From: Hans de Goede <hdegoede@redhat.com> To: Jiri Kosina <jikos@kernel.org>, Thorsten Leemhuis <regressions@leemhuis.info> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>, linux-input@vger.kernel.org, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, "regressions@lists.linux.dev" <regressions@lists.linux.dev>, casteyde.christian@free.fr Subject: Re: [regression] Touchpad is not working after suspend to RAM since kernel 5.14 (fwd from b.k.o bug 214667) Date: Mon, 10 Jan 2022 15:58:13 +0100 [thread overview] Message-ID: <aa50d961-7861-5263-7f83-91ca201ac8b1@redhat.com> (raw) In-Reply-To: <nycvar.YFH.7.76.2201101359080.28059@cbobk.fhfr.pm> Hi, On 1/10/22 14:00, Jiri Kosina wrote: > On Tue, 28 Dec 2021, Thorsten Leemhuis wrote: > >> Hi, this is your Linux kernel regression tracker speaking. >> >> Forwarding a regression reported by Christian Casteyde (CCed) in >> bugzilla.kernel.org which apparently has fallen through the cracks. >> >> https://bugzilla.kernel.org/show_bug.cgi?id=214667 Thanks, I will respond to this in the bugzilla ticket. Regards, Hans >> >> A few quotes from comments in the ticket: >> >>> Since Kernel 5.14 (probably 5.14-rc5 indeed) the touchpad does not >>> work anymore after resume from suspend to RAM. Was working with 5.13 >>> kernel. >>> >>> I've bisected the bug, first bad commit is: >>> b3e29642548258c7cd2cb3326a776fff84cd6b69 is the first bad commit >>> >>> SC[33mcommit b3e29642548258c7cd2cb3326a776fff84cd6b69ESC[m Merge: >>> 8f4ef88 498d0dd Author: Jiri Kosina <jkosina@suse.cz> Date: Wed Jun >>> 30 09:15:15 2021 +0200 >>> >>> Merge branch 'for-5.14/multitouch' into for-linus >>> >>> - patch series that ensures that hid-multitouch driver disables touch >>> and button-press reporting on hid-mt devices during suspend when the >>> device is not configured as a wakeup-source, from Hans de Goede >>> >>> Seem to be related with the observed behaviour. >> >> Yes, that's a merge, but it contains code changes, maybe something went >> wrong there. > > CCing Hans, as that merge commit brought his series "disable touch and > button-press during suspend" series. > > It's strange though that bisection points to a merge commit and not a > commit in that series. > >> >>> Update with kernel 5.15-rc7 >>> >>> Still present. However, I noticed dmesg ouput interesting messages >>> telling there is a transfer from the ELAN touchpad while suspended, >>> it failed to suspend, then failed to resume. The interesting thing is >>> if I try to suspend a second time, at resume the touchpad manages to >>> resume. Appending dmesg output for reference. >> >> >>> The problem is still present in 5.16-rc7, but indeed it got worse >>> (and indeed is now critical). a) After the first "suspend" tentative >>> (closing the lid), the laptop doesn't suspend (only the screen is >>> blanked) b) When I reopen the lid, the touchpad stays disabled c) >>> When I try to suspend a second time (closing the lid), the system >>> totally freeze (without any info in dmesg) and I need to reset it >>> totally. I'll open a separate bug report for this one, when bisected, >>> and will try to post it to the suspend maintainer together with the >>> mailing list (I'm not accustomed to mailing lists). >> >> FWIW, Christian did this here: >> https://lore.kernel.org/all/256689953.114854578.1640622738334.JavaMail.root@zimbra40-e7.priv.proxad.net/ >> >>> FYI, if I remember well, reverting this single commit fixed the issue >>> and the diff was making sense (try to disable the touchpad before >>> going to sleep to prevent unexpected event from it while >>> suspending... if I understood well the code). >> >> To be sure this issue doesn't again fall through the cracks unnoticed, >> I'm adding it to regzbot, my Linux kernel regression tracking bot: >> >> #regzbot introduced b3e29642548258c7cd2cb3326a776fff84cd6b69ESC >> #regzbot title hid: touchpad is not working after suspend to RAM >> #regzbot from: Christian Casteyde <casteyde.christian@free.fr> >> #regzbot ignore-activity >> >> Reminder: when fixing the issue, please add a 'Link:' tag with the URL >> to the report (the parent of this mail) using the kernel.org redirector, >> as explained in 'Documentation/process/submitting-patches.rst'. Regzbot >> then will automatically mark the regression as resolved once the fix >> lands in the appropriate tree. For more details about regzbot see footer. >> >> Sending this to everyone that got the initial report, to make all aware >> of the tracking. I also hope that messages like this motivate people to >> directly get at least the regression mailing list and ideally even >> regzbot involved when dealing with regressions, as messages like this >> wouldn't be needed then. >> >> Don't worry, I'll send further messages wrt to this regression just to >> the lists (with a tag in the subject so people can filter them away), as >> long as they are intended just for regzbot. With a bit of luck no such >> messages will be needed anyway. >> >> >> >> Ciao, Thorsten (wearing his 'Linux kernel regression tracker' hat). >> >> P.S.: As a Linux kernel regression tracker I'm getting a lot of reports >> on my table. I can only look briefly into most of them. Unfortunately >> therefore I sometimes will get things wrong or miss something important. >> I hope that's not the case here; if you think it is, don't hesitate to >> tell me about it in a public reply. That's in everyone's interest, as >> what I wrote above might be misleading to everyone reading this; any >> suggestion I gave thus might sent someone reading this down the wrong >> rabbit hole, which none of us wants. >> >> BTW, I have no personal interest in this issue, which is tracked using >> regzbot, my Linux kernel regression tracking bot >> (https://linux-regtracking.leemhuis.info/regzbot/). I'm only posting >> this mail to get things rolling again and hence don't need to be CC on >> all further activities wrt to this regression. >> >> --- >> Additional information about regzbot: >> >> If you want to know more about regzbot, check out its web-interface, the >> getting start guide, and/or the references documentation: >> >> https://linux-regtracking.leemhuis.info/regzbot/ >> https://gitlab.com/knurd42/regzbot/-/blob/main/docs/getting_started.md >> https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md >> >> The last two documents will explain how you can interact with regzbot >> yourself if your want to. >> >> Hint for reporters: when reporting a regression it's in your interest to >> tell #regzbot about it in the report, as that will ensure the regression >> gets on the radar of regzbot and the regression tracker. That's in your >> interest, as they will make sure the report won't fall through the >> cracks unnoticed. >> >> Hint for developers: you normally don't need to care about regzbot once >> it's involved. Fix the issue as you normally would, just remember to >> include a 'Link:' tag to the report in the commit message, as explained >> in Documentation/process/submitting-patches.rst >> That aspect was recently was made more explicit in commit 1f57bd42b77c: >> https://git.kernel.org/linus/1f57bd42b77c >> >
prev parent reply other threads:[~2022-01-10 14:58 UTC|newest] Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-12-28 7:29 Thorsten Leemhuis 2022-01-10 13:00 ` Jiri Kosina 2022-01-10 14:58 ` Hans de Goede [this message]
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=aa50d961-7861-5263-7f83-91ca201ac8b1@redhat.com \ --to=hdegoede@redhat.com \ --cc=benjamin.tissoires@redhat.com \ --cc=casteyde.christian@free.fr \ --cc=jikos@kernel.org \ --cc=linux-input@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=regressions@leemhuis.info \ --cc=regressions@lists.linux.dev \ --subject='Re: [regression] Touchpad is not working after suspend to RAM since kernel 5.14 (fwd from b.k.o bug 214667)' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).