 0
[  155.720261] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[  155.720263] thunderbolt 0000:05:00.0: starting RX ring 0
[  155.720271] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[  156.967814] thunderbolt 0000:05:00.0: current switch config:
[  156.967817] thunderbolt 0000:05:00.0:  Switch: 8086:1578 (Revision: 4, TB Version: 2)
[  156.967818] thunderbolt 0000:05:00.0:   Max Port Number: 11
[  156.967818] thunderbolt 0000:05:00.0:   Config:
[  156.967820] thunderbolt 0000:05:00.0:    Upstream Port Number: 1 Depth: 1 Route String: 0x3 Enabled: 1, PlugEventsDelay: 254ms
[  156.967821] thunderbolt 0000:05:00.0:    unknown1: 0x0 unknown4: 0x0
[  157.727645] thunderbolt 0000:05:00.0: 3: reading drom (length: 0x6e)
[  158.104628] thunderbolt 0000:05:00.0: 3: drom data crc32 mismatch (expected: 0xaf438340, got: 0xaf4383c0), continuing
[  158.105394] thunderbolt 0000:05:00.0: 3: uid: 0xd45f2f9db08200
[  158.105522] thunderbolt 0000:05:00.0:  Port 0: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.105523] thunderbolt 0000:05:00.0:   Max hop id (in/out): 7/7
[  158.105523] thunderbolt 0000:05:00.0:   Max counters: 8
[  158.105524] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[  158.106033] thunderbolt 0000:05:00.0:  Port 1: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.106034] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.106034] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.106035] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800048
[  158.106545] thunderbolt 0000:05:00.0:  Port 2: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.106546] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.106546] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.106547] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[  158.107057] thunderbolt 0000:05:00.0:  Port 3: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.107057] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.107058] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.107058] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800000
[  158.107594] thunderbolt 0000:05:00.0:  Port 4: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.107594] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.107595] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.107595] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[  158.107596] thunderbolt 0000:05:00.0: 3:5: disabled by eeprom
[  158.107698] thunderbolt 0000:05:00.0:  Port 6: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100102))
[  158.107698] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[  158.107699] thunderbolt 0000:05:00.0:   Max counters: 2
[  158.107699] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[  158.107825] thunderbolt 0000:05:00.0:  Port 7: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100101))
[  158.107826] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[  158.107826] thunderbolt 0000:05:00.0:   Max counters: 2
[  158.107827] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[  158.107827] thunderbolt 0000:05:00.0: 3:8: disabled by eeprom
[  158.107828] thunderbolt 0000:05:00.0: 3:9: disabled by eeprom
[  158.107828] thunderbolt 0000:05:00.0: 3:a: disabled by eeprom
[  158.107829] thunderbolt 0000:05:00.0: 3:b: disabled by eeprom
[  158.110679] thunderbolt 0000:05:00.0: current switch config:
[  158.110682] thunderbolt 0000:05:00.0:  Switch: 8086:1578 (Revision: 4, TB Version: 2)
[  158.110683] thunderbolt 0000:05:00.0:   Max Port Number: 11
[  158.110683] thunderbolt 0000:05:00.0:   Config:
[  158.110684] thunderbolt 0000:05:00.0:    Upstream Port Number: 1 Depth: 2 Route String: 0x303 Enabled: 1, PlugEventsDelay: 254ms
[  158.110685] thunderbolt 0000:05:00.0:    unknown1: 0x0 unknown4: 0x0
[  158.128469] thunderbolt 0000:05:00.0: 303: reading drom (length: 0x75)
[  158.515063] thunderbolt 0000:05:00.0: 303: uid: 0x8086461d6849d310
[  158.515189] thunderbolt 0000:05:00.0:  Port 0: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.515190] thunderbolt 0000:05:00.0:   Max hop id (in/out): 7/7
[  158.515191] thunderbolt 0000:05:00.0:   Max counters: 8
[  158.515191] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[  158.515701] thunderbolt 0000:05:00.0:  Port 1: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.515701] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.515702] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.515702] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800000
[  158.516213] thunderbolt 0000:05:00.0:  Port 2: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.516213] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.516214] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.516214] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[  158.516724] thunderbolt 0000:05:00.0:  Port 3: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.516725] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.516725] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.516726] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[  158.517236] thunderbolt 0000:05:00.0:  Port 4: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.517237] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.517237] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.517238] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[  158.517238] thunderbolt 0000:05:00.0: 303:5: disabled by eeprom
[  158.517364] thunderbolt 0000:05:00.0:  Port 6: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100102))
[  158.517365] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[  158.517365] thunderbolt 0000:05:00.0:   Max counters: 2
[  158.517366] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[  158.517492] thunderbolt 0000:05:00.0:  Port 7: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100101))
[  158.517493] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[  158.517493] thunderbolt 0000:05:00.0:   Max counters: 2
[  158.517494] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[  158.517620] thunderbolt 0000:05:00.0:  Port 8: 8086:1578 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0102))
[  158.517621] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[  158.517621] thunderbolt 0000:05:00.0:   Max counters: 2
[  158.517622] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[  158.517622] thunderbolt 0000:05:00.0: 303:9: disabled by eeprom
[  158.517748] thunderbolt 0000:05:00.0:  Port 10: 8086:1578 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0101))
[  158.517749] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[  158.517749] thunderbolt 0000:05:00.0:   Max counters: 2
[  158.517750] thunderbolt 0000:05:00.0:   NFC Credits: 0x1000000
[  158.517750] thunderbolt 0000:05:00.0: 303:b: disabled by eeprom
[  174.750235] thunderbolt 0000:05:00.0: stopping RX ring 0
[  174.750247] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[  174.750262] thunderbolt 0000:05:00.0: stopping TX ring 0
[  174.750271] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[  174.750281] thunderbolt 0000:05:00.0: control channel stopped
[  280.564072] thunderbolt 0000:05:00.0: control channel starting...
[  280.564074] thunderbolt 0000:05:00.0: starting TX ring 0
[  280.564080] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[  280.564081] thunderbolt 0000:05:00.0: starting RX ring 0
[  280.564087] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[  297.834059] thunderbolt 0000:05:00.0: stopping RX ring 0
[  297.834073] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[  297.834104] thunderbolt 0000:05:00.0: stopping TX ring 0
[  297.834115] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[  297.834128] thunderbolt 0000:05:00.0: control channel stopped

[-- Attachment #1.2: 20191121-update-5-only-USB-keyboard-works-dmesg.txt --]
[-- Type: text/plain, Size: 180113 bytes --]

