[PATCH 5.15 000/132] 5.15.42-rc1 review

[PATCH 5.15 000/132] 5.15.42-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.15.42 release.
There are 132 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 25 May 2022 16:56:55 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.42-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.15.42-rc1

David Howells <dhowells@redhat.com>
    afs: Fix afs_getattr() to refetch file status if callback break occurred

Yang Yingliang <yangyingliang@huawei.com>
    i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()

Sean Wang <sean.wang@mediatek.com>
    mt76: mt7921e: fix possible probe failure after reboot

Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
    dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group

Marek Vasut <marex@denx.de>
    Input: ili210x - fix reset timing

Shreyas K K <quic_shrekk@quicinc.com>
    arm64: Enable repeat tlbi workaround on KRYO4XX gold CPUs

Grant Grundler <grundler@chromium.org>
    net: atlantic: verify hw_head_ lies within TX buffer ring

Grant Grundler <grundler@chromium.org>
    net: atlantic: add check for MAX_SKB_FRAGS

Grant Grundler <grundler@chromium.org>
    net: atlantic: reduce scope of is_rsc_complete

Grant Grundler <grundler@chromium.org>
    net: atlantic: fix "frag[0] not initialized"

Yang Yingliang <yangyingliang@huawei.com>
    net: stmmac: fix missing pci_disable_device() on error in stmmac_pci_probe()

Yang Yingliang <yangyingliang@huawei.com>
    ethernet: tulip: fix missing pci_disable_device() on error in tulip_init_one()

Johannes Berg <johannes.berg@intel.com>
    nl80211: fix locking in nl80211_set_tx_bitrate_mask()

Lina Wang <lina.wang@mediatek.com>
    net: fix wrong network header length

Daniel Vetter <daniel.vetter@ffwll.ch>
    fbdev: Prevent possible use-after-free in fb_release()

Javier Martinez Canillas <javierm@redhat.com>
    Revert "fbdev: Make fb_release() return -ENODEV if fbdev was unregistered"

Nicolas Dichtel <nicolas.dichtel@6wind.com>
    selftests: add ping test with ping_group_range tuned

Kieran Frewen <kieran.frewen@morsemicro.com>
    nl80211: validate S1G channel width

Felix Fietkau <nbd@nbd.name>
    mac80211: fix rx reordering with non explicit / psmp ack policy

Gleb Chesnokov <Chesnokov.G@raidix.com>
    scsi: qla2xxx: Fix missed DMA unmap for aborted commands

Brian Bunker <brian@purestorage.com>
    scsi: scsi_dh_alua: Properly handle the ALUA transitioning state

Thomas Richter <tmricht@linux.ibm.com>
    perf bench numa: Address compiler error on s390

Kan Liang <kan.liang@linux.intel.com>
    perf regs x86: Fix arch__intr_reg_mask() for the hybrid platform

Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    gpio: mvebu/pwm: Refuse requests with inverted polarity

Haibo Chen <haibo.chen@nxp.com>
    gpio: gpio-vf610: do not touch other bits when set the target bit

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf build: Fix check for btf__load_from_kernel_by_id() in libbpf

Daejun Park <daejun7.park@samsung.com>
    scsi: ufs: core: Fix referencing invalid rsp field

Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
    riscv: dts: sifive: fu540-c000: align dma node name with dtschema

Andrew Lunn <andrew@lunn.ch>
    net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.

Ritaro Takenaka <ritarot634@gmail.com>
    netfilter: flowtable: move dst_check to packet path

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: flowtable: pass flowtable to nf_flow_table_iterate()

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: flowtable: fix TCP flow teardown

Kevin Mitchell <kevmitch@arista.com>
    igb: skip phy status check where unavailable

Mat Martineau <mathew.j.martineau@linux.intel.com>
    mptcp: Do TCP fallback on early DSS checksum failure

Paolo Abeni <pabeni@redhat.com>
    mptcp: strict local address ID selection

Paolo Abeni <pabeni@redhat.com>
    mptcp: fix checksum byte order

Geliang Tang <geliang.tang@suse.com>
    mptcp: reuse __mptcp_make_csum in validate_data_csum

Geliang Tang <geliang.tang@suse.com>
    mptcp: change the parameter of __mptcp_make_csum

Ard Biesheuvel <ardb@kernel.org>
    ARM: 9197/1: spectre-bhb: fix loop8 sequence for Thumb2

Ard Biesheuvel <ardb@kernel.org>
    ARM: 9196/1: spectre-bhb: enable for Cortex-A15

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    net: af_key: add check for pfkey_broadcast in function pfkey_process

Maxim Mikityanskiy <maximmi@nvidia.com>
    net/mlx5e: Properly block LRO when XDP is enabled

Maor Dickman <maord@nvidia.com>
    net/mlx5: DR, Fix missing flow_source when creating multi-destination FW table

Duoming Zhou <duoming@zju.edu.cn>
    NFC: nci: fix sleep in atomic context bugs caused by nci_skb_alloc

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    net/qla3xxx: Fix a test in ql_reset_work()

Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
    clk: at91: generated: consider range when calculating best rate

Michal Wilczynski <michal.wilczynski@intel.com>
    ice: Fix interrupt moderation settings getting cleared

Maciej Fijalkowski <maciej.fijalkowski@intel.com>
    ice: move ice_container_type onto ice_ring_container

Paul Greenwalt <paul.greenwalt@intel.com>
    ice: fix possible under reporting of ethtool Tx and Rx statistics

Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
    ice: fix crash when writing timestamp on RX rings

Zixuan Fu <r33s3n6@gmail.com>
    net: vmxnet3: fix possible NULL pointer dereference in vmxnet3_rq_cleanup()

Zixuan Fu <r33s3n6@gmail.com>
    net: vmxnet3: fix possible use-after-free bugs in vmxnet3_rq_alloc_rx_buf()

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    net: systemport: Fix an error handling path in bcm_sysport_probe()

Pali Rohár <pali@kernel.org>
    Revert "PCI: aardvark: Rewrite IRQ code to chained IRQ handler"

Felix Fietkau <nbd@nbd.name>
    netfilter: nft_flow_offload: fix offload with pppoe + vlan

Felix Fietkau <nbd@nbd.name>
    net: fix dev_fill_forward_path with pppoe + bridge

Felix Fietkau <nbd@nbd.name>
    netfilter: nft_flow_offload: skip dst neigh lookup for ppp devices

Felix Fietkau <nbd@nbd.name>
    netfilter: flowtable: fix excessive hw offload attempts after failure

Paolo Abeni <pabeni@redhat.com>
    net/sched: act_pedit: sanitize shift argument before usage

Eyal Birger <eyal.birger@gmail.com>
    xfrm: fix "disable_policy" flag use when arriving from different devices

Nicolas Dichtel <nicolas.dichtel@6wind.com>
    xfrm: rework default policy structure

Harini Katakam <harini.katakam@xilinx.com>
    net: macb: Increment rx bd head after allocating skb and buffer

Alex Elder <elder@linaro.org>
    net: ipa: record proper RX transaction count

Randy Dunlap <rdunlap@infradead.org>
    ALSA: hda - fix unused Realtek function when PM is not enabled

Mattijs Korpershoek <mkorpershoek@baylibre.com>
    pinctrl: mediatek: mt8365: fix IES control pins

Howard Chiu <howard_chiu@aspeedtech.com>
    ARM: dts: aspeed: Add video engine to g6

Joel Stanley <joel@jms.id.au>
    ARM: dts: aspeed: Add secure boot controller node

Eddie James <eajames@linux.ibm.com>
    ARM: dts: aspeed: Add ADC for AST2600 and enable for Rainier and Everest

Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
    ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group

Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
    pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl

Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
    ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi

Charan Teja Kalla <quic_charante@quicinc.com>
    dma-buf: ensure unique directory name for dmabuf stats

Jérôme Pouiller <jerome.pouiller@silabs.com>
    dma-buf: fix use of DMA_BUF_SET_NAME_{A,B} in userspace

Hangyu Hua <hbh25y@gmail.com>
    drm/dp/mst: fix a possible memory leak in fetch_monitor_name()

Anusha Srivatsa <anusha.srivatsa@intel.com>
    drm/i915/dmc: Add MMIO range restrictions

Mario Limonciello <mario.limonciello@amd.com>
    drm/amd: Don't reset dGPUs if the system is going to s2idle

Ilya Dryomov <idryomov@gmail.com>
    libceph: fix potential use-after-free on linger ping and resends

Ondrej Mosnacek <omosnace@redhat.com>
    crypto: qcom-rng - fix infinite loop on requests not multiple of WORD_SZ

Catalin Marinas <catalin.marinas@arm.com>
    arm64: mte: Ensure the cleared tags are visible before setting the PTE

Prakruthi Deepak Heragu <quic_pheragu@quicinc.com>
    arm64: paravirt: Use RCU read locks to guard stolen_time

Sean Christopherson <seanjc@google.com>
    KVM: x86/mmu: Update number of zapped pages even if page list is stable

Jarkko Nikula <jarkko.nikula@linux.intel.com>
    Revert "can: m_can: pci: use custom bit timings for Elkhart Lake"

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold

Al Viro <viro@zeniv.linux.org.uk>
    Fix double fget() in vhost_net_set_backend()

Ondrej Mosnacek <omosnace@redhat.com>
    selinux: fix bad cleanup on error in hashtab_duplicate()

Peter Zijlstra <peterz@infradead.org>
    perf: Fix sys_perf_event_open() race against self

Werner Sembach <wse@tuxedocomputers.com>
    ALSA: hda/realtek: Add quirk for TongFang devices with pop noise

Takashi Iwai <tiwai@suse.de>
    ALSA: wavefront: Proper check of get_user() error

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Restore Rane SL-1 quirk

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: fix lockdep warnings during disk space reclamation

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: fix lockdep warnings in page operations for btree nodes

linyujun <linyujun809@huawei.com>
    ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame()

Tzung-Bi Shih <tzungbi@google.com>
    platform/chrome: cros_ec_debugfs: detach log reader wq from devm

Jakob Koschel <jakobkoschel@gmail.com>
    drbd: remove usage of list iterator variable after loop

Xiaoke Wang <xkernel.wang@foxmail.com>
    MIPS: lantiq: check the return value of kzalloc()

Guo Xuenan <guoxuenan@huawei.com>
    fs: fix an infinite loop in iomap_fiemap

Mario Limonciello <mario.limonciello@amd.com>
    rtc: mc146818-lib: Fix the AltCentury for AMD platforms

Anton Eidelman <anton.eidelman@gmail.com>
    nvme-multipath: fix hang when disk goes live over reconnect

Sagi Grimberg <sagi@grimberg.me>
    nvmet: use a private workqueue instead of the system workqueue

Michael S. Tsirkin <mst@redhat.com>
    tools/virtio: compile with -pthread

Zhu Lingshan <lingshan.zhu@intel.com>
    vhost_vdpa: don't setup irq offloading when irq_num < 0

Niklas Schnelle <schnelle@linux.ibm.com>
    s390/pci: improve zpci_dev reference counting

Heiko Carstens <hca@linux.ibm.com>
    s390/traps: improve panic message for translation-specification exception

Kai-Heng Feng <kai.heng.feng@canonical.com>
    ALSA: hda/realtek: Enable headset mic on Lenovo P360

Peter Zijlstra <peterz@infradead.org>
    crypto: x86/chacha20 - Avoid spurious jumps to other functions

Zheng Yongjun <zhengyongjun3@huawei.com>
    crypto: stm32 - fix reference leak in stm32_crc_remove

Andre Przywara <andre.przywara@arm.com>
    rtc: sun6i: Fix time overflow handling

Andreas Gruenbacher <agruenba@redhat.com>
    gfs2: Disable page faults during lockless buffered reads

Monish Kumar R <monish.kumar.r@intel.com>
    nvme-pci: add quirks for Samsung X5 SSDs

Zheng Yongjun <zhengyongjun3@huawei.com>
    Input: stmfts - fix reference leak in stmfts_input_open

Jeff LaBundy <jeff@labundy.com>
    Input: add bounds checking to input_set_capability()

David Gow <davidgow@google.com>
    um: Cleanup syscall_handler_t definition/cast, fix warning

Hugo Villeneuve <hvilleneuve@dimonoff.com>
    rtc: pcf2127: fix bug when reading alarm registers

Vincent Whitchurch <vincent.whitchurch@axis.com>
    rtc: fix use-after-free on device removal

Greg Thelen <gthelen@google.com>
    Revert "drm/i915/opregion: check port number bounds for SWSCI display power state"

Hyeonggon Yoo <42.hyeyoo@gmail.com>
    mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool

Terry Bowman <terry.bowman@amd.com>
    Watchdog: sp5100_tco: Enable Family 17h+ CPUs

Terry Bowman <terry.bowman@amd.com>
    Watchdog: sp5100_tco: Add initialization using EFCH MMIO

Terry Bowman <terry.bowman@amd.com>
    Watchdog: sp5100_tco: Refactor MMIO base address initialization

Terry Bowman <terry.bowman@amd.com>
    Watchdog: sp5100_tco: Move timer initialization into function

Terry Bowman <terry.bowman@amd.com>
    i2c: piix4: Enable EFCH MMIO for Family 17h+

Terry Bowman <terry.bowman@amd.com>
    i2c: piix4: Add EFCH MMIO support for SMBus port select

Terry Bowman <terry.bowman@amd.com>
    i2c: piix4: Add EFCH MMIO support to SMBus base address detect

Terry Bowman <terry.bowman@amd.com>
    i2c: piix4: Add EFCH MMIO support to region request and release

Terry Bowman <terry.bowman@amd.com>
    i2c: piix4: Move SMBus port selection into function

Terry Bowman <terry.bowman@amd.com>
    i2c: piix4: Move SMBus controller base address detect into function

Terry Bowman <terry.bowman@amd.com>
    i2c: piix4: Move port I/O region request/release code into functions

Terry Bowman <terry.bowman@amd.com>
    i2c: piix4: Replace hardcoded memory map size with a #define

Terry Bowman <terry.bowman@amd.com>
    kernel/resource: Introduce request_mem_region_muxed()

Willy Tarreau <w@1wt.eu>
    floppy: use a statically allocated error counter

Pavel Begunkov <asml.silence@gmail.com>
    io_uring: arm poll for non-nowait files

Schspa Shi <schspa@gmail.com>
    usb: gadget: fix race when gadget driver register via ioctl


-------------

Diffstat:

 Documentation/arm64/silicon-errata.rst             |   3 +
 .../bindings/pinctrl/aspeed,ast2600-pinctrl.yaml   |   2 +-
 Makefile                                           |   4 +-
 arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts       |  15 +
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts       |  15 +
 arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi           |   9 +-
 arch/arm/boot/dts/aspeed-g6.dtsi                   |  35 +++
 arch/arm/kernel/entry-armv.S                       |   2 +-
 arch/arm/kernel/stacktrace.c                       |  10 +-
 arch/arm/mm/proc-v7-bugs.c                         |   1 +
 arch/arm64/kernel/cpu_errata.c                     |   2 +
 arch/arm64/kernel/mte.c                            |   3 +
 arch/arm64/kernel/paravirt.c                       |  29 +-
 arch/mips/lantiq/falcon/sysctrl.c                  |   2 +
 arch/mips/lantiq/xway/gptu.c                       |   2 +
 arch/mips/lantiq/xway/sysctrl.c                    |  46 ++-
 arch/riscv/boot/dts/sifive/fu540-c000.dtsi         |   2 +-
 arch/s390/kernel/traps.c                           |   6 +-
 arch/s390/pci/pci.c                                |   1 +
 arch/s390/pci/pci_bus.h                            |   3 +-
 arch/s390/pci/pci_clp.c                            |   9 +-
 arch/s390/pci/pci_event.c                          |   7 +-
 arch/x86/crypto/chacha-avx512vl-x86_64.S           |   4 +-
 arch/x86/kvm/mmu/mmu.c                             |  10 +-
 arch/x86/um/shared/sysdep/syscalls_64.h            |   5 +-
 drivers/block/drbd/drbd_main.c                     |   7 +-
 drivers/block/floppy.c                             |  18 +-
 drivers/clk/at91/clk-generated.c                   |   4 +
 drivers/crypto/qcom-rng.c                          |   1 +
 drivers/crypto/stm32/stm32-crc32.c                 |   4 +-
 drivers/dma-buf/dma-buf.c                          |   8 +
 drivers/gpio/gpio-mvebu.c                          |   3 +
 drivers/gpio/gpio-vf610.c                          |   8 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu.h                |   2 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c           |  14 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c            |   2 +-
 drivers/gpu/drm/drm_dp_mst_topology.c              |   1 +
 drivers/gpu/drm/i915/display/intel_dmc.c           |  44 +++
 drivers/gpu/drm/i915/display/intel_opregion.c      |  15 -
 drivers/gpu/drm/i915/i915_reg.h                    |  16 +
 drivers/i2c/busses/i2c-mt7621.c                    |  10 +-
 drivers/i2c/busses/i2c-piix4.c                     | 213 ++++++++++---
 drivers/input/input.c                              |  19 ++
 drivers/input/touchscreen/ili210x.c                |   4 +-
 drivers/input/touchscreen/stmfts.c                 |   8 +-
 drivers/net/can/m_can/m_can_pci.c                  |  48 +--
 drivers/net/ethernet/aquantia/atlantic/aq_ring.c   |  20 +-
 .../ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c  |   7 +
 drivers/net/ethernet/broadcom/bcmsysport.c         |   6 +-
 drivers/net/ethernet/cadence/macb_main.c           |   2 +-
 drivers/net/ethernet/dec/tulip/tulip_core.c        |   5 +-
 drivers/net/ethernet/intel/ice/ice_base.c          |   2 +
 drivers/net/ethernet/intel/ice/ice_ethtool.c       |  38 +--
 drivers/net/ethernet/intel/ice/ice_lib.c           |  16 +-
 drivers/net/ethernet/intel/ice/ice_main.c          |   7 +-
 drivers/net/ethernet/intel/ice/ice_ptp.c           |  19 +-
 drivers/net/ethernet/intel/ice/ice_txrx.h          |  17 +-
 drivers/net/ethernet/intel/igb/igb_main.c          |   3 +-
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |   7 +
 .../mellanox/mlx5/core/steering/dr_action.c        |   6 +-
 .../ethernet/mellanox/mlx5/core/steering/dr_fw.c   |   4 +-
 .../mellanox/mlx5/core/steering/dr_types.h         |   3 +-
 .../ethernet/mellanox/mlx5/core/steering/fs_dr.c   |   4 +-
 .../ethernet/mellanox/mlx5/core/steering/mlx5dr.h  |   3 +-
 drivers/net/ethernet/qlogic/qla3xxx.c              |   3 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c   |   4 +-
 drivers/net/ipa/gsi.c                              |   6 +-
 drivers/net/ppp/pppoe.c                            |   1 +
 drivers/net/vmxnet3/vmxnet3_drv.c                  |   6 +
 drivers/net/wireless/mediatek/mt76/mt7921/dma.c    | 115 -------
 drivers/net/wireless/mediatek/mt76/mt7921/mcu.c    |  20 +-
 drivers/net/wireless/mediatek/mt76/mt7921/pci.c    | 121 ++++++++
 drivers/nvme/host/core.c                           |   1 +
 drivers/nvme/host/multipath.c                      |  25 +-
 drivers/nvme/host/nvme.h                           |   4 +
 drivers/nvme/host/pci.c                            |   5 +-
 drivers/nvme/target/admin-cmd.c                    |   2 +-
 drivers/nvme/target/configfs.c                     |   2 +-
 drivers/nvme/target/core.c                         |  24 +-
 drivers/nvme/target/fc.c                           |   8 +-
 drivers/nvme/target/fcloop.c                       |  16 +-
 drivers/nvme/target/io-cmd-file.c                  |   6 +-
 drivers/nvme/target/loop.c                         |   4 +-
 drivers/nvme/target/nvmet.h                        |   1 +
 drivers/nvme/target/passthru.c                     |   2 +-
 drivers/nvme/target/rdma.c                         |  12 +-
 drivers/nvme/target/tcp.c                          |  10 +-
 drivers/pci/controller/pci-aardvark.c              |  48 ++-
 drivers/pci/pci.c                                  |  10 +
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c         |  14 +-
 drivers/pinctrl/mediatek/pinctrl-mt8365.c          |   2 +-
 drivers/platform/chrome/cros_ec_debugfs.c          |  12 +-
 drivers/rtc/class.c                                |   9 +
 drivers/rtc/rtc-mc146818-lib.c                     |  16 +-
 drivers/rtc/rtc-pcf2127.c                          |   3 +-
 drivers/rtc/rtc-sun6i.c                            |  14 +-
 drivers/scsi/device_handler/scsi_dh_alua.c         |   3 +-
 drivers/scsi/qla2xxx/qla_target.c                  |   3 +
 drivers/scsi/ufs/ufshpb.c                          |  19 +-
 drivers/usb/gadget/legacy/raw_gadget.c             |   2 +
 drivers/vhost/net.c                                |  15 +-
 drivers/vhost/vdpa.c                               |   5 +-
 drivers/video/fbdev/core/fbmem.c                   |   5 +-
 drivers/video/fbdev/core/fbsysfs.c                 |   4 +
 drivers/watchdog/sp5100_tco.c                      | 334 ++++++++++++++-------
 drivers/watchdog/sp5100_tco.h                      |   7 +
 fs/afs/inode.c                                     |  14 +-
 fs/gfs2/file.c                                     |   4 +-
 fs/io_uring.c                                      |   7 -
 fs/ioctl.c                                         |   2 +-
 fs/nilfs2/btnode.c                                 |  23 +-
 fs/nilfs2/btnode.h                                 |   1 +
 fs/nilfs2/btree.c                                  |  27 +-
 fs/nilfs2/dat.c                                    |   4 +-
 fs/nilfs2/gcinode.c                                |   7 +-
 fs/nilfs2/inode.c                                  | 159 +++++++++-
 fs/nilfs2/mdt.c                                    |  43 ++-
 fs/nilfs2/mdt.h                                    |   6 +-
 fs/nilfs2/nilfs.h                                  |  16 +-
 fs/nilfs2/page.c                                   |   7 +-
 fs/nilfs2/segment.c                                |   9 +-
 fs/nilfs2/super.c                                  |   5 +-
 include/linux/ceph/osd_client.h                    |   3 +
 include/linux/ioport.h                             |   2 +
 include/linux/mc146818rtc.h                        |   2 +
 include/linux/netdevice.h                          |   2 +-
 include/net/ip.h                                   |   1 +
 include/net/netns/xfrm.h                           |   6 +-
 include/net/xfrm.h                                 |  58 ++--
 include/uapi/linux/dma-buf.h                       |   4 +-
 kernel/events/core.c                               |  14 +
 mm/kfence/core.c                                   |  11 +
 net/bridge/br_input.c                              |   7 +
 net/ceph/osd_client.c                              | 302 ++++++++-----------
 net/core/dev.c                                     |   2 +-
 net/core/skbuff.c                                  |   4 +-
 net/ipv4/route.c                                   |  23 +-
 net/key/af_key.c                                   |   6 +-
 net/mac80211/rx.c                                  |   3 +-
 net/mptcp/options.c                                |  40 ++-
 net/mptcp/pm_netlink.c                             |  13 -
 net/mptcp/protocol.c                               |   3 +
 net/mptcp/protocol.h                               |   5 +-
 net/mptcp/subflow.c                                | 103 +++++--
 net/netfilter/nf_flow_table_core.c                 |  80 ++---
 net/netfilter/nf_flow_table_ip.c                   |  19 ++
 net/netfilter/nft_flow_offload.c                   |  28 +-
 net/nfc/nci/data.c                                 |   2 +-
 net/nfc/nci/hci.c                                  |   4 +-
 net/sched/act_pedit.c                              |   4 +
 net/wireless/nl80211.c                             |  18 +-
 net/xfrm/xfrm_policy.c                             |  10 +-
 net/xfrm/xfrm_user.c                               |  43 ++-
 security/selinux/ss/hashtab.c                      |   3 +-
 sound/isa/wavefront/wavefront_synth.c              |   3 +-
 sound/pci/hda/patch_realtek.c                      |  17 +-
 sound/usb/quirks-table.h                           |   9 +
 tools/build/Makefile.feature                       |   1 +
 tools/build/feature/Makefile                       |   4 +
 .../test-libbpf-btf__load_from_kernel_by_id.c      |   7 +
 tools/perf/Makefile.config                         |   7 +
 tools/perf/arch/x86/util/perf_regs.c               |  12 +
 tools/perf/bench/numa.c                            |   2 +-
 tools/perf/util/bpf-event.c                        |   4 +-
 tools/testing/selftests/net/fcnal-test.sh          |  12 +
 tools/virtio/Makefile                              |   3 +-
 166 files changed, 1925 insertions(+), 1083 deletions(-)

[PATCH 5.15 001/132] usb: gadget: fix race when gadget driver register via ioctl

[Greg Kroah-Hartman]

From: Schspa Shi <schspa@gmail.com>

commit 5f0b5f4d50fa0faa8c76ef9d42a42e8d43f98b44 upstream.

The usb_gadget_register_driver can be called multi time by to
threads via USB_RAW_IOCTL_RUN ioctl syscall, which will lead
to multiple registrations.

Call trace:
  driver_register+0x220/0x3a0 drivers/base/driver.c:171
  usb_gadget_register_driver_owner+0xfb/0x1e0
    drivers/usb/gadget/udc/core.c:1546
  raw_ioctl_run drivers/usb/gadget/legacy/raw_gadget.c:513 [inline]
  raw_ioctl+0x1883/0x2730 drivers/usb/gadget/legacy/raw_gadget.c:1220
  ioctl USB_RAW_IOCTL_RUN

This routine allows two processes to register the same driver instance
via ioctl syscall. which lead to a race condition.

Please refer to the following scenarios.

           T1                                  T2
------------------------------------------------------------------
usb_gadget_register_driver_owner
  driver_register                    driver_register
    driver_find                       driver_find
    bus_add_driver                    bus_add_driver
      priv alloced                     <context switch>
      drv->p = priv;
      <schedule out>
      kobject_init_and_add // refcount = 1;
   //couldn't find an available UDC or it's busy
   <context switch>
                                       priv alloced
                                       drv->priv = priv;
                                       kobject_init_and_add
                                         ---> refcount = 1 <------
                                       // register success
                                       <context switch>
===================== another ioctl/process ======================
                                      driver_register
                                       driver_find
                                        k = kset_find_obj()
                                         ---> refcount = 2 <------
                                        <context out>
   driver_unregister
   // drv->p become T2's priv
   ---> refcount = 1 <------
   <context switch>
                                        kobject_put(k)
                                         ---> refcount = 0 <------
                                        return priv->driver;
                                        --------UAF here----------

There will be UAF in this scenario.

We can fix it by adding a new STATE_DEV_REGISTERING device state to
avoid double register.

Reported-by: syzbot+dc7c3ca638e773db07f6@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000e66c2805de55b15a@google.com/
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Schspa Shi <schspa@gmail.com>
Link: https://lore.kernel.org/r/20220508150247.38204-1-schspa@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/legacy/raw_gadget.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/legacy/raw_gadget.c
+++ b/drivers/usb/gadget/legacy/raw_gadget.c
@@ -145,6 +145,7 @@ enum dev_state {
 	STATE_DEV_INVALID = 0,
 	STATE_DEV_OPENED,
 	STATE_DEV_INITIALIZED,
+	STATE_DEV_REGISTERING,
 	STATE_DEV_RUNNING,
 	STATE_DEV_CLOSED,
 	STATE_DEV_FAILED
@@ -508,6 +509,7 @@ static int raw_ioctl_run(struct raw_dev
 		ret = -EINVAL;
 		goto out_unlock;
 	}
+	dev->state = STATE_DEV_REGISTERING;
 	spin_unlock_irqrestore(&dev->lock, flags);
 
 	ret = usb_gadget_probe_driver(&dev->driver);

[PATCH 5.15 002/132] io_uring: arm poll for non-nowait files

[Greg Kroah-Hartman]

From: Pavel Begunkov <asml.silence@gmail.com>

commit e74ead135bc4459f7d40b1f8edab1333a28b54e8 upstream.

Don't check if we can do nowait before arming apoll, there are several
reasons for that. First, we don't care much about files that don't
support nowait. Second, it may be useful -- we don't want to be taking
away extra workers from io-wq when it can go in some async. Even if it
will go through io-wq eventually, it make difference in the numbers of
workers actually used. And the last one, it's needed to clean nowait in
future commits.

[kernel test robot: fix unused-var]

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9d06f3cb2c8b686d970269a87986f154edb83043.1634425438.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/io_uring.c |    7 -------
 1 file changed, 7 deletions(-)

--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -5662,7 +5662,6 @@ static int io_arm_poll_handler(struct io
 	struct async_poll *apoll;
 	struct io_poll_table ipt;
 	__poll_t ret, mask = EPOLLONESHOT | POLLERR | POLLPRI;
-	int rw;
 
 	if (!req->file || !file_can_poll(req->file))
 		return IO_APOLL_ABORTED;
@@ -5672,7 +5671,6 @@ static int io_arm_poll_handler(struct io
 		return IO_APOLL_ABORTED;
 
 	if (def->pollin) {
-		rw = READ;
 		mask |= POLLIN | POLLRDNORM;
 
 		/* If reading from MSG_ERRQUEUE using recvmsg, ignore POLLIN */
@@ -5680,14 +5678,9 @@ static int io_arm_poll_handler(struct io
 		    (req->sr_msg.msg_flags & MSG_ERRQUEUE))
 			mask &= ~POLLIN;
 	} else {
-		rw = WRITE;
 		mask |= POLLOUT | POLLWRNORM;
 	}
 
-	/* if we can't nonblock try, then no point in arming a poll handler */
-	if (!io_file_supports_nowait(req, rw))
-		return IO_APOLL_ABORTED;
-
 	apoll = kmalloc(sizeof(*apoll), GFP_ATOMIC);
 	if (unlikely(!apoll))
 		return IO_APOLL_ABORTED;

[PATCH 5.15 003/132] floppy: use a statically allocated error counter

[Greg Kroah-Hartman]

From: Willy Tarreau <w@1wt.eu>

commit f71f01394f742fc4558b3f9f4c7ef4c4cf3b07c8 upstream.

Interrupt handler bad_flp_intr() may cause a UAF on the recently freed
request just to increment the error count.  There's no point keeping
that one in the request anyway, and since the interrupt handler uses a
static pointer to the error which cannot be kept in sync with the
pending request, better make it use a static error counter that's reset
for each new request.  This reset now happens when entering
redo_fd_request() for a new request via set_next_request().

One initial concern about a single error counter was that errors on one
floppy drive could be reported on another one, but this problem is not
real given that the driver uses a single drive at a time, as that
PC-compatible controllers also have this limitation by using shared
signals.  As such the error count is always for the "current" drive.

Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/block/floppy.c |   18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -509,8 +509,8 @@ static unsigned long fdc_busy;
 static DECLARE_WAIT_QUEUE_HEAD(fdc_wait);
 static DECLARE_WAIT_QUEUE_HEAD(command_done);
 
-/* Errors during formatting are counted here. */
-static int format_errors;
+/* errors encountered on the current (or last) request */
+static int floppy_errors;
 
 /* Format request descriptor. */
 static struct format_descr format_req;
@@ -530,7 +530,6 @@ static struct format_descr format_req;
 static char *floppy_track_buffer;
 static int max_buffer_sectors;
 
-static int *errors;
 typedef void (*done_f)(int);
 static const struct cont_t {
 	void (*interrupt)(void);
@@ -1455,7 +1454,7 @@ static int interpret_errors(void)
 			if (drive_params[current_drive].flags & FTD_MSG)
 				DPRINT("Over/Underrun - retrying\n");
 			bad = 0;
-		} else if (*errors >= drive_params[current_drive].max_errors.reporting) {
+		} else if (floppy_errors >= drive_params[current_drive].max_errors.reporting) {
 			print_errors();
 		}
 		if (reply_buffer[ST2] & ST2_WC || reply_buffer[ST2] & ST2_BC)
@@ -2095,7 +2094,7 @@ static void bad_flp_intr(void)
 		if (!next_valid_format(current_drive))
 			return;
 	}
-	err_count = ++(*errors);
+	err_count = ++floppy_errors;
 	INFBOUND(write_errors[current_drive].badness, err_count);
 	if (err_count > drive_params[current_drive].max_errors.abort)
 		cont->done(0);
@@ -2241,9 +2240,8 @@ static int do_format(int drive, struct f
 		return -EINVAL;
 	}
 	format_req = *tmp_format_req;
-	format_errors = 0;
 	cont = &format_cont;
-	errors = &format_errors;
+	floppy_errors = 0;
 	ret = wait_til_done(redo_format, true);
 	if (ret == -EINTR)
 		return -EINTR;
@@ -2761,10 +2759,11 @@ static int set_next_request(void)
 	current_req = list_first_entry_or_null(&floppy_reqs, struct request,
 					       queuelist);
 	if (current_req) {
-		current_req->error_count = 0;
+		floppy_errors = 0;
 		list_del_init(&current_req->queuelist);
+		return 1;
 	}
-	return current_req != NULL;
+	return 0;
 }
 
 /* Starts or continues processing request. Will automatically unlock the
@@ -2823,7 +2822,6 @@ do_request:
 		_floppy = floppy_type + drive_params[current_drive].autodetect[drive_state[current_drive].probed_format];
 	} else
 		probing = 0;
-	errors = &(current_req->error_count);
 	tmp = make_raw_rw_request();
 	if (tmp < 2) {
 		request_done(tmp);

[PATCH 5.15 004/132] kernel/resource: Introduce request_mem_region_muxed()

[Greg Kroah-Hartman]

From: Terry Bowman <terry.bowman@amd.com>

commit 27c196c7b73cb70bbed3a9df46563bab60e63415 upstream.

Support for requesting muxed memory region is implemented but not
currently callable as a macro. Add the request muxed memory
region macro.

MMIO memory accesses can be synchronized using request_mem_region() which
is already available. This call will return failure if the resource is
busy. The 'muxed' version of this macro will handle a busy resource by
using a wait queue to retry until the resource is available.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/ioport.h |    2 ++
 1 file changed, 2 insertions(+)

--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -262,6 +262,8 @@ resource_union(struct resource *r1, stru
 #define request_muxed_region(start,n,name)	__request_region(&ioport_resource, (start), (n), (name), IORESOURCE_MUXED)
 #define __request_mem_region(start,n,name, excl) __request_region(&iomem_resource, (start), (n), (name), excl)
 #define request_mem_region(start,n,name) __request_region(&iomem_resource, (start), (n), (name), 0)
+#define request_mem_region_muxed(start, n, name) \
+	__request_region(&iomem_resource, (start), (n), (name), IORESOURCE_MUXED)
 #define request_mem_region_exclusive(start,n,name) \
 	__request_region(&iomem_resource, (start), (n), (name), IORESOURCE_EXCLUSIVE)
 #define rename_region(region, newname) do { (region)->name = (newname); } while (0)

[PATCH 5.15 005/132] i2c: piix4: Replace hardcoded memory map size with a #define

[Greg Kroah-Hartman]

From: Terry Bowman <terry.bowman@amd.com>

commit 93102cb449780f7b4eecf713451627b78373ce49 upstream.

Replace number constant with #define to improve readability and
maintainability.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-piix4.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -77,6 +77,7 @@
 
 /* SB800 constants */
 #define SB800_PIIX4_SMB_IDX		0xcd6
+#define SB800_PIIX4_SMB_MAP_SIZE	2
 
 #define KERNCZ_IMC_IDX			0x3e
 #define KERNCZ_IMC_DATA			0x3f
@@ -290,7 +291,8 @@ static int piix4_setup_sb800(struct pci_
 	else
 		smb_en = (aux) ? 0x28 : 0x2c;
 
-	if (!request_muxed_region(SB800_PIIX4_SMB_IDX, 2, "sb800_piix4_smb")) {
+	if (!request_muxed_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE,
+				  "sb800_piix4_smb")) {
 		dev_err(&PIIX4_dev->dev,
 			"SMB base address index region 0x%x already in use.\n",
 			SB800_PIIX4_SMB_IDX);
@@ -302,7 +304,7 @@ static int piix4_setup_sb800(struct pci_
 	outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
 	smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
 
-	release_region(SB800_PIIX4_SMB_IDX, 2);
+	release_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE);
 
 	if (!smb_en) {
 		smb_en_status = smba_en_lo & 0x10;
@@ -371,7 +373,8 @@ static int piix4_setup_sb800(struct pci_
 			piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
 		}
 	} else {
-		if (!request_muxed_region(SB800_PIIX4_SMB_IDX, 2,
+		if (!request_muxed_region(SB800_PIIX4_SMB_IDX,
+					  SB800_PIIX4_SMB_MAP_SIZE,
 					  "sb800_piix4_smb")) {
 			release_region(piix4_smba, SMBIOSIZE);
 			return -EBUSY;
@@ -384,7 +387,7 @@ static int piix4_setup_sb800(struct pci_
 				       SB800_PIIX4_PORT_IDX;
 		piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
 		piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
-		release_region(SB800_PIIX4_SMB_IDX, 2);
+		release_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE);
 	}
 
 	dev_info(&PIIX4_dev->dev,
@@ -682,7 +685,8 @@ static s32 piix4_access_sb800(struct i2c
 	u8 port;
 	int retval;
 
-	if (!request_muxed_region(SB800_PIIX4_SMB_IDX, 2, "sb800_piix4_smb"))
+	if (!request_muxed_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE,
+				  "sb800_piix4_smb"))
 		return -EBUSY;
 
 	/* Request the SMBUS semaphore, avoid conflicts with the IMC */
@@ -758,7 +762,7 @@ static s32 piix4_access_sb800(struct i2c
 		piix4_imc_wakeup();
 
 release:
-	release_region(SB800_PIIX4_SMB_IDX, 2);
+	release_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE);
 	return retval;
 }
 

[PATCH 5.15 006/132] i2c: piix4: Move port I/O region request/release code into functions

[Greg Kroah-Hartman]

From: Terry Bowman <terry.bowman@amd.com>

commit a3325d225b00889f4b7fdb25d83033cae1048a92 upstream.

Move duplicated region request and release code into a function. Move is
in preparation for following MMIO changes.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
[wsa: added missing curly brace]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-piix4.c |   48 ++++++++++++++++++++++++++---------------
 1 file changed, 31 insertions(+), 17 deletions(-)

--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -165,6 +165,24 @@ struct i2c_piix4_adapdata {
 	u8 port;		/* Port number, shifted */
 };
 
+static int piix4_sb800_region_request(struct device *dev)
+{
+	if (!request_muxed_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE,
+				  "sb800_piix4_smb")) {
+		dev_err(dev,
+			"SMBus base address index region 0x%x already in use.\n",
+			SB800_PIIX4_SMB_IDX);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static void piix4_sb800_region_release(struct device *dev)
+{
+	release_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE);
+}
+
 static int piix4_setup(struct pci_dev *PIIX4_dev,
 		       const struct pci_device_id *id)
 {
@@ -270,6 +288,7 @@ static int piix4_setup_sb800(struct pci_
 	unsigned short piix4_smba;
 	u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status, port_sel;
 	u8 i2ccfg, i2ccfg_offset = 0x10;
+	int retval;
 
 	/* SB800 and later SMBus does not support forcing address */
 	if (force || force_addr) {
@@ -291,20 +310,16 @@ static int piix4_setup_sb800(struct pci_
 	else
 		smb_en = (aux) ? 0x28 : 0x2c;
 
-	if (!request_muxed_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE,
-				  "sb800_piix4_smb")) {
-		dev_err(&PIIX4_dev->dev,
-			"SMB base address index region 0x%x already in use.\n",
-			SB800_PIIX4_SMB_IDX);
-		return -EBUSY;
-	}
+	retval = piix4_sb800_region_request(&PIIX4_dev->dev);
+	if (retval)
+		return retval;
 
 	outb_p(smb_en, SB800_PIIX4_SMB_IDX);
 	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
 	outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
 	smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
 
-	release_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE);
+	piix4_sb800_region_release(&PIIX4_dev->dev);
 
 	if (!smb_en) {
 		smb_en_status = smba_en_lo & 0x10;
@@ -373,11 +388,10 @@ static int piix4_setup_sb800(struct pci_
 			piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
 		}
 	} else {
-		if (!request_muxed_region(SB800_PIIX4_SMB_IDX,
-					  SB800_PIIX4_SMB_MAP_SIZE,
-					  "sb800_piix4_smb")) {
+		retval = piix4_sb800_region_request(&PIIX4_dev->dev);
+		if (retval) {
 			release_region(piix4_smba, SMBIOSIZE);
-			return -EBUSY;
+			return retval;
 		}
 
 		outb_p(SB800_PIIX4_PORT_IDX_SEL, SB800_PIIX4_SMB_IDX);
@@ -387,7 +401,7 @@ static int piix4_setup_sb800(struct pci_
 				       SB800_PIIX4_PORT_IDX;
 		piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
 		piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
-		release_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE);
+		piix4_sb800_region_release(&PIIX4_dev->dev);
 	}
 
 	dev_info(&PIIX4_dev->dev,
@@ -685,9 +699,9 @@ static s32 piix4_access_sb800(struct i2c
 	u8 port;
 	int retval;
 
-	if (!request_muxed_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE,
-				  "sb800_piix4_smb"))
-		return -EBUSY;
+	retval = piix4_sb800_region_request(&adap->dev);
+	if (retval)
+		return retval;
 
 	/* Request the SMBUS semaphore, avoid conflicts with the IMC */
 	smbslvcnt  = inb_p(SMBSLVCNT);
@@ -762,7 +776,7 @@ static s32 piix4_access_sb800(struct i2c
 		piix4_imc_wakeup();
 
 release:
-	release_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE);
+	piix4_sb800_region_release(&adap->dev);
 	return retval;
 }
 

[PATCH 5.15 007/132] i2c: piix4: Move SMBus controller base address detect into function

[Greg Kroah-Hartman]

From: Terry Bowman <terry.bowman@amd.com>

commit 0a59a24e14e9b21dcbb6b8ea41422e2fdfa437fd upstream.

Move SMBus controller base address detection into function. Refactor
is in preparation for following MMIO changes.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-piix4.c |   69 ++++++++++++++++++++++++++---------------
 1 file changed, 44 insertions(+), 25 deletions(-)

--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -282,11 +282,51 @@ static int piix4_setup(struct pci_dev *P
 	return piix4_smba;
 }
 
+static int piix4_setup_sb800_smba(struct pci_dev *PIIX4_dev,
+				  u8 smb_en,
+				  u8 aux,
+				  u8 *smb_en_status,
+				  unsigned short *piix4_smba)
+{
+	u8 smba_en_lo;
+	u8 smba_en_hi;
+	int retval;
+
+	retval = piix4_sb800_region_request(&PIIX4_dev->dev);
+	if (retval)
+		return retval;
+
+	outb_p(smb_en, SB800_PIIX4_SMB_IDX);
+	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
+	outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
+	smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
+
+	piix4_sb800_region_release(&PIIX4_dev->dev);
+
+	if (!smb_en) {
+		*smb_en_status = smba_en_lo & 0x10;
+		*piix4_smba = smba_en_hi << 8;
+		if (aux)
+			*piix4_smba |= 0x20;
+	} else {
+		*smb_en_status = smba_en_lo & 0x01;
+		*piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
+	}
+
+	if (!*smb_en_status) {
+		dev_err(&PIIX4_dev->dev,
+			"SMBus Host Controller not enabled!\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 			     const struct pci_device_id *id, u8 aux)
 {
 	unsigned short piix4_smba;
-	u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status, port_sel;
+	u8 smb_en, smb_en_status, port_sel;
 	u8 i2ccfg, i2ccfg_offset = 0x10;
 	int retval;
 
@@ -310,33 +350,12 @@ static int piix4_setup_sb800(struct pci_
 	else
 		smb_en = (aux) ? 0x28 : 0x2c;
 
-	retval = piix4_sb800_region_request(&PIIX4_dev->dev);
+	retval = piix4_setup_sb800_smba(PIIX4_dev, smb_en, aux, &smb_en_status,
+					&piix4_smba);
+
 	if (retval)
 		return retval;
 
-	outb_p(smb_en, SB800_PIIX4_SMB_IDX);
-	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
-	outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
-	smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
-
-	piix4_sb800_region_release(&PIIX4_dev->dev);
-
-	if (!smb_en) {
-		smb_en_status = smba_en_lo & 0x10;
-		piix4_smba = smba_en_hi << 8;
-		if (aux)
-			piix4_smba |= 0x20;
-	} else {
-		smb_en_status = smba_en_lo & 0x01;
-		piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
-	}
-
-	if (!smb_en_status) {
-		dev_err(&PIIX4_dev->dev,
-			"SMBus Host Controller not enabled!\n");
-		return -ENODEV;
-	}
-
 	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
 		return -ENODEV;
 

[PATCH 5.15 008/132] i2c: piix4: Move SMBus port selection into function

[Greg Kroah-Hartman]

From: Terry Bowman <terry.bowman@amd.com>

commit fbafbd51bff52cb3a920fd98d4dae2a78dd433d0 upstream.

Move port selection code into a separate function. Refactor is in
preparation for following MMIO changes.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-piix4.c |   27 +++++++++++++++++----------
 1 file changed, 17 insertions(+), 10 deletions(-)

--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -698,6 +698,20 @@ static void piix4_imc_wakeup(void)
 	release_region(KERNCZ_IMC_IDX, 2);
 }
 
+static int piix4_sb800_port_sel(u8 port)
+{
+	u8 smba_en_lo, val;
+
+	outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX);
+	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
+
+	val = (smba_en_lo & ~piix4_port_mask_sb800) | port;
+	if (smba_en_lo != val)
+		outb_p(val, SB800_PIIX4_SMB_IDX + 1);
+
+	return (smba_en_lo & piix4_port_mask_sb800);
+}
+
 /*
  * Handles access to multiple SMBus ports on the SB800.
  * The port is selected by bits 2:1 of the smb_en register (0x2c).
@@ -714,8 +728,7 @@ static s32 piix4_access_sb800(struct i2c
 	unsigned short piix4_smba = adapdata->smba;
 	int retries = MAX_TIMEOUT;
 	int smbslvcnt;
-	u8 smba_en_lo;
-	u8 port;
+	u8 prev_port;
 	int retval;
 
 	retval = piix4_sb800_region_request(&adap->dev);
@@ -775,18 +788,12 @@ static s32 piix4_access_sb800(struct i2c
 		}
 	}
 
-	outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX);
-	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
-
-	port = adapdata->port;
-	if ((smba_en_lo & piix4_port_mask_sb800) != port)
-		outb_p((smba_en_lo & ~piix4_port_mask_sb800) | port,
-		       SB800_PIIX4_SMB_IDX + 1);
+	prev_port = piix4_sb800_port_sel(adapdata->port);
 
 	retval = piix4_access(adap, addr, flags, read_write,
 			      command, size, data);
 
-	outb_p(smba_en_lo, SB800_PIIX4_SMB_IDX + 1);
+	piix4_sb800_port_sel(prev_port);
 
 	/* Release the semaphore */
 	outb_p(smbslvcnt | 0x20, SMBSLVCNT);

[PATCH 5.15 009/132] i2c: piix4: Add EFCH MMIO support to region request and release

[Greg Kroah-Hartman]

From: Terry Bowman <terry.bowman@amd.com>

commit 7c148722d074c29fb998578eea5de3c14b9608c9 upstream.

EFCH cd6h/cd7h port I/O may no longer be available on later AMD
processors and it is recommended to use MMIO instead. Update the
request and release functions to support MMIO.

MMIO request/release and mmapping require details during cleanup.
Add a MMIO configuration structure containing resource and vaddress
details for mapping the region, accessing the region, and releasing
the region.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
[wsa: rebased after fixup in previous patch]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-piix4.c |   66 ++++++++++++++++++++++++++++++++++++-----
 1 file changed, 58 insertions(+), 8 deletions(-)

--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -98,6 +98,9 @@
 #define SB800_PIIX4_PORT_IDX_MASK_KERNCZ	0x18
 #define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ	3
 
+#define SB800_PIIX4_FCH_PM_ADDR			0xFED80300
+#define SB800_PIIX4_FCH_PM_SIZE			8
+
 /* insmod parameters */
 
 /* If force is set to anything different from 0, we forcibly enable the
@@ -156,6 +159,12 @@ static const char *piix4_main_port_names
 };
 static const char *piix4_aux_port_name_sb800 = " port 1";
 
+struct sb800_mmio_cfg {
+	void __iomem *addr;
+	struct resource *res;
+	bool use_mmio;
+};
+
 struct i2c_piix4_adapdata {
 	unsigned short smba;
 
@@ -163,10 +172,40 @@ struct i2c_piix4_adapdata {
 	bool sb800_main;
 	bool notify_imc;
 	u8 port;		/* Port number, shifted */
+	struct sb800_mmio_cfg mmio_cfg;
 };
 
-static int piix4_sb800_region_request(struct device *dev)
+static int piix4_sb800_region_request(struct device *dev,
+				      struct sb800_mmio_cfg *mmio_cfg)
 {
+	if (mmio_cfg->use_mmio) {
+		struct resource *res;
+		void __iomem *addr;
+
+		res = request_mem_region_muxed(SB800_PIIX4_FCH_PM_ADDR,
+					       SB800_PIIX4_FCH_PM_SIZE,
+					       "sb800_piix4_smb");
+		if (!res) {
+			dev_err(dev,
+				"SMBus base address memory region 0x%x already in use.\n",
+				SB800_PIIX4_FCH_PM_ADDR);
+			return -EBUSY;
+		}
+
+		addr = ioremap(SB800_PIIX4_FCH_PM_ADDR,
+			       SB800_PIIX4_FCH_PM_SIZE);
+		if (!addr) {
+			release_resource(res);
+			dev_err(dev, "SMBus base address mapping failed.\n");
+			return -ENOMEM;
+		}
+
+		mmio_cfg->res = res;
+		mmio_cfg->addr = addr;
+
+		return 0;
+	}
+
 	if (!request_muxed_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE,
 				  "sb800_piix4_smb")) {
 		dev_err(dev,
@@ -178,8 +217,15 @@ static int piix4_sb800_region_request(st
 	return 0;
 }
 
-static void piix4_sb800_region_release(struct device *dev)
+static void piix4_sb800_region_release(struct device *dev,
+				       struct sb800_mmio_cfg *mmio_cfg)
 {
+	if (mmio_cfg->use_mmio) {
+		iounmap(mmio_cfg->addr);
+		release_resource(mmio_cfg->res);
+		return;
+	}
+
 	release_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE);
 }
 
@@ -288,11 +334,13 @@ static int piix4_setup_sb800_smba(struct
 				  u8 *smb_en_status,
 				  unsigned short *piix4_smba)
 {
+	struct sb800_mmio_cfg mmio_cfg;
 	u8 smba_en_lo;
 	u8 smba_en_hi;
 	int retval;
 
-	retval = piix4_sb800_region_request(&PIIX4_dev->dev);
+	mmio_cfg.use_mmio = 0;
+	retval = piix4_sb800_region_request(&PIIX4_dev->dev, &mmio_cfg);
 	if (retval)
 		return retval;
 
@@ -301,7 +349,7 @@ static int piix4_setup_sb800_smba(struct
 	outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
 	smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
 
-	piix4_sb800_region_release(&PIIX4_dev->dev);
+	piix4_sb800_region_release(&PIIX4_dev->dev, &mmio_cfg);
 
 	if (!smb_en) {
 		*smb_en_status = smba_en_lo & 0x10;
@@ -328,6 +376,7 @@ static int piix4_setup_sb800(struct pci_
 	unsigned short piix4_smba;
 	u8 smb_en, smb_en_status, port_sel;
 	u8 i2ccfg, i2ccfg_offset = 0x10;
+	struct sb800_mmio_cfg mmio_cfg;
 	int retval;
 
 	/* SB800 and later SMBus does not support forcing address */
@@ -407,7 +456,8 @@ static int piix4_setup_sb800(struct pci_
 			piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
 		}
 	} else {
-		retval = piix4_sb800_region_request(&PIIX4_dev->dev);
+		mmio_cfg.use_mmio = 0;
+		retval = piix4_sb800_region_request(&PIIX4_dev->dev, &mmio_cfg);
 		if (retval) {
 			release_region(piix4_smba, SMBIOSIZE);
 			return retval;
@@ -420,7 +470,7 @@ static int piix4_setup_sb800(struct pci_
 				       SB800_PIIX4_PORT_IDX;
 		piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
 		piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
-		piix4_sb800_region_release(&PIIX4_dev->dev);
+		piix4_sb800_region_release(&PIIX4_dev->dev, &mmio_cfg);
 	}
 
 	dev_info(&PIIX4_dev->dev,
@@ -731,7 +781,7 @@ static s32 piix4_access_sb800(struct i2c
 	u8 prev_port;
 	int retval;
 
-	retval = piix4_sb800_region_request(&adap->dev);
+	retval = piix4_sb800_region_request(&adap->dev, &adapdata->mmio_cfg);
 	if (retval)
 		return retval;
 
@@ -802,7 +852,7 @@ static s32 piix4_access_sb800(struct i2c
 		piix4_imc_wakeup();
 
 release:
-	piix4_sb800_region_release(&adap->dev);
+	piix4_sb800_region_release(&adap->dev, &adapdata->mmio_cfg);
 	return retval;
 }
 

[PATCH 5.15 010/132] i2c: piix4: Add EFCH MMIO support to SMBus base address detect

[Greg Kroah-Hartman]

From: Terry Bowman <terry.bowman@amd.com>

commit 46967bc1ee93acd1d8953c87dc16f43de4076f93 upstream.

The EFCH SMBus controller's base address is determined using details in
FCH::PM::DECODEEN[smbusasfiobase] and FCH::PM::DECODEEN[smbusasfioen].These
register fields were accessed using cd6h/cd7h port I/O. cd6h/cd7h port I/O
is no longer available in later AMD processors. Change base address
detection to use MMIO instead of port I/O cd6h/cd7h.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-piix4.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -344,10 +344,15 @@ static int piix4_setup_sb800_smba(struct
 	if (retval)
 		return retval;
 
-	outb_p(smb_en, SB800_PIIX4_SMB_IDX);
-	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
-	outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
-	smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
+	if (mmio_cfg.use_mmio) {
+		smba_en_lo = ioread8(mmio_cfg.addr);
+		smba_en_hi = ioread8(mmio_cfg.addr + 1);
+	} else {
+		outb_p(smb_en, SB800_PIIX4_SMB_IDX);
+		smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
+		outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
+		smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
+	}
 
 	piix4_sb800_region_release(&PIIX4_dev->dev, &mmio_cfg);
 

[PATCH 5.15 011/132] i2c: piix4: Add EFCH MMIO support for SMBus port select

[Greg Kroah-Hartman]

From: Terry Bowman <terry.bowman@amd.com>

commit 381a3083c6747ae5cdbef9b176d57d1b966db49f upstream.

AMD processors include registers capable of selecting between 2 SMBus
ports. Port selection is made during each user access by writing to
FCH::PM::DECODEEN[smbus0sel]. Change the driver to use MMIO during
SMBus port selection because cd6h/cd7h port I/O is not available on
later AMD processors.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-piix4.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -753,10 +753,19 @@ static void piix4_imc_wakeup(void)
 	release_region(KERNCZ_IMC_IDX, 2);
 }
 
-static int piix4_sb800_port_sel(u8 port)
+static int piix4_sb800_port_sel(u8 port, struct sb800_mmio_cfg *mmio_cfg)
 {
 	u8 smba_en_lo, val;
 
+	if (mmio_cfg->use_mmio) {
+		smba_en_lo = ioread8(mmio_cfg->addr + piix4_port_sel_sb800);
+		val = (smba_en_lo & ~piix4_port_mask_sb800) | port;
+		if (smba_en_lo != val)
+			iowrite8(val, mmio_cfg->addr + piix4_port_sel_sb800);
+
+		return (smba_en_lo & piix4_port_mask_sb800);
+	}
+
 	outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX);
 	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
 
@@ -843,12 +852,12 @@ static s32 piix4_access_sb800(struct i2c
 		}
 	}
 
-	prev_port = piix4_sb800_port_sel(adapdata->port);
+	prev_port = piix4_sb800_port_sel(adapdata->port, &adapdata->mmio_cfg);
 
 	retval = piix4_access(adap, addr, flags, read_write,
 			      command, size, data);
 
-	piix4_sb800_port_sel(prev_port);
+	piix4_sb800_port_sel(prev_port, &adapdata->mmio_cfg);
 
 	/* Release the semaphore */
 	outb_p(smbslvcnt | 0x20, SMBSLVCNT);

[PATCH 5.15 012/132] i2c: piix4: Enable EFCH MMIO for Family 17h+

[Greg Kroah-Hartman]

From: Terry Bowman <terry.bowman@amd.com>

commit 6cf72f41808ab5db1d7718b999b3ff0166e67e45 upstream.

Enable EFCH MMIO using check for SMBus PCI revision ID value 0x51 or
greater. This PCI revision ID check will enable family 17h and future
AMD processors with the same EFCH SMBus controller HW.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-piix4.c |   17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -229,6 +229,18 @@ static void piix4_sb800_region_release(s
 	release_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE);
 }
 
+static bool piix4_sb800_use_mmio(struct pci_dev *PIIX4_dev)
+{
+	/*
+	 * cd6h/cd7h port I/O accesses can be disabled on AMD processors
+	 * w/ SMBus PCI revision ID 0x51 or greater. MMIO is supported on
+	 * the same processors and is the recommended access method.
+	 */
+	return (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
+		PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
+		PIIX4_dev->revision >= 0x51);
+}
+
 static int piix4_setup(struct pci_dev *PIIX4_dev,
 		       const struct pci_device_id *id)
 {
@@ -339,7 +351,7 @@ static int piix4_setup_sb800_smba(struct
 	u8 smba_en_hi;
 	int retval;
 
-	mmio_cfg.use_mmio = 0;
+	mmio_cfg.use_mmio = piix4_sb800_use_mmio(PIIX4_dev);
 	retval = piix4_sb800_region_request(&PIIX4_dev->dev, &mmio_cfg);
 	if (retval)
 		return retval;
@@ -461,7 +473,7 @@ static int piix4_setup_sb800(struct pci_
 			piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
 		}
 	} else {
-		mmio_cfg.use_mmio = 0;
+		mmio_cfg.use_mmio = piix4_sb800_use_mmio(PIIX4_dev);
 		retval = piix4_sb800_region_request(&PIIX4_dev->dev, &mmio_cfg);
 		if (retval) {
 			release_region(piix4_smba, SMBIOSIZE);
@@ -944,6 +956,7 @@ static int piix4_add_adapter(struct pci_
 		return -ENOMEM;
 	}
 
+	adapdata->mmio_cfg.use_mmio = piix4_sb800_use_mmio(dev);
 	adapdata->smba = smba;
 	adapdata->sb800_main = sb800_main;
 	adapdata->port = port << piix4_port_shift_sb800;

[PATCH 5.15 013/132] Watchdog: sp5100_tco: Move timer initialization into function

[Greg Kroah-Hartman]

From: Terry Bowman <terry.bowman@amd.com>

commit abd71a948f7aab47ca49d3e7fe6afa6c48c8aae0 upstream.

Refactor driver's timer initialization into new function. This is needed
inorder to support adding new device layouts while using common timer
initialization.

Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-2-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/watchdog/sp5100_tco.c |   65 +++++++++++++++++++++++-------------------
 1 file changed, 36 insertions(+), 29 deletions(-)

--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -215,6 +215,41 @@ static u32 sp5100_tco_read_pm_reg32(u8 i
 	return val;
 }
 
+static int sp5100_tco_timer_init(struct sp5100_tco *tco)
+{
+	struct watchdog_device *wdd = &tco->wdd;
+	struct device *dev = wdd->parent;
+	u32 val;
+
+	val = readl(SP5100_WDT_CONTROL(tco->tcobase));
+	if (val & SP5100_WDT_DISABLED) {
+		dev_err(dev, "Watchdog hardware is disabled\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Save WatchDogFired status, because WatchDogFired flag is
+	 * cleared here.
+	 */
+	if (val & SP5100_WDT_FIRED)
+		wdd->bootstatus = WDIOF_CARDRESET;
+
+	/* Set watchdog action to reset the system */
+	val &= ~SP5100_WDT_ACTION_RESET;
+	writel(val, SP5100_WDT_CONTROL(tco->tcobase));
+
+	/* Set a reasonable heartbeat before we stop the timer */
+	tco_timer_set_timeout(wdd, wdd->timeout);
+
+	/*
+	 * Stop the TCO before we change anything so we don't race with
+	 * a zeroed timer.
+	 */
+	tco_timer_stop(wdd);
+
+	return 0;
+}
+
 static int sp5100_tco_setupdevice(struct device *dev,
 				  struct watchdog_device *wdd)
 {
@@ -340,35 +375,7 @@ static int sp5100_tco_setupdevice(struct
 	/* Setup the watchdog timer */
 	tco_timer_enable(tco);
 
-	val = readl(SP5100_WDT_CONTROL(tco->tcobase));
-	if (val & SP5100_WDT_DISABLED) {
-		dev_err(dev, "Watchdog hardware is disabled\n");
-		ret = -ENODEV;
-		goto unreg_region;
-	}
-
-	/*
-	 * Save WatchDogFired status, because WatchDogFired flag is
-	 * cleared here.
-	 */
-	if (val & SP5100_WDT_FIRED)
-		wdd->bootstatus = WDIOF_CARDRESET;
-	/* Set watchdog action to reset the system */
-	val &= ~SP5100_WDT_ACTION_RESET;
-	writel(val, SP5100_WDT_CONTROL(tco->tcobase));
-
-	/* Set a reasonable heartbeat before we stop the timer */
-	tco_timer_set_timeout(wdd, wdd->timeout);
-
-	/*
-	 * Stop the TCO before we change anything so we don't race with
-	 * a zeroed timer.
-	 */
-	tco_timer_stop(wdd);
-
-	release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
-
-	return 0;
+	ret = sp5100_tco_timer_init(tco);
 
 unreg_region:
 	release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);

[PATCH 5.15 014/132] Watchdog: sp5100_tco: Refactor MMIO base address initialization

[Greg Kroah-Hartman]

From: Terry Bowman <terry.bowman@amd.com>

commit 1f182aca230086d4a4469c0f9136a6ea762d6385 upstream.

Combine MMIO base address and alternate base address detection. Combine
based on layout type. This will simplify the function by eliminating
a switch case.

Move existing request/release code into functions. This currently only
supports port I/O request/release. The move into a separate function
will make it ready for adding MMIO region support.

Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-3-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/watchdog/sp5100_tco.c |  155 +++++++++++++++++++++---------------------
 drivers/watchdog/sp5100_tco.h |    1 
 2 files changed, 82 insertions(+), 74 deletions(-)

--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -215,6 +215,55 @@ static u32 sp5100_tco_read_pm_reg32(u8 i
 	return val;
 }
 
+static u32 sp5100_tco_request_region(struct device *dev,
+				     u32 mmio_addr,
+				     const char *dev_name)
+{
+	if (!devm_request_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE,
+				     dev_name)) {
+		dev_dbg(dev, "MMIO address 0x%08x already in use\n", mmio_addr);
+		return 0;
+	}
+
+	return mmio_addr;
+}
+
+static u32 sp5100_tco_prepare_base(struct sp5100_tco *tco,
+				   u32 mmio_addr,
+				   u32 alt_mmio_addr,
+				   const char *dev_name)
+{
+	struct device *dev = tco->wdd.parent;
+
+	dev_dbg(dev, "Got 0x%08x from SBResource_MMIO register\n", mmio_addr);
+
+	if (!mmio_addr && !alt_mmio_addr)
+		return -ENODEV;
+
+	/* Check for MMIO address and alternate MMIO address conflicts */
+	if (mmio_addr)
+		mmio_addr = sp5100_tco_request_region(dev, mmio_addr, dev_name);
+
+	if (!mmio_addr && alt_mmio_addr)
+		mmio_addr = sp5100_tco_request_region(dev, alt_mmio_addr, dev_name);
+
+	if (!mmio_addr) {
+		dev_err(dev, "Failed to reserve MMIO or alternate MMIO region\n");
+		return -EBUSY;
+	}
+
+	tco->tcobase = devm_ioremap(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
+	if (!tco->tcobase) {
+		dev_err(dev, "MMIO address 0x%08x failed mapping\n", mmio_addr);
+		devm_release_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
+		return -ENOMEM;
+	}
+
+	dev_info(dev, "Using 0x%08x for watchdog MMIO address\n", mmio_addr);
+
+	return 0;
+}
+
 static int sp5100_tco_timer_init(struct sp5100_tco *tco)
 {
 	struct watchdog_device *wdd = &tco->wdd;
@@ -256,6 +305,7 @@ static int sp5100_tco_setupdevice(struct
 	struct sp5100_tco *tco = watchdog_get_drvdata(wdd);
 	const char *dev_name;
 	u32 mmio_addr = 0, val;
+	u32 alt_mmio_addr = 0;
 	int ret;
 
 	/* Request the IO ports used by this driver */
@@ -274,11 +324,32 @@ static int sp5100_tco_setupdevice(struct
 		dev_name = SP5100_DEVNAME;
 		mmio_addr = sp5100_tco_read_pm_reg32(SP5100_PM_WATCHDOG_BASE) &
 								0xfffffff8;
+
+		/*
+		 * Secondly, find the watchdog timer MMIO address
+		 * from SBResource_MMIO register.
+		 */
+
+		/* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
+		pci_read_config_dword(sp5100_tco_pci,
+				      SP5100_SB_RESOURCE_MMIO_BASE,
+				      &val);
+
+		/* Verify MMIO is enabled and using bar0 */
+		if ((val & SB800_ACPI_MMIO_MASK) == SB800_ACPI_MMIO_DECODE_EN)
+			alt_mmio_addr = (val & ~0xfff) + SB800_PM_WDT_MMIO_OFFSET;
 		break;
 	case sb800:
 		dev_name = SB800_DEVNAME;
 		mmio_addr = sp5100_tco_read_pm_reg32(SB800_PM_WATCHDOG_BASE) &
 								0xfffffff8;
+
+		/* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
+		val = sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
+
+		/* Verify MMIO is enabled and using bar0 */
+		if ((val & SB800_ACPI_MMIO_MASK) == SB800_ACPI_MMIO_DECODE_EN)
+			alt_mmio_addr = (val & ~0xfff) + SB800_PM_WDT_MMIO_OFFSET;
 		break;
 	case efch:
 		dev_name = SB800_DEVNAME;
@@ -297,87 +368,23 @@ static int sp5100_tco_setupdevice(struct
 		val = sp5100_tco_read_pm_reg8(EFCH_PM_DECODEEN);
 		if (val & EFCH_PM_DECODEEN_WDT_TMREN)
 			mmio_addr = EFCH_PM_WDT_ADDR;
+
+		val = sp5100_tco_read_pm_reg8(EFCH_PM_ISACONTROL);
+		if (val & EFCH_PM_ISACONTROL_MMIOEN)
+			alt_mmio_addr = EFCH_PM_ACPI_MMIO_ADDR +
+				EFCH_PM_ACPI_MMIO_WDT_OFFSET;
 		break;
 	default:
 		return -ENODEV;
 	}
 
-	/* Check MMIO address conflict */
-	if (!mmio_addr ||
-	    !devm_request_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE,
-				     dev_name)) {
-		if (mmio_addr)
-			dev_dbg(dev, "MMIO address 0x%08x already in use\n",
-				mmio_addr);
-		switch (tco->tco_reg_layout) {
-		case sp5100:
-			/*
-			 * Secondly, Find the watchdog timer MMIO address
-			 * from SBResource_MMIO register.
-			 */
-			/* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
-			pci_read_config_dword(sp5100_tco_pci,
-					      SP5100_SB_RESOURCE_MMIO_BASE,
-					      &mmio_addr);
-			if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN |
-					  SB800_ACPI_MMIO_SEL)) !=
-						  SB800_ACPI_MMIO_DECODE_EN) {
-				ret = -ENODEV;
-				goto unreg_region;
-			}
-			mmio_addr &= ~0xFFF;
-			mmio_addr += SB800_PM_WDT_MMIO_OFFSET;
-			break;
-		case sb800:
-			/* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
-			mmio_addr =
-				sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
-			if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN |
-					  SB800_ACPI_MMIO_SEL)) !=
-						  SB800_ACPI_MMIO_DECODE_EN) {
-				ret = -ENODEV;
-				goto unreg_region;
-			}
-			mmio_addr &= ~0xFFF;
-			mmio_addr += SB800_PM_WDT_MMIO_OFFSET;
-			break;
-		case efch:
-			val = sp5100_tco_read_pm_reg8(EFCH_PM_ISACONTROL);
-			if (!(val & EFCH_PM_ISACONTROL_MMIOEN)) {
-				ret = -ENODEV;
-				goto unreg_region;
-			}
-			mmio_addr = EFCH_PM_ACPI_MMIO_ADDR +
-				    EFCH_PM_ACPI_MMIO_WDT_OFFSET;
-			break;
-		}
-		dev_dbg(dev, "Got 0x%08x from SBResource_MMIO register\n",
-			mmio_addr);
-		if (!devm_request_mem_region(dev, mmio_addr,
-					     SP5100_WDT_MEM_MAP_SIZE,
-					     dev_name)) {
-			dev_dbg(dev, "MMIO address 0x%08x already in use\n",
-				mmio_addr);
-			ret = -EBUSY;
-			goto unreg_region;
-		}
+	ret = sp5100_tco_prepare_base(tco, mmio_addr, alt_mmio_addr, dev_name);
+	if (!ret) {
+		/* Setup the watchdog timer */
+		tco_timer_enable(tco);
+		ret = sp5100_tco_timer_init(tco);
 	}
 
-	tco->tcobase = devm_ioremap(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
-	if (!tco->tcobase) {
-		dev_err(dev, "failed to get tcobase address\n");
-		ret = -ENOMEM;
-		goto unreg_region;
-	}
-
-	dev_info(dev, "Using 0x%08x for watchdog MMIO address\n", mmio_addr);
-
-	/* Setup the watchdog timer */
-	tco_timer_enable(tco);
-
-	ret = sp5100_tco_timer_init(tco);
-
-unreg_region:
 	release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
 	return ret;
 }
--- a/drivers/watchdog/sp5100_tco.h
+++ b/drivers/watchdog/sp5100_tco.h
@@ -58,6 +58,7 @@
 #define SB800_PM_WATCHDOG_SECOND_RES	GENMASK(1, 0)
 #define SB800_ACPI_MMIO_DECODE_EN	BIT(0)
 #define SB800_ACPI_MMIO_SEL		BIT(1)
+#define SB800_ACPI_MMIO_MASK		GENMASK(1, 0)
 
 #define SB800_PM_WDT_MMIO_OFFSET	0xB00
 

[PATCH 5.15 015/132] Watchdog: sp5100_tco: Add initialization using EFCH MMIO

[Greg Kroah-Hartman]

From: Terry Bowman <terry.bowman@amd.com>

commit 0578fff4aae5bce3f09875f58e68e9ffbab8daf5 upstream.

cd6h/cd7h port I/O can be disabled on recent AMD hardware. Read
accesses to disabled cd6h/cd7h port I/O will return F's and written
data is dropped. It is recommended to replace the cd6h/cd7h
port I/O with MMIO.

Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-4-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/watchdog/sp5100_tco.c |  100 +++++++++++++++++++++++++++++++++++++++++-
 drivers/watchdog/sp5100_tco.h |    5 ++
 2 files changed, 104 insertions(+), 1 deletion(-)

--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -48,7 +48,7 @@
 /* internal variables */
 
 enum tco_reg_layout {
-	sp5100, sb800, efch
+	sp5100, sb800, efch, efch_mmio
 };
 
 struct sp5100_tco {
@@ -201,6 +201,8 @@ static void tco_timer_enable(struct sp51
 					  ~EFCH_PM_WATCHDOG_DISABLE,
 					  EFCH_PM_DECODEEN_SECOND_RES);
 		break;
+	default:
+		break;
 	}
 }
 
@@ -299,6 +301,99 @@ static int sp5100_tco_timer_init(struct
 	return 0;
 }
 
+static u8 efch_read_pm_reg8(void __iomem *addr, u8 index)
+{
+	return readb(addr + index);
+}
+
+static void efch_update_pm_reg8(void __iomem *addr, u8 index, u8 reset, u8 set)
+{
+	u8 val;
+
+	val = readb(addr + index);
+	val &= reset;
+	val |= set;
+	writeb(val, addr + index);
+}
+
+static void tco_timer_enable_mmio(void __iomem *addr)
+{
+	efch_update_pm_reg8(addr, EFCH_PM_DECODEEN3,
+			    ~EFCH_PM_WATCHDOG_DISABLE,
+			    EFCH_PM_DECODEEN_SECOND_RES);
+}
+
+static int sp5100_tco_setupdevice_mmio(struct device *dev,
+				       struct watchdog_device *wdd)
+{
+	struct sp5100_tco *tco = watchdog_get_drvdata(wdd);
+	const char *dev_name = SB800_DEVNAME;
+	u32 mmio_addr = 0, alt_mmio_addr = 0;
+	struct resource *res;
+	void __iomem *addr;
+	int ret;
+	u32 val;
+
+	res = request_mem_region_muxed(EFCH_PM_ACPI_MMIO_PM_ADDR,
+				       EFCH_PM_ACPI_MMIO_PM_SIZE,
+				       "sp5100_tco");
+
+	if (!res) {
+		dev_err(dev,
+			"Memory region 0x%08x already in use\n",
+			EFCH_PM_ACPI_MMIO_PM_ADDR);
+		return -EBUSY;
+	}
+
+	addr = ioremap(EFCH_PM_ACPI_MMIO_PM_ADDR, EFCH_PM_ACPI_MMIO_PM_SIZE);
+	if (!addr) {
+		dev_err(dev, "Address mapping failed\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/*
+	 * EFCH_PM_DECODEEN_WDT_TMREN is dual purpose. This bitfield
+	 * enables sp5100_tco register MMIO space decoding. The bitfield
+	 * also starts the timer operation. Enable if not already enabled.
+	 */
+	val = efch_read_pm_reg8(addr, EFCH_PM_DECODEEN);
+	if (!(val & EFCH_PM_DECODEEN_WDT_TMREN)) {
+		efch_update_pm_reg8(addr, EFCH_PM_DECODEEN, 0xff,
+				    EFCH_PM_DECODEEN_WDT_TMREN);
+	}
+
+	/* Error if the timer could not be enabled */
+	val = efch_read_pm_reg8(addr, EFCH_PM_DECODEEN);
+	if (!(val & EFCH_PM_DECODEEN_WDT_TMREN)) {
+		dev_err(dev, "Failed to enable the timer\n");
+		ret = -EFAULT;
+		goto out;
+	}
+
+	mmio_addr = EFCH_PM_WDT_ADDR;
+
+	/* Determine alternate MMIO base address */
+	val = efch_read_pm_reg8(addr, EFCH_PM_ISACONTROL);
+	if (val & EFCH_PM_ISACONTROL_MMIOEN)
+		alt_mmio_addr = EFCH_PM_ACPI_MMIO_ADDR +
+			EFCH_PM_ACPI_MMIO_WDT_OFFSET;
+
+	ret = sp5100_tco_prepare_base(tco, mmio_addr, alt_mmio_addr, dev_name);
+	if (!ret) {
+		tco_timer_enable_mmio(addr);
+		ret = sp5100_tco_timer_init(tco);
+	}
+
+out:
+	if (addr)
+		iounmap(addr);
+
+	release_resource(res);
+
+	return ret;
+}
+
 static int sp5100_tco_setupdevice(struct device *dev,
 				  struct watchdog_device *wdd)
 {
@@ -308,6 +403,9 @@ static int sp5100_tco_setupdevice(struct
 	u32 alt_mmio_addr = 0;
 	int ret;
 
+	if (tco->tco_reg_layout == efch_mmio)
+		return sp5100_tco_setupdevice_mmio(dev, wdd);
+
 	/* Request the IO ports used by this driver */
 	if (!request_muxed_region(SP5100_IO_PM_INDEX_REG,
 				  SP5100_PM_IOPORTS_SIZE, "sp5100_tco")) {
--- a/drivers/watchdog/sp5100_tco.h
+++ b/drivers/watchdog/sp5100_tco.h
@@ -83,4 +83,9 @@
 #define EFCH_PM_ISACONTROL_MMIOEN	BIT(1)
 
 #define EFCH_PM_ACPI_MMIO_ADDR		0xfed80000
+#define EFCH_PM_ACPI_MMIO_PM_OFFSET	0x00000300
 #define EFCH_PM_ACPI_MMIO_WDT_OFFSET	0x00000b00
+
+#define EFCH_PM_ACPI_MMIO_PM_ADDR	(EFCH_PM_ACPI_MMIO_ADDR +	\
+					 EFCH_PM_ACPI_MMIO_PM_OFFSET)
+#define EFCH_PM_ACPI_MMIO_PM_SIZE	8

[PATCH 5.15 016/132] Watchdog: sp5100_tco: Enable Family 17h+ CPUs

[Greg Kroah-Hartman]

From: Terry Bowman <terry.bowman@amd.com>

commit 826270373f17fd8ebd10753ca0a5fd2ceb1dc38e upstream.

The driver currently uses a CPU family match of 17h to determine
EFCH_PM_DECODEEN_WDT_TMREN register support. This family check will not
support future AMD CPUs and instead will require driver updates to add
support.

Remove the family 17h family check and add a check for SMBus PCI
revision ID 0x51 or greater. The MMIO access method has been available
since at least SMBus controllers using PCI revision 0x51. This revision
check will support family 17h and future AMD processors including EFCH
functionality without requiring driver changes.

Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-5-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Mario Limonciello <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/watchdog/sp5100_tco.c |   16 ++++------------
 drivers/watchdog/sp5100_tco.h |    1 +
 2 files changed, 5 insertions(+), 12 deletions(-)

--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -86,6 +86,10 @@ static enum tco_reg_layout tco_reg_layou
 	    dev->revision < 0x40) {
 		return sp5100;
 	} else if (dev->vendor == PCI_VENDOR_ID_AMD &&
+	    sp5100_tco_pci->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
+	    sp5100_tco_pci->revision >= AMD_ZEN_SMBUS_PCI_REV) {
+		return efch_mmio;
+	} else if (dev->vendor == PCI_VENDOR_ID_AMD &&
 	    ((dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
 	     dev->revision >= 0x41) ||
 	    (dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
@@ -451,18 +455,6 @@ static int sp5100_tco_setupdevice(struct
 		break;
 	case efch:
 		dev_name = SB800_DEVNAME;
-		/*
-		 * On Family 17h devices, the EFCH_PM_DECODEEN_WDT_TMREN bit of
-		 * EFCH_PM_DECODEEN not only enables the EFCH_PM_WDT_ADDR memory
-		 * region, it also enables the watchdog itself.
-		 */
-		if (boot_cpu_data.x86 == 0x17) {
-			val = sp5100_tco_read_pm_reg8(EFCH_PM_DECODEEN);
-			if (!(val & EFCH_PM_DECODEEN_WDT_TMREN)) {
-				sp5100_tco_update_pm_reg8(EFCH_PM_DECODEEN, 0xff,
-							  EFCH_PM_DECODEEN_WDT_TMREN);
-			}
-		}
 		val = sp5100_tco_read_pm_reg8(EFCH_PM_DECODEEN);
 		if (val & EFCH_PM_DECODEEN_WDT_TMREN)
 			mmio_addr = EFCH_PM_WDT_ADDR;
--- a/drivers/watchdog/sp5100_tco.h
+++ b/drivers/watchdog/sp5100_tco.h
@@ -89,3 +89,4 @@
 #define EFCH_PM_ACPI_MMIO_PM_ADDR	(EFCH_PM_ACPI_MMIO_ADDR +	\
 					 EFCH_PM_ACPI_MMIO_PM_OFFSET)
 #define EFCH_PM_ACPI_MMIO_PM_SIZE	8
+#define AMD_ZEN_SMBUS_PCI_REV		0x51

[PATCH 5.15 017/132] mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool

[Greg Kroah-Hartman]

From: Hyeonggon Yoo <42.hyeyoo@gmail.com>

commit 2839b0999c20c9f6bf353849c69370e121e2fa1a upstream.

When kfence fails to initialize kfence pool, it frees the pool.  But it
does not reset memcg_data and PG_slab flag.

Below is a BUG because of this. Let's fix it by resetting memcg_data
and PG_slab flag before free.

[    0.089149] BUG: Bad page state in process swapper/0  pfn:3d8e06
[    0.089149] page:ffffea46cf638180 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x3d8e06
[    0.089150] memcg:ffffffff94a475d1
[    0.089150] flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff)
[    0.089151] raw: 0017ffffc0000200 ffffea46cf638188 ffffea46cf638188 0000000000000000
[    0.089152] raw: 0000000000000000 0000000000000000 00000000ffffffff ffffffff94a475d1
[    0.089152] page dumped because: page still charged to cgroup
[    0.089153] Modules linked in:
[    0.089153] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G    B   W         5.18.0-rc1+ #965
[    0.089154] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[    0.089154] Call Trace:
[    0.089155]  <TASK>
[    0.089155]  dump_stack_lvl+0x49/0x5f
[    0.089157]  dump_stack+0x10/0x12
[    0.089158]  bad_page.cold+0x63/0x94
[    0.089159]  check_free_page_bad+0x66/0x70
[    0.089160]  __free_pages_ok+0x423/0x530
[    0.089161]  __free_pages_core+0x8e/0xa0
[    0.089162]  memblock_free_pages+0x10/0x12
[    0.089164]  memblock_free_late+0x8f/0xb9
[    0.089165]  kfence_init+0x68/0x92
[    0.089166]  start_kernel+0x789/0x992
[    0.089167]  x86_64_start_reservations+0x24/0x26
[    0.089168]  x86_64_start_kernel+0xa9/0xaf
[    0.089170]  secondary_startup_64_no_verify+0xd5/0xdb
[    0.089171]  </TASK>

Link: https://lkml.kernel.org/r/YnPG3pQrqfcgOlVa@hyeyoo
Fixes: 0ce20dd84089 ("mm: add Kernel Electric-Fence infrastructure")
Fixes: 8f0b36497303 ("mm: kfence: fix objcgs vector allocation")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[42.hyeyoo@gmail.com: backport - use struct page]
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/kfence/core.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/mm/kfence/core.c
+++ b/mm/kfence/core.c
@@ -510,6 +510,7 @@ static bool __init kfence_init_pool(void
 	unsigned long addr = (unsigned long)__kfence_pool;
 	struct page *pages;
 	int i;
+	char *p;
 
 	if (!__kfence_pool)
 		return false;
@@ -592,6 +593,16 @@ err:
 	 * fails for the first page, and therefore expect addr==__kfence_pool in
 	 * most failure cases.
 	 */
+	for (p = (char *)addr; p < __kfence_pool + KFENCE_POOL_SIZE; p += PAGE_SIZE) {
+		struct page *page = virt_to_page(p);
+
+		if (!PageSlab(page))
+			continue;
+#ifdef CONFIG_MEMCG
+		page->memcg_data = 0;
+#endif
+		__ClearPageSlab(page);
+	}
 	memblock_free_late(__pa(addr), KFENCE_POOL_SIZE - (addr - (unsigned long)__kfence_pool));
 	__kfence_pool = NULL;
 	return false;

[PATCH 5.15 018/132] Revert "drm/i915/opregion: check port number bounds for SWSCI display power state"

[Greg Kroah-Hartman]

From: Greg Thelen <gthelen@google.com>

This reverts commit b84857c06ef9e72d09fadafdbb3ce9af64af954f.

5.10 stable contains 2 identical commits:
1. commit eb7bf11e8ef1 ("drm/i915/opregion: check port number bounds for SWSCI display power state")
2. commit b84857c06ef9 ("drm/i915/opregion: check port number bounds for SWSCI display power state")

Both commits add separate checks for the same condition. Revert the 2nd
redundant check to match upstream, which only has one check.

Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/display/intel_opregion.c |   15 ---------------
 1 file changed, 15 deletions(-)

--- a/drivers/gpu/drm/i915/display/intel_opregion.c
+++ b/drivers/gpu/drm/i915/display/intel_opregion.c
@@ -376,21 +376,6 @@ int intel_opregion_notify_encoder(struct
 		return -EINVAL;
 	}
 
-	/*
-	 * The port numbering and mapping here is bizarre. The now-obsolete
-	 * swsci spec supports ports numbered [0..4]. Port E is handled as a
-	 * special case, but port F and beyond are not. The functionality is
-	 * supposed to be obsolete for new platforms. Just bail out if the port
-	 * number is out of bounds after mapping.
-	 */
-	if (port > 4) {
-		drm_dbg_kms(&dev_priv->drm,
-			    "[ENCODER:%d:%s] port %c (index %u) out of bounds for display power state notification\n",
-			    intel_encoder->base.base.id, intel_encoder->base.name,
-			    port_name(intel_encoder->port), port);
-		return -EINVAL;
-	}
-
 	if (!enable)
 		parm |= 4 << 8;
 

[PATCH 5.15 019/132] rtc: fix use-after-free on device removal

[Greg Kroah-Hartman]

From: Vincent Whitchurch <vincent.whitchurch@axis.com>

[ Upstream commit c8fa17d9f08a448184f03d352145099b5beb618e ]

If the irqwork is still scheduled or running while the RTC device is
removed, a use-after-free occurs in rtc_timer_do_work().  Cleanup the
timerqueue and ensure the work is stopped to fix this.

 BUG: KASAN: use-after-free in mutex_lock+0x94/0x110
 Write of size 8 at addr ffffff801d846338 by task kworker/3:1/41

 Workqueue: events rtc_timer_do_work
 Call trace:
  mutex_lock+0x94/0x110
  rtc_timer_do_work+0xec/0x630
  process_one_work+0x5fc/0x1344
  ...

 Allocated by task 551:
  kmem_cache_alloc_trace+0x384/0x6e0
  devm_rtc_allocate_device+0xf0/0x574
  devm_rtc_device_register+0x2c/0x12c
  ...

 Freed by task 572:
  kfree+0x114/0x4d0
  rtc_device_release+0x64/0x80
  device_release+0x8c/0x1f4
  kobject_put+0x1c4/0x4b0
  put_device+0x20/0x30
  devm_rtc_release_device+0x1c/0x30
  devm_action_release+0x54/0x90
  release_nodes+0x124/0x310
  devres_release_group+0x170/0x240
  i2c_device_remove+0xd8/0x314
  ...

 Last potentially related work creation:
  insert_work+0x5c/0x330
  queue_work_on+0xcc/0x154
  rtc_set_time+0x188/0x5bc
  rtc_dev_ioctl+0x2ac/0xbd0
  ...

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211210160951.7718-1-vincent.whitchurch@axis.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/class.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index f77bc089eb6b..0aef7df2ea70 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -26,6 +26,15 @@ struct class *rtc_class;
 static void rtc_device_release(struct device *dev)
 {
 	struct rtc_device *rtc = to_rtc_device(dev);
+	struct timerqueue_head *head = &rtc->timerqueue;
+	struct timerqueue_node *node;
+
+	mutex_lock(&rtc->ops_lock);
+	while ((node = timerqueue_getnext(head)))
+		timerqueue_del(head, node);
+	mutex_unlock(&rtc->ops_lock);
+
+	cancel_work_sync(&rtc->irqwork);
 
 	ida_simple_remove(&rtc_ida, rtc->id);
 	mutex_destroy(&rtc->ops_lock);
-- 
2.35.1

[PATCH 5.15 020/132] rtc: pcf2127: fix bug when reading alarm registers

[Greg Kroah-Hartman]

From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

[ Upstream commit 73ce05302007eece23a6acb7dc124c92a2209087 ]

The first bug is that reading the 5 alarm registers results in a read
operation of 20 bytes. The reason is because the destination buffer is
defined as an array of "unsigned int", and we use the sizeof()
operator on this array to define the bulk read count.

The second bug is that the read value is invalid, because we are
indexing the destination buffer as integers (4 bytes), instead of
indexing it as u8.

Changing the destination buffer type to u8 fixes both problems.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220208162908.3182581-1-hugo@hugovil.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-pcf2127.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index 56c58b055dff..43f801107095 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -374,7 +374,8 @@ static int pcf2127_watchdog_init(struct device *dev, struct pcf2127 *pcf2127)
 static int pcf2127_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
-	unsigned int buf[5], ctrl2;
+	u8 buf[5];
+	unsigned int ctrl2;
 	int ret;
 
 	ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL2, &ctrl2);
-- 
2.35.1

[PATCH 5.15 021/132] um: Cleanup syscall_handler_t definition/cast, fix warning

[Greg Kroah-Hartman]

From: David Gow <davidgow@google.com>

[ Upstream commit f4f03f299a56ce4d73c5431e0327b3b6cb55ebb9 ]

The syscall_handler_t type for x86_64 was defined as 'long (*)(void)',
but always cast to 'long (*)(long, long, long, long, long, long)' before
use. This now triggers a warning (see below).

Define syscall_handler_t as the latter instead, and remove the cast.
This simplifies the code, and fixes the warning.

Warning:
In file included from ../arch/um/include/asm/processor-generic.h:13
                 from ../arch/x86/um/asm/processor.h:41
                 from ../include/linux/rcupdate.h:30
                 from ../include/linux/rculist.h:11
                 from ../include/linux/pid.h:5
                 from ../include/linux/sched.h:14
                 from ../include/linux/ptrace.h:6
                 from ../arch/um/kernel/skas/syscall.c:7:
../arch/um/kernel/skas/syscall.c: In function ‘handle_syscall’:
../arch/x86/um/shared/sysdep/syscalls_64.h:18:11: warning: cast between incompatible function types from ‘long int (*)(void)’ to ‘long int (*)(long int,  long int,  long int,  long int,  long int,  long int)’ [
-Wcast-function-type]
   18 |         (((long (*)(long, long, long, long, long, long)) \
      |           ^
../arch/x86/um/asm/ptrace.h:36:62: note: in definition of macro ‘PT_REGS_SET_SYSCALL_RETURN’
   36 | #define PT_REGS_SET_SYSCALL_RETURN(r, res) (PT_REGS_AX(r) = (res))
      |                                                              ^~~
../arch/um/kernel/skas/syscall.c:46:33: note: in expansion of macro ‘EXECUTE_SYSCALL’
   46 |                                 EXECUTE_SYSCALL(syscall, regs));
      |                                 ^~~~~~~~~~~~~~~

Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/um/shared/sysdep/syscalls_64.h | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/x86/um/shared/sysdep/syscalls_64.h b/arch/x86/um/shared/sysdep/syscalls_64.h
index 8a7d5e1da98e..1e6875b4ffd8 100644
--- a/arch/x86/um/shared/sysdep/syscalls_64.h
+++ b/arch/x86/um/shared/sysdep/syscalls_64.h
@@ -10,13 +10,12 @@
 #include <linux/msg.h>
 #include <linux/shm.h>
 
-typedef long syscall_handler_t(void);
+typedef long syscall_handler_t(long, long, long, long, long, long);
 
 extern syscall_handler_t *sys_call_table[];
 
 #define EXECUTE_SYSCALL(syscall, regs) \
-	(((long (*)(long, long, long, long, long, long)) \
-	  (*sys_call_table[syscall]))(UPT_SYSCALL_ARG1(&regs->regs), \
+	(((*sys_call_table[syscall]))(UPT_SYSCALL_ARG1(&regs->regs), \
 		 		      UPT_SYSCALL_ARG2(&regs->regs), \
 				      UPT_SYSCALL_ARG3(&regs->regs), \
 				      UPT_SYSCALL_ARG4(&regs->regs), \
-- 
2.35.1

[PATCH 5.15 022/132] Input: add bounds checking to input_set_capability()

[Greg Kroah-Hartman]

From: Jeff LaBundy <jeff@labundy.com>

[ Upstream commit 409353cbe9fe48f6bc196114c442b1cff05a39bc ]

Update input_set_capability() to prevent kernel panic in case the
event code exceeds the bitmap for the given event type.

Suggested-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Link: https://lore.kernel.org/r/20220320032537.545250-1-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/input.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/input/input.c b/drivers/input/input.c
index ccaeb2426385..ba246fabc6c1 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -47,6 +47,17 @@ static DEFINE_MUTEX(input_mutex);
 
 static const struct input_value input_value_sync = { EV_SYN, SYN_REPORT, 1 };
 
+static const unsigned int input_max_code[EV_CNT] = {
+	[EV_KEY] = KEY_MAX,
+	[EV_REL] = REL_MAX,
+	[EV_ABS] = ABS_MAX,
+	[EV_MSC] = MSC_MAX,
+	[EV_SW] = SW_MAX,
+	[EV_LED] = LED_MAX,
+	[EV_SND] = SND_MAX,
+	[EV_FF] = FF_MAX,
+};
+
 static inline int is_event_supported(unsigned int code,
 				     unsigned long *bm, unsigned int max)
 {
@@ -2074,6 +2085,14 @@ EXPORT_SYMBOL(input_get_timestamp);
  */
 void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code)
 {
+	if (type < EV_CNT && input_max_code[type] &&
+	    code > input_max_code[type]) {
+		pr_err("%s: invalid code %u for type %u\n", __func__, code,
+		       type);
+		dump_stack();
+		return;
+	}
+
 	switch (type) {
 	case EV_KEY:
 		__set_bit(code, dev->keybit);
-- 
2.35.1

[PATCH 5.15 023/132] Input: stmfts - fix reference leak in stmfts_input_open

[Greg Kroah-Hartman]

From: Zheng Yongjun <zhengyongjun3@huawei.com>

[ Upstream commit 26623eea0da3476446909af96c980768df07bbd9 ]

pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in stmfts_input_open, so we should fix it.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20220317131604.53538-1-zhengyongjun3@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/stmfts.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/input/touchscreen/stmfts.c b/drivers/input/touchscreen/stmfts.c
index bc11203c9cf7..72e0b767e1ba 100644
--- a/drivers/input/touchscreen/stmfts.c
+++ b/drivers/input/touchscreen/stmfts.c
@@ -339,11 +339,11 @@ static int stmfts_input_open(struct input_dev *dev)
 
 	err = pm_runtime_get_sync(&sdata->client->dev);
 	if (err < 0)
-		return err;
+		goto out;
 
 	err = i2c_smbus_write_byte(sdata->client, STMFTS_MS_MT_SENSE_ON);
 	if (err)
-		return err;
+		goto out;
 
 	mutex_lock(&sdata->mutex);
 	sdata->running = true;
@@ -366,7 +366,9 @@ static int stmfts_input_open(struct input_dev *dev)
 				 "failed to enable touchkey\n");
 	}
 
-	return 0;
+out:
+	pm_runtime_put_noidle(&sdata->client->dev);
+	return err;
 }
 
 static void stmfts_input_close(struct input_dev *dev)
-- 
2.35.1

[PATCH 5.15 024/132] nvme-pci: add quirks for Samsung X5 SSDs

[Greg Kroah-Hartman]

From: Monish Kumar R <monish.kumar.r@intel.com>

[ Upstream commit bc360b0b1611566e1bd47384daf49af6a1c51837 ]

Add quirks to not fail the initialization and to have quick resume
latency after cold/warm reboot.

Signed-off-by: Monish Kumar R <monish.kumar.r@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index d7695bdbde8d..e6f55cf6e494 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3379,7 +3379,10 @@ static const struct pci_device_id nvme_id_table[] = {
 				NVME_QUIRK_128_BYTES_SQES |
 				NVME_QUIRK_SHARED_TAGS |
 				NVME_QUIRK_SKIP_CID_GEN },
-
+	{ PCI_DEVICE(0x144d, 0xa808),   /* Samsung X5 */
+		.driver_data =  NVME_QUIRK_DELAY_BEFORE_CHK_RDY|
+				NVME_QUIRK_NO_DEEPEST_PS |
+				NVME_QUIRK_IGNORE_DEV_SUBNQN, },
 	{ PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) },
 	{ 0, }
 };
-- 
2.35.1

[PATCH 5.15 025/132] gfs2: Disable page faults during lockless buffered reads

[Greg Kroah-Hartman]

From: Andreas Gruenbacher <agruenba@redhat.com>

[ Upstream commit 52f3f033a5dbd023307520af1ff551cadfd7f037 ]

During lockless buffered reads, filemap_read() holds page cache page
references while trying to copy data to the user-space buffer.  The
calling process isn't holding the inode glock, but the page references
it holds prevent those pages from being removed from the page cache, and
that prevents the underlying inode glock from being moved to another
node.  Thus, we can end up in the same kinds of distributed deadlock
situations as with normal (non-lockless) buffered reads.

Fix that by disabling page faults during lockless reads as well.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/file.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index eb5ea0262f3c..60390f9dc31f 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -963,14 +963,16 @@ static ssize_t gfs2_file_read_iter(struct kiocb *iocb, struct iov_iter *to)
 			return ret;
 		iocb->ki_flags &= ~IOCB_DIRECT;
 	}
+	pagefault_disable();
 	iocb->ki_flags |= IOCB_NOIO;
 	ret = generic_file_read_iter(iocb, to);
 	iocb->ki_flags &= ~IOCB_NOIO;
+	pagefault_enable();
 	if (ret >= 0) {
 		if (!iov_iter_count(to))
 			return ret;
 		written = ret;
-	} else {
+	} else if (ret != -EFAULT) {
 		if (ret != -EAGAIN)
 			return ret;
 		if (iocb->ki_flags & IOCB_NOWAIT)
-- 
2.35.1

[PATCH 5.15 026/132] rtc: sun6i: Fix time overflow handling

[Greg Kroah-Hartman]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 9f6cd82eca7e91a0d0311242a87c6aa3c2737968 ]

Using "unsigned long" for UNIX timestamps is never a good idea, and
comparing the value of such a variable against U32_MAX does not do
anything useful on 32-bit systems.

Use the proper time64_t type when dealing with timestamps, and avoid
cutting down the time range unnecessarily. This also fixes the flawed
check for the alarm time being too far into the future.

The check for this condition is actually somewhat theoretical, as the
RTC counts till 2033 only anyways, and 2^32 seconds from now is not
before the year 2157 - at which point I hope nobody will be using this
hardware anymore.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220211122643.1343315-4-andre.przywara@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-sun6i.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c
index adec1b14a8de..c551ebf0ac00 100644
--- a/drivers/rtc/rtc-sun6i.c
+++ b/drivers/rtc/rtc-sun6i.c
@@ -138,7 +138,7 @@ struct sun6i_rtc_dev {
 	const struct sun6i_rtc_clk_data *data;
 	void __iomem *base;
 	int irq;
-	unsigned long alarm;
+	time64_t alarm;
 
 	struct clk_hw hw;
 	struct clk_hw *int_osc;
@@ -510,10 +510,8 @@ static int sun6i_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
 	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
 	struct rtc_time *alrm_tm = &wkalrm->time;
 	struct rtc_time tm_now;
-	unsigned long time_now = 0;
-	unsigned long time_set = 0;
-	unsigned long time_gap = 0;
-	int ret = 0;
+	time64_t time_now, time_set;
+	int ret;
 
 	ret = sun6i_rtc_gettime(dev, &tm_now);
 	if (ret < 0) {
@@ -528,9 +526,7 @@ static int sun6i_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
 		return -EINVAL;
 	}
 
-	time_gap = time_set - time_now;
-
-	if (time_gap > U32_MAX) {
+	if ((time_set - time_now) > U32_MAX) {
 		dev_err(dev, "Date too far in the future\n");
 		return -EINVAL;
 	}
@@ -539,7 +535,7 @@ static int sun6i_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
 	writel(0, chip->base + SUN6I_ALRM_COUNTER);
 	usleep_range(100, 300);
 
-	writel(time_gap, chip->base + SUN6I_ALRM_COUNTER);
+	writel(time_set - time_now, chip->base + SUN6I_ALRM_COUNTER);
 	chip->alarm = time_set;
 
 	sun6i_rtc_setaie(wkalrm->enabled, chip);
-- 
2.35.1

[PATCH 5.15 027/132] crypto: stm32 - fix reference leak in stm32_crc_remove

[Greg Kroah-Hartman]

From: Zheng Yongjun <zhengyongjun3@huawei.com>

[ Upstream commit e9a36feecee0ee5845f2e0656f50f9942dd0bed3 ]

pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in stm32_crc_remove, so we should fix it.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/stm32/stm32-crc32.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/crypto/stm32/stm32-crc32.c b/drivers/crypto/stm32/stm32-crc32.c
index be1bf39a317d..90a920e7f664 100644
--- a/drivers/crypto/stm32/stm32-crc32.c
+++ b/drivers/crypto/stm32/stm32-crc32.c
@@ -384,8 +384,10 @@ static int stm32_crc_remove(struct platform_device *pdev)
 	struct stm32_crc *crc = platform_get_drvdata(pdev);
 	int ret = pm_runtime_get_sync(crc->dev);
 
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_noidle(crc->dev);
 		return ret;
+	}
 
 	spin_lock(&crc_list.lock);
 	list_del(&crc->list);
-- 
2.35.1

[PATCH 5.15 028/132] crypto: x86/chacha20 - Avoid spurious jumps to other functions

[Greg Kroah-Hartman]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 4327d168515fd8b5b92fa1efdf1d219fb6514460 ]

The chacha_Nblock_xor_avx512vl() functions all have their own,
identical, .LdoneN label, however in one particular spot {2,4} jump to
the 8 version instead of their own. Resulting in:

  arch/x86/crypto/chacha-x86_64.o: warning: objtool: chacha_2block_xor_avx512vl() falls through to next function chacha_8block_xor_avx512vl()
  arch/x86/crypto/chacha-x86_64.o: warning: objtool: chacha_4block_xor_avx512vl() falls through to next function chacha_8block_xor_avx512vl()

Make each function consistently use its own done label.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/crypto/chacha-avx512vl-x86_64.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/crypto/chacha-avx512vl-x86_64.S b/arch/x86/crypto/chacha-avx512vl-x86_64.S
index 946f74dd6fba..259383e1ad44 100644
--- a/arch/x86/crypto/chacha-avx512vl-x86_64.S
+++ b/arch/x86/crypto/chacha-avx512vl-x86_64.S
@@ -172,7 +172,7 @@ SYM_FUNC_START(chacha_2block_xor_avx512vl)
 	# xor remaining bytes from partial register into output
 	mov		%rcx,%rax
 	and		$0xf,%rcx
-	jz		.Ldone8
+	jz		.Ldone2
 	mov		%rax,%r9
 	and		$~0xf,%r9
 
@@ -438,7 +438,7 @@ SYM_FUNC_START(chacha_4block_xor_avx512vl)
 	# xor remaining bytes from partial register into output
 	mov		%rcx,%rax
 	and		$0xf,%rcx
-	jz		.Ldone8
+	jz		.Ldone4
 	mov		%rax,%r9
 	and		$~0xf,%r9
 
-- 
2.35.1

[PATCH 5.15 029/132] ALSA: hda/realtek: Enable headset mic on Lenovo P360

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 5a8738571747c1e275a40b69a608657603867b7e ]

Lenovo P360 is another platform equipped with ALC897, and it needs
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220325160501.705221-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 30295283512c..b2e98f15a456 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10946,6 +10946,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x14cd, 0x5003, "USI", ALC662_FIXUP_USI_HEADSET_MODE),
 	SND_PCI_QUIRK(0x17aa, 0x1036, "Lenovo P520", ALC662_FIXUP_LENOVO_MULTI_CODECS),
+	SND_PCI_QUIRK(0x17aa, 0x1057, "Lenovo P360", ALC897_FIXUP_HEADSET_MIC_PIN),
 	SND_PCI_QUIRK(0x17aa, 0x32ca, "Lenovo ThinkCentre M80", ALC897_FIXUP_HEADSET_MIC_PIN),
 	SND_PCI_QUIRK(0x17aa, 0x32cb, "Lenovo ThinkCentre M70", ALC897_FIXUP_HEADSET_MIC_PIN),
 	SND_PCI_QUIRK(0x17aa, 0x32cf, "Lenovo ThinkCentre M950", ALC897_FIXUP_HEADSET_MIC_PIN),
-- 
2.35.1

[PATCH 5.15 030/132] s390/traps: improve panic message for translation-specification exception

[Greg Kroah-Hartman]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit f09354ffd84eef3c88efa8ba6df05efe50cfd16a ]

There are many different types of translation exceptions but only a
translation-specification exception leads to a kernel panic since it
indicates corrupted page tables, which must never happen.

Improve the panic message so it is a bit more obvious what this is about.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/traps.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 12d28ff5281f..4044826d72ae 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -142,10 +142,10 @@ static inline void do_fp_trap(struct pt_regs *regs, __u32 fpc)
 	do_trap(regs, SIGFPE, si_code, "floating point exception");
 }
 
-static void translation_exception(struct pt_regs *regs)
+static void translation_specification_exception(struct pt_regs *regs)
 {
 	/* May never happen. */
-	panic("Translation exception");
+	panic("Translation-Specification Exception");
 }
 
 static void illegal_op(struct pt_regs *regs)
@@ -374,7 +374,7 @@ static void (*pgm_check_table[128])(struct pt_regs *regs) = {
 	[0x0f]		= hfp_divide_exception,
 	[0x10]		= do_dat_exception,
 	[0x11]		= do_dat_exception,
-	[0x12]		= translation_exception,
+	[0x12]		= translation_specification_exception,
 	[0x13]		= special_op_exception,
 	[0x14]		= default_trap_handler,
 	[0x15]		= operand_exception,
-- 
2.35.1

[PATCH 5.15 031/132] s390/pci: improve zpci_dev reference counting

[Greg Kroah-Hartman]

From: Niklas Schnelle <schnelle@linux.ibm.com>

[ Upstream commit c122383d221dfa2f41cfe5e672540595de986fde ]

Currently zpci_dev uses kref based reference counting but only accounts
for one original reference plus one reference from an added pci_dev to
its underlying zpci_dev. Counting just the original reference worked
until the pci_dev reference was added in commit 2a671f77ee49 ("s390/pci:
fix use after free of zpci_dev") because once a zpci_dev goes away, i.e.
enters the reserved state, it would immediately get released. However
with the pci_dev reference this is no longer the case and the zpci_dev
may still appear in multiple availability events indicating that it was
reserved. This was solved by detecting when the zpci_dev is already on
its way out but still hanging around. This has however shown some light
on how unusual our zpci_dev reference counting is.

Improve upon this by modelling zpci_dev reference counting on pci_dev.
Analogous to pci_get_slot() increment the reference count in
get_zdev_by_fid(). Thus all users of get_zdev_by_fid() must drop the
reference once they are done with the zpci_dev.

Similar to pci_scan_single_device(), zpci_create_device() returns the
device with an initial count of 1 and the device added to the zpci_list
(analogous to the PCI bus' device_list). In turn users of
zpci_create_device() must only drop the reference once the device is
gone from the point of view of the zPCI subsystem, it might still be
referenced by the common PCI subsystem though.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/pci/pci.c       | 1 +
 arch/s390/pci/pci_bus.h   | 3 ++-
 arch/s390/pci/pci_clp.c   | 9 +++++++--
 arch/s390/pci/pci_event.c | 7 ++++++-
 4 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index b833155ce838..639924d98331 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -69,6 +69,7 @@ struct zpci_dev *get_zdev_by_fid(u32 fid)
 	list_for_each_entry(tmp, &zpci_list, entry) {
 		if (tmp->fid == fid) {
 			zdev = tmp;
+			zpci_zdev_get(zdev);
 			break;
 		}
 	}
diff --git a/arch/s390/pci/pci_bus.h b/arch/s390/pci/pci_bus.h
index e359d2686178..ecef3a9e16c0 100644
--- a/arch/s390/pci/pci_bus.h
+++ b/arch/s390/pci/pci_bus.h
@@ -19,7 +19,8 @@ void zpci_bus_remove_device(struct zpci_dev *zdev, bool set_error);
 void zpci_release_device(struct kref *kref);
 static inline void zpci_zdev_put(struct zpci_dev *zdev)
 {
-	kref_put(&zdev->kref, zpci_release_device);
+	if (zdev)
+		kref_put(&zdev->kref, zpci_release_device);
 }
 
 static inline void zpci_zdev_get(struct zpci_dev *zdev)
diff --git a/arch/s390/pci/pci_clp.c b/arch/s390/pci/pci_clp.c
index be077b39da33..5011d27461fd 100644
--- a/arch/s390/pci/pci_clp.c
+++ b/arch/s390/pci/pci_clp.c
@@ -22,6 +22,8 @@
 #include <asm/clp.h>
 #include <uapi/asm/clp.h>
 
+#include "pci_bus.h"
+
 bool zpci_unique_uid;
 
 void update_uid_checking(bool new)
@@ -403,8 +405,11 @@ static void __clp_add(struct clp_fh_list_entry *entry, void *data)
 		return;
 
 	zdev = get_zdev_by_fid(entry->fid);
-	if (!zdev)
-		zpci_create_device(entry->fid, entry->fh, entry->config_state);
+	if (zdev) {
+		zpci_zdev_put(zdev);
+		return;
+	}
+	zpci_create_device(entry->fid, entry->fh, entry->config_state);
 }
 
 int clp_scan_pci_devices(void)
diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c
index 5b8d647523f9..6d57625b8ed9 100644
--- a/arch/s390/pci/pci_event.c
+++ b/arch/s390/pci/pci_event.c
@@ -62,10 +62,12 @@ static void __zpci_event_error(struct zpci_ccdf_err *ccdf)
 	       pdev ? pci_name(pdev) : "n/a", ccdf->pec, ccdf->fid);
 
 	if (!pdev)
-		return;
+		goto no_pdev;
 
 	pdev->error_state = pci_channel_io_perm_failure;
 	pci_dev_put(pdev);
+no_pdev:
+	zpci_zdev_put(zdev);
 }
 
 void zpci_event_error(void *data)
@@ -94,6 +96,7 @@ static void zpci_event_hard_deconfigured(struct zpci_dev *zdev, u32 fh)
 static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf)
 {
 	struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid);
+	bool existing_zdev = !!zdev;
 	enum zpci_state state;
 
 	zpci_err("avail CCDF:\n");
@@ -156,6 +159,8 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf)
 	default:
 		break;
 	}
+	if (existing_zdev)
+		zpci_zdev_put(zdev);
 }
 
 void zpci_event_availability(void *data)
-- 
2.35.1

[PATCH 5.15 032/132] vhost_vdpa: dont setup irq offloading when irq_num < 0

[Greg Kroah-Hartman]

From: Zhu Lingshan <lingshan.zhu@intel.com>

[ Upstream commit cce0ab2b2a39072d81f98017f7b076f3410ef740 ]

When irq number is negative(e.g., -EINVAL), the virtqueue
may be disabled or the virtqueues are sharing a device irq.
In such case, we should not setup irq offloading for a virtqueue.

Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Link: https://lore.kernel.org/r/20220222115428.998334-3-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vhost/vdpa.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c
index d62f05d056b7..299a99532618 100644
--- a/drivers/vhost/vdpa.c
+++ b/drivers/vhost/vdpa.c
@@ -97,8 +97,11 @@ static void vhost_vdpa_setup_vq_irq(struct vhost_vdpa *v, u16 qid)
 		return;
 
 	irq = ops->get_vq_irq(vdpa, qid);
+	if (irq < 0)
+		return;
+
 	irq_bypass_unregister_producer(&vq->call_ctx.producer);
-	if (!vq->call_ctx.ctx || irq < 0)
+	if (!vq->call_ctx.ctx)
 		return;
 
 	vq->call_ctx.producer.token = vq->call_ctx.ctx;
-- 
2.35.1

[PATCH 5.15 033/132] tools/virtio: compile with -pthread

[Greg Kroah-Hartman]

From: Michael S. Tsirkin <mst@redhat.com>

[ Upstream commit f03560a57c1f60db6ac23ffd9714e1c69e2f95c7 ]

When using pthreads, one has to compile and link with -lpthread,
otherwise e.g. glibc is not guaranteed to be reentrant.

This replaces -lpthread.

Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/virtio/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/virtio/Makefile b/tools/virtio/Makefile
index 0d7bbe49359d..1b25cc7c64bb 100644
--- a/tools/virtio/Makefile
+++ b/tools/virtio/Makefile
@@ -5,7 +5,8 @@ virtio_test: virtio_ring.o virtio_test.o
 vringh_test: vringh_test.o vringh.o virtio_ring.o
 
 CFLAGS += -g -O2 -Werror -Wno-maybe-uninitialized -Wall -I. -I../include/ -I ../../usr/include/ -Wno-pointer-sign -fno-strict-overflow -fno-strict-aliasing -fno-common -MMD -U_FORTIFY_SOURCE -include ../../include/linux/kconfig.h
-LDFLAGS += -lpthread
+CFLAGS += -pthread
+LDFLAGS += -pthread
 vpath %.c ../../drivers/virtio ../../drivers/vhost
 mod:
 	${MAKE} -C `pwd`/../.. M=`pwd`/vhost_test V=${V}
-- 
2.35.1

[PATCH 5.15 034/132] nvmet: use a private workqueue instead of the system workqueue

[Greg Kroah-Hartman]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit 8832cf922151e9dfa2821736beb0ae2dd3968b6e ]

Any attempt to flush kernel-global WQs has possibility of deadlock
so we should simply stop using them, instead introduce nvmet_wq
which is the generic nvmet workqueue for work elements that
don't explicitly require a dedicated workqueue (by the mere fact
that they are using the system_wq).

