From: "Robert P. J. Day" <rpjday@crashcourse.ca> To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: Rodolfo Giometti <giometti@enneenne.com>, akpm@linux-foundation.org Subject: [PATCH] PPS: Use surrounding "if PPS" to remove numerous dependency checks Date: Sat, 26 Aug 2017 10:55:22 -0400 (EDT) Message-ID: <alpine.LFD.2.20.1708261050500.8156@localhost.localdomain> (raw) Adding high-level "if PPS" makes lower-level dependency tests superfluous. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> --- since this actually changed functional code, i wanted to submit it separately. seems to be equivalent, unless i screwed something up. diff --git a/drivers/pps/Kconfig b/drivers/pps/Kconfig index 4b29a71..c6008f2 100644 --- a/drivers/pps/Kconfig +++ b/drivers/pps/Kconfig @@ -19,9 +19,10 @@ menuconfig PPS To compile this driver as a module, choose M here: the module will be called pps_core.ko. +if PPS + config PPS_DEBUG bool "PPS debugging messages" - depends on PPS help Say Y here if you want the PPS support to produce a bunch of debug messages to the system log. Select this if you are having a @@ -29,7 +30,7 @@ config PPS_DEBUG config NTP_PPS bool "PPS kernel consumer support" - depends on PPS && !NO_HZ_COMMON + depends on !NO_HZ_COMMON help This option adds support for direct in-kernel time synchronization using an external PPS signal. @@ -39,3 +40,5 @@ config NTP_PPS source drivers/pps/clients/Kconfig source drivers/pps/generators/Kconfig + +endif # PPS diff --git a/drivers/pps/clients/Kconfig b/drivers/pps/clients/Kconfig index efec021..7f02a9b 100644 --- a/drivers/pps/clients/Kconfig +++ b/drivers/pps/clients/Kconfig @@ -3,11 +3,9 @@ # comment "PPS clients support" - depends on PPS config PPS_CLIENT_KTIMER tristate "Kernel timer client (Testing client, use for debug)" - depends on PPS help If you say yes here you get support for a PPS debugging client which uses a kernel timer to generate the PPS signal. @@ -17,21 +15,20 @@ config PPS_CLIENT_KTIMER config PPS_CLIENT_LDISC tristate "PPS line discipline" - depends on PPS && TTY + depends on TTY help If you say yes here you get support for a PPS source connected with the CD (Carrier Detect) pin of your serial port. config PPS_CLIENT_PARPORT tristate "Parallel port PPS client" - depends on PPS && PARPORT + depends on PARPORT help If you say yes here you get support for a PPS source connected with the interrupt pin of your parallel port. config PPS_CLIENT_GPIO tristate "PPS client using GPIO" - depends on PPS help If you say yes here you get support for a PPS source using GPIO. To be useful you must also register a platform device diff --git a/drivers/pps/generators/Kconfig b/drivers/pps/generators/Kconfig index 86b5937..e4c4f3d 100644 --- a/drivers/pps/generators/Kconfig +++ b/drivers/pps/generators/Kconfig @@ -3,11 +3,10 @@ # comment "PPS generators support" - depends on PPS config PPS_GENERATOR_PARPORT tristate "Parallel port PPS signal generator" - depends on PPS && PARPORT && BROKEN + depends on PARPORT && BROKEN help If you say yes here you get support for a PPS signal generator which utilizes STROBE pin of a parallel port to send PPS signals. It uses -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ========================================================================
next reply index Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-08-26 14:55 Robert P. J. Day [this message] 2017-08-28 9:39 ` Rodolfo Giometti
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=alpine.LFD.2.20.1708261050500.8156@localhost.localdomain \ --to=rpjday@crashcourse.ca \ --cc=akpm@linux-foundation.org \ --cc=giometti@enneenne.com \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
LKML Archive on lore.kernel.org Archives are clonable: git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \ linux-kernel@vger.kernel.org public-inbox-index lkml Example config snippet for mirrors Newsgroup available over NNTP: nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel AGPL code for this site: git clone https://public-inbox.org/public-inbox.git