[    0.000000] microcode: microcode updated early to revision 0xca, date = 2019-10-03
[    0.000000] Linux version 4.15.0-1064-oem (buildd@lgw01-amd64-049) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #73-Ubuntu SMP Tue Nov 12 12:25:21 UTC 2019 (Ubuntu 4.15.0-1064.73-oem 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-1064-oem root=UUID=4286adf3-0e31-471c-b901-a9a3fd3f2485 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040400000-0x0000000047570fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000047571000-0x0000000047571fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000047572000-0x0000000047572fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000047573000-0x000000005e5fbfff] usable
[    0.000000] BIOS-e820: [mem 0x000000005e5fc000-0x000000005e5fcfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e5fd000-0x000000005e5fefff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e5ff000-0x000000005e602fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e603000-0x000000005e603fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e604000-0x000000005e607fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e608000-0x000000005e608fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e609000-0x000000005e60dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e60e000-0x000000005e60efff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e60f000-0x000000005e613fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e614000-0x000000005e615fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e616000-0x000000005e619fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e61a000-0x000000005e61bfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e61c000-0x000000005e61ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e620000-0x000000005e621fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e622000-0x000000005e626fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e627000-0x000000005e628fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e629000-0x000000005e62dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e62e000-0x000000005e630fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e631000-0x000000005e635fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e636000-0x000000005e636fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e637000-0x000000005e63afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e63b000-0x000000005e64cfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e64d000-0x000000005e66afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e66b000-0x000000005e66bfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e66c000-0x000000005e66ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e670000-0x000000005e670fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e671000-0x000000005e675fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e676000-0x000000005e677fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e678000-0x000000005e67cfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e67d000-0x000000005e67dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e67e000-0x000000005e682fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e683000-0x000000005e683fff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e684000-0x000000005e688fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005e689000-0x000000005e68afff] type 20
[    0.000000] BIOS-e820: [mem 0x000000005e68b000-0x000000005f989fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000005f98a000-0x000000005ff89fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000005ff8a000-0x000000005fffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000005ffff000-0x000000005fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000060000000-0x000000006f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000048e7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.70 by Dell
[    0.000000] efi:  SMBIOS=0x5e7c0000  ACPI=0x5fffe000  ACPI 2.0=0x5fffe014  ESRT=0x5e6e1018  MEMATTR=0x5bfd8018  PROP=0x475402e0 
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.2 present.
[    0.000000] DMI: Dell Inc. XPS 13 7390/0G2D0W, BIOS 1.2.0 10/03/2019
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x48e800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 0070000000 mask 7FF0000000 uncachable
[    0.000000]   2 base 006C000000 mask 7FFC000000 uncachable
[    0.000000]   3 base 006B000000 mask 7FFF000000 uncachable
[    0.000000]   4 base 4000000000 mask 4000000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x60000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x000000005e6e1018 to 0x000000005e6e1050.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x477542000, 0x477542fff] PGTABLE
[    0.000000] BRK [0x477543000, 0x477543fff] PGTABLE
[    0.000000] BRK [0x477544000, 0x477544fff] PGTABLE
[    0.000000] BRK [0x477545000, 0x477545fff] PGTABLE
[    0.000000] BRK [0x477546000, 0x477546fff] PGTABLE
[    0.000000] BRK [0x477547000, 0x477547fff] PGTABLE
[    0.000000] BRK [0x477548000, 0x477548fff] PGTABLE
[    0.000000] BRK [0x477549000, 0x477549fff] PGTABLE
[    0.000000] BRK [0x47754a000, 0x47754afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x30a91000-0x3453ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000005FFFE014 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x000000005FFFD0E8 0000C4 (v01 DELL   Dell Inc 20170001 ??LL 20160422)
[    0.000000] ACPI: FACP 0x000000005FFF5000 000114 (v06 DELL   Dell Inc 20170001 ??LL 20160422)
[    0.000000] ACPI: DSDT 0x000000005FFAD000 044054 (v02 DELL   Dell Inc 20170001 ??LL 20160422)
[    0.000000] ACPI: FACS 0x000000005FF2D000 000040
[    0.000000] ACPI: SSDT 0x000000005FFFB000 001B4A (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.000000] ACPI: SSDT 0x000000005FFF6000 004DA6 (v02 DptfTa DptfTabl 00001000 INTL 20160527)
[    0.000000] ACPI: HPET 0x000000005FFF4000 000038 (v01 DELL   Dell Inc 20170001 ??LL 20160422)
[    0.000000] ACPI: APIC 0x000000005FFF3000 000164 (v03 DELL   Dell Inc 20170001 ??LL 20160422)
[    0.000000] ACPI: MCFG 0x000000005FFF2000 00003C (v01 DELL   Dell Inc 20170001 ??LL 20160422)
[    0.000000] ACPI: SSDT 0x000000005FFAB000 001431 (v02 DELL   DellRtd3 00001000 INTL 20160527)
[    0.000000] ACPI: SSDT 0x000000005FFAA000 000A9E (v02 DELL   xh_Dell_ 00000000 INTL 20160527)
[    0.000000] ACPI: NHLT 0x000000005FFA9000 00002D (v00 DELL   Dell Inc 20170001 ??LL 20160422)
[    0.000000] ACPI: SSDT 0x000000005FFA8000 000932 (v02 DELL   UsbCTabl 00001000 INTL 20160527)
[    0.000000] ACPI: LPIT 0x000000005FFA7000 000094 (v01 DELL   Dell Inc 20170001 ??LL 20160422)
[    0.000000] ACPI: SSDT 0x000000005FFA6000 000B75 (v02 DELL   PtidDevc 00001000 INTL 20160527)
[    0.000000] ACPI: DBGP 0x000000005FFA5000 000034 (v01 DELL   Dell Inc 20170001 ??LL 20160422)
[    0.000000] ACPI: DBG2 0x000000005FFA4000 000054 (v00 DELL   Dell Inc 20170001 ??LL 20160422)
[    0.000000] ACPI: BOOT 0x000000005FFA3000 000028 (v01 DELL   CBX3     20170001 ??LL 20160422)
[    0.000000] ACPI: SSDT 0x000000005FFA1000 001336 (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.000000] ACPI: DMAR 0x000000005FFA0000 0000A8 (v01 INTEL  Dell Inc 00000002      01000013)
[    0.000000] ACPI: SSDT 0x000000005FF9F000 000156 (v02 Intel  ADebTabl 00001000 INTL 20160527)
[    0.000000] ACPI: BGRT 0x000000005FF9E000 000038 (v01 DELL   Dell Inc 20170001 ??LL 20160422)
[    0.000000] ACPI: FPDT 0x000000005FF9D000 000034 (v01 DELL   Dell Inc 20170001 ??LL 20160422)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000048e7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x48e7d5000-0x48e7fffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000048e7fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040400000-0x0000000047570fff]
[    0.000000]   node   0: [mem 0x0000000047573000-0x000000005e5fbfff]
[    0.000000]   node   0: [mem 0x000000005ffff000-0x000000005fffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000048e7fffff]
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000048e7fffff]
[    0.000000] On node 0 totalpages: 4114840
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 23 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 5960 pages used for memmap
[    0.000000]   DMA32 zone: 381435 pages, LIFO batch:31
[    0.000000]   Normal zone: 58272 pages used for memmap
[    0.000000]   Normal zone: 3729408 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000006b800000-0x000000006f7fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x403fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x47571000-0x47571fff]
[    0.000000] PM: Registered nosave memory: [mem 0x47572000-0x47572fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e5fc000-0x5e5fcfff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e5fd000-0x5e5fefff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e5ff000-0x5e602fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e603000-0x5e603fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e604000-0x5e607fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e608000-0x5e608fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e609000-0x5e60dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e60e000-0x5e60efff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e60f000-0x5e613fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e614000-0x5e615fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e616000-0x5e619fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e61a000-0x5e61bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e61c000-0x5e61ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e620000-0x5e621fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e622000-0x5e626fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e627000-0x5e628fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e629000-0x5e62dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e62e000-0x5e630fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e631000-0x5e635fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e636000-0x5e636fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e637000-0x5e63afff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e63b000-0x5e64cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e64d000-0x5e66afff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e66b000-0x5e66bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e66c000-0x5e66ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e670000-0x5e670fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e671000-0x5e675fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e676000-0x5e677fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e678000-0x5e67cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e67d000-0x5e67dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e67e000-0x5e682fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e683000-0x5e683fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e684000-0x5e688fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e689000-0x5e68afff]
[    0.000000] PM: Registered nosave memory: [mem 0x5e68b000-0x5f989fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5f98a000-0x5ff89fff]
[    0.000000] PM: Registered nosave memory: [mem 0x5ff8a000-0x5fffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x60000000-0x6f7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x6f800000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x6f800000-0xfeffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 4050521
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-1064-oem root=UUID=4286adf3-0e31-471c-b901-a9a3fd3f2485 ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16010412K/16459360K available (12300K kernel code, 2486K rwdata, 4276K rodata, 2432K init, 2388K bss, 448948K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] ftrace: allocating 39630 entries in 155 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.004000] APIC: Switch to symmetric I/O mode setup
[    0.004000] DMAR: Host address width 39
[    0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.004000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.004000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.004000] DMAR: RMRR base: 0x0000005f4e5000 end: 0x0000005f504fff
[    0.004000] DMAR: RMRR base: 0x0000006b000000 end: 0x0000006f7fffff
[    0.004000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.004000] x2apic enabled
[    0.004000] Switched APIC routing to cluster x2apic.
[    0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.024000] tsc: Detected 2300.000 MHz processor
[    0.024000] tsc: Detected 2304.000 MHz TSC
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4608.00 BogoMIPS (lpj=9216000)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.028730] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.028794] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.028831] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.028997] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.028998] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.029009] CPU0: Thermal monitoring enabled (TM1)
[    0.029033] process: using mwait in idle threads
[    0.029035] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.029035] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.029037] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.029038] Spectre V2 : Mitigation: Enhanced IBRS
[    0.029038] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.029041] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.029042] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.034813] Freeing SMP alternatives memory: 36K
[    0.037910] TSC deadline timer enabled
[    0.037920] smpboot: CPU0: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xc)
[    0.037959] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.037979] ... version:                4
[    0.037980] ... bit width:              48
[    0.037980] ... generic registers:      4
[    0.037981] ... value mask:             0000ffffffffffff
[    0.037981] ... max period:             00007fffffffffff
[    0.037981] ... fixed-purpose events:   3
[    0.037981] ... event mask:             000000070000000f
[    0.038007] Hierarchical SRCU implementation.
[    0.038795] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.038823] smp: Bringing up secondary CPUs ...
[    0.038862] x86: Booting SMP configuration:
[    0.038862] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.040856] smp: Brought up 1 node, 8 CPUs
[    0.040856] smpboot: Max logical packages: 1
[    0.040856] smpboot: Total of 8 processors activated (36864.00 BogoMIPS)
[    0.044451] devtmpfs: initialized
[    0.044451] x86/mm: Memory block size: 128MB
[    0.044740] evm: security.selinux
[    0.044740] evm: security.SMACK64
[    0.044741] evm: security.SMACK64EXEC
[    0.044741] evm: security.SMACK64TRANSMUTE
[    0.044741] evm: security.SMACK64MMAP
[    0.044741] evm: security.apparmor
[    0.044742] evm: security.ima
[    0.044742] evm: security.capability
[    0.044750] PM: Registering ACPI NVS region [mem 0x47571000-0x47571fff] (4096 bytes)
[    0.044750] PM: Registering ACPI NVS region [mem 0x5f98a000-0x5ff89fff] (6291456 bytes)
[    0.044750] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.044750] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.044750] pinctrl core: initialized pinctrl subsystem
[    0.044750] RTC time: 15:52:22, date: 11/21/19
[    0.044966] NET: Registered protocol family 16
[    0.045036] audit: initializing netlink subsys (disabled)
[    0.045039] audit: type=2000 audit(1574351542.044:1): state=initialized audit_enabled=0 res=1
[    0.045039] cpuidle: using governor ladder
[    0.045039] cpuidle: using governor menu
[    0.045039] Simple Boot Flag at 0x47 set to 0x80
[    0.045039] ACPI: bus type PCI registered
[    0.045039] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.045039] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.045039] PCI: not using MMCONFIG
[    0.045039] PCI: Using configuration type 1 for base access
[    0.045039] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.045039] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.045039] ACPI: Added _OSI(Module Device)
[    0.045039] ACPI: Added _OSI(Processor Device)
[    0.045039] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.045039] ACPI: Added _OSI(Processor Aggregator Device)
[    0.045039] ACPI: Added _OSI(Linux-Dell-Video)
[    0.045039] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.045039] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.080978] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.083448] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.160087] ACPI: Dynamic OEM Table Load:
[    0.160105] ACPI: SSDT 0xFFFF9C9D7BA83700 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.160680] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.162598] ACPI: Dynamic OEM Table Load:
[    0.162605] ACPI: SSDT 0xFFFF9C9D7BAB3000 000400 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.163209] ACPI: Dynamic OEM Table Load:
[    0.163215] ACPI: SSDT 0xFFFF9C9D7B529000 0005A2 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.163931] ACPI: Dynamic OEM Table Load:
[    0.163936] ACPI: SSDT 0xFFFF9C9D7BAA6000 00011B (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    0.164468] ACPI: Dynamic OEM Table Load:
[    0.164485] ACPI: SSDT 0xFFFF9C9D7DD44000 000BE2 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    0.165372] ACPI: Dynamic OEM Table Load:
[    0.165379] ACPI: SSDT 0xFFFF9C9D7B52A800 000778 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.166147] ACPI: Dynamic OEM Table Load:
[    0.166153] ACPI: SSDT 0xFFFF9C9D7BAB6800 0003D7 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.166881] ACPI: Dynamic OEM Table Load:
[    0.166887] ACPI: SSDT 0xFFFF9C9D7DD40000 000D74 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.168347] ACPI: Dynamic OEM Table Load:
[    0.168353] ACPI: SSDT 0xFFFF9C9D7BAB3C00 0003CA (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.172465] ACPI: EC: EC started
[    0.172465] ACPI: EC: interrupt blocked
[    0.179232] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[    0.179233] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.179234] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[    0.179235] ACPI: Interpreter enabled
[    0.179275] ACPI: (supports S0 S3 S4 S5)
[    0.179276] ACPI: Using IOAPIC for interrupt routing
[    0.179308] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.180777] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.180787] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.181614] ACPI: GPE 0x61 active on init
[    0.181643] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.185524] ACPI: Power Resource [USBC] (on)
[    0.186951] ACPI: Power Resource [WRST] (on)
[    0.186987] ACPI: Power Resource [DRST] (on)
[    0.187347] ACPI: Power Resource [PXP] (on)
[    0.192209] ACPI: Power Resource [V0PR] (on)
[    0.192354] ACPI: Power Resource [V1PR] (on)
[    0.192483] ACPI: Power Resource [V2PR] (on)
[    0.200279] ACPI: Power Resource [WRST] (on)
[    0.213555] ACPI: Power Resource [PIN] (off)
[    0.213850] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.213854] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.214934] acpi PNP0A08:00: _OSC: platform does not support [AER]
[    0.216964] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability]
[    0.218933] PCI host bridge to bus 0000:00
[    0.218935] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.218935] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.218936] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.218936] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.218937] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.218937] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.218938] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.218938] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.218939] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.218939] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.218940] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.218940] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.218941] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.218941] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.218942] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.218942] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.218943] pci_bus 0000:00: root bus resource [mem 0x6f800000-0xdfffffff window]
[    0.218944] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window]
[    0.218944] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.218945] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.218951] pci 0000:00:00.0: [8086:9b61] type 00 class 0x060000
[    0.219751] pci 0000:00:02.0: [8086:9b41] type 00 class 0x030000
[    0.219761] pci 0000:00:02.0: reg 0x10: [mem 0x604a000000-0x604affffff 64bit]
[    0.219766] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref]
[    0.219768] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.219779] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.220428] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.220438] pci 0000:00:04.0: reg 0x10: [mem 0x604b110000-0x604b117fff 64bit]
[    0.221110] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.221120] pci 0000:00:08.0: reg 0x10: [mem 0x604b124000-0x604b124fff 64bit]
[    0.221799] pci 0000:00:12.0: [8086:02f9] type 00 class 0x118000
[    0.221819] pci 0000:00:12.0: reg 0x10: [mem 0x604b123000-0x604b123fff 64bit]
[    0.222521] pci 0000:00:14.0: [8086:02ed] type 00 class 0x0c0330
[    0.222538] pci 0000:00:14.0: reg 0x10: [mem 0x604b100000-0x604b10ffff 64bit]
[    0.222595] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.223252] pci 0000:00:14.2: [8086:02ef] type 00 class 0x050000
[    0.223269] pci 0000:00:14.2: reg 0x10: [mem 0x604b11c000-0x604b11dfff 64bit]
[    0.223279] pci 0000:00:14.2: reg 0x18: [mem 0x604b122000-0x604b122fff 64bit]
[    0.223984] pci 0000:00:15.0: [8086:02e8] type 00 class 0x0c8000
[    0.224076] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.224914] pci 0000:00:15.1: [8086:02e9] type 00 class 0x0c8000
[    0.224982] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.225798] pci 0000:00:16.0: [8086:02e0] type 00 class 0x078000
[    0.225822] pci 0000:00:16.0: reg 0x10: [mem 0x604b11f000-0x604b11ffff 64bit]
[    0.225892] pci 0000:00:16.0: PME# supported from D3hot
[    0.226627] pci 0000:00:1c.0: [8086:02bc] type 01 class 0x060400
[    0.226689] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.226703] pci 0000:00:1c.0: PTM enabled (root), 4dns granularity
[    0.227388] pci 0000:00:1c.6: [8086:02be] type 01 class 0x060400
[    0.227450] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.227464] pci 0000:00:1c.6: PTM enabled (root), 4dns granularity
[    0.228130] pci 0000:00:1d.0: [8086:02b0] type 01 class 0x060400
[    0.228774] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.228787] pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
[    0.229460] pci 0000:00:1d.4: [8086:02b4] type 01 class 0x060400
[    0.229522] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[    0.229536] pci 0000:00:1d.4: PTM enabled (root), 4dns granularity
[    0.230213] pci 0000:00:1f.0: [8086:0284] type 00 class 0x060100
[    0.230930] pci 0000:00:1f.3: [8086:02c8] type 00 class 0x040380
[    0.230969] pci 0000:00:1f.3: reg 0x10: [mem 0x604b118000-0x604b11bfff 64bit]
[    0.231005] pci 0000:00:1f.3: reg 0x20: [mem 0x604b000000-0x604b0fffff 64bit]
[    0.231080] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.231780] pci 0000:00:1f.4: [8086:02a3] type 00 class 0x0c0500
[    0.231804] pci 0000:00:1f.4: reg 0x10: [mem 0x604b11e000-0x604b11e0ff 64bit]
[    0.231826] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.232483] pci 0000:00:1f.5: [8086:02a4] type 00 class 0x0c8000
[    0.232498] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.233209] pci 0000:01:00.0: [10ec:525a] type 00 class 0xff0000
[    0.233239] pci 0000:01:00.0: reg 0x14: [mem 0x9e300000-0x9e300fff]
[    0.233338] pci 0000:01:00.0: supports D1 D2
[    0.233338] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.244033] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.244038] pci 0000:00:1c.0:   bridge window [mem 0x9e300000-0x9e3fffff]
[    0.244324] pci 0000:02:00.0: [8086:2723] type 00 class 0x028000
[    0.244408] pci 0000:02:00.0: reg 0x10: [mem 0x9e200000-0x9e203fff 64bit]
[    0.244751] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.256142] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    0.256147] pci 0000:00:1c.6:   bridge window [mem 0x9e200000-0x9e2fffff]
[    0.256230] pci 0000:03:00.0: [8086:15d3] type 01 class 0x060400
[    0.256289] pci 0000:03:00.0: enabling Extended Tags
[    0.256374] pci 0000:03:00.0: supports D1 D2
[    0.256375] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.256485] pci 0000:00:1d.0: PCI bridge to [bus 03-70]
[    0.256490] pci 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    0.256495] pci 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    0.256592] pci 0000:04:00.0: [8086:15d3] type 01 class 0x060400
[    0.256656] pci 0000:04:00.0: enabling Extended Tags
[    0.256743] pci 0000:04:00.0: supports D1 D2
[    0.256744] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.256840] pci 0000:04:01.0: [8086:15d3] type 01 class 0x060400
[    0.256904] pci 0000:04:01.0: enabling Extended Tags
[    0.256990] pci 0000:04:01.0: supports D1 D2
[    0.256992] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.257085] pci 0000:04:02.0: [8086:15d3] type 01 class 0x060400
[    0.257148] pci 0000:04:02.0: enabling Extended Tags
[    0.257233] pci 0000:04:02.0: supports D1 D2
[    0.257235] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.257332] pci 0000:04:04.0: [8086:15d3] type 01 class 0x060400
[    0.257395] pci 0000:04:04.0: enabling Extended Tags
[    0.257482] pci 0000:04:04.0: supports D1 D2
[    0.257483] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.257600] pci 0000:03:00.0: PCI bridge to [bus 04-70]
[    0.257609] pci 0000:03:00.0:   bridge window [mem 0x70000000-0x9dffffff]
[    0.257616] pci 0000:03:00.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    0.257684] pci 0000:05:00.0: [8086:15d2] type 00 class 0x088000
[    0.257716] pci 0000:05:00.0: reg 0x10: [mem 0x9df00000-0x9df3ffff]
[    0.257725] pci 0000:05:00.0: reg 0x14: [mem 0x9df40000-0x9df40fff]
[    0.257776] pci 0000:05:00.0: enabling Extended Tags
[    0.257882] pci 0000:05:00.0: supports D1 D2
[    0.257883] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.258017] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.258026] pci 0000:04:00.0:   bridge window [mem 0x9df00000-0x9dffffff]
[    0.258085] pci 0000:04:01.0: PCI bridge to [bus 06-3a]
[    0.258094] pci 0000:04:01.0:   bridge window [mem 0x87000000-0x9defffff]
[    0.258101] pci 0000:04:01.0:   bridge window [mem 0x6025000000-0x6049ffffff 64bit pref]
[    0.258180] pci 0000:3b:00.0: [8086:15d4] type 00 class 0x0c0330
[    0.258218] pci 0000:3b:00.0: reg 0x10: [mem 0x86f00000-0x86f0ffff]
[    0.258301] pci 0000:3b:00.0: enabling Extended Tags
[    0.258408] pci 0000:3b:00.0: supports D1 D2
[    0.258409] pci 0000:3b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.258562] pci 0000:04:02.0: PCI bridge to [bus 3b]
[    0.258571] pci 0000:04:02.0:   bridge window [mem 0x86f00000-0x86ffffff]
[    0.258627] pci 0000:04:04.0: PCI bridge to [bus 3c-70]
[    0.258636] pci 0000:04:04.0:   bridge window [mem 0x70000000-0x86efffff]
[    0.258642] pci 0000:04:04.0:   bridge window [mem 0x6000000000-0x6024ffffff 64bit pref]
[    0.258736] pci 0000:71:00.0: [1179:011a] type 00 class 0x010802
[    0.258768] pci 0000:71:00.0: reg 0x10: [mem 0x9e100000-0x9e103fff 64bit]
[    0.268026] pci 0000:00:1d.4: PCI bridge to [bus 71]
[    0.268031] pci 0000:00:1d.4:   bridge window [mem 0x9e100000-0x9e1fffff]
[    0.290913] ACPI: EC: interrupt unblocked
[    0.290921] ACPI: EC: event unblocked
[    0.290938] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.290939] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[    0.291237] SCSI subsystem initialized
[    0.291247] libata version 3.00 loaded.
[    0.291247] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.291247] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.291247] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.291247] vgaarb: loaded
[    0.291247] ACPI: bus type USB registered
[    0.291247] usbcore: registered new interface driver usbfs
[    0.291247] usbcore: registered new interface driver hub
[    0.291247] usbcore: registered new device driver usb
[    0.291247] EDAC MC: Ver: 3.0.0
[    0.292626] Registered efivars operations
[    0.306432] PCI: Using ACPI for IRQ routing
[    0.335736] PCI: pci_cache_line_size set to 64 bytes
[    0.336025] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.336025] e820: reserve RAM buffer [mem 0x47571000-0x47ffffff]
[    0.336026] e820: reserve RAM buffer [mem 0x5e5fc000-0x5fffffff]
[    0.336029] e820: reserve RAM buffer [mem 0x48e800000-0x48fffffff]
[    0.336086] NetLabel: Initializing
[    0.336087] NetLabel:  domain hash size = 128
[    0.336087] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.336098] NetLabel:  unlabeled traffic allowed by default
[    0.336621] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.336628] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.340024] clocksource: Switched to clocksource hpet
[    0.347834] VFS: Disk quotas dquot_6.6.0
[    0.347844] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.347927] AppArmor: AppArmor Filesystem Enabled
[    0.347939] pnp: PnP ACPI init
[    0.348065] system 00:00: [mem 0x40000000-0x403fffff] has been reserved
[    0.348068] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.348217] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.348218] system 00:01: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.348219] system 00:01: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.348219] system 00:01: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.348220] system 00:01: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.348221] system 00:01: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.348222] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[    0.348223] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.348427] system 00:02: [io  0x2000-0x20fe] has been reserved
[    0.348428] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.348524] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.348525] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.348527] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.348539] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.348601] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.348602] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.348667] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.348677] pnp 00:07: Plug and Play ACPI device, IDs DLL0962 PNP0f13 (active)
[    0.349458] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.349459] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.349460] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.349460] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.349461] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.349462] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.349462] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.349463] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.349465] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.349863] system 00:09: [mem 0xfe038000-0xfe038fff] has been reserved
[    0.349864] system 00:09: [mem 0xfe036008-0xfe036fff] has been reserved
[    0.349865] system 00:09: [mem 0xfe037000-0xfe037fff] has been reserved
[    0.349866] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.352889] pnp: PnP ACPI: found 10 devices
[    0.363063] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.363090] pci 0000:04:01.0: bridge window [io  0x1000-0x0fff] to [bus 06-3a] add_size 1000
[    0.363104] pci 0000:04:04.0: bridge window [io  0x1000-0x0fff] to [bus 3c-70] add_size 1000
[    0.363111] pci 0000:03:00.0: bridge window [io  0x1000-0x0fff] to [bus 04-70] add_size 2000
[    0.363115] pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 03-70] add_size 2000
[    0.363125] pci 0000:00:15.0: BAR 0: assigned [mem 0x4010000000-0x4010000fff 64bit]
[    0.363173] pci 0000:00:15.1: BAR 0: assigned [mem 0x4010001000-0x4010001fff 64bit]
[    0.363220] pci 0000:00:1d.0: BAR 13: assigned [io  0x4000-0x5fff]
[    0.363221] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.363224] pci 0000:00:1c.0:   bridge window [mem 0x9e300000-0x9e3fffff]
[    0.363228] pci 0000:00:1c.6: PCI bridge to [bus 02]
[    0.363231] pci 0000:00:1c.6:   bridge window [mem 0x9e200000-0x9e2fffff]
[    0.363235] pci 0000:03:00.0: BAR 13: assigned [io  0x4000-0x5fff]
[    0.363236] pci 0000:04:01.0: BAR 13: assigned [io  0x4000-0x4fff]
[    0.363237] pci 0000:04:04.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.363237] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.363241] pci 0000:04:00.0:   bridge window [mem 0x9df00000-0x9dffffff]
[    0.363248] pci 0000:04:01.0: PCI bridge to [bus 06-3a]
[    0.363250] pci 0000:04:01.0:   bridge window [io  0x4000-0x4fff]
[    0.363253] pci 0000:04:01.0:   bridge window [mem 0x87000000-0x9defffff]
[    0.363256] pci 0000:04:01.0:   bridge window [mem 0x6025000000-0x6049ffffff 64bit pref]
[    0.363261] pci 0000:04:02.0: PCI bridge to [bus 3b]
[    0.363265] pci 0000:04:02.0:   bridge window [mem 0x86f00000-0x86ffffff]
[    0.363272] pci 0000:04:04.0: PCI bridge to [bus 3c-70]
[    0.363273] pci 0000:04:04.0:   bridge window [io  0x5000-0x5fff]
[    0.363277] pci 0000:04:04.0:   bridge window [mem 0x70000000-0x86efffff]
[    0.363280] pci 0000:04:04.0:   bridge window [mem 0x6000000000-0x6024ffffff 64bit pref]
[    0.363284] pci 0000:03:00.0: PCI bridge to [bus 04-70]
[    0.363286] pci 0000:03:00.0:   bridge window [io  0x4000-0x5fff]
[    0.363289] pci 0000:03:00.0:   bridge window [mem 0x70000000-0x9dffffff]
[    0.363292] pci 0000:03:00.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    0.363297] pci 0000:00:1d.0: PCI bridge to [bus 03-70]
[    0.363298] pci 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    0.363301] pci 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    0.363303] pci 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    0.363306] pci 0000:00:1d.4: PCI bridge to [bus 71]
[    0.363308] pci 0000:00:1d.4:   bridge window [mem 0x9e100000-0x9e1fffff]
[    0.363313] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.363313] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.363314] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.363314] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.363315] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.363316] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.363316] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.363317] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.363317] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.363318] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.363318] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.363319] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.363319] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.363320] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.363320] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.363321] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.363321] pci_bus 0000:00: resource 20 [mem 0x6f800000-0xdfffffff window]
[    0.363322] pci_bus 0000:00: resource 21 [mem 0x4000000000-0x7fffffffff window]
[    0.363323] pci_bus 0000:00: resource 22 [mem 0xfc800000-0xfe7fffff window]
[    0.363323] pci_bus 0000:01: resource 1 [mem 0x9e300000-0x9e3fffff]
[    0.363324] pci_bus 0000:02: resource 1 [mem 0x9e200000-0x9e2fffff]
[    0.363324] pci_bus 0000:03: resource 0 [io  0x4000-0x5fff]
[    0.363325] pci_bus 0000:03: resource 1 [mem 0x70000000-0x9e0fffff]
[    0.363325] pci_bus 0000:03: resource 2 [mem 0x6000000000-0x6049ffffff 64bit pref]
[    0.363326] pci_bus 0000:04: resource 0 [io  0x4000-0x5fff]
[    0.363327] pci_bus 0000:04: resource 1 [mem 0x70000000-0x9dffffff]
[    0.363327] pci_bus 0000:04: resource 2 [mem 0x6000000000-0x6049ffffff 64bit pref]
[    0.363328] pci_bus 0000:05: resource 1 [mem 0x9df00000-0x9dffffff]
[    0.363328] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    0.363329] pci_bus 0000:06: resource 1 [mem 0x87000000-0x9defffff]
[    0.363329] pci_bus 0000:06: resource 2 [mem 0x6025000000-0x6049ffffff 64bit pref]
[    0.363330] pci_bus 0000:3b: resource 1 [mem 0x86f00000-0x86ffffff]
[    0.363330] pci_bus 0000:3c: resource 0 [io  0x5000-0x5fff]
[    0.363331] pci_bus 0000:3c: resource 1 [mem 0x70000000-0x86efffff]
[    0.363331] pci_bus 0000:3c: resource 2 [mem 0x6000000000-0x6024ffffff 64bit pref]
[    0.363332] pci_bus 0000:71: resource 1 [mem 0x9e100000-0x9e1fffff]
[    0.363458] NET: Registered protocol family 2
[    0.363548] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.363743] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.363900] TCP: Hash tables configured (established 131072 bind 65536)
[    0.363926] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.363986] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.364117] NET: Registered protocol family 1
[    0.364124] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.364783] PCI: CLS 0 bytes, default 64
[    0.364807] Unpacking initramfs...
[    0.905773] Freeing initrd memory: 60092K
[    0.905836] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.905837] software IO TLB: mapped [mem 0x57dfb000-0x5bdfb000] (64MB)
[    0.906360] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f7c97c8, max_idle_ns: 440795273205 ns
[    0.906818] Scanning for low memory corruption every 60 seconds
[    0.907528] Initialise system trusted keyrings
[    0.907561] Key type blacklist registered
[    0.907685] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.908365] zbud: loaded
[    0.908725] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.908926] fuse init (API version 7.26)
[    0.915852] Key type asymmetric registered
[    0.915853] Asymmetric key parser 'x509' registered
[    0.915877] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.915996] io scheduler noop registered
[    0.915996] io scheduler deadline registered
[    0.916079] io scheduler cfq registered (default)
[    0.919736] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[    0.919759] pcieport 0000:00:1c.6: Signaling PME with IRQ 123
[    0.919769] pcieport 0000:00:1d.0: Signaling PME with IRQ 124
[    0.919779] pcieport 0000:00:1d.4: Signaling PME with IRQ 125
[    0.919790] dpc 0000:00:1c.0:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.919797] dpc 0000:00:1c.6:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.919804] dpc 0000:00:1d.0:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.919813] dpc 0000:00:1d.4:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.919820] pciehp 0000:00:1d.0:pcie004: Slot #8 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.919963] pciehp 0000:04:01.0:pcie204: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.920165] pciehp 0000:04:04.0:pcie204: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.920310] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.920339] efifb: probing for efifb
[    0.920346] efifb: framebuffer at 0x4000000000, using 32448k, total 32448k
[    0.920346] efifb: mode is 3840x2160x32, linelength=15360, pages=1
[    0.920346] efifb: scrolling: redraw
[    0.920347] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.920446] Console: switching to colour frame buffer device 480x135
[    0.920542] fb0: EFI VGA frame buffer device
[    0.920546] intel_idle: MWAIT substates: 0x11142120
[    0.920546] intel_idle: v0.4.1 model 0x8E
[    0.921183] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.922049] ACPI: AC Adapter [AC] (on-line)
[    0.922089] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.922207] ACPI: Lid Switch [LID0]
[    0.922221] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.922322] ACPI: Power Button [PBTN]
[    0.922335] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.922346] ACPI: Sleep Button [SBTN]
[    0.923999] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.929584] Linux agpgart interface v0.103
[    0.931868] loop: module loaded
[    0.932218] nvme nvme0: pci function 0000:71:00.0
[    0.932263] libphy: Fixed MDIO Bus: probed
[    0.932263] tun: Universal TUN/TAP device driver, 1.6
[    0.932395] PPP generic driver version 2.4.2
[    0.932479] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.932481] ehci-pci: EHCI PCI platform driver
[    0.932486] ehci-platform: EHCI generic platform driver
[    0.932492] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.932492] ohci-pci: OHCI PCI platform driver
[    0.932497] ohci-platform: OHCI generic platform driver
[    0.932501] uhci_hcd: USB Universal Host Controller Interface driver
[    0.932922] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.932925] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.934257] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    0.934262] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.934504] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.934505] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.934505] usb usb1: Product: xHCI Host Controller
[    0.934506] usb usb1: Manufacturer: Linux 4.15.0-1064-oem xhci-hcd
[    0.934506] usb usb1: SerialNumber: 0000:00:14.0
[    0.934805] hub 1-0:1.0: USB hub found
[    0.934820] hub 1-0:1.0: 12 ports detected
[    0.936980] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.936981] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.936982] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.937028] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.937029] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.937029] usb usb2: Product: xHCI Host Controller
[    0.937030] usb usb2: Manufacturer: Linux 4.15.0-1064-oem xhci-hcd
[    0.937030] usb usb2: SerialNumber: 0000:00:14.0
[    0.937127] hub 2-0:1.0: USB hub found
[    0.937135] hub 2-0:1.0: 6 ports detected
[    0.938039] usb: port power management may be unreliable
[    0.938329] random: fast init done
[    0.938884] xhci_hcd 0000:3b:00.0: xHCI Host Controller
[    0.938886] xhci_hcd 0000:3b:00.0: new USB bus registered, assigned bus number 3
[    0.940301] xhci_hcd 0000:3b:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000200009810
[    0.940613] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.940614] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.940614] usb usb3: Product: xHCI Host Controller
[    0.940615] usb usb3: Manufacturer: Linux 4.15.0-1064-oem xhci-hcd
[    0.940615] usb usb3: SerialNumber: 0000:3b:00.0
[    0.941034] hub 3-0:1.0: USB hub found
[    0.941040] hub 3-0:1.0: 2 ports detected
[    0.941349] xhci_hcd 0000:3b:00.0: xHCI Host Controller
[    0.941351] xhci_hcd 0000:3b:00.0: new USB bus registered, assigned bus number 4
[    0.941352] xhci_hcd 0000:3b:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.941388] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.941389] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.941389] usb usb4: Product: xHCI Host Controller
[    0.941390] usb usb4: Manufacturer: Linux 4.15.0-1064-oem xhci-hcd
[    0.941390] usb usb4: SerialNumber: 0000:3b:00.0
[    0.941494] hub 4-0:1.0: USB hub found
[    0.941503] hub 4-0:1.0: 2 ports detected
[    0.942280] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.943208] i8042: Warning: Keylock active
[    0.946147] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.946167] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.946412] mousedev: PS/2 mouse device common for all mice
[    0.946981] rtc_cmos 00:04: RTC can wake from S4
[    0.948082] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.948282] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.948285] i2c /dev entries driver
[    0.948335] device-mapper: uevent: version 1.0.3
[    0.948436] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.948458] intel_pstate: Intel P-state driver initializing
[    0.948707] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.951814] intel_pstate: HWP enabled
[    0.952530] ledtrig-cpu: registered to indicate activity on CPUs
[    0.952532] EFI Variables Facility v0.08 2004-May-17
[    0.972469] intel_pmc_core:  initialized
[    0.972598] NET: Registered protocol family 10
[    0.976503] Segment Routing with IPv6
[    0.976515] NET: Registered protocol family 17
[    0.976672] Key type dns_resolver registered
[    0.977710] mce: Using 10 MCE banks
[    0.977715] RAS: Correctable Errors collector initialized.
[    0.977763] microcode: sig=0x806ec, pf=0x4, revision=0xca
[    0.978031] microcode: Microcode Update Driver: v2.2.
[    0.978036] sched_clock: Marking stable (978017693, 0)->(963310909, 14706784)
[    0.978947] registered taskstats version 1
[    0.978953] Loading compiled-in X.509 certificates
[    0.980590] Loaded X.509 cert 'Build time autogenerated kernel key: fe59e3c21ebfa238e674e983b1d9f6b6e2c77621'
[    0.981195] Loaded UEFI:db cert 'Dell Inc.: Dell Bios DB Key: 637fa7a9f74471b406de0511557071fd41dd5487' linked to secondary sys keyring
[    0.981218] Loaded UEFI:db cert 'Dell Inc.: Dell Bios FW Aux Authority 2018: dd4df7c3f5ce7e5a77847915abc37b031f6b10bd' linked to secondary sys keyring
[    0.981227] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[    0.981237] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[    0.981420] Couldn't get size: 0x800000000000000e
[    0.981421] MODSIGN: Couldn't get UEFI MokListRT
[    0.981974] zswap: loaded using pool lzo/zbud
[    0.983497] ACPI: Battery Slot [BAT0] (battery present)
[    0.985183] Key type big_key registered
[    0.985185] Key type trusted registered
[    0.986287] Key type encrypted registered
[    0.986289] AppArmor: AppArmor sha1 policy hashing enabled
[    0.986298] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.986301] ima: Allocated hash algorithm: sha1
[    0.986309] evm: HMAC attrs: 0x1
[    0.987440]   Magic number: 11:539:892
[    0.987478] pci 0000:00:1f.5: hash matches
[    0.987783] rtc_cmos 00:04: setting system clock to 2019-11-21 15:52:23 UTC (1574351543)
[    0.987851] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.987852] EDD information not available.
[    0.989291] Freeing unused kernel image memory: 2432K
[    1.044238] Write protecting the kernel read-only data: 20480k
[    1.045000] Freeing unused kernel image memory: 2008K
[    1.045200] Freeing unused kernel image memory: 1868K
[    1.049469] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.059114] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.059176] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.059180] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.150833] hidraw: raw HID events driver (C) Jiri Kosina
[    1.155577] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    1.155633] wmi_bus wmi_bus-PNP0C14:03: WQBC data block query control method not found
[    1.155634] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    1.155659]  nvme0n1: p1 p2 p3
[    1.161633] rtsx_pci 0000:01:00.0: enabling device (0000 -> 0002)
[    1.164761] thunderbolt 0000:05:00.0: enabling device (0000 -> 0002)
[    1.165915] thunderbolt 0000:05:00.0: NHI initialized, starting thunderbolt
[    1.165918] thunderbolt 0000:05:00.0: allocating TX ring 0 of size 10
[    1.165951] thunderbolt 0000:05:00.0: allocating RX ring 0 of size 10
[    1.165985] thunderbolt 0000:05:00.0: control channel created
[    1.165986] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    1.165987] thunderbolt 0000:05:00.0: control channel starting...
[    1.165988] thunderbolt 0000:05:00.0: starting TX ring 0
[    1.166006] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[    1.166007] thunderbolt 0000:05:00.0: starting RX ring 0
[    1.166013] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[    1.166112] acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[    1.262915] [drm] Memory usable by graphics device = 4096M
[    1.262917] checking generic (4000000000 1fb0000) vs hw (4000000000 10000000)
[    1.262917] fb: switching to inteldrmfb from EFI VGA
[    1.262930] Console: switching to colour dummy device 80x25
[    1.263107] [drm] Replacing VGA console driver
[    1.269335] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.269336] [drm] Driver supports precise vblank timestamp query.
[    1.269366] [drm:intel_bios_init [i915]] *ERROR* Unexpected child device config size 39 (expected 38 for VBT version 228)
[    1.271516] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.271940] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[    1.276085] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[    1.284346] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    1.444629] usb 1-5: New USB device found, idVendor=0c45, idProduct=6723
[    1.444630] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.444631] usb 1-5: Product: Integrated_Webcam_HD
[    1.444632] usb 1-5: Manufacturer: CN09357G8LG00993ALXYA01
[    1.576085] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    1.712392] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.713085] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.729615] usb 1-7: New USB device found, idVendor=8087, idProduct=0029
[    1.729616] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.792390] fbcon: inteldrmfb (fb0) is primary device
[    1.792484] Console: switching to colour frame buffer device 430x90
[    1.792548] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.916594] clocksource: Switched to clocksource tsc
[    1.991917] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734]
[    2.020112] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..]
[    2.020115] psmouse serio1: synaptics: Your touchpad (PNP: DLL0962 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    2.076507] psmouse serio1: synaptics: Touchpad model: 1, fw: 9.16, id: 0x1e2a1, caps: 0xf00323/0x840300/0x12e800/0x500000, board id: 3038, fw id: 2767034
[    2.111726] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.524679] thunderbolt 0000:05:00.0: current switch config:
[    2.524680] thunderbolt 0000:05:00.0:  Switch: 8086:15d3 (Revision: 6, TB Version: 2)
[    2.524681] thunderbolt 0000:05:00.0:   Max Port Number: 11
[    2.524681] thunderbolt 0000:05:00.0:   Config:
[    2.524696] thunderbolt 0000:05:00.0:    Upstream Port Number: 5 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 254ms
[    2.524697] thunderbolt 0000:05:00.0:    unknown1: 0x0 unknown4: 0x0
[    2.567959] thunderbolt 0000:05:00.0: 0: uid: 0xd410e424810b00
[    2.569367] thunderbolt 0000:05:00.0:  Port 0: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[    2.569367] thunderbolt 0000:05:00.0:   Max hop id (in/out): 7/7
[    2.569368] thunderbolt 0000:05:00.0:   Max counters: 8
[    2.569368] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    2.569878] thunderbolt 0000:05:00.0:  Port 1: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[    2.569879] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    2.569879] thunderbolt 0000:05:00.0:   Max counters: 16
[    2.569880] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[    2.570390] thunderbolt 0000:05:00.0:  Port 2: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[    2.570391] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    2.570391] thunderbolt 0000:05:00.0:   Max counters: 16
[    2.570391] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[    2.570902] thunderbolt 0000:05:00.0:  Port 3: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[    2.570903] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    2.570903] thunderbolt 0000:05:00.0:   Max counters: 16
[    2.570903] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800000
[    2.571414] thunderbolt 0000:05:00.0:  Port 4: 8086:15d3 (Revision: 6, TB Version: 1, Type: Port (0x1))
[    2.571415] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    2.571415] thunderbolt 0000:05:00.0:   Max counters: 16
[    2.571415] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[    2.571416] thunderbolt 0000:05:00.0: 0:5: disabled by eeprom
[    2.571542] thunderbolt 0000:05:00.0:  Port 6: 8086:15d3 (Revision: 6, TB Version: 1, Type: PCIe (0x100101))
[    2.571543] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[    2.571543] thunderbolt 0000:05:00.0:   Max counters: 2
[    2.571544] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    2.571670] thunderbolt 0000:05:00.0:  Port 7: 8086:15d3 (Revision: 6, TB Version: 1, Type: PCIe (0x100101))
[    2.571671] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[    2.571671] thunderbolt 0000:05:00.0:   Max counters: 2
[    2.571672] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    2.571798] thunderbolt 0000:05:00.0:  Port 8: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
