From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5A7D1C4332F for ; Tue, 1 Nov 2022 17:12:56 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230221AbiKARMy (ORCPT ); Tue, 1 Nov 2022 13:12:54 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:43344 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230121AbiKARMn (ORCPT ); Tue, 1 Nov 2022 13:12:43 -0400 Received: from mga12.intel.com (mga12.intel.com [192.55.52.136]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 12508186D6; Tue, 1 Nov 2022 10:12:41 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=intel.com; i=@intel.com; q=dns/txt; s=Intel; t=1667322761; x=1698858761; h=message-id:date:mime-version:from:subject:to:cc: references:in-reply-to:content-transfer-encoding; bh=ZCkEeuqR8YC45ozsCK+3feVc99hjufKCkoltY2uwWiQ=; b=GYNBMMfHwpX8h2nqCFZbynPwaHjkp/zVryu+ePpWaDibIHKYctSxmH1r LVTsIXXG6aI3D8uqQ6/OJS6TXnu9kmRPDFkisG8cbqFZ7IECoJOVMn9oe 8mcpdtBFwpdCc5W0bfo9iA4cTjhB3SlX40Z0KQkBHVYjhJecYuQdk1eMt 4X6esDv99/Kwwb22znkoMg5wLpyRpddb6F4BOO76/BmlJj26EnIqm5o/H +CP9xv4Fgon7xbgNd0uPFQXP8YCPYeLGtYlfRyJeEL+7J1K6uotSPMImh 2eZcKUVXP6U5ho+endlF7EXWLKWkYyt+35G1k/H9HLjGIz07baLDaDYq8 g==; X-IronPort-AV: E=McAfee;i="6500,9779,10518"; a="288905323" X-IronPort-AV: E=Sophos;i="5.95,231,1661842800"; d="scan'208";a="288905323" Received: from fmsmga003.fm.intel.com ([10.253.24.29]) by fmsmga106.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 01 Nov 2022 10:12:40 -0700 X-IronPort-AV: E=McAfee;i="6500,9779,10518"; a="723228572" X-IronPort-AV: E=Sophos;i="5.95,231,1661842800"; d="scan'208";a="723228572" Received: from ahunter6-mobl1.ger.corp.intel.com (HELO [10.0.2.15]) ([10.252.55.64]) by fmsmga003-auth.fm.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 01 Nov 2022 10:12:37 -0700 Message-ID: Date: Tue, 1 Nov 2022 19:12:33 +0200 MIME-Version: 1.0 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101 Firefox/102.0 Thunderbird/102.4.1 From: Adrian Hunter Subject: Re: [PATCH V5 08/26] mmc: sdhci: add UHS-II related definitions in headers To: Victor Shih , ulf.hansson@linaro.org Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, benchuanggli@gmail.com, HL.Liu@genesyslogic.com.tw, Greg.tu@genesyslogic.com.tw, takahiro.akashi@linaro.org, dlunev@chromium.org, Victor Shih , Ben Chuang References: <20221019110647.11076-1-victor.shih@genesyslogic.com.tw> <20221019110647.11076-9-victor.shih@genesyslogic.com.tw> Content-Language: en-US Organization: Intel Finland Oy, Registered Address: PL 281, 00181 Helsinki, Business Identity Code: 0357606 - 4, Domiciled in Helsinki In-Reply-To: <20221019110647.11076-9-victor.shih@genesyslogic.com.tw> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 19/10/22 14:06, Victor Shih wrote: > Add UHS-II related definitions in shdci.h and sdhci-uhs2.h. > > Signed-off-by: Ben Chuang > Signed-off-by: AKASHI Takahiro > Signed-off-by: Victor Shih > --- I hope you don't mind, but some