Changes were done using the following replaces:

 - s/schedule_work(/queue_work(nvmet_wq, /g
 - s/schedule_delayed_work(/queue_delayed_work(nvmet_wq, /g
 - s/flush_scheduled_work()/flush_workqueue(nvmet_wq)/g

Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/admin-cmd.c   |  2 +-
 drivers/nvme/target/configfs.c    |  2 +-
 drivers/nvme/target/core.c        | 24 ++++++++++++++++++------
 drivers/nvme/target/fc.c          |  8 ++++----
 drivers/nvme/target/fcloop.c      | 16 ++++++++--------
 drivers/nvme/target/io-cmd-file.c |  6 +++---
 drivers/nvme/target/loop.c        |  4 ++--
 drivers/nvme/target/nvmet.h       |  1 +
 drivers/nvme/target/passthru.c    |  2 +-
 drivers/nvme/target/rdma.c        | 12 ++++++------
 drivers/nvme/target/tcp.c         | 10 +++++-----
 11 files changed, 50 insertions(+), 37 deletions(-)

diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c
index aa6d84d8848e..52bb262d267a 100644
--- a/drivers/nvme/target/admin-cmd.c
+++ b/drivers/nvme/target/admin-cmd.c
@@ -978,7 +978,7 @@ void nvmet_execute_async_event(struct nvmet_req *req)
 	ctrl->async_event_cmds[ctrl->nr_async_event_cmds++] = req;
 	mutex_unlock(&ctrl->lock);
 
-	schedule_work(&ctrl->async_event_work);
+	queue_work(nvmet_wq, &ctrl->async_event_work);
 }
 
 void nvmet_execute_keep_alive(struct nvmet_req *req)
diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
index 496d775c6770..cea30e4f5053 100644
--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -1554,7 +1554,7 @@ static void nvmet_port_release(struct config_item *item)
 	struct nvmet_port *port = to_nvmet_port(item);
 
 	/* Let inflight controllers teardown complete */
-	flush_scheduled_work();
+	flush_workqueue(nvmet_wq);
 	list_del(&port->global_entry);
 
 	kfree(port->ana_state);
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index b8425fa34300..a8dafe8670f2 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -20,6 +20,9 @@ struct workqueue_struct *zbd_wq;
 static const struct nvmet_fabrics_ops *nvmet_transports[NVMF_TRTYPE_MAX];
 static DEFINE_IDA(cntlid_ida);
 
+struct workqueue_struct *nvmet_wq;
+EXPORT_SYMBOL_GPL(nvmet_wq);
+
 /*
  * This read/write semaphore is used to synchronize access to configuration
  * information on a target system that will result in discovery log page
@@ -205,7 +208,7 @@ void nvmet_add_async_event(struct nvmet_ctrl *ctrl, u8 event_type,
 	list_add_tail(&aen->entry, &ctrl->async_events);
 	mutex_unlock(&ctrl->lock);
 
-	schedule_work(&ctrl->async_event_work);
+	queue_work(nvmet_wq, &ctrl->async_event_work);
 }
 
 static void nvmet_add_to_changed_ns_log(struct nvmet_ctrl *ctrl, __le32 nsid)
@@ -385,7 +388,7 @@ static void nvmet_keep_alive_timer(struct work_struct *work)
 	if (reset_tbkas) {
 		pr_debug("ctrl %d reschedule traffic based keep-alive timer\n",
 			ctrl->cntlid);
-		schedule_delayed_work(&ctrl->ka_work, ctrl->kato * HZ);
+		queue_delayed_work(nvmet_wq, &ctrl->ka_work, ctrl->kato * HZ);
 		return;
 	}
 
@@ -403,7 +406,7 @@ void nvmet_start_keep_alive_timer(struct nvmet_ctrl *ctrl)
 	pr_debug("ctrl %d start keep-alive timer for %d secs\n",
 		ctrl->cntlid, ctrl->kato);
 
-	schedule_delayed_work(&ctrl->ka_work, ctrl->kato * HZ);
+	queue_delayed_work(nvmet_wq, &ctrl->ka_work, ctrl->kato * HZ);
 }
 
 void nvmet_stop_keep_alive_timer(struct nvmet_ctrl *ctrl)
@@ -1477,7 +1480,7 @@ void nvmet_ctrl_fatal_error(struct nvmet_ctrl *ctrl)
 	mutex_lock(&ctrl->lock);
 	if (!(ctrl->csts & NVME_CSTS_CFS)) {
 		ctrl->csts |= NVME_CSTS_CFS;
-		schedule_work(&ctrl->fatal_err_work);
+		queue_work(nvmet_wq, &ctrl->fatal_err_work);
 	}
 	mutex_unlock(&ctrl->lock);
 }
@@ -1617,9 +1620,15 @@ static int __init nvmet_init(void)
 		goto out_free_zbd_work_queue;
 	}
 
+	nvmet_wq = alloc_workqueue("nvmet-wq", WQ_MEM_RECLAIM, 0);
+	if (!nvmet_wq) {
+		error = -ENOMEM;
+		goto out_free_buffered_work_queue;
+	}
+
 	error = nvmet_init_discovery();
 	if (error)
-		goto out_free_work_queue;
+		goto out_free_nvmet_work_queue;
 
 	error = nvmet_init_configfs();
 	if (error)
@@ -1628,7 +1637,9 @@ static int __init nvmet_init(void)
 
 out_exit_discovery:
 	nvmet_exit_discovery();
-out_free_work_queue:
+out_free_nvmet_work_queue:
+	destroy_workqueue(nvmet_wq);
+out_free_buffered_work_queue:
 	destroy_workqueue(buffered_io_wq);
 out_free_zbd_work_queue:
 	destroy_workqueue(zbd_wq);
@@ -1640,6 +1651,7 @@ static void __exit nvmet_exit(void)
 	nvmet_exit_configfs();
 	nvmet_exit_discovery();
 	ida_destroy(&cntlid_ida);
+	destroy_workqueue(nvmet_wq);
 	destroy_workqueue(buffered_io_wq);
 	destroy_workqueue(zbd_wq);
 
diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 22b5108168a6..c43bc5e1c7a2 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -1491,7 +1491,7 @@ __nvmet_fc_free_assocs(struct nvmet_fc_tgtport *tgtport)
 	list_for_each_entry_rcu(assoc, &tgtport->assoc_list, a_list) {
 		if (!nvmet_fc_tgt_a_get(assoc))
 			continue;
-		if (!schedule_work(&assoc->del_work))
+		if (!queue_work(nvmet_wq, &assoc->del_work))
 			/* already deleting - release local reference */
 			nvmet_fc_tgt_a_put(assoc);
 	}
@@ -1546,7 +1546,7 @@ nvmet_fc_invalidate_host(struct nvmet_fc_target_port *target_port,
 			continue;
 		assoc->hostport->invalid = 1;
 		noassoc = false;
-		if (!schedule_work(&assoc->del_work))
+		if (!queue_work(nvmet_wq, &assoc->del_work))
 			/* already deleting - release local reference */
 			nvmet_fc_tgt_a_put(assoc);
 	}
@@ -1592,7 +1592,7 @@ nvmet_fc_delete_ctrl(struct nvmet_ctrl *ctrl)
 		nvmet_fc_tgtport_put(tgtport);
 
 		if (found_ctrl) {
-			if (!schedule_work(&assoc->del_work))
+			if (!queue_work(nvmet_wq, &assoc->del_work))
 				/* already deleting - release local reference */
 				nvmet_fc_tgt_a_put(assoc);
 			return;
@@ -2060,7 +2060,7 @@ nvmet_fc_rcv_ls_req(struct nvmet_fc_target_port *target_port,
 	iod->rqstdatalen = lsreqbuf_len;
 	iod->hosthandle = hosthandle;
 
-	schedule_work(&iod->work);
+	queue_work(nvmet_wq, &iod->work);
 
 	return 0;
 }
diff --git a/drivers/nvme/target/fcloop.c b/drivers/nvme/target/fcloop.c
index 54606f1872b4..5c16372f3b53 100644
--- a/drivers/nvme/target/fcloop.c
+++ b/drivers/nvme/target/fcloop.c
@@ -360,7 +360,7 @@ fcloop_h2t_ls_req(struct nvme_fc_local_port *localport,
 		spin_lock(&rport->lock);
 		list_add_tail(&rport->ls_list, &tls_req->ls_list);
 		spin_unlock(&rport->lock);
-		schedule_work(&rport->ls_work);
+		queue_work(nvmet_wq, &rport->ls_work);
 		return ret;
 	}
 
@@ -393,7 +393,7 @@ fcloop_h2t_xmt_ls_rsp(struct nvmet_fc_target_port *targetport,
 		spin_lock(&rport->lock);
 		list_add_tail(&rport->ls_list, &tls_req->ls_list);
 		spin_unlock(&rport->lock);
-		schedule_work(&rport->ls_work);
+		queue_work(nvmet_wq, &rport->ls_work);
 	}
 
 	return 0;
@@ -448,7 +448,7 @@ fcloop_t2h_ls_req(struct nvmet_fc_target_port *targetport, void *hosthandle,
 		spin_lock(&tport->lock);
 		list_add_tail(&tport->ls_list, &tls_req->ls_list);
 		spin_unlock(&tport->lock);
-		schedule_work(&tport->ls_work);
+		queue_work(nvmet_wq, &tport->ls_work);
 		return ret;
 	}
 
@@ -480,7 +480,7 @@ fcloop_t2h_xmt_ls_rsp(struct nvme_fc_local_port *localport,
 		spin_lock(&tport->lock);
 		list_add_tail(&tport->ls_list, &tls_req->ls_list);
 		spin_unlock(&tport->lock);
-		schedule_work(&tport->ls_work);
+		queue_work(nvmet_wq, &tport->ls_work);
 	}
 
 	return 0;
@@ -520,7 +520,7 @@ fcloop_tgt_discovery_evt(struct nvmet_fc_target_port *tgtport)
 	tgt_rscn->tport = tgtport->private;
 	INIT_WORK(&tgt_rscn->work, fcloop_tgt_rscn_work);
 
-	schedule_work(&tgt_rscn->work);
+	queue_work(nvmet_wq, &tgt_rscn->work);
 }
 
 static void
@@ -739,7 +739,7 @@ fcloop_fcp_req(struct nvme_fc_local_port *localport,
 	INIT_WORK(&tfcp_req->tio_done_work, fcloop_tgt_fcprqst_done_work);
 	kref_init(&tfcp_req->ref);
 
-	schedule_work(&tfcp_req->fcp_rcv_work);
+	queue_work(nvmet_wq, &tfcp_req->fcp_rcv_work);
 
 	return 0;
 }
@@ -921,7 +921,7 @@ fcloop_fcp_req_release(struct nvmet_fc_target_port *tgtport,
 {
 	struct fcloop_fcpreq *tfcp_req = tgt_fcp_req_to_fcpreq(tgt_fcpreq);
 
-	schedule_work(&tfcp_req->tio_done_work);
+	queue_work(nvmet_wq, &tfcp_req->tio_done_work);
 }
 
 static void
@@ -976,7 +976,7 @@ fcloop_fcp_abort(struct nvme_fc_local_port *localport,
 
 	if (abortio)
 		/* leave the reference while the work item is scheduled */
-		WARN_ON(!schedule_work(&tfcp_req->abort_rcv_work));
+		WARN_ON(!queue_work(nvmet_wq, &tfcp_req->abort_rcv_work));
 	else  {
 		/*
 		 * as the io has already had the done callback made,
diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c
index df7e033dd273..228871d48106 100644
--- a/drivers/nvme/target/io-cmd-file.c
+++ b/drivers/nvme/target/io-cmd-file.c
@@ -292,7 +292,7 @@ static void nvmet_file_execute_flush(struct nvmet_req *req)
 	if (!nvmet_check_transfer_len(req, 0))
 		return;
 	INIT_WORK(&req->f.work, nvmet_file_flush_work);
-	schedule_work(&req->f.work);
+	queue_work(nvmet_wq, &req->f.work);
 }
 
 static void nvmet_file_execute_discard(struct nvmet_req *req)
@@ -352,7 +352,7 @@ static void nvmet_file_execute_dsm(struct nvmet_req *req)
 	if (!nvmet_check_data_len_lte(req, nvmet_dsm_len(req)))
 		return;
 	INIT_WORK(&req->f.work, nvmet_file_dsm_work);
-	schedule_work(&req->f.work);
+	queue_work(nvmet_wq, &req->f.work);
 }
 
 static void nvmet_file_write_zeroes_work(struct work_struct *w)
@@ -382,7 +382,7 @@ static void nvmet_file_execute_write_zeroes(struct nvmet_req *req)
 	if (!nvmet_check_transfer_len(req, 0))
 		return;
 	INIT_WORK(&req->f.work, nvmet_file_write_zeroes_work);
-	schedule_work(&req->f.work);
+	queue_work(nvmet_wq, &req->f.work);
 }
 
 u16 nvmet_file_parse_io_cmd(struct nvmet_req *req)
diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c
index 0285ccc7541f..2553f487c9f2 100644
--- a/drivers/nvme/target/loop.c
+++ b/drivers/nvme/target/loop.c
@@ -166,7 +166,7 @@ static blk_status_t nvme_loop_queue_rq(struct blk_mq_hw_ctx *hctx,
 		iod->req.transfer_len = blk_rq_payload_bytes(req);
 	}
 
-	schedule_work(&iod->work);
+	queue_work(nvmet_wq, &iod->work);
 	return BLK_STS_OK;
 }
 
@@ -187,7 +187,7 @@ static void nvme_loop_submit_async_event(struct nvme_ctrl *arg)
 		return;
 	}
 
-	schedule_work(&iod->work);
+	queue_work(nvmet_wq, &iod->work);
 }
 
 static int nvme_loop_init_iod(struct nvme_loop_ctrl *ctrl,
diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
index 7143c7fa7464..dbeb0b8c1194 100644
--- a/drivers/nvme/target/nvmet.h
+++ b/drivers/nvme/target/nvmet.h
@@ -365,6 +365,7 @@ struct nvmet_req {
 
 extern struct workqueue_struct *buffered_io_wq;
 extern struct workqueue_struct *zbd_wq;
+extern struct workqueue_struct *nvmet_wq;
 
 static inline void nvmet_set_result(struct nvmet_req *req, u32 result)
 {
diff --git a/drivers/nvme/target/passthru.c b/drivers/nvme/target/passthru.c
index f0efb3537989..6220e1dd961a 100644
--- a/drivers/nvme/target/passthru.c
+++ b/drivers/nvme/target/passthru.c
@@ -281,7 +281,7 @@ static void nvmet_passthru_execute_cmd(struct nvmet_req *req)
 	if (req->p.use_workqueue || effects) {
 		INIT_WORK(&req->p.work, nvmet_passthru_execute_cmd_work);
 		req->p.rq = rq;
-		schedule_work(&req->p.work);
+		queue_work(nvmet_wq, &req->p.work);
 	} else {
 		rq->end_io_data = req;
 		blk_execute_rq_nowait(ns ? ns->disk : NULL, rq, 0,
diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c
index f1eedbf493d5..18e082091c82 100644
--- a/drivers/nvme/target/rdma.c
+++ b/drivers/nvme/target/rdma.c
@@ -1583,7 +1583,7 @@ static int nvmet_rdma_queue_connect(struct rdma_cm_id *cm_id,
 
 	if (queue->host_qid == 0) {
 		/* Let inflight controller teardown complete */
-		flush_scheduled_work();
+		flush_workqueue(nvmet_wq);
 	}
 
 	ret = nvmet_rdma_cm_accept(cm_id, queue, &event->param.conn);
@@ -1668,7 +1668,7 @@ static void __nvmet_rdma_queue_disconnect(struct nvmet_rdma_queue *queue)
 
 	if (disconnect) {
 		rdma_disconnect(queue->cm_id);
-		schedule_work(&queue->release_work);
+		queue_work(nvmet_wq, &queue->release_work);
 	}
 }
 
@@ -1698,7 +1698,7 @@ static void nvmet_rdma_queue_connect_fail(struct rdma_cm_id *cm_id,
 	mutex_unlock(&nvmet_rdma_queue_mutex);
 
 	pr_err("failed to connect queue %d\n", queue->idx);
-	schedule_work(&queue->release_work);
+	queue_work(nvmet_wq, &queue->release_work);
 }
 
 /**
@@ -1772,7 +1772,7 @@ static int nvmet_rdma_cm_handler(struct rdma_cm_id *cm_id,
 		if (!queue) {
 			struct nvmet_rdma_port *port = cm_id->context;
 
-			schedule_delayed_work(&port->repair_work, 0);
+			queue_delayed_work(nvmet_wq, &port->repair_work, 0);
 			break;
 		}
 		fallthrough;
@@ -1902,7 +1902,7 @@ static void nvmet_rdma_repair_port_work(struct work_struct *w)
 	nvmet_rdma_disable_port(port);
 	ret = nvmet_rdma_enable_port(port);
 	if (ret)
-		schedule_delayed_work(&port->repair_work, 5 * HZ);
+		queue_delayed_work(nvmet_wq, &port->repair_work, 5 * HZ);
 }
 
 static int nvmet_rdma_add_port(struct nvmet_port *nport)
@@ -2046,7 +2046,7 @@ static void nvmet_rdma_remove_one(struct ib_device *ib_device, void *client_data
 	}
 	mutex_unlock(&nvmet_rdma_queue_mutex);
 
-	flush_scheduled_work();
+	flush_workqueue(nvmet_wq);
 }
 
 static struct ib_client nvmet_rdma_ib_client = {
diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index 2b8bab28417b..f592e5f7f5f3 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -1251,7 +1251,7 @@ static void nvmet_tcp_schedule_release_queue(struct nvmet_tcp_queue *queue)
 	spin_lock(&queue->state_lock);
 	if (queue->state != NVMET_TCP_Q_DISCONNECTING) {
 		queue->state = NVMET_TCP_Q_DISCONNECTING;
-		schedule_work(&queue->release_work);
+		queue_work(nvmet_wq, &queue->release_work);
 	}
 	spin_unlock(&queue->state_lock);
 }
@@ -1662,7 +1662,7 @@ static void nvmet_tcp_listen_data_ready(struct sock *sk)
 		goto out;
 
 	if (sk->sk_state == TCP_LISTEN)
-		schedule_work(&port->accept_work);
+		queue_work(nvmet_wq, &port->accept_work);
 out:
 	read_unlock_bh(&sk->sk_callback_lock);
 }
@@ -1793,7 +1793,7 @@ static u16 nvmet_tcp_install_queue(struct nvmet_sq *sq)
 
 	if (sq->qid == 0) {
 		/* Let inflight controller teardown complete */
-		flush_scheduled_work();
+		flush_workqueue(nvmet_wq);
 	}
 
 	queue->nr_cmds = sq->size * 2;
@@ -1854,12 +1854,12 @@ static void __exit nvmet_tcp_exit(void)
 
 	nvmet_unregister_transport(&nvmet_tcp_ops);
 
-	flush_scheduled_work();
+	flush_workqueue(nvmet_wq);
 	mutex_lock(&nvmet_tcp_queue_mutex);
 	list_for_each_entry(queue, &nvmet_tcp_queue_list, queue_list)
 		kernel_sock_shutdown(queue->sock, SHUT_RDWR);
 	mutex_unlock(&nvmet_tcp_queue_mutex);
-	flush_scheduled_work();
+	flush_workqueue(nvmet_wq);
 
 	destroy_workqueue(nvmet_tcp_wq);
 }
-- 
2.35.1

[PATCH 5.15 035/132] nvme-multipath: fix hang when disk goes live over reconnect

[Greg Kroah-Hartman]

From: Anton Eidelman <anton.eidelman@gmail.com>

[ Upstream commit a4a6f3c8f61c3cfbda4998ad94596059ad7e4332 ]

nvme_mpath_init_identify() invoked from nvme_init_identify() fetches a
fresh ANA log from the ctrl.  This is essential to have an up to date
path states for both existing namespaces and for those scan_work may
discover once the ctrl is up.

This happens in the following cases:
  1) A new ctrl is being connected.
  2) An existing ctrl is successfully reconnected.
  3) An existing ctrl is being reset.

While in (1) ctrl->namespaces is empty, (2 & 3) may have namespaces, and
nvme_read_ana_log() may call nvme_update_ns_ana_state().

This result in a hang when the ANA state of an existing namespace changes
and makes the disk live: nvme_mpath_set_live() issues IO to the namespace
through the ctrl, which does NOT have IO queues yet.

See sample hang below.

Solution:
- nvme_update_ns_ana_state() to call set_live only if ctrl is live
- nvme_read_ana_log() call from nvme_mpath_init_identify()
  therefore only fetches and parses the ANA log;
  any erros in this process will fail the ctrl setup as appropriate;
- a separate function nvme_mpath_update()
  is called in nvme_start_ctrl();
  this parses the ANA log without fetching it.
  At this point the ctrl is live,
  therefore, disks can be set live normally.

Sample failure:
    nvme nvme0: starting error recovery
    nvme nvme0: Reconnecting in 10 seconds...
    block nvme0n6: no usable path - requeuing I/O
    INFO: task kworker/u8:3:312 blocked for more than 122 seconds.
          Tainted: G            E     5.14.5-1.el7.elrepo.x86_64 #1
    Workqueue: nvme-wq nvme_tcp_reconnect_ctrl_work [nvme_tcp]
    Call Trace:
     __schedule+0x2a2/0x7e0
     schedule+0x4e/0xb0
     io_schedule+0x16/0x40
     wait_on_page_bit_common+0x15c/0x3e0
     do_read_cache_page+0x1e0/0x410
     read_cache_page+0x12/0x20
     read_part_sector+0x46/0x100
     read_lba+0x121/0x240
     efi_partition+0x1d2/0x6a0
     bdev_disk_changed.part.0+0x1df/0x430
     bdev_disk_changed+0x18/0x20
     blkdev_get_whole+0x77/0xe0
     blkdev_get_by_dev+0xd2/0x3a0
     __device_add_disk+0x1ed/0x310
     device_add_disk+0x13/0x20
     nvme_mpath_set_live+0x138/0x1b0 [nvme_core]
     nvme_update_ns_ana_state+0x2b/0x30 [nvme_core]
     nvme_update_ana_state+0xca/0xe0 [nvme_core]
     nvme_parse_ana_log+0xac/0x170 [nvme_core]
     nvme_read_ana_log+0x7d/0xe0 [nvme_core]
     nvme_mpath_init_identify+0x105/0x150 [nvme_core]
     nvme_init_identify+0x2df/0x4d0 [nvme_core]
     nvme_init_ctrl_finish+0x8d/0x3b0 [nvme_core]
     nvme_tcp_setup_ctrl+0x337/0x390 [nvme_tcp]
     nvme_tcp_reconnect_ctrl_work+0x24/0x40 [nvme_tcp]
     process_one_work+0x1bd/0x360
     worker_thread+0x50/0x3d0

Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c      |  1 +
 drivers/nvme/host/multipath.c | 25 +++++++++++++++++++++++--
 drivers/nvme/host/nvme.h      |  4 ++++
 3 files changed, 28 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index f2bb57615762..87877397d1ad 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -4358,6 +4358,7 @@ void nvme_start_ctrl(struct nvme_ctrl *ctrl)
 	if (ctrl->queue_count > 1) {
 		nvme_queue_scan(ctrl);
 		nvme_start_queues(ctrl);
+		nvme_mpath_update(ctrl);
 	}
 }
 EXPORT_SYMBOL_GPL(nvme_start_ctrl);
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index e9301b51db76..064acad505d3 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -574,8 +574,17 @@ static void nvme_update_ns_ana_state(struct nvme_ana_group_desc *desc,
 	ns->ana_grpid = le32_to_cpu(desc->grpid);
 	ns->ana_state = desc->state;
 	clear_bit(NVME_NS_ANA_PENDING, &ns->flags);
-
-	if (nvme_state_is_live(ns->ana_state))
+	/*
+	 * nvme_mpath_set_live() will trigger I/O to the multipath path device
+	 * and in turn to this path device.  However we cannot accept this I/O
+	 * if the controller is not live.  This may deadlock if called from
+	 * nvme_mpath_init_identify() and the ctrl will never complete
+	 * initialization, preventing I/O from completing.  For this case we
+	 * will reprocess the ANA log page in nvme_mpath_update() once the
+	 * controller is ready.
+	 */
+	if (nvme_state_is_live(ns->ana_state) &&
+	    ns->ctrl->state == NVME_CTRL_LIVE)
 		nvme_mpath_set_live(ns);
 }
 
@@ -662,6 +671,18 @@ static void nvme_ana_work(struct work_struct *work)
 	nvme_read_ana_log(ctrl);
 }
 
+void nvme_mpath_update(struct nvme_ctrl *ctrl)
+{
+	u32 nr_change_groups = 0;
+
+	if (!ctrl->ana_log_buf)
+		return;
+
+	mutex_lock(&ctrl->ana_lock);
+	nvme_parse_ana_log(ctrl, &nr_change_groups, nvme_update_ana_state);
+	mutex_unlock(&ctrl->ana_lock);
+}
+
 static void nvme_anatt_timeout(struct timer_list *t)
 {
 	struct nvme_ctrl *ctrl = from_timer(ctrl, t, anatt_timer);
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index f1e5c7564cae..72bcd7e5716e 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -776,6 +776,7 @@ void nvme_mpath_add_disk(struct nvme_ns *ns, struct nvme_id_ns *id);
 void nvme_mpath_remove_disk(struct nvme_ns_head *head);
 int nvme_mpath_init_identify(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id);
 void nvme_mpath_init_ctrl(struct nvme_ctrl *ctrl);
+void nvme_mpath_update(struct nvme_ctrl *ctrl);
 void nvme_mpath_uninit(struct nvme_ctrl *ctrl);
 void nvme_mpath_stop(struct nvme_ctrl *ctrl);
 bool nvme_mpath_clear_current_path(struct nvme_ns *ns);
@@ -850,6 +851,9 @@ static inline int nvme_mpath_init_identify(struct nvme_ctrl *ctrl,
 "Please enable CONFIG_NVME_MULTIPATH for full support of multi-port devices.\n");
 	return 0;
 }
+static inline void nvme_mpath_update(struct nvme_ctrl *ctrl)
+{
+}
 static inline void nvme_mpath_uninit(struct nvme_ctrl *ctrl)
 {
 }
-- 
2.35.1

[PATCH 5.15 036/132] rtc: mc146818-lib: Fix the AltCentury for AMD platforms

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit 3ae8fd41573af4fb3a490c9ed947fc936ba87190 ]

Setting the century forward has been failing on AMD platforms.
There was a previous attempt at fixing this for family 0x17 as part of
commit 7ad295d5196a ("rtc: Fix the AltCentury value on AMD/Hygon
platform") but this was later reverted due to some problems reported
that appeared to stem from an FW bug on a family 0x17 desktop system.

The same comments mentioned in the previous commit continue to apply
to the newer platforms as well.

```
MC146818 driver use function mc146818_set_time() to set register
RTC_FREQ_SELECT(RTC_REG_A)'s bit4-bit6 field which means divider stage
reset value on Intel platform to 0x7.

While AMD/Hygon RTC_REG_A(0Ah)'s bit4 is defined as DV0 [Reference]:
DV0 = 0 selects Bank 0, DV0 = 1 selects Bank 1. Bit5-bit6 is defined
as reserved.

DV0 is set to 1, it will select Bank 1, which will disable AltCentury
register(0x32) access. As UEFI pass acpi_gbl_FADT.century 0x32
(AltCentury), the CMOS write will be failed on code:
CMOS_WRITE(century, acpi_gbl_FADT.century).

Correct RTC_REG_A bank select bit(DV0) to 0 on AMD/Hygon CPUs, it will
enable AltCentury(0x32) register writing and finally setup century as
expected.
```

However in closer examination the change previously submitted was also
modifying bits 5 & 6 which are declared reserved in the AMD documentation.
So instead modify just the DV0 bank selection bit.

Being cognizant that there was a failure reported before, split the code
change out to a static function that can also be used for exclusions if
any regressions such as Mikhail's pop up again.

Cc: Jinke Fan <fanjinke@hygon.cn>
Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/all/CABXGCsMLob0DC25JS8wwAYydnDoHBSoMh2_YLPfqm3TTvDE-Zw@mail.gmail.com/
Link: https://www.amd.com/system/files/TechDocs/51192_Bolton_FCH_RRG.pdf
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220111225750.1699-1-mario.limonciello@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-mc146818-lib.c | 16 +++++++++++++++-
 include/linux/mc146818rtc.h    |  2 ++
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-mc146818-lib.c b/drivers/rtc/rtc-mc146818-lib.c
index 8abac672f3cb..f3f5a87fe376 100644
--- a/drivers/rtc/rtc-mc146818-lib.c
+++ b/drivers/rtc/rtc-mc146818-lib.c
@@ -146,6 +146,17 @@ int mc146818_get_time(struct rtc_time *time)
 }
 EXPORT_SYMBOL_GPL(mc146818_get_time);
 
+/* AMD systems don't allow access to AltCentury with DV1 */
+static bool apply_amd_register_a_behavior(void)
+{
+#ifdef CONFIG_X86
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD ||
+	    boot_cpu_data.x86_vendor == X86_VENDOR_HYGON)
+		return true;
+#endif
+	return false;
+}
+
 /* Set the current date and time in the real time clock. */
 int mc146818_set_time(struct rtc_time *time)
 {
@@ -219,7 +230,10 @@ int mc146818_set_time(struct rtc_time *time)
 	save_control = CMOS_READ(RTC_CONTROL);
 	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
 	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
-	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+	if (apply_amd_register_a_behavior())
+		CMOS_WRITE((save_freq_select & ~RTC_AMD_BANK_SELECT), RTC_FREQ_SELECT);
+	else
+		CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
 
 #ifdef CONFIG_MACH_DECSTATION
 	CMOS_WRITE(real_yrs, RTC_DEC_YEAR);
diff --git a/include/linux/mc146818rtc.h b/include/linux/mc146818rtc.h
index 37c74e25f53d..3038124c6115 100644
--- a/include/linux/mc146818rtc.h
+++ b/include/linux/mc146818rtc.h
@@ -86,6 +86,8 @@ struct cmos_rtc_board_info {
    /* 2 values for divider stage reset, others for "testing purposes only" */
 #  define RTC_DIV_RESET1	0x60
 #  define RTC_DIV_RESET2	0x70
+   /* In AMD BKDG bit 5 and 6 are reserved, bit 4 is for select dv0 bank */
+#  define RTC_AMD_BANK_SELECT	0x10
   /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */
 # define RTC_RATE_SELECT 	0x0F
 
-- 
2.35.1

[PATCH 5.15 037/132] fs: fix an infinite loop in iomap_fiemap

[Greg Kroah-Hartman]

From: Guo Xuenan <guoxuenan@huawei.com>

[ Upstream commit 49df34221804cfd6384135b28b03c9461a31d024 ]

when get fiemap starting from MAX_LFS_FILESIZE, (maxbytes - *len) < start
will always true , then *len set zero. because of start offset is beyond
file size, for erofs filesystem it will always return iomap.length with
zero,iomap iterate will enter infinite loop. it is necessary cover this
corner case to avoid this situation.

------------[ cut here ]------------
WARNING: CPU: 7 PID: 905 at fs/iomap/iter.c:35 iomap_iter+0x97f/0xc70
Modules linked in: xfs erofs
CPU: 7 PID: 905 Comm: iomap Tainted: G        W         5.17.0-rc8 #27
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:iomap_iter+0x97f/0xc70
Code: 85 a1 fc ff ff e8 71 be 9c ff 0f 1f 44 00 00 e9 92 fc ff ff e8 62 be 9c ff 0f 0b b8 fb ff ff ff e9 fc f8 ff ff e8 51 be 9c ff <0f> 0b e9 2b fc ff ff e8 45 be 9c ff 0f 0b e9 e1 fb ff ff e8 39 be
RSP: 0018:ffff888060a37ab0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888060a37bb0 RCX: 0000000000000000
RDX: ffff88807e19a900 RSI: ffffffff81a7da7f RDI: ffff888060a37be0
RBP: 7fffffffffffffff R08: 0000000000000000 R09: ffff888060a37c20
R10: ffff888060a37c67 R11: ffffed100c146f8c R12: 7fffffffffffffff
R13: 0000000000000000 R14: ffff888060a37bd8 R15: ffff888060a37c20
FS:  00007fd3cca01540(0000) GS:ffff888108780000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010820 CR3: 0000000054b92000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 iomap_fiemap+0x1c9/0x2f0
 erofs_fiemap+0x64/0x90 [erofs]
 do_vfs_ioctl+0x40d/0x12e0
 __x64_sys_ioctl+0xaa/0x1c0
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
 </TASK>
---[ end trace 0000000000000000 ]---
watchdog: BUG: soft lockup - CPU#7 stuck for 26s! [iomap:905]

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guo Xuenan <guoxuenan@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[djwong: fix some typos]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ioctl.c b/fs/ioctl.c
index 504e69578112..e0a3455f9a0f 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -173,7 +173,7 @@ int fiemap_prep(struct inode *inode, struct fiemap_extent_info *fieinfo,
 
 	if (*len == 0)
 		return -EINVAL;
-	if (start > maxbytes)
+	if (start >= maxbytes)
 		return -EFBIG;
 
 	/*
-- 
2.35.1

[PATCH 5.15 038/132] MIPS: lantiq: check the return value of kzalloc()

[Greg Kroah-Hartman]

From: Xiaoke Wang <xkernel.wang@foxmail.com>

[ Upstream commit 34123208bbcc8c884a0489f543a23fe9eebb5514 ]

kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check the
return value of it to prevent potential wrong memory access or
memory leak.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/lantiq/falcon/sysctrl.c |  2 ++
 arch/mips/lantiq/xway/gptu.c      |  2 ++
 arch/mips/lantiq/xway/sysctrl.c   | 46 ++++++++++++++++++++-----------
 3 files changed, 34 insertions(+), 16 deletions(-)

diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
index 42222f849bd2..446a2536999b 100644
--- a/arch/mips/lantiq/falcon/sysctrl.c
+++ b/arch/mips/lantiq/falcon/sysctrl.c
@@ -167,6 +167,8 @@ static inline void clkdev_add_sys(const char *dev, unsigned int module,
 {
 	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
 
+	if (!clk)
+		return;
 	clk->cl.dev_id = dev;
 	clk->cl.con_id = NULL;
 	clk->cl.clk = clk;
diff --git a/arch/mips/lantiq/xway/gptu.c b/arch/mips/lantiq/xway/gptu.c
index 3d5683e75cf1..200fe9ff641d 100644
--- a/arch/mips/lantiq/xway/gptu.c
+++ b/arch/mips/lantiq/xway/gptu.c
@@ -122,6 +122,8 @@ static inline void clkdev_add_gptu(struct device *dev, const char *con,
 {
 	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
 
+	if (!clk)
+		return;
 	clk->cl.dev_id = dev_name(dev);
 	clk->cl.con_id = con;
 	clk->cl.clk = clk;
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index 917fac1636b7..084f6caba5f2 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -315,6 +315,8 @@ static void clkdev_add_pmu(const char *dev, const char *con, bool deactivate,
 {
 	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
 
+	if (!clk)
+		return;
 	clk->cl.dev_id = dev;
 	clk->cl.con_id = con;
 	clk->cl.clk = clk;
@@ -338,6 +340,8 @@ static void clkdev_add_cgu(const char *dev, const char *con,
 {
 	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
 
+	if (!clk)
+		return;
 	clk->cl.dev_id = dev;
 	clk->cl.con_id = con;
 	clk->cl.clk = clk;
@@ -356,24 +360,28 @@ static void clkdev_add_pci(void)
 	struct clk *clk_ext = kzalloc(sizeof(struct clk), GFP_KERNEL);
 
 	/* main pci clock */
-	clk->cl.dev_id = "17000000.pci";
-	clk->cl.con_id = NULL;
-	clk->cl.clk = clk;
-	clk->rate = CLOCK_33M;
-	clk->rates = valid_pci_rates;
-	clk->enable = pci_enable;
-	clk->disable = pmu_disable;
-	clk->module = 0;
-	clk->bits = PMU_PCI;
-	clkdev_add(&clk->cl);
+	if (clk) {
+		clk->cl.dev_id = "17000000.pci";
+		clk->cl.con_id = NULL;
+		clk->cl.clk = clk;
+		clk->rate = CLOCK_33M;
+		clk->rates = valid_pci_rates;
+		clk->enable = pci_enable;
+		clk->disable = pmu_disable;
+		clk->module = 0;
+		clk->bits = PMU_PCI;
+		clkdev_add(&clk->cl);
+	}
 
 	/* use internal/external bus clock */
-	clk_ext->cl.dev_id = "17000000.pci";
-	clk_ext->cl.con_id = "external";
-	clk_ext->cl.clk = clk_ext;
-	clk_ext->enable = pci_ext_enable;
-	clk_ext->disable = pci_ext_disable;
-	clkdev_add(&clk_ext->cl);
+	if (clk_ext) {
+		clk_ext->cl.dev_id = "17000000.pci";
+		clk_ext->cl.con_id = "external";
+		clk_ext->cl.clk = clk_ext;
+		clk_ext->enable = pci_ext_enable;
+		clk_ext->disable = pci_ext_disable;
+		clkdev_add(&clk_ext->cl);
+	}
 }
 
 /* xway socs can generate clocks on gpio pins */
@@ -393,9 +401,15 @@ static void clkdev_add_clkout(void)
 		char *name;
 
 		name = kzalloc(sizeof("clkout0"), GFP_KERNEL);
+		if (!name)
+			continue;
 		sprintf(name, "clkout%d", i);
 
 		clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
+		if (!clk) {
+			kfree(name);
+			continue;
+		}
 		clk->cl.dev_id = "1f103000.cgu";
 		clk->cl.con_id = name;
 		clk->cl.clk = clk;
-- 
2.35.1

[PATCH 5.15 039/132] drbd: remove usage of list iterator variable after loop

[Greg Kroah-Hartman]

From: Jakob Koschel <jakobkoschel@gmail.com>

[ Upstream commit 901aeda62efa21f2eae937bccb71b49ae531be06 ]

In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to iterate through the list [1].

Since that variable should not be used past the loop iteration, a
separate variable is used to 'remember the current location within the
loop'.

To either continue iterating from that position or skip the iteration
(if the previous iteration was complete) list_prepare_entry() is used.

Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220331220349.885126-1-jakobkoschel@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/drbd/drbd_main.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 548e0dd53528..6db0333b5b7a 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -171,7 +171,7 @@ void tl_release(struct drbd_connection *connection, unsigned int barrier_nr,
 		unsigned int set_size)
 {
 	struct drbd_request *r;
-	struct drbd_request *req = NULL;
+	struct drbd_request *req = NULL, *tmp = NULL;
 	int expect_epoch = 0;
 	int expect_size = 0;
 
@@ -225,8 +225,11 @@ void tl_release(struct drbd_connection *connection, unsigned int barrier_nr,
 	 * to catch requests being barrier-acked "unexpectedly".
 	 * It usually should find the same req again, or some READ preceding it. */
 	list_for_each_entry(req, &connection->transfer_log, tl_requests)
-		if (req->epoch == expect_epoch)
+		if (req->epoch == expect_epoch) {
+			tmp = req;
 			break;
+		}
+	req = list_prepare_entry(tmp, &connection->transfer_log, tl_requests);
 	list_for_each_entry_safe_from(req, r, &connection->transfer_log, tl_requests) {
 		if (req->epoch != expect_epoch)
 			break;
-- 
2.35.1

[PATCH 5.15 040/132] platform/chrome: cros_ec_debugfs: detach log reader wq from devm

[Greg Kroah-Hartman]

From: Tzung-Bi Shih <tzungbi@google.com>

[ Upstream commit 0e8eb5e8acbad19ac2e1856b2fb2320184299b33 ]

Debugfs console_log uses devm memory (e.g. debug_info in
cros_ec_console_log_poll()).  However, lifecycles of device and debugfs
are independent.  An use-after-free issue is observed if userland
program operates the debugfs after the memory has been freed.

The call trace:
 do_raw_spin_lock
 _raw_spin_lock_irqsave
 remove_wait_queue
 ep_unregister_pollwait
 ep_remove
 do_epoll_ctl

A Python example to reproduce the issue:
... import select
... p = select.epoll()
... f = open('/sys/kernel/debug/cros_scp/console_log')
... p.register(f, select.POLLIN)
... p.poll(1)
[(4, 1)]                    # 4=fd, 1=select.POLLIN

[ shutdown cros_scp at the point ]

... p.poll(1)
[(4, 16)]                   # 4=fd, 16=select.POLLHUP
... p.unregister(f)

An use-after-free issue raises here.  It called epoll_ctl with
EPOLL_CTL_DEL which in turn to use the workqueue in the devm (i.e.
log_wq).

Detaches log reader's workqueue from devm to make sure it is persistent
even if the device has been removed.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Link: https://lore.kernel.org/r/20220209051130.386175-1-tzungbi@google.com
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/chrome/cros_ec_debugfs.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/platform/chrome/cros_ec_debugfs.c b/drivers/platform/chrome/cros_ec_debugfs.c
index 272c89837d74..0dbceee87a4b 100644
--- a/drivers/platform/chrome/cros_ec_debugfs.c
+++ b/drivers/platform/chrome/cros_ec_debugfs.c
@@ -25,6 +25,9 @@
 
 #define CIRC_ADD(idx, size, value)	(((idx) + (value)) & ((size) - 1))
 
+/* waitqueue for log readers */
+static DECLARE_WAIT_QUEUE_HEAD(cros_ec_debugfs_log_wq);
+
 /**
  * struct cros_ec_debugfs - EC debugging information.
  *
@@ -33,7 +36,6 @@
  * @log_buffer: circular buffer for console log information
  * @read_msg: preallocated EC command and buffer to read console log
  * @log_mutex: mutex to protect circular buffer
- * @log_wq: waitqueue for log readers
  * @log_poll_work: recurring task to poll EC for new console log data
  * @panicinfo_blob: panicinfo debugfs blob
  */
@@ -44,7 +46,6 @@ struct cros_ec_debugfs {
 	struct circ_buf log_buffer;
 	struct cros_ec_command *read_msg;
 	struct mutex log_mutex;
-	wait_queue_head_t log_wq;
 	struct delayed_work log_poll_work;
 	/* EC panicinfo */
 	struct debugfs_blob_wrapper panicinfo_blob;
@@ -107,7 +108,7 @@ static void cros_ec_console_log_work(struct work_struct *__work)
 			buf_space--;
 		}
 
-		wake_up(&debug_info->log_wq);
+		wake_up(&cros_ec_debugfs_log_wq);
 	}
 
 	mutex_unlock(&debug_info->log_mutex);
@@ -141,7 +142,7 @@ static ssize_t cros_ec_console_log_read(struct file *file, char __user *buf,
 
 		mutex_unlock(&debug_info->log_mutex);
 
-		ret = wait_event_interruptible(debug_info->log_wq,
+		ret = wait_event_interruptible(cros_ec_debugfs_log_wq,
 					CIRC_CNT(cb->head, cb->tail, LOG_SIZE));
 		if (ret < 0)
 			return ret;
@@ -173,7 +174,7 @@ static __poll_t cros_ec_console_log_poll(struct file *file,
 	struct cros_ec_debugfs *debug_info = file->private_data;
 	__poll_t mask = 0;
 
-	poll_wait(file, &debug_info->log_wq, wait);
+	poll_wait(file, &cros_ec_debugfs_log_wq, wait);
 
 	mutex_lock(&debug_info->log_mutex);
 	if (CIRC_CNT(debug_info->log_buffer.head,
@@ -377,7 +378,6 @@ static int cros_ec_create_console_log(struct cros_ec_debugfs *debug_info)
 	debug_info->log_buffer.tail = 0;
 
 	mutex_init(&debug_info->log_mutex);
-	init_waitqueue_head(&debug_info->log_wq);
 
 	debugfs_create_file("console_log", S_IFREG | 0444, debug_info->dir,
 			    debug_info, &cros_ec_console_log_fops);
-- 
2.35.1

[PATCH 5.15 041/132] ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame()

[Greg Kroah-Hartman]

From: linyujun <linyujun809@huawei.com>

[ Upstream commit 9be4c88bb7924f68f88cfd47d925c2d046f51a73 ]

The following KASAN warning is detected by QEMU.

==================================================================
BUG: KASAN: stack-out-of-bounds in unwind_frame+0x508/0x870
Read of size 4 at addr c36bba90 by task cat/163

CPU: 1 PID: 163 Comm: cat Not tainted 5.10.0-rc1 #40
Hardware name: ARM-Versatile Express
[<c0113fac>] (unwind_backtrace) from [<c010e71c>] (show_stack+0x10/0x14)
[<c010e71c>] (show_stack) from [<c0b805b4>] (dump_stack+0x98/0xb0)
[<c0b805b4>] (dump_stack) from [<c0b7d658>] (print_address_description.constprop.0+0x58/0x4bc)
[<c0b7d658>] (print_address_description.constprop.0) from [<c031435c>] (kasan_report+0x154/0x170)
[<c031435c>] (kasan_report) from [<c0113c44>] (unwind_frame+0x508/0x870)
[<c0113c44>] (unwind_frame) from [<c010e298>] (__save_stack_trace+0x110/0x134)
[<c010e298>] (__save_stack_trace) from [<c01ce0d8>] (stack_trace_save+0x8c/0xb4)
[<c01ce0d8>] (stack_trace_save) from [<c0313520>] (kasan_set_track+0x38/0x60)
[<c0313520>] (kasan_set_track) from [<c0314cb8>] (kasan_set_free_info+0x20/0x2c)
[<c0314cb8>] (kasan_set_free_info) from [<c0313474>] (__kasan_slab_free+0xec/0x120)
[<c0313474>] (__kasan_slab_free) from [<c0311e20>] (kmem_cache_free+0x7c/0x334)
[<c0311e20>] (kmem_cache_free) from [<c01c35dc>] (rcu_core+0x390/0xccc)
[<c01c35dc>] (rcu_core) from [<c01013a8>] (__do_softirq+0x180/0x518)
[<c01013a8>] (__do_softirq) from [<c0135214>] (irq_exit+0x9c/0xe0)
[<c0135214>] (irq_exit) from [<c01a40e4>] (__handle_domain_irq+0xb0/0x110)
[<c01a40e4>] (__handle_domain_irq) from [<c0691248>] (gic_handle_irq+0xa0/0xb8)
[<c0691248>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x94)
Exception stack(0xc36bb928 to 0xc36bb970)
b920:                   c36bb9c0 00000000 c0126919 c0101228 c36bb9c0 b76d7730
b940: c36b8000 c36bb9a0 c3335b00 c01ce0d8 00000003 c36bba3c c36bb940 c36bb978
b960: c010e298 c011373c 60000013 ffffffff
[<c0100b0c>] (__irq_svc) from [<c011373c>] (unwind_frame+0x0/0x870)
[<c011373c>] (unwind_frame) from [<00000000>] (0x0)

The buggy address belongs to the page:
page:(ptrval) refcount:0 mapcount:0 mapping:00000000 index:0x0 pfn:0x636bb
flags: 0x0()
raw: 00000000 00000000 ef867764 00000000 00000000 00000000 ffffffff 00000000
page dumped because: kasan: bad access detected

addr c36bba90 is located in stack of task cat/163 at offset 48 in frame:
 stack_trace_save+0x0/0xb4

this frame has 1 object:
 [32, 48) 'trace'

Memory state around the buggy address:
 c36bb980: f1 f1 f1 f1 00 04 f2 f2 00 00 f3 f3 00 00 00 00
 c36bba00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
>c36bba80: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
                 ^
 c36bbb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 c36bbb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

There is a same issue on x86 and has been resolved by the commit f7d27c35ddff
("x86/mm, kasan: Silence KASAN warnings in get_wchan()").
The solution could be applied to arm architecture too.

Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Reported-by: He Ying <heying24@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/stacktrace.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index db798eac7431..824774999825 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -53,17 +53,17 @@ int notrace unwind_frame(struct stackframe *frame)
 		return -EINVAL;
 
 	frame->sp = frame->fp;
-	frame->fp = *(unsigned long *)(fp);
-	frame->pc = *(unsigned long *)(fp + 4);
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 4));
 #else
 	/* check current frame pointer is within bounds */
 	if (fp < low + 12 || fp > high - 4)
 		return -EINVAL;
 
 	/* restore the registers from the stack frame */
-	frame->fp = *(unsigned long *)(fp - 12);
-	frame->sp = *(unsigned long *)(fp - 8);
-	frame->pc = *(unsigned long *)(fp - 4);
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 12));
+	frame->sp = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 8));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp - 4));
 #endif
 
 	return 0;
-- 
2.35.1

[PATCH 5.15 042/132] nilfs2: fix lockdep warnings in page operations for btree nodes

[Greg Kroah-Hartman]

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

[ Upstream commit e897be17a441fa637cd166fc3de1445131e57692 ]

Patch series "nilfs2 lockdep warning fixes".

The first two are to resolve the lockdep warning issue, and the last one
is the accompanying cleanup and low priority.

Based on your comment, this series solves the issue by separating inode
object as needed.  Since I was worried about the impact of the object
composition changes, I tested the series carefully not to cause
regressions especially for delicate functions such like disk space
reclamation and snapshots.

This patch (of 3):

If CONFIG_LOCKDEP is enabled, nilfs2 hits lockdep warnings at
inode_to_wb() during page/folio operations for btree nodes:

  WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 inode_to_wb include/linux/backing-dev.h:269 [inline]
  WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 folio_account_dirtied mm/page-writeback.c:2460 [inline]
  WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 __folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509
  Modules linked in:
  ...
  RIP: 0010:inode_to_wb include/linux/backing-dev.h:269 [inline]
  RIP: 0010:folio_account_dirtied mm/page-writeback.c:2460 [inline]
  RIP: 0010:__folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509
  ...
  Call Trace:
    __set_page_dirty include/linux/pagemap.h:834 [inline]
    mark_buffer_dirty+0x4e6/0x650 fs/buffer.c:1145
    nilfs_btree_propagate_p fs/nilfs2/btree.c:1889 [inline]
    nilfs_btree_propagate+0x4ae/0xea0 fs/nilfs2/btree.c:2085
    nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337
    nilfs_collect_dat_data+0x45/0xd0 fs/nilfs2/segment.c:625
    nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1009
    nilfs_segctor_scan_file+0x47a/0x700 fs/nilfs2/segment.c:1048
    nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1224 [inline]
    nilfs_segctor_collect fs/nilfs2/segment.c:1494 [inline]
    nilfs_segctor_do_construct+0x14f3/0x6c60 fs/nilfs2/segment.c:2036
    nilfs_segctor_construct+0x7a7/0xb30 fs/nilfs2/segment.c:2372
    nilfs_segctor_thread_construct fs/nilfs2/segment.c:2480 [inline]
    nilfs_segctor_thread+0x3c3/0xf90 fs/nilfs2/segment.c:2563
    kthread+0x405/0x4f0 kernel/kthread.c:327
    ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295

This is because nilfs2 uses two page caches for each inode and
inode->i_mapping never points to one of them, the btree node cache.

This causes inode_to_wb(inode) to refer to a different page cache than
the caller page/folio operations such like __folio_start_writeback(),
__folio_end_writeback(), or __folio_mark_dirty() acquired the lock.

This patch resolves the issue by allocating and using an additional
inode to hold the page cache of btree nodes.  The inode is attached
one-to-one to the traditional nilfs2 inode if it requires a block
mapping with b-tree.  This setup change is in memory only and does not
affect the disk format.

Link: https://lkml.kernel.org/r/1647867427-30498-1-git-send-email-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/1647867427-30498-2-git-send-email-konishi.ryusuke@gmail.com
Link: https://lore.kernel.org/r/YXrYvIo8YRnAOJCj@casper.infradead.org
Link: https://lore.kernel.org/r/9a20b33d-b38f-b4a2-4742-c1eb5b8e4d6c@redhat.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+0d5b462a6f07447991b3@syzkaller.appspotmail.com
Reported-by: syzbot+34ef28bb2aeb28724aa0@syzkaller.appspotmail.com
Reported-by: Hao Sun <sunhao.th@gmail.com>
Reported-by: David Hildenbrand <david@redhat.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nilfs2/btnode.c  |  23 ++++++++--
 fs/nilfs2/btnode.h  |   1 +
 fs/nilfs2/btree.c   |  27 ++++++++----
 fs/nilfs2/gcinode.c |   7 +--
 fs/nilfs2/inode.c   | 104 ++++++++++++++++++++++++++++++++++++++------
 fs/nilfs2/mdt.c     |   7 +--
 fs/nilfs2/nilfs.h   |  14 +++---
 fs/nilfs2/page.c    |   7 ++-
 fs/nilfs2/segment.c |   9 ++--
 fs/nilfs2/super.c   |   5 +--
 10 files changed, 154 insertions(+), 50 deletions(-)

diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c
index 4391fd3abd8f..e00e184b1261 100644
--- a/fs/nilfs2/btnode.c
+++ b/fs/nilfs2/btnode.c
@@ -20,6 +20,23 @@
 #include "page.h"
 #include "btnode.h"
 
+
+/**
+ * nilfs_init_btnc_inode - initialize B-tree node cache inode
+ * @btnc_inode: inode to be initialized
+ *
+ * nilfs_init_btnc_inode() sets up an inode for B-tree node cache.
+ */
+void nilfs_init_btnc_inode(struct inode *btnc_inode)
+{
+	struct nilfs_inode_info *ii = NILFS_I(btnc_inode);
+
+	btnc_inode->i_mode = S_IFREG;
+	ii->i_flags = 0;
+	memset(&ii->i_bmap_data, 0, sizeof(struct nilfs_bmap));
+	mapping_set_gfp_mask(btnc_inode->i_mapping, GFP_NOFS);
+}
+
 void nilfs_btnode_cache_clear(struct address_space *btnc)
 {
 	invalidate_mapping_pages(btnc, 0, -1);
@@ -29,7 +46,7 @@ void nilfs_btnode_cache_clear(struct address_space *btnc)
 struct buffer_head *
 nilfs_btnode_create_block(struct address_space *btnc, __u64 blocknr)
 {
-	struct inode *inode = NILFS_BTNC_I(btnc);
+	struct inode *inode = btnc->host;
 	struct buffer_head *bh;
 
 	bh = nilfs_grab_buffer(inode, btnc, blocknr, BIT(BH_NILFS_Node));
@@ -57,7 +74,7 @@ int nilfs_btnode_submit_block(struct address_space *btnc, __u64 blocknr,
 			      struct buffer_head **pbh, sector_t *submit_ptr)
 {
 	struct buffer_head *bh;
-	struct inode *inode = NILFS_BTNC_I(btnc);
+	struct inode *inode = btnc->host;
 	struct page *page;
 	int err;
 
@@ -157,7 +174,7 @@ int nilfs_btnode_prepare_change_key(struct address_space *btnc,
 				    struct nilfs_btnode_chkey_ctxt *ctxt)
 {
 	struct buffer_head *obh, *nbh;
-	struct inode *inode = NILFS_BTNC_I(btnc);
+	struct inode *inode = btnc->host;
 	__u64 oldkey = ctxt->oldkey, newkey = ctxt->newkey;
 	int err;
 
diff --git a/fs/nilfs2/btnode.h b/fs/nilfs2/btnode.h
index 0f88dbc9bcb3..05ab64d354dc 100644
--- a/fs/nilfs2/btnode.h
+++ b/fs/nilfs2/btnode.h
@@ -30,6 +30,7 @@ struct nilfs_btnode_chkey_ctxt {
 	struct buffer_head *newbh;
 };
 
+void nilfs_init_btnc_inode(struct inode *btnc_inode);
 void nilfs_btnode_cache_clear(struct address_space *);
 struct buffer_head *nilfs_btnode_create_block(struct address_space *btnc,
 					      __u64 blocknr);
diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c
index ab9ec073330f..2301b57ca17f 100644
--- a/fs/nilfs2/btree.c
+++ b/fs/nilfs2/btree.c
@@ -58,7 +58,8 @@ static void nilfs_btree_free_path(struct nilfs_btree_path *path)
 static int nilfs_btree_get_new_block(const struct nilfs_bmap *btree,
 				     __u64 ptr, struct buffer_head **bhp)
 {
-	struct address_space *btnc = &NILFS_BMAP_I(btree)->i_btnode_cache;
+	struct inode *btnc_inode = NILFS_BMAP_I(btree)->i_assoc_inode;
+	struct address_space *btnc = btnc_inode->i_mapping;
 	struct buffer_head *bh;
 
 	bh = nilfs_btnode_create_block(btnc, ptr);
@@ -470,7 +471,8 @@ static int __nilfs_btree_get_block(const struct nilfs_bmap *btree, __u64 ptr,
 				   struct buffer_head **bhp,
 				   const struct nilfs_btree_readahead_info *ra)
 {
-	struct address_space *btnc = &NILFS_BMAP_I(btree)->i_btnode_cache;
+	struct inode *btnc_inode = NILFS_BMAP_I(btree)->i_assoc_inode;
+	struct address_space *btnc = btnc_inode->i_mapping;
 	struct buffer_head *bh, *ra_bh;
 	sector_t submit_ptr = 0;
 	int ret;
@@ -1741,6 +1743,10 @@ nilfs_btree_prepare_convert_and_insert(struct nilfs_bmap *btree, __u64 key,
 		dat = nilfs_bmap_get_dat(btree);
 	}
 
+	ret = nilfs_attach_btree_node_cache(&NILFS_BMAP_I(btree)->vfs_inode);
+	if (ret < 0)
+		return ret;
+
 	ret = nilfs_bmap_prepare_alloc_ptr(btree, dreq, dat);
 	if (ret < 0)
 		return ret;
@@ -1913,7 +1919,7 @@ static int nilfs_btree_prepare_update_v(struct nilfs_bmap *btree,
 		path[level].bp_ctxt.newkey = path[level].bp_newreq.bpr_ptr;
 		path[level].bp_ctxt.bh = path[level].bp_bh;
 		ret = nilfs_btnode_prepare_change_key(
-			&NILFS_BMAP_I(btree)->i_btnode_cache,
+			NILFS_BMAP_I(btree)->i_assoc_inode->i_mapping,
 			&path[level].bp_ctxt);
 		if (ret < 0) {
 			nilfs_dat_abort_update(dat,
@@ -1939,7 +1945,7 @@ static void nilfs_btree_commit_update_v(struct nilfs_bmap *btree,
 
 	if (buffer_nilfs_node(path[level].bp_bh)) {
 		nilfs_btnode_commit_change_key(
-			&NILFS_BMAP_I(btree)->i_btnode_cache,
+			NILFS_BMAP_I(btree)->i_assoc_inode->i_mapping,
 			&path[level].bp_ctxt);
 		path[level].bp_bh = path[level].bp_ctxt.bh;
 	}
@@ -1958,7 +1964,7 @@ static void nilfs_btree_abort_update_v(struct nilfs_bmap *btree,
 			       &path[level].bp_newreq.bpr_req);
 	if (buffer_nilfs_node(path[level].bp_bh))
 		nilfs_btnode_abort_change_key(
-			&NILFS_BMAP_I(btree)->i_btnode_cache,
+			NILFS_BMAP_I(btree)->i_assoc_inode->i_mapping,
 			&path[level].bp_ctxt);
 }
 
@@ -2134,7 +2140,8 @@ static void nilfs_btree_add_dirty_buffer(struct nilfs_bmap *btree,
 static void nilfs_btree_lookup_dirty_buffers(struct nilfs_bmap *btree,
 					     struct list_head *listp)
 {
-	struct address_space *btcache = &NILFS_BMAP_I(btree)->i_btnode_cache;
+	struct inode *btnc_inode = NILFS_BMAP_I(btree)->i_assoc_inode;
+	struct address_space *btcache = btnc_inode->i_mapping;
 	struct list_head lists[NILFS_BTREE_LEVEL_MAX];
 	struct pagevec pvec;
 	struct buffer_head *bh, *head;
@@ -2188,12 +2195,12 @@ static int nilfs_btree_assign_p(struct nilfs_bmap *btree,
 		path[level].bp_ctxt.newkey = blocknr;
 		path[level].bp_ctxt.bh = *bh;
 		ret = nilfs_btnode_prepare_change_key(
-			&NILFS_BMAP_I(btree)->i_btnode_cache,
+			NILFS_BMAP_I(btree)->i_assoc_inode->i_mapping,
 			&path[level].bp_ctxt);
 		if (ret < 0)
 			return ret;
 		nilfs_btnode_commit_change_key(
-			&NILFS_BMAP_I(btree)->i_btnode_cache,
+			NILFS_BMAP_I(btree)->i_assoc_inode->i_mapping,
 			&path[level].bp_ctxt);
 		*bh = path[level].bp_ctxt.bh;
 	}
@@ -2398,6 +2405,10 @@ int nilfs_btree_init(struct nilfs_bmap *bmap)
 
 	if (nilfs_btree_root_broken(nilfs_btree_get_root(bmap), bmap->b_inode))
 		ret = -EIO;
+	else
+		ret = nilfs_attach_btree_node_cache(
+			&NILFS_BMAP_I(bmap)->vfs_inode);
+
 	return ret;
 }
 
diff --git a/fs/nilfs2/gcinode.c b/fs/nilfs2/gcinode.c
index 448320496856..aadea660c66c 100644
--- a/fs/nilfs2/gcinode.c
+++ b/fs/nilfs2/gcinode.c
@@ -126,9 +126,10 @@ int nilfs_gccache_submit_read_data(struct inode *inode, sector_t blkoff,
 int nilfs_gccache_submit_read_node(struct inode *inode, sector_t pbn,
 				   __u64 vbn, struct buffer_head **out_bh)
 {
+	struct inode *btnc_inode = NILFS_I(inode)->i_assoc_inode;
 	int ret;
 
-	ret = nilfs_btnode_submit_block(&NILFS_I(inode)->i_btnode_cache,
+	ret = nilfs_btnode_submit_block(btnc_inode->i_mapping,
 					vbn ? : pbn, pbn, REQ_OP_READ, 0,
 					out_bh, &pbn);
 	if (ret == -EEXIST) /* internal code (cache hit) */
@@ -170,7 +171,7 @@ int nilfs_init_gcinode(struct inode *inode)
 	ii->i_flags = 0;
 	nilfs_bmap_init_gc(ii->i_bmap);
 
-	return 0;
+	return nilfs_attach_btree_node_cache(inode);
 }
 
 /**
@@ -185,7 +186,7 @@ void nilfs_remove_all_gcinodes(struct the_nilfs *nilfs)
 		ii = list_first_entry(head, struct nilfs_inode_info, i_dirty);
 		list_del_init(&ii->i_dirty);
 		truncate_inode_pages(&ii->vfs_inode.i_data, 0);
-		nilfs_btnode_cache_clear(&ii->i_btnode_cache);
+		nilfs_btnode_cache_clear(ii->i_assoc_inode->i_mapping);
 		iput(&ii->vfs_inode);
 	}
 }
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 2e8eb263cf0f..7b2bc4173313 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -29,12 +29,14 @@
  * @cno: checkpoint number
  * @root: pointer on NILFS root object (mounted checkpoint)
  * @for_gc: inode for GC flag
+ * @for_btnc: inode for B-tree node cache flag
  */
 struct nilfs_iget_args {
 	u64 ino;
 	__u64 cno;
 	struct nilfs_root *root;
-	int for_gc;
+	bool for_gc;
+	bool for_btnc;
 };
 
 static int nilfs_iget_test(struct inode *inode, void *opaque);
@@ -314,7 +316,8 @@ static int nilfs_insert_inode_locked(struct inode *inode,
 				     unsigned long ino)
 {
 	struct nilfs_iget_args args = {
-		.ino = ino, .root = root, .cno = 0, .for_gc = 0
+		.ino = ino, .root = root, .cno = 0, .for_gc = false,
+		.for_btnc = false
 	};
 
 	return insert_inode_locked4(inode, ino, nilfs_iget_test, &args);
@@ -527,6 +530,13 @@ static int nilfs_iget_test(struct inode *inode, void *opaque)
 		return 0;
 
 	ii = NILFS_I(inode);
+	if (test_bit(NILFS_I_BTNC, &ii->i_state)) {
+		if (!args->for_btnc)
+			return 0;
+	} else if (args->for_btnc) {
+		return 0;
+	}
+
 	if (!test_bit(NILFS_I_GCINODE, &ii->i_state))
 		return !args->for_gc;
 
@@ -538,15 +548,15 @@ static int nilfs_iget_set(struct inode *inode, void *opaque)
 	struct nilfs_iget_args *args = opaque;
 
 	inode->i_ino = args->ino;
-	if (args->for_gc) {
+	NILFS_I(inode)->i_cno = args->cno;
+	NILFS_I(inode)->i_root = args->root;
+	if (args->root && args->ino == NILFS_ROOT_INO)
+		nilfs_get_root(args->root);
+
+	if (args->for_gc)
 		NILFS_I(inode)->i_state = BIT(NILFS_I_GCINODE);
-		NILFS_I(inode)->i_cno = args->cno;
-		NILFS_I(inode)->i_root = NULL;
-	} else {
-		if (args->root && args->ino == NILFS_ROOT_INO)
-			nilfs_get_root(args->root);
-		NILFS_I(inode)->i_root = args->root;
-	}
+	if (args->for_btnc)
+		NILFS_I(inode)->i_state |= BIT(NILFS_I_BTNC);
 	return 0;
 }
 
@@ -554,7 +564,8 @@ struct inode *nilfs_ilookup(struct super_block *sb, struct nilfs_root *root,
 			    unsigned long ino)
 {
 	struct nilfs_iget_args args = {
-		.ino = ino, .root = root, .cno = 0, .for_gc = 0
+		.ino = ino, .root = root, .cno = 0, .for_gc = false,
+		.for_btnc = false
 	};
 
 	return ilookup5(sb, ino, nilfs_iget_test, &args);
@@ -564,7 +575,8 @@ struct inode *nilfs_iget_locked(struct super_block *sb, struct nilfs_root *root,
 				unsigned long ino)
 {
 	struct nilfs_iget_args args = {
-		.ino = ino, .root = root, .cno = 0, .for_gc = 0
+		.ino = ino, .root = root, .cno = 0, .for_gc = false,
+		.for_btnc = false
 	};
 
 	return iget5_locked(sb, ino, nilfs_iget_test, nilfs_iget_set, &args);
@@ -595,7 +607,8 @@ struct inode *nilfs_iget_for_gc(struct super_block *sb, unsigned long ino,
 				__u64 cno)
 {
 	struct nilfs_iget_args args = {
-		.ino = ino, .root = NULL, .cno = cno, .for_gc = 1
+		.ino = ino, .root = NULL, .cno = cno, .for_gc = true,
+		.for_btnc = false
 	};
 	struct inode *inode;
 	int err;
@@ -615,6 +628,68 @@ struct inode *nilfs_iget_for_gc(struct super_block *sb, unsigned long ino,
 	return inode;
 }
 
+/**
+ * nilfs_attach_btree_node_cache - attach a B-tree node cache to the inode
+ * @inode: inode object
+ *
+ * nilfs_attach_btree_node_cache() attaches a B-tree node cache to @inode,
+ * or does nothing if the inode already has it.  This function allocates
+ * an additional inode to maintain page cache of B-tree nodes one-on-one.
+ *
+ * Return Value: On success, 0 is returned. On errors, one of the following
+ * negative error code is returned.
+ *
+ * %-ENOMEM - Insufficient memory available.
+ */
+int nilfs_attach_btree_node_cache(struct inode *inode)
+{
+	struct nilfs_inode_info *ii = NILFS_I(inode);
+	struct inode *btnc_inode;
+	struct nilfs_iget_args args;
+
+	if (ii->i_assoc_inode)
+		return 0;
+
+	args.ino = inode->i_ino;
+	args.root = ii->i_root;
+	args.cno = ii->i_cno;
+	args.for_gc = test_bit(NILFS_I_GCINODE, &ii->i_state) != 0;
+	args.for_btnc = true;
+
+	btnc_inode = iget5_locked(inode->i_sb, inode->i_ino, nilfs_iget_test,
+				  nilfs_iget_set, &args);
+	if (unlikely(!btnc_inode))
+		return -ENOMEM;
+	if (btnc_inode->i_state & I_NEW) {
+		nilfs_init_btnc_inode(btnc_inode);
+		unlock_new_inode(btnc_inode);
+	}
+	NILFS_I(btnc_inode)->i_assoc_inode = inode;
+	NILFS_I(btnc_inode)->i_bmap = ii->i_bmap;
+	ii->i_assoc_inode = btnc_inode;
+
+	return 0;
+}
+
+/**
+ * nilfs_detach_btree_node_cache - detach the B-tree node cache from the inode
+ * @inode: inode object
+ *
+ * nilfs_detach_btree_node_cache() detaches the B-tree node cache and its
+ * holder inode bound to @inode, or does nothing if @inode doesn't have it.
+ */
+void nilfs_detach_btree_node_cache(struct inode *inode)
+{
+	struct nilfs_inode_info *ii = NILFS_I(inode);
+	struct inode *btnc_inode = ii->i_assoc_inode;
+
+	if (btnc_inode) {
+		NILFS_I(btnc_inode)->i_assoc_inode = NULL;
+		ii->i_assoc_inode = NULL;
+		iput(btnc_inode);
+	}
+}
+
 void nilfs_write_inode_common(struct inode *inode,
 			      struct nilfs_inode *raw_inode, int has_bmap)
 {
@@ -762,7 +837,8 @@ static void nilfs_clear_inode(struct inode *inode)
 	if (test_bit(NILFS_I_BMAP, &ii->i_state))
 		nilfs_bmap_clear(ii->i_bmap);
 
-	nilfs_btnode_cache_clear(&ii->i_btnode_cache);
+	if (!test_bit(NILFS_I_BTNC, &ii->i_state))
+		nilfs_detach_btree_node_cache(inode);
 
 	if (ii->i_root && inode->i_ino == NILFS_ROOT_INO)
 		nilfs_put_root(ii->i_root);
diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index 97769fe4d588..21acd2d4b4d4 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -532,7 +532,7 @@ int nilfs_mdt_save_to_shadow_map(struct inode *inode)
 		goto out;
 
 	ret = nilfs_copy_dirty_pages(&shadow->frozen_btnodes,
-				     &ii->i_btnode_cache);
+				     ii->i_assoc_inode->i_mapping);
 	if (ret)
 		goto out;
 
@@ -623,8 +623,9 @@ void nilfs_mdt_restore_from_shadow_map(struct inode *inode)
 	nilfs_clear_dirty_pages(inode->i_mapping, true);
 	nilfs_copy_back_pages(inode->i_mapping, &shadow->frozen_data);
 
-	nilfs_clear_dirty_pages(&ii->i_btnode_cache, true);
-	nilfs_copy_back_pages(&ii->i_btnode_cache, &shadow->frozen_btnodes);
+	nilfs_clear_dirty_pages(ii->i_assoc_inode->i_mapping, true);
+	nilfs_copy_back_pages(ii->i_assoc_inode->i_mapping,
+			      &shadow->frozen_btnodes);
 
 	nilfs_bmap_restore(ii->i_bmap, &shadow->bmap_store);
 
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index 60b21b6eeac0..6c5148de84ff 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -28,7 +28,7 @@
  * @i_xattr: <TODO>
  * @i_dir_start_lookup: page index of last successful search
  * @i_cno: checkpoint number for GC inode
- * @i_btnode_cache: cached pages of b-tree nodes
+ * @i_assoc_inode: associated inode (B-tree node cache holder or back pointer)
  * @i_dirty: list for connecting dirty files
  * @xattr_sem: semaphore for extended attributes processing
  * @i_bh: buffer contains disk inode
@@ -43,7 +43,7 @@ struct nilfs_inode_info {
 	__u64 i_xattr;	/* sector_t ??? */
 	__u32 i_dir_start_lookup;
 	__u64 i_cno;		/* check point number for GC inode */
-	struct address_space i_btnode_cache;
+	struct inode *i_assoc_inode;
 	struct list_head i_dirty;	/* List for connecting dirty files */
 
 #ifdef CONFIG_NILFS_XATTR
@@ -75,13 +75,6 @@ NILFS_BMAP_I(const struct nilfs_bmap *bmap)
 	return container_of(bmap, struct nilfs_inode_info, i_bmap_data);
 }
 
-static inline struct inode *NILFS_BTNC_I(struct address_space *btnc)
-{
-	struct nilfs_inode_info *ii =
-		container_of(btnc, struct nilfs_inode_info, i_btnode_cache);
-	return &ii->vfs_inode;
-}
-
 /*
  * Dynamic state flags of NILFS on-memory inode (i_state)
  */
@@ -98,6 +91,7 @@ enum {
 	NILFS_I_INODE_SYNC,		/* dsync is not allowed for inode */
 	NILFS_I_BMAP,			/* has bmap and btnode_cache */
 	NILFS_I_GCINODE,		/* inode for GC, on memory only */
+	NILFS_I_BTNC,			/* inode for btree node cache */
 };
 
 /*
@@ -267,6 +261,8 @@ struct inode *nilfs_iget(struct super_block *sb, struct nilfs_root *root,
 			 unsigned long ino);
 extern struct inode *nilfs_iget_for_gc(struct super_block *sb,
 				       unsigned long ino, __u64 cno);
+int nilfs_attach_btree_node_cache(struct inode *inode);
+void nilfs_detach_btree_node_cache(struct inode *inode);
 extern void nilfs_update_inode(struct inode *, struct buffer_head *, int);
 extern void nilfs_truncate(struct inode *);
 extern void nilfs_evict_inode(struct inode *);
diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c
index 171fb5cd427f..d1a148f0cae3 100644
--- a/fs/nilfs2/page.c
+++ b/fs/nilfs2/page.c
@@ -448,10 +448,9 @@ void nilfs_mapping_init(struct address_space *mapping, struct inode *inode)
 /*
  * NILFS2 needs clear_page_dirty() in the following two cases:
  *
- * 1) For B-tree node pages and data pages of the dat/gcdat, NILFS2 clears
- *    page dirty flags when it copies back pages from the shadow cache
- *    (gcdat->{i_mapping,i_btnode_cache}) to its original cache
- *    (dat->{i_mapping,i_btnode_cache}).
+ * 1) For B-tree node pages and data pages of DAT file, NILFS2 clears dirty
+ *    flag of pages when it copies back pages from shadow cache to the
+ *    original cache.
  *
  * 2) Some B-tree operations like insertion or deletion may dispose buffers
  *    in dirty state, and this needs to cancel the dirty state of their pages.
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index 686c8ee7b29c..314a23a16689 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -733,15 +733,18 @@ static void nilfs_lookup_dirty_node_buffers(struct inode *inode,
 					    struct list_head *listp)
 {
 	struct nilfs_inode_info *ii = NILFS_I(inode);
-	struct address_space *mapping = &ii->i_btnode_cache;
+	struct inode *btnc_inode = ii->i_assoc_inode;
 	struct pagevec pvec;
 	struct buffer_head *bh, *head;
 	unsigned int i;
 	pgoff_t index = 0;
 
+	if (!btnc_inode)
+		return;
+
 	pagevec_init(&pvec);
 
-	while (pagevec_lookup_tag(&pvec, mapping, &index,
+	while (pagevec_lookup_tag(&pvec, btnc_inode->i_mapping, &index,
 					PAGECACHE_TAG_DIRTY)) {
 		for (i = 0; i < pagevec_count(&pvec); i++) {
 			bh = head = page_buffers(pvec.pages[i]);
@@ -2410,7 +2413,7 @@ nilfs_remove_written_gcinodes(struct the_nilfs *nilfs, struct list_head *head)
 			continue;
 		list_del_init(&ii->i_dirty);
 		truncate_inode_pages(&ii->vfs_inode.i_data, 0);
-		nilfs_btnode_cache_clear(&ii->i_btnode_cache);
+		nilfs_btnode_cache_clear(ii->i_assoc_inode->i_mapping);
 		iput(&ii->vfs_inode);
 	}
 }
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index f6b2d280aab5..2883ab625f61 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -157,7 +157,8 @@ struct inode *nilfs_alloc_inode(struct super_block *sb)
 	ii->i_bh = NULL;
 	ii->i_state = 0;
 	ii->i_cno = 0;
-	nilfs_mapping_init(&ii->i_btnode_cache, &ii->vfs_inode);
+	ii->i_assoc_inode = NULL;
+	ii->i_bmap = &ii->i_bmap_data;
 	return &ii->vfs_inode;
 }
 
@@ -1377,8 +1378,6 @@ static void nilfs_inode_init_once(void *obj)
 #ifdef CONFIG_NILFS_XATTR
 	init_rwsem(&ii->xattr_sem);
 #endif
-	address_space_init_once(&ii->i_btnode_cache);
-	ii->i_bmap = &ii->i_bmap_data;
 	inode_init_once(&ii->vfs_inode);
 }
 
-- 
2.35.1

[PATCH 5.15 043/132] nilfs2: fix lockdep warnings during disk space reclamation

[Greg Kroah-Hartman]

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

[ Upstream commit 6e211930f79aa45d422009a5f2e5467d2369ffe5 ]

During disk space reclamation, nilfs2 still emits the following lockdep
warning due to page/folio operations on shadowed page caches that nilfs2
uses to get a snapshot of DAT file in memory:

  WARNING: CPU: 0 PID: 2643 at include/linux/backing-dev.h:272 __folio_mark_dirty+0x645/0x670
  ...
  RIP: 0010:__folio_mark_dirty+0x645/0x670
  ...
  Call Trace:
    filemap_dirty_folio+0x74/0xd0
    __set_page_dirty_nobuffers+0x85/0xb0
    nilfs_copy_dirty_pages+0x288/0x510 [nilfs2]
    nilfs_mdt_save_to_shadow_map+0x50/0xe0 [nilfs2]
    nilfs_clean_segments+0xee/0x5d0 [nilfs2]
    nilfs_ioctl_clean_segments.isra.19+0xb08/0xf40 [nilfs2]
    nilfs_ioctl+0xc52/0xfb0 [nilfs2]
    __x64_sys_ioctl+0x11d/0x170

This fixes the remaining warning by using inode objects to hold those
page caches.

Link: https://lkml.kernel.org/r/1647867427-30498-3-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nilfs2/dat.c   |  4 ++-
 fs/nilfs2/inode.c | 63 ++++++++++++++++++++++++++++++++++++++++++++---
 fs/nilfs2/mdt.c   | 38 +++++++++++++++++++---------
 fs/nilfs2/mdt.h   |  6 ++---
 fs/nilfs2/nilfs.h |  2 ++
 5 files changed, 92 insertions(+), 21 deletions(-)

diff --git a/fs/nilfs2/dat.c b/fs/nilfs2/dat.c
index 8bccdf1158fc..1a3d183027b9 100644
--- a/fs/nilfs2/dat.c
+++ b/fs/nilfs2/dat.c
@@ -497,7 +497,9 @@ int nilfs_dat_read(struct super_block *sb, size_t entry_size,
 	di = NILFS_DAT_I(dat);
 	lockdep_set_class(&di->mi.mi_sem, &dat_lock_key);
 	nilfs_palloc_setup_cache(dat, &di->palloc_cache);
-	nilfs_mdt_setup_shadow_map(dat, &di->shadow);
+	err = nilfs_mdt_setup_shadow_map(dat, &di->shadow);
+	if (err)
+		goto failed;
 
 	err = nilfs_read_inode_common(dat, raw_inode);
 	if (err)
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 7b2bc4173313..2466f8b8be95 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -30,6 +30,7 @@
  * @root: pointer on NILFS root object (mounted checkpoint)
  * @for_gc: inode for GC flag
  * @for_btnc: inode for B-tree node cache flag
+ * @for_shadow: inode for shadowed page cache flag
  */
 struct nilfs_iget_args {
 	u64 ino;
@@ -37,6 +38,7 @@ struct nilfs_iget_args {
 	struct nilfs_root *root;
 	bool for_gc;
 	bool for_btnc;
+	bool for_shadow;
 };
 
 static int nilfs_iget_test(struct inode *inode, void *opaque);
@@ -317,7 +319,7 @@ static int nilfs_insert_inode_locked(struct inode *inode,
 {
 	struct nilfs_iget_args args = {
 		.ino = ino, .root = root, .cno = 0, .for_gc = false,
-		.for_btnc = false
+		.for_btnc = false, .for_shadow = false
 	};
 
 	return insert_inode_locked4(inode, ino, nilfs_iget_test, &args);
@@ -536,6 +538,12 @@ static int nilfs_iget_test(struct inode *inode, void *opaque)
 	} else if (args->for_btnc) {
 		return 0;
 	}
+	if (test_bit(NILFS_I_SHADOW, &ii->i_state)) {
+		if (!args->for_shadow)
+			return 0;
+	} else if (args->for_shadow) {
+		return 0;
+	}
 
 	if (!test_bit(NILFS_I_GCINODE, &ii->i_state))
 		return !args->for_gc;
@@ -557,6 +565,8 @@ static int nilfs_iget_set(struct inode *inode, void *opaque)
 		NILFS_I(inode)->i_state = BIT(NILFS_I_GCINODE);
 	if (args->for_btnc)
 		NILFS_I(inode)->i_state |= BIT(NILFS_I_BTNC);
+	if (args->for_shadow)
+		NILFS_I(inode)->i_state |= BIT(NILFS_I_SHADOW);
 	return 0;
 }
 
@@ -565,7 +575,7 @@ struct inode *nilfs_ilookup(struct super_block *sb, struct nilfs_root *root,
 {
 	struct nilfs_iget_args args = {
 		.ino = ino, .root = root, .cno = 0, .for_gc = false,
-		.for_btnc = false
+		.for_btnc = false, .for_shadow = false
 	};
 
 	return ilookup5(sb, ino, nilfs_iget_test, &args);
@@ -576,7 +586,7 @@ struct inode *nilfs_iget_locked(struct super_block *sb, struct nilfs_root *root,
 {
 	struct nilfs_iget_args args = {
 		.ino = ino, .root = root, .cno = 0, .for_gc = false,
-		.for_btnc = false
+		.for_btnc = false, .for_shadow = false
 	};
 
 	return iget5_locked(sb, ino, nilfs_iget_test, nilfs_iget_set, &args);
@@ -608,7 +618,7 @@ struct inode *nilfs_iget_for_gc(struct super_block *sb, unsigned long ino,
 {
 	struct nilfs_iget_args args = {
 		.ino = ino, .root = NULL, .cno = cno, .for_gc = true,
-		.for_btnc = false
+		.for_btnc = false, .for_shadow = false
 	};
 	struct inode *inode;
 	int err;
@@ -655,6 +665,7 @@ int nilfs_attach_btree_node_cache(struct inode *inode)
 	args.cno = ii->i_cno;
 	args.for_gc = test_bit(NILFS_I_GCINODE, &ii->i_state) != 0;
 	args.for_btnc = true;
+	args.for_shadow = test_bit(NILFS_I_SHADOW, &ii->i_state) != 0;
 
 	btnc_inode = iget5_locked(inode->i_sb, inode->i_ino, nilfs_iget_test,
 				  nilfs_iget_set, &args);
@@ -690,6 +701,50 @@ void nilfs_detach_btree_node_cache(struct inode *inode)
 	}
 }
 
+/**
+ * nilfs_iget_for_shadow - obtain inode for shadow mapping
+ * @inode: inode object that uses shadow mapping
+ *
+ * nilfs_iget_for_shadow() allocates a pair of inodes that holds page
+ * caches for shadow mapping.  The page cache for data pages is set up
+ * in one inode and the one for b-tree node pages is set up in the
+ * other inode, which is attached to the former inode.
+ *
+ * Return Value: On success, a pointer to the inode for data pages is
+ * returned. On errors, one of the following negative error code is returned
+ * in a pointer type.
+ *
+ * %-ENOMEM - Insufficient memory available.
+ */
+struct inode *nilfs_iget_for_shadow(struct inode *inode)
+{
+	struct nilfs_iget_args args = {
+		.ino = inode->i_ino, .root = NULL, .cno = 0, .for_gc = false,
+		.for_btnc = false, .for_shadow = true
+	};
+	struct inode *s_inode;
+	int err;
+
+	s_inode = iget5_locked(inode->i_sb, inode->i_ino, nilfs_iget_test,
+			       nilfs_iget_set, &args);
+	if (unlikely(!s_inode))
+		return ERR_PTR(-ENOMEM);
+	if (!(s_inode->i_state & I_NEW))
+		return inode;
+
+	NILFS_I(s_inode)->i_flags = 0;
+	memset(NILFS_I(s_inode)->i_bmap, 0, sizeof(struct nilfs_bmap));
+	mapping_set_gfp_mask(s_inode->i_mapping, GFP_NOFS);
+
+	err = nilfs_attach_btree_node_cache(s_inode);
+	if (unlikely(err)) {
+		iget_failed(s_inode);
+		return ERR_PTR(err);
+	}
+	unlock_new_inode(s_inode);
+	return s_inode;
+}
+
 void nilfs_write_inode_common(struct inode *inode,
 			      struct nilfs_inode *raw_inode, int has_bmap)
 {
diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index 21acd2d4b4d4..131b5add32ee 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -470,9 +470,18 @@ int nilfs_mdt_init(struct inode *inode, gfp_t gfp_mask, size_t objsz)
 void nilfs_mdt_clear(struct inode *inode)
 {
 	struct nilfs_mdt_info *mdi = NILFS_MDT(inode);
+	struct nilfs_shadow_map *shadow = mdi->mi_shadow;
 
 	if (mdi->mi_palloc_cache)
 		nilfs_palloc_destroy_cache(inode);
+
+	if (shadow) {
+		struct inode *s_inode = shadow->inode;
+
+		shadow->inode = NULL;
+		iput(s_inode);
+		mdi->mi_shadow = NULL;
+	}
 }
 
 /**
@@ -506,12 +515,15 @@ int nilfs_mdt_setup_shadow_map(struct inode *inode,
 			       struct nilfs_shadow_map *shadow)
 {
 	struct nilfs_mdt_info *mi = NILFS_MDT(inode);
+	struct inode *s_inode;
 
 	INIT_LIST_HEAD(&shadow->frozen_buffers);
-	address_space_init_once(&shadow->frozen_data);
-	nilfs_mapping_init(&shadow->frozen_data, inode);
-	address_space_init_once(&shadow->frozen_btnodes);
-	nilfs_mapping_init(&shadow->frozen_btnodes, inode);
+
+	s_inode = nilfs_iget_for_shadow(inode);
+	if (IS_ERR(s_inode))
+		return PTR_ERR(s_inode);
+
+	shadow->inode = s_inode;
 	mi->mi_shadow = shadow;
 	return 0;
 }
@@ -525,13 +537,14 @@ int nilfs_mdt_save_to_shadow_map(struct inode *inode)
 	struct nilfs_mdt_info *mi = NILFS_MDT(inode);
 	struct nilfs_inode_info *ii = NILFS_I(inode);
 	struct nilfs_shadow_map *shadow = mi->mi_shadow;
+	struct inode *s_inode = shadow->inode;
 	int ret;
 
-	ret = nilfs_copy_dirty_pages(&shadow->frozen_data, inode->i_mapping);
+	ret = nilfs_copy_dirty_pages(s_inode->i_mapping, inode->i_mapping);
 	if (ret)
 		goto out;
 
-	ret = nilfs_copy_dirty_pages(&shadow->frozen_btnodes,
+	ret = nilfs_copy_dirty_pages(NILFS_I(s_inode)->i_assoc_inode->i_mapping,
 				     ii->i_assoc_inode->i_mapping);
 	if (ret)
 		goto out;
@@ -548,7 +561,7 @@ int nilfs_mdt_freeze_buffer(struct inode *inode, struct buffer_head *bh)
 	struct page *page;
 	int blkbits = inode->i_blkbits;
 
-	page = grab_cache_page(&shadow->frozen_data, bh->b_page->index);
+	page = grab_cache_page(shadow->inode->i_mapping, bh->b_page->index);
 	if (!page)
 		return -ENOMEM;
 
@@ -580,7 +593,7 @@ nilfs_mdt_get_frozen_buffer(struct inode *inode, struct buffer_head *bh)
 	struct page *page;
 	int n;
 
-	page = find_lock_page(&shadow->frozen_data, bh->b_page->index);
+	page = find_lock_page(shadow->inode->i_mapping, bh->b_page->index);
 	if (page) {
 		if (page_has_buffers(page)) {
 			n = bh_offset(bh) >> inode->i_blkbits;
@@ -621,11 +634,11 @@ void nilfs_mdt_restore_from_shadow_map(struct inode *inode)
 		nilfs_palloc_clear_cache(inode);
 
 	nilfs_clear_dirty_pages(inode->i_mapping, true);
-	nilfs_copy_back_pages(inode->i_mapping, &shadow->frozen_data);
+	nilfs_copy_back_pages(inode->i_mapping, shadow->inode->i_mapping);
 
 	nilfs_clear_dirty_pages(ii->i_assoc_inode->i_mapping, true);
 	nilfs_copy_back_pages(ii->i_assoc_inode->i_mapping,
-			      &shadow->frozen_btnodes);
+			      NILFS_I(shadow->inode)->i_assoc_inode->i_mapping);
 
 	nilfs_bmap_restore(ii->i_bmap, &shadow->bmap_store);
 
@@ -640,10 +653,11 @@ void nilfs_mdt_clear_shadow_map(struct inode *inode)
 {
 	struct nilfs_mdt_info *mi = NILFS_MDT(inode);
 	struct nilfs_shadow_map *shadow = mi->mi_shadow;
+	struct inode *shadow_btnc_inode = NILFS_I(shadow->inode)->i_assoc_inode;
 
 	down_write(&mi->mi_sem);
 	nilfs_release_frozen_buffers(shadow);
-	truncate_inode_pages(&shadow->frozen_data, 0);
-	truncate_inode_pages(&shadow->frozen_btnodes, 0);
+	truncate_inode_pages(shadow->inode->i_mapping, 0);
+	truncate_inode_pages(shadow_btnc_inode->i_mapping, 0);
 	up_write(&mi->mi_sem);
 }
diff --git a/fs/nilfs2/mdt.h b/fs/nilfs2/mdt.h
index e77aea4bb921..9d8ac0d27c16 100644
--- a/fs/nilfs2/mdt.h
+++ b/fs/nilfs2/mdt.h
@@ -18,14 +18,12 @@
 /**
  * struct nilfs_shadow_map - shadow mapping of meta data file
  * @bmap_store: shadow copy of bmap state
- * @frozen_data: shadowed dirty data pages
- * @frozen_btnodes: shadowed dirty b-tree nodes' pages
+ * @inode: holder of page caches used in shadow mapping
  * @frozen_buffers: list of frozen buffers
  */
 struct nilfs_shadow_map {
 	struct nilfs_bmap_store bmap_store;
-	struct address_space frozen_data;
-	struct address_space frozen_btnodes;
+	struct inode *inode;
 	struct list_head frozen_buffers;
 };
 
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index 6c5148de84ff..7dcb77d38759 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -92,6 +92,7 @@ enum {
 	NILFS_I_BMAP,			/* has bmap and btnode_cache */
 	NILFS_I_GCINODE,		/* inode for GC, on memory only */
 	NILFS_I_BTNC,			/* inode for btree node cache */
+	NILFS_I_SHADOW,			/* inode for shadowed page cache */
 };
 
 /*
@@ -263,6 +264,7 @@ extern struct inode *nilfs_iget_for_gc(struct super_block *sb,
 				       unsigned long ino, __u64 cno);
 int nilfs_attach_btree_node_cache(struct inode *inode);
 void nilfs_detach_btree_node_cache(struct inode *inode);
+struct inode *nilfs_iget_for_shadow(struct inode *inode);
 extern void nilfs_update_inode(struct inode *, struct buffer_head *, int);
 extern void nilfs_truncate(struct inode *);
 extern void nilfs_evict_inode(struct inode *);
-- 
2.35.1

[PATCH 5.15 044/132] ALSA: usb-audio: Restore Rane SL-1 quirk

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 5c62383c06837b5719cd5447a5758b791279e653 upstream.

At cleaning up and moving the device rename from the quirk table to
its own table, we removed the entry for Rane SL-1 as we thought it's
only for renaming.  It turned out, however, that the quirk is required
for matching with the device that declares itself as no standard
audio but only as vendor-specific.

Restore the quirk entry for Rane SL-1 to fix the regression.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215887
Fixes: 5436f59bc5bc ("ALSA: usb-audio: Move device rename and profile quirks to an internal table")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220516103112.12950-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/quirks-table.h |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3235,6 +3235,15 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 
+/* Rane SL-1 */
+{
+	USB_DEVICE(0x13e5, 0x0001),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_AUDIO_STANDARD_INTERFACE
+        }
+},
+
 /* disabled due to regression for other devices;
  * see https://bugzilla.kernel.org/show_bug.cgi?id=199905
  */

[PATCH 5.15 045/132] ALSA: wavefront: Proper check of get_user() error

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit a34ae6c0660d3b96b0055f68ef74dc9478852245 upstream.

The antient ISA wavefront driver reads its sample patch data (uploaded
over an ioctl) via __get_user() with no good reason; likely just for
some performance optimizations in the past.  Let's change this to the
standard get_user() and the error check for handling the fault case
properly.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220510103626.16635-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/isa/wavefront/wavefront_synth.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/sound/isa/wavefront/wavefront_synth.c
+++ b/sound/isa/wavefront/wavefront_synth.c
@@ -1094,7 +1094,8 @@ wavefront_send_sample (snd_wavefront_t *
 
 			if (dataptr < data_end) {
 		
-				__get_user (sample_short, dataptr);
+				if (get_user(sample_short, dataptr))
+					return -EFAULT;
 				dataptr += skip;
 		
 				if (data_is_unsigned) { /* GUS ? */

[PATCH 5.15 046/132] ALSA: hda/realtek: Add quirk for TongFang devices with pop noise

[Greg Kroah-Hartman]

From: Werner Sembach <wse@tuxedocomputers.com>

commit 8b3b2392ed68bcd17c7eb84ca615ce1e5f115b99 upstream.

When audio stops playing there is an audible "pop"-noise when using
headphones on the TongFang GMxMRxx, GKxNRxx, GMxZGxx, GMxTGxx and GMxAGxx.

This quirk fixes this mostly.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220512180956.281804-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9076,6 +9076,14 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1c06, 0x2013, "Lemote A1802", ALC269_FIXUP_LEMOTE_A1802),
 	SND_PCI_QUIRK(0x1c06, 0x2015, "Lemote A190X", ALC269_FIXUP_LEMOTE_A190X),
 	SND_PCI_QUIRK(0x1d05, 0x1132, "TongFang PHxTxX1", ALC256_FIXUP_SET_COEF_DEFAULTS),
+	SND_PCI_QUIRK(0x1d05, 0x1096, "TongFang GMxMRxx", ALC269_FIXUP_NO_SHUTUP),
+	SND_PCI_QUIRK(0x1d05, 0x1100, "TongFang GKxNRxx", ALC269_FIXUP_NO_SHUTUP),
+	SND_PCI_QUIRK(0x1d05, 0x1111, "TongFang GMxZGxx", ALC269_FIXUP_NO_SHUTUP),
+	SND_PCI_QUIRK(0x1d05, 0x1119, "TongFang GMxZGxx", ALC269_FIXUP_NO_SHUTUP),
+	SND_PCI_QUIRK(0x1d05, 0x1129, "TongFang GMxZGxx", ALC269_FIXUP_NO_SHUTUP),
+	SND_PCI_QUIRK(0x1d05, 0x1147, "TongFang GMxTGxx", ALC269_FIXUP_NO_SHUTUP),
+	SND_PCI_QUIRK(0x1d05, 0x115c, "TongFang GMxTGxx", ALC269_FIXUP_NO_SHUTUP),
+	SND_PCI_QUIRK(0x1d05, 0x121b, "TongFang GMxAGxx", ALC269_FIXUP_NO_SHUTUP),
 	SND_PCI_QUIRK(0x1d72, 0x1602, "RedmiBook", ALC255_FIXUP_XIAOMI_HEADSET_MIC),
 	SND_PCI_QUIRK(0x1d72, 0x1701, "XiaomiNotebook Pro", ALC298_FIXUP_DELL1_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1d72, 0x1901, "RedmiBook 14", ALC256_FIXUP_ASUS_HEADSET_MIC),

[PATCH 5.15 047/132] perf: Fix sys_perf_event_open() race against self

[Greg Kroah-Hartman]

From: Peter Zijlstra <peterz@infradead.org>

commit 3ac6487e584a1eb54071dbe1212e05b884136704 upstream.

Norbert reported that it's possible to race sys_perf_event_open() such
that the looser ends up in another context from the group leader,
triggering many WARNs.

The move_group case checks for races against itself, but the
!move_group case doesn't, seemingly relying on the previous
group_leader->ctx == ctx check. However, that check is racy due to not
holding any locks at that time.

Therefore, re-check the result after acquiring locks and bailing
if they no longer match.

Additionally, clarify the not_move_group case from the
move_group-vs-move_group race.

Fixes: f63a8daa5812 ("perf: Fix event->ctx locking")
Reported-by: Norbert Slusarek <nslusarek@gmx.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/events/core.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -12283,6 +12283,9 @@ SYSCALL_DEFINE5(perf_event_open,
 		 * Do not allow to attach to a group in a different task
 		 * or CPU context. If we're moving SW events, we'll fix
 		 * this up later, so allow that.
+		 *
+		 * Racy, not holding group_leader->ctx->mutex, see comment with
+		 * perf_event_ctx_lock().
 		 */
 		if (!move_group && group_leader->ctx != ctx)
 			goto err_context;
@@ -12348,6 +12351,7 @@ SYSCALL_DEFINE5(perf_event_open,
 			} else {
 				perf_event_ctx_unlock(group_leader, gctx);
 				move_group = 0;
+				goto not_move_group;
 			}
 		}
 
@@ -12364,7 +12368,17 @@ SYSCALL_DEFINE5(perf_event_open,
 		}
 	} else {
 		mutex_lock(&ctx->mutex);
+
+		/*
+		 * Now that we hold ctx->lock, (re)validate group_leader->ctx == ctx,
+		 * see the group_leader && !move_group test earlier.
+		 */
+		if (group_leader && group_leader->ctx != ctx) {
+			err = -EINVAL;
+			goto err_locked;
+		}
 	}
+not_move_group:
 
 	if (ctx->task == TASK_TOMBSTONE) {
 		err = -ESRCH;

[PATCH 5.15 048/132] selinux: fix bad cleanup on error in hashtab_duplicate()

[Greg Kroah-Hartman]

From: Ondrej Mosnacek <omosnace@redhat.com>

commit 6254bd3db316c9ccb3b05caa8b438be63245466f upstream.

The code attempts to free the 'new' pointer using kmem_cache_free(),
which is wrong because this function isn't responsible of freeing it.
Instead, the function should free new->htable and clear the contents of
*new (to prevent double-free).

Cc: stable@vger.kernel.org
Fixes: c7c556f1e81b ("selinux: refactor changing booleans")
Reported-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/selinux/ss/hashtab.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/security/selinux/ss/hashtab.c
+++ b/security/selinux/ss/hashtab.c
@@ -178,7 +178,8 @@ int hashtab_duplicate(struct hashtab *ne
 			kmem_cache_free(hashtab_node_cachep, cur);
 		}
 	}
-	kmem_cache_free(hashtab_node_cachep, new);
+	kfree(new->htable);
+	memset(new, 0, sizeof(*new));
 	return -ENOMEM;
 }
 

[PATCH 5.15 049/132] Fix double fget() in vhost_net_set_backend()

[Greg Kroah-Hartman]

From: Al Viro <viro@zeniv.linux.org.uk>

commit fb4554c2232e44d595920f4d5c66cf8f7d13f9bc upstream.

Descriptor table is a shared resource; two fget() on the same descriptor
may return different struct file references.  get_tap_ptr_ring() is
called after we'd found (and pinned) the socket we'll be using and it
tries to find the private tun/tap data structures associated with it.
Redoing the lookup by the same file descriptor we'd used to get the
socket is racy - we need to same struct file.

Thanks to Jason for spotting a braino in the original variant of patch -
I'd missed the use of fd == -1 for disabling backend, and in that case
we can end up with sock == NULL and sock != oldsock.

Cc: stable@kernel.org
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vhost/net.c |   15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -1450,13 +1450,9 @@ err:
 	return ERR_PTR(r);
 }
 
-static struct ptr_ring *get_tap_ptr_ring(int fd)
+static struct ptr_ring *get_tap_ptr_ring(struct file *file)
 {
 	struct ptr_ring *ring;
-	struct file *file = fget(fd);
-
-	if (!file)
-		return NULL;
 	ring = tun_get_tx_ring(file);
 	if (!IS_ERR(ring))
 		goto out;
@@ -1465,7 +1461,6 @@ static struct ptr_ring *get_tap_ptr_ring
 		goto out;
 	ring = NULL;
 out:
-	fput(file);
 	return ring;
 }
 
@@ -1552,8 +1547,12 @@ static long vhost_net_set_backend(struct
 		r = vhost_net_enable_vq(n, vq);
 		if (r)
 			goto err_used;
-		if (index == VHOST_NET_VQ_RX)
-			nvq->rx_ring = get_tap_ptr_ring(fd);
+		if (index == VHOST_NET_VQ_RX) {
+			if (sock)
+				nvq->rx_ring = get_tap_ptr_ring(sock->file);
+			else
+				nvq->rx_ring = NULL;
+		}
 
 		oldubufs = nvq->ubufs;
 		nvq->ubufs = ubufs;

[PATCH 5.15 050/132] PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold

[Greg Kroah-Hartman]

From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

commit 92597f97a40bf661bebceb92e26ff87c76d562d4 upstream.

If a Root Port on Elo i2 is put into D3cold and then back into D0, the
downstream device becomes permanently inaccessible, so add a bridge D3 DMI
quirk for that system.

This was exposed by 14858dcc3b35 ("PCI: Use pci_update_current_state() in
pci_enable_device_flags()"), but before that commit the Root Port in
question had never been put into D3cold for real due to a mismatch between
its power state retrieved from the PCI_PM_CTRL register (which was
accessible even though the platform firmware indicated that the port was in
D3cold) and the state of an ACPI power resource involved in its power
management.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215715
Link: https://lore.kernel.org/r/11980172.O9o76ZdvQC@kreacher
Reported-by: Stefan Gottwald <gottwald@igel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org	# v5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/pci.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2888,6 +2888,16 @@ static const struct dmi_system_id bridge
 			DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."),
 			DMI_MATCH(DMI_BOARD_NAME, "X299 DESIGNARE EX-CF"),
 		},
+		/*
+		 * Downstream device is not accessible after putting a root port
+		 * into D3cold and back into D0 on Elo i2.
+		 */
+		.ident = "Elo i2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Elo Touch Solutions"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Elo i2"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "RevB"),
+		},
 	},
 #endif
 	{ }

[PATCH 5.15 051/132] Revert "can: m_can: pci: use custom bit timings for Elkhart Lake"

[Greg Kroah-Hartman]

From: Jarkko Nikula <jarkko.nikula@linux.intel.com>

commit 14ea4a470494528c7e88da5c4116c24eb027059f upstream.

This reverts commit 0e8ffdf3b86dfd44b651f91b12fcae76c25c453b.

Commit 0e8ffdf3b86d ("can: m_can: pci: use custom bit timings for
Elkhart Lake") broke the test case using bitrate switching.

| ip link set can0 up type can bitrate 500000 dbitrate 4000000 fd on
| ip link set can1 up type can bitrate 500000 dbitrate 4000000 fd on
| candump can0 &
| cangen can1 -I 0x800 -L 64 -e -fb \
|     -D 11223344deadbeef55667788feedf00daabbccdd44332211 -n 1 -v -v

Above commit does everything correctly according to the datasheet.
However datasheet wasn't correct.

I got confirmation from hardware engineers that the actual CAN
hardware on Intel Elkhart Lake is based on M_CAN version v3.2.0.
Datasheet was mirroring values from an another specification which was
based on earlier M_CAN version leading to wrong bit timings.

Therefore revert the commit and switch back to common bit timings.

Fixes: ea4c1787685d ("can: m_can: pci: use custom bit timings for Elkhart Lake")
Link: https://lore.kernel.org/all/20220512124144.536850-1-jarkko.nikula@linux.intel.com
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reported-by: Chee Hou Ong <chee.houx.ong@intel.com>
Reported-by: Aman Kumar <aman.kumar@intel.com>
Reported-by: Pallavi Kumari <kumari.pallavi@intel.com>
Cc: <stable@vger.kernel.org> # v5.16+
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/can/m_can/m_can_pci.c |   48 +++-----------------------------------
 1 file changed, 4 insertions(+), 44 deletions(-)

--- a/drivers/net/can/m_can/m_can_pci.c
+++ b/drivers/net/can/m_can/m_can_pci.c
@@ -18,14 +18,9 @@
 
 #define M_CAN_PCI_MMIO_BAR		0
 
+#define M_CAN_CLOCK_FREQ_EHL		200000000
 #define CTL_CSR_INT_CTL_OFFSET		0x508
 
-struct m_can_pci_config {
-	const struct can_bittiming_const *bit_timing;
-	const struct can_bittiming_const *data_timing;
-	unsigned int clock_freq;
-};
-
 struct m_can_pci_priv {
 	struct m_can_classdev cdev;
 
@@ -89,40 +84,9 @@ static struct m_can_ops m_can_pci_ops =
 	.read_fifo = iomap_read_fifo,
 };
 
-static const struct can_bittiming_const m_can_bittiming_const_ehl = {
-	.name = KBUILD_MODNAME,
-	.tseg1_min = 2,		/* Time segment 1 = prop_seg + phase_seg1 */
-	.tseg1_max = 64,
-	.tseg2_min = 1,		/* Time segment 2 = phase_seg2 */
-	.tseg2_max = 128,
-	.sjw_max = 128,
-	.brp_min = 1,
-	.brp_max = 512,
-	.brp_inc = 1,
-};
-
-static const struct can_bittiming_const m_can_data_bittiming_const_ehl = {
-	.name = KBUILD_MODNAME,
-	.tseg1_min = 2,		/* Time segment 1 = prop_seg + phase_seg1 */
-	.tseg1_max = 16,
-	.tseg2_min = 1,		/* Time segment 2 = phase_seg2 */
-	.tseg2_max = 8,
-	.sjw_max = 4,
-	.brp_min = 1,
-	.brp_max = 32,
-	.brp_inc = 1,
-};
-
-static const struct m_can_pci_config m_can_pci_ehl = {
-	.bit_timing = &m_can_bittiming_const_ehl,
-	.data_timing = &m_can_data_bittiming_const_ehl,
-	.clock_freq = 200000000,
-};
-
 static int m_can_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
 {
 	struct device *dev = &pci->dev;
-	const struct m_can_pci_config *cfg;
 	struct m_can_classdev *mcan_class;
 	struct m_can_pci_priv *priv;
 	void __iomem *base;
@@ -150,8 +114,6 @@ static int m_can_pci_probe(struct pci_de
 	if (!mcan_class)
 		return -ENOMEM;
 
-	cfg = (const struct m_can_pci_config *)id->driver_data;
-
 	priv = cdev_to_priv(mcan_class);
 
 	priv->base = base;
@@ -163,9 +125,7 @@ static int m_can_pci_probe(struct pci_de
 	mcan_class->dev = &pci->dev;
 	mcan_class->net->irq = pci_irq_vector(pci, 0);
 	mcan_class->pm_clock_support = 1;
-	mcan_class->bit_timing = cfg->bit_timing;
-	mcan_class->data_timing = cfg->data_timing;
-	mcan_class->can.clock.freq = cfg->clock_freq;
+	mcan_class->can.clock.freq = id->driver_data;
 	mcan_class->ops = &m_can_pci_ops;
 
 	pci_set_drvdata(pci, mcan_class);
@@ -218,8 +178,8 @@ static SIMPLE_DEV_PM_OPS(m_can_pci_pm_op
 			 m_can_pci_suspend, m_can_pci_resume);
 
 static const struct pci_device_id m_can_pci_id_table[] = {
-	{ PCI_VDEVICE(INTEL, 0x4bc1), (kernel_ulong_t)&m_can_pci_ehl, },
-	{ PCI_VDEVICE(INTEL, 0x4bc2), (kernel_ulong_t)&m_can_pci_ehl, },
+	{ PCI_VDEVICE(INTEL, 0x4bc1), M_CAN_CLOCK_FREQ_EHL, },
+	{ PCI_VDEVICE(INTEL, 0x4bc2), M_CAN_CLOCK_FREQ_EHL, },
 	{  }	/* Terminating Entry */
 };
 MODULE_DEVICE_TABLE(pci, m_can_pci_id_table);

[PATCH 5.15 052/132] KVM: x86/mmu: Update number of zapped pages even if page list is stable

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit b28cb0cd2c5e80a8c0feb408a0e4b0dbb6d132c5 upstream.

When zapping obsolete pages, update the running count of zapped pages
regardless of whether or not the list has become unstable due to zapping
a shadow page with its own child shadow pages.  If the VM is backed by
mostly 4kb pages, KVM can zap an absurd number of SPTEs without bumping
the batch count and thus without yielding.  In the worst case scenario,
this can cause a soft lokcup.

 watchdog: BUG: soft lockup - CPU#12 stuck for 22s! [dirty_log_perf_:13020]
   RIP: 0010:workingset_activation+0x19/0x130
   mark_page_accessed+0x266/0x2e0
   kvm_set_pfn_accessed+0x31/0x40
   mmu_spte_clear_track_bits+0x136/0x1c0
   drop_spte+0x1a/0xc0
   mmu_page_zap_pte+0xef/0x120
   __kvm_mmu_prepare_zap_page+0x205/0x5e0
   kvm_mmu_zap_all_fast+0xd7/0x190
   kvm_mmu_invalidate_zap_pages_in_memslot+0xe/0x10
   kvm_page_track_flush_slot+0x5c/0x80
   kvm_arch_flush_shadow_memslot+0xe/0x10
   kvm_set_memslot+0x1a8/0x5d0
   __kvm_set_memory_region+0x337/0x590
   kvm_vm_ioctl+0xb08/0x1040

Fixes: fbb158cb88b6 ("KVM: x86/mmu: Revert "Revert "KVM: MMU: zap pages in batch""")
Reported-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220511145122.3133334-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/mmu/mmu.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -5590,6 +5590,7 @@ static void kvm_zap_obsolete_pages(struc
 {
 	struct kvm_mmu_page *sp, *node;
 	int nr_zapped, batch = 0;
+	bool unstable;
 
 restart:
 	list_for_each_entry_safe_reverse(sp, node,
@@ -5621,11 +5622,12 @@ restart:
 			goto restart;
 		}
 
-		if (__kvm_mmu_prepare_zap_page(kvm, sp,
-				&kvm->arch.zapped_obsolete_pages, &nr_zapped)) {
-			batch += nr_zapped;
+		unstable = __kvm_mmu_prepare_zap_page(kvm, sp,
+				&kvm->arch.zapped_obsolete_pages, &nr_zapped);
+		batch += nr_zapped;
+
+		if (unstable)
 			goto restart;
-		}
 	}
 
 	/*

[PATCH 5.15 053/132] arm64: paravirt: Use RCU read locks to guard stolen_time

[Greg Kroah-Hartman]

From: Prakruthi Deepak Heragu <quic_pheragu@quicinc.com>

commit 19bef63f951e47dd4ba54810e6f7c7ff9344a3ef upstream.

During hotplug, the stolen time data structure is unmapped and memset.
There is a possibility of the timer IRQ being triggered before memset
and stolen time is getting updated as part of this timer IRQ handler. This
causes the below crash in timer handler -

  [ 3457.473139][    C5] Unable to handle kernel paging request at virtual address ffffffc03df05148
  ...
  [ 3458.154398][    C5] Call trace:
  [ 3458.157648][    C5]  para_steal_clock+0x30/0x50
  [ 3458.162319][    C5]  irqtime_account_process_tick+0x30/0x194
  [ 3458.168148][    C5]  account_process_tick+0x3c/0x280
  [ 3458.173274][    C5]  update_process_times+0x5c/0xf4
  [ 3458.178311][    C5]  tick_sched_timer+0x180/0x384
  [ 3458.183164][    C5]  __run_hrtimer+0x160/0x57c
  [ 3458.187744][    C5]  hrtimer_interrupt+0x258/0x684
  [ 3458.192698][    C5]  arch_timer_handler_virt+0x5c/0xa0
  [ 3458.198002][    C5]  handle_percpu_devid_irq+0xdc/0x414
  [ 3458.203385][    C5]  handle_domain_irq+0xa8/0x168
  [ 3458.208241][    C5]  gic_handle_irq.34493+0x54/0x244
  [ 3458.213359][    C5]  call_on_irq_stack+0x40/0x70
  [ 3458.218125][    C5]  do_interrupt_handler+0x60/0x9c
  [ 3458.223156][    C5]  el1_interrupt+0x34/0x64
  [ 3458.227560][    C5]  el1h_64_irq_handler+0x1c/0x2c
  [ 3458.232503][    C5]  el1h_64_irq+0x7c/0x80
  [ 3458.236736][    C5]  free_vmap_area_noflush+0x108/0x39c
  [ 3458.242126][    C5]  remove_vm_area+0xbc/0x118
  [ 3458.246714][    C5]  vm_remove_mappings+0x48/0x2a4
  [ 3458.251656][    C5]  __vunmap+0x154/0x278
  [ 3458.255796][    C5]  stolen_time_cpu_down_prepare+0xc0/0xd8
  [ 3458.261542][    C5]  cpuhp_invoke_callback+0x248/0xc34
  [ 3458.266842][    C5]  cpuhp_thread_fun+0x1c4/0x248
  [ 3458.271696][    C5]  smpboot_thread_fn+0x1b0/0x400
  [ 3458.276638][    C5]  kthread+0x17c/0x1e0
  [ 3458.280691][    C5]  ret_from_fork+0x10/0x20

As a fix, introduce rcu lock to update stolen time structure.

Fixes: 75df529bec91 ("arm64: paravirt: Initialize steal time when cpu is online")
Cc: stable@vger.kernel.org
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Prakruthi Deepak Heragu <quic_pheragu@quicinc.com>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Link: https://lore.kernel.org/r/20220513174654.362169-1-quic_eberman@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/paravirt.c |   29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

--- a/arch/arm64/kernel/paravirt.c
+++ b/arch/arm64/kernel/paravirt.c
@@ -35,7 +35,7 @@ static u64 native_steal_clock(int cpu)
 DEFINE_STATIC_CALL(pv_steal_clock, native_steal_clock);
 
 struct pv_time_stolen_time_region {
-	struct pvclock_vcpu_stolen_time *kaddr;
+	struct pvclock_vcpu_stolen_time __rcu *kaddr;
 };
 
 static DEFINE_PER_CPU(struct pv_time_stolen_time_region, stolen_time_region);
@@ -52,7 +52,9 @@ early_param("no-steal-acc", parse_no_ste
 /* return stolen time in ns by asking the hypervisor */
 static u64 para_steal_clock(int cpu)
 {
+	struct pvclock_vcpu_stolen_time *kaddr = NULL;
 	struct pv_time_stolen_time_region *reg;
+	u64 ret = 0;
 
 	reg = per_cpu_ptr(&stolen_time_region, cpu);
 
@@ -61,28 +63,37 @@ static u64 para_steal_clock(int cpu)
 	 * online notification callback runs. Until the callback
 	 * has run we just return zero.
 	 */
-	if (!reg->kaddr)
+	rcu_read_lock();
+	kaddr = rcu_dereference(reg->kaddr);
+	if (!kaddr) {
+		rcu_read_unlock();
 		return 0;
+	}
 
-	return le64_to_cpu(READ_ONCE(reg->kaddr->stolen_time));
+	ret = le64_to_cpu(READ_ONCE(kaddr->stolen_time));
+	rcu_read_unlock();
+	return ret;
 }
 
 static int stolen_time_cpu_down_prepare(unsigned int cpu)
 {
+	struct pvclock_vcpu_stolen_time *kaddr = NULL;
 	struct pv_time_stolen_time_region *reg;
 
 	reg = this_cpu_ptr(&stolen_time_region);
 	if (!reg->kaddr)
 		return 0;
 
-	memunmap(reg->kaddr);
-	memset(reg, 0, sizeof(*reg));
+	kaddr = rcu_replace_pointer(reg->kaddr, NULL, true);
+	synchronize_rcu();
+	memunmap(kaddr);
 
 	return 0;
 }
 
 static int stolen_time_cpu_online(unsigned int cpu)
 {
+	struct pvclock_vcpu_stolen_time *kaddr = NULL;
 	struct pv_time_stolen_time_region *reg;
 	struct arm_smccc_res res;
 
@@ -93,17 +104,19 @@ static int stolen_time_cpu_online(unsign
 	if (res.a0 == SMCCC_RET_NOT_SUPPORTED)
 		return -EINVAL;
 
-	reg->kaddr = memremap(res.a0,
+	kaddr = memremap(res.a0,
 			      sizeof(struct pvclock_vcpu_stolen_time),
 			      MEMREMAP_WB);
 
+	rcu_assign_pointer(reg->kaddr, kaddr);
+
 	if (!reg->kaddr) {
 		pr_warn("Failed to map stolen time data structure\n");
 		return -ENOMEM;
 	}
 
-	if (le32_to_cpu(reg->kaddr->revision) != 0 ||
-	    le32_to_cpu(reg->kaddr->attributes) != 0) {
+	if (le32_to_cpu(kaddr->revision) != 0 ||
+	    le32_to_cpu(kaddr->attributes) != 0) {
 		pr_warn_once("Unexpected revision or attributes in stolen time data\n");
 		return -ENXIO;
 	}

[PATCH 5.15 054/132] arm64: mte: Ensure the cleared tags are visible before setting the PTE

[Greg Kroah-Hartman]

From: Catalin Marinas <catalin.marinas@arm.com>

commit 1d0cb4c8864addc362bae98e8ffa5500c87e1227 upstream.

As an optimisation, only pages mapped with PROT_MTE in user space have
the MTE tags zeroed. This is done lazily at the set_pte_at() time via
mte_sync_tags(). However, this function is missing a barrier and another
CPU may see the PTE updated before the zeroed tags are visible. Add an
smp_wmb() barrier if the mapping is Normal Tagged.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 34bfeea4a9e9 ("arm64: mte: Clear the tags when a page is mapped in user-space with PROT_MTE")
Cc: <stable@vger.kernel.org> # 5.10.x
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Link: https://lore.kernel.org/r/20220517093532.127095-1-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/mte.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/arm64/kernel/mte.c
+++ b/arch/arm64/kernel/mte.c
@@ -73,6 +73,9 @@ void mte_sync_tags(pte_t old_pte, pte_t
 			mte_sync_page_tags(page, old_pte, check_swap,
 					   pte_is_tagged);
 	}
+
+	/* ensure the tags are visible before the PTE is set */
+	smp_wmb();
 }
 
 int memcmp_pages(struct page *page1, struct page *page2)

[PATCH 5.15 055/132] crypto: qcom-rng - fix infinite loop on requests not multiple of WORD_SZ

[Greg Kroah-Hartman]

From: Ondrej Mosnacek <omosnace@redhat.com>

commit 16287397ec5c08aa58db6acf7dbc55470d78087d upstream.

The commit referenced in the Fixes tag removed the 'break' from the else
branch in qcom_rng_read(), causing an infinite loop whenever 'max' is
not a multiple of WORD_SZ. This can be reproduced e.g. by running:

    kcapi-rng -b 67 >/dev/null

There are many ways to fix this without adding back the 'break', but
they all seem more awkward than simply adding it back, so do just that.

Tested on a machine with Qualcomm Amberwing processor.

Fixes: a680b1832ced ("crypto: qcom-rng - ensure buffer for generate is completely filled")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/qcom-rng.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/crypto/qcom-rng.c
+++ b/drivers/crypto/qcom-rng.c
@@ -65,6 +65,7 @@ static int qcom_rng_read(struct qcom_rng
 		} else {
 			/* copy only remaining bytes */
 			memcpy(data, &val, max - currsize);
+			break;
 		}
 	} while (currsize < max);
 

[PATCH 5.15 056/132] libceph: fix potential use-after-free on linger ping and resends

[Greg Kroah-Hartman]

From: Ilya Dryomov <idryomov@gmail.com>

commit 75dbb685f4e8786c33ddef8279bab0eadfb0731f upstream.

request_reinit() is not only ugly as the comment rightfully suggests,
but also unsafe.  Even though it is called with osdc->lock held for
write in all cases, resetting the OSD request refcount can still race
with handle_reply() and result in use-after-free.  Taking linger ping
as an example:

    handle_timeout thread                     handle_reply thread

                                              down_read(&osdc->lock)
                                              req = lookup_request(...)
                                              ...
                                              finish_request(req)  # unregisters
                                              up_read(&osdc->lock)
                                              __complete_request(req)
                                                linger_ping_cb(req)

      # req->r_kref == 2 because handle_reply still holds its ref

    down_write(&osdc->lock)
    send_linger_ping(lreq)
      req = lreq->ping_req  # same req
      # cancel_linger_request is NOT
      # called - handle_reply already
      # unregistered
      request_reinit(req)
        WARN_ON(req->r_kref != 1)  # fires
        request_init(req)
          kref_init(req->r_kref)

                   # req->r_kref == 1 after kref_init

                                              ceph_osdc_put_request(req)
                                                kref_put(req->r_kref)

            # req->r_kref == 0 after kref_put, req is freed

        <further req initialization/use> !!!

This happens because send_linger_ping() always (re)uses the same OSD
request for watch ping requests, relying on cancel_linger_request() to
unregister it from the OSD client and rip its messages out from the
messenger.  send_linger() does the same for watch/notify registration
and watch reconnect requests.  Unfortunately cancel_request() doesn't
guarantee that after it returns the OSD client would be completely done
with the OSD request -- a ref could still be held and the callback (if
specified) could still be invoked too.

The original motivation for request_reinit() was inability to deal with
allocation failures in send_linger() and send_linger_ping().  Switching
to using osdc->req_mempool (currently only used by CephFS) respects that
and allows us to get rid of request_reinit().

Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/ceph/osd_client.h |    3 
 net/ceph/osd_client.c           |  302 +++++++++++++++-------------------------
 2 files changed, 122 insertions(+), 183 deletions(-)

--- a/include/linux/ceph/osd_client.h
+++ b/include/linux/ceph/osd_client.h
@@ -287,6 +287,9 @@ struct ceph_osd_linger_request {
 	rados_watcherrcb_t errcb;
 	void *data;
 
+	struct ceph_pagelist *request_pl;
+	struct page **notify_id_pages;
+
 	struct page ***preply_pages;
 	size_t *preply_len;
 };
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -537,43 +537,6 @@ static void request_init(struct ceph_osd
 	target_init(&req->r_t);
 }
 
-/*
- * This is ugly, but it allows us to reuse linger registration and ping
- * requests, keeping the structure of the code around send_linger{_ping}()
- * reasonable.  Setting up a min_nr=2 mempool for each linger request
- * and dealing with copying ops (this blasts req only, watch op remains
- * intact) isn't any better.
- */
-static void request_reinit(struct ceph_osd_request *req)
-{
-	struct ceph_osd_client *osdc = req->r_osdc;
-	bool mempool = req->r_mempool;
-	unsigned int num_ops = req->r_num_ops;
-	u64 snapid = req->r_snapid;
-	struct ceph_snap_context *snapc = req->r_snapc;
-	bool linger = req->r_linger;
-	struct ceph_msg *request_msg = req->r_request;
-	struct ceph_msg *reply_msg = req->r_reply;
-
-	dout("%s req %p\n", __func__, req);
-	WARN_ON(kref_read(&req->r_kref) != 1);
-	request_release_checks(req);
-
-	WARN_ON(kref_read(&request_msg->kref) != 1);
-	WARN_ON(kref_read(&reply_msg->kref) != 1);
-	target_destroy(&req->r_t);
-
-	request_init(req);
-	req->r_osdc = osdc;
-	req->r_mempool = mempool;
-	req->r_num_ops = num_ops;
-	req->r_snapid = snapid;
-	req->r_snapc = snapc;
-	req->r_linger = linger;
-	req->r_request = request_msg;
-	req->r_reply = reply_msg;
-}
-
 struct ceph_osd_request *ceph_osdc_alloc_request(struct ceph_osd_client *osdc,
 					       struct ceph_snap_context *snapc,
 					       unsigned int num_ops,
@@ -918,14 +881,30 @@ EXPORT_SYMBOL(osd_req_op_xattr_init);
  * @watch_opcode: CEPH_OSD_WATCH_OP_*
  */
 static void osd_req_op_watch_init(struct ceph_osd_request *req, int which,
-				  u64 cookie, u8 watch_opcode)
+				  u8 watch_opcode, u64 cookie, u32 gen)
 {
 	struct ceph_osd_req_op *op;
 
 	op = osd_req_op_init(req, which, CEPH_OSD_OP_WATCH, 0);
 	op->watch.cookie = cookie;
 	op->watch.op = watch_opcode;
-	op->watch.gen = 0;
+	op->watch.gen = gen;
+}
+
+/*
+ * prot_ver, timeout and notify payload (may be empty) should already be
+ * encoded in @request_pl
+ */
+static void osd_req_op_notify_init(struct ceph_osd_request *req, int which,
+				   u64 cookie, struct ceph_pagelist *request_pl)
+{
+	struct ceph_osd_req_op *op;
+
+	op = osd_req_op_init(req, which, CEPH_OSD_OP_NOTIFY, 0);
+	op->notify.cookie = cookie;
+
+	ceph_osd_data_pagelist_init(&op->notify.request_data, request_pl);
+	op->indata_len = request_pl->length;
 }
 
 /*
@@ -2727,10 +2706,13 @@ static void linger_release(struct kref *
 	WARN_ON(!list_empty(&lreq->pending_lworks));
 	WARN_ON(lreq->osd);
 
-	if (lreq->reg_req)
-		ceph_osdc_put_request(lreq->reg_req);
-	if (lreq->ping_req)
-		ceph_osdc_put_request(lreq->ping_req);
+	if (lreq->request_pl)
+		ceph_pagelist_release(lreq->request_pl);
+	if (lreq->notify_id_pages)
+		ceph_release_page_vector(lreq->notify_id_pages, 1);
+
+	ceph_osdc_put_request(lreq->reg_req);
+	ceph_osdc_put_request(lreq->ping_req);
 	target_destroy(&lreq->t);
 	kfree(lreq);
 }
@@ -2999,6 +2981,12 @@ static void linger_commit_cb(struct ceph
 	struct ceph_osd_linger_request *lreq = req->r_priv;
 
 	mutex_lock(&lreq->lock);
+	if (req != lreq->reg_req) {
+		dout("%s lreq %p linger_id %llu unknown req (%p != %p)\n",
+		     __func__, lreq, lreq->linger_id, req, lreq->reg_req);
+		goto out;
+	}
+
 	dout("%s lreq %p linger_id %llu result %d\n", __func__, lreq,
 	     lreq->linger_id, req->r_result);
 	linger_reg_commit_complete(lreq, req->r_result);
@@ -3022,6 +3010,7 @@ static void linger_commit_cb(struct ceph
 		}
 	}
 
+out:
 	mutex_unlock(&lreq->lock);
 	linger_put(lreq);
 }
@@ -3044,6 +3033,12 @@ static void linger_reconnect_cb(struct c
 	struct ceph_osd_linger_request *lreq = req->r_priv;
 
 	mutex_lock(&lreq->lock);
+	if (req != lreq->reg_req) {
+		dout("%s lreq %p linger_id %llu unknown req (%p != %p)\n",
+		     __func__, lreq, lreq->linger_id, req, lreq->reg_req);
+		goto out;
+	}
+
 	dout("%s lreq %p linger_id %llu result %d last_error %d\n", __func__,
 	     lreq, lreq->linger_id, req->r_result, lreq->last_error);
 	if (req->r_result < 0) {
@@ -3053,46 +3048,64 @@ static void linger_reconnect_cb(struct c
 		}
 	}
 
+out:
 	mutex_unlock(&lreq->lock);
 	linger_put(lreq);
 }
 
 static void send_linger(struct ceph_osd_linger_request *lreq)
 {
-	struct ceph_osd_request *req = lreq->reg_req;
-	struct ceph_osd_req_op *op = &req->r_ops[0];
+	struct ceph_osd_client *osdc = lreq->osdc;
+	struct ceph_osd_request *req;
+	int ret;
 
-	verify_osdc_wrlocked(req->r_osdc);
+	verify_osdc_wrlocked(osdc);
+	mutex_lock(&lreq->lock);
 	dout("%s lreq %p linger_id %llu\n", __func__, lreq, lreq->linger_id);
 
-	if (req->r_osd)
-		cancel_linger_request(req);
+	if (lreq->reg_req) {
+		if (lreq->reg_req->r_osd)
+			cancel_linger_request(lreq->reg_req);
+		ceph_osdc_put_request(lreq->reg_req);
+	}
+
+	req = ceph_osdc_alloc_request(osdc, NULL, 1, true, GFP_NOIO);
+	BUG_ON(!req);
 
-	request_reinit(req);
 	target_copy(&req->r_t, &lreq->t);
 	req->r_mtime = lreq->mtime;
 
-	mutex_lock(&lreq->lock);
 	if (lreq->is_watch && lreq->committed) {
-		WARN_ON(op->op != CEPH_OSD_OP_WATCH ||
-			op->watch.cookie != lreq->linger_id);
-		op->watch.op = CEPH_OSD_WATCH_OP_RECONNECT;
-		op->watch.gen = ++lreq->register_gen;
+		osd_req_op_watch_init(req, 0, CEPH_OSD_WATCH_OP_RECONNECT,
+				      lreq->linger_id, ++lreq->register_gen);
 		dout("lreq %p reconnect register_gen %u\n", lreq,
-		     op->watch.gen);
+		     req->r_ops[0].watch.gen);
 		req->r_callback = linger_reconnect_cb;
 	} else {
-		if (!lreq->is_watch)
+		if (lreq->is_watch) {
+			osd_req_op_watch_init(req, 0, CEPH_OSD_WATCH_OP_WATCH,
+					      lreq->linger_id, 0);
+		} else {
 			lreq->notify_id = 0;
-		else
-			WARN_ON(op->watch.op != CEPH_OSD_WATCH_OP_WATCH);
+
+			refcount_inc(&lreq->request_pl->refcnt);
+			osd_req_op_notify_init(req, 0, lreq->linger_id,
+					       lreq->request_pl);
+			ceph_osd_data_pages_init(
+			    osd_req_op_data(req, 0, notify, response_data),
+			    lreq->notify_id_pages, PAGE_SIZE, 0, false, false);
+		}
 		dout("lreq %p register\n", lreq);
 		req->r_callback = linger_commit_cb;
 	}
-	mutex_unlock(&lreq->lock);
+
+	ret = ceph_osdc_alloc_messages(req, GFP_NOIO);
+	BUG_ON(ret);
 
 	req->r_priv = linger_get(lreq);
 	req->r_linger = true;
+	lreq->reg_req = req;
+	mutex_unlock(&lreq->lock);
 
 	submit_request(req, true);
 }
@@ -3102,6 +3115,12 @@ static void linger_ping_cb(struct ceph_o
 	struct ceph_osd_linger_request *lreq = req->r_priv;
 
 	mutex_lock(&lreq->lock);
+	if (req != lreq->ping_req) {
+		dout("%s lreq %p linger_id %llu unknown req (%p != %p)\n",
+		     __func__, lreq, lreq->linger_id, req, lreq->ping_req);
+		goto out;
+	}
+
 	dout("%s lreq %p linger_id %llu result %d ping_sent %lu last_error %d\n",
 	     __func__, lreq, lreq->linger_id, req->r_result, lreq->ping_sent,
 	     lreq->last_error);
@@ -3117,6 +3136,7 @@ static void linger_ping_cb(struct ceph_o
 		     lreq->register_gen, req->r_ops[0].watch.gen);
 	}
 
+out:
 	mutex_unlock(&lreq->lock);
 	linger_put(lreq);
 }
@@ -3124,8 +3144,8 @@ static void linger_ping_cb(struct ceph_o
 static void send_linger_ping(struct ceph_osd_linger_request *lreq)
 {
 	struct ceph_osd_client *osdc = lreq->osdc;
-	struct ceph_osd_request *req = lreq->ping_req;
-	struct ceph_osd_req_op *op = &req->r_ops[0];
+	struct ceph_osd_request *req;
+	int ret;
 
 	if (ceph_osdmap_flag(osdc, CEPH_OSDMAP_PAUSERD)) {
 		dout("%s PAUSERD\n", __func__);
@@ -3137,19 +3157,26 @@ static void send_linger_ping(struct ceph
 	     __func__, lreq, lreq->linger_id, lreq->ping_sent,
 	     lreq->register_gen);
 
-	if (req->r_osd)
-		cancel_linger_request(req);
+	if (lreq->ping_req) {
+		if (lreq->ping_req->r_osd)
+			cancel_linger_request(lreq->ping_req);
+		ceph_osdc_put_request(lreq->ping_req);
+	}
 
-	request_reinit(req);
-	target_copy(&req->r_t, &lreq->t);
+	req = ceph_osdc_alloc_request(osdc, NULL, 1, true, GFP_NOIO);
+	BUG_ON(!req);
 
-	WARN_ON(op->op != CEPH_OSD_OP_WATCH ||
-		op->watch.cookie != lreq->linger_id ||
-		op->watch.op != CEPH_OSD_WATCH_OP_PING);
-	op->watch.gen = lreq->register_gen;
+	target_copy(&req->r_t, &lreq->t);
+	osd_req_op_watch_init(req, 0, CEPH_OSD_WATCH_OP_PING, lreq->linger_id,
+			      lreq->register_gen);
 	req->r_callback = linger_ping_cb;
+
+	ret = ceph_osdc_alloc_messages(req, GFP_NOIO);
+	BUG_ON(ret);
+
 	req->r_priv = linger_get(lreq);
 	req->r_linger = true;
+	lreq->ping_req = req;
 
 	ceph_osdc_get_request(req);
 	account_request(req);
@@ -3165,12 +3192,6 @@ static void linger_submit(struct ceph_os
 
 	down_write(&osdc->lock);
 	linger_register(lreq);
-	if (lreq->is_watch) {
-		lreq->reg_req->r_ops[0].watch.cookie = lreq->linger_id;
-		lreq->ping_req->r_ops[0].watch.cookie = lreq->linger_id;
-	} else {
-		lreq->reg_req->r_ops[0].notify.cookie = lreq->linger_id;
-	}
 
 	calc_target(osdc, &lreq->t, false);
 	osd = lookup_create_osd(osdc, lreq->t.osd, true);
@@ -3202,9 +3223,9 @@ static void cancel_linger_map_check(stru
  */
 static void __linger_cancel(struct ceph_osd_linger_request *lreq)
 {
-	if (lreq->is_watch && lreq->ping_req->r_osd)
+	if (lreq->ping_req && lreq->ping_req->r_osd)
 		cancel_linger_request(lreq->ping_req);
-	if (lreq->reg_req->r_osd)
+	if (lreq->reg_req && lreq->reg_req->r_osd)
 		cancel_linger_request(lreq->reg_req);
 	cancel_linger_map_check(lreq);
 	unlink_linger(lreq->osd, lreq);
@@ -4653,43 +4674,6 @@ again:
 }
 EXPORT_SYMBOL(ceph_osdc_sync);
 
-static struct ceph_osd_request *
-alloc_linger_request(struct ceph_osd_linger_request *lreq)
-{
-	struct ceph_osd_request *req;
-
-	req = ceph_osdc_alloc_request(lreq->osdc, NULL, 1, false, GFP_NOIO);
-	if (!req)
-		return NULL;
-
-	ceph_oid_copy(&req->r_base_oid, &lreq->t.base_oid);
-	ceph_oloc_copy(&req->r_base_oloc, &lreq->t.base_oloc);
-	return req;
-}
-
-static struct ceph_osd_request *
-alloc_watch_request(struct ceph_osd_linger_request *lreq, u8 watch_opcode)
-{
-	struct ceph_osd_request *req;
-
-	req = alloc_linger_request(lreq);
-	if (!req)
-		return NULL;
-
-	/*
-	 * Pass 0 for cookie because we don't know it yet, it will be
-	 * filled in by linger_submit().
-	 */
-	osd_req_op_watch_init(req, 0, 0, watch_opcode);
-
-	if (ceph_osdc_alloc_messages(req, GFP_NOIO)) {
-		ceph_osdc_put_request(req);
-		return NULL;
-	}
-
-	return req;
-}
-
 /*
  * Returns a handle, caller owns a ref.
  */
@@ -4719,18 +4703,6 @@ ceph_osdc_watch(struct ceph_osd_client *
 	lreq->t.flags = CEPH_OSD_FLAG_WRITE;
 	ktime_get_real_ts64(&lreq->mtime);
 
-	lreq->reg_req = alloc_watch_request(lreq, CEPH_OSD_WATCH_OP_WATCH);
-	if (!lreq->reg_req) {
-		ret = -ENOMEM;
-		goto err_put_lreq;
-	}
-
-	lreq->ping_req = alloc_watch_request(lreq, CEPH_OSD_WATCH_OP_PING);
-	if (!lreq->ping_req) {
-		ret = -ENOMEM;
-		goto err_put_lreq;
-	}
-
 	linger_submit(lreq);
 	ret = linger_reg_commit_wait(lreq);
 	if (ret) {
@@ -4768,8 +4740,8 @@ int ceph_osdc_unwatch(struct ceph_osd_cl
 	ceph_oloc_copy(&req->r_base_oloc, &lreq->t.base_oloc);
 	req->r_flags = CEPH_OSD_FLAG_WRITE;
 	ktime_get_real_ts64(&req->r_mtime);
-	osd_req_op_watch_init(req, 0, lreq->linger_id,
-			      CEPH_OSD_WATCH_OP_UNWATCH);
+	osd_req_op_watch_init(req, 0, CEPH_OSD_WATCH_OP_UNWATCH,
+			      lreq->linger_id, 0);
 
 	ret = ceph_osdc_alloc_messages(req, GFP_NOIO);
 	if (ret)
@@ -4855,35 +4827,6 @@ out_put_req:
 }
 EXPORT_SYMBOL(ceph_osdc_notify_ack);
 
-static int osd_req_op_notify_init(struct ceph_osd_request *req, int which,
-				  u64 cookie, u32 prot_ver, u32 timeout,
-				  void *payload, u32 payload_len)
-{
-	struct ceph_osd_req_op *op;
-	struct ceph_pagelist *pl;
-	int ret;
-
-	op = osd_req_op_init(req, which, CEPH_OSD_OP_NOTIFY, 0);
-	op->notify.cookie = cookie;
-
-	pl = ceph_pagelist_alloc(GFP_NOIO);
-	if (!pl)
-		return -ENOMEM;
-
-	ret = ceph_pagelist_encode_32(pl, 1); /* prot_ver */
-	ret |= ceph_pagelist_encode_32(pl, timeout);
-	ret |= ceph_pagelist_encode_32(pl, payload_len);
-	ret |= ceph_pagelist_append(pl, payload, payload_len);
-	if (ret) {
-		ceph_pagelist_release(pl);
-		return -ENOMEM;
-	}
-
-	ceph_osd_data_pagelist_init(&op->notify.request_data, pl);
-	op->indata_len = pl->length;
-	return 0;
-}
-
 /*
  * @timeout: in seconds
  *
@@ -4902,7 +4845,6 @@ int ceph_osdc_notify(struct ceph_osd_cli
 		     size_t *preply_len)
 {
 	struct ceph_osd_linger_request *lreq;
-	struct page **pages;
 	int ret;
 
 	WARN_ON(!timeout);
@@ -4915,41 +4857,35 @@ int ceph_osdc_notify(struct ceph_osd_cli
 	if (!lreq)
 		return -ENOMEM;
 
-	lreq->preply_pages = preply_pages;
-	lreq->preply_len = preply_len;
-
-	ceph_oid_copy(&lreq->t.base_oid, oid);
-	ceph_oloc_copy(&lreq->t.base_oloc, oloc);
-	lreq->t.flags = CEPH_OSD_FLAG_READ;
-
-	lreq->reg_req = alloc_linger_request(lreq);
-	if (!lreq->reg_req) {
+	lreq->request_pl = ceph_pagelist_alloc(GFP_NOIO);
+	if (!lreq->request_pl) {
 		ret = -ENOMEM;
 		goto out_put_lreq;
 	}
 
-	/*
-	 * Pass 0 for cookie because we don't know it yet, it will be
-	 * filled in by linger_submit().
-	 */
-	ret = osd_req_op_notify_init(lreq->reg_req, 0, 0, 1, timeout,
-				     payload, payload_len);
-	if (ret)
+	ret = ceph_pagelist_encode_32(lreq->request_pl, 1); /* prot_ver */
+	ret |= ceph_pagelist_encode_32(lreq->request_pl, timeout);
+	ret |= ceph_pagelist_encode_32(lreq->request_pl, payload_len);
+	ret |= ceph_pagelist_append(lreq->request_pl, payload, payload_len);
+	if (ret) {
+		ret = -ENOMEM;
 		goto out_put_lreq;
+	}
 
 	/* for notify_id */
-	pages = ceph_alloc_page_vector(1, GFP_NOIO);
-	if (IS_ERR(pages)) {
-		ret = PTR_ERR(pages);
+	lreq->notify_id_pages = ceph_alloc_page_vector(1, GFP_NOIO);
+	if (IS_ERR(lreq->notify_id_pages)) {
+		ret = PTR_ERR(lreq->notify_id_pages);
+		lreq->notify_id_pages = NULL;
 		goto out_put_lreq;
 	}
-	ceph_osd_data_pages_init(osd_req_op_data(lreq->reg_req, 0, notify,
-						 response_data),
-				 pages, PAGE_SIZE, 0, false, true);
 
-	ret = ceph_osdc_alloc_messages(lreq->reg_req, GFP_NOIO);
-	if (ret)
-		goto out_put_lreq;
+	lreq->preply_pages = preply_pages;
+	lreq->preply_len = preply_len;
+
+	ceph_oid_copy(&lreq->t.base_oid, oid);
+	ceph_oloc_copy(&lreq->t.base_oloc, oloc);
+	lreq->t.flags = CEPH_OSD_FLAG_READ;
 
 	linger_submit(lreq);
 	ret = linger_reg_commit_wait(lreq);

[PATCH 5.15 057/132] drm/amd: Dont reset dGPUs if the system is going to s2idle

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

commit 7123d39dc24dcd21ff23d75f46f926b15269b9da upstream.

An A+A configuration on ASUS ROG Strix G513QY proves that the ASIC
reset for handling aborted suspend can't work with s2idle.

This functionality was introduced in commit daf8de0874ab5b ("drm/amdgpu:
always reset the asic in suspend (v2)").  A few other commits have
gone on top of the ASIC reset, but this still doesn't work on the A+A
configuration in s2idle.

Avoid doing the reset on dGPUs specifically when using s2idle.

Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2008
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h      |    2 ++
 drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c |   14 ++++++++++++++
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c  |    2 +-
 3 files changed, 17 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -1411,9 +1411,11 @@ static inline int amdgpu_acpi_smart_shif
 
 #if defined(CONFIG_ACPI) && defined(CONFIG_SUSPEND)
 bool amdgpu_acpi_is_s3_active(struct amdgpu_device *adev);
+bool amdgpu_acpi_should_gpu_reset(struct amdgpu_device *adev);
 bool amdgpu_acpi_is_s0ix_active(struct amdgpu_device *adev);
 #else
 static inline bool amdgpu_acpi_is_s0ix_active(struct amdgpu_device *adev) { return false; }
+static inline bool amdgpu_acpi_should_gpu_reset(struct amdgpu_device *adev) { return false; }
 static inline bool amdgpu_acpi_is_s3_active(struct amdgpu_device *adev) { return false; }
 #endif
 
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c
@@ -1046,6 +1046,20 @@ bool amdgpu_acpi_is_s3_active(struct amd
 }
 
 /**
+ * amdgpu_acpi_should_gpu_reset
+ *
+ * @adev: amdgpu_device_pointer
+ *
+ * returns true if should reset GPU, false if not
+ */
+bool amdgpu_acpi_should_gpu_reset(struct amdgpu_device *adev)
+{
+	if (adev->flags & AMD_IS_APU)
+		return false;
+	return pm_suspend_target_state != PM_SUSPEND_TO_IDLE;
+}
+
+/**
  * amdgpu_acpi_is_s0ix_active
  *
  * @adev: amdgpu_device_pointer
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -2259,7 +2259,7 @@ static int amdgpu_pmops_suspend_noirq(st
 	struct drm_device *drm_dev = dev_get_drvdata(dev);
 	struct amdgpu_device *adev = drm_to_adev(drm_dev);
 
-	if (!adev->in_s0ix)
+	if (amdgpu_acpi_should_gpu_reset(adev))
 		return amdgpu_asic_reset(adev);
 
 	return 0;

[PATCH 5.15 058/132] drm/i915/dmc: Add MMIO range restrictions

[Greg Kroah-Hartman]

From: Anusha Srivatsa <anusha.srivatsa@intel.com>

commit 54395a33718af1c04b5098203335b25382291a16 upstream.

Bspec has added some steps that check forDMC MMIO range before
programming them

v2: Fix for CI
v3: move register defines to .h (Anusha)
- Check MMIO restrictions per pipe
- Add MMIO restricton for v1 dmc header as well (Lucas)
v4: s/_PICK/_PICK_EVEN and use it only for Pipe DMC scenario.
- clean up sanity check logic.(Lucas)
- Add MMIO range for RKL as well.(Anusha)
v5: Use DISPLAY_VER instead of per platform check (Lucas)

BSpec: 49193

Cc: stable@vger.kernel.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511000847.1068302-1-anusha.srivatsa@intel.com
(cherry picked from commit 21c47196aec3a93f913a7515e1e7b30e6c54d6c6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/display/intel_dmc.c |   44 +++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_reg.h          |   16 +++++++++++
 2 files changed, 60 insertions(+)

--- a/drivers/gpu/drm/i915/display/intel_dmc.c
+++ b/drivers/gpu/drm/i915/display/intel_dmc.c
@@ -375,6 +375,44 @@ static void dmc_set_fw_offset(struct int
 	}
 }
 
+static bool dmc_mmio_addr_sanity_check(struct intel_dmc *dmc,
+				       const u32 *mmioaddr, u32 mmio_count,
+				       int header_ver, u8 dmc_id)
+{
+	struct drm_i915_private *i915 = container_of(dmc, typeof(*i915), dmc);
+	u32 start_range, end_range;
+	int i;
+
+	if (dmc_id >= DMC_FW_MAX) {
+		drm_warn(&i915->drm, "Unsupported firmware id %u\n", dmc_id);
+		return false;
+	}
+
+	if (header_ver == 1) {
+		start_range = DMC_MMIO_START_RANGE;
+		end_range = DMC_MMIO_END_RANGE;
+	} else if (dmc_id == DMC_FW_MAIN) {
+		start_range = TGL_MAIN_MMIO_START;
+		end_range = TGL_MAIN_MMIO_END;
+	} else if (DISPLAY_VER(i915) >= 13) {
+		start_range = ADLP_PIPE_MMIO_START;
+		end_range = ADLP_PIPE_MMIO_END;
+	} else if (DISPLAY_VER(i915) >= 12) {
+		start_range = TGL_PIPE_MMIO_START(dmc_id);
+		end_range = TGL_PIPE_MMIO_END(dmc_id);
+	} else {
+		drm_warn(&i915->drm, "Unknown mmio range for sanity check");
+		return false;
+	}
+
+	for (i = 0; i < mmio_count; i++) {
+		if (mmioaddr[i] < start_range || mmioaddr[i] > end_range)
+			return false;
+	}
+
+	return true;
+}
+
 static u32 parse_dmc_fw_header(struct intel_dmc *dmc,
 			       const struct intel_dmc_header_base *dmc_header,
 			       size_t rem_size, u8 dmc_id)
@@ -444,6 +482,12 @@ static u32 parse_dmc_fw_header(struct in
 		return 0;
 	}
 
+	if (!dmc_mmio_addr_sanity_check(dmc, mmioaddr, mmio_count,
+					dmc_header->header_ver, dmc_id)) {
+		drm_err(&i915->drm, "DMC firmware has Wrong MMIO Addresses\n");
+		return 0;
+	}
+
 	for (i = 0; i < mmio_count; i++) {
 		dmc_info->mmioaddr[i] = _MMIO(mmioaddr[i]);
 		dmc_info->mmiodata[i] = mmiodata[i];
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7818,6 +7818,22 @@ enum {
 /* MMIO address range for DMC program (0x80000 - 0x82FFF) */
 #define DMC_MMIO_START_RANGE	0x80000
 #define DMC_MMIO_END_RANGE	0x8FFFF
+#define DMC_V1_MMIO_START_RANGE	0x80000
+#define TGL_MAIN_MMIO_START	0x8F000
+#define TGL_MAIN_MMIO_END	0x8FFFF
+#define _TGL_PIPEA_MMIO_START	0x92000
+#define _TGL_PIPEA_MMIO_END	0x93FFF
+#define _TGL_PIPEB_MMIO_START	0x96000
+#define _TGL_PIPEB_MMIO_END	0x97FFF
+#define ADLP_PIPE_MMIO_START	0x5F000
+#define ADLP_PIPE_MMIO_END	0x5FFFF
+
+#define TGL_PIPE_MMIO_START(dmc_id)	_PICK_EVEN(((dmc_id) - 1), _TGL_PIPEA_MMIO_START,\
+						_TGL_PIPEB_MMIO_START)
+
+#define TGL_PIPE_MMIO_END(dmc_id)	_PICK_EVEN(((dmc_id) - 1), _TGL_PIPEA_MMIO_END,\
+						_TGL_PIPEB_MMIO_END)
+
 #define SKL_DMC_DC3_DC5_COUNT	_MMIO(0x80030)
 #define SKL_DMC_DC5_DC6_COUNT	_MMIO(0x8002C)
 #define BXT_DMC_DC3_DC5_COUNT	_MMIO(0x80038)

[PATCH 5.15 059/132] drm/dp/mst: fix a possible memory leak in fetch_monitor_name()

[Greg Kroah-Hartman]

From: Hangyu Hua <hbh25y@gmail.com>

commit 6e03b13cc7d9427c2c77feed1549191015615202 upstream.

drm_dp_mst_get_edid call kmemdup to create mst_edid. So mst_edid need to be
freed after use.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220516032042.13166-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/drm_dp_mst_topology.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -4834,6 +4834,7 @@ static void fetch_monitor_name(struct dr
 
 	mst_edid = drm_dp_mst_get_edid(port->connector, mgr, port);
 	drm_edid_get_monitor_name(mst_edid, name, namelen);
+	kfree(mst_edid);
 }
 
 /**

[PATCH 5.15 060/132] dma-buf: fix use of DMA_BUF_SET_NAME_{A,B} in userspace

[Greg Kroah-Hartman]

From: Jérôme Pouiller <jerome.pouiller@silabs.com>

commit 7c3e9fcad9c7d8bb5d69a576044fb16b1d2e8a01 upstream.

The typedefs u32 and u64 are not available in userspace. Thus user get
an error he try to use DMA_BUF_SET_NAME_A or DMA_BUF_SET_NAME_B:

    $ gcc -Wall   -c -MMD -c -o ioctls_list.o ioctls_list.c
    In file included from /usr/include/x86_64-linux-gnu/asm/ioctl.h:1,
                     from /usr/include/linux/ioctl.h:5,
                     from /usr/include/asm-generic/ioctls.h:5,
                     from ioctls_list.c:11:
    ioctls_list.c:463:29: error: ‘u32’ undeclared here (not in a function)
      463 |     { "DMA_BUF_SET_NAME_A", DMA_BUF_SET_NAME_A, -1, -1 }, // linux/dma-buf.h
          |                             ^~~~~~~~~~~~~~~~~~
    ioctls_list.c:464:29: error: ‘u64’ undeclared here (not in a function)
      464 |     { "DMA_BUF_SET_NAME_B", DMA_BUF_SET_NAME_B, -1, -1 }, // linux/dma-buf.h
          |                             ^~~~~~~~~~~~~~~~~~

The issue was initially reported here[1].

[1]: https://github.com/jerome-pouiller/ioctl/pull/14

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: a5bff92eaac4 ("dma-buf: Fix SET_NAME ioctl uapi")
CC: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220517072708.245265-1-Jerome.Pouiller@silabs.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/uapi/linux/dma-buf.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/include/uapi/linux/dma-buf.h
+++ b/include/uapi/linux/dma-buf.h
@@ -92,7 +92,7 @@ struct dma_buf_sync {
  * between them in actual uapi, they're just different numbers.
  */
 #define DMA_BUF_SET_NAME	_IOW(DMA_BUF_BASE, 1, const char *)
-#define DMA_BUF_SET_NAME_A	_IOW(DMA_BUF_BASE, 1, u32)
-#define DMA_BUF_SET_NAME_B	_IOW(DMA_BUF_BASE, 1, u64)
+#define DMA_BUF_SET_NAME_A	_IOW(DMA_BUF_BASE, 1, __u32)
+#define DMA_BUF_SET_NAME_B	_IOW(DMA_BUF_BASE, 1, __u64)
 
 #endif

[PATCH 5.15 061/132] dma-buf: ensure unique directory name for dmabuf stats

[Greg Kroah-Hartman]

From: Charan Teja Kalla <quic_charante@quicinc.com>

commit 370704e707a5f2d3c9a1d4ed8bd8cd67507d7bb5 upstream.

The dmabuf file uses get_next_ino()(through dma_buf_getfile() ->
alloc_anon_inode()) to get an inode number and uses the same as a
directory name under /sys/kernel/dmabuf/buffers/<ino>. This directory is
used to collect the dmabuf stats and it is created through
dma_buf_stats_setup(). At current, failure to create this directory
entry can make the dma_buf_export() to fail.

Now, as the get_next_ino() can definitely give a repetitive inode no
causing the directory entry creation to fail with -EEXIST. This is a
problem on the systems where dmabuf stats functionality is enabled on
the production builds can make the dma_buf_export(), though the dmabuf
memory is allocated successfully, to fail just because it couldn't
create stats entry.

This issue we are able to see on the snapdragon system within 13 days
where there already exists a directory with inode no "122602" so
dma_buf_stats_setup() failed with -EEXIST as it is trying to create
the same directory entry.

To make the dentry name as unique, use the dmabuf fs specific inode
which is based on the simple atomic variable increment. There is tmpfs
subsystem too which relies on its own inode generation rather than
relying on the get_next_ino() for the same reason of avoiding the
duplicate inodes[1].

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/patch/?id=e809d5f0b5c912fe981dce738f3283b2010665f0

Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: <stable@vger.kernel.org> # 5.15.x+
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1652441296-1986-1-git-send-email-quic_charante@quicinc.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/dma-buf/dma-buf.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/dma-buf/dma-buf.c
+++ b/drivers/dma-buf/dma-buf.c
@@ -436,6 +436,7 @@ static inline int is_dma_buf_file(struct
 
 static struct file *dma_buf_getfile(struct dma_buf *dmabuf, int flags)
 {
+	static atomic64_t dmabuf_inode = ATOMIC64_INIT(0);
 	struct file *file;
 	struct inode *inode = alloc_anon_inode(dma_buf_mnt->mnt_sb);
 
@@ -445,6 +446,13 @@ static struct file *dma_buf_getfile(stru
 	inode->i_size = dmabuf->size;
 	inode_set_bytes(inode, dmabuf->size);
 
+	/*
+	 * The ->i_ino acquired from get_next_ino() is not unique thus
+	 * not suitable for using it as dentry name by dmabuf stats.
+	 * Override ->i_ino with the unique and dmabuffs specific
+	 * value.
+	 */
+	inode->i_ino = atomic64_add_return(1, &dmabuf_inode);
 	file = alloc_file_pseudo(inode, dma_buf_mnt, "dmabuf",
 				 flags, &dma_buf_fops);
 	if (IS_ERR(file))

[PATCH 5.15 062/132] ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi

[Greg Kroah-Hartman]

From: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>

[ Upstream commit efddaa397cceefb61476e383c26fafd1f8ab6356 ]

FWSPIDQ2 and FWSPIDQ3 are not part of FWSPI18 interface so remove
FWQSPID group in pinctrl dtsi. These pins must be used with the
FWSPI pins that are dedicated for boot SPI interface which provides
same 3.3v logic level.

Fixes: 2f6edb6bcb2f ("ARM: dts: aspeed: Fix AST2600 quad spi group")
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220329173932.2588289-2-quic_jaehyoo@quicinc.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index e4775bbceecc..06d60a8540e9 100644
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -117,11 +117,6 @@ pinctrl_fwspid_default: fwspid_default {
 		groups = "FWSPID";
 	};
 
-	pinctrl_fwqspid_default: fwqspid_default {
-		function = "FWSPID";
-		groups = "FWQSPID";
-	};
-
 	pinctrl_fwspiwp_default: fwspiwp_default {
 		function = "FWSPIWP";
 		groups = "FWSPIWP";
-- 
2.35.1

[PATCH 5.15 063/132] pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl

[Greg Kroah-Hartman]

From: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>

[ Upstream commit 3eef2f48ba0933ba995529f522554ad5c276c39b ]

FWSPIDQ2 and FWSPIDQ3 are not part of FWSPI18 interface so remove
FWQSPID group in pinctrl. These pins must be used with the FWSPI
pins that are dedicated for boot SPI interface which provides
same 3.3v logic level.

Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support")
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220329173932.2588289-3-quic_jaehyoo@quicinc.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index a3fa03bcd9a3..54064714d73f 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -1236,18 +1236,12 @@ FUNC_GROUP_DECL(SALT8, AA12);
 FUNC_GROUP_DECL(WDTRST4, AA12);
 
 #define AE12 196
-SIG_EXPR_LIST_DECL_SEMG(AE12, FWSPIDQ2, FWQSPID, FWSPID,
-			SIG_DESC_SET(SCU438, 4));
 SIG_EXPR_LIST_DECL_SESG(AE12, GPIOY4, GPIOY4);
-PIN_DECL_(AE12, SIG_EXPR_LIST_PTR(AE12, FWSPIDQ2),
-	  SIG_EXPR_LIST_PTR(AE12, GPIOY4));
+PIN_DECL_(AE12, SIG_EXPR_LIST_PTR(AE12, GPIOY4));
 
 #define AF12 197
-SIG_EXPR_LIST_DECL_SEMG(AF12, FWSPIDQ3, FWQSPID, FWSPID,
-			SIG_DESC_SET(SCU438, 5));
 SIG_EXPR_LIST_DECL_SESG(AF12, GPIOY5, GPIOY5);
-PIN_DECL_(AF12, SIG_EXPR_LIST_PTR(AF12, FWSPIDQ3),
-	  SIG_EXPR_LIST_PTR(AF12, GPIOY5));
+PIN_DECL_(AF12, SIG_EXPR_LIST_PTR(AF12, GPIOY5));
 
 #define AC12 198
 SSSF_PIN_DECL(AC12, GPIOY6, FWSPIABR, SIG_DESC_SET(SCU438, 6));
@@ -1520,9 +1514,8 @@ SIG_EXPR_LIST_DECL_SEMG(Y4, EMMCDAT7, EMMCG8, EMMC, SIG_DESC_SET(SCU404, 3));
 PIN_DECL_3(Y4, GPIO18E3, FWSPIDMISO, VBMISO, EMMCDAT7);
 
 GROUP_DECL(FWSPID, Y1, Y2, Y3, Y4);
-GROUP_DECL(FWQSPID, Y1, Y2, Y3, Y4, AE12, AF12);
 GROUP_DECL(EMMCG8, AB4, AA4, AC4, AA5, Y5, AB5, AB6, AC5, Y1, Y2, Y3, Y4);
-FUNC_DECL_2(FWSPID, FWSPID, FWQSPID);
+FUNC_DECL_1(FWSPID, FWSPID);
 FUNC_GROUP_DECL(VB, Y1, Y2, Y3, Y4);
 FUNC_DECL_3(EMMC, EMMCG1, EMMCG4, EMMCG8);
 /*
@@ -1918,7 +1911,6 @@ static const struct aspeed_pin_group aspeed_g6_groups[] = {
 	ASPEED_PINCTRL_GROUP(FSI2),
 	ASPEED_PINCTRL_GROUP(FWSPIABR),
 	ASPEED_PINCTRL_GROUP(FWSPID),
-	ASPEED_PINCTRL_GROUP(FWQSPID),
 	ASPEED_PINCTRL_GROUP(FWSPIWP),
 	ASPEED_PINCTRL_GROUP(GPIT0),
 	ASPEED_PINCTRL_GROUP(GPIT1),
-- 
2.35.1

[PATCH 5.15 064/132] ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group

[Greg Kroah-Hartman]

From: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>

[ Upstream commit 890362d41b244536ab63591f813393f5fdf59ed7 ]

Fix incorrect function mappings in pinctrl_qspi1_default and
pinctrl_qspi2_default since their function should be SPI1 and
SPI2 respectively.

Fixes: f510f04c8c83 ("ARM: dts: aspeed: Add AST2600 pinmux nodes")
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220329173932.2588289-8-quic_jaehyoo@quicinc.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 06d60a8540e9..ac07c240419a 100644
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -648,12 +648,12 @@ pinctrl_pwm9g1_default: pwm9g1_default {
 	};
 
 	pinctrl_qspi1_default: qspi1_default {
-		function = "QSPI1";
+		function = "SPI1";
 		groups = "QSPI1";
 	};
 
 	pinctrl_qspi2_default: qspi2_default {
-		function = "QSPI2";
+		function = "SPI2";
 		groups = "QSPI2";
 	};
 
-- 
2.35.1

[PATCH 5.15 065/132] ARM: dts: aspeed: Add ADC for AST2600 and enable for Rainier and Everest

[Greg Kroah-Hartman]

From: Eddie James <eajames@linux.ibm.com>

[ Upstream commit eaad40466bd715c4b342ac9f7c889f5281714feb ]

Add the ADC nodes to the AST2600 devicetree. Enable ADC1 for Rainier and
Everest systems and add an iio-hwmon node for the 7th channel to report
the battery voltage.

Tested on Rainier:
~# cat /sys/class/hwmon/hwmon11/in1_input
1347

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210916210045.31769-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 15 +++++++++++++++
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 15 +++++++++++++++
 arch/arm/boot/dts/aspeed-g6.dtsi             | 20 ++++++++++++++++++++
 3 files changed, 50 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 2efd70666738..af7ea7cab8cf 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -231,6 +231,21 @@ led-pcieslot-power {
 			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
 };
 
 &gpio0 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 6419c9762c0b..6c9f34396a3a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -246,6 +246,21 @@ fan5-presence {
 			linux,code = <11>;
 		};
 	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
 };
 
 &ehci1 {
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 1b47be1704f8..ee171b3364fa 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -364,6 +364,26 @@ xdma: xdma@1e6e7000 {
 				status = "disabled";
 			};
 
+			adc0: adc@1e6e9000 {
+				compatible = "aspeed,ast2600-adc0";
+				reg = <0x1e6e9000 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			adc1: adc@1e6e9100 {
+				compatible = "aspeed,ast2600-adc1";
+				reg = <0x1e6e9100 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
 			gpio0: gpio@1e780000 {
 				#gpio-cells = <2>;
 				gpio-controller;
-- 
2.35.1

[PATCH 5.15 066/132] ARM: dts: aspeed: Add secure boot controller node

[Greg Kroah-Hartman]

From: Joel Stanley <joel@jms.id.au>

[ Upstream commit fea289467608ffddb2f8d3a740912047974bb183 ]

The ast2600 has a secure boot controller.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
Link: https://lore.kernel.org/r/20211117035106.321454-3-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index ee171b3364fa..8f947ed47fc5 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -384,6 +384,11 @@ adc1: adc@1e6e9100 {
 				status = "disabled";
 			};
 
+			sbc: secure-boot-controller@1e6f2000 {
+				compatible = "aspeed,ast2600-sbc";
+				reg = <0x1e6f2000 0x1000>;
+			};
+
 			gpio0: gpio@1e780000 {
 				#gpio-cells = <2>;
 				gpio-controller;
-- 
2.35.1

[PATCH 5.15 067/132] ARM: dts: aspeed: Add video engine to g6

[Greg Kroah-Hartman]

From: Howard Chiu <howard_chiu@aspeedtech.com>

[ Upstream commit 32e62d1beab70d485980013312e747a25c4e13f7 ]

This node was accidentally removed by commit 645afe73f951 ("ARM: dts:
aspeed: ast2600: Update XDMA engine node").

Fixes: 645afe73f951 ("ARM: dts: aspeed: ast2600: Update XDMA engine node")
Signed-off-by: Howard Chiu <howard_chiu@aspeedtech.com>
Link: https://lore.kernel.org/r/SG2PR06MB2315C57600A0132FEF40F21EE61E9@SG2PR06MB2315.apcprd06.prod.outlook.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 8f947ed47fc5..e5724b1a2e20 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -389,6 +389,16 @@ sbc: secure-boot-controller@1e6f2000 {
 				reg = <0x1e6f2000 0x1000>;
 			};
 
+			video: video@1e700000 {
+				compatible = "aspeed,ast2600-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			gpio0: gpio@1e780000 {
 				#gpio-cells = <2>;
 				gpio-controller;
-- 
2.35.1

[PATCH 5.15 068/132] pinctrl: mediatek: mt8365: fix IES control pins

[Greg Kroah-Hartman]

From: Mattijs Korpershoek <mkorpershoek@baylibre.com>

[ Upstream commit f680058f406863b55ac226d1c157701939c63db4 ]

IES26 (BIT 16 of IES1_CFG_ADDR) controls the following pads:

- PAD_I2S_DATA_IN (GPIO114)
- PAD_I2S_LRCK (GPIO115)
- PAD_I2S_BCK (GPIO116)

The pinctrl table is wrong since it lists pins 114 to 112.

Update the table with the correct values.

Fixes: e94d8b6fb83a ("pinctrl: mediatek: add support for mt8365 SoC")
Reported-by: Youngmin Han <Youngmin.Han@geappliances.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220426125714.298907-1-mkorpershoek@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/mediatek/pinctrl-mt8365.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8365.c b/drivers/pinctrl/mediatek/pinctrl-mt8365.c
index 79b1fee5a1eb..ddee0db72d26 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8365.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8365.c
@@ -259,7 +259,7 @@ static const struct mtk_pin_ies_smt_set mt8365_ies_set[] = {
 	MTK_PIN_IES_SMT_SPEC(104, 104, 0x420, 13),
 	MTK_PIN_IES_SMT_SPEC(105, 109, 0x420, 14),
 	MTK_PIN_IES_SMT_SPEC(110, 113, 0x420, 15),
-	MTK_PIN_IES_SMT_SPEC(114, 112, 0x420, 16),
+	MTK_PIN_IES_SMT_SPEC(114, 116, 0x420, 16),
 	MTK_PIN_IES_SMT_SPEC(117, 119, 0x420, 17),
 	MTK_PIN_IES_SMT_SPEC(120, 122, 0x420, 18),
 	MTK_PIN_IES_SMT_SPEC(123, 125, 0x420, 19),
-- 
2.35.1

[PATCH 5.15 069/132] ALSA: hda - fix unused Realtek function when PM is not enabled

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit c3d9ca93f1e3bd3d1adfc4479a12c82fed424c87 ]

When CONFIG_PM is not enabled, alc_shutup() is not needed,
so move it inside the #ifdef CONFIG_PM guard.
Also drop some contiguous #endif / #ifdef CONFIG_PM for simplicity.

Fixes this build warning:
sound/pci/hda/patch_realtek.c:886:20: warning: unused function 'alc_shutup'

Fixes: 08c189f2c552 ("ALSA: hda - Use generic parser codes for Realtek driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220430193318.29024-1-rdunlap@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 1880e30341a0..040825ea9a08 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -932,6 +932,9 @@ static int alc_init(struct hda_codec *codec)
 	return 0;
 }
 
+#define alc_free	snd_hda_gen_free
+
+#ifdef CONFIG_PM
 static inline void alc_shutup(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -945,9 +948,6 @@ static inline void alc_shutup(struct hda_codec *codec)
 		alc_shutup_pins(codec);
 }
 
-#define alc_free	snd_hda_gen_free
-
-#ifdef CONFIG_PM
 static void alc_power_eapd(struct hda_codec *codec)
 {
 	alc_auto_setup_eapd(codec, false);
@@ -961,9 +961,7 @@ static int alc_suspend(struct hda_codec *codec)
 		spec->power_hook(codec);
 	return 0;
 }
-#endif
 
-#ifdef CONFIG_PM
 static int alc_resume(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-- 
2.35.1

[PATCH 5.15 070/132] net: ipa: record proper RX transaction count

[Greg Kroah-Hartman]

From: Alex Elder <elder@linaro.org>

[ Upstream commit d8290cbe1111105f92f0c8ab455bec8bf98d0630 ]

Each time we are notified that some number of transactions on an RX
channel has completed, we record the number of bytes that have been
transferred since the previous notification.  We also track the
number of transactions completed, but that is not currently being
calculated correctly; we're currently counting the number of such
notifications, but each notification can represent many transaction
completions.  Fix this.

Fixes: 650d1603825d8 ("soc: qcom: ipa: the generic software interface")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ipa/gsi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ipa/gsi.c b/drivers/net/ipa/gsi.c
index a2fcdb1abdb9..a734e5576729 100644
--- a/drivers/net/ipa/gsi.c
+++ b/drivers/net/ipa/gsi.c
@@ -1370,9 +1370,10 @@ static void gsi_evt_ring_rx_update(struct gsi_evt_ring *evt_ring, u32 index)
 	struct gsi_event *event_done;
 	struct gsi_event *event;
 	struct gsi_trans *trans;
+	u32 trans_count = 0;
 	u32 byte_count = 0;
-	u32 old_index;
 	u32 event_avail;
+	u32 old_index;
 
 	trans_info = &channel->trans_info;
 
@@ -1393,6 +1394,7 @@ static void gsi_evt_ring_rx_update(struct gsi_evt_ring *evt_ring, u32 index)
 	do {
 		trans->len = __le16_to_cpu(event->len);
 		byte_count += trans->len;
+		trans_count++;
 
 		/* Move on to the next event and transaction */
 		if (--event_avail)
@@ -1404,7 +1406,7 @@ static void gsi_evt_ring_rx_update(struct gsi_evt_ring *evt_ring, u32 index)
 
 	/* We record RX bytes when they are received */
 	channel->byte_count += byte_count;
-	channel->trans_count++;
+	channel->trans_count += trans_count;
 }
 
 /* Initialize a ring, including allocating DMA memory for its entries */
-- 
2.35.1

[PATCH 5.15 071/132] net: macb: Increment rx bd head after allocating skb and buffer

[Greg Kroah-Hartman]

From: Harini Katakam <harini.katakam@xilinx.com>

[ Upstream commit 9500acc631dbb8b73166e25700e656b11f6007b6 ]

In gem_rx_refill rx_prepared_head is incremented at the beginning of
the while loop preparing the skb and data buffers. If the skb or data
buffer allocation fails, this BD will be unusable BDs until the head
loops back to the same BD (and obviously buffer allocation succeeds).
In the unlikely event that there's a string of allocation failures,
there will be an equal number of unusable BDs and an inconsistent RX
BD chain. Hence increment the head at the end of the while loop to be
clean.

Fixes: 4df95131ea80 ("net/macb: change RX path for GEM")
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220512171900.32593-1-harini.katakam@xilinx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cadence/macb_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 217c1a0f8940..2fd3dd4b8b81 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -1250,7 +1250,6 @@ static void gem_rx_refill(struct macb_queue *queue)
 		/* Make hw descriptor updates visible to CPU */
 		rmb();
 
-		queue->rx_prepared_head++;
 		desc = macb_rx_desc(queue, entry);
 
 		if (!queue->rx_skbuff[entry]) {
@@ -1289,6 +1288,7 @@ static void gem_rx_refill(struct macb_queue *queue)
 			dma_wmb();
 			desc->addr &= ~MACB_BIT(RX_USED);
 		}
+		queue->rx_prepared_head++;
 	}
 
 	/* Make descriptor updates visible to hardware */
-- 
2.35.1

[PATCH 5.15 072/132] xfrm: rework default policy structure

[Greg Kroah-Hartman]

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>

[ Upstream commit b58b1f563ab78955d37e9e43e02790a85c66ac05 ]

This is a follow up of commit f8d858e607b2 ("xfrm: make user policy API
complete"). The goal is to align userland API to the internal structures.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by:  Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/netns/xfrm.h |  6 +----
 include/net/xfrm.h       | 48 +++++++++++++++-------------------------
 net/xfrm/xfrm_policy.c   | 10 ++++++---
 net/xfrm/xfrm_user.c     | 43 +++++++++++++++--------------------
 4 files changed, 44 insertions(+), 63 deletions(-)

diff --git a/include/net/netns/xfrm.h b/include/net/netns/xfrm.h
index 947733a639a6..bd7c3be4af5d 100644
--- a/include/net/netns/xfrm.h
+++ b/include/net/netns/xfrm.h
@@ -66,11 +66,7 @@ struct netns_xfrm {
 	int			sysctl_larval_drop;
 	u32			sysctl_acq_expires;
 
-	u8			policy_default;
-#define XFRM_POL_DEFAULT_IN	1
-#define XFRM_POL_DEFAULT_OUT	2
-#define XFRM_POL_DEFAULT_FWD	4
-#define XFRM_POL_DEFAULT_MASK	7
+	u8			policy_default[XFRM_POLICY_MAX];
 
 #ifdef CONFIG_SYSCTL
 	struct ctl_table_header	*sysctl_hdr;
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 358dfe6fefef..e03f0f882226 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1080,25 +1080,18 @@ xfrm_state_addr_cmp(const struct xfrm_tmpl *tmpl, const struct xfrm_state *x, un
 }
 
 #ifdef CONFIG_XFRM
-static inline bool
-xfrm_default_allow(struct net *net, int dir)
-{
-	u8 def = net->xfrm.policy_default;
-
-	switch (dir) {
-	case XFRM_POLICY_IN:
-		return def & XFRM_POL_DEFAULT_IN ? false : true;
-	case XFRM_POLICY_OUT:
-		return def & XFRM_POL_DEFAULT_OUT ? false : true;
-	case XFRM_POLICY_FWD:
-		return def & XFRM_POL_DEFAULT_FWD ? false : true;
-	}
-	return false;
-}
-
 int __xfrm_policy_check(struct sock *, int dir, struct sk_buff *skb,
 			unsigned short family);
 
+static inline bool __xfrm_check_nopolicy(struct net *net, struct sk_buff *skb,
+					 int dir)
+{
+	if (!net->xfrm.policy_count[dir] && !secpath_exists(skb))
+		return net->xfrm.policy_default[dir] == XFRM_USERPOLICY_ACCEPT;
+
+	return false;
+}
+
 static inline int __xfrm_policy_check2(struct sock *sk, int dir,
 				       struct sk_buff *skb,
 				       unsigned int family, int reverse)
@@ -1109,13 +1102,9 @@ static inline int __xfrm_policy_check2(struct sock *sk, int dir,
 	if (sk && sk->sk_policy[XFRM_POLICY_IN])
 		return __xfrm_policy_check(sk, ndir, skb, family);
 
-	if (xfrm_default_allow(net, dir))
-		return (!net->xfrm.policy_count[dir] && !secpath_exists(skb)) ||
-		       (skb_dst(skb) && (skb_dst(skb)->flags & DST_NOPOLICY)) ||
-		       __xfrm_policy_check(sk, ndir, skb, family);
-	else
-		return (skb_dst(skb) && (skb_dst(skb)->flags & DST_NOPOLICY)) ||
-		       __xfrm_policy_check(sk, ndir, skb, family);
+	return __xfrm_check_nopolicy(net, skb, dir) ||
+	       (skb_dst(skb) && (skb_dst(skb)->flags & DST_NOPOLICY)) ||
+	       __xfrm_policy_check(sk, ndir, skb, family);
 }
 
 static inline int xfrm_policy_check(struct sock *sk, int dir, struct sk_buff *skb, unsigned short family)
@@ -1167,13 +1156,12 @@ static inline int xfrm_route_forward(struct sk_buff *skb, unsigned short family)
 {
 	struct net *net = dev_net(skb->dev);
 
-	if (xfrm_default_allow(net, XFRM_POLICY_OUT))
-		return !net->xfrm.policy_count[XFRM_POLICY_OUT] ||
-			(skb_dst(skb)->flags & DST_NOXFRM) ||
-			__xfrm_route_forward(skb, family);
-	else
-		return (skb_dst(skb)->flags & DST_NOXFRM) ||
-			__xfrm_route_forward(skb, family);
+	if (!net->xfrm.policy_count[XFRM_POLICY_OUT] &&
+	    net->xfrm.policy_default[XFRM_POLICY_OUT] == XFRM_USERPOLICY_ACCEPT)
+		return true;
+
+	return (skb_dst(skb)->flags & DST_NOXFRM) ||
+	       __xfrm_route_forward(skb, family);
 }
 
 static inline int xfrm4_route_forward(struct sk_buff *skb)
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 02099d113a0a..a6271b955e11 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -3160,7 +3160,7 @@ struct dst_entry *xfrm_lookup_with_ifid(struct net *net,
 
 nopol:
 	if (!(dst_orig->dev->flags & IFF_LOOPBACK) &&
-	    !xfrm_default_allow(net, dir)) {
+	    net->xfrm.policy_default[dir] == XFRM_USERPOLICY_BLOCK) {
 		err = -EPERM;
 		goto error;
 	}
@@ -3572,7 +3572,7 @@ int __xfrm_policy_check(struct sock *sk, int dir, struct sk_buff *skb,
 	}
 
 	if (!pol) {
-		if (!xfrm_default_allow(net, dir)) {
+		if (net->xfrm.policy_default[dir] == XFRM_USERPOLICY_BLOCK) {
 			XFRM_INC_STATS(net, LINUX_MIB_XFRMINNOPOLS);
 			return 0;
 		}
@@ -3632,7 +3632,8 @@ int __xfrm_policy_check(struct sock *sk, int dir, struct sk_buff *skb,
 		}
 		xfrm_nr = ti;
 
-		if (!xfrm_default_allow(net, dir) && !xfrm_nr) {
+		if (net->xfrm.policy_default[dir] == XFRM_USERPOLICY_BLOCK &&
+		    !xfrm_nr) {
 			XFRM_INC_STATS(net, LINUX_MIB_XFRMINNOSTATES);
 			goto reject;
 		}
@@ -4121,6 +4122,9 @@ static int __net_init xfrm_net_init(struct net *net)
 	spin_lock_init(&net->xfrm.xfrm_policy_lock);
 	seqcount_spinlock_init(&net->xfrm.xfrm_policy_hash_generation, &net->xfrm.xfrm_policy_lock);
 	mutex_init(&net->xfrm.xfrm_cfg_mutex);
+	net->xfrm.policy_default[XFRM_POLICY_IN] = XFRM_USERPOLICY_ACCEPT;
+	net->xfrm.policy_default[XFRM_POLICY_FWD] = XFRM_USERPOLICY_ACCEPT;
+	net->xfrm.policy_default[XFRM_POLICY_OUT] = XFRM_USERPOLICY_ACCEPT;
 
 	rv = xfrm_statistics_init(net);
 	if (rv < 0)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 2acba159327c..5fba82757ce5 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -1993,12 +1993,9 @@ static int xfrm_notify_userpolicy(struct net *net)
 	}
 
 	up = nlmsg_data(nlh);
-	up->in = net->xfrm.policy_default & XFRM_POL_DEFAULT_IN ?
-			XFRM_USERPOLICY_BLOCK : XFRM_USERPOLICY_ACCEPT;
-	up->fwd = net->xfrm.policy_default & XFRM_POL_DEFAULT_FWD ?
-			XFRM_USERPOLICY_BLOCK : XFRM_USERPOLICY_ACCEPT;
-	up->out = net->xfrm.policy_default & XFRM_POL_DEFAULT_OUT ?
-			XFRM_USERPOLICY_BLOCK : XFRM_USERPOLICY_ACCEPT;
+	up->in = net->xfrm.policy_default[XFRM_POLICY_IN];
+	up->fwd = net->xfrm.policy_default[XFRM_POLICY_FWD];
+	up->out = net->xfrm.policy_default[XFRM_POLICY_OUT];
 
 	nlmsg_end(skb, nlh);
 
@@ -2009,26 +2006,26 @@ static int xfrm_notify_userpolicy(struct net *net)
 	return err;
 }
 
+static bool xfrm_userpolicy_is_valid(__u8 policy)
+{
+	return policy == XFRM_USERPOLICY_BLOCK ||
+	       policy == XFRM_USERPOLICY_ACCEPT;
+}
+
 static int xfrm_set_default(struct sk_buff *skb, struct nlmsghdr *nlh,
 			    struct nlattr **attrs)
 {
 	struct net *net = sock_net(skb->sk);
 	struct xfrm_userpolicy_default *up = nlmsg_data(nlh);
 
-	if (up->in == XFRM_USERPOLICY_BLOCK)
-		net->xfrm.policy_default |= XFRM_POL_DEFAULT_IN;
-	else if (up->in == XFRM_USERPOLICY_ACCEPT)
-		net->xfrm.policy_default &= ~XFRM_POL_DEFAULT_IN;
+	if (xfrm_userpolicy_is_valid(up->in))
+		net->xfrm.policy_default[XFRM_POLICY_IN] = up->in;
 
-	if (up->fwd == XFRM_USERPOLICY_BLOCK)
-		net->xfrm.policy_default |= XFRM_POL_DEFAULT_FWD;
-	else if (up->fwd == XFRM_USERPOLICY_ACCEPT)
-		net->xfrm.policy_default &= ~XFRM_POL_DEFAULT_FWD;
+	if (xfrm_userpolicy_is_valid(up->fwd))
+		net->xfrm.policy_default[XFRM_POLICY_FWD] = up->fwd;
 
-	if (up->out == XFRM_USERPOLICY_BLOCK)
-		net->xfrm.policy_default |= XFRM_POL_DEFAULT_OUT;
-	else if (up->out == XFRM_USERPOLICY_ACCEPT)
-		net->xfrm.policy_default &= ~XFRM_POL_DEFAULT_OUT;
+	if (xfrm_userpolicy_is_valid(up->out))
+		net->xfrm.policy_default[XFRM_POLICY_OUT] = up->out;
 
 	rt_genid_bump_all(net);
 
@@ -2058,13 +2055,9 @@ static int xfrm_get_default(struct sk_buff *skb, struct nlmsghdr *nlh,
 	}
 
 	r_up = nlmsg_data(r_nlh);
-
-	r_up->in = net->xfrm.policy_default & XFRM_POL_DEFAULT_IN ?
-			XFRM_USERPOLICY_BLOCK : XFRM_USERPOLICY_ACCEPT;
-	r_up->fwd = net->xfrm.policy_default & XFRM_POL_DEFAULT_FWD ?
-			XFRM_USERPOLICY_BLOCK : XFRM_USERPOLICY_ACCEPT;
-	r_up->out = net->xfrm.policy_default & XFRM_POL_DEFAULT_OUT ?
-			XFRM_USERPOLICY_BLOCK : XFRM_USERPOLICY_ACCEPT;
+	r_up->in = net->xfrm.policy_default[XFRM_POLICY_IN];
+	r_up->fwd = net->xfrm.policy_default[XFRM_POLICY_FWD];
+	r_up->out = net->xfrm.policy_default[XFRM_POLICY_OUT];
 	nlmsg_end(r_skb, r_nlh);
 
 	return nlmsg_unicast(net->xfrm.nlsk, r_skb, portid);
-- 
2.35.1

[PATCH 5.15 073/132] xfrm: fix "disable_policy" flag use when arriving from different devices

[Greg Kroah-Hartman]

From: Eyal Birger <eyal.birger@gmail.com>

[ Upstream commit e6175a2ed1f18bf2f649625bf725e07adcfa6a28 ]

In IPv4 setting the "disable_policy" flag on a device means no policy
should be enforced for traffic originating from the device. This was
implemented by seting the DST_NOPOLICY flag in the dst based on the
originating device.

However, dsts are cached in nexthops regardless of the originating
devices, in which case, the DST_NOPOLICY flag value may be incorrect.

Consider the following setup:

                     +------------------------------+
                     | ROUTER                       |
  +-------------+    | +-----------------+          |
  | ipsec src   |----|-|ipsec0           |          |
  +-------------+    | |disable_policy=0 |   +----+ |
                     | +-----------------+   |eth1|-|-----
  +-------------+    | +-----------------+   +----+ |
  | noipsec src |----|-|eth0             |          |
  +-------------+    | |disable_policy=1 |          |
                     | +-----------------+          |
                     +------------------------------+

Where ROUTER has a default route towards eth1.

dst entries for traffic arriving from eth0 would have DST_NOPOLICY
and would be cached and therefore can be reused by traffic originating
from ipsec0, skipping policy check.

Fix by setting a IPSKB_NOPOLICY flag in IPCB and observing it instead
of the DST in IN/FWD IPv4 policy checks.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/ip.h   |  1 +
 include/net/xfrm.h | 14 +++++++++++++-
 net/ipv4/route.c   | 23 ++++++++++++++++++-----
 3 files changed, 32 insertions(+), 6 deletions(-)

diff --git a/include/net/ip.h b/include/net/ip.h
index 0106c6590ee7..a77a9e1c6c04 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -55,6 +55,7 @@ struct inet_skb_parm {
 #define IPSKB_DOREDIRECT	BIT(5)
 #define IPSKB_FRAG_PMTU		BIT(6)
 #define IPSKB_L3SLAVE		BIT(7)
+#define IPSKB_NOPOLICY		BIT(8)
 
 	u16			frag_max_size;
 };
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index e03f0f882226..65242172e41c 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1092,6 +1092,18 @@ static inline bool __xfrm_check_nopolicy(struct net *net, struct sk_buff *skb,
 	return false;
 }
 
+static inline bool __xfrm_check_dev_nopolicy(struct sk_buff *skb,
+					     int dir, unsigned short family)
+{
+	if (dir != XFRM_POLICY_OUT && family == AF_INET) {
+		/* same dst may be used for traffic originating from
+		 * devices with different policy settings.
+		 */
+		return IPCB(skb)->flags & IPSKB_NOPOLICY;
+	}
+	return skb_dst(skb) && (skb_dst(skb)->flags & DST_NOPOLICY);
+}
+
 static inline int __xfrm_policy_check2(struct sock *sk, int dir,
 				       struct sk_buff *skb,
 				       unsigned int family, int reverse)
@@ -1103,7 +1115,7 @@ static inline int __xfrm_policy_check2(struct sock *sk, int dir,
 		return __xfrm_policy_check(sk, ndir, skb, family);
 
 	return __xfrm_check_nopolicy(net, skb, dir) ||
-	       (skb_dst(skb) && (skb_dst(skb)->flags & DST_NOPOLICY)) ||
+	       __xfrm_check_dev_nopolicy(skb, dir, family) ||
 	       __xfrm_policy_check(sk, ndir, skb, family);
 }
 
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 6e8020a3bd67..1db2fda22830 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1727,6 +1727,7 @@ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 	struct in_device *in_dev = __in_dev_get_rcu(dev);
 	unsigned int flags = RTCF_MULTICAST;
 	struct rtable *rth;
+	bool no_policy;
 	u32 itag = 0;
 	int err;
 
@@ -1737,8 +1738,12 @@ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 	if (our)
 		flags |= RTCF_LOCAL;
 
+	no_policy = IN_DEV_ORCONF(in_dev, NOPOLICY);
+	if (no_policy)
+		IPCB(skb)->flags |= IPSKB_NOPOLICY;
+
 	rth = rt_dst_alloc(dev_net(dev)->loopback_dev, flags, RTN_MULTICAST,
-			   IN_DEV_ORCONF(in_dev, NOPOLICY), false);
+			   no_policy, false);
 	if (!rth)
 		return -ENOBUFS;
 
@@ -1797,7 +1802,7 @@ static int __mkroute_input(struct sk_buff *skb,
 	struct rtable *rth;
 	int err;
 	struct in_device *out_dev;
-	bool do_cache;
+	bool do_cache, no_policy;
 	u32 itag = 0;
 
 	/* get a working reference to the output device */
@@ -1842,6 +1847,10 @@ static int __mkroute_input(struct sk_buff *skb,
 		}
 	}
 
+	no_policy = IN_DEV_ORCONF(in_dev, NOPOLICY);
+	if (no_policy)
+		IPCB(skb)->flags |= IPSKB_NOPOLICY;
+
 	fnhe = find_exception(nhc, daddr);
 	if (do_cache) {
 		if (fnhe)
@@ -1854,8 +1863,7 @@ static int __mkroute_input(struct sk_buff *skb,
 		}
 	}
 
-	rth = rt_dst_alloc(out_dev->dev, 0, res->type,
-			   IN_DEV_ORCONF(in_dev, NOPOLICY),
+	rth = rt_dst_alloc(out_dev->dev, 0, res->type, no_policy,
 			   IN_DEV_ORCONF(out_dev, NOXFRM));
 	if (!rth) {
 		err = -ENOBUFS;
@@ -2230,6 +2238,7 @@ static int ip_route_input_slow(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 	struct rtable	*rth;
 	struct flowi4	fl4;
 	bool do_cache = true;
+	bool no_policy;
 
 	/* IP on this device is disabled. */
 
@@ -2347,6 +2356,10 @@ out:	return err;
 	RT_CACHE_STAT_INC(in_brd);
 
 local_input:
+	no_policy = IN_DEV_ORCONF(in_dev, NOPOLICY);
+	if (no_policy)
+		IPCB(skb)->flags |= IPSKB_NOPOLICY;
+
 	do_cache &= res->fi && !itag;
 	if (do_cache) {
 		struct fib_nh_common *nhc = FIB_RES_NHC(*res);
@@ -2361,7 +2374,7 @@ out:	return err;
 
 	rth = rt_dst_alloc(ip_rt_get_dev(net, res),
 			   flags | RTCF_LOCAL, res->type,
-			   IN_DEV_ORCONF(in_dev, NOPOLICY), false);
+			   no_policy, false);
 	if (!rth)
 		goto e_nobufs;
 
-- 
2.35.1

[PATCH 5.15 074/132] net/sched: act_pedit: sanitize shift argument before usage

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit 4d42d54a7d6aa6d29221d3fd4f2ae9503e94f011 ]

syzbot was able to trigger an Out-of-Bound on the pedit action:

UBSAN: shift-out-of-bounds in net/sched/act_pedit.c:238:43
shift exponent 1400735974 is too large for 32-bit type 'unsigned int'
CPU: 0 PID: 3606 Comm: syz-executor151 Not tainted 5.18.0-rc5-syzkaller-00165-g810c2f0a3f86 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 ubsan_epilogue+0xb/0x50 lib/ubsan.c:151
 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x187 lib/ubsan.c:322
 tcf_pedit_init.cold+0x1a/0x1f net/sched/act_pedit.c:238
 tcf_action_init_1+0x414/0x690 net/sched/act_api.c:1367
 tcf_action_init+0x530/0x8d0 net/sched/act_api.c:1432
 tcf_action_add+0xf9/0x480 net/sched/act_api.c:1956
 tc_ctl_action+0x346/0x470 net/sched/act_api.c:2015
 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5993
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:725
 ____sys_sendmsg+0x6e2/0x800 net/socket.c:2413
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fe36e9e1b59
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffef796fe88 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe36e9e1b59
RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003
RBP: 00007fe36e9a5d00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe36e9a5d90
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 </TASK>

The 'shift' field is not validated, and any value above 31 will
trigger out-of-bounds. The issue predates the git history, but
syzbot was able to trigger it only after the commit mentioned in
the fixes tag, and this change only applies on top of such commit.

Address the issue bounding the 'shift' value to the maximum allowed
by the relevant operator.

Reported-and-tested-by: syzbot+8ed8fc4c57e9dcf23ca6@syzkaller.appspotmail.com
Fixes: 8b796475fd78 ("net/sched: act_pedit: really ensure the skb is writable")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/act_pedit.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c
index cfadd613644a..1262a84b725f 100644
--- a/net/sched/act_pedit.c
+++ b/net/sched/act_pedit.c
@@ -232,6 +232,10 @@ static int tcf_pedit_init(struct net *net, struct nlattr *nla,
 	for (i = 0; i < p->tcfp_nkeys; ++i) {
 		u32 cur = p->tcfp_keys[i].off;
 
+		/* sanitize the shift value for any later use */
+		p->tcfp_keys[i].shift = min_t(size_t, BITS_PER_TYPE(int) - 1,
+					      p->tcfp_keys[i].shift);
+
 		/* The AT option can read a single byte, we can bound the actual
 		 * value with uchar max.
 		 */
-- 
2.35.1

[PATCH 5.15 075/132] netfilter: flowtable: fix excessive hw offload attempts after failure

[Greg Kroah-Hartman]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 396ef64113a8ba01c46315d67a99db8dde3eef51 ]

If a flow cannot be offloaded, the code currently repeatedly tries again as
quickly as possible, which can significantly increase system load.
Fix this by limiting flow timeout update and hardware offload retry to once
per second.

Fixes: c07531c01d82 ("netfilter: flowtable: Remove redundant hw refresh bit")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_flow_table_core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/nf_flow_table_core.c b/net/netfilter/nf_flow_table_core.c
index b90eca7a2f22..52e7f94d2450 100644
--- a/net/netfilter/nf_flow_table_core.c
+++ b/net/netfilter/nf_flow_table_core.c
@@ -329,8 +329,10 @@ void flow_offload_refresh(struct nf_flowtable *flow_table,
 	u32 timeout;
 
 	timeout = nf_flowtable_time_stamp + flow_offload_get_timeout(flow);
-	if (READ_ONCE(flow->timeout) != timeout)
+	if (timeout - READ_ONCE(flow->timeout) > HZ)
 		WRITE_ONCE(flow->timeout, timeout);
+	else
+		return;
 
 	if (likely(!nf_flowtable_hw_offload(flow_table)))
 		return;
-- 
2.35.1

[PATCH 5.15 076/132] netfilter: nft_flow_offload: skip dst neigh lookup for ppp devices

[Greg Kroah-Hartman]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 45ca3e61999e9a30ca2b7cfbf9da8a9f8d13be31 ]

The dst entry does not contain a valid hardware address, so skip the lookup
in order to avoid running into errors here.
The proper hardware address is filled in from nft_dev_path_info

Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_flow_offload.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/net/netfilter/nft_flow_offload.c b/net/netfilter/nft_flow_offload.c
index 0af34ad41479..dd824193c920 100644
--- a/net/netfilter/nft_flow_offload.c
+++ b/net/netfilter/nft_flow_offload.c
@@ -36,6 +36,15 @@ static void nft_default_forward_path(struct nf_flow_route *route,
 	route->tuple[dir].xmit_type	= nft_xmit_type(dst_cache);
 }
 
+static bool nft_is_valid_ether_device(const struct net_device *dev)
+{
+	if (!dev || (dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
+	    dev->addr_len != ETH_ALEN || !is_valid_ether_addr(dev->dev_addr))
+		return false;
+
+	return true;
+}
+
 static int nft_dev_fill_forward_path(const struct nf_flow_route *route,
 				     const struct dst_entry *dst_cache,
 				     const struct nf_conn *ct,
@@ -47,6 +56,9 @@ static int nft_dev_fill_forward_path(const struct nf_flow_route *route,
 	struct neighbour *n;
 	u8 nud_state;
 
+	if (!nft_is_valid_ether_device(dev))
+		goto out;
+
 	n = dst_neigh_lookup(dst_cache, daddr);
 	if (!n)
 		return -1;
@@ -60,6 +72,7 @@ static int nft_dev_fill_forward_path(const struct nf_flow_route *route,
 	if (!(nud_state & NUD_VALID))
 		return -1;
 
+out:
 	return dev_fill_forward_path(dev, ha, stack);
 }
 
@@ -78,15 +91,6 @@ struct nft_forward_info {
 	enum flow_offload_xmit_type xmit_type;
 };
 
-static bool nft_is_valid_ether_device(const struct net_device *dev)
-{
-	if (!dev || (dev->flags & IFF_LOOPBACK) || dev->type != ARPHRD_ETHER ||
-	    dev->addr_len != ETH_ALEN || !is_valid_ether_addr(dev->dev_addr))
-		return false;
-
-	return true;
-}
-
 static void nft_dev_path_info(const struct net_device_path_stack *stack,
 			      struct nft_forward_info *info,
 			      unsigned char *ha, struct nf_flowtable *flowtable)
-- 
2.35.1

[PATCH 5.15 077/132] net: fix dev_fill_forward_path with pppoe + bridge

[Greg Kroah-Hartman]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit cf2df74e202d81b09f09d84c2d8903e0e87e9274 ]

When calling dev_fill_forward_path on a pppoe device, the provided destination
address is invalid. In order for the bridge fdb lookup to succeed, the pppoe
code needs to update ctx->daddr to the correct value.
Fix this by storing the address inside struct net_device_path_ctx

Fixes: f6efc675c9dd ("net: ppp: resolve forwarding path for bridge pppoe devices")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ppp/pppoe.c   | 1 +
 include/linux/netdevice.h | 2 +-
 net/core/dev.c            | 2 +-
 3 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c
index 3619520340b7..e172743948ed 100644
--- a/drivers/net/ppp/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
@@ -988,6 +988,7 @@ static int pppoe_fill_forward_path(struct net_device_path_ctx *ctx,
 	path->encap.proto = htons(ETH_P_PPP_SES);
 	path->encap.id = be16_to_cpu(po->num);
 	memcpy(path->encap.h_dest, po->pppoe_pa.remote, ETH_ALEN);
+	memcpy(ctx->daddr, po->pppoe_pa.remote, ETH_ALEN);
 	path->dev = ctx->dev;
 	ctx->dev = dev;
 
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 62ff09467776..39f1893ecac0 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -887,7 +887,7 @@ struct net_device_path_stack {
 
 struct net_device_path_ctx {
 	const struct net_device *dev;
-	const u8		*daddr;
+	u8			daddr[ETH_ALEN];
 
 	int			num_vlans;
 	struct {
diff --git a/net/core/dev.c b/net/core/dev.c
index 804aba2228c2..5907212c00f3 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -741,11 +741,11 @@ int dev_fill_forward_path(const struct net_device *dev, const u8 *daddr,
 	const struct net_device *last_dev;
 	struct net_device_path_ctx ctx = {
 		.dev	= dev,
-		.daddr	= daddr,
 	};
 	struct net_device_path *path;
 	int ret = 0;
 
+	memcpy(ctx.daddr, daddr, sizeof(ctx.daddr));
 	stack->num_paths = 0;
 	while (ctx.dev && ctx.dev->netdev_ops->ndo_fill_forward_path) {
 		last_dev = ctx.dev;
-- 
2.35.1

[PATCH 5.15 078/132] netfilter: nft_flow_offload: fix offload with pppoe + vlan

[Greg Kroah-Hartman]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 2456074935003b66c40f78df6adfc722435d43ea ]

When running a combination of PPPoE on top of a VLAN, we need to set
info->outdev to the PPPoE device, otherwise PPPoE encap is skipped
during software offload.

Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nft_flow_offload.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/nft_flow_offload.c b/net/netfilter/nft_flow_offload.c
index dd824193c920..12145a80ef03 100644
--- a/net/netfilter/nft_flow_offload.c
+++ b/net/netfilter/nft_flow_offload.c
@@ -123,7 +123,8 @@ static void nft_dev_path_info(const struct net_device_path_stack *stack,
 				info->indev = NULL;
 				break;
 			}
-			info->outdev = path->dev;
+			if (!info->outdev)
+				info->outdev = path->dev;
 			info->encap[info->num_encaps].id = path->encap.id;
 			info->encap[info->num_encaps].proto = path->encap.proto;
 			info->num_encaps++;
-- 
2.35.1

[PATCH 5.15 079/132] Revert "PCI: aardvark: Rewrite IRQ code to chained IRQ handler"

[Greg Kroah-Hartman]

From: Pali Rohár <pali@kernel.org>

[ Upstream commit a3b69dd0ad6265c29c4b6fb381cd76fb3bebdf8c ]

This reverts commit 1571d67dc190e50c6c56e8f88cdc39f7cc53166e.

This commit broke support for setting interrupt affinity. It looks like
that it is related to the chained IRQ handler. Revert this commit until
issue with setting interrupt affinity is fixed.

Fixes: 1571d67dc190 ("PCI: aardvark: Rewrite IRQ code to chained IRQ handler")
Link: https://lore.kernel.org/r/20220515125815.30157-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-aardvark.c | 48 ++++++++++++---------------
 1 file changed, 22 insertions(+), 26 deletions(-)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index ff45052cf48d..7cc2c54daad0 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -272,7 +272,6 @@ struct advk_pcie {
 		u32 actions;
 	} wins[OB_WIN_COUNT];
 	u8 wins_count;
-	int irq;
 	struct irq_domain *rp_irq_domain;
 	struct irq_domain *irq_domain;
 	struct irq_chip irq_chip;
@@ -1572,26 +1571,21 @@ static void advk_pcie_handle_int(struct advk_pcie *pcie)
 	}
 }
 
-static void advk_pcie_irq_handler(struct irq_desc *desc)
+static irqreturn_t advk_pcie_irq_handler(int irq, void *arg)
 {
-	struct advk_pcie *pcie = irq_desc_get_handler_data(desc);
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	u32 val, mask, status;
+	struct advk_pcie *pcie = arg;
+	u32 status;
 
-	chained_irq_enter(chip, desc);
+	status = advk_readl(pcie, HOST_CTRL_INT_STATUS_REG);
+	if (!(status & PCIE_IRQ_CORE_INT))
+		return IRQ_NONE;
 
-	val = advk_readl(pcie, HOST_CTRL_INT_STATUS_REG);
-	mask = advk_readl(pcie, HOST_CTRL_INT_MASK_REG);
-	status = val & ((~mask) & PCIE_IRQ_ALL_MASK);
+	advk_pcie_handle_int(pcie);
 
-	if (status & PCIE_IRQ_CORE_INT) {
-		advk_pcie_handle_int(pcie);
+	/* Clear interrupt */
+	advk_writel(pcie, PCIE_IRQ_CORE_INT, HOST_CTRL_INT_STATUS_REG);
 
-		/* Clear interrupt */
-		advk_writel(pcie, PCIE_IRQ_CORE_INT, HOST_CTRL_INT_STATUS_REG);
-	}
-
-	chained_irq_exit(chip, desc);
+	return IRQ_HANDLED;
 }
 
 static int advk_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
@@ -1673,7 +1667,7 @@ static int advk_pcie_probe(struct platform_device *pdev)
 	struct advk_pcie *pcie;
 	struct pci_host_bridge *bridge;
 	struct resource_entry *entry;
-	int ret;
+	int ret, irq;
 
 	bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct advk_pcie));
 	if (!bridge)
@@ -1759,9 +1753,17 @@ static int advk_pcie_probe(struct platform_device *pdev)
 	if (IS_ERR(pcie->base))
 		return PTR_ERR(pcie->base);
 
-	pcie->irq = platform_get_irq(pdev, 0);
-	if (pcie->irq < 0)
-		return pcie->irq;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_irq(dev, irq, advk_pcie_irq_handler,
+			       IRQF_SHARED | IRQF_NO_THREAD, "advk-pcie",
+			       pcie);
+	if (ret) {
+		dev_err(dev, "Failed to register interrupt\n");
+		return ret;
+	}
 
 	pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node,
 						       "reset-gpios", 0,
@@ -1818,15 +1820,12 @@ static int advk_pcie_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	irq_set_chained_handler_and_data(pcie->irq, advk_pcie_irq_handler, pcie);
-
 	bridge->sysdata = pcie;
 	bridge->ops = &advk_pcie_ops;
 	bridge->map_irq = advk_pcie_map_irq;
 
 	ret = pci_host_probe(bridge);
 	if (ret < 0) {
-		irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
 		advk_pcie_remove_rp_irq_domain(pcie);
 		advk_pcie_remove_msi_irq_domain(pcie);
 		advk_pcie_remove_irq_domain(pcie);
@@ -1875,9 +1874,6 @@ static int advk_pcie_remove(struct platform_device *pdev)
 	advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_REG);
 	advk_writel(pcie, PCIE_IRQ_ALL_MASK, HOST_CTRL_INT_STATUS_REG);
 
-	/* Remove IRQ handler */
-	irq_set_chained_handler_and_data(pcie->irq, NULL, NULL);
-
 	/* Remove IRQ domains */
 	advk_pcie_remove_rp_irq_domain(pcie);
 	advk_pcie_remove_msi_irq_domain(pcie);
-- 
2.35.1

[PATCH 5.15 080/132] net: systemport: Fix an error handling path in bcm_sysport_probe()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit ef6b1cd11962aec21c58d137006ab122dbc8d6fd ]

if devm_clk_get_optional() fails, we still need to go through the error
handling path.

Add the missing goto.

Fixes: 6328a126896ea ("net: systemport: Manage Wake-on-LAN clock")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/99d70634a81c229885ae9e4ee69b2035749f7edc.1652634040.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 0877b3d7f88c..ae541a9d1eee 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -2585,8 +2585,10 @@ static int bcm_sysport_probe(struct platform_device *pdev)
 		device_set_wakeup_capable(&pdev->dev, 1);
 
 	priv->wol_clk = devm_clk_get_optional(&pdev->dev, "sw_sysportwol");
-	if (IS_ERR(priv->wol_clk))
-		return PTR_ERR(priv->wol_clk);
+	if (IS_ERR(priv->wol_clk)) {
+		ret = PTR_ERR(priv->wol_clk);
+		goto err_deregister_fixed_link;
+	}
 
 	/* Set the needed headroom once and for all */
 	BUILD_BUG_ON(sizeof(struct bcm_tsb) != 8);
-- 
2.35.1

[PATCH 5.15 081/132] net: vmxnet3: fix possible use-after-free bugs in vmxnet3_rq_alloc_rx_buf()

[Greg Kroah-Hartman]

From: Zixuan Fu <r33s3n6@gmail.com>

[ Upstream commit 9e7fef9521e73ca8afd7da9e58c14654b02dfad8 ]

In vmxnet3_rq_alloc_rx_buf(), when dma_map_single() fails, rbi->skb is
freed immediately. Similarly, in another branch, when dma_map_page() fails,
rbi->page is also freed. In the two cases, vmxnet3_rq_alloc_rx_buf()
returns an error to its callers vmxnet3_rq_init() -> vmxnet3_rq_init_all()
-> vmxnet3_activate_dev(). Then vmxnet3_activate_dev() calls
vmxnet3_rq_cleanup_all() in error handling code, and rbi->skb or rbi->page
are freed again in vmxnet3_rq_cleanup_all(), causing use-after-free bugs.

To fix these possible bugs, rbi->skb and rbi->page should be cleared after
they are freed.

The error log in our fault-injection testing is shown as follows:

[   14.319016] BUG: KASAN: use-after-free in consume_skb+0x2f/0x150
...
[   14.321586] Call Trace:
...
[   14.325357]  consume_skb+0x2f/0x150
[   14.325671]  vmxnet3_rq_cleanup_all+0x33a/0x4e0 [vmxnet3]
[   14.326150]  vmxnet3_activate_dev+0xb9d/0x2ca0 [vmxnet3]
[   14.326616]  vmxnet3_open+0x387/0x470 [vmxnet3]
...
[   14.361675] Allocated by task 351:
...
[   14.362688]  __netdev_alloc_skb+0x1b3/0x6f0
[   14.362960]  vmxnet3_rq_alloc_rx_buf+0x1b0/0x8d0 [vmxnet3]
[   14.363317]  vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3]
[   14.363661]  vmxnet3_open+0x387/0x470 [vmxnet3]
...
[   14.367309]
[   14.367412] Freed by task 351:
...
[   14.368932]  __dev_kfree_skb_any+0xd2/0xe0
[   14.369193]  vmxnet3_rq_alloc_rx_buf+0x71e/0x8d0 [vmxnet3]
[   14.369544]  vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3]
[   14.369883]  vmxnet3_open+0x387/0x470 [vmxnet3]
[   14.370174]  __dev_open+0x28a/0x420
[   14.370399]  __dev_change_flags+0x192/0x590
[   14.370667]  dev_change_flags+0x7a/0x180
[   14.370919]  do_setlink+0xb28/0x3570
[   14.371150]  rtnl_newlink+0x1160/0x1740
[   14.371399]  rtnetlink_rcv_msg+0x5bf/0xa50
[   14.371661]  netlink_rcv_skb+0x1cd/0x3e0
[   14.371913]  netlink_unicast+0x5dc/0x840
[   14.372169]  netlink_sendmsg+0x856/0xc40
[   14.372420]  ____sys_sendmsg+0x8a7/0x8d0
[   14.372673]  __sys_sendmsg+0x1c2/0x270
[   14.372914]  do_syscall_64+0x41/0x90
[   14.373145]  entry_SYSCALL_64_after_hwframe+0x44/0xae
...

Fixes: 5738a09d58d5a ("vmxnet3: fix checks for dma mapping errors")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Zixuan Fu <r33s3n6@gmail.com>
Link: https://lore.kernel.org/r/20220514050656.2636588-1-r33s3n6@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vmxnet3/vmxnet3_drv.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 5b0215b7c176..8ab86bbdbf5e 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -589,6 +589,7 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx,
 				if (dma_mapping_error(&adapter->pdev->dev,
 						      rbi->dma_addr)) {
 					dev_kfree_skb_any(rbi->skb);
+					rbi->skb = NULL;
 					rq->stats.rx_buf_alloc_failure++;
 					break;
 				}
@@ -613,6 +614,7 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx,
 				if (dma_mapping_error(&adapter->pdev->dev,
 						      rbi->dma_addr)) {
 					put_page(rbi->page);
+					rbi->page = NULL;
 					rq->stats.rx_buf_alloc_failure++;
 					break;
 				}
-- 
2.35.1

[PATCH 5.15 082/132] net: vmxnet3: fix possible NULL pointer dereference in vmxnet3_rq_cleanup()

[Greg Kroah-Hartman]

From: Zixuan Fu <r33s3n6@gmail.com>

[ Upstream commit edf410cb74dc612fd47ef5be319c5a0bcd6e6ccd ]

In vmxnet3_rq_create(), when dma_alloc_coherent() fails,
vmxnet3_rq_destroy() is called. It sets rq->rx_ring[i].base to NULL. Then
vmxnet3_rq_create() returns an error to its callers mxnet3_rq_create_all()
-> vmxnet3_change_mtu(). Then vmxnet3_change_mtu() calls
vmxnet3_force_close() -> dev_close() in error handling code. And the driver
calls vmxnet3_close() -> vmxnet3_quiesce_dev() -> vmxnet3_rq_cleanup_all()
-> vmxnet3_rq_cleanup(). In vmxnet3_rq_cleanup(),
rq->rx_ring[ring_idx].base is accessed, but this variable is NULL, causing
a NULL pointer dereference.

To fix this possible bug, an if statement is added to check whether
rq->rx_ring[0].base is NULL in vmxnet3_rq_cleanup() and exit early if so.

The error log in our fault-injection testing is shown as follows:

[   65.220135] BUG: kernel NULL pointer dereference, address: 0000000000000008
...
[   65.222633] RIP: 0010:vmxnet3_rq_cleanup_all+0x396/0x4e0 [vmxnet3]
...
[   65.227977] Call Trace:
...
[   65.228262]  vmxnet3_quiesce_dev+0x80f/0x8a0 [vmxnet3]
[   65.228580]  vmxnet3_close+0x2c4/0x3f0 [vmxnet3]
[   65.228866]  __dev_close_many+0x288/0x350
[   65.229607]  dev_close_many+0xa4/0x480
[   65.231124]  dev_close+0x138/0x230
[   65.231933]  vmxnet3_force_close+0x1f0/0x240 [vmxnet3]
[   65.232248]  vmxnet3_change_mtu+0x75d/0x920 [vmxnet3]
...

Fixes: d1a890fa37f27 ("net: VMware virtual Ethernet NIC driver: vmxnet3")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Zixuan Fu <r33s3n6@gmail.com>
Link: https://lore.kernel.org/r/20220514050711.2636709-1-r33s3n6@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vmxnet3/vmxnet3_drv.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 8ab86bbdbf5e..bc3192cf48e3 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -1668,6 +1668,10 @@ vmxnet3_rq_cleanup(struct vmxnet3_rx_queue *rq,
 	u32 i, ring_idx;
 	struct Vmxnet3_RxDesc *rxd;
 
+	/* ring has already been cleaned up */
+	if (!rq->rx_ring[0].base)
+		return;
+
 	for (ring_idx = 0; ring_idx < 2; ring_idx++) {
 		for (i = 0; i < rq->rx_ring[ring_idx].size; i++) {
 #ifdef __BIG_ENDIAN_BITFIELD
-- 
2.35.1

[PATCH 5.15 083/132] ice: fix crash when writing timestamp on RX rings

[Greg Kroah-Hartman]

From: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>

[ Upstream commit 4503cc7fdf9a84cd631b0cb8ecb3c9b1bdbf3594 ]

Do not allow to write timestamps on RX rings if PF is being configured.
When PF is being configured RX rings can be freed or rebuilt. If at the
same time timestamps are updated, the kernel will crash by dereferencing
null RX ring pointer.

PID: 1449   TASK: ff187d28ed658040  CPU: 34  COMMAND: "ice-ptp-0000:51"
 #0 [ff1966a94a713bb0] machine_kexec at ffffffff9d05a0be
 #1 [ff1966a94a713c08] __crash_kexec at ffffffff9d192e9d
 #2 [ff1966a94a713cd0] crash_kexec at ffffffff9d1941bd
 #3 [ff1966a94a713ce8] oops_end at ffffffff9d01bd54
 #4 [ff1966a94a713d08] no_context at ffffffff9d06bda4
 #5 [ff1966a94a713d60] __bad_area_nosemaphore at ffffffff9d06c10c
 #6 [ff1966a94a713da8] do_page_fault at ffffffff9d06cae4
 #7 [ff1966a94a713de0] page_fault at ffffffff9da0107e
    [exception RIP: ice_ptp_update_cached_phctime+91]
    RIP: ffffffffc076db8b  RSP: ff1966a94a713e98  RFLAGS: 00010246
    RAX: 16e3db9c6b7ccae4  RBX: ff187d269dd3c180  RCX: ff187d269cd4d018
    RDX: 0000000000000000  RSI: 0000000000000000  RDI: 0000000000000000
    RBP: ff187d269cfcc644   R8: ff187d339b9641b0   R9: 0000000000000000
    R10: 0000000000000002  R11: 0000000000000000  R12: ff187d269cfcc648
    R13: ffffffff9f128784  R14: ffffffff9d101b70  R15: ff187d269cfcc640
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #8 [ff1966a94a713ea0] ice_ptp_periodic_work at ffffffffc076dbef [ice]
 #9 [ff1966a94a713ee0] kthread_worker_fn at ffffffff9d101c1b
 #10 [ff1966a94a713f10] kthread at ffffffff9d101b4d
 #11 [ff1966a94a713f50] ret_from_fork at ffffffff9da0023f

Fixes: 77a781155a65 ("ice: enable receive hardware timestamping")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Dave Cain <dcain@redhat.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_ptp.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c
index ef26ff351b57..9b50e9e6042a 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.c
@@ -254,12 +254,19 @@ ice_ptp_read_src_clk_reg(struct ice_pf *pf, struct ptp_system_timestamp *sts)
  * This function must be called periodically to ensure that the cached value
  * is never more than 2 seconds old. It must also be called whenever the PHC
  * time has been changed.
+ *
+ * Return:
+ * * 0 - OK, successfully updated
+ * * -EAGAIN - PF was busy, need to reschedule the update
  */
-static void ice_ptp_update_cached_phctime(struct ice_pf *pf)
+static int ice_ptp_update_cached_phctime(struct ice_pf *pf)
 {
 	u64 systime;
 	int i;
 
+	if (test_and_set_bit(ICE_CFG_BUSY, pf->state))
+		return -EAGAIN;
+
 	/* Read the current PHC time */
 	systime = ice_ptp_read_src_clk_reg(pf, NULL);
 
@@ -282,6 +289,9 @@ static void ice_ptp_update_cached_phctime(struct ice_pf *pf)
 			WRITE_ONCE(vsi->rx_rings[j]->cached_phctime, systime);
 		}
 	}
+	clear_bit(ICE_CFG_BUSY, pf->state);
+
+	return 0;
 }
 
 /**
@@ -1418,17 +1428,18 @@ static void ice_ptp_periodic_work(struct kthread_work *work)
 {
 	struct ice_ptp *ptp = container_of(work, struct ice_ptp, work.work);
 	struct ice_pf *pf = container_of(ptp, struct ice_pf, ptp);
+	int err;
 
 	if (!test_bit(ICE_FLAG_PTP, pf->flags))
 		return;
 
-	ice_ptp_update_cached_phctime(pf);
+	err = ice_ptp_update_cached_phctime(pf);
 
 	ice_ptp_tx_tstamp_cleanup(&pf->hw, &pf->ptp.port.tx);
 
-	/* Run twice a second */
+	/* Run twice a second or reschedule if phc update failed */
 	kthread_queue_delayed_work(ptp->kworker, &ptp->work,
-				   msecs_to_jiffies(500));
+				   msecs_to_jiffies(err ? 10 : 500));
 }
 
 /**
-- 
2.35.1

[PATCH 5.15 084/132] ice: fix possible under reporting of ethtool Tx and Rx statistics

[Greg Kroah-Hartman]

From: Paul Greenwalt <paul.greenwalt@intel.com>

[ Upstream commit 31b6298fd8e29effe9ed6b77351ac5969be56ce0 ]

The hardware statistics counters are not cleared during resets so the
drivers first access is to initialize the baseline and then subsequent
reads are for reporting the counters. The statistics counters are read
during the watchdog subtask when the interface is up. If the baseline
is not initialized before the interface is up, then there can be a brief
window in which some traffic can be transmitted/received before the
initial baseline reading takes place.

Directly initialize ethtool statistics in driver open so the baseline will
be initialized when the interface is up, and any dropped packets
incremented before the interface is up won't be reported.

Fixes: 28dc1b86f8ea9 ("ice: ignore dropped packets during init")
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 27b5c75ce386..188abf36a5b2 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -5656,9 +5656,10 @@ static int ice_up_complete(struct ice_vsi *vsi)
 		netif_carrier_on(vsi->netdev);
 	}
 
-	/* clear this now, and the first stats read will be used as baseline */
-	vsi->stat_offsets_loaded = false;
-
+	/* Perform an initial read of the statistics registers now to
+	 * set the baseline so counters are ready when interface is up
+	 */
+	ice_update_eth_stats(vsi);
 	ice_service_task_schedule(pf);
 
 	return 0;
-- 
2.35.1

[PATCH 5.15 085/132] ice: move ice_container_type onto ice_ring_container

[Greg Kroah-Hartman]

From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

[ Upstream commit dc23715cf30a9acb808f5b08962877c390d3e6ea ]

Currently ice_container_type is scoped only for ice_ethtool.c. Next
commit that will split the ice_ring struct onto Rx/Tx specific ring
structs is going to also modify the type of linked list of rings that is
within ice_ring_container. Therefore, the functions that are taking the
ice_ring_container as an input argument will need to be aware of a ring
type that will be looked up.

Embed ice_container_type within ice_ring_container and initialize it
properly when allocating the q_vectors.

Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_base.c    |  2 ++
 drivers/net/ethernet/intel/ice/ice_ethtool.c | 38 ++++++++------------
 drivers/net/ethernet/intel/ice/ice_txrx.h    |  6 ++++
 3 files changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_base.c b/drivers/net/ethernet/intel/ice/ice_base.c
index f74610442bda..533a953f15ac 100644
--- a/drivers/net/ethernet/intel/ice/ice_base.c
+++ b/drivers/net/ethernet/intel/ice/ice_base.c
@@ -115,6 +115,8 @@ static int ice_vsi_alloc_q_vector(struct ice_vsi *vsi, u16 v_idx)
 	q_vector->rx.itr_setting = ICE_DFLT_RX_ITR;
 	q_vector->tx.itr_mode = ITR_DYNAMIC;
 	q_vector->rx.itr_mode = ITR_DYNAMIC;
+	q_vector->tx.type = ICE_TX_CONTAINER;
+	q_vector->rx.type = ICE_RX_CONTAINER;
 
 	if (vsi->type == ICE_VSI_VF)
 		goto out;
diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 38c2d9a5574a..19f115402969 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -3466,15 +3466,9 @@ static int ice_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	return 0;
 }
 
-enum ice_container_type {
-	ICE_RX_CONTAINER,
-	ICE_TX_CONTAINER,
-};
-
 /**
  * ice_get_rc_coalesce - get ITR values for specific ring container
  * @ec: ethtool structure to fill with driver's coalesce settings
- * @c_type: container type, Rx or Tx
  * @rc: ring container that the ITR values will come from
  *
  * Query the device for ice_ring_container specific ITR values. This is
@@ -3484,13 +3478,12 @@ enum ice_container_type {
  * Returns 0 on success, negative otherwise.
  */
 static int
-ice_get_rc_coalesce(struct ethtool_coalesce *ec, enum ice_container_type c_type,
-		    struct ice_ring_container *rc)
+ice_get_rc_coalesce(struct ethtool_coalesce *ec, struct ice_ring_container *rc)
 {
 	if (!rc->ring)
 		return -EINVAL;
 
-	switch (c_type) {
+	switch (rc->type) {
 	case ICE_RX_CONTAINER:
 		ec->use_adaptive_rx_coalesce = ITR_IS_DYNAMIC(rc);
 		ec->rx_coalesce_usecs = rc->itr_setting;
@@ -3501,7 +3494,7 @@ ice_get_rc_coalesce(struct ethtool_coalesce *ec, enum ice_container_type c_type,
 		ec->tx_coalesce_usecs = rc->itr_setting;
 		break;
 	default:
-		dev_dbg(ice_pf_to_dev(rc->ring->vsi->back), "Invalid c_type %d\n", c_type);
+		dev_dbg(ice_pf_to_dev(rc->ring->vsi->back), "Invalid c_type %d\n", rc->type);
 		return -EINVAL;
 	}
 
@@ -3522,18 +3515,18 @@ static int
 ice_get_q_coalesce(struct ice_vsi *vsi, struct ethtool_coalesce *ec, int q_num)
 {
 	if (q_num < vsi->num_rxq && q_num < vsi->num_txq) {
-		if (ice_get_rc_coalesce(ec, ICE_RX_CONTAINER,
+		if (ice_get_rc_coalesce(ec,
 					&vsi->rx_rings[q_num]->q_vector->rx))
 			return -EINVAL;
-		if (ice_get_rc_coalesce(ec, ICE_TX_CONTAINER,
+		if (ice_get_rc_coalesce(ec,
 					&vsi->tx_rings[q_num]->q_vector->tx))
 			return -EINVAL;
 	} else if (q_num < vsi->num_rxq) {
-		if (ice_get_rc_coalesce(ec, ICE_RX_CONTAINER,
+		if (ice_get_rc_coalesce(ec,
 					&vsi->rx_rings[q_num]->q_vector->rx))
 			return -EINVAL;
 	} else if (q_num < vsi->num_txq) {
-		if (ice_get_rc_coalesce(ec, ICE_TX_CONTAINER,
+		if (ice_get_rc_coalesce(ec,
 					&vsi->tx_rings[q_num]->q_vector->tx))
 			return -EINVAL;
 	} else {
@@ -3585,7 +3578,6 @@ ice_get_per_q_coalesce(struct net_device *netdev, u32 q_num,
 
 /**
  * ice_set_rc_coalesce - set ITR values for specific ring container
- * @c_type: container type, Rx or Tx
  * @ec: ethtool structure from user to update ITR settings
  * @rc: ring container that the ITR values will come from
  * @vsi: VSI associated to the ring container
@@ -3597,10 +3589,10 @@ ice_get_per_q_coalesce(struct net_device *netdev, u32 q_num,
  * Returns 0 on success, negative otherwise.
  */
 static int
-ice_set_rc_coalesce(enum ice_container_type c_type, struct ethtool_coalesce *ec,
+ice_set_rc_coalesce(struct ethtool_coalesce *ec,
 		    struct ice_ring_container *rc, struct ice_vsi *vsi)
 {
-	const char *c_type_str = (c_type == ICE_RX_CONTAINER) ? "rx" : "tx";
+	const char *c_type_str = (rc->type == ICE_RX_CONTAINER) ? "rx" : "tx";
 	u32 use_adaptive_coalesce, coalesce_usecs;
 	struct ice_pf *pf = vsi->back;
 	u16 itr_setting;
@@ -3608,7 +3600,7 @@ ice_set_rc_coalesce(enum ice_container_type c_type, struct ethtool_coalesce *ec,
 	if (!rc->ring)
 		return -EINVAL;
 
-	switch (c_type) {
+	switch (rc->type) {
 	case ICE_RX_CONTAINER:
 		if (ec->rx_coalesce_usecs_high > ICE_MAX_INTRL ||
 		    (ec->rx_coalesce_usecs_high &&
@@ -3641,7 +3633,7 @@ ice_set_rc_coalesce(enum ice_container_type c_type, struct ethtool_coalesce *ec,
 		break;
 	default:
 		dev_dbg(ice_pf_to_dev(pf), "Invalid container type %d\n",
-			c_type);
+			rc->type);
 		return -EINVAL;
 	}
 
@@ -3690,22 +3682,22 @@ static int
 ice_set_q_coalesce(struct ice_vsi *vsi, struct ethtool_coalesce *ec, int q_num)
 {
 	if (q_num < vsi->num_rxq && q_num < vsi->num_txq) {
-		if (ice_set_rc_coalesce(ICE_RX_CONTAINER, ec,
+		if (ice_set_rc_coalesce(ec,
 					&vsi->rx_rings[q_num]->q_vector->rx,
 					vsi))
 			return -EINVAL;
 
-		if (ice_set_rc_coalesce(ICE_TX_CONTAINER, ec,
+		if (ice_set_rc_coalesce(ec,
 					&vsi->tx_rings[q_num]->q_vector->tx,
 					vsi))
 			return -EINVAL;
 	} else if (q_num < vsi->num_rxq) {
-		if (ice_set_rc_coalesce(ICE_RX_CONTAINER, ec,
+		if (ice_set_rc_coalesce(ec,
 					&vsi->rx_rings[q_num]->q_vector->rx,
 					vsi))
 			return -EINVAL;
 	} else if (q_num < vsi->num_txq) {
-		if (ice_set_rc_coalesce(ICE_TX_CONTAINER, ec,
+		if (ice_set_rc_coalesce(ec,
 					&vsi->tx_rings[q_num]->q_vector->tx,
 					vsi))
 			return -EINVAL;
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.h b/drivers/net/ethernet/intel/ice/ice_txrx.h
index 7c2328529ff8..69f78a1c234f 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.h
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.h
@@ -332,6 +332,11 @@ static inline bool ice_ring_is_xdp(struct ice_ring *ring)
 	return !!(ring->flags & ICE_TX_FLAGS_RING_XDP);
 }
 
+enum ice_container_type {
+	ICE_RX_CONTAINER,
+	ICE_TX_CONTAINER,
+};
+
 struct ice_ring_container {
 	/* head of linked-list of rings */
 	struct ice_ring *ring;
@@ -343,6 +348,7 @@ struct ice_ring_container {
 	u16 itr_setting:13;
 	u16 itr_reserved:2;
 	u16 itr_mode:1;
+	enum ice_container_type type;
 };
 
 struct ice_coalesce_stored {
-- 
2.35.1

[PATCH 5.15 086/132] ice: Fix interrupt moderation settings getting cleared

[Greg Kroah-Hartman]

From: Michal Wilczynski <michal.wilczynski@intel.com>

[ Upstream commit bf13502ed5f941b0777b3fd1e24dac5d93f3886c ]

Adaptive-rx and Adaptive-tx are interrupt moderation settings
that can be enabled/disabled using ethtool:
ethtool -C ethX adaptive-rx on/off adaptive-tx on/off

Unfortunately those settings are getting cleared after
changing number of queues, or in ethtool world 'channels':
ethtool -L ethX rx 1 tx 1

Clearing was happening due to introduction of bit fields
in ice_ring_container struct. This way only itr_setting
bits were rebuilt during ice_vsi_rebuild_set_coalesce().

Introduce an anonymous struct of bitfields and create a
union to refer to them as a single variable.
This way variable can be easily saved and restored.

Fixes: 61dc79ced7aa ("ice: Restore interrupt throttle settings after VSI rebuild")
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_lib.c  | 16 ++++++++--------
 drivers/net/ethernet/intel/ice/ice_txrx.h | 11 ++++++++---
 2 files changed, 16 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index 653996e8fd30..4417238b0e64 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -2980,8 +2980,8 @@ ice_vsi_rebuild_get_coalesce(struct ice_vsi *vsi,
 	ice_for_each_q_vector(vsi, i) {
 		struct ice_q_vector *q_vector = vsi->q_vectors[i];
 
-		coalesce[i].itr_tx = q_vector->tx.itr_setting;
-		coalesce[i].itr_rx = q_vector->rx.itr_setting;
+		coalesce[i].itr_tx = q_vector->tx.itr_settings;
+		coalesce[i].itr_rx = q_vector->rx.itr_settings;
 		coalesce[i].intrl = q_vector->intrl;
 
 		if (i < vsi->num_txq)
@@ -3037,21 +3037,21 @@ ice_vsi_rebuild_set_coalesce(struct ice_vsi *vsi,
 		 */
 		if (i < vsi->alloc_rxq && coalesce[i].rx_valid) {
 			rc = &vsi->q_vectors[i]->rx;
-			rc->itr_setting = coalesce[i].itr_rx;
+			rc->itr_settings = coalesce[i].itr_rx;
 			ice_write_itr(rc, rc->itr_setting);
 		} else if (i < vsi->alloc_rxq) {
 			rc = &vsi->q_vectors[i]->rx;
-			rc->itr_setting = coalesce[0].itr_rx;
+			rc->itr_settings = coalesce[0].itr_rx;
 			ice_write_itr(rc, rc->itr_setting);
 		}
 
 		if (i < vsi->alloc_txq && coalesce[i].tx_valid) {
 			rc = &vsi->q_vectors[i]->tx;
-			rc->itr_setting = coalesce[i].itr_tx;
+			rc->itr_settings = coalesce[i].itr_tx;
 			ice_write_itr(rc, rc->itr_setting);
 		} else if (i < vsi->alloc_txq) {
 			rc = &vsi->q_vectors[i]->tx;
-			rc->itr_setting = coalesce[0].itr_tx;
+			rc->itr_settings = coalesce[0].itr_tx;
 			ice_write_itr(rc, rc->itr_setting);
 		}
 
@@ -3065,12 +3065,12 @@ ice_vsi_rebuild_set_coalesce(struct ice_vsi *vsi,
 	for (; i < vsi->num_q_vectors; i++) {
 		/* transmit */
 		rc = &vsi->q_vectors[i]->tx;
-		rc->itr_setting = coalesce[0].itr_tx;
+		rc->itr_settings = coalesce[0].itr_tx;
 		ice_write_itr(rc, rc->itr_setting);
 
 		/* receive */
 		rc = &vsi->q_vectors[i]->rx;
-		rc->itr_setting = coalesce[0].itr_rx;
+		rc->itr_settings = coalesce[0].itr_rx;
 		ice_write_itr(rc, rc->itr_setting);
 
 		vsi->q_vectors[i]->intrl = coalesce[0].intrl;
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.h b/drivers/net/ethernet/intel/ice/ice_txrx.h
index 69f78a1c234f..4adc3dff04ba 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.h
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.h
@@ -345,9 +345,14 @@ struct ice_ring_container {
 	/* this matches the maximum number of ITR bits, but in usec
 	 * values, so it is shifted left one bit (bit zero is ignored)
 	 */
-	u16 itr_setting:13;
-	u16 itr_reserved:2;
-	u16 itr_mode:1;
+	union {
+		struct {
+			u16 itr_setting:13;
+			u16 itr_reserved:2;
+			u16 itr_mode:1;
+		};
+		u16 itr_settings;
+	};
 	enum ice_container_type type;
 };
 
-- 
2.35.1

[PATCH 5.15 087/132] clk: at91: generated: consider range when calculating best rate

[Greg Kroah-Hartman]

From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>

[ Upstream commit d0031e6fbed955ff8d5f5bbc8fe7382482559cec ]

clk_generated_best_diff() helps in finding the parent and the divisor to
compute a rate closest to the required one. However, it doesn't take into
account the request's range for the new rate. Make sure the new rate
is within the required range.

Fixes: 8a8f4bf0c480 ("clk: at91: clk-generated: create function to find best_diff")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220413071318.244912-1-codrin.ciubotariu@microchip.com
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/at91/clk-generated.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index b656d25a9767..fe772baeb15f 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -106,6 +106,10 @@ static void clk_generated_best_diff(struct clk_rate_request *req,
 		tmp_rate = parent_rate;
 	else
 		tmp_rate = parent_rate / div;
+
+	if (tmp_rate < req->min_rate || tmp_rate > req->max_rate)
+		return;
+
 	tmp_diff = abs(req->rate - tmp_rate);
 
 	if (*best_diff < 0 || *best_diff >= tmp_diff) {
-- 
2.35.1

[PATCH 5.15 088/132] net/qla3xxx: Fix a test in ql_reset_work()

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 5361448e45fac6fb96738df748229432a62d78b6 ]

test_bit() tests if one bit is set or not.
Here the logic seems to check of bit QL_RESET_PER_SCSI (i.e. 4) OR bit
QL_RESET_START (i.e. 3) is set.

In fact, it checks if bit 7 (4 | 3 = 7) is set, that is to say
QL_ADAPTER_UP.

This looks harmless, because this bit is likely be set, and when the
ql_reset_work() delayed work is scheduled in ql3xxx_isr() (the only place
that schedule this work), QL_RESET_START or QL_RESET_PER_SCSI is set.

This has been spotted by smatch.

Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/80e73e33f390001d9c0140ffa9baddf6466a41a2.1652637337.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qla3xxx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qla3xxx.c b/drivers/net/ethernet/qlogic/qla3xxx.c
index 4eb9ea280474..40d14d80f6f1 100644
--- a/drivers/net/ethernet/qlogic/qla3xxx.c
+++ b/drivers/net/ethernet/qlogic/qla3xxx.c
@@ -3612,7 +3612,8 @@ static void ql_reset_work(struct work_struct *work)
 		qdev->mem_map_registers;
 	unsigned long hw_flags;
 
-	if (test_bit((QL_RESET_PER_SCSI | QL_RESET_START), &qdev->flags)) {
+	if (test_bit(QL_RESET_PER_SCSI, &qdev->flags) ||
+	    test_bit(QL_RESET_START, &qdev->flags)) {
 		clear_bit(QL_LINK_MASTER, &qdev->flags);
 
 		/*
-- 
2.35.1

[PATCH 5.15 089/132] NFC: nci: fix sleep in atomic context bugs caused by nci_skb_alloc

[Greg Kroah-Hartman]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 23dd4581350d4ffa23d58976ec46408f8f4c1e16 ]

There are sleep in atomic context bugs when the request to secure
element of st-nci is timeout. The root cause is that nci_skb_alloc
with GFP_KERNEL parameter is called in st_nci_se_wt_timeout which is
a timer handler. The call paths that could trigger bugs are shown below:

    (interrupt context 1)
st_nci_se_wt_timeout
  nci_hci_send_event
    nci_hci_send_data
      nci_skb_alloc(..., GFP_KERNEL) //may sleep

   (interrupt context 2)
st_nci_se_wt_timeout
  nci_hci_send_event
    nci_hci_send_data
      nci_send_data
        nci_queue_tx_data_frags
          nci_skb_alloc(..., GFP_KERNEL) //may sleep

This patch changes allocation mode of nci_skb_alloc from GFP_KERNEL to
GFP_ATOMIC in order to prevent atomic context sleeping. The GFP_ATOMIC
flag makes memory allocation operation could be used in atomic context.

Fixes: ed06aeefdac3 ("nfc: st-nci: Rename st21nfcb to st-nci")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220517012530.75714-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/nfc/nci/data.c | 2 +-
 net/nfc/nci/hci.c  | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/nfc/nci/data.c b/net/nfc/nci/data.c
index 6055dc9a82aa..aa5e712adf07 100644
--- a/net/nfc/nci/data.c
+++ b/net/nfc/nci/data.c
@@ -118,7 +118,7 @@ static int nci_queue_tx_data_frags(struct nci_dev *ndev,
 
 		skb_frag = nci_skb_alloc(ndev,
 					 (NCI_DATA_HDR_SIZE + frag_len),
-					 GFP_KERNEL);
+					 GFP_ATOMIC);
 		if (skb_frag == NULL) {
 			rc = -ENOMEM;
 			goto free_exit;
diff --git a/net/nfc/nci/hci.c b/net/nfc/nci/hci.c
index e199912ee1e5..85b808fdcbc3 100644
--- a/net/nfc/nci/hci.c
+++ b/net/nfc/nci/hci.c
@@ -153,7 +153,7 @@ static int nci_hci_send_data(struct nci_dev *ndev, u8 pipe,
 
 	i = 0;
 	skb = nci_skb_alloc(ndev, conn_info->max_pkt_payload_len +
-			    NCI_DATA_HDR_SIZE, GFP_KERNEL);
+			    NCI_DATA_HDR_SIZE, GFP_ATOMIC);
 	if (!skb)
 		return -ENOMEM;
 
@@ -184,7 +184,7 @@ static int nci_hci_send_data(struct nci_dev *ndev, u8 pipe,
 		if (i < data_len) {
 			skb = nci_skb_alloc(ndev,
 					    conn_info->max_pkt_payload_len +
-					    NCI_DATA_HDR_SIZE, GFP_KERNEL);
+					    NCI_DATA_HDR_SIZE, GFP_ATOMIC);
 			if (!skb)
 				return -ENOMEM;
 
-- 
2.35.1

[PATCH 5.15 090/132] net/mlx5: DR, Fix missing flow_source when creating multi-destination FW table

[Greg Kroah-Hartman]

From: Maor Dickman <maord@nvidia.com>

[ Upstream commit 2c5fc6cd269ad3476da99dad02521d2af4a8e906 ]

In order to support multiple destination FTEs with SW steering
FW table is created with single FTE with multiple actions and
SW steering rule forward to it. When creating this table, flow
source isn't set according to the original FTE.

Fix this by passing the original FTE flow source to the created
FW table.

Fixes: 34583beea4b7 ("net/mlx5: DR, Create multi-destination table for SW-steering use")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlx5/core/steering/dr_action.c    | 6 ++++--
 drivers/net/ethernet/mellanox/mlx5/core/steering/dr_fw.c    | 4 +++-
 drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h | 3 ++-
 drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c    | 4 +++-
 drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h   | 3 ++-
 5 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c
index a5b9f65db23c..897c7f852123 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_action.c
@@ -846,7 +846,8 @@ struct mlx5dr_action *
 mlx5dr_action_create_mult_dest_tbl(struct mlx5dr_domain *dmn,
 				   struct mlx5dr_action_dest *dests,
 				   u32 num_of_dests,
-				   bool ignore_flow_level)
+				   bool ignore_flow_level,
+				   u32 flow_source)
 {
 	struct mlx5dr_cmd_flow_destination_hw_info *hw_dests;
 	struct mlx5dr_action **ref_actions;
@@ -914,7 +915,8 @@ mlx5dr_action_create_mult_dest_tbl(struct mlx5dr_domain *dmn,
 				      reformat_req,
 				      &action->dest_tbl->fw_tbl.id,
 				      &action->dest_tbl->fw_tbl.group_id,
-				      ignore_flow_level);
+				      ignore_flow_level,
+				      flow_source);
 	if (ret)
 		goto free_action;
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_fw.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_fw.c
index 0d6f86eb248b..c74083de1801 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_fw.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_fw.c
@@ -104,7 +104,8 @@ int mlx5dr_fw_create_md_tbl(struct mlx5dr_domain *dmn,
 			    bool reformat_req,
 			    u32 *tbl_id,
 			    u32 *group_id,
-			    bool ignore_flow_level)
+			    bool ignore_flow_level,
+			    u32 flow_source)
 {
 	struct mlx5dr_cmd_create_flow_table_attr ft_attr = {};
 	struct mlx5dr_cmd_fte_info fte_info = {};
@@ -139,6 +140,7 @@ int mlx5dr_fw_create_md_tbl(struct mlx5dr_domain *dmn,
 	fte_info.val = val;
 	fte_info.dest_arr = dest;
 	fte_info.ignore_flow_level = ignore_flow_level;
+	fte_info.flow_context.flow_source = flow_source;
 
 	ret = mlx5dr_cmd_set_fte(dmn->mdev, 0, 0, &ft_info, *group_id, &fte_info);
 	if (ret) {
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h
index 3d4e035698dd..bc206836af6a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_types.h
@@ -1394,7 +1394,8 @@ int mlx5dr_fw_create_md_tbl(struct mlx5dr_domain *dmn,
 			    bool reformat_req,
 			    u32 *tbl_id,
 			    u32 *group_id,
-			    bool ignore_flow_level);
+			    bool ignore_flow_level,
+			    u32 flow_source);
 void mlx5dr_fw_destroy_md_tbl(struct mlx5dr_domain *dmn, u32 tbl_id,
 			      u32 group_id);
 #endif  /* _DR_TYPES_H_ */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c
index 7e58f4e594b7..ae4597118f8b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/fs_dr.c
@@ -492,11 +492,13 @@ static int mlx5_cmd_dr_create_fte(struct mlx5_flow_root_namespace *ns,
 	} else if (num_term_actions > 1) {
 		bool ignore_flow_level =
 			!!(fte->action.flags & FLOW_ACT_IGNORE_FLOW_LEVEL);
+		u32 flow_source = fte->flow_context.flow_source;
 
 		tmp_action = mlx5dr_action_create_mult_dest_tbl(domain,
 								term_actions,
 								num_term_actions,
-								ignore_flow_level);
+								ignore_flow_level,
+								flow_source);
 		if (!tmp_action) {
 			err = -EOPNOTSUPP;
 			goto free_actions;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h b/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h
index 5ef199543479..7806e5c05b67 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/mlx5dr.h
@@ -96,7 +96,8 @@ struct mlx5dr_action *
 mlx5dr_action_create_mult_dest_tbl(struct mlx5dr_domain *dmn,
 				   struct mlx5dr_action_dest *dests,
 				   u32 num_of_dests,
-				   bool ignore_flow_level);
+				   bool ignore_flow_level,
+				   u32 flow_source);
 
 struct mlx5dr_action *mlx5dr_action_create_drop(void);
 
-- 
2.35.1

[PATCH 5.15 091/132] net/mlx5e: Properly block LRO when XDP is enabled

[Greg Kroah-Hartman]

From: Maxim Mikityanskiy <maximmi@nvidia.com>

[ Upstream commit cf6e34c8c22fba66bd21244b95ea47e235f68974 ]

LRO is incompatible and mutually exclusive with XDP. However, the needed
checks are only made when enabling XDP. If LRO is enabled when XDP is
already active, the command will succeed, and XDP will be skipped in the
data path, although still enabled.

This commit fixes the bug by checking the XDP status in
mlx5e_fix_features and disabling LRO if XDP is enabled.

Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 01301bee420c..7efb898e9f96 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -3542,6 +3542,13 @@ static netdev_features_t mlx5e_fix_features(struct net_device *netdev,
 		}
 	}
 
+	if (params->xdp_prog) {
+		if (features & NETIF_F_LRO) {
+			netdev_warn(netdev, "LRO is incompatible with XDP\n");
+			features &= ~NETIF_F_LRO;
+		}
+	}
+
 	if (MLX5E_GET_PFLAG(params, MLX5E_PFLAG_RX_CQE_COMPRESS)) {
 		features &= ~NETIF_F_RXHASH;
 		if (netdev->features & NETIF_F_RXHASH)
-- 
2.35.1

[PATCH 5.15 092/132] net: af_key: add check for pfkey_broadcast in function pfkey_process

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit 4dc2a5a8f6754492180741facf2a8787f2c415d7 ]

If skb_clone() returns null pointer, pfkey_broadcast() will
return error.
Therefore, it should be better to check the return value of
pfkey_broadcast() and return error if fails.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/key/af_key.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/key/af_key.c b/net/key/af_key.c
index fd51db3be91c..92e9d75dba2f 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -2826,8 +2826,10 @@ static int pfkey_process(struct sock *sk, struct sk_buff *skb, const struct sadb
 	void *ext_hdrs[SADB_EXT_MAX];
 	int err;
 
-	pfkey_broadcast(skb_clone(skb, GFP_KERNEL), GFP_KERNEL,
-			BROADCAST_PROMISC_ONLY, NULL, sock_net(sk));
+	err = pfkey_broadcast(skb_clone(skb, GFP_KERNEL), GFP_KERNEL,
+			      BROADCAST_PROMISC_ONLY, NULL, sock_net(sk));
+	if (err)
+		return err;
 
 	memset(ext_hdrs, 0, sizeof(ext_hdrs));
 	err = parse_exthdrs(skb, hdr, ext_hdrs);
-- 
2.35.1

[PATCH 5.15 093/132] ARM: 9196/1: spectre-bhb: enable for Cortex-A15

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 0dc14aa94ccd8ba35eb17a0f9b123d1566efd39e ]

The Spectre-BHB mitigations were inadvertently left disabled for
Cortex-A15, due to the fact that cpu_v7_bugs_init() is not called in
that case. So fix that.

Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/proc-v7-bugs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c
index 06dbfb968182..fb9f3eb6bf48 100644
--- a/arch/arm/mm/proc-v7-bugs.c
+++ b/arch/arm/mm/proc-v7-bugs.c
@@ -288,6 +288,7 @@ void cpu_v7_ca15_ibe(void)
 {
 	if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(0)))
 		cpu_v7_spectre_v2_init();
+	cpu_v7_spectre_bhb_init();
 }
 
 void cpu_v7_bugs_init(void)
-- 
2.35.1

[PATCH 5.15 094/132] ARM: 9197/1: spectre-bhb: fix loop8 sequence for Thumb2

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ardb@kernel.org>

[ Upstream commit 3cfb3019979666bdf33a1010147363cf05e0f17b ]

In Thumb2, 'b . + 4' produces a branch instruction that uses a narrow
encoding, and so it does not jump to the following instruction as
expected. So use W(b) instead.

Fixes: 6c7cb60bff7a ("ARM: fix Thumb2 regression with Spectre BHB")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/entry-armv.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 46b697dfa4cf..68261a83b7ad 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -1038,7 +1038,7 @@ vector_bhb_loop8_\name:
 
 	@ bhb workaround
 	mov	r0, #8
-3:	b	. + 4
+3:	W(b)	. + 4
 	subs	r0, r0, #1
 	bne	3b
 	dsb
-- 
2.35.1

[PATCH 5.15 095/132] mptcp: change the parameter of __mptcp_make_csum

[Greg Kroah-Hartman]

From: Geliang Tang <geliang.tang@suse.com>

[ Upstream commit c312ee219100e86143a1d3cc10b367bc43a0e0b8 ]

This patch changed the type of the last parameter of __mptcp_make_csum()
from __sum16 to __wsum. And export this function in protocol.h.

Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mptcp/options.c  | 8 ++++----
 net/mptcp/protocol.h | 1 +
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/net/mptcp/options.c b/net/mptcp/options.c
index e515ba9ccb5d..d158f53d3bc3 100644
--- a/net/mptcp/options.c
+++ b/net/mptcp/options.c
@@ -1214,7 +1214,7 @@ static void mptcp_set_rwin(const struct tcp_sock *tp)
 		WRITE_ONCE(msk->rcv_wnd_sent, ack_seq);
 }
 
-static u16 __mptcp_make_csum(u64 data_seq, u32 subflow_seq, u16 data_len, __sum16 sum)
+u16 __mptcp_make_csum(u64 data_seq, u32 subflow_seq, u16 data_len, __wsum sum)
 {
 	struct csum_pseudo_header header;
 	__wsum csum;
@@ -1229,14 +1229,14 @@ static u16 __mptcp_make_csum(u64 data_seq, u32 subflow_seq, u16 data_len, __sum1
 	header.data_len = htons(data_len);
 	header.csum = 0;
 
-	csum = csum_partial(&header, sizeof(header), ~csum_unfold(sum));
+	csum = csum_partial(&header, sizeof(header), sum);
 	return (__force u16)csum_fold(csum);
 }
 
 static u16 mptcp_make_csum(const struct mptcp_ext *mpext)
 {
 	return __mptcp_make_csum(mpext->data_seq, mpext->subflow_seq, mpext->data_len,
-				 mpext->csum);
+				 ~csum_unfold(mpext->csum));
 }
 
 void mptcp_write_options(__be32 *ptr, const struct tcp_sock *tp,
@@ -1368,7 +1368,7 @@ void mptcp_write_options(__be32 *ptr, const struct tcp_sock *tp,
 					   __mptcp_make_csum(opts->data_seq,
 							     opts->subflow_seq,
 							     opts->data_len,
-							     opts->csum), ptr);
+							     ~csum_unfold(opts->csum)), ptr);
 		} else {
 			put_unaligned_be32(opts->data_len << 16 |
 					   TCPOPT_NOP << 8 | TCPOPT_NOP, ptr);
diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h
index 82c5dc4d6b49..6bcdaf01f483 100644
--- a/net/mptcp/protocol.h
+++ b/net/mptcp/protocol.h
@@ -718,6 +718,7 @@ void mptcp_token_destroy(struct mptcp_sock *msk);
 void mptcp_crypto_key_sha(u64 key, u32 *token, u64 *idsn);
 
 void mptcp_crypto_hmac_sha(u64 key1, u64 key2, u8 *msg, int len, void *hmac);
+u16 __mptcp_make_csum(u64 data_seq, u32 subflow_seq, u16 data_len, __wsum sum);
 
 void __init mptcp_pm_init(void);
 void mptcp_pm_data_init(struct mptcp_sock *msk);
-- 
2.35.1

[PATCH 5.15 096/132] mptcp: reuse __mptcp_make_csum in validate_data_csum

[Greg Kroah-Hartman]

From: Geliang Tang <geliang.tang@suse.com>

[ Upstream commit 8401e87f5a36d370cbf1e9d4ba602a553ce9324a ]

This patch reused __mptcp_make_csum() in validate_data_csum() instead of
open-coding.

Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mptcp/subflow.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
index 6172f380dfb7..04afead7316f 100644
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -845,9 +845,8 @@ static enum mapping_status validate_data_csum(struct sock *ssk, struct sk_buff *
 					      bool csum_reqd)
 {
 	struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(ssk);
-	struct csum_pseudo_header header;
 	u32 offset, seq, delta;
-	__wsum csum;
+	u16 csum;
 	int len;
 
 	if (!csum_reqd)
@@ -908,13 +907,11 @@ static enum mapping_status validate_data_csum(struct sock *ssk, struct sk_buff *
 	 * while the pseudo header requires the original DSS data len,
 	 * including that
 	 */
-	header.data_seq = cpu_to_be64(subflow->map_seq);
-	header.subflow_seq = htonl(subflow->map_subflow_seq);
-	header.data_len = htons(subflow->map_data_len + subflow->map_data_fin);
-	header.csum = 0;
-
-	csum = csum_partial(&header, sizeof(header), subflow->map_data_csum);
-	if (unlikely(csum_fold(csum))) {
+	csum = __mptcp_make_csum(subflow->map_seq,
+				 subflow->map_subflow_seq,
+				 subflow->map_data_len + subflow->map_data_fin,
+				 subflow->map_data_csum);
+	if (unlikely(csum)) {
 		MPTCP_INC_STATS(sock_net(ssk), MPTCP_MIB_DATACSUMERR);
 		subflow->send_mp_fail = 1;
 		MPTCP_INC_STATS(sock_net(ssk), MPTCP_MIB_MPFAILTX);
-- 
2.35.1

[PATCH 5.15 097/132] mptcp: fix checksum byte order

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit ba2c89e0ea74a904d5231643245753d77422e7f5 ]

The MPTCP code typecasts the checksum value to u16 and
then converts it to big endian while storing the value into
the MPTCP option.

As a result, the wire encoding for little endian host is
wrong, and that causes interoperabilty interoperability
issues with other implementation or host with different endianness.

Address the issue writing in the packet the unmodified __sum16 value.

MPTCP checksum is disabled by default, interoperating with systems
with bad mptcp-level csum encoding should cause fallback to TCP.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/275
Fixes: c5b39e26d003 ("mptcp: send out checksum for DSS")
Fixes: 390b95a5fb84 ("mptcp: receive checksum for DSS")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mptcp/options.c  | 36 ++++++++++++++++++++++++------------
 net/mptcp/protocol.h |  2 +-
 net/mptcp/subflow.c  |  2 +-
 3 files changed, 26 insertions(+), 14 deletions(-)

diff --git a/net/mptcp/options.c b/net/mptcp/options.c
index d158f53d3bc3..193f0fcce8d8 100644
--- a/net/mptcp/options.c
+++ b/net/mptcp/options.c
@@ -107,7 +107,7 @@ static void mptcp_parse_option(const struct sk_buff *skb,
 			ptr += 2;
 		}
 		if (opsize == TCPOLEN_MPTCP_MPC_ACK_DATA_CSUM) {
-			mp_opt->csum = (__force __sum16)get_unaligned_be16(ptr);
+			mp_opt->csum = get_unaligned((__force __sum16 *)ptr);
 			mp_opt->suboptions |= OPTION_MPTCP_CSUMREQD;
 			ptr += 2;
 		}
@@ -221,7 +221,7 @@ static void mptcp_parse_option(const struct sk_buff *skb,
 
 			if (opsize == expected_opsize + TCPOLEN_MPTCP_DSS_CHECKSUM) {
 				mp_opt->suboptions |= OPTION_MPTCP_CSUMREQD;
-				mp_opt->csum = (__force __sum16)get_unaligned_be16(ptr);
+				mp_opt->csum = get_unaligned((__force __sum16 *)ptr);
 				ptr += 2;
 			}
 
@@ -1214,7 +1214,7 @@ static void mptcp_set_rwin(const struct tcp_sock *tp)
 		WRITE_ONCE(msk->rcv_wnd_sent, ack_seq);
 }
 
-u16 __mptcp_make_csum(u64 data_seq, u32 subflow_seq, u16 data_len, __wsum sum)
+__sum16 __mptcp_make_csum(u64 data_seq, u32 subflow_seq, u16 data_len, __wsum sum)
 {
 	struct csum_pseudo_header header;
 	__wsum csum;
@@ -1230,15 +1230,25 @@ u16 __mptcp_make_csum(u64 data_seq, u32 subflow_seq, u16 data_len, __wsum sum)
 	header.csum = 0;
 
 	csum = csum_partial(&header, sizeof(header), sum);
-	return (__force u16)csum_fold(csum);
+	return csum_fold(csum);
 }
 
-static u16 mptcp_make_csum(const struct mptcp_ext *mpext)
+static __sum16 mptcp_make_csum(const struct mptcp_ext *mpext)
 {
 	return __mptcp_make_csum(mpext->data_seq, mpext->subflow_seq, mpext->data_len,
 				 ~csum_unfold(mpext->csum));
 }
 
+static void put_len_csum(u16 len, __sum16 csum, void *data)
+{
+	__sum16 *sumptr = data + 2;
+	__be16 *ptr = data;
+
+	put_unaligned_be16(len, ptr);
+
+	put_unaligned(csum, sumptr);
+}
+
 void mptcp_write_options(__be32 *ptr, const struct tcp_sock *tp,
 			 struct mptcp_out_options *opts)
 {
@@ -1315,8 +1325,9 @@ void mptcp_write_options(__be32 *ptr, const struct tcp_sock *tp,
 			put_unaligned_be32(mpext->subflow_seq, ptr);
 			ptr += 1;
 			if (opts->csum_reqd) {
-				put_unaligned_be32(mpext->data_len << 16 |
-						   mptcp_make_csum(mpext), ptr);
+				put_len_csum(mpext->data_len,
+					     mptcp_make_csum(mpext),
+					     ptr);
 			} else {
 				put_unaligned_be32(mpext->data_len << 16 |
 						   TCPOPT_NOP << 8 | TCPOPT_NOP, ptr);
@@ -1364,11 +1375,12 @@ void mptcp_write_options(__be32 *ptr, const struct tcp_sock *tp,
 			goto mp_capable_done;
 
 		if (opts->csum_reqd) {
-			put_unaligned_be32(opts->data_len << 16 |
-					   __mptcp_make_csum(opts->data_seq,
-							     opts->subflow_seq,
-							     opts->data_len,
-							     ~csum_unfold(opts->csum)), ptr);
+			put_len_csum(opts->data_len,
+				     __mptcp_make_csum(opts->data_seq,
+						       opts->subflow_seq,
+						       opts->data_len,
+						       ~csum_unfold(opts->csum)),
+				     ptr);
 		} else {
 			put_unaligned_be32(opts->data_len << 16 |
 					   TCPOPT_NOP << 8 | TCPOPT_NOP, ptr);
diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h
index 6bcdaf01f483..72a259a74b57 100644
--- a/net/mptcp/protocol.h
+++ b/net/mptcp/protocol.h
@@ -718,7 +718,7 @@ void mptcp_token_destroy(struct mptcp_sock *msk);
 void mptcp_crypto_key_sha(u64 key, u32 *token, u64 *idsn);
 
 void mptcp_crypto_hmac_sha(u64 key1, u64 key2, u8 *msg, int len, void *hmac);
-u16 __mptcp_make_csum(u64 data_seq, u32 subflow_seq, u16 data_len, __wsum sum);
+__sum16 __mptcp_make_csum(u64 data_seq, u32 subflow_seq, u16 data_len, __wsum sum);
 
 void __init mptcp_pm_init(void);
 void mptcp_pm_data_init(struct mptcp_sock *msk);
diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
index 04afead7316f..9c7deffe7cb6 100644
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -846,7 +846,7 @@ static enum mapping_status validate_data_csum(struct sock *ssk, struct sk_buff *
 {
 	struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(ssk);
 	u32 offset, seq, delta;
-	u16 csum;
+	__sum16 csum;
 	int len;
 
 	if (!csum_reqd)
-- 
2.35.1

[PATCH 5.15 098/132] mptcp: strict local address ID selection

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit 4cf86ae84c718333928fd2d43168a1e359a28329 ]

The address ID selection for MPJ subflows created in response
to incoming ADD_ADDR option is currently unreliable: it happens
at MPJ socket creation time, when the local address could be
unknown.

Additionally, if the no local endpoint is available for the local
address, a new dummy endpoint is created, confusing the user-land.

This change refactor the code to move the address ID selection inside
the rebuild_header() helper, when the local address eventually
selected by the route lookup is finally known. If the address used
is not mapped by any endpoint - and thus can't be advertised/removed
pick the id 0 instead of allocate a new endpoint.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mptcp/pm_netlink.c | 13 --------
 net/mptcp/protocol.c   |  3 ++
 net/mptcp/protocol.h   |  3 +-
 net/mptcp/subflow.c    | 67 ++++++++++++++++++++++++++++++++++++------
 4 files changed, 63 insertions(+), 23 deletions(-)

diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c
index cf0f700f46dd..e6b95d1cba70 100644
--- a/net/mptcp/pm_netlink.c
+++ b/net/mptcp/pm_netlink.c
@@ -86,16 +86,6 @@ static bool addresses_equal(const struct mptcp_addr_info *a,
 	return a->port == b->port;
 }
 
-static bool address_zero(const struct mptcp_addr_info *addr)
-{
-	struct mptcp_addr_info zero;
-
-	memset(&zero, 0, sizeof(zero));
-	zero.family = addr->family;
-
-	return addresses_equal(addr, &zero, true);
-}
-
 static void local_address(const struct sock_common *skc,
 			  struct mptcp_addr_info *addr)
 {
@@ -954,9 +944,6 @@ int mptcp_pm_nl_get_local_id(struct mptcp_sock *msk, struct sock_common *skc)
 	if (addresses_equal(&msk_local, &skc_local, false))
 		return 0;
 
-	if (address_zero(&skc_local))
-		return 0;
-
 	pernet = net_generic(sock_net((struct sock *)msk), pm_nl_pernet_id);
 
 	rcu_read_lock();
diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index d6def23b8cba..c293742fc461 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -115,6 +115,9 @@ static int __mptcp_socket_create(struct mptcp_sock *msk)
 	list_add(&subflow->node, &msk->conn_list);
 	sock_hold(ssock->sk);
 	subflow->request_mptcp = 1;
+
+	/* This is the first subflow, always with id 0 */
+	subflow->local_id_valid = 1;
 	mptcp_sock_graft(msk->first, sk->sk_socket);
 
 	return 0;
diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h
index 72a259a74b57..8d70e491139a 100644
--- a/net/mptcp/protocol.h
+++ b/net/mptcp/protocol.h
@@ -436,7 +436,8 @@ struct mptcp_subflow_context {
 		rx_eof : 1,
 		can_ack : 1,        /* only after processing the remote a key */
 		disposable : 1,	    /* ctx can be free at ulp release time */
-		stale : 1;	    /* unable to snd/rcv data, do not use for xmit */
+		stale : 1,	    /* unable to snd/rcv data, do not use for xmit */
+		local_id_valid : 1; /* local_id is correctly initialized */
 	enum mptcp_data_avail data_avail;
 	u32	remote_nonce;
 	u64	thmac;
diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
index 9c7deffe7cb6..204dfb82f697 100644
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -483,6 +483,51 @@ static void subflow_finish_connect(struct sock *sk, const struct sk_buff *skb)
 	mptcp_subflow_reset(sk);
 }
 
+static void subflow_set_local_id(struct mptcp_subflow_context *subflow, int local_id)
+{
+	subflow->local_id = local_id;
+	subflow->local_id_valid = 1;
+}
+
+static int subflow_chk_local_id(struct sock *sk)
+{
+	struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(sk);
+	struct mptcp_sock *msk = mptcp_sk(subflow->conn);
+	int err;
+
+	if (likely(subflow->local_id_valid))
+		return 0;
+
+	err = mptcp_pm_get_local_id(msk, (struct sock_common *)sk);
+	if (err < 0)
+		return err;
+
+	subflow_set_local_id(subflow, err);
+	return 0;
+}
+
+static int subflow_rebuild_header(struct sock *sk)
+{
+	int err = subflow_chk_local_id(sk);
+
+	if (unlikely(err < 0))
+		return err;
+
+	return inet_sk_rebuild_header(sk);
+}
+
+#if IS_ENABLED(CONFIG_MPTCP_IPV6)
+static int subflow_v6_rebuild_header(struct sock *sk)
+{
+	int err = subflow_chk_local_id(sk);
+
+	if (unlikely(err < 0))
+		return err;
+
+	return inet6_sk_rebuild_header(sk);
+}
+#endif
+
 struct request_sock_ops mptcp_subflow_request_sock_ops;
 EXPORT_SYMBOL_GPL(mptcp_subflow_request_sock_ops);
 static struct tcp_request_sock_ops subflow_request_sock_ipv4_ops;
@@ -1402,13 +1447,8 @@ int __mptcp_subflow_connect(struct sock *sk, const struct mptcp_addr_info *loc,
 		get_random_bytes(&subflow->local_nonce, sizeof(u32));
 	} while (!subflow->local_nonce);
 
-	if (!local_id) {
-		err = mptcp_pm_get_local_id(msk, (struct sock_common *)ssk);
-		if (err < 0)
-			goto failed;
-
-		local_id = err;
-	}
+	if (local_id)
+		subflow_set_local_id(subflow, local_id);
 
 	mptcp_pm_get_flags_and_ifindex_by_id(sock_net(sk), local_id,
 					     &flags, &ifindex);
@@ -1431,7 +1471,6 @@ int __mptcp_subflow_connect(struct sock *sk, const struct mptcp_addr_info *loc,
 	pr_debug("msk=%p remote_token=%u local_id=%d remote_id=%d", msk,
 		 remote_token, local_id, remote_id);
 	subflow->remote_token = remote_token;
-	subflow->local_id = local_id;
 	subflow->remote_id = remote_id;
 	subflow->request_join = 1;
 	subflow->request_bkup = !!(flags & MPTCP_PM_ADDR_FLAG_BACKUP);
@@ -1734,15 +1773,22 @@ static void subflow_ulp_clone(const struct request_sock *req,
 		new_ctx->token = subflow_req->token;
 		new_ctx->ssn_offset = subflow_req->ssn_offset;
 		new_ctx->idsn = subflow_req->idsn;
+
+		/* this is the first subflow, id is always 0 */
+		new_ctx->local_id_valid = 1;
 	} else if (subflow_req->mp_join) {
 		new_ctx->ssn_offset = subflow_req->ssn_offset;
 		new_ctx->mp_join = 1;
 		new_ctx->fully_established = 1;
 		new_ctx->backup = subflow_req->backup;
-		new_ctx->local_id = subflow_req->local_id;
 		new_ctx->remote_id = subflow_req->remote_id;
 		new_ctx->token = subflow_req->token;
 		new_ctx->thmac = subflow_req->thmac;
+
+		/* the subflow req id is valid, fetched via subflow_check_req()
+		 * and subflow_token_join_request()
+		 */
+		subflow_set_local_id(new_ctx, subflow_req->local_id);
 	}
 }
 
@@ -1795,6 +1841,7 @@ void __init mptcp_subflow_init(void)
 	subflow_specific.conn_request = subflow_v4_conn_request;
 	subflow_specific.syn_recv_sock = subflow_syn_recv_sock;
 	subflow_specific.sk_rx_dst_set = subflow_finish_connect;
+	subflow_specific.rebuild_header = subflow_rebuild_header;
 
 	tcp_prot_override = tcp_prot;
 	tcp_prot_override.release_cb = tcp_release_cb_override;
@@ -1807,6 +1854,7 @@ void __init mptcp_subflow_init(void)
 	subflow_v6_specific.conn_request = subflow_v6_conn_request;
 	subflow_v6_specific.syn_recv_sock = subflow_syn_recv_sock;
 	subflow_v6_specific.sk_rx_dst_set = subflow_finish_connect;
+	subflow_v6_specific.rebuild_header = subflow_v6_rebuild_header;
 
 	subflow_v6m_specific = subflow_v6_specific;
 	subflow_v6m_specific.queue_xmit = ipv4_specific.queue_xmit;
@@ -1814,6 +1862,7 @@ void __init mptcp_subflow_init(void)
 	subflow_v6m_specific.net_header_len = ipv4_specific.net_header_len;
 	subflow_v6m_specific.mtu_reduced = ipv4_specific.mtu_reduced;
 	subflow_v6m_specific.net_frag_header_len = 0;
+	subflow_v6m_specific.rebuild_header = subflow_rebuild_header;
 
 	tcpv6_prot_override = tcpv6_prot;
 	tcpv6_prot_override.release_cb = tcp_release_cb_override;
-- 
2.35.1

[PATCH 5.15 099/132] mptcp: Do TCP fallback on early DSS checksum failure

[Greg Kroah-Hartman]

From: Mat Martineau <mathew.j.martineau@linux.intel.com>

[ Upstream commit ae66fb2ba6c3dcaf8b9612b65aa949a1a4bed150 ]

RFC 8684 section 3.7 describes several opportunities for a MPTCP
connection to "fall back" to regular TCP early in the connection
process, before it has been confirmed that MPTCP options can be
successfully propagated on all SYN, SYN/ACK, and data packets. If a peer
acknowledges the first received data packet with a regular TCP header
(no MPTCP options), fallback is allowed.

If the recipient of that first data packet finds a MPTCP DSS checksum
error, this provides an opportunity to fail gracefully with a TCP
fallback rather than resetting the connection (as might happen if a
checksum failure were detected later).

This commit modifies the checksum failure code to attempt fallback on
the initial subflow of a MPTCP connection, only if it's a failure in the
first data mapping. In cases where the peer initiates the connection,
requests checksums, is the first to send data, and the peer is sending
incorrect checksums (see
https://github.com/multipath-tcp/mptcp_net-next/issues/275), this allows
the connection to proceed as TCP rather than reset.

Fixes: dd8bcd1768ff ("mptcp: validate the data checksum")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mptcp/protocol.h |  3 ++-
 net/mptcp/subflow.c  | 21 ++++++++++++++++++---
 2 files changed, 20 insertions(+), 4 deletions(-)

diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h
index 8d70e491139a..62ad31482644 100644
--- a/net/mptcp/protocol.h
+++ b/net/mptcp/protocol.h
@@ -437,7 +437,8 @@ struct mptcp_subflow_context {
 		can_ack : 1,        /* only after processing the remote a key */
 		disposable : 1,	    /* ctx can be free at ulp release time */
 		stale : 1,	    /* unable to snd/rcv data, do not use for xmit */
-		local_id_valid : 1; /* local_id is correctly initialized */
+		local_id_valid : 1, /* local_id is correctly initialized */
+		valid_csum_seen : 1;        /* at least one csum validated */
 	enum mptcp_data_avail data_avail;
 	u32	remote_nonce;
 	u64	thmac;
diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c
index 204dfb82f697..c52a824c0669 100644
--- a/net/mptcp/subflow.c
+++ b/net/mptcp/subflow.c
@@ -958,11 +958,14 @@ static enum mapping_status validate_data_csum(struct sock *ssk, struct sk_buff *
 				 subflow->map_data_csum);
 	if (unlikely(csum)) {
 		MPTCP_INC_STATS(sock_net(ssk), MPTCP_MIB_DATACSUMERR);
-		subflow->send_mp_fail = 1;
-		MPTCP_INC_STATS(sock_net(ssk), MPTCP_MIB_MPFAILTX);
+		if (subflow->mp_join || subflow->valid_csum_seen) {
+			subflow->send_mp_fail = 1;
+			MPTCP_INC_STATS(sock_net(ssk), MPTCP_MIB_MPFAILTX);
+		}
 		return subflow->mp_join ? MAPPING_INVALID : MAPPING_DUMMY;
 	}
 
+	subflow->valid_csum_seen = 1;
 	return MAPPING_OK;
 }
 
@@ -1144,6 +1147,18 @@ static void subflow_sched_work_if_closed(struct mptcp_sock *msk, struct sock *ss
 	}
 }
 
+static bool subflow_can_fallback(struct mptcp_subflow_context *subflow)
+{
+	struct mptcp_sock *msk = mptcp_sk(subflow->conn);
+
+	if (subflow->mp_join)
+		return false;
+	else if (READ_ONCE(msk->csum_enabled))
+		return !subflow->valid_csum_seen;
+	else
+		return !subflow->fully_established;
+}
+
 static bool subflow_check_data_avail(struct sock *ssk)
 {
 	struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(ssk);
@@ -1221,7 +1236,7 @@ static bool subflow_check_data_avail(struct sock *ssk)
 		return true;
 	}
 
-	if (subflow->mp_join || subflow->fully_established) {
+	if (!subflow_can_fallback(subflow)) {
 		/* fatal protocol error, close the socket.
 		 * subflow_error_report() will introduce the appropriate barriers
 		 */
-- 
2.35.1

[PATCH 5.15 100/132] igb: skip phy status check where unavailable

[Greg Kroah-Hartman]

From: Kevin Mitchell <kevmitch@arista.com>

[ Upstream commit 942d2ad5d2e0df758a645ddfadffde2795322728 ]

igb_read_phy_reg() will silently return, leaving phy_data untouched, if
hw->ops.read_reg isn't set. Depending on the uninitialized value of
phy_data, this led to the phy status check either succeeding immediately
or looping continuously for 2 seconds before emitting a noisy err-level
timeout. This message went out to the console even though there was no
actual problem.

Instead, first check if there is read_reg function pointer. If not,
proceed without trying to check the phy status register.

Fixes: b72f3f72005d ("igb: When GbE link up, wait for Remote receiver status condition")
Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index bf8ef81f6c0e..b88303351484 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -5505,7 +5505,8 @@ static void igb_watchdog_task(struct work_struct *work)
 				break;
 			}
 
-			if (adapter->link_speed != SPEED_1000)
+			if (adapter->link_speed != SPEED_1000 ||
+			    !hw->phy.ops.read_reg)
 				goto no_wait;
 
 			/* wait for Remote receiver status OK */
-- 
2.35.1

[PATCH 5.15 101/132] netfilter: flowtable: fix TCP flow teardown

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit e5eaac2beb54f0a16ff851125082d9faeb475572 ]

This patch addresses three possible problems:

1. ct gc may race to undo the timeout adjustment of the packet path, leaving
   the conntrack entry in place with the internal offload timeout (one day).

2. ct gc removes the ct because the IPS_OFFLOAD_BIT is not set and the CLOSE
   timeout is reached before the flow offload del.

3. tcp ct is always set to ESTABLISHED with a very long timeout
   in flow offload teardown/delete even though the state might be already
   CLOSED. Also as a remark we cannot assume that the FIN or RST packet
   is hitting flow table teardown as the packet might get bumped to the
   slow path in nftables.

This patch resets IPS_OFFLOAD_BIT from flow_offload_teardown(), so
conntrack handles the tcp rst/fin packet which triggers the CLOSE/FIN
state transition.

Moreover, teturn the connection's ownership to conntrack upon teardown
by clearing the offload flag and fixing the established timeout value.
The flow table GC thread will asynchonrnously free the flow table and
hardware offload entries.

Before this patch, the IPS_OFFLOAD_BIT remained set for expired flows on
which is also misleading since the flow is back to classic conntrack
path.

If nf_ct_delete() removes the entry from the conntrack table, then it
calls nf_ct_put() which decrements the refcnt. This is not a problem
because the flowtable holds a reference to the conntrack object from
flow_offload_alloc() path which is released via flow_offload_free().

This patch also updates nft_flow_offload to skip packets in SYN_RECV
state. Since we might miss or bump packets to slow path, we do not know
what will happen there while we are still in SYN_RECV, this patch
postpones offload up to the next packet which also aligns to the
existing behaviour in tc-ct.

flow_offload_teardown() does not reset the existing tcp state from
flow_offload_fixup_tcp() to ESTABLISHED anymore, packets bump to slow
path might have already update the state to CLOSE/FIN.

Joint work with Oz and Sven.

Fixes: 1e5b2471bcc4 ("netfilter: nf_flow_table: teardown flow timeout race")
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_flow_table_core.c | 33 +++++++-----------------------
 net/netfilter/nft_flow_offload.c   |  3 ++-
 2 files changed, 9 insertions(+), 27 deletions(-)

diff --git a/net/netfilter/nf_flow_table_core.c b/net/netfilter/nf_flow_table_core.c
index 52e7f94d2450..58f3f77b3eb2 100644
--- a/net/netfilter/nf_flow_table_core.c
+++ b/net/netfilter/nf_flow_table_core.c
@@ -173,12 +173,11 @@ EXPORT_SYMBOL_GPL(flow_offload_route_init);
 
 static void flow_offload_fixup_tcp(struct ip_ct_tcp *tcp)
 {
-	tcp->state = TCP_CONNTRACK_ESTABLISHED;
 	tcp->seen[0].td_maxwin = 0;
 	tcp->seen[1].td_maxwin = 0;
 }
 
-static void flow_offload_fixup_ct_timeout(struct nf_conn *ct)
+static void flow_offload_fixup_ct(struct nf_conn *ct)
 {
 	struct net *net = nf_ct_net(ct);
 	int l4num = nf_ct_protonum(ct);
@@ -187,7 +186,9 @@ static void flow_offload_fixup_ct_timeout(struct nf_conn *ct)
 	if (l4num == IPPROTO_TCP) {
 		struct nf_tcp_net *tn = nf_tcp_pernet(net);
 
-		timeout = tn->timeouts[TCP_CONNTRACK_ESTABLISHED];
+		flow_offload_fixup_tcp(&ct->proto.tcp);
+
+		timeout = tn->timeouts[ct->proto.tcp.state];
 		timeout -= tn->offload_timeout;
 	} else if (l4num == IPPROTO_UDP) {
 		struct nf_udp_net *tn = nf_udp_pernet(net);
@@ -205,18 +206,6 @@ static void flow_offload_fixup_ct_timeout(struct nf_conn *ct)
 		WRITE_ONCE(ct->timeout, nfct_time_stamp + timeout);
 }
 
-static void flow_offload_fixup_ct_state(struct nf_conn *ct)
-{
-	if (nf_ct_protonum(ct) == IPPROTO_TCP)
-		flow_offload_fixup_tcp(&ct->proto.tcp);
-}
-
-static void flow_offload_fixup_ct(struct nf_conn *ct)
-{
-	flow_offload_fixup_ct_state(ct);
-	flow_offload_fixup_ct_timeout(ct);
-}
-
 static void flow_offload_route_release(struct flow_offload *flow)
 {
 	nft_flow_dst_release(flow, FLOW_OFFLOAD_DIR_ORIGINAL);
@@ -355,22 +344,14 @@ static void flow_offload_del(struct nf_flowtable *flow_table,
 	rhashtable_remove_fast(&flow_table->rhashtable,
 			       &flow->tuplehash[FLOW_OFFLOAD_DIR_REPLY].node,
 			       nf_flow_offload_rhash_params);
-
-	clear_bit(IPS_OFFLOAD_BIT, &flow->ct->status);
-
-	if (nf_flow_has_expired(flow))
-		flow_offload_fixup_ct(flow->ct);
-	else
-		flow_offload_fixup_ct_timeout(flow->ct);
-
 	flow_offload_free(flow);
 }
 
 void flow_offload_teardown(struct flow_offload *flow)
 {
+	clear_bit(IPS_OFFLOAD_BIT, &flow->ct->status);
 	set_bit(NF_FLOW_TEARDOWN, &flow->flags);
-
-	flow_offload_fixup_ct_state(flow->ct);
+	flow_offload_fixup_ct(flow->ct);
 }
 EXPORT_SYMBOL_GPL(flow_offload_teardown);
 
@@ -460,7 +441,7 @@ static void nf_flow_offload_gc_step(struct flow_offload *flow, void *data)
 	if (nf_flow_has_expired(flow) ||
 	    nf_ct_is_dying(flow->ct) ||
 	    nf_flow_has_stale_dst(flow))
-		set_bit(NF_FLOW_TEARDOWN, &flow->flags);
+		flow_offload_teardown(flow);
 
 	if (test_bit(NF_FLOW_TEARDOWN, &flow->flags)) {
 		if (test_bit(NF_FLOW_HW, &flow->flags)) {
diff --git a/net/netfilter/nft_flow_offload.c b/net/netfilter/nft_flow_offload.c
index 12145a80ef03..aac6db8680d4 100644
--- a/net/netfilter/nft_flow_offload.c
+++ b/net/netfilter/nft_flow_offload.c
@@ -298,7 +298,8 @@ static void nft_flow_offload_eval(const struct nft_expr *expr,
 	case IPPROTO_TCP:
 		tcph = skb_header_pointer(pkt->skb, nft_thoff(pkt),
 					  sizeof(_tcph), &_tcph);
-		if (unlikely(!tcph || tcph->fin || tcph->rst))
+		if (unlikely(!tcph || tcph->fin || tcph->rst ||
+			     !nf_conntrack_tcp_established(ct)))
 			goto out;
 		break;
 	case IPPROTO_UDP:
-- 
2.35.1

[PATCH 5.15 102/132] netfilter: flowtable: pass flowtable to nf_flow_table_iterate()

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 217cff36e885627c41a14e803fc44f9cbc945767 ]

The flowtable object is already passed as argument to
nf_flow_table_iterate(), do use not data pointer to pass flowtable.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_flow_table_core.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/net/netfilter/nf_flow_table_core.c b/net/netfilter/nf_flow_table_core.c
index 58f3f77b3eb2..de783c9094d7 100644
--- a/net/netfilter/nf_flow_table_core.c
+++ b/net/netfilter/nf_flow_table_core.c
@@ -382,7 +382,8 @@ EXPORT_SYMBOL_GPL(flow_offload_lookup);
 
 static int
 nf_flow_table_iterate(struct nf_flowtable *flow_table,
-		      void (*iter)(struct flow_offload *flow, void *data),
+		      void (*iter)(struct nf_flowtable *flowtable,
+				   struct flow_offload *flow, void *data),
 		      void *data)
 {
 	struct flow_offload_tuple_rhash *tuplehash;
@@ -406,7 +407,7 @@ nf_flow_table_iterate(struct nf_flowtable *flow_table,
 
 		flow = container_of(tuplehash, struct flow_offload, tuplehash[0]);
 
-		iter(flow, data);
+		iter(flow_table, flow, data);
 	}
 	rhashtable_walk_stop(&hti);
 	rhashtable_walk_exit(&hti);
@@ -434,10 +435,9 @@ static bool nf_flow_has_stale_dst(struct flow_offload *flow)
 	       flow_offload_stale_dst(&flow->tuplehash[FLOW_OFFLOAD_DIR_REPLY].tuple);
 }
 
-static void nf_flow_offload_gc_step(struct flow_offload *flow, void *data)
+static void nf_flow_offload_gc_step(struct nf_flowtable *flow_table,
+				    struct flow_offload *flow, void *data)
 {
-	struct nf_flowtable *flow_table = data;
-
 	if (nf_flow_has_expired(flow) ||
 	    nf_ct_is_dying(flow->ct) ||
 	    nf_flow_has_stale_dst(flow))
@@ -462,7 +462,7 @@ static void nf_flow_offload_work_gc(struct work_struct *work)
 	struct nf_flowtable *flow_table;
 
 	flow_table = container_of(work, struct nf_flowtable, gc_work.work);
-	nf_flow_table_iterate(flow_table, nf_flow_offload_gc_step, flow_table);
+	nf_flow_table_iterate(flow_table, nf_flow_offload_gc_step, NULL);
 	queue_delayed_work(system_power_efficient_wq, &flow_table->gc_work, HZ);
 }
 
@@ -578,7 +578,8 @@ int nf_flow_table_init(struct nf_flowtable *flowtable)
 }
 EXPORT_SYMBOL_GPL(nf_flow_table_init);
 
-static void nf_flow_table_do_cleanup(struct flow_offload *flow, void *data)
+static void nf_flow_table_do_cleanup(struct nf_flowtable *flow_table,
+				     struct flow_offload *flow, void *data)
 {
 	struct net_device *dev = data;
 
@@ -620,11 +621,10 @@ void nf_flow_table_free(struct nf_flowtable *flow_table)
 
 	cancel_delayed_work_sync(&flow_table->gc_work);
 	nf_flow_table_iterate(flow_table, nf_flow_table_do_cleanup, NULL);
-	nf_flow_table_iterate(flow_table, nf_flow_offload_gc_step, flow_table);
+	nf_flow_table_iterate(flow_table, nf_flow_offload_gc_step, NULL);
 	nf_flow_table_offload_flush(flow_table);
 	if (nf_flowtable_hw_offload(flow_table))
-		nf_flow_table_iterate(flow_table, nf_flow_offload_gc_step,
-				      flow_table);
+		nf_flow_table_iterate(flow_table, nf_flow_offload_gc_step, NULL);
 	rhashtable_destroy(&flow_table->rhashtable);
 }
 EXPORT_SYMBOL_GPL(nf_flow_table_free);
-- 
2.35.1

[PATCH 5.15 103/132] netfilter: flowtable: move dst_check to packet path

[Greg Kroah-Hartman]

From: Ritaro Takenaka <ritarot634@gmail.com>

[ Upstream commit 2738d9d963bd1f06d5114c2b4fa5771a95703991 ]

Fixes sporadic IPv6 packet loss when flow offloading is enabled.

IPv6 route GC and flowtable GC are not synchronized.
When dst_cache becomes stale and a packet passes through the flow before
the flowtable GC teardowns it, the packet can be dropped.
So, it is necessary to check dst every time in packet path.

Fixes: 227e1e4d0d6c ("netfilter: nf_flowtable: skip device lookup from interface index")
Signed-off-by: Ritaro Takenaka <ritarot634@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_flow_table_core.c | 23 +----------------------
 net/netfilter/nf_flow_table_ip.c   | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+), 22 deletions(-)

diff --git a/net/netfilter/nf_flow_table_core.c b/net/netfilter/nf_flow_table_core.c
index de783c9094d7..9fb407084c50 100644
--- a/net/netfilter/nf_flow_table_core.c
+++ b/net/netfilter/nf_flow_table_core.c
@@ -415,32 +415,11 @@ nf_flow_table_iterate(struct nf_flowtable *flow_table,
 	return err;
 }
 
-static bool flow_offload_stale_dst(struct flow_offload_tuple *tuple)
-{
-	struct dst_entry *dst;
-
-	if (tuple->xmit_type == FLOW_OFFLOAD_XMIT_NEIGH ||
-	    tuple->xmit_type == FLOW_OFFLOAD_XMIT_XFRM) {
-		dst = tuple->dst_cache;
-		if (!dst_check(dst, tuple->dst_cookie))
-			return true;
-	}
-
-	return false;
-}
-
-static bool nf_flow_has_stale_dst(struct flow_offload *flow)
-{
-	return flow_offload_stale_dst(&flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple) ||
-	       flow_offload_stale_dst(&flow->tuplehash[FLOW_OFFLOAD_DIR_REPLY].tuple);
-}
-
 static void nf_flow_offload_gc_step(struct nf_flowtable *flow_table,
 				    struct flow_offload *flow, void *data)
 {
 	if (nf_flow_has_expired(flow) ||
-	    nf_ct_is_dying(flow->ct) ||
-	    nf_flow_has_stale_dst(flow))
+	    nf_ct_is_dying(flow->ct))
 		flow_offload_teardown(flow);
 
 	if (test_bit(NF_FLOW_TEARDOWN, &flow->flags)) {
diff --git a/net/netfilter/nf_flow_table_ip.c b/net/netfilter/nf_flow_table_ip.c
index 6257d87c3a56..28026467b54c 100644
--- a/net/netfilter/nf_flow_table_ip.c
+++ b/net/netfilter/nf_flow_table_ip.c
@@ -227,6 +227,15 @@ static bool nf_flow_exceeds_mtu(const struct sk_buff *skb, unsigned int mtu)
 	return true;
 }
 
+static inline bool nf_flow_dst_check(struct flow_offload_tuple *tuple)
+{
+	if (tuple->xmit_type != FLOW_OFFLOAD_XMIT_NEIGH &&
+	    tuple->xmit_type != FLOW_OFFLOAD_XMIT_XFRM)
+		return true;
+
+	return dst_check(tuple->dst_cache, tuple->dst_cookie);
+}
+
 static unsigned int nf_flow_xmit_xfrm(struct sk_buff *skb,
 				      const struct nf_hook_state *state,
 				      struct dst_entry *dst)
@@ -346,6 +355,11 @@ nf_flow_offload_ip_hook(void *priv, struct sk_buff *skb,
 	if (nf_flow_state_check(flow, iph->protocol, skb, thoff))
 		return NF_ACCEPT;
 
+	if (!nf_flow_dst_check(&tuplehash->tuple)) {
+		flow_offload_teardown(flow);
+		return NF_ACCEPT;
+	}
+
 	if (skb_try_make_writable(skb, thoff + hdrsize))
 		return NF_DROP;
 
@@ -582,6 +596,11 @@ nf_flow_offload_ipv6_hook(void *priv, struct sk_buff *skb,
 	if (nf_flow_state_check(flow, ip6h->nexthdr, skb, thoff))
 		return NF_ACCEPT;
 
+	if (!nf_flow_dst_check(&tuplehash->tuple)) {
+		flow_offload_teardown(flow);
+		return NF_ACCEPT;
+	}
+
 	if (skb_try_make_writable(skb, thoff + hdrsize))
 		return NF_DROP;
 
-- 
2.35.1

[PATCH 5.15 104/132] net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.

[Greg Kroah-Hartman]

From: Andrew Lunn <andrew@lunn.ch>

[ Upstream commit fbb3abdf2223cd0dfc07de85fe5a43ba7f435bdf ]

It is possible to stack bridges on top of each other. Consider the
following which makes use of an Ethernet switch:

       br1
     /    \
    /      \
   /        \
 br0.11    wlan0
   |
   br0
 /  |  \
p1  p2  p3

br0 is offloaded to the switch. Above br0 is a vlan interface, for
vlan 11. This vlan interface is then a slave of br1. br1 also has a
wireless interface as a slave. This setup trunks wireless lan traffic
over the copper network inside a VLAN.

A frame received on p1 which is passed up to the bridge has the
skb->offload_fwd_mark flag set to true, indicating that the switch has
dealt with forwarding the frame out ports p2 and p3 as needed. This
flag instructs the software bridge it does not need to pass the frame
back down again. However, the flag is not getting reset when the frame
is passed upwards. As a result br1 sees the flag, wrongly interprets
it, and fails to forward the frame to wlan0.

When passing a frame upwards, clear the flag. This is the Rx
equivalent of br_switchdev_frame_unmark() in br_dev_xmit().

Fixes: f1c2eddf4cb6 ("bridge: switchdev: Use an helper to clear forward mark")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220518005840.771575-1-andrew@lunn.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bridge/br_input.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index b50382f957c1..6743c8a0fe8e 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -39,6 +39,13 @@ static int br_pass_frame_up(struct sk_buff *skb)
 	dev_sw_netstats_rx_add(brdev, skb->len);
 
 	vg = br_vlan_group_rcu(br);
+
+	/* Reset the offload_fwd_mark because there could be a stacked
+	 * bridge above, and it should not think this bridge it doing
+	 * that bridge's work forwarding out its ports.
+	 */
+	br_switchdev_frame_unmark(skb);
+
 	/* Bridge is just like any other port.  Make sure the
 	 * packet is allowed except in promisc mode when someone
 	 * may be running packet capture.
-- 
2.35.1

[PATCH 5.15 105/132] riscv: dts: sifive: fu540-c000: align dma node name with dtschema

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

[ Upstream commit b17410182b6f98191fbf7f42d3b4a78512769d29 ]

Fixes dtbs_check warnings like:

  dma@3000000: $nodename:0: 'dma@3000000' does not match '^dma-controller(@.*)?$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220407193856.18223-1-krzysztof.kozlowski@linaro.org
Fixes: c5ab54e9945b ("riscv: dts: add support for PDMA device of HiFive Unleashed Rev A00")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index 7db861053483..64c06c9b41dc 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -166,7 +166,7 @@ uart0: serial@10010000 {
 			clocks = <&prci PRCI_CLK_TLCLK>;
 			status = "disabled";
 		};
-		dma: dma@3000000 {
+		dma: dma-controller@3000000 {
 			compatible = "sifive,fu540-c000-pdma";
 			reg = <0x0 0x3000000 0x0 0x8000>;
 			interrupt-parent = <&plic0>;
-- 
2.35.1

[PATCH 5.15 106/132] scsi: ufs: core: Fix referencing invalid rsp field

[Greg Kroah-Hartman]

From: Daejun Park <daejun7.park@samsung.com>

[ Upstream commit d5d92b64408443e113b9742f8f1c35278910dd4d ]

Fix referencing sense data when it is invalid. When the length of the data
segment is 0, there is no valid information in the rsp field, so
ufshpb_rsp_upiu() is returned without additional operation.

Link: https://lore.kernel.org/r/252651381.41652940482659.JavaMail.epsvc@epcpadp4
Fixes: 4b5f49079c52 ("scsi: ufs: ufshpb: L2P map management for HPB read")
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshpb.c | 19 +++++++------------
 1 file changed, 7 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c
index f7eaf64293a4..14300896c57f 100644
--- a/drivers/scsi/ufs/ufshpb.c
+++ b/drivers/scsi/ufs/ufshpb.c
@@ -1257,6 +1257,13 @@ void ufshpb_rsp_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 	struct utp_hpb_rsp *rsp_field = &lrbp->ucd_rsp_ptr->hr;
 	int data_seg_len;
 
+	data_seg_len = be32_to_cpu(lrbp->ucd_rsp_ptr->header.dword_2)
+		& MASK_RSP_UPIU_DATA_SEG_LEN;
+
+	/* If data segment length is zero, rsp_field is not valid */
+	if (!data_seg_len)
+		return;
+
 	if (unlikely(lrbp->lun != rsp_field->lun)) {
 		struct scsi_device *sdev;
 		bool found = false;
@@ -1291,18 +1298,6 @@ void ufshpb_rsp_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 		return;
 	}
 
-	data_seg_len = be32_to_cpu(lrbp->ucd_rsp_ptr->header.dword_2)
-		& MASK_RSP_UPIU_DATA_SEG_LEN;
-
-	/* To flush remained rsp_list, we queue the map_work task */
-	if (!data_seg_len) {
-		if (!ufshpb_is_general_lun(hpb->lun))
-			return;
-
-		ufshpb_kick_map_work(hpb);
-		return;
-	}
-
 	BUILD_BUG_ON(sizeof(struct utp_hpb_rsp) != UTP_HPB_RSP_SIZE);
 
 	if (!ufshpb_is_hpb_rsp_valid(hba, lrbp, rsp_field))
-- 
2.35.1

[PATCH 5.15 107/132] perf build: Fix check for btf__load_from_kernel_by_id() in libbpf

[Greg Kroah-Hartman]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit 0ae065a5d265bc5ada13e350015458e0c5e5c351 ]

Avi Kivity reported a problem where the __weak
btf__load_from_kernel_by_id() in tools/perf/util/bpf-event.c was being
used and it called btf__get_from_id() in tools/lib/bpf/btf.c that in
turn called back to btf__load_from_kernel_by_id(), resulting in an
endless loop.

Fix this by adding a feature test to check if
btf__load_from_kernel_by_id() is available when building perf with
LIBBPF_DYNAMIC=1, and if not then provide the fallback to the old
btf__get_from_id(), that doesn't call back to btf__load_from_kernel_by_id()
since at that time it didn't exist at all.

Tested on Fedora 35 where we have libbpf-devel 0.4.0 with LIBBPF_DYNAMIC
where we don't have btf__load_from_kernel_by_id() and thus its feature
test fail, not defining HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID:

  $ cat /tmp/build/perf-urgent/feature/test-libbpf-btf__load_from_kernel_by_id.make.output
  test-libbpf-btf__load_from_kernel_by_id.c: In function ‘main’:
  test-libbpf-btf__load_from_kernel_by_id.c:6:16: error: implicit declaration of function ‘btf__load_from_kernel_by_id’ [-Werror=implicit-function-declaration]
      6 |         return btf__load_from_kernel_by_id(20151128, NULL);
        |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors
  $

  $ nm /tmp/build/perf-urgent/perf | grep btf__load_from_kernel_by_id
  00000000005ba180 T btf__load_from_kernel_by_id
  $

  $ objdump --disassemble=btf__load_from_kernel_by_id -S /tmp/build/perf-urgent/perf

  /tmp/build/perf-urgent/perf:     file format elf64-x86-64
  <SNIP>
  00000000005ba180 <btf__load_from_kernel_by_id>:
  #include "record.h"
  #include "util/synthetic-events.h"

  #ifndef HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
  struct btf *btf__load_from_kernel_by_id(__u32 id)
  {
    5ba180:	55                   	push   %rbp
    5ba181:	48 89 e5             	mov    %rsp,%rbp
    5ba184:	48 83 ec 10          	sub    $0x10,%rsp
    5ba188:	64 48 8b 04 25 28 00 	mov    %fs:0x28,%rax
    5ba18f:	00 00
    5ba191:	48 89 45 f8          	mov    %rax,-0x8(%rbp)
    5ba195:	31 c0                	xor    %eax,%eax
         struct btf *btf;
  #pragma GCC diagnostic push
  #pragma GCC diagnostic ignored "-Wdeprecated-declarations"
         int err = btf__get_from_id(id, &btf);
    5ba197:	48 8d 75 f0          	lea    -0x10(%rbp),%rsi
    5ba19b:	e8 a0 57 e5 ff       	call   40f940 <btf__get_from_id@plt>
    5ba1a0:	89 c2                	mov    %eax,%edx
  #pragma GCC diagnostic pop

         return err ? ERR_PTR(err) : btf;
    5ba1a2:	48 98                	cltq
    5ba1a4:	85 d2                	test   %edx,%edx
    5ba1a6:	48 0f 44 45 f0       	cmove  -0x10(%rbp),%rax
  }
  <SNIP>

Fixes: 218e7b775d368f38 ("perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions")
Reported-by: Avi Kivity <avi@scylladb.com>
Link: https://lore.kernel.org/linux-perf-users/f0add43b-3de5-20c5-22c4-70aff4af959f@scylladb.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/linux-perf-users/YobjjFOblY4Xvwo7@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/build/Makefile.feature                               | 1 +
 tools/build/feature/Makefile                               | 4 ++++
 .../feature/test-libbpf-btf__load_from_kernel_by_id.c      | 7 +++++++
 tools/perf/Makefile.config                                 | 7 +++++++
 tools/perf/util/bpf-event.c                                | 4 +++-
 5 files changed, 22 insertions(+), 1 deletion(-)
 create mode 100644 tools/build/feature/test-libbpf-btf__load_from_kernel_by_id.c

diff --git a/tools/build/Makefile.feature b/tools/build/Makefile.feature
index 88dd7db55d38..6abde487bba1 100644
--- a/tools/build/Makefile.feature
+++ b/tools/build/Makefile.feature
@@ -97,6 +97,7 @@ FEATURE_TESTS_EXTRA :=                  \
          llvm-version                   \
          clang                          \
          libbpf                         \
+         libbpf-btf__load_from_kernel_by_id \
          libpfm4                        \
          libdebuginfod			\
          clang-bpf-co-re
diff --git a/tools/build/feature/Makefile b/tools/build/feature/Makefile
index 0e6d685b8617..69a43d9ea331 100644
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -56,6 +56,7 @@ FILES=                                          \
          test-lzma.bin                          \
          test-bpf.bin                           \
          test-libbpf.bin                        \
+         test-libbpf-btf__load_from_kernel_by_id.bin	\
          test-get_cpuid.bin                     \
          test-sdt.bin                           \
          test-cxx.bin                           \
@@ -283,6 +284,9 @@ $(OUTPUT)test-bpf.bin:
 $(OUTPUT)test-libbpf.bin:
 	$(BUILD) -lbpf
 
+$(OUTPUT)test-libbpf-btf__load_from_kernel_by_id.bin:
+	$(BUILD) -lbpf
+
 $(OUTPUT)test-sdt.bin:
 	$(BUILD)
 
diff --git a/tools/build/feature/test-libbpf-btf__load_from_kernel_by_id.c b/tools/build/feature/test-libbpf-btf__load_from_kernel_by_id.c
new file mode 100644
index 000000000000..f7c084428735
--- /dev/null
+++ b/tools/build/feature/test-libbpf-btf__load_from_kernel_by_id.c
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <bpf/libbpf.h>
+
+int main(void)
+{
+	return btf__load_from_kernel_by_id(20151128, NULL);
+}
diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
index a92f0f025ec7..e0660bc76b7b 100644
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -548,9 +548,16 @@ ifndef NO_LIBELF
         ifeq ($(feature-libbpf), 1)
           EXTLIBS += -lbpf
           $(call detected,CONFIG_LIBBPF_DYNAMIC)
+
+          $(call feature_check,libbpf-btf__load_from_kernel_by_id)
+          ifeq ($(feature-libbpf-btf__load_from_kernel_by_id), 1)
+            CFLAGS += -DHAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
+          endif
         else
           dummy := $(error Error: No libbpf devel library found, please install libbpf-devel);
         endif
+      else
+	CFLAGS += -DHAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
       endif
     endif
 
diff --git a/tools/perf/util/bpf-event.c b/tools/perf/util/bpf-event.c
index 16ad0e6e9e9c..cf1b9f6ec0db 100644
--- a/tools/perf/util/bpf-event.c
+++ b/tools/perf/util/bpf-event.c
@@ -21,7 +21,8 @@
 #include "record.h"
 #include "util/synthetic-events.h"
 
-struct btf * __weak btf__load_from_kernel_by_id(__u32 id)
+#ifndef HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
+struct btf *btf__load_from_kernel_by_id(__u32 id)
 {
        struct btf *btf;
 #pragma GCC diagnostic push
@@ -31,6 +32,7 @@ struct btf * __weak btf__load_from_kernel_by_id(__u32 id)
 
        return err ? ERR_PTR(err) : btf;
 }
+#endif
 
 #define ptr_to_u64(ptr)    ((__u64)(unsigned long)(ptr))
 
-- 
2.35.1

[PATCH 5.15 108/132] gpio: gpio-vf610: do not touch other bits when set the target bit

[Greg Kroah-Hartman]

From: Haibo Chen <haibo.chen@nxp.com>

[ Upstream commit 9bf3ac466faa83d51a8fe9212131701e58fdef74 ]

For gpio controller contain register PDDR, when set one target bit,
current logic will clear all other bits, this is wrong. Use operator
'|=' to fix it.

Fixes: 659d8a62311f ("gpio: vf610: add imx7ulp support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-vf610.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index e0f2b67558e7..47e191e11c69 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -125,9 +125,13 @@ static int vf610_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
 {
 	struct vf610_gpio_port *port = gpiochip_get_data(chip);
 	unsigned long mask = BIT(gpio);
+	u32 val;
 
-	if (port->sdata && port->sdata->have_paddr)
-		vf610_gpio_writel(mask, port->gpio_base + GPIO_PDDR);
+	if (port->sdata && port->sdata->have_paddr) {
+		val = vf610_gpio_readl(port->gpio_base + GPIO_PDDR);
+		val |= mask;
+		vf610_gpio_writel(val, port->gpio_base + GPIO_PDDR);
+	}
 
 	vf610_gpio_set(chip, gpio, value);
 
-- 
2.35.1

[PATCH 5.15 109/132] gpio: mvebu/pwm: Refuse requests with inverted polarity

[Greg Kroah-Hartman]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 3ecb10175b1f776f076553c24e2689e42953fef5 ]

The driver doesn't take struct pwm_state::polarity into account when
configuring the hardware, so refuse requests for inverted polarity.

Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-mvebu.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index ad8822da7c27..1448dc874dfc 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -707,6 +707,9 @@ static int mvebu_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	unsigned long flags;
 	unsigned int on, off;
 
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
 	val = (unsigned long long) mvpwm->clk_rate * state->duty_cycle;
 	do_div(val, NSEC_PER_SEC);
 	if (val > UINT_MAX + 1ULL)
-- 
2.35.1

[PATCH 5.15 110/132] perf regs x86: Fix arch__intr_reg_mask() for the hybrid platform

[Greg Kroah-Hartman]

From: Kan Liang <kan.liang@linux.intel.com>

[ Upstream commit 01b28e4a58152e8906eeb5f1b55a0c404c48c7c8 ]

The X86 specific arch__intr_reg_mask() is to check whether the kernel
and hardware can collect XMM registers. But it doesn't work on some
hybrid platform.

Without the patch on ADL-N:

  $ perf record -I?
  available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
  R11 R12 R13 R14 R15

The config of the test event doesn't contain the PMU information. The
kernel may fail to initialize it on the correct hybrid PMU and return
the wrong non-supported information.

Add the PMU information into the config for the hybrid platform. The
same register set is supported among different hybrid PMUs. Checking
the first available one is good enough.

With the patch on ADL-N:

  $ perf record -I?
  available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
  R11 R12 R13 R14 R15 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 XMM9
  XMM10 XMM11 XMM12 XMM13 XMM14 XMM15

Fixes: 6466ec14aaf44ff1 ("perf regs x86: Add X86 specific arch__intr_reg_mask()")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518145125.1494156-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/arch/x86/util/perf_regs.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/tools/perf/arch/x86/util/perf_regs.c b/tools/perf/arch/x86/util/perf_regs.c
index 207c56805c55..0ed177991ad0 100644
--- a/tools/perf/arch/x86/util/perf_regs.c
+++ b/tools/perf/arch/x86/util/perf_regs.c
@@ -9,6 +9,8 @@
 #include "../../../util/perf_regs.h"
 #include "../../../util/debug.h"
 #include "../../../util/event.h"
+#include "../../../util/pmu.h"
+#include "../../../util/pmu-hybrid.h"
 
 const struct sample_reg sample_reg_masks[] = {
 	SMPL_REG(AX, PERF_REG_X86_AX),
@@ -284,12 +286,22 @@ uint64_t arch__intr_reg_mask(void)
 		.disabled 		= 1,
 		.exclude_kernel		= 1,
 	};
+	struct perf_pmu *pmu;
 	int fd;
 	/*
 	 * In an unnamed union, init it here to build on older gcc versions
 	 */
 	attr.sample_period = 1;
 
+	if (perf_pmu__has_hybrid()) {
+		/*
+		 * The same register set is supported among different hybrid PMUs.
+		 * Only check the first available one.
+		 */
+		pmu = list_first_entry(&perf_pmu__hybrid_pmus, typeof(*pmu), hybrid_list);
+		attr.config |= (__u64)pmu->type << PERF_PMU_TYPE_SHIFT;
+	}
+
 	event_attr_init(&attr);
 
 	fd = sys_perf_event_open(&attr, 0, -1, -1, 0);
-- 
2.35.1

[PATCH 5.15 111/132] perf bench numa: Address compiler error on s390

[Greg Kroah-Hartman]

From: Thomas Richter <tmricht@linux.ibm.com>

[ Upstream commit f8ac1c478424a9a14669b8cef7389b1e14e5229d ]

The compilation on s390 results in this error:

  # make DEBUG=y bench/numa.o
  ...
  bench/numa.c: In function ‘__bench_numa’:
  bench/numa.c:1749:81: error: ‘%d’ directive output may be truncated
              writing between 1 and 11 bytes into a region of size between
              10 and 20 [-Werror=format-truncation=]
  1749 |        snprintf(tname, sizeof(tname), "process%d:thread%d", p, t);
                                                               ^~
  ...
  bench/numa.c:1749:64: note: directive argument in the range
                 [-2147483647, 2147483646]
  ...
  #

The maximum length of the %d replacement is 11 characters because of the
negative sign.  Therefore extend the array by two more characters.

Output after:

  # make  DEBUG=y bench/numa.o > /dev/null 2>&1; ll bench/numa.o
  -rw-r--r-- 1 root root 418320 May 19 09:11 bench/numa.o
  #

Fixes: 3aff8ba0a4c9c919 ("perf bench numa: Avoid possible truncation when using snprintf()")
Suggested-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20220520081158.2990006-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/bench/numa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/bench/numa.c b/tools/perf/bench/numa.c
index f2640179ada9..c2c81567afa5 100644
--- a/tools/perf/bench/numa.c
+++ b/tools/perf/bench/numa.c
@@ -1672,7 +1672,7 @@ static int __bench_numa(const char *name)
 		"GB/sec,", "total-speed",	"GB/sec total speed");
 
 	if (g->p.show_details >= 2) {
-		char tname[14 + 2 * 10 + 1];
+		char tname[14 + 2 * 11 + 1];
 		struct thread_data *td;
 		for (p = 0; p < g->p.nr_proc; p++) {
 			for (t = 0; t < g->p.nr_threads; t++) {
-- 
2.35.1

[PATCH 5.15 112/132] scsi: scsi_dh_alua: Properly handle the ALUA transitioning state

[Greg Kroah-Hartman]

From: Brian Bunker <brian@purestorage.com>

[ Upstream commit 6056a92ceb2a7705d61df7ec5370548e96aee258 ]

The handling of the ALUA transitioning state is currently broken. When a
target goes into this state, it is expected that the target is allowed to
stay in this state for the implicit transition timeout without a path
failure. The handler has this logic, but it gets skipped currently.

When the target transitions, there is in-flight I/O from the initiator. The
first of these responses from the target will be a unit attention letting
the initiator know that the ALUA state has changed.  The remaining
in-flight I/Os, before the initiator finds out that the portal state has
changed, will return not ready, ALUA state is transitioning. The portal
state will change to SCSI_ACCESS_STATE_TRANSITIONING. This will lead to all
new I/O immediately failing the path unexpectedly. The path failure happens
in less than a second instead of the expected successes until the
transition timer is exceeded.

Allow I/Os to continue while the path is in the ALUA transitioning
state. The handler already takes care of a target that stays in the
transitioning state for too long by changing the state to ALUA state
standby once the transition timeout is exceeded at which point the path
will fail.

Link: https://lore.kernel.org/r/CAHZQxy+4sTPz9+pY3=7VJH+CLUJsDct81KtnR2be8ycN5mhqTg@mail.gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Krishna Kant <krishna.kant@purestorage.com>
Acked-by: Seamus Connor <sconnor@purestorage.com>
Signed-off-by: Brian Bunker <brian@purestorage.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/device_handler/scsi_dh_alua.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 37d06f993b76..1d9be771f3ee 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -1172,9 +1172,8 @@ static blk_status_t alua_prep_fn(struct scsi_device *sdev, struct request *req)
 	case SCSI_ACCESS_STATE_OPTIMAL:
 	case SCSI_ACCESS_STATE_ACTIVE:
 	case SCSI_ACCESS_STATE_LBA:
-		return BLK_STS_OK;
 	case SCSI_ACCESS_STATE_TRANSITIONING:
-		return BLK_STS_AGAIN;
+		return BLK_STS_OK;
 	default:
 		req->rq_flags |= RQF_QUIET;
 		return BLK_STS_IOERR;
-- 
2.35.1

[PATCH 5.15 113/132] scsi: qla2xxx: Fix missed DMA unmap for aborted commands

[Greg Kroah-Hartman]

From: Gleb Chesnokov <Chesnokov.G@raidix.com>

[ Upstream commit 26f9ce53817a8fd84b69a73473a7de852a24c897 ]

Aborting commands that have already been sent to the firmware can
cause BUG in qlt_free_cmd(): BUG_ON(cmd->sg_mapped)

For instance:

 - Command passes rdx_to_xfer state, maps sgl, sends to the firmware

 - Reset occurs, qla2xxx performs ISP error recovery, aborts the command

 - Target stack calls qlt_abort_cmd() and then qlt_free_cmd()

 - BUG_ON(cmd->sg_mapped) in qlt_free_cmd() occurs because sgl was not
   unmapped

Thus, unmap sgl in qlt_abort_cmd() for commands with the aborted flag set.

Link: https://lore.kernel.org/r/AS8PR10MB4952D545F84B6B1DFD39EC1E9DEE9@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COM
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_target.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index f5d32d830a9b..ae5eaa4a9283 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -3837,6 +3837,9 @@ int qlt_abort_cmd(struct qla_tgt_cmd *cmd)
 
 	spin_lock_irqsave(&cmd->cmd_lock, flags);
 	if (cmd->aborted) {
+		if (cmd->sg_mapped)
+			qlt_unmap_sg(vha, cmd);
+
 		spin_unlock_irqrestore(&cmd->cmd_lock, flags);
 		/*
 		 * It's normal to see 2 calls in this path:
-- 
2.35.1

[PATCH 5.15 114/132] mac80211: fix rx reordering with non explicit / psmp ack policy

[Greg Kroah-Hartman]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 5e469ed9764d4722c59562da13120bd2dc6834c5 ]

When the QoS ack policy was set to non explicit / psmp ack, frames are treated
as not being part of a BA session, which causes extra latency on reordering.
Fix this by only bypassing reordering for packets with no-ack policy

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220420105038.36443-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rx.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index eab6283b3479..743e97ba352c 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1400,8 +1400,7 @@ static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx,
 		goto dont_reorder;
 
 	/* not part of a BA session */
-	if (ack_policy != IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK &&
-	    ack_policy != IEEE80211_QOS_CTL_ACK_POLICY_NORMAL)
+	if (ack_policy == IEEE80211_QOS_CTL_ACK_POLICY_NOACK)
 		goto dont_reorder;
 
 	/* new, potentially un-ordered, ampdu frame - process it */
-- 
2.35.1

[PATCH 5.15 115/132] nl80211: validate S1G channel width

[Greg Kroah-Hartman]

From: Kieran Frewen <kieran.frewen@morsemicro.com>

[ Upstream commit 5d087aa759eb82b8208411913f6c2158bd85abc0 ]

Validate the S1G channel width input by user to ensure it matches
that of the requested channel

Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com>
Signed-off-by: Bassem Dawood <bassem@morsemicro.com>
Link: https://lore.kernel.org/r/20220420041321.3788789-2-kieran.frewen@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/nl80211.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index fe9cade6b4fb..9fae09e860e1 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3080,6 +3080,15 @@ int nl80211_parse_chandef(struct cfg80211_registered_device *rdev,
 	} else if (attrs[NL80211_ATTR_CHANNEL_WIDTH]) {
 		chandef->width =
 			nla_get_u32(attrs[NL80211_ATTR_CHANNEL_WIDTH]);
+		if (chandef->chan->band == NL80211_BAND_S1GHZ) {
+			/* User input error for channel width doesn't match channel  */
+			if (chandef->width != ieee80211_s1g_channel_width(chandef->chan)) {
+				NL_SET_ERR_MSG_ATTR(extack,
+						    attrs[NL80211_ATTR_CHANNEL_WIDTH],
+						    "bad channel width");
+				return -EINVAL;
+			}
+		}
 		if (attrs[NL80211_ATTR_CENTER_FREQ1]) {
 			chandef->center_freq1 =
 				nla_get_u32(attrs[NL80211_ATTR_CENTER_FREQ1]);
-- 
2.35.1

[PATCH 5.15 116/132] selftests: add ping test with ping_group_range tuned

[Greg Kroah-Hartman]

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>

[ Upstream commit e71b7f1f44d3d88c677769c85ef0171caf9fc89f ]

The 'ping' utility is able to manage two kind of sockets (raw or icmp),
depending on the sysctl ping_group_range. By default, ping_group_range is
set to '1 0', which forces ping to use an ip raw socket.

Let's replay the ping tests by allowing 'ping' to use the ip icmp socket.
After the previous patch, ipv4 tests results are the same with both kinds
of socket. For ipv6, there are a lot a new failures (the previous patch
fixes only two cases).

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/fcnal-test.sh | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh
index aec9e784d0b4..91f54112167f 100755
--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -803,10 +803,16 @@ ipv4_ping()
 	setup
 	set_sysctl net.ipv4.raw_l3mdev_accept=1 2>/dev/null
 	ipv4_ping_novrf
+	setup
+	set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null
+	ipv4_ping_novrf
 
 	log_subsection "With VRF"
 	setup "yes"
 	ipv4_ping_vrf
+	setup "yes"
+	set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null
+	ipv4_ping_vrf
 }
 
 ################################################################################
@@ -2324,10 +2330,16 @@ ipv6_ping()
 	log_subsection "No VRF"
 	setup
 	ipv6_ping_novrf
+	setup
+	set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null
+	ipv6_ping_novrf
 
 	log_subsection "With VRF"
 	setup "yes"
 	ipv6_ping_vrf
+	setup "yes"
+	set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null
+	ipv6_ping_vrf
 }
 
 ################################################################################
-- 
2.35.1

[PATCH 5.15 117/132] Revert "fbdev: Make fb_release() return -ENODEV if fbdev was unregistered"

[Greg Kroah-Hartman]

From: Javier Martinez Canillas <javierm@redhat.com>

[ Upstream commit 135332f34ba2662bc1e32b5c612e06a8cc41a053 ]

This reverts commit aafa025c76dcc7d1a8c8f0bdefcbe4eb480b2f6a. That commit
attempted to fix a NULL pointer dereference, caused by the struct fb_info
associated with a framebuffer device to not longer be valid when the file
descriptor was closed.

The issue was exposed by commit 27599aacbaef ("fbdev: Hot-unplug firmware
fb devices on forced removal"), which added a new path that goes through
the struct device removal instead of directly unregistering the fb.

Most fbdev drivers have issues with the fb_info lifetime, because call to
framebuffer_release() from their driver's .remove callback, rather than
doing from fbops.fb_destroy callback. This meant that due to this switch,
the fb_info was now destroyed too early, while references still existed,
while before it was simply leaked.

The patch we're reverting here reinstated that leak, hence "fixed" the
regression. But the proper solution is to fix the drivers to not release
the fb_info too soon.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504115917.758787-1-javierm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/core/fbmem.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index 8e38a7a5cf2f..0371ad233fdf 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -1436,10 +1436,7 @@ fb_release(struct inode *inode, struct file *file)
 __acquires(&info->lock)
 __releases(&info->lock)
 {
-	struct fb_info * const info = file_fb_info(file);
-
-	if (!info)
-		return -ENODEV;
+	struct fb_info * const info = file->private_data;
 
 	lock_fb_info(info);
 	if (info->fbops->fb_release)
-- 
2.35.1

[PATCH 5.15 118/132] fbdev: Prevent possible use-after-free in fb_release()

[Greg Kroah-Hartman]

From: Daniel Vetter <daniel.vetter@ffwll.ch>

[ Upstream commit 89bfd4017e58faaf70411555e7f508495114e90b ]

Most fbdev drivers have issues with the fb_info lifetime, because call to
framebuffer_release() from their driver's .remove callback, rather than
doing from fbops.fb_destroy callback.

Doing that will destroy the fb_info too early, while references to it may
still exist, leading to a use-after-free error.

To prevent this, check the fb_info reference counter when attempting to
kfree the data structure in framebuffer_release(). That will leak it but
at least will prevent the mentioned error.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220505220413.365977-1-javierm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/core/fbsysfs.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/video/fbdev/core/fbsysfs.c b/drivers/video/fbdev/core/fbsysfs.c
index 65dae05fff8e..ce699396d6ba 100644
--- a/drivers/video/fbdev/core/fbsysfs.c
+++ b/drivers/video/fbdev/core/fbsysfs.c
@@ -80,6 +80,10 @@ void framebuffer_release(struct fb_info *info)
 {
 	if (!info)
 		return;
+
+	if (WARN_ON(refcount_read(&info->count)))
+		return;
+
 	kfree(info->apertures);
 	kfree(info);
 }
-- 
2.35.1

[PATCH 5.15 119/132] net: fix wrong network header length

[Greg Kroah-Hartman]

From: Lina Wang <lina.wang@mediatek.com>

[ Upstream commit cf3ab8d4a797960b4be20565abb3bcd227b18a68 ]

When clatd starts with ebpf offloaing, and NETIF_F_GRO_FRAGLIST is enable,
several skbs are gathered in skb_shinfo(skb)->frag_list. The first skb's
ipv6 header will be changed to ipv4 after bpf_skb_proto_6_to_4,
network_header\transport_header\mac_header have been updated as ipv4 acts,
but other skbs in frag_list didnot update anything, just ipv6 packets.

udp_queue_rcv_skb will call skb_segment_list to traverse other skbs in
frag_list and make sure right udp payload is delivered to user space.
Unfortunately, other skbs in frag_list who are still ipv6 packets are
updated like the first skb and will have wrong transport header length.

e.g.before bpf_skb_proto_6_to_4,the first skb and other skbs in frag_list
has the same network_header(24)& transport_header(64), after
bpf_skb_proto_6_to_4, ipv6 protocol has been changed to ipv4, the first
skb's network_header is 44,transport_header is 64, other skbs in frag_list
didnot change.After skb_segment_list, the other skbs in frag_list has
different network_header(24) and transport_header(44), so there will be 20
bytes different from original,that is difference between ipv6 header and
ipv4 header. Just change transport_header to be the same with original.

Actually, there are two solutions to fix it, one is traversing all skbs
and changing every skb header in bpf_skb_proto_6_to_4, the other is
modifying frag_list skb's header in skb_segment_list. Considering
efficiency, adopt the second one--- when the first skb and other skbs in
frag_list has different network_header length, restore them to make sure
right udp payload is delivered to user space.

Signed-off-by: Lina Wang <lina.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skbuff.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index e4badc189e37..7ef0f5a8ab03 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -3873,7 +3873,7 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb,
 	unsigned int delta_len = 0;
 	struct sk_buff *tail = NULL;
 	struct sk_buff *nskb, *tmp;
-	int err;
+	int len_diff, err;
 
 	skb_push(skb, -skb_network_offset(skb) + offset);
 
@@ -3913,9 +3913,11 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb,
 		skb_push(nskb, -skb_network_offset(nskb) + offset);
 
 		skb_release_head_state(nskb);
+		len_diff = skb_network_header_len(nskb) - skb_network_header_len(skb);
 		__copy_skb_header(nskb, skb);
 
 		skb_headers_offset_update(nskb, skb_headroom(nskb) - skb_headroom(skb));
+		nskb->transport_header += len_diff;
 		skb_copy_from_linear_data_offset(skb, -tnl_hlen,
 						 nskb->data - tnl_hlen,
 						 offset + tnl_hlen);
-- 
2.35.1

[PATCH 5.15 120/132] nl80211: fix locking in nl80211_set_tx_bitrate_mask()

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit f971e1887fdb3ab500c9bebf4b98f62d49a20655 ]

This accesses the wdev's chandef etc., so cannot safely
be used without holding the lock.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20220506102136.06b7205419e6.I2a87c05fbd8bc5e565e84d190d4cfd2e92695a90@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/nl80211.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 9fae09e860e1..7c65ad17bf50 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -11341,18 +11341,23 @@ static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
 	struct cfg80211_bitrate_mask mask;
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
 	struct net_device *dev = info->user_ptr[1];
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	int err;
 
 	if (!rdev->ops->set_bitrate_mask)
 		return -EOPNOTSUPP;
 
+	wdev_lock(wdev);
 	err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
 					    NL80211_ATTR_TX_RATES, &mask,
 					    dev, true);
 	if (err)
-		return err;
+		goto out;
 
-	return rdev_set_bitrate_mask(rdev, dev, NULL, &mask);
+	err = rdev_set_bitrate_mask(rdev, dev, NULL, &mask);
+out:
+	wdev_unlock(wdev);
+	return err;
 }
 
 static int nl80211_register_mgmt(struct sk_buff *skb, struct genl_info *info)
-- 
2.35.1

[PATCH 5.15 121/132] ethernet: tulip: fix missing pci_disable_device() on error in tulip_init_one()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 51ca86b4c9c7c75f5630fa0dbe5f8f0bd98e3c3e ]

Fix the missing pci_disable_device() before return
from tulip_init_one() in the error handling case.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220506094250.3630615-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/dec/tulip/tulip_core.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/dec/tulip/tulip_core.c b/drivers/net/ethernet/dec/tulip/tulip_core.c
index fcedd733bacb..834a3f8c80da 100644
--- a/drivers/net/ethernet/dec/tulip/tulip_core.c
+++ b/drivers/net/ethernet/dec/tulip/tulip_core.c
@@ -1398,8 +1398,10 @@ static int tulip_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* alloc_etherdev ensures aligned and zeroed private structures */
 	dev = alloc_etherdev (sizeof (*tp));
-	if (!dev)
+	if (!dev) {
+		pci_disable_device(pdev);
 		return -ENOMEM;
+	}
 
 	SET_NETDEV_DEV(dev, &pdev->dev);
 	if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) {
@@ -1778,6 +1780,7 @@ static int tulip_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 err_out_free_netdev:
 	free_netdev (dev);
+	pci_disable_device(pdev);
 	return -ENODEV;
 }
 
-- 
2.35.1

[PATCH 5.15 122/132] net: stmmac: fix missing pci_disable_device() on error in stmmac_pci_probe()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 0807ce0b010418a191e0e4009803b2d74c3245d5 ]

Switch to using pcim_enable_device() to avoid missing pci_disable_device().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220510031316.1780409-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index fcf17d8a0494..644bb54f5f02 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -181,7 +181,7 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
 		return -ENOMEM;
 
 	/* Enable pci device */
-	ret = pci_enable_device(pdev);
+	ret = pcim_enable_device(pdev);
 	if (ret) {
 		dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n",
 			__func__);
@@ -241,8 +241,6 @@ static void stmmac_pci_remove(struct pci_dev *pdev)
 		pcim_iounmap_regions(pdev, BIT(i));
 		break;
 	}
-
-	pci_disable_device(pdev);
 }
 
 static int __maybe_unused stmmac_pci_suspend(struct device *dev)
-- 
2.35.1

[PATCH 5.15 123/132] net: atlantic: fix "frag[0] not initialized"

[Greg Kroah-Hartman]

From: Grant Grundler <grundler@chromium.org>

[ Upstream commit 62e0ae0f4020250f961cf8d0103a4621be74e077 ]

In aq_ring_rx_clean(), if buff->is_eop is not set AND
buff->len < AQ_CFG_RX_HDR_SIZE, then hdr_len remains equal to
buff->len and skb_add_rx_frag(xxx, *0*, ...) is not called.

The loop following this code starts calling skb_add_rx_frag() starting
with i=1 and thus frag[0] is never initialized. Since i is initialized
to zero at the top of the primary loop, we can just reference and
post-increment i instead of hardcoding the 0 when calling
skb_add_rx_frag() the first time.

Reported-by: Aashay Shringarpure <aashay@google.com>
Reported-by: Yi Chou <yich@google.com>
Reported-by: Shervin Oloumi <enlightened@google.com>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_ring.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
index 72f8751784c3..7cf5a48e9a7d 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
@@ -445,7 +445,7 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
 		       ALIGN(hdr_len, sizeof(long)));
 
 		if (buff->len - hdr_len > 0) {
-			skb_add_rx_frag(skb, 0, buff->rxdata.page,
+			skb_add_rx_frag(skb, i++, buff->rxdata.page,
 					buff->rxdata.pg_off + hdr_len,
 					buff->len - hdr_len,
 					AQ_CFG_RX_FRAME_MAX);
@@ -454,7 +454,6 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
 
 		if (!buff->is_eop) {
 			buff_ = buff;
-			i = 1U;
 			do {
 				next_ = buff_->next;
 				buff_ = &self->buff_ring[next_];
-- 
2.35.1

[PATCH 5.15 124/132] net: atlantic: reduce scope of is_rsc_complete

[Greg Kroah-Hartman]

From: Grant Grundler <grundler@chromium.org>

[ Upstream commit 79784d77ebbd3ec516b7a5ce555d979fb7946202 ]

Don't defer handling the err case outside the loop. That's pointless.

And since is_rsc_complete is only used inside this loop, declare
it inside the loop to reduce it's scope.

Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_ring.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
index 7cf5a48e9a7d..339efdfb1d49 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
@@ -345,7 +345,6 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
 		     int budget)
 {
 	struct net_device *ndev = aq_nic_get_ndev(self->aq_nic);
-	bool is_rsc_completed = true;
 	int err = 0;
 
 	for (; (self->sw_head != self->hw_head) && budget;
@@ -365,6 +364,8 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
 		if (!buff->is_eop) {
 			buff_ = buff;
 			do {
+				bool is_rsc_completed = true;
+
 				if (buff_->next >= self->size) {
 					err = -EIO;
 					goto err_exit;
@@ -376,18 +377,16 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
 							    next_,
 							    self->hw_head);
 
-				if (unlikely(!is_rsc_completed))
-					break;
+				if (unlikely(!is_rsc_completed)) {
+					err = 0;
+					goto err_exit;
+				}
 
 				buff->is_error |= buff_->is_error;
 				buff->is_cso_err |= buff_->is_cso_err;
 
 			} while (!buff_->is_eop);
 
-			if (!is_rsc_completed) {
-				err = 0;
-				goto err_exit;
-			}
 			if (buff->is_error ||
 			    (buff->is_lro && buff->is_cso_err)) {
 				buff_ = buff;
-- 
2.35.1

[PATCH 5.15 125/132] net: atlantic: add check for MAX_SKB_FRAGS

[Greg Kroah-Hartman]

From: Grant Grundler <grundler@chromium.org>

[ Upstream commit 6aecbba12b5c90b26dc062af3b9de8c4b3a2f19f ]

Enforce that the CPU can not get stuck in an infinite loop.

Reported-by: Aashay Shringarpure <aashay@google.com>
Reported-by: Yi Chou <yich@google.com>
Reported-by: Shervin Oloumi <enlightened@google.com>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_ring.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
index 339efdfb1d49..e9c6f1fa0b1a 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_ring.c
@@ -362,6 +362,7 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
 			continue;
 
 		if (!buff->is_eop) {
+			unsigned int frag_cnt = 0U;
 			buff_ = buff;
 			do {
 				bool is_rsc_completed = true;
@@ -370,6 +371,8 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
 					err = -EIO;
 					goto err_exit;
 				}
+
+				frag_cnt++;
 				next_ = buff_->next,
 				buff_ = &self->buff_ring[next_];
 				is_rsc_completed =
@@ -377,7 +380,8 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
 							    next_,
 							    self->hw_head);
 
-				if (unlikely(!is_rsc_completed)) {
+				if (unlikely(!is_rsc_completed) ||
+						frag_cnt > MAX_SKB_FRAGS) {
 					err = 0;
 					goto err_exit;
 				}
-- 
2.35.1

[PATCH 5.15 126/132] net: atlantic: verify hw_head_ lies within TX buffer ring

[Greg Kroah-Hartman]

From: Grant Grundler <grundler@chromium.org>

[ Upstream commit 2120b7f4d128433ad8c5f503a9584deba0684901 ]

Bounds check hw_head index provided by NIC to verify it lies
within the TX buffer ring.

Reported-by: Aashay Shringarpure <aashay@google.com>
Reported-by: Yi Chou <yich@google.com>
Reported-by: Shervin Oloumi <enlightened@google.com>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
index 9f1b15077e7d..45c17c585d74 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c
@@ -889,6 +889,13 @@ int hw_atl_b0_hw_ring_tx_head_update(struct aq_hw_s *self,
 		err = -ENXIO;
 		goto err_exit;
 	}
+
+	/* Validate that the new hw_head_ is reasonable. */
+	if (hw_head_ >= ring->size) {
+		err = -ENXIO;
+		goto err_exit;
+	}
+
 	ring->hw_head = hw_head_;
 	err = aq_hw_err_from_flags(self);
 
-- 
2.35.1

[PATCH 5.15 127/132] arm64: Enable repeat tlbi workaround on KRYO4XX gold CPUs

[Greg Kroah-Hartman]

From: Shreyas K K <quic_shrekk@quicinc.com>

[ Upstream commit 51f559d66527e238f9a5f82027bff499784d4eac ]

Add KRYO4XX gold/big cores to the list of CPUs that need the
repeat TLBI workaround. Apply this to the affected
KRYO4XX cores (rcpe to rfpe).

The variant and revision bits are implementation defined and are
different from the their Cortex CPU counterparts on which they are
based on, i.e., (r0p0 to r3p0) is equivalent to (rcpe to rfpe).

Signed-off-by: Shreyas K K <quic_shrekk@quicinc.com>
Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Link: https://lore.kernel.org/r/20220512110134.12179-1-quic_shrekk@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/arm64/silicon-errata.rst | 3 +++
 arch/arm64/kernel/cpu_errata.c         | 2 ++
 2 files changed, 5 insertions(+)

diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index d410a47ffa57..7c1750bcc5bd 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -163,6 +163,9 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1024718       |
 +----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1286807       |
++----------------+-----------------+-----------------+-----------------------------+
+
 +----------------+-----------------+-----------------+-----------------------------+
 | Fujitsu        | A64FX           | E#010001        | FUJITSU_ERRATUM_010001      |
 +----------------+-----------------+-----------------+-----------------------------+
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index a33d7b8f3b93..c67c19d70159 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -208,6 +208,8 @@ static const struct arm64_cpu_capabilities arm64_repeat_tlbi_list[] = {
 #ifdef CONFIG_ARM64_ERRATUM_1286807
 	{
 		ERRATA_MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 0),
+		/* Kryo4xx Gold (rcpe to rfpe) => (r0p0 to r3p0) */
+		ERRATA_MIDR_RANGE(MIDR_QCOM_KRYO_4XX_GOLD, 0xc, 0xe, 0xf, 0xe),
 	},
 #endif
 	{},
-- 
2.35.1

[PATCH 5.15 128/132] Input: ili210x - fix reset timing

[Greg Kroah-Hartman]

From: Marek Vasut <marex@denx.de>

commit e4920d42ce0e9c8aafb7f64b6d9d4ae02161e51e upstream.

According to Ilitek "231x & ILI251x Programming Guide" Version: 2.30
"2.1. Power Sequence", "T4 Chip Reset and discharge time" is minimum
10ms and "T2 Chip initial time" is maximum 150ms. Adjust the reset
timings such that T4 is 12ms and T2 is 160ms to fit those figures.

This prevents sporadic touch controller start up failures when some
systems with at least ILI251x controller boot, without this patch
the systems sometimes fail to communicate with the touch controller.

Fixes: 201f3c803544c ("Input: ili210x - add reset GPIO support")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220518204901.93534-1-marex@denx.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/touchscreen/ili210x.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/input/touchscreen/ili210x.c
+++ b/drivers/input/touchscreen/ili210x.c
@@ -420,9 +420,9 @@ static int ili210x_i2c_probe(struct i2c_
 		if (error)
 			return error;
 
-		usleep_range(50, 100);
+		usleep_range(12000, 15000);
 		gpiod_set_value_cansleep(reset_gpio, 0);
-		msleep(100);
+		msleep(160);
 	}
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);

[PATCH 5.15 129/132] dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group

[Greg Kroah-Hartman]

From: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>

commit a29c96a4053dc3c1d39353b61089882f81c6b23d upstream.

FWQSPID is not a group of FWSPID so remove it.

Fixes: 7488838f2315 ("dt-bindings: pinctrl: aspeed: Document AST2600 pinmux")
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220329173932.2588289-4-quic_jaehyoo@quicinc.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -58,7 +58,7 @@ patternProperties:
           $ref: "/schemas/types.yaml#/definitions/string"
           enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
                   ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
-                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
+                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP,
                   GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
                   GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
                   I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,

[PATCH 5.15 130/132] mt76: mt7921e: fix possible probe failure after reboot

[Greg Kroah-Hartman]

From: Sean Wang <sean.wang@mediatek.com>

commit 602cc0c9618a819ab00ea3c9400742a0ca318380 upstream.

It doesn't guarantee the mt7921e gets started with ASPM L0 after each
machine reboot on every platform.

If mt7921e gets started with not ASPM L0, it would be possible that the
driver encounters time to time failure in mt7921_pci_probe, like a
weird chip identifier is read

[  215.514503] mt7921e 0000:05:00.0: ASIC revision: feed0000
[  216.604741] mt7921e: probe of 0000:05:00.0 failed with error -110

or failing to init hardware because the driver is not allowed to access the
register until the device is in ASPM L0 state. So, we call
__mt7921e_mcu_drv_pmctrl in early mt7921_pci_probe to force the device
to bring back to the L0 state for we can safely access registers in any
case.

In the patch, we move all functions from dma.c to pci.c and register mt76
bus operation earilier, that is the __mt7921e_mcu_drv_pmctrl depends on.

Fixes: bf3747ae2e25 ("mt76: mt7921: enable aspm by default")
Reported-by: Kai-Chuan Hsieh <kaichuan.hsieh@canonical.com>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/mediatek/mt76/mt7921/dma.c |  115 ----------------------
 drivers/net/wireless/mediatek/mt76/mt7921/mcu.c |   20 +--
 drivers/net/wireless/mediatek/mt76/mt7921/pci.c |  121 ++++++++++++++++++++++++
 3 files changed, 131 insertions(+), 125 deletions(-)

--- a/drivers/net/wireless/mediatek/mt76/mt7921/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/dma.c
@@ -118,109 +118,6 @@ static void mt7921_dma_prefetch(struct m
 	mt76_wr(dev, MT_WFDMA0_TX_RING17_EXT_CTRL, PREFETCH(0x380, 0x4));
 }
 
-static u32 __mt7921_reg_addr(struct mt7921_dev *dev, u32 addr)
-{
-	static const struct {
-		u32 phys;
-		u32 mapped;
-		u32 size;
-	} fixed_map[] = {
-		{ 0x00400000, 0x80000, 0x10000}, /* WF_MCU_SYSRAM */
-		{ 0x00410000, 0x90000, 0x10000}, /* WF_MCU_SYSRAM (configure register) */
-		{ 0x40000000, 0x70000, 0x10000}, /* WF_UMAC_SYSRAM */
-		{ 0x54000000, 0x02000, 0x1000 }, /* WFDMA PCIE0 MCU DMA0 */
-		{ 0x55000000, 0x03000, 0x1000 }, /* WFDMA PCIE0 MCU DMA1 */
-		{ 0x58000000, 0x06000, 0x1000 }, /* WFDMA PCIE1 MCU DMA0 (MEM_DMA) */
-		{ 0x59000000, 0x07000, 0x1000 }, /* WFDMA PCIE1 MCU DMA1 */
-		{ 0x7c000000, 0xf0000, 0x10000 }, /* CONN_INFRA */
-		{ 0x7c020000, 0xd0000, 0x10000 }, /* CONN_INFRA, WFDMA */
-		{ 0x7c060000, 0xe0000, 0x10000}, /* CONN_INFRA, conn_host_csr_top */
-		{ 0x80020000, 0xb0000, 0x10000 }, /* WF_TOP_MISC_OFF */
-		{ 0x81020000, 0xc0000, 0x10000 }, /* WF_TOP_MISC_ON */
-		{ 0x820c0000, 0x08000, 0x4000 }, /* WF_UMAC_TOP (PLE) */
-		{ 0x820c8000, 0x0c000, 0x2000 }, /* WF_UMAC_TOP (PSE) */
-		{ 0x820cc000, 0x0e000, 0x2000 }, /* WF_UMAC_TOP (PP) */
-		{ 0x820ce000, 0x21c00, 0x0200 }, /* WF_LMAC_TOP (WF_SEC) */
-		{ 0x820cf000, 0x22000, 0x1000 }, /* WF_LMAC_TOP (WF_PF) */
-		{ 0x820d0000, 0x30000, 0x10000 }, /* WF_LMAC_TOP (WF_WTBLON) */
-		{ 0x820e0000, 0x20000, 0x0400 }, /* WF_LMAC_TOP BN0 (WF_CFG) */
-		{ 0x820e1000, 0x20400, 0x0200 }, /* WF_LMAC_TOP BN0 (WF_TRB) */
-		{ 0x820e2000, 0x20800, 0x0400 }, /* WF_LMAC_TOP BN0 (WF_AGG) */
-		{ 0x820e3000, 0x20c00, 0x0400 }, /* WF_LMAC_TOP BN0 (WF_ARB) */
-		{ 0x820e4000, 0x21000, 0x0400 }, /* WF_LMAC_TOP BN0 (WF_TMAC) */
-		{ 0x820e5000, 0x21400, 0x0800 }, /* WF_LMAC_TOP BN0 (WF_RMAC) */
-		{ 0x820e7000, 0x21e00, 0x0200 }, /* WF_LMAC_TOP BN0 (WF_DMA) */
-		{ 0x820e9000, 0x23400, 0x0200 }, /* WF_LMAC_TOP BN0 (WF_WTBLOFF) */
-		{ 0x820ea000, 0x24000, 0x0200 }, /* WF_LMAC_TOP BN0 (WF_ETBF) */
-		{ 0x820eb000, 0x24200, 0x0400 }, /* WF_LMAC_TOP BN0 (WF_LPON) */
-		{ 0x820ec000, 0x24600, 0x0200 }, /* WF_LMAC_TOP BN0 (WF_INT) */
-		{ 0x820ed000, 0x24800, 0x0800 }, /* WF_LMAC_TOP BN0 (WF_MIB) */
-		{ 0x820f0000, 0xa0000, 0x0400 }, /* WF_LMAC_TOP BN1 (WF_CFG) */
-		{ 0x820f1000, 0xa0600, 0x0200 }, /* WF_LMAC_TOP BN1 (WF_TRB) */
-		{ 0x820f2000, 0xa0800, 0x0400 }, /* WF_LMAC_TOP BN1 (WF_AGG) */
-		{ 0x820f3000, 0xa0c00, 0x0400 }, /* WF_LMAC_TOP BN1 (WF_ARB) */
-		{ 0x820f4000, 0xa1000, 0x0400 }, /* WF_LMAC_TOP BN1 (WF_TMAC) */
-		{ 0x820f5000, 0xa1400, 0x0800 }, /* WF_LMAC_TOP BN1 (WF_RMAC) */
-		{ 0x820f7000, 0xa1e00, 0x0200 }, /* WF_LMAC_TOP BN1 (WF_DMA) */
-		{ 0x820f9000, 0xa3400, 0x0200 }, /* WF_LMAC_TOP BN1 (WF_WTBLOFF) */
-		{ 0x820fa000, 0xa4000, 0x0200 }, /* WF_LMAC_TOP BN1 (WF_ETBF) */
-		{ 0x820fb000, 0xa4200, 0x0400 }, /* WF_LMAC_TOP BN1 (WF_LPON) */
-		{ 0x820fc000, 0xa4600, 0x0200 }, /* WF_LMAC_TOP BN1 (WF_INT) */
-		{ 0x820fd000, 0xa4800, 0x0800 }, /* WF_LMAC_TOP BN1 (WF_MIB) */
-	};
-	int i;
-
-	if (addr < 0x100000)
-		return addr;
-
-	for (i = 0; i < ARRAY_SIZE(fixed_map); i++) {
-		u32 ofs;
-
-		if (addr < fixed_map[i].phys)
-			continue;
-
-		ofs = addr - fixed_map[i].phys;
-		if (ofs > fixed_map[i].size)
-			continue;
-
-		return fixed_map[i].mapped + ofs;
-	}
-
-	if ((addr >= 0x18000000 && addr < 0x18c00000) ||
-	    (addr >= 0x70000000 && addr < 0x78000000) ||
-	    (addr >= 0x7c000000 && addr < 0x7c400000))
-		return mt7921_reg_map_l1(dev, addr);
-
-	dev_err(dev->mt76.dev, "Access currently unsupported address %08x\n",
-		addr);
-
-	return 0;
-}
-
-static u32 mt7921_rr(struct mt76_dev *mdev, u32 offset)
-{
-	struct mt7921_dev *dev = container_of(mdev, struct mt7921_dev, mt76);
-	u32 addr = __mt7921_reg_addr(dev, offset);
-
-	return dev->bus_ops->rr(mdev, addr);
-}
-
-static void mt7921_wr(struct mt76_dev *mdev, u32 offset, u32 val)
-{
-	struct mt7921_dev *dev = container_of(mdev, struct mt7921_dev, mt76);
-	u32 addr = __mt7921_reg_addr(dev, offset);
-
-	dev->bus_ops->wr(mdev, addr, val);
-}
-
-static u32 mt7921_rmw(struct mt76_dev *mdev, u32 offset, u32 mask, u32 val)
-{
-	struct mt7921_dev *dev = container_of(mdev, struct mt7921_dev, mt76);
-	u32 addr = __mt7921_reg_addr(dev, offset);
-
-	return dev->bus_ops->rmw(mdev, addr, mask, val);
-}
-
 static int mt7921_dma_disable(struct mt7921_dev *dev, bool force)
 {
 	if (force) {
@@ -380,20 +277,8 @@ int mt7921_wpdma_reinit_cond(struct mt79
 
 int mt7921_dma_init(struct mt7921_dev *dev)
 {
-	struct mt76_bus_ops *bus_ops;
 	int ret;
 
-	dev->bus_ops = dev->mt76.bus;
-	bus_ops = devm_kmemdup(dev->mt76.dev, dev->bus_ops, sizeof(*bus_ops),
-			       GFP_KERNEL);
-	if (!bus_ops)
-		return -ENOMEM;
-
-	bus_ops->rr = mt7921_rr;
-	bus_ops->wr = mt7921_wr;
-	bus_ops->rmw = mt7921_rmw;
-	dev->mt76.bus = bus_ops;
-
 	mt76_dma_attach(&dev->mt76);
 
 	ret = mt7921_dma_disable(dev, true);
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
@@ -1306,8 +1306,6 @@ int mt7921_mcu_sta_update(struct mt7921_
 
 int __mt7921_mcu_drv_pmctrl(struct mt7921_dev *dev)
 {
-	struct mt76_phy *mphy = &dev->mt76.phy;
-	struct mt76_connac_pm *pm = &dev->pm;
 	int i, err = 0;
 
 	for (i = 0; i < MT7921_DRV_OWN_RETRY_COUNT; i++) {
@@ -1320,16 +1318,8 @@ int __mt7921_mcu_drv_pmctrl(struct mt792
 	if (i == MT7921_DRV_OWN_RETRY_COUNT) {
 		dev_err(dev->mt76.dev, "driver own failed\n");
 		err = -EIO;
-		goto out;
 	}
 
-	mt7921_wpdma_reinit_cond(dev);
-	clear_bit(MT76_STATE_PM, &mphy->state);
-
-	pm->stats.last_wake_event = jiffies;
-	pm->stats.doze_time += pm->stats.last_wake_event -
-			       pm->stats.last_doze_event;
-out:
 	return err;
 }
 
@@ -1345,6 +1335,16 @@ int mt7921_mcu_drv_pmctrl(struct mt7921_
 		goto out;
 
 	err = __mt7921_mcu_drv_pmctrl(dev);
+        if (err < 0)
+            goto out;
+
+	mt7921_wpdma_reinit_cond(dev);
+	clear_bit(MT76_STATE_PM, &mphy->state);
+
+	pm->stats.last_wake_event = jiffies;
+	pm->stats.doze_time += pm->stats.last_wake_event -
+			       pm->stats.last_doze_event;
+
 out:
 	mutex_unlock(&pm->mutex);
 
--- a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
@@ -88,6 +88,110 @@ static void mt7921_irq_tasklet(unsigned
 		napi_schedule(&dev->mt76.napi[MT_RXQ_MAIN]);
 }
 
+static u32 __mt7921_reg_addr(struct mt7921_dev *dev, u32 addr)
+{
+	static const struct {
+		u32 phys;
+		u32 mapped;
+		u32 size;
+	} fixed_map[] = {
+		{ 0x00400000, 0x80000, 0x10000}, /* WF_MCU_SYSRAM */
+		{ 0x00410000, 0x90000, 0x10000}, /* WF_MCU_SYSRAM (configure register) */
+		{ 0x40000000, 0x70000, 0x10000}, /* WF_UMAC_SYSRAM */
+		{ 0x54000000, 0x02000, 0x1000 }, /* WFDMA PCIE0 MCU DMA0 */
+		{ 0x55000000, 0x03000, 0x1000 }, /* WFDMA PCIE0 MCU DMA1 */
+		{ 0x58000000, 0x06000, 0x1000 }, /* WFDMA PCIE1 MCU DMA0 (MEM_DMA) */
+		{ 0x59000000, 0x07000, 0x1000 }, /* WFDMA PCIE1 MCU DMA1 */
+		{ 0x7c000000, 0xf0000, 0x10000 }, /* CONN_INFRA */
+		{ 0x7c020000, 0xd0000, 0x10000 }, /* CONN_INFRA, WFDMA */
+		{ 0x7c060000, 0xe0000, 0x10000}, /* CONN_INFRA, conn_host_csr_top */
+		{ 0x80020000, 0xb0000, 0x10000 }, /* WF_TOP_MISC_OFF */
+		{ 0x81020000, 0xc0000, 0x10000 }, /* WF_TOP_MISC_ON */
+		{ 0x820c0000, 0x08000, 0x4000 }, /* WF_UMAC_TOP (PLE) */
+		{ 0x820c8000, 0x0c000, 0x2000 }, /* WF_UMAC_TOP (PSE) */
+		{ 0x820cc000, 0x0e000, 0x2000 }, /* WF_UMAC_TOP (PP) */
+		{ 0x820ce000, 0x21c00, 0x0200 }, /* WF_LMAC_TOP (WF_SEC) */
+		{ 0x820cf000, 0x22000, 0x1000 }, /* WF_LMAC_TOP (WF_PF) */
+		{ 0x820d0000, 0x30000, 0x10000 }, /* WF_LMAC_TOP (WF_WTBLON) */
+		{ 0x820e0000, 0x20000, 0x0400 }, /* WF_LMAC_TOP BN0 (WF_CFG) */
+		{ 0x820e1000, 0x20400, 0x0200 }, /* WF_LMAC_TOP BN0 (WF_TRB) */
+		{ 0x820e2000, 0x20800, 0x0400 }, /* WF_LMAC_TOP BN0 (WF_AGG) */
+		{ 0x820e3000, 0x20c00, 0x0400 }, /* WF_LMAC_TOP BN0 (WF_ARB) */
+		{ 0x820e4000, 0x21000, 0x0400 }, /* WF_LMAC_TOP BN0 (WF_TMAC) */
+		{ 0x820e5000, 0x21400, 0x0800 }, /* WF_LMAC_TOP BN0 (WF_RMAC) */
+		{ 0x820e7000, 0x21e00, 0x0200 }, /* WF_LMAC_TOP BN0 (WF_DMA) */
+		{ 0x820e9000, 0x23400, 0x0200 }, /* WF_LMAC_TOP BN0 (WF_WTBLOFF) */
+		{ 0x820ea000, 0x24000, 0x0200 }, /* WF_LMAC_TOP BN0 (WF_ETBF) */
+		{ 0x820eb000, 0x24200, 0x0400 }, /* WF_LMAC_TOP BN0 (WF_LPON) */
+		{ 0x820ec000, 0x24600, 0x0200 }, /* WF_LMAC_TOP BN0 (WF_INT) */
+		{ 0x820ed000, 0x24800, 0x0800 }, /* WF_LMAC_TOP BN0 (WF_MIB) */
+		{ 0x820f0000, 0xa0000, 0x0400 }, /* WF_LMAC_TOP BN1 (WF_CFG) */
+		{ 0x820f1000, 0xa0600, 0x0200 }, /* WF_LMAC_TOP BN1 (WF_TRB) */
+		{ 0x820f2000, 0xa0800, 0x0400 }, /* WF_LMAC_TOP BN1 (WF_AGG) */
+		{ 0x820f3000, 0xa0c00, 0x0400 }, /* WF_LMAC_TOP BN1 (WF_ARB) */
+		{ 0x820f4000, 0xa1000, 0x0400 }, /* WF_LMAC_TOP BN1 (WF_TMAC) */
+		{ 0x820f5000, 0xa1400, 0x0800 }, /* WF_LMAC_TOP BN1 (WF_RMAC) */
+		{ 0x820f7000, 0xa1e00, 0x0200 }, /* WF_LMAC_TOP BN1 (WF_DMA) */
+		{ 0x820f9000, 0xa3400, 0x0200 }, /* WF_LMAC_TOP BN1 (WF_WTBLOFF) */
+		{ 0x820fa000, 0xa4000, 0x0200 }, /* WF_LMAC_TOP BN1 (WF_ETBF) */
+		{ 0x820fb000, 0xa4200, 0x0400 }, /* WF_LMAC_TOP BN1 (WF_LPON) */
+		{ 0x820fc000, 0xa4600, 0x0200 }, /* WF_LMAC_TOP BN1 (WF_INT) */
+		{ 0x820fd000, 0xa4800, 0x0800 }, /* WF_LMAC_TOP BN1 (WF_MIB) */
+	};
+	int i;
+
+	if (addr < 0x100000)
+		return addr;
+
+	for (i = 0; i < ARRAY_SIZE(fixed_map); i++) {
+		u32 ofs;
+
+		if (addr < fixed_map[i].phys)
+			continue;
+
+		ofs = addr - fixed_map[i].phys;
+		if (ofs > fixed_map[i].size)
+			continue;
+
+		return fixed_map[i].mapped + ofs;
+	}
+
+	if ((addr >= 0x18000000 && addr < 0x18c00000) ||
+	    (addr >= 0x70000000 && addr < 0x78000000) ||
+	    (addr >= 0x7c000000 && addr < 0x7c400000))
+		return mt7921_reg_map_l1(dev, addr);
+
+	dev_err(dev->mt76.dev, "Access currently unsupported address %08x\n",
+		addr);
+
+	return 0;
+}
+
+static u32 mt7921_rr(struct mt76_dev *mdev, u32 offset)
+{
+	struct mt7921_dev *dev = container_of(mdev, struct mt7921_dev, mt76);
+	u32 addr = __mt7921_reg_addr(dev, offset);
+
+	return dev->bus_ops->rr(mdev, addr);
+}
+
+static void mt7921_wr(struct mt76_dev *mdev, u32 offset, u32 val)
+{
+	struct mt7921_dev *dev = container_of(mdev, struct mt7921_dev, mt76);
+	u32 addr = __mt7921_reg_addr(dev, offset);
+
+	dev->bus_ops->wr(mdev, addr, val);
+}
+
+static u32 mt7921_rmw(struct mt76_dev *mdev, u32 offset, u32 mask, u32 val)
+{
+	struct mt7921_dev *dev = container_of(mdev, struct mt7921_dev, mt76);
+	u32 addr = __mt7921_reg_addr(dev, offset);
+
+	return dev->bus_ops->rmw(mdev, addr, mask, val);
+}
+
+
 static int mt7921_pci_probe(struct pci_dev *pdev,
 			    const struct pci_device_id *id)
 {
@@ -110,6 +214,7 @@ static int mt7921_pci_probe(struct pci_d
 		.sta_remove = mt7921_mac_sta_remove,
 		.update_survey = mt7921_update_channel,
 	};
+	struct mt76_bus_ops *bus_ops;
 	struct mt7921_dev *dev;
 	struct mt76_dev *mdev;
 	int ret;
@@ -145,6 +250,22 @@ static int mt7921_pci_probe(struct pci_d
 
 	mt76_mmio_init(&dev->mt76, pcim_iomap_table(pdev)[0]);
 	tasklet_init(&dev->irq_tasklet, mt7921_irq_tasklet, (unsigned long)dev);
+
+	dev->bus_ops = dev->mt76.bus;
+	bus_ops = devm_kmemdup(dev->mt76.dev, dev->bus_ops, sizeof(*bus_ops),
+			       GFP_KERNEL);
+	if (!bus_ops)
+		return -ENOMEM;
+
+	bus_ops->rr = mt7921_rr;
+	bus_ops->wr = mt7921_wr;
+	bus_ops->rmw = mt7921_rmw;
+	dev->mt76.bus = bus_ops;
+
+	ret = __mt7921_mcu_drv_pmctrl(dev);
+	if (ret)
+		return ret;
+
 	mdev->rev = (mt7921_l1_rr(dev, MT_HW_CHIPID) << 16) |
 		    (mt7921_l1_rr(dev, MT_HW_REV) & 0xff);
 	dev_err(mdev->dev, "ASIC revision: %04x\n", mdev->rev);

[PATCH 5.15 131/132] i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit a2537c98a8a3b57002e54a262d180b9490bc7190 ]

Fix the missing clk_disable_unprepare() before return
from mtk_i2c_probe() in the error handling case.

Fixes: d04913ec5f89 ("i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-mt7621.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mt7621.c b/drivers/i2c/busses/i2c-mt7621.c
index 45fe4a7fe0c0..901f0fb04fee 100644
--- a/drivers/i2c/busses/i2c-mt7621.c
+++ b/drivers/i2c/busses/i2c-mt7621.c
@@ -304,7 +304,8 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 
 	if (i2c->bus_freq == 0) {
 		dev_warn(i2c->dev, "clock-frequency 0 not supported\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err_disable_clk;
 	}
 
 	adap = &i2c->adap;
@@ -322,10 +323,15 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(adap);
 	if (ret < 0)
-		return ret;
+		goto err_disable_clk;
 
 	dev_info(&pdev->dev, "clock %u kHz\n", i2c->bus_freq / 1000);
 
+	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(i2c->clk);
+
 	return ret;
 }
 
-- 
2.35.1

[PATCH 5.15 132/132] afs: Fix afs_getattr() to refetch file status if callback break occurred

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 2aeb8c86d49967552394d5e723f87454cb53f501 ]

If a callback break occurs (change notification), afs_getattr() needs to
issue an FS.FetchStatus RPC operation to update the status of the file
being examined by the stat-family of system calls.

Fix afs_getattr() to do this if AFS_VNODE_CB_PROMISED has been cleared
on a vnode by a callback break.  Skip this if AT_STATX_DONT_SYNC is set.

This can be tested by appending to a file on one AFS client and then
using "stat -L" to examine its length on a machine running kafs.  This
can also be watched through tracing on the kafs machine.  The callback
break is seen:

     kworker/1:1-46      [001] .....   978.910812: afs_cb_call: c=0000005f YFSCB.CallBack
     kworker/1:1-46      [001] ...1.   978.910829: afs_cb_break: 100058:23b4c:242d2c2 b=2 s=1 break-cb
     kworker/1:1-46      [001] .....   978.911062: afs_call_done:    c=0000005f ret=0 ab=0 [0000000082994ead]

And then the stat command generated no traffic if unpatched, but with
this change a call to fetch the status can be observed:

            stat-4471    [000] .....   986.744122: afs_make_fs_call: c=000000ab 100058:023b4c:242d2c2 YFS.FetchStatus
            stat-4471    [000] .....   986.745578: afs_call_done:    c=000000ab ret=0 ab=0 [0000000087fc8c84]

Fixes: 08e0e7c82eea ("[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
Tested-by: kafs-testing+fedora34_64checkkafs-build-496@auristor.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216010
Link: https://lore.kernel.org/r/165308359800.162686.14122417881564420962.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/inode.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 8fcffea2daf5..a47666ba48f5 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -728,10 +728,22 @@ int afs_getattr(struct user_namespace *mnt_userns, const struct path *path,
 {
 	struct inode *inode = d_inode(path->dentry);
 	struct afs_vnode *vnode = AFS_FS_I(inode);
-	int seq = 0;
+	struct key *key;
+	int ret, seq = 0;
 
 	_enter("{ ino=%lu v=%u }", inode->i_ino, inode->i_generation);
 
+	if (!(query_flags & AT_STATX_DONT_SYNC) &&
+	    !test_bit(AFS_VNODE_CB_PROMISED, &vnode->flags)) {
+		key = afs_request_key(vnode->volume->cell);
+		if (IS_ERR(key))
+			return PTR_ERR(key);
+		ret = afs_validate(vnode, key);
+		key_put(key);
+		if (ret < 0)
+			return ret;
+	}
+
 	do {
 		read_seqbegin_or_lock(&vnode->cb_lock, &seq);
 		generic_fillattr(&init_user_ns, inode, stat);
-- 
2.35.1

Re: [PATCH 5.15 000/132] 5.15.42-rc1 review

[Florian Fainelli]

On 5/23/22 10:03, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.42 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 25 May 2022 16:56:55 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.42-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.15 000/132] 5.15.42-rc1 review

[Shuah Khan]

On 5/23/22 11:03 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.42 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 25 May 2022 16:56:55 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.42-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.15 000/132] 5.15.42-rc1 review

[Naresh Kamboju]

On Mon, 23 May 2022 at 22:37, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.15.42 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 25 May 2022 16:56:55 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.42-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.15.42-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.15.y
* git commit: 03faf123d8c854ca0eafbd28c2b2f11e2a3de61f
* git describe: v5.15.41-133-g03faf123d8c8
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.41-133-g03faf123d8c8

## Test Regressions (compared to v5.15.40-103-g293cfb310f44)
No test regressions found.

## Metric Regressions (compared to v5.15.40-103-g293cfb310f44)
No metric regressions found.

## Test Fixes (compared to v5.15.40-103-g293cfb310f44)
No test fixes found.

## Metric Fixes (compared to v5.15.40-103-g293cfb310f44)
No metric fixes found.

## Test result summary
total: 98644, pass: 83692, fail: 622, skip: 13281, xfail: 1049

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 296 total, 293 passed, 3 failed
* arm64: 47 total, 47 passed, 0 failed
* i386: 44 total, 40 passed, 4 failed
* mips: 41 total, 38 passed, 3 failed
* parisc: 14 total, 14 passed, 0 failed
* powerpc: 59 total, 56 passed, 3 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 26 total, 23 passed, 3 failed
* sh: 26 total, 24 passed, 2 failed
* sparc: 14 total, 14 passed, 0 failed
* x86_64: 47 total, 46 passed, 1 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.15 098/132] mptcp: strict local address ID selection

[Mat Martineau]

On Mon, 23 May 2022, Greg Kroah-Hartman wrote:

> From: Paolo Abeni <pabeni@redhat.com>
>
> [ Upstream commit 4cf86ae84c718333928fd2d43168a1e359a28329 ]
>
> The address ID selection for MPJ subflows created in response
> to incoming ADD_ADDR option is currently unreliable: it happens
> at MPJ socket creation time, when the local address could be
> unknown.
>
> Additionally, if the no local endpoint is available for the local
> address, a new dummy endpoint is created, confusing the user-land.
>
> This change refactor the code to move the address ID selection inside
> the rebuild_header() helper, when the local address eventually
> selected by the route lookup is finally known. If the address used
> is not mapped by any endpoint - and thus can't be advertised/removed
> pick the id 0 instead of allocate a new endpoint.
>
> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
> net/mptcp/pm_netlink.c | 13 --------
> net/mptcp/protocol.c   |  3 ++
> net/mptcp/protocol.h   |  3 +-
> net/mptcp/subflow.c    | 67 ++++++++++++++++++++++++++++++++++++------
> 4 files changed, 63 insertions(+), 23 deletions(-)
>

Greg, Sasha -

Same issue with this patch as

[PATCH 5.17 114/158] mptcp: strict local address ID selection

so hopefully you can drop this one but keep "mptcp: Do TCP fallback on 
early DSS checksum failure".


Details on the 5.17.10-rc1 thread:

https://lore.kernel.org/stable/fa953ec-288f-7715-c6fb-47a222e85270@linux.intel.com/


Thanks,

--
Mat Martineau
Intel

RE: [PATCH 5.15 000/132] 5.15.42-rc1 review

[Fox Chen]

On Mon, 23 May 2022 19:03:29 +0200, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.15.42 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 25 May 2022 16:56:55 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.42-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

5.15.42-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
                
Tested-by: Fox Chen <foxhlchen@gmail.com>

Re: [PATCH 5.15 000/132] 5.15.42-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, May 23, 2022 at 07:03:29PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.42 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 25 May 2022 16:56:55 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.3.1 20220517): 62 configs -> no failure
arm (gcc version 11.3.1 20220517): 100 configs -> no new failure
arm64 (gcc version 11.3.1 20220517): 3 configs -> no failure
x86_64 (gcc version 11.3.1 20220517): 4 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
mips: Booted on ci20 board. No regression. [3]

[1]. https://openqa.qa.codethink.co.uk/tests/1199
[2]. https://openqa.qa.codethink.co.uk/tests/1202
[3]. https://openqa.qa.codethink.co.uk/tests/1203

Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 5.15 000/132] 5.15.42-rc1 review

[Ron Economos]

On 5/23/22 10:03 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.42 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 25 May 2022 16:56:55 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.42-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 5.15 000/132] 5.15.42-rc1 review

[Guenter Roeck]

On Mon, May 23, 2022 at 07:03:29PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.42 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 25 May 2022 16:56:55 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 156 pass: 156 fail: 0
Qemu test results:
	total: 488 pass: 488 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.15 000/132] 5.15.42-rc1 review

[Khalid Masum]

On Mon, May 23, 2022 at 11:08 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.15.42 release.
> There are 132 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 25 May 2022 16:56:55 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.42-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Compiled and booted on my arch x86_64 system. No dmesg regressions.

Tested-by: Khalid Masum<khalid.masum.92@gmail.com>

thanks,
-- Khalid Masum