[PATCH 4.9 000/177] 4.9.90-stable review

[PATCH 4.9 000/177] 4.9.90-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.90 release.
There are 177 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Mar 25 09:41:28 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.90-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.90-rc1

Krzysztof Opasiak <kopasiak90@gmail.com>
    usb: gadget: f_hid: fix: Move IN request allocation to set_alt()

Leon Romanovsky <leonro@mellanox.com>
    RDMA/ucma: Don't allow join attempts for unsupported AF family

Leon Romanovsky <leonro@mellanox.com>
    RDMA/ucma: Fix access to non-initialized CM_ID object

Jerome Brunet <jbrunet@baylibre.com>
    clk: migrate the count of orphaned clocks at init

Boris Pismenny <borisp@mellanox.com>
    IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq

Boris Pismenny <borisp@mellanox.com>
    IB/mlx5: Fix integer overflows in mlx5_ib_create_srq

Vignesh R <vigneshr@ti.com>
    dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63

Sergej Sawazki <sergej@taudac.com>
    clk: si5351: Rename internal plls to avoid name collisions

Lars-Peter Clausen <lars@metafoo.de>
    clk: axi-clkgen: Correctly handle nocount bit in recalc_rate()

Stephen Boyd <sboyd@codeaurora.org>
    clk: Don't touch hardware when reparenting during registration

Benjamin Coddington <bcodding@redhat.com>
    nfsd4: permit layoutget of executable-only files

Joel Stanley <joel@jms.id.au>
    ARM: dts: aspeed-evb: Add unit name to memory node

Anton Vasilyev <vasilyev@ispras.ru>
    RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS

Alexey Kodanev <alexey.kodanev@oracle.com>
    ip6_vti: adjust vti mtu according to mtu of lower device

Jerry Snitselaar <jsnitsel@redhat.com>
    iommu/vt-d: clean up pr_irq if request_threaded_irq fails

Brian Norris <briannorris@chromium.org>
    pinctrl: rockchip: enable clock when reading pin direction register

Florian Fainelli <f.fainelli@gmail.com>
    pinctrl: Really force states during suspend/resume

Robert Walker <robert.walker@arm.com>
    coresight: Fix disabling of CoreSight TPIU

Sahara <keun-o.park@darkmatter.ae>
    pty: cancel pty slave port buf's work in tty_release

Peter Ujfalusi <peter.ujfalusi@ti.com>
    drm/omap: DMM: Check for DMM readiness after successful transaction commit

H. Nikolaus Schaller <hns@goldelico.com>
    omapdrm: panel: fix compatible vendor string for td028ttec1

Bjorn Helgaas <bhelgaas@google.com>
    vgacon: Set VGA struct resource types

Bharat Potnuri <bharat@chelsio.com>
    iser-target: avoid reinitializing rdma contexts for isert commands

Artemy Kovalyov <artemyko@mellanox.com>
    IB/umem: Fix use of npages/nmap fields

Parav Pandit <parav@mellanox.com>
    RDMA/cma: Use correct size when writing netlink stats

Erez Shitrit <erezsh@mellanox.com>
    IB/ipoib: Avoid memory leak if the SA returns a different DGID

Alexandre Belloni <alexandre.belloni@free-electrons.com>
    rtc: ac100: Fix multiple race conditions

Daniel Drake <drake@endlessm.com>
    mmc: avoid removing non-removable hosts during suspend

Logan Gunthorpe <logang@deltatee.com>
    drm/tilcdc: ensure nonatomic iowrite64 is not used

Kedareswara rao Appana <appana.durga.rao@xilinx.com>
    dmaengine: zynqmp_dma: Fix race condition in the probe

Shawn Nematbakhsh <shawnn@chromium.org>
    platform/chrome: Use proper protocol transfer function

Guenter Roeck <linux@roeck-us.net>
    watchdog: Fix potential kref imbalance when opening watchdog

Arnd Bergmann <arnd@arndb.de>
    cros_ec: fix nul-termination for firmware build info

Stefan Potyra <Stefan.Potyra@elektrobit.com>
    serial: 8250_dw: Disable clock on error

Bjørn Mork <bjorn@mork.no>
    qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect

Ron Economos <w6rz@comcast.net>
    media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart

Balaji Pothunoori <bpothuno@qti.qualcomm.com>
    ath10k: handling qos at STA side based on AP WMM enable/disable

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    media: bt8xx: Fix err 'bt878_probe()'

Tsang-Shian Lin <thlin@realtek.com>
    rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled.

Geert Uytterhoeven <geert@linux-m68k.org>
    RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo()

Prakash Kamliya <pkamliya@codeaurora.org>
    drm/msm: fix leak in failed get_pages

Gustavo A. R. Silva <garsilva@embeddedor.com>
    media: c8sectpfe: fix potential NULL pointer dereference in c8sectpfe_timer_interrupt

Loic Poulain <loic.poulain@linaro.org>
    Bluetooth: btqcomsmd: Fix skb double free corruption

Loic Poulain <loic.poulain@linaro.org>
    Bluetooth: hci_qca: Avoid setup failure on missing rampatch

Peter Zijlstra <peterz@infradead.org>
    block/mq: Cure cpu hotplug lock inversion

Kim Phillips <kim.phillips@arm.com>
    perf tests kmod-path: Don't fail if compressed modules aren't supported

Michael Mera <dev@michaelmera.com>
    ath10k: fix out of bounds access to local buffer

Moritz Fischer <mdf@kernel.org>
    rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL

Moritz Fischer <mdf@kernel.org>
    rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks

Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
    mm: hwpoison: call shake_page() after try_to_unmap() for mlocked page

David Rientjes <rientjes@google.com>
    mm, vmstat: suppress pcp stats for unpopulated zones in zoneinfo

Johannes Weiner <hannes@cmpxchg.org>
    mm: fix check for reclaimable pages in PF_MEMALLOC reclaim throttling

Dan Carpenter <dan.carpenter@oracle.com>
    cifs: small underflow in cnvrtDosUnixTm()

Timmy Li <lixiaoping3@huawei.com>
    net: hns: fix ethtool_get_strings overflow in hns driver

Trond Myklebust <trond.myklebust@primarydata.com>
    pNFS: Fix a deadlock when coalescing writes and returning the layout

Alexey Khoroshilov <khoroshilov@ispras.ru>
    sm501fb: don't return zero on failure path in sm501fb_start()

Maksim Salau <maksim.salau@gmail.com>
    video: fbdev: udlfb: Fix buffer on stack

Vitaly Kuznetsov <vkuznets@redhat.com>
    x86/xen: split xen_smp_prepare_boot_cpu()

Dmitry Monakhov <dmonakhov@openvz.org>
    tcm_fileio: Prevent information leak for short reads

Sergei Trofimovich <slyfox@gentoo.org>
    ia64: fix module loading for gcc-5.4

Hans de Goede <hdegoede@redhat.com>
    ACPI / power: Delay turning off unused power resources after suspend

Shaohua Li <shli@fb.com>
    md/raid10: skip spare disk as 'first' disk

Johannes Thumshirn <jthumshirn@suse.de>
    IB/rxe: Don't clamp residual length to mtu

Sebastian Reichel <sebastian.reichel@collabora.co.uk>
    Input: twl4030-pwrbutton - use correct device for irq request

Michael Trimarchi <michael@amarulasolutions.com>
    power: supply: pda_power: move from timer to delayed_work

Pan Bian <bianpan2016@163.com>
    power: supply: isp1704: Fix unchecked return value of devm_kzalloc

Hans de Goede <hdegoede@redhat.com>
    power: supply: bq24190_charger: Add disable-reset device-property

Scott Wood <swood@redhat.com>
    bnx2x: Align RX buffers

Dan Carpenter <dan.carpenter@oracle.com>
    qed: Unlock on error in qed_vf_pf_acquire()

Jiri Benc <jbenc@redhat.com>
    vxlan: correctly handle ipv6.disable module parameter

Dean Jenkins <Dean_Jenkins@mentor.com>
    Bluetooth: hci_ldisc: Add protocol check to hci_uart_tx_wakeup()

Dean Jenkins <Dean_Jenkins@mentor.com>
    Bluetooth: hci_ldisc: Add protocol check to hci_uart_dequeue()

Valentin Longchamp <valentin.longchamp@keymile.com>
    soc/fsl/qe: round brg_freq to 1kHz granularity

Christophe Leroy <christophe.leroy@c-s.fr>
    net: ethernet: ucc_geth: fix MEM_PART_MURAM mode

Emil Tantilov <emil.s.tantilov@intel.com>
    ixgbevf: fix size of queue stats length

Jan Kara <jack@suse.cz>
    jbd2: Fix lockdep splat with generic/270 test

Mario Kleiner <mario.kleiner.de@gmail.com>
    drm/nouveau/kms: Increase max retries in scanout position queries.

Chunming Zhou <David1.Zhou@amd.com>
    drm/amdgpu: fix gpu reset crash

Hans de Goede <hdegoede@redhat.com>
    ACPI / PMIC: xpower: Fix power_table addresses

Robert Lippert <roblip@gmail.com>
    ipmi/watchdog: fix wdog hang on panic waiting for ipmi response

Oleksij Rempel <linux@rempel-privat.de>
    platform/x86: asus-wmi: try to set als by default

Tadeusz Struk <tadeusz.struk@intel.com>
    IB/hfi1: Fix softlockup issue

Dan Carpenter <dan.carpenter@oracle.com>
    IB/rdmavt: restore IRQs on error path in rvt_create_ah()

Kishon Vijay Abraham I <kishon@ti.com>
    ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP

Dan Carpenter <dan.carpenter@oracle.com>
    netfilter: x_tables: unlock on error in xt_find_table_lock()

yangbo lu <yangbo.lu@nxp.com>
    mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a

Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
    mac80211: Fix possible sband related NULL pointer de-reference

Paolo Abeni <pabeni@redhat.com>
    ipvs: explicitly forbid ipv6 service/dest creation if ipv6 mod is disabled

Pan Bian <bianpan2016@163.com>
    staging: wilc1000: fix unchecked return value

Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
    staging: unisys: visorhba: fix s-Par to boot with option CONFIG_VMAP_STACK set to y

Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
    gpio: gpio-wcove: fix GPIO IRQ status mask

Baoquan He <bhe@redhat.com>
    x86/KASLR: Fix kexec kernel boot crash when KASLR randomization fails

Ming Lei <ming.lei@redhat.com>
    mtip32xx: use runtime tag to initialize command header

Keerthy <j-keerthy@ti.com>
    mfd: palmas: Reset the POWERHOLD mux during power off

Rask Ingemann Lambertsen <rask@formelder.dk>
    dt-bindings: mfd: axp20x: Add "xpowers,master-mode" property for AXP806 PMICs

Colin Ian King <colin.king@canonical.com>
    iio: hid-sensor: fix return of -EINVAL on invalid values in ret or value

Lv Zheng <lv.zheng@intel.com>
    ACPICA: iasl: Fix IORT SMMU GSI disassembling

Emmanuel Grumbach <emmanuel.grumbach@intel.com>
    mac80211: don't parse encrypted management frames in ieee80211_frame_acked

Martin Brandenburg <martin@omnibond.com>
    orangefs: do not wait for timeout if umounting

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix extent map leak during fallocate error path

Filipe Manana <fdmanana@suse.com>
    Btrfs: send, fix file hole not being preserved due to inline extent

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix incorrect space accounting after failure to insert inline extent

Pan Bian <bianpan2016@163.com>
    rndis_wlan: add return value validation

Pan Bian <bianpan2016@163.com>
    libertas: check return value of alloc_workqueue

Pan Bian <bianpan2016@163.com>
    mt7601u: check return value of alloc_skb

Shrirang Bagul <shrirang.bagul@canonical.com>
    iio: st_pressure: st_accel: Initialise sensor platform data properly

NeilBrown <neilb@suse.com>
    NFS: don't try to cross a mountpount when there isn't one there.

Chuck Lever <chuck.lever@oracle.com>
    xprtrdma: Cancel refresh worker during buffer shutdown

Trond Myklebust <trond.myklebust@primarydata.com>
    pNFS: Fix use after free issues in pnfs_do_read()

Vlad Tsyrklevich <vlad@tsyrklevich.net>
    infiniband/uverbs: Fix integer overflows

Finn Thain <fthain@telegraphics.com.au>
    scsi: mac_esp: Replace bogus memory barrier with spinlock

Maarten Maathuis <madman2003@gmail.com>
    platform/x86: intel-vbtn: add volume up and down

Liping Zhang <zlpnobody@gmail.com>
    netfilter: nft_dynset: continue to next expr if _OP_ADD succeeded

Pan Bian <bianpan2016@163.com>
    qlcnic: fix unchecked return value

Pan Bian <bianpan2016@163.com>
    wan: pc300too: abort path on failure

Pan Bian <bianpan2016@163.com>
    tipc: check return value of nlmsg_new

Dan Carpenter <dan.carpenter@oracle.com>
    mmc: host: omap_hsmmc: checking for NULL instead of IS_ERR()

Liping Zhang <zlpnobody@gmail.com>
    netfilter: nf_ct_helper: permit cthelpers with different names via nfnetlink

Jarno Rajahalme <jarno@ovn.org>
    openvswitch: Delete conntrack entry clashing with an expectation.

Gao Feng <fgao@ikuai8.com>
    netfilter: xt_CT: fix refcnt leak on error path

Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
    gpio: gpio-wcove: fix irq pending status bit width

James Smart <jsmart2021@gmail.com>
    Fix Express lane queue creation.

James Smart <jsmart2021@gmail.com>
    Fix driver usage of 128B WQEs when WQ_CREATE is V1.

K. Y. Srinivasan <kys@microsoft.com>
    netvsc: Deal with rescinded channels correctly

Brian King <brking@linux.vnet.ibm.com>
    ibmvnic: Disable irq prior to close

Dan Carpenter <dan.carpenter@oracle.com>
    ASoC: Intel: Skylake: Uninitialized variable in probe_codec()

Moni Shoua <monis@mellanox.com>
    IB/mlx5: Set correct SL in completion for RoCE

Maor Gottlieb <maorg@mellanox.com>
    IB/mlx5: Change vma from shared to private

Maor Gottlieb <maorg@mellanox.com>
    IB/mlx5: Take write semaphore when changing the vma struct

Maor Gottlieb <maorg@mellanox.com>
    IB/mlx4: Change vma from shared to private

Maor Gottlieb <maorg@mellanox.com>
    IB/mlx4: Take write semaphore when changing the vma struct

Dan Carpenter <dan.carpenter@oracle.com>
    HSI: ssi_protocol: double free in ssip_pn_xmit()

Feras Daoud <ferasda@mellanox.com>
    IB/ipoib: Update broadcast object if PKey value was changed in index 0

Feras Daoud <ferasda@mellanox.com>
    IB/ipoib: Fix deadlock between ipoib_stop and mcast join flow

Mikhail Paulyshka <me@mixaill.tk>
    ALSA: hda - Fix headset microphone detection for ASUS N551 and N751

Bernd Faust <berndfaust@gmail.com>
    e1000e: fix timing for 82579 Gigabit Ethernet controller

Eric Dumazet <edumazet@google.com>
    tcp: remove poll() flakes with FastOpen

Benjamin Coddington <bcodding@redhat.com>
    NFS: Fix missing pg_cleanup after nfs_pageio_cond_complete()

Guoqing Jiang <gqjiang@suse.com>
    md/raid10: wait up frozen array in handle_write_completed

Suman Anna <s-anna@ti.com>
    iommu/omap: Register driver before setting IOMMU ops

Paul Burton <paul.burton@imgtec.com>
    irqchip/mips-gic: Separate IPI reservation & usage tracking

Abel Vesa <abelvesa@linux.com>
    ARM: 8668/1: ftrace: Fix dynamic ftrace with DEBUG_RODATA and !FRAME_POINTER

Tiantian Feng <fengtiantian@huawei.com>
    x86/reboot: Turn off KVM when halting a CPU

Brian Norris <briannorris@chromium.org>
    mwifiex: don't leak 'chan_stats' on reset

Alexey Kardashevskiy <aik@ozlabs.ru>
    KVM: PPC: Book3S PR: Exit KVM on failed mapping

David Gibson <david@gibson.dropbear.id.au>
    scsi: virtio_scsi: Always try to read VPD pages

Liad Kaufman <liad.kaufman@intel.com>
    iwlwifi: a000: fix memory offsets and lengths

Emmanuel Grumbach <emmanuel.grumbach@intel.com>
    iwlwifi: split the handler and the wake parts of the notification infra

Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
    clk: ns2: Correct SDIO bits

Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
    ath: Fix updating radar flags for coutry code India

Nicholas Piggin <npiggin@gmail.com>
    powerpc/64s: Remove SAO feature from Power9 DD1

Marek Vasut <marex@denx.de>
    spi: dw: Disable clock after unregistering the host

Dan Williams <dan.j.williams@intel.com>
    tools/testing/nvdimm: fix nfit_test shutdown crash

Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
    ASoC: Intel: Atom: update Thinkpad 10 quirk

Adam Borowski <kilobyte@angband.pl>
    btrfs: fix a bogus warning when converting only data or metadata

Jasmin J <jasmin@anw.at>
    media/dvb-core: Race condition when writing to CAM

David Ahern <dsa@cumulusnetworks.com>
    net: ipv6: send unsolicited NA on admin up

Edgar Cherkasov <echerkasov@dev.rtsoft.ru>
    i2c: i2c-scmi: add a MS HID

Hans de Goede <hdegoede@redhat.com>
    genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs

Thomas Gleixner <tglx@linutronix.de>
    cpufreq/sh: Replace racy task affinity logic

Thomas Gleixner <tglx@linutronix.de>
    ACPI/processor: Replace racy task affinity logic

Thomas Gleixner <tglx@linutronix.de>
    ACPI/processor: Fix error handling in __acpi_processor_start()

Deepa Dinamani <deepa.kernel@gmail.com>
    time: Change posix clocks ops interfaces to use timespec64

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    Input: ar1021_i2c - fix too long name in driver's device table

Hans de Goede <hdegoede@redhat.com>
    rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs

Hans de Goede <hdegoede@redhat.com>
    x86: i8259: export legacy_pic symbol

Liam Breck <kernel@networkimprov.net>
    power: supply: bq24190_charger: Limit over/under voltage fault logging

Dong Aisheng <aisheng.dong@nxp.com>
    regulator: anatop: set default voltage selector for pcie

Mahesh Bandewar <maheshb@google.com>
    bonding: handle link transition from FAIL to UP correctly

Santeri Toivonen <santeri.toivonen@vatsul.com>
    platform/x86: asus-nb-wmi: Add wapf4 quirk for the X302UA

Jacek Anaszewski <jacek.anaszewski@gmail.com>
    led: core: Clear LED_BLINK_SW flag in led_blink_set()

Jacek Anaszewski <jacek.anaszewski@gmail.com>
    Revert "led: core: Fix brightness setting when setting delay_off=0"

Yisheng Xie <xieyisheng1@huawei.com>
    staging: android: ashmem: Fix possible deadlock in ashmem_ioctl

Pavel Shilovsky <pshilov@microsoft.com>
    CIFS: Enable encryption during session setup phase

Steve French <smfrench@gmail.com>
    SMB3: Validate negotiate request must always be signed

Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
    ASoC: rsnd: check src mod pointer for rsnd_mod_id()

Jeremy Boone <jeremy.boone@nccgroup.trust>
    tpm: fix potential buffer overruns caused by bit glitches on the bus


-------------

Diffstat:

 .../{toppoly,td028ttec1.txt => tpo,td028ttec1.txt} |  4 +-
 Documentation/devicetree/bindings/mfd/axp20x.txt   |  3 +
 Makefile                                           |  4 +-
 arch/alpha/kernel/console.c                        |  1 +
 arch/arm/boot/dts/aspeed-ast2500-evb.dts           |  2 +-
 arch/arm/kernel/ftrace.c                           | 11 +--
 arch/arm/mach-omap2/clockdomains7xx_data.c         |  2 +-
 arch/ia64/kernel/module.c                          |  4 +-
 arch/powerpc/include/asm/cputable.h                |  3 +-
 arch/powerpc/kvm/book3s_64_mmu_host.c              |  5 +-
 arch/powerpc/kvm/book3s_pr.c                       |  6 +-
 arch/x86/boot/compressed/kaslr.c                   | 11 ++-
 arch/x86/kernel/i8259.c                            |  1 +
 arch/x86/kernel/smp.c                              |  3 +
 arch/x86/xen/smp.c                                 | 49 +++++++-----
 block/blk-mq.c                                     |  4 +-
 drivers/acpi/pmic/intel_pmic_xpower.c              | 50 ++++++------
 drivers/acpi/power.c                               | 10 +++
 drivers/acpi/processor_driver.c                    | 10 ++-
 drivers/acpi/processor_throttling.c                | 62 ++++++++-------
 drivers/acpi/sleep.c                               |  1 +
 drivers/acpi/sleep.h                               |  1 +
 drivers/block/mtip32xx/mtip32xx.c                  | 36 ++++++---
 drivers/bluetooth/btqcomsmd.c                      |  3 +-
 drivers/bluetooth/hci_ldisc.c                      | 11 ++-
 drivers/bluetooth/hci_qca.c                        |  3 +
 drivers/char/ipmi/ipmi_watchdog.c                  |  8 +-
 drivers/char/tpm/tpm-interface.c                   |  5 ++
 drivers/char/tpm/tpm2-cmd.c                        |  6 ++
 drivers/clk/bcm/clk-ns2.c                          |  2 +-
 drivers/clk/clk-axi-clkgen.c                       | 29 +++++--
 drivers/clk/clk-si5351.c                           |  2 +-
 drivers/clk/clk.c                                  | 32 +++++---
 drivers/cpufreq/sh-cpufreq.c                       | 45 ++++++-----
 drivers/dma/ti-dma-crossbar.c                      | 10 ++-
 drivers/dma/xilinx/zynqmp_dma.c                    |  3 +-
 drivers/gpio/gpio-wcove.c                          |  8 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c         |  7 +-
 drivers/gpu/drm/msm/msm_gem.c                      | 14 +++-
 drivers/gpu/drm/nouveau/nouveau_display.c          |  2 +-
 .../drm/omapdrm/displays/panel-tpo-td028ttec1.c    |  3 +
 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c           |  5 ++
 drivers/gpu/drm/tilcdc/tilcdc_regs.h               |  2 +-
 drivers/hsi/clients/ssi_protocol.c                 |  5 +-
 drivers/hwtracing/coresight/coresight-tpiu.c       | 13 +++-
 drivers/i2c/busses/i2c-scmi.c                      |  4 +
 drivers/iio/accel/st_accel_core.c                  |  7 +-
 .../iio/common/hid-sensors/hid-sensor-attributes.c |  4 +-
 drivers/iio/pressure/st_pressure_core.c            |  8 +-
 drivers/infiniband/core/cma.c                      |  5 +-
 drivers/infiniband/core/iwpm_util.c                |  1 +
 drivers/infiniband/core/ucma.c                     |  8 +-
 drivers/infiniband/core/umem.c                     |  2 +-
 drivers/infiniband/core/uverbs_cmd.c               | 13 +++-
 drivers/infiniband/hw/hfi1/chip.c                  | 86 ++++++++++++---------
 drivers/infiniband/hw/hfi1/hfi.h                   |  7 +-
 drivers/infiniband/hw/hfi1/init.c                  |  2 +-
 drivers/infiniband/hw/mlx4/main.c                  |  6 +-
 drivers/infiniband/hw/mlx5/cq.c                    | 19 ++++-
 drivers/infiniband/hw/mlx5/main.c                  |  5 +-
 drivers/infiniband/hw/mlx5/qp.c                    | 24 ++++--
 drivers/infiniband/hw/mlx5/srq.c                   | 15 ++--
 drivers/infiniband/hw/ocrdma/ocrdma_stats.c        |  2 +-
 drivers/infiniband/sw/rdmavt/ah.c                  |  2 +-
 drivers/infiniband/sw/rxe/rxe_resp.c               |  2 -
 drivers/infiniband/ulp/ipoib/ipoib_ib.c            | 13 ++++
 drivers/infiniband/ulp/ipoib/ipoib_main.c          | 16 ++++
 drivers/infiniband/ulp/ipoib/ipoib_multicast.c     | 11 ++-
 drivers/infiniband/ulp/isert/ib_isert.c            |  7 ++
 drivers/infiniband/ulp/isert/ib_isert.h            |  1 +
 drivers/input/misc/twl4030-pwrbutton.c             |  2 +-
 drivers/input/touchscreen/ar1021_i2c.c             |  2 +-
 drivers/iommu/intel-svm.c                          |  9 ++-
 drivers/iommu/omap-iommu.c                         | 21 ++++-
 drivers/irqchip/irq-mips-gic.c                     | 12 +--
 drivers/leds/led-core.c                            |  3 +-
 drivers/md/raid10.c                                |  6 ++
 drivers/media/dvb-core/dvb_ca_en50221.c            | 23 ++++++
 drivers/media/dvb-frontends/si2168.c               |  3 +
 drivers/media/pci/bt8xx/bt878.c                    |  3 +-
 .../media/platform/sti/c8sectpfe/c8sectpfe-core.c  |  4 +-
 drivers/mfd/palmas.c                               | 14 ++++
 drivers/mmc/core/core.c                            |  8 ++
 drivers/mmc/host/omap_hsmmc.c                      |  4 +-
 drivers/mmc/host/sdhci-of-esdhc.c                  | 14 ++++
 drivers/net/bonding/bond_main.c                    |  3 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c    |  1 +
 drivers/net/ethernet/freescale/ucc_geth.c          |  8 +-
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c |  2 +-
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c  |  2 +-
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c  |  2 +-
 .../net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c    |  2 +-
 drivers/net/ethernet/ibm/ibmvnic.c                 | 18 +++++
 drivers/net/ethernet/intel/e1000e/netdev.c         |  6 ++
 drivers/net/ethernet/intel/ixgbevf/ethtool.c       |  2 +-
 drivers/net/ethernet/qlogic/qed/qed_vf.c           |  2 +-
 .../ethernet/qlogic/qlcnic/qlcnic_sriov_common.c   |  2 +
 drivers/net/hyperv/netvsc.c                        | 16 ++++
 drivers/net/usb/qmi_wwan.c                         |  4 +-
 drivers/net/vxlan.c                                | 10 ++-
 drivers/net/wan/pc300too.c                         |  1 +
 drivers/net/wireless/ath/ath10k/debug.c            | 16 ++--
 drivers/net/wireless/ath/ath10k/mac.c              |  2 +-
 drivers/net/wireless/ath/regd.c                    | 19 +++--
 drivers/net/wireless/intel/iwlwifi/iwl-a000.c      |  6 +-
 .../net/wireless/intel/iwlwifi/iwl-notif-wait.c    | 10 +--
 .../net/wireless/intel/iwlwifi/iwl-notif-wait.h    | 25 ++++--
 drivers/net/wireless/marvell/libertas/if_spi.c     |  5 ++
 drivers/net/wireless/marvell/mwifiex/main.c        |  4 +-
 drivers/net/wireless/mediatek/mt7601u/mcu.c        | 10 ++-
 drivers/net/wireless/realtek/rtlwifi/pci.c         |  7 ++
 drivers/net/wireless/rndis_wlan.c                  |  4 +
 drivers/pinctrl/core.c                             | 24 ++++--
 drivers/pinctrl/pinctrl-rockchip.c                 |  8 ++
 drivers/platform/chrome/cros_ec_proto.c            |  8 +-
 drivers/platform/chrome/cros_ec_sysfs.c            |  2 +-
 drivers/platform/x86/asus-nb-wmi.c                 | 22 ++++++
 drivers/platform/x86/asus-wmi.c                    | 12 +++
 drivers/platform/x86/asus-wmi.h                    |  1 +
 drivers/platform/x86/intel-vbtn.c                  |  4 +
 drivers/power/supply/bq24190_charger.c             | 10 ++-
 drivers/power/supply/isp1704_charger.c             |  4 +
 drivers/power/supply/pda_power.c                   | 49 ++++++------
 drivers/ptp/ptp_clock.c                            | 18 ++---
 drivers/regulator/anatop-regulator.c               |  5 ++
 drivers/rtc/rtc-ac100.c                            | 19 +++--
 drivers/rtc/rtc-cmos.c                             | 17 ++++-
 drivers/rtc/rtc-ds1374.c                           | 10 ++-
 drivers/scsi/lpfc/lpfc_init.c                      |  6 +-
 drivers/scsi/lpfc/lpfc_sli.c                       |  3 +
 drivers/scsi/mac_esp.c                             | 33 +++++---
 drivers/scsi/virtio_scsi.c                         | 24 ++++++
 drivers/soc/fsl/qe/qe.c                            | 13 ++++
 drivers/spi/spi-dw-mmio.c                          |  2 +-
 drivers/staging/android/ashmem.c                   |  8 +-
 drivers/staging/unisys/visorhba/visorhba_main.c    |  8 +-
 drivers/staging/wilc1000/linux_mon.c               |  2 +
 drivers/target/target_core_file.c                  | 23 ++++--
 drivers/tty/serial/8250/8250_dw.c                  |  3 +-
 drivers/tty/tty_io.c                               |  2 +
 drivers/usb/gadget/function/f_hid.c                | 89 ++++++++++++++++------
 drivers/video/console/vgacon.c                     | 34 +++++++--
 .../omap2/omapfb/displays/panel-tpo-td028ttec1.c   |  3 +
 drivers/video/fbdev/sm501fb.c                      |  1 +
 drivers/video/fbdev/udlfb.c                        | 14 +++-
 drivers/watchdog/watchdog_dev.c                    |  6 +-
 fs/btrfs/file.c                                    |  4 +-
 fs/btrfs/inode.c                                   |  6 +-
 fs/btrfs/send.c                                    | 23 +++++-
 fs/btrfs/volumes.c                                 | 12 ++-
 fs/cifs/netmisc.c                                  |  6 +-
 fs/cifs/sess.c                                     | 22 +++---
 fs/cifs/smb2pdu.c                                  | 15 ++--
 fs/jbd2/journal.c                                  | 15 +++-
 fs/nfs/pagelist.c                                  |  6 +-
 fs/nfs/pnfs.c                                      | 18 +++--
 fs/nfsd/nfs4proc.c                                 |  6 +-
 fs/nfsd/vfs.c                                      | 24 +++++-
 fs/orangefs/waitqueue.c                            |  9 ++-
 include/acpi/actbl2.h                              |  9 +++
 include/linux/mlx5/driver.h                        |  4 +-
 include/linux/posix-clock.h                        | 10 +--
 include/soc/fsl/qe/qe.h                            |  1 +
 kernel/irq/manage.c                                |  4 +-
 kernel/time/posix-clock.c                          | 34 ++++++---
 mm/memory-failure.c                                |  8 ++
 mm/vmscan.c                                        |  6 +-
 mm/vmstat.c                                        | 20 +++--
 net/ipv4/tcp_input.c                               | 16 ++--
 net/ipv6/ip6_vti.c                                 | 20 +++++
 net/ipv6/ndisc.c                                   |  2 +
 net/mac80211/cfg.c                                 | 30 ++++----
 net/mac80211/ibss.c                                |  6 +-
 net/mac80211/ieee80211_i.h                         | 36 +++++----
 net/mac80211/mesh.c                                | 29 ++++---
 net/mac80211/mesh_plink.c                          | 37 ++++++---
 net/mac80211/mlme.c                                | 14 +++-
 net/mac80211/rate.c                                |  4 +-
 net/mac80211/sta_info.c                            | 13 +++-
 net/mac80211/status.c                              |  1 +
 net/mac80211/tdls.c                                | 29 ++++---
 net/mac80211/tx.c                                  |  5 +-
 net/mac80211/util.c                                |  6 +-
 net/netfilter/ipvs/ip_vs_ctl.c                     | 22 ++++--
 net/netfilter/nf_conntrack_helper.c                | 26 +++++--
 net/netfilter/nft_dynset.c                         |  5 +-
 net/netfilter/x_tables.c                           |  4 +-
 net/netfilter/xt_CT.c                              | 11 ++-
 net/openvswitch/conntrack.c                        | 30 +++++++-
 net/sunrpc/xprtrdma/verbs.c                        |  1 +
 net/tipc/node.c                                    |  2 +
 sound/pci/hda/patch_realtek.c                      | 12 ++-
 sound/soc/intel/atom/sst/sst_acpi.c                | 16 +++-
 sound/soc/intel/skylake/skl.c                      |  2 +-
 sound/soc/sh/rcar/cmd.c                            |  3 +
 tools/perf/tests/kmod-path.c                       |  2 +
 tools/testing/nvdimm/test/nfit.c                   | 10 ++-
 197 files changed, 1624 insertions(+), 607 deletions(-)

[PATCH 4.9 001/177] tpm: fix potential buffer overruns caused by bit glitches on the bus

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeremy Boone <jeremy.boone@nccgroup.trust>

commit 3be23274755ee85771270a23af7691dc9b3a95db upstream.

Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips.  If a bit does
flip it could cause an overrun if it's in one of the size parameters,
so sanity check that we're not overrunning the provided buffer when
doing a memcpy().

Signed-off-by: Jeremy Boone <jeremy.boone@nccgroup.trust>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/tpm-interface.c |    5 +++++
 drivers/char/tpm/tpm2-cmd.c      |    6 ++++++
 2 files changed, 11 insertions(+)

--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -1078,6 +1078,11 @@ int tpm_get_random(u32 chip_num, u8 *out
 			break;
 
 		recd = be32_to_cpu(tpm_cmd.params.getrandom_out.rng_data_len);
+		if (recd > num_bytes) {
+			total = -EFAULT;
+			break;
+		}
+
 		memcpy(dest, tpm_cmd.params.getrandom_out.rng_data, recd);
 
 		dest += recd;
--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -668,6 +668,11 @@ static int tpm2_unseal_cmd(struct tpm_ch
 	if (!rc) {
 		data_len = be16_to_cpup(
 			(__be16 *) &buf.data[TPM_HEADER_SIZE + 4]);
+		if (data_len < MIN_KEY_SIZE ||  data_len > MAX_KEY_SIZE + 1) {
+			rc = -EFAULT;
+			goto out;
+		}
+
 		data = &buf.data[TPM_HEADER_SIZE + 6];
 
 		memcpy(payload->key, data, data_len - 1);
@@ -675,6 +680,7 @@ static int tpm2_unseal_cmd(struct tpm_ch
 		payload->migratable = data[data_len - 1];
 	}
 
+out:
 	tpm_buf_destroy(&buf);
 	return rc;
 }

[PATCH 4.9 002/177] ASoC: rsnd: check src mod pointer for rsnd_mod_id()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

commit 374503c6109e60f48fa9b11341b14466f07bd3f4 upstream.

Without this patch, gcc 4.9.x says

    sound/soc/sh/rcar/cmd.c: In function 'rsnd_cmd_init':
    sound/soc/sh/rcar/cmd.c:85:14: warning: array subscript is below array\
	bounds [-Warray-bounds]
	data = path[rsnd_mod_id(src)] |

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/sh/rcar/cmd.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/sound/soc/sh/rcar/cmd.c
+++ b/sound/soc/sh/rcar/cmd.c
@@ -82,6 +82,9 @@ static int rsnd_cmd_init(struct rsnd_mod
 			[9] = 0x2,
 		};
 
+		if (unlikely(!src))
+			return -EIO;
+
 		data = path[rsnd_mod_id(src)] |
 			cmd_case[rsnd_mod_id(src)] << 16;
 	}

[PATCH 4.9 003/177] SMB3: Validate negotiate request must always be signed

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve French <smfrench@gmail.com>

commit 4587eee04e2ac7ac3ac9fa2bc164fb6e548f99cd upstream.

According to MS-SMB2 3.2.55 validate_negotiate request must
always be signed. Some Windows can fail the request if you send it unsigned

See kernel bugzilla bug 197311

CC: Stable <stable@vger.kernel.org>
Acked-by: Ronnie Sahlberg <lsahlber.redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2pdu.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -1712,6 +1712,9 @@ SMB2_ioctl(const unsigned int xid, struc
 	} else
 		iov[0].iov_len = get_rfc1002_length(req) + 4;
 
+	/* validate negotiate request must be signed - see MS-SMB2 3.2.5.5 */
+	if (opcode == FSCTL_VALIDATE_NEGOTIATE_INFO)
+		req->hdr.Flags |= SMB2_FLAGS_SIGNED;
 
 	rc = SendReceive2(xid, ses, iov, num_iovecs, &resp_buftype, 0);
 	rsp = (struct smb2_ioctl_rsp *)iov[0].iov_base;

[PATCH 4.9 004/177] CIFS: Enable encryption during session setup phase

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Shilovsky <pshilov@microsoft.com>

commit cabfb3680f78981d26c078a26e5c748531257ebb upstream.

In order to allow encryption on SMB connection we need to exchange
a session key and generate encryption and decryption keys.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 fs/cifs/sess.c    |   22 ++++++++++------------
 fs/cifs/smb2pdu.c |   12 ++----------
 2 files changed, 12 insertions(+), 22 deletions(-)

--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -344,13 +344,12 @@ void build_ntlmssp_negotiate_blob(unsign
 	/* BB is NTLMV2 session security format easier to use here? */
 	flags = NTLMSSP_NEGOTIATE_56 |	NTLMSSP_REQUEST_TARGET |
 		NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
-		NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_EXTENDED_SEC;
-	if (ses->server->sign) {
+		NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_EXTENDED_SEC |
+		NTLMSSP_NEGOTIATE_SEAL;
+	if (ses->server->sign)
 		flags |= NTLMSSP_NEGOTIATE_SIGN;
-		if (!ses->server->session_estab ||
-				ses->ntlmssp->sesskey_per_smbsess)
-			flags |= NTLMSSP_NEGOTIATE_KEY_XCH;
-	}
+	if (!ses->server->session_estab || ses->ntlmssp->sesskey_per_smbsess)
+		flags |= NTLMSSP_NEGOTIATE_KEY_XCH;
 
 	sec_blob->NegotiateFlags = cpu_to_le32(flags);
 
@@ -407,13 +406,12 @@ int build_ntlmssp_auth_blob(unsigned cha
 	flags = NTLMSSP_NEGOTIATE_56 |
 		NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_TARGET_INFO |
 		NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
-		NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_EXTENDED_SEC;
-	if (ses->server->sign) {
+		NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_EXTENDED_SEC |
+		NTLMSSP_NEGOTIATE_SEAL;
+	if (ses->server->sign)
 		flags |= NTLMSSP_NEGOTIATE_SIGN;
-		if (!ses->server->session_estab ||
-				ses->ntlmssp->sesskey_per_smbsess)
-			flags |= NTLMSSP_NEGOTIATE_KEY_XCH;
-	}
+	if (!ses->server->session_estab || ses->ntlmssp->sesskey_per_smbsess)
+		flags |= NTLMSSP_NEGOTIATE_KEY_XCH;
 
 	tmp = *pbuffer + sizeof(AUTHENTICATE_MESSAGE);
 	sec_blob->NegotiateFlags = cpu_to_le32(flags);
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -707,15 +707,13 @@ SMB2_sess_establish_session(struct SMB2_
 	struct cifs_ses *ses = sess_data->ses;
 
 	mutex_lock(&ses->server->srv_mutex);
-	if (ses->server->sign && ses->server->ops->generate_signingkey) {
+	if (ses->server->ops->generate_signingkey) {
 		rc = ses->server->ops->generate_signingkey(ses);
-		kfree(ses->auth_key.response);
-		ses->auth_key.response = NULL;
 		if (rc) {
 			cifs_dbg(FYI,
 				"SMB3 session key generation failed\n");
 			mutex_unlock(&ses->server->srv_mutex);
-			goto keygen_exit;
+			return rc;
 		}
 	}
 	if (!ses->server->session_estab) {
@@ -729,12 +727,6 @@ SMB2_sess_establish_session(struct SMB2_
 	ses->status = CifsGood;
 	ses->need_reconnect = false;
 	spin_unlock(&GlobalMid_Lock);
-
-keygen_exit:
-	if (!ses->server->sign) {
-		kfree(ses->auth_key.response);
-		ses->auth_key.response = NULL;
-	}
 	return rc;
 }
 

[PATCH 4.9 005/177] staging: android: ashmem: Fix possible deadlock in ashmem_ioctl

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yisheng Xie <xieyisheng1@huawei.com>

commit 740a5759bf222332fbb5eda42f89aa25ba38f9b2 upstream.

ashmem_mutex may create a chain of dependencies like:

CPU0                                    CPU1
 mmap syscall                           ioctl syscall
 -> mmap_sem (acquired)                 -> ashmem_ioctl
 -> ashmem_mmap                            -> ashmem_mutex (acquired)
    -> ashmem_mutex (try to acquire)       -> copy_from_user
                                              -> mmap_sem (try to acquire)

There is a lock odering problem between mmap_sem and ashmem_mutex causing
a lockdep splat[1] during a syzcaller test. This patch fixes the problem
by move copy_from_user out of ashmem_mutex.

[1] https://www.spinics.net/lists/kernel/msg2733200.html

Fixes: ce8a3a9e76d0 (staging: android: ashmem: Fix a race condition in pin ioctls)
Reported-by: syzbot+d7a918a7a8e1c952bc36@syzkaller.appspotmail.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Cc: "Joel Fernandes (Google)" <joel.opensrc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/android/ashmem.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/drivers/staging/android/ashmem.c
+++ b/drivers/staging/android/ashmem.c
@@ -718,16 +718,14 @@ static int ashmem_pin_unpin(struct ashme
 	size_t pgstart, pgend;
 	int ret = -EINVAL;
 
+	if (unlikely(copy_from_user(&pin, p, sizeof(pin))))
+		return -EFAULT;
+
 	mutex_lock(&ashmem_mutex);
 
 	if (unlikely(!asma->file))
 		goto out_unlock;
 
-	if (unlikely(copy_from_user(&pin, p, sizeof(pin)))) {
-		ret = -EFAULT;
-		goto out_unlock;
-	}
-
 	/* per custom, you can pass zero for len to mean "everything onward" */
 	if (!pin.len)
 		pin.len = PAGE_ALIGN(asma->size) - pin.offset;

[PATCH 4.9 006/177] Revert "led: core: Fix brightness setting when setting delay_off=0"

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jacek Anaszewski <jacek.anaszewski@gmail.com>

This reverts commit 86b9fa2190907f4f550d9d6bf490c5f89ca33836 which was
commit 2b83ff96f51d0b039c4561b9f95c824d7bddb85c upstream.

The commit being reverted has two flaws:
 - it introduces a regression, fixed in the upstream
   commit 7b6af2c53192f1766892ef40c8f48a413509ed72.
 - it has truncated commit message

Reported-by: Sasha Levin <Alexander.Levin@microsoft.com>
Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/leds/led-core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/leds/led-core.c
+++ b/drivers/leds/led-core.c
@@ -186,7 +186,7 @@ void led_blink_set(struct led_classdev *
 		   unsigned long *delay_on,
 		   unsigned long *delay_off)
 {
-	led_stop_software_blink(led_cdev);
+	del_timer_sync(&led_cdev->blink_timer);
 
 	led_cdev->flags &= ~LED_BLINK_ONESHOT;
 	led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP;

[PATCH 4.9 007/177] led: core: Clear LED_BLINK_SW flag in led_blink_set()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jacek Anaszewski <jacek.anaszewski@gmail.com>

[Only needed in 4.9.y due to other fixes in mainline - gregkh]

With the current code, the following sequence won't work :
echo timer > trigger

echo 0 >  delay_off
* at this point we call
** led_delay_off_store
** led_blink_set
---
 drivers/leds/led-core.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/leds/led-core.c
+++ b/drivers/leds/led-core.c
@@ -188,6 +188,7 @@ void led_blink_set(struct led_classdev *
 {
 	del_timer_sync(&led_cdev->blink_timer);
 
+	led_cdev->flags &= ~LED_BLINK_SW;
 	led_cdev->flags &= ~LED_BLINK_ONESHOT;
 	led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP;
 

[PATCH 4.9 008/177] platform/x86: asus-nb-wmi: Add wapf4 quirk for the X302UA

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Santeri Toivonen <santeri.toivonen@vatsul.com>


[ Upstream commit f35823619db8bbaa2afea8705f239c3cecb9d22f ]

Asus laptop X302UA starts up with Wi-Fi disabled,
without a way to enable it. Set wapf=4 to fix the problem.

Signed-off-by: Santeri Toivonen <santeri.toivonen@vatsul.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/x86/asus-nb-wmi.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -152,6 +152,15 @@ static const struct dmi_system_id asus_q
 	},
 	{
 		.callback = dmi_matched,
+		.ident = "ASUSTeK COMPUTER INC. X302UA",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X302UA"),
+		},
+		.driver_data = &quirk_asus_wapf4,
+	},
+	{
+		.callback = dmi_matched,
 		.ident = "ASUSTeK COMPUTER INC. X401U",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),

[PATCH 4.9 009/177] bonding: handle link transition from FAIL to UP correctly

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mahesh Bandewar <maheshb@google.com>


[ Upstream commit fb9eb899a6dc663e4a2deed9af2ac28f507d0ffb ]

When link transitions from LINK_FAIL to LINK_UP, the commit phase is
not called. This leads to an erroneous state causing slave-link state to
get stuck in "going down" state while its speed and duplex are perfectly
fine. This issue is a side-effect of splitting link-set into propose and
commit phases introduced by de77ecd4ef02 ("bonding: improve link-status
update in mii-monitoring")

This patch fixes these issues by calling commit phase whenever link
state change is proposed.

Fixes: de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/bonding/bond_main.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2067,6 +2067,7 @@ static int bond_miimon_inspect(struct bo
 					    (bond->params.downdelay - slave->delay) *
 					    bond->params.miimon,
 					    slave->dev->name);
+				commit++;
 				continue;
 			}
 
@@ -2104,7 +2105,7 @@ static int bond_miimon_inspect(struct bo
 					    (bond->params.updelay - slave->delay) *
 					    bond->params.miimon,
 					    slave->dev->name);
-
+				commit++;
 				continue;
 			}
 

[PATCH 4.9 010/177] regulator: anatop: set default voltage selector for pcie

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dong Aisheng <aisheng.dong@nxp.com>


[ Upstream commit 9bf944548169f6153c3d3778cf983cb5db251a0e ]

Set the initial voltage selector for vddpcie in case it's disabled
by default.

This fixes the below warning:
20c8000.anatop:regulator-vddpcie: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddpcie failed with error -22

Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Robin Gong <yibin.gong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/regulator/anatop-regulator.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -296,6 +296,11 @@ static int anatop_regulator_probe(struct
 		if (!sreg->sel && !strcmp(sreg->name, "vddpu"))
 			sreg->sel = 22;
 
+		/* set the default voltage of the pcie phy to be 1.100v */
+		if (!sreg->sel && rdesc->name &&
+		    !strcmp(rdesc->name, "vddpcie"))
+			sreg->sel = 0x10;
+
 		if (!sreg->bypass && !sreg->sel) {
 			dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n");
 			return -EINVAL;

[PATCH 4.9 011/177] power: supply: bq24190_charger: Limit over/under voltage fault logging

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liam Breck <kernel@networkimprov.net>


[ Upstream commit d63d07c6fc25182af6d3ab5b3b8737b0c1025ebd ]

If the charger is unplugged before the battery is full we may
see an over/under voltage fault. Ignore this rather then emitting
a message or uevent.

This fixes messages like these getting logged on charger unplug + replug:
bq24190-charger 15-006b: Fault: boost 0, charge 1, battery 0, ntc 0
bq24190-charger 15-006b: Fault: boost 0, charge 0, battery 0, ntc 0

Cc: Tony Lindgren <tony@atomide.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/power/supply/bq24190_charger.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -1184,8 +1184,13 @@ static irqreturn_t bq24190_irq_handler_t
 		}
 	} while (f_reg && ++i < 2);
 
+	/* ignore over/under voltage fault after disconnect */
+	if (f_reg == (1 << BQ24190_REG_F_CHRG_FAULT_SHIFT) &&
+	    !(ss_reg & BQ24190_REG_SS_PG_STAT_MASK))
+		f_reg = 0;
+
 	if (f_reg != bdi->f_reg) {
-		dev_info(bdi->dev,
+		dev_warn(bdi->dev,
 			"Fault: boost %d, charge %d, battery %d, ntc %d\n",
 			!!(f_reg & BQ24190_REG_F_BOOST_FAULT_MASK),
 			!!(f_reg & BQ24190_REG_F_CHRG_FAULT_MASK),

[PATCH 4.9 012/177] x86: i8259: export legacy_pic symbol

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>


[ Upstream commit 7ee06cb2f840a96be46233181ed4557901a74385 ]

The classic PC rtc-coms driver has a workaround for broken ACPI device
nodes for it which lack an irq resource. This workaround used to
unconditionally hardcode the irq to 8 in these cases.

This was causing irq conflict problems on systems without a legacy-pic
so a recent patch added an if (nr_legacy_irqs()) guard to the
workaround to avoid this irq conflict.

nr_legacy_irqs() uses the legacy_pic symbol under the hood causing
an undefined symbol error if the rtc-cmos code is build as a module.

This commit exports the legacy_pic symbol to fix this.

Cc: rtc-linux@googlegroups.com
Cc: alexandre.belloni@free-electrons.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/i8259.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -418,6 +418,7 @@ struct legacy_pic default_legacy_pic = {
 };
 
 struct legacy_pic *legacy_pic = &default_legacy_pic;
+EXPORT_SYMBOL(legacy_pic);
 
 static int __init i8259A_init_ops(void)
 {

[PATCH 4.9 013/177] rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>


[ Upstream commit a1e23a42f1bdc00e32fc4869caef12e4e6272f26 ]

On some systems (e.g. Intel Bay Trail systems) the legacy PIC is not
used, in this case virq 8 will be a random irq, rather then hw_irq 8
from the PIC.

Requesting virq 8 in this case will not help us to get alarm irqs and
may cause problems for other drivers which actually do need virq 8,
for example on an Asus Transformer T100TA this leads to:

[ 28.745155] genirq: Flags mismatch irq 8. 00000088 (mmc0) vs. 00000080 (rtc0)
<snip oops>
[ 28.753700] mmc0: Failed to request IRQ 8: -16
[ 28.975934] sdhci-acpi: probe of 80860F14:01 failed with error -16

This commit fixes this by making the rtc-cmos driver continue
without using an irq rather then claiming irq 8 when no irq is
specified in the pnp-info and there are no legacy-irqs.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-cmos.c |   17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -41,6 +41,9 @@
 #include <linux/pm.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#ifdef CONFIG_X86
+#include <asm/i8259.h>
+#endif
 
 /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
 #include <linux/mc146818rtc.h>
@@ -1117,17 +1120,23 @@ static int cmos_pnp_probe(struct pnp_dev
 {
 	cmos_wake_setup(&pnp->dev);
 
-	if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0))
+	if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0)) {
+		unsigned int irq = 0;
+#ifdef CONFIG_X86
 		/* Some machines contain a PNP entry for the RTC, but
 		 * don't define the IRQ. It should always be safe to
-		 * hardcode it in these cases
+		 * hardcode it on systems with a legacy PIC.
 		 */
+		if (nr_legacy_irqs())
+			irq = 8;
+#endif
 		return cmos_do_probe(&pnp->dev,
-				pnp_get_resource(pnp, IORESOURCE_IO, 0), 8);
-	else
+				pnp_get_resource(pnp, IORESOURCE_IO, 0), irq);
+	} else {
 		return cmos_do_probe(&pnp->dev,
 				pnp_get_resource(pnp, IORESOURCE_IO, 0),
 				pnp_irq(pnp, 0));
+	}
 }
 
 static void cmos_pnp_remove(struct pnp_dev *pnp)

[PATCH 4.9 014/177] Input: ar1021_i2c - fix too long name in drivers device table

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>


[ Upstream commit 95123fc43560d6f4a60e74f72836e63cd8848f76 ]

The name field in structure i2c_device_id is 20 characters, and we expect
it to be NULL-terminated, however we are trying to stuff it with 21 bytes
and thus NULL-terminator is lost. This causes issues when one creates
device with name "MICROCHIP_AR1021_I2C" as i2c core cuts off the last "C",
and automatic module loading by alias does not work as result.

The -I2C suffix in the device name is superfluous, we know what bus we are
dealing with, so let's drop it. Also, no other driver uses capitals, and
the manufacturer name is normally not included, except in very rare cases
of incompatible name collisions.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116211
Fixes: dd4cae8bf166 ("Input: Add Microchip AR1021 i2c touchscreen")
Reviewed-By: Christian Gmeiner <christian.gmeiner@gmail.com>
Tested-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/touchscreen/ar1021_i2c.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/input/touchscreen/ar1021_i2c.c
+++ b/drivers/input/touchscreen/ar1021_i2c.c
@@ -152,7 +152,7 @@ static int __maybe_unused ar1021_i2c_res
 static SIMPLE_DEV_PM_OPS(ar1021_i2c_pm, ar1021_i2c_suspend, ar1021_i2c_resume);
 
 static const struct i2c_device_id ar1021_i2c_id[] = {
-	{ "MICROCHIP_AR1021_I2C", 0 },
+	{ "ar1021", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(i2c, ar1021_i2c_id);

[PATCH 4.9 015/177] time: Change posix clocks ops interfaces to use timespec64

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Deepa Dinamani <deepa.kernel@gmail.com>


[ Upstream commit d340266e19ddb70dbd608f9deedcfb35fdb9d419 ]

struct timespec is not y2038 safe on 32 bit machines.

The posix clocks apis use struct timespec directly and through struct
itimerspec.

Replace the posix clock interfaces to use struct timespec64 and struct
itimerspec64 instead.  Also fix up their implementations accordingly.

Note that the clock_getres() interface has also been changed to use
timespec64 even though this particular interface is not affected by the
y2038 problem. This helps verification for internal kernel code for y2038
readiness by getting rid of time_t/ timeval/ timespec.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: arnd@arndb.de
Cc: y2038@lists.linaro.org
Cc: netdev@vger.kernel.org
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: john.stultz@linaro.org
Link: http://lkml.kernel.org/r/1490555058-4603-3-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/ptp/ptp_clock.c     |   18 +++++++-----------
 include/linux/posix-clock.h |   10 +++++-----
 kernel/time/posix-clock.c   |   34 ++++++++++++++++++++++++----------
 3 files changed, 36 insertions(+), 26 deletions(-)

--- a/drivers/ptp/ptp_clock.c
+++ b/drivers/ptp/ptp_clock.c
@@ -97,30 +97,26 @@ static s32 scaled_ppm_to_ppb(long ppm)
 
 /* posix clock implementation */
 
-static int ptp_clock_getres(struct posix_clock *pc, struct timespec *tp)
+static int ptp_clock_getres(struct posix_clock *pc, struct timespec64 *tp)
 {
 	tp->tv_sec = 0;
 	tp->tv_nsec = 1;
 	return 0;
 }
 
-static int ptp_clock_settime(struct posix_clock *pc, const struct timespec *tp)
+static int ptp_clock_settime(struct posix_clock *pc, const struct timespec64 *tp)
 {
 	struct ptp_clock *ptp = container_of(pc, struct ptp_clock, clock);
-	struct timespec64 ts = timespec_to_timespec64(*tp);
 
-	return  ptp->info->settime64(ptp->info, &ts);
+	return  ptp->info->settime64(ptp->info, tp);
 }
 
-static int ptp_clock_gettime(struct posix_clock *pc, struct timespec *tp)
+static int ptp_clock_gettime(struct posix_clock *pc, struct timespec64 *tp)
 {
 	struct ptp_clock *ptp = container_of(pc, struct ptp_clock, clock);
-	struct timespec64 ts;
 	int err;
 
-	err = ptp->info->gettime64(ptp->info, &ts);
-	if (!err)
-		*tp = timespec64_to_timespec(ts);
+	err = ptp->info->gettime64(ptp->info, tp);
 	return err;
 }
 
@@ -133,7 +129,7 @@ static int ptp_clock_adjtime(struct posi
 	ops = ptp->info;
 
 	if (tx->modes & ADJ_SETOFFSET) {
-		struct timespec ts;
+		struct timespec64 ts;
 		ktime_t kt;
 		s64 delta;
 
@@ -146,7 +142,7 @@ static int ptp_clock_adjtime(struct posi
 		if ((unsigned long) ts.tv_nsec >= NSEC_PER_SEC)
 			return -EINVAL;
 
-		kt = timespec_to_ktime(ts);
+		kt = timespec64_to_ktime(ts);
 		delta = ktime_to_ns(kt);
 		err = ops->adjtime(ops, delta);
 	} else if (tx->modes & ADJ_FREQUENCY) {
--- a/include/linux/posix-clock.h
+++ b/include/linux/posix-clock.h
@@ -59,23 +59,23 @@ struct posix_clock_operations {
 
 	int  (*clock_adjtime)(struct posix_clock *pc, struct timex *tx);
 
-	int  (*clock_gettime)(struct posix_clock *pc, struct timespec *ts);
+	int  (*clock_gettime)(struct posix_clock *pc, struct timespec64 *ts);
 
-	int  (*clock_getres) (struct posix_clock *pc, struct timespec *ts);
+	int  (*clock_getres) (struct posix_clock *pc, struct timespec64 *ts);
 
 	int  (*clock_settime)(struct posix_clock *pc,
-			      const struct timespec *ts);
+			      const struct timespec64 *ts);
 
 	int  (*timer_create) (struct posix_clock *pc, struct k_itimer *kit);
 
 	int  (*timer_delete) (struct posix_clock *pc, struct k_itimer *kit);
 
 	void (*timer_gettime)(struct posix_clock *pc,
-			      struct k_itimer *kit, struct itimerspec *tsp);
+			      struct k_itimer *kit, struct itimerspec64 *tsp);
 
 	int  (*timer_settime)(struct posix_clock *pc,
 			      struct k_itimer *kit, int flags,
-			      struct itimerspec *tsp, struct itimerspec *old);
+			      struct itimerspec64 *tsp, struct itimerspec64 *old);
 	/*
 	 * Optional character device methods:
 	 */
--- a/kernel/time/posix-clock.c
+++ b/kernel/time/posix-clock.c
@@ -300,14 +300,17 @@ out:
 static int pc_clock_gettime(clockid_t id, struct timespec *ts)
 {
 	struct posix_clock_desc cd;
+	struct timespec64 ts64;
 	int err;
 
 	err = get_clock_desc(id, &cd);
 	if (err)
 		return err;
 
-	if (cd.clk->ops.clock_gettime)
-		err = cd.clk->ops.clock_gettime(cd.clk, ts);
+	if (cd.clk->ops.clock_gettime) {
+		err = cd.clk->ops.clock_gettime(cd.clk, &ts64);
+		*ts = timespec64_to_timespec(ts64);
+	}
 	else
 		err = -EOPNOTSUPP;
 
@@ -319,14 +322,17 @@ static int pc_clock_gettime(clockid_t id
 static int pc_clock_getres(clockid_t id, struct timespec *ts)
 {
 	struct posix_clock_desc cd;
+	struct timespec64 ts64;
 	int err;
 
 	err = get_clock_desc(id, &cd);
 	if (err)
 		return err;
 
-	if (cd.clk->ops.clock_getres)
-		err = cd.clk->ops.clock_getres(cd.clk, ts);
+	if (cd.clk->ops.clock_getres) {
+		err = cd.clk->ops.clock_getres(cd.clk, &ts64);
+		*ts = timespec64_to_timespec(ts64);
+	}
 	else
 		err = -EOPNOTSUPP;
 
@@ -337,6 +343,7 @@ static int pc_clock_getres(clockid_t id,
 
 static int pc_clock_settime(clockid_t id, const struct timespec *ts)
 {
+	struct timespec64 ts64 = timespec_to_timespec64(*ts);
 	struct posix_clock_desc cd;
 	int err;
 
@@ -350,7 +357,7 @@ static int pc_clock_settime(clockid_t id
 	}
 
 	if (cd.clk->ops.clock_settime)
-		err = cd.clk->ops.clock_settime(cd.clk, ts);
+		err = cd.clk->ops.clock_settime(cd.clk, &ts64);
 	else
 		err = -EOPNOTSUPP;
 out:
@@ -403,29 +410,36 @@ static void pc_timer_gettime(struct k_it
 {
 	clockid_t id = kit->it_clock;
 	struct posix_clock_desc cd;
+	struct itimerspec64 ts64;
 
 	if (get_clock_desc(id, &cd))
 		return;
 
-	if (cd.clk->ops.timer_gettime)
-		cd.clk->ops.timer_gettime(cd.clk, kit, ts);
-
+	if (cd.clk->ops.timer_gettime) {
+		cd.clk->ops.timer_gettime(cd.clk, kit, &ts64);
+		*ts = itimerspec64_to_itimerspec(&ts64);
+	}
 	put_clock_desc(&cd);
 }
 
 static int pc_timer_settime(struct k_itimer *kit, int flags,
 			    struct itimerspec *ts, struct itimerspec *old)
 {
+	struct itimerspec64 ts64 = itimerspec_to_itimerspec64(ts);
 	clockid_t id = kit->it_clock;
 	struct posix_clock_desc cd;
+	struct itimerspec64 old64;
 	int err;
 
 	err = get_clock_desc(id, &cd);
 	if (err)
 		return err;
 
-	if (cd.clk->ops.timer_settime)
-		err = cd.clk->ops.timer_settime(cd.clk, kit, flags, ts, old);
+	if (cd.clk->ops.timer_settime) {
+		err = cd.clk->ops.timer_settime(cd.clk, kit, flags, &ts64, &old64);
+		if (old)
+			*old = itimerspec64_to_itimerspec(&old64);
+	}
 	else
 		err = -EOPNOTSUPP;
 

[PATCH 4.9 016/177] ACPI/processor: Fix error handling in __acpi_processor_start()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>


[ Upstream commit a5cbdf693a60d5b86d4d21dfedd90f17754eb273 ]

When acpi_install_notify_handler() fails the cooling device stays
registered and the sysfs files created via acpi_pss_perf_init() are
leaked and the function returns success.

Undo acpi_pss_perf_init() and return a proper error code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: linux-acpi@vger.kernel.org
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/20170412201042.695499645@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/processor_driver.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -251,6 +251,9 @@ static int __acpi_processor_start(struct
 	if (ACPI_SUCCESS(status))
 		return 0;
 
+	result = -ENODEV;
+	acpi_pss_perf_exit(pr, device);
+
 err_power_exit:
 	acpi_processor_power_exit(pr);
 	return result;

[PATCH 4.9 017/177] ACPI/processor: Replace racy task affinity logic

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>


[ Upstream commit 8153f9ac43897f9f4786b30badc134fcc1a4fb11 ]

acpi_processor_get_throttling() requires to invoke the getter function on
the target CPU. This is achieved by temporarily setting the affinity of the
calling user space thread to the requested CPU and reset it to the original
affinity afterwards.

That's racy vs. CPU hotplug and concurrent affinity settings for that
thread resulting in code executing on the wrong CPU and overwriting the
new affinity setting.

acpi_processor_get_throttling() is invoked in two ways:

1) The CPU online callback, which is already running on the target CPU and
   obviously protected against hotplug and not affected by affinity
   settings.

2) The ACPI driver probe function, which is not protected against hotplug
   during modprobe.

Switch it over to work_on_cpu() and protect the probe function against CPU
hotplug.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: linux-acpi@vger.kernel.org
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/20170412201042.785920903@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/processor_driver.c     |    7 +++-
 drivers/acpi/processor_throttling.c |   62 ++++++++++++++++++++----------------
 2 files changed, 42 insertions(+), 27 deletions(-)

--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -262,11 +262,16 @@ err_power_exit:
 static int acpi_processor_start(struct device *dev)
 {
 	struct acpi_device *device = ACPI_COMPANION(dev);
+	int ret;
 
 	if (!device)
 		return -ENODEV;
 
-	return __acpi_processor_start(device);
+	/* Protect against concurrent CPU hotplug operations */
+	get_online_cpus();
+	ret = __acpi_processor_start(device);
+	put_online_cpus();
+	return ret;
 }
 
 static int acpi_processor_stop(struct device *dev)
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -62,8 +62,8 @@ struct acpi_processor_throttling_arg {
 #define THROTTLING_POSTCHANGE      (2)
 
 static int acpi_processor_get_throttling(struct acpi_processor *pr);
-int acpi_processor_set_throttling(struct acpi_processor *pr,
-						int state, bool force);
+static int __acpi_processor_set_throttling(struct acpi_processor *pr,
+					   int state, bool force, bool direct);
 
 static int acpi_processor_update_tsd_coord(void)
 {
@@ -891,7 +891,8 @@ static int acpi_processor_get_throttling
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				"Invalid throttling state, reset\n"));
 			state = 0;
-			ret = acpi_processor_set_throttling(pr, state, true);
+			ret = __acpi_processor_set_throttling(pr, state, true,
+							      true);
 			if (ret)
 				return ret;
 		}
@@ -901,36 +902,31 @@ static int acpi_processor_get_throttling
 	return 0;
 }
 
-static int acpi_processor_get_throttling(struct acpi_processor *pr)
+static long __acpi_processor_get_throttling(void *data)
 {
-	cpumask_var_t saved_mask;
-	int ret;
+	struct acpi_processor *pr = data;
+
+	return pr->throttling.acpi_processor_get_throttling(pr);
+}
 
+static int acpi_processor_get_throttling(struct acpi_processor *pr)
+{
 	if (!pr)
 		return -EINVAL;
 
 	if (!pr->flags.throttling)
 		return -ENODEV;
 
-	if (!alloc_cpumask_var(&saved_mask, GFP_KERNEL))
-		return -ENOMEM;
-
 	/*
-	 * Migrate task to the cpu pointed by pr.
+	 * This is either called from the CPU hotplug callback of
+	 * processor_driver or via the ACPI probe function. In the latter
+	 * case the CPU is not guaranteed to be online. Both call sites are
+	 * protected against CPU hotplug.
 	 */
-	cpumask_copy(saved_mask, &current->cpus_allowed);
-	/* FIXME: use work_on_cpu() */
-	if (set_cpus_allowed_ptr(current, cpumask_of(pr->id))) {
-		/* Can't migrate to the target pr->id CPU. Exit */
-		free_cpumask_var(saved_mask);
+	if (!cpu_online(pr->id))
 		return -ENODEV;
-	}
-	ret = pr->throttling.acpi_processor_get_throttling(pr);
-	/* restore the previous state */
-	set_cpus_allowed_ptr(current, saved_mask);
-	free_cpumask_var(saved_mask);
 
-	return ret;
+	return work_on_cpu(pr->id, __acpi_processor_get_throttling, pr);
 }
 
 static int acpi_processor_get_fadt_info(struct acpi_processor *pr)
@@ -1080,8 +1076,15 @@ static long acpi_processor_throttling_fn
 			arg->target_state, arg->force);
 }
 
-int acpi_processor_set_throttling(struct acpi_processor *pr,
-						int state, bool force)
+static int call_on_cpu(int cpu, long (*fn)(void *), void *arg, bool direct)
+{
+	if (direct)
+		return fn(arg);
+	return work_on_cpu(cpu, fn, arg);
+}
+
+static int __acpi_processor_set_throttling(struct acpi_processor *pr,
+					   int state, bool force, bool direct)
 {
 	int ret = 0;
 	unsigned int i;
@@ -1130,7 +1133,8 @@ int acpi_processor_set_throttling(struct
 		arg.pr = pr;
 		arg.target_state = state;
 		arg.force = force;
-		ret = work_on_cpu(pr->id, acpi_processor_throttling_fn, &arg);
+		ret = call_on_cpu(pr->id, acpi_processor_throttling_fn, &arg,
+				  direct);
 	} else {
 		/*
 		 * When the T-state coordination is SW_ALL or HW_ALL,
@@ -1163,8 +1167,8 @@ int acpi_processor_set_throttling(struct
 			arg.pr = match_pr;
 			arg.target_state = state;
 			arg.force = force;
-			ret = work_on_cpu(pr->id, acpi_processor_throttling_fn,
-				&arg);
+			ret = call_on_cpu(pr->id, acpi_processor_throttling_fn,
+					  &arg, direct);
 		}
 	}
 	/*
@@ -1182,6 +1186,12 @@ int acpi_processor_set_throttling(struct
 	return ret;
 }
 
+int acpi_processor_set_throttling(struct acpi_processor *pr, int state,
+				  bool force)
+{
+	return __acpi_processor_set_throttling(pr, state, force, false);
+}
+
 int acpi_processor_get_throttling_info(struct acpi_processor *pr)
 {
 	int result = 0;

[PATCH 4.9 018/177] cpufreq/sh: Replace racy task affinity logic

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>


[ Upstream commit 205dcc1ecbc566cbc20acf246e68de3b080b3ecf ]

The target() callback must run on the affected cpu. This is achieved by
temporarily setting the affinity of the calling thread to the requested CPU
and reset it to the original affinity afterwards.

That's racy vs. concurrent affinity settings for that thread resulting in
code executing on the wrong CPU.

Replace it by work_on_cpu(). All call pathes which invoke the callbacks are
already protected against CPU hotplug.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: linux-pm@vger.kernel.org
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/20170412201042.958216363@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cpufreq/sh-cpufreq.c |   45 +++++++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 18 deletions(-)

--- a/drivers/cpufreq/sh-cpufreq.c
+++ b/drivers/cpufreq/sh-cpufreq.c
@@ -30,54 +30,63 @@
 
 static DEFINE_PER_CPU(struct clk, sh_cpuclk);
 
+struct cpufreq_target {
+	struct cpufreq_policy	*policy;
+	unsigned int		freq;
+};
+
 static unsigned int sh_cpufreq_get(unsigned int cpu)
 {
 	return (clk_get_rate(&per_cpu(sh_cpuclk, cpu)) + 500) / 1000;
 }
 
-/*
- * Here we notify other drivers of the proposed change and the final change.
- */
-static int sh_cpufreq_target(struct cpufreq_policy *policy,
-			     unsigned int target_freq,
-			     unsigned int relation)
+static long __sh_cpufreq_target(void *arg)
 {
-	unsigned int cpu = policy->cpu;
+	struct cpufreq_target *target = arg;
+	struct cpufreq_policy *policy = target->policy;
+	int cpu = policy->cpu;
 	struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu);
-	cpumask_t cpus_allowed;
 	struct cpufreq_freqs freqs;
 	struct device *dev;
 	long freq;
 
-	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed_ptr(current, cpumask_of(cpu));
-
-	BUG_ON(smp_processor_id() != cpu);
+	if (smp_processor_id() != cpu)
+		return -ENODEV;
 
 	dev = get_cpu_device(cpu);
 
 	/* Convert target_freq from kHz to Hz */
-	freq = clk_round_rate(cpuclk, target_freq * 1000);
+	freq = clk_round_rate(cpuclk, target->freq * 1000);
 
 	if (freq < (policy->min * 1000) || freq > (policy->max * 1000))
 		return -EINVAL;
 
-	dev_dbg(dev, "requested frequency %u Hz\n", target_freq * 1000);
+	dev_dbg(dev, "requested frequency %u Hz\n", target->freq * 1000);
 
 	freqs.old	= sh_cpufreq_get(cpu);
 	freqs.new	= (freq + 500) / 1000;
 	freqs.flags	= 0;
 
-	cpufreq_freq_transition_begin(policy, &freqs);
-	set_cpus_allowed_ptr(current, &cpus_allowed);
+	cpufreq_freq_transition_begin(target->policy, &freqs);
 	clk_set_rate(cpuclk, freq);
-	cpufreq_freq_transition_end(policy, &freqs, 0);
+	cpufreq_freq_transition_end(target->policy, &freqs, 0);
 
 	dev_dbg(dev, "set frequency %lu Hz\n", freq);
-
 	return 0;
 }
 
+/*
+ * Here we notify other drivers of the proposed change and the final change.
+ */
+static int sh_cpufreq_target(struct cpufreq_policy *policy,
+			     unsigned int target_freq,
+			     unsigned int relation)
+{
+	struct cpufreq_target data = { .policy = policy, .freq = target_freq };
+
+	return work_on_cpu(policy->cpu, __sh_cpufreq_target, &data);
+}
+
 static int sh_cpufreq_verify(struct cpufreq_policy *policy)
 {
 	struct clk *cpuclk = &per_cpu(sh_cpuclk, policy->cpu);

[PATCH 4.9 019/177] genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>


[ Upstream commit 382bd4de61827dbaaf5fb4fb7b1f4be4a86505e7 ]

When requesting a shared irq with IRQF_TRIGGER_NONE then the irqaction
flags get filled with the trigger type from the irq_data:

        if (!(new->flags & IRQF_TRIGGER_MASK))
                new->flags |= irqd_get_trigger_type(&desc->irq_data);

On the first setup_irq() the trigger type in irq_data is NONE when the
above code executes, then the irq is started up for the first time and
then the actual trigger type gets established, but that's too late to fix
up new->flags.

When then a second user of the irq requests the irq with IRQF_TRIGGER_NONE
its irqaction's triggertype gets set to the actual trigger type and the
following check fails:

        if (!((old->flags ^ new->flags) & IRQF_TRIGGER_MASK))

Resulting in the request_irq failing with -EBUSY even though both
users requested the irq with IRQF_SHARED | IRQF_TRIGGER_NONE

Fix this by comparing the new irqaction's trigger type to the trigger type
stored in the irq_data which correctly reflects the actual trigger type
being used for the irq.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/20170415100831.17073-1-hdegoede@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/irq/manage.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1210,8 +1210,10 @@ __setup_irq(unsigned int irq, struct irq
 		 * set the trigger type must match. Also all must
 		 * agree on ONESHOT.
 		 */
+		unsigned int oldtype = irqd_get_trigger_type(&desc->irq_data);
+
 		if (!((old->flags & new->flags) & IRQF_SHARED) ||
-		    ((old->flags ^ new->flags) & IRQF_TRIGGER_MASK) ||
+		    (oldtype != (new->flags & IRQF_TRIGGER_MASK)) ||
 		    ((old->flags ^ new->flags) & IRQF_ONESHOT))
 			goto mismatch;
 

[PATCH 4.9 020/177] i2c: i2c-scmi: add a MS HID

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Edgar Cherkasov <echerkasov@dev.rtsoft.ru>


[ Upstream commit e058e7a4bc89104540a8a303682248614b5df6f1 ]

Description of the problem:
 - i2c-scmi driver contains only two identifiers "SMBUS01" and "SMBUSIBM";
 - the fist HID (SMBUS01) is clearly defined in "SMBus Control Method
   Interface Specification, version 1.0": "Each device must specify
   'SMBUS01' as its _HID and use a unique _UID value";
 - unfortunately, BIOS vendors (like AMI) seem to ignore this requirement
   and implement "SMB0001" HID instead of "SMBUS01";
 - I speculate that they do this because only "SMB0001" is hard coded in
   Windows SMBus driver produced by Microsoft.

This leads to following situation:
 - SMBus works out of box in Windows but not in Linux;
 - board vendors are forced to add correct "SMBUS01" HID to BIOS to make
   SMBus work in Linux. Moreover the same board vendors complain that
   tools (3-rd party ASL compiler) do not like the "SMBUS01" identifier
   and produce errors.  So they need to constantly patch the compiler for
   each new version of BIOS.

As it is very unlikely that BIOS vendors implement a correct HID in
future, I would propose to consider whether it is possible to work around
the problem by adding MS HID to the Linux i2c-scmi driver.

v2: move the definition of the new HID to the driver itself.

Signed-off-by: Edgar Cherkasov <echerkasov@dev.rtsoft.ru>
Signed-off-by: Michael Brunner <Michael.Brunner@kontron.com>
Acked-by: Viktor Krasnov <vkrasnov@dev.rtsoft.ru>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-scmi.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/i2c/busses/i2c-scmi.c
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -18,6 +18,9 @@
 #define ACPI_SMBUS_HC_CLASS		"smbus"
 #define ACPI_SMBUS_HC_DEVICE_NAME	"cmi"
 
+/* SMBUS HID definition as supported by Microsoft Windows */
+#define ACPI_SMBUS_MS_HID		"SMB0001"
+
 ACPI_MODULE_NAME("smbus_cmi");
 
 struct smbus_methods_t {
@@ -51,6 +54,7 @@ static const struct smbus_methods_t ibm_
 static const struct acpi_device_id acpi_smbus_cmi_ids[] = {
 	{"SMBUS01", (kernel_ulong_t)&smbus_methods},
 	{ACPI_SMBUS_IBM_HID, (kernel_ulong_t)&ibm_smbus_methods},
+	{ACPI_SMBUS_MS_HID, (kernel_ulong_t)&smbus_methods},
 	{"", 0}
 };
 MODULE_DEVICE_TABLE(acpi, acpi_smbus_cmi_ids);

[PATCH 4.9 021/177] net: ipv6: send unsolicited NA on admin up

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Ahern <dsa@cumulusnetworks.com>


[ Upstream commit 4a6e3c5def13c91adf2acc613837001f09af3baa ]

ndisc_notify is the ipv6 equivalent to arp_notify. When arp_notify is
set to 1, gratuitous arp requests are sent when the device is brought up.
The same is expected when ndisc_notify is set to 1 (per ndisc_notify in
Documentation/networking/ip-sysctl.txt). The NA is not sent on NETDEV_UP
event; add it.

Fixes: 5cb04436eef6 ("ipv6: add knob to send unsolicited ND on link-layer address change")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ndisc.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1723,6 +1723,8 @@ static int ndisc_netdev_event(struct not
 	case NETDEV_CHANGEADDR:
 		neigh_changeaddr(&nd_tbl, dev);
 		fib6_run_gc(0, net, false);
+		/* fallthrough */
+	case NETDEV_UP:
 		idev = in6_dev_get(dev);
 		if (!idev)
 			break;

[PATCH 4.9 022/177] [media] media/dvb-core: Race condition when writing to CAM

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jasmin J <jasmin@anw.at>


[ Upstream commit e7080d4471d805d921a9ea21b32f911a91e248cb ]

It started with a sporadic message in syslog: "CAM tried to send a
buffer larger than the ecount size" This message is not the fault
itself, but a consecutive fault, after a read error from the CAM. This
happens only on several CAMs, several hardware, and of course sporadic.

It is a consecutive fault, if the last read from the CAM did fail. I
guess this will not happen on all CAMs, but at least it did on mine.
There was a write error to the CAM and during the re-initialization
procedure, the CAM finished the last read, although it got a RS.

The write error to the CAM happened because a race condition between HC
write, checking DA and FR.

This patch added an additional check for DA(RE), just after checking FR.
It is important to read the CAMs status register again, to give the CAM
the necessary time for a proper reaction to HC. Please note the
description within the source code (patch below).

[mchehab@s-opensource.com: make checkpatch happy]

Signed-off-by: Jasmin jessich <jasmin@anw.at>
Tested-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/dvb-core/dvb_ca_en50221.c |   23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

--- a/drivers/media/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb-core/dvb_ca_en50221.c
@@ -779,6 +779,29 @@ static int dvb_ca_en50221_write_data(str
 		goto exit;
 	}
 
+	/*
+	 * It may need some time for the CAM to settle down, or there might
+	 * be a race condition between the CAM, writing HC and our last
+	 * check for DA. This happens, if the CAM asserts DA, just after
+	 * checking DA before we are setting HC. In this case it might be
+	 * a bug in the CAM to keep the FR bit, the lower layer/HW
+	 * communication requires a longer timeout or the CAM needs more
+	 * time internally. But this happens in reality!
+	 * We need to read the status from the HW again and do the same
+	 * we did for the previous check for DA
+	 */
+	status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS);
+	if (status < 0)
+		goto exit;
+
+	if (status & (STATUSREG_DA | STATUSREG_RE)) {
+		if (status & STATUSREG_DA)
+			dvb_ca_en50221_thread_wakeup(ca);
+
+		status = -EAGAIN;
+		goto exit;
+	}
+
 	/* send the amount of data */
 	if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH, bytes_write >> 8)) != 0)
 		goto exit;

[PATCH 4.9 023/177] btrfs: fix a bogus warning when converting only data or metadata

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adam Borowski <kilobyte@angband.pl>


[ Upstream commit 14506127979a5a3d0c5d9b4cc76ce9d4ec23b717 ]

If your filesystem has, eg, data:raid0 metadata:raid1, and you run "btrfs
balance -dconvert=raid1", the meta.target field will be uninitialized.
That's otherwise ok, as it's unused except for this warning.

Thus, let's use the existing set of raid levels for the comparison.

As a side effect, non-convert balances will now nag about data>metadata.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/volumes.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -3765,6 +3765,7 @@ int btrfs_balance(struct btrfs_balance_c
 		  struct btrfs_ioctl_balance_args *bargs)
 {
 	struct btrfs_fs_info *fs_info = bctl->fs_info;
+	u64 meta_target, data_target;
 	u64 allowed;
 	int mixed = 0;
 	int ret;
@@ -3861,11 +3862,16 @@ int btrfs_balance(struct btrfs_balance_c
 		}
 	} while (read_seqretry(&fs_info->profiles_lock, seq));
 
-	if (btrfs_get_num_tolerated_disk_barrier_failures(bctl->meta.target) <
-		btrfs_get_num_tolerated_disk_barrier_failures(bctl->data.target)) {
+	/* if we're not converting, the target field is uninitialized */
+	meta_target = (bctl->meta.flags & BTRFS_BALANCE_ARGS_CONVERT) ?
+		bctl->meta.target : fs_info->avail_metadata_alloc_bits;
+	data_target = (bctl->data.flags & BTRFS_BALANCE_ARGS_CONVERT) ?
+		bctl->data.target : fs_info->avail_data_alloc_bits;
+	if (btrfs_get_num_tolerated_disk_barrier_failures(meta_target) <
+		btrfs_get_num_tolerated_disk_barrier_failures(data_target)) {
 		btrfs_warn(fs_info,
 			   "metadata profile 0x%llx has lower redundancy than data profile 0x%llx",
-			   bctl->meta.target, bctl->data.target);
+			   meta_target, data_target);
 	}
 
 	if (bctl->sys.flags & BTRFS_BALANCE_ARGS_CONVERT) {

[PATCH 4.9 024/177] ASoC: Intel: Atom: update Thinkpad 10 quirk

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>


[ Upstream commit beb5989a8c6c6867b4e873cca2a66d31f977368f ]

There are multiple skews of the same Lenovo audio hardware
based on the Realtek RT5670 codec.

Manufacturer: LENOVO
        Product Name: 20C1CTO1WW
        Version: ThinkPad 10

Manufacturer: LENOVO
	Product Name: 20C3001VHH
	Version: ThinkPad 10

Manufacturer: LENOVO
	Product Name: 20C10024GE
	Version: ThinkPad Tablet B

Manufacturer: LENOVO
	Product Name: 20359
	Version: Lenovo Miix 2 10

For all these devices, the same quirk is used to force
the machine driver to be based on RT5670 instead of RT5640
as indicated by the BIOS.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691
Tested-by: Nicole Faerber <nicole.faerber@dpin.de>
Tested-by: Viacheslav Ostroukh <v.dev@ostroukh.me>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/intel/atom/sst/sst_acpi.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

--- a/sound/soc/intel/atom/sst/sst_acpi.c
+++ b/sound/soc/intel/atom/sst/sst_acpi.c
@@ -420,7 +420,21 @@ static const struct dmi_system_id byt_ta
 		.callback = byt_thinkpad10_quirk_cb,
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "20C3001VHH"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 10"),
+		},
+	},
+	{
+		.callback = byt_thinkpad10_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Tablet B"),
+		},
+	},
+	{
+		.callback = byt_thinkpad10_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Miix 2 10"),
 		},
 	},
 	{ }

[PATCH 4.9 025/177] tools/testing/nvdimm: fix nfit_test shutdown crash

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dan.j.williams@intel.com>


[ Upstream commit 8b06b884cd98f7ec8b5028680b99fabfb7b3e192 ]

Keep the nfit_test instances alive until after nfit_test_teardown(), as
we may be doing resource lookups until the final un-registrations have
completed. This fixes crashes of the form.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
 IP: __release_resource+0x12/0x90
 Call Trace:
  remove_resource+0x23/0x40
  __wrap_remove_resource+0x29/0x30 [nfit_test_iomap]
  acpi_nfit_remove_resource+0xe/0x10 [nfit]
  devm_action_release+0xf/0x20
  release_nodes+0x16d/0x2b0
  devres_release_all+0x3c/0x60
  device_release+0x21/0x90
  kobject_release+0x6a/0x170
  kobject_put+0x2f/0x60
  put_device+0x17/0x20
  platform_device_unregister+0x20/0x30
  nfit_test_exit+0x36/0x960 [nfit_test]

Reported-by: Linda Knippers <linda.knippers@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/nvdimm/test/nfit.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/tools/testing/nvdimm/test/nfit.c
+++ b/tools/testing/nvdimm/test/nfit.c
@@ -1908,6 +1908,7 @@ static __init int nfit_test_init(void)
 			put_device(&pdev->dev);
 			goto err_register;
 		}
+		get_device(&pdev->dev);
 
 		rc = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
 		if (rc)
@@ -1926,6 +1927,10 @@ static __init int nfit_test_init(void)
 		if (instances[i])
 			platform_device_unregister(&instances[i]->pdev);
 	nfit_test_teardown();
+	for (i = 0; i < NUM_NFITS; i++)
+		if (instances[i])
+			put_device(&instances[i]->pdev.dev);
+
 	return rc;
 }
 
@@ -1933,10 +1938,13 @@ static __exit void nfit_test_exit(void)
 {
 	int i;
 
-	platform_driver_unregister(&nfit_test_driver);
 	for (i = 0; i < NUM_NFITS; i++)
 		platform_device_unregister(&instances[i]->pdev);
+	platform_driver_unregister(&nfit_test_driver);
 	nfit_test_teardown();
+
+	for (i = 0; i < NUM_NFITS; i++)
+		put_device(&instances[i]->pdev.dev);
 	class_destroy(nfit_test_dimm);
 }
 

[PATCH 4.9 026/177] spi: dw: Disable clock after unregistering the host

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Vasut <marex@denx.de>


[ Upstream commit 400c18e3dc86e04ef5afec9b86a8586ca629b9e9 ]

The dw_mmio driver disables the block clock before unregistering
the host. The code unregistering the host may access the SPI block
registers. If register access happens with block clock disabled,
this may lead to a bus hang. Disable the clock after unregistering
the host to prevent such situation.

This bug was observed on Altera Cyclone V SoC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/spi/spi-dw-mmio.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -115,8 +115,8 @@ static int dw_spi_mmio_remove(struct pla
 {
 	struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(dwsmmio->clk);
 	dw_spi_remove_host(&dwsmmio->dws);
+	clk_disable_unprepare(dwsmmio->clk);
 
 	return 0;
 }

[PATCH 4.9 027/177] powerpc/64s: Remove SAO feature from Power9 DD1

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Piggin <npiggin@gmail.com>


[ Upstream commit ca80d5d0a8175c9be04cfbce24180b8f5e0a744b ]

Power9 DD1 does not implement SAO. Although it's not widely used, its presence
or absence is visible to user space via arch_validate_prot() so it's moderately
important that we get the value right.

Fixes: 7dccfbc325bb ("powerpc/book3s: Add a cpu table entry for different POWER9 revs")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/include/asm/cputable.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -474,7 +474,8 @@ enum {
 	    CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
 	    CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \
 	    CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP | CPU_FTR_ARCH_300)
-#define CPU_FTRS_POWER9_DD1 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD1)
+#define CPU_FTRS_POWER9_DD1 ((CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD1) & \
+			     (~CPU_FTR_SAO))
 #define CPU_FTRS_CELL	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \

[PATCH 4.9 028/177] ath: Fix updating radar flags for coutry code India

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>


[ Upstream commit c0c345d4cacc6a1f39d4856f37dcf6e34f51a5e4 ]

As per latest regulatory update for India, channel 52, 56, 60, 64
is no longer restricted to DFS. Enabling DFS/no infra flags in driver
results in applying all DFS related restrictions (like doing CAC etc
before this channel moves to 'available state') for these channels
even though the country code is programmed as 'India' in he hardware,
fix this by relaxing the frequency range while applying RADAR flags
only if the country code is programmed to India. If the frequency range
needs to modified based on different country code, ath_is_radar_freq
can be extended/modified dynamically.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/ath/regd.c |   19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -254,8 +254,12 @@ bool ath_is_49ghz_allowed(u16 regdomain)
 EXPORT_SYMBOL(ath_is_49ghz_allowed);
 
 /* Frequency is one where radar detection is required */
-static bool ath_is_radar_freq(u16 center_freq)
+static bool ath_is_radar_freq(u16 center_freq,
+			      struct ath_regulatory *reg)
+
 {
+	if (reg->country_code == CTRY_INDIA)
+		return (center_freq >= 5500 && center_freq <= 5700);
 	return (center_freq >= 5260 && center_freq <= 5700);
 }
 
@@ -306,7 +310,7 @@ __ath_reg_apply_beaconing_flags(struct w
 				enum nl80211_reg_initiator initiator,
 				struct ieee80211_channel *ch)
 {
-	if (ath_is_radar_freq(ch->center_freq) ||
+	if (ath_is_radar_freq(ch->center_freq, reg) ||
 	    (ch->flags & IEEE80211_CHAN_RADAR))
 		return;
 
@@ -395,8 +399,9 @@ ath_reg_apply_ir_flags(struct wiphy *wip
 	}
 }
 
-/* Always apply Radar/DFS rules on freq range 5260 MHz - 5700 MHz */
-static void ath_reg_apply_radar_flags(struct wiphy *wiphy)
+/* Always apply Radar/DFS rules on freq range 5500 MHz - 5700 MHz */
+static void ath_reg_apply_radar_flags(struct wiphy *wiphy,
+				      struct ath_regulatory *reg)
 {
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_channel *ch;
@@ -409,7 +414,7 @@ static void ath_reg_apply_radar_flags(st
 
 	for (i = 0; i < sband->n_channels; i++) {
 		ch = &sband->channels[i];
-		if (!ath_is_radar_freq(ch->center_freq))
+		if (!ath_is_radar_freq(ch->center_freq, reg))
 			continue;
 		/* We always enable radar detection/DFS on this
 		 * frequency range. Additionally we also apply on
@@ -505,7 +510,7 @@ void ath_reg_notifier_apply(struct wiphy
 	struct ath_common *common = container_of(reg, struct ath_common,
 						 regulatory);
 	/* We always apply this */
-	ath_reg_apply_radar_flags(wiphy);
+	ath_reg_apply_radar_flags(wiphy, reg);
 
 	/*
 	 * This would happen when we have sent a custom regulatory request
@@ -653,7 +658,7 @@ ath_regd_init_wiphy(struct ath_regulator
 	}
 
 	wiphy_apply_custom_regulatory(wiphy, regd);
-	ath_reg_apply_radar_flags(wiphy);
+	ath_reg_apply_radar_flags(wiphy, reg);
 	ath_reg_apply_world_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER, reg);
 	return 0;
 }

[PATCH 4.9 029/177] clk: ns2: Correct SDIO bits

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>


[ Upstream commit 8973aa4aecac223548366ca81818309a0f0efa6d ]

Corrected the bits for power and iso.

Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: f7225a83 ("clk: ns2: add clock support for Broadcom Northstar 2 SoC")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/bcm/clk-ns2.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clk/bcm/clk-ns2.c
+++ b/drivers/clk/bcm/clk-ns2.c
@@ -103,7 +103,7 @@ CLK_OF_DECLARE(ns2_genpll_src_clk, "brcm
 
 static const struct iproc_pll_ctrl genpll_sw = {
 	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
-	.aon = AON_VAL(0x0, 2, 9, 8),
+	.aon = AON_VAL(0x0, 1, 11, 10),
 	.reset = RESET_VAL(0x4, 2, 1),
 	.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),
 	.ndiv_int = REG_VAL(0x8, 4, 10),

[PATCH 4.9 030/177] iwlwifi: split the handler and the wake parts of the notification infra

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>


[ Upstream commit 2220fb2960b72915e7fd9da640a4695dceff238c ]

The notification infrastructure (iwl_notification_wait_*
functions) allows to wait until a list of notifications
will come up from the firmware and to run a special handler
(notif_wait handler) when those are received.

The operation mode notifies the notification infrastructure
about any Rx being received by the mean of
iwl_notification_wait_notify() which will do two things:
1) call the notif_wait handler
2) wakeup the thread that was waiting for the notification

Typically, only after those two steps happened, the
operation mode will run its own handler for the notification
that was received from the firmware. This means that the
thread that was waiting for that notification can be
running before the operation mode's handler was called.

When the operation mode's handler is ASYNC, things get even
worse since the thread that was waiting for the
notification isn't even guaranteed that the ASYNC callback
was added to async_handlers_list before it starts to run.
This means that even calling
iwl_mvm_wait_for_async_handlers() can't guarantee that
absolutely everything related to that notification has run.
The following can happen:

Thread sending the command        Operation mode's Rx path
--------------------------        ------------------------
iwl_init_notification_wait()
iwl_mvm_send_cmd()
                                  iwl_mvm_rx_common()
                                  iwl_notification_wait_notify()
iwl_mvm_wait_for_async_handlers()
// Possibly free some data
// structure
                                  list_add_tail(async_handlers_list);
                                  schedule_work(async_handlers_wk);
                                  // Access the freed structure

Split the 'run notif_wait's handler' and the 'wake up the
thread' parts to fix this. This allows the operation mode
to do the following:

Thread sending the command        Operation mode's Rx path
--------------------------        ------------------------
iwl_init_notification_wait()
iwl_mvm_send_cmd()
                                  iwl_mvm_rx_common()
                                  iwl_notification_wait()
                                  // Will run the notif_wait's handler
                                  list_add_tail(async_handlers_list);
                                  schedule_work(async_handlers_wk);
                                  iwl_notification_notify()
iwl_mvm_wait_for_async_handlers()

This way, the waiter is guaranteed that all the handlers
have been run (if SYNC), or at least enqueued (if ASYNC)
by the time it wakes up.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-notif-wait.c |   10 +++-----
 drivers/net/wireless/intel/iwlwifi/iwl-notif-wait.h |   25 ++++++++++++++++----
 2 files changed, 24 insertions(+), 11 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/iwl-notif-wait.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-notif-wait.c
@@ -76,8 +76,8 @@ void iwl_notification_wait_init(struct i
 }
 IWL_EXPORT_SYMBOL(iwl_notification_wait_init);
 
-void iwl_notification_wait_notify(struct iwl_notif_wait_data *notif_wait,
-				  struct iwl_rx_packet *pkt)
+bool iwl_notification_wait(struct iwl_notif_wait_data *notif_wait,
+			   struct iwl_rx_packet *pkt)
 {
 	bool triggered = false;
 
@@ -118,13 +118,11 @@ void iwl_notification_wait_notify(struct
 			}
 		}
 		spin_unlock(&notif_wait->notif_wait_lock);
-
 	}
 
-	if (triggered)
-		wake_up_all(&notif_wait->notif_waitq);
+	return triggered;
 }
-IWL_EXPORT_SYMBOL(iwl_notification_wait_notify);
+IWL_EXPORT_SYMBOL(iwl_notification_wait);
 
 void iwl_abort_notification_waits(struct iwl_notif_wait_data *notif_wait)
 {
--- a/drivers/net/wireless/intel/iwlwifi/iwl-notif-wait.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-notif-wait.h
@@ -6,7 +6,7 @@
  * GPL LICENSE SUMMARY
  *
  * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2015 Intel Deutschland GmbH
+ * Copyright(c) 2015 - 2017 Intel Deutschland GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
@@ -32,6 +32,7 @@
  * BSD LICENSE
  *
  * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2015 - 2017 Intel Deutschland GmbH
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -89,10 +90,10 @@ struct iwl_notif_wait_data {
  *
  * This structure is not used directly, to wait for a
  * notification declare it on the stack, and call
- * iwlagn_init_notification_wait() with appropriate
+ * iwl_init_notification_wait() with appropriate
  * parameters. Then do whatever will cause the ucode
  * to notify the driver, and to wait for that then
- * call iwlagn_wait_notification().
+ * call iwl_wait_notification().
  *
  * Each notification is one-shot. If at some point we
  * need to support multi-shot notifications (which
@@ -114,10 +115,24 @@ struct iwl_notification_wait {
 
 /* caller functions */
 void iwl_notification_wait_init(struct iwl_notif_wait_data *notif_data);
-void iwl_notification_wait_notify(struct iwl_notif_wait_data *notif_data,
-				  struct iwl_rx_packet *pkt);
+bool iwl_notification_wait(struct iwl_notif_wait_data *notif_data,
+			   struct iwl_rx_packet *pkt);
 void iwl_abort_notification_waits(struct iwl_notif_wait_data *notif_data);
 
+static inline void
+iwl_notification_notify(struct iwl_notif_wait_data *notif_data)
+{
+	wake_up_all(&notif_data->notif_waitq);
+}
+
+static inline void
+iwl_notification_wait_notify(struct iwl_notif_wait_data *notif_data,
+			     struct iwl_rx_packet *pkt)
+{
+	if (iwl_notification_wait(notif_data, pkt))
+		iwl_notification_notify(notif_data);
+}
+
 /* user functions */
 void __acquires(wait_entry)
 iwl_init_notification_wait(struct iwl_notif_wait_data *notif_data,

[PATCH 4.9 031/177] iwlwifi: a000: fix memory offsets and lengths

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liad Kaufman <liad.kaufman@intel.com>


[ Upstream commit f4d1047914ea05e0f8393944da18f6ee5dad24c4 ]

Memory offsets and lengths for A000 HW is different
than currently specified.

Fixes: e34d975e40ff ("iwlwifi: Add a000 HW family support")
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-a000.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/iwl-a000.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-a000.c
@@ -65,12 +65,12 @@
 #define IWL_A000_TX_POWER_VERSION	0xffff /* meaningless */
 
 /* Memory offsets and lengths */
-#define IWL_A000_DCCM_OFFSET		0x800000
-#define IWL_A000_DCCM_LEN		0x18000
+#define IWL_A000_DCCM_OFFSET		0x800000 /* LMAC1 */
+#define IWL_A000_DCCM_LEN		0x10000 /* LMAC1 */
 #define IWL_A000_DCCM2_OFFSET		0x880000
 #define IWL_A000_DCCM2_LEN		0x8000
 #define IWL_A000_SMEM_OFFSET		0x400000
-#define IWL_A000_SMEM_LEN		0x68000
+#define IWL_A000_SMEM_LEN		0xD0000
 
 #define IWL_A000_FW_PRE "iwlwifi-Qu-a0-jf-b0-"
 #define IWL_A000_MODULE_FIRMWARE(api) \

[PATCH 4.9 032/177] scsi: virtio_scsi: Always try to read VPD pages

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Gibson <david@gibson.dropbear.id.au>


[ Upstream commit 25d1d50e23275e141e3a3fe06c25a99f4c4bf4e0 ]

Passed through SCSI targets may have transfer limits which come from the
host SCSI controller or something on the host side other than the target
itself.

To make this work properly, the hypervisor can adjust the target's VPD
information to advertise these limits.  But for that to work, the guest
has to look at the VPD pages, which we won't do by default if it is an
SPC-2 device, even if it does actually support it.

This adds a workaround to address this, forcing devices attached to a
virtio-scsi controller to always check the VPD pages.  This is modelled
on a similar workaround for the storvsc (Hyper-V) SCSI controller,
although that exists for slightly different reasons.

A specific case which causes this is a volume from IBM's IPR RAID
controller (which presents as an SPC-2 device, although it does support
VPD) passed through with qemu's 'scsi-block' device.

[mkp: fixed typo]

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/virtio_scsi.c |   24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -28,6 +28,7 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_tcq.h>
+#include <scsi/scsi_devinfo.h>
 #include <linux/seqlock.h>
 
 #define VIRTIO_SCSI_MEMPOOL_SZ 64
@@ -705,6 +706,28 @@ static int virtscsi_device_reset(struct
 	return virtscsi_tmf(vscsi, cmd);
 }
 
+static int virtscsi_device_alloc(struct scsi_device *sdevice)
+{
+	/*
+	 * Passed through SCSI targets (e.g. with qemu's 'scsi-block')
+	 * may have transfer limits which come from the host SCSI
+	 * controller or something on the host side other than the
+	 * target itself.
+	 *
+	 * To make this work properly, the hypervisor can adjust the
+	 * target's VPD information to advertise these limits.  But
+	 * for that to work, the guest has to look at the VPD pages,
+	 * which we won't do by default if it is an SPC-2 device, even
+	 * if it does actually support it.
+	 *
+	 * So, set the blist to always try to read the VPD pages.
+	 */
+	sdevice->sdev_bflags = BLIST_TRY_VPD_PAGES;
+
+	return 0;
+}
+
+
 /**
  * virtscsi_change_queue_depth() - Change a virtscsi target's queue depth
  * @sdev:	Virtscsi target whose queue depth to change
@@ -776,6 +799,7 @@ static struct scsi_host_template virtscs
 	.change_queue_depth = virtscsi_change_queue_depth,
 	.eh_abort_handler = virtscsi_abort,
 	.eh_device_reset_handler = virtscsi_device_reset,
+	.slave_alloc = virtscsi_device_alloc,
 
 	.can_queue = 1024,
 	.dma_boundary = UINT_MAX,

[PATCH 4.9 033/177] KVM: PPC: Book3S PR: Exit KVM on failed mapping

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Kardashevskiy <aik@ozlabs.ru>


[ Upstream commit bd9166ffe624000140fc6b606b256df01fc0d060 ]

At the moment kvmppc_mmu_map_page() returns -1 if
mmu_hash_ops.hpte_insert() fails for any reason so the page fault handler
resumes the guest and it faults on the same address again.

This adds distinction to kvmppc_mmu_map_page() to return -EIO if
mmu_hash_ops.hpte_insert() failed for a reason other than full pteg.
At the moment only pSeries_lpar_hpte_insert() returns -2 if
plpar_pte_enter() failed with a code other than H_PTEG_FULL.
Other mmu_hash_ops.hpte_insert() instances can only fail with
-1 "full pteg".

With this change, if PR KVM fails to update HPT, it can signal
the userspace about this instead of returning to guest and having
the very same page fault over and over again.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/kvm/book3s_64_mmu_host.c |    5 ++++-
 arch/powerpc/kvm/book3s_pr.c          |    6 +++++-
 2 files changed, 9 insertions(+), 2 deletions(-)

--- a/arch/powerpc/kvm/book3s_64_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -177,12 +177,15 @@ map_again:
 	ret = mmu_hash_ops.hpte_insert(hpteg, vpn, hpaddr, rflags, vflags,
 				       hpsize, hpsize, MMU_SEGSIZE_256M);
 
-	if (ret < 0) {
+	if (ret == -1) {
 		/* If we couldn't map a primary PTE, try a secondary */
 		hash = ~hash;
 		vflags ^= HPTE_V_SECONDARY;
 		attempt++;
 		goto map_again;
+	} else if (ret < 0) {
+		r = -EIO;
+		goto out_unlock;
 	} else {
 		trace_kvm_book3s_64_mmu_map(rflags, hpteg,
 					    vpn, hpaddr, orig_pte);
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -627,7 +627,11 @@ int kvmppc_handle_pagefault(struct kvm_r
 			kvmppc_mmu_unmap_page(vcpu, &pte);
 		}
 		/* The guest's PTE is not mapped yet. Map on the host */
-		kvmppc_mmu_map_page(vcpu, &pte, iswrite);
+		if (kvmppc_mmu_map_page(vcpu, &pte, iswrite) == -EIO) {
+			/* Exit KVM if mapping failed */
+			run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+			return RESUME_HOST;
+		}
 		if (data)
 			vcpu->stat.sp_storage++;
 		else if (vcpu->arch.mmu.is_dcbz32(vcpu) &&

[PATCH 4.9 034/177] mwifiex: dont leak chan_stats on reset

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian Norris <briannorris@chromium.org>


[ Upstream commit fb9e67bee3ab7111513130c516ffe378d885c0d0 ]

'chan_stats' is (re)allocated in _mwifiex_fw_dpc() ->
mwifiex_init_channel_scan_gap(), which is called whenever the device is
initialized -- at probe or at reset.

But we only free it in we completely unregister the adapter, meaning we
leak a copy of it during every reset.

Let's free it in the shutdown / removal paths instead (and in the
error-handling path), to avoid the leak.

Ideally, we can eventually unify much of mwifiex_shutdown_sw() and
mwifiex_remove_card() (way too much copy-and-paste) to reduce the burden
on bugfixes like this. But that's work for tomorrow.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/marvell/mwifiex/main.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/marvell/mwifiex/main.c
+++ b/drivers/net/wireless/marvell/mwifiex/main.c
@@ -146,7 +146,6 @@ static int mwifiex_unregister(struct mwi
 
 	kfree(adapter->regd);
 
-	vfree(adapter->chan_stats);
 	kfree(adapter);
 	return 0;
 }
@@ -636,6 +635,7 @@ static void mwifiex_fw_dpc(const struct
 	goto done;
 
 err_add_intf:
+	vfree(adapter->chan_stats);
 	wiphy_unregister(adapter->wiphy);
 	wiphy_free(adapter->wiphy);
 err_init_fw:
@@ -1429,6 +1429,7 @@ mwifiex_shutdown_sw(struct mwifiex_adapt
 			mwifiex_del_virtual_intf(adapter->wiphy, &priv->wdev);
 		rtnl_unlock();
 	}
+	vfree(adapter->chan_stats);
 
 	up(sem);
 exit_sem_err:
@@ -1729,6 +1730,7 @@ int mwifiex_remove_card(struct mwifiex_a
 			mwifiex_del_virtual_intf(adapter->wiphy, &priv->wdev);
 		rtnl_unlock();
 	}
+	vfree(adapter->chan_stats);
 
 	wiphy_unregister(adapter->wiphy);
 	wiphy_free(adapter->wiphy);

[PATCH 4.9 035/177] x86/reboot: Turn off KVM when halting a CPU

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tiantian Feng <fengtiantian@huawei.com>


[ Upstream commit fba4f472b33aa81ca1836f57d005455261e9126f ]

A CPU in VMX root mode will ignore INIT signals and will fail to bring
up the APs after reboot.  Therefore, on a panic we disable VMX on all
CPUs before rebooting or triggering kdump.

Do this when halting the machine as well, in case a firmware-level reboot
does not perform a cold reset for all processors.  Without doing this,
rebooting the host may hang.

Signed-off-by: Tiantian Feng <fengtiantian@huawei.com>
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
[ Rewritten commit message. ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/20170419161839.30550-1-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/smp.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -33,6 +33,7 @@
 #include <asm/mce.h>
 #include <asm/trace/irq_vectors.h>
 #include <asm/kexec.h>
+#include <asm/virtext.h>
 
 /*
  *	Some notes on x86 processor bugs affecting SMP operation:
@@ -162,6 +163,7 @@ static int smp_stop_nmi_callback(unsigne
 	if (raw_smp_processor_id() == atomic_read(&stopping_cpu))
 		return NMI_HANDLED;
 
+	cpu_emergency_vmxoff();
 	stop_this_cpu(NULL);
 
 	return NMI_HANDLED;
@@ -174,6 +176,7 @@ static int smp_stop_nmi_callback(unsigne
 asmlinkage __visible void smp_reboot_interrupt(void)
 {
 	ipi_entering_ack_irq();
+	cpu_emergency_vmxoff();
 	stop_this_cpu(NULL);
 	irq_exit();
 }

[PATCH 4.9 036/177] ARM: 8668/1: ftrace: Fix dynamic ftrace with DEBUG_RODATA and !FRAME_POINTER

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Abel Vesa <abelvesa@linux.com>


[ Upstream commit 6f05d0761af612e04572ba4d65b4c0274a88444f ]

The support for dynamic ftrace with CONFIG_DEBUG_RODATA involves
overriding the weak arch_ftrace_update_code() with a variant which makes
the kernel text writable around the patching.

This override was however added under the CONFIG_OLD_MCOUNT ifdef, and
CONFIG_OLD_MCOUNT is only enabled if frame pointers are enabled.

This leads to non-functional dynamic ftrace (ftrace triggers a
WARN_ON()) when CONFIG_DEBUG_RODATA is enabled and CONFIG_FRAME_POINTER
is not.

Move the override out of that ifdef and into the CONFIG_DYNAMIC_FTRACE
ifdef where it belongs.

Fixes: 80d6b0c2eed2a ("ARM: mm: allow text and rodata sections to be read-only")
Suggested-by: Nicolai Stange <nicstange@gmail.com>
Suggested-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Abel Vesa <abelvesa@gmail.com>
Acked-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/kernel/ftrace.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -29,11 +29,6 @@
 #endif
 
 #ifdef CONFIG_DYNAMIC_FTRACE
-#ifdef CONFIG_OLD_MCOUNT
-#define OLD_MCOUNT_ADDR	((unsigned long) mcount)
-#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old)
-
-#define	OLD_NOP		0xe1a00000	/* mov r0, r0 */
 
 static int __ftrace_modify_code(void *data)
 {
@@ -51,6 +46,12 @@ void arch_ftrace_update_code(int command
 	stop_machine(__ftrace_modify_code, &command, NULL);
 }
 
+#ifdef CONFIG_OLD_MCOUNT
+#define OLD_MCOUNT_ADDR	((unsigned long) mcount)
+#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old)
+
+#define	OLD_NOP		0xe1a00000	/* mov r0, r0 */
+
 static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
 {
 	return rec->arch.old_mcount ? OLD_NOP : NOP;

[PATCH 4.9 037/177] irqchip/mips-gic: Separate IPI reservation & usage tracking

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Burton <paul.burton@imgtec.com>


[ Upstream commit f8dcd9e81797ae24acc44c84f0eb3b9e6cee9791 ]

Since commit 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy
domain") introduced the GIC IPI IRQ domain we have tracked both
reservation of interrupts & their use with a single bitmap - ipi_resrv.
If an interrupt is reserved for use as an IPI but not actually in use
then the appropriate bit is set in ipi_resrv. If an interrupt is either
not reserved for use as an IPI or has been allocated as one then the
appropriate bit is clear in ipi_resrv.

Unfortunately this means that checking whether a bit is set in ipi_resrv
to prevent IPI interrupts being allocated for use with a device is
broken, because if the interrupt has been allocated as an IPI first then
its bit will be clear.

Fix this by separating the tracking of IPI reservation & usage,
introducing a separate ipi_available bitmap for the latter. This means
that ipi_resrv will now always have bits set corresponding to all
interrupts reserved for use as IPIs, whether or not they have been
allocated yet, and therefore that checking it when allocating device
interrupts works as expected.

Fixes: 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Link: http://lkml.kernel.org/r/1492679256-14513-2-git-send-email-matt.redfearn@imgtec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/irqchip/irq-mips-gic.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/irqchip/irq-mips-gic.c
+++ b/drivers/irqchip/irq-mips-gic.c
@@ -55,6 +55,7 @@ static unsigned int gic_cpu_pin;
 static unsigned int timer_cpu_pin;
 static struct irq_chip gic_level_irq_controller, gic_edge_irq_controller;
 DECLARE_BITMAP(ipi_resrv, GIC_MAX_INTRS);
+DECLARE_BITMAP(ipi_available, GIC_MAX_INTRS);
 
 static void __gic_irq_dispatch(void);
 
@@ -746,17 +747,17 @@ static int gic_irq_domain_alloc(struct i
 
 		return gic_setup_dev_chip(d, virq, spec->hwirq);
 	} else {
-		base_hwirq = find_first_bit(ipi_resrv, gic_shared_intrs);
+		base_hwirq = find_first_bit(ipi_available, gic_shared_intrs);
 		if (base_hwirq == gic_shared_intrs) {
 			return -ENOMEM;
 		}
 
 		/* check that we have enough space */
 		for (i = base_hwirq; i < nr_irqs; i++) {
-			if (!test_bit(i, ipi_resrv))
+			if (!test_bit(i, ipi_available))
 				return -EBUSY;
 		}
-		bitmap_clear(ipi_resrv, base_hwirq, nr_irqs);
+		bitmap_clear(ipi_available, base_hwirq, nr_irqs);
 
 		/* map the hwirq for each cpu consecutively */
 		i = 0;
@@ -787,7 +788,7 @@ static int gic_irq_domain_alloc(struct i
 
 	return 0;
 error:
-	bitmap_set(ipi_resrv, base_hwirq, nr_irqs);
+	bitmap_set(ipi_available, base_hwirq, nr_irqs);
 	return ret;
 }
 
@@ -802,7 +803,7 @@ void gic_irq_domain_free(struct irq_doma
 		return;
 
 	base_hwirq = GIC_HWIRQ_TO_SHARED(irqd_to_hwirq(data));
-	bitmap_set(ipi_resrv, base_hwirq, nr_irqs);
+	bitmap_set(ipi_available, base_hwirq, nr_irqs);
 }
 
 int gic_irq_domain_match(struct irq_domain *d, struct device_node *node,
@@ -1066,6 +1067,7 @@ static void __init __gic_init(unsigned l
 			   2 * gic_vpes);
 	}
 
+	bitmap_copy(ipi_available, ipi_resrv, GIC_MAX_INTRS);
 	gic_basic_init();
 }
 

[PATCH 4.9 038/177] iommu/omap: Register driver before setting IOMMU ops

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Suman Anna <s-anna@ti.com>


[ Upstream commit abaa7e5b054aae567861628b74dbc7fbf8ed79e8 ]

Move the registration of the OMAP IOMMU platform driver before
setting the IOMMU callbacks on the platform bus. This causes
the IOMMU devices to be probed first before the .add_device()
callback is invoked for all registered devices, and allows
the iommu_group support to be added to the OMAP IOMMU driver.

While at this, also check for the return status from bus_set_iommu.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/omap-iommu.c |   21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

--- a/drivers/iommu/omap-iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -1299,6 +1299,7 @@ static int __init omap_iommu_init(void)
 	const unsigned long flags = SLAB_HWCACHE_ALIGN;
 	size_t align = 1 << 10; /* L2 pagetable alignement */
 	struct device_node *np;
+	int ret;
 
 	np = of_find_matching_node(NULL, omap_iommu_of_match);
 	if (!np)
@@ -1312,11 +1313,25 @@ static int __init omap_iommu_init(void)
 		return -ENOMEM;
 	iopte_cachep = p;
 
-	bus_set_iommu(&platform_bus_type, &omap_iommu_ops);
-
 	omap_iommu_debugfs_init();
 
-	return platform_driver_register(&omap_iommu_driver);
+	ret = platform_driver_register(&omap_iommu_driver);
+	if (ret) {
+		pr_err("%s: failed to register driver\n", __func__);
+		goto fail_driver;
+	}
+
+	ret = bus_set_iommu(&platform_bus_type, &omap_iommu_ops);
+	if (ret)
+		goto fail_bus;
+
+	return 0;
+
+fail_bus:
+	platform_driver_unregister(&omap_iommu_driver);
+fail_driver:
+	kmem_cache_destroy(iopte_cachep);
+	return ret;
 }
 subsys_initcall(omap_iommu_init);
 /* must be ready before omap3isp is probed */

[PATCH 4.9 039/177] md/raid10: wait up frozen array in handle_write_completed

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guoqing Jiang <gqjiang@suse.com>


[ Upstream commit cf25ae78fc50010f66b9be945017796da34c434d ]

Since nr_queued is changed, we need to call wake_up here
if the array is already frozen and waiting for condition
"nr_pending == nr_queued + extra" to be true.

And commit 824e47daddbf ("RAID1: avoid unnecessary spin
locks in I/O barrier code") which has already added the
wake_up for raid1.

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/raid10.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2704,6 +2704,11 @@ static void handle_write_completed(struc
 			list_add(&r10_bio->retry_list, &conf->bio_end_io_list);
 			conf->nr_queued++;
 			spin_unlock_irq(&conf->device_lock);
+			/*
+			 * In case freeze_array() is waiting for condition
+			 * nr_pending == nr_queued + extra to be true.
+			 */
+			wake_up(&conf->wait_barrier);
 			md_wakeup_thread(conf->mddev->thread);
 		} else {
 			if (test_bit(R10BIO_WriteError,

[PATCH 4.9 040/177] NFS: Fix missing pg_cleanup after nfs_pageio_cond_complete()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Coddington <bcodding@redhat.com>


[ Upstream commit 43b7d964ed30dbca5c83c90cb010985b429ec4f9 ]

Commit a7d42ddb3099727f58366fa006f850a219cce6c8 ("nfs: add mirroring
support to pgio layer") moved pg_cleanup out of the path when there was
non-sequental I/O that needed to be flushed.  The result is that for
layouts that have more than one layout segment per file, the pg_lseg is not
cleared, so we can end up hitting the WARN_ON_ONCE(req_start >= seg_end) in
pnfs_generic_pg_test since the pg_lseg will be pointing to that
previously-flushed layout segment.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: a7d42ddb3099 ("nfs: add mirroring support to pgio layer")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/pagelist.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -1262,8 +1262,10 @@ void nfs_pageio_cond_complete(struct nfs
 		mirror = &desc->pg_mirrors[midx];
 		if (!list_empty(&mirror->pg_list)) {
 			prev = nfs_list_entry(mirror->pg_list.prev);
-			if (index != prev->wb_index + 1)
-				nfs_pageio_complete_mirror(desc, midx);
+			if (index != prev->wb_index + 1) {
+				nfs_pageio_complete(desc);
+				break;
+			}
 		}
 	}
 }

[PATCH 4.9 041/177] tcp: remove poll() flakes with FastOpen

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>


[ Upstream commit 0f9fa831aecfc297b7b45d4f046759bcefcf87f0 ]

When using TCP FastOpen for an active session, we send one wakeup event
from tcp_finish_connect(), right before the data eventually contained in
the received SYNACK is queued to sk->sk_receive_queue.

This means that depending on machine load or luck, poll() users
might receive POLLOUT events instead of POLLIN|POLLOUT

To fix this, we need to move the call to sk->sk_state_change()
after the (optional) call to tcp_rcv_fastopen_synack()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_input.c |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -5606,10 +5606,6 @@ void tcp_finish_connect(struct sock *sk,
 	else
 		tp->pred_flags = 0;
 
-	if (!sock_flag(sk, SOCK_DEAD)) {
-		sk->sk_state_change(sk);
-		sk_wake_async(sk, SOCK_WAKE_IO, POLL_OUT);
-	}
 }
 
 static bool tcp_rcv_fastopen_synack(struct sock *sk, struct sk_buff *synack,
@@ -5678,6 +5674,7 @@ static int tcp_rcv_synsent_state_process
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct tcp_fastopen_cookie foc = { .len = -1 };
 	int saved_clamp = tp->rx_opt.mss_clamp;
+	bool fastopen_fail;
 
 	tcp_parse_options(skb, &tp->rx_opt, 0, &foc);
 	if (tp->rx_opt.saw_tstamp && tp->rx_opt.rcv_tsecr)
@@ -5781,10 +5778,15 @@ static int tcp_rcv_synsent_state_process
 
 		tcp_finish_connect(sk, skb);
 
-		if ((tp->syn_fastopen || tp->syn_data) &&
-		    tcp_rcv_fastopen_synack(sk, skb, &foc))
-			return -1;
+		fastopen_fail = (tp->syn_fastopen || tp->syn_data) &&
+				tcp_rcv_fastopen_synack(sk, skb, &foc);
 
+		if (!sock_flag(sk, SOCK_DEAD)) {
+			sk->sk_state_change(sk);
+			sk_wake_async(sk, SOCK_WAKE_IO, POLL_OUT);
+		}
+		if (fastopen_fail)
+			return -1;
 		if (sk->sk_write_pending ||
 		    icsk->icsk_accept_queue.rskq_defer_accept ||
 		    icsk->icsk_ack.pingpong) {

[PATCH 4.9 042/177] e1000e: fix timing for 82579 Gigabit Ethernet controller

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bernd Faust <berndfaust@gmail.com>


[ Upstream commit 5313eeccd2d7f486be4e5c7560e3e2be239ec8f7 ]

After an upgrade to Linux kernel v4.x the hardware timestamps of the
82579 Gigabit Ethernet Controller are different than expected.
The values that are being read are almost four times as big as before
the kernel upgrade.

The difference is that after the upgrade the driver sets the clock
frequency to 25MHz, where before the upgrade it was set to 96MHz. Intel
confirmed that the correct frequency for this network adapter is 96MHz.

Signed-off-by: Bernd Faust <berndfaust@gmail.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/e1000e/netdev.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3528,6 +3528,12 @@ s32 e1000e_get_base_timinca(struct e1000
 
 	switch (hw->mac.type) {
 	case e1000_pch2lan:
+		/* Stable 96MHz frequency */
+		incperiod = INCPERIOD_96MHz;
+		incvalue = INCVALUE_96MHz;
+		shift = INCVALUE_SHIFT_96MHz;
+		adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz;
+		break;
 	case e1000_pch_lpt:
 		if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
 			/* Stable 96MHz frequency */

[PATCH 4.9 043/177] ALSA: hda - Fix headset microphone detection for ASUS N551 and N751

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikhail Paulyshka <me@mixaill.tk>


[ Upstream commit fc7438b1eb12b6c93d7b7a62423779eb5dfc673c ]

Headset microphone does not work out of the box on ASUS Nx51
laptops. This patch fixes it.

Patch tested on Asus N551 laptop. Asus N751 part is not tested, but
according to [1] this laptop uses the same audiosystem.

1. https://bugzilla.kernel.org/show_bug.cgi?id=117781

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195437
Signed-off-by: Mikhail Paulyshka <me@mixaill.tk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6780,6 +6780,7 @@ enum {
 	ALC668_FIXUP_DELL_DISABLE_AAMIX,
 	ALC668_FIXUP_DELL_XPS13,
 	ALC662_FIXUP_ASUS_Nx50,
+	ALC668_FIXUP_ASUS_Nx51_HEADSET_MODE,
 	ALC668_FIXUP_ASUS_Nx51,
 	ALC891_FIXUP_HEADSET_MODE,
 	ALC891_FIXUP_DELL_MIC_NO_PRESENCE,
@@ -7031,14 +7032,21 @@ static const struct hda_fixup alc662_fix
 		.chained = true,
 		.chain_id = ALC662_FIXUP_BASS_1A
 	},
+	[ALC668_FIXUP_ASUS_Nx51_HEADSET_MODE] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc_fixup_headset_mode_alc668,
+		.chain_id = ALC662_FIXUP_BASS_CHMAP
+	},
 	[ALC668_FIXUP_ASUS_Nx51] = {
 		.type = HDA_FIXUP_PINS,
 		.v.pins = (const struct hda_pintbl[]) {
-			{0x1a, 0x90170151}, /* bass speaker */
+			{ 0x19, 0x03a1913d }, /* use as headphone mic, without its own jack detect */
+			{ 0x1a, 0x90170151 }, /* bass speaker */
+			{ 0x1b, 0x03a1113c }, /* use as headset mic, without its own jack detect */
 			{}
 		},
 		.chained = true,
-		.chain_id = ALC662_FIXUP_BASS_CHMAP,
+		.chain_id = ALC668_FIXUP_ASUS_Nx51_HEADSET_MODE,
 	},
 	[ALC891_FIXUP_HEADSET_MODE] = {
 		.type = HDA_FIXUP_FUNC,

[PATCH 4.9 044/177] IB/ipoib: Fix deadlock between ipoib_stop and mcast join flow

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Feras Daoud <ferasda@mellanox.com>


[ Upstream commit 3e31a490e01a6e67cbe9f6e1df2f3ff0fbf48972 ]

Before calling ipoib_stop, rtnl_lock should be taken, then
the flow clears the IPOIB_FLAG_ADMIN_UP and IPOIB_FLAG_OPER_UP
flags, and waits for mcast completion if IPOIB_MCAST_FLAG_BUSY
is set.

On the other hand, the flow of multicast join task initializes
a mcast completion, sets the IPOIB_MCAST_FLAG_BUSY and calls
ipoib_mcast_join. If IPOIB_FLAG_OPER_UP flag is not set, this
call returns EINVAL without setting the mcast completion and
leads to a deadlock.

    ipoib_stop                          |
        |                               |
    clear_bit(IPOIB_FLAG_ADMIN_UP)      |
        |                               |
    Context Switch                      |
        |                       ipoib_mcast_join_task
        |                               |
        |                       spin_lock_irq(lock)
        |                               |
        |                       init_completion(mcast)
        |                               |
        |                       set_bit(IPOIB_MCAST_FLAG_BUSY)
        |                               |
        |                       Context Switch
        |                               |
    clear_bit(IPOIB_FLAG_OPER_UP)       |
        |                               |
    spin_lock_irqsave(lock)             |
        |                               |
    Context Switch                      |
        |                       ipoib_mcast_join
        |                       return (-EINVAL)
        |                               |
        |                       spin_unlock_irq(lock)
        |                               |
        |                       Context Switch
        |                               |
    ipoib_mcast_dev_flush               |
    wait_for_completion(mcast)          |

ipoib_stop will wait for mcast completion for ever, and will
not release the rtnl_lock. As a result panic occurs with the
following trace:

    [13441.639268] Call Trace:
    [13441.640150]  [<ffffffff8168b579>] schedule+0x29/0x70
    [13441.641038]  [<ffffffff81688fc9>] schedule_timeout+0x239/0x2d0
    [13441.641914]  [<ffffffff810bc017>] ? complete+0x47/0x50
    [13441.642765]  [<ffffffff810a690d>] ? flush_workqueue_prep_pwqs+0x16d/0x200
    [13441.643580]  [<ffffffff8168b956>] wait_for_completion+0x116/0x170
    [13441.644434]  [<ffffffff810c4ec0>] ? wake_up_state+0x20/0x20
    [13441.645293]  [<ffffffffa05af170>] ipoib_mcast_dev_flush+0x150/0x190 [ib_ipoib]
    [13441.646159]  [<ffffffffa05ac967>] ipoib_ib_dev_down+0x37/0x60 [ib_ipoib]
    [13441.647013]  [<ffffffffa05a4805>] ipoib_stop+0x75/0x150 [ib_ipoib]

Fixes: 08bc327629cb ("IB/ipoib: fix for rare multicast join race condition")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/ulp/ipoib/ipoib_multicast.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -487,6 +487,9 @@ static int ipoib_mcast_join(struct net_d
 	    !test_bit(IPOIB_FLAG_OPER_UP, &priv->flags))
 		return -EINVAL;
 
+	init_completion(&mcast->done);
+	set_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags);
+
 	ipoib_dbg_mcast(priv, "joining MGID %pI6\n", mcast->mcmember.mgid.raw);
 
 	rec.mgid     = mcast->mcmember.mgid;
@@ -645,8 +648,6 @@ void ipoib_mcast_join_task(struct work_s
 			if (mcast->backoff == 1 ||
 			    time_after_eq(jiffies, mcast->delay_until)) {
 				/* Found the next unjoined group */
-				init_completion(&mcast->done);
-				set_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags);
 				if (ipoib_mcast_join(dev, mcast)) {
 					spin_unlock_irq(&priv->lock);
 					return;
@@ -666,11 +667,9 @@ out:
 		queue_delayed_work(priv->wq, &priv->mcast_task,
 				   delay_until - jiffies);
 	}
-	if (mcast) {
-		init_completion(&mcast->done);
-		set_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags);
+	if (mcast)
 		ipoib_mcast_join(dev, mcast);
-	}
+
 	spin_unlock_irq(&priv->lock);
 }
 

[PATCH 4.9 045/177] IB/ipoib: Update broadcast object if PKey value was changed in index 0

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Feras Daoud <ferasda@mellanox.com>


[ Upstream commit 9a9b8112699d78e7f317019b37f377e90023f3ed ]

Update the broadcast address in the priv->broadcast object when the
Pkey value changes in index 0, otherwise the multicast GID value will
keep the previous value of the PKey, and will not be updated.
This leads to interface state down because the interface will keep the
old PKey value.

For example, in SR-IOV environment, if the PF changes the value of PKey
index 0 for one of the VFs, then the VF receives PKey change event that
triggers heavy flush. This flush calls update_parent_pkey that update the
broadcast object and its relevant members. If in this case the multicast
GID will not be updated, the interface state will be down.

Fixes: c2904141696e ("IPoIB: Fix pkey change flow for virtualization environments")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/ulp/ipoib/ipoib_ib.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -974,6 +974,19 @@ static inline int update_parent_pkey(str
 		 */
 		priv->dev->broadcast[8] = priv->pkey >> 8;
 		priv->dev->broadcast[9] = priv->pkey & 0xff;
+
+		/*
+		 * Update the broadcast address in the priv->broadcast object,
+		 * in case it already exists, otherwise no one will do that.
+		 */
+		if (priv->broadcast) {
+			spin_lock_irq(&priv->lock);
+			memcpy(priv->broadcast->mcmember.mgid.raw,
+			       priv->dev->broadcast + 4,
+			sizeof(union ib_gid));
+			spin_unlock_irq(&priv->lock);
+		}
+
 		return 0;
 	}
 

[PATCH 4.9 046/177] HSI: ssi_protocol: double free in ssip_pn_xmit()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>


[ Upstream commit 3026050179a3a9a6f5c892c414b5e36ecf092081 ]

If skb_pad() fails then it frees skb and we don't need to free it again
at the end of the function.

Fixes: dc7bf5d7 ("HSI: Introduce driver for SSI Protocol")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hsi/clients/ssi_protocol.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/hsi/clients/ssi_protocol.c
+++ b/drivers/hsi/clients/ssi_protocol.c
@@ -989,7 +989,7 @@ static int ssip_pn_xmit(struct sk_buff *
 		goto drop;
 	/* Pad to 32-bits - FIXME: Revisit*/
 	if ((skb->len & 3) && skb_pad(skb, 4 - (skb->len & 3)))
-		goto drop;
+		goto inc_dropped;
 
 	/*
 	 * Modem sends Phonet messages over SSI with its own endianess...
@@ -1041,8 +1041,9 @@ static int ssip_pn_xmit(struct sk_buff *
 drop2:
 	hsi_free_msg(msg);
 drop:
-	dev->stats.tx_dropped++;
 	dev_kfree_skb(skb);
+inc_dropped:
+	dev->stats.tx_dropped++;
 
 	return 0;
 }

[PATCH 4.9 047/177] IB/mlx4: Take write semaphore when changing the vma struct

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maor Gottlieb <maorg@mellanox.com>


[ Upstream commit 22c3653d04bd0c67b75e99d85e0c0bdf83947df5 ]

When the driver disassociate user context, it changes the vma to
anonymous by setting the vm_ops to null and zap the vma ptes.

In order to avoid race in the kernel, we need to take write lock
before we change the vma entries.

Fixes: ae184ddeca5db ('IB/mlx4_ib: Disassociate support')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/mlx4/main.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -1168,7 +1168,7 @@ static void mlx4_ib_disassociate_ucontex
 	/* need to protect from a race on closing the vma as part of
 	 * mlx4_ib_vma_close().
 	 */
-	down_read(&owning_mm->mmap_sem);
+	down_write(&owning_mm->mmap_sem);
 	for (i = 0; i < HW_BAR_COUNT; i++) {
 		vma = context->hw_bar_info[i].vma;
 		if (!vma)
@@ -1186,7 +1186,7 @@ static void mlx4_ib_disassociate_ucontex
 		context->hw_bar_info[i].vma->vm_ops = NULL;
 	}
 
-	up_read(&owning_mm->mmap_sem);
+	up_write(&owning_mm->mmap_sem);
 	mmput(owning_mm);
 	put_task_struct(owning_process);
 }

[PATCH 4.9 048/177] IB/mlx4: Change vma from shared to private

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maor Gottlieb <maorg@mellanox.com>


[ Upstream commit ca37a664a8e4e9988b220988ceb4d79e3316f195 ]

Anonymous VMA (->vm_ops == NULL) cannot be shared, otherwise
it would lead to SIGBUS.

Remove the shared flags from the vma after we change it to be
anonymous.

This is easily reproduced by doing modprobe -r while running a
user-space application such as raw_ethernet_bw.

Fixes: ae184ddeca5db ('IB/mlx4_ib: Disassociate support')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/mlx4/main.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -1182,6 +1182,8 @@ static void mlx4_ib_disassociate_ucontex
 			BUG_ON(1);
 		}
 
+		context->hw_bar_info[i].vma->vm_flags &=
+			~(VM_SHARED | VM_MAYSHARE);
 		/* context going to be destroyed, should not access ops any more */
 		context->hw_bar_info[i].vma->vm_ops = NULL;
 	}

[PATCH 4.9 049/177] IB/mlx5: Take write semaphore when changing the vma struct

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maor Gottlieb <maorg@mellanox.com>


[ Upstream commit ecc7d83be3243835c9396a1a2fb8ce95f205207b ]

When the driver disassociate user context, it changes the vma to
anonymous by setting the vm_ops to null and zap the vma ptes.

In order to avoid race in the kernel, we need to take write lock
before we change the vma entries.

Fixes: 7c2344c3bbf97 ('IB/mlx5: Implements disassociate_ucontext API')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/mlx5/main.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -1313,7 +1313,7 @@ static void mlx5_ib_disassociate_ucontex
 	/* need to protect from a race on closing the vma as part of
 	 * mlx5_ib_vma_close.
 	 */
-	down_read(&owning_mm->mmap_sem);
+	down_write(&owning_mm->mmap_sem);
 	list_for_each_entry_safe(vma_private, n, &context->vma_private_list,
 				 list) {
 		vma = vma_private->vma;
@@ -1327,7 +1327,7 @@ static void mlx5_ib_disassociate_ucontex
 		list_del(&vma_private->list);
 		kfree(vma_private);
 	}
-	up_read(&owning_mm->mmap_sem);
+	up_write(&owning_mm->mmap_sem);
 	mmput(owning_mm);
 	put_task_struct(owning_process);
 }

[PATCH 4.9 050/177] IB/mlx5: Change vma from shared to private

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maor Gottlieb <maorg@mellanox.com>


[ Upstream commit 1377661298d2820d675553d186c31b6f46c140d0 ]

Anonymous VMA (->vm_ops == NULL) cannot be shared, otherwise
it would lead to SIGBUS.

Remove the shared flags from the vma after we change it to be
anonymous.

This is easily reproduced by doing modprobe -r while running a
user-space application such as raw_ethernet_bw.

Fixes: 7c2344c3bbf97 ('IB/mlx5: Implements disassociate_ucontext API')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/mlx5/main.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -1323,6 +1323,7 @@ static void mlx5_ib_disassociate_ucontex
 		/* context going to be destroyed, should
 		 * not access ops any more.
 		 */
+		vma->vm_flags &= ~(VM_SHARED | VM_MAYSHARE);
 		vma->vm_ops = NULL;
 		list_del(&vma_private->list);
 		kfree(vma_private);

[PATCH 4.9 051/177] IB/mlx5: Set correct SL in completion for RoCE

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Moni Shoua <monis@mellanox.com>


[ Upstream commit 12f8fedef2ec94c783f929126b20440a01512c14 ]

There is a difference when parsing a completion entry between Ethernet
and IB ports. When link layer is Ethernet the bits describe the type of
L3 header in the packet. In the case when link layer is Ethernet and VLAN
header is present the value of SL is equal to the 3 UP bits in the VLAN
header. If VLAN header is not present then the SL is undefined and consumer
of the completion should check if IB_WC_WITH_VLAN is set.

While that, this patch also fills the vlan_id field in the completion if
present.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/mlx5/cq.c |   19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

--- a/drivers/infiniband/hw/mlx5/cq.c
+++ b/drivers/infiniband/hw/mlx5/cq.c
@@ -172,6 +172,8 @@ static void handle_responder(struct ib_w
 	struct mlx5_ib_srq *srq;
 	struct mlx5_ib_wq *wq;
 	u16 wqe_ctr;
+	u8  roce_packet_type;
+	bool vlan_present;
 	u8 g;
 
 	if (qp->ibqp.srq || qp->ibqp.xrcd) {
@@ -223,7 +225,6 @@ static void handle_responder(struct ib_w
 		break;
 	}
 	wc->slid	   = be16_to_cpu(cqe->slid);
-	wc->sl		   = (be32_to_cpu(cqe->flags_rqpn) >> 24) & 0xf;
 	wc->src_qp	   = be32_to_cpu(cqe->flags_rqpn) & 0xffffff;
 	wc->dlid_path_bits = cqe->ml_path;
 	g = (be32_to_cpu(cqe->flags_rqpn) >> 28) & 3;
@@ -237,10 +238,22 @@ static void handle_responder(struct ib_w
 		wc->pkey_index = 0;
 	}
 
-	if (ll != IB_LINK_LAYER_ETHERNET)
+	if (ll != IB_LINK_LAYER_ETHERNET) {
+		wc->sl = (be32_to_cpu(cqe->flags_rqpn) >> 24) & 0xf;
 		return;
+	}
+
+	vlan_present = cqe->l4_l3_hdr_type & 0x1;
+	roce_packet_type   = (be32_to_cpu(cqe->flags_rqpn) >> 24) & 0x3;
+	if (vlan_present) {
+		wc->vlan_id = (be16_to_cpu(cqe->vlan_info)) & 0xfff;
+		wc->sl = (be16_to_cpu(cqe->vlan_info) >> 13) & 0x7;
+		wc->wc_flags |= IB_WC_WITH_VLAN;
+	} else {
+		wc->sl = 0;
+	}
 
-	switch (wc->sl & 0x3) {
+	switch (roce_packet_type) {
 	case MLX5_CQE_ROCE_L3_HEADER_TYPE_GRH:
 		wc->network_hdr_type = RDMA_NETWORK_IB;
 		break;

[PATCH 4.9 052/177] ASoC: Intel: Skylake: Uninitialized variable in probe_codec()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>


[ Upstream commit e6a33532affd14c12688c0e9b2e773e8b2550f3b ]

My static checker complains that if snd_hdac_bus_get_response() returns
-EIO then "res" is uninitialized.  Fix this by initializing it to -1 so
that the error is handled correctly.

Fixes: d8c2dab8381d ("ASoC: Intel: Add Skylake HDA audio driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/intel/skylake/skl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -457,7 +457,7 @@ static int probe_codec(struct hdac_ext_b
 	struct hdac_bus *bus = ebus_to_hbus(ebus);
 	unsigned int cmd = (addr << 28) | (AC_NODE_ROOT << 20) |
 		(AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID;
-	unsigned int res;
+	unsigned int res = -1;
 
 	mutex_lock(&bus->cmd_mutex);
 	snd_hdac_bus_send_cmd(bus, cmd);

[PATCH 4.9 053/177] ibmvnic: Disable irq prior to close

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian King <brking@linux.vnet.ibm.com>


[ Upstream commit dd9c20fa07ba5cfb5a0ab3181d68530506610605 ]

    Add some code to call disable_irq on all the vnic interface's irqs.
    This fixes a crash observed when closing an active interface, as
    seen in the oops below when we try to access a buffer in the interrupt
    handler which we've already freed.

    Unable to handle kernel paging request for data at address 0x00000001
    Faulting instruction address: 0xd000000003886824
    Oops: Kernel access of bad area, sig: 11 [#1]
    SMP NR_CPUS=2048 NUMA pSeries
    Modules linked in: ibmvnic(OEN) rpadlpar_io(X) rpaphp(X) tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag rpcsec_
    Supported: No, Unsupported modules are loaded
    CPU: 8 PID: 0 Comm: swapper/8 Tainted: G           OE   NX 4.4.49-92.11-default #1
    task: c00000007f990110 ti: c0000000fffa0000 task.ti: c00000007f9b8000
    NIP: d000000003886824 LR: d000000003886824 CTR: c0000000007eff60
    REGS: c0000000fffa3a70 TRAP: 0300   Tainted: G           OE   NX  (4.4.49-92.11-default)
    MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 22008042  XER: 20000008
    CFAR: c000000000008468 DAR: 0000000000000001 DSISR: 40000000 SOFTE: 0
    GPR00: d000000003886824 c0000000fffa3cf0 d000000003894118 0000000000000000
    GPR04: 0000000000000000 0000000000000000 c000000001249da0 0000000000000000
    GPR08: 000000000000000e 0000000000000000 c0000000ccb00000 d000000003889180
    GPR12: c0000000007eff60 c000000007af4c00 0000000000000001 c0000000010def30
    GPR16: c00000007f9b8000 c000000000b98c30 c00000007f9b8080 c000000000bab858
    GPR20: 0000000000000005 0000000000000000 c0000000ff5d7e80 c0000000f809f648
    GPR24: c0000000ff5d7ec8 0000000000000000 0000000000000000 c0000000ccb001a0
    GPR28: 000000000000000a c0000000f809f600 c0000000fd4cd900 c0000000f9cd5b00
    NIP [d000000003886824] ibmvnic_interrupt_tx+0x114/0x380 [ibmvnic]
    LR [d000000003886824] ibmvnic_interrupt_tx+0x114/0x380 [ibmvnic]
    Call Trace:
    [c0000000fffa3cf0] [d000000003886824] ibmvnic_interrupt_tx+0x114/0x380 [ibmvnic] (unreliable)
    [c0000000fffa3dd0] [c000000000132940] __handle_irq_event_percpu+0x90/0x2e0
    [c0000000fffa3e90] [c000000000132bcc] handle_irq_event_percpu+0x3c/0x90
    [c0000000fffa3ed0] [c000000000132c88] handle_irq_event+0x68/0xc0
    [c0000000fffa3f00] [c000000000137edc] handle_fasteoi_irq+0xec/0x250
    [c0000000fffa3f30] [c000000000131b04] generic_handle_irq+0x54/0x80
    [c0000000fffa3f60] [c000000000011190] __do_irq+0x80/0x1d0
    [c0000000fffa3f90] [c0000000000248d8] call_do_irq+0x14/0x24
    [c00000007f9bb9e0] [c000000000011380] do_IRQ+0xa0/0x120
    [c00000007f9bba40] [c000000000002594] hardware_interrupt_common+0x114/0x180

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -511,6 +511,23 @@ alloc_napi_failed:
 	return -ENOMEM;
 }
 
+static void disable_sub_crqs(struct ibmvnic_adapter *adapter)
+{
+	int i;
+
+	if (adapter->tx_scrq) {
+		for (i = 0; i < adapter->req_tx_queues; i++)
+			if (adapter->tx_scrq[i])
+				disable_irq(adapter->tx_scrq[i]->irq);
+	}
+
+	if (adapter->rx_scrq) {
+		for (i = 0; i < adapter->req_rx_queues; i++)
+			if (adapter->rx_scrq[i])
+				disable_irq(adapter->rx_scrq[i]->irq);
+	}
+}
+
 static int ibmvnic_close(struct net_device *netdev)
 {
 	struct ibmvnic_adapter *adapter = netdev_priv(netdev);
@@ -519,6 +536,7 @@ static int ibmvnic_close(struct net_devi
 	int i;
 
 	adapter->closing = true;
+	disable_sub_crqs(adapter);
 
 	for (i = 0; i < adapter->req_rx_queues; i++)
 		napi_disable(&adapter->napi[i]);

[PATCH 4.9 054/177] netvsc: Deal with rescinded channels correctly

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "K. Y. Srinivasan" <kys@microsoft.com>


[ Upstream commit 73e64fa4f417b22d8d5521999a631ced8e2d442e ]

We will not be able to send packets over a channel that has been
rescinded. Make necessary adjustments so we can properly cleanup
even when the channel is rescinded. This issue can be trigerred
in the NIC hot-remove path.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/netvsc.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -151,6 +151,13 @@ static void netvsc_destroy_buf(struct hv
 				       sizeof(struct nvsp_message),
 				       (unsigned long)revoke_packet,
 				       VM_PKT_DATA_INBAND, 0);
+		/* If the failure is because the channel is rescinded;
+		 * ignore the failure since we cannot send on a rescinded
+		 * channel. This would allow us to properly cleanup
+		 * even when the channel is rescinded.
+		 */
+		if (device->channel->rescind)
+			ret = 0;
 		/*
 		 * If we failed here, we might as well return and
 		 * have a leak rather than continue and a bugchk
@@ -211,6 +218,15 @@ static void netvsc_destroy_buf(struct hv
 				       sizeof(struct nvsp_message),
 				       (unsigned long)revoke_packet,
 				       VM_PKT_DATA_INBAND, 0);
+
+		/* If the failure is because the channel is rescinded;
+		 * ignore the failure since we cannot send on a rescinded
+		 * channel. This would allow us to properly cleanup
+		 * even when the channel is rescinded.
+		 */
+		if (device->channel->rescind)
+			ret = 0;
+
 		/* If we failed here, we might as well return and
 		 * have a leak rather than continue and a bugchk
 		 */

[PATCH 4.9 055/177] Fix driver usage of 128B WQEs when WQ_CREATE is V1.

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Smart <jsmart2021@gmail.com>


[ Upstream commit 3f247de750b8dd8f50a2c1390e2a1238790a9dff ]

There are two versions of a structure for queue creation and setup that the
driver shares with FW. The driver was only treating as version 0.

Verify WQ_CREATE with 128B WQEs in V0 and V1.

Code review of another bug showed the driver passing
128B WQEs and 8 pages in WQ CREATE and V0.
Code inspection/instrumentation showed that the driver
uses V0 in WQ_CREATE and if the caller passes queue->entry_size
128B, the driver sets the hdr_version to V1 so all is good.
When I tested the V1 WQ_CREATE, the mailbox failed causing
the driver to unload.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_sli.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -13696,6 +13696,9 @@ lpfc_wq_create(struct lpfc_hba *phba, st
 	case LPFC_Q_CREATE_VERSION_1:
 		bf_set(lpfc_mbx_wq_create_wqe_count, &wq_create->u.request_1,
 		       wq->entry_count);
+		bf_set(lpfc_mbox_hdr_version, &shdr->request,
+		       LPFC_Q_CREATE_VERSION_1);
+
 		switch (wq->entry_size) {
 		default:
 		case 64:

[PATCH 4.9 056/177] Fix Express lane queue creation.

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Smart <jsmart2021@gmail.com>


[ Upstream commit 7e04e21afa82ef024416f5413b5bdb66e0505bcd ]

The older sli4 adapters only supported the 64 byte WQE entry size.
The new adapter (fw) support both 64 and 128 byte WQE entry sizies.
The Express lane WQ was not being created with the 128 byte WQE sizes
when it was supported.

Not having the right WQE size created for the express lane work queue
caused the the firmware to overwrite the lun indentifier in the FCP header.

This patch correctly creates the express lane work queue with the
supported size.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/lpfc/lpfc_init.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -11312,6 +11312,7 @@ int
 lpfc_fof_queue_create(struct lpfc_hba *phba)
 {
 	struct lpfc_queue *qdesc;
+	uint32_t wqesize;
 
 	/* Create FOF EQ */
 	qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
@@ -11332,8 +11333,11 @@ lpfc_fof_queue_create(struct lpfc_hba *p
 		phba->sli4_hba.oas_cq = qdesc;
 
 		/* Create OAS WQ */
-		qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
+		wqesize = (phba->fcp_embed_io) ?
+				LPFC_WQE128_SIZE : phba->sli4_hba.wq_esize;
+		qdesc = lpfc_sli4_queue_alloc(phba, wqesize,
 					      phba->sli4_hba.wq_ecount);
+
 		if (!qdesc)
 			goto out_error;
 

[PATCH 4.9 057/177] gpio: gpio-wcove: fix irq pending status bit width

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>


[ Upstream commit 7c2d176fe3f8dce632b948f79c7e89916ffe2c70 ]

Whiskey cove PMIC has three GPIO banks with total number of 13 GPIO
pins. But when checking for the pending status, for_each_set_bit() uses
bit width of 7 and hence it only checks the status for first 7 GPIO pins
missing to check/clear the status of rest of the GPIO pins. This patch
fixes this issue.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpio/gpio-wcove.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpio/gpio-wcove.c
+++ b/drivers/gpio/gpio-wcove.c
@@ -318,7 +318,7 @@ static irqreturn_t wcove_gpio_irq_handle
 	while (pending) {
 		/* One iteration is for all pending bits */
 		for_each_set_bit(gpio, (const unsigned long *)&pending,
-						 GROUP0_NR_IRQS) {
+						 WCOVE_GPIO_NUM) {
 			offset = (gpio > GROUP0_NR_IRQS) ? 1 : 0;
 			mask = (offset == 1) ? BIT(gpio - GROUP0_NR_IRQS) :
 								BIT(gpio);

[PATCH 4.9 058/177] netfilter: xt_CT: fix refcnt leak on error path

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gao Feng <fgao@ikuai8.com>


[ Upstream commit 470acf55a021713869b9bcc967268ac90c8a0fac ]

There are two cases which causes refcnt leak.

1. When nf_ct_timeout_ext_add failed in xt_ct_set_timeout, it should
free the timeout refcnt.
Now goto the err_put_timeout error handler instead of going ahead.

2. When the time policy is not found, we should call module_put.
Otherwise, the related cthelper module cannot be removed anymore.
It is easy to reproduce by typing the following command:
  # iptables -t raw -A OUTPUT -p tcp -j CT --helper ftp --timeout xxx

Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/xt_CT.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/net/netfilter/xt_CT.c
+++ b/net/netfilter/xt_CT.c
@@ -168,8 +168,10 @@ xt_ct_set_timeout(struct nf_conn *ct, co
 		goto err_put_timeout;
 	}
 	timeout_ext = nf_ct_timeout_ext_add(ct, timeout, GFP_ATOMIC);
-	if (timeout_ext == NULL)
+	if (!timeout_ext) {
 		ret = -ENOMEM;
+		goto err_put_timeout;
+	}
 
 	rcu_read_unlock();
 	return ret;
@@ -201,6 +203,7 @@ static int xt_ct_tg_check(const struct x
 			  struct xt_ct_target_info_v1 *info)
 {
 	struct nf_conntrack_zone zone;
+	struct nf_conn_help *help;
 	struct nf_conn *ct;
 	int ret = -EOPNOTSUPP;
 
@@ -249,7 +252,7 @@ static int xt_ct_tg_check(const struct x
 	if (info->timeout[0]) {
 		ret = xt_ct_set_timeout(ct, par, info->timeout);
 		if (ret < 0)
-			goto err3;
+			goto err4;
 	}
 	__set_bit(IPS_CONFIRMED_BIT, &ct->status);
 	nf_conntrack_get(&ct->ct_general);
@@ -257,6 +260,10 @@ out:
 	info->ct = ct;
 	return 0;
 
+err4:
+	help = nfct_help(ct);
+	if (help)
+		module_put(help->helper->me);
 err3:
 	nf_ct_tmpl_free(ct);
 err2:

[PATCH 4.9 059/177] openvswitch: Delete conntrack entry clashing with an expectation.

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jarno Rajahalme <jarno@ovn.org>


[ Upstream commit cf5d70918877c6a6655dc1e92e2ebb661ce904fd ]

Conntrack helpers do not check for a potentially clashing conntrack
entry when creating a new expectation.  Also, nf_conntrack_in() will
check expectations (via init_conntrack()) only if a conntrack entry
can not be found.  The expectation for a packet which also matches an
existing conntrack entry will not be removed by conntrack, and is
currently handled inconsistently by OVS, as OVS expects the
expectation to be removed when the connection tracking entry matching
that expectation is confirmed.

It should be noted that normally an IP stack would not allow reuse of
a 5-tuple of an old (possibly lingering) connection for a new data
connection, so this is somewhat unlikely corner case.  However, it is
possible that a misbehaving source could cause conntrack entries be
created that could then interfere with new related connections.

Fix this in the OVS module by deleting the clashing conntrack entry
after an expectation has been matched.  This causes the following
nf_conntrack_in() call also find the expectation and remove it when
creating the new conntrack entry, as well as the forthcoming reply
direction packets to match the new related connection instead of the
old clashing conntrack entry.

Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action")
Reported-by: Yang Song <yangsong@vmware.com>
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/openvswitch/conntrack.c |   30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -396,10 +396,38 @@ ovs_ct_expect_find(struct net *net, cons
 		   u16 proto, const struct sk_buff *skb)
 {
 	struct nf_conntrack_tuple tuple;
+	struct nf_conntrack_expect *exp;
 
 	if (!nf_ct_get_tuplepr(skb, skb_network_offset(skb), proto, net, &tuple))
 		return NULL;
-	return __nf_ct_expect_find(net, zone, &tuple);
+
+	exp = __nf_ct_expect_find(net, zone, &tuple);
+	if (exp) {
+		struct nf_conntrack_tuple_hash *h;
+
+		/* Delete existing conntrack entry, if it clashes with the
+		 * expectation.  This can happen since conntrack ALGs do not
+		 * check for clashes between (new) expectations and existing
+		 * conntrack entries.  nf_conntrack_in() will check the
+		 * expectations only if a conntrack entry can not be found,
+		 * which can lead to OVS finding the expectation (here) in the
+		 * init direction, but which will not be removed by the
+		 * nf_conntrack_in() call, if a matching conntrack entry is
+		 * found instead.  In this case all init direction packets
+		 * would be reported as new related packets, while reply
+		 * direction packets would be reported as un-related
+		 * established packets.
+		 */
+		h = nf_conntrack_find_get(net, zone, &tuple);
+		if (h) {
+			struct nf_conn *ct = nf_ct_tuplehash_to_ctrack(h);
+
+			nf_ct_delete(ct, 0, 0);
+			nf_conntrack_put(&ct->ct_general);
+		}
+	}
+
+	return exp;
 }
 
 /* This replicates logic from nf_conntrack_core.c that is not exported. */

[PATCH 4.9 060/177] netfilter: nf_ct_helper: permit cthelpers with different names via nfnetlink

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liping Zhang <zlpnobody@gmail.com>


[ Upstream commit 66e5a6b18bd09d0431e97cd3c162e76c5c2aebba ]

cthelpers added via nfnetlink may have the same tuple, i.e. except for
the l3proto and l4proto, other fields are all zero. So even with the
different names, we will also fail to add them:
  # nfct helper add ssdp inet udp
  # nfct helper add tftp inet udp
  nfct v1.4.3: netlink error: File exists

So in order to avoid unpredictable behaviour, we should:
1. cthelpers can be selected by nft ct helper obj or xt_CT target, so
report error if duplicated { name, l3proto, l4proto } tuple exist.
2. cthelpers can be selected by nf_ct_tuple_src_mask_cmp when
nf_ct_auto_assign_helper is enabled, so also report error if duplicated
{ l3proto, l4proto, src-port } tuple exist.

Also note, if the cthelper is added from userspace, then the src-port will
always be zero, it's invalid for nf_ct_auto_assign_helper, so there's no
need to check the second point listed above.

Fixes: 893e093c786c ("netfilter: nf_ct_helper: bail out on duplicated helpers")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nf_conntrack_helper.c |   26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

--- a/net/netfilter/nf_conntrack_helper.c
+++ b/net/netfilter/nf_conntrack_helper.c
@@ -379,17 +379,33 @@ int nf_conntrack_helper_register(struct
 	struct nf_conntrack_tuple_mask mask = { .src.u.all = htons(0xFFFF) };
 	unsigned int h = helper_hash(&me->tuple);
 	struct nf_conntrack_helper *cur;
-	int ret = 0;
+	int ret = 0, i;
 
 	BUG_ON(me->expect_policy == NULL);
 	BUG_ON(me->expect_class_max >= NF_CT_MAX_EXPECT_CLASSES);
 	BUG_ON(strlen(me->name) > NF_CT_HELPER_NAME_LEN - 1);
 
 	mutex_lock(&nf_ct_helper_mutex);
-	hlist_for_each_entry(cur, &nf_ct_helper_hash[h], hnode) {
-		if (nf_ct_tuple_src_mask_cmp(&cur->tuple, &me->tuple, &mask)) {
-			ret = -EEXIST;
-			goto out;
+	for (i = 0; i < nf_ct_helper_hsize; i++) {
+		hlist_for_each_entry(cur, &nf_ct_helper_hash[i], hnode) {
+			if (!strcmp(cur->name, me->name) &&
+			    (cur->tuple.src.l3num == NFPROTO_UNSPEC ||
+			     cur->tuple.src.l3num == me->tuple.src.l3num) &&
+			    cur->tuple.dst.protonum == me->tuple.dst.protonum) {
+				ret = -EEXIST;
+				goto out;
+			}
+		}
+	}
+
+	/* avoid unpredictable behaviour for auto_assign_helper */
+	if (!(me->flags & NF_CT_HELPER_F_USERSPACE)) {
+		hlist_for_each_entry(cur, &nf_ct_helper_hash[h], hnode) {
+			if (nf_ct_tuple_src_mask_cmp(&cur->tuple, &me->tuple,
+						     &mask)) {
+				ret = -EEXIST;
+				goto out;
+			}
 		}
 	}
 	hlist_add_head_rcu(&me->hnode, &nf_ct_helper_hash[h]);

[PATCH 4.9 061/177] mmc: host: omap_hsmmc: checking for NULL instead of IS_ERR()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>


[ Upstream commit ec5ab8933772c87f24ad62a4a602fe8949f423c2 ]

devm_pinctrl_get() returns error pointers, it never returns NULL.

Fixes: 455e5cd6f736 ("mmc: omap_hsmmc: Pin remux workaround to support SDIO interrupt on AM335x")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/omap_hsmmc.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1762,8 +1762,8 @@ static int omap_hsmmc_configure_wake_irq
 	 */
 	if (host->pdata->controller_flags & OMAP_HSMMC_SWAKEUP_MISSING) {
 		struct pinctrl *p = devm_pinctrl_get(host->dev);
-		if (!p) {
-			ret = -ENODEV;
+		if (IS_ERR(p)) {
+			ret = PTR_ERR(p);
 			goto err_free_irq;
 		}
 		if (IS_ERR(pinctrl_lookup_state(p, PINCTRL_STATE_DEFAULT))) {

[PATCH 4.9 062/177] tipc: check return value of nlmsg_new

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pan Bian <bianpan2016@163.com>


[ Upstream commit 78302fd405769c9a9379e9adda119d533dce2eed ]

Function nlmsg_new() will return a NULL pointer if there is no enough
memory, and its return value should be checked before it is used.
However, in function tipc_nl_node_get_monitor(), the validation of the
return value of function nlmsg_new() is missed. This patch fixes the
bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tipc/node.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/tipc/node.c
+++ b/net/tipc/node.c
@@ -2094,6 +2094,8 @@ int tipc_nl_node_get_monitor(struct sk_b
 	int err;
 
 	msg.skb = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	if (!msg.skb)
+		return -ENOMEM;
 	msg.portid = info->snd_portid;
 	msg.seq = info->snd_seq;
 

[PATCH 4.9 063/177] wan: pc300too: abort path on failure

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pan Bian <bianpan2016@163.com>


[ Upstream commit 2a39e7aa8a98f777f0732ca7125b6c9668791760 ]

In function pc300_pci_init_one(), on the ioremap error path, function
pc300_pci_remove_one() is called to free the allocated memory. However,
the path is not terminated, and the freed memory will be used later,
resulting in use-after-free bugs. This path fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wan/pc300too.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/wan/pc300too.c
+++ b/drivers/net/wan/pc300too.c
@@ -347,6 +347,7 @@ static int pc300_pci_init_one(struct pci
 	    card->rambase == NULL) {
 		pr_err("ioremap() failed\n");
 		pc300_pci_remove_one(pdev);
+		return -ENOMEM;
 	}
 
 	/* PLX PCI 9050 workaround for local configuration register read bug */

[PATCH 4.9 064/177] qlcnic: fix unchecked return value

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pan Bian <bianpan2016@163.com>


[ Upstream commit 91ec701a553cb3de470fd471c6fefe3ad1125455 ]

Function pci_find_ext_capability() may return 0, which is an invalid
address. In function qlcnic_sriov_virtid_fn(), its return value is used
without validation. This may result in invalid memory access bugs. This
patch fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
@@ -128,6 +128,8 @@ static int qlcnic_sriov_virtid_fn(struct
 		return 0;
 
 	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV);
+	if (!pos)
+		return 0;
 	pci_read_config_word(dev, pos + PCI_SRIOV_VF_OFFSET, &offset);
 	pci_read_config_word(dev, pos + PCI_SRIOV_VF_STRIDE, &stride);
 

[PATCH 4.9 065/177] netfilter: nft_dynset: continue to next expr if _OP_ADD succeeded

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Liping Zhang <zlpnobody@gmail.com>


[ Upstream commit 277a292835c196894ef895d5e1fd6170bb916f55 ]

Currently, after adding the following nft rules:
  # nft add set x target1 { type ipv4_addr \; flags timeout \;}
  # nft add rule x y set add ip daddr timeout 1d @target1 counter

the counters will always be zero despite of the elements are added
to the dynamic set "target1" or not, as we will break the nft expr
traversal unconditionally:
  # nft list ruleset
  ...
  set target1 {
      ...
      elements = { 8.8.8.8 expires 23h59m53s}
  }
  chain output {
      ...
      set add ip daddr timeout 1d @target1 counter packets 0 bytes 0
                                                           ^       ^
      ...
  }

Since we add the elements to the set successfully, we should continue
to the next expression.

Additionally, if elements are added to "flow table" successfully, we
will _always_ continue to the next expr, even if the operation is
_OP_ADD. So it's better to keep them to be consistent.

Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates")
Reported-by: Robert White <rwhite@pobox.com>
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/nft_dynset.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/net/netfilter/nft_dynset.c
+++ b/net/netfilter/nft_dynset.c
@@ -82,8 +82,7 @@ static void nft_dynset_eval(const struct
 		    nft_set_ext_exists(ext, NFT_SET_EXT_EXPIRATION)) {
 			timeout = priv->timeout ? : set->timeout;
 			*nft_set_ext_expiration(ext) = jiffies + timeout;
-		} else if (sexpr == NULL)
-			goto out;
+		}
 
 		if (sexpr != NULL)
 			sexpr->ops->eval(sexpr, regs, pkt);
@@ -92,7 +91,7 @@ static void nft_dynset_eval(const struct
 			regs->verdict.code = NFT_BREAK;
 		return;
 	}
-out:
+
 	if (!priv->invert)
 		regs->verdict.code = NFT_BREAK;
 }

[PATCH 4.9 066/177] platform/x86: intel-vbtn: add volume up and down

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maarten Maathuis <madman2003@gmail.com>


[ Upstream commit 8d9e29972836b75eb74f533594999500a4c7cc19 ]

Tested on HP Elite X2 1012 G1.
Matches event report of Lenovo Helix 2
(https://www.spinics.net/lists/ibm-acpi-devel/msg03982.html).

Signed-off-by: Maarten Maathuis <madman2003@shikahr.net>
[andy: fixed indentation of comments and massaged title of the change]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/x86/intel-vbtn.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -37,6 +37,10 @@ static const struct acpi_device_id intel
 static const struct key_entry intel_vbtn_keymap[] = {
 	{ KE_IGNORE, 0xC0, { KEY_POWER } },	/* power key press */
 	{ KE_KEY, 0xC1, { KEY_POWER } },	/* power key release */
+	{ KE_KEY, 0xC4, { KEY_VOLUMEUP } },		/* volume-up key press */
+	{ KE_IGNORE, 0xC5, { KEY_VOLUMEUP } },		/* volume-up key release */
+	{ KE_KEY, 0xC6, { KEY_VOLUMEDOWN } },		/* volume-down key press */
+	{ KE_IGNORE, 0xC7, { KEY_VOLUMEDOWN } },	/* volume-down key release */
 	{ KE_END },
 };
 

[PATCH 4.9 067/177] scsi: mac_esp: Replace bogus memory barrier with spinlock

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Finn Thain <fthain@telegraphics.com.au>


[ Upstream commit 4da2b1eb230ba4ad19b58984dc52e05b1073df5f ]

Commit da244654c66e ("[SCSI] mac_esp: fix for quadras with two esp
chips") added mac_scsi_esp_intr() to handle the IRQ lines from a pair of
on-board ESP chips (a normal shared IRQ did not work).

Proper mutual exclusion was missing from that patch. This patch fixes
race conditions between comparison and assignment of esp_chips[]
pointers.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/mac_esp.c |   33 +++++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)

--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -55,6 +55,7 @@ struct mac_esp_priv {
 	int error;
 };
 static struct esp *esp_chips[2];
+static DEFINE_SPINLOCK(esp_chips_lock);
 
 #define MAC_ESP_GET_PRIV(esp) ((struct mac_esp_priv *) \
 			       platform_get_drvdata((struct platform_device *) \
@@ -562,15 +563,18 @@ static int esp_mac_probe(struct platform
 	}
 
 	host->irq = IRQ_MAC_SCSI;
-	esp_chips[dev->id] = esp;
-	mb();
-	if (esp_chips[!dev->id] == NULL) {
-		err = request_irq(host->irq, mac_scsi_esp_intr, 0, "ESP", NULL);
-		if (err < 0) {
-			esp_chips[dev->id] = NULL;
-			goto fail_free_priv;
-		}
+
+	/* The request_irq() call is intended to succeed for the first device
+	 * and fail for the second device.
+	 */
+	err = request_irq(host->irq, mac_scsi_esp_intr, 0, "ESP", NULL);
+	spin_lock(&esp_chips_lock);
+	if (err < 0 && esp_chips[!dev->id] == NULL) {
+		spin_unlock(&esp_chips_lock);
+		goto fail_free_priv;
 	}
+	esp_chips[dev->id] = esp;
+	spin_unlock(&esp_chips_lock);
 
 	err = scsi_esp_register(esp, &dev->dev);
 	if (err)
@@ -579,8 +583,13 @@ static int esp_mac_probe(struct platform
 	return 0;
 
 fail_free_irq:
-	if (esp_chips[!dev->id] == NULL)
+	spin_lock(&esp_chips_lock);
+	esp_chips[dev->id] = NULL;
+	if (esp_chips[!dev->id] == NULL) {
+		spin_unlock(&esp_chips_lock);
 		free_irq(host->irq, esp);
+	} else
+		spin_unlock(&esp_chips_lock);
 fail_free_priv:
 	kfree(mep);
 fail_free_command_block:
@@ -599,9 +608,13 @@ static int esp_mac_remove(struct platfor
 
 	scsi_esp_unregister(esp);
 
+	spin_lock(&esp_chips_lock);
 	esp_chips[dev->id] = NULL;
-	if (!(esp_chips[0] || esp_chips[1]))
+	if (esp_chips[!dev->id] == NULL) {
+		spin_unlock(&esp_chips_lock);
 		free_irq(irq, NULL);
+	} else
+		spin_unlock(&esp_chips_lock);
 
 	kfree(mep);
 

[PATCH 4.9 068/177] infiniband/uverbs: Fix integer overflows

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vlad Tsyrklevich <vlad@tsyrklevich.net>


[ Upstream commit 4f7f4dcfff2c19debbcdbcc861c325610a15e0c5 ]

The 'num_sge' variable is verfied to be smaller than the 'sge_count'
variable; however, since both are user-controlled it's possible to cause
an integer overflow for the kmalloc multiply on 32-bit platforms
(num_sge and sge_count are both defined u32). By crafting an input that
causes a smaller-than-expected allocation it's possible to write
controlled data out-of-bounds.

Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/core/uverbs_cmd.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -2491,9 +2491,13 @@ ssize_t ib_uverbs_destroy_qp(struct ib_u
 
 static void *alloc_wr(size_t wr_size, __u32 num_sge)
 {
+	if (num_sge >= (U32_MAX - ALIGN(wr_size, sizeof (struct ib_sge))) /
+		       sizeof (struct ib_sge))
+		return NULL;
+
 	return kmalloc(ALIGN(wr_size, sizeof (struct ib_sge)) +
 			 num_sge * sizeof (struct ib_sge), GFP_KERNEL);
-};
+}
 
 ssize_t ib_uverbs_post_send(struct ib_uverbs_file *file,
 			    struct ib_device *ib_dev,
@@ -2719,6 +2723,13 @@ static struct ib_recv_wr *ib_uverbs_unma
 			ret = -EINVAL;
 			goto err;
 		}
+
+		if (user_wr->num_sge >=
+		    (U32_MAX - ALIGN(sizeof *next, sizeof (struct ib_sge))) /
+		    sizeof (struct ib_sge)) {
+			ret = -EINVAL;
+			goto err;
+		}
 
 		next = kmalloc(ALIGN(sizeof *next, sizeof (struct ib_sge)) +
 			       user_wr->num_sge * sizeof (struct ib_sge),

[PATCH 4.9 069/177] pNFS: Fix use after free issues in pnfs_do_read()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@primarydata.com>


[ Upstream commit 6aeafd05eca9bc8ab6b03d7e56d09ffd18190f44 ]

The assumption should be that if the caller returns PNFS_ATTEMPTED, then hdr
has been consumed, and so we should not be testing hdr->task.tk_status.
If the caller returns PNFS_TRY_AGAIN, then we need to recoalesce and
free hdr.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/pnfs.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -2308,10 +2308,20 @@ pnfs_do_read(struct nfs_pageio_descripto
 	enum pnfs_try_status trypnfs;
 
 	trypnfs = pnfs_try_to_read_data(hdr, call_ops, lseg);
-	if (trypnfs == PNFS_TRY_AGAIN)
-		pnfs_read_resend_pnfs(hdr);
-	if (trypnfs == PNFS_NOT_ATTEMPTED || hdr->task.tk_status)
+	switch (trypnfs) {
+	case PNFS_NOT_ATTEMPTED:
 		pnfs_read_through_mds(desc, hdr);
+	case PNFS_ATTEMPTED:
+		break;
+	case PNFS_TRY_AGAIN:
+		/* cleanup hdr and prepare to redo pnfs */
+		if (!test_and_set_bit(NFS_IOHDR_REDO, &hdr->flags)) {
+			struct nfs_pgio_mirror *mirror = nfs_pgio_current_mirror(desc);
+			list_splice_init(&hdr->pages, &mirror->pg_list);
+			mirror->pg_recoalesce = 1;
+		}
+		hdr->mds_ops->rpc_release(hdr);
+	}
 }
 
 static void pnfs_readhdr_free(struct nfs_pgio_header *hdr)

[PATCH 4.9 070/177] xprtrdma: Cancel refresh worker during buffer shutdown

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>


[ Upstream commit 9378b274e1eb6925db315e345f48850d2d5d9789 ]

Trying to create MRs while the transport is being torn down can
cause a crash.

Fixes: e2ac236c0b65 ("xprtrdma: Allocate MRs on demand")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sunrpc/xprtrdma/verbs.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -1054,6 +1054,7 @@ void
 rpcrdma_buffer_destroy(struct rpcrdma_buffer *buf)
 {
 	cancel_delayed_work_sync(&buf->rb_recovery_worker);
+	cancel_delayed_work_sync(&buf->rb_refresh_worker);
 
 	while (!list_empty(&buf->rb_recv_bufs)) {
 		struct rpcrdma_rep *rep;

[PATCH 4.9 071/177] NFS: dont try to cross a mountpount when there isnt one there.

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neilb@suse.com>


[ Upstream commit 99bbf6ecc694dfe0b026e15359c5aa2a60b97a93 ]

consider the sequence of commands:
 mkdir -p /import/nfs /import/bind /import/etc
 mount --bind / /import/bind
 mount --make-private /import/bind
 mount --bind /import/etc /import/bind/etc

 exportfs -o rw,no_root_squash,crossmnt,async,no_subtree_check localhost:/
 mount -o vers=4 localhost:/ /import/nfs
 ls -l /import/nfs/etc

You would not expect this to report a stale file handle.
Yet it does.

The manipulations under /import/bind cause the dentry for
/etc to get the DCACHE_MOUNTED flag set, even though nothing
is mounted on /etc.  This causes nfsd to call
nfsd_cross_mnt() even though there is no mountpoint.  So an
upcall to mountd for "/etc" is performed.

The 'crossmnt' flag on the export of / causes mountd to
report that /etc is exported as it is a descendant of /.  It
assumes the kernel wouldn't ask about something that wasn't
a mountpoint.  The filehandle returned identifies the
filesystem and the inode number of /etc.

When this filehandle is presented to rpc.mountd, via
"nfsd.fh", the inode cannot be found associated with any
name in /etc/exports, or with any mountpoint listed by
getmntent().  So rpc.mountd says the filehandle doesn't
exist. Hence ESTALE.

This is fixed by teaching nfsd not to trust DCACHE_MOUNTED
too much.  It is just a hint, not a guarantee.
Change nfsd_mountpoint() to return '1' for a certain mountpoint,
'2' for a possible mountpoint, and 0 otherwise.

Then change nfsd_crossmnt() to check if follow_down()
actually found a mountpount and, if not, to avoid performing
a lookup if the location is not known to certainly require
an export-point.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/vfs.c |   24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -94,6 +94,12 @@ nfsd_cross_mnt(struct svc_rqst *rqstp, s
 	err = follow_down(&path);
 	if (err < 0)
 		goto out;
+	if (path.mnt == exp->ex_path.mnt && path.dentry == dentry &&
+	    nfsd_mountpoint(dentry, exp) == 2) {
+		/* This is only a mountpoint in some other namespace */
+		path_put(&path);
+		goto out;
+	}
 
 	exp2 = rqst_exp_get_by_name(rqstp, &path);
 	if (IS_ERR(exp2)) {
@@ -167,16 +173,26 @@ static int nfsd_lookup_parent(struct svc
 /*
  * For nfsd purposes, we treat V4ROOT exports as though there was an
  * export at *every* directory.
+ * We return:
+ * '1' if this dentry *must* be an export point,
+ * '2' if it might be, if there is really a mount here, and
+ * '0' if there is no chance of an export point here.
  */
 int nfsd_mountpoint(struct dentry *dentry, struct svc_export *exp)
 {
-	if (d_mountpoint(dentry))
+	if (!d_inode(dentry))
+		return 0;
+	if (exp->ex_flags & NFSEXP_V4ROOT)
 		return 1;
 	if (nfsd4_is_junction(dentry))
 		return 1;
-	if (!(exp->ex_flags & NFSEXP_V4ROOT))
-		return 0;
-	return d_inode(dentry) != NULL;
+	if (d_mountpoint(dentry))
+		/*
+		 * Might only be a mountpoint in a different namespace,
+		 * but we need to check.
+		 */
+		return 2;
+	return 0;
 }
 
 __be32

[PATCH 4.9 072/177] iio: st_pressure: st_accel: Initialise sensor platform data properly

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shrirang Bagul <shrirang.bagul@canonical.com>


[ Upstream commit 7383d44b84c94aaca4bf695a6bd8a69f2295ef1a ]

This patch fixes the sensor platform data initialisation for st_pressure
and st_accel device drivers. Without this patch, the driver fails to
register the sensors when the user removes and re-loads the driver.

1. Unload the kernel modules for st_pressure
$ sudo rmmod st_pressure_i2c
$ sudo rmmod st_pressure

2. Re-load the driver
$ sudo insmod st_pressure
$ sudo insmod st_pressure_i2c

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/accel/st_accel_core.c       |    7 ++++---
 drivers/iio/pressure/st_pressure_core.c |    8 ++++----
 2 files changed, 8 insertions(+), 7 deletions(-)

--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -827,6 +827,8 @@ static const struct iio_trigger_ops st_a
 int st_accel_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *adata = iio_priv(indio_dev);
+	struct st_sensors_platform_data *pdata =
+		(struct st_sensors_platform_data *)adata->dev->platform_data;
 	int irq = adata->get_irq_data_ready(indio_dev);
 	int err;
 
@@ -853,9 +855,8 @@ int st_accel_common_probe(struct iio_dev
 					&adata->sensor_settings->fs.fs_avl[0];
 	adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
 
-	if (!adata->dev->platform_data)
-		adata->dev->platform_data =
-			(struct st_sensors_platform_data *)&default_accel_pdata;
+	if (!pdata)
+		pdata = (struct st_sensors_platform_data *)&default_accel_pdata;
 
 	err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
 	if (err < 0)
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -638,6 +638,8 @@ static const struct iio_trigger_ops st_p
 int st_press_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *press_data = iio_priv(indio_dev);
+	struct st_sensors_platform_data *pdata =
+		(struct st_sensors_platform_data *)press_data->dev->platform_data;
 	int irq = press_data->get_irq_data_ready(indio_dev);
 	int err;
 
@@ -673,10 +675,8 @@ int st_press_common_probe(struct iio_dev
 	press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz;
 
 	/* Some devices don't support a data ready pin. */
-	if (!press_data->dev->platform_data &&
-				press_data->sensor_settings->drdy_irq.addr)
-		press_data->dev->platform_data =
-			(struct st_sensors_platform_data *)&default_press_pdata;
+	if (!pdata && press_data->sensor_settings->drdy_irq.addr)
+		pdata =	(struct st_sensors_platform_data *)&default_press_pdata;
 
 	err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);
 	if (err < 0)

[PATCH 4.9 073/177] mt7601u: check return value of alloc_skb

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pan Bian <bianpan2016@163.com>


[ Upstream commit 5fb01e91daf84ad1e50edfcf63116ecbe31e7ba7 ]

Function alloc_skb() will return a NULL pointer if there is no enough
memory. However, in function mt7601u_mcu_msg_alloc(), its return value
is not validated before it is used. This patch fixes it.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/mediatek/mt7601u/mcu.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/mediatek/mt7601u/mcu.c
+++ b/drivers/net/wireless/mediatek/mt7601u/mcu.c
@@ -66,8 +66,10 @@ mt7601u_mcu_msg_alloc(struct mt7601u_dev
 	WARN_ON(len % 4); /* if length is not divisible by 4 we need to pad */
 
 	skb = alloc_skb(len + MT_DMA_HDR_LEN + 4, GFP_KERNEL);
-	skb_reserve(skb, MT_DMA_HDR_LEN);
-	memcpy(skb_put(skb, len), data, len);
+	if (skb) {
+		skb_reserve(skb, MT_DMA_HDR_LEN);
+		memcpy(skb_put(skb, len), data, len);
+	}
 
 	return skb;
 }
@@ -170,6 +172,8 @@ static int mt7601u_mcu_function_select(s
 	};
 
 	skb = mt7601u_mcu_msg_alloc(dev, &msg, sizeof(msg));
+	if (!skb)
+		return -ENOMEM;
 	return mt7601u_mcu_msg_send(dev, skb, CMD_FUN_SET_OP, func == 5);
 }
 
@@ -205,6 +209,8 @@ mt7601u_mcu_calibrate(struct mt7601u_dev
 	};
 
 	skb = mt7601u_mcu_msg_alloc(dev, &msg, sizeof(msg));
+	if (!skb)
+		return -ENOMEM;
 	return mt7601u_mcu_msg_send(dev, skb, CMD_CALIBRATION_OP, true);
 }
 

[PATCH 4.9 074/177] libertas: check return value of alloc_workqueue

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pan Bian <bianpan2016@163.com>


[ Upstream commit dc3f89c38a8406554ffeffa370aad086a9c5e9de ]

Function alloc_workqueue() will return a NULL pointer if there is no
enough memory, and its return value should be validated before using.
However, in function if_spi_probe(), its return value is not checked.
This may result in a NULL dereference bug. This patch fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/marvell/libertas/if_spi.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/net/wireless/marvell/libertas/if_spi.c
+++ b/drivers/net/wireless/marvell/libertas/if_spi.c
@@ -1181,6 +1181,10 @@ static int if_spi_probe(struct spi_devic
 
 	/* Initialize interrupt handling stuff. */
 	card->workqueue = alloc_workqueue("libertas_spi", WQ_MEM_RECLAIM, 0);
+	if (!card->workqueue) {
+		err = -ENOMEM;
+		goto remove_card;
+	}
 	INIT_WORK(&card->packet_work, if_spi_host_to_card_worker);
 	INIT_WORK(&card->resume_work, if_spi_resume_worker);
 
@@ -1209,6 +1213,7 @@ release_irq:
 	free_irq(spi->irq, card);
 terminate_workqueue:
 	destroy_workqueue(card->workqueue);
+remove_card:
 	lbs_remove_card(priv); /* will call free_netdev */
 free_card:
 	free_if_spi_card(card);

[PATCH 4.9 075/177] rndis_wlan: add return value validation

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pan Bian <bianpan2016@163.com>


[ Upstream commit 9dc7efd3978aa67ae598129d2a3f240b390ce508 ]

Function create_singlethread_workqueue() will return a NULL pointer if
there is no enough memory, and its return value should be validated
before using. However, in function rndis_wlan_bind(), its return value
is not checked. This may cause NULL dereference bugs. This patch fixes
it.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/rndis_wlan.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -3427,6 +3427,10 @@ static int rndis_wlan_bind(struct usbnet
 
 	/* because rndis_command() sleeps we need to use workqueue */
 	priv->workqueue = create_singlethread_workqueue("rndis_wlan");
+	if (!priv->workqueue) {
+		wiphy_free(wiphy);
+		return -ENOMEM;
+	}
 	INIT_WORK(&priv->work, rndis_wlan_worker);
 	INIT_DELAYED_WORK(&priv->dev_poller_work, rndis_device_poller);
 	INIT_DELAYED_WORK(&priv->scan_work, rndis_get_scan_results);

[PATCH 4.9 076/177] Btrfs: fix incorrect space accounting after failure to insert inline extent

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>


[ Upstream commit 1c81ba237bcecad9bc885a1ddcf02d725ea38482 ]

When using compression, if we fail to insert an inline extent we
incorrectly end up attempting to free the reserved data space twice,
once through extent_clear_unlock_delalloc(), because we pass it the
flag EXTENT_DO_ACCOUNTING, and once through a direct call to
btrfs_free_reserved_data_space_noquota(). This results in a trace
like the following:

[  834.576240] ------------[ cut here ]------------
[  834.576825] WARNING: CPU: 2 PID: 486 at fs/btrfs/extent-tree.c:4316 btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs]
[  834.579501] Modules linked in: btrfs crc32c_generic xor raid6_pq ppdev i2c_piix4 acpi_cpufreq psmouse tpm_tis parport_pc pcspkr serio_raw tpm_tis_core sg parport evdev i2c_core tpm button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio scsi_mod e1000 floppy [last unloaded: btrfs]
[  834.592116] CPU: 2 PID: 486 Comm: kworker/u32:4 Not tainted 4.10.0-rc8-btrfs-next-37+ #2
[  834.593316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[  834.595273] Workqueue: btrfs-delalloc btrfs_delalloc_helper [btrfs]
[  834.596103] Call Trace:
[  834.596103]  dump_stack+0x67/0x90
[  834.596103]  __warn+0xc2/0xdd
[  834.596103]  warn_slowpath_null+0x1d/0x1f
[  834.596103]  btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs]
[  834.596103]  compress_file_range.constprop.42+0x2fa/0x3fc [btrfs]
[  834.596103]  ? submit_compressed_extents+0x3a7/0x3a7 [btrfs]
[  834.596103]  async_cow_start+0x32/0x4d [btrfs]
[  834.596103]  btrfs_scrubparity_helper+0x187/0x3e7 [btrfs]
[  834.596103]  btrfs_delalloc_helper+0xe/0x10 [btrfs]
[  834.596103]  process_one_work+0x273/0x4e4
[  834.596103]  worker_thread+0x1eb/0x2ca
[  834.596103]  ? rescuer_thread+0x2b6/0x2b6
[  834.596103]  kthread+0x100/0x108
[  834.596103]  ? __list_del_entry+0x22/0x22
[  834.596103]  ret_from_fork+0x2e/0x40
[  834.611656] ---[ end trace 719902fe6bdef08f ]---

So fix this by not calling directly btrfs_free_reserved_data_space_noquota()
if an error happened.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/inode.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -567,8 +567,10 @@ cont:
 						     PAGE_SET_WRITEBACK |
 						     page_error_op |
 						     PAGE_END_WRITEBACK);
-			btrfs_free_reserved_data_space_noquota(inode, start,
-						end - start + 1);
+			if (ret == 0)
+				btrfs_free_reserved_data_space_noquota(inode,
+							       start,
+							       end - start + 1);
 			goto free_pages_out;
 		}
 	}

[PATCH 4.9 077/177] Btrfs: send, fix file hole not being preserved due to inline extent

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>


[ Upstream commit e1cbfd7bf6dabdac561c75d08357571f44040a45 ]

Normally we don't have inline extents followed by regular extents, but
there's currently at least one harmless case where this happens. For
example, when the page size is 4Kb and compression is enabled:

  $ mkfs.btrfs -f /dev/sdb
  $ mount -o compress /dev/sdb /mnt
  $ xfs_io -f -c "pwrite -S 0xaa 0 4K" -c "fsync" /mnt/foobar
  $ xfs_io -c "pwrite -S 0xbb 8K 4K" -c "fsync" /mnt/foobar

In this case we get a compressed inline extent, representing 4Kb of
data, followed by a hole extent and then a regular data extent. The
inline extent was not expanded/converted to a regular extent exactly
because it represents 4Kb of data. This does not cause any apparent
problem (such as the issue solved by commit e1699d2d7bf6
("btrfs: add missing memset while reading compressed inline extents"))
except trigger an unexpected case in the incremental send code path
that makes us issue an operation to write a hole when it's not needed,
resulting in more writes at the receiver and wasting space at the
receiver.

So teach the incremental send code to deal with this particular case.

The issue can be currently triggered by running fstests btrfs/137 with
compression enabled (MOUNT_OPTIONS="-o compress" ./check btrfs/137).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/send.c |   23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -5156,13 +5156,19 @@ static int is_extent_unchanged(struct se
 	while (key.offset < ekey->offset + left_len) {
 		ei = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
 		right_type = btrfs_file_extent_type(eb, ei);
-		if (right_type != BTRFS_FILE_EXTENT_REG) {
+		if (right_type != BTRFS_FILE_EXTENT_REG &&
+		    right_type != BTRFS_FILE_EXTENT_INLINE) {
 			ret = 0;
 			goto out;
 		}
 
 		right_disknr = btrfs_file_extent_disk_bytenr(eb, ei);
-		right_len = btrfs_file_extent_num_bytes(eb, ei);
+		if (right_type == BTRFS_FILE_EXTENT_INLINE) {
+			right_len = btrfs_file_extent_inline_len(eb, slot, ei);
+			right_len = PAGE_ALIGN(right_len);
+		} else {
+			right_len = btrfs_file_extent_num_bytes(eb, ei);
+		}
 		right_offset = btrfs_file_extent_offset(eb, ei);
 		right_gen = btrfs_file_extent_generation(eb, ei);
 
@@ -5176,6 +5182,19 @@ static int is_extent_unchanged(struct se
 			goto out;
 		}
 
+		/*
+		 * We just wanted to see if when we have an inline extent, what
+		 * follows it is a regular extent (wanted to check the above
+		 * condition for inline extents too). This should normally not
+		 * happen but it's possible for example when we have an inline
+		 * compressed extent representing data with a size matching
+		 * the page size (currently the same as sector size).
+		 */
+		if (right_type == BTRFS_FILE_EXTENT_INLINE) {
+			ret = 0;
+			goto out;
+		}
+
 		left_offset_fixed = left_offset;
 		if (key.offset < ekey->offset) {
 			/* Fix the right offset for 2a and 7. */

[PATCH 4.9 078/177] Btrfs: fix extent map leak during fallocate error path

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Filipe Manana <fdmanana@suse.com>


[ Upstream commit be2d253cc98244765323a7c94cc1ac5cd5a17072 ]

If the call to btrfs_qgroup_reserve_data() failed, we were leaking an
extent map structure. The failure can happen either due to an -ENOMEM
condition or, when quotas are enabled, due to -EDQUOT for example.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/file.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -2817,8 +2817,10 @@ static long btrfs_fallocate(struct file
 			}
 			ret = btrfs_qgroup_reserve_data(inode, cur_offset,
 					last_byte - cur_offset);
-			if (ret < 0)
+			if (ret < 0) {
+				free_extent_map(em);
 				break;
+			}
 		} else {
 			/*
 			 * Do not need to reserve unwritten extent for this

[PATCH 4.9 079/177] orangefs: do not wait for timeout if umounting

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Brandenburg <martin@omnibond.com>


[ Upstream commit b5a9d61eebdd0016ccb383b25a5c3d04977a6549 ]

When the computer is turned off, all the processes are killed and then
all the filesystems are umounted.  OrangeFS should not wait for the
userspace daemon to come back in that case.

This only works for plain umount(2).  To actually take advantage of this
interactively, `umount -f' is needed; otherwise umount will issue a
statfs first, which will wait for the userspace daemon to come back.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/orangefs/waitqueue.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/fs/orangefs/waitqueue.c
+++ b/fs/orangefs/waitqueue.c
@@ -124,7 +124,14 @@ retry_servicing:
 		gossip_debug(GOSSIP_WAIT_DEBUG,
 			     "%s:client core is NOT in service.\n",
 			     __func__);
-		timeout = op_timeout_secs * HZ;
+		/*
+		 * Don't wait for the userspace component to return if
+		 * the filesystem is being umounted anyway.
+		 */
+		if (op->upcall.type == ORANGEFS_VFS_OP_FS_UMOUNT)
+			timeout = 0;
+		else
+			timeout = op_timeout_secs * HZ;
 	}
 	spin_unlock(&orangefs_request_list_lock);
 

[PATCH 4.9 080/177] mac80211: dont parse encrypted management frames in ieee80211_frame_acked

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>


[ Upstream commit cf147085fdda044622973a12e4e06f1c753ab677 ]

ieee80211_frame_acked is called when a frame is acked by
the peer. In case this is a management frame, we check
if this an SMPS frame, in which case we can update our
antenna configuration.

When we parse the management frame we look at the category
in case it is an action frame. That byte sits after the IV
in case the frame was encrypted. This means that if the
frame was encrypted, we basically look at the IV instead
of looking at the category. It is then theorically
possible that we think that an SMPS action frame was acked
where really we had another frame that was encrypted.

Since the only management frame whose ack needs to be
tracked is the SMPS action frame, and that frame is not
a robust management frame, it will never be encrypted.
The easiest way to fix this problem is then to not look
at frames that were encrypted.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/status.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -200,6 +200,7 @@ static void ieee80211_frame_acked(struct
 	}
 
 	if (ieee80211_is_action(mgmt->frame_control) &&
+	    !ieee80211_has_protected(mgmt->frame_control) &&
 	    mgmt->u.action.category == WLAN_CATEGORY_HT &&
 	    mgmt->u.action.u.ht_smps.action == WLAN_HT_ACTION_SMPS &&
 	    ieee80211_sdata_running(sdata)) {

[PATCH 4.9 081/177] ACPICA: iasl: Fix IORT SMMU GSI disassembling

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lv Zheng <lv.zheng@intel.com>


[ Upstream commit bb1e23e66e6237ff7a1824b37366540a89149c33 ]

ACPICA commit 637b88de24a78c20478728d9d66632b06fcaa5bf

If the IORT template is compiled and then iort.aml binary disassembled to
iort.dsl, SMMUv1 node lists incorrect offset for SMMU_Nsg_cfg_irpt Interrupt:
[0ECh 0236   8]       SMMU_Nsg_irpt Interrupt : 0000000000000000
[0ECh 0236   8]    SMMU_Nsg_cfg_irpt Interrupt : 0000000000000000
This is because iasl hasn't implemented SMMU GSI decoding yet.

This patch fixes this issue by preparing structures for decoding IORT SMMU
GSI. ACPICA BZ 1340, reported by Alexei Fedorov, fixed by Lv Zheng.

Link: https://github.com/acpica/acpica/commit/637b88de
Link: https://bugs.acpica.org/show_bug.cgi?id=1340
Reported-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/acpi/actbl2.h |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/include/acpi/actbl2.h
+++ b/include/acpi/actbl2.h
@@ -783,6 +783,15 @@ struct acpi_iort_smmu {
 #define ACPI_IORT_SMMU_DVM_SUPPORTED    (1)
 #define ACPI_IORT_SMMU_COHERENT_WALK    (1<<1)
 
+/* Global interrupt format */
+
+struct acpi_iort_smmu_gsi {
+	u32 nsg_irpt;
+	u32 nsg_irpt_flags;
+	u32 nsg_cfg_irpt;
+	u32 nsg_cfg_irpt_flags;
+};
+
 struct acpi_iort_smmu_v3 {
 	u64 base_address;	/* SMMUv3 base address */
 	u32 flags;

[PATCH 4.9 082/177] iio: hid-sensor: fix return of -EINVAL on invalid values in ret or value

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>


[ Upstream commit c894acc7bf400d039bf740420b22f0b71b7fb504 ]

Ensure that when an invalid value in ret or value is found -EINVAL
is returned. A previous commit broke the way the return error is
being returned and instead caused the return code in ret to be
re-assigned rather than be returned.

Fixes: 5d9854eaea776 ("iio: hid-sensor: Store restore poll and hysteresis on S3")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iio/common/hid-sensors/hid-sensor-attributes.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
@@ -215,7 +215,7 @@ int hid_sensor_write_samp_freq_value(str
 	ret = sensor_hub_set_feature(st->hsdev, st->poll.report_id,
 				     st->poll.index, sizeof(value), &value);
 	if (ret < 0 || value < 0)
-		ret = -EINVAL;
+		return -EINVAL;
 
 	ret = sensor_hub_get_feature(st->hsdev,
 				     st->poll.report_id,
@@ -265,7 +265,7 @@ int hid_sensor_write_raw_hyst_value(stru
 				     st->sensitivity.index, sizeof(value),
 				     &value);
 	if (ret < 0 || value < 0)
-		ret = -EINVAL;
+		return -EINVAL;
 
 	ret = sensor_hub_get_feature(st->hsdev,
 				     st->sensitivity.report_id,

[PATCH 4.9 083/177] dt-bindings: mfd: axp20x: Add "xpowers,master-mode" property for AXP806 PMICs

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rask Ingemann Lambertsen <rask@formelder.dk>


[ Upstream commit 8461cf20d17e0090e9236b73d25b31be4f7fadc5 ]

commit b101829a029a ("mfd: axp20x: Fix AXP806 access errors on cold boot")
was intended to fix the case where a board uses an AXP806 in slave mode,
but the boot loader leaves it in master mode for lack of AXP806 support.
But now the driver breaks on boards where the PMIC is operating in master
mode. To let the device tree describe which mode of operation is needed,
this patch introduces a new property "xpowers,master-mode".

Fixes: 204ae2963e10 ("mfd: axp20x: Add bindings for AXP806 PMIC")
Signed-off-by: Rask Ingemann Lambertsen <rask@formelder.dk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/devicetree/bindings/mfd/axp20x.txt |    3 +++
 1 file changed, 3 insertions(+)

--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -28,6 +28,9 @@ Optional properties:
 		  regulator to drive the OTG VBus, rather then as an input pin
 		  which signals whether the board is driving OTG VBus or not.
 
+- x-powers,master-mode: Boolean (axp806 only). Set this when the PMIC is
+			wired for master mode. The default is slave mode.
+
 - <input>-supply: a phandle to the regulator supply node. May be omitted if
 		  inputs are unregulated, such as using the IPSOUT output
 		  from the PMIC.

[PATCH 4.9 084/177] mfd: palmas: Reset the POWERHOLD mux during power off

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Keerthy <j-keerthy@ti.com>


[ Upstream commit 85fdaf8eb9bbec1f0f8a52fd5d85659d60738816 ]

POWERHOLD signal has higher priority  over the DEV_ON bit.
So power off will not happen if the POWERHOLD is held high.
Hence reset the MUX to GPIO_7 mode to release the POWERHOLD
and the DEV_ON bit to take effect to power off the PMIC.

PMIC Power off happens in dire situations like thermal shutdown
so irrespective of the POWERHOLD setting go ahead and turn off
the powerhold.  Currently poweroff is broken on boards that have
powerhold enabled. This fixes poweroff on those boards.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mfd/palmas.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/mfd/palmas.c
+++ b/drivers/mfd/palmas.c
@@ -430,6 +430,20 @@ static void palmas_power_off(void)
 {
 	unsigned int addr;
 	int ret, slave;
+	struct device_node *np = palmas_dev->dev->of_node;
+
+	if (of_property_read_bool(np, "ti,palmas-override-powerhold")) {
+		addr = PALMAS_BASE_TO_REG(PALMAS_PU_PD_OD_BASE,
+					  PALMAS_PRIMARY_SECONDARY_PAD2);
+		slave = PALMAS_BASE_TO_SLAVE(PALMAS_PU_PD_OD_BASE);
+
+		ret = regmap_update_bits(palmas_dev->regmap[slave], addr,
+				PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_MASK, 0);
+		if (ret)
+			dev_err(palmas_dev->dev,
+				"Unable to write PRIMARY_SECONDARY_PAD2 %d\n",
+				ret);
+	}
 
 	if (!palmas_dev)
 		return;

[PATCH 4.9 085/177] mtip32xx: use runtime tag to initialize command header

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ming Lei <ming.lei@redhat.com>


[ Upstream commit a4e84aae8139aca9fbfbced1f45c51ca81b57488 ]

mtip32xx supposes that 'request_idx' passed to .init_request()
is tag of the request, and use that as request's tag to initialize
command header.

After MQ IO scheduler is in, request tag assigned isn't same with
the request index anymore, so cause strange hardware failure on
mtip32xx, even whole system panic is triggered.

This patch fixes the issue by initializing command header via
request's real tag.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/mtip32xx/mtip32xx.c |   36 ++++++++++++++++++++++++------------
 1 file changed, 24 insertions(+), 12 deletions(-)

--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -169,6 +169,25 @@ static bool mtip_check_surprise_removal(
 	return false; /* device present */
 }
 
+/* we have to use runtime tag to setup command header */
+static void mtip_init_cmd_header(struct request *rq)
+{
+	struct driver_data *dd = rq->q->queuedata;
+	struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
+	u32 host_cap_64 = readl(dd->mmio + HOST_CAP) & HOST_CAP_64;
+
+	/* Point the command headers at the command tables. */
+	cmd->command_header = dd->port->command_list +
+				(sizeof(struct mtip_cmd_hdr) * rq->tag);
+	cmd->command_header_dma = dd->port->command_list_dma +
+				(sizeof(struct mtip_cmd_hdr) * rq->tag);
+
+	if (host_cap_64)
+		cmd->command_header->ctbau = __force_bit2int cpu_to_le32((cmd->command_dma >> 16) >> 16);
+
+	cmd->command_header->ctba = __force_bit2int cpu_to_le32(cmd->command_dma & 0xFFFFFFFF);
+}
+
 static struct mtip_cmd *mtip_get_int_command(struct driver_data *dd)
 {
 	struct request *rq;
@@ -180,6 +199,9 @@ static struct mtip_cmd *mtip_get_int_com
 	if (IS_ERR(rq))
 		return NULL;
 
+	/* Internal cmd isn't submitted via .queue_rq */
+	mtip_init_cmd_header(rq);
+
 	return blk_mq_rq_to_pdu(rq);
 }
 
@@ -3811,6 +3833,8 @@ static int mtip_queue_rq(struct blk_mq_h
 	struct request *rq = bd->rq;
 	int ret;
 
+	mtip_init_cmd_header(rq);
+
 	if (unlikely(mtip_check_unal_depth(hctx, rq)))
 		return BLK_MQ_RQ_QUEUE_BUSY;
 
@@ -3842,7 +3866,6 @@ static int mtip_init_cmd(void *data, str
 {
 	struct driver_data *dd = data;
 	struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
-	u32 host_cap_64 = readl(dd->mmio + HOST_CAP) & HOST_CAP_64;
 
 	/*
 	 * For flush requests, request_idx starts at the end of the
@@ -3859,17 +3882,6 @@ static int mtip_init_cmd(void *data, str
 
 	memset(cmd->command, 0, CMD_DMA_ALLOC_SZ);
 
-	/* Point the command headers at the command tables. */
-	cmd->command_header = dd->port->command_list +
-				(sizeof(struct mtip_cmd_hdr) * request_idx);
-	cmd->command_header_dma = dd->port->command_list_dma +
-				(sizeof(struct mtip_cmd_hdr) * request_idx);
-
-	if (host_cap_64)
-		cmd->command_header->ctbau = __force_bit2int cpu_to_le32((cmd->command_dma >> 16) >> 16);
-
-	cmd->command_header->ctba = __force_bit2int cpu_to_le32(cmd->command_dma & 0xFFFFFFFF);
-
 	sg_init_table(cmd->sg, MTIP_MAX_SG);
 	return 0;
 }

[PATCH 4.9 086/177] x86/KASLR: Fix kexec kernel boot crash when KASLR randomization fails

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Baoquan He <bhe@redhat.com>


[ Upstream commit da63b6b20077469bd6bd96e07991ce145fc4fbc4 ]

Dave found that a kdump kernel with KASLR enabled will reset to the BIOS
immediately if physical randomization failed to find a new position for
the kernel. A kernel with the 'nokaslr' option works in this case.

The reason is that KASLR will install a new page table for the identity
mapping, while it missed building it for the original kernel location
if KASLR physical randomization fails.

This only happens in the kexec/kdump kernel, because the identity mapping
has been built for kexec/kdump in the 1st kernel for the whole memory by
calling init_pgtable(). Here if physical randomizaiton fails, it won't build
the identity mapping for the original area of the kernel but change to a
new page table '_pgtable'. Then the kernel will triple fault immediately
caused by no identity mappings.

The normal kernel won't see this bug, because it comes here via startup_32()
and CR3 will be set to _pgtable already. In startup_32() the identity
mapping is built for the 0~4G area. In KASLR we just append to the existing
area instead of entirely overwriting it for on-demand identity mapping
building. So the identity mapping for the original area of kernel is still
there.

To fix it we just switch to the new identity mapping page table when physical
KASLR succeeds. Otherwise we keep the old page table unchanged just like
"nokaslr" does.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1493278940-5885-1-git-send-email-bhe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/boot/compressed/kaslr.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/arch/x86/boot/compressed/kaslr.c
+++ b/arch/x86/boot/compressed/kaslr.c
@@ -460,10 +460,17 @@ void choose_random_location(unsigned lon
 			add_identity_map(random_addr, output_size);
 			*output = random_addr;
 		}
+
+		/*
+		 * This loads the identity mapping page table.
+		 * This should only be done if a new physical address
+		 * is found for the kernel, otherwise we should keep
+		 * the old page table to make it be like the "nokaslr"
+		 * case.
+		 */
+		finalize_identity_maps();
 	}
 
-	/* This actually loads the identity pagetable on x86_64. */
-	finalize_identity_maps();
 
 	/* Pick random virtual address starting from LOAD_PHYSICAL_ADDR. */
 	if (IS_ENABLED(CONFIG_X86_64))

[PATCH 4.9 087/177] gpio: gpio-wcove: fix GPIO IRQ status mask

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>


[ Upstream commit 881ebd229f4a5ea88f269c1225245e50db9ba303 ]

According to Whiskey Cove PMIC spec, bit 7 of GPIOIRQ0_REG belongs to
battery IO. So we should skip this bit when checking for GPIO IRQ pending
status. Otherwise, wcove_gpio_irq_handler() might go into the infinite
loop until IRQ "pending" status becomes 0. This patch fixes this issue.

Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpio/gpio-wcove.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/gpio/gpio-wcove.c
+++ b/drivers/gpio/gpio-wcove.c
@@ -51,6 +51,8 @@
 #define GROUP1_NR_IRQS		6
 #define IRQ_MASK_BASE		0x4e19
 #define IRQ_STATUS_BASE		0x4e0b
+#define GPIO_IRQ0_MASK		GENMASK(6, 0)
+#define GPIO_IRQ1_MASK		GENMASK(5, 0)
 #define UPDATE_IRQ_TYPE		BIT(0)
 #define UPDATE_IRQ_MASK		BIT(1)
 
@@ -310,7 +312,7 @@ static irqreturn_t wcove_gpio_irq_handle
 		return IRQ_NONE;
 	}
 
-	pending = p[0] | (p[1] << 8);
+	pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7);
 	if (!pending)
 		return IRQ_NONE;
 
@@ -334,7 +336,7 @@ static irqreturn_t wcove_gpio_irq_handle
 			break;
 		}
 
-		pending = p[0] | (p[1] << 8);
+		pending = (p[0] & GPIO_IRQ0_MASK) | ((p[1] & GPIO_IRQ1_MASK) << 7);
 	}
 
 	return IRQ_HANDLED;

[PATCH 4.9 088/177] staging: unisys: visorhba: fix s-Par to boot with option CONFIG_VMAP_STACK set to y

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>


[ Upstream commit 3c2bf0bd08123f3497bd3e84bd9088c937b0cb40 ]

The root issue is that we are not allowed to have items on the
stack being passed to "DMA" like operations. In this case we have
a vmcall and an inline completion of scsi command.

This patch fixes the issue by moving the variables on stack in
do_scsi_nolinuxstat() to heap memory.

Signed-off-by: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/unisys/visorhba/visorhba_main.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/staging/unisys/visorhba/visorhba_main.c
+++ b/drivers/staging/unisys/visorhba/visorhba_main.c
@@ -842,7 +842,7 @@ static void
 do_scsi_nolinuxstat(struct uiscmdrsp *cmdrsp, struct scsi_cmnd *scsicmd)
 {
 	struct scsi_device *scsidev;
-	unsigned char buf[36];
+	unsigned char *buf;
 	struct scatterlist *sg;
 	unsigned int i;
 	char *this_page;
@@ -857,6 +857,10 @@ do_scsi_nolinuxstat(struct uiscmdrsp *cm
 		if (cmdrsp->scsi.no_disk_result == 0)
 			return;
 
+		buf = kzalloc(sizeof(char) * 36, GFP_KERNEL);
+		if (!buf)
+			return;
+
 		/* Linux scsi code wants a device at Lun 0
 		 * to issue report luns, but we don't want
 		 * a disk there so we'll present a processor
@@ -868,6 +872,7 @@ do_scsi_nolinuxstat(struct uiscmdrsp *cm
 		if (scsi_sg_count(scsicmd) == 0) {
 			memcpy(scsi_sglist(scsicmd), buf,
 			       cmdrsp->scsi.bufflen);
+			kfree(buf);
 			return;
 		}
 
@@ -879,6 +884,7 @@ do_scsi_nolinuxstat(struct uiscmdrsp *cm
 			memcpy(this_page, buf + bufind, sg[i].length);
 			kunmap_atomic(this_page_orig);
 		}
+		kfree(buf);
 	} else {
 		devdata = (struct visorhba_devdata *)scsidev->host->hostdata;
 		for_each_vdisk_match(vdisk, devdata, scsidev) {

[PATCH 4.9 089/177] staging: wilc1000: fix unchecked return value

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pan Bian <bianpan2016@163.com>


[ Upstream commit 9e96652756ad647b7bcc03cb99ffc9756d7b5f93 ]

Function dev_alloc_skb() will return a NULL pointer if there is no
enough memory. However, in function WILC_WFI_mon_xmit(), its return
value is used without validation. This may result in a bad memory access
bug. This patch fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/wilc1000/linux_mon.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/staging/wilc1000/linux_mon.c
+++ b/drivers/staging/wilc1000/linux_mon.c
@@ -197,6 +197,8 @@ static netdev_tx_t WILC_WFI_mon_xmit(str
 
 	if (skb->data[0] == 0xc0 && (!(memcmp(broadcast, &skb->data[4], 6)))) {
 		skb2 = dev_alloc_skb(skb->len + sizeof(struct wilc_wfi_radiotap_cb_hdr));
+		if (!skb2)
+			return -ENOMEM;
 
 		memcpy(skb_put(skb2, skb->len), skb->data, skb->len);
 

[PATCH 4.9 090/177] ipvs: explicitly forbid ipv6 service/dest creation if ipv6 mod is disabled

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <pabeni@redhat.com>


[ Upstream commit 1442f6f7c1b77de1c508318164a527e240c24a4d ]

When creating a new ipvs service, ipv6 addresses are always accepted
if CONFIG_IP_VS_IPV6 is enabled. On dest creation the address family
is not explicitly checked.

This allows the user-space to configure ipvs services even if the
system is booted with ipv6.disable=1. On specific configuration, ipvs
can try to call ipv6 routing code at setup time, causing the kernel to
oops due to fib6_rules_ops being NULL.

This change addresses the issue adding a check for the ipv6
module being enabled while validating ipv6 service operations and
adding the same validation for dest operations.

According to git history, this issue is apparently present since
the introduction of ipv6 support, and the oops can be triggered
since commit 09571c7ae30865ad ("IPVS: Add function to determine
if IPv6 address is local")

Fixes: 09571c7ae30865ad ("IPVS: Add function to determine if IPv6 address is local")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/ipvs/ip_vs_ctl.c |   22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -3092,6 +3092,17 @@ nla_put_failure:
 	return skb->len;
 }
 
+static bool ip_vs_is_af_valid(int af)
+{
+	if (af == AF_INET)
+		return true;
+#ifdef CONFIG_IP_VS_IPV6
+	if (af == AF_INET6 && ipv6_mod_enabled())
+		return true;
+#endif
+	return false;
+}
+
 static int ip_vs_genl_parse_service(struct netns_ipvs *ipvs,
 				    struct ip_vs_service_user_kern *usvc,
 				    struct nlattr *nla, int full_entry,
@@ -3118,11 +3129,7 @@ static int ip_vs_genl_parse_service(stru
 	memset(usvc, 0, sizeof(*usvc));
 
 	usvc->af = nla_get_u16(nla_af);
-#ifdef CONFIG_IP_VS_IPV6
-	if (usvc->af != AF_INET && usvc->af != AF_INET6)
-#else
-	if (usvc->af != AF_INET)
-#endif
+	if (!ip_vs_is_af_valid(usvc->af))
 		return -EAFNOSUPPORT;
 
 	if (nla_fwmark) {
@@ -3624,6 +3631,11 @@ static int ip_vs_genl_set_cmd(struct sk_
 		if (udest.af == 0)
 			udest.af = svc->af;
 
+		if (!ip_vs_is_af_valid(udest.af)) {
+			ret = -EAFNOSUPPORT;
+			goto out;
+		}
+
 		if (udest.af != svc->af && cmd != IPVS_CMD_DEL_DEST) {
 			/* The synchronization protocol is incompatible
 			 * with mixed family services

[PATCH 4.9 091/177] mac80211: Fix possible sband related NULL pointer de-reference

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>


[ Upstream commit 21a8e9dd52b64f0170bad208293ef8c30c3c1403 ]

Existing API 'ieee80211_get_sdata_band' returns default 2 GHz band even
if the channel context configuration is NULL. This crashes for chipsets
which support 5 Ghz alone when it tries to access members of 'sband'.
Channel context configuration can be NULL in multivif case and when
channel switch is in progress (or) when it fails. Fix this by replacing
the API 'ieee80211_get_sdata_band' with  'ieee80211_get_sband' which
returns a NULL pointer for sband when the channel configuration is NULL.

An example scenario is as below:

In multivif mode (AP + STA) with drivers like ath10k, when we do a
channel switch in the AP vif (which has a number of clients connected)
and a STA vif which is connected to some other AP, when the channel
switch in AP vif fails, while the STA vifs tries to connect to the
other AP, there is a window where the channel context is NULL/invalid
and this results in a crash  while the clients connected to the AP vif
tries to reconnect and this race is very similar to the one investigated
by Michal in https://patchwork.kernel.org/patch/3788161/ and this does
happens with hardware that supports 5Ghz alone after long hours of
testing with continuous channel switch on the AP vif

ieee80211 phy0: channel context reservation cannot be finalized because
some interfaces aren't switching
wlan0: failed to finalize CSA, disconnecting
wlan0-1: deauthenticating from 8c:fd:f0:01:54:9c by local choice
	(Reason: 3=DEAUTH_LEAVING)

	WARNING: CPU: 1 PID: 19032 at net/mac80211/ieee80211_i.h:1013 sta_info_alloc+0x374/0x3fc [mac80211]
	[<bf77272c>] (sta_info_alloc [mac80211])
	[<bf78776c>] (ieee80211_add_station [mac80211]))
	[<bf73cc50>] (nl80211_new_station [cfg80211])

	Unable to handle kernel NULL pointer dereference at virtual
	address 00000014
	pgd = d5f4c000
	Internal error: Oops: 17 [#1] PREEMPT SMP ARM
	PC is at sta_info_alloc+0x380/0x3fc [mac80211]
	LR is at sta_info_alloc+0x37c/0x3fc [mac80211]
	[<bf772738>] (sta_info_alloc [mac80211])
	[<bf78776c>] (ieee80211_add_station [mac80211])
	[<bf73cc50>] (nl80211_new_station [cfg80211]))

Cc: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/cfg.c         |   30 +++++++++++++++++-------------
 net/mac80211/ibss.c        |    6 +++++-
 net/mac80211/ieee80211_i.h |   36 +++++++++++++++++++++---------------
 net/mac80211/mesh.c        |   29 ++++++++++++++++++++---------
 net/mac80211/mesh_plink.c  |   37 ++++++++++++++++++++++++++-----------
 net/mac80211/mlme.c        |   14 ++++++++++++--
 net/mac80211/rate.c        |    4 +++-
 net/mac80211/sta_info.c    |   13 +++++++++----
 net/mac80211/tdls.c        |   29 +++++++++++++++++++----------
 net/mac80211/tx.c          |    5 ++++-
 net/mac80211/util.c        |    6 +++---
 11 files changed, 139 insertions(+), 70 deletions(-)

--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -620,10 +620,11 @@ void sta_set_rate_info_tx(struct sta_inf
 		int shift = ieee80211_vif_get_shift(&sta->sdata->vif);
 		u16 brate;
 
-		sband = sta->local->hw.wiphy->bands[
-				ieee80211_get_sdata_band(sta->sdata)];
-		brate = sband->bitrates[rate->idx].bitrate;
-		rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift);
+		sband = ieee80211_get_sband(sta->sdata);
+		if (sband) {
+			brate = sband->bitrates[rate->idx].bitrate;
+			rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift);
+		}
 	}
 	if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
 		rinfo->bw = RATE_INFO_BW_40;
@@ -1218,10 +1219,11 @@ static int sta_apply_parameters(struct i
 	int ret = 0;
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
-	enum nl80211_band band = ieee80211_get_sdata_band(sdata);
 	u32 mask, set;
 
-	sband = local->hw.wiphy->bands[band];
+	sband = ieee80211_get_sband(sdata);
+	if (!sband)
+		return -EINVAL;
 
 	mask = params->sta_flags_mask;
 	set = params->sta_flags_set;
@@ -1354,7 +1356,7 @@ static int sta_apply_parameters(struct i
 		ieee80211_parse_bitrates(&sdata->vif.bss_conf.chandef,
 					 sband, params->supported_rates,
 					 params->supported_rates_len,
-					 &sta->sta.supp_rates[band]);
+					 &sta->sta.supp_rates[sband->band]);
 	}
 
 	if (params->ht_capa)
@@ -1370,8 +1372,8 @@ static int sta_apply_parameters(struct i
 		/* returned value is only needed for rc update, but the
 		 * rc isn't initialized here yet, so ignore it
 		 */
-		__ieee80211_vht_handle_opmode(sdata, sta,
-					      params->opmode_notif, band);
+		__ieee80211_vht_handle_opmode(sdata, sta, params->opmode_notif,
+					      sband->band);
 	}
 
 	if (params->support_p2p_ps >= 0)
@@ -2017,13 +2019,15 @@ static int ieee80211_change_bss(struct w
 				struct bss_parameters *params)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-	enum nl80211_band band;
+	struct ieee80211_supported_band *sband;
 	u32 changed = 0;
 
 	if (!sdata_dereference(sdata->u.ap.beacon, sdata))
 		return -ENOENT;
 
-	band = ieee80211_get_sdata_band(sdata);
+	sband = ieee80211_get_sband(sdata);
+	if (!sband)
+		return -EINVAL;
 
 	if (params->use_cts_prot >= 0) {
 		sdata->vif.bss_conf.use_cts_prot = params->use_cts_prot;
@@ -2036,7 +2040,7 @@ static int ieee80211_change_bss(struct w
 	}
 
 	if (!sdata->vif.bss_conf.use_short_slot &&
-	    band == NL80211_BAND_5GHZ) {
+	    sband->band == NL80211_BAND_5GHZ) {
 		sdata->vif.bss_conf.use_short_slot = true;
 		changed |= BSS_CHANGED_ERP_SLOT;
 	}
@@ -2049,7 +2053,7 @@ static int ieee80211_change_bss(struct w
 
 	if (params->basic_rates) {
 		ieee80211_parse_bitrates(&sdata->vif.bss_conf.chandef,
-					 wiphy->bands[band],
+					 wiphy->bands[sband->band],
 					 params->basic_rates,
 					 params->basic_rates_len,
 					 &sdata->vif.bss_conf.basic_rates);
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -994,7 +994,7 @@ static void ieee80211_update_sta_info(st
 	enum nl80211_band band = rx_status->band;
 	enum nl80211_bss_scan_width scan_width;
 	struct ieee80211_local *local = sdata->local;
-	struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
+	struct ieee80211_supported_band *sband;
 	bool rates_updated = false;
 	u32 supp_rates = 0;
 
@@ -1004,6 +1004,10 @@ static void ieee80211_update_sta_info(st
 	if (!ether_addr_equal(mgmt->bssid, sdata->u.ibss.bssid))
 		return;
 
+	sband = local->hw.wiphy->bands[band];
+	if (WARN_ON(!sband))
+		return;
+
 	rcu_read_lock();
 	sta = sta_info_get(sdata, mgmt->sa);
 
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -991,21 +991,6 @@ sdata_assert_lock(struct ieee80211_sub_i
 	lockdep_assert_held(&sdata->wdev.mtx);
 }
 
-static inline enum nl80211_band
-ieee80211_get_sdata_band(struct ieee80211_sub_if_data *sdata)
-{
-	enum nl80211_band band = NL80211_BAND_2GHZ;
-	struct ieee80211_chanctx_conf *chanctx_conf;
-
-	rcu_read_lock();
-	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
-	if (!WARN_ON(!chanctx_conf))
-		band = chanctx_conf->def.chan->band;
-	rcu_read_unlock();
-
-	return band;
-}
-
 static inline int
 ieee80211_chandef_get_shift(struct cfg80211_chan_def *chandef)
 {
@@ -1410,6 +1395,27 @@ IEEE80211_WDEV_TO_SUB_IF(struct wireless
 	return container_of(wdev, struct ieee80211_sub_if_data, wdev);
 }
 
+static inline struct ieee80211_supported_band *
+ieee80211_get_sband(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_chanctx_conf *chanctx_conf;
+	enum nl80211_band band;
+
+	rcu_read_lock();
+	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
+
+	if (WARN_ON(!chanctx_conf)) {
+		rcu_read_unlock();
+		return NULL;
+	}
+
+	band = chanctx_conf->def.chan->band;
+	rcu_read_unlock();
+
+	return local->hw.wiphy->bands[band];
+}
+
 /* this struct represents 802.11n's RA/TID combination */
 struct ieee80211_ra_tid {
 	u8 ra[ETH_ALEN];
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -63,6 +63,7 @@ bool mesh_matches_local(struct ieee80211
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	u32 basic_rates = 0;
 	struct cfg80211_chan_def sta_chan_def;
+	struct ieee80211_supported_band *sband;
 
 	/*
 	 * As support for each feature is added, check for matching
@@ -83,7 +84,11 @@ bool mesh_matches_local(struct ieee80211
 	     (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth)))
 		return false;
 
-	ieee80211_sta_get_rates(sdata, ie, ieee80211_get_sdata_band(sdata),
+	sband = ieee80211_get_sband(sdata);
+	if (!sband)
+		return false;
+
+	ieee80211_sta_get_rates(sdata, ie, sband->band,
 				&basic_rates);
 
 	if (sdata->vif.bss_conf.basic_rates != basic_rates)
@@ -399,12 +404,13 @@ static int mesh_add_ds_params_ie(struct
 int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata,
 		       struct sk_buff *skb)
 {
-	struct ieee80211_local *local = sdata->local;
-	enum nl80211_band band = ieee80211_get_sdata_band(sdata);
 	struct ieee80211_supported_band *sband;
 	u8 *pos;
 
-	sband = local->hw.wiphy->bands[band];
+	sband = ieee80211_get_sband(sdata);
+	if (!sband)
+		return -EINVAL;
+
 	if (!sband->ht_cap.ht_supported ||
 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
@@ -462,12 +468,13 @@ int mesh_add_ht_oper_ie(struct ieee80211
 int mesh_add_vht_cap_ie(struct ieee80211_sub_if_data *sdata,
 			struct sk_buff *skb)
 {
-	struct ieee80211_local *local = sdata->local;
-	enum nl80211_band band = ieee80211_get_sdata_band(sdata);
 	struct ieee80211_supported_band *sband;
 	u8 *pos;
 
-	sband = local->hw.wiphy->bands[band];
+	sband = ieee80211_get_sband(sdata);
+	if (!sband)
+		return -EINVAL;
+
 	if (!sband->vht_cap.vht_supported ||
 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
@@ -916,12 +923,16 @@ ieee80211_mesh_process_chnswitch(struct
 	struct cfg80211_csa_settings params;
 	struct ieee80211_csa_ie csa_ie;
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
-	enum nl80211_band band = ieee80211_get_sdata_band(sdata);
+	struct ieee80211_supported_band *sband;
 	int err;
 	u32 sta_flags;
 
 	sdata_assert_lock(sdata);
 
+	sband = ieee80211_get_sband(sdata);
+	if (!sband)
+		return false;
+
 	sta_flags = IEEE80211_STA_DISABLE_VHT;
 	switch (sdata->vif.bss_conf.chandef.width) {
 	case NL80211_CHAN_WIDTH_20_NOHT:
@@ -935,7 +946,7 @@ ieee80211_mesh_process_chnswitch(struct
 
 	memset(&params, 0, sizeof(params));
 	memset(&csa_ie, 0, sizeof(csa_ie));
-	err = ieee80211_parse_ch_switch_ie(sdata, elems, band,
+	err = ieee80211_parse_ch_switch_ie(sdata, elems, sband->band,
 					   sta_flags, sdata->vif.addr,
 					   &csa_ie);
 	if (err < 0)
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -93,19 +93,23 @@ static inline void mesh_plink_fsm_restar
 static u32 mesh_set_short_slot_time(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
-	enum nl80211_band band = ieee80211_get_sdata_band(sdata);
-	struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
+	struct ieee80211_supported_band *sband;
 	struct sta_info *sta;
 	u32 erp_rates = 0, changed = 0;
 	int i;
 	bool short_slot = false;
 
-	if (band == NL80211_BAND_5GHZ) {
+	sband = ieee80211_get_sband(sdata);
+	if (!sband)
+		return changed;
+
+	if (sband->band == NL80211_BAND_5GHZ) {
 		/* (IEEE 802.11-2012 19.4.5) */
 		short_slot = true;
 		goto out;
-	} else if (band != NL80211_BAND_2GHZ)
+	} else if (sband->band != NL80211_BAND_2GHZ) {
 		goto out;
+	}
 
 	for (i = 0; i < sband->n_bitrates; i++)
 		if (sband->bitrates[i].flags & IEEE80211_RATE_ERP_G)
@@ -121,7 +125,7 @@ static u32 mesh_set_short_slot_time(stru
 			continue;
 
 		short_slot = false;
-		if (erp_rates & sta->sta.supp_rates[band])
+		if (erp_rates & sta->sta.supp_rates[sband->band])
 			short_slot = true;
 		 else
 			break;
@@ -247,7 +251,15 @@ static int mesh_plink_frame_tx(struct ie
 	mgmt->u.action.u.self_prot.action_code = action;
 
 	if (action != WLAN_SP_MESH_PEERING_CLOSE) {
-		enum nl80211_band band = ieee80211_get_sdata_band(sdata);
+		struct ieee80211_supported_band *sband;
+		enum nl80211_band band;
+
+		sband = ieee80211_get_sband(sdata);
+		if (!sband) {
+			err = -EINVAL;
+			goto free;
+		}
+		band = sband->band;
 
 		/* capability info */
 		pos = skb_put(skb, 2);
@@ -393,13 +405,16 @@ static void mesh_sta_info_init(struct ie
 			       struct ieee802_11_elems *elems, bool insert)
 {
 	struct ieee80211_local *local = sdata->local;
-	enum nl80211_band band = ieee80211_get_sdata_band(sdata);
 	struct ieee80211_supported_band *sband;
 	u32 rates, basic_rates = 0, changed = 0;
 	enum ieee80211_sta_rx_bandwidth bw = sta->sta.bandwidth;
 
-	sband = local->hw.wiphy->bands[band];
-	rates = ieee80211_sta_get_rates(sdata, elems, band, &basic_rates);
+	sband = ieee80211_get_sband(sdata);
+	if (!sband)
+		return;
+
+	rates = ieee80211_sta_get_rates(sdata, elems, sband->band,
+					&basic_rates);
 
 	spin_lock_bh(&sta->mesh->plink_lock);
 	sta->rx_stats.last_rx = jiffies;
@@ -410,9 +425,9 @@ static void mesh_sta_info_init(struct ie
 		goto out;
 	sta->mesh->processed_beacon = true;
 
-	if (sta->sta.supp_rates[band] != rates)
+	if (sta->sta.supp_rates[sband->band] != rates)
 		changed |= IEEE80211_RC_SUPP_RATES_CHANGED;
-	sta->sta.supp_rates[band] = rates;
+	sta->sta.supp_rates[sband->band] = rates;
 
 	if (ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
 					      elems->ht_cap_elem, sta))
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1851,11 +1851,16 @@ static u32 ieee80211_handle_bss_capabili
 					   u16 capab, bool erp_valid, u8 erp)
 {
 	struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
+	struct ieee80211_supported_band *sband;
 	u32 changed = 0;
 	bool use_protection;
 	bool use_short_preamble;
 	bool use_short_slot;
 
+	sband = ieee80211_get_sband(sdata);
+	if (!sband)
+		return changed;
+
 	if (erp_valid) {
 		use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
 		use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
@@ -1865,7 +1870,7 @@ static u32 ieee80211_handle_bss_capabili
 	}
 
 	use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
-	if (ieee80211_get_sdata_band(sdata) == NL80211_BAND_5GHZ)
+	if (sband->band == NL80211_BAND_5GHZ)
 		use_short_slot = true;
 
 	if (use_protection != bss_conf->use_cts_prot) {
@@ -2994,7 +2999,12 @@ static bool ieee80211_assoc_success(stru
 		goto out;
 	}
 
-	sband = local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)];
+	sband = ieee80211_get_sband(sdata);
+	if (!sband) {
+		mutex_unlock(&sdata->local->sta_mtx);
+		ret = false;
+		goto out;
+	}
 
 	/* Set up internal HT/VHT capabilities */
 	if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -875,7 +875,9 @@ int rate_control_set_rates(struct ieee80
 	struct ieee80211_sta_rates *old;
 	struct ieee80211_supported_band *sband;
 
-	sband = hw->wiphy->bands[ieee80211_get_sdata_band(sta->sdata)];
+	sband = ieee80211_get_sband(sta->sdata);
+	if (!sband)
+		return -EINVAL;
 	rate_control_apply_mask_ratetbl(sta, sband, rates);
 	/*
 	 * mac80211 guarantees that this function will not be called
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -395,10 +395,15 @@ struct sta_info *sta_info_alloc(struct i
 	sta->sta.smps_mode = IEEE80211_SMPS_OFF;
 	if (sdata->vif.type == NL80211_IFTYPE_AP ||
 	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
-		struct ieee80211_supported_band *sband =
-			hw->wiphy->bands[ieee80211_get_sdata_band(sdata)];
-		u8 smps = (sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >>
-				IEEE80211_HT_CAP_SM_PS_SHIFT;
+		struct ieee80211_supported_band *sband;
+		u8 smps;
+
+		sband = ieee80211_get_sband(sdata);
+		if (!sband)
+			goto free_txq;
+
+		smps = (sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >>
+			IEEE80211_HT_CAP_SM_PS_SHIFT;
 		/*
 		 * Assume that hostapd advertises our caps in the beacon and
 		 * this is the known_smps_mode for a station that just assciated
--- a/net/mac80211/tdls.c
+++ b/net/mac80211/tdls.c
@@ -47,8 +47,7 @@ static void ieee80211_tdls_add_ext_capab
 			   NL80211_FEATURE_TDLS_CHANNEL_SWITCH;
 	bool wider_band = ieee80211_hw_check(&local->hw, TDLS_WIDER_BW) &&
 			  !ifmgd->tdls_wider_bw_prohibited;
-	enum nl80211_band band = ieee80211_get_sdata_band(sdata);
-	struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band];
+	struct ieee80211_supported_band *sband = ieee80211_get_sband(sdata);
 	bool vht = sband && sband->vht_cap.vht_supported;
 	u8 *pos = (void *)skb_put(skb, 10);
 
@@ -180,11 +179,14 @@ static void ieee80211_tdls_add_bss_coex_
 static u16 ieee80211_get_tdls_sta_capab(struct ieee80211_sub_if_data *sdata,
 					u16 status_code)
 {
+	struct ieee80211_supported_band *sband;
+
 	/* The capability will be 0 when sending a failure code */
 	if (status_code != 0)
 		return 0;
 
-	if (ieee80211_get_sdata_band(sdata) == NL80211_BAND_2GHZ) {
+	sband = ieee80211_get_sband(sdata);
+	if (sband && sband->band == NL80211_BAND_2GHZ) {
 		return WLAN_CAPABILITY_SHORT_SLOT_TIME |
 		       WLAN_CAPABILITY_SHORT_PREAMBLE;
 	}
@@ -358,17 +360,20 @@ ieee80211_tdls_add_setup_start_ies(struc
 				   u8 action_code, bool initiator,
 				   const u8 *extra_ies, size_t extra_ies_len)
 {
-	enum nl80211_band band = ieee80211_get_sdata_band(sdata);
-	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_supported_band *sband;
+	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_sta_ht_cap ht_cap;
 	struct ieee80211_sta_vht_cap vht_cap;
 	struct sta_info *sta = NULL;
 	size_t offset = 0, noffset;
 	u8 *pos;
 
-	ieee80211_add_srates_ie(sdata, skb, false, band);
-	ieee80211_add_ext_srates_ie(sdata, skb, false, band);
+	sband = ieee80211_get_sband(sdata);
+	if (!sband)
+		return;
+
+	ieee80211_add_srates_ie(sdata, skb, false, sband->band);
+	ieee80211_add_ext_srates_ie(sdata, skb, false, sband->band);
 	ieee80211_tdls_add_supp_channels(sdata, skb);
 
 	/* add any custom IEs that go before Extended Capabilities */
@@ -439,7 +444,6 @@ ieee80211_tdls_add_setup_start_ies(struc
 	 * the same on all bands. The specification limits the setup to a
 	 * single HT-cap, so use the current band for now.
 	 */
-	sband = local->hw.wiphy->bands[band];
 	memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap));
 
 	if ((action_code == WLAN_TDLS_SETUP_REQUEST ||
@@ -545,9 +549,13 @@ ieee80211_tdls_add_setup_cfm_ies(struct
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	size_t offset = 0, noffset;
 	struct sta_info *sta, *ap_sta;
-	enum nl80211_band band = ieee80211_get_sdata_band(sdata);
+	struct ieee80211_supported_band *sband;
 	u8 *pos;
 
+	sband = ieee80211_get_sband(sdata);
+	if (!sband)
+		return;
+
 	mutex_lock(&local->sta_mtx);
 
 	sta = sta_info_get(sdata, peer);
@@ -612,7 +620,8 @@ ieee80211_tdls_add_setup_cfm_ies(struct
 	ieee80211_tdls_add_link_ie(sdata, skb, peer, initiator);
 
 	/* only include VHT-operation if not on the 2.4GHz band */
-	if (band != NL80211_BAND_2GHZ && sta->sta.vht_cap.vht_supported) {
+	if (sband->band != NL80211_BAND_2GHZ &&
+	    sta->sta.vht_cap.vht_supported) {
 		/*
 		 * if both peers support WIDER_BW, we can expand the chandef to
 		 * a wider compatible one, up to 80MHz
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -4182,7 +4182,10 @@ struct sk_buff *ieee80211_beacon_get_tim
 		return bcn;
 
 	shift = ieee80211_vif_get_shift(vif);
-	sband = hw->wiphy->bands[ieee80211_get_sdata_band(vif_to_sdata(vif))];
+	sband = ieee80211_get_sband(vif_to_sdata(vif));
+	if (!sband)
+		return bcn;
+
 	ieee80211_tx_monitor(hw_to_local(hw), copy, sband, 1, shift, false);
 
 	return bcn;
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1590,14 +1590,14 @@ u32 ieee80211_sta_get_rates(struct ieee8
 	size_t num_rates;
 	u32 supp_rates, rate_flags;
 	int i, j, shift;
+
 	sband = sdata->local->hw.wiphy->bands[band];
+	if (WARN_ON(!sband))
+		return 1;
 
 	rate_flags = ieee80211_chandef_rate_flags(&sdata->vif.bss_conf.chandef);
 	shift = ieee80211_vif_get_shift(&sdata->vif);
 
-	if (WARN_ON(!sband))
-		return 1;
-
 	num_rates = sband->n_bitrates;
 	supp_rates = 0;
 	for (i = 0; i < elems->supp_rates_len +

[PATCH 4.9 092/177] mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: yangbo lu <yangbo.lu@nxp.com>


[ Upstream commit a627f025eb0534052ff451427c16750b3530634c ]

The ls1046a datasheet specified that the max SD clock frequency
for eSDHC SDR104/HS200 was 167MHz, and the ls1012a datasheet
specified it's 125MHz for ls1012a. So this patch is to add the
limitation.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci-of-esdhc.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -432,6 +432,20 @@ static void esdhc_of_set_clock(struct sd
 	if (esdhc->vendor_ver < VENDOR_V_23)
 		pre_div = 2;
 
+	/*
+	 * Limit SD clock to 167MHz for ls1046a according to its datasheet
+	 */
+	if (clock > 167000000 &&
+	    of_find_compatible_node(NULL, NULL, "fsl,ls1046a-esdhc"))
+		clock = 167000000;
+
+	/*
+	 * Limit SD clock to 125MHz for ls1012a according to its datasheet
+	 */
+	if (clock > 125000000 &&
+	    of_find_compatible_node(NULL, NULL, "fsl,ls1012a-esdhc"))
+		clock = 125000000;
+
 	/* Workaround to reduce the clock frequency for p1010 esdhc */
 	if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
 		if (clock > 20000000)

[PATCH 4.9 093/177] netfilter: x_tables: unlock on error in xt_find_table_lock()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>


[ Upstream commit 7dde07e9c53617549d67dd3e1d791496d0d3868e ]

According to my static checker we should unlock here before the return.
That seems reasonable to me as well.

Fixes" b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/netfilter/x_tables.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -1006,8 +1006,10 @@ struct xt_table *xt_find_table_lock(stru
 	list_for_each_entry(t, &init_net.xt.tables[af], list) {
 		if (strcmp(t->name, name))
 			continue;
-		if (!try_module_get(t->me))
+		if (!try_module_get(t->me)) {
+			mutex_unlock(&xt[af].mutex);
 			return NULL;
+		}
 
 		mutex_unlock(&xt[af].mutex);
 		if (t->table_init(net) != 0) {

[PATCH 4.9 094/177] ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kishon Vijay Abraham I <kishon@ti.com>


[ Upstream commit 2c949ce38f4e81d7487f165fa3b8f77d74a2a6c4 ]

The PCIe programming sequence in TRM suggests CLKSTCTRL of PCIe should be
set to SW_WKUP. There are no issues when CLKSTCTRL is set to HW_AUTO in RC
mode. However in EP mode, the host system is not able to access the
MEMSPACE and setting the CLKSTCTRL to SW_WKUP fixes it.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-omap2/clockdomains7xx_data.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/mach-omap2/clockdomains7xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains7xx_data.c
@@ -524,7 +524,7 @@ static struct clockdomain pcie_7xx_clkdm
 	.dep_bit	  = DRA7XX_PCIE_STATDEP_SHIFT,
 	.wkdep_srcs	  = pcie_wkup_sleep_deps,
 	.sleepdep_srcs	  = pcie_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain atl_7xx_clkdm = {

[PATCH 4.9 095/177] IB/rdmavt: restore IRQs on error path in rvt_create_ah()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>


[ Upstream commit f0bb2d44ca26b7090dc7bade8877b77005f07dfc ]

We need to call spin_unlock_irqrestore() instead of vanilla
spin_unlock() on this error path.

Fixes: 119a8e708d16 ("IB/rdmavt: Add AH to rdmavt")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/sw/rdmavt/ah.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/sw/rdmavt/ah.c
+++ b/drivers/infiniband/sw/rdmavt/ah.c
@@ -119,7 +119,7 @@ struct ib_ah *rvt_create_ah(struct ib_pd
 
 	spin_lock_irqsave(&dev->n_ahs_lock, flags);
 	if (dev->n_ahs_allocated == dev->dparms.props.max_ah) {
-		spin_unlock(&dev->n_ahs_lock);
+		spin_unlock_irqrestore(&dev->n_ahs_lock, flags);
 		kfree(ah);
 		return ERR_PTR(-ENOMEM);
 	}

[PATCH 4.9 096/177] IB/hfi1: Fix softlockup issue

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tadeusz Struk <tadeusz.struk@intel.com>


[ Upstream commit 22546b741af8355cd2e16739b6af4a8f17081839 ]

Soft lockups can occur because the mad processing on different CPUs acquire
the spin lock dc8051_lock:

[534552.835870]  [<ffffffffa026f993>] ? read_dev_port_cntr.isra.37+0x23/0x160 [hfi1]
[534552.835880]  [<ffffffffa02775af>] read_dev_cntr+0x4f/0x60 [hfi1]
[534552.835893]  [<ffffffffa028d7cd>] pma_get_opa_portstatus+0x64d/0x8c0 [hfi1]
[534552.835904]  [<ffffffffa0290e7d>] hfi1_process_mad+0x48d/0x18c0 [hfi1]
[534552.835908]  [<ffffffff811dc1f1>] ? __slab_free+0x81/0x2f0
[534552.835936]  [<ffffffffa024c34e>] ? ib_mad_recv_done+0x21e/0xa30 [ib_core]
[534552.835939]  [<ffffffff811dd153>] ? __kmalloc+0x1f3/0x240
[534552.835947]  [<ffffffffa024c3fb>] ib_mad_recv_done+0x2cb/0xa30 [ib_core]
[534552.835955]  [<ffffffffa0237c85>] __ib_process_cq+0x55/0xd0 [ib_core]
[534552.835962]  [<ffffffffa0237d70>] ib_cq_poll_work+0x20/0x60 [ib_core]
[534552.835964]  [<ffffffff810a7f3b>] process_one_work+0x17b/0x470
[534552.835966]  [<ffffffff810a8d76>] worker_thread+0x126/0x410
[534552.835969]  [<ffffffff810a8c50>] ? rescuer_thread+0x460/0x460
[534552.835971]  [<ffffffff810b052f>] kthread+0xcf/0xe0
[534552.835974]  [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140
[534552.835977]  [<ffffffff81696418>] ret_from_fork+0x58/0x90
[534552.835980]  [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140

This issue is made worse when the 8051 is busy and the reads take longer.
Fix by using a non-spinning lock procure.

Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciszyn <mike.marciniszyn@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/hfi1/chip.c |   86 ++++++++++++++++++++++----------------
 drivers/infiniband/hw/hfi1/hfi.h  |    7 +--
 drivers/infiniband/hw/hfi1/init.c |    2 
 3 files changed, 57 insertions(+), 38 deletions(-)

--- a/drivers/infiniband/hw/hfi1/chip.c
+++ b/drivers/infiniband/hw/hfi1/chip.c
@@ -6379,18 +6379,17 @@ static void lcb_shutdown(struct hfi1_dev
  *
  * The expectation is that the caller of this routine would have taken
  * care of properly transitioning the link into the correct state.
+ * NOTE: the caller needs to acquire the dd->dc8051_lock lock
+ *       before calling this function.
  */
-static void dc_shutdown(struct hfi1_devdata *dd)
+static void _dc_shutdown(struct hfi1_devdata *dd)
 {
-	unsigned long flags;
+	lockdep_assert_held(&dd->dc8051_lock);
 
-	spin_lock_irqsave(&dd->dc8051_lock, flags);
-	if (dd->dc_shutdown) {
-		spin_unlock_irqrestore(&dd->dc8051_lock, flags);
+	if (dd->dc_shutdown)
 		return;
-	}
+
 	dd->dc_shutdown = 1;
-	spin_unlock_irqrestore(&dd->dc8051_lock, flags);
 	/* Shutdown the LCB */
 	lcb_shutdown(dd, 1);
 	/*
@@ -6401,35 +6400,45 @@ static void dc_shutdown(struct hfi1_devd
 	write_csr(dd, DC_DC8051_CFG_RST, 0x1);
 }
 
+static void dc_shutdown(struct hfi1_devdata *dd)
+{
+	mutex_lock(&dd->dc8051_lock);
+	_dc_shutdown(dd);
+	mutex_unlock(&dd->dc8051_lock);
+}
+
 /*
  * Calling this after the DC has been brought out of reset should not
  * do any damage.
+ * NOTE: the caller needs to acquire the dd->dc8051_lock lock
+ *       before calling this function.
  */
-static void dc_start(struct hfi1_devdata *dd)
+static void _dc_start(struct hfi1_devdata *dd)
 {
-	unsigned long flags;
-	int ret;
+	lockdep_assert_held(&dd->dc8051_lock);
 
-	spin_lock_irqsave(&dd->dc8051_lock, flags);
 	if (!dd->dc_shutdown)
-		goto done;
-	spin_unlock_irqrestore(&dd->dc8051_lock, flags);
+		return;
+
 	/* Take the 8051 out of reset */
 	write_csr(dd, DC_DC8051_CFG_RST, 0ull);
 	/* Wait until 8051 is ready */
-	ret = wait_fm_ready(dd, TIMEOUT_8051_START);
-	if (ret) {
+	if (wait_fm_ready(dd, TIMEOUT_8051_START))
 		dd_dev_err(dd, "%s: timeout starting 8051 firmware\n",
 			   __func__);
-	}
+
 	/* Take away reset for LCB and RX FPE (set in lcb_shutdown). */
 	write_csr(dd, DCC_CFG_RESET, 0x10);
 	/* lcb_shutdown() with abort=1 does not restore these */
 	write_csr(dd, DC_LCB_ERR_EN, dd->lcb_err_en);
-	spin_lock_irqsave(&dd->dc8051_lock, flags);
 	dd->dc_shutdown = 0;
-done:
-	spin_unlock_irqrestore(&dd->dc8051_lock, flags);
+}
+
+static void dc_start(struct hfi1_devdata *dd)
+{
+	mutex_lock(&dd->dc8051_lock);
+	_dc_start(dd);
+	mutex_unlock(&dd->dc8051_lock);
 }
 
 /*
@@ -8418,16 +8427,11 @@ static int do_8051_command(
 {
 	u64 reg, completed;
 	int return_code;
-	unsigned long flags;
 	unsigned long timeout;
 
 	hfi1_cdbg(DC8051, "type %d, data 0x%012llx", type, in_data);
 
-	/*
-	 * Alternative to holding the lock for a long time:
-	 * - keep busy wait - have other users bounce off
-	 */
-	spin_lock_irqsave(&dd->dc8051_lock, flags);
+	mutex_lock(&dd->dc8051_lock);
 
 	/* We can't send any commands to the 8051 if it's in reset */
 	if (dd->dc_shutdown) {
@@ -8453,10 +8457,8 @@ static int do_8051_command(
 			return_code = -ENXIO;
 			goto fail;
 		}
-		spin_unlock_irqrestore(&dd->dc8051_lock, flags);
-		dc_shutdown(dd);
-		dc_start(dd);
-		spin_lock_irqsave(&dd->dc8051_lock, flags);
+		_dc_shutdown(dd);
+		_dc_start(dd);
 	}
 
 	/*
@@ -8534,8 +8536,7 @@ static int do_8051_command(
 	write_csr(dd, DC_DC8051_CFG_HOST_CMD_0, 0);
 
 fail:
-	spin_unlock_irqrestore(&dd->dc8051_lock, flags);
-
+	mutex_unlock(&dd->dc8051_lock);
 	return return_code;
 }
 
@@ -11849,6 +11850,10 @@ static void free_cntrs(struct hfi1_devda
 	dd->scntrs = NULL;
 	kfree(dd->cntrnames);
 	dd->cntrnames = NULL;
+	if (dd->update_cntr_wq) {
+		destroy_workqueue(dd->update_cntr_wq);
+		dd->update_cntr_wq = NULL;
+	}
 }
 
 static u64 read_dev_port_cntr(struct hfi1_devdata *dd, struct cntr_entry *entry,
@@ -12004,7 +12009,7 @@ u64 write_port_cntr(struct hfi1_pportdat
 	return write_dev_port_cntr(ppd->dd, entry, sval, ppd, vl, data);
 }
 
-static void update_synth_timer(unsigned long opaque)
+static void do_update_synth_timer(struct work_struct *work)
 {
 	u64 cur_tx;
 	u64 cur_rx;
@@ -12013,8 +12018,8 @@ static void update_synth_timer(unsigned
 	int i, j, vl;
 	struct hfi1_pportdata *ppd;
 	struct cntr_entry *entry;
-
-	struct hfi1_devdata *dd = (struct hfi1_devdata *)opaque;
+	struct hfi1_devdata *dd = container_of(work, struct hfi1_devdata,
+					       update_cntr_work);
 
 	/*
 	 * Rather than keep beating on the CSRs pick a minimal set that we can
@@ -12097,7 +12102,13 @@ static void update_synth_timer(unsigned
 	} else {
 		hfi1_cdbg(CNTR, "[%d] No update necessary", dd->unit);
 	}
+}
+
+static void update_synth_timer(unsigned long opaque)
+{
+	struct hfi1_devdata *dd = (struct hfi1_devdata *)opaque;
 
+	queue_work(dd->update_cntr_wq, &dd->update_cntr_work);
 	mod_timer(&dd->synth_stats_timer, jiffies + HZ * SYNTH_CNT_TIME);
 }
 
@@ -12333,6 +12344,13 @@ static int init_cntrs(struct hfi1_devdat
 	if (init_cpu_counters(dd))
 		goto bail;
 
+	dd->update_cntr_wq = alloc_ordered_workqueue("hfi1_update_cntr_%d",
+						     WQ_MEM_RECLAIM, dd->unit);
+	if (!dd->update_cntr_wq)
+		goto bail;
+
+	INIT_WORK(&dd->update_cntr_work, do_update_synth_timer);
+
 	mod_timer(&dd->synth_stats_timer, jiffies + HZ * SYNTH_CNT_TIME);
 	return 0;
 bail:
--- a/drivers/infiniband/hw/hfi1/hfi.h
+++ b/drivers/infiniband/hw/hfi1/hfi.h
@@ -475,7 +475,7 @@ struct rvt_sge_state;
 #define HFI1_PART_ENFORCE_OUT	0x2
 
 /* how often we check for synthetic counter wrap around */
-#define SYNTH_CNT_TIME 2
+#define SYNTH_CNT_TIME 3
 
 /* Counter flags */
 #define CNTR_NORMAL		0x0 /* Normal counters, just read register */
@@ -929,8 +929,9 @@ struct hfi1_devdata {
 	spinlock_t rcvctrl_lock; /* protect changes to RcvCtrl */
 	/* around rcd and (user ctxts) ctxt_cnt use (intr vs free) */
 	spinlock_t uctxt_lock; /* rcd and user context changes */
-	/* exclusive access to 8051 */
-	spinlock_t dc8051_lock;
+	struct mutex dc8051_lock; /* exclusive access to 8051 */
+	struct workqueue_struct *update_cntr_wq;
+	struct work_struct update_cntr_work;
 	/* exclusive access to 8051 memory */
 	spinlock_t dc8051_memlock;
 	int dc8051_timed_out;	/* remember if the 8051 timed out */
--- a/drivers/infiniband/hw/hfi1/init.c
+++ b/drivers/infiniband/hw/hfi1/init.c
@@ -1078,11 +1078,11 @@ struct hfi1_devdata *hfi1_alloc_devdata(
 	spin_lock_init(&dd->uctxt_lock);
 	spin_lock_init(&dd->hfi1_diag_trans_lock);
 	spin_lock_init(&dd->sc_init_lock);
-	spin_lock_init(&dd->dc8051_lock);
 	spin_lock_init(&dd->dc8051_memlock);
 	seqlock_init(&dd->sc2vl_lock);
 	spin_lock_init(&dd->sde_map_lock);
 	spin_lock_init(&dd->pio_map_lock);
+	mutex_init(&dd->dc8051_lock);
 	init_waitqueue_head(&dd->event_queue);
 
 	dd->int_counter = alloc_percpu(u64);

[PATCH 4.9 097/177] platform/x86: asus-wmi: try to set als by default

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oleksij Rempel <linux@rempel-privat.de>


[ Upstream commit e9b615186805e2c18a0ac76aca62c1543ecfdbb8 ]

some laptops, for example ASUS UX330UAK, have brocken als_get function
but working als_set funktion. In this case, ALS will stay turned off.

             Method (WMNB, 3, Serialized)
            {
	    ...
               If (Local0 == 0x53545344)
                {
		...
                    If (IIA0 == 0x00050001)
                    {
                        If (!ALSP)
                        {
                            Return (0x02)
                        }

                        Local0 = (GALS & 0x10)    <<<---- bug,
                                                    should be: (GALS () & 0x10)
                        If (Local0)
                        {
                            Return (0x00050001)
                        }
                        Else
                        {
                            Return (0x00050000)
                        }
                    }

             .....
                If (Local0 == 0x53564544)
                {
		...
                    If (IIA0 == 0x00050001)
                    {
                        Return (ALSC (IIA1))
                    }

                  ......
                    Method (GALS, 0, NotSerialized)
                    {
                        Local0 = Zero
                        Local0 |= 0x20
                        If (ALAE)
                        {
                            Local0 |= 0x10
                        }

                        Local1 = 0x0A
                        Local1 <<= 0x08
                        Local0 |= Local1
                        Return (Local0)
                    }

Since it works without problems on Windows I assume ASUS WMI driver for Win
never trying to get ALS state, and instead it is setting it by default to ON.

This patch will do the same. Turn ALS on by default.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/x86/asus-nb-wmi.c |   13 +++++++++++++
 drivers/platform/x86/asus-wmi.c    |   12 ++++++++++++
 drivers/platform/x86/asus-wmi.h    |    1 +
 3 files changed, 26 insertions(+)

--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -120,6 +120,10 @@ static struct quirk_entry quirk_asus_x55
 	.xusb2pr = 0x01D9,
 };
 
+static struct quirk_entry quirk_asus_ux330uak = {
+	.wmi_force_als_set = true,
+};
+
 static int dmi_matched(const struct dmi_system_id *dmi)
 {
 	quirks = dmi->driver_data;
@@ -422,6 +426,15 @@ static const struct dmi_system_id asus_q
 	},
 	{
 		.callback = dmi_matched,
+		.ident = "ASUSTeK COMPUTER INC. UX330UAK",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "UX330UAK"),
+		},
+		.driver_data = &quirk_asus_ux330uak,
+	},
+	{
+		.callback = dmi_matched,
 		.ident = "ASUSTeK COMPUTER INC. X550LB",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -1109,6 +1109,15 @@ static void asus_wmi_set_xusb2pr(struct
 }
 
 /*
+ * Some devices dont support or have borcken get_als method
+ * but still support set method.
+ */
+static void asus_wmi_set_als(void)
+{
+	asus_wmi_set_devstate(ASUS_WMI_DEVID_ALS_ENABLE, 1, NULL);
+}
+
+/*
  * Hwmon device
  */
 static int asus_hwmon_agfn_fan_speed_read(struct asus_wmi *asus, int fan,
@@ -2120,6 +2129,9 @@ static int asus_wmi_add(struct platform_
 			goto fail_rfkill;
 	}
 
+	if (asus->driver->quirks->wmi_force_als_set)
+		asus_wmi_set_als();
+
 	/* Some Asus desktop boards export an acpi-video backlight interface,
 	   stop this from showing up */
 	chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
--- a/drivers/platform/x86/asus-wmi.h
+++ b/drivers/platform/x86/asus-wmi.h
@@ -45,6 +45,7 @@ struct quirk_entry {
 	bool store_backlight_power;
 	bool wmi_backlight_power;
 	bool wmi_backlight_native;
+	bool wmi_force_als_set;
 	int wapf;
 	/*
 	 * For machines with AMD graphic chips, it will send out WMI event

[PATCH 4.9 098/177] ipmi/watchdog: fix wdog hang on panic waiting for ipmi response

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robert Lippert <roblip@gmail.com>


[ Upstream commit 2c1175c2e8e5487233cabde358a19577562ac83e ]

Commit c49c097610fe ("ipmi: Don't call receive handler in the
panic context") means that the panic_recv_free is not called during a
panic and the atomic count does not drop to 0.

Fix this by only expecting one decrement of the atomic variable
which comes from panic_smi_free.

Signed-off-by: Robert Lippert <rlippert@google.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/ipmi/ipmi_watchdog.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/char/ipmi/ipmi_watchdog.c
+++ b/drivers/char/ipmi/ipmi_watchdog.c
@@ -515,7 +515,7 @@ static void panic_halt_ipmi_heartbeat(vo
 	msg.cmd = IPMI_WDOG_RESET_TIMER;
 	msg.data = NULL;
 	msg.data_len = 0;
-	atomic_add(2, &panic_done_count);
+	atomic_add(1, &panic_done_count);
 	rv = ipmi_request_supply_msgs(watchdog_user,
 				      (struct ipmi_addr *) &addr,
 				      0,
@@ -525,7 +525,7 @@ static void panic_halt_ipmi_heartbeat(vo
 				      &panic_halt_heartbeat_recv_msg,
 				      1);
 	if (rv)
-		atomic_sub(2, &panic_done_count);
+		atomic_sub(1, &panic_done_count);
 }
 
 static struct ipmi_smi_msg panic_halt_smi_msg = {
@@ -549,12 +549,12 @@ static void panic_halt_ipmi_set_timeout(
 	/* Wait for the messages to be free. */
 	while (atomic_read(&panic_done_count) != 0)
 		ipmi_poll_interface(watchdog_user);
-	atomic_add(2, &panic_done_count);
+	atomic_add(1, &panic_done_count);
 	rv = i_ipmi_set_timeout(&panic_halt_smi_msg,
 				&panic_halt_recv_msg,
 				&send_heartbeat_now);
 	if (rv) {
-		atomic_sub(2, &panic_done_count);
+		atomic_sub(1, &panic_done_count);
 		printk(KERN_WARNING PFX
 		       "Unable to extend the watchdog timeout.");
 	} else {

[PATCH 4.9 099/177] ACPI / PMIC: xpower: Fix power_table addresses

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>


[ Upstream commit 2bde7c32b1db162692f05c6be066b5bcd3d9fdbe ]

The power table addresses should be contiguous, but there was a hole
where 0x34 was missing. On most devices this is not a problem as
addresses above 0x34 are used for the BUC# convertors which are not
used in the DSDTs I've access to but after the BUC# convertors
there is a field named GPI1 in the DSTDs, which does get used in some
cases and ended up turning BUC6 on and off due to the wrong addresses,
resulting in turning the entire device off (or causing it to reboot).

Removing the hole in the addresses fixes this, fixing one of my
Bay Trail tablets turning off while booting the mainline kernel.

While at it add comments with the field names used in the DSDTs to
make it easier to compare the register and bits used at each address
with the datasheet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/pmic/intel_pmic_xpower.c |   50 +++++++++++++++++-----------------
 1 file changed, 25 insertions(+), 25 deletions(-)

--- a/drivers/acpi/pmic/intel_pmic_xpower.c
+++ b/drivers/acpi/pmic/intel_pmic_xpower.c
@@ -28,97 +28,97 @@ static struct pmic_table power_table[] =
 		.address = 0x00,
 		.reg = 0x13,
 		.bit = 0x05,
-	},
+	}, /* ALD1 */
 	{
 		.address = 0x04,
 		.reg = 0x13,
 		.bit = 0x06,
-	},
+	}, /* ALD2 */
 	{
 		.address = 0x08,
 		.reg = 0x13,
 		.bit = 0x07,
-	},
+	}, /* ALD3 */
 	{
 		.address = 0x0c,
 		.reg = 0x12,
 		.bit = 0x03,
-	},
+	}, /* DLD1 */
 	{
 		.address = 0x10,
 		.reg = 0x12,
 		.bit = 0x04,
-	},
+	}, /* DLD2 */
 	{
 		.address = 0x14,
 		.reg = 0x12,
 		.bit = 0x05,
-	},
+	}, /* DLD3 */
 	{
 		.address = 0x18,
 		.reg = 0x12,
 		.bit = 0x06,
-	},
+	}, /* DLD4 */
 	{
 		.address = 0x1c,
 		.reg = 0x12,
 		.bit = 0x00,
-	},
+	}, /* ELD1 */
 	{
 		.address = 0x20,
 		.reg = 0x12,
 		.bit = 0x01,
-	},
+	}, /* ELD2 */
 	{
 		.address = 0x24,
 		.reg = 0x12,
 		.bit = 0x02,
-	},
+	}, /* ELD3 */
 	{
 		.address = 0x28,
 		.reg = 0x13,
 		.bit = 0x02,
-	},
+	}, /* FLD1 */
 	{
 		.address = 0x2c,
 		.reg = 0x13,
 		.bit = 0x03,
-	},
+	}, /* FLD2 */
 	{
 		.address = 0x30,
 		.reg = 0x13,
 		.bit = 0x04,
-	},
+	}, /* FLD3 */
 	{
-		.address = 0x38,
+		.address = 0x34,
 		.reg = 0x10,
 		.bit = 0x03,
-	},
+	}, /* BUC1 */
 	{
-		.address = 0x3c,
+		.address = 0x38,
 		.reg = 0x10,
 		.bit = 0x06,
-	},
+	}, /* BUC2 */
 	{
-		.address = 0x40,
+		.address = 0x3c,
 		.reg = 0x10,
 		.bit = 0x05,
-	},
+	}, /* BUC3 */
 	{
-		.address = 0x44,
+		.address = 0x40,
 		.reg = 0x10,
 		.bit = 0x04,
-	},
+	}, /* BUC4 */
 	{
-		.address = 0x48,
+		.address = 0x44,
 		.reg = 0x10,
 		.bit = 0x01,
-	},
+	}, /* BUC5 */
 	{
-		.address = 0x4c,
+		.address = 0x48,
 		.reg = 0x10,
 		.bit = 0x00
-	},
+	}, /* BUC6 */
 };
 
 /* TMP0 - TMP5 are the same, all from GPADC */

[PATCH 4.9 100/177] drm/amdgpu: fix gpu reset crash

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chunming Zhou <David1.Zhou@amd.com>


[ Upstream commit 51687759be93fbc553f2727e86be25c38126ba93 ]

[  413.687439] BUG: unable to handle kernel NULL pointer dereference at 0000000000000548
[  413.687479] IP: [<ffffffff8109b175>] to_live_kthread+0x5/0x60
[  413.687507] PGD 1efd12067
[  413.687519] PUD 1efd11067
[  413.687531] PMD 0

[  413.687543] Oops: 0000 [#1] SMP
[  413.687557] Modules linked in: amdgpu(OE) ttm(OE) drm_kms_helper(E) drm(E) i2c_algo_bit(E) fb_sys_fops(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) rpcsec_gss_krb5(E) nfsv4(E) nfs(E) fscache(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) eeepc_wmi(E) snd_hda_codec(E) asus_wmi(E) snd_hda_core(E) sparse_keymap(E) snd_hwdep(E) video(E) snd_pcm(E) snd_seq_midi(E) joydev(E) snd_seq_midi_event(E) snd_rawmidi(E) snd_seq(E) snd_seq_device(E) snd_timer(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) snd(E) crc32_pclmul(E) ghash_clmulni_intel(E) soundcore(E) aesni_intel(E) aes_x86_64(E) lrw(E) gf128mul(E) glue_helper(E) ablk_helper(E) cryptd(E) shpchp(E) serio_raw(E) i2c_piix4(E) 8250_dw(E) i2c_designware_platform(E) i2c_designware_core(E) mac_hid(E) binfmt_misc(E)
[  413.687894]  parport_pc(E) ppdev(E) lp(E) parport(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) autofs4(E) hid_generic(E) usbhid(E) hid(E) psmouse(E) ahci(E) r8169(E) mii(E) libahci(E) wmi(E)
[  413.687989] CPU: 13 PID: 1134 Comm: kworker/13:2 Tainted: G           OE   4.9.0-custom #4
[  413.688019] Hardware name: System manufacturer System Product Name/PRIME B350-PLUS, BIOS 0606 04/06/2017
[  413.688089] Workqueue: events amd_sched_job_timedout [amdgpu]
[  413.688116] task: ffff88020f9657c0 task.stack: ffffc90001a88000
[  413.688139] RIP: 0010:[<ffffffff8109b175>]  [<ffffffff8109b175>] to_live_kthread+0x5/0x60
[  413.688171] RSP: 0018:ffffc90001a8bd60  EFLAGS: 00010282
[  413.688191] RAX: ffff88020f0073f8 RBX: ffff88020f000000 RCX: 0000000000000000
[  413.688217] RDX: 0000000000000001 RSI: ffff88020f9670c0 RDI: 0000000000000000
[  413.688243] RBP: ffffc90001a8bd78 R08: 0000000000000000 R09: 0000000000001000
[  413.688269] R10: 0000006051b11a82 R11: 0000000000000001 R12: 0000000000000000
[  413.688295] R13: ffff88020f002770 R14: ffff88020f004838 R15: ffff8801b23c2c60
[  413.688321] FS:  0000000000000000(0000) GS:ffff88021ef40000(0000) knlGS:0000000000000000
[  413.688352] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  413.688373] CR2: 0000000000000548 CR3: 00000001efd0f000 CR4: 00000000003406e0
[  413.688399] Stack:
[  413.688407]  ffffffff8109b304 ffff88020f000000 0000000000000070 ffffc90001a8bdf0
[  413.688439]  ffffffffa05ce29d ffffffffa052feb7 ffffffffa07b5820 ffffc90001a8bda0
[  413.688470]  ffffffff00000018 ffff8801bb88f060 0000000001a8bdb8 ffff88021ef59280
[  413.688502] Call Trace:
[  413.688514]  [<ffffffff8109b304>] ? kthread_park+0x14/0x60
[  413.688555]  [<ffffffffa05ce29d>] amdgpu_gpu_reset+0x7d/0x670 [amdgpu]
[  413.688589]  [<ffffffffa052feb7>] ? drm_printk+0x97/0xa0 [drm]
[  413.688643]  [<ffffffffa0698136>] amdgpu_job_timedout+0x46/0x50 [amdgpu]
[  413.688700]  [<ffffffffa06969e7>] amd_sched_job_timedout+0x17/0x20 [amdgpu]
[  413.688727]  [<ffffffff81095493>] process_one_work+0x153/0x3f0
[  413.688751]  [<ffffffff81095c5b>] worker_thread+0x12b/0x4b0
[  413.688773]  [<ffffffff8100392e>] ? do_syscall_64+0x6e/0x180
[  413.688795]  [<ffffffff81095b30>] ? rescuer_thread+0x350/0x350
[  413.688818]  [<ffffffff8100392e>] ? do_syscall_64+0x6e/0x180
[  413.688839]  [<ffffffff8109b423>] kthread+0xd3/0xf0
[  413.688858]  [<ffffffff8109b350>] ? kthread_park+0x60/0x60
[  413.688881]  [<ffffffff817e1ee5>] ret_from_fork+0x25/0x30
[  413.688901] Code: 25 40 d3 00 00 48 8b 80 48 05 00 00 48 89 e5 5d 48 8b 40 c8 48 c1 e8 02 83 e0 01 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <48> 8b b7 48 05 00 00 55 48 89 e5 48 85 f6 74 31 8b 97 f8 18 00
[  413.689045] RIP  [<ffffffff8109b175>] to_live_kthread+0x5/0x60
[  413.689064]  RSP <ffffc90001a8bd60>
[  413.689076] CR2: 0000000000000548
[  413.697985] ---[ end trace 0a314a64821f84e9 ]---

The root cause is some ring doesn't have scheduler, like KIQ ring

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -2237,7 +2237,7 @@ int amdgpu_gpu_reset(struct amdgpu_devic
 	for (i = 0; i < AMDGPU_MAX_RINGS; ++i) {
 		struct amdgpu_ring *ring = adev->rings[i];
 
-		if (!ring)
+		if (!ring || !ring->sched.thread)
 			continue;
 		kthread_park(ring->sched.thread);
 		amd_sched_hw_job_reset(&ring->sched);
@@ -2326,7 +2326,8 @@ retry:
 		}
 		for (i = 0; i < AMDGPU_MAX_RINGS; ++i) {
 			struct amdgpu_ring *ring = adev->rings[i];
-			if (!ring)
+
+			if (!ring || !ring->sched.thread)
 				continue;
 
 			amd_sched_job_recovery(&ring->sched);
@@ -2335,7 +2336,7 @@ retry:
 	} else {
 		dev_err(adev->dev, "asic resume failed (%d).\n", r);
 		for (i = 0; i < AMDGPU_MAX_RINGS; ++i) {
-			if (adev->rings[i]) {
+			if (adev->rings[i] && adev->rings[i]->sched.thread) {
 				kthread_unpark(adev->rings[i]->sched.thread);
 			}
 		}

[PATCH 4.9 101/177] drm/nouveau/kms: Increase max retries in scanout position queries.

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mario Kleiner <mario.kleiner.de@gmail.com>


[ Upstream commit 60b95d709525e3ce1c51e1fc93175dcd1755d345 ]

So far we only allowed for 1 retry and just failed the query
- and thereby high precision vblank timestamping - if we did
not get a reasonable result, as such a failure wasn't considered
all too horrible. There are a few NVidia gpu models out there which
may need a bit more than 1 retry to get a successful query result
under some conditions.

Since Linux 4.4 the update code for vblank counter and timestamp
in drm_update_vblank_count() changed so that the implementation
assumes that high precision vblank timestamping of a kms driver
either consistently succeeds or consistently fails for a given
video mode and encoder/connector combo. Iow. switching from success
to fail or vice versa on a modeset or connector change is ok, but
spurious temporary failure for a given setup can confuse the core
code and potentially cause bad miscounting of vblanks and confusion
or hangs in userspace clients which rely on vblank  stuff, e.g.,
desktop compositors.

Therefore change the max retry count to a larger number - more than
any gpu so far is known to need to succeed, but still low enough
so that these queries which do also happen in vblank interrupt are
still fast enough to be not disastrously long if something would
go badly wrong with them.

As such sporadic retries only happen seldom even on affected gpu's,
this could mean a vblank irq could take a few dozen microseconds
longer every few hours of uptime -- better than a desktop compositor
randomly hanging every couple of hours or days of uptime in a hard
to reproduce manner.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/nouveau/nouveau_display.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/nouveau_display.c
+++ b/drivers/gpu/drm/nouveau/nouveau_display.c
@@ -106,7 +106,7 @@ nouveau_display_scanoutpos_head(struct d
 	};
 	struct nouveau_display *disp = nouveau_display(crtc->dev);
 	struct drm_vblank_crtc *vblank = &crtc->dev->vblank[drm_crtc_index(crtc)];
-	int ret, retry = 1;
+	int ret, retry = 20;
 
 	do {
 		ret = nvif_mthd(&disp->disp, 0, &args, sizeof(args));

[PATCH 4.9 102/177] jbd2: Fix lockdep splat with generic/270 test

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>


[ Upstream commit c52c47e4b4fbe4284602fc2ccbfc4a4d8dc05b49 ]

I've hit a lockdep splat with generic/270 test complaining that:

3216.fsstress.b/3533 is trying to acquire lock:
 (jbd2_handle){++++..}, at: [<ffffffff813152e0>] jbd2_log_wait_commit+0x0/0x150

but task is already holding lock:
 (jbd2_handle){++++..}, at: [<ffffffff8130bd3b>] start_this_handle+0x35b/0x850

The underlying problem is that jbd2_journal_force_commit_nested()
(called from ext4_should_retry_alloc()) may get called while a
transaction handle is started. In such case it takes care to not wait
for commit of the running transaction (which would deadlock) but only
for a commit of a transaction that is already committing (which is safe
as that doesn't wait for any filesystem locks).

In fact there are also other callers of jbd2_log_wait_commit() that take
care to pass tid of a transaction that is already committing and for
those cases, the lockdep instrumentation is too restrictive and leading
to false positive reports. Fix the problem by calling
jbd2_might_wait_for_commit() from jbd2_log_wait_commit() only if the
transaction isn't already committing.

Fixes: 1eaa566d368b214d99cbb973647c1b0b8102a9ae
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/jbd2/journal.c |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -691,8 +691,21 @@ int jbd2_log_wait_commit(journal_t *jour
 {
 	int err = 0;
 
-	jbd2_might_wait_for_commit(journal);
 	read_lock(&journal->j_state_lock);
+#ifdef CONFIG_PROVE_LOCKING
+	/*
+	 * Some callers make sure transaction is already committing and in that
+	 * case we cannot block on open handles anymore. So don't warn in that
+	 * case.
+	 */
+	if (tid_gt(tid, journal->j_commit_sequence) &&
+	    (!journal->j_committing_transaction ||
+	     journal->j_committing_transaction->t_tid != tid)) {
+		read_unlock(&journal->j_state_lock);
+		jbd2_might_wait_for_commit(journal);
+		read_lock(&journal->j_state_lock);
+	}
+#endif
 #ifdef CONFIG_JBD2_DEBUG
 	if (!tid_geq(journal->j_commit_request, tid)) {
 		printk(KERN_ERR

[PATCH 4.9 103/177] ixgbevf: fix size of queue stats length

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emil Tantilov <emil.s.tantilov@intel.com>


[ Upstream commit f87fc44770f54ff1b54d44ae9cec11f10efeca02 ]

IXGBEVF_QUEUE_STATS_LEN is based on ixgebvf_stats, not ixgbe_stats.

This change fixes a bug where ethtool -S displayed some empty fields.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/ixgbevf/ethtool.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/intel/ixgbevf/ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ethtool.c
@@ -80,7 +80,7 @@ static struct ixgbe_stats ixgbevf_gstrin
 #define IXGBEVF_QUEUE_STATS_LEN ( \
 	(((struct ixgbevf_adapter *)netdev_priv(netdev))->num_tx_queues + \
 	 ((struct ixgbevf_adapter *)netdev_priv(netdev))->num_rx_queues) * \
-	 (sizeof(struct ixgbe_stats) / sizeof(u64)))
+	 (sizeof(struct ixgbevf_stats) / sizeof(u64)))
 #define IXGBEVF_GLOBAL_STATS_LEN ARRAY_SIZE(ixgbevf_gstrings_stats)
 
 #define IXGBEVF_STATS_LEN (IXGBEVF_GLOBAL_STATS_LEN + IXGBEVF_QUEUE_STATS_LEN)

[PATCH 4.9 104/177] net: ethernet: ucc_geth: fix MEM_PART_MURAM mode

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe Leroy <christophe.leroy@c-s.fr>


[ Upstream commit 8b8642af15ed14b9a7a34d3401afbcc274533e13 ]

Since commit 5093bb965a163 ("powerpc/QE: switch to the cpm_muram
implementation"), muram area is not part of immrbar mapping anymore
so immrbar_virt_to_phys() is not usable anymore.

Fixes: 5093bb965a163 ("powerpc/QE: switch to the cpm_muram implementation")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Li Yang <pku.leo@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/ucc_geth.c |    8 +++-----
 include/soc/fsl/qe/qe.h                   |    1 +
 2 files changed, 4 insertions(+), 5 deletions(-)

--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -2594,11 +2594,10 @@ static int ucc_geth_startup(struct ucc_g
 		} else if (ugeth->ug_info->uf_info.bd_mem_part ==
 			   MEM_PART_MURAM) {
 			out_be32(&ugeth->p_send_q_mem_reg->sqqd[i].bd_ring_base,
-				 (u32) immrbar_virt_to_phys(ugeth->
-							    p_tx_bd_ring[i]));
+				 (u32)qe_muram_dma(ugeth->p_tx_bd_ring[i]));
 			out_be32(&ugeth->p_send_q_mem_reg->sqqd[i].
 				 last_bd_completed_address,
-				 (u32) immrbar_virt_to_phys(endOfRing));
+				 (u32)qe_muram_dma(endOfRing));
 		}
 	}
 
@@ -2844,8 +2843,7 @@ static int ucc_geth_startup(struct ucc_g
 		} else if (ugeth->ug_info->uf_info.bd_mem_part ==
 			   MEM_PART_MURAM) {
 			out_be32(&ugeth->p_rx_bd_qs_tbl[i].externalbdbaseptr,
-				 (u32) immrbar_virt_to_phys(ugeth->
-							    p_rx_bd_ring[i]));
+				 (u32)qe_muram_dma(ugeth->p_rx_bd_ring[i]));
 		}
 		/* rest of fields handled by QE */
 	}
--- a/include/soc/fsl/qe/qe.h
+++ b/include/soc/fsl/qe/qe.h
@@ -243,6 +243,7 @@ static inline int qe_alive_during_sleep(
 #define qe_muram_free cpm_muram_free
 #define qe_muram_addr cpm_muram_addr
 #define qe_muram_offset cpm_muram_offset
+#define qe_muram_dma cpm_muram_dma
 
 #define qe_setbits32(_addr, _v) iowrite32be(ioread32be(_addr) |  (_v), (_addr))
 #define qe_clrbits32(_addr, _v) iowrite32be(ioread32be(_addr) & ~(_v), (_addr))

[PATCH 4.9 105/177] soc/fsl/qe: round brg_freq to 1kHz granularity

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Valentin Longchamp <valentin.longchamp@keymile.com>


[ Upstream commit 2ccf80b7566cc035d903dd0ac5d7ebd25c2c1060 ]

Because of integer computation rounding in u-boot (that sets the QE
brg-frequency DTS prop), the clk value is 99999999 Hz even though it is
100 MHz.

When setting brg clks that are exact divisors of 100 MHz, this small
differnce plays a role and can result in lower clks to be output (for
instance 20 MHz - divide by 5 - results in 16.666 MHz - divide by 6).

This patch fixes that by "forcing" the brg_clk to the nearest kHz when
the difference is below 2 integer rounding errors (i.e. 4).

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/soc/fsl/qe/qe.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/drivers/soc/fsl/qe/qe.c
+++ b/drivers/soc/fsl/qe/qe.c
@@ -163,11 +163,15 @@ EXPORT_SYMBOL(qe_issue_cmd);
  */
 static unsigned int brg_clk = 0;
 
+#define CLK_GRAN	(1000)
+#define CLK_GRAN_LIMIT	(5)
+
 unsigned int qe_get_brg_clk(void)
 {
 	struct device_node *qe;
 	int size;
 	const u32 *prop;
+	unsigned int mod;
 
 	if (brg_clk)
 		return brg_clk;
@@ -185,6 +189,15 @@ unsigned int qe_get_brg_clk(void)
 
 	of_node_put(qe);
 
+	/* round this if near to a multiple of CLK_GRAN */
+	mod = brg_clk % CLK_GRAN;
+	if (mod) {
+		if (mod < CLK_GRAN_LIMIT)
+			brg_clk -= mod;
+		else if (mod > (CLK_GRAN - CLK_GRAN_LIMIT))
+			brg_clk += CLK_GRAN - mod;
+	}
+
 	return brg_clk;
 }
 EXPORT_SYMBOL(qe_get_brg_clk);

[PATCH 4.9 106/177] Bluetooth: hci_ldisc: Add protocol check to hci_uart_dequeue()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dean Jenkins <Dean_Jenkins@mentor.com>


[ Upstream commit 048e1bd3a27fbeb84ccdff52e165370c1339a193 ]

Before attempting to dequeue a Data Link protocol encapsulated message,
check that the Data Link protocol is still bound to the HCI UART driver.
This makes the code consistent with the usage of the other proto
function pointers.

Therefore, add a check for HCI_UART_PROTO_READY into hci_uart_dequeue()
and return NULL if the Data Link protocol is not bound.

This is needed for robustness as there is a scheduling race condition.
hci_uart_write_work() is scheduled to run via work queue hu->write_work
from hci_uart_tx_wakeup(). Therefore, there is a delay between
scheduling hci_uart_write_work() to run and hci_uart_dequeue() running
whereby the Data Link protocol layer could become unbound during the
scheduling delay. In this case, without the check, the call to the
unbound Data Link protocol layer dequeue function can crash.

It is noted that hci_uart_tty_close() has a
"cancel_work_sync(&hu->write_work)" statement but this only reduces
the window of the race condition because it is possible for a new
work-item to be added to work queue hu->write_work after the call to
cancel_work_sync(). For example, Data Link layer retransmissions can
be added to the work queue after the cancel_work_sync() has finished.

Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/hci_ldisc.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -113,10 +113,12 @@ static inline struct sk_buff *hci_uart_d
 {
 	struct sk_buff *skb = hu->tx_skb;
 
-	if (!skb)
-		skb = hu->proto->dequeue(hu);
-	else
+	if (!skb) {
+		if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
+			skb = hu->proto->dequeue(hu);
+	} else {
 		hu->tx_skb = NULL;
+	}
 
 	return skb;
 }

[PATCH 4.9 107/177] Bluetooth: hci_ldisc: Add protocol check to hci_uart_tx_wakeup()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dean Jenkins <Dean_Jenkins@mentor.com>


[ Upstream commit 2d6f1da168e1d62c47f7d50135ac4cbd8411dcb1 ]

Before attempting to schedule a work-item onto hu->write_work in
hci_uart_tx_wakeup(), check that the Data Link protocol layer is
still bound to the HCI UART driver.

Failure to perform this protocol check causes a race condition between
the work queue hu->write_work running hci_uart_write_work() and the
Data Link protocol layer being unbound (closed) in hci_uart_tty_close().

Note hci_uart_tty_close() does have a "cancel_work_sync(&hu->write_work)"
but it is ineffective because it cannot prevent work-items being added
to hu->write_work after cancel_work_sync() has run.

Therefore, add a check for HCI_UART_PROTO_READY into hci_uart_tx_wakeup()
which prevents scheduling of the work queue when HCI_UART_PROTO_READY
is in the clear state. However, note a small race condition remains
because the hci_uart_tx_wakeup() thread can run in parallel with the
hci_uart_tty_close() thread so it is possible that a schedule of
hu->write_work can occur when HCI_UART_PROTO_READY is cleared. A complete
solution needs locking of the threads which is implemented in a future
commit.

Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/hci_ldisc.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -125,6 +125,9 @@ static inline struct sk_buff *hci_uart_d
 
 int hci_uart_tx_wakeup(struct hci_uart *hu)
 {
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		return 0;
+
 	if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) {
 		set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
 		return 0;

[PATCH 4.9 108/177] vxlan: correctly handle ipv6.disable module parameter

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Benc <jbenc@redhat.com>


[ Upstream commit d074bf9600443403aa24fbc12c1f18eadc90f5aa ]

When IPv6 is compiled but disabled at runtime, __vxlan_sock_add returns
-EAFNOSUPPORT. For metadata based tunnels, this causes failure of the whole
operation of bringing up the tunnel.

Ignore failure of IPv6 socket creation for metadata based tunnels caused by
IPv6 not being available.

Fixes: b1be00a6c39f ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/vxlan.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -2816,17 +2816,21 @@ static int __vxlan_sock_add(struct vxlan
 
 static int vxlan_sock_add(struct vxlan_dev *vxlan)
 {
-	bool ipv6 = vxlan->flags & VXLAN_F_IPV6;
 	bool metadata = vxlan->flags & VXLAN_F_COLLECT_METADATA;
+	bool ipv6 = vxlan->flags & VXLAN_F_IPV6 || metadata;
+	bool ipv4 = !ipv6 || metadata;
 	int ret = 0;
 
 	RCU_INIT_POINTER(vxlan->vn4_sock, NULL);
 #if IS_ENABLED(CONFIG_IPV6)
 	RCU_INIT_POINTER(vxlan->vn6_sock, NULL);
-	if (ipv6 || metadata)
+	if (ipv6) {
 		ret = __vxlan_sock_add(vxlan, true);
+		if (ret < 0 && ret != -EAFNOSUPPORT)
+			ipv4 = false;
+	}
 #endif
-	if (!ret && (!ipv6 || metadata))
+	if (ipv4)
 		ret = __vxlan_sock_add(vxlan, false);
 	if (ret < 0)
 		vxlan_sock_release(vxlan);

[PATCH 4.9 109/177] qed: Unlock on error in qed_vf_pf_acquire()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>


[ Upstream commit 66117a9d9a8ca948680d6554769ef9e88f936954 ]

My static checker complains that we're holding a mutex on this error
path.  Let's goto exit instead of returning directly.

Fixes: b0bccb69eba3 ("qed: Change locking scheme for VF channel")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qed/qed_vf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/qlogic/qed/qed_vf.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_vf.c
@@ -204,7 +204,7 @@ static int qed_vf_pf_acquire(struct qed_
 		/* send acquire request */
 		rc = qed_send_msg2pf(p_hwfn, &resp->hdr.status, sizeof(*resp));
 		if (rc)
-			return rc;
+			goto exit;
 
 		/* copy acquire response from buffer to p_hwfn */
 		memcpy(&p_iov->acquire_resp, resp, sizeof(p_iov->acquire_resp));

[PATCH 4.9 110/177] bnx2x: Align RX buffers

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Scott Wood <swood@redhat.com>


[ Upstream commit 9b70de6d0266888b3743f03802502e43131043c8 ]

The bnx2x driver is not providing proper alignment on the receive buffers it
passes to build_skb(), causing skb_shared_info to be misaligned.
skb_shared_info contains an atomic, and while PPC normally supports
unaligned accesses, it does not support unaligned atomics.

Aligning the size of rx buffers will ensure that page_frag_alloc() returns
aligned addresses.

This can be reproduced on PPC by setting the network MTU to 1450 (or other
non-multiple-of-4) and then generating sufficient inbound network traffic
(one or two large "wget"s usually does it), producing the following oops:

Unable to handle kernel paging request for unaligned access at address 0xc00000ffc43af656
Faulting instruction address: 0xc00000000080ef8c
Oops: Kernel access of bad area, sig: 7 [#1]
SMP NR_CPUS=2048
NUMA
PowerNV
Modules linked in: vmx_crypto powernv_rng rng_core powernv_op_panel leds_powernv led_class nfsd ip_tables x_tables autofs4 xfs lpfc bnx2x mdio libcrc32c crc_t10dif crct10dif_generic crct10dif_common
CPU: 104 PID: 0 Comm: swapper/104 Not tainted 4.11.0-rc8-00088-g4c761da #2
task: c00000ffd4892400 task.stack: c00000ffd4920000
NIP: c00000000080ef8c LR: c00000000080eee8 CTR: c0000000001f8320
REGS: c00000ffffc33710 TRAP: 0600   Not tainted  (4.11.0-rc8-00088-g4c761da)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>
  CR: 24082042  XER: 00000000
CFAR: c00000000080eea0 DAR: c00000ffc43af656 DSISR: 00000000 SOFTE: 1
GPR00: c000000000907f64 c00000ffffc33990 c000000000dd3b00 c00000ffcaf22100
GPR04: c00000ffcaf22e00 0000000000000000 0000000000000000 0000000000000000
GPR08: 0000000000b80008 c00000ffc43af636 c00000ffc43af656 0000000000000000
GPR12: c0000000001f6f00 c00000000fe1a000 000000000000049f 000000000000c51f
GPR16: 00000000ffffef33 0000000000000000 0000000000008a43 0000000000000001
GPR20: c00000ffc58a90c0 0000000000000000 000000000000dd86 0000000000000000
GPR24: c000007fd0ed10c0 00000000ffffffff 0000000000000158 000000000000014a
GPR28: c00000ffc43af010 c00000ffc9144000 c00000ffcaf22e00 c00000ffcaf22100
NIP [c00000000080ef8c] __skb_clone+0xdc/0x140
LR [c00000000080eee8] __skb_clone+0x38/0x140
Call Trace:
[c00000ffffc33990] [c00000000080fb74] skb_clone+0x74/0x110 (unreliable)
[c00000ffffc339c0] [c000000000907f64] packet_rcv+0x144/0x510
[c00000ffffc33a40] [c000000000827b64] __netif_receive_skb_core+0x5b4/0xd80
[c00000ffffc33b00] [c00000000082b2bc] netif_receive_skb_internal+0x2c/0xc0
[c00000ffffc33b40] [c00000000082c49c] napi_gro_receive+0x11c/0x260
[c00000ffffc33b80] [d000000066483d68] bnx2x_poll+0xcf8/0x17b0 [bnx2x]
[c00000ffffc33d00] [c00000000082babc] net_rx_action+0x31c/0x480
[c00000ffffc33e10] [c0000000000d5a44] __do_softirq+0x164/0x3d0
[c00000ffffc33f00] [c0000000000d60a8] irq_exit+0x108/0x120
[c00000ffffc33f20] [c000000000015b98] __do_irq+0x98/0x200
[c00000ffffc33f90] [c000000000027f14] call_do_irq+0x14/0x24
[c00000ffd4923a90] [c000000000015d94] do_IRQ+0x94/0x110
[c00000ffd4923ae0] [c000000000008d90] hardware_interrupt_common+0x150/0x160

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2026,6 +2026,7 @@ static void bnx2x_set_rx_buf_size(struct
 				  ETH_OVREHEAD +
 				  mtu +
 				  BNX2X_FW_RX_ALIGN_END;
+		fp->rx_buf_size = SKB_DATA_ALIGN(fp->rx_buf_size);
 		/* Note : rx_buf_size doesn't take into account NET_SKB_PAD */
 		if (fp->rx_buf_size + NET_SKB_PAD <= PAGE_SIZE)
 			fp->rx_frag_size = fp->rx_buf_size + NET_SKB_PAD;

[PATCH 4.9 111/177] power: supply: bq24190_charger: Add disable-reset device-property

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>


[ Upstream commit 6cf62a3b97e78ba41d31390e59a1ddc98a9e3622 ]

Allow platform-code to disable the reset on probe and suspend/resume
by setting a "disable-reset" boolean device property on the device.

