From: Paul Walmsley <paul@pwsan.com>
To: Sekhar Nori <nsekhar@ti.com>, Suman Anna <s-anna@ti.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
d-gerlach@ti.com
Cc: Tony Lindgren <tony@atomide.com>,
Bjorn Helgaas <bhelgaas@google.com>,
richardcochran@gmail.com, Russell King <linux@arm.linux.org.uk>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 3/3] pci: dra7xx: use pdata callbacks to perform reset
Date: Thu, 18 Feb 2016 17:23:53 +0000 (UTC) [thread overview]
Message-ID: <alpine.DEB.2.02.1602181721530.4792@utopia.booyaka.com> (raw)
In-Reply-To: <56C5D377.50901@ti.com>
On Thu, 18 Feb 2016, Sekhar Nori wrote:
> On Friday 12 February 2016 10:50 PM, Suman Anna wrote:
> > Sekhar,
> > Will you be following up with above suggestion since Kishon is gonna be out?
>
> Alright, noticed this action for me :) Went through the thread, and
> looks like this is what we want to see?
Thanks Sekhar. Did you try the driver unbind/bind sequence a few times to
ensure that works, per Suman's earlier E-mail?
Suman, is there any further testing that you are planning to do on this
patch?
- Paul
>
> Thanks,
> Sekhar
>
> ---8<---
> >From e3ba368f2235e1bf38a22ba8ea4e5c12aaafda19 Mon Sep 17 00:00:00 2001
> Message-Id: <e3ba368f2235e1bf38a22ba8ea4e5c12aaafda19.1455803758.git.nsekhar@ti.com>
> From: Sekhar Nori <nsekhar@ti.com>
> Date: Thu, 18 Feb 2016 16:49:56 +0530
> Subject: [PATCH 1/1] ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
>
> Add a custom reset handler for DRA7x PCIeSS. This
> handler is required to deassert PCIe hardreset lines
> after they have been asserted.
>
> This enables the PCIe driver to access registers after
> PCIeSS has been runtime enabled without having to
> deassert hardreset lines itself.
>
> With this patch applied, used lspci to make sure
> connected PCIe device enumerates on DRA74x and DRA72x
> EVMs.
>
> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
> ---
> Applies to tag for-v4.6/omap-hwmod-a of Paul W's tree.
>
> arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> index b61355e2a771..252b74633e31 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
> @@ -1526,8 +1526,31 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = {
> *
> */
>
> +/*
> + * As noted in documentation for _reset() in omap_hwmod.c, the stock reset
> + * functionality of OMAP HWMOD layer does not deassert the hardreset lines
> + * associated with an IP automatically leaving the driver to handle that
> + * by itself. This does not work for PCIeSS which needs the reset lines
> + * deasserted for the driver to start accessing registers.
> + *
> + * We use a PCIeSS HWMOD class specific reset handler to deassert the hardreset
> + * lines after asserting them.
> + */
> +static int dra7xx_pciess_reset(struct omap_hwmod *oh)
> +{
> + int i;
> +
> + for (i = 0; i < oh->rst_lines_cnt; i++) {
> + omap_hwmod_assert_hardreset(oh, oh->rst_lines[i].name);
> + omap_hwmod_deassert_hardreset(oh, oh->rst_lines[i].name);
> + }
> +
> + return 0;
> +}
> +
> static struct omap_hwmod_class dra7xx_pciess_hwmod_class = {
> .name = "pcie",
> + .reset = dra7xx_pciess_reset,
> };
>
> /* pcie1 */
> --
> 2.6.3
>
>
- Paul
next prev parent reply other threads:[~2016-02-18 17:23 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-14 14:11 [PATCH v3 0/3] dra7xx: get pcie working in mainline Kishon Vijay Abraham I
2016-01-14 14:11 ` [PATCH v3 1/3] ARM: DRA7: hwmod: Add reset data for PCIe Kishon Vijay Abraham I
2016-02-08 1:50 ` Paul Walmsley
2016-01-14 14:11 ` [PATCH v3 2/3] ARM: DRA7: add pdata-quirks to do reset of PCIe Kishon Vijay Abraham I
2016-01-15 19:19 ` Suman Anna
2016-01-15 19:22 ` Tony Lindgren
2016-01-15 19:41 ` Suman Anna
2016-01-18 9:12 ` Sekhar Nori
2016-01-27 17:23 ` Tony Lindgren
2016-01-14 14:11 ` [PATCH v3 3/3] pci: dra7xx: use pdata callbacks to perform reset Kishon Vijay Abraham I
2016-01-27 17:31 ` Tony Lindgren
2016-01-27 18:16 ` Suman Anna
2016-01-27 18:56 ` Tony Lindgren
2016-01-27 23:16 ` Suman Anna
2016-01-28 18:31 ` Tony Lindgren
2016-01-28 21:15 ` Suman Anna
2016-02-02 10:40 ` Kishon Vijay Abraham I
2016-02-05 4:19 ` Kishon Vijay Abraham I
2016-02-08 2:48 ` Paul Walmsley
2016-02-08 20:56 ` Suman Anna
2016-02-09 8:49 ` Paul Walmsley
2016-02-09 17:40 ` Suman Anna
2016-02-09 19:36 ` Paul Walmsley
2016-02-10 1:42 ` Suman Anna
2016-02-10 5:38 ` Kishon Vijay Abraham I
2016-02-11 19:27 ` Paul Walmsley
2016-02-11 22:04 ` Suman Anna
2016-02-12 6:49 ` Kishon Vijay Abraham I
2016-02-12 17:20 ` Suman Anna
2016-02-18 14:21 ` Sekhar Nori
2016-02-18 17:23 ` Paul Walmsley [this message]
2016-02-18 18:27 ` Suman Anna
2016-02-22 6:18 ` Kishon Vijay Abraham I
2016-02-22 6:31 ` Paul Walmsley
2016-02-22 9:55 ` Kishon Vijay Abraham I
2016-02-23 11:57 ` Kishon Vijay Abraham I
2016-02-23 18:28 ` Paul Walmsley
2016-02-24 6:21 ` Kishon Vijay Abraham I
2016-03-01 8:25 ` Paul Walmsley
2016-03-01 11:55 ` Kishon Vijay Abraham I
2016-03-01 14:43 ` Bjorn Helgaas
2016-03-01 16:55 ` Suman Anna
2016-02-11 20:43 ` Suman Anna
2016-02-12 6:55 ` Kishon Vijay Abraham I
2016-02-10 5:36 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.02.1602181721530.4792@utopia.booyaka.com \
--to=paul@pwsan.com \
--cc=bhelgaas@google.com \
--cc=d-gerlach@ti.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=nsekhar@ti.com \
--cc=richardcochran@gmail.com \
--cc=s-anna@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).