[    2.571799] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[    2.571799] thunderbolt 0000:05:00.0:   Max counters: 2
[    2.571800] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    2.571926] thunderbolt 0000:05:00.0:  Port 9: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0101))
[    2.571927] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[    2.571927] thunderbolt 0000:05:00.0:   Max counters: 2
[    2.571927] thunderbolt 0000:05:00.0:   NFC Credits: 0x1000000
[    2.572055] thunderbolt 0000:05:00.0:  Port 10: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0101))
[    2.572055] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[    2.572055] thunderbolt 0000:05:00.0:   Max counters: 2
[    2.572056] thunderbolt 0000:05:00.0:   NFC Credits: 0x100000c
[    2.572183] thunderbolt 0000:05:00.0:  Port 11: 8086:15d3 (Revision: 6, TB Version: 1, Type: DP/HDMI (0xe0102))
[    2.572183] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[    2.572183] thunderbolt 0000:05:00.0:   Max counters: 2
[    2.572184] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    2.574876] thunderbolt 0000:05:00.0: current switch config:
[    2.574877] thunderbolt 0000:05:00.0:  Switch: 8086:1578 (Revision: 4, TB Version: 2)
[    2.574878] thunderbolt 0000:05:00.0:   Max Port Number: 11
[    2.574879] thunderbolt 0000:05:00.0:   Config:
[    2.574880] thunderbolt 0000:05:00.0:    Upstream Port Number: 1 Depth: 1 Route String: 0x3 Enabled: 1, PlugEventsDelay: 254ms
[    2.574881] thunderbolt 0000:05:00.0:    unknown1: 0x0 unknown4: 0x0
[    2.592952] thunderbolt 0000:05:00.0: 3: reading drom (length: 0x6e)
[    2.643251] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[    2.643252] CPU6: Core temperature above threshold, cpu clock throttled (total events = 1)
[    2.643275] CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.643277] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.643279] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.643280] CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.643280] CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.643281] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.643282] CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.643282] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[    2.668004] raid6: sse2x1   gen() 15652 MB/s
[    2.669183] CPU2: Core temperature/speed normal
[    2.669184] CPU2: Package temperature/speed normal
[    2.669184] CPU6: Core temperature/speed normal
[    2.669184] CPU6: Package temperature/speed normal
[    2.669221] CPU5: Package temperature/speed normal
[    2.669221] CPU1: Package temperature/speed normal
[    2.669222] CPU0: Package temperature/speed normal
[    2.669223] CPU7: Package temperature/speed normal
[    2.669223] CPU3: Package temperature/speed normal
[    2.669224] CPU4: Package temperature/speed normal
[    2.716004] raid6: sse2x1   xor() 11166 MB/s
[    2.764004] raid6: sse2x2   gen() 18777 MB/s
[    2.780678] [drm] RC6 on
[    2.812004] raid6: sse2x2   xor() 12784 MB/s
[    2.860003] raid6: sse2x4   gen() 21575 MB/s
[    2.908003] raid6: sse2x4   xor() 13944 MB/s
[    2.956004] raid6: avx2x1   gen() 28378 MB/s
[    3.004004] raid6: avx2x1   xor() 19774 MB/s
[    3.052036] raid6: avx2x2   gen() 32270 MB/s
[    3.100002] raid6: avx2x2   xor() 21826 MB/s
[    3.148002] raid6: avx2x4   gen() 35548 MB/s
[    3.196003] raid6: avx2x4   xor() 19976 MB/s
[    3.196004] raid6: using algorithm avx2x4 gen() 35548 MB/s
[    3.196004] raid6: .... xor() 19976 MB/s, rmw enabled
[    3.196005] raid6: using avx2x2 recovery algorithm
[    3.196834] xor: automatically using best checksumming function   avx       
[    3.197547] async_tx: api initialized (async)
[    3.335316] random: crng init done
[    3.335317] random: 7 urandom warning(s) missed due to ratelimiting
[    3.484589] Btrfs loaded, crc32c=crc32c-intel
[    3.520275] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
[    3.535730] thunderbolt 0000:05:00.0: 3: drom data crc32 mismatch (expected: 0xaf438340, got: 0xaf4383c0), continuing
[    3.536494] thunderbolt 0000:05:00.0: 3: uid: 0xd45f2f9db08200
[    3.536622] thunderbolt 0000:05:00.0:  Port 0: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    3.536623] thunderbolt 0000:05:00.0:   Max hop id (in/out): 7/7
[    3.536623] thunderbolt 0000:05:00.0:   Max counters: 8
[    3.536624] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    3.537133] thunderbolt 0000:05:00.0:  Port 1: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    3.537134] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    3.537134] thunderbolt 0000:05:00.0:   Max counters: 16
[    3.537135] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800048
[    3.537647] thunderbolt 0000:05:00.0:  Port 2: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    3.537647] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    3.537648] thunderbolt 0000:05:00.0:   Max counters: 16
[    3.537648] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[    3.538157] thunderbolt 0000:05:00.0:  Port 3: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    3.538158] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    3.538158] thunderbolt 0000:05:00.0:   Max counters: 16
[    3.538158] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800000
[    3.538669] thunderbolt 0000:05:00.0:  Port 4: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    3.538669] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    3.538670] thunderbolt 0000:05:00.0:   Max counters: 16
[    3.538670] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[    3.538671] thunderbolt 0000:05:00.0: 3:5: disabled by eeprom
[    3.538797] thunderbolt 0000:05:00.0:  Port 6: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100102))
[    3.538798] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[    3.538798] thunderbolt 0000:05:00.0:   Max counters: 2
[    3.538798] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    3.538925] thunderbolt 0000:05:00.0:  Port 7: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100101))
[    3.538926] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[    3.538926] thunderbolt 0000:05:00.0:   Max counters: 2
[    3.538926] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    3.538927] thunderbolt 0000:05:00.0: 3:8: disabled by eeprom
[    3.538927] thunderbolt 0000:05:00.0: 3:9: disabled by eeprom
[    3.538928] thunderbolt 0000:05:00.0: 3:a: disabled by eeprom
[    3.538928] thunderbolt 0000:05:00.0: 3:b: disabled by eeprom
[    3.540468] thunderbolt 0000:05:00.0: current switch config:
[    3.540469] thunderbolt 0000:05:00.0:  Switch: 8086:1578 (Revision: 4, TB Version: 2)
[    3.540469] thunderbolt 0000:05:00.0:   Max Port Number: 11
[    3.540470] thunderbolt 0000:05:00.0:   Config:
[    3.540471] thunderbolt 0000:05:00.0:    Upstream Port Number: 1 Depth: 2 Route String: 0x303 Enabled: 1, PlugEventsDelay: 254ms
[    3.540471] thunderbolt 0000:05:00.0:    unknown1: 0x0 unknown4: 0x0
[    3.558261] thunderbolt 0000:05:00.0: 303: reading drom (length: 0x75)
[    3.585709] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.618570] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    3.636216] systemd[1]: Detected architecture x86-64.
[    3.637813] systemd[1]: Set hostname to <davittoria>.
[    3.678245] systemd[1]: Reached target Remote File Systems.
[    3.678373] systemd[1]: Created slice System Slice.
[    3.678409] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.678428] systemd[1]: Listening on udev Kernel Socket.
[    3.678487] systemd[1]: Listening on Journal Audit Socket.
[    3.678545] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.678570] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.685368] EXT4-fs (nvme0n1p3): re-mounted. Opts: errors=remount-ro
[    3.694696] lp: driver loaded but no devices found
[    3.704807] ppdev: user-space parallel port driver
[    3.751312] systemd-journald[401]: Received request to flush runtime journal from PID 1
[    3.775095] input: Intel HID events as /devices/platform/INT33D5:00/input/input7
[    3.824687] PKCS#7 signature not signed with a trusted key
[    3.824700] compat: loading out-of-tree module taints kernel.
[    3.824715] compat: module verification failed: signature and/or required key missing - tainting kernel
[    3.825231] Loading modules backported from iwlwifi
[    3.825231] iwlwifi-stack-public:master:7841:0462ac85
[    3.832020] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    3.834049] PKCS#7 signature not signed with a trusted key
[    3.841757] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.842753] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    3.845966] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.852040] PKCS#7 signature not signed with a trusted key
[    3.853853] Intel(R) Wireless WiFi driver for Linux
[    3.853853] Copyright(c) 2003- 2015 Intel Corporation
[    3.854088] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[    3.862461] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    3.863821] iwlwifi 0000:02:00.0: Direct firmware load for iwl-dbg-cfg.ini failed with error -2
[    3.863836] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-50.ucode failed with error -2
[    3.863844] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-49.ucode failed with error -2
[    3.863851] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-48.ucode failed with error -2
[    3.863858] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-47.ucode failed with error -2
[    3.866005] iwlwifi 0000:02:00.0: loaded firmware version 46.3cfab8da.0 op_mode iwlmvm
[    3.867422] input: Dell WMI hotkeys as /devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input8
[    3.873162] PKCS#7 signature not signed with a trusted key
[    3.937004] i2c_hid i2c-ELAN2934:00: i2c-ELAN2934:00 supply vdd not found, using dummy regulator
[    3.940468] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    3.940469] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.940470] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.940471] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.940471] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.940472] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    3.943557] PKCS#7 signature not signed with a trusted key
[    3.944543] iwlwifi 0000:02:00.0: Detected Killer(R) Wi-Fi 6 AX1650w 160MHz Wireless Network Adapter (200D2W), REV=0x340
[    3.951246] AVX2 version of gcm_enc/dec engaged.
[    3.951247] AES CTR mode by8 optimization enabled
[    3.968308] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    3.968314] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    3.968321] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    3.968324] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    3.987806] intel_rapl: Found RAPL domain package
[    3.987807] intel_rapl: Found RAPL domain core
[    3.987808] intel_rapl: Found RAPL domain uncore
[    3.987808] intel_rapl: Found RAPL domain dram
[    4.001674] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    4.001676] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    4.001679] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    4.001681] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    4.032096] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    4.033206] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    4.044036] thunderbolt 0-303: ignoring unnecessary extra entries in DROM
[    4.044040] thunderbolt 0000:05:00.0: 303: uid: 0x8086461d6849d310
[    4.044206] thunderbolt 0000:05:00.0:  Port 0: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    4.044207] thunderbolt 0000:05:00.0:   Max hop id (in/out): 7/7
[    4.044208] thunderbolt 0000:05:00.0:   Max counters: 8
[    4.044209] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    4.044676] thunderbolt 0000:05:00.0:  Port 1: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    4.044677] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    4.044677] thunderbolt 0000:05:00.0:   Max counters: 16
[    4.044678] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800000
[    4.045187] thunderbolt 0000:05:00.0:  Port 2: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    4.045188] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    4.045189] thunderbolt 0000:05:00.0:   Max counters: 16
[    4.045190] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[    4.045699] thunderbolt 0000:05:00.0:  Port 3: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    4.045701] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    4.045701] thunderbolt 0000:05:00.0:   Max counters: 16
[    4.045702] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[    4.046672] thunderbolt 0000:05:00.0:  Port 4: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[    4.046673] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[    4.046674] thunderbolt 0000:05:00.0:   Max counters: 16
[    4.046676] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[    4.046677] thunderbolt 0000:05:00.0: 303:5: disabled by eeprom
[    4.046798] thunderbolt 0000:05:00.0:  Port 6: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100102))
[    4.046799] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[    4.046800] thunderbolt 0000:05:00.0:   Max counters: 2
[    4.046801] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    4.046927] thunderbolt 0000:05:00.0:  Port 7: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100101))
[    4.046929] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[    4.046929] thunderbolt 0000:05:00.0:   Max counters: 2
[    4.046930] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    4.047054] thunderbolt 0000:05:00.0:  Port 8: 8086:1578 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0102))
[    4.047055] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[    4.047056] thunderbolt 0000:05:00.0:   Max counters: 2
[    4.047056] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[    4.047057] thunderbolt 0000:05:00.0: 303:9: disabled by eeprom
[    4.047184] thunderbolt 0000:05:00.0:  Port 10: 8086:1578 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0101))
[    4.047185] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[    4.047186] thunderbolt 0000:05:00.0:   Max counters: 2
[    4.047186] thunderbolt 0000:05:00.0:   NFC Credits: 0x1000000
[    4.047187] thunderbolt 0000:05:00.0: 303:b: disabled by eeprom
[    4.097556] audit: type=1400 audit(1574351546.604:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=754 comm="apparmor_parser"
[    4.097595] audit: type=1400 audit(1574351546.604:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=756 comm="apparmor_parser"
[    4.098003] audit: type=1400 audit(1574351546.604:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=752 comm="apparmor_parser"
[    4.098005] audit: type=1400 audit(1574351546.604:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=752 comm="apparmor_parser"
[    4.098007] audit: type=1400 audit(1574351546.604:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=752 comm="apparmor_parser"
[    4.098040] audit: type=1400 audit(1574351546.604:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=753 comm="apparmor_parser"
[    4.098325] audit: type=1400 audit(1574351546.604:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/8039/usr/lib/snapd/snap-confine" pid=750 comm="apparmor_parser"
[    4.098327] audit: type=1400 audit(1574351546.604:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/8039/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=750 comm="apparmor_parser"
[    4.099710] audit: type=1400 audit(1574351546.604:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=757 comm="apparmor_parser"
[    4.107651] i2c_hid i2c-CUST0001:00: i2c-CUST0001:00 supply vdd not found, using dummy regulator
[    4.123231] iwlwifi 0000:02:00.0: base HW address: 04:ed:33:c1:16:55
[    4.137004] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    4.137007] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    4.137015] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    4.137018] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    4.162318] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    4.162321] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    4.162331] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    4.162346] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    4.171756] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    4.202052] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[    4.202192] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    4.202371] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.249415] Adding 33554428k swap on /swapfile.  Priority:-2 extents:26 across:35864572k SSFS
[    4.266567] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    4.266584] thermal thermal_zone8: failed to read out thermal zone (-61)
[    4.266625] Unable to register with Frequency Manager: -22
[    4.267965] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    4.268285] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3271: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    4.268286] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.268287] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    4.268287] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.268288] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.268289] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[    4.268290] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1b
[    4.268291] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    4.277927] input: ELAN2934:00 04F3:2934 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-8/i2c-ELAN2934:00/0018:04F3:2934.0001/input/input9
[    4.278023] hid-multitouch 0018:04F3:2934.0001: input,hidraw0: I2C HID v1.00 Device [ELAN2934:00 04F3:2934] on i2c-ELAN2934:00
[    4.286219] input: CUST0001:00 06CB:76AF Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-CUST0001:00/0018:06CB:76AF.0002/input/input15
[    4.286275] hid-multitouch 0018:06CB:76AF.0002: input,hidraw1: I2C HID v1.00 Mouse [CUST0001:00 06CB:76AF] on i2c-CUST0001:00
[    4.348209] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    4.348212] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    4.348215] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    4.348218] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    4.360792] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[    4.360828] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    4.360856] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    4.360884] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    4.360911] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    4.360939] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[    4.407321] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    4.407325] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    4.407329] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    4.407331] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    4.556417] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    4.556421] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    4.556426] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    4.556430] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    4.566968] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    4.566972] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    4.566976] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    4.566984] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    4.591371] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    4.704224] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    4.704226] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    4.704229] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    4.704231] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    4.744624] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    4.744627] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    4.744630] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    4.744633] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    4.784453] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    4.842766] Bluetooth: Core ver 2.22
[    4.842798] NET: Registered protocol family 31
[    4.842799] Bluetooth: HCI device and connection manager initialized
[    4.842801] Bluetooth: HCI socket layer initialized
[    4.842803] Bluetooth: L2CAP socket layer initialized
[    4.842807] Bluetooth: SCO socket layer initialized
[    4.843691] media: Linux media interface: v0.10
[    4.847502] Linux video capture interface: v2.00
[    4.877604] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    4.900276] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    4.900279] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    4.900282] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    4.900284] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    4.944615] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    4.944618] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    4.944621] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    4.944623] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    4.992269] usbcore: registered new interface driver btusb
[    4.992698] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017
[    4.993709] Bluetooth: hci0: Device revision is 1
[    4.993710] Bluetooth: hci0: Secure boot is enabled
[    4.993710] Bluetooth: hci0: OTP lock is enabled
[    4.993710] Bluetooth: hci0: API lock is enabled
[    4.993711] Bluetooth: hci0: Debug lock is disabled
[    4.993711] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    4.994537] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
[    5.009200] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6723)
[    5.010862] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[    5.010863] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[    5.010864] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[    5.010865] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[    5.010919] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input26
[    5.011012] usbcore: registered new interface driver uvcvideo
[    5.011013] USB Video Class driver (1.1.1)
[    5.051118] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.051119] Bluetooth: BNEP filters: protocol multicast
[    5.051121] Bluetooth: BNEP socket layer initialized
[    5.084696] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    5.084699] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    5.084705] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    5.084707] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    5.132721] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    5.132723] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    5.132726] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    5.132729] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    5.256295] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    5.256298] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    5.256307] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    5.256310] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    5.310765] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    5.310768] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    5.310774] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    5.310776] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    5.464291] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    5.464294] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    5.464298] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    5.464300] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    5.476496] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[    5.476499] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[    5.476502] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[    5.476504] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[    6.458062] Bluetooth: hci0: Waiting for firmware download to complete
[    6.458689] Bluetooth: hci0: Firmware loaded in 1432059 usecs
[    6.458789] Bluetooth: hci0: Waiting for device to boot
[    6.471700] Bluetooth: hci0: Device booted in 12662 usecs
[    6.472086] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc
[    6.486722] Bluetooth: hci0: Applying Intel DDC parameters completed
[    6.541244] Bluetooth: RFCOMM TTY layer initialized
[    6.541248] Bluetooth: RFCOMM socket layer initialized
[    6.541251] Bluetooth: RFCOMM ver 1.11
[    6.656887] rfkill: input handler disabled
[    8.111600] wlp2s0: authenticate with 6c:f3:7f:10:93:4a
[    8.116962] wlp2s0: send auth to 6c:f3:7f:10:93:4a (try 1/3)
[    8.142605] wlp2s0: authenticated
[    8.144062] wlp2s0: associate with 6c:f3:7f:10:93:4a (try 1/3)
[    8.147233] wlp2s0: RX AssocResp from 6c:f3:7f:10:93:4a (capab=0x401 status=0 aid=1)
[    8.151984] wlp2s0: associated
[    8.152176] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   19.933636] thunderbolt 0000:05:00.0: stopping RX ring 0
[   19.933651] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[   19.933673] thunderbolt 0000:05:00.0: stopping TX ring 0
[   19.933683] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[   19.933695] thunderbolt 0000:05:00.0: control channel stopped
[   27.166386] dpc 0000:00:1d.0:pcie008: DPC containment event, status:0x1f00 source:0x0000
[   27.352135] thunderbolt 0000:05:00.0: control channel starting...
[   27.352138] thunderbolt 0000:05:00.0: starting TX ring 0
[   27.352145] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[   27.352146] thunderbolt 0000:05:00.0: starting RX ring 0
[   27.352153] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[   27.388547] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   27.388549] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   27.388553] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   27.388555] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   27.600244] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   27.600247] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   27.600253] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   27.600258] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   27.636850] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   27.636855] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   27.636863] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   27.636866] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   27.772406] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   27.772410] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   27.772419] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   27.772424] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   27.784881] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   27.784885] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   27.784891] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   27.784895] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   27.932305] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   27.932309] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   27.932315] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   27.932319] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   27.944833] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   27.944837] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   27.944842] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   27.944848] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   29.912741] dpc 0000:00:1d.0:pcie008: DPC containment event, status:0x1f00 source:0x0000
[   29.932263] dpc 0000:00:1d.0:pcie008: DPC containment event, status:0x1f00 source:0x0000
[   29.996500] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   29.996503] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   29.996512] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   29.996515] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   30.064920] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   30.064925] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   30.064931] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   30.064934] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   31.464322] thunderbolt 0000:05:00.0: current switch config:
[   31.464325] thunderbolt 0000:05:00.0:  Switch: 8086:1578 (Revision: 4, TB Version: 2)
[   31.464327] thunderbolt 0000:05:00.0:   Max Port Number: 11
[   31.464329] thunderbolt 0000:05:00.0:   Config:
[   31.464331] thunderbolt 0000:05:00.0:    Upstream Port Number: 1 Depth: 1 Route String: 0x3 Enabled: 1, PlugEventsDelay: 254ms
[   31.464333] thunderbolt 0000:05:00.0:    unknown1: 0x0 unknown4: 0x0
[   31.504329] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   31.504333] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   31.504342] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   31.504346] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   31.528658] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   31.528664] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   31.528667] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   31.528670] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   31.568639] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   31.568665] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   31.568669] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   31.568671] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   31.688738] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   31.688740] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   31.688744] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   31.688746] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   31.728716] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   31.728746] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   31.728749] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   31.728775] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   31.832296] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   31.832300] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   31.832306] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   31.832309] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   31.856606] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   31.856608] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   31.856614] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   31.856617] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   32.052382] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   32.052386] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   32.052393] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   32.052396] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   32.080581] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   32.080584] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   32.080587] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   32.080589] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   32.224561] thunderbolt 0000:05:00.0: 3: reading drom (length: 0x6e)
[   32.601413] thunderbolt 0000:05:00.0: 3: drom data crc32 mismatch (expected: 0xaf438340, got: 0xaf4383c0), continuing
[   32.602180] thunderbolt 0000:05:00.0: 3: uid: 0xd45f2f9db08200
[   32.602309] thunderbolt 0000:05:00.0:  Port 0: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   32.602309] thunderbolt 0000:05:00.0:   Max hop id (in/out): 7/7
[   32.602310] thunderbolt 0000:05:00.0:   Max counters: 8
[   32.602310] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[   32.602820] thunderbolt 0000:05:00.0:  Port 1: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   32.602821] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   32.602821] thunderbolt 0000:05:00.0:   Max counters: 16
[   32.602822] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800048
[   32.603332] thunderbolt 0000:05:00.0:  Port 2: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   32.603332] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   32.603333] thunderbolt 0000:05:00.0:   Max counters: 16
[   32.603333] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[   32.603844] thunderbolt 0000:05:00.0:  Port 3: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   32.603844] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   32.603845] thunderbolt 0000:05:00.0:   Max counters: 16
[   32.603845] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800000
[   32.604358] thunderbolt 0000:05:00.0:  Port 4: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   32.604359] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   32.604360] thunderbolt 0000:05:00.0:   Max counters: 16
[   32.604361] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[   32.604362] thunderbolt 0000:05:00.0: 3:5: disabled by eeprom
[   32.604488] thunderbolt 0000:05:00.0:  Port 6: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100102))
[   32.604489] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[   32.604490] thunderbolt 0000:05:00.0:   Max counters: 2
[   32.604491] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[   32.604613] thunderbolt 0000:05:00.0:  Port 7: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100101))
[   32.604614] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[   32.604615] thunderbolt 0000:05:00.0:   Max counters: 2
[   32.604616] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[   32.604617] thunderbolt 0000:05:00.0: 3:8: disabled by eeprom
[   32.604618] thunderbolt 0000:05:00.0: 3:9: disabled by eeprom
[   32.604619] thunderbolt 0000:05:00.0: 3:a: disabled by eeprom
[   32.604619] thunderbolt 0000:05:00.0: 3:b: disabled by eeprom
[   32.607873] thunderbolt 0000:05:00.0: current switch config:
[   32.607875] thunderbolt 0000:05:00.0:  Switch: 8086:1578 (Revision: 4, TB Version: 2)
[   32.607876] thunderbolt 0000:05:00.0:   Max Port Number: 11
[   32.607877] thunderbolt 0000:05:00.0:   Config:
[   32.607879] thunderbolt 0000:05:00.0:    Upstream Port Number: 1 Depth: 2 Route String: 0x303 Enabled: 1, PlugEventsDelay: 254ms
[   32.607880] thunderbolt 0000:05:00.0:    unknown1: 0x0 unknown4: 0x0
[   32.628563] thunderbolt 0000:05:00.0: 303: reading drom (length: 0x75)
[   33.018678] thunderbolt 0000:05:00.0: 303: uid: 0x8086461d6849d310
[   33.018804] thunderbolt 0000:05:00.0:  Port 0: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   33.018805] thunderbolt 0000:05:00.0:   Max hop id (in/out): 7/7
[   33.018805] thunderbolt 0000:05:00.0:   Max counters: 8
[   33.018806] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[   33.019315] thunderbolt 0000:05:00.0:  Port 1: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   33.019316] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   33.019316] thunderbolt 0000:05:00.0:   Max counters: 16
[   33.019317] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800000
[   33.019827] thunderbolt 0000:05:00.0:  Port 2: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   33.019827] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   33.019828] thunderbolt 0000:05:00.0:   Max counters: 16
[   33.019828] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[   33.020341] thunderbolt 0000:05:00.0:  Port 3: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   33.020343] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   33.020343] thunderbolt 0000:05:00.0:   Max counters: 16
[   33.020344] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[   33.020853] thunderbolt 0000:05:00.0:  Port 4: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[   33.020854] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[   33.020855] thunderbolt 0000:05:00.0:   Max counters: 16
[   33.020856] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[   33.020857] thunderbolt 0000:05:00.0: 303:5: disabled by eeprom
[   33.020981] thunderbolt 0000:05:00.0:  Port 6: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100102))
[   33.020982] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[   33.020983] thunderbolt 0000:05:00.0:   Max counters: 2
[   33.020984] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[   33.021109] thunderbolt 0000:05:00.0:  Port 7: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100101))
[   33.021110] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[   33.021111] thunderbolt 0000:05:00.0:   Max counters: 2
[   33.021111] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[   33.021236] thunderbolt 0000:05:00.0:  Port 8: 8086:1578 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0102))
[   33.021237] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[   33.021238] thunderbolt 0000:05:00.0:   Max counters: 2
[   33.021239] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[   33.021240] thunderbolt 0000:05:00.0: 303:9: disabled by eeprom
[   33.021364] thunderbolt 0000:05:00.0:  Port 10: 8086:1578 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0101))
[   33.021365] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[   33.021366] thunderbolt 0000:05:00.0:   Max counters: 2
[   33.021367] thunderbolt 0000:05:00.0:   NFC Credits: 0x1000000
[   33.021368] thunderbolt 0000:05:00.0: 303:b: disabled by eeprom
[   34.904054] usb usb4-port2: Cannot enable. Maybe the USB cable is bad?
[   35.208303] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   35.208308] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   35.208311] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   35.208313] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   35.228542] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   35.228544] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   35.228547] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   35.228549] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   35.352206] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   35.352208] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   35.352210] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   35.352212] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   35.356608] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   35.356610] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   35.356614] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   35.356620] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   35.412530] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   35.412534] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   35.412537] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   35.412539] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   35.520269] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   35.520271] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   35.520274] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   35.520276] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   35.536458] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   35.536460] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   35.536463] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   35.536465] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   38.992083] usb usb4-port2: Cannot enable. Maybe the USB cable is bad?
[   38.992150] usb usb4-port2: attempt power cycle
[   40.620408] dpc 0000:00:1d.0:pcie008: DPC containment event, status:0x1f00 source:0x0000
[   40.640311] pciehp 0000:04:04.0:pcie204: Slot(4): Card present
[   40.640313] pciehp 0000:04:04.0:pcie204: Slot(4): Link Up
[   40.965728] pci 0000:3c:00.0: [8086:1578] type 01 class 0x060400
[   40.965937] pci 0000:3c:00.0: enabling Extended Tags
[   40.966302] pci 0000:3c:00.0: supports D1 D2
[   40.966310] pci 0000:3c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[   40.966808] pci 0000:3c:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   40.967084] pci 0000:3d:01.0: [8086:1578] type 01 class 0x060400
[   40.967243] pci 0000:3d:01.0: enabling Extended Tags
[   40.967562] pci 0000:3d:01.0: supports D1 D2
[   40.967568] pci 0000:3d:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[   40.967944] pci 0000:3d:04.0: [8086:1578] type 01 class 0x060400
[   40.968185] pci 0000:3d:04.0: enabling Extended Tags
[   40.968470] pci 0000:3d:04.0: supports D1 D2
[   40.968475] pci 0000:3d:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[   40.968851] pci 0000:3c:00.0: PCI bridge to [bus 3d-70]
[   40.968876] pci 0000:3c:00.0:   bridge window [io  0x0000-0x0fff]
[   40.968886] pci 0000:3c:00.0:   bridge window [mem 0x00000000-0x000fffff]
[   40.968904] pci 0000:3c:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[   40.968914] pci 0000:3d:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   40.968937] pci 0000:3d:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   40.969165] pci 0000:3d:01.0: PCI bridge to [bus 3e-70]
[   40.969189] pci 0000:3d:01.0:   bridge window [io  0x0000-0x0fff]
[   40.969201] pci 0000:3d:01.0:   bridge window [mem 0x00000000-0x000fffff]
[   40.969220] pci 0000:3d:01.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[   40.969228] pci_bus 0000:3e: busn_res: [bus 3e-70] end is updated to 3e
[   40.969437] pci 0000:3d:04.0: PCI bridge to [bus 3f-70]
[   40.969461] pci 0000:3d:04.0:   bridge window [io  0x0000-0x0fff]
[   40.969475] pci 0000:3d:04.0:   bridge window [mem 0x00000000-0x000fffff]
[   40.969494] pci 0000:3d:04.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[   40.969500] pci_bus 0000:3f: busn_res: [bus 3f-70] end is updated to 70
[   40.969512] pci_bus 0000:3d: busn_res: [bus 3d-70] end is updated to 70
[   40.969569] pci 0000:3d:04.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 3f-70] add_size 200000 add_align 100000
[   40.969574] pci 0000:3d:04.0: bridge window [mem 0x00100000-0x001fffff] to [bus 3f-70] add_size 200000 add_align 100000
[   40.969602] pci 0000:3c:00.0: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 3d-70] add_size 200000 add_align 100000
[   40.969607] pci 0000:3c:00.0: bridge window [mem 0x00100000-0x002fffff] to [bus 3d-70] add_size 200000 add_align 100000
[   40.969637] pci 0000:3c:00.0: BAR 14: assigned [mem 0x70000000-0x86efffff]
[   40.969643] pci 0000:3c:00.0: BAR 15: assigned [mem 0x6000000000-0x6024ffffff 64bit pref]
[   40.969648] pci 0000:3c:00.0: BAR 13: no space for [io  size 0x2000]
[   40.969652] pci 0000:3c:00.0: BAR 13: failed to assign [io  size 0x2000]
[   40.969657] pci 0000:3c:00.0: BAR 13: no space for [io  size 0x2000]
[   40.969660] pci 0000:3c:00.0: BAR 13: failed to assign [io  size 0x2000]
[   40.969669] pci 0000:3d:01.0: BAR 14: assigned [mem 0x70000000-0x700fffff]
[   40.969675] pci 0000:3d:01.0: BAR 15: assigned [mem 0x6000000000-0x60000fffff 64bit pref]
[   40.969679] pci 0000:3d:04.0: BAR 14: assigned [mem 0x70100000-0x86efffff]
[   40.969684] pci 0000:3d:04.0: BAR 15: assigned [mem 0x6000100000-0x6024ffffff 64bit pref]
[   40.969687] pci 0000:3d:01.0: BAR 13: no space for [io  size 0x1000]
[   40.969690] pci 0000:3d:01.0: BAR 13: failed to assign [io  size 0x1000]
[   40.969694] pci 0000:3d:04.0: BAR 13: no space for [io  size 0x1000]
[   40.969697] pci 0000:3d:04.0: BAR 13: failed to assign [io  size 0x1000]
[   40.969702] pci 0000:3d:01.0: BAR 13: no space for [io  size 0x1000]
[   40.969705] pci 0000:3d:01.0: BAR 13: failed to assign [io  size 0x1000]
[   40.969709] pci 0000:3d:04.0: BAR 13: no space for [io  size 0x1000]
[   40.969712] pci 0000:3d:04.0: BAR 13: failed to assign [io  size 0x1000]
[   40.969716] pci 0000:3d:01.0: PCI bridge to [bus 3e]
[   40.969731] pci 0000:3d:01.0:   bridge window [mem 0x70000000-0x700fffff]
[   40.969742] pci 0000:3d:01.0:   bridge window [mem 0x6000000000-0x60000fffff 64bit pref]
[   40.969758] pci 0000:3d:04.0: PCI bridge to [bus 3f-70]
[   40.969772] pci 0000:3d:04.0:   bridge window [mem 0x70100000-0x86efffff]
[   40.969782] pci 0000:3d:04.0:   bridge window [mem 0x6000100000-0x6024ffffff 64bit pref]
[   40.969798] pci 0000:3c:00.0: PCI bridge to [bus 3d-70]
[   40.969811] pci 0000:3c:00.0:   bridge window [mem 0x70000000-0x86efffff]
[   40.969822] pci 0000:3c:00.0:   bridge window [mem 0x6000000000-0x6024ffffff 64bit pref]
[   40.969838] pcieport 0000:04:04.0: PCI bridge to [bus 3c-70]
[   40.969844] pcieport 0000:04:04.0:   bridge window [io  0x5000-0x5fff]
[   40.969853] pcieport 0000:04:04.0:   bridge window [mem 0x70000000-0x86efffff]
[   40.969861] pcieport 0000:04:04.0:   bridge window [mem 0x6000000000-0x6024ffffff 64bit pref]
[   40.969871] PCI: No. 2 try to assign unassigned res
[   40.969877] pcieport 0000:04:04.0: resource 13 [io  0x5000-0x5fff] released
[   40.969880] pcieport 0000:04:04.0: PCI bridge to [bus 3c-70]
[   40.969967] pcieport 0000:04:04.0: bridge window [io  0x1000-0x2fff] to [bus 3c-70] add_size 1000
[   40.969974] pcieport 0000:04:04.0: BAR 13: no space for [io  size 0x3000]
[   40.969978] pcieport 0000:04:04.0: BAR 13: failed to assign [io  size 0x3000]
[   40.969982] pcieport 0000:04:04.0: BAR 13: no space for [io  size 0x2000]
[   40.969985] pcieport 0000:04:04.0: BAR 13: failed to assign [io  size 0x2000]
[   40.969989] pci 0000:3c:00.0: BAR 13: no space for [io  size 0x2000]
[   40.969992] pci 0000:3c:00.0: BAR 13: failed to assign [io  size 0x2000]
[   40.969997] pci 0000:3d:01.0: BAR 13: no space for [io  size 0x1000]
[   40.970000] pci 0000:3d:01.0: BAR 13: failed to assign [io  size 0x1000]
[   40.970003] pci 0000:3d:04.0: BAR 13: no space for [io  size 0x1000]
[   40.970006] pci 0000:3d:04.0: BAR 13: failed to assign [io  size 0x1000]
[   40.970009] pci 0000:3d:01.0: PCI bridge to [bus 3e]
[   40.970024] pci 0000:3d:01.0:   bridge window [mem 0x70000000-0x700fffff]
[   40.970034] pci 0000:3d:01.0:   bridge window [mem 0x6000000000-0x60000fffff 64bit pref]
[   40.970050] pci 0000:3d:04.0: PCI bridge to [bus 3f-70]
[   40.970067] pci 0000:3d:04.0:   bridge window [mem 0x70100000-0x86efffff]
[   40.970077] pci 0000:3d:04.0:   bridge window [mem 0x6000100000-0x6024ffffff 64bit pref]
[   40.970093] pci 0000:3c:00.0: PCI bridge to [bus 3d-70]
[   40.970106] pci 0000:3c:00.0:   bridge window [mem 0x70000000-0x86efffff]
[   40.970116] pci 0000:3c:00.0:   bridge window [mem 0x6000000000-0x6024ffffff 64bit pref]
[   40.970132] pcieport 0000:04:04.0: PCI bridge to [bus 3c-70]
[   40.970142] pcieport 0000:04:04.0:   bridge window [mem 0x70000000-0x86efffff]
[   40.970149] pcieport 0000:04:04.0:   bridge window [mem 0x6000000000-0x6024ffffff 64bit pref]
[   40.970274] pcieport 0000:3c:00.0: enabling device (0000 -> 0002)
[   40.971028] pcieport 0000:3d:01.0: enabling device (0000 -> 0002)
[   40.971639] pcieport 0000:3d:04.0: enabling device (0000 -> 0002)
[   40.972295] pciehp 0000:3d:04.0:pcie204: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[   41.068342] pcieport 0000:3d:04.0: bridge window [io  0x1000-0x0fff] to [bus 3f-70] add_size 1000
[   41.068361] pcieport 0000:3c:00.0: bridge window [io  0x1000-0x0fff] to [bus 3d-70] add_size 1000
[   41.068376] pcieport 0000:04:04.0: bridge window [io  0x1000-0x0fff] to [bus 3c-70] add_size 1000
[   41.068395] pcieport 0000:04:04.0: BAR 13: assigned [io  0x5000-0x5fff]
[   41.068397] pcieport 0000:3c:00.0: BAR 13: assigned [io  0x5000-0x5fff]
[   41.068398] pcieport 0000:3d:04.0: BAR 13: assigned [io  0x5000-0x5fff]
[   41.068399] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   41.068401] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   41.068404] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   41.068406] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   41.136538] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   41.136543] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   41.136550] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   41.136553] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   41.212473] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   41.212477] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   41.212479] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   41.212481] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   41.280961] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   41.280964] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   41.280968] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   41.280970] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   41.281162] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   41.281163] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   41.281171] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   41.281175] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   41.384468] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   41.384470] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   41.384477] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   41.384480] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   41.440284] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   41.440286] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   41.440289] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   41.440291] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   44.570136] dpc 0000:00:1d.0:pcie008: DPC containment event, status:0x1f00 source:0x0000
[   44.628332] pciehp 0000:3d:04.0:pcie204: Slot(4-1): Card present
[   44.628334] pciehp 0000:3d:04.0:pcie204: Slot(4-1): Link Up
[   44.915961] pci 0000:3f:00.0: [8086:1578] type 01 class 0x060400
[   44.916357] pci 0000:3f:00.0: enabling Extended Tags
[   44.916783] pci 0000:3f:00.0: supports D1 D2
[   44.916791] pci 0000:3f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[   44.917372] pci 0000:3f:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   44.917686] pci 0000:40:01.0: [8086:1578] type 01 class 0x060400
[   44.917888] pci 0000:40:01.0: enabling Extended Tags
[   44.918232] pci 0000:40:01.0: supports D1 D2
[   44.918237] pci 0000:40:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[   44.918579] pci 0000:40:04.0: [8086:1578] type 01 class 0x060400
[   44.918774] pci 0000:40:04.0: enabling Extended Tags
[   44.919082] pci 0000:40:04.0: supports D1 D2
[   44.919086] pci 0000:40:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[   44.919471] pci 0000:3f:00.0: PCI bridge to [bus 40-70]
[   44.919502] pci 0000:3f:00.0:   bridge window [io  0x0000-0x0fff]
[   44.919516] pci 0000:3f:00.0:   bridge window [mem 0x00000000-0x000fffff]
[   44.919538] pci 0000:3f:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[   44.919547] pci 0000:40:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   44.919574] pci 0000:40:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[   44.919831] pci 0000:41:00.0: [1b21:1142] type 00 class 0x0c0330
[   44.919944] pci 0000:41:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[   44.920451] pci 0000:41:00.0: PME# supported from D3cold
[   44.920898] pci 0000:40:01.0: PCI bridge to [bus 41-70]
[   44.920923] pci 0000:40:01.0:   bridge window [io  0x0000-0x0fff]
[   44.920935] pci 0000:40:01.0:   bridge window [mem 0x00000000-0x000fffff]
[   44.920957] pci 0000:40:01.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[   44.920964] pci_bus 0000:41: busn_res: [bus 41-70] end is updated to 41
[   44.921166] pci 0000:40:04.0: PCI bridge to [bus 42-70]
[   44.921189] pci 0000:40:04.0:   bridge window [io  0x0000-0x0fff]
[   44.921201] pci 0000:40:04.0:   bridge window [mem 0x00000000-0x000fffff]
[   44.921222] pci 0000:40:04.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[   44.921227] pci_bus 0000:42: busn_res: [bus 42-70] end is updated to 70
[   44.921241] pci_bus 0000:40: busn_res: [bus 40-70] end is updated to 70
[   44.921330] pci 0000:40:04.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 42-70] add_size 200000 add_align 100000
[   44.921331] pci 0000:40:04.0: bridge window [mem 0x00100000-0x001fffff] to [bus 42-70] add_size 200000 add_align 100000
[   44.921355] pci 0000:3f:00.0: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 40-70] add_size 200000 add_align 100000
[   44.921357] pci 0000:3f:00.0: bridge window [mem 0x00100000-0x002fffff] to [bus 40-70] add_size 200000 add_align 100000
[   44.921379] pci 0000:3f:00.0: BAR 14: assigned [mem 0x70100000-0x86efffff]
[   44.921381] pci 0000:3f:00.0: BAR 15: assigned [mem 0x6000100000-0x6024ffffff 64bit pref]
[   44.921382] pci 0000:3f:00.0: BAR 13: no space for [io  size 0x2000]
[   44.921383] pci 0000:3f:00.0: BAR 13: failed to assign [io  size 0x2000]
[   44.921385] pci 0000:3f:00.0: BAR 13: no space for [io  size 0x2000]
[   44.921386] pci 0000:3f:00.0: BAR 13: failed to assign [io  size 0x2000]
[   44.921389] pci 0000:40:01.0: BAR 14: assigned [mem 0x70100000-0x701fffff]
[   44.921391] pci 0000:40:01.0: BAR 15: assigned [mem 0x6000100000-0x60001fffff 64bit pref]
[   44.921392] pci 0000:40:04.0: BAR 14: assigned [mem 0x70200000-0x86efffff]
[   44.921395] pci 0000:40:04.0: BAR 15: assigned [mem 0x6000200000-0x6024ffffff 64bit pref]
[   44.921396] pci 0000:40:01.0: BAR 13: no space for [io  size 0x1000]
[   44.921397] pci 0000:40:01.0: BAR 13: failed to assign [io  size 0x1000]
[   44.921398] pci 0000:40:04.0: BAR 13: no space for [io  size 0x1000]
[   44.921399] pci 0000:40:04.0: BAR 13: failed to assign [io  size 0x1000]
[   44.921401] pci 0000:40:01.0: BAR 13: no space for [io  size 0x1000]
[   44.921402] pci 0000:40:01.0: BAR 13: failed to assign [io  size 0x1000]
[   44.921403] pci 0000:40:04.0: BAR 13: no space for [io  size 0x1000]
[   44.921403] pci 0000:40:04.0: BAR 13: failed to assign [io  size 0x1000]
[   44.921406] pci 0000:41:00.0: BAR 0: assigned [mem 0x70100000-0x70107fff 64bit]
[   44.921441] pci 0000:40:01.0: PCI bridge to [bus 41]
[   44.921454] pci 0000:40:01.0:   bridge window [mem 0x70100000-0x701fffff]
[   44.921463] pci 0000:40:01.0:   bridge window [mem 0x6000100000-0x60001fffff 64bit pref]
[   44.921479] pci 0000:40:04.0: PCI bridge to [bus 42-70]
[   44.921491] pci 0000:40:04.0:   bridge window [mem 0x70200000-0x86efffff]
[   44.921500] pci 0000:40:04.0:   bridge window [mem 0x6000200000-0x6024ffffff 64bit pref]
[   44.921516] pci 0000:3f:00.0: PCI bridge to [bus 40-70]
[   44.921528] pci 0000:3f:00.0:   bridge window [mem 0x70100000-0x86efffff]
[   44.921537] pci 0000:3f:00.0:   bridge window [mem 0x6000100000-0x6024ffffff 64bit pref]
[   44.921552] pcieport 0000:3d:04.0: PCI bridge to [bus 3f-70]
[   44.921556] pcieport 0000:3d:04.0:   bridge window [io  0x5000-0x5fff]
[   44.921565] pcieport 0000:3d:04.0:   bridge window [mem 0x70100000-0x86efffff]
[   44.921571] pcieport 0000:3d:04.0:   bridge window [mem 0x6000100000-0x6024ffffff 64bit pref]
[   44.921582] PCI: No. 2 try to assign unassigned res
[   44.921583] pcieport 0000:3d:04.0: resource 13 [io  0x5000-0x5fff] released
[   44.921584] pcieport 0000:3d:04.0: PCI bridge to [bus 3f-70]
[   44.921679] pcieport 0000:3d:04.0: bridge window [io  0x1000-0x2fff] to [bus 3f-70] add_size 1000
[   44.921681] pcieport 0000:3d:04.0: BAR 13: no space for [io  size 0x3000]
[   44.921682] pcieport 0000:3d:04.0: BAR 13: failed to assign [io  size 0x3000]
[   44.921683] pcieport 0000:3d:04.0: BAR 13: no space for [io  size 0x2000]
[   44.921684] pcieport 0000:3d:04.0: BAR 13: failed to assign [io  size 0x2000]
[   44.921685] pci 0000:3f:00.0: BAR 13: no space for [io  size 0x2000]
[   44.921686] pci 0000:3f:00.0: BAR 13: failed to assign [io  size 0x2000]
[   44.921688] pci 0000:40:01.0: BAR 13: no space for [io  size 0x1000]
[   44.921689] pci 0000:40:01.0: BAR 13: failed to assign [io  size 0x1000]
[   44.921690] pci 0000:40:04.0: BAR 13: no space for [io  size 0x1000]
[   44.921692] pci 0000:40:04.0: BAR 13: failed to assign [io  size 0x1000]
[   44.921693] pci 0000:40:01.0: PCI bridge to [bus 41]
[   44.921707] pci 0000:40:01.0:   bridge window [mem 0x70100000-0x701fffff]
[   44.921716] pci 0000:40:01.0:   bridge window [mem 0x6000100000-0x60001fffff 64bit pref]
[   44.921733] pci 0000:40:04.0: PCI bridge to [bus 42-70]
[   44.921746] pci 0000:40:04.0:   bridge window [mem 0x70200000-0x86efffff]
[   44.921755] pci 0000:40:04.0:   bridge window [mem 0x6000200000-0x6024ffffff 64bit pref]
[   44.921771] pci 0000:3f:00.0: PCI bridge to [bus 40-70]
[   44.921785] pci 0000:3f:00.0:   bridge window [mem 0x70100000-0x86efffff]
[   44.921794] pci 0000:3f:00.0:   bridge window [mem 0x6000100000-0x6024ffffff 64bit pref]
[   44.921811] pcieport 0000:3d:04.0: PCI bridge to [bus 3f-70]
[   44.921821] pcieport 0000:3d:04.0:   bridge window [mem 0x70100000-0x86efffff]
[   44.921827] pcieport 0000:3d:04.0:   bridge window [mem 0x6000100000-0x6024ffffff 64bit pref]
[   44.921914] pcieport 0000:3f:00.0: enabling device (0000 -> 0002)
[   44.922393] pcieport 0000:40:01.0: enabling device (0000 -> 0002)
[   44.922779] pcieport 0000:40:04.0: enabling device (0000 -> 0002)
[   44.923065] pciehp 0000:40:04.0:pcie204: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[   44.923403] pci 0000:41:00.0: enabling device (0000 -> 0002)
[   44.923919] xhci_hcd 0000:41:00.0: xHCI Host Controller
[   44.923926] xhci_hcd 0000:41:00.0: new USB bus registered, assigned bus number 5
[   44.990913] xhci_hcd 0000:41:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410
[   44.991461] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[   44.991462] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   44.991463] usb usb5: Product: xHCI Host Controller
[   44.991464] usb usb5: Manufacturer: Linux 4.15.0-1064-oem xhci-hcd
[   44.991465] usb usb5: SerialNumber: 0000:41:00.0
[   44.991593] hub 5-0:1.0: USB hub found
[   44.991608] hub 5-0:1.0: 2 ports detected
[   44.991750] xhci_hcd 0000:41:00.0: xHCI Host Controller
[   44.991754] xhci_hcd 0000:41:00.0: new USB bus registered, assigned bus number 6
[   44.991757] xhci_hcd 0000:41:00.0: Host supports USB 3.0  SuperSpeed
[   44.992524] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[   44.992536] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[   44.992537] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   44.992538] usb usb6: Product: xHCI Host Controller
[   44.992538] usb usb6: Manufacturer: Linux 4.15.0-1064-oem xhci-hcd
[   44.992539] usb usb6: SerialNumber: 0000:41:00.0
[   44.992694] hub 6-0:1.0: USB hub found
[   44.992709] hub 6-0:1.0: 2 ports detected
[   45.392281] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[   45.633202] usb 5-1: New USB device found, idVendor=0424, idProduct=2807
[   45.633208] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   45.633211] usb 5-1: Product: USB2807 Hub
[   45.633214] usb 5-1: Manufacturer: Microchip
[   45.683582] hub 5-1:1.0: USB hub found
[   45.683720] hub 5-1:1.0: 7 ports detected
[   45.770422] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
[   45.792799] usb 6-1: New USB device found, idVendor=0424, idProduct=5807
[   45.792805] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   45.792809] usb 6-1: Product: USB5807 Hub
[   45.792812] usb 6-1: Manufacturer: Microchip
[   45.843892] hub 6-1:1.0: USB hub found
[   45.844518] hub 6-1:1.0: 7 ports detected
[   46.036273] usb 5-1.4: new low-speed USB device number 3 using xhci_hcd
[   46.191962] usb 5-1.4: New USB device found, idVendor=413c, idProduct=301a
[   46.191965] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   46.191967] usb 5-1.4: Product: Dell MS116 USB Optical Mouse
[   46.191968] usb 5-1.4: Manufacturer: PixArt
[   46.278474] usb 6-1.2: new SuperSpeed USB device number 3 using xhci_hcd
[   46.303658] usb 6-1.2: New USB device found, idVendor=0bda, idProduct=8153
[   46.303664] usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[   46.303669] usb 6-1.2: Product: USB 10/100/1000 LAN
[   46.303672] usb 6-1.2: Manufacturer: Realtek
[   46.303676] usb 6-1.2: SerialNumber: 000001000000
[   46.376271] usb 5-1.5: new high-speed USB device number 4 using xhci_hcd
[   46.435422] usbcore: registered new interface driver r8152
[   46.438530] usbcore: registered new interface driver cdc_ether
[   46.605287] usb 5-1.5: New USB device found, idVendor=0bda, idProduct=4014
[   46.605292] usb 5-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[   46.605295] usb 5-1.5: Product: USB Audio
[   46.605298] usb 5-1.5: Manufacturer: Generic
[   46.605300] usb 5-1.5: SerialNumber: 200901010001
[   46.677772] usb 6-1.2: reset SuperSpeed USB device number 3 using xhci_hcd
[   46.776274] usb 5-1.6: new low-speed USB device number 5 using xhci_hcd
[   46.840950] usb 6-1.2: Dell TB16 Dock, disable RX aggregation
[   46.865069] r8152 6-1.2:1.0 (unnamed net_device) (uninitialized): Using pass-thru MAC addr 98:e7:43:e9:4a:ec
[   46.911969] r8152 6-1.2:1.0 eth0: v1.09.9
[   46.920715] r8152 6-1.2:1.0 enx98e743e94aec: renamed from eth0
[   46.981824] IPv6: ADDRCONF(NETDEV_UP): enx98e743e94aec: link is not ready
[   46.982514] usb 5-1.6: New USB device found, idVendor=413c, idProduct=2113
[   46.982519] usb 5-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[   46.982522] usb 5-1.6: Product: Dell KB216 Wired Keyboard
[   47.001321] IPv6: ADDRCONF(NETDEV_UP): enx98e743e94aec: link is not ready
[   47.667580] usbcore: registered new interface driver usbhid
[   47.667582] usbhid: USB HID core driver
[   47.674797] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3c:00.0/0000:3d:04.0/0000:3f:00.0/0000:40:01.0/0000:41:00.0/usb5/5-1/5-1.4/5-1.4:1.0/0003:413C:301A.0003/input/input27
[   47.675027] hid-generic 0003:413C:301A.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:41:00.0-1.4/input0
[   47.675233] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3c:00.0/0000:3d:04.0/0000:3f:00.0/0000:40:01.0/0000:41:00.0/usb5/5-1/5-1.6/5-1.6:1.0/0003:413C:2113.0004/input/input28
[   47.732903] hid-generic 0003:413C:2113.0004: input,hidraw3: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:41:00.0-1.6/input0
[   47.733539] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3c:00.0/0000:3d:04.0/0000:3f:00.0/0000:40:01.0/0000:41:00.0/usb5/5-1/5-1.6/5-1.6:1.1/0003:413C:2113.0005/input/input29
[   47.792326] hid-generic 0003:413C:2113.0005: input,hidraw4: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:41:00.0-1.6/input1
[   48.612464] usbcore: registered new interface driver snd-usb-audio
[   50.549877] r8152 6-1.2:1.0 enx98e743e94aec: carrier on
[   50.549913] IPv6: ADDRCONF(NETDEV_CHANGE): enx98e743e94aec: link becomes ready
[   59.918377] thunderbolt 0000:05:00.0: stopping RX ring 0
[   59.918391] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[   59.918414] thunderbolt 0000:05:00.0: stopping TX ring 0
[   59.918424] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[   59.918436] thunderbolt 0000:05:00.0: control channel stopped
[   70.212131] dpc 0000:00:1d.0:pcie008: DPC containment event, status:0x1f00 source:0x0000
[   70.252266] thunderbolt 0000:05:00.0: control channel starting...
[   70.252272] thunderbolt 0000:05:00.0: starting TX ring 0
[   70.252283] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[   70.252286] thunderbolt 0000:05:00.0: starting RX ring 0
[   70.252296] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[   73.922206] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[   87.006216] thunderbolt 0000:05:00.0: stopping RX ring 0
[   87.006230] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[   87.006268] thunderbolt 0000:05:00.0: stopping TX ring 0
[   87.006275] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[   87.006284] thunderbolt 0000:05:00.0: control channel stopped
[   98.902144] pciehp 0000:04:04.0:pcie204: Slot(4): Link Down
[   98.902149] pciehp 0000:04:04.0:pcie204: Slot(4): Card not present
[   98.902167] pci_raw_set_power_state: 30 callbacks suppressed
[   98.902171] pcieport 0000:40:04.0: Refused to change power state, currently in D3
[   98.903038] xhci_hcd 0000:41:00.0: remove, state 1
[   98.903056] usb usb6: USB disconnect, device number 1
[   98.903060] usb 6-1: USB disconnect, device number 2
[   98.903063] usb 6-1.2: USB disconnect, device number 3
[   98.903204] xhci_hcd 0000:41:00.0: xHCI host controller not responding, assume dead
[   98.908204] pcieport 0000:3d:01.0: Refused to change power state, currently in D3
[   98.908826] dpc 0000:00:1d.0:pcie008: DPC containment event, status:0x1f00 source:0x0000
[   98.948481] thunderbolt 0000:05:00.0: control channel starting...
[   98.948495] thunderbolt 0000:05:00.0: starting TX ring 0
[   98.948517] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[   98.948527] thunderbolt 0000:05:00.0: starting RX ring 0
[   98.948546] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[   98.968062] xhci_hcd 0000:41:00.0: USB bus 6 deregistered
[   98.968230] xhci_hcd 0000:41:00.0: remove, state 1
[   98.968259] usb usb5: USB disconnect, device number 1
[   98.968270] usb 5-1: USB disconnect, device number 2
[   98.968279] usb 5-1.4: USB disconnect, device number 3
[   99.037688] usb 5-1.5: USB disconnect, device number 4
[   99.039017] usb 5-1.6: USB disconnect, device number 5
[   99.196840] xhci_hcd 0000:41:00.0: Host halt failed, -19
[   99.196843] xhci_hcd 0000:41:00.0: Host not accessible, reset failed.
[   99.197042] xhci_hcd 0000:41:00.0: USB bus 5 deregistered
[   99.198101] pcieport 0000:3d:01.0: Refused to change power state, currently in D3
[   99.198290] pci_bus 0000:3e: busn_res: [bus 3e] is released
[   99.198403] pci_bus 0000:41: busn_res: [bus 41] is released
[   99.198453] pci_bus 0000:42: busn_res: [bus 42-70] is released
[   99.198499] pci_bus 0000:40: busn_res: [bus 40-70] is released
[   99.198572] pci_bus 0000:3f: busn_res: [bus 3f-70] is released
[   99.198619] pci_bus 0000:3d: busn_res: [bus 3d-70] is released
[   99.284757] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   99.284760] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   99.284765] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   99.284773] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   99.295677] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   99.295680] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   99.295685] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   99.295688] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   99.340698] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   99.340701] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   99.340706] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   99.340709] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   99.468308] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   99.468313] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   99.468318] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   99.468320] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   99.476778] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   99.476782] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   99.476788] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   99.476792] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   99.624389] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   99.624393] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   99.624400] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   99.624404] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[   99.644830] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[   99.644834] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[   99.644842] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[   99.644846] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  114.910424] thunderbolt 0000:05:00.0: stopping RX ring 0
[  114.910436] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[  114.910455] thunderbolt 0000:05:00.0: stopping TX ring 0
[  114.910464] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[  114.910474] thunderbolt 0000:05:00.0: control channel stopped
[  155.700651] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  155.700656] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  155.700662] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  155.700667] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  155.720248] thunderbolt 0000:05:00.0: control channel starting...
[  155.720252] thunderbolt 0000:05:00.0: starting TX ring 0
[  155.720261] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[  155.720263] thunderbolt 0000:05:00.0: starting RX ring 0
[  155.720271] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[  156.967814] thunderbolt 0000:05:00.0: current switch config:
[  156.967817] thunderbolt 0000:05:00.0:  Switch: 8086:1578 (Revision: 4, TB Version: 2)
[  156.967818] thunderbolt 0000:05:00.0:   Max Port Number: 11
[  156.967818] thunderbolt 0000:05:00.0:   Config:
[  156.967820] thunderbolt 0000:05:00.0:    Upstream Port Number: 1 Depth: 1 Route String: 0x3 Enabled: 1, PlugEventsDelay: 254ms
[  156.967821] thunderbolt 0000:05:00.0:    unknown1: 0x0 unknown4: 0x0
[  157.024488] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  157.024491] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  157.024495] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  157.024524] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  157.040528] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  157.040531] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  157.040534] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  157.040537] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  157.172450] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  157.172453] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  157.172457] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  157.172460] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  157.219613] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  157.219617] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  157.219624] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  157.219628] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  157.220330] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  157.220334] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  157.220340] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  157.220344] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  157.356551] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  157.356554] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  157.356558] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  157.356564] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  157.356703] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  157.356704] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  157.356707] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  157.356711] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  157.580333] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  157.580340] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  157.580352] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  157.580355] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  157.592419] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  157.592422] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  157.592427] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  157.592429] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  157.724183] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  157.724186] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  157.724188] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  157.724190] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  157.727645] thunderbolt 0000:05:00.0: 3: reading drom (length: 0x6e)
[  158.104628] thunderbolt 0000:05:00.0: 3: drom data crc32 mismatch (expected: 0xaf438340, got: 0xaf4383c0), continuing
[  158.105394] thunderbolt 0000:05:00.0: 3: uid: 0xd45f2f9db08200
[  158.105522] thunderbolt 0000:05:00.0:  Port 0: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.105523] thunderbolt 0000:05:00.0:   Max hop id (in/out): 7/7
[  158.105523] thunderbolt 0000:05:00.0:   Max counters: 8
[  158.105524] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[  158.106033] thunderbolt 0000:05:00.0:  Port 1: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.106034] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.106034] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.106035] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800048
[  158.106545] thunderbolt 0000:05:00.0:  Port 2: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.106546] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.106546] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.106547] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[  158.107057] thunderbolt 0000:05:00.0:  Port 3: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.107057] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.107058] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.107058] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800000
[  158.107594] thunderbolt 0000:05:00.0:  Port 4: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.107594] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.107595] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.107595] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[  158.107596] thunderbolt 0000:05:00.0: 3:5: disabled by eeprom
[  158.107698] thunderbolt 0000:05:00.0:  Port 6: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100102))
[  158.107698] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[  158.107699] thunderbolt 0000:05:00.0:   Max counters: 2
[  158.107699] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[  158.107825] thunderbolt 0000:05:00.0:  Port 7: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100101))
[  158.107826] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[  158.107826] thunderbolt 0000:05:00.0:   Max counters: 2
[  158.107827] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[  158.107827] thunderbolt 0000:05:00.0: 3:8: disabled by eeprom
[  158.107828] thunderbolt 0000:05:00.0: 3:9: disabled by eeprom
[  158.107828] thunderbolt 0000:05:00.0: 3:a: disabled by eeprom
[  158.107829] thunderbolt 0000:05:00.0: 3:b: disabled by eeprom
[  158.110679] thunderbolt 0000:05:00.0: current switch config:
[  158.110682] thunderbolt 0000:05:00.0:  Switch: 8086:1578 (Revision: 4, TB Version: 2)
[  158.110683] thunderbolt 0000:05:00.0:   Max Port Number: 11
[  158.110683] thunderbolt 0000:05:00.0:   Config:
[  158.110684] thunderbolt 0000:05:00.0:    Upstream Port Number: 1 Depth: 2 Route String: 0x303 Enabled: 1, PlugEventsDelay: 254ms
[  158.110685] thunderbolt 0000:05:00.0:    unknown1: 0x0 unknown4: 0x0
[  158.128469] thunderbolt 0000:05:00.0: 303: reading drom (length: 0x75)
[  158.515063] thunderbolt 0000:05:00.0: 303: uid: 0x8086461d6849d310
[  158.515189] thunderbolt 0000:05:00.0:  Port 0: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.515190] thunderbolt 0000:05:00.0:   Max hop id (in/out): 7/7
[  158.515191] thunderbolt 0000:05:00.0:   Max counters: 8
[  158.515191] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[  158.515701] thunderbolt 0000:05:00.0:  Port 1: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.515701] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.515702] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.515702] thunderbolt 0000:05:00.0:   NFC Credits: 0x7800000
[  158.516213] thunderbolt 0000:05:00.0:  Port 2: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.516213] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.516214] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.516214] thunderbolt 0000:05:00.0:   NFC Credits: 0x0
[  158.516724] thunderbolt 0000:05:00.0:  Port 3: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.516725] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.516725] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.516726] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[  158.517236] thunderbolt 0000:05:00.0:  Port 4: 8086:1578 (Revision: 4, TB Version: 1, Type: Port (0x1))
[  158.517237] thunderbolt 0000:05:00.0:   Max hop id (in/out): 15/15
[  158.517237] thunderbolt 0000:05:00.0:   Max counters: 16
[  158.517238] thunderbolt 0000:05:00.0:   NFC Credits: 0x3c00000
[  158.517238] thunderbolt 0000:05:00.0: 303:5: disabled by eeprom
[  158.517364] thunderbolt 0000:05:00.0:  Port 6: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100102))
[  158.517365] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[  158.517365] thunderbolt 0000:05:00.0:   Max counters: 2
[  158.517366] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[  158.517492] thunderbolt 0000:05:00.0:  Port 7: 8086:1578 (Revision: 4, TB Version: 1, Type: PCIe (0x100101))
[  158.517493] thunderbolt 0000:05:00.0:   Max hop id (in/out): 8/8
[  158.517493] thunderbolt 0000:05:00.0:   Max counters: 2
[  158.517494] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[  158.517620] thunderbolt 0000:05:00.0:  Port 8: 8086:1578 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0102))
[  158.517621] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[  158.517621] thunderbolt 0000:05:00.0:   Max counters: 2
[  158.517622] thunderbolt 0000:05:00.0:   NFC Credits: 0x800000
[  158.517622] thunderbolt 0000:05:00.0: 303:9: disabled by eeprom
[  158.517748] thunderbolt 0000:05:00.0:  Port 10: 8086:1578 (Revision: 4, TB Version: 1, Type: DP/HDMI (0xe0101))
[  158.517749] thunderbolt 0000:05:00.0:   Max hop id (in/out): 9/9
[  158.517749] thunderbolt 0000:05:00.0:   Max counters: 2
[  158.517750] thunderbolt 0000:05:00.0:   NFC Credits: 0x1000000
[  158.517750] thunderbolt 0000:05:00.0: 303:b: disabled by eeprom
[  158.572012] dpc 0000:00:1d.0:pcie008: DPC containment event, status:0x1f00 source:0x0000
[  158.592107] pciehp 0000:04:04.0:pcie204: Slot(4): Card present
[  158.592108] pciehp 0000:04:04.0:pcie204: Slot(4): Link Up
[  158.917327] pci 0000:3c:00.0: [8086:1578] type 01 class 0x060400
[  158.917426] pci 0000:3c:00.0: enabling Extended Tags
[  158.917604] pci 0000:3c:00.0: supports D1 D2
[  158.917605] pci 0000:3c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[  158.928022] pci 0000:3c:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[  158.928159] pci 0000:3d:01.0: [8086:1578] type 01 class 0x060400
[  158.928263] pci 0000:3d:01.0: enabling Extended Tags
[  158.928429] pci 0000:3d:01.0: supports D1 D2
[  158.928430] pci 0000:3d:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[  158.928584] pci 0000:3d:04.0: [8086:1578] type 01 class 0x060400
[  158.928687] pci 0000:3d:04.0: enabling Extended Tags
[  158.928843] pci 0000:3d:04.0: supports D1 D2
[  158.928845] pci 0000:3d:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[  158.929033] pci 0000:3c:00.0: PCI bridge to [bus 3d-70]
[  158.929045] pci 0000:3c:00.0:   bridge window [io  0x0000-0x0fff]
[  158.929051] pci 0000:3c:00.0:   bridge window [mem 0x00000000-0x000fffff]
[  158.929061] pci 0000:3c:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[  158.929065] pci 0000:3d:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[  158.929078] pci 0000:3d:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[  158.929175] pci 0000:3d:01.0: PCI bridge to [bus 3e-70]
[  158.929186] pci 0000:3d:01.0:   bridge window [io  0x0000-0x0fff]
[  158.929192] pci 0000:3d:01.0:   bridge window [mem 0x00000000-0x000fffff]
[  158.929203] pci 0000:3d:01.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[  158.929205] pci_bus 0000:3e: busn_res: [bus 3e-70] end is updated to 3e
[  158.929292] pci 0000:3d:04.0: PCI bridge to [bus 3f-70]
[  158.929303] pci 0000:3d:04.0:   bridge window [io  0x0000-0x0fff]
[  158.929309] pci 0000:3d:04.0:   bridge window [mem 0x00000000-0x000fffff]
[  158.929319] pci 0000:3d:04.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[  158.929321] pci_bus 0000:3f: busn_res: [bus 3f-70] end is updated to 70
[  158.929327] pci_bus 0000:3d: busn_res: [bus 3d-70] end is updated to 70
[  158.929365] pci 0000:3d:04.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 3f-70] add_size 200000 add_align 100000
[  158.929366] pci 0000:3d:04.0: bridge window [mem 0x00100000-0x001fffff] to [bus 3f-70] add_size 200000 add_align 100000
[  158.929383] pci 0000:3c:00.0: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 3d-70] add_size 200000 add_align 100000
[  158.929384] pci 0000:3c:00.0: bridge window [mem 0x00100000-0x002fffff] to [bus 3d-70] add_size 200000 add_align 100000
[  158.929397] pci 0000:3c:00.0: BAR 14: assigned [mem 0x70000000-0x86efffff]
[  158.929399] pci 0000:3c:00.0: BAR 15: assigned [mem 0x6000000000-0x6024ffffff 64bit pref]
[  158.929401] pci 0000:3c:00.0: BAR 13: no space for [io  size 0x2000]
[  158.929402] pci 0000:3c:00.0: BAR 13: failed to assign [io  size 0x2000]
[  158.929404] pci 0000:3c:00.0: BAR 13: no space for [io  size 0x2000]
[  158.929405] pci 0000:3c:00.0: BAR 13: failed to assign [io  size 0x2000]
[  158.929408] pci 0000:3d:01.0: BAR 14: assigned [mem 0x70000000-0x700fffff]
[  158.929410] pci 0000:3d:01.0: BAR 15: assigned [mem 0x6000000000-0x60000fffff 64bit pref]
[  158.929411] pci 0000:3d:04.0: BAR 14: assigned [mem 0x70100000-0x86efffff]
[  158.929413] pci 0000:3d:04.0: BAR 15: assigned [mem 0x6000100000-0x6024ffffff 64bit pref]
[  158.929414] pci 0000:3d:01.0: BAR 13: no space for [io  size 0x1000]
[  158.929415] pci 0000:3d:01.0: BAR 13: failed to assign [io  size 0x1000]
[  158.929416] pci 0000:3d:04.0: BAR 13: no space for [io  size 0x1000]
[  158.929417] pci 0000:3d:04.0: BAR 13: failed to assign [io  size 0x1000]
[  158.929419] pci 0000:3d:01.0: BAR 13: no space for [io  size 0x1000]
[  158.929420] pci 0000:3d:01.0: BAR 13: failed to assign [io  size 0x1000]
[  158.929421] pci 0000:3d:04.0: BAR 13: no space for [io  size 0x1000]
[  158.929422] pci 0000:3d:04.0: BAR 13: failed to assign [io  size 0x1000]
[  158.929423] pci 0000:3d:01.0: PCI bridge to [bus 3e]
[  158.929433] pci 0000:3d:01.0:   bridge window [mem 0x70000000-0x700fffff]
[  158.929439] pci 0000:3d:01.0:   bridge window [mem 0x6000000000-0x60000fffff 64bit pref]
[  158.929450] pci 0000:3d:04.0: PCI bridge to [bus 3f-70]
[  158.929458] pci 0000:3d:04.0:   bridge window [mem 0x70100000-0x86efffff]
[  158.929464] pci 0000:3d:04.0:   bridge window [mem 0x6000100000-0x6024ffffff 64bit pref]
[  158.929474] pci 0000:3c:00.0: PCI bridge to [bus 3d-70]
[  158.929483] pci 0000:3c:00.0:   bridge window [mem 0x70000000-0x86efffff]
[  158.929489] pci 0000:3c:00.0:   bridge window [mem 0x6000000000-0x6024ffffff 64bit pref]
[  158.929499] pcieport 0000:04:04.0: PCI bridge to [bus 3c-70]
[  158.929502] pcieport 0000:04:04.0:   bridge window [io  0x5000-0x5fff]
[  158.929506] pcieport 0000:04:04.0:   bridge window [mem 0x70000000-0x86efffff]
[  158.929510] pcieport 0000:04:04.0:   bridge window [mem 0x6000000000-0x6024ffffff 64bit pref]
[  158.929515] PCI: No. 2 try to assign unassigned res
[  158.929517] pcieport 0000:04:04.0: resource 13 [io  0x5000-0x5fff] released
[  158.929518] pcieport 0000:04:04.0: PCI bridge to [bus 3c-70]
[  158.929576] pcieport 0000:04:04.0: bridge window [io  0x1000-0x2fff] to [bus 3c-70] add_size 1000
[  158.929578] pcieport 0000:04:04.0: BAR 13: no space for [io  size 0x3000]
[  158.929579] pcieport 0000:04:04.0: BAR 13: failed to assign [io  size 0x3000]
[  158.929581] pcieport 0000:04:04.0: BAR 13: no space for [io  size 0x2000]
[  158.929582] pcieport 0000:04:04.0: BAR 13: failed to assign [io  size 0x2000]
[  158.929583] pci 0000:3c:00.0: BAR 13: no space for [io  size 0x2000]
[  158.929584] pci 0000:3c:00.0: BAR 13: failed to assign [io  size 0x2000]
[  158.929586] pci 0000:3d:01.0: BAR 13: no space for [io  size 0x1000]
[  158.929587] pci 0000:3d:01.0: BAR 13: failed to assign [io  size 0x1000]
[  158.929588] pci 0000:3d:04.0: BAR 13: no space for [io  size 0x1000]
[  158.929589] pci 0000:3d:04.0: BAR 13: failed to assign [io  size 0x1000]
[  158.929590] pci 0000:3d:01.0: PCI bridge to [bus 3e]
[  158.929599] pci 0000:3d:01.0:   bridge window [mem 0x70000000-0x700fffff]
[  158.929605] pci 0000:3d:01.0:   bridge window [mem 0x6000000000-0x60000fffff 64bit pref]
[  158.929616] pci 0000:3d:04.0: PCI bridge to [bus 3f-70]
[  158.929624] pci 0000:3d:04.0:   bridge window [mem 0x70100000-0x86efffff]
[  158.929630] pci 0000:3d:04.0:   bridge window [mem 0x6000100000-0x6024ffffff 64bit pref]
[  158.929641] pci 0000:3c:00.0: PCI bridge to [bus 3d-70]
[  158.929649] pci 0000:3c:00.0:   bridge window [mem 0x70000000-0x86efffff]
[  158.929655] pci 0000:3c:00.0:   bridge window [mem 0x6000000000-0x6024ffffff 64bit pref]
[  158.929665] pcieport 0000:04:04.0: PCI bridge to [bus 3c-70]
[  158.929670] pcieport 0000:04:04.0:   bridge window [mem 0x70000000-0x86efffff]
[  158.929674] pcieport 0000:04:04.0:   bridge window [mem 0x6000000000-0x6024ffffff 64bit pref]
[  158.929726] pcieport 0000:3c:00.0: enabling device (0000 -> 0002)
[  158.930042] pcieport 0000:3d:01.0: enabling device (0000 -> 0002)
[  158.930310] pcieport 0000:3d:04.0: enabling device (0000 -> 0002)
[  158.930509] pciehp 0000:3d:04.0:pcie204: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[  158.984919] pciehp 0000:3d:04.0:pcie204: Slot(4-1): Card present
[  159.330296] pci 0000:3f:00.0: [8086:1578] type 01 class 0x060400
[  159.330444] pci 0000:3f:00.0: enabling Extended Tags
[  159.330700] pci 0000:3f:00.0: supports D1 D2
[  159.330701] pci 0000:3f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[  159.331012] pci 0000:3f:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[  159.331185] pci 0000:40:01.0: [8086:1578] type 01 class 0x060400
[  159.331345] pci 0000:40:01.0: enabling Extended Tags
[  159.331588] pci 0000:40:01.0: supports D1 D2
[  159.331589] pci 0000:40:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[  159.331801] pci 0000:40:04.0: [8086:1578] type 01 class 0x060400
[  159.331963] pci 0000:40:04.0: enabling Extended Tags
[  159.332224] pci 0000:40:04.0: supports D1 D2
[  159.332225] pci 0000:40:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[  159.332490] pci 0000:3f:00.0: PCI bridge to [bus 40-70]
[  159.332508] pci 0000:3f:00.0:   bridge window [io  0x0000-0x0fff]
[  159.332516] pci 0000:3f:00.0:   bridge window [mem 0x00000000-0x000fffff]
[  159.332532] pci 0000:3f:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[  159.332537] pci 0000:40:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[  159.332557] pci 0000:40:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[  159.332741] pci 0000:41:00.0: [1b21:1142] type 00 class 0x0c0330
[  159.332834] pci 0000:41:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[  159.333193] pci 0000:41:00.0: PME# supported from D3cold
[  159.333433] pci 0000:40:01.0: PCI bridge to [bus 41-70]
[  159.333450] pci 0000:40:01.0:   bridge window [io  0x0000-0x0fff]
[  159.333458] pci 0000:40:01.0:   bridge window [mem 0x00000000-0x000fffff]
[  159.333474] pci 0000:40:01.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[  159.333476] pci_bus 0000:41: busn_res: [bus 41-70] end is updated to 41
[  159.333605] pci 0000:40:04.0: PCI bridge to [bus 42-70]
[  159.333621] pci 0000:40:04.0:   bridge window [io  0x0000-0x0fff]
[  159.333630] pci 0000:40:04.0:   bridge window [mem 0x00000000-0x000fffff]
[  159.333646] pci 0000:40:04.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[  159.333647] pci_bus 0000:42: busn_res: [bus 42-70] end is updated to 70
[  159.333656] pci_bus 0000:40: busn_res: [bus 40-70] end is updated to 70
[  159.333712] pci 0000:40:04.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 42-70] add_size 200000 add_align 100000
[  159.333714] pci 0000:40:04.0: bridge window [mem 0x00100000-0x001fffff] to [bus 42-70] add_size 200000 add_align 100000
[  159.333738] pci 0000:3f:00.0: bridge window [mem 0x00100000-0x002fffff 64bit pref] to [bus 40-70] add_size 200000 add_align 100000
[  159.333740] pci 0000:3f:00.0: bridge window [mem 0x00100000-0x002fffff] to [bus 40-70] add_size 200000 add_align 100000
[  159.333756] pcieport 0000:3d:04.0: bridge window [io  0x1000-0x2fff] to [bus 3f-70] add_size 1000
[  159.333761] pcieport 0000:3d:04.0: BAR 13: no space for [io  size 0x3000]
[  159.333762] pcieport 0000:3d:04.0: BAR 13: failed to assign [io  size 0x3000]
[  159.333763] pcieport 0000:3d:04.0: BAR 13: no space for [io  size 0x2000]
[  159.333764] pcieport 0000:3d:04.0: BAR 13: failed to assign [io  size 0x2000]
[  159.333768] pci 0000:3f:00.0: BAR 14: assigned [mem 0x70100000-0x86efffff]
[  159.333770] pci 0000:3f:00.0: BAR 15: assigned [mem 0x6000100000-0x6024ffffff 64bit pref]
[  159.333771] pci 0000:3f:00.0: BAR 13: no space for [io  size 0x2000]
[  159.333772] pci 0000:3f:00.0: BAR 13: failed to assign [io  size 0x2000]
[  159.333774] pci 0000:3f:00.0: BAR 13: no space for [io  size 0x2000]
[  159.333775] pci 0000:3f:00.0: BAR 13: failed to assign [io  size 0x2000]
[  159.333778] pci 0000:40:01.0: BAR 14: assigned [mem 0x70100000-0x701fffff]
[  159.333780] pci 0000:40:01.0: BAR 15: assigned [mem 0x6000100000-0x60001fffff 64bit pref]
[  159.333781] pci 0000:40:04.0: BAR 14: assigned [mem 0x70200000-0x86efffff]
[  159.333783] pci 0000:40:04.0: BAR 15: assigned [mem 0x6000200000-0x6024ffffff 64bit pref]
[  159.333784] pci 0000:40:01.0: BAR 13: no space for [io  size 0x1000]
[  159.333785] pci 0000:40:01.0: BAR 13: failed to assign [io  size 0x1000]
[  159.333786] pci 0000:40:04.0: BAR 13: no space for [io  size 0x1000]
[  159.333787] pci 0000:40:04.0: BAR 13: failed to assign [io  size 0x1000]
[  159.333789] pci 0000:40:01.0: BAR 13: no space for [io  size 0x1000]
[  159.333790] pci 0000:40:01.0: BAR 13: failed to assign [io  size 0x1000]
[  159.333791] pci 0000:40:04.0: BAR 13: no space for [io  size 0x1000]
[  159.333792] pci 0000:40:04.0: BAR 13: failed to assign [io  size 0x1000]
[  159.333795] pci 0000:41:00.0: BAR 0: assigned [mem 0x70100000-0x70107fff 64bit]
[  159.333830] pci 0000:40:01.0: PCI bridge to [bus 41]
[  159.333843] pci 0000:40:01.0:   bridge window [mem 0x70100000-0x701fffff]
[  159.333852] pci 0000:40:01.0:   bridge window [mem 0x6000100000-0x60001fffff 64bit pref]
[  159.333868] pci 0000:40:04.0: PCI bridge to [bus 42-70]
[  159.333880] pci 0000:40:04.0:   bridge window [mem 0x70200000-0x86efffff]
[  159.333889] pci 0000:40:04.0:   bridge window [mem 0x6000200000-0x6024ffffff 64bit pref]
[  159.333904] pci 0000:3f:00.0: PCI bridge to [bus 40-70]
[  159.333917] pci 0000:3f:00.0:   bridge window [mem 0x70100000-0x86efffff]
[  159.333925] pci 0000:3f:00.0:   bridge window [mem 0x6000100000-0x6024ffffff 64bit pref]
[  159.333941] pcieport 0000:3d:04.0: PCI bridge to [bus 3f-70]
[  159.333949] pcieport 0000:3d:04.0:   bridge window [mem 0x70100000-0x86efffff]
[  159.333955] pcieport 0000:3d:04.0:   bridge window [mem 0x6000100000-0x6024ffffff 64bit pref]
[  159.333966] PCI: No. 2 try to assign unassigned res
[  159.334050] pcieport 0000:3d:04.0: bridge window [io  0x1000-0x2fff] to [bus 3f-70] add_size 1000
[  159.334052] pcieport 0000:3d:04.0: BAR 13: no space for [io  size 0x3000]
[  159.334053] pcieport 0000:3d:04.0: BAR 13: failed to assign [io  size 0x3000]
[  159.334054] pcieport 0000:3d:04.0: BAR 13: no space for [io  size 0x2000]
[  159.334055] pcieport 0000:3d:04.0: BAR 13: failed to assign [io  size 0x2000]
[  159.334056] pci 0000:3f:00.0: BAR 13: no space for [io  size 0x2000]
[  159.334057] pci 0000:3f:00.0: BAR 13: failed to assign [io  size 0x2000]
[  159.334059] pci 0000:40:01.0: BAR 13: no space for [io  size 0x1000]
[  159.334060] pci 0000:40:01.0: BAR 13: failed to assign [io  size 0x1000]
[  159.334061] pci 0000:40:04.0: BAR 13: no space for [io  size 0x1000]
[  159.334061] pci 0000:40:04.0: BAR 13: failed to assign [io  size 0x1000]
[  159.334063] pci 0000:40:01.0: PCI bridge to [bus 41]
[  159.334076] pci 0000:40:01.0:   bridge window [mem 0x70100000-0x701fffff]
[  159.334084] pci 0000:40:01.0:   bridge window [mem 0x6000100000-0x60001fffff 64bit pref]
[  159.334100] pci 0000:40:04.0: PCI bridge to [bus 42-70]
[  159.334113] pci 0000:40:04.0:   bridge window [mem 0x70200000-0x86efffff]
[  159.334121] pci 0000:40:04.0:   bridge window [mem 0x6000200000-0x6024ffffff 64bit pref]
[  159.334137] pci 0000:3f:00.0: PCI bridge to [bus 40-70]
[  159.334149] pci 0000:3f:00.0:   bridge window [mem 0x70100000-0x86efffff]
[  159.334158] pci 0000:3f:00.0:   bridge window [mem 0x6000100000-0x6024ffffff 64bit pref]
[  159.334172] pcieport 0000:3d:04.0: PCI bridge to [bus 3f-70]
[  159.334180] pcieport 0000:3d:04.0:   bridge window [mem 0x70100000-0x86efffff]
[  159.334186] pcieport 0000:3d:04.0:   bridge window [mem 0x6000100000-0x6024ffffff 64bit pref]
[  159.334254] pcieport 0000:3f:00.0: enabling device (0000 -> 0002)
[  159.334629] pcieport 0000:40:01.0: enabling device (0000 -> 0002)
[  159.334974] pcieport 0000:40:04.0: enabling device (0000 -> 0002)
[  159.335218] pciehp 0000:40:04.0:pcie204: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[  159.335505] pci 0000:41:00.0: enabling device (0000 -> 0002)
[  159.335902] xhci_hcd 0000:41:00.0: xHCI Host Controller
[  159.335908] xhci_hcd 0000:41:00.0: new USB bus registered, assigned bus number 5
[  159.402900] xhci_hcd 0000:41:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x0000000010000410
[  159.403446] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[  159.403447] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  159.403448] usb usb5: Product: xHCI Host Controller
[  159.403449] usb usb5: Manufacturer: Linux 4.15.0-1064-oem xhci-hcd
[  159.403449] usb usb5: SerialNumber: 0000:41:00.0
[  159.403613] hub 5-0:1.0: USB hub found
[  159.403628] hub 5-0:1.0: 2 ports detected
[  159.403765] xhci_hcd 0000:41:00.0: xHCI Host Controller
[  159.403768] xhci_hcd 0000:41:00.0: new USB bus registered, assigned bus number 6
[  159.403770] xhci_hcd 0000:41:00.0: Host supports USB 3.0  SuperSpeed
[  159.404551] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[  159.404562] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[  159.404563] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  159.404564] usb usb6: Product: xHCI Host Controller
[  159.404564] usb usb6: Manufacturer: Linux 4.15.0-1064-oem xhci-hcd
[  159.404565] usb usb6: SerialNumber: 0000:41:00.0
[  159.404688] hub 6-0:1.0: USB hub found
[  159.404703] hub 6-0:1.0: 2 ports detected
[  159.804013] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[  160.040819] usb 5-1: New USB device found, idVendor=0424, idProduct=2807
[  160.040820] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  160.040821] usb 5-1: Product: USB2807 Hub
[  160.040822] usb 5-1: Manufacturer: Microchip
[  160.090826] hub 5-1:1.0: USB hub found
[  160.090897] hub 5-1:1.0: 7 ports detected
[  160.177965] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
[  160.200481] usb 6-1: New USB device found, idVendor=0424, idProduct=5807
[  160.200482] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  160.200483] usb 6-1: Product: USB5807 Hub
[  160.200484] usb 6-1: Manufacturer: Microchip
[  160.250526] hub 6-1:1.0: USB hub found
[  160.250983] hub 6-1:1.0: 7 ports detected
[  160.444011] usb 5-1.4: new low-speed USB device number 3 using xhci_hcd
[  160.594812] usb 5-1.4: New USB device found, idVendor=413c, idProduct=301a
[  160.594813] usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  160.594814] usb 5-1.4: Product: Dell MS116 USB Optical Mouse
[  160.594814] usb 5-1.4: Manufacturer: PixArt
[  160.648425] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3c:00.0/0000:3d:04.0/0000:3f:00.0/0000:40:01.0/0000:41:00.0/usb5/5-1/5-1.4/5-1.4:1.0/0003:413C:301A.0006/input/input30
[  160.648599] hid-generic 0003:413C:301A.0006: input,hidraw2: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:41:00.0-1.4/input0
[  160.681976] usb 6-1.2: new SuperSpeed USB device number 3 using xhci_hcd
[  160.706046] usb 6-1.2: New USB device found, idVendor=0bda, idProduct=8153
[  160.706047] usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[  160.706048] usb 6-1.2: Product: USB 10/100/1000 LAN
[  160.706049] usb 6-1.2: Manufacturer: Realtek
[  160.706050] usb 6-1.2: SerialNumber: 000001000000
[  160.756183] pcieport 0000:40:04.0: bridge window [io  0x1000-0x0fff] to [bus 42-70] add_size 1000
[  160.756206] pcieport 0000:3f:00.0: bridge window [io  0x1000-0x0fff] to [bus 40-70] add_size 1000
[  160.756222] pcieport 0000:3d:04.0: bridge window [io  0x1000-0x0fff] to [bus 3f-70] add_size 1000
[  160.756236] pcieport 0000:3c:00.0: bridge window [io  0x1000-0x0fff] to [bus 3d-70] add_size 1000
[  160.756244] pcieport 0000:04:04.0: bridge window [io  0x1000-0x0fff] to [bus 3c-70] add_size 1000
[  160.756257] pcieport 0000:04:04.0: BAR 13: assigned [io  0x5000-0x5fff]
[  160.756259] pcieport 0000:3c:00.0: BAR 13: assigned [io  0x5000-0x5fff]
[  160.756260] pcieport 0000:3d:04.0: BAR 13: assigned [io  0x5000-0x5fff]
[  160.756260] pcieport 0000:3f:00.0: BAR 13: assigned [io  0x5000-0x5fff]
[  160.756261] pcieport 0000:40:04.0: BAR 13: assigned [io  0x5000-0x5fff]
[  160.756262] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  160.756264] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  160.756266] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  160.756268] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  160.778460] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  160.778464] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  160.778467] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  160.778470] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  160.779981] usb 5-1.5: new high-speed USB device number 4 using xhci_hcd
[  160.936526] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  160.936530] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  160.936533] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  160.936535] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  160.936777] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  160.936779] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  160.936781] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  160.936783] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  161.033015] usb 5-1.5: New USB device found, idVendor=0bda, idProduct=4014
[  161.033017] usb 5-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[  161.033018] usb 5-1.5: Product: USB Audio
[  161.033019] usb 5-1.5: Manufacturer: Generic
[  161.033020] usb 5-1.5: SerialNumber: 200901010001
[  161.080612] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  161.080614] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  161.080621] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  161.080624] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  161.087559] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  161.087560] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  161.087569] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  161.087571] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  161.117768] usb 6-1.2: reset SuperSpeed USB device number 3 using xhci_hcd
[  161.224270] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  161.224272] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  161.224274] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  161.224276] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  161.900279] usb 6-1.2: Dell TB16 Dock, disable RX aggregation
[  161.915538] r8152 6-1.2:1.0 (unnamed net_device) (uninitialized): Using pass-thru MAC addr 98:e7:43:e9:4a:ec
[  161.960537] r8152 6-1.2:1.0 eth0: v1.09.9
[  162.029102] r8152 6-1.2:1.0 enx98e743e94aec: renamed from eth0
[  162.068716] IPv6: ADDRCONF(NETDEV_UP): enx98e743e94aec: link is not ready
[  162.089337] IPv6: ADDRCONF(NETDEV_UP): enx98e743e94aec: link is not ready
[  162.192015] usb 5-1.6: new low-speed USB device number 5 using xhci_hcd
[  162.354702] usb 5-1.6: New USB device found, idVendor=413c, idProduct=2113
[  162.354703] usb 5-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[  162.354704] usb 5-1.6: Product: Dell KB216 Wired Keyboard
[  162.448138] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3c:00.0/0000:3d:04.0/0000:3f:00.0/0000:40:01.0/0000:41:00.0/usb5/5-1/5-1.6/5-1.6:1.0/0003:413C:2113.0007/input/input31
[  162.508293] hid-generic 0003:413C:2113.0007: input,hidraw3: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:41:00.0-1.6/input0
[  162.516843] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:1d.0/0000:03:00.0/0000:04:04.0/0000:3c:00.0/0000:3d:04.0/0000:3f:00.0/0000:40:01.0/0000:41:00.0/usb5/5-1/5-1.6/5-1.6:1.1/0003:413C:2113.0008/input/input32
[  162.576247] hid-generic 0003:413C:2113.0008: input,hidraw4: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:41:00.0-1.6/input1
[  165.908706] r8152 6-1.2:1.0 enx98e743e94aec: carrier on
[  165.908717] IPv6: ADDRCONF(NETDEV_CHANGE): enx98e743e94aec: link becomes ready
[  167.084544] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  167.084547] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  167.084550] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  167.084552] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  167.097015] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  167.097018] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  167.097021] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  167.097023] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  167.228351] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  167.228353] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  167.228357] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  167.228359] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  167.232915] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  167.232918] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  167.232924] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  167.232927] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  167.264570] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  167.264573] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  167.264577] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  167.264579] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  167.424389] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  167.424391] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  167.424398] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  167.424401] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  167.425211] pcieport 0000:00:1d.0: PCI bridge to [bus 03-70]
[  167.425213] pcieport 0000:00:1d.0:   bridge window [io  0x4000-0x5fff]
[  167.425222] pcieport 0000:00:1d.0:   bridge window [mem 0x70000000-0x9e0fffff]
[  167.425226] pcieport 0000:00:1d.0:   bridge window [mem 0x6000000000-0x6049ffffff 64bit pref]
[  174.750235] thunderbolt 0000:05:00.0: stopping RX ring 0
[  174.750247] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[  174.750262] thunderbolt 0000:05:00.0: stopping TX ring 0
[  174.750271] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[  174.750281] thunderbolt 0000:05:00.0: control channel stopped
[  220.423023] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[  256.279319] wlp2s0: deauthenticating from 6c:f3:7f:10:93:4a by local choice (Reason: 3=DEAUTH_LEAVING)
[  257.490094] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[  258.465821] PM: suspend entry (s2idle)
[  258.465826] PM: Syncing filesystems ... done.
[  258.475816] Freezing user space processes ... (elapsed 0.170 seconds) done.
[  258.645999] OOM killer disabled.
[  258.646002] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  258.647941] Suspending console(s) (use no_console_suspend to debug)
[  258.899994] psmouse serio1: Failed to disable mouse on isa0060/serio1
[  277.729980] usb usb5: root hub lost power or was reset
[  277.729982] usb usb6: root hub lost power or was reset
[  277.917909] ACPI: button: The lid device is not compliant to SW_LID.
[  278.209880] usb 5-1: reset high-speed USB device number 2 using xhci_hcd
[  278.588432] usb 6-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  279.017868] usb 5-1.6: reset low-speed USB device number 5 using xhci_hcd
[  279.450236] usb 5-1.5: reset high-speed USB device number 4 using xhci_hcd
[  279.559933] [drm] RC6 on
[  279.882296] usb 5-1.4: reset low-speed USB device number 3 using xhci_hcd
[  280.316898] usb 6-1.2: reset SuperSpeed USB device number 3 using xhci_hcd
[  280.483962] r8152 6-1.2:1.0 enx98e743e94aec: Using pass-thru MAC addr 98:e7:43:e9:4a:ec
[  280.564072] thunderbolt 0000:05:00.0: control channel starting...
[  280.564074] thunderbolt 0000:05:00.0: starting TX ring 0
[  280.564080] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[  280.564081] thunderbolt 0000:05:00.0: starting RX ring 0
[  280.564087] thunderbolt 0000:05:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[  281.829650] OOM killer enabled.
[  281.829650] Restarting tasks ... done.
[  281.844084] thermal thermal_zone8: failed to read out thermal zone (-61)
[  281.877895] PM: suspend exit
[  282.083889] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
[  282.649804] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  282.837202] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  282.839464] IPv6: ADDRCONF(NETDEV_UP): enx98e743e94aec: link is not ready
[  282.861386] IPv6: ADDRCONF(NETDEV_UP): enx98e743e94aec: link is not ready
[  282.966498] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[  284.238456] r8152 6-1.2:1.0 enx98e743e94aec: carrier on
[  284.238504] IPv6: ADDRCONF(NETDEV_CHANGE): enx98e743e94aec: link becomes ready
[  286.247873] wlp2s0: authenticate with 6c:f3:7f:10:93:4a
[  286.253217] wlp2s0: send auth to 6c:f3:7f:10:93:4a (try 1/3)
[  286.278842] wlp2s0: authenticated
[  286.279908] wlp2s0: associate with 6c:f3:7f:10:93:4a (try 1/3)
[  286.283047] wlp2s0: RX AssocResp from 6c:f3:7f:10:93:4a (capab=0x401 status=0 aid=1)
[  286.289002] wlp2s0: associated
[  286.293180] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  297.834059] thunderbolt 0000:05:00.0: stopping RX ring 0
[  297.834073] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 12 (0x1001 -> 0x1)
[  297.834104] thunderbolt 0000:05:00.0: stopping TX ring 0
[  297.834115] thunderbolt 0000:05:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
[  297.834128] thunderbolt 0000:05:00.0: control channel stopped

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-22 11:05                   ` Paul Menzel
@ 2019-11-22 11:29                     ` Mika Westerberg
  2019-11-22 11:33                       ` Paul Menzel
  0 siblings, 1 reply; 34+ messages in thread
From: Mika Westerberg @ 2019-11-22 11:29 UTC (permalink / raw)
  To: Paul Menzel
  Cc: Mario Limonciello, Andreas Noever, Michael Jamet,
	Yehezkel Bernat, Christian Kellner, linux-kernel, Anthony Wong,
	Mathias Nyman

On Fri, Nov 22, 2019 at 12:05:13PM +0100, Paul Menzel wrote:
> Dear Mika,
> 
> 
> Thank you so much for looking into this issue.
> 
> 
> On 2019-11-22 11:50, Mika Westerberg wrote:
> > On Wed, Nov 20, 2019 at 12:50:53PM +0200, Mika Westerberg wrote:
> >> On Tue, Nov 19, 2019 at 05:55:43PM +0100, Paul Menzel wrote:
> 
> >>> On 2019-11-04 17:21, Mika Westerberg wrote:
> >>>> On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
> >>>
> >>>>> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
> >>>>>
> >>>>>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
> >>>>>>> Sent: Monday, November 4, 2019 9:45 AM
> >>>>>
> >>>>>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
> >>>>>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
> >>>>>
> >>>>>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
> >>>>>
> >>>>>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
> >>>>>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
> >>>>>>>>>> dock connected, the USB input devices, keyboard and mouse,
> >>>>>>>>>> connected to the TB16 stop working. They work for a few seconds
> >>>>>>>>>> (mouse cursor can be moved), but then stop working. The laptop
> >>>>>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
> >>>>>>>>>> according to `fwupdmgr`.
> >>>>>>>>>
> >>>>>>>>> What are the exact steps to reproduce? Just "echo mem >
> >>>>>>>>> /sys/power/state" and then resume by pressing power button?
> >>>>>
> >>>>> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
> >>>>> display. So more than `echo mem > /sys/power/state` is done. What
> >>>>> distribution do you use?
> >>>>
> >>>> I have buildroot based "distro" so there is no UI running.
> >>>
> >>> Hmm, this is quite different from the “normal” use-case of the these devices.
> >>> That way you won’t hit the bugs of the normal users. ;-)
> >>
> >> Well, I can install some distro to that thing also :) I suppose Debian
> >> 10.2 does have this issue, no?
> >>
> >>>>>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
> >>>>>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
> >>>>>>>>
> >>>>>>>> I may have older/different firmware than you, though.
> >>>>>>>
> >>>>>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
> >>>>>>> on my system :/
> >>>>>
> >>>>> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
> >>>>> Updating to the recent version (I got the logs with) did not fix the issue.
> >>>>
> >>>> I also tried v40 (that was originally on that system) but I was not able
> >>>> to reproduce it.
> >>>>
> >>>> Do you know if the user changed any BIOS settings?
> >>>
> >>> We had to disable the Thunderbolt security settings as otherwise the USB
> >>> devices wouldn’t work at cold boot either.
> >>
> >> That does not sound right at all. There is the preboot ACL that allows
> >> you to use TBT dock aready on boot. Bolt takes care of this.
> >>
> >> Are you talking about USB devices connected to the TB16 dock?
> >>
> >> Also are you connecting the TB16 dock to the Thunderbolt ports (left
> >> side of the system marked with small lightning logo) or to the normal
> >> Type-C ports (right side)?
> >>
> >>> So, I built Linux 5.4-rc8 (`make bindeb-pkg -j8`), but unfortunately the
> >>> error is still there. Sometimes, re-plugging the dock helped, and sometimes
> >>> it did not.
> >>>
> >>> Please find the logs attached. The strange thing is, the Linux kernel detects
> >>> the devices and I do not see any disconnect events. But, `lsusb` does not list
> >>> the keyboard and the mouse. Is that expected.
> >>
> >> I'm bit confused. Can you describe the exact steps what you do (so I can
> >> replicate them).
> > 
> > I managed to reproduce following scenario.
> > 
> > 1. Boot the system up to UI
> > 2. Connect TB16 dock (and see that it gets authorized by bolt)
> > 3. Connect keyboard and mouse to the TB16 dock
> > 4. Both mouse and keyboard are functional
> > 5. Enter s2idle by closing laptop lid
> > 6. Exit s2idle by opening the laptop lid
> > 7. After ~10 seconds or so the mouse or keyboard or both do not work
> >    anymore. They do not respond but they are still "present".
> > 
> > The above does not happen always but from time to time.
> > 
> > Is this the scenario you see as well?
> 
> Yes, it is. Though I’d say it’s only five seconds or so.
> 
> > This is on Ubuntu 19.10 with the 5.3 stock kernel.
> 
> “stock” in upstream’s or Ubuntu’s?