of the names seem a bit long, or could be more like regular SDHCI equivalents. Also BIT() anf GENMASK() could be used more in some cases. See comments below. > drivers/mmc/host/sdhci-uhs2.h | 210 ++++++++++++++++++++++++++++++++++ > drivers/mmc/host/sdhci.h | 73 +++++++++++- > 2 files changed, 282 insertions(+), 1 deletion(-) > create mode 100644 drivers/mmc/host/sdhci-uhs2.h > > diff --git a/drivers/mmc/host/sdhci-uhs2.h b/drivers/mmc/host/sdhci-uhs2.h > new file mode 100644 > index 000000000000..5610affebdf3 > --- /dev/null > +++ b/drivers/mmc/host/sdhci-uhs2.h > @@ -0,0 +1,210 @@ > +/* SPDX-License-Identifier: GPL-2.0-or-later */ > +/* > + * linux/drivers/mmc/host/sdhci-uhs2.h - Secure Digital Host Controller > + * Interface driver > + * > + * Header file for Host Controller UHS2 related registers and I/O accessors. I/O accessors? > + * > + * Copyright (C) 2014 Intel Corp, All Rights Reserved. > + */ > +#ifndef __SDHCI_UHS2_H > +#define __SDHCI_UHS2_H > + > +#include > + > +/* > + * UHS-II Controller registers > + * 0x74 preset in sdhci.h > + * 0x80 > + * 0x84-0xB4 > + * 0xB8-0xCF > + * 0xE0-0xE7 > + */ > +/* UHS2 */ Rather than above, let's just have one simple comment: /* SDHCI Category B registers : UHS2 only */ > +#define SDHCI_UHS2_BLOCK_SIZE 0x80 > +#define SDHCI_UHS2_MAKE_BLKSZ(dma, blksz) \ > + ((((dma) & 0x7) << 12) | ((blksz) & 0xFFF)) I would prefer to wrap only lines over 100 columns > + > +#define SDHCI_UHS2_BLOCK_COUNT 0x84 > + > +#define SDHCI_UHS2_CMD_PACKET 0x88 > +#define SDHCI_UHS2_CMD_PACK_MAX_LEN 20 > + > +#define SDHCI_UHS2_TRANS_MODE 0x9C > +#define SDHCI_UHS2_TRNS_DMA BIT(0) > +#define SDHCI_UHS2_TRNS_BLK_CNT_EN BIT(1) > +#define SDHCI_UHS2_TRNS_DATA_TRNS_WRT BIT(4) > +#define SDHCI_UHS2_TRNS_BLK_BYTE_MODE BIT(5) > +#define SDHCI_UHS2_TRNS_RES_R5 BIT(6) > +#define SDHCI_UHS2_TRNS_RES_ERR_CHECK_EN BIT(7) > +#define SDHCI_UHS2_TRNS_RES_INT_DIS BIT(8) > +#define SDHCI_UHS2_TRNS_WAIT_EBSY BIT(14) > +#define SDHCI_UHS2_TRNS_2L_HD BIT(15) > + > +#define SDHCI_UHS2_COMMAND 0x9E Please line up all the values. Also some names could be shortened. There are suggestions in the comments below. > +#define SDHCI_UHS2_COMMAND_SUB_CMD 0x0004 Please use BIT() and GENMASK() macros here and elsewhere. Also could keep the name "SDHCI_UHS2_COMMAND" for the register but abbreviate "COMMAND" to "CMD" for the fields. SDHCI_COMMAND register does it that way. > +#define SDHCI_UHS2_COMMAND_DATA 0x0020 > +#define SDHCI_UHS2_COMMAND_TRNS_ABORT 0x0040 > +#define SDHCI_UHS2_COMMAND_CMD12 0x0080 > +#define SDHCI_UHS2_COMMAND_DORMANT 0x00C0 > +#define SDHCI_UHS2_COMMAND_PACK_LEN_MASK GENMASK(12, 8) > +#define SDHCI_UHS2_COMMAND_PACK_LEN_SHIFT 8 If possible, please avoid macros for shift value. Instead use FIELD_GET() and FIELD_PREP(), or even __bf_shf() if FIELD_GET() and FIELD_PREP() don't work. > + > +#define SDHCI_UHS2_RESPONSE 0xA0 > +#define SDHCI_UHS2_RESPONSE_MAX_LEN 