There are several reasons why the platform-code may want to disable
the reset on probe and suspend/resume:

1) Resetting the charger should never be necessary it should always have
sane values programmed. If it is running with invalid values while we
are not running (system turned off or suspended) there is a big problem
as that may lead to overcharging the battery.

2) The reset in suspend() is meant to put the charger back into default
mode, but this is not necessary and not a good idea. If the charger has
been programmed with a higher max charge_current / charge_voltage then
putting it back in default-mode will reset those to the safe power-on
defaults, leading to slower charging, or charging to a lower voltage
(and thus not using the full capacity) while suspended which is
undesirable. Reprogramming the max charge_current / charge_voltage
after the reset will not help here as that will put the charger back
in host mode and start the i2c watchdog if the host then does not do
anything for 40s (iow if we're suspended for more then 40s) the watchdog
expires resetting the device to default-mode, including resetting all
the registers to there safe power-on defaults. So the only way to keep
using custom charge settings while suspending is to keep the charger in
its normal running state with the i2c watchdog disabled. This is fine
as the charger will still automatically switch from constant current
to constant voltage and stop charging when the battery is full.

3) Besides never being necessary resetting the charger also causes
problems on systems where the charge voltage limit is set higher then the
reset value, if this is the case and the charger is reset while charging
and the battery voltage is between the 2 voltages, then about half the
time the charger gets confused and claims to be charging (REG08 contains
0x64) but in reality the charger has decoupled itself from VBUS (Q1 off)
and is drawing 0A from VBUS, leaving the system running from the battery.

This last problem is happening on a GPD-win mini PC with a bq24292i
charger chip combined with a max17047 fuel-gauge and a LiHV battery.
I've checked and TI does not list any errata for the bq24292i which
could explain this (there are no errata at all).

Cc: Liam Breck <kernel@networkimprov.net>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/power/supply/bq24190_charger.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -506,6 +506,9 @@ static int bq24190_register_reset(struct
 	int ret, limit = 100;
 	u8 v;
 
+	if (device_property_read_bool(bdi->dev, "disable-reset"))
+		return 0;
+
 	/* Reset the registers */
 	ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
 			BQ24190_REG_POC_RESET_MASK,

[PATCH 4.9 112/177] power: supply: isp1704: Fix unchecked return value of devm_kzalloc

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pan Bian <bianpan2016@163.com>


[ Upstream commit 8b20839988f1ed5e534b270f3776709b640dc7e0 ]

Function devm_kzalloc() will return a NULL pointer. However, in function
isp1704_charger_probe(), the return value of devm_kzalloc() is directly
used without validation. This may result in a bad memory access bug.

Fixes: 34a109610e2a ("isp1704_charger: Add DT support")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/power/supply/isp1704_charger.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/power/supply/isp1704_charger.c
+++ b/drivers/power/supply/isp1704_charger.c
@@ -418,6 +418,10 @@ static int isp1704_charger_probe(struct
 
 		pdata = devm_kzalloc(&pdev->dev,
 			sizeof(struct isp1704_charger_data), GFP_KERNEL);
+		if (!pdata) {
+			ret = -ENOMEM;
+			goto fail0;
+		}
 		pdata->enable_gpio = gpio;
 
 		dev_info(&pdev->dev, "init gpio %d\n", pdata->enable_gpio);

[PATCH 4.9 113/177] power: supply: pda_power: move from timer to delayed_work

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Trimarchi <michael@amarulasolutions.com>


[ Upstream commit 633e8799ddc09431be2744c4a1efdbda13af2b0b ]

This changed is needed to avoid locking problem during
boot as shown:

<5>[    8.824096] Registering SWP/SWPB emulation handler
<6>[    8.977294] clock: disabling unused clocks to save power
<3>[    9.108154] BUG: sleeping function called from invalid context at kernel_albert/kernel/mutex.c:269
<3>[    9.122894] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
<4>[    9.130249] 3 locks held by swapper/0/1:
<4>[    9.134613]  #0:  (&__lockdep_no_validate__){......}, at: [<c0342430>] __driver_attach+0x58/0xa8
<4>[    9.144500]  #1:  (&__lockdep_no_validate__){......}, at: [<c0342440>] __driver_attach+0x68/0xa8
<4>[    9.154357]  #2:  (&polling_timer){......}, at: [<c0053770>] run_timer_softirq+0x108/0x3ec
<4>[    9.163726] Backtrace:
<4>[    9.166473] [<c001269c>] (dump_backtrace+0x0/0x114) from [<c067e5f0>] (dump_stack+0x20/0x24)
<4>[    9.175811]  r6:00203230 r5:0000010d r4:d782e000 r3:60000113
<4>[    9.182250] [<c067e5d0>] (dump_stack+0x0/0x24) from [<c007441c>] (__might_sleep+0x10c/0x128)
<4>[    9.191650] [<c0074310>] (__might_sleep+0x0/0x128) from [<c0688f60>] (mutex_lock_nested+0x34/0x36c)
<4>[    9.201660]  r5:c02d5350 r4:d79a0c64
<4>[    9.205688] [<c0688f2c>] (mutex_lock_nested+0x0/0x36c) from [<c02d5350>] (regulator_set_current_limit+0x30/0x118)
<4>[    9.217071] [<c02d5320>] (regulator_set_current_limit+0x0/0x118) from [<c0435ce0>] (update_charger+0x84/0xc4)
<4>[    9.228027]  r7:d782fb20 r6:00000101 r5:c1767e94 r4:00000000
<4>[    9.234436] [<c0435c5c>] (update_charger+0x0/0xc4) from [<c0435d40>] (psy_changed+0x20/0x48)
<4>[    9.243804]  r5:d782e000 r4:c1767e94
<4>[    9.247802] [<c0435d20>] (psy_changed+0x0/0x48) from [<c0435dec>] (polling_timer_func+0x84/0xb8)
<4>[    9.257537]  r4:c1767e94 r3:00000002
<4>[    9.261566] [<c0435d68>] (polling_timer_func+0x0/0xb8) from [<c00537e4>] (run_timer_softirq+0x17c/0x3ec)
<4>[    9.272033]  r4:c1767eb0 r3:00000000
<4>[    9.276062] [<c0053668>] (run_timer_softirq+0x0/0x3ec) from [<c004b000>] (__do_softirq+0xf0/0x298)
<4>[    9.286010] [<c004af10>] (__do_softirq+0x0/0x298) from [<c004b650>] (irq_exit+0x98/0xa0)
<4>[    9.295013] [<c004b5b8>] (irq_exit+0x0/0xa0) from [<c000edbc>] (handle_IRQ+0x60/0xc0)
<4>[    9.303680]  r4:c1194e98 r3:c00bc778
<4>[    9.307708] [<c000ed5c>] (handle_IRQ+0x0/0xc0) from [<c0008504>] (gic_handle_irq+0x34/0x68)
<4>[    9.316955]  r8:000ac383 r7:d782fc3c r6:d782fc08 r5:c11936c4 r4:e0802100
<4>[    9.324310] r3:c026ba48
<4>[    9.327301] [<c00084d0>] (gic_handle_irq+0x0/0x68) from [<c068c2c0>] (__irq_svc+0x40/0x74)
<4>[    9.336456] Exception stack(0xd782fc08 to 0xd782fc50)
<4>[    9.342041] fc00:                   d6e30e6c ac383627 00000000 ac383417 ea19c000 ea200000
<4>[    9.351104] fc20: beffffff 00000667 000ac383 d6e30670 d6e3066c d782fc94 d782fbe8 d782fc50
<4>[    9.360168] fc40: c026ba48 c001d1f0 00000113 ffffffff

Fixes: b2998049cfae ("[BATTERY] pda_power platform driver")
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/power/supply/pda_power.c |   49 +++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 22 deletions(-)

--- a/drivers/power/supply/pda_power.c
+++ b/drivers/power/supply/pda_power.c
@@ -30,9 +30,9 @@ static inline unsigned int get_irq_flags
 static struct device *dev;
 static struct pda_power_pdata *pdata;
 static struct resource *ac_irq, *usb_irq;
-static struct timer_list charger_timer;
-static struct timer_list supply_timer;
-static struct timer_list polling_timer;
+static struct delayed_work charger_work;
+static struct delayed_work polling_work;
+static struct delayed_work supply_work;
 static int polling;
 static struct power_supply *pda_psy_ac, *pda_psy_usb;
 
@@ -140,7 +140,7 @@ static void update_charger(void)
 	}
 }
 
-static void supply_timer_func(unsigned long unused)
+static void supply_work_func(struct work_struct *work)
 {
 	if (ac_status == PDA_PSY_TO_CHANGE) {
 		ac_status = new_ac_status;
@@ -161,11 +161,12 @@ static void psy_changed(void)
 	 * Okay, charger set. Now wait a bit before notifying supplicants,
 	 * charge power should stabilize.
 	 */
-	mod_timer(&supply_timer,
-		  jiffies + msecs_to_jiffies(pdata->wait_for_charger));
+	cancel_delayed_work(&supply_work);
+	schedule_delayed_work(&supply_work,
+			      msecs_to_jiffies(pdata->wait_for_charger));
 }
 
-static void charger_timer_func(unsigned long unused)
+static void charger_work_func(struct work_struct *work)
 {
 	update_status();
 	psy_changed();
@@ -184,13 +185,14 @@ static irqreturn_t power_changed_isr(int
 	 * Wait a bit before reading ac/usb line status and setting charger,
 	 * because ac/usb status readings may lag from irq.
 	 */
-	mod_timer(&charger_timer,
-		  jiffies + msecs_to_jiffies(pdata->wait_for_status));
+	cancel_delayed_work(&charger_work);
+	schedule_delayed_work(&charger_work,
+			      msecs_to_jiffies(pdata->wait_for_status));
 
 	return IRQ_HANDLED;
 }
 
-static void polling_timer_func(unsigned long unused)
+static void polling_work_func(struct work_struct *work)
 {
 	int changed = 0;
 
@@ -211,8 +213,9 @@ static void polling_timer_func(unsigned
 	if (changed)
 		psy_changed();
 
-	mod_timer(&polling_timer,
-		  jiffies + msecs_to_jiffies(pdata->polling_interval));
+	cancel_delayed_work(&polling_work);
+	schedule_delayed_work(&polling_work,
+			      msecs_to_jiffies(pdata->polling_interval));
 }
 
 #if IS_ENABLED(CONFIG_USB_PHY)
@@ -250,8 +253,9 @@ static int otg_handle_notification(struc
 	 * Wait a bit before reading ac/usb line status and setting charger,
 	 * because ac/usb status readings may lag from irq.
 	 */
-	mod_timer(&charger_timer,
-		  jiffies + msecs_to_jiffies(pdata->wait_for_status));
+	cancel_delayed_work(&charger_work);
+	schedule_delayed_work(&charger_work,
+			      msecs_to_jiffies(pdata->wait_for_status));
 
 	return NOTIFY_OK;
 }
@@ -300,8 +304,8 @@ static int pda_power_probe(struct platfo
 	if (!pdata->ac_max_uA)
 		pdata->ac_max_uA = 500000;
 
-	setup_timer(&charger_timer, charger_timer_func, 0);
-	setup_timer(&supply_timer, supply_timer_func, 0);
+	INIT_DELAYED_WORK(&charger_work, charger_work_func);
+	INIT_DELAYED_WORK(&supply_work, supply_work_func);
 
 	ac_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ac");
 	usb_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "usb");
@@ -385,9 +389,10 @@ static int pda_power_probe(struct platfo
 
 	if (polling) {
 		dev_dbg(dev, "will poll for status\n");
-		setup_timer(&polling_timer, polling_timer_func, 0);
-		mod_timer(&polling_timer,
-			  jiffies + msecs_to_jiffies(pdata->polling_interval));
+		INIT_DELAYED_WORK(&polling_work, polling_work_func);
+		cancel_delayed_work(&polling_work);
+		schedule_delayed_work(&polling_work,
+				      msecs_to_jiffies(pdata->polling_interval));
 	}
 
 	if (ac_irq || usb_irq)
@@ -433,9 +438,9 @@ static int pda_power_remove(struct platf
 		free_irq(ac_irq->start, pda_psy_ac);
 
 	if (polling)
-		del_timer_sync(&polling_timer);
-	del_timer_sync(&charger_timer);
-	del_timer_sync(&supply_timer);
+		cancel_delayed_work_sync(&polling_work);
+	cancel_delayed_work_sync(&charger_work);
+	cancel_delayed_work_sync(&supply_work);
 
 	if (pdata->is_usb_online)
 		power_supply_unregister(pda_psy_usb);

[PATCH 4.9 114/177] Input: twl4030-pwrbutton - use correct device for irq request

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Reichel <sebastian.reichel@collabora.co.uk>


[ Upstream commit 3071e9dd6cd3f2290d770117330f2c8b2e9a97e4 ]

The interrupt should be requested for the platform device
and not for the input device.

Fixes: 7f9ce649d267 ("Input: twl4030-pwrbutton - simplify driver using devm_*")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/misc/twl4030-pwrbutton.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -70,7 +70,7 @@ static int twl4030_pwrbutton_probe(struc
 	pwr->phys = "twl4030_pwrbutton/input0";
 	pwr->dev.parent = &pdev->dev;
 
-	err = devm_request_threaded_irq(&pwr->dev, irq, NULL, powerbutton_irq,
+	err = devm_request_threaded_irq(&pdev->dev, irq, NULL, powerbutton_irq,
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
 			IRQF_ONESHOT,
 			"twl4030_pwrbutton", pwr);

[PATCH 4.9 115/177] IB/rxe: Dont clamp residual length to mtu

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Thumshirn <jthumshirn@suse.de>


[ Upstream commit d52418502e288b5c7e9e2e6cf1de5f1d3d79d2e1 ]

When reading a RDMA WRITE FIRST packet we copy the DMA length from the RDMA
header into the qp->resp.resid variable for later use. Later in check_rkey()
we clamp it to the MTU if the packet is an  RDMA WRITE packet and has a
residual length bigger than the MTU. Later in write_data_in() we subtract the
payload of the packet from the residual length. If the packet happens to have a
payload of exactly the MTU size we end up with a residual length of 0 despite
the packet not being the last in the conversation. When the next packet in the
conversation arrives, we don't have any residual length left and thus set the QP
into an error state.

This broke NVMe over Fabrics functionality over rdma_rxe.ko

The patch was verified using the following test.

 # echo eth0 > /sys/module/rdma_rxe/parameters/add
 # nvme connect -t rdma -a 192.168.155.101 -s 1023 -n nvmf-test
 # mkfs.xfs -fK /dev/nvme0n1
 meta-data=/dev/nvme0n1           isize=256    agcount=4, agsize=65536 blks
          =                       sectsz=4096  attr=2, projid32bit=1
          =                       crc=0        finobt=0, sparse=0
 data     =                       bsize=4096   blocks=262144, imaxpct=25
          =                       sunit=0      swidth=0 blks
 naming   =version 2              bsize=4096   ascii-ci=0 ftype=1
 log      =internal log           bsize=4096   blocks=2560, version=2
          =                       sectsz=4096  sunit=1 blks, lazy-count=1
 realtime =none                   extsz=4096   blocks=0, rtextents=0
 # mount /dev/nvme0n1 /tmp/
 [  148.923263] XFS (nvme0n1): Mounting V4 Filesystem
 [  148.961196] XFS (nvme0n1): Ending clean mount
 # dd if=/dev/urandom of=test.bin bs=1M count=128
 128+0 records in
 128+0 records out
 134217728 bytes (134 MB, 128 MiB) copied, 0.437991 s, 306 MB/s
 # sha256sum test.bin
 cde42941f045efa8c4f0f157ab6f29741753cdd8d1cff93a6b03649d83c4129a  test.bin
 # cp test.bin /tmp/
 sha256sum /tmp/test.bin
 cde42941f045efa8c4f0f157ab6f29741753cdd8d1cff93a6b03649d83c4129a  /tmp/test.bin

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/sw/rxe/rxe_resp.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/infiniband/sw/rxe/rxe_resp.c
+++ b/drivers/infiniband/sw/rxe/rxe_resp.c
@@ -471,8 +471,6 @@ static enum resp_states check_rkey(struc
 				state = RESPST_ERR_LENGTH;
 				goto err;
 			}
-
-			qp->resp.resid = mtu;
 		} else {
 			if (pktlen != resid) {
 				state = RESPST_ERR_LENGTH;

[PATCH 4.9 116/177] md/raid10: skip spare disk as first disk

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shaohua Li <shli@fb.com>


[ Upstream commit b506335e5d2b4ec687dde392a3bdbf7601778f1d ]

Commit 6f287ca(md/raid10: reset the 'first' at the end of loop) ignores
a case in reshape, the first rdev could be a spare disk, which shouldn't
be accounted as the first disk since it doesn't include the offset info.

Fix: 6f287ca(md/raid10: reset the 'first' at the end of loop)
Cc: Guoqing Jiang <gqjiang@suse.com>
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/raid10.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -4089,6 +4089,7 @@ static int raid10_start_reshape(struct m
 				diff = 0;
 			if (first || diff < min_offset_diff)
 				min_offset_diff = diff;
+			first = 0;
 		}
 	}
 

[PATCH 4.9 117/177] ACPI / power: Delay turning off unused power resources after suspend

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>


[ Upstream commit 8ece1d83346bcc431090d59a2184276192189cdd ]

Commit 660b1113e0f3 (ACPI / PM: Fix consistency check for power resources
during resume) introduced a check for ACPI power resources which have
been turned on by the BIOS during suspend and turns these back off again.

This is causing problems on a Dell Venue Pro 11 7130 (i5-4300Y) it causes
the following messages to show up in dmesg:

[  131.014605] ACPI: Waking up from system sleep state S3
[  131.150271] acpi LNXPOWER:07: Turning OFF
[  131.150323] acpi LNXPOWER:06: Turning OFF
[  131.150911] acpi LNXPOWER:00: Turning OFF
[  131.169014] ACPI : EC: interrupt unblocked
[  131.181811] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  133.535728] pci_raw_set_power_state: 76 callbacks suppressed
[  133.535735] iwlwifi 0000:01:00.0: Refused to change power state,
               currently in D3
[  133.597672] PM: noirq resume of devices complete after 2428.891 msecs

Followed by a bunch of iwlwifi errors later on and the pcie device
dropping from the bus (acpiphp thinks it has been unplugged).

Disabling the turning off of unused power resources fixes this. Instead
of adding a quirk for this system, this commit fixes this by moving the
disabling of unused power resources to later in the resume sequence
when the iwlwifi card has been moved out of D3 so the ref_count for
its power resource no longer is 0.

This new behavior seems to match the intend of the original commit which
commit-msg says: "(... which means that no devices are going to need them
any time soon) and we should turn them off".

This also avoids power resources which we need when bringing devices out
of D3 from getting bounced off and then back on again.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/power.c |   10 ++++++++++
 drivers/acpi/sleep.c |    1 +
 drivers/acpi/sleep.h |    1 +
 3 files changed, 12 insertions(+)

--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -864,6 +864,16 @@ void acpi_resume_power_resources(void)
 
 		mutex_unlock(&resource->resource_lock);
 	}
+
+	mutex_unlock(&power_resource_list_lock);
+}
+
+void acpi_turn_off_unused_power_resources(void)
+{
+	struct acpi_power_resource *resource;
+
+	mutex_lock(&power_resource_list_lock);
+
 	list_for_each_entry_reverse(resource, &acpi_power_resource_list, list_node) {
 		int result, state;
 
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -474,6 +474,7 @@ static void acpi_pm_start(u32 acpi_state
  */
 static void acpi_pm_end(void)
 {
+	acpi_turn_off_unused_power_resources();
 	acpi_scan_lock_release();
 	/*
 	 * This is necessary in case acpi_pm_finish() is not called during a
--- a/drivers/acpi/sleep.h
+++ b/drivers/acpi/sleep.h
@@ -6,6 +6,7 @@ extern struct list_head acpi_wakeup_devi
 extern struct mutex acpi_device_lock;
 
 extern void acpi_resume_power_resources(void);
+extern void acpi_turn_off_unused_power_resources(void);
 
 static inline acpi_status acpi_set_waking_vector(u32 wakeup_address)
 {

[PATCH 4.9 118/177] ia64: fix module loading for gcc-5.4

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sergei Trofimovich <slyfox@gentoo.org>


[ Upstream commit a25fb8508c1b80dce742dbeaa4d75a1e9f2c5617 ]

Starting from gcc-5.4+ gcc generates MLX instructions in more cases to
refer local symbols:

    https://gcc.gnu.org/PR60465

That caused ia64 module loader to choke on such instructions:

    fuse: invalid slot number 1 for IMM64

The Linux kernel used to handle only case where relocation pointed to
slot=2 instruction in the bundle.  That limitation was fixed in linux by
commit 9c184a073bfd ("[IA64] Fix 2.6 kernel for the new ia64 assembler")
See

    http://sources.redhat.com/bugzilla/show_bug.cgi?id=1433

This change lifts the slot=2 restriction from the kernel module loader.

Tested on 'fuse' and 'btrfs' kernel modules.

Cc: Markus Elfring <elfring@users.sourceforge.net>
Cc: H J Lu <hjl.tools@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Bug: https://bugs.gentoo.org/601014
Tested-by: Émeric MASCHINO <emeric.maschino@gmail.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/ia64/kernel/module.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -153,7 +153,7 @@ slot (const struct insn *insn)
 static int
 apply_imm64 (struct module *mod, struct insn *insn, uint64_t val)
 {
-	if (slot(insn) != 2) {
+	if (slot(insn) != 1 && slot(insn) != 2) {
 		printk(KERN_ERR "%s: invalid slot number %d for IMM64\n",
 		       mod->name, slot(insn));
 		return 0;
@@ -165,7 +165,7 @@ apply_imm64 (struct module *mod, struct
 static int
 apply_imm60 (struct module *mod, struct insn *insn, uint64_t val)
 {
-	if (slot(insn) != 2) {
+	if (slot(insn) != 1 && slot(insn) != 2) {
 		printk(KERN_ERR "%s: invalid slot number %d for IMM60\n",
 		       mod->name, slot(insn));
 		return 0;

[PATCH 4.9 119/177] tcm_fileio: Prevent information leak for short reads

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Monakhov <dmonakhov@openvz.org>


[ Upstream commit f11b55d13563e9428c88c873f4f03a6bef11ec0a ]

If we failed to read data from backing file (probably because some one
truncate file under us), we must zerofill cmd's data, otherwise it will
be returned as is. Most likely cmd's data are unitialized pages from
page cache. This result in information leak.

(Change BUG_ON into -EINVAL se_cmd failure - nab)

testcase: https://github.com/dmonakhov/xfstests/commit/e11a1b7b907ca67b1be51a1594025600767366d5
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/target/target_core_file.c |   23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -276,12 +276,11 @@ static int fd_do_rw(struct se_cmd *cmd,
 	else
 		ret = vfs_iter_read(fd, &iter, &pos);
 
-	kfree(bvec);
-
 	if (is_write) {
 		if (ret < 0 || ret != data_length) {
 			pr_err("%s() write returned %d\n", __func__, ret);
-			return (ret < 0 ? ret : -EINVAL);
+			if (ret >= 0)
+				ret = -EINVAL;
 		}
 	} else {
 		/*
@@ -294,17 +293,29 @@ static int fd_do_rw(struct se_cmd *cmd,
 				pr_err("%s() returned %d, expecting %u for "
 						"S_ISBLK\n", __func__, ret,
 						data_length);
-				return (ret < 0 ? ret : -EINVAL);
+				if (ret >= 0)
+					ret = -EINVAL;
 			}
 		} else {
 			if (ret < 0) {
 				pr_err("%s() returned %d for non S_ISBLK\n",
 						__func__, ret);
-				return ret;
+			} else if (ret != data_length) {
+				/*
+				 * Short read case:
+				 * Probably some one truncate file under us.
+				 * We must explicitly zero sg-pages to prevent
+				 * expose uninizialized pages to userspace.
+				 */
+				if (ret < data_length)
+					ret += iov_iter_zero(data_length - ret, &iter);
+				else
+					ret = -EINVAL;
 			}
 		}
 	}
-	return 1;
+	kfree(bvec);
+	return ret;
 }
 
 static sense_reason_t

[PATCH 4.9 120/177] x86/xen: split xen_smp_prepare_boot_cpu()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vitaly Kuznetsov <vkuznets@redhat.com>


[ Upstream commit a2d1078a35f9a38ae888aa6147e4ca32666154a1 ]

Split xen_smp_prepare_boot_cpu() into xen_pv_smp_prepare_boot_cpu() and
xen_hvm_smp_prepare_boot_cpu() to support further splitting of smp.c.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/xen/smp.c |   49 ++++++++++++++++++++++++++++++-------------------
 1 file changed, 30 insertions(+), 19 deletions(-)

--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -299,35 +299,46 @@ static void __init xen_filter_cpu_maps(v
 
 }
 
-static void __init xen_smp_prepare_boot_cpu(void)
+static void __init xen_pv_smp_prepare_boot_cpu(void)
 {
 	BUG_ON(smp_processor_id() != 0);
 	native_smp_prepare_boot_cpu();
 
-	if (xen_pv_domain()) {
-		if (!xen_feature(XENFEAT_writable_page_tables))
-			/* We've switched to the "real" per-cpu gdt, so make
-			 * sure the old memory can be recycled. */
-			make_lowmem_page_readwrite(xen_initial_gdt);
+	if (!xen_feature(XENFEAT_writable_page_tables))
+		/* We've switched to the "real" per-cpu gdt, so make
+		 * sure the old memory can be recycled. */
+		make_lowmem_page_readwrite(xen_initial_gdt);
 
 #ifdef CONFIG_X86_32
-		/*
-		 * Xen starts us with XEN_FLAT_RING1_DS, but linux code
-		 * expects __USER_DS
-		 */
-		loadsegment(ds, __USER_DS);
-		loadsegment(es, __USER_DS);
+	/*
+	 * Xen starts us with XEN_FLAT_RING1_DS, but linux code
+	 * expects __USER_DS
+	 */
+	loadsegment(ds, __USER_DS);
+	loadsegment(es, __USER_DS);
 #endif
 
-		xen_filter_cpu_maps();
-		xen_setup_vcpu_info_placement();
-	}
+	xen_filter_cpu_maps();
+	xen_setup_vcpu_info_placement();
+
+	/*
+	 * The alternative logic (which patches the unlock/lock) runs before
+	 * the smp bootup up code is activated. Hence we need to set this up
+	 * the core kernel is being patched. Otherwise we will have only
+	 * modules patched but not core code.
+	 */
+	xen_init_spinlocks();
+}
+
+static void __init xen_hvm_smp_prepare_boot_cpu(void)
+{
+	BUG_ON(smp_processor_id() != 0);
+	native_smp_prepare_boot_cpu();
 
 	/*
 	 * Setup vcpu_info for boot CPU.
 	 */
-	if (xen_hvm_domain())
-		xen_vcpu_setup(0);
+	xen_vcpu_setup(0);
 
 	/*
 	 * The alternative logic (which patches the unlock/lock) runs before
@@ -733,7 +744,7 @@ static irqreturn_t xen_irq_work_interrup
 }
 
 static const struct smp_ops xen_smp_ops __initconst = {
-	.smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu,
+	.smp_prepare_boot_cpu = xen_pv_smp_prepare_boot_cpu,
 	.smp_prepare_cpus = xen_smp_prepare_cpus,
 	.smp_cpus_done = xen_smp_cpus_done,
 
@@ -772,5 +783,5 @@ void __init xen_hvm_smp_init(void)
 	smp_ops.cpu_die = xen_cpu_die;
 	smp_ops.send_call_func_ipi = xen_smp_send_call_function_ipi;
 	smp_ops.send_call_func_single_ipi = xen_smp_send_call_function_single_ipi;
-	smp_ops.smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu;
+	smp_ops.smp_prepare_boot_cpu = xen_hvm_smp_prepare_boot_cpu;
 }

[PATCH 4.9 121/177] video: fbdev: udlfb: Fix buffer on stack

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maksim Salau <maksim.salau@gmail.com>


[ Upstream commit 45f580c42e5c125d55dbd8099750a1998de3d917 ]

Allocate buffers on HEAP instead of STACK for local array
that is to be sent using usb_control_msg().

Signed-off-by: Maksim Salau <maksim.salau@gmail.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/udlfb.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -1487,15 +1487,25 @@ static struct device_attribute fb_device
 static int dlfb_select_std_channel(struct dlfb_data *dev)
 {
 	int ret;
-	u8 set_def_chn[] = {	   0x57, 0xCD, 0xDC, 0xA7,
+	void *buf;
+	static const u8 set_def_chn[] = {
+				0x57, 0xCD, 0xDC, 0xA7,
 				0x1C, 0x88, 0x5E, 0x15,
 				0x60, 0xFE, 0xC6, 0x97,
 				0x16, 0x3D, 0x47, 0xF2  };
 
+	buf = kmemdup(set_def_chn, sizeof(set_def_chn), GFP_KERNEL);
+
+	if (!buf)
+		return -ENOMEM;
+
 	ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
 			NR_USB_REQUEST_CHANNEL,
 			(USB_DIR_OUT | USB_TYPE_VENDOR), 0, 0,
-			set_def_chn, sizeof(set_def_chn), USB_CTRL_SET_TIMEOUT);
+			buf, sizeof(set_def_chn), USB_CTRL_SET_TIMEOUT);
+
+	kfree(buf);
+
 	return ret;
 }
 

[PATCH 4.9 122/177] sm501fb: dont return zero on failure path in sm501fb_start()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Khoroshilov <khoroshilov@ispras.ru>


[ Upstream commit dc85e9a87420613b3129d5cc5ecd79c58351c546 ]

If fbmem iomemory mapping failed, sm501fb_start() breaks off
initialization, deallocates resources, but returns zero.
As a result, double deallocation can happen in sm501fb_stop().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/sm501fb.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/video/fbdev/sm501fb.c
+++ b/drivers/video/fbdev/sm501fb.c
@@ -1600,6 +1600,7 @@ static int sm501fb_start(struct sm501fb_
 	info->fbmem = ioremap(res->start, resource_size(res));
 	if (info->fbmem == NULL) {
 		dev_err(dev, "cannot remap framebuffer\n");
+		ret = -ENXIO;
 		goto err_mem_res;
 	}
 

[PATCH 4.9 123/177] pNFS: Fix a deadlock when coalescing writes and returning the layout

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@primarydata.com>


[ Upstream commit 61f454e30c18a28924e96be12592c0d5e24bcc81 ]

Consider the following deadlock:

Process P1	Process P2		Process P3
==========	==========		==========
					lock_page(page)

		lseg = pnfs_update_layout(inode)

lo = NFS_I(inode)->layout
pnfs_error_mark_layout_for_return(lo)

		lock_page(page)

					lseg = pnfs_update_layout(inode)

In this scenario,
- P1 has declared the layout to be in error, but P2 holds a reference to
  a layout segment on that inode, so the layoutreturn is deferred.
- P2 is waiting for a page lock held by P3.
- P3 is asking for a new layout segment, but is blocked waiting
  for the layoutreturn.

The fix is to ensure that pnfs_error_mark_layout_for_return() does
not set the NFS_LAYOUT_RETURN flag, which blocks P3. Instead, we allow
the latter to call LAYOUTGET so that it can make progress and unblock
P2.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/pnfs.c |    2 --
 1 file changed, 2 deletions(-)

--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -1953,8 +1953,6 @@ void pnfs_error_mark_layout_for_return(s
 
 	spin_lock(&inode->i_lock);
 	pnfs_set_plh_return_info(lo, range.iomode, 0);
-	/* Block LAYOUTGET */
-	set_bit(NFS_LAYOUT_RETURN, &lo->plh_flags);
 	/*
 	 * mark all matching lsegs so that we are sure to have no live
 	 * segments at hand when sending layoutreturn. See pnfs_put_lseg()

[PATCH 4.9 124/177] net: hns: fix ethtool_get_strings overflow in hns driver

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Timmy Li <lixiaoping3@huawei.com>


[ Upstream commit 412b65d15a7f8a93794653968308fc100f2aa87c ]

hns_get_sset_count() returns HNS_NET_STATS_CNT and the data space allocated
is not enough for ethtool_get_strings(), which will cause random memory
corruption.

When SLAB and DEBUG_SLAB are both enabled, memory corruptions like the
the following can be observed without this patch:
[   43.115200] Slab corruption (Not tainted): Acpi-ParseExt start=ffff801fb0b69030, len=80
[   43.115206] Redzone: 0x9f911029d006462/0x5f78745f31657070.
[   43.115208] Last user: [<5f7272655f746b70>](0x5f7272655f746b70)
[   43.115214] 010: 70 70 65 31 5f 74 78 5f 70 6b 74 00 6b 6b 6b 6b  ppe1_tx_pkt.kkkk
[   43.115217] 030: 70 70 65 31 5f 74 78 5f 70 6b 74 5f 6f 6b 00 6b  ppe1_tx_pkt_ok.k
[   43.115218] Next obj: start=ffff801fb0b69098, len=80
[   43.115220] Redzone: 0x706d655f6f666966/0x9f911029d74e35b.
[   43.115229] Last user: [<ffff0000084b11b0>](acpi_os_release_object+0x28/0x38)
[   43.115231] 000: 74 79 00 6b 6b 6b 6b 6b 70 70 65 31 5f 74 78 5f  ty.kkkkkppe1_tx_
[   43.115232] 010: 70 6b 74 5f 65 72 72 5f 63 73 75 6d 5f 66 61 69  pkt_err_csum_fai

Signed-off-by: Timmy Li <lixiaoping3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c  |    2 +-
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c   |    2 +-
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c   |    2 +-
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c
@@ -671,7 +671,7 @@ static void hns_gmac_get_strings(u32 str
 
 static int hns_gmac_get_sset_count(int stringset)
 {
-	if (stringset == ETH_SS_STATS)
+	if (stringset == ETH_SS_STATS || stringset == ETH_SS_PRIV_FLAGS)
 		return ARRAY_SIZE(g_gmac_stats_string);
 
 	return 0;
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c
@@ -422,7 +422,7 @@ void hns_ppe_update_stats(struct hns_ppe
 
 int hns_ppe_get_sset_count(int stringset)
 {
-	if (stringset == ETH_SS_STATS)
+	if (stringset == ETH_SS_STATS || stringset == ETH_SS_PRIV_FLAGS)
 		return ETH_PPE_STATIC_NUM;
 	return 0;
 }
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c
@@ -798,7 +798,7 @@ void hns_rcb_get_stats(struct hnae_queue
  */
 int hns_rcb_get_ring_sset_count(int stringset)
 {
-	if (stringset == ETH_SS_STATS)
+	if (stringset == ETH_SS_STATS || stringset == ETH_SS_PRIV_FLAGS)
 		return HNS_RING_STATIC_REG_NUM;
 
 	return 0;
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c
@@ -776,7 +776,7 @@ static void hns_xgmac_get_strings(u32 st
  */
 static int hns_xgmac_get_sset_count(int stringset)
 {
-	if (stringset == ETH_SS_STATS)
+	if (stringset == ETH_SS_STATS || stringset == ETH_SS_PRIV_FLAGS)
 		return ARRAY_SIZE(g_xgmac_stats_string);
 
 	return 0;

[PATCH 4.9 125/177] cifs: small underflow in cnvrtDosUnixTm()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>


[ Upstream commit 564277eceeca01e02b1ef3e141cfb939184601b4 ]

January is month 1.  There is no zero-th month.  If someone passes a
zero month then it means we read from one space before the start of the
total_days_of_prev_months[] array.

We may as well also be strict about days as well.

Fixes: 1bd5bbcb6531 ("[CIFS] Legacy time handling for Win9x and OS/2 part 1")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/netmisc.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -980,10 +980,10 @@ struct timespec cnvrtDosUnixTm(__le16 le
 		cifs_dbg(VFS, "illegal hours %d\n", st->Hours);
 	days = sd->Day;
 	month = sd->Month;
-	if ((days > 31) || (month > 12)) {
+	if (days < 1 || days > 31 || month < 1 || month > 12) {
 		cifs_dbg(VFS, "illegal date, month %d day: %d\n", month, days);
-		if (month > 12)
-			month = 12;
+		days = clamp(days, 1, 31);
+		month = clamp(month, 1, 12);
 	}
 	month -= 1;
 	days += total_days_of_prev_months[month];

[PATCH 4.9 126/177] mm: fix check for reclaimable pages in PF_MEMALLOC reclaim throttling

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Weiner <hannes@cmpxchg.org>


[ Upstream commit d450abd81b081d45adb12f303a07dd44b15eb1bc ]

PF_MEMALLOC direct reclaimers get throttled on a node when the sum of
all free pages in each zone fall below half the min watermark.  During
the summation, we want to exclude zones that don't have reclaimables.
Checking the same pgdat over and over again doesn't make sense.

Fixes: 599d0c954f91 ("mm, vmscan: move LRU lists to node")
Link: http://lkml.kernel.org/r/20170228214007.5621-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/vmscan.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2841,8 +2841,10 @@ static bool allow_direct_reclaim(pg_data
 
 	for (i = 0; i <= ZONE_NORMAL; i++) {
 		zone = &pgdat->node_zones[i];
-		if (!managed_zone(zone) ||
-		    pgdat_reclaimable_pages(pgdat) == 0)
+		if (!managed_zone(zone))
+			continue;
+
+		if (!zone_reclaimable_pages(zone))
 			continue;
 
 		pfmemalloc_reserve += min_wmark_pages(zone);

[PATCH 4.9 127/177] mm, vmstat: suppress pcp stats for unpopulated zones in zoneinfo

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Rientjes <rientjes@google.com>


[ Upstream commit 7dfb8bf3b9caef4049bee51d2c22e1c3a311d483 ]

After "mm, vmstat: print non-populated zones in zoneinfo",
/proc/zoneinfo will show unpopulated zones.

The per-cpu pageset statistics are not relevant for unpopulated zones
and can be potentially lengthy, so supress them when they are not
interesting.

Also moves lowmem reserve protection information above pcp stats since
it is relevant for all zones per vm.lowmem_reserve_ratio.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1703061400500.46428@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/vmstat.c |   20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -1387,18 +1387,24 @@ static void zoneinfo_show_print(struct s
 		   zone->present_pages,
 		   zone->managed_pages);
 
-	for (i = 0; i < NR_VM_ZONE_STAT_ITEMS; i++)
-		seq_printf(m, "\n      %-12s %lu", vmstat_text[i],
-				zone_page_state(zone, i));
-
 	seq_printf(m,
 		   "\n        protection: (%ld",
 		   zone->lowmem_reserve[0]);
 	for (i = 1; i < ARRAY_SIZE(zone->lowmem_reserve); i++)
 		seq_printf(m, ", %ld", zone->lowmem_reserve[i]);
-	seq_printf(m,
-		   ")"
-		   "\n  pagesets");
+	seq_putc(m, ')');
+
+	/* If unpopulated, no other information is useful */
+	if (!populated_zone(zone)) {
+		seq_putc(m, '\n');
+		return;
+	}
+
+	for (i = 0; i < NR_VM_ZONE_STAT_ITEMS; i++)
+		seq_printf(m, "\n      %-12s %lu", vmstat_text[i],
+				zone_page_state(zone, i));
+
+	seq_printf(m, "\n  pagesets");
 	for_each_online_cpu(i) {
 		struct per_cpu_pageset *pageset;
 

[PATCH 4.9 128/177] mm: hwpoison: call shake_page() after try_to_unmap() for mlocked page

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>


[ Upstream commit 286c469a988fbaf68e3a97ddf1e6c245c1446968 ]

Memory error handler calls try_to_unmap() for error pages in various
states.  If the error page is a mlocked page, error handling could fail
with "still referenced by 1 users" message.  This is because the page is
linked to and stays in lru cache after the following call chain.

  try_to_unmap_one
    page_remove_rmap
      clear_page_mlock
        putback_lru_page
          lru_cache_add

memory_failure() calls shake_page() to hanlde the similar issue, but
current code doesn't cover because shake_page() is called only before
try_to_unmap().  So this patches adds shake_page().

Fixes: 23a003bfd23ea9ea0b7756b920e51f64b284b468 ("mm/madvise: pass return code of memory_failure() to userspace")
Link: http://lkml.kernel.org/r/20170417055948.GM31394@yexl-desktop
Link: http://lkml.kernel.org/r/1493197841-23986-3-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Xiaolong Ye <xiaolong.ye@intel.com>
Cc: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/memory-failure.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -921,6 +921,7 @@ static int hwpoison_user_mappings(struct
 	int ret;
 	int kill = 1, forcekill;
 	struct page *hpage = *hpagep;
+	bool mlocked = PageMlocked(hpage);
 
 	/*
 	 * Here we are interested only in user-mapped pages, so skip any
@@ -985,6 +986,13 @@ static int hwpoison_user_mappings(struct
 		       pfn, page_mapcount(hpage));
 
 	/*
+	 * try_to_unmap() might put mlocked page in lru cache, so call
+	 * shake_page() again to ensure that it's flushed.
+	 */
+	if (mlocked)
+		shake_page(hpage, 0);
+
+	/*
 	 * Now that the dirty bit has been propagated to the
 	 * struct page and all unmaps done we can decide if
 	 * killing is needed or not.  Only kill when the page

[PATCH 4.9 129/177] rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Moritz Fischer <mdf@kernel.org>


[ Upstream commit 453d0744f6c6ca3f9749b8c57c2e85b5b9f52514 ]

The issue is that the internal counter that triggers the watchdog reset
is actually running at 4096 Hz instead of 1Hz, therefore the value
given by userland (in sec) needs to be multiplied by 4096 to get the
correct behavior.

Fixes: 920f91e50c5b ("drivers/rtc/rtc-ds1374.c: add watchdog support")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-ds1374.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -527,6 +527,10 @@ static long ds1374_wdt_ioctl(struct file
 		if (get_user(new_margin, (int __user *)arg))
 			return -EFAULT;
 
+		/* the hardware's tick rate is 4096 Hz, so
+		 * the counter value needs to be scaled accordingly
+		 */
+		new_margin <<= 12;
 		if (new_margin < 1 || new_margin > 16777216)
 			return -EINVAL;
 
@@ -535,7 +539,8 @@ static long ds1374_wdt_ioctl(struct file
 		ds1374_wdt_ping();
 		/* fallthrough */
 	case WDIOC_GETTIMEOUT:
-		return put_user(wdt_margin, (int __user *)arg);
+		/* when returning ... inverse is true */
+		return put_user((wdt_margin >> 12), (int __user *)arg);
 	case WDIOC_SETOPTIONS:
 		if (copy_from_user(&options, (int __user *)arg, sizeof(int)))
 			return -EFAULT;

[PATCH 4.9 130/177] rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Moritz Fischer <mdf@kernel.org>


[ Upstream commit 538c08f4c89580fc644e2bc64e0a4b86c925da4e ]

The WDIOC_SETOPTIONS case in the watchdog ioctl would alwayss falls
through to the -EINVAL case. This is wrong since thew watchdog does
actually get stopped or started correctly.

Fixes: 920f91e50c5b ("drivers/rtc/rtc-ds1374.c: add watchdog support")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-ds1374.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -548,14 +548,15 @@ static long ds1374_wdt_ioctl(struct file
 		if (options & WDIOS_DISABLECARD) {
 			pr_info("disable watchdog\n");
 			ds1374_wdt_disable();
+			return 0;
 		}
 
 		if (options & WDIOS_ENABLECARD) {
 			pr_info("enable watchdog\n");
 			ds1374_wdt_settimeout(wdt_margin);
 			ds1374_wdt_ping();
+			return 0;
 		}
-
 		return -EINVAL;
 	}
 	return -ENOTTY;

[PATCH 4.9 131/177] ath10k: fix out of bounds access to local buffer

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Mera <dev@michaelmera.com>


[ Upstream commit a16703aaeaedec7a8bee5be5522c7c3e75478951 ]

During write to debugfs file simulate_fw_crash, fixed-size local buffer
'buf' is accessed and modified at index 'count-1', where 'count' is the
size of the write (so potentially out of bounds).
This patch fixes this problem.

Signed-off-by: Michael Mera <dev@michaelmera.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/ath/ath10k/debug.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -624,17 +624,21 @@ static ssize_t ath10k_write_simulate_fw_
 					      size_t count, loff_t *ppos)
 {
 	struct ath10k *ar = file->private_data;
-	char buf[32];
+	char buf[32] = {0};
+	ssize_t rc;
 	int ret;
 
-	simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+	/* filter partial writes and invalid commands */
+	if (*ppos != 0 || count >= sizeof(buf) || count == 0)
+		return -EINVAL;
 
-	/* make sure that buf is null terminated */
-	buf[sizeof(buf) - 1] = 0;
+	rc = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+	if (rc < 0)
+		return rc;
 
 	/* drop the possible '\n' from the end */
-	if (buf[count - 1] == '\n')
-		buf[count - 1] = 0;
+	if (buf[*ppos - 1] == '\n')
+		buf[*ppos - 1] = '\0';
 
 	mutex_lock(&ar->conf_mutex);
 

[PATCH 4.9 132/177] perf tests kmod-path: Dont fail if compressed modules arent supported

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kim Phillips <kim.phillips@arm.com>


[ Upstream commit 805b151a1afd24414706a7f6ae275fbb9649be74 ]

__kmod_path__parse() uses is_supported_compression() to determine and
parse out compressed module file extensions.  On systems without zlib,
this test fails and __kmod_path__parse() continues to strcmp "ko" with
"gz".  Don't do this on those systems.

Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 3c8a67f50a1e ("perf tools: Add kmod_path__parse function")
Link: http://lkml.kernel.org/r/20170503131402.c66e314460026c80cd787b34@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/tests/kmod-path.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/tools/perf/tests/kmod-path.c
+++ b/tools/perf/tests/kmod-path.c
@@ -61,6 +61,7 @@ int test__kmod_path__parse(int subtest _
 	M("/xxxx/xxxx/x-x.ko", PERF_RECORD_MISC_KERNEL, true);
 	M("/xxxx/xxxx/x-x.ko", PERF_RECORD_MISC_USER, false);
 
+#ifdef HAVE_ZLIB_SUPPORT
 	/* path                alloc_name  alloc_ext   kmod  comp  name   ext */
 	T("/xxxx/xxxx/x.ko.gz", true     , true      , true, true, "[x]", "gz");
 	T("/xxxx/xxxx/x.ko.gz", false    , true      , true, true, NULL , "gz");
@@ -96,6 +97,7 @@ int test__kmod_path__parse(int subtest _
 	M("x.ko.gz", PERF_RECORD_MISC_CPUMODE_UNKNOWN, true);
 	M("x.ko.gz", PERF_RECORD_MISC_KERNEL, true);
 	M("x.ko.gz", PERF_RECORD_MISC_USER, false);
+#endif
 
 	/* path            alloc_name  alloc_ext  kmod  comp   name             ext */
 	T("[test_module]", true      , true     , true, false, "[test_module]", NULL);

[PATCH 4.9 133/177] block/mq: Cure cpu hotplug lock inversion

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <peterz@infradead.org>


[ Upstream commit eabe06595d62cfa9278e2cd012df614bc68a7042 ]

By poking at /debug/sched_features I triggered the following splat:

 [] ======================================================
 [] WARNING: possible circular locking dependency detected
 [] 4.11.0-00873-g964c8b7-dirty #694 Not tainted
 [] ------------------------------------------------------
 [] bash/2109 is trying to acquire lock:
 []  (cpu_hotplug_lock.rw_sem){++++++}, at: [<ffffffff8120cb8b>] static_key_slow_dec+0x1b/0x50
 []
 [] but task is already holding lock:
 []  (&sb->s_type->i_mutex_key#4){+++++.}, at: [<ffffffff81140216>] sched_feat_write+0x86/0x170
 []
 [] which lock already depends on the new lock.
 []
 []
 [] the existing dependency chain (in reverse order) is:
 []
 [] -> #2 (&sb->s_type->i_mutex_key#4){+++++.}:
 []        lock_acquire+0x100/0x210
 []        down_write+0x28/0x60
 []        start_creating+0x5e/0xf0
 []        debugfs_create_dir+0x13/0x110
 []        blk_mq_debugfs_register+0x21/0x70
 []        blk_mq_register_dev+0x64/0xd0
 []        blk_register_queue+0x6a/0x170
 []        device_add_disk+0x22d/0x440
 []        loop_add+0x1f3/0x280
 []        loop_init+0x104/0x142
 []        do_one_initcall+0x43/0x180
 []        kernel_init_freeable+0x1de/0x266
 []        kernel_init+0xe/0x100
 []        ret_from_fork+0x31/0x40
 []
 [] -> #1 (all_q_mutex){+.+.+.}:
 []        lock_acquire+0x100/0x210
 []        __mutex_lock+0x6c/0x960
 []        mutex_lock_nested+0x1b/0x20
 []        blk_mq_init_allocated_queue+0x37c/0x4e0
 []        blk_mq_init_queue+0x3a/0x60
 []        loop_add+0xe5/0x280
 []        loop_init+0x104/0x142
 []        do_one_initcall+0x43/0x180
 []        kernel_init_freeable+0x1de/0x266
 []        kernel_init+0xe/0x100
 []        ret_from_fork+0x31/0x40

 []  *** DEADLOCK ***
 []
 [] 3 locks held by bash/2109:
 []  #0:  (sb_writers#11){.+.+.+}, at: [<ffffffff81292bcd>] vfs_write+0x17d/0x1a0
 []  #1:  (debugfs_srcu){......}, at: [<ffffffff8155a90d>] full_proxy_write+0x5d/0xd0
 []  #2:  (&sb->s_type->i_mutex_key#4){+++++.}, at: [<ffffffff81140216>] sched_feat_write+0x86/0x170
 []
 [] stack backtrace:
 [] CPU: 9 PID: 2109 Comm: bash Not tainted 4.11.0-00873-g964c8b7-dirty #694
 [] Hardware name: Intel Corporation S2600GZ/S2600GZ, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013
 [] Call Trace:

 []  lock_acquire+0x100/0x210
 []  get_online_cpus+0x2a/0x90
 []  static_key_slow_dec+0x1b/0x50
 []  static_key_disable+0x20/0x30
 []  sched_feat_write+0x131/0x170
 []  full_proxy_write+0x97/0xd0
 []  __vfs_write+0x28/0x120
 []  vfs_write+0xb5/0x1a0
 []  SyS_write+0x49/0xa0
 []  entry_SYSCALL_64_fastpath+0x23/0xc2

This is because of the cpu hotplug lock rework. Break the chain at #1
by reversing the lock acquisition order. This way i_mutex_key#4 no
longer depends on cpu_hotplug_lock and things are good.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 block/blk-mq.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2014,15 +2014,15 @@ struct request_queue *blk_mq_init_alloca
 
 	blk_mq_init_cpu_queues(q, set->nr_hw_queues);
 
-	get_online_cpus();
 	mutex_lock(&all_q_mutex);
+	get_online_cpus();
 
 	list_add_tail(&q->all_q_node, &all_q_list);
 	blk_mq_add_queue_tag_set(set, q);
 	blk_mq_map_swqueue(q, cpu_online_mask);
 
-	mutex_unlock(&all_q_mutex);
 	put_online_cpus();
+	mutex_unlock(&all_q_mutex);
 
 	return q;
 

[PATCH 4.9 134/177] Bluetooth: hci_qca: Avoid setup failure on missing rampatch

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Loic Poulain <loic.poulain@linaro.org>


[ Upstream commit ba8f3597900291a93604643017fff66a14546015 ]

Assuming that the original code idea was to enable in-band sleeping
only if the setup_rome method returns succes and run in 'standard'
mode otherwise, we should not return setup_rome return value which
makes qca_setup fail if no rampatch/nvm file found.

This fixes BT issue on the dragonboard-820C p4 which includes the
following QCA controller:
hci0: Product:0x00000008
hci0: Patch  :0x00000111
hci0: ROM    :0x00000302
hci0: SOC    :0x00000044

Since there is no rampatch for this controller revision, just make
it work as is.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/hci_qca.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -936,6 +936,9 @@ static int qca_setup(struct hci_uart *hu
 	if (!ret) {
 		set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
 		qca_debugfs_init(hdev);
+	} else if (ret == -ENOENT) {
+		/* No patch/nvm-config found, run with original fw/config */
+		ret = 0;
 	}
 
 	/* Setup bdaddr */

[PATCH 4.9 135/177] Bluetooth: btqcomsmd: Fix skb double free corruption

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Loic Poulain <loic.poulain@linaro.org>


[ Upstream commit 67b8fbead4685b36d290a0ef91c6ddffc4920ec9 ]

In case of hci send frame failure, skb is still owned
by the caller (hci_core) and then should not be freed.

This fixes crash on dragonboard-410c when sending SCO
packet. skb is freed by both btqcomsmd and hci_core.

Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/bluetooth/btqcomsmd.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/bluetooth/btqcomsmd.c
+++ b/drivers/bluetooth/btqcomsmd.c
@@ -85,7 +85,8 @@ static int btqcomsmd_send(struct hci_dev
 		break;
 	}
 
-	kfree_skb(skb);
+	if (!ret)
+		kfree_skb(skb);
 
 	return ret;
 }

[PATCH 4.9 136/177] media: c8sectpfe: fix potential NULL pointer dereference in c8sectpfe_timer_interrupt

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Gustavo A. R. Silva" <garsilva@embeddedor.com>


[ Upstream commit baed3c4bc4c13de93e0dba0a26d601411ebcb389 ]

_channel_ is being dereferenced before it is null checked, hence there is a
potential null pointer dereference. Fix this by moving the pointer dereference
after _channel_ has been null checked.

This issue was detected with the help of Coccinelle.

Fixes: c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support")

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
+++ b/drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c
@@ -83,7 +83,7 @@ static void c8sectpfe_timer_interrupt(un
 static void channel_swdemux_tsklet(unsigned long data)
 {
 	struct channel_info *channel = (struct channel_info *)data;
-	struct c8sectpfei *fei = channel->fei;
+	struct c8sectpfei *fei;
 	unsigned long wp, rp;
 	int pos, num_packets, n, size;
 	u8 *buf;
@@ -91,6 +91,8 @@ static void channel_swdemux_tsklet(unsig
 	if (unlikely(!channel || !channel->irec))
 		return;
 
+	fei = channel->fei;
+
 	wp = readl(channel->irec + DMA_PRDS_BUSWP_TP(0));
 	rp = readl(channel->irec + DMA_PRDS_BUSRP_TP(0));
 

[PATCH 4.9 137/177] drm/msm: fix leak in failed get_pages

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Prakash Kamliya <pkamliya@codeaurora.org>


[ Upstream commit 62e3a3e342af3c313ab38603811ecdb1fcc79edb ]

get_pages doesn't keep a reference of the pages allocated
when it fails later in the code path. This can lead to
a memory leak. Keep reference of the allocated pages so
that it can be freed when msm_gem_free_object gets called
later during cleanup.

Signed-off-by: Prakash Kamliya <pkamliya@codeaurora.org>
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/msm/msm_gem.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/msm/msm_gem.c
+++ b/drivers/gpu/drm/msm/msm_gem.c
@@ -91,14 +91,17 @@ static struct page **get_pages(struct dr
 			return p;
 		}
 
+		msm_obj->pages = p;
+
 		msm_obj->sgt = drm_prime_pages_to_sg(p, npages);
 		if (IS_ERR(msm_obj->sgt)) {
+			void *ptr = ERR_CAST(msm_obj->sgt);
+
 			dev_err(dev->dev, "failed to allocate sgt\n");
-			return ERR_CAST(msm_obj->sgt);
+			msm_obj->sgt = NULL;
+			return ptr;
 		}
 
-		msm_obj->pages = p;
-
 		/* For non-cached buffers, ensure the new pages are clean
 		 * because display controller, GPU, etc. are not coherent:
 		 */
@@ -121,7 +124,10 @@ static void put_pages(struct drm_gem_obj
 		if (msm_obj->flags & (MSM_BO_WC|MSM_BO_UNCACHED))
 			dma_unmap_sg(obj->dev->dev, msm_obj->sgt->sgl,
 					msm_obj->sgt->nents, DMA_BIDIRECTIONAL);
-		sg_free_table(msm_obj->sgt);
+
+		if (msm_obj->sgt)
+			sg_free_table(msm_obj->sgt);
+
 		kfree(msm_obj->sgt);
 
 		if (use_pages(obj))

[PATCH 4.9 138/177] RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert@linux-m68k.org>


[ Upstream commit 302d6424e4a293a5761997e6c9fc3dfb1e4c355f ]

With gcc-4.1.2:

    drivers/infiniband/core/iwpm_util.c: In function ‘iwpm_send_mapinfo’:
    drivers/infiniband/core/iwpm_util.c:647: warning: ‘ret’ may be used uninitialized in this function

Indeed, if nl_client is not found in any of the scanned has buckets, ret
will be used uninitialized.

Preinitialize ret to -EINVAL to fix this.

Fixes: 30dc5e63d6a5ad24 ("RDMA/core: Add support for iWARP Port Mapper user space service")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/core/iwpm_util.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/infiniband/core/iwpm_util.c
+++ b/drivers/infiniband/core/iwpm_util.c
@@ -664,6 +664,7 @@ int iwpm_send_mapinfo(u8 nl_client, int
 	}
 	skb_num++;
 	spin_lock_irqsave(&iwpm_mapinfo_lock, flags);
+	ret = -EINVAL;
 	for (i = 0; i < IWPM_MAPINFO_HASH_SIZE; i++) {
 		hlist_for_each_entry(map_info, &iwpm_hash_bucket[i],
 				     hlist_node) {

[PATCH 4.9 139/177] rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled.

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tsang-Shian Lin <thlin@realtek.com>


[ Upstream commit b7573a0a27bfa8270dea9b145448f6884b7cacc1 ]

Reset the driver current tx read/write index to zero when inactiveps
nic out of sync with HW state. Wrong driver tx read/write index will
cause Tx fail.

Signed-off-by: Tsang-Shian Lin <thlin@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/realtek/rtlwifi/pci.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/net/wireless/realtek/rtlwifi/pci.c
+++ b/drivers/net/wireless/realtek/rtlwifi/pci.c
@@ -1572,7 +1572,14 @@ int rtl_pci_reset_trx_ring(struct ieee80
 				dev_kfree_skb_irq(skb);
 				ring->idx = (ring->idx + 1) % ring->entries;
 			}
+
+			if (rtlpriv->use_new_trx_flow) {
+				rtlpci->tx_ring[i].cur_tx_rp = 0;
+				rtlpci->tx_ring[i].cur_tx_wp = 0;
+			}
+
 			ring->idx = 0;
+			ring->entries = rtlpci->txringcount[i];
 		}
 	}
 	spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);

[PATCH 4.9 140/177] media: bt8xx: Fix err bt878_probe()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>


[ Upstream commit 45392ff6881dbe56d41ef0b17c2e576065f8ffa1 ]

This is odd to call 'pci_disable_device()' in an error path before a
coresponding successful 'pci_enable_device()'.

Return directly instead.

Fixes: 77e0be12100a ("V4L/DVB (4176): Bug-fix: Fix memory overflow")

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/pci/bt8xx/bt878.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/media/pci/bt8xx/bt878.c
+++ b/drivers/media/pci/bt8xx/bt878.c
@@ -422,8 +422,7 @@ static int bt878_probe(struct pci_dev *d
 	       bt878_num);
 	if (bt878_num >= BT878_MAX) {
 		printk(KERN_ERR "bt878: Too many devices inserted\n");
-		result = -ENOMEM;
-		goto fail0;
+		return -ENOMEM;
 	}
 	if (pci_enable_device(dev))
 		return -EIO;

[PATCH 4.9 141/177] ath10k: handling qos at STA side based on AP WMM enable/disable

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Balaji Pothunoori <bpothuno@qti.qualcomm.com>


[ Upstream commit 07ffb4497360ae8789f05555fec8171ee952304d ]

Data packets are not sent by STA in case of STA joined to
non QOS AP (WMM disabled AP). This is happening because of STA
is sending data packets to firmware from host with qos enabled
along with non qos queue value(TID = 16).
Due to qos enabled, firmware is discarding the packet.

This patch fixes this issue by updating the qos based on station
WME capability field if WMM is disabled in AP.

This patch is required by 10.4 family chipsets like
QCA4019/QCA9888/QCA9884/QCA99X0.
Firmware Versoin : 10.4-3.5.1-00018.

For 10.2.4 family chipsets QCA988X/QCA9887 and QCA6174 this patch
has no effect.

Signed-off-by: Balaji Pothunoori <bpothuno@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/ath/ath10k/mac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2505,7 +2505,7 @@ static void ath10k_peer_assoc_h_qos(stru
 		}
 		break;
 	case WMI_VDEV_TYPE_STA:
-		if (vif->bss_conf.qos)
+		if (sta->wme)
 			arg->peer_flags |= arvif->ar->wmi.peer_flags->qos;
 		break;
 	case WMI_VDEV_TYPE_IBSS:

[PATCH 4.9 142/177] media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ron Economos <w6rz@comcast.net>


[ Upstream commit 380a6c86457573aa42d27ae11e025eb25941a0b7 ]

On faster CPUs a delay is required after the resume command and the restart command. Without the delay, the restart command often returns -EREMOTEIO and the Si2168 does not restart.

Note that this patch fixes the same issue as https://patchwork.linuxtv.org/patch/44304/, but I believe my udelay() fix addresses the actual problem.

Signed-off-by: Ron Economos <w6rz@comcast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/dvb-frontends/si2168.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/media/dvb-frontends/si2168.c
+++ b/drivers/media/dvb-frontends/si2168.c
@@ -14,6 +14,8 @@
  *    GNU General Public License for more details.
  */
 
+#include <linux/delay.h>
+
 #include "si2168_priv.h"
 
 static const struct dvb_frontend_ops si2168_ops;
@@ -378,6 +380,7 @@ static int si2168_init(struct dvb_fronte
 		if (ret)
 			goto err;
 
+		udelay(100);
 		memcpy(cmd.args, "\x85", 1);
 		cmd.wlen = 1;
 		cmd.rlen = 1;

[PATCH 4.9 143/177] qmi_wwan: set FLAG_SEND_ZLP to avoid network initiated disconnect

[Greg Kroah-Hartman]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 1518 bytes --]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Bjørn Mork" <bjorn@mork.no>


[ Upstream commit 245d21190aec547c0de64f70c0e6de871c185a24 ]

It has been reported that the dummy byte we add to avoid
ZLPs can be forwarded by the modem to the PGW/GGSN, and that
some operators will drop the connection if this happens.

In theory, QMI devices are based on CDC ECM and should as such
both support ZLPs and silently ignore the dummy byte.  The latter
assumption failed.  Let's test out the first.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/qmi_wwan.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -531,7 +531,7 @@ err:
 
 static const struct driver_info	qmi_wwan_info = {
 	.description	= "WWAN/QMI device",
-	.flags		= FLAG_WWAN,
+	.flags		= FLAG_WWAN | FLAG_SEND_ZLP,
 	.bind		= qmi_wwan_bind,
 	.unbind		= qmi_wwan_unbind,
 	.manage_power	= qmi_wwan_manage_power,
@@ -540,7 +540,7 @@ static const struct driver_info	qmi_wwan
 
 static const struct driver_info	qmi_wwan_info_quirk_dtr = {
 	.description	= "WWAN/QMI device",
-	.flags		= FLAG_WWAN,
+	.flags		= FLAG_WWAN | FLAG_SEND_ZLP,
 	.bind		= qmi_wwan_bind,
 	.unbind		= qmi_wwan_unbind,
 	.manage_power	= qmi_wwan_manage_power,

[PATCH 4.9 144/177] serial: 8250_dw: Disable clock on error

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Potyra <Stefan.Potyra@elektrobit.com>


[ Upstream commit 8af016aa5a27c6a2505460eb4d83f1e70c38dc43 ]

If there is no clock rate for uartclk defined, disable the previously
enabled clock again.

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 23f5b3fdd04e serial: 8250_dw: only get the clock rate in one place
Signed-off-by: Stefan Potyra <Stefan.Potyra@elektrobit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_dw.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -464,7 +464,8 @@ static int dw8250_probe(struct platform_
 	/* If no clock rate is defined, fail. */
 	if (!p->uartclk) {
 		dev_err(dev, "clock rate not defined\n");
-		return -EINVAL;
+		err = -EINVAL;
+		goto err_clk;
 	}
 
 	data->pclk = devm_clk_get(dev, "apb_pclk");

[PATCH 4.9 145/177] cros_ec: fix nul-termination for firmware build info

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>


[ Upstream commit 50a0d71a5d20e1d3eff1d974fdc8559ad6d74892 ]

As gcc-8 reports, we zero out the wrong byte:

drivers/platform/chrome/cros_ec_sysfs.c: In function 'show_ec_version':
drivers/platform/chrome/cros_ec_sysfs.c:190:12: error: array subscript 4294967295 is above array bounds of 'uint8_t[]' [-Werror=array-bounds]

This changes the code back to what it did before changing to a
zero-length array structure.

Fixes: a841178445bb ("mfd: cros_ec: Use a zero-length array for command data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/chrome/cros_ec_sysfs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/platform/chrome/cros_ec_sysfs.c
+++ b/drivers/platform/chrome/cros_ec_sysfs.c
@@ -187,7 +187,7 @@ static ssize_t show_ec_version(struct de
 		count += scnprintf(buf + count, PAGE_SIZE - count,
 				   "Build info:    EC error %d\n", msg->result);
 	else {
-		msg->data[sizeof(msg->data) - 1] = '\0';
+		msg->data[EC_HOST_PARAM_SIZE - 1] = '\0';
 		count += scnprintf(buf + count, PAGE_SIZE - count,
 				   "Build info:    %s\n", msg->data);
 	}

[PATCH 4.9 146/177] watchdog: Fix potential kref imbalance when opening watchdog

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>


[ Upstream commit 4bcd615fad6adddc68b058d498b30a9e0e0db77a ]

If a watchdog driver's open function sets WDOG_HW_RUNNING with the
expectation that the watchdog can not be stopped, but then stops the
watchdog anyway in its stop function, kref_get() wil not be called in
watchdog_open(). If the watchdog then stops on close, WDOG_HW_RUNNING
will be cleared and kref_put() will be called, causing a kref imbalance.
As result the character device data structure will be released, which in
turn will cause the system to crash on the next call to watchdog_open().

Fixes: ee142889e32f5 ("watchdog: Introduce WDOG_HW_RUNNING flag")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/watchdog/watchdog_dev.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -760,6 +760,7 @@ static int watchdog_open(struct inode *i
 {
 	struct watchdog_core_data *wd_data;
 	struct watchdog_device *wdd;
+	bool hw_running;
 	int err;
 
 	/* Get the corresponding watchdog device */
@@ -779,7 +780,8 @@ static int watchdog_open(struct inode *i
 	 * If the /dev/watchdog device is open, we don't want the module
 	 * to be unloaded.
 	 */
-	if (!watchdog_hw_running(wdd) && !try_module_get(wdd->ops->owner)) {
+	hw_running = watchdog_hw_running(wdd);
+	if (!hw_running && !try_module_get(wdd->ops->owner)) {
 		err = -EBUSY;
 		goto out_clear;
 	}
@@ -790,7 +792,7 @@ static int watchdog_open(struct inode *i
 
 	file->private_data = wd_data;
 
-	if (!watchdog_hw_running(wdd))
+	if (!hw_running)
 		kref_get(&wd_data->kref);
 
 	/* dev/watchdog is a virtual (and thus non-seekable) filesystem */

[PATCH 4.9 147/177] platform/chrome: Use proper protocol transfer function

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shawn Nematbakhsh <shawnn@chromium.org>


[ Upstream commit d48b8c58c57f6edbe2965f0a5f62c5cf9593ca96 ]

pkt_xfer should be used for protocol v3, and cmd_xfer otherwise. We had
one instance of these functions correct, but not the second, fall-back
case. We use the fall-back only when the first command returns an
IN_PROGRESS status, which is only used on some EC firmwares where we
don't want to constantly poll the bus, but instead back off and
sleep/retry for a little while.

Fixes: 2c7589af3c4d ("mfd: cros_ec: add proto v3 skeleton")
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/chrome/cros_ec_proto.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -60,12 +60,14 @@ static int send_command(struct cros_ec_d
 			struct cros_ec_command *msg)
 {
 	int ret;
+	int (*xfer_fxn)(struct cros_ec_device *ec, struct cros_ec_command *msg);
 
 	if (ec_dev->proto_version > 2)
-		ret = ec_dev->pkt_xfer(ec_dev, msg);
+		xfer_fxn = ec_dev->pkt_xfer;
 	else
-		ret = ec_dev->cmd_xfer(ec_dev, msg);
+		xfer_fxn = ec_dev->cmd_xfer;
 
+	ret = (*xfer_fxn)(ec_dev, msg);
 	if (msg->result == EC_RES_IN_PROGRESS) {
 		int i;
 		struct cros_ec_command *status_msg;
@@ -88,7 +90,7 @@ static int send_command(struct cros_ec_d
 		for (i = 0; i < EC_COMMAND_RETRIES; i++) {
 			usleep_range(10000, 11000);
 
-			ret = ec_dev->cmd_xfer(ec_dev, status_msg);
+			ret = (*xfer_fxn)(ec_dev, status_msg);
 			if (ret < 0)
 				break;
 

[PATCH 4.9 148/177] dmaengine: zynqmp_dma: Fix race condition in the probe

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kedareswara rao Appana <appana.durga.rao@xilinx.com>


[ Upstream commit 5ba080aada5e739165e0f38d5cc3b04c82b323c8 ]

Incase of interrupt property is not present,
Driver is trying to free an invalid irq,
This patch fixes it by adding a check before freeing the irq.

Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/xilinx/zynqmp_dma.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/dma/xilinx/zynqmp_dma.c
+++ b/drivers/dma/xilinx/zynqmp_dma.c
@@ -933,7 +933,8 @@ static void zynqmp_dma_chan_remove(struc
 	if (!chan)
 		return;
 
-	devm_free_irq(chan->zdev->dev, chan->irq, chan);
+	if (chan->irq)
+		devm_free_irq(chan->zdev->dev, chan->irq, chan);
 	tasklet_kill(&chan->tasklet);
 	list_del(&chan->common.device_node);
 	clk_disable_unprepare(chan->clk_apb);

[PATCH 4.9 149/177] drm/tilcdc: ensure nonatomic iowrite64 is not used

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Logan Gunthorpe <logang@deltatee.com>


[ Upstream commit 4e5ca2d930aa8714400aedf4bf1dc959cb04280f ]

Add a check to ensure iowrite64 is only used if it is atomic.

It was decided in [1] that the tilcdc driver should not be using an
atomic operation (so it was left out of this patchset). However, it turns
out that through the drm code, a nonatomic header is actually included:

include/linux/io-64-nonatomic-lo-hi.h
is included from include/drm/drm_os_linux.h:9:0,
            from include/drm/drmP.h:74,
            from include/drm/drm_modeset_helper.h:26,
            from include/drm/drm_atomic_helper.h:33,
            from drivers/gpu/drm/tilcdc/tilcdc_crtc.c:19:

And thus, without this change, this patchset would inadvertantly
change the behaviour of the tilcdc driver.

[1] lkml.kernel.org/r/CAK8P3a2HhO_zCnsTzq7hmWSz5La5Thu19FWZpun16iMnyyNreQ@mail.gmail.com

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/tilcdc/tilcdc_regs.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/tilcdc/tilcdc_regs.h
+++ b/drivers/gpu/drm/tilcdc/tilcdc_regs.h
@@ -124,7 +124,7 @@ static inline void tilcdc_write64(struct
 	struct tilcdc_drm_private *priv = dev->dev_private;
 	volatile void __iomem *addr = priv->mmio + reg;
 
-#ifdef iowrite64
+#if defined(iowrite64) && !defined(iowrite64_is_nonatomic)
 	iowrite64(data, addr);
 #else
 	__iowmb();

[PATCH 4.9 150/177] mmc: avoid removing non-removable hosts during suspend

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Drake <drake@endlessm.com>


[ Upstream commit de8dcc3d2c0e08e5068ee1e26fc46415c15e3637 ]

The Weibu F3C MiniPC has an onboard AP6255 module, presenting
two SDIO functions on a single MMC host (Bluetooth/btsdio and
WiFi/brcmfmac), and the mmc layer correctly detects this as
non-removable.

After suspend/resume, the wifi and bluetooth interfaces disappear
and do not get probed again.

The conditions here are:

 1. During suspend, we reach mmc_pm_notify()

 2. mmc_pm_notify() calls mmc_sdio_pre_suspend() to see if we can
    suspend the SDIO host. However, mmc_sdio_pre_suspend() returns
    -ENOSYS because btsdio_driver does not have a suspend method.

 3. mmc_pm_notify() proceeds to remove the card

 4. Upon resume, mmc_rescan() does nothing with this host, because of
    the rescan_entered check which aims to only scan a non-removable
    device a single time (i.e. during boot).

Fix the loss of functionality by detecting that we are unable to
suspend a non-removable host, so avoid the forced removal in that
case. The comment above this function already indicates that this
code was only intended for removable devices.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/core/core.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2974,6 +2974,14 @@ static int mmc_pm_notify(struct notifier
 		if (!err)
 			break;
 
+		if (!mmc_card_is_removable(host)) {
+			dev_warn(mmc_dev(host),
+				 "pre_suspend failed for non-removable host: "
+				 "%d\n", err);
+			/* Avoid removing non-removable hosts */
+			break;
+		}
+
 		/* Calling bus_ops->remove() with a claimed host can deadlock */
 		host->bus_ops->remove(host);
 		mmc_claim_host(host);

[PATCH 4.9 151/177] rtc: ac100: Fix multiple race conditions

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Belloni <alexandre.belloni@free-electrons.com>


[ Upstream commit 994ec64c0a193940be7a6fd074668b9446d3b6c3 ]

The probe function is not allowed to fail after registering the RTC because
the following may happen:

CPU0:                                CPU1:
sys_load_module()
 do_init_module()
  do_one_initcall()
   cmos_do_probe()
    rtc_device_register()
     __register_chrdev()
     cdev->owner = struct module*
                                     open("/dev/rtc0")
    rtc_device_unregister()
  module_put()
  free_module()
   module_free(mod->module_core)
   /* struct module *module is now
      freed */
                                      chrdev_open()
                                       spin_lock(cdev_lock)
                                       cdev_get()
                                        try_module_get()
                                         module_is_live()
                                         /* dereferences already
                                            freed struct module* */

Also, the interrupt handler: ac100_rtc_irq() is dereferencing chip->rtc but
this may still be NULL when it is called, resulting in:
Unable to handle kernel NULL pointer dereference at virtual address 00000194
pgd = (ptrval)
[00000194] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 72 Comm: irq/71-ac100-rt Not tainted 4.15.0-rc1-next-20171201-dirty #120
Hardware name: Allwinner sun8i Family
task: (ptrval) task.stack: (ptrval)
PC is at mutex_lock+0x14/0x3c
LR is at ac100_rtc_irq+0x38/0xc8
pc : [<c06543a4>]    lr : [<c04d9a2c>]    psr: 60000053
sp : ee9c9f28  ip : 00000000  fp : ee9adfdc
r10: 00000000  r9 : c0a04c48  r8 : c015ed18
r7 : ee9bd600  r6 : ee9c9f28  r5 : ee9af590  r4 : c0a04c48
r3 : ef3cb3c0  r2 : 00000000  r1 : ee9af590  r0 : 00000194
Flags: nZCv  IRQs on  FIQs off  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 4000406a  DAC: 00000051
Process irq/71-ac100-rt (pid: 72, stack limit = 0x(ptrval))
Stack: (0xee9c9f28 to 0xee9ca000)
9f20:                   00000000 7c2fd1be c015ed18 ee9adf40 ee9c0400 ee9c0400
9f40: ee9adf40 c015ed34 ee9c8000 ee9adf64 ee9c0400 c015f040 ee9adf80 00000000
9f60: c015ee24 7c2fd1be ee9adfc0 ee9adf80 00000000 ee9c8000 ee9adf40 c015eef4
9f80: ef1eba34 c0138f14 ee9c8000 ee9adf80 c0138df4 00000000 00000000 00000000
9fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
[<c06543a4>] (mutex_lock) from [<c04d9a2c>] (ac100_rtc_irq+0x38/0xc8)
[<c04d9a2c>] (ac100_rtc_irq) from [<c015ed34>] (irq_thread_fn+0x1c/0x54)
[<c015ed34>] (irq_thread_fn) from [<c015f040>] (irq_thread+0x14c/0x214)
[<c015f040>] (irq_thread) from [<c0138f14>] (kthread+0x120/0x150)
[<c0138f14>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)

Solve both issues by moving to
devm_rtc_allocate_device()/rtc_register_device()

Reported-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rtc/rtc-ac100.c |   19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

--- a/drivers/rtc/rtc-ac100.c
+++ b/drivers/rtc/rtc-ac100.c
@@ -567,6 +567,12 @@ static int ac100_rtc_probe(struct platfo
 		return chip->irq;
 	}
 
+	chip->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(chip->rtc))
+		return PTR_ERR(chip->rtc);
+
+	chip->rtc->ops = &ac100_rtc_ops;
+
 	ret = devm_request_threaded_irq(&pdev->dev, chip->irq, NULL,
 					ac100_rtc_irq,
 					IRQF_SHARED | IRQF_ONESHOT,
@@ -586,17 +592,16 @@ static int ac100_rtc_probe(struct platfo
 	/* clear counter alarm pending interrupts */
 	regmap_write(chip->regmap, AC100_ALM_INT_STA, AC100_ALM_INT_ENABLE);
 
-	chip->rtc = devm_rtc_device_register(&pdev->dev, "rtc-ac100",
-					     &ac100_rtc_ops, THIS_MODULE);
-	if (IS_ERR(chip->rtc)) {
-		dev_err(&pdev->dev, "unable to register device\n");
-		return PTR_ERR(chip->rtc);
-	}
-
 	ret = ac100_rtc_register_clks(chip);
 	if (ret)
 		return ret;
 
+	ret = rtc_register_device(chip->rtc);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to register device\n");
+		return ret;
+	}
+
 	dev_info(&pdev->dev, "RTC enabled\n");
 
 	return 0;

[PATCH 4.9 152/177] IB/ipoib: Avoid memory leak if the SA returns a different DGID

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Erez Shitrit <erezsh@mellanox.com>


[ Upstream commit 439000892ee17a9c92f1e4297818790ef8bb4ced ]

The ipoib path database is organized around DGIDs from the LLADDR, but the
SA is free to return a different GID when asked for path. This causes a
bug because the SA's modified DGID is copied into the database key, even
though it is no longer the correct lookup key, causing a memory leak and
other malfunctions.

Ensure the database key does not change after the SA query completes.

Demonstration of the bug is as  follows
ipoib wants to send to GID fe80:0000:0000:0000:0002:c903:00ef:5ee2, it
creates new record in the DB with that gid as a key, and issues a new
request to the SM.
Now, the SM from some reason returns path-record with other SGID (for
example, 2001:0000:0000:0000:0002:c903:00ef:5ee2 that contains the local
subnet prefix) now ipoib will overwrite the current entry with the new
one, and if new request to the original GID arrives ipoib  will not find
it in the DB (was overwritten) and will create new record that in its
turn will also be overwritten by the response from the SM, and so on
till the driver eats all the device memory.

Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/ulp/ipoib/ipoib_main.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -799,6 +799,22 @@ static void path_rec_completion(int stat
 	spin_lock_irqsave(&priv->lock, flags);
 
 	if (!IS_ERR_OR_NULL(ah)) {
+		/*
+		 * pathrec.dgid is used as the database key from the LLADDR,
+		 * it must remain unchanged even if the SA returns a different
+		 * GID to use in the AH.
+		 */
+		if (memcmp(pathrec->dgid.raw, path->pathrec.dgid.raw,
+			   sizeof(union ib_gid))) {
+			ipoib_dbg(
+				priv,
+				"%s got PathRec for gid %pI6 while asked for %pI6\n",
+				dev->name, pathrec->dgid.raw,
+				path->pathrec.dgid.raw);
+			memcpy(pathrec->dgid.raw, path->pathrec.dgid.raw,
+			       sizeof(union ib_gid));
+		}
+
 		path->pathrec = *pathrec;
 
 		old_ah   = path->ah;

[PATCH 4.9 153/177] RDMA/cma: Use correct size when writing netlink stats

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Parav Pandit <parav@mellanox.com>


[ Upstream commit 7baaa49af3716fb31877c61f59b74d029ce15b75 ]

The code was using the src size when formatting the dst. They are almost
certainly the same value but it reads wrong.

Fixes: ce117ffac2e9 ("RDMA/cma: Export AF_IB statistics")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/core/cma.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -4336,7 +4336,7 @@ static int cma_get_id_stats(struct sk_bu
 					  RDMA_NL_RDMA_CM_ATTR_SRC_ADDR))
 				goto out;
 			if (ibnl_put_attr(skb, nlh,
-					  rdma_addr_size(cma_src_addr(id_priv)),
+					  rdma_addr_size(cma_dst_addr(id_priv)),
 					  cma_dst_addr(id_priv),
 					  RDMA_NL_RDMA_CM_ATTR_DST_ADDR))
 				goto out;

[PATCH 4.9 154/177] IB/umem: Fix use of npages/nmap fields

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Artemy Kovalyov <artemyko@mellanox.com>


[ Upstream commit edf1a84fe37c51290e2c88154ecaf48dadff3d27 ]

In ib_umem structure npages holds original number of sg entries, while
nmap is number of DMA blocks returned by dma_map_sg.

Fixes: c5d76f130b28 ('IB/core: Add umem function to read data from user-space')
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/core/umem.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -357,7 +357,7 @@ int ib_umem_copy_from(void *dst, struct
 		return -EINVAL;
 	}
 
-	ret = sg_pcopy_to_buffer(umem->sg_head.sgl, umem->nmap, dst, length,
+	ret = sg_pcopy_to_buffer(umem->sg_head.sgl, umem->npages, dst, length,
 				 offset + ib_umem_offset(umem));
 
 	if (ret < 0)

[PATCH 4.9 155/177] iser-target: avoid reinitializing rdma contexts for isert commands

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bharat Potnuri <bharat@chelsio.com>


[ Upstream commit 66f53e6f5400578bae58db0c06d85a8820831f40 ]

isert commands that failed during isert_rdma_rw_ctx_post() are queued to
Queue-Full(QF) queue and are scheduled to be reposted during queue-full
queue processing. During this reposting, the rdma contexts are initialised
again in isert_rdma_rw_ctx_post(), which is leaking significant memory.

unreferenced object 0xffff8830201d9640 (size 64):
  comm "kworker/0:2", pid 195, jiffies 4295374851 (age 4528.436s)
  hex dump (first 32 bytes):
    00 60 8b cb 2e 00 00 00 00 10 00 00 00 00 00 00  .`..............
    00 90 e3 cb 2e 00 00 00 00 10 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff8170711e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff811f8ba5>] __kmalloc+0x125/0x2b0
    [<ffffffffa046b24f>] rdma_rw_ctx_init+0x15f/0x6f0 [ib_core]
    [<ffffffffa07ab644>] isert_rdma_rw_ctx_post+0xc4/0x3c0 [ib_isert]
    [<ffffffffa07ad972>] isert_put_datain+0x112/0x1c0 [ib_isert]
    [<ffffffffa07dddce>] lio_queue_data_in+0x2e/0x30 [iscsi_target_mod]
    [<ffffffffa076c322>] target_qf_do_work+0x2b2/0x4b0 [target_core_mod]
    [<ffffffff81080c3b>] process_one_work+0x1db/0x5d0
    [<ffffffff8108107d>] worker_thread+0x4d/0x3e0
    [<ffffffff81088667>] kthread+0x117/0x150
    [<ffffffff81713fa7>] ret_from_fork+0x27/0x40
    [<ffffffffffffffff>] 0xffffffffffffffff

Here is patch to use the older rdma contexts while reposting
the isert commands intead of reinitialising them.

Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/ulp/isert/ib_isert.c |    7 +++++++
 drivers/infiniband/ulp/isert/ib_isert.h |    1 +
 2 files changed, 8 insertions(+)

--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -2098,6 +2098,9 @@ isert_rdma_rw_ctx_post(struct isert_cmd
 	u32 rkey, offset;
 	int ret;
 
+	if (cmd->ctx_init_done)
+		goto rdma_ctx_post;
+
 	if (dir == DMA_FROM_DEVICE) {
 		addr = cmd->write_va;
 		rkey = cmd->write_stag;
@@ -2125,11 +2128,15 @@ isert_rdma_rw_ctx_post(struct isert_cmd
 				se_cmd->t_data_sg, se_cmd->t_data_nents,
 				offset, addr, rkey, dir);
 	}
+
 	if (ret < 0) {
 		isert_err("Cmd: %p failed to prepare RDMA res\n", cmd);
 		return ret;
 	}
 
+	cmd->ctx_init_done = true;
+
+rdma_ctx_post:
 	ret = rdma_rw_ctx_post(&cmd->rw, conn->qp, port_num, cqe, chain_wr);
 	if (ret < 0)
 		isert_err("Cmd: %p failed to post RDMA res\n", cmd);
--- a/drivers/infiniband/ulp/isert/ib_isert.h
+++ b/drivers/infiniband/ulp/isert/ib_isert.h
@@ -124,6 +124,7 @@ struct isert_cmd {
 	struct rdma_rw_ctx	rw;
 	struct work_struct	comp_work;
 	struct scatterlist	sg;
+	bool			ctx_init_done;
 };
 
 static inline struct isert_cmd *tx_desc_to_cmd(struct iser_tx_desc *desc)

[PATCH 4.9 156/177] vgacon: Set VGA struct resource types

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjorn Helgaas <bhelgaas@google.com>


[ Upstream commit c82084117f79bcae085e40da526253736a247120 ]

Set the resource type when we reserve VGA-related I/O port resources.

The resource code doesn't actually look at the type, so it inserts
resources without a type in the tree correctly even without this change.
But if we ever print a resource without a type, it looks like this:

  vga+ [??? 0x000003c0-0x000003df flags 0x0]

Setting the type means it will be printed correctly as:

  vga+ [io  0x000003c0-0x000003df]

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/alpha/kernel/console.c    |    1 +
 drivers/video/console/vgacon.c |   34 ++++++++++++++++++++++++++--------
 2 files changed, 27 insertions(+), 8 deletions(-)

--- a/arch/alpha/kernel/console.c
+++ b/arch/alpha/kernel/console.c
@@ -20,6 +20,7 @@
 struct pci_controller *pci_vga_hose;
 static struct resource alpha_vga = {
 	.name	= "alpha-vga+",
+	.flags	= IORESOURCE_IO,
 	.start	= 0x3C0,
 	.end	= 0x3DF
 };
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -405,7 +405,10 @@ static const char *vgacon_startup(void)
 		vga_video_port_val = VGA_CRT_DM;
 		if ((screen_info.orig_video_ega_bx & 0xff) != 0x10) {
 			static struct resource ega_console_resource =
-			    { .name = "ega", .start = 0x3B0, .end = 0x3BF };
+			    { .name	= "ega",
+			      .flags	= IORESOURCE_IO,
+			      .start	= 0x3B0,
+			      .end	= 0x3BF };
 			vga_video_type = VIDEO_TYPE_EGAM;
 			vga_vram_size = 0x8000;
 			display_desc = "EGA+";
@@ -413,9 +416,15 @@ static const char *vgacon_startup(void)
 					 &ega_console_resource);
 		} else {
 			static struct resource mda1_console_resource =
-			    { .name = "mda", .start = 0x3B0, .end = 0x3BB };
+			    { .name	= "mda",
+			      .flags	= IORESOURCE_IO,
+			      .start	= 0x3B0,
+			      .end	= 0x3BB };
 			static struct resource mda2_console_resource =
-			    { .name = "mda", .start = 0x3BF, .end = 0x3BF };
+			    { .name	= "mda",
+			      .flags	= IORESOURCE_IO,
+			      .start	= 0x3BF,
+			      .end	= 0x3BF };
 			vga_video_type = VIDEO_TYPE_MDA;
 			vga_vram_size = 0x2000;
 			display_desc = "*MDA";
@@ -437,15 +446,21 @@ static const char *vgacon_startup(void)
 			vga_vram_size = 0x8000;
 
 			if (!screen_info.orig_video_isVGA) {
-				static struct resource ega_console_resource
-				    = { .name = "ega", .start = 0x3C0, .end = 0x3DF };
+				static struct resource ega_console_resource =
+				    { .name	= "ega",
+				      .flags	= IORESOURCE_IO,
+				      .start	= 0x3C0,
+				      .end	= 0x3DF };
 				vga_video_type = VIDEO_TYPE_EGAC;
 				display_desc = "EGA";
 				request_resource(&ioport_resource,
 						 &ega_console_resource);
 			} else {
-				static struct resource vga_console_resource
-				    = { .name = "vga+", .start = 0x3C0, .end = 0x3DF };
+				static struct resource vga_console_resource =
+				    { .name	= "vga+",
+				      .flags	= IORESOURCE_IO,
+				      .start	= 0x3C0,
+				      .end	= 0x3DF };
 				vga_video_type = VIDEO_TYPE_VGAC;
 				display_desc = "VGA+";
 				request_resource(&ioport_resource,
@@ -489,7 +504,10 @@ static const char *vgacon_startup(void)
 			}
 		} else {
 			static struct resource cga_console_resource =
-			    { .name = "cga", .start = 0x3D4, .end = 0x3D5 };
+			    { .name	= "cga",
+			      .flags	= IORESOURCE_IO,
+			      .start	= 0x3D4,
+			      .end	= 0x3D5 };
 			vga_video_type = VIDEO_TYPE_CGA;
 			vga_vram_size = 0x2000;
 			display_desc = "*CGA";

[PATCH 4.9 157/177] omapdrm: panel: fix compatible vendor string for td028ttec1

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "H. Nikolaus Schaller" <hns@goldelico.com>


[ Upstream commit c1b9d4c75cd549e08bd0596d7f9dcc20f7f6e8fa ]

The vendor name was "toppoly" but other panels and the vendor list
have defined it as "tpo". So let's fix it in driver and bindings.

We keep the old definition in parallel to stay compatible with
potential older DTB setup.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt |   30 ----------
 Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt     |   30 ++++++++++
 drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c                |    3 +
 drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c       |    3 +
 4 files changed, 36 insertions(+), 30 deletions(-)
 rename Documentation/devicetree/bindings/display/panel/{toppoly,td028ttec1.txt => tpo,td028ttec1.txt} (84%)

--- a/Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Toppoly TD028TTEC1 Panel
-========================
-
-Required properties:
-- compatible: "toppoly,td028ttec1"
-
-Optional properties:
-- label: a symbolic name for the panel
-
-Required nodes:
-- Video port for DPI input
-
-Example
--------
-
-lcd-panel: td028ttec1@0 {
-	compatible = "toppoly,td028ttec1";
-	reg = <0>;
-	spi-max-frequency = <100000>;
-	spi-cpol;
-	spi-cpha;
-
-	label = "lcd";
-	port {
-		lcd_in: endpoint {
-			remote-endpoint = <&dpi_out>;
-		};
-	};
-};
-
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/tpo,td028ttec1.txt
@@ -0,0 +1,30 @@
+Toppoly TD028TTEC1 Panel
+========================
+
+Required properties:
+- compatible: "tpo,td028ttec1"
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: td028ttec1@0 {
+	compatible = "tpo,td028ttec1";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	label = "lcd";
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
+
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
@@ -456,6 +456,8 @@ static int td028ttec1_panel_remove(struc
 }
 
 static const struct of_device_id td028ttec1_of_match[] = {
+	{ .compatible = "omapdss,tpo,td028ttec1", },
+	/* keep to not break older DTB */
 	{ .compatible = "omapdss,toppoly,td028ttec1", },
 	{},
 };
@@ -475,6 +477,7 @@ static struct spi_driver td028ttec1_spi_
 
 module_spi_driver(td028ttec1_spi_driver);
 
+MODULE_ALIAS("spi:tpo,td028ttec1");
 MODULE_ALIAS("spi:toppoly,td028ttec1");
 MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
 MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
--- a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
@@ -455,6 +455,8 @@ static int td028ttec1_panel_remove(struc
 }
 
 static const struct of_device_id td028ttec1_of_match[] = {
+	{ .compatible = "omapdss,tpo,td028ttec1", },
+	/* keep to not break older DTB */
 	{ .compatible = "omapdss,toppoly,td028ttec1", },
 	{},
 };
@@ -474,6 +476,7 @@ static struct spi_driver td028ttec1_spi_
 
 module_spi_driver(td028ttec1_spi_driver);
 
+MODULE_ALIAS("spi:tpo,td028ttec1");
 MODULE_ALIAS("spi:toppoly,td028ttec1");
 MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
 MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");

[PATCH 4.9 158/177] drm/omap: DMM: Check for DMM readiness after successful transaction commit

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Ujfalusi <peter.ujfalusi@ti.com>


[ Upstream commit b7ea6b286c4051e043f691781785e3c4672f014a ]

Check the status of the DMM engine after it is reported that the
transaction was completed as in rare cases the engine might not reached a
working state.

The wait_status() will print information in case the DMM is not reached the
expected state and the dmm_txn_commit() will return with an error code to
make sure that we are not continuing with a broken setup.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
+++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
@@ -298,7 +298,12 @@ static int dmm_txn_commit(struct dmm_txn
 				msecs_to_jiffies(100))) {
 			dev_err(dmm->dev, "timed out waiting for done\n");
 			ret = -ETIMEDOUT;
+			goto cleanup;
 		}
+
+		/* Check the engine status before continue */
+		ret = wait_status(engine, DMM_PATSTATUS_READY |
+				  DMM_PATSTATUS_VALID | DMM_PATSTATUS_DONE);
 	}
 
 cleanup:

[PATCH 4.9 159/177] pty: cancel pty slave port bufs work in tty_release

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sahara <keun-o.park@darkmatter.ae>


[ Upstream commit 2b022ab7542df60021ab57854b3faaaf42552eaf ]

In case that CONFIG_SLUB_DEBUG is on and pty is used, races between
release_one_tty and flush_to_ldisc work threads may happen and lead
to use-after-free condition on tty->link->port. Because SLUB_DEBUG
is turned on, freed tty->link->port is filled with POISON_FREE value.
So far without SLUB_DEBUG, port was filled with zero and flush_to_ldisc
could return without a problem by checking if tty is NULL.

CPU 0                                 CPU 1
-----                                 -----
release_tty                           pty_write
   cancel_work_sync(tty)                 to = tty->link
   tty_kref_put(tty->link)               tty_schedule_flip(to->port)
      << workqueue >>                 ...
      release_one_tty                 ...
         pty_cleanup                  ...
            kfree(tty->link->port)       << workqueue >>
                                         flush_to_ldisc
                                            tty = READ_ONCE(port->itty)
                                            tty is 0x6b6b6b6b6b6b6b6b
                                            !!PANIC!! access tty->ldisc

 Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b93
 pgd = ffffffc0eb1c3000
 [6b6b6b6b6b6b6b93] *pgd=0000000000000000, *pud=0000000000000000
 ------------[ cut here ]------------
 Kernel BUG at ffffff800851154c [verbose debug info unavailable]
 Internal error: Oops - BUG: 96000004 [#1] PREEMPT SMP
 CPU: 3 PID: 265 Comm: kworker/u8:9 Tainted: G        W 3.18.31-g0a58eeb #1
 Hardware name: Qualcomm Technologies, Inc. MSM 8996pro v1.1 + PMI8996 Carbide (DT)
 Workqueue: events_unbound flush_to_ldisc
 task: ffffffc0ed610ec0 ti: ffffffc0ed624000 task.ti: ffffffc0ed624000
 PC is at ldsem_down_read_trylock+0x0/0x4c
 LR is at tty_ldisc_ref+0x24/0x4c
 pc : [<ffffff800851154c>] lr : [<ffffff800850f6c0>] pstate: 80400145
 sp : ffffffc0ed627cd0
 x29: ffffffc0ed627cd0 x28: 0000000000000000
 x27: ffffff8009e05000 x26: ffffffc0d382cfa0
 x25: 0000000000000000 x24: ffffff800a012f08
 x23: 0000000000000000 x22: ffffffc0703fbc88
 x21: 6b6b6b6b6b6b6b6b x20: 6b6b6b6b6b6b6b93
 x19: 0000000000000000 x18: 0000000000000001
 x17: 00e80000f80d6f53 x16: 0000000000000001
 x15: 0000007f7d826fff x14: 00000000000000a0
 x13: 0000000000000000 x12: 0000000000000109
 x11: 0000000000000000 x10: 0000000000000000
 x9 : ffffffc0ed624000 x8 : ffffffc0ed611580
 x7 : 0000000000000000 x6 : ffffff800a42e000
 x5 : 00000000000003fc x4 : 0000000003bd1201
 x3 : 0000000000000001 x2 : 0000000000000001
 x1 : ffffff800851004c x0 : 6b6b6b6b6b6b6b93

Signed-off-by: Sahara <keun-o.park@darkmatter.ae>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/tty_io.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1702,6 +1702,8 @@ static void release_tty(struct tty_struc
 	if (tty->link)
 		tty->link->port->itty = NULL;
 	tty_buffer_cancel_work(tty->port);
+	if (tty->link)
+		tty_buffer_cancel_work(tty->link->port);
 
 	tty_kref_put(tty->link);
 	tty_kref_put(tty);

[PATCH 4.9 160/177] coresight: Fix disabling of CoreSight TPIU

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robert Walker <robert.walker@arm.com>


[ Upstream commit 11595db8e17faaa05fadc25746c870e31276962f ]

The CoreSight TPIU should be disabled when tracing to other sinks to allow
them to operate at full bandwidth.

This patch fixes tpiu_disable_hw() to correctly disable the TPIU by
configuring the TPIU to stop on flush, initiating a manual flush, waiting
for the flush to complete and then waits for the TPIU to indicate it has
stopped.

Signed-off-by: Robert Walker <robert.walker@arm.com>
Tested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwtracing/coresight/coresight-tpiu.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

--- a/drivers/hwtracing/coresight/coresight-tpiu.c
+++ b/drivers/hwtracing/coresight/coresight-tpiu.c
@@ -46,8 +46,11 @@
 #define TPIU_ITATBCTR0		0xef8
 
 /** register definition **/
+/* FFSR - 0x300 */
+#define FFSR_FT_STOPPED		BIT(1)
 /* FFCR - 0x304 */
 #define FFCR_FON_MAN		BIT(6)
+#define FFCR_STOP_FI		BIT(12)
 
 /**
  * @base:	memory mapped base address for this component.
@@ -85,10 +88,14 @@ static void tpiu_disable_hw(struct tpiu_
 {
 	CS_UNLOCK(drvdata->base);
 
-	/* Clear formatter controle reg. */
-	writel_relaxed(0x0, drvdata->base + TPIU_FFCR);
+	/* Clear formatter and stop on flush */
+	writel_relaxed(FFCR_STOP_FI, drvdata->base + TPIU_FFCR);
 	/* Generate manual flush */
-	writel_relaxed(FFCR_FON_MAN, drvdata->base + TPIU_FFCR);
+	writel_relaxed(FFCR_STOP_FI | FFCR_FON_MAN, drvdata->base + TPIU_FFCR);
+	/* Wait for flush to complete */
+	coresight_timeout(drvdata->base, TPIU_FFCR, FFCR_FON_MAN, 0);
+	/* Wait for formatter to stop */
+	coresight_timeout(drvdata->base, TPIU_FFSR, FFSR_FT_STOPPED, 1);
 
 	CS_LOCK(drvdata->base);
 }

[PATCH 4.9 161/177] pinctrl: Really force states during suspend/resume

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Fainelli <f.fainelli@gmail.com>


[ Upstream commit 981ed1bfbc6c4660b2ddaa8392893e20a6255048 ]

In case a platform only defaults a "default" set of pins, but not a
"sleep" set of pins, and this particular platform suspends and resumes
in a way that the pin states are not preserved by the hardware, when we
resume, we would call pinctrl_single_resume() -> pinctrl_force_default()
-> pinctrl_select_state() and the first thing we do is check that the
pins state is the same as before, and do nothing.

In order to fix this, decouple the actual state change from
pinctrl_select_state() and move it pinctrl_commit_state(), while keeping
the p->state == state check in pinctrl_select_state() not to change the
caller assumptions. pinctrl_force_sleep() and pinctrl_force_default()
are updated to bypass the state check by calling pinctrl_commit_state().

[Linus Walleij]
The forced pin control states are currently only used in some pin
controller drivers that grab their own reference to their own pins.
This is equal to the pin control hogs: pins taken by pin control
devices since there are no corresponding device in the Linux device
hierarchy, such as memory controller lines or unused GPIO lines,
or GPIO lines that are used orthogonally from the GPIO subsystem
but pincontrol-wise managed as hogs (non-strict mode, allowing
simultaneous use by GPIO and pin control). For this case forcing
the state from the drivers' suspend()/resume() callbacks makes
sense and should semantically match the name of the function.

Fixes: 6e5e959dde0d ("pinctrl: API changes to support multiple states per device")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/core.c |   24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -992,19 +992,16 @@ struct pinctrl_state *pinctrl_lookup_sta
 EXPORT_SYMBOL_GPL(pinctrl_lookup_state);
 
 /**
- * pinctrl_select_state() - select/activate/program a pinctrl state to HW
+ * pinctrl_commit_state() - select/activate/program a pinctrl state to HW
  * @p: the pinctrl handle for the device that requests configuration
  * @state: the state handle to select/activate/program
  */
-int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *state)
+static int pinctrl_commit_state(struct pinctrl *p, struct pinctrl_state *state)
 {
 	struct pinctrl_setting *setting, *setting2;
 	struct pinctrl_state *old_state = p->state;
 	int ret;
 
-	if (p->state == state)
-		return 0;
-
 	if (p->state) {
 		/*
 		 * For each pinmux setting in the old state, forget SW's record
@@ -1068,6 +1065,19 @@ unapply_new_state:
 
 	return ret;
 }
+
+/**
+ * pinctrl_select_state() - select/activate/program a pinctrl state to HW
+ * @p: the pinctrl handle for the device that requests configuration
+ * @state: the state handle to select/activate/program
+ */
+int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *state)
+{
+	if (p->state == state)
+		return 0;
+
+	return pinctrl_commit_state(p, state);
+}
 EXPORT_SYMBOL_GPL(pinctrl_select_state);
 
 static void devm_pinctrl_release(struct device *dev, void *res)
@@ -1236,7 +1246,7 @@ void pinctrl_unregister_map(struct pinct
 int pinctrl_force_sleep(struct pinctrl_dev *pctldev)
 {
 	if (!IS_ERR(pctldev->p) && !IS_ERR(pctldev->hog_sleep))
-		return pinctrl_select_state(pctldev->p, pctldev->hog_sleep);
+		return pinctrl_commit_state(pctldev->p, pctldev->hog_sleep);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(pinctrl_force_sleep);
@@ -1248,7 +1258,7 @@ EXPORT_SYMBOL_GPL(pinctrl_force_sleep);
 int pinctrl_force_default(struct pinctrl_dev *pctldev)
 {
 	if (!IS_ERR(pctldev->p) && !IS_ERR(pctldev->hog_default))
-		return pinctrl_select_state(pctldev->p, pctldev->hog_default);
+		return pinctrl_commit_state(pctldev->p, pctldev->hog_default);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(pinctrl_force_default);

[PATCH 4.9 162/177] pinctrl: rockchip: enable clock when reading pin direction register

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian Norris <briannorris@chromium.org>


[ Upstream commit 5c9d8c4f6b8168738a26bcf288516cc3a0886810 ]

We generally leave the GPIO clock disabled, unless an interrupt is
requested or we're accessing IO registers. We forgot to do this for the
->get_direction() callback, which means we can sometimes [1] get
incorrect results [2] from, e.g., /sys/kernel/debug/gpio.

Enable the clock, so we get the right results!

[1] Sometimes, because many systems have 1 or mor interrupt requested on
each GPIO bank, so they always leave their clock on.

[2] Incorrect, meaning the register returns 0, and so we interpret that
as "input".

Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/pinctrl-rockchip.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -1278,8 +1278,16 @@ static int rockchip_gpio_get_direction(s
 {
 	struct rockchip_pin_bank *bank = gpiochip_get_data(chip);
 	u32 data;
+	int ret;
 
+	ret = clk_enable(bank->clk);
+	if (ret < 0) {
+		dev_err(bank->drvdata->dev,
+			"failed to enable clock for bank %s\n", bank->name);
+		return ret;
+	}
 	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
+	clk_disable(bank->clk);
 
 	return !(data & BIT(offset));
 }

[PATCH 4.9 163/177] iommu/vt-d: clean up pr_irq if request_threaded_irq fails

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerry Snitselaar <jsnitsel@redhat.com>


[ Upstream commit 72d548113881dd32bf7f0b221d031e6586468437 ]

It is unlikely request_threaded_irq will fail, but if it does for some
reason we should clear iommu->pr_irq in the error path. Also
intel_svm_finish_prq shouldn't try to clean up the page request
interrupt if pr_irq is 0. Without these, if request_threaded_irq were
to fail the following occurs:

fail with no fixes:

[    0.683147] ------------[ cut here ]------------
[    0.683148] NULL pointer, cannot free irq
[    0.683158] WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:1632 irq_domain_free_irqs+0x126/0x140
[    0.683160] Modules linked in:
[    0.683163] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #3
[    0.683165] Hardware name:                  /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017
[    0.683168] RIP: 0010:irq_domain_free_irqs+0x126/0x140
[    0.683169] RSP: 0000:ffffc90000037ce8 EFLAGS: 00010292
[    0.683171] RAX: 000000000000001d RBX: ffff880276283c00 RCX: ffffffff81c5e5e8
[    0.683172] RDX: 0000000000000001 RSI: 0000000000000096 RDI: 0000000000000246
[    0.683174] RBP: ffff880276283c00 R08: 0000000000000000 R09: 000000000000023c
[    0.683175] R10: 0000000000000007 R11: 0000000000000000 R12: 000000000000007a
[    0.683176] R13: 0000000000000001 R14: 0000000000000000 R15: 0000010010000000
[    0.683178] FS:  0000000000000000(0000) GS:ffff88027ec80000(0000) knlGS:0000000000000000
[    0.683180] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.683181] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0
[    0.683182] Call Trace:
[    0.683189]  intel_svm_finish_prq+0x3c/0x60
[    0.683191]  free_dmar_iommu+0x1ac/0x1b0
[    0.683195]  init_dmars+0xaaa/0xaea
[    0.683200]  ? klist_next+0x19/0xc0
[    0.683203]  ? pci_do_find_bus+0x50/0x50
[    0.683205]  ? pci_get_dev_by_id+0x52/0x70
[    0.683208]  intel_iommu_init+0x498/0x5c7
[    0.683211]  pci_iommu_init+0x13/0x3c
[    0.683214]  ? e820__memblock_setup+0x61/0x61
[    0.683217]  do_one_initcall+0x4d/0x1a0
[    0.683220]  kernel_init_freeable+0x186/0x20e
[    0.683222]  ? set_debug_rodata+0x11/0x11
[    0.683225]  ? rest_init+0xb0/0xb0
[    0.683226]  kernel_init+0xa/0xff
[    0.683229]  ret_from_fork+0x1f/0x30
[    0.683259] Code: 89 ee 44 89 e7 e8 3b e8 ff ff 5b 5d 44 89 e7 44 89 ee 41 5c 41 5d 41 5e e9 a8 84 ff ff 48 c7 c7 a8 71 a7 81 31 c0 e8 6a d3 f9 ff <0f> ff 5b 5d 41 5c 41 5d 41 5
e c3 0f 1f 44 00 00 66 2e 0f 1f 84
[    0.683285] ---[ end trace f7650e42792627ca ]---

with iommu->pr_irq = 0, but no check in intel_svm_finish_prq:

[    0.669561] ------------[ cut here ]------------
[    0.669563] Trying to free already-free IRQ 0
[    0.669573] WARNING: CPU: 3 PID: 1 at kernel/irq/manage.c:1546 __free_irq+0xa4/0x2c0
[    0.669574] Modules linked in:
[    0.669577] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #4
[    0.669579] Hardware name:                  /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017
[    0.669581] RIP: 0010:__free_irq+0xa4/0x2c0
[    0.669582] RSP: 0000:ffffc90000037cc0 EFLAGS: 00010082
[    0.669584] RAX: 0000000000000021 RBX: 0000000000000000 RCX: ffffffff81c5e5e8
[    0.669585] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000046
[    0.669587] RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000023c
[    0.669588] R10: 0000000000000007 R11: 0000000000000000 R12: ffff880276253960
[    0.669589] R13: ffff8802762538a4 R14: ffff880276253800 R15: ffff880276283600
[    0.669593] FS:  0000000000000000(0000) GS:ffff88027ed80000(0000) knlGS:0000000000000000
[    0.669594] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    0.669596] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0
[    0.669602] Call Trace:
[    0.669616]  free_irq+0x30/0x60
[    0.669620]  intel_svm_finish_prq+0x34/0x60
[    0.669623]  free_dmar_iommu+0x1ac/0x1b0
[    0.669627]  init_dmars+0xaaa/0xaea
[    0.669631]  ? klist_next+0x19/0xc0
[    0.669634]  ? pci_do_find_bus+0x50/0x50
[    0.669637]  ? pci_get_dev_by_id+0x52/0x70
[    0.669639]  intel_iommu_init+0x498/0x5c7
[    0.669642]  pci_iommu_init+0x13/0x3c
[    0.669645]  ? e820__memblock_setup+0x61/0x61
[    0.669648]  do_one_initcall+0x4d/0x1a0
[    0.669651]  kernel_init_freeable+0x186/0x20e
[    0.669653]  ? set_debug_rodata+0x11/0x11
[    0.669656]  ? rest_init+0xb0/0xb0
[    0.669658]  kernel_init+0xa/0xff
[    0.669661]  ret_from_fork+0x1f/0x30
[    0.669662] Code: 7a 08 75 0e e9 c3 01 00 00 4c 39 7b 08 74 57 48 89 da 48 8b 5a 18 48 85 db 75 ee 89 ee 48 c7 c7 78 67 a7 81 31 c0 e8 4c 37 fa ff <0f> ff 48 8b 34 24 4c 89 ef e
8 0e 4c 68 00 49 8b 46 40 48 8b 80
[    0.669688] ---[ end trace 58a470248700f2fc ]---

Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/intel-svm.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/iommu/intel-svm.c
+++ b/drivers/iommu/intel-svm.c
@@ -127,6 +127,7 @@ int intel_svm_enable_prq(struct intel_io
 		pr_err("IOMMU: %s: Failed to request IRQ for page request queue\n",
 		       iommu->name);
 		dmar_free_hwirq(irq);
+		iommu->pr_irq = 0;
 		goto err;
 	}
 	dmar_writeq(iommu->reg + DMAR_PQH_REG, 0ULL);
@@ -142,9 +143,11 @@ int intel_svm_finish_prq(struct intel_io
 	dmar_writeq(iommu->reg + DMAR_PQT_REG, 0ULL);
 	dmar_writeq(iommu->reg + DMAR_PQA_REG, 0ULL);
 
-	free_irq(iommu->pr_irq, iommu);
-	dmar_free_hwirq(iommu->pr_irq);
-	iommu->pr_irq = 0;
+	if (iommu->pr_irq) {
+		free_irq(iommu->pr_irq, iommu);
+		dmar_free_hwirq(iommu->pr_irq);
+		iommu->pr_irq = 0;
+	}
 
 	free_pages((unsigned long)iommu->prq, PRQ_ORDER);
 	iommu->prq = NULL;

[PATCH 4.9 164/177] ip6_vti: adjust vti mtu according to mtu of lower device

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Kodanev <alexey.kodanev@oracle.com>


[ Upstream commit 53c81e95df1793933f87748d36070a721f6cb287 ]

LTP/udp6_ipsec_vti tests fail when sending large UDP datagrams over
ip6_vti that require fragmentation and the underlying device has an
MTU smaller than 1500 plus some extra space for headers. This happens
because ip6_vti, by default, sets MTU to ETH_DATA_LEN and not updating
it depending on a destination address or link parameter. Further
attempts to send UDP packets may succeed because pmtu gets updated on
ICMPV6_PKT_TOOBIG in vti6_err().

In case the lower device has larger MTU size, e.g. 9000, ip6_vti works
but not using the possible maximum size, output packets have 1500 limit.

The above cases require manual MTU setup after ip6_vti creation. However
ip_vti already updates MTU based on lower device with ip_tunnel_bind_dev().

Here is the example when the lower device MTU is set to 9000:

  # ip a sh ltp_ns_veth2
      ltp_ns_veth2@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 ...
        inet 10.0.0.2/24 scope global ltp_ns_veth2
        inet6 fd00::2/64 scope global

  # ip li add vti6 type vti6 local fd00::2 remote fd00::1
  # ip li show vti6
      vti6@NONE: <POINTOPOINT,NOARP> mtu 1500 ...
        link/tunnel6 fd00::2 peer fd00::1

After the patch:
  # ip li add vti6 type vti6 local fd00::2 remote fd00::1
  # ip li show vti6
      vti6@NONE: <POINTOPOINT,NOARP> mtu 8832 ...
        link/tunnel6 fd00::2 peer fd00::1

Reported-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_vti.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -625,6 +625,7 @@ static void vti6_link_config(struct ip6_
 {
 	struct net_device *dev = t->dev;
 	struct __ip6_tnl_parm *p = &t->parms;
+	struct net_device *tdev = NULL;
 
 	memcpy(dev->dev_addr, &p->laddr, sizeof(struct in6_addr));
 	memcpy(dev->broadcast, &p->raddr, sizeof(struct in6_addr));
@@ -637,6 +638,25 @@ static void vti6_link_config(struct ip6_
 		dev->flags |= IFF_POINTOPOINT;
 	else
 		dev->flags &= ~IFF_POINTOPOINT;
+
+	if (p->flags & IP6_TNL_F_CAP_XMIT) {
+		int strict = (ipv6_addr_type(&p->raddr) &
+			      (IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL));
+		struct rt6_info *rt = rt6_lookup(t->net,
+						 &p->raddr, &p->laddr,
+						 p->link, strict);
+
+		if (rt)
+			tdev = rt->dst.dev;
+		ip6_rt_put(rt);
+	}
+
+	if (!tdev && p->link)
+		tdev = __dev_get_by_index(t->net, p->link);
+
+	if (tdev)
+		dev->mtu = max_t(int, tdev->mtu - dev->hard_header_len,
+				 IPV6_MIN_MTU);
 }
 
 /**

[PATCH 4.9 165/177] RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Anton Vasilyev <vasilyev@ispras.ru>


[ Upstream commit 744820869166c8c78be891240cf5f66e8a333694 ]

Debugfs file reset_stats is created with S_IRUSR permissions,
but ocrdma_dbgfs_ops_read() doesn't support OCRDMA_RESET_STATS,
whereas ocrdma_dbgfs_ops_write() supports only OCRDMA_RESET_STATS.

The patch fixes misstype with permissions.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/infiniband/hw/ocrdma/ocrdma_stats.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/hw/ocrdma/ocrdma_stats.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_stats.c
@@ -836,7 +836,7 @@ void ocrdma_add_port_stats(struct ocrdma
 
 	dev->reset_stats.type = OCRDMA_RESET_STATS;
 	dev->reset_stats.dev = dev;
-	if (!debugfs_create_file("reset_stats", S_IRUSR, dev->dir,
+	if (!debugfs_create_file("reset_stats", 0200, dev->dir,
 				&dev->reset_stats, &ocrdma_dbg_ops))
 		goto err;
 

[PATCH 4.9 166/177] ARM: dts: aspeed-evb: Add unit name to memory node

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joel Stanley <joel@jms.id.au>


[ Upstream commit e40ed274489a5f516da120186578eb379b452ac6 ]

Fixes a warning when building with W=1.

All of the ASPEED device trees build without warnings now.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/aspeed-ast2500-evb.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -15,7 +15,7 @@
 		bootargs = "console=ttyS4,115200 earlyprintk";
 	};
 
-	memory {
+	memory@80000000 {
 		reg = <0x80000000 0x20000000>;
 	};
 };

[PATCH 4.9 167/177] nfsd4: permit layoutget of executable-only files

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Coddington <bcodding@redhat.com>


[ Upstream commit 66282ec1cf004c09083c29cb5e49019037937bbd ]

Clients must be able to read a file in order to execute it, and for pNFS
that means the client needs to be able to perform a LAYOUTGET on the file.

This behavior for executable-only files was added for OPEN in commit
a043226bc140 "nfsd4: permit read opens of executable-only files".

This fixes up xfstests generic/126 on block/scsi layouts.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfsd/nfs4proc.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1338,14 +1338,14 @@ nfsd4_layoutget(struct svc_rqst *rqstp,
 	const struct nfsd4_layout_ops *ops;
 	struct nfs4_layout_stateid *ls;
 	__be32 nfserr;
-	int accmode;
+	int accmode = NFSD_MAY_READ_IF_EXEC;
 
 	switch (lgp->lg_seg.iomode) {
 	case IOMODE_READ:
-		accmode = NFSD_MAY_READ;
+		accmode |= NFSD_MAY_READ;
 		break;
 	case IOMODE_RW:
-		accmode = NFSD_MAY_READ | NFSD_MAY_WRITE;
+		accmode |= NFSD_MAY_READ | NFSD_MAY_WRITE;
 		break;
 	default:
 		dprintk("%s: invalid iomode %d\n",

[PATCH 4.9 168/177] clk: Dont touch hardware when reparenting during registration

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <sboyd@codeaurora.org>


[ Upstream commit f8f8f1d04494d3a6546bee3f0618c4dba31d7b72 ]

The orphan clocks reparent operation shouldn't touch the hardware
if clocks are enabled, otherwise it may get a chance to disable a
newly registered critical clock which triggers the warning below.

Assuming we have two clocks: A and B, B is the parent of A.
Clock A has flag: CLK_OPS_PARENT_ENABLE
Clock B has flag: CLK_IS_CRITICAL

Step 1:
Clock A is registered, then it becomes orphan.

Step 2:
Clock B is registered. Before clock B reach the critical clock enable
operation, orphan A will find the newly registered parent B and do
reparent operation, then parent B will be finally disabled in
__clk_set_parent_after() due to CLK_OPS_PARENT_ENABLE flag as there's
still no users of B which will then trigger the following warning.

WARNING: CPU: 0 PID: 0 at drivers/clk/clk.c:597 clk_core_disable+0xb4/0xe0
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc1-00056-gdff1f66-dirty #1373
Hardware name: Generic DT based system
Backtrace:
[<c010c4bc>] (dump_backtrace) from [<c010c764>] (show_stack+0x18/0x1c)
 r6:600000d3 r5:00000000 r4:c0e26358 r3:00000000
[<c010c74c>] (show_stack) from [<c040599c>] (dump_stack+0xb4/0xe8)
[<c04058e8>] (dump_stack) from [<c0125c94>] (__warn+0xd8/0x104)
 r10:c0c21cd0 r9:c048aa78 r8:00000255 r7:00000009 r6:c0c1cd90 r5:00000000
 r4:00000000 r3:c0e01d34
[<c0125bbc>] (__warn) from [<c0125d74>] (warn_slowpath_null+0x28/0x30)
 r9:00000000 r8:ef00bf80 r7:c165ac4c r6:ef00bf80 r5:ef00bf80 r4:ef00bf80
[<c0125d4c>] (warn_slowpath_null) from [<c048aa78>] (clk_core_disable+0xb4/0xe0)
[<c048a9c4>] (clk_core_disable) from [<c048be88>] (clk_core_disable_lock+0x20/0x2c)
 r4:000000d3 r3:c0e0af00
[<c048be68>] (clk_core_disable_lock) from [<c048c224>] (clk_core_disable_unprepare+0x14/0x28)
 r5:00000000 r4:ef00bf80
[<c048c210>] (clk_core_disable_unprepare) from [<c048c270>] (__clk_set_parent_after+0x38/0x54)
 r4:ef00bd80 r3:000010a0
[<c048c238>] (__clk_set_parent_after) from [<c048daa8>] (clk_register+0x4d0/0x648)
 r6:ef00d500 r5:ef00bf80 r4:ef00bd80 r3:ef00bfd4
[<c048d5d8>] (clk_register) from [<c048dc30>] (clk_hw_register+0x10/0x1c)
 r9:00000000 r8:00000003 r7:00000000 r6:00000824 r5:00000001 r4:ef00d500
[<c048dc20>] (clk_hw_register) from [<c048e698>] (_register_divider+0xcc/0x120)
[<c048e5cc>] (_register_divider) from [<c048e730>] (clk_register_divider+0x44/0x54)
 r10:00000004 r9:00000003 r8:00000001 r7:00000000 r6:00000003 r5:00000001
 r4:f0810030
[<c048e6ec>] (clk_register_divider) from [<c0d3ff58>] (imx7ulp_clocks_init+0x558/0xe98)
 r7:c0e296f8 r6:c165c808 r5:00000000 r4:c165c808
[<c0d3fa00>] (imx7ulp_clocks_init) from [<c0d24db0>] (of_clk_init+0x118/0x1e0)
 r10:00000001 r9:c0e01f68 r8:00000000 r7:c0e01f60 r6:ef7f8974 r5:ef0035c0
 r4:00000006
[<c0d24c98>] (of_clk_init) from [<c0d04a50>] (time_init+0x2c/0x38)
 r10:efffed40 r9:c0d61a48 r8:c0e78000 r7:c0e07900 r6:ffffffff r5:c0e78000
 r4:00000000
[<c0d04a24>] (time_init) from [<c0d00b8c>] (start_kernel+0x218/0x394)
[<c0d00974>] (start_kernel) from [<6000807c>] (0x6000807c)
 r10:00000000 r9:410fc075 r8:6000406a r7:c0e0c930 r6:c0d61a44 r5:c0e07918
 r4:c0e78294

We know that the clk isn't enabled with any sort of prepare_count
here so we don't need to enable anything to prevent a race. And
we're holding the prepare mutex so set_rate/set_parent can't race
here either. Based on an earlier patch by Dong Aisheng.

Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)")
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Reported-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/clk.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2443,14 +2443,17 @@ static int __clk_core_init(struct clk_co
 	 */
 	hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
 		struct clk_core *parent = __clk_init_parent(orphan);
+		unsigned long flags;
 
 		/*
 		 * we could call __clk_set_parent, but that would result in a
 		 * redundant call to the .set_rate op, if it exists
 		 */
 		if (parent) {
-			__clk_set_parent_before(orphan, parent);
-			__clk_set_parent_after(orphan, parent, NULL);
+			/* update the clk tree topology */
+			flags = clk_enable_lock();
+			clk_reparent(orphan, parent);
+			clk_enable_unlock(flags);
 			__clk_recalc_accuracies(orphan);
 			__clk_recalc_rates(orphan, 0);
 		}

[PATCH 4.9 169/177] clk: axi-clkgen: Correctly handle nocount bit in recalc_rate()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lars-Peter Clausen <lars@metafoo.de>


[ Upstream commit 063578dc5f407f67d149133818efabe457daafda ]

If the nocount bit is set the divider is bypassed and the settings for the
divider count should be ignored and a divider value of 1 should be assumed.
Handle this correctly in the driver recalc_rate() callback.

While the driver sets up the part so that the read back dividers values
yield the correct result the power-on reset settings of the part might not
reflect this and hence calling e.g. clk_get_rate() without prior calls to
clk_set_rate() will yield the wrong result.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/clk-axi-clkgen.c |   29 ++++++++++++++++++++++++-----
 1 file changed, 24 insertions(+), 5 deletions(-)

--- a/drivers/clk/clk-axi-clkgen.c
+++ b/drivers/clk/clk-axi-clkgen.c
@@ -40,6 +40,10 @@
 #define MMCM_REG_FILTER1	0x4e
 #define MMCM_REG_FILTER2	0x4f
 
+#define MMCM_CLKOUT_NOCOUNT	BIT(6)
+
+#define MMCM_CLK_DIV_NOCOUNT	BIT(12)
+
 struct axi_clkgen {
 	void __iomem *base;
 	struct clk_hw clk_hw;
@@ -315,12 +319,27 @@ static unsigned long axi_clkgen_recalc_r
 	unsigned int reg;
 	unsigned long long tmp;
 
-	axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLKOUT0_1, &reg);
-	dout = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+	axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLKOUT0_2, &reg);
+	if (reg & MMCM_CLKOUT_NOCOUNT) {
+		dout = 1;
+	} else {
+		axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLKOUT0_1, &reg);
+		dout = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+	}
+
 	axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLK_DIV, &reg);
-	d = (reg & 0x3f) + ((reg >> 6) & 0x3f);
-	axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLK_FB1, &reg);
-	m = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+	if (reg & MMCM_CLK_DIV_NOCOUNT)
+		d = 1;
+	else
+		d = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+
+	axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLK_FB2, &reg);
+	if (reg & MMCM_CLKOUT_NOCOUNT) {
+		m = 1;
+	} else {
+		axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLK_FB1, &reg);
+		m = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+	}
 
 	if (d == 0 || dout == 0)
 		return 0;

[PATCH 4.9 170/177] clk: si5351: Rename internal plls to avoid name collisions

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sergej Sawazki <sergej@taudac.com>


[ Upstream commit cdba9a4fb0b53703959ac861e415816cb61aded4 ]

This drivers probe fails due to a clock name collision if a clock named
'plla' or 'pllb' is already registered when registering this drivers
internal plls.

Fix it by renaming internal plls to avoid name collisions.

Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Sergej Sawazki <sergej@taudac.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/clk-si5351.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/clk/clk-si5351.c
+++ b/drivers/clk/clk-si5351.c
@@ -72,7 +72,7 @@ static const char * const si5351_input_n
 	"xtal", "clkin"
 };
 static const char * const si5351_pll_names[] = {
-	"plla", "pllb", "vxco"
+	"si5351_plla", "si5351_pllb", "si5351_vxco"
 };
 static const char * const si5351_msynth_names[] = {
 	"ms0", "ms1", "ms2", "ms3", "ms4", "ms5", "ms6", "ms7"

[PATCH 4.9 171/177] dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vignesh R <vigneshr@ti.com>


[ Upstream commit d087f15786021a9605b20f4c678312510be4cac1 ]

Register layout of a typical TPCC_EVT_MUX_M_N register is such that the
lowest numbered event is at the lowest byte address and highest numbered
event at highest byte address. But TPCC_EVT_MUX_60_63 register layout is
different,  in that the lowest numbered event is at the highest address
and highest numbered event is at the lowest address. Therefore, modify
ti_am335x_xbar_write() to handle TPCC_EVT_MUX_60_63 register
accordingly.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma/ti-dma-crossbar.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/drivers/dma/ti-dma-crossbar.c
+++ b/drivers/dma/ti-dma-crossbar.c
@@ -54,7 +54,15 @@ struct ti_am335x_xbar_map {
 
 static inline void ti_am335x_xbar_write(void __iomem *iomem, int event, u8 val)
 {
-	writeb_relaxed(val, iomem + event);
+	/*
+	 * TPCC_EVT_MUX_60_63 register layout is different than the
+	 * rest, in the sense, that event 63 is mapped to lowest byte
+	 * and event 60 is mapped to highest, handle it separately.
+	 */
+	if (event >= 60 && event <= 63)
+		writeb_relaxed(val, iomem + (63 - event % 4));
+	else
+		writeb_relaxed(val, iomem + event);
 }
 
 static void ti_am335x_xbar_free(struct device *dev, void *route_data)

[PATCH 4.9 172/177] IB/mlx5: Fix integer overflows in mlx5_ib_create_srq

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boris Pismenny <borisp@mellanox.com>

commit c2b37f76485f073f020e60b5954b6dc4e55f693c upstream.

This patch validates user provided input to prevent integer overflow due
to integer manipulation in the mlx5_ib_create_srq function.

Cc: syzkaller <syzkaller@googlegroups.com>
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx5/srq.c |   15 +++++++++------
 include/linux/mlx5/driver.h      |    4 ++--
 2 files changed, 11 insertions(+), 8 deletions(-)

--- a/drivers/infiniband/hw/mlx5/srq.c
+++ b/drivers/infiniband/hw/mlx5/srq.c
@@ -243,8 +243,8 @@ struct ib_srq *mlx5_ib_create_srq(struct
 {
 	struct mlx5_ib_dev *dev = to_mdev(pd->device);
 	struct mlx5_ib_srq *srq;
-	int desc_size;
-	int buf_size;
+	size_t desc_size;
+	size_t buf_size;
 	int err;
 	struct mlx5_srq_attr in = {0};
 	__u32 max_srq_wqes = 1 << MLX5_CAP_GEN(dev->mdev, log_max_srq_sz);
@@ -268,15 +268,18 @@ struct ib_srq *mlx5_ib_create_srq(struct
 
 	desc_size = sizeof(struct mlx5_wqe_srq_next_seg) +
 		    srq->msrq.max_gs * sizeof(struct mlx5_wqe_data_seg);
+	if (desc_size == 0 || srq->msrq.max_gs > desc_size)
+		return ERR_PTR(-EINVAL);
 	desc_size = roundup_pow_of_two(desc_size);
-	desc_size = max_t(int, 32, desc_size);
+	desc_size = max_t(size_t, 32, desc_size);
+	if (desc_size < sizeof(struct mlx5_wqe_srq_next_seg))
+		return ERR_PTR(-EINVAL);
 	srq->msrq.max_avail_gather = (desc_size - sizeof(struct mlx5_wqe_srq_next_seg)) /
 		sizeof(struct mlx5_wqe_data_seg);
 	srq->msrq.wqe_shift = ilog2(desc_size);
 	buf_size = srq->msrq.max * desc_size;
-	mlx5_ib_dbg(dev, "desc_size 0x%x, req wr 0x%x, srq size 0x%x, max_gs 0x%x, max_avail_gather 0x%x\n",
-		    desc_size, init_attr->attr.max_wr, srq->msrq.max, srq->msrq.max_gs,
-		    srq->msrq.max_avail_gather);
+	if (buf_size < desc_size)
+		return ERR_PTR(-EINVAL);
 	in.type = init_attr->srq_type;
 
 	if (pd->uobject)
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -380,8 +380,8 @@ struct mlx5_core_srq {
 	struct mlx5_core_rsc_common	common; /* must be first */
 	u32		srqn;
 	int		max;
-	int		max_gs;
-	int		max_avail_gather;
+	size_t		max_gs;
+	size_t		max_avail_gather;
 	int		wqe_shift;
 	void (*event)	(struct mlx5_core_srq *, enum mlx5_event);
 

[PATCH 4.9 173/177] IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boris Pismenny <borisp@mellanox.com>

commit 2c292dbb398ee46fc1343daf6c3cf9715a75688e upstream.

Add a check for the length of the qpin structure to prevent out-of-bounds reads

BUG: KASAN: slab-out-of-bounds in create_raw_packet_qp+0x114c/0x15e2
Read of size 8192 at addr ffff880066b99290 by task syz-executor3/549

CPU: 3 PID: 549 Comm: syz-executor3 Not tainted 4.15.0-rc2+ #27 Hardware
name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
 dump_stack+0x8d/0xd4
 print_address_description+0x73/0x290
 kasan_report+0x25c/0x370
 ? create_raw_packet_qp+0x114c/0x15e2
 memcpy+0x1f/0x50
 create_raw_packet_qp+0x114c/0x15e2
 ? create_raw_packet_qp_tis.isra.28+0x13d/0x13d
 ? lock_acquire+0x370/0x370
 create_qp_common+0x2245/0x3b50
 ? destroy_qp_user.isra.47+0x100/0x100
 ? kasan_kmalloc+0x13d/0x170
 ? sched_clock_cpu+0x18/0x180
 ? fs_reclaim_acquire.part.15+0x5/0x30
 ? __lock_acquire+0xa11/0x1da0
 ? sched_clock_cpu+0x18/0x180
 ? kmem_cache_alloc_trace+0x17e/0x310
 ? mlx5_ib_create_qp+0x30e/0x17b0
 mlx5_ib_create_qp+0x33d/0x17b0
 ? sched_clock_cpu+0x18/0x180
 ? create_qp_common+0x3b50/0x3b50
 ? lock_acquire+0x370/0x370
 ? __radix_tree_lookup+0x180/0x220
 ? uverbs_try_lock_object+0x68/0xc0
 ? rdma_lookup_get_uobject+0x114/0x240
 create_qp.isra.5+0xce4/0x1e20
 ? ib_uverbs_ex_create_cq_cb+0xa0/0xa0
 ? copy_ah_attr_from_uverbs.isra.2+0xa00/0xa00
 ? ib_uverbs_cq_event_handler+0x160/0x160
 ? __might_fault+0x17c/0x1c0
 ib_uverbs_create_qp+0x21b/0x2a0
 ? ib_uverbs_destroy_cq+0x2e0/0x2e0
 ib_uverbs_write+0x55a/0xad0
 ? ib_uverbs_destroy_cq+0x2e0/0x2e0
 ? ib_uverbs_destroy_cq+0x2e0/0x2e0
 ? ib_uverbs_open+0x760/0x760
 ? futex_wake+0x147/0x410
 ? check_prev_add+0x1680/0x1680
 ? do_futex+0x3d3/0xa60
 ? sched_clock_cpu+0x18/0x180
 __vfs_write+0xf7/0x5c0
 ? ib_uverbs_open+0x760/0x760
 ? kernel_read+0x110/0x110
 ? lock_acquire+0x370/0x370
 ? __fget+0x264/0x3b0
 vfs_write+0x18a/0x460
 SyS_write+0xc7/0x1a0
 ? SyS_read+0x1a0/0x1a0
 ? trace_hardirqs_on_thunk+0x1a/0x1c
 entry_SYSCALL_64_fastpath+0x18/0x85
RIP: 0033:0x4477b9
RSP: 002b:00007f1822cadc18 EFLAGS: 00000292 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00000000004477b9
RDX: 0000000000000070 RSI: 000000002000a000 RDI: 0000000000000005
RBP: 0000000000708000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000292 R12: 00000000ffffffff
R13: 0000000000005d70 R14: 00000000006e6e30 R15: 0000000020010ff0

Allocated by task 549:
 __kmalloc+0x15e/0x340
 kvmalloc_node+0xa1/0xd0
 create_user_qp.isra.46+0xd42/0x1610
 create_qp_common+0x2e63/0x3b50
 mlx5_ib_create_qp+0x33d/0x17b0
 create_qp.isra.5+0xce4/0x1e20
 ib_uverbs_create_qp+0x21b/0x2a0
 ib_uverbs_write+0x55a/0xad0
 __vfs_write+0xf7/0x5c0
 vfs_write+0x18a/0x460
 SyS_write+0xc7/0x1a0
 entry_SYSCALL_64_fastpath+0x18/0x85

Freed by task 368:
 kfree+0xeb/0x2f0
 kernfs_fop_release+0x140/0x180
 __fput+0x266/0x700
 task_work_run+0x104/0x180
 exit_to_usermode_loop+0xf7/0x110
 syscall_return_slowpath+0x298/0x370
 entry_SYSCALL_64_fastpath+0x83/0x85

The buggy address belongs to the object at ffff880066b99180  which
belongs to the cache kmalloc-512 of size 512 The buggy address is
located 272 bytes inside of  512-byte region [ffff880066b99180,
ffff880066b99380) The buggy address belongs to the page:
page:000000006040eedd count:1 mapcount:0 mapping:          (null)
index:0x0 compound_mapcount: 0
flags: 0x4000000000008100(slab|head)
raw: 4000000000008100 0000000000000000 0000000000000000 0000000180190019
raw: ffffea00019a7500 0000000b0000000b ffff88006c403080 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff880066b99180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff880066b99200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff880066b99280: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                         ^
 ffff880066b99300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff880066b99380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Cc: syzkaller <syzkaller@googlegroups.com>
Fixes: 0fb2ed66a14c ("IB/mlx5: Add create and destroy functionality for Raw Packet QP")
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/mlx5/qp.c |   24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -1130,7 +1130,7 @@ static void destroy_raw_packet_qp_sq(str
 	ib_umem_release(sq->ubuffer.umem);
 }
 
-static int get_rq_pas_size(void *qpc)
+static size_t get_rq_pas_size(void *qpc)
 {
 	u32 log_page_size = MLX5_GET(qpc, qpc, log_page_size) + 12;
 	u32 log_rq_stride = MLX5_GET(qpc, qpc, log_rq_stride);
@@ -1146,7 +1146,8 @@ static int get_rq_pas_size(void *qpc)
 }
 
 static int create_raw_packet_qp_rq(struct mlx5_ib_dev *dev,
-				   struct mlx5_ib_rq *rq, void *qpin)
+				   struct mlx5_ib_rq *rq, void *qpin,
+				   size_t qpinlen)
 {
 	struct mlx5_ib_qp *mqp = rq->base.container_mibqp;
 	__be64 *pas;
@@ -1155,9 +1156,12 @@ static int create_raw_packet_qp_rq(struc
 	void *rqc;
 	void *wq;
 	void *qpc = MLX5_ADDR_OF(create_qp_in, qpin, qpc);
-	int inlen;
+	size_t rq_pas_size = get_rq_pas_size(qpc);
+	size_t inlen;
 	int err;
-	u32 rq_pas_size = get_rq_pas_size(qpc);
+
+	if (qpinlen < rq_pas_size + MLX5_BYTE_OFF(create_qp_in, pas))
+		return -EINVAL;
 
 	inlen = MLX5_ST_SZ_BYTES(create_rq_in) + rq_pas_size;
 	in = mlx5_vzalloc(inlen);
@@ -1235,7 +1239,7 @@ static void destroy_raw_packet_qp_tir(st
 }
 
 static int create_raw_packet_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
-				u32 *in,
+				u32 *in, size_t inlen,
 				struct ib_pd *pd)
 {
 	struct mlx5_ib_raw_packet_qp *raw_packet_qp = &qp->raw_packet_qp;
@@ -1262,7 +1266,7 @@ static int create_raw_packet_qp(struct m
 	if (qp->rq.wqe_cnt) {
 		rq->base.container_mibqp = qp;
 
-		err = create_raw_packet_qp_rq(dev, rq, in);
+		err = create_raw_packet_qp_rq(dev, rq, in, inlen);
 		if (err)
 			goto err_destroy_sq;
 
@@ -1753,10 +1757,15 @@ static int create_qp_common(struct mlx5_
 		qp->flags |= MLX5_IB_QP_LSO;
 	}
 
+	if (inlen < 0) {
+		err = -EINVAL;
+		goto err;
+	}
+
 	if (init_attr->qp_type == IB_QPT_RAW_PACKET) {
 		qp->raw_packet_qp.sq.ubuffer.buf_addr = ucmd.sq_buf_addr;
 		raw_packet_qp_copy_info(qp, &qp->raw_packet_qp);
-		err = create_raw_packet_qp(dev, qp, in, pd);
+		err = create_raw_packet_qp(dev, qp, in, inlen, pd);
 	} else {
 		err = mlx5_core_create_qp(dev->mdev, &base->mqp, in, inlen);
 	}
@@ -1796,6 +1805,7 @@ err_create:
 	else if (qp->create_type == MLX5_QP_KERNEL)
 		destroy_qp_kernel(dev, qp);
 
+err:
 	kvfree(in);
 	return err;
 }

[PATCH 4.9 174/177] clk: migrate the count of orphaned clocks at init

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jerome Brunet <jbrunet@baylibre.com>

commit 99652a469df19086d594e8e89757d4081a812789 upstream.

The orphan clocks reparents should migrate any existing count from the
orphan clock to its new acestor clocks, otherwise we may have
inconsistent counts in the tree and end-up with gated critical clocks

Assuming we have two clocks, A and B.
* Clock A has CLK_IS_CRITICAL flag set.
* Clock B is an ancestor of A which can gate. Clock B gate is left
  enabled by the bootloader.

Step 1: Clock A is registered. Since it is a critical clock, it is
enabled. The clock being still an orphan, no parent are enabled.

Step 2: Clock B is registered and reparented to clock A (potentially
through several other clocks). We are now in situation where the enable
count of clock A is 1 while the enable count of its ancestors is 0, which
is not good.

Step 3: in lateinit, clk_disable_unused() is called, the enable_count of
clock B being 0, clock B is gated and and critical clock A actually gets
disabled.

This situation was found while adding fdiv_clk gates to the meson8b
platform.  These clocks parent clk81 critical clock, which is the mother
of all peripheral clocks in this system. Because of the issue described
here, the system is crashing when clk_disable_unused() is called.

The situation is solved by reverting
commit f8f8f1d04494 ("clk: Don't touch hardware when reparenting during registration").
To avoid breaking again the situation described in this commit
description, enabling critical clock should be done before walking the
orphan list. This way, a parent critical clock may not be accidentally
disabled due to the CLK_OPS_PARENT_ENABLE mechanism.

Fixes: f8f8f1d04494 ("clk: Don't touch hardware when reparenting during registration")
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/clk.c |   37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2438,22 +2438,37 @@ static int __clk_core_init(struct clk_co
 	core->rate = core->req_rate = rate;
 
 	/*
+	 * Enable CLK_IS_CRITICAL clocks so newly added critical clocks
+	 * don't get accidentally disabled when walking the orphan tree and
+	 * reparenting clocks
+	 */
+	if (core->flags & CLK_IS_CRITICAL) {
+		unsigned long flags;
+
+		clk_core_prepare(core);
+
+		flags = clk_enable_lock();
+		clk_core_enable(core);
+		clk_enable_unlock(flags);
+	}
+
+	/*
 	 * walk the list of orphan clocks and reparent any that newly finds a
 	 * parent.
 	 */
 	hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
 		struct clk_core *parent = __clk_init_parent(orphan);
-		unsigned long flags;
 
 		/*
-		 * we could call __clk_set_parent, but that would result in a
-		 * redundant call to the .set_rate op, if it exists
+		 * We need to use __clk_set_parent_before() and _after() to
+		 * to properly migrate any prepare/enable count of the orphan
+		 * clock. This is important for CLK_IS_CRITICAL clocks, which
+		 * are enabled during init but might not have a parent yet.
 		 */
 		if (parent) {
 			/* update the clk tree topology */
-			flags = clk_enable_lock();
-			clk_reparent(orphan, parent);
-			clk_enable_unlock(flags);
+			__clk_set_parent_before(orphan, parent);
+			__clk_set_parent_after(orphan, parent, NULL);
 			__clk_recalc_accuracies(orphan);
 			__clk_recalc_rates(orphan, 0);
 		}
@@ -2470,16 +2485,6 @@ static int __clk_core_init(struct clk_co
 	if (core->ops->init)
 		core->ops->init(core->hw);
 
-	if (core->flags & CLK_IS_CRITICAL) {
-		unsigned long flags;
-
-		clk_core_prepare(core);
-
-		flags = clk_enable_lock();
-		clk_core_enable(core);
-		clk_enable_unlock(flags);
-	}
-
 	kref_init(&core->ref);
 out:
 	clk_prepare_unlock();

[PATCH 4.9 175/177] RDMA/ucma: Fix access to non-initialized CM_ID object

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leon Romanovsky <leonro@mellanox.com>

commit 7688f2c3bbf55e52388e37ac5d63ca471a7712e1 upstream.

The attempt to join multicast group without ensuring that CMA device
exists will lead to the following crash reported by syzkaller.

[   64.076794] BUG: KASAN: null-ptr-deref in rdma_join_multicast+0x26e/0x12c0
[   64.076797] Read of size 8 at addr 00000000000000b0 by task join/691
[   64.076797]
[   64.076800] CPU: 1 PID: 691 Comm: join Not tainted 4.16.0-rc1-00219-gb97853b65b93 #23
[   64.076802] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4
[   64.076803] Call Trace:
[   64.076809]  dump_stack+0x5c/0x77
[   64.076817]  kasan_report+0x163/0x380
[   64.085859]  ? rdma_join_multicast+0x26e/0x12c0
[   64.086634]  rdma_join_multicast+0x26e/0x12c0
[   64.087370]  ? rdma_disconnect+0xf0/0xf0
[   64.088579]  ? __radix_tree_replace+0xc3/0x110
[   64.089132]  ? node_tag_clear+0x81/0xb0
[   64.089606]  ? idr_alloc_u32+0x12e/0x1a0
[   64.090517]  ? __fprop_inc_percpu_max+0x150/0x150
[   64.091768]  ? tracing_record_taskinfo+0x10/0xc0
[   64.092340]  ? idr_alloc+0x76/0xc0
[   64.092951]  ? idr_alloc_u32+0x1a0/0x1a0
[   64.093632]  ? ucma_process_join+0x23d/0x460
[   64.094510]  ucma_process_join+0x23d/0x460
[   64.095199]  ? ucma_migrate_id+0x440/0x440
[   64.095696]  ? futex_wake+0x10b/0x2a0
[   64.096159]  ucma_join_multicast+0x88/0xe0
[   64.096660]  ? ucma_process_join+0x460/0x460
[   64.097540]  ? _copy_from_user+0x5e/0x90
[   64.098017]  ucma_write+0x174/0x1f0
[   64.098640]  ? ucma_resolve_route+0xf0/0xf0
[   64.099343]  ? rb_erase_cached+0x6c7/0x7f0
[   64.099839]  __vfs_write+0xc4/0x350
[   64.100622]  ? perf_syscall_enter+0xe4/0x5f0
[   64.101335]  ? kernel_read+0xa0/0xa0
[   64.103525]  ? perf_sched_cb_inc+0xc0/0xc0
[   64.105510]  ? syscall_exit_register+0x2a0/0x2a0
[   64.107359]  ? __switch_to+0x351/0x640
[   64.109285]  ? fsnotify+0x899/0x8f0
[   64.111610]  ? fsnotify_unmount_inodes+0x170/0x170
[   64.113876]  ? __fsnotify_update_child_dentry_flags+0x30/0x30
[   64.115813]  ? ring_buffer_record_is_on+0xd/0x20
[   64.117824]  ? __fget+0xa8/0xf0
[   64.119869]  vfs_write+0xf7/0x280
[   64.122001]  SyS_write+0xa1/0x120
[   64.124213]  ? SyS_read+0x120/0x120
[   64.126644]  ? SyS_read+0x120/0x120
[   64.128563]  do_syscall_64+0xeb/0x250
[   64.130732]  entry_SYSCALL_64_after_hwframe+0x21/0x86
[   64.132984] RIP: 0033:0x7f5c994ade99
[   64.135699] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[   64.138740] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99
[   64.141056] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015
[   64.143536] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000
[   64.146017] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0
[   64.148608] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0
[   64.151060]
[   64.153703] Disabling lock debugging due to kernel taint
[   64.156032] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0
[   64.159066] IP: rdma_join_multicast+0x26e/0x12c0
[   64.161451] PGD 80000001d0298067 P4D 80000001d0298067 PUD 1dea39067 PMD 0
[   64.164442] Oops: 0000 [#1] SMP KASAN PTI
[   64.166817] CPU: 1 PID: 691 Comm: join Tainted: G    B 4.16.0-rc1-00219-gb97853b65b93 #23
[   64.170004] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4
[   64.174985] RIP: 0010:rdma_join_multicast+0x26e/0x12c0
[   64.177246] RSP: 0018:ffff8801c8207860 EFLAGS: 00010282
[   64.179901] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff94789522
[   64.183344] RDX: 1ffffffff2d50fa5 RSI: 0000000000000297 RDI: 0000000000000297
[   64.186237] RBP: ffff8801c8207a50 R08: 0000000000000000 R09: ffffed0039040ea7
[   64.189328] R10: 0000000000000001 R11: ffffed0039040ea6 R12: 0000000000000000
[   64.192634] R13: 0000000000000000 R14: ffff8801e2022800 R15: ffff8801d4ac2400
[   64.196105] FS:  00007f5c99b98700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000
[   64.199211] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   64.202046] CR2: 00000000000000b0 CR3: 00000001d1c48004 CR4: 00000000003606a0
[   64.205032] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   64.208221] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   64.211554] Call Trace:
[   64.213464]  ? rdma_disconnect+0xf0/0xf0
[   64.216124]  ? __radix_tree_replace+0xc3/0x110
[   64.219337]  ? node_tag_clear+0x81/0xb0
[   64.222140]  ? idr_alloc_u32+0x12e/0x1a0
[   64.224422]  ? __fprop_inc_percpu_max+0x150/0x150
[   64.226588]  ? tracing_record_taskinfo+0x10/0xc0
[   64.229763]  ? idr_alloc+0x76/0xc0
[   64.232186]  ? idr_alloc_u32+0x1a0/0x1a0
[   64.234505]  ? ucma_process_join+0x23d/0x460
[   64.237024]  ucma_process_join+0x23d/0x460
[   64.240076]  ? ucma_migrate_id+0x440/0x440
[   64.243284]  ? futex_wake+0x10b/0x2a0
[   64.245302]  ucma_join_multicast+0x88/0xe0
[   64.247783]  ? ucma_process_join+0x460/0x460
[   64.250841]  ? _copy_from_user+0x5e/0x90
[   64.253878]  ucma_write+0x174/0x1f0
[   64.257008]  ? ucma_resolve_route+0xf0/0xf0
[   64.259877]  ? rb_erase_cached+0x6c7/0x7f0
[   64.262746]  __vfs_write+0xc4/0x350
[   64.265537]  ? perf_syscall_enter+0xe4/0x5f0
[   64.267792]  ? kernel_read+0xa0/0xa0
[   64.270358]  ? perf_sched_cb_inc+0xc0/0xc0
[   64.272575]  ? syscall_exit_register+0x2a0/0x2a0
[   64.275367]  ? __switch_to+0x351/0x640
[   64.277700]  ? fsnotify+0x899/0x8f0
[   64.280530]  ? fsnotify_unmount_inodes+0x170/0x170
[   64.283156]  ? __fsnotify_update_child_dentry_flags+0x30/0x30
[   64.286182]  ? ring_buffer_record_is_on+0xd/0x20
[   64.288749]  ? __fget+0xa8/0xf0
[   64.291136]  vfs_write+0xf7/0x280
[   64.292972]  SyS_write+0xa1/0x120
[   64.294965]  ? SyS_read+0x120/0x120
[   64.297474]  ? SyS_read+0x120/0x120
[   64.299751]  do_syscall_64+0xeb/0x250
[   64.301826]  entry_SYSCALL_64_after_hwframe+0x21/0x86
[   64.304352] RIP: 0033:0x7f5c994ade99
[   64.306711] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[   64.309577] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99
[   64.312334] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015
[   64.315783] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000
[   64.318365] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0
[   64.320980] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0
[   64.323515] Code: e8 e8 79 08 ff 4c 89 ff 45 0f b6 a7 b8 01 00 00 e8 68 7c 08 ff 49 8b 1f 4d 89 e5 49 c1 e4 04 48 8
[   64.330753] RIP: rdma_join_multicast+0x26e/0x12c0 RSP: ffff8801c8207860
[   64.332979] CR2: 00000000000000b0
[   64.335550] ---[ end trace 0c00c17a408849c1 ]---

Reported-by: <syzbot+e6aba77967bd72cbc9d6@syzkaller.appspotmail.com>
Fixes: c8f6a362bf3e ("RDMA/cma: Add multicast communication support")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/core/cma.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -4039,6 +4039,9 @@ int rdma_join_multicast(struct rdma_cm_i
 	struct cma_multicast *mc;
 	int ret;
 
+	if (!id->device)
+		return -EINVAL;
+
 	id_priv = container_of(id, struct rdma_id_private, id);
 	if (!cma_comp(id_priv, RDMA_CM_ADDR_BOUND) &&
 	    !cma_comp(id_priv, RDMA_CM_ADDR_RESOLVED))

[PATCH 4.9 176/177] RDMA/ucma: Dont allow join attempts for unsupported AF family

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Leon Romanovsky <leonro@mellanox.com>

commit 0c81ffc60d5280991773d17e84bda605387148b1 upstream.

Users can provide garbage while calling to ucma_join_ip_multicast(),
it will indirectly cause to rdma_addr_size() return 0, making the
call to ucma_process_join(), which had the right checks, but it is
better to check the input as early as possible.

The following crash from syzkaller revealed it.

kernel BUG at lib/string.c:1052!
invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 4113 Comm: syz-executor0 Not tainted 4.16.0-rc5+ #261
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051
RSP: 0018:ffff8801ca81f8f0 EFLAGS: 00010286
RAX: 0000000000000022 RBX: 1ffff10039503f23 RCX: 0000000000000000
RDX: 0000000000000022 RSI: 1ffff10039503ed3 RDI: ffffed0039503f12
RBP: ffff8801ca81f8f0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000006 R11: 0000000000000000 R12: ffff8801ca81f998
R13: ffff8801ca81f938 R14: ffff8801ca81fa58 R15: 000000000000fa00
FS:  0000000000000000(0000) GS:ffff8801db200000(0063) knlGS:000000000a12a900
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 0000000008138024 CR3: 00000001cbb58004 CR4: 00000000001606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 memcpy include/linux/string.h:344 [inline]
 ucma_join_ip_multicast+0x36b/0x3b0 drivers/infiniband/core/ucma.c:1421
 ucma_write+0x2d6/0x3d0 drivers/infiniband/core/ucma.c:1633
 __vfs_write+0xef/0x970 fs/read_write.c:480
 vfs_write+0x189/0x510 fs/read_write.c:544
 SYSC_write fs/read_write.c:589 [inline]
 SyS_write+0xef/0x220 fs/read_write.c:581
 do_syscall_32_irqs_on arch/x86/entry/common.c:330 [inline]
 do_fast_syscall_32+0x3ec/0xf9f arch/x86/entry/common.c:392
 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7f9ec99
RSP: 002b:00000000ff8172cc EFLAGS: 00000282 ORIG_RAX: 0000000000000004
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020000100
RDX: 0000000000000063 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 42 2c e3 fb eb de
55 48 89 fe 48 c7 c7 80 75 98 86 48 89 e5 e8 85 95 94 fb <0f> 0b 90 90 90 90
90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56
RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801ca81f8f0

Fixes: 5bc2b7b397b0 ("RDMA/ucma: Allow user space to specify AF_IB when joining multicast")
Reported-by: <syzbot+2287ac532caa81900a4e@syzkaller.appspotmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/core/ucma.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -1330,7 +1330,7 @@ static ssize_t ucma_process_join(struct
 		return -ENOSPC;
 
 	addr = (struct sockaddr *) &cmd->addr;
-	if (!cmd->addr_size || (cmd->addr_size != rdma_addr_size(addr)))
+	if (cmd->addr_size != rdma_addr_size(addr))
 		return -EINVAL;
 
 	if (cmd->join_flags == RDMA_MC_JOIN_FLAG_FULLMEMBER)
@@ -1398,6 +1398,9 @@ static ssize_t ucma_join_ip_multicast(st
 	join_cmd.uid = cmd.uid;
 	join_cmd.id = cmd.id;
 	join_cmd.addr_size = rdma_addr_size((struct sockaddr *) &cmd.addr);
+	if (!join_cmd.addr_size)
+		return -EINVAL;
+
 	join_cmd.join_flags = RDMA_MC_JOIN_FLAG_FULLMEMBER;
 	memcpy(&join_cmd.addr, &cmd.addr, join_cmd.addr_size);
 
@@ -1413,6 +1416,9 @@ static ssize_t ucma_join_multicast(struc
 	if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
 		return -EFAULT;
 
+	if (!rdma_addr_size((struct sockaddr *)&cmd.addr))
+		return -EINVAL;
+
 	return ucma_process_join(file, &cmd, out_len);
 }
 

[PATCH 4.9 177/177] usb: gadget: f_hid: fix: Move IN request allocation to set_alt()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Opasiak <kopasiak90@gmail.com>

commit 749494b6bdbbaf0899aa1c62a1ad74cd747bce47 upstream.

Since commit: ba1582f22231 ("usb: gadget: f_hid: use alloc_ep_req()")
we cannot allocate any requests in bind() as we check if we should
align request buffer based on endpoint descriptor which is assigned
in set_alt().

Allocating request in bind() function causes a NULL pointer
dereference.

This commit moves allocation of IN request from bind() to set_alt()
to prevent this issue.

Fixes: ba1582f22231 ("usb: gadget: f_hid: use alloc_ep_req()")
Cc: stable@vger.kernel.org
Tested-by: David Lechner <david@lechnology.com>
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/f_hid.c |   89 +++++++++++++++++++++++++++---------
 1 file changed, 67 insertions(+), 22 deletions(-)

--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -284,6 +284,7 @@ static ssize_t f_hidg_write(struct file
 			    size_t count, loff_t *offp)
 {
 	struct f_hidg *hidg  = file->private_data;
+	struct usb_request *req;
 	unsigned long flags;
 	ssize_t status = -ENOMEM;
 
@@ -293,7 +294,7 @@ static ssize_t f_hidg_write(struct file
 	spin_lock_irqsave(&hidg->write_spinlock, flags);
 
 #define WRITE_COND (!hidg->write_pending)
-
+try_again:
 	/* write queue */
 	while (!WRITE_COND) {
 		spin_unlock_irqrestore(&hidg->write_spinlock, flags);
@@ -308,6 +309,7 @@ static ssize_t f_hidg_write(struct file
 	}
 
 	hidg->write_pending = 1;
+	req = hidg->req;
 	count  = min_t(unsigned, count, hidg->report_length);
 
 	spin_unlock_irqrestore(&hidg->write_spinlock, flags);
@@ -320,24 +322,38 @@ static ssize_t f_hidg_write(struct file
 		goto release_write_pending;
 	}
 
-	hidg->req->status   = 0;
-	hidg->req->zero     = 0;
-	hidg->req->length   = count;
-	hidg->req->complete = f_hidg_req_complete;
-	hidg->req->context  = hidg;
+	spin_lock_irqsave(&hidg->write_spinlock, flags);
+
+	/* we our function has been disabled by host */
+	if (!hidg->req) {
+		free_ep_req(hidg->in_ep, hidg->req);
+		/*
+		 * TODO
+		 * Should we fail with error here?
+		 */
+		goto try_again;
+	}
+
+	req->status   = 0;
+	req->zero     = 0;
+	req->length   = count;
+	req->complete = f_hidg_req_complete;
+	req->context  = hidg;
 
 	status = usb_ep_queue(hidg->in_ep, hidg->req, GFP_ATOMIC);
 	if (status < 0) {
 		ERROR(hidg->func.config->cdev,
 			"usb_ep_queue error on int endpoint %zd\n", status);
-		goto release_write_pending;
+		goto release_write_pending_unlocked;
 	} else {
 		status = count;
 	}
+	spin_unlock_irqrestore(&hidg->write_spinlock, flags);
 
 	return status;
 release_write_pending:
 	spin_lock_irqsave(&hidg->write_spinlock, flags);
+release_write_pending_unlocked:
 	hidg->write_pending = 0;
 	spin_unlock_irqrestore(&hidg->write_spinlock, flags);
 
@@ -541,12 +557,23 @@ static void hidg_disable(struct usb_func
 		kfree(list);
 	}
 	spin_unlock_irqrestore(&hidg->read_spinlock, flags);
+
+	spin_lock_irqsave(&hidg->write_spinlock, flags);
+	if (!hidg->write_pending) {
+		free_ep_req(hidg->in_ep, hidg->req);
+		hidg->write_pending = 1;
+	}
+
+	hidg->req = NULL;
+	spin_unlock_irqrestore(&hidg->write_spinlock, flags);
 }
 
 static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 {
 	struct usb_composite_dev		*cdev = f->config->cdev;
 	struct f_hidg				*hidg = func_to_hidg(f);
+	struct usb_request			*req_in = NULL;
+	unsigned long				flags;
 	int i, status = 0;
 
 	VDBG(cdev, "hidg_set_alt intf:%d alt:%d\n", intf, alt);
@@ -567,6 +594,12 @@ static int hidg_set_alt(struct usb_funct
 			goto fail;
 		}
 		hidg->in_ep->driver_data = hidg;
+
+		req_in = hidg_alloc_ep_req(hidg->in_ep, hidg->report_length);
+		if (!req_in) {
+			status = -ENOMEM;
+			goto disable_ep_in;
+		}
 	}
 
 
@@ -578,12 +611,12 @@ static int hidg_set_alt(struct usb_funct
 					    hidg->out_ep);
 		if (status) {
 			ERROR(cdev, "config_ep_by_speed FAILED!\n");
-			goto fail;
+			goto free_req_in;
 		}
 		status = usb_ep_enable(hidg->out_ep);
 		if (status < 0) {
 			ERROR(cdev, "Enable OUT endpoint FAILED!\n");
-			goto fail;
+			goto free_req_in;
 		}
 		hidg->out_ep->driver_data = hidg;
 
@@ -599,17 +632,37 @@ static int hidg_set_alt(struct usb_funct
 				req->context  = hidg;
 				status = usb_ep_queue(hidg->out_ep, req,
 						      GFP_ATOMIC);
-				if (status)
+				if (status) {
 					ERROR(cdev, "%s queue req --> %d\n",
 						hidg->out_ep->name, status);
+					free_ep_req(hidg->out_ep, req);
+				}
 			} else {
-				usb_ep_disable(hidg->out_ep);
 				status = -ENOMEM;
-				goto fail;
+				goto disable_out_ep;
 			}
 		}
 	}
 
+	if (hidg->in_ep != NULL) {
+		spin_lock_irqsave(&hidg->write_spinlock, flags);
+		hidg->req = req_in;
+		hidg->write_pending = 0;
+		spin_unlock_irqrestore(&hidg->write_spinlock, flags);
+
+		wake_up(&hidg->write_queue);
+	}
+	return 0;
+disable_out_ep:
+	usb_ep_disable(hidg->out_ep);
+free_req_in:
+	if (req_in)
+		free_ep_req(hidg->in_ep, req_in);
+
+disable_ep_in:
+	if (hidg->in_ep)
+		usb_ep_disable(hidg->in_ep);
+
 fail:
 	return status;
 }
@@ -658,12 +711,6 @@ static int hidg_bind(struct usb_configur
 		goto fail;
 	hidg->out_ep = ep;
 
-	/* preallocate request and buffer */
-	status = -ENOMEM;
-	hidg->req = alloc_ep_req(hidg->in_ep, hidg->report_length);
-	if (!hidg->req)
-		goto fail;
-
 	/* set descriptor dynamic values */
 	hidg_interface_desc.bInterfaceSubClass = hidg->bInterfaceSubClass;
 	hidg_interface_desc.bInterfaceProtocol = hidg->bInterfaceProtocol;
@@ -690,6 +737,8 @@ static int hidg_bind(struct usb_configur
 		goto fail;
 
 	spin_lock_init(&hidg->write_spinlock);
+	hidg->write_pending = 1;
+	hidg->req = NULL;
 	spin_lock_init(&hidg->read_spinlock);
 	init_waitqueue_head(&hidg->write_queue);
 	init_waitqueue_head(&hidg->read_queue);
@@ -954,10 +1003,6 @@ static void hidg_unbind(struct usb_confi
 	device_destroy(hidg_class, MKDEV(major, hidg->minor));
 	cdev_del(&hidg->cdev);
 
-	/* disable/free request and end point */
-	usb_ep_disable(hidg->in_ep);
-	free_ep_req(hidg->in_ep, hidg->req);
-
 	usb_free_all_descriptors(f);
 }
 

Re: [PATCH 4.9 000/177] 4.9.90-stable review

[Naresh Kamboju]

On 23 March 2018 at 15:22, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 4.9.90 release.
> There are 177 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Mar 25 09:41:28 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.90-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Summary
------------------------------------------------------------------------

kernel: 4.9.90-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: 8d6f4aae473a1fd5c670f7dfb22c303a9d391a9a
git describe: v4.9.89-178-g8d6f4aae473a
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.89-178-g8d6f4aae473a


No regressions (compared to build v4.9.89-174-g6f50c5691369)

Boards, architectures and test suites:
-------------------------------------

dragonboard-410c - arm64
* boot - pass: 20
* kselftest - skip: 27, pass: 36
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - pass: 14
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 148, pass: 1002
* ltp-timers-tests - skip: 1, pass: 12

hi6220-hikey - arm64
* boot - pass: 20
* kselftest - skip: 24, pass: 39
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 151, pass: 999
* ltp-timers-tests - skip: 1, pass: 12

juno-r2 - arm64
* boot - pass: 20
* kselftest - skip: 23, pass: 39
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 149, pass: 1001
* ltp-timers-tests - skip: 1, pass: 12

qemu_x86_64
* boot - pass: 22
* kselftest - skip: 28, pass: 52
* kselftest-vsyscall-mode-native - skip: 28, pass: 52
* kselftest-vsyscall-mode-none - skip: 28, pass: 52
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 149, pass: 1001
* ltp-timers-tests - skip: 1, pass: 12

x15 - arm
* boot - pass: 20
* kselftest - skip: 24, pass: 38
* libhugetlbfs - skip: 1, pass: 87
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 2, pass: 20
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 97, pass: 1053
* ltp-timers-tests - skip: 1, pass: 12

x86_64
* boot - pass: 22
* kselftest - skip: 24, fail: 1, pass: 54
* kselftest-vsyscall-mode-native - skip: 25, fail: 1, pass: 54
* kselftest-vsyscall-mode-none - skip: 25, fail: 2, pass: 53
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 1, pass: 62
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 5, pass: 9
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 119, pass: 1030
* ltp-timers-tests - skip: 1, pass: 12

--
Linaro QA (beta)
https://qa-reports.linaro.org

Re: [PATCH 4.9 000/177] 4.9.90-stable review

[kernelci.org bot]

stable-rc/linux-4.9.y boot: 117 boots: 0 failed, 106 passed with 7 offline, 4 untried/unknown (v4.9.89-178-g8d6f4aae473a)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.89-178-g8d6f4aae473a/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.89-178-g8d6f4aae473a/

Tree: stable-rc
Branch: linux-4.9.y
Git Describe: v4.9.89-178-g8d6f4aae473a
Git Commit: 8d6f4aae473a1fd5c670f7dfb22c303a9d391a9a
Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 60 unique boards, 21 SoC families, 19 builds out of 183

Offline Platforms:

arm:

    tegra_defconfig:
        tegra20-iris-512: 1 offline lab

    multi_v7_defconfig:
        exynos5410-odroidxu: 1 offline lab
        exynos5800-peach-pi: 1 offline lab
        tegra20-iris-512: 1 offline lab

    exynos_defconfig:
        exynos5410-odroidxu: 1 offline lab
        exynos5800-peach-pi: 1 offline lab

arm64:

    defconfig:
        meson-gxbb-odroidc2: 1 offline lab

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.9 000/177] 4.9.90-stable review

[Greg Kroah-Hartman]

On Fri, Mar 23, 2018 at 08:20:00PM +0530, Naresh Kamboju wrote:
> On 23 March 2018 at 15:22, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> > This is the start of the stable review cycle for the 4.9.90 release.
> > There are 177 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun Mar 25 09:41:28 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.90-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> 
> Results from Linaro’s test farm.
> No regressions on arm64, arm and x86_64.

Great, thanks for testing these and letting me know.

greg k-h

Re: [PATCH 4.9 000/177] 4.9.90-stable review

[Guenter Roeck]

On 03/23/2018 02:52 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.90 release.
> There are 177 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Mar 25 09:41:28 UTC 2018.
> Anything received after that time might be too late.
> 

Partial results, build only.

Build results:
	total: 145 pass: 143 fail: 2
Failed builds:
	arm:allmodconfig
	arm64:allmodconfig

drivers/rtc/rtc-ac100.c:570:14: error: implicit declaration of function ‘devm_rtc_allocate_device'
drivers/rtc/rtc-ac100.c:599:8: error: implicit declaration of function ‘rtc_register_device’

Guenter

Re: [PATCH 4.9 000/177] 4.9.90-stable review

[Greg Kroah-Hartman]

On Fri, Mar 23, 2018 at 10:18:20AM -0700, Guenter Roeck wrote:
> On 03/23/2018 02:52 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.9.90 release.
> > There are 177 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun Mar 25 09:41:28 UTC 2018.
> > Anything received after that time might be too late.
> > 
> 
> Partial results, build only.
> 
> Build results:
> 	total: 145 pass: 143 fail: 2
> Failed builds:
> 	arm:allmodconfig
> 	arm64:allmodconfig
> 
> drivers/rtc/rtc-ac100.c:570:14: error: implicit declaration of function ‘devm_rtc_allocate_device'
> drivers/rtc/rtc-ac100.c:599:8: error: implicit declaration of function ‘rtc_register_device’

Offending patch now dropped, thanks.

greg k-h

Re: [PATCH 4.9 000/177] 4.9.90-stable review

[Shuah Khan]

On 03/23/2018 03:52 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.90 release.
> There are 177 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Mar 25 09:41:28 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.90-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.9 000/177] 4.9.90-stable review

[Guenter Roeck]

On 03/23/2018 02:52 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.90 release.
> There are 177 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Mar 25 09:41:28 UTC 2018.
> Anything received after that time might be too late.
> 

For v4.9.89-177-g87485cf:

Build results:
	total: 145 pass: 145 fail: 0
Qemu test results:
	total: 137 pass: 137 fail: 0

Guenter

Re: [PATCH 4.9 000/177] 4.9.90-stable review

[Naresh Kamboju]

>> Partial results, build only.
>>
>> Build results:
>>       total: 145 pass: 143 fail: 2
>> Failed builds:
>>       arm:allmodconfig
>>       arm64:allmodconfig
>>
>> drivers/rtc/rtc-ac100.c:570:14: error: implicit declaration of function ‘devm_rtc_allocate_device'
>> drivers/rtc/rtc-ac100.c:599:8: error: implicit declaration of function ‘rtc_register_device’
>
> Offending patch now dropped, thanks.
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Summary
------------------------------------------------------------------------

kernel: 4.9.90-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: 87485cf16bc78d10cc59990ecdf640d34d8846d5
git describe: v4.9.89-177-g87485cf16bc7
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.89-177-g87485cf16bc7


No regressions (compared to build v4.9.89-178-g8d6f4aae473a)

Boards, architectures and test suites:
-------------------------------------

juno-r2 - arm64
* boot - pass: 20
* kselftest - skip: 23, pass: 40
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 149, pass: 1001
* ltp-timers-tests - skip: 1, pass: 12

qemu_x86_64
* boot - pass: 22
* kselftest - skip: 28, pass: 52
* kselftest-vsyscall-mode-native - skip: 28, pass: 52
* kselftest-vsyscall-mode-none - skip: 28, pass: 52
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 149, pass: 1001
* ltp-timers-tests - skip: 1, pass: 12

x15 - arm
* boot - pass: 21
* kselftest - skip: 24, pass: 38
* libhugetlbfs - skip: 1, pass: 87
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 2, pass: 20
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 97, pass: 1053
* ltp-timers-tests - skip: 1, pass: 12

x86_64
* boot - pass: 22
* kselftest - skip: 25, fail: 1, pass: 54
* kselftest-vsyscall-mode-native - skip: 25, fail: 1, pass: 54
* kselftest-vsyscall-mode-none - skip: 25, fail: 2, pass: 52
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 1, pass: 62
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 5, pass: 9
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 119, pass: 1031
* ltp-timers-tests - skip: 1, pass: 12

--
Linaro QA (beta)
https://qa-reports.linaro.org