It is Ubuntu's.

> > I can get them work again by unplugging them and plugging back (leaving
> > the TBT16 dock connected). Also if you run lspci when the problem
> > occurs it still shows the dock so PCIe link stays up.
> 
> Re-connecting the USB devices does not help here, but I still suspect it’s
> the same issue.

Yeah, sounds like so. Did you try to connect the device (mouse,
keyboard) to anoter USB port?

> Yesterday, I had my hand on a Dell XPS 13 7390 (10th Intel generation) and
> tried it with the shipped Ubuntu 18.04 LTS. There, the problem was not
> always reproducible, but it still happened. Sometimes, only one of the USB
> device (either keyboard or mouse) stopped working.

I suppose this is also with the TB16 dock connected, correct?

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-22 11:29                     ` Mika Westerberg
@ 2019-11-22 11:33                       ` Paul Menzel
  2019-11-22 11:41                         ` Mika Westerberg
  0 siblings, 1 reply; 34+ messages in thread
From: Paul Menzel @ 2019-11-22 11:33 UTC (permalink / raw)
  To: Mika Westerberg
  Cc: Mario Limonciello, Andreas Noever, Michael Jamet,
	Yehezkel Bernat, Christian Kellner, linux-kernel, Anthony Wong,
	Mathias Nyman

[-- Attachment #1: Type: text/plain, Size: 5807 bytes --]

Dear Mika,


On 2019-11-22 12:29, Mika Westerberg wrote:
> On Fri, Nov 22, 2019 at 12:05:13PM +0100, Paul Menzel wrote:

>> On 2019-11-22 11:50, Mika Westerberg wrote:
>>> On Wed, Nov 20, 2019 at 12:50:53PM +0200, Mika Westerberg wrote:
>>>> On Tue, Nov 19, 2019 at 05:55:43PM +0100, Paul Menzel wrote:
>>
>>>>> On 2019-11-04 17:21, Mika Westerberg wrote:
>>>>>> On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
>>>>>
>>>>>>> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
>>>>>>>
>>>>>>>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
>>>>>>>>> Sent: Monday, November 4, 2019 9:45 AM
>>>>>>>
>>>>>>>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
>>>>>>>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
>>>>>>>
>>>>>>>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
>>>>>>>
>>>>>>>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
>>>>>>>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
>>>>>>>>>>>> dock connected, the USB input devices, keyboard and mouse,
>>>>>>>>>>>> connected to the TB16 stop working. They work for a few seconds
>>>>>>>>>>>> (mouse cursor can be moved), but then stop working. The laptop
>>>>>>>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
>>>>>>>>>>>> according to `fwupdmgr`.
>>>>>>>>>>>
>>>>>>>>>>> What are the exact steps to reproduce? Just "echo mem >
>>>>>>>>>>> /sys/power/state" and then resume by pressing power button?
>>>>>>>
>>>>>>> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
>>>>>>> display. So more than `echo mem > /sys/power/state` is done. What
>>>>>>> distribution do you use?
>>>>>>
>>>>>> I have buildroot based "distro" so there is no UI running.
>>>>>
>>>>> Hmm, this is quite different from the “normal” use-case of the these devices.
>>>>> That way you won’t hit the bugs of the normal users. ;-)
>>>>
>>>> Well, I can install some distro to that thing also :) I suppose Debian
>>>> 10.2 does have this issue, no?
>>>>
>>>>>>>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
>>>>>>>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
>>>>>>>>>>
>>>>>>>>>> I may have older/different firmware than you, though.
>>>>>>>>>
>>>>>>>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
>>>>>>>>> on my system :/
>>>>>>>
>>>>>>> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
>>>>>>> Updating to the recent version (I got the logs with) did not fix the issue.
>>>>>>
>>>>>> I also tried v40 (that was originally on that system) but I was not able
>>>>>> to reproduce it.
>>>>>>
>>>>>> Do you know if the user changed any BIOS settings?
>>>>>
>>>>> We had to disable the Thunderbolt security settings as otherwise the USB
>>>>> devices wouldn’t work at cold boot either.
>>>>
>>>> That does not sound right at all. There is the preboot ACL that allows
>>>> you to use TBT dock aready on boot. Bolt takes care of this.
>>>>
>>>> Are you talking about USB devices connected to the TB16 dock?
>>>>
>>>> Also are you connecting the TB16 dock to the Thunderbolt ports (left
>>>> side of the system marked with small lightning logo) or to the normal
>>>> Type-C ports (right side)?
>>>>
>>>>> So, I built Linux 5.4-rc8 (`make bindeb-pkg -j8`), but unfortunately the
>>>>> error is still there. Sometimes, re-plugging the dock helped, and sometimes
>>>>> it did not.
>>>>>
>>>>> Please find the logs attached. The strange thing is, the Linux kernel detects
>>>>> the devices and I do not see any disconnect events. But, `lsusb` does not list
>>>>> the keyboard and the mouse. Is that expected.
>>>>
>>>> I'm bit confused. Can you describe the exact steps what you do (so I can
>>>> replicate them).
>>>
>>> I managed to reproduce following scenario.
>>>
>>> 1. Boot the system up to UI
>>> 2. Connect TB16 dock (and see that it gets authorized by bolt)
>>> 3. Connect keyboard and mouse to the TB16 dock
>>> 4. Both mouse and keyboard are functional
>>> 5. Enter s2idle by closing laptop lid
>>> 6. Exit s2idle by opening the laptop lid
>>> 7. After ~10 seconds or so the mouse or keyboard or both do not work
>>>    anymore. They do not respond but they are still "present".
>>>
>>> The above does not happen always but from time to time.
>>>
>>> Is this the scenario you see as well?
>>
>> Yes, it is. Though I’d say it’s only five seconds or so.
>>
>>> This is on Ubuntu 19.10 with the 5.3 stock kernel.
>>
>> “stock” in upstream’s or Ubuntu’s?
> 
> It is Ubuntu's.
> 
>>> I can get them work again by unplugging them and plugging back (leaving
>>> the TBT16 dock connected). Also if you run lspci when the problem
>>> occurs it still shows the dock so PCIe link stays up.
>>
>> Re-connecting the USB devices does not help here, but I still suspect it’s
>> the same issue.
> 
> Yeah, sounds like so. Did you try to connect the device (mouse,
> keyboard) to another USB port?

I do not think I did, but I can’t remember. Next week would be the next chance
to test this.

>> Yesterday, I had my hand on a Dell XPS 13 7390 (10th Intel generation) and
>> tried it with the shipped Ubuntu 18.04 LTS. There, the problem was not
>> always reproducible, but it still happened. Sometimes, only one of the USB
>> device (either keyboard or mouse) stopped working.
> 
> I suppose this is also with the TB16 dock connected, correct?

Correct.

Can I ask again, how the USB devices connected to the dock can be listed on
the command line? lsusb needs to be adapted for that or is a different
mechanism needed?


Kind regards,

Paul


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-22 11:33                       ` Paul Menzel
@ 2019-11-22 11:41                         ` Mika Westerberg
  2019-11-25  9:20                           ` Mathias Nyman
  0 siblings, 1 reply; 34+ messages in thread
From: Mika Westerberg @ 2019-11-22 11:41 UTC (permalink / raw)
  To: Paul Menzel
  Cc: Mario Limonciello, Andreas Noever, Michael Jamet,
	Yehezkel Bernat, Christian Kellner, linux-kernel, Anthony Wong,
	Mathias Nyman

On Fri, Nov 22, 2019 at 12:33:44PM +0100, Paul Menzel wrote:
> Dear Mika,
> 
> 
> On 2019-11-22 12:29, Mika Westerberg wrote:
> > On Fri, Nov 22, 2019 at 12:05:13PM +0100, Paul Menzel wrote:
> 
> >> On 2019-11-22 11:50, Mika Westerberg wrote:
> >>> On Wed, Nov 20, 2019 at 12:50:53PM +0200, Mika Westerberg wrote:
> >>>> On Tue, Nov 19, 2019 at 05:55:43PM +0100, Paul Menzel wrote:
> >>
> >>>>> On 2019-11-04 17:21, Mika Westerberg wrote:
> >>>>>> On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
> >>>>>
> >>>>>>> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
> >>>>>>>
> >>>>>>>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
> >>>>>>>>> Sent: Monday, November 4, 2019 9:45 AM
> >>>>>>>
> >>>>>>>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
> >>>>>>>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
> >>>>>>>
> >>>>>>>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
> >>>>>>>
> >>>>>>>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
> >>>>>>>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
> >>>>>>>>>>>> dock connected, the USB input devices, keyboard and mouse,
> >>>>>>>>>>>> connected to the TB16 stop working. They work for a few seconds
> >>>>>>>>>>>> (mouse cursor can be moved), but then stop working. The laptop
> >>>>>>>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
> >>>>>>>>>>>> according to `fwupdmgr`.
> >>>>>>>>>>>
> >>>>>>>>>>> What are the exact steps to reproduce? Just "echo mem >
> >>>>>>>>>>> /sys/power/state" and then resume by pressing power button?
> >>>>>>>
> >>>>>>> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
> >>>>>>> display. So more than `echo mem > /sys/power/state` is done. What
> >>>>>>> distribution do you use?
> >>>>>>
> >>>>>> I have buildroot based "distro" so there is no UI running.
> >>>>>
> >>>>> Hmm, this is quite different from the “normal” use-case of the these devices.
> >>>>> That way you won’t hit the bugs of the normal users. ;-)
> >>>>
> >>>> Well, I can install some distro to that thing also :) I suppose Debian
> >>>> 10.2 does have this issue, no?
> >>>>
> >>>>>>>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
> >>>>>>>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
> >>>>>>>>>>
> >>>>>>>>>> I may have older/different firmware than you, though.
> >>>>>>>>>
> >>>>>>>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
> >>>>>>>>> on my system :/
> >>>>>>>
> >>>>>>> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
> >>>>>>> Updating to the recent version (I got the logs with) did not fix the issue.
> >>>>>>
> >>>>>> I also tried v40 (that was originally on that system) but I was not able
> >>>>>> to reproduce it.
> >>>>>>
> >>>>>> Do you know if the user changed any BIOS settings?
> >>>>>
> >>>>> We had to disable the Thunderbolt security settings as otherwise the USB
> >>>>> devices wouldn’t work at cold boot either.
> >>>>
> >>>> That does not sound right at all. There is the preboot ACL that allows
> >>>> you to use TBT dock aready on boot. Bolt takes care of this.
> >>>>
> >>>> Are you talking about USB devices connected to the TB16 dock?
> >>>>
> >>>> Also are you connecting the TB16 dock to the Thunderbolt ports (left
> >>>> side of the system marked with small lightning logo) or to the normal
> >>>> Type-C ports (right side)?
> >>>>
> >>>>> So, I built Linux 5.4-rc8 (`make bindeb-pkg -j8`), but unfortunately the
> >>>>> error is still there. Sometimes, re-plugging the dock helped, and sometimes
> >>>>> it did not.
> >>>>>
> >>>>> Please find the logs attached. The strange thing is, the Linux kernel detects
> >>>>> the devices and I do not see any disconnect events. But, `lsusb` does not list
> >>>>> the keyboard and the mouse. Is that expected.
> >>>>
> >>>> I'm bit confused. Can you describe the exact steps what you do (so I can
> >>>> replicate them).
> >>>
> >>> I managed to reproduce following scenario.
> >>>
> >>> 1. Boot the system up to UI
> >>> 2. Connect TB16 dock (and see that it gets authorized by bolt)
> >>> 3. Connect keyboard and mouse to the TB16 dock
> >>> 4. Both mouse and keyboard are functional
> >>> 5. Enter s2idle by closing laptop lid
> >>> 6. Exit s2idle by opening the laptop lid
> >>> 7. After ~10 seconds or so the mouse or keyboard or both do not work
> >>>    anymore. They do not respond but they are still "present".
> >>>
> >>> The above does not happen always but from time to time.
> >>>
> >>> Is this the scenario you see as well?
> >>
> >> Yes, it is. Though I’d say it’s only five seconds or so.
> >>
> >>> This is on Ubuntu 19.10 with the 5.3 stock kernel.
> >>
> >> “stock” in upstream’s or Ubuntu’s?
> > 
> > It is Ubuntu's.
> > 
> >>> I can get them work again by unplugging them and plugging back (leaving
> >>> the TBT16 dock connected). Also if you run lspci when the problem
> >>> occurs it still shows the dock so PCIe link stays up.
> >>
> >> Re-connecting the USB devices does not help here, but I still suspect it’s
> >> the same issue.
> > 
> > Yeah, sounds like so. Did you try to connect the device (mouse,
> > keyboard) to another USB port?
> 
> I do not think I did, but I can’t remember. Next week would be the next chance
> to test this.
> 
> >> Yesterday, I had my hand on a Dell XPS 13 7390 (10th Intel generation) and
> >> tried it with the shipped Ubuntu 18.04 LTS. There, the problem was not
> >> always reproducible, but it still happened. Sometimes, only one of the USB
> >> device (either keyboard or mouse) stopped working.
> > 
> > I suppose this is also with the TB16 dock connected, correct?
> 
> Correct.
> 
> Can I ask again, how the USB devices connected to the dock can be listed on
> the command line? lsusb needs to be adapted for that or is a different
> mechanism needed?

The TB16 dock has ASMEDIA xHCI controller, which is PCIe device so you
can see it by running lsusb and looking at the devices under that
controller. I think maybe 'lsusb -t' is helpful.

The xHCI controller itself you can see by running lspci.

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-22 11:41                         ` Mika Westerberg
@ 2019-11-25  9:20                           ` Mathias Nyman
  2019-11-26 11:33                             ` Paul Menzel
  0 siblings, 1 reply; 34+ messages in thread
From: Mathias Nyman @ 2019-11-25  9:20 UTC (permalink / raw)
  To: Mika Westerberg, Paul Menzel
  Cc: Mario Limonciello, Andreas Noever, Michael Jamet,
	Yehezkel Bernat, Christian Kellner, linux-kernel, Anthony Wong

On 22.11.2019 13.41, Mika Westerberg wrote:
> On Fri, Nov 22, 2019 at 12:33:44PM +0100, Paul Menzel wrote:
>> Dear Mika,
>>
>>
>> On 2019-11-22 12:29, Mika Westerberg wrote:
>>> On Fri, Nov 22, 2019 at 12:05:13PM +0100, Paul Menzel wrote:
>>
>>>> On 2019-11-22 11:50, Mika Westerberg wrote:
>>>>> On Wed, Nov 20, 2019 at 12:50:53PM +0200, Mika Westerberg wrote:
>>>>>> On Tue, Nov 19, 2019 at 05:55:43PM +0100, Paul Menzel wrote:
>>>>
>>>>>>> On 2019-11-04 17:21, Mika Westerberg wrote:
>>>>>>>> On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
>>>>>>>
>>>>>>>>> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
>>>>>>>>>
>>>>>>>>>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
>>>>>>>>>>> Sent: Monday, November 4, 2019 9:45 AM
>>>>>>>>>
>>>>>>>>>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
>>>>>>>>>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
>>>>>>>>>
>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
>>>>>>>>>
>>>>>>>>>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
>>>>>>>>>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
>>>>>>>>>>>>>> dock connected, the USB input devices, keyboard and mouse,
>>>>>>>>>>>>>> connected to the TB16 stop working. They work for a few seconds
>>>>>>>>>>>>>> (mouse cursor can be moved), but then stop working. The laptop
>>>>>>>>>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
>>>>>>>>>>>>>> according to `fwupdmgr`.
>>>>>>>>>>>>>
>>>>>>>>>>>>> What are the exact steps to reproduce? Just "echo mem >
>>>>>>>>>>>>> /sys/power/state" and then resume by pressing power button?
>>>>>>>>>
>>>>>>>>> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
>>>>>>>>> display. So more than `echo mem > /sys/power/state` is done. What
>>>>>>>>> distribution do you use?
>>>>>>>>
>>>>>>>> I have buildroot based "distro" so there is no UI running.
>>>>>>>
>>>>>>> Hmm, this is quite different from the “normal” use-case of the these devices.
>>>>>>> That way you won’t hit the bugs of the normal users. ;-)
>>>>>>
>>>>>> Well, I can install some distro to that thing also :) I suppose Debian
>>>>>> 10.2 does have this issue, no?
>>>>>>
>>>>>>>>>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
>>>>>>>>>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
>>>>>>>>>>>>
>>>>>>>>>>>> I may have older/different firmware than you, though.
>>>>>>>>>>>
>>>>>>>>>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
>>>>>>>>>>> on my system :/
>>>>>>>>>
>>>>>>>>> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
>>>>>>>>> Updating to the recent version (I got the logs with) did not fix the issue.
>>>>>>>>
>>>>>>>> I also tried v40 (that was originally on that system) but I was not able
>>>>>>>> to reproduce it.
>>>>>>>>
>>>>>>>> Do you know if the user changed any BIOS settings?
>>>>>>>
>>>>>>> We had to disable the Thunderbolt security settings as otherwise the USB
>>>>>>> devices wouldn’t work at cold boot either.
>>>>>>
>>>>>> That does not sound right at all. There is the preboot ACL that allows
>>>>>> you to use TBT dock aready on boot. Bolt takes care of this.
>>>>>>
>>>>>> Are you talking about USB devices connected to the TB16 dock?
>>>>>>
>>>>>> Also are you connecting the TB16 dock to the Thunderbolt ports (left
>>>>>> side of the system marked with small lightning logo) or to the normal
>>>>>> Type-C ports (right side)?
>>>>>>
>>>>>>> So, I built Linux 5.4-rc8 (`make bindeb-pkg -j8`), but unfortunately the
>>>>>>> error is still there. Sometimes, re-plugging the dock helped, and sometimes
>>>>>>> it did not.
>>>>>>>
>>>>>>> Please find the logs attached. The strange thing is, the Linux kernel detects
>>>>>>> the devices and I do not see any disconnect events. But, `lsusb` does not list
>>>>>>> the keyboard and the mouse. Is that expected.
>>>>>>
>>>>>> I'm bit confused. Can you describe the exact steps what you do (so I can
>>>>>> replicate them).
>>>>>
>>>>> I managed to reproduce following scenario.
>>>>>
>>>>> 1. Boot the system up to UI
>>>>> 2. Connect TB16 dock (and see that it gets authorized by bolt)
>>>>> 3. Connect keyboard and mouse to the TB16 dock
>>>>> 4. Both mouse and keyboard are functional
>>>>> 5. Enter s2idle by closing laptop lid
>>>>> 6. Exit s2idle by opening the laptop lid
>>>>> 7. After ~10 seconds or so the mouse or keyboard or both do not work
>>>>>     anymore. They do not respond but they are still "present".
>>>>>
>>>>> The above does not happen always but from time to time.
>>>>>
>>>>> Is this the scenario you see as well?
>>>>
>>>> Yes, it is. Though I’d say it’s only five seconds or so.
>>>>
>>>>> This is on Ubuntu 19.10 with the 5.3 stock kernel.
>>>>
>>>> “stock” in upstream’s or Ubuntu’s?
>>>
>>> It is Ubuntu's.
>>>
>>>>> I can get them work again by unplugging them and plugging back (leaving
>>>>> the TBT16 dock connected). Also if you run lspci when the problem
>>>>> occurs it still shows the dock so PCIe link stays up.
>>>>
>>>> Re-connecting the USB devices does not help here, but I still suspect it’s
>>>> the same issue.
>>>
>>> Yeah, sounds like so. Did you try to connect the device (mouse,
>>> keyboard) to another USB port?
>>
>> I do not think I did, but I can’t remember. Next week would be the next chance
>> to test this.
>>
>>>> Yesterday, I had my hand on a Dell XPS 13 7390 (10th Intel generation) and
>>>> tried it with the shipped Ubuntu 18.04 LTS. There, the problem was not
>>>> always reproducible, but it still happened. Sometimes, only one of the USB
>>>> device (either keyboard or mouse) stopped working.
>>>
>>> I suppose this is also with the TB16 dock connected, correct?
>>
>> Correct.
>>
>> Can I ask again, how the USB devices connected to the dock can be listed on
>> the command line? lsusb needs to be adapted for that or is a different
>> mechanism needed?
> 
> The TB16 dock has ASMEDIA xHCI controller, which is PCIe device so you
> can see it by running lsusb and looking at the devices under that
> controller. I think maybe 'lsusb -t' is helpful.
> 
> The xHCI controller itself you can see by running lspci.
> 

I got traces from the ASMedia xHC controller in the TB16 dock.
There are issues with split transactions between the ASMedia host and the 7 port
High speed hub built in to the dock.

host reports a split transaction error for mouse or keyboard full-speed/low-speed
interrupt transactions. Endpoint doesn't recover after resetting it.

Split transaction allows full- and low-speed devices to be attached to high-speed
hubs, and are used only between the host and the HS hub. A transaction translator (TT)
in the HS hub will translate the high-speed split transactions on its upstream port to
low/full speed transactions on the downstream port.

I'll see if there are any xHC parameters driver is setting that trigger these
split transaction errors to trigger more easy.

-Mathias

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-25  9:20                           ` Mathias Nyman
@ 2019-11-26 11:33                             ` Paul Menzel
  2019-11-26 12:44                               ` Mathias Nyman
  0 siblings, 1 reply; 34+ messages in thread
From: Paul Menzel @ 2019-11-26 11:33 UTC (permalink / raw)
  To: Mathias Nyman, Mika Westerberg
  Cc: Mario Limonciello, Andreas Noever, Michael Jamet,
	Yehezkel Bernat, Christian Kellner, linux-kernel, Anthony Wong

[-- Attachment #1: Type: text/plain, Size: 7644 bytes --]

Dear Mathias,


On 2019-11-25 10:20, Mathias Nyman wrote:
> On 22.11.2019 13.41, Mika Westerberg wrote:
>> On Fri, Nov 22, 2019 at 12:33:44PM +0100, Paul Menzel wrote:

>>> On 2019-11-22 12:29, Mika Westerberg wrote:
>>>> On Fri, Nov 22, 2019 at 12:05:13PM +0100, Paul Menzel wrote:
>>>
>>>>> On 2019-11-22 11:50, Mika Westerberg wrote:
>>>>>> On Wed, Nov 20, 2019 at 12:50:53PM +0200, Mika Westerberg wrote:
>>>>>>> On Tue, Nov 19, 2019 at 05:55:43PM +0100, Paul Menzel wrote:
>>>>>
>>>>>>>> On 2019-11-04 17:21, Mika Westerberg wrote:
>>>>>>>>> On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
>>>>>>>>
>>>>>>>>>> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
>>>>>>>>>>
>>>>>>>>>>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
>>>>>>>>>>>> Sent: Monday, November 4, 2019 9:45 AM
>>>>>>>>>>
>>>>>>>>>>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
>>>>>>>>>>
>>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
>>>>>>>>>>
>>>>>>>>>>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
>>>>>>>>>>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
>>>>>>>>>>>>>>> dock connected, the USB input devices, keyboard and mouse,
>>>>>>>>>>>>>>> connected to the TB16 stop working. They work for a few seconds
>>>>>>>>>>>>>>> (mouse cursor can be moved), but then stop working. The laptop
>>>>>>>>>>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
>>>>>>>>>>>>>>> according to `fwupdmgr`.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> What are the exact steps to reproduce? Just "echo mem >
>>>>>>>>>>>>>> /sys/power/state" and then resume by pressing power button?
>>>>>>>>>>
>>>>>>>>>> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
>>>>>>>>>> display. So more than `echo mem > /sys/power/state` is done. What
>>>>>>>>>> distribution do you use?
>>>>>>>>>
>>>>>>>>> I have buildroot based "distro" so there is no UI running.
>>>>>>>>
>>>>>>>> Hmm, this is quite different from the “normal” use-case of the these devices.
>>>>>>>> That way you won’t hit the bugs of the normal users. ;-)
>>>>>>>
>>>>>>> Well, I can install some distro to that thing also :) I suppose Debian
>>>>>>> 10.2 does have this issue, no?
>>>>>>>
>>>>>>>>>>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
>>>>>>>>>>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
>>>>>>>>>>>>>
>>>>>>>>>>>>> I may have older/different firmware than you, though.
>>>>>>>>>>>>
>>>>>>>>>>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
>>>>>>>>>>>> on my system :/
>>>>>>>>>>
>>>>>>>>>> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
>>>>>>>>>> Updating to the recent version (I got the logs with) did not fix the issue.
>>>>>>>>>
>>>>>>>>> I also tried v40 (that was originally on that system) but I was not able
>>>>>>>>> to reproduce it.
>>>>>>>>>
>>>>>>>>> Do you know if the user changed any BIOS settings?
>>>>>>>>
>>>>>>>> We had to disable the Thunderbolt security settings as otherwise the USB
>>>>>>>> devices wouldn’t work at cold boot either.
>>>>>>>
>>>>>>> That does not sound right at all. There is the preboot ACL that allows
>>>>>>> you to use TBT dock aready on boot. Bolt takes care of this.
>>>>>>>
>>>>>>> Are you talking about USB devices connected to the TB16 dock?
>>>>>>>
>>>>>>> Also are you connecting the TB16 dock to the Thunderbolt ports (left
>>>>>>> side of the system marked with small lightning logo) or to the normal
>>>>>>> Type-C ports (right side)?
>>>>>>>
>>>>>>>> So, I built Linux 5.4-rc8 (`make bindeb-pkg -j8`), but unfortunately the
>>>>>>>> error is still there. Sometimes, re-plugging the dock helped, and sometimes
>>>>>>>> it did not.
>>>>>>>>
>>>>>>>> Please find the logs attached. The strange thing is, the Linux kernel detects
>>>>>>>> the devices and I do not see any disconnect events. But, `lsusb` does not list
>>>>>>>> the keyboard and the mouse. Is that expected.
>>>>>>>
>>>>>>> I'm bit confused. Can you describe the exact steps what you do (so I can
>>>>>>> replicate them).
>>>>>>
>>>>>> I managed to reproduce following scenario.
>>>>>>
>>>>>> 1. Boot the system up to UI
>>>>>> 2. Connect TB16 dock (and see that it gets authorized by bolt)
>>>>>> 3. Connect keyboard and mouse to the TB16 dock
>>>>>> 4. Both mouse and keyboard are functional
>>>>>> 5. Enter s2idle by closing laptop lid
>>>>>> 6. Exit s2idle by opening the laptop lid
>>>>>> 7. After ~10 seconds or so the mouse or keyboard or both do not work
>>>>>>     anymore. They do not respond but they are still "present".
>>>>>>
>>>>>> The above does not happen always but from time to time.
>>>>>>
>>>>>> Is this the scenario you see as well?
>>>>>
>>>>> Yes, it is. Though I’d say it’s only five seconds or so.
>>>>>
>>>>>> This is on Ubuntu 19.10 with the 5.3 stock kernel.
>>>>>
>>>>> “stock” in upstream’s or Ubuntu’s?
>>>>
>>>> It is Ubuntu's.
>>>>
>>>>>> I can get them work again by unplugging them and plugging back (leaving
>>>>>> the TBT16 dock connected). Also if you run lspci when the problem
>>>>>> occurs it still shows the dock so PCIe link stays up.
>>>>>
>>>>> Re-connecting the USB devices does not help here, but I still suspect it’s
>>>>> the same issue.
>>>>
>>>> Yeah, sounds like so. Did you try to connect the device (mouse,
>>>> keyboard) to another USB port?
>>>
>>> I do not think I did, but I can’t remember. Next week would be the next chance
>>> to test this.
>>>
>>>>> Yesterday, I had my hand on a Dell XPS 13 7390 (10th Intel generation) and
>>>>> tried it with the shipped Ubuntu 18.04 LTS. There, the problem was not
>>>>> always reproducible, but it still happened. Sometimes, only one of the USB
>>>>> device (either keyboard or mouse) stopped working.
>>>>
>>>> I suppose this is also with the TB16 dock connected, correct?
>>>
>>> Correct.
>>>
>>> Can I ask again, how the USB devices connected to the dock can be listed on
>>> the command line? lsusb needs to be adapted for that or is a different
>>> mechanism needed?
>>
>> The TB16 dock has ASMEDIA xHCI controller, which is PCIe device so you
>> can see it by running lsusb and looking at the devices under that
>> controller. I think maybe 'lsusb -t' is helpful.
>>
>> The xHCI controller itself you can see by running lspci.
> 
> I got traces from the ASMedia xHC controller in the TB16 dock.

Nice. Thank you for looking into that. How can these traces be captured?

> There are issues with split transactions between the ASMedia host and the 7 port
> High speed hub built in to the dock.
> 
> host reports a split transaction error for mouse or keyboard full-speed/low-speed
> interrupt transactions. Endpoint doesn't recover after resetting it.
> 
> Split transaction allows full- and low-speed devices to be attached to high-speed
> hubs, and are used only between the host and the HS hub. A transaction translator (TT)
> in the HS hub will translate the high-speed split transactions on its upstream port to
> low/full speed transactions on the downstream port.
> 
> I'll see if there are any xHC parameters driver is setting that trigger these
> split transaction errors to trigger more easy.

I always wonder how Microsoft Windows driver do it.

Mario, should I contact the Dell support regarding this issue?


Kind regards,

Paul


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-26 11:33                             ` Paul Menzel
@ 2019-11-26 12:44                               ` Mathias Nyman
  2019-12-20 14:25                                 ` Paul Menzel
  0 siblings, 1 reply; 34+ messages in thread
From: Mathias Nyman @ 2019-11-26 12:44 UTC (permalink / raw)
  To: Paul Menzel, Mika Westerberg
  Cc: Mario Limonciello, Andreas Noever, Michael Jamet,
	Yehezkel Bernat, Christian Kellner, linux-kernel, Anthony Wong

On 26.11.2019 13.33, Paul Menzel wrote:
> Dear Mathias,
> 
> 
> On 2019-11-25 10:20, Mathias Nyman wrote:
>> On 22.11.2019 13.41, Mika Westerberg wrote:
>>> On Fri, Nov 22, 2019 at 12:33:44PM +0100, Paul Menzel wrote:
> 
>>>> On 2019-11-22 12:29, Mika Westerberg wrote:
>>>>> On Fri, Nov 22, 2019 at 12:05:13PM +0100, Paul Menzel wrote:
>>>>
>>>>>> On 2019-11-22 11:50, Mika Westerberg wrote:
>>>>>>> On Wed, Nov 20, 2019 at 12:50:53PM +0200, Mika Westerberg wrote:
>>>>>>>> On Tue, Nov 19, 2019 at 05:55:43PM +0100, Paul Menzel wrote:
>>>>>>
>>>>>>>>> On 2019-11-04 17:21, Mika Westerberg wrote:
>>>>>>>>>> On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
>>>>>>>>>
>>>>>>>>>>> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
>>>>>>>>>>>
>>>>>>>>>>>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
>>>>>>>>>>>>> Sent: Monday, November 4, 2019 9:45 AM
>>>>>>>>>>>
>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
>>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
>>>>>>>>>>>
>>>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
>>>>>>>>>>>
>>>>>>>>>>>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
>>>>>>>>>>>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
>>>>>>>>>>>>>>>> dock connected, the USB input devices, keyboard and mouse,
>>>>>>>>>>>>>>>> connected to the TB16 stop working. They work for a few seconds
>>>>>>>>>>>>>>>> (mouse cursor can be moved), but then stop working. The laptop
>>>>>>>>>>>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
>>>>>>>>>>>>>>>> according to `fwupdmgr`.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> What are the exact steps to reproduce? Just "echo mem >
>>>>>>>>>>>>>>> /sys/power/state" and then resume by pressing power button?
>>>>>>>>>>>
>>>>>>>>>>> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
>>>>>>>>>>> display. So more than `echo mem > /sys/power/state` is done. What
>>>>>>>>>>> distribution do you use?
>>>>>>>>>>
>>>>>>>>>> I have buildroot based "distro" so there is no UI running.
>>>>>>>>>
>>>>>>>>> Hmm, this is quite different from the “normal” use-case of the these devices.
>>>>>>>>> That way you won’t hit the bugs of the normal users. ;-)
>>>>>>>>
>>>>>>>> Well, I can install some distro to that thing also :) I suppose Debian
>>>>>>>> 10.2 does have this issue, no?
>>>>>>>>
>>>>>>>>>>>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
>>>>>>>>>>>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I may have older/different firmware than you, though.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
>>>>>>>>>>>>> on my system :/
>>>>>>>>>>>
>>>>>>>>>>> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
>>>>>>>>>>> Updating to the recent version (I got the logs with) did not fix the issue.
>>>>>>>>>>
>>>>>>>>>> I also tried v40 (that was originally on that system) but I was not able
>>>>>>>>>> to reproduce it.
>>>>>>>>>>
>>>>>>>>>> Do you know if the user changed any BIOS settings?
>>>>>>>>>
>>>>>>>>> We had to disable the Thunderbolt security settings as otherwise the USB
>>>>>>>>> devices wouldn’t work at cold boot either.
>>>>>>>>
>>>>>>>> That does not sound right at all. There is the preboot ACL that allows
>>>>>>>> you to use TBT dock aready on boot. Bolt takes care of this.
>>>>>>>>
>>>>>>>> Are you talking about USB devices connected to the TB16 dock?
>>>>>>>>
>>>>>>>> Also are you connecting the TB16 dock to the Thunderbolt ports (left
>>>>>>>> side of the system marked with small lightning logo) or to the normal
>>>>>>>> Type-C ports (right side)?
>>>>>>>>
>>>>>>>>> So, I built Linux 5.4-rc8 (`make bindeb-pkg -j8`), but unfortunately the
>>>>>>>>> error is still there. Sometimes, re-plugging the dock helped, and sometimes
>>>>>>>>> it did not.
>>>>>>>>>
>>>>>>>>> Please find the logs attached. The strange thing is, the Linux kernel detects
>>>>>>>>> the devices and I do not see any disconnect events. But, `lsusb` does not list
>>>>>>>>> the keyboard and the mouse. Is that expected.
>>>>>>>>
>>>>>>>> I'm bit confused. Can you describe the exact steps what you do (so I can
>>>>>>>> replicate them).
>>>>>>>
>>>>>>> I managed to reproduce following scenario.
>>>>>>>
>>>>>>> 1. Boot the system up to UI
>>>>>>> 2. Connect TB16 dock (and see that it gets authorized by bolt)
>>>>>>> 3. Connect keyboard and mouse to the TB16 dock
>>>>>>> 4. Both mouse and keyboard are functional
>>>>>>> 5. Enter s2idle by closing laptop lid
>>>>>>> 6. Exit s2idle by opening the laptop lid
>>>>>>> 7. After ~10 seconds or so the mouse or keyboard or both do not work
>>>>>>>      anymore. They do not respond but they are still "present".
>>>>>>>
>>>>>>> The above does not happen always but from time to time.
>>>>>>>
>>>>>>> Is this the scenario you see as well?
>>>>>>
>>>>>> Yes, it is. Though I’d say it’s only five seconds or so.
>>>>>>
>>>>>>> This is on Ubuntu 19.10 with the 5.3 stock kernel.
>>>>>>
>>>>>> “stock” in upstream’s or Ubuntu’s?
>>>>>
>>>>> It is Ubuntu's.
>>>>>
>>>>>>> I can get them work again by unplugging them and plugging back (leaving
>>>>>>> the TBT16 dock connected). Also if you run lspci when the problem
>>>>>>> occurs it still shows the dock so PCIe link stays up.
>>>>>>
>>>>>> Re-connecting the USB devices does not help here, but I still suspect it’s
>>>>>> the same issue.
>>>>>
>>>>> Yeah, sounds like so. Did you try to connect the device (mouse,
>>>>> keyboard) to another USB port?
>>>>
>>>> I do not think I did, but I can’t remember. Next week would be the next chance
>>>> to test this.
>>>>
>>>>>> Yesterday, I had my hand on a Dell XPS 13 7390 (10th Intel generation) and
>>>>>> tried it with the shipped Ubuntu 18.04 LTS. There, the problem was not
>>>>>> always reproducible, but it still happened. Sometimes, only one of the USB
>>>>>> device (either keyboard or mouse) stopped working.
>>>>>
>>>>> I suppose this is also with the TB16 dock connected, correct?
>>>>
>>>> Correct.
>>>>
>>>> Can I ask again, how the USB devices connected to the dock can be listed on
>>>> the command line? lsusb needs to be adapted for that or is a different
>>>> mechanism needed?
>>>
>>> The TB16 dock has ASMEDIA xHCI controller, which is PCIe device so you
>>> can see it by running lsusb and looking at the devices under that
>>> controller. I think maybe 'lsusb -t' is helpful.
>>>
>>> The xHCI controller itself you can see by running lspci.
>>
>> I got traces from the ASMedia xHC controller in the TB16 dock.
> 
> Nice. Thank you for looking into that. How can these traces be captured?

The Linux tracepoints added to the xhci driver can be enabled by:

mount -t debugfs none /sys/kernel/debug
echo 81920 > /sys/kernel/debug/tracing/buffer_size_kb
echo 1 > /sys/kernel/debug/tracing/events/xhci-hcd/enable
< Trigger the issue >

Copy traces found in /sys/kernel/debug/tracing/trace

Trace file grows fast.

-Mathias

> 
>> There are issues with split transactions between the ASMedia host and the 7 port
>> High speed hub built in to the dock.
>>
>> host reports a split transaction error for mouse or keyboard full-speed/low-speed
>> interrupt transactions. Endpoint doesn't recover after resetting it.
>>
>> Split transaction allows full- and low-speed devices to be attached to high-speed
>> hubs, and are used only between the host and the HS hub. A transaction translator (TT)
>> in the HS hub will translate the high-speed split transactions on its upstream port to
>> low/full speed transactions on the downstream port.
>>
>> I'll see if there are any xHC parameters driver is setting that trigger these
>> split transaction errors to trigger more easy.
> 
> I always wonder how Microsoft Windows driver do it.
> 
> Mario, should I contact the Dell support regarding this issue?
> 
> 
> Kind regards,
> 
> Paul
> 


^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-11-26 12:44                               ` Mathias Nyman
@ 2019-12-20 14:25                                 ` Paul Menzel
  2019-12-23  9:39                                   ` Mathias Nyman
  0 siblings, 1 reply; 34+ messages in thread
From: Paul Menzel @ 2019-12-20 14:25 UTC (permalink / raw)
  To: Mathias Nyman, Mika Westerberg
  Cc: Mario Limonciello, Andreas Noever, Michael Jamet,
	Yehezkel Bernat, Christian Kellner, linux-kernel, Anthony Wong

[-- Attachment #1: Type: text/plain, Size: 8489 bytes --]

Dear Mathias,


On 2019-11-26 13:44, Mathias Nyman wrote:
> On 26.11.2019 13.33, Paul Menzel wrote:

>> On 2019-11-25 10:20, Mathias Nyman wrote:
>>> On 22.11.2019 13.41, Mika Westerberg wrote:
>>>> On Fri, Nov 22, 2019 at 12:33:44PM +0100, Paul Menzel wrote:
>>
>>>>> On 2019-11-22 12:29, Mika Westerberg wrote:
>>>>>> On Fri, Nov 22, 2019 at 12:05:13PM +0100, Paul Menzel wrote:
>>>>>
>>>>>>> On 2019-11-22 11:50, Mika Westerberg wrote:
>>>>>>>> On Wed, Nov 20, 2019 at 12:50:53PM +0200, Mika Westerberg wrote:
>>>>>>>>> On Tue, Nov 19, 2019 at 05:55:43PM +0100, Paul Menzel wrote:
>>>>>>>
>>>>>>>>>> On 2019-11-04 17:21, Mika Westerberg wrote:
>>>>>>>>>>> On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
>>>>>>>>>>
>>>>>>>>>>>> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
>>>>>>>>>>>>>> Sent: Monday, November 4, 2019 9:45 AM
>>>>>>>>>>>>
>>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
>>>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
>>>>>>>>>>>>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
>>>>>>>>>>>>>>>>> dock connected, the USB input devices, keyboard and mouse,
>>>>>>>>>>>>>>>>> connected to the TB16 stop working. They work for a few seconds
>>>>>>>>>>>>>>>>> (mouse cursor can be moved), but then stop working. The laptop
>>>>>>>>>>>>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
>>>>>>>>>>>>>>>>> according to `fwupdmgr`.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> What are the exact steps to reproduce? Just "echo mem >
>>>>>>>>>>>>>>>> /sys/power/state" and then resume by pressing power button?
>>>>>>>>>>>>
>>>>>>>>>>>> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
>>>>>>>>>>>> display. So more than `echo mem > /sys/power/state` is done. What
>>>>>>>>>>>> distribution do you use?
>>>>>>>>>>>
>>>>>>>>>>> I have buildroot based "distro" so there is no UI running.
>>>>>>>>>>
>>>>>>>>>> Hmm, this is quite different from the “normal” use-case of the these devices.
>>>>>>>>>> That way you won’t hit the bugs of the normal users. ;-)
>>>>>>>>>
>>>>>>>>> Well, I can install some distro to that thing also :) I suppose Debian
>>>>>>>>> 10.2 does have this issue, no?
>>>>>>>>>
>>>>>>>>>>>>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
>>>>>>>>>>>>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I may have older/different firmware than you, though.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
>>>>>>>>>>>>>> on my system :/
>>>>>>>>>>>>
>>>>>>>>>>>> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
>>>>>>>>>>>> Updating to the recent version (I got the logs with) did not fix the issue.
>>>>>>>>>>>
>>>>>>>>>>> I also tried v40 (that was originally on that system) but I was not able
>>>>>>>>>>> to reproduce it.
>>>>>>>>>>>
>>>>>>>>>>> Do you know if the user changed any BIOS settings?
>>>>>>>>>>
>>>>>>>>>> We had to disable the Thunderbolt security settings as otherwise the USB
>>>>>>>>>> devices wouldn’t work at cold boot either.
>>>>>>>>>
>>>>>>>>> That does not sound right at all. There is the preboot ACL that allows
>>>>>>>>> you to use TBT dock aready on boot. Bolt takes care of this.
>>>>>>>>>
>>>>>>>>> Are you talking about USB devices connected to the TB16 dock?
>>>>>>>>>
>>>>>>>>> Also are you connecting the TB16 dock to the Thunderbolt ports (left
>>>>>>>>> side of the system marked with small lightning logo) or to the normal
>>>>>>>>> Type-C ports (right side)?
>>>>>>>>>
>>>>>>>>>> So, I built Linux 5.4-rc8 (`make bindeb-pkg -j8`), but unfortunately the
>>>>>>>>>> error is still there. Sometimes, re-plugging the dock helped, and sometimes
>>>>>>>>>> it did not.
>>>>>>>>>>
>>>>>>>>>> Please find the logs attached. The strange thing is, the Linux kernel detects
>>>>>>>>>> the devices and I do not see any disconnect events. But, `lsusb` does not list
>>>>>>>>>> the keyboard and the mouse. Is that expected.
>>>>>>>>>
>>>>>>>>> I'm bit confused. Can you describe the exact steps what you do (so I can
>>>>>>>>> replicate them).
>>>>>>>>
>>>>>>>> I managed to reproduce following scenario.
>>>>>>>>
>>>>>>>> 1. Boot the system up to UI
>>>>>>>> 2. Connect TB16 dock (and see that it gets authorized by bolt)
>>>>>>>> 3. Connect keyboard and mouse to the TB16 dock
>>>>>>>> 4. Both mouse and keyboard are functional
>>>>>>>> 5. Enter s2idle by closing laptop lid
>>>>>>>> 6. Exit s2idle by opening the laptop lid
>>>>>>>> 7. After ~10 seconds or so the mouse or keyboard or both do not work
>>>>>>>>      anymore. They do not respond but they are still "present".
>>>>>>>>
>>>>>>>> The above does not happen always but from time to time.
>>>>>>>>
>>>>>>>> Is this the scenario you see as well?
>>>>>>>
>>>>>>> Yes, it is. Though I’d say it’s only five seconds or so.
>>>>>>>
>>>>>>>> This is on Ubuntu 19.10 with the 5.3 stock kernel.
>>>>>>>
>>>>>>> “stock” in upstream’s or Ubuntu’s?
>>>>>>
>>>>>> It is Ubuntu's.
>>>>>>
>>>>>>>> I can get them work again by unplugging them and plugging back (leaving
>>>>>>>> the TBT16 dock connected). Also if you run lspci when the problem
>>>>>>>> occurs it still shows the dock so PCIe link stays up.
>>>>>>>
>>>>>>> Re-connecting the USB devices does not help here, but I still suspect it’s
>>>>>>> the same issue.
>>>>>>
>>>>>> Yeah, sounds like so. Did you try to connect the device (mouse,
>>>>>> keyboard) to another USB port?
>>>>>
>>>>> I do not think I did, but I can’t remember. Next week would be the next chance
>>>>> to test this.
>>>>>
>>>>>>> Yesterday, I had my hand on a Dell XPS 13 7390 (10th Intel generation) and
>>>>>>> tried it with the shipped Ubuntu 18.04 LTS. There, the problem was not
>>>>>>> always reproducible, but it still happened. Sometimes, only one of the USB
>>>>>>> device (either keyboard or mouse) stopped working.
>>>>>>
>>>>>> I suppose this is also with the TB16 dock connected, correct?
>>>>>
>>>>> Correct.
>>>>>
>>>>> Can I ask again, how the USB devices connected to the dock can be listed on
>>>>> the command line? lsusb needs to be adapted for that or is a different
>>>>> mechanism needed?
>>>>
>>>> The TB16 dock has ASMEDIA xHCI controller, which is PCIe device so you
>>>> can see it by running lsusb and looking at the devices under that
>>>> controller. I think maybe 'lsusb -t' is helpful.
>>>>
>>>> The xHCI controller itself you can see by running lspci.
>>>
>>> I got traces from the ASMedia xHC controller in the TB16 dock.
>>
>> Nice. Thank you for looking into that. How can these traces be captured?
> 
> The Linux tracepoints added to the xhci driver can be enabled by:
> 
> mount -t debugfs none /sys/kernel/debug
> echo 81920 > /sys/kernel/debug/tracing/buffer_size_kb
> echo 1 > /sys/kernel/debug/tracing/events/xhci-hcd/enable
> < Trigger the issue >
> 
> Copy traces found in /sys/kernel/debug/tracing/trace
> 
> Trace file grows fast.

>>> There are issues with split transactions between the ASMedia host and the 7 port
>>> High speed hub built in to the dock.
>>>
>>> host reports a split transaction error for mouse or keyboard full-speed/low-speed
>>> interrupt transactions. Endpoint doesn't recover after resetting it.
>>>
>>> Split transaction allows full- and low-speed devices to be attached to high-speed
>>> hubs, and are used only between the host and the HS hub. A transaction translator (TT)
>>> in the HS hub will translate the high-speed split transactions on its upstream port to
>>> low/full speed transactions on the downstream port.
>>>
>>> I'll see if there are any xHC parameters driver is setting that trigger these
>>> split transaction errors to trigger more easy.
>>
>> I always wonder how Microsoft Windows driver do it.
>>
>> Mario, should I contact the Dell support regarding this issue?
Sorry for bothering, but were you able to find some workaround for this issue?


Kind regards,

Paul


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-12-20 14:25                                 ` Paul Menzel
@ 2019-12-23  9:39                                   ` Mathias Nyman
  2020-01-17  9:56                                     ` Paul Menzel
  0 siblings, 1 reply; 34+ messages in thread
From: Mathias Nyman @ 2019-12-23  9:39 UTC (permalink / raw)
  To: Paul Menzel, Mika Westerberg
  Cc: Mario Limonciello, Andreas Noever, Michael Jamet,
	Yehezkel Bernat, Christian Kellner, linux-kernel, Anthony Wong

On 20.12.2019 16.25, Paul Menzel wrote:
> Dear Mathias,
> 
> 
> On 2019-11-26 13:44, Mathias Nyman wrote:
>> On 26.11.2019 13.33, Paul Menzel wrote:
> 
>>> On 2019-11-25 10:20, Mathias Nyman wrote:
>>>> On 22.11.2019 13.41, Mika Westerberg wrote:
>>>>> On Fri, Nov 22, 2019 at 12:33:44PM +0100, Paul Menzel wrote:
>>>
>>>>>> On 2019-11-22 12:29, Mika Westerberg wrote:
>>>>>>> On Fri, Nov 22, 2019 at 12:05:13PM +0100, Paul Menzel wrote:
>>>>>>
>>>>>>>> On 2019-11-22 11:50, Mika Westerberg wrote:
>>>>>>>>> On Wed, Nov 20, 2019 at 12:50:53PM +0200, Mika Westerberg wrote:
>>>>>>>>>> On Tue, Nov 19, 2019 at 05:55:43PM +0100, Paul Menzel wrote:
>>>>>>>>
>>>>>>>>>>> On 2019-11-04 17:21, Mika Westerberg wrote:
>>>>>>>>>>>> On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
>>>>>>>>>>>
>>>>>>>>>>>>> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
>>>>>>>>>>>>>>> Sent: Monday, November 4, 2019 9:45 AM
>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
>>>>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
>>>>>>>>>>>>>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
>>>>>>>>>>>>>>>>>> dock connected, the USB input devices, keyboard and mouse,
>>>>>>>>>>>>>>>>>> connected to the TB16 stop working. They work for a few seconds
>>>>>>>>>>>>>>>>>> (mouse cursor can be moved), but then stop working. The laptop
>>>>>>>>>>>>>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
>>>>>>>>>>>>>>>>>> according to `fwupdmgr`.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> What are the exact steps to reproduce? Just "echo mem >
>>>>>>>>>>>>>>>>> /sys/power/state" and then resume by pressing power button?
>>>>>>>>>>>>>
>>>>>>>>>>>>> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
>>>>>>>>>>>>> display. So more than `echo mem > /sys/power/state` is done. What
>>>>>>>>>>>>> distribution do you use?
>>>>>>>>>>>>
>>>>>>>>>>>> I have buildroot based "distro" so there is no UI running.
>>>>>>>>>>>
>>>>>>>>>>> Hmm, this is quite different from the “normal” use-case of the these devices.
>>>>>>>>>>> That way you won’t hit the bugs of the normal users. ;-)
>>>>>>>>>>
>>>>>>>>>> Well, I can install some distro to that thing also :) I suppose Debian
>>>>>>>>>> 10.2 does have this issue, no?
>>>>>>>>>>
>>>>>>>>>>>>>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
>>>>>>>>>>>>>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I may have older/different firmware than you, though.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
>>>>>>>>>>>>>>> on my system :/
>>>>>>>>>>>>>
>>>>>>>>>>>>> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
>>>>>>>>>>>>> Updating to the recent version (I got the logs with) did not fix the issue.
>>>>>>>>>>>>
>>>>>>>>>>>> I also tried v40 (that was originally on that system) but I was not able
>>>>>>>>>>>> to reproduce it.
>>>>>>>>>>>>
>>>>>>>>>>>> Do you know if the user changed any BIOS settings?
>>>>>>>>>>>
>>>>>>>>>>> We had to disable the Thunderbolt security settings as otherwise the USB
>>>>>>>>>>> devices wouldn’t work at cold boot either.
>>>>>>>>>>
>>>>>>>>>> That does not sound right at all. There is the preboot ACL that allows
>>>>>>>>>> you to use TBT dock aready on boot. Bolt takes care of this.
>>>>>>>>>>
>>>>>>>>>> Are you talking about USB devices connected to the TB16 dock?
>>>>>>>>>>
>>>>>>>>>> Also are you connecting the TB16 dock to the Thunderbolt ports (left
>>>>>>>>>> side of the system marked with small lightning logo) or to the normal
>>>>>>>>>> Type-C ports (right side)?
>>>>>>>>>>
>>>>>>>>>>> So, I built Linux 5.4-rc8 (`make bindeb-pkg -j8`), but unfortunately the
>>>>>>>>>>> error is still there. Sometimes, re-plugging the dock helped, and sometimes
>>>>>>>>>>> it did not.
>>>>>>>>>>>
>>>>>>>>>>> Please find the logs attached. The strange thing is, the Linux kernel detects
>>>>>>>>>>> the devices and I do not see any disconnect events. But, `lsusb` does not list
>>>>>>>>>>> the keyboard and the mouse. Is that expected.
>>>>>>>>>>
>>>>>>>>>> I'm bit confused. Can you describe the exact steps what you do (so I can
>>>>>>>>>> replicate them).
>>>>>>>>>
>>>>>>>>> I managed to reproduce following scenario.
>>>>>>>>>
>>>>>>>>> 1. Boot the system up to UI
>>>>>>>>> 2. Connect TB16 dock (and see that it gets authorized by bolt)
>>>>>>>>> 3. Connect keyboard and mouse to the TB16 dock
>>>>>>>>> 4. Both mouse and keyboard are functional
>>>>>>>>> 5. Enter s2idle by closing laptop lid
>>>>>>>>> 6. Exit s2idle by opening the laptop lid
>>>>>>>>> 7. After ~10 seconds or so the mouse or keyboard or both do not work
>>>>>>>>>       anymore. They do not respond but they are still "present".
>>>>>>>>>
>>>>>>>>> The above does not happen always but from time to time.
>>>>>>>>>
>>>>>>>>> Is this the scenario you see as well?
>>>>>>>>
>>>>>>>> Yes, it is. Though I’d say it’s only five seconds or so.
>>>>>>>>
>>>>>>>>> This is on Ubuntu 19.10 with the 5.3 stock kernel.
>>>>>>>>
>>>>>>>> “stock” in upstream’s or Ubuntu’s?
>>>>>>>
>>>>>>> It is Ubuntu's.
>>>>>>>
>>>>>>>>> I can get them work again by unplugging them and plugging back (leaving
>>>>>>>>> the TBT16 dock connected). Also if you run lspci when the problem
>>>>>>>>> occurs it still shows the dock so PCIe link stays up.
>>>>>>>>
>>>>>>>> Re-connecting the USB devices does not help here, but I still suspect it’s
>>>>>>>> the same issue.
>>>>>>>
>>>>>>> Yeah, sounds like so. Did you try to connect the device (mouse,
>>>>>>> keyboard) to another USB port?
>>>>>>
>>>>>> I do not think I did, but I can’t remember. Next week would be the next chance
>>>>>> to test this.
>>>>>>
>>>>>>>> Yesterday, I had my hand on a Dell XPS 13 7390 (10th Intel generation) and
>>>>>>>> tried it with the shipped Ubuntu 18.04 LTS. There, the problem was not
>>>>>>>> always reproducible, but it still happened. Sometimes, only one of the USB
>>>>>>>> device (either keyboard or mouse) stopped working.
>>>>>>>
>>>>>>> I suppose this is also with the TB16 dock connected, correct?
>>>>>>
>>>>>> Correct.
>>>>>>
>>>>>> Can I ask again, how the USB devices connected to the dock can be listed on
>>>>>> the command line? lsusb needs to be adapted for that or is a different
>>>>>> mechanism needed?
>>>>>
>>>>> The TB16 dock has ASMEDIA xHCI controller, which is PCIe device so you
>>>>> can see it by running lsusb and looking at the devices under that
>>>>> controller. I think maybe 'lsusb -t' is helpful.
>>>>>
>>>>> The xHCI controller itself you can see by running lspci.
>>>>
>>>> I got traces from the ASMedia xHC controller in the TB16 dock.
>>>
>>> Nice. Thank you for looking into that. How can these traces be captured?
>>
>> The Linux tracepoints added to the xhci driver can be enabled by:
>>
>> mount -t debugfs none /sys/kernel/debug
>> echo 81920 > /sys/kernel/debug/tracing/buffer_size_kb
>> echo 1 > /sys/kernel/debug/tracing/events/xhci-hcd/enable
>> < Trigger the issue >
>>
>> Copy traces found in /sys/kernel/debug/tracing/trace
>>
>> Trace file grows fast.
> 
>>>> There are issues with split transactions between the ASMedia host and the 7 port
>>>> High speed hub built in to the dock.
>>>>
>>>> host reports a split transaction error for mouse or keyboard full-speed/low-speed
>>>> interrupt transactions. Endpoint doesn't recover after resetting it.
>>>>
>>>> Split transaction allows full- and low-speed devices to be attached to high-speed
>>>> hubs, and are used only between the host and the HS hub. A transaction translator (TT)
>>>> in the HS hub will translate the high-speed split transactions on its upstream port to
>>>> low/full speed transactions on the downstream port.
>>>>
>>>> I'll see if there are any xHC parameters driver is setting that trigger these
>>>> split transaction errors to trigger more easy.
>>>
>>> I always wonder how Microsoft Windows driver do it.
>>>
>>> Mario, should I contact the Dell support regarding this issue?
> Sorry for bothering, but were you able to find some workaround for this issue?
> 

Unfortunately no, I couldn't find any workaround.
xhci slot and endpoint context values for both the HS hub, and the full/low speed device seem correct.

I was able to reproduce the issue with an external HS hub as well, so  this issue
appears to be more related to ASMedia host than the built in HS hub in TB16

-Mathias

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2019-12-23  9:39                                   ` Mathias Nyman
@ 2020-01-17  9:56                                     ` Paul Menzel
  2020-01-17 18:33                                       ` Mario.Limonciello
  0 siblings, 1 reply; 34+ messages in thread
From: Paul Menzel @ 2020-01-17  9:56 UTC (permalink / raw)
  To: Mathias Nyman, Mika Westerberg
  Cc: Mario Limonciello, Andreas Noever, Michael Jamet,
	Yehezkel Bernat, Christian Kellner, linux-kernel, Anthony Wong

[-- Attachment #1: Type: text/plain, Size: 9661 bytes --]

Dear Mathias, dear Mario,


On 2019-12-23 10:39, Mathias Nyman wrote:
> On 20.12.2019 16.25, Paul Menzel wrote:

>> On 2019-11-26 13:44, Mathias Nyman wrote:
>>> On 26.11.2019 13.33, Paul Menzel wrote:
>>
>>>> On 2019-11-25 10:20, Mathias Nyman wrote:
>>>>> On 22.11.2019 13.41, Mika Westerberg wrote:
>>>>>> On Fri, Nov 22, 2019 at 12:33:44PM +0100, Paul Menzel wrote:
>>>>
>>>>>>> On 2019-11-22 12:29, Mika Westerberg wrote:
>>>>>>>> On Fri, Nov 22, 2019 at 12:05:13PM +0100, Paul Menzel wrote:
>>>>>>>
>>>>>>>>> On 2019-11-22 11:50, Mika Westerberg wrote:
>>>>>>>>>> On Wed, Nov 20, 2019 at 12:50:53PM +0200, Mika Westerberg wrote:
>>>>>>>>>>> On Tue, Nov 19, 2019 at 05:55:43PM +0100, Paul Menzel wrote:
>>>>>>>>>
>>>>>>>>>>>> On 2019-11-04 17:21, Mika Westerberg wrote:
>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 05:11:10PM +0100, Paul Menzel wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>>> On 2019-11-04 16:49, Mario.Limonciello@dell.com wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> From: Mika Westerberg <mika.westerberg@linux.intel.com>
>>>>>>>>>>>>>>>> Sent: Monday, November 4, 2019 9:45 AM
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 04:44:40PM +0200, Mika Westerberg wrote:
>>>>>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 04:25:03PM +0200, Mika Westerberg wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Mon, Nov 04, 2019 at 02:13:13PM +0100, Paul Menzel wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On the Dell XPS 13 9380 with Debian Sid/unstable with Linux 5.3.7
>>>>>>>>>>>>>>>>>>> suspending the system, and resuming with Dell’s Thunderbolt TB16
>>>>>>>>>>>>>>>>>>> dock connected, the USB input devices, keyboard and mouse,
>>>>>>>>>>>>>>>>>>> connected to the TB16 stop working. They work for a few seconds
>>>>>>>>>>>>>>>>>>> (mouse cursor can be moved), but then stop working. The laptop
>>>>>>>>>>>>>>>>>>> keyboard and touchpad still works fine. All firmware is up-to-date
>>>>>>>>>>>>>>>>>>> according to `fwupdmgr`.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> What are the exact steps to reproduce? Just "echo mem >
>>>>>>>>>>>>>>>>>> /sys/power/state" and then resume by pressing power button?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> GNOME Shell 3.34.1+git20191024-1 is used, and the user just closes the
>>>>>>>>>>>>>> display. So more than `echo mem > /sys/power/state` is done. What
>>>>>>>>>>>>>> distribution do you use?
>>>>>>>>>>>>>
>>>>>>>>>>>>> I have buildroot based "distro" so there is no UI running.
>>>>>>>>>>>>
>>>>>>>>>>>> Hmm, this is quite different from the “normal” use-case of the these devices.
>>>>>>>>>>>> That way you won’t hit the bugs of the normal users. ;-)
>>>>>>>>>>>
>>>>>>>>>>> Well, I can install some distro to that thing also :) I suppose Debian
>>>>>>>>>>> 10.2 does have this issue, no?
>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I tried v5.4-rc6 on my 9380 with TB16 dock connected and did a couple of
>>>>>>>>>>>>>>>>> suspend/resume cycles (to s2idle) but I don't see any issues.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I may have older/different firmware than you, though.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Upgraded BIOS to 1.8.0 and TBT NVM to v44 but still can't reproduce this
>>>>>>>>>>>>>>>> on my system :/
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The user reported the issue with the previous firmwares 1.x and TBT NVM v40.
>>>>>>>>>>>>>> Updating to the recent version (I got the logs with) did not fix the issue.
>>>>>>>>>>>>>
>>>>>>>>>>>>> I also tried v40 (that was originally on that system) but I was not able
>>>>>>>>>>>>> to reproduce it.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Do you know if the user changed any BIOS settings?
>>>>>>>>>>>>
>>>>>>>>>>>> We had to disable the Thunderbolt security settings as otherwise the USB
>>>>>>>>>>>> devices wouldn’t work at cold boot either.
>>>>>>>>>>>
>>>>>>>>>>> That does not sound right at all. There is the preboot ACL that allows
>>>>>>>>>>> you to use TBT dock aready on boot. Bolt takes care of this.
>>>>>>>>>>>
>>>>>>>>>>> Are you talking about USB devices connected to the TB16 dock?
>>>>>>>>>>>
>>>>>>>>>>> Also are you connecting the TB16 dock to the Thunderbolt ports (left
>>>>>>>>>>> side of the system marked with small lightning logo) or to the normal
>>>>>>>>>>> Type-C ports (right side)?
>>>>>>>>>>>
>>>>>>>>>>>> So, I built Linux 5.4-rc8 (`make bindeb-pkg -j8`), but unfortunately the
>>>>>>>>>>>> error is still there. Sometimes, re-plugging the dock helped, and sometimes
>>>>>>>>>>>> it did not.
>>>>>>>>>>>>
>>>>>>>>>>>> Please find the logs attached. The strange thing is, the Linux kernel detects
>>>>>>>>>>>> the devices and I do not see any disconnect events. But, `lsusb` does not list
>>>>>>>>>>>> the keyboard and the mouse. Is that expected.
>>>>>>>>>>>
>>>>>>>>>>> I'm bit confused. Can you describe the exact steps what you do (so I can
>>>>>>>>>>> replicate them).
>>>>>>>>>>
>>>>>>>>>> I managed to reproduce following scenario.
>>>>>>>>>>
>>>>>>>>>> 1. Boot the system up to UI
>>>>>>>>>> 2. Connect TB16 dock (and see that it gets authorized by bolt)
>>>>>>>>>> 3. Connect keyboard and mouse to the TB16 dock
>>>>>>>>>> 4. Both mouse and keyboard are functional
>>>>>>>>>> 5. Enter s2idle by closing laptop lid
>>>>>>>>>> 6. Exit s2idle by opening the laptop lid
>>>>>>>>>> 7. After ~10 seconds or so the mouse or keyboard or both do not work
>>>>>>>>>>       anymore. They do not respond but they are still "present".
>>>>>>>>>>
>>>>>>>>>> The above does not happen always but from time to time.
>>>>>>>>>>
>>>>>>>>>> Is this the scenario you see as well?
>>>>>>>>>
>>>>>>>>> Yes, it is. Though I’d say it’s only five seconds or so.
>>>>>>>>>
>>>>>>>>>> This is on Ubuntu 19.10 with the 5.3 stock kernel.
>>>>>>>>>
>>>>>>>>> “stock” in upstream’s or Ubuntu’s?
>>>>>>>>
>>>>>>>> It is Ubuntu's.
>>>>>>>>
>>>>>>>>>> I can get them work again by unplugging them and plugging back (leaving
>>>>>>>>>> the TBT16 dock connected). Also if you run lspci when the problem
>>>>>>>>>> occurs it still shows the dock so PCIe link stays up.
>>>>>>>>>
>>>>>>>>> Re-connecting the USB devices does not help here, but I still suspect it’s
>>>>>>>>> the same issue.
>>>>>>>>
>>>>>>>> Yeah, sounds like so. Did you try to connect the device (mouse,
>>>>>>>> keyboard) to another USB port?
>>>>>>>
>>>>>>> I do not think I did, but I can’t remember. Next week would be the next chance
>>>>>>> to test this.
>>>>>>>
>>>>>>>>> Yesterday, I had my hand on a Dell XPS 13 7390 (10th Intel generation) and
>>>>>>>>> tried it with the shipped Ubuntu 18.04 LTS. There, the problem was not
>>>>>>>>> always reproducible, but it still happened. Sometimes, only one of the USB
>>>>>>>>> device (either keyboard or mouse) stopped working.
>>>>>>>>
>>>>>>>> I suppose this is also with the TB16 dock connected, correct?
>>>>>>>
>>>>>>> Correct.
>>>>>>>
>>>>>>> Can I ask again, how the USB devices connected to the dock can be listed on
>>>>>>> the command line? lsusb needs to be adapted for that or is a different
>>>>>>> mechanism needed?
>>>>>>
>>>>>> The TB16 dock has ASMEDIA xHCI controller, which is PCIe device so you
>>>>>> can see it by running lsusb and looking at the devices under that
>>>>>> controller. I think maybe 'lsusb -t' is helpful.
>>>>>>
>>>>>> The xHCI controller itself you can see by running lspci.
>>>>>
>>>>> I got traces from the ASMedia xHC controller in the TB16 dock.
>>>>
>>>> Nice. Thank you for looking into that. How can these traces be captured?
>>>
>>> The Linux tracepoints added to the xhci driver can be enabled by:
>>>
>>> mount -t debugfs none /sys/kernel/debug
>>> echo 81920 > /sys/kernel/debug/tracing/buffer_size_kb
>>> echo 1 > /sys/kernel/debug/tracing/events/xhci-hcd/enable
>>> < Trigger the issue >
>>>
>>> Copy traces found in /sys/kernel/debug/tracing/trace
>>>
>>> Trace file grows fast.
>>
>>>>> There are issues with split transactions between the ASMedia host and the 7 port
>>>>> High speed hub built in to the dock.
>>>>>
>>>>> host reports a split transaction error for mouse or keyboard full-speed/low-speed
>>>>> interrupt transactions. Endpoint doesn't recover after resetting it.
>>>>>
>>>>> Split transaction allows full- and low-speed devices to be attached to high-speed
>>>>> hubs, and are used only between the host and the HS hub. A transaction translator (TT)
>>>>> in the HS hub will translate the high-speed split transactions on its upstream port to
>>>>> low/full speed transactions on the downstream port.
>>>>>
>>>>> I'll see if there are any xHC parameters driver is setting that trigger these
>>>>> split transaction errors to trigger more easy.
>>>>
>>>> I always wonder how Microsoft Windows driver do it.
>>>>
>>>> Mario, should I contact the Dell support regarding this issue?
>> Sorry for bothering, but were you able to find some workaround for
>> this issue?
> 
> Unfortunately no, I couldn't find any workaround.
> xhci slot and endpoint context values for both the HS hub, and the
> full/low speed device seem correct.
> 
> I was able to reproduce the issue with an external HS hub as well, so  this issue
> appears to be more related to ASMedia host than the built in HS hub in TB16

I contacted the (German) Dell support, and they asked me to update the laptop
firmware to 1.9.1 claiming that these issues might be fixed there (despite the
change-log not containing that). Anyway, after the update, the user is still
able to reproduce the issue.

Mario, what can I do, so the issue is escalated to your team, so you can work
with ASMedia to solve this?


Kind regards,

Paul


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]

^ permalink raw reply	[flat|nested] 34+ messages in thread

* RE: USB devices on Dell TB16 dock stop working after resuming
  2020-01-17  9:56                                     ` Paul Menzel
@ 2020-01-17 18:33                                       ` Mario.Limonciello
  2020-01-18  9:15                                         ` Paul Menzel
  0 siblings, 1 reply; 34+ messages in thread
From: Mario.Limonciello @ 2020-01-17 18:33 UTC (permalink / raw)
  To: pmenzel, mathias.nyman, mika.westerberg
  Cc: andreas.noever, michael.jamet, YehezkelShB, ck, linux-kernel,
	anthony.wong

> > I was able to reproduce the issue with an external HS hub as well, so  this issue
> > appears to be more related to ASMedia host than the built in HS hub in TB16
> 
> I contacted the (German) Dell support, and they asked me to update the laptop
> firmware to 1.9.1 claiming that these issues might be fixed there (despite the
> change-log not containing that). Anyway, after the update, the user is still
> able to reproduce the issue.
> 
> Mario, what can I do, so the issue is escalated to your team, so you can work
> with ASMedia to solve this?
> 
> 
> Kind regards,
> 
> Paul

From this thread it does sound to me like an ASMedia firmware problem,
not a Linux kernel problem.

I do know there is an updated ASMedia firmware binary available.  Right now
however there is unfortunately not a way to update ASMedia hub firmware using
free software.  If possible, I would recommend that you try to update the
firmware using a Windows machine and see if it helps the problem.

I'm sorry and I don't intend to "pass the buck" but if that doesn't help this needs
to be prioritized and escalated with Dell support.

They will then work with the appropriate engineering team who owns the relationship
to ASMedia to resolve it.

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2020-01-17 18:33                                       ` Mario.Limonciello
@ 2020-01-18  9:15                                         ` Paul Menzel
  2020-01-27 22:16                                           ` Paul Menzel
  0 siblings, 1 reply; 34+ messages in thread
From: Paul Menzel @ 2020-01-18  9:15 UTC (permalink / raw)
  To: Mario Limonciello, Mathias Nyman, Mika Westerberg
  Cc: andreas.noever, michael.jamet, YehezkelShB, ck, linux-kernel,
	Anthony Wong

Dear Mario,


Am 17.01.20 um 19:33 schrieb Mario.Limonciello@dell.com:
>>> I was able to reproduce the issue with an external HS hub as well, so  this issue
>>> appears to be more related to ASMedia host than the built in HS hub in TB16
>>
>> I contacted the (German) Dell support, and they asked me to update the laptop
>> firmware to 1.9.1 claiming that these issues might be fixed there (despite the
>> change-log not containing that). Anyway, after the update, the user is still
>> able to reproduce the issue.
>>
>> Mario, what can I do, so the issue is escalated to your team, so you can work
>> with ASMedia to solve this?

> From this thread it does sound to me like an ASMedia firmware problem,
> not a Linux kernel problem.
> 
> I do know there is an updated ASMedia firmware binary available.  Right now
> however there is unfortunately not a way to update ASMedia hub firmware using
> free software. 

The fwupd issue *Dell TB16: ASMedia USB controller can't be updated* [1] 
was closed by the “stale robot”.

> If possible, I would recommend that you try to update the
> firmware using a Windows machine and see if it helps the problem.

Thank you. I’ll try to do that on Monday.

> I'm sorry and I don't intend to "pass the buck" but if that doesn't help this needs
> to be prioritized and escalated with Dell support.
> 
> They will then work with the appropriate engineering team who owns the relationship
> to ASMedia to resolve it.

That’s how it should work theoretically, but have you ever dealt with 
Dell’s first level support? They have little experience with Ubuntu, and 
if you are unlucky, they say that Ubuntu support is not done by Dell but 
“by the Linux community”. If you are lucky to not get this answer, they 
do (Google) searches, telling you, your problem is solved by referencing 
only similar sounding problems from the Ubuntu *user* forums. If the 
firmware has a bug (in the UI!), they ask you to install Microsoft 
Windows to see if that solves the issue. If you tell them, the Linux 
developers analyzed the problem, and they say the following solution 
have to be found, they do not know what that means. It’s very annoying 
and time consuming often for naught.


Kind regards,

Paul


[1]: https://github.com/fwupd/fwupd/issues/1351

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2020-01-18  9:15                                         ` Paul Menzel
@ 2020-01-27 22:16                                           ` Paul Menzel
  2020-02-05 13:10                                             ` Paul Menzel
  0 siblings, 1 reply; 34+ messages in thread
From: Paul Menzel @ 2020-01-27 22:16 UTC (permalink / raw)
  To: Mario Limonciello, Mathias Nyman
  Cc: Mika Westerberg, andreas.noever, michael.jamet, YehezkelShB, ck,
	linux-kernel, Anthony Wong

Dear Mario, dear Mathias,


Am 18.01.20 um 10:15 schrieb Paul Menzel:

> Am 17.01.20 um 19:33 schrieb Mario.Limonciello@dell.com:
>>>> I was able to reproduce the issue with an external HS hub as well, 
>>>> so  this issue
>>>> appears to be more related to ASMedia host than the built in HS hub 
>>>> in TB16
>>>
>>> I contacted the (German) Dell support, and they asked me to update 
>>> the laptop
>>> firmware to 1.9.1 claiming that these issues might be fixed there 
>>> (despite the
>>> change-log not containing that). Anyway, after the update, the user 
>>> is still
>>> able to reproduce the issue.
>>>
>>> Mario, what can I do, so the issue is escalated to your team, so you 
>>> can work
>>> with ASMedia to solve this?
> 
>> From this thread it does sound to me like an ASMedia firmware problem,
>> not a Linux kernel problem.
>>
>> I do know there is an updated ASMedia firmware binary available.  
>> Right now
>> however there is unfortunately not a way to update ASMedia hub 
>> firmware using
>> free software. 
> 
> The fwupd issue *Dell TB16: ASMedia USB controller can't be updated* [1] 
> was closed by the “stale robot”.
> 
>> If possible, I would recommend that you try to update the
>> firmware using a Windows machine and see if it helps the problem.
> 
> Thank you. I’ll try to do that on Monday.
> 
>> I'm sorry and I don't intend to "pass the buck" but if that doesn't 
>> help this needs
>> to be prioritized and escalated with Dell support.
>>
>> They will then work with the appropriate engineering team who owns the 
>> relationship to ASMedia to resolve it.
> 
> That’s how it should work theoretically, but have you ever dealt with 
> Dell’s first level support? They have little experience with Ubuntu, and 
> if you are unlucky, they say that Ubuntu support is not done by Dell but 
> “by the Linux community”. If you are lucky to not get this answer, they 
> do (Google) searches, telling you, your problem is solved by referencing 
> only similar sounding problems from the Ubuntu *user* forums. If the 
> firmware has a bug (in the UI!), they ask you to install Microsoft 
> Windows to see if that solves the issue. If you tell them, the Linux 
> developers analyzed the problem, and they say the following solution 
> have to be found, they do not know what that means. It’s very annoying 
> and time consuming often for naught.

As reported in [1], updating the Dell TB16 firmware using a *Dell* 
laptop (with updated firmware and Thunderbolt drivers) and Dell’s 
Microsoft Windows update utility, the firmware parts below were updated, 
everything seems to work now.

MST1                 3.10.002    3.12.002
MST2                 3.10.002    3.12.002
ASM USB 3.0 Cntlr    10.11.23    10.11.A9
Dock NVM             00.00.16    00.00.27

Mathias, can you please confirm, and maybe also approach ASMedia from 
Intel to ask them to improve the situation?

Can the Linux kernel (or some user space) carry a list of non-working 
firmware versions, and output a warning, that a firmware update is needed?


Kind regards,

Paul


> [1]: https://github.com/fwupd/fwupd/issues/1351

^ permalink raw reply	[flat|nested] 34+ messages in thread

* Re: USB devices on Dell TB16 dock stop working after resuming
  2020-01-27 22:16                                           ` Paul Menzel
@ 2020-02-05 13:10                                             ` Paul Menzel
  0 siblings, 0 replies; 34+ messages in thread
From: Paul Menzel @ 2020-02-05 13:10 UTC (permalink / raw)
  To: Mario Limonciello, Mathias Nyman
  Cc: Mika Westerberg, andreas.noever, michael.jamet, YehezkelShB, ck,
	linux-kernel, Anthony Wong


Dear Mario, dear Mathias,


Am 27.01.20 um 23:16 schrieb Paul Menzel:

> Am 18.01.20 um 10:15 schrieb Paul Menzel:
> 
>> Am 17.01.20 um 19:33 schrieb Mario.Limonciello@dell.com:
>>>>> I was able to reproduce the issue with an external HS hub as well, 
>>>>> so  this issue appears to be more related to ASMedia host
>>>>> than the built in HS hub in TB16
>>>>
>>>> I contacted the (German) Dell support, and they asked me to
>>>> update the laptop firmware to 1.9.1 claiming that these issues
>>>> might be fixed there (despite the change-log not containing
>>>> that). Anyway, after the update, the user is still able to
>>>> reproduce the issue.
>>>>
>>>> Mario, what can I do, so the issue is escalated to your team, so you 
>>>> can work with ASMedia to solve this?
>>
>>> From this thread it does sound to me like an ASMedia firmware problem,
>>> not a Linux kernel problem.
>>>
>>> I do know there is an updated ASMedia firmware binary available. 
>>> Right now however there is unfortunately not a way to update
>>> ASMedia hub firmware using free software.
>>
>> The fwupd issue *Dell TB16: ASMedia USB controller can't be updated* 
>> [1] was closed by the “stale robot”.
>>
>>> If possible, I would recommend that you try to update the
>>> firmware using a Windows machine and see if it helps the problem.
>>
>> Thank you. I’ll try to do that on Monday.
>>
>>> I'm sorry and I don't intend to "pass the buck" but if that doesn't 
>>> help this needs to be prioritized and escalated with Dell support.
>>>
>>> They will then work with the appropriate engineering team who owns 
>>> the relationship to ASMedia to resolve it.
>>
>> That’s how it should work theoretically, but have you ever dealt with 
>> Dell’s first level support? They have little experience with Ubuntu, 
>> and if you are unlucky, they say that Ubuntu support is not done by 
>> Dell but “by the Linux community”. If you are lucky to not get this 
>> answer, they do (Google) searches, telling you, your problem is solved 
>> by referencing only similar sounding problems from the Ubuntu *user* 
>> forums. If the firmware has a bug (in the UI!), they ask you to 
>> install Microsoft Windows to see if that solves the issue. If you tell 
>> them, the Linux developers analyzed the problem, and they say the 
>> following solution have to be found, they do not know what that means. 
>> It’s very annoying and time consuming often for naught.
> 
> As reported in [1], updating the Dell TB16 firmware using a *Dell* 
> laptop (with updated firmware and Thunderbolt drivers) and Dell’s 
> Microsoft Windows update utility, the firmware parts below were updated, 
> everything seems to work now.
> 
> MST1                 3.10.002    3.12.002
> MST2                 3.10.002    3.12.002
> ASM USB 3.0 Cntlr    10.11.23    10.11.A9
> Dock NVM             00.00.16    00.00.27
> 
> Mathias, can you please confirm, and maybe also approach ASMedia from 
> Intel to ask them to improve the situation?
> 
> Can the Linux kernel (or some user space) carry a list of non-working 
> firmware versions, and output a warning, that a firmware update is needed?

After testing this some more, the user reports, that the situation 
actually got worse.

No the docking station additionally disconnects randomly when working 
with the system. This did not happen before. Only the Ethernet port of 
the docking station works more reliably now.

Mathias, can you confirm this behavior? Is it the same problem as before?


Kind regards,

Paul


>> [1]: https://github.com/fwupd/fwupd/issues/1351

^ permalink raw reply	[flat|nested] 34+ messages in thread

end of thread, other threads:[~2020-02-05 13:10 UTC | newest]

Thread overview: 34+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-04 13:13 USB devices on Dell TB16 dock stop working after resuming Paul Menzel
2019-11-04 14:24 ` Mika Westerberg
2019-11-04 14:44   ` Mika Westerberg
2019-11-04 15:44     ` Mika Westerberg
2019-11-04 15:49       ` Mario.Limonciello
2019-11-04 16:11         ` Paul Menzel
2019-11-04 16:17           ` Mario.Limonciello
2019-11-04 16:22             ` Paul Menzel
2019-11-04 16:21           ` Mika Westerberg
2019-11-19 16:55             ` Paul Menzel
2019-11-19 17:20               ` Paul Menzel
2019-11-20 10:50               ` Mika Westerberg
2019-11-20 14:15                 ` Mario.Limonciello
2019-11-20 15:23                   ` Mika Westerberg
2019-11-20 17:06                     ` Mario.Limonciello
2019-11-20 17:16                       ` Yehezkel Bernat
2019-11-20 17:41                         ` Mario.Limonciello
2019-11-20 17:43                         ` Mika Westerberg
2019-11-20 17:39                       ` Mika Westerberg
2019-11-22 10:50                 ` Mika Westerberg
2019-11-22 11:05                   ` Paul Menzel
2019-11-22 11:29                     ` Mika Westerberg
2019-11-22 11:33                       ` Paul Menzel
2019-11-22 11:41                         ` Mika Westerberg
2019-11-25  9:20                           ` Mathias Nyman
2019-11-26 11:33                             ` Paul Menzel
2019-11-26 12:44                               ` Mathias Nyman
2019-12-20 14:25                                 ` Paul Menzel
2019-12-23  9:39                                   ` Mathias Nyman
2020-01-17  9:56                                     ` Paul Menzel
2020-01-17 18:33                                       ` Mario.Limonciello
2020-01-18  9:15                                         ` Paul Menzel
2020-01-27 22:16                                           ` Paul Menzel
2020-02-05 13:10                                             ` Paul Menzel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).