20 > + > +#define SDHCI_UHS2_MSG_SELECT 0xB4 > +#define SDHCI_UHS2_MSG_SELECT_CURR 0x0 > +#define SDHCI_UHS2_MSG_SELECT_ONE 0x1 > +#define SDHCI_UHS2_MSG_SELECT_TWO 0x2 > +#define SDHCI_UHS2_MSG_SELECT_THREE 0x3 > + > +#define SDHCI_UHS2_MSG 0xB8 > + > +#define SDHCI_UHS2_DEV_INT_STATUS 0xBC > + > +#define SDHCI_UHS2_DEV_SELECT 0xBE > +#define SDHCI_UHS2_DEV_SELECT_DEV_SEL_MASK GENMASK(3, 0) Perhaps just SDHCI_UHS2_DEV_SEL_MASK > +#define SDHCI_UHS2_DEV_SELECT_INT_MSG_EN BIT(7) Perhaps just SDHCI_UHS2_DEV_SEL_INT_MSG_EN > + > +#define SDHCI_UHS2_DEV_INT_CODE 0xBF > + > +#define SDHCI_UHS2_SW_RESET 0xC0 > +#define SDHCI_UHS2_SW_RESET_FULL 0x0001 > +#define SDHCI_UHS2_SW_RESET_SD 0x0002 Please use BIT() macros > + > +#define SDHCI_UHS2_TIMER_CTRL 0xC2 > +#define SDHCI_UHS2_TIMER_CTRL_DEADLOCK_SHIFT 4 Please use GENMASK() > + > +#define SDHCI_UHS2_ERR_INT_STATUS 0xC4 > +#define SDHCI_UHS2_ERR_INT_STATUS_EN 0xC8 > +#define SDHCI_UHS2_ERR_INT_SIG_EN 0xCC Let's make those 3 more like regular SDHCI names i.e. #define SDHCI_UHS2_INT_STATUS 0xC4 #define SDHCI_UHS2_INT_STATUS_ENABLE 0xC8 #define SDHCI_UHS2_INT_SIGNAL_ENABLE 0xCC > +#define SDHCI_UHS2_ERR_INT_STATUS_HEADER BIT(0) > +#define SDHCI_UHS2_ERR_INT_STATUS_RES BIT(1) > +#define SDHCI_UHS2_ERR_INT_STATUS_RETRY_EXP BIT(2) > +#define SDHCI_UHS2_ERR_INT_STATUS_CRC BIT(3) > +#define SDHCI_UHS2_ERR_INT_STATUS_FRAME BIT(4) > +#define SDHCI_UHS2_ERR_INT_STATUS_TID BIT(5) > +#define SDHCI_UHS2_ERR_INT_STATUS_UNRECOVER BIT(7) > +#define SDHCI_UHS2_ERR_INT_STATUS_EBUSY BIT(8) > +#define SDHCI_UHS2_ERR_INT_STATUS_ADMA BIT(15) > +#define SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT BIT(16) > +#define SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT BIT(17) > +#define SDHCI_UHS2_ERR_INT_STATUS_VENDOR BIT(27) Again, let's make the interrupt bits above more like regular SDHCI names i.e. #define SDHCI_UHS2_INT_HEADER_ERR BIT(0) #define SDHCI_UHS2_INT_RES_ERR BIT(1) #define SDHCI_UHS2_INT_RETRY_EXP BIT(2) #define SDHCI_UHS2_INT_CRC BIT(3) #define SDHCI_UHS2_INT_FRAME_ERR BIT(4) #define SDHCI_UHS2_INT_TID_ERR BIT(5) #define SDHCI_UHS2_INT_UNRECOVERABLE BIT(7) #define SDHCI_UHS2_INT_EBUSY_ERR BIT(8) #define SDHCI_UHS2_INT_ADMA_ERROR BIT(15) #define SDHCI_UHS2_INT_CMD_TIMEOUT BIT(16) #define SDHCI_UHS2_INT_DEADLOCK_TIMEOUT BIT(17) #define SDHCI_UHS2_INT_VENDOR_ERR BIT(27) > +#define SDHCI_UHS2_ERR_INT_STATUS_MASK \ More like regular SDHCI name #define SDHCI_UHS2_INT_ERROR_MASK > + (SDHCI_UHS2_ERR_INT_STATUS_HEADER | \ > + SDHCI_UHS2_ERR_INT_STATUS_RES | \ > + SDHCI_UHS2_ERR_INT_STATUS_RETRY_EXP | \ > + SDHCI_UHS2_ERR_INT_STATUS_CRC | \ > + SDHCI_UHS2_ERR_INT_STATUS_FRAME | \ > + SDHCI_UHS2_ERR_INT_STATUS_TID | \ > + SDHCI_UHS2_ERR_INT_STATUS_UNRECOVER | \ > + SDHCI_UHS2_ERR_INT_STATUS_EBUSY | \ > + SDHCI_UHS2_ERR_INT_STATUS_ADMA | \ > + SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT | \ > + SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT) > +#define SDHCI_UHS2_ERR_INT_STATUS_CMD_MASK \ SDHCI_UHS2_INT_CMD_ERR_MASK > + (SDHCI_UHS2_ERR_INT_STATUS_HEADER | \ > + SDHCI_UHS2_ERR_INT_STATUS_RES | \ > + SDHCI_UHS2_ERR_INT_STATUS_FRAME | \ > + SDHCI_UHS2_ERR_INT_STATUS_TID | \ > + SDHCI_UHS2_ERR_INT_STATUS_RES_TIMEOUT) > +/* CRC Error occurs during a packet receiving */ > +#define SDHCI_UHS2_ERR_INT_STATUS_DATA_MASK \ SDHCI_UHS2_INT_DATA_ERR_MASK > + (SDHCI_UHS2_ERR_INT_STATUS_RETRY_EXP | \ > + SDHCI_UHS2_ERR_INT_STATUS_CRC | \ > + SDHCI_UHS2_ERR_INT_STATUS_UNRECOVER | \ > + SDHCI_UHS2_ERR_INT_STATUS_EBUSY | \ > + SDHCI_UHS2_ERR_INT_STATUS_ADMA | \ > + SDHCI_UHS2_ERR_INT_STATUS_DEADLOCK_TIMEOUT) > + > +#define SDHCI_UHS2_SET_PTR 0xE0 "SET" is not clear. "SETTINGS" would be better > +#define SDHCI_UHS2_GEN_SET_POWER_LOW 0x0001 Please use BIT() macros > +#define SDHCI_UHS2_GEN_SET_N_LANES_POS 8 Please use GENMASK() Also I would call this SDHCI_UHS2_LANES > +#define SDHCI_UHS2_GEN_SET_2L_FD_HD 0x0 > +#define SDHCI_UHS2_GEN_SET_2D1U_FD 0x2 > +#define SDHCI_UHS2_GEN_SET_1D2U_FD 0x3 > +#define SDHCI_UHS2_GEN_SET_2D2U_FD 0x4 #define SDHCI_UHS2_FD_OR_2L_HD 0 /* 2 lanes */ #define SDHCI_UHS2_2D1U_FD 2 /* 3 lanes, 2 down, 1 up, full duplex */ #define SDHCI_UHS2_1D2U_FD 3 /* 3 lanes, 1 down, 2 up, full duplex */ #define SDHCI_UHS2_2D2U_FD 4 /* 4 lanes, 2 down, 2 up, full duplex */ > + > +#define SDHCI_UHS2_PHY_SET_SPEED_POS 6 Please use GENMASK() > +#define SDHCI_UHS2_PHY_SET_HIBER_EN BIT(12) HIBER -> HIBERNATE > +#define SDHCI_UHS2_PHY_SET_N_LSS_SYN_MASK GENMASK(19, 16) > +#define SDHCI_UHS2_PHY_SET_N_LSS_SYN_POS 16 > +#define SDHCI_UHS2_PHY_SET_N_LSS_DIR_MASK GENMASK(23, 20) > +#define SDHCI_UHS2_PHY_SET_N_LSS_DIR_POS 20 > + > +#define SDHCI_UHS2_TRAN_SET_N_FCU_MASK GENMASK(15, 8) > +#define SDHCI_UHS2_TRAN_SET_N_FCU_POS 8 > +#define SDHCI_UHS2_TRAN_SET_RETRY_CNT_MASK GENMASK(17, 16) > +#define SDHCI_UHS2_TRAN_SET_RETRY_CNT_POS 16 > + > +#define SDHCI_UHS2_TRAN_SET_1_N_DAT_GAP_MASK GENMASK(7, 0) "_SET_" in the names above is not needed Also please do not use *_POS macros - use FEILD_GET() and FIELD_PREP() > + > +#define SDHCI_UHS2_HOST_CAPS_PTR 0xE2 To make them shorter, let's change all "SDHCI_UHS2_HOST_CAPS_" to "SDHCI_UHS2_CAP_" Also _GEN_ is a bit meaningless in the field names, and no _SHIFT please > +#define SDHCI_UHS2_HOST_CAPS_GEN_OFFSET 0 > +#define SDHCI_UHS2_HOST_CAPS_GEN_DAP_MASK GENMASK(3, 0) > +#define SDHCI_UHS2_HOST_CAPS_GEN_GAP_MASK GENMASK(7, 4) > +#define SDHCI_UHS2_HOST_CAPS_GEN_GAP(gap) ((gap) * 360) > +#define SDHCI_UHS2_HOST_CAPS_GEN_GAP_SHIFT 4 > +#define SDHCI_UHS2_HOST_CAPS_GEN_LANE_MASK GENMASK(13, 8) > +#define SDHCI_UHS2_HOST_CAPS_GEN_LANE_SHIFT 8 > +#define SDHCI_UHS2_HOST_CAPS_GEN_2L_HD_FD 1 > +#define SDHCI_UHS2_HOST_CAPS_GEN_2D1U_FD 2 > +#define SDHCI_UHS2_HOST_CAPS_GEN_1D2U_FD 4 > +#define SDHCI_UHS2_HOST_CAPS_GEN_2D2U_FD 8 > +#define SDHCI_UHS2_HOST_CAPS_GEN_ADDR_64 BIT(14) > +#define SDHCI_UHS2_HOST_CAPS_GEN_BOOT BIT(15) > +#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_MASK GENMASK(17, 16) > +#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_SHIFT 16 > +#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_RMV 0 > +#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_EMB 1 > +#define SDHCI_UHS2_HOST_CAPS_GEN_DEV_TYPE_EMB_RMV 2 > +#define SDHCI_UHS2_HOST_CAPS_GEN_NUM_DEV_MASK GENMASK(21, 18) > +#define SDHCI_UHS2_HOST_CAPS_GEN_NUM_DEV_SHIFT 18 > +#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_MASK GENMASK(23, 22) > +#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_SHIFT 22 > +#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_P2P 0 > +#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_RING 1 > +#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_HUB 2 > +#define SDHCI_UHS2_HOST_CAPS_GEN_BUS_TOPO_HUB_RING 3 > + > +#define SDHCI_UHS2_HOST_CAPS_PHY_OFFSET 4 > +#define SDHCI_UHS2_HOST_CAPS_PHY_REV_MASK GENMASK(5, 0) > +#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_MASK GENMASK(7, 6) > +#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_SHIFT 6 > +#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_A 0 > +#define SDHCI_UHS2_HOST_CAPS_PHY_RANGE_B 1 > +#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN_MASK GENMASK(19, 16) > +#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_SYN_SHIFT 16 > +#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR_MASK GENMASK(23, 20) > +#define SDHCI_UHS2_HOST_CAPS_PHY_N_LSS_DIR_SHIFT 20 > +#define SDHCI_UHS2_HOST_CAPS_TRAN_OFFSET 8 > +#define SDHCI_UHS2_HOST_CAPS_TRAN_LINK_REV_MASK GENMASK(5, 0) > +#define SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU_MASK GENMASK(15, 8) > +#define SDHCI_UHS2_HOST_CAPS_TRAN_N_FCU_SHIFT 8 > +#define SDHCI_UHS2_HOST_CAPS_TRAN_HOST_TYPE_MASK GENMASK(18, 16) > +#define SDHCI_UHS2_HOST_CAPS_TRAN_HOST_TYPE_SHIFT 16 > +#define SDHCI_UHS2_HOST_CAPS_TRAN_BLK_LEN_MASK GENMASK(31, 20) > +#define SDHCI_UHS2_HOST_CAPS_TRAN_BLK_LEN_SHIFT 20 > + > +#define SDHCI_UHS2_HOST_CAPS_TRAN_1_OFFSET 12 > +#define SDHCI_UHS2_HOST_CAPS_TRAN_1_N_DATA_GAP_MASK GENMASK(7, 0) > + > +#define SDHCI_UHS2_TEST_PTR 0xE4 > +#define SDHCI_UHS2_TEST_ERR_HEADER BIT(0) > +#define SDHCI_UHS2_TEST_ERR_RES BIT(1) > +#define SDHCI_UHS2_TEST_ERR_RETRY_EXP BIT(2) > +#define SDHCI_UHS2_TEST_ERR_CRC BIT(3) > +#define SDHCI_UHS2_TEST_ERR_FRAME BIT(4) > +#define SDHCI_UHS2_TEST_ERR_TID BIT(5) > +#define SDHCI_UHS2_TEST_ERR_UNRECOVER BIT(7) > +#define SDHCI_UHS2_TEST_ERR_EBUSY BIT(8) > +#define SDHCI_UHS2_TEST_ERR_ADMA BIT(15) > +#define SDHCI_UHS2_TEST_ERR_RES_TIMEOUT BIT(16) > +#define SDHCI_UHS2_TEST_ERR_DEADLOCK_TIMEOUT BIT(17) > +#define SDHCI_UHS2_TEST_ERR_VENDOR BIT(27) The Test register has the same bit fields as the interrupt registers, so we don't really need them do we? > + > +#define SDHCI_UHS2_EMBED_CTRL 0xE6 > +#define SDHCI_UHS2_VENDOR 0xE8 For pointer registers like above 2, let's always name them *_PTR > + > +#endif /* __SDHCI_UHS2_H */ > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h > index d750c464bd1e..bbed850241d4 100644 > --- a/drivers/mmc/host/sdhci.h > +++ b/drivers/mmc/host/sdhci.h > @@ -43,8 +43,27 @@ > #define SDHCI_TRNS_READ 0x10 > #define SDHCI_TRNS_MULTI 0x20 > > +/* > + * Defined in Host Version 4.10. Spec says version 4.0 not version 4.1 > + * 1 - R5 (SDIO) > + * 0 - R1 (Memory) Without reading the spec, it is not obvious what the above means, so please just remove it. > + */ > +#define SDHCI_TRNS_RES_TYPE 0x40 > +#define SDHCI_TRNS_RES_ERR_CHECK 0x80 > +#define SDHCI_TRNS_RES_INT_DIS 0x0100 > + > #define SDHCI_COMMAND 0x0E > #define SDHCI_CMD_RESP_MASK 0x03 > + > +/* > + * Host Version 4.10 adds this bit to distinguish a main command or > + * sub command. > + * CMD53(SDIO) - main command > + * CMD52(SDIO) - sub command which doesn't have data block or doesn't > + * indicate busy. This isn't very clear. How about just this instead: For example with SDIO, CMD52 (sub command) issued during CMD53 (main command) > + */ > +#define SDHCI_CMD_SUB_CMD 0x04 > + > #define SDHCI_CMD_CRC 0x08 > #define SDHCI_CMD_INDEX 0x10 > #define SDHCI_CMD_DATA 0x20 > @@ -60,11 +79,19 @@ > > #define SDHCI_RESPONSE 0x10 > > +#define SDHCI_RESPONSE_CM_TRAN_ABORT_OFFSET 0x10 > +#define SDHCI_RESPONSE_CM_TRAN_ABORT_SIZE 4 > +#define SDHCI_RESPONSE_SD_TRAN_ABORT_OFFSET 0x18 > +#define SDHCI_RESPONSE_SD_TRAN_ABORT_SIZE 8 These are UHS2 registers, so I would expect them in sdhci-uhs2.h. We don't put register sizes, and for 8-byte registers we add "_1" for the upper 4-bytes. i.e. #define SDHCI_UHS2_CM_TRAN_RESP 0x10 #define SDHCI_UHS2_SD_TRAN_RESP 0x18 #define SDHCI_UHS2_SD_TRAN_RESP_1 0x1C > + > #define SDHCI_BUFFER 0x20 > > #define SDHCI_PRESENT_STATE 0x24 > #define SDHCI_CMD_INHIBIT 0x00000001 > #define SDHCI_DATA_INHIBIT 0x00000002 > + > +#define SDHCI_DATA_HIGH_LVL_MASK 0x000000F0 "HIGH" is not that clear. Instead, what about: SDHCI_DAT_4_TO_7_LVL_MASK > + > #define SDHCI_DOING_WRITE 0x00000100 > #define SDHCI_DOING_READ 0x00000200 > #define SDHCI_SPACE_AVAILABLE 0x00000400 > @@ -80,6 +107,13 @@ > #define SDHCI_DATA_0_LVL_MASK 0x00100000 > #define SDHCI_CMD_LVL 0x01000000 > /* Host Version 4.10 */ > +#define SDHCI_HOST_REGULATOR_STABLE 0x02000000 > +#define SDHCI_CMD_NOT_ISSUE_ERR 0x08000000 Please change: ISSUE -> ISSUED > +#define SDHCI_SUB_CMD_STATUS 0x10000000 > +#define SDHCI_UHS2_IN_DORMANT_STATE 0x20000000 > +#define SDHCI_UHS2_LANE_SYNC 0x40000000 > +#define SDHCI_UHS2_IF_DETECT 0x80000000 > + > #define SDHCI_HOST_CONTROL 0x28 > #define SDHCI_CTRL_LED 0x01 > #define SDHCI_CTRL_4BITBUS 0x02 > @@ -100,6 +134,11 @@ > #define SDHCI_POWER_300 0x0C > #define SDHCI_POWER_330 0x0E > > +/* VDD2 - UHS2 */ Please be more explicit here: /* VDD2 power on/off and voltage select (UHS2) */ > +#define SDHCI_VDD2_POWER_ON 0x10 > +#define SDHCI_VDD2_POWER_180 0xA0 > +#define SDHCI_VDD2_POWER_120 0x80 Last 3 values could be lined up with further above. > + > #define SDHCI_BLOCK_GAP_CONTROL 0x2A > > #define SDHCI_WAKE_UP_CONTROL 0x2B > @@ -110,7 +149,7 @@ > #define SDHCI_CLOCK_CONTROL 0x2C > #define SDHCI_DIVIDER_SHIFT 8 > #define SDHCI_DIVIDER_HI_SHIFT 6 > -#define SDHCI_DIV_MASK 0xFF > +#define SDHCI_DIV_MASK 0xFF > #define SDHCI_DIV_MASK_LEN 8 > #define SDHCI_DIV_HI_MASK 0x300 > #define SDHCI_PROG_CLOCK_MODE 0x0020 > @@ -139,6 +178,10 @@ > #define SDHCI_INT_CARD_REMOVE 0x00000080 > #define SDHCI_INT_CARD_INT 0x00000100 > #define SDHCI_INT_RETUNE 0x00001000 > + > +/* Host Version 4.10 */ > +#define SDHCI_INT_FX_EVENT 0x00002000 > + > #define SDHCI_INT_CQE 0x00004000 > #define SDHCI_INT_ERROR 0x00008000 > #define SDHCI_INT_TIMEOUT 0x00010000 > @@ -152,6 +195,9 @@ > #define SDHCI_INT_AUTO_CMD_ERR 0x01000000 > #define SDHCI_INT_ADMA_ERROR 0x02000000 > > +/* Host Version 4.0 */ > +#define SDHCI_INT_RESPONSE_ERROR 0x08000000 Could be shorter: SDHCI_INT_RESPONSE_ERROR -> SDHCI_INT_RESP_ERR > + > #define SDHCI_INT_NORMAL_MASK 0x00007FFF > #define SDHCI_INT_ERROR_MASK 0xFFFF8000 > > @@ -178,6 +224,9 @@ > #define SDHCI_AUTO_CMD_END_BIT 0x00000008 > #define SDHCI_AUTO_CMD_INDEX 0x00000010 > > +/* Host Version 4.10 */ > +#define SDHCI_ACMD_RESPONSE_ERROR 0x0020 Could be shorter: SDHCI_ACMD_RESPONSE_ERROR -> SDHCI_AUTO_CMD_RESP_ERR > + > #define SDHCI_HOST_CONTROL2 0x3E > #define SDHCI_CTRL_UHS_MASK 0x0007 > #define SDHCI_CTRL_UHS_SDR12 0x0000 > @@ -186,6 +235,7 @@ > #define SDHCI_CTRL_UHS_SDR104 0x0003 > #define SDHCI_CTRL_UHS_DDR50 0x0004 > #define SDHCI_CTRL_HS400 0x0005 /* Non-standard */ > +#define SDHCI_CTRL_UHS_2 0x0007 /* UHS-2 */ We are using UHS2 in other places, so do it here too: SDHCI_CTRL_UHS_2 -> SDHCI_CTRL_UHS2 Also the comment /* UHS-2 */ is not needed > #define SDHCI_CTRL_VDD_180 0x0008 > #define SDHCI_CTRL_DRV_TYPE_MASK 0x0030 > #define SDHCI_CTRL_DRV_TYPE_B 0x0000 > @@ -194,9 +244,12 @@ > #define SDHCI_CTRL_DRV_TYPE_D 0x0030 > #define SDHCI_CTRL_EXEC_TUNING 0x0040 > #define SDHCI_CTRL_TUNED_CLK 0x0080 > +#define SDHCI_CTRL_UHS2_INTERFACE_EN 0x0100 /* UHS-2 */ Already have "SDHCI_CTRL_PRESET_VAL_ENABLE" so let's spell out ENABLE here too. SDHCI_CTRL_UHS2_INTERFACE_EN -> SDHCI_CTRL_UHS2_ENABLE Also the comment /* UHS-2 */ is not needed > +#define SDHCI_CTRL_ADMA2_LEN_MODE 0x0400 > #define SDHCI_CMD23_ENABLE 0x0800 > #define SDHCI_CTRL_V4_MODE 0x1000 > #define SDHCI_CTRL_64BIT_ADDR 0x2000 > +#define SDHCI_CTRL_ASYNC_INT_EN 0x4000 Ditto SDHCI_CTRL_ASYNC_INT_EN -> SDHCI_CTRL_ASYNC_INT_ENABLE > #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000 > > #define SDHCI_CAPABILITIES 0x40 > @@ -219,11 +272,13 @@ > #define SDHCI_CAN_VDD_180 0x04000000 > #define SDHCI_CAN_64BIT_V4 0x08000000 > #define SDHCI_CAN_64BIT 0x10000000 > +#define SDHCI_CAN_ASYNC_INT 0x20000000 > > #define SDHCI_CAPABILITIES_1 0x44 > #define SDHCI_SUPPORT_SDR50 0x00000001 > #define SDHCI_SUPPORT_SDR104 0x00000002 > #define SDHCI_SUPPORT_DDR50 0x00000004 > +#define SDHCI_SUPPORT_UHS2 0x00000008 /* UHS-2 support */ Please remove the comment - the name says it all. > #define SDHCI_DRIVER_TYPE_A 0x00000010 > #define SDHCI_DRIVER_TYPE_C 0x00000020 > #define SDHCI_DRIVER_TYPE_D 0x00000040 > @@ -232,19 +287,28 @@ > #define SDHCI_RETUNING_MODE_MASK GENMASK(15, 14) > #define SDHCI_CLOCK_MUL_MASK GENMASK(23, 16) > #define SDHCI_CAN_DO_ADMA3 0x08000000 > +#define SDHCI_SUPPORT_VDD2_180 0x10000000 /* UHS-2 1.8V VDD2 */ Better to be like VDD bit names i.e. SDHCI_SUPPORT_VDD2_180 -> SDHCI_CAN_VDD2_180 > +#define SDHCI_RSVD_FOR_VDD2 0x20000000 /* Rsvd for future VDD2 */ Please drop SDHCI_RSVD_FOR_VDD2 > #define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */ > > #define SDHCI_MAX_CURRENT 0x48 > +#define SDHCI_MAX_CURRENT_1 0x4C Let's put SDHCI_MAX_CURRENT_1 just above SDHCI_MAX_CURRENT_VDD2_180_MASK > #define SDHCI_MAX_CURRENT_LIMIT GENMASK(7, 0) > #define SDHCI_MAX_CURRENT_330_MASK GENMASK(7, 0) > #define SDHCI_MAX_CURRENT_300_MASK GENMASK(15, 8) > #define SDHCI_MAX_CURRENT_180_MASK GENMASK(23, 16) > +#define SDHCI_MAX_CURRENT_VDD2_180_MASK GENMASK(7, 0) /* UHS2 */ > #define SDHCI_MAX_CURRENT_MULTIPLIER 4 > > /* 4C-4F reserved for more max current */ > > #define SDHCI_SET_ACMD12_ERROR 0x50 > +/* Host Version 4.10 */ > +#define SDHCI_SET_ACMD_RESPONSE_ERROR 0x20 This isn't being used is it? Then let's leave it out. > #define SDHCI_SET_INT_ERROR 0x52 > +/* Host Version 4.10 */ > +#define SDHCI_SET_INT_TUNING_ERROR 0x0400 > +#define SDHCI_SET_INT_RESPONSE_ERROR 0x0800 These aren't being used are they? Then let's leave them out. > > #define SDHCI_ADMA_ERROR 0x54 > > @@ -262,10 +326,16 @@ > #define SDHCI_PRESET_FOR_SDR104 0x6C > #define SDHCI_PRESET_FOR_DDR50 0x6E > #define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */ > + > +/* TODO: 0x74 is used for UHS2 in 4.10. How about HS400? */ > +/* UHS2 */ A host controller cannot be using it for both at the same time. The drivers should be able to sort it out if needed. For now, just remove your comments. > +#define SDHCI_PRESET_FOR_UHS2 0x74 > #define SDHCI_PRESET_DRV_MASK GENMASK(15, 14) > #define SDHCI_PRESET_CLKGEN_SEL BIT(10) > #define SDHCI_PRESET_SDCLK_FREQ_MASK GENMASK(9, 0) > > +#define SDHCI_ADMA3_ADDRESS 0x78 > + > #define SDHCI_SLOT_INT_STATUS 0xFC > > #define SDHCI_HOST_VERSION 0xFE > @@ -659,6 +729,7 @@ struct sdhci_ops { > void (*request_done)(struct sdhci_host *host, > struct mmc_request *mrq); > void (*dump_vendor_regs)(struct sdhci_host *host); > + void (*dump_uhs2_regs)(struct sdhci_host *host); Please move this to patch "mmc: sdhci-uhs2: dump UHS-II registers" > }